Merge 4.14.60 into android-4.14

Changes in 4.14.60
fork: unconditionally clear stack on fork
i2c: core: decrease reference count of device node in i2c_unregister_device
RDMA/core: Avoid that ib_drain_qp() triggers an out-of-bounds stack access
drivers/infiniband/core/verbs.c: fix build with gcc-4.4.4
IB/srpt: Fix an out-of-bounds stack access in srpt_zerolength_write()
drivers/infiniband/ulp/srpt/ib_srpt.c: fix build with gcc-4.4.4
spi: spi-s3c64xx: Fix system resume support
Input: elan_i2c - add ACPI ID for lenovo ideapad 330
Input: i8042 - add Lenovo LaVie Z to the i8042 reset list
Input: elan_i2c - add another ACPI ID for Lenovo Ideapad 330-15AST
kvm, mm: account shadow page tables to kmemcg
delayacct: fix crash in delayacct_blkio_end() after delayacct init failure
tracing: Fix double free of event_trigger_data
tracing: Fix possible double free in event_enable_trigger_func()
kthread, tracing: Don't expose half-written comm when creating kthreads
tracing/kprobes: Fix trace_probe flags on enable_trace_kprobe() failure
tracing: Quiet gcc warning about maybe unused link variable
arm64: fix vmemmap BUILD_BUG_ON() triggering on !vmemmap setups
mlxsw: spectrum_switchdev: Fix port_vlan refcounting
kcov: ensure irq code sees a valid area
xen/netfront: raise max number of slots in xennet_get_responses()
hv_netvsc: fix network namespace issues with VF support
skip LAYOUTRETURN if layout is invalid
ALSA: emu10k1: add error handling for snd_ctl_add
ALSA: fm801: add error handling for snd_ctl_add
NFSv4.1: Fix the client behaviour on NFS4ERR_SEQ_FALSE_RETRY
nfsd: fix potential use-after-free in nfsd4_decode_getdeviceinfo
vfio: platform: Fix reset module leak in error path
vfio/mdev: Check globally for duplicate devices
vfio/type1: Fix task tracking for QEMU vCPU hotplug
kernel/hung_task.c: show all hung tasks before panic
mm: /proc/pid/pagemap: hide swap entries from unprivileged users
mm: vmalloc: avoid racy handling of debugobjects in vunmap
mm/slub.c: add __printf verification to slab_err()
rtc: ensure rtc_set_alarm fails when alarms are not supported
perf tools: Fix pmu events parsing rule
netfilter: ipset: forbid family for hash:mac sets
netfilter: ipset: List timing out entries with "timeout 1" instead of zero
irqchip/ls-scfg-msi: Map MSIs in the iommu
watchdog: da9063: Fix updating timeout value
printk: drop in_nmi check from printk_safe_flush_on_panic()
bpf, arm32: fix inconsistent naming about emit_a32_lsr_{r64,i64}
ceph: fix alignment of rasize
e1000e: Ignore TSYNCRXCTL when getting I219 clock attributes
infiniband: fix a possible use-after-free bug
powerpc/lib: Adjust .balign inside string functions for PPC32
powerpc/64s: Add barrier_nospec
powerpc/eeh: Fix use-after-release of EEH driver
hvc_opal: don't set tb_ticks_per_usec in udbg_init_opal_common()
powerpc/64s: Fix compiler store ordering to SLB shadow area
RDMA/mad: Convert BUG_ONs to error flows
lightnvm: pblk: warn in case of corrupted write buffer
netfilter: nf_tables: check msg_type before nft_trans_set(trans)
pnfs: Don't release the sequence slot until we've processed layoutget on open
disable loading f2fs module on PAGE_SIZE > 4KB
f2fs: fix error path of move_data_page
f2fs: fix to don't trigger writeback during recovery
f2fs: fix to wait page writeback during revoking atomic write
f2fs: Fix deadlock in shutdown ioctl
f2fs: fix to detect failure of dquot_initialize
f2fs: fix race in between GC and atomic open
block, bfq: remove wrong lock in bfq_requests_merged
usbip: usbip_detach: Fix memory, udev context and udev leak
usbip: dynamically allocate idev by nports found in sysfs
perf/x86/intel/uncore: Correct fixed counter index check in generic code
perf/x86/intel/uncore: Correct fixed counter index check for NHM
selftests/intel_pstate: Improve test, minor fixes
selftests: memfd: return Kselftest Skip code for skipped tests
selftests: intel_pstate: return Kselftest Skip code for skipped tests
PCI: Fix devm_pci_alloc_host_bridge() memory leak
btrfs: balance dirty metadata pages in btrfs_finish_ordered_io
iwlwifi: pcie: fix race in Rx buffer allocator
Bluetooth: hci_qca: Fix "Sleep inside atomic section" warning
Bluetooth: btusb: Add a new Realtek 8723DE ID 2ff8:b011
ASoC: dpcm: fix BE dai not hw_free and shutdown
mfd: cros_ec: Fail early if we cannot identify the EC
mwifiex: handle race during mwifiex_usb_disconnect
wlcore: sdio: check for valid platform device data before suspend
net: hns3: Fixes the init of the VALID BD info in the descriptor
media: tw686x: Fix incorrect vb2_mem_ops GFP flags
media: videobuf2-core: don't call memop 'finish' when queueing
Btrfs: don't return ino to ino cache if inode item removal fails
Btrfs: don't BUG_ON() in btrfs_truncate_inode_items()
btrfs: add barriers to btrfs_sync_log before log_commit_wait wakeups
btrfs: qgroup: Finish rescan when hit the last leaf of extent tree
x86/microcode: Make the late update update_lock a raw lock for RT
PM / wakeup: Make s2idle_lock a RAW_SPINLOCK
PCI: Prevent sysfs disable of device while driver is attached
nvme-rdma: stop admin queue before freeing it
nvme-pci: Fix AER reset handling
ath: Add regulatory mapping for FCC3_ETSIC
ath: Add regulatory mapping for ETSI8_WORLD
ath: Add regulatory mapping for APL13_WORLD
ath: Add regulatory mapping for APL2_FCCA
ath: Add regulatory mapping for Uganda
ath: Add regulatory mapping for Tanzania
ath: Add regulatory mapping for Serbia
ath: Add regulatory mapping for Bermuda
ath: Add regulatory mapping for Bahamas
powerpc/32: Add a missing include header
powerpc/chrp/time: Make some functions static, add missing header include
powerpc/powermac: Add missing prototype for note_bootable_part()
powerpc/powermac: Mark variable x as unused
powerpc: Add __printf verification to prom_printf
spi: sh-msiof: Fix setting SIRMDR1.SYNCAC to match SITMDR1.SYNCAC
powerpc/8xx: fix invalid register expression in head_8xx.S
pinctrl: at91-pio4: add missing of_node_put
bpf: powerpc64: pad function address loads with NOPs
PCI: pciehp: Request control of native hotplug only if supported
net: dsa: qca8k: Add support for QCA8334 switch
mwifiex: correct histogram data with appropriate index
ima: based on policy verify firmware signatures (pre-allocated buffer)
drivers/perf: arm-ccn: don't log to dmesg in event_init
spi: Add missing pm_runtime_put_noidle() after failed get
net: hns3: Fix the missing client list node initialization
fscrypt: use unbound workqueue for decryption
scsi: ufs: ufshcd: fix possible unclocked register access
scsi: ufs: fix exception event handling
scsi: zfcp: assert that the ERP lock is held when tracing a recovery trigger
drm/nouveau/fifo/gk104-: poll for runlist update completion
Bluetooth: btusb: add ID for LiteOn 04ca:301a
rtc: tps6586x: fix possible race condition
rtc: vr41xx: fix possible race condition
rtc: tps65910: fix possible race condition
ALSA: emu10k1: Rate-limit error messages about page errors
regulator: pfuze100: add .is_enable() for pfuze100_swb_regulator_ops
md/raid1: add error handling of read error from FailFast device
md: fix NULL dereference of mddev->pers in remove_and_add_spares()
ixgbevf: fix MAC address changes through ixgbevf_set_mac()
media: smiapp: fix timeout checking in smiapp_read_nvm
net: ethernet: ti: cpsw-phy-sel: check bus_find_device() ret value
ALSA: usb-audio: Apply rate limit to warning messages in URB complete callback
media: atomisp: ov2680: don't declare unused vars
arm64: cmpwait: Clear event register before arming exclusive monitor
HID: hid-plantronics: Re-resend Update to map button for PTT products
arm64: dts: renesas: salvator-common: use audio-graph-card for Sound
drm/radeon: fix mode_valid's return type
drm/amdgpu: Remove VRAM from shared bo domains.
powerpc/embedded6xx/hlwd-pic: Prevent interrupts from being handled by Starlet
HID: i2c-hid: check if device is there before really probing
EDAC, altera: Fix ARM64 build warning
ARM: dts: stih407-pinctrl: Fix complain about IRQ_TYPE_NONE usage
ARM: dts: emev2: Add missing interrupt-affinity to PMU node
ARM: dts: sh73a0: Add missing interrupt-affinity to PMU node
nvmem: properly handle returned value nvmem_reg_read
i40e: free the skb after clearing the bitlock
tty: Fix data race in tty_insert_flip_string_fixed_flag
dma-iommu: Fix compilation when !CONFIG_IOMMU_DMA
net: phy: phylink: Release link GPIO
media: rcar_jpu: Add missing clk_disable_unprepare() on error in jpu_open()
libata: Fix command retry decision
ACPI / LPSS: Only call pwm_add_table() for Bay Trail PWM if PMIC HRV is 2
media: media-device: fix ioctl function types
media: saa7164: Fix driver name in debug output
mtd: rawnand: fsl_ifc: fix FSL NAND driver to read all ONFI parameter pages
brcmfmac: Add support for bcm43364 wireless chipset
s390/cpum_sf: Add data entry sizes to sampling trailer entry
perf: fix invalid bit in diagnostic entry
bnxt_en: Check unsupported speeds in bnxt_update_link() on PF only.
scsi: 3w-9xxx: fix a missing-check bug
scsi: 3w-xxxx: fix a missing-check bug
scsi: megaraid: silence a static checker bug
scsi: hisi_sas: config ATA de-reset as an constrained command for v3 hw
scsi: qedf: Set the UNLOADING flag when removing a vport
staging: lustre: o2iblnd: fix race at kiblnd_connect_peer
staging: lustre: o2iblnd: Fix FastReg map/unmap for MLX5
thermal: exynos: fix setting rising_threshold for Exynos5433
bpf: fix references to free_bpf_prog_info() in comments
f2fs: avoid fsync() failure caused by EAGAIN in writepage()
media: siano: get rid of __le32/__le16 cast warnings
drm/atomic: Handling the case when setting old crtc for plane
ALSA: hda/ca0132: fix build failure when a local macro is defined
mmc: dw_mmc: update actual clock for mmc debugfs
mmc: pwrseq: Use kmalloc_array instead of stack VLA
dt-bindings: pinctrl: meson: add support for the Meson8m2 SoC
spi: meson-spicc: Fix error handling in meson_spicc_probe()
net: hns3: Fixes the out of bounds access in hclge_map_tqp
dt-bindings: net: meson-dwmac: new compatible name for AXG SoC
backlight: pwm_bl: Don't use GPIOF_* with gpiod_get_direction
stop_machine: Use raw spinlocks
delayacct: Use raw_spinlocks
memory: tegra: Do not handle spurious interrupts
memory: tegra: Apply interrupts mask per SoC
nvme: lightnvm: add granby support
arm64: defconfig: Enable Rockchip io-domain driver
igb: Fix queue selection on MAC filters on i210
drm/gma500: fix psb_intel_lvds_mode_valid()'s return type
ipconfig: Correctly initialise ic_nameservers
rsi: Fix 'invalid vdd' warning in mmc
rsi: fix nommu_map_sg overflow kernel panic
audit: allow not equal op for audit by executable
staging: vchiq_core: Fix missing semaphore release in error case
staging: lustre: llite: correct removexattr detection
staging: lustre: ldlm: free resource when ldlm_lock_create() fails.
serial: core: Make sure compiler barfs for 16-byte earlycon names
soc: imx: gpcv2: Do not pass static memory as platform data
microblaze: Fix simpleImage format generation
usb: hub: Don't wait for connect state at resume for powered-off ports
crypto: authencesn - don't leak pointers to authenc keys
crypto: authenc - don't leak pointers to authenc keys
media: omap3isp: fix unbalanced dma_iommu_mapping
regulator: Don't return or expect -errno from of_map_mode()
scsi: scsi_dh: replace too broad "TP9" string with the exact models
scsi: megaraid_sas: Increase timeout by 1 sec for non-RAID fastpath IOs
scsi: cxlflash: Synchronize reset and remove ops
scsi: cxlflash: Avoid clobbering context control register value
media: atomisp: compat32: fix __user annotations
media: si470x: fix __be16 annotations
ASoC: topology: Fix bclk and fsync inversion in set_link_hw_format()
ASoC: topology: Add missing clock gating parameter when parsing hw_configs
drm: Add DP PSR2 sink enable bit
drm/atomic-helper: Drop plane->fb references only for drm_atomic_helper_shutdown()
drm/dp/mst: Fix off-by-one typo when dump payload table
block: bio_iov_iter_get_pages: fix size of last iovec
blkdev: __blkdev_direct_IO_simple: fix leak in error case
block: reset bi_iter.bi_done after splitting bio
random: mix rdrand with entropy sent in from userspace
squashfs: be more careful about metadata corruption
ext4: fix inline data updates with checksums enabled
ext4: check for allocation block validity with block group locked
ext4: fix check to prevent initializing reserved inodes
PCI: pciehp: Assume NoCompl+ for Thunderbolt ports
PCI: xgene: Remove leftover pci_scan_child_bus() call
ovl: Sync upper dirty data when syncing overlayfs
usb: gadget: udc: renesas_usb3: should remove debugfs
RDMA/uverbs: Protect from attempts to create flows on unsupported QP
net: dsa: qca8k: Force CPU port to its highest bandwidth
net: dsa: qca8k: Enable RXMAC when bringing up a port
net: dsa: qca8k: Add QCA8334 binding documentation
net: dsa: qca8k: Allow overwriting CPU port setting
ipv4: remove BUG_ON() from fib_compute_spec_dst
net: ena: Fix use of uninitialized DMA address bits field
net: fix amd-xgbe flow-control issue
net: lan78xx: fix rx handling before first packet is send
net: mdio-mux: bcm-iproc: fix wrong getter and setter pair
NET: stmmac: align DMA stuff to largest cache line length
tcp_bbr: fix bw probing to raise in-flight data for very small BDPs
xen-netfront: wait xenbus state change when load module manually
netlink: Do not subscribe to non-existent groups
netlink: Don't shift with UB on nlk->ngroups
tcp: do not force quickack when receiving out-of-order packets
tcp: add max_quickacks param to tcp_incr_quickack and tcp_enter_quickack_mode
tcp: do not aggressively quick ack after ECN events
tcp: refactor tcp_ecn_check_ce to remove sk type cast
tcp: add one more quick ack after after ECN events
Linux 4.14.60

Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Linux 4.14.60

tcp: add one more quick ack after after ECN events

[ Upstream commit 15ecbe94a45ef88491ca459b26efdd02f91edb6d ]

Larry Brakmo proposal ( https://patchwork.ozlabs.org/patch/935233/
tcp: force cwnd at least 2 in tcp_cwnd_reduction) made us rethink
about our recent patch removing ~16 quick acks after ECN events.

tcp_enter_quickack_mode(sk, 1) makes sure one immediate ack is sent,
but in the case the sender cwnd was lowered to 1, we do not want
to have a delayed ack for the next packet we will receive.

Fixes: 522040ea5fdd ("tcp: do not aggressively quick ack after ECN events")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Neal Cardwell <ncardwell@google.com>
Cc: Lawrence Brakmo <brakmo@fb.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tcp: refactor tcp_ecn_check_ce to remove sk type cast

[ Upstream commit f4c9f85f3b2cb7669830cd04d0be61192a4d2436 ]

Refactor tcp_ecn_check_ce and __tcp_ecn_check_ce to accept struct sock*
instead of tcp_sock* to clean up type casts. This is a pure refactor
patch.

Signed-off-by: Yousuk Seung <ysseung@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tcp: do not aggressively quick ack after ECN events

[ Upstream commit 522040ea5fdd1c33bbf75e1d7c7c0422b96a94ef ]

ECN signals currently forces TCP to enter quickack mode for
up to 16 (TCP_MAX_QUICKACKS) following incoming packets.

We believe this is not needed, and only sending one immediate ack
for the current packet should be enough.

This should reduce the extra load noticed in DCTCP environments,
after congestion events.

This is part 2 of our effort to reduce pure ACK packets.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Acked-by: Yuchung Cheng <ycheng@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tcp: add max_quickacks param to tcp_incr_quickack and tcp_enter_quickack_mode

[ Upstream commit 9a9c9b51e54618861420093ae6e9b50a961914c5 ]

We want to add finer control of the number of ACK packets sent after
ECN events.

This patch is not changing current behavior, it only enables following
change.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tcp: do not force quickack when receiving out-of-order packets

[ Upstream commit a3893637e1eb0ef5eb1bbc52b3a8d2dfa317a35d ]

As explained in commit 9f9843a751d0 ("tcp: properly handle stretch
acks in slow start"), TCP stacks have to consider how many packets
are acknowledged in one single ACK, because of GRO, but also
because of ACK compression or losses.

We plan to add SACK compression in the following patch, we
must therefore not call tcp_enter_quickack_mode()

Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netlink: Don't shift with UB on nlk->ngroups

[ Upstream commit 61f4b23769f0cc72ae62c9a81cf08f0397d40da8 ]

On i386 nlk->ngroups might be 32 or 0. Which leads to UB, resulting in
hang during boot.
Check for 0 ngroups and use (unsigned long long) as a type to shift.

Fixes: 7acf9d4237c4 ("netlink: Do not subscribe to non-existent groups").
Reported-by: kernel test robot <rong.a.chen@intel.com>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netlink: Do not subscribe to non-existent groups

[ Upstream commit 7acf9d4237c46894e0fa0492dd96314a41742e84 ]

Make ABI more strict about subscribing to group > ngroups.
Code doesn't check for that and it looks bogus.
(one can subscribe to non-existing group)
Still, it's possible to bind() to all possible groups with (-1)

Cc: "David S. Miller" <davem@davemloft.net>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Cc: netdev@vger.kernel.org
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xen-netfront: wait xenbus state change when load module manually

[ Upstream commit 822fb18a82abaf4ee7058793d95d340f5dab7bfc ]

When loading module manually, after call xenbus_switch_state to initializes
the state of the netfront device, the driver state did not change so fast
that may lead no dev created in latest kernel. This patch adds wait to make
sure xenbus knows the driver is not in closed/unknown state.

Current state:
[vm]# ethtool eth0
Settings for eth0:
Link detected: yes
[vm]# modprobe -r xen_netfront
[vm]# modprobe  xen_netfront
[vm]# ethtool eth0
Settings for eth0:
Cannot get device settings: No such device
Cannot get wake-on-lan settings: No such device
Cannot get message level: No such device
Cannot get link status: No such device
No data available

With the patch installed.
[vm]# ethtool eth0
Settings for eth0:
Link detected: yes
[vm]# modprobe -r xen_netfront
[vm]# modprobe xen_netfront
[vm]# ethtool eth0
Settings for eth0:
Link detected: yes

Signed-off-by: Xiao Liang <xiliang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tcp_bbr: fix bw probing to raise in-flight data for very small BDPs

[ Upstream commit 383d470936c05554219094a4d364d964cb324827 ]

For some very small BDPs (with just a few packets) there was a
quantization effect where the target number of packets in flight
during the super-unity-gain (1.25x) phase of gain cycling was
implicitly truncated to a number of packets no larger than the normal
unity-gain (1.0x) phase of gain cycling. This meant that in multi-flow
scenarios some flows could get stuck with a lower bandwidth, because
they did not push enough packets inflight to discover that there was
more bandwidth available. This was really only an issue in multi-flow
LAN scenarios, where RTTs and BDPs are low enough for this to be an
issue.

This fix ensures that gain cycling can raise inflight for small BDPs
by ensuring that in PROBE_BW mode target inflight values with a
super-unity gain are always greater than inflight values with a gain
<= 1. Importantly, this applies whether the inflight value is
calculated for use as a cwnd value, or as a target inflight value for
the end of the super-unity phase in bbr_is_next_cycle_phase() (both
need to be bigger to ensure we can probe with more packets in flight
reliably).

This is a candidate fix for stable releases.

Fixes: 0f8782ea1497 ("tcp_bbr: add BBR congestion control")
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Acked-by: Yuchung Cheng <ycheng@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Acked-by: Priyaranjan Jha <priyarjha@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

NET: stmmac: align DMA stuff to largest cache line length

[ Upstream commit 9939a46d90c6c76f4533d534dbadfa7b39dc6acc ]

As for today STMMAC_ALIGN macro (which is used to align DMA stuff)
relies on L1 line length (L1_CACHE_BYTES).
This isn't correct in case of system with several cache levels
which might have L1 cache line length smaller than L2 line. This
can lead to sharing one cache line between DMA buffer and other
data, so we can lose this data while invalidate DMA buffer before
DMA transaction.

Fix that by using SMP_CACHE_BYTES instead of L1_CACHE_BYTES for
aligning.

Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: mdio-mux: bcm-iproc: fix wrong getter and setter pair

[ Upstream commit b0753408aadf32c7ece9e6b765017881e54af833 ]

mdio_mux_iproc_probe() uses platform_set_drvdata() to store md pointer
in device, whereas mdio_mux_iproc_remove() restores md pointer by
dev_get_platdata(&pdev->dev). This leads to wrong resources release.

The patch replaces getter to platform_get_drvdata.

Fixes: 98bc865a1ec8 ("net: mdio-mux: Add MDIO mux driver for iProc SoCs")
Signed-off-by: Anton Vasilyev <vasilyev@ispras.ru>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: lan78xx: fix rx handling before first packet is send

[ Upstream commit 136f55f660192ce04af091642efc75d85e017364 ]

As long the bh tasklet isn't scheduled once, no packet from the rx path
will be handled. Since the tx path also schedule the same tasklet
this situation only persits until the first packet transmission.
So fix this issue by scheduling the tasklet after link reset.

Link: https://github.com/raspberrypi/linux/issues/2617
Fixes: 55d7de9de6c3 ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet")
Suggested-by: Floris Bos <bos@je-eigen-domein.nl>
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: fix amd-xgbe flow-control issue

[ Upstream commit 7f3fc7ddf719cd6faaf787722c511f6918ac6aab ]

If we enable or disable xgbe flow-control by ethtool ,
it does't work.Because the parameter is not properly
assigned,so we need to adjust the assignment order
of the parameters.

Fixes: c1ce2f77366b ("amd-xgbe: Fix flow control setting logic")
Signed-off-by: tangpengpeng <tangpengpeng@higon.com>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: ena: Fix use of uninitialized DMA address bits field

[ Upstream commit 101f0cd4f2216d32f1b8a75a2154cf3997484ee2 ]

UBSAN triggers the following undefined behaviour warnings:
[...]
[   13.236124] UBSAN: Undefined behaviour in drivers/net/ethernet/amazon/ena/ena_eth_com.c:468:22
[   13.240043] shift exponent 64 is too large for 64-bit type 'long long unsigned int'
[...]
[   13.744769] UBSAN: Undefined behaviour in drivers/net/ethernet/amazon/ena/ena_eth_com.c:373:4
[   13.748694] shift exponent 64 is too large for 64-bit type 'long long unsigned int'
[...]

When splitting the address to high and low, GENMASK_ULL is used to generate
a bitmask with dma_addr_bits field from io_sq (in ena_com_prepare_tx and
ena_com_add_single_rx_desc).
The problem is that dma_addr_bits is not initialized with a proper value
(besides being cleared in ena_com_create_io_queue).
Assign dma_addr_bits the correct value that is stored in ena_dev when
initializing the SQ.

Fixes: 1738cd3ed342 ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)")
Signed-off-by: Gal Pressman <pressmangal@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipv4: remove BUG_ON() from fib_compute_spec_dst

[ Upstream commit 9fc12023d6f51551d6ca9ed7e02ecc19d79caf17 ]

Remove BUG_ON() from fib_compute_spec_dst routine and check
in_dev pointer during flowi4 data structure initialization.
fib_compute_spec_dst routine can be run concurrently with device removal
where ip_ptr net_device pointer is set to NULL. This can happen
if userspace enables pkt info on UDP rx socket and the device
is removed while traffic is flowing

Fixes: 35ebf65e851c ("ipv4: Create and use fib_compute_spec_dst() helper")
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: dsa: qca8k: Allow overwriting CPU port setting

commit 9bb2289f90e671bdb78e306974187424ac19ff8e upstream.

Implement adjust_link function that allows to overwrite default CPU port
setting using fixed-link device tree subnode.

Signed-off-by: Michal Vokáč <michal.vokac@ysoft.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: dsa: qca8k: Add QCA8334 binding documentation

commit 218bbea11a777c156eb7bcbdc72867b32ae10985 upstream.

Add support for the four-port variant of the Qualcomm QCA833x switch.

The CPU port default link settings can be reconfigured using
a fixed-link sub-node.

Signed-off-by: Michal Vokáč <michal.vokac@ysoft.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: dsa: qca8k: Enable RXMAC when bringing up a port

commit eee1fe64765c562d8bcaf95e5631a8ea2f760f34 upstream.

When a port is brought up/down do not enable/disable only the TXMAC
but the RXMAC as well. This is essential for the CPU port to work.

Fixes: 6b93fb46480a ("net-next: dsa: add new driver for qca8xxx family")
Signed-off-by: Michal Vokáč <michal.vokac@ysoft.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: dsa: qca8k: Force CPU port to its highest bandwidth

commit 79a4ed4f0f93fc65e48a0fc5247ffa5645f7b0cc upstream.

By default autonegotiation is enabled to configure MAC on all ports.
For the CPU port autonegotiation can not be used so we need to set
some sensible defaults manually.

This patch forces the default setting of the CPU port to 1000Mbps/full
duplex which is the chip maximum capability.

Also correct size of the bit field used to configure link speed.

Fixes: 6b93fb46480a ("net-next: dsa: add new driver for qca8xxx family")
Signed-off-by: Michal Vokáč <michal.vokac@ysoft.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

RDMA/uverbs: Protect from attempts to create flows on unsupported QP

commit 940efcc8889f0d15567eb07fc9fd69b06e366aa5 upstream.

Flows can be created on UD and RAW_PACKET QP types. Attempts to provide
other QP types as an input causes to various unpredictable failures.

The reason is that in order to support all various types (e.g. XRC), we
are supposed to use real_qp handle and not qp handle and expect to
driver/FW to fail such (XRC) flows. The simpler and safer variant is to
ban all QP types except UD and RAW_PACKET, instead of relying on
driver/FW.

Cc: <stable@vger.kernel.org> # 3.11
Fixes: 436f2ad05a0b ("IB/core: Export ib_create/destroy_flow through uverbs")
Cc: syzkaller <syzkaller@googlegroups.com>
Reported-by: Noa Osherovich <noaos@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: gadget: udc: renesas_usb3: should remove debugfs

commit 1990cf7c21ea185cec98c6d45a82c04481261e35 upstream.

This patch fixes an issue that this driver doesn't remove its debugfs.

Fixes: 43ba968b00ea ("usb: gadget: udc: renesas_usb3: add debugfs to set the b-device mode")
Cc: <stable@vger.kernel.org> # v4.14+
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ovl: Sync upper dirty data when syncing overlayfs

commit e8d4bfe3a71537284a90561f77c85dea6c154369 upstream.

When executing filesystem sync or umount on overlayfs,
dirty data does not get synced as expected on upper filesystem.
This patch fixes sync filesystem method to keep data consistency
for overlayfs.

Signed-off-by: Chengguang Xu <cgxu@mykernel.net>
Fixes: e593b2bf513d ("ovl: properly implement sync_filesystem()")
Cc: <stable@vger.kernel.org> #4.11
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PCI: xgene: Remove leftover pci_scan_child_bus() call

commit 94b9d290b753cbbc87971ee134511245f5872a83 upstream.

The changes in commit 9af275be15f7 ("PCI: xgene: Convert PCI scan API to
pci_scan_root_bus_bridge()") converted the xgene PCI host driver to
the new pci_scan_root_bus_bridge() bus scanning API but erroneously left
the existing pci_scan_child_bus() call in place which resulted in duplicate
PCI bus enumerations.

Remove the leftover pci_scan_child_bus() call to properly complete the API
conversion.

Fixes: 9af275be15f7 ("PCI: xgene: Convert PCI scan API to pci_scan_root_bus_bridge()")
Tested-by: Khuong Dinh <kdinh@apm.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: <stable@vger.kernel.org> # 4.13+
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Tanmay Inamdar <tinamdar@apm.com>
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PCI: pciehp: Assume NoCompl+ for Thunderbolt ports

commit 493fb50e958c1c6deef7feff0b8c3855def78d75 upstream.

Certain Thunderbolt 1 controllers claim to support Command Completed events
(value of 0b in the No Command Completed Support field of the Slot
Capabilities register) but in reality they neither set the Command
Completed bit in the Slot Status register nor signal a Command Completed
interrupt:

  8086:1513  CV82524  [Light Ridge 4C  2010]
  8086:151a  DSL2310  [Eagle Ridge 2C  2011]
  8086:151b  CVL2510  [Light Peak 2C   2010]
  8086:1547  DSL3510  [Cactus Ridge 4C 2012]
  8086:1548  DSL3310  [Cactus Ridge 2C 2012]
  8086:1549  DSL2210  [Port Ridge 1C   2011]

All known newer chips (Redwood Ridge and onwards) set No Command Completed
Support, indicating that they do not support Command Completed events.

The user-visible impact is that after unplugging such a device, 2 seconds
elapse until pciehp is unbound.  That's because on ->remove,
pcie_write_cmd() is called via pcie_disable_notification() and every call
to pcie_write_cmd() takes 2 seconds (1 second for each invocation of
pcie_wait_cmd()):

  [  337.942727] pciehp 0000:0a:00.0:pcie204: Timeout on hotplug command 0x1038 (issued 21176 msec ago)
  [  340.014735] pciehp 0000:0a:00.0:pcie204: Timeout on hotplug command 0x0000 (issued 2072 msec ago)

That by itself has always been unpleasant, but the situation has become
worse with commit cc27b735ad3a ("PCI/portdrv: Turn off PCIe services during
shutdown"):  Now pciehp is unbound on ->shutdown.  Because Thunderbolt
controllers typically have 4 hotplug ports, every reboot and shutdown is
now delayed by 8 seconds, plus another 2 seconds for every attached
Thunderbolt 1 device.

Thunderbolt hotplug slots are not physical slots that one inserts cards
into, but rather logical hotplug slots implemented in silicon.  Devices
appear beyond those logical slots once a PCI tunnel is established on top
of the Thunderbolt Converged I/O switch.  One would expect commands written
to the Slot Control register to be executed immediately by the silicon, so
for simplicity we always assume NoCompl+ for Thunderbolt ports.

Fixes: cc27b735ad3a ("PCI/portdrv: Turn off PCIe services during shutdown")
Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: stable@vger.kernel.org # v4.12+
Cc: Sinan Kaya <okaya@codeaurora.org>
Cc: Yehezkel Bernat <yehezkel.bernat@intel.com>
Cc: Michael Jamet <michael.jamet@intel.com>
Cc: Andreas Noever <andreas.noever@gmail.com>
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: fix check to prevent initializing reserved inodes

commit 5012284700775a4e6e3fbe7eac4c543c4874b559 upstream.

Commit 8844618d8aa7: "ext4: only look at the bg_flags field if it is
valid" will complain if block group zero does not have the
EXT4_BG_INODE_ZEROED flag set.  Unfortunately, this is not correct,
since a freshly created file system has this flag cleared.  It gets
almost immediately after the file system is mounted read-write --- but
the following somewhat unlikely sequence will end up triggering a
false positive report of a corrupted file system:

   mkfs.ext4 /dev/vdc
   mount -o ro /dev/vdc /vdc
   mount -o remount,rw /dev/vdc

Instead, when initializing the inode table for block group zero, test
to make sure that itable_unused count is not too large, since that is
the case that will result in some or all of the reserved inodes
getting cleared.

This fixes the failures reported by Eric Whiteney when running
generic/230 and generic/231 in the the nojournal test case.

Fixes: 8844618d8aa7 ("ext4: only look at the bg_flags field if it is valid")
Reported-by: Eric Whitney <enwlinux@gmail.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: check for allocation block validity with block group locked

commit 8d5a803c6a6ce4ec258e31f76059ea5153ba46ef upstream.

With commit 044e6e3d74a3: "ext4: don't update checksum of new
initialized bitmaps" the buffer valid bit will get set without
actually setting up the checksum for the allocation bitmap, since the
checksum will get calculated once we actually allocate an inode or
block.

If we are doing this, then we need to (re-)check the verified bit
after we take the block group lock.  Otherwise, we could race with
another process reading and verifying the bitmap, which would then
complain about the checksum being invalid.

https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1780137

Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: fix inline data updates with checksums enabled

commit 362eca70b53389bddf3143fe20f53dcce2cfdf61 upstream.

The inline data code was updating the raw inode directly; this is
problematic since if metadata checksums are enabled,
ext4_mark_inode_dirty() must be called to update the inode's checksum.
In addition, the jbd2 layer requires that get_write_access() be called
before the metadata buffer is modified.  Fix both of these problems.

https://bugzilla.kernel.org/show_bug.cgi?id=200443

Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

squashfs: be more careful about metadata corruption

commit 01cfb7937a9af2abb1136c7e89fbf3fd92952956 upstream.

Anatoly Trosinenko reports that a corrupted squashfs image can cause a
kernel oops.  It turns out that squashfs can end up being confused about
negative fragment lengths.

The regular squashfs_read_data() does check for negative lengths, but
squashfs_read_metadata() did not, and the fragment size code just
blindly trusted the on-disk value.  Fix both the fragment parsing and
the metadata reading code.

Reported-by: Anatoly Trosinenko <anatoly.trosinenko@gmail.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Phillip Lougher <phillip@squashfs.org.uk>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

random: mix rdrand with entropy sent in from userspace

commit 81e69df38e2911b642ec121dec319fad2a4782f3 upstream.

Fedora has integrated the jitter entropy daemon to work around slow
boot problems, especially on VM's that don't support virtio-rng:

    https://bugzilla.redhat.com/show_bug.cgi?id=1572944

It's understandable why they did this, but the Jitter entropy daemon
works fundamentally on the principle: "the CPU microarchitecture is
**so** complicated and we can't figure it out, so it *must* be
random".  Yes, it uses statistical tests to "prove" it is secure, but
AES_ENCRYPT(NSA_KEY, COUNTER++) will also pass statistical tests with
flying colors.

So if RDRAND is available, mix it into entropy submitted from
userspace.  It can't hurt, and if you believe the NSA has backdoored
RDRAND, then they probably have enough details about the Intel
microarchitecture that they can reverse engineer how the Jitter
entropy daemon affects the microarchitecture, and attack its output
stream.  And if RDRAND is in fact an honest DRNG, it will immeasurably
improve on what the Jitter entropy daemon might produce.

This also provides some protection against someone who is able to read
or set the entropy seed file.

Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

block: reset bi_iter.bi_done after splitting bio

commit 5151842b9d8732d4cbfa8400b40bff894f501b2f upstream.

After the bio has been updated to represent the remaining sectors, reset
bi_done so bio_rewind_iter() does not rewind further than it should.

This resolves a bio_integrity_process() failure on reads where the
original request was split.

Fixes: 63573e359d05 ("bio-integrity: Restore original iterator on verify stage")
Signed-off-by: Greg Edwards <gedwards@ddn.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

blkdev: __blkdev_direct_IO_simple: fix leak in error case

commit 9362dd1109f87a9d0a798fbc890cb339c171ed35 upstream.

Fixes: 72ecad22d9f1 ("block: support a full bio worth of IO for simplified bdev direct-io")
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin Wilck <mwilck@suse.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

block: bio_iov_iter_get_pages: fix size of last iovec

commit b403ea2404889e1227812fa9657667a1deb9c694 upstream.

If the last page of the bio is not "full", the length of the last
vector slot needs to be corrected. This slot has the index
(bio->bi_vcnt - 1), but only in bio->bi_io_vec. In the "bv" helper
array, which is shifted by the value of bio->bi_vcnt at function
invocation, the correct index is (nr_pages - 1).

v2: improved readability following suggestions from Ming Lei.
v3: followed a formatting suggestion from Christoph Hellwig.

Fixes: 2cefe4dbaadf ("block: add bio_iov_iter_get_pages()")
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin Wilck <mwilck@suse.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/dp/mst: Fix off-by-one typo when dump payload table

[ Upstream commit 7056a2bccc3b5afc51f9b35b30a46f0d9219968d ]

It seems there is a classical off-by-one typo from the beginning
when commit

  ad7f8a1f9ced ("drm/helper: add Displayport multi-stream helper (v0.6)")

introduced a new helper.

Fix a typo by introducing a macro constant.

Cc: Dave Airlie <airlied@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180319141932.37290-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/atomic-helper: Drop plane->fb references only for drm_atomic_helper_shutdown()

[ Upstream commit 5e9cfeba6abb7e1a3f240bd24eb29178f0b83716 ]

drm_atomic_helper_shutdown() needs to release the reference held by
plane->fb. Since commit 49d70aeaeca8 ("drm/atomic-helper: Fix leak in
disable_all") we're doing that by calling drm_atomic_clean_old_fb() in
drm_atomic_helper_disable_all(). This also leaves plane->fb == NULL
afterwards. However, since drm_atomic_helper_disable_all() is also
used by the i915 gpu reset code
drm_atomic_helper_commit_duplicated_state() then has to undo the
damage and put the correct plane->fb pointers back in (and also
adjust the ref counts to match again as well).

That approach doesn't work so well for load detection as nothing
sets up the plane->old_fb pointers for us. This causes us to
leak an extra reference for each plane->fb when
drm_atomic_helper_commit_duplicated_state() calls
drm_atomic_clean_old_fb() after load detection.

To fix this let's call drm_atomic_clean_old_fb() only for
drm_atomic_helper_shutdown() as that's the only time we need to
actually drop the plane->fb references. In all the other cases
(load detection, gpu reset) we want to leave plane->fb alone.

v2: Don't inflict the clean_old_fbs bool to drivers (Daniel)
v3: Squash in the revert and rewrite the commit msg (Daniel)

Cc: martin.peres@free.fr
Cc: chris@chris-wilson.co.uk
Cc: Dave Airlie <airlied@gmail.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180322152313.6561-3-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> #pre-squash
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm: Add DP PSR2 sink enable bit

[ Upstream commit 4f212e40468650e220c1770876c7f25b8e0c1ff5 ]

To comply with eDP1.4a this bit should be set when enabling PSR2.

Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180328223046.16125-1-jose.souza@intel.com
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: topology: Add missing clock gating parameter when parsing hw_configs

[ Upstream commit 933e1c4a667103c4d10ebdc9505a0a6abd8c3fbd ]

Clock gating parameter is a part of `dai_fmt`. It is supported by
`alsa-lib` when creating a topology binary file, but ignored by kernel
when loading this topology file.

After applying this commit, the clock gating parameter is not ignored any
more. This solution is backwards compatible. The existing behaviour is
not broken, because by default the parameter value is 0 and is ignored.

snd_soc_tplg_hw_config.clock_gated = 0 => no effect
snd_soc_tplg_hw_config.clock_gated = 1 => SND_SOC_DAIFMT_GATED
snd_soc_tplg_hw_config.clock_gated = 2 => SND_SOC_DAIFMT_CONT

For example, the following config, based on
alsa-lib/src/conf/topology/broadwell/broadwell.conf, is now supported:

~~~~
SectionHWConfig."CodecHWConfig" {
        id "1"
        format "I2S"            # physical audio format.
        pm_gate_clocks "true"   # clock can be gated
}

SectionLink."Codec" {

        # used for binding to the physical link
        id "0"

        hw_configs [
                "CodecHWConfig"
        ]

        default_hw_conf_id "1"
}
~~~~

Signed-off-by: Kirill Marinushkin <k.marinushkin@gmail.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Mark Brown <broonie@kernel.org>
Cc: Pan Xiuli <xiuli.pan@linux.intel.com>
Cc: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Cc: linux-kernel@vger.kernel.org
Cc: alsa-devel@alsa-project.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: topology: Fix bclk and fsync inversion in set_link_hw_format()

[ Upstream commit a941e2fab3207cb0d57dc4ec47b1b12c8ea78b84 ]

The values of bclk and fsync are inverted WRT the codec. But the existing
solution already works for Broadwell, see the alsa-lib config:

`alsa-lib/src/conf/topology/broadwell/broadwell.conf`

This commit provides the backwards-compatible solution to fix this misuse.

Signed-off-by: Kirill Marinushkin <k.marinushkin@gmail.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Tested-by: Pan Xiuli <xiuli.pan@linux.intel.com>
Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Mark Brown <broonie@kernel.org>
Cc: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Cc: linux-kernel@vger.kernel.org
Cc: alsa-devel@alsa-project.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: si470x: fix __be16 annotations

[ Upstream commit 90db5c829692a0a7845e977e45719b4699216bd4 ]

The annotations there are wrong as warned:
   drivers/media/radio/si470x/radio-si470x-i2c.c:107:35: warning: cast to restricted __be16
   drivers/media/radio/si470x/radio-si470x-i2c.c:107:35: warning: cast to restricted __be16
   drivers/media/radio/si470x/radio-si470x-i2c.c:107:35: warning: cast to restricted __be16
   drivers/media/radio/si470x/radio-si470x-i2c.c:107:35: warning: cast to restricted __be16
   drivers/media/radio/si470x/radio-si470x-i2c.c:129:24: warning: incorrect type in assignment (different base types)
   drivers/media/radio/si470x/radio-si470x-i2c.c:129:24:    expected unsigned short [unsigned] [short] <noident>
   drivers/media/radio/si470x/radio-si470x-i2c.c:129:24:    got restricted __be16 [usertype] <noident>
   drivers/media/radio/si470x/radio-si470x-i2c.c:163:39: warning: cast to restricted __be16
   drivers/media/radio/si470x/radio-si470x-i2c.c:163:39: warning: cast to restricted __be16
   drivers/media/radio/si470x/radio-si470x-i2c.c:163:39: warning: cast to restricted __be16
   drivers/media/radio/si470x/radio-si470x-i2c.c:163:39: warning: cast to restricted __be16

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: atomisp: compat32: fix __user annotations

[ Upstream commit ad4222a0e29664666a71685a6e732923ca7c7e45 ]

The __user annotations at the compat32 code is not right:

   drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:81:18: warning: incorrect type in assignment (different address spaces)
   drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:81:18:    expected void *base
   drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:81:18:    got void [noderef] <asn:1>*
   drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:232:23: warning: incorrect type in assignment (different address spaces)
   drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:232:23:    expected unsigned int [usertype] *xcoords_y
   drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:232:23:    got void [noderef] <asn:1>*
   drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:233:23: warning: incorrect type in assignment (different address spaces)
   drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:233:23:    expected unsigned int [usertype] *ycoords_y
   drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:233:23:    got void [noderef] <asn:1>*
   drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:234:24: warning: incorrect type in assignment (different address spaces)
   drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:234:24:    expected unsigned int [usertype] *xcoords_uv
   drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:234:24:    got void [noderef] <asn:1>*
   drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:235:24: warning: incorrect type in assignment (different address spaces)
   drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:235:24:    expected unsigned int [usertype] *ycoords_uv
   drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:235:24:    got void [noderef] <asn:1>*
   drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:296:29: warning: incorrect type in assignment (different address spaces)
   drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:296:29:    expected unsigned int [usertype] *effective_width
   drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:296:29:    got void [noderef] <asn:1>*
   drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:360:29: warning: incorrect type in assignment (different address spaces)
   drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:360:29:    expected unsigned int [usertype] *effective_width
   drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:360:29:    got void [noderef] <asn:1>*
   drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:437:19: warning: incorrect type in assignment (different address spaces)
   drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:437:19:    expected struct v4l2_framebuffer *frame
   drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:437:19:    got void [noderef] <asn:1>*
   drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:481:29: warning: incorrect type in assignment (different address spaces)
   drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:481:29:    expected unsigned short *calb_grp_values
   drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:481:29:    got void [noderef] <asn:1>*
   drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:701:39: warning: cast removes address space of expression
   drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:704:21: warning: incorrect type in argument 1 (different address spaces)
   drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:704:21:    expected void const volatile [noderef] <asn:1>*<noident>
   drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:704:21:    got unsigned int [usertype] *src
   drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:737:43: warning: incorrect type in assignment (different address spaces)
   drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:737:43:    expected struct atomisp_shading_table *shading_table
   drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:737:43:    got void [noderef] <asn:1>*
   drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:742:44: warning: incorrect type in argument 1 (different address spaces)
   drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:742:44:    expected void [noderef] <asn:1>*to
   drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:742:44:    got struct atomisp_shading_table *shading_table
   drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:755:41: warning: incorrect type in assignment (different address spaces)
   drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:755:41:    expected struct atomisp_morph_table *morph_table
   drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:755:41:    got void [noderef] <asn:1>*
   drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:760:44: warning: incorrect type in argument 1 (different address spaces)
   drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:760:44:    expected void [noderef] <asn:1>*to
   drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:760:44:    got struct atomisp_morph_table *morph_table
   drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:772:40: warning: incorrect type in assignment (different address spaces)
   drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:772:40:    expected struct atomisp_dvs2_coefficients *dvs2_coefs
   drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:772:40:    got void [noderef] <asn:1>*
   drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:777:44: warning: incorrect type in argument 1 (different address spaces)
   drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:777:44:    expected void [noderef] <asn:1>*to
   drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:777:44:    got struct atomisp_dvs2_coefficients *dvs2_coefs
   drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:788:46: warning: incorrect type in assignment (different address spaces)
   drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:788:46:    expected struct atomisp_dvs_6axis_config *dvs_6axis_config
   drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:788:46:    got void [noderef] <asn:1>*
   drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:793:44: warning: incorrect type in argument 1 (different address spaces)
   drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:793:44:    expected void [noderef] <asn:1>*to
   drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:793:44:    got struct atomisp_dvs_6axis_config *dvs_6axis_config
   drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:853:17: warning: incorrect type in assignment (different address spaces)
   drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:853:17:    expected struct atomisp_sensor_ae_bracketing_lut_entry *lut
   drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:853:17:    got void [noderef] <asn:1>*

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: cxlflash: Avoid clobbering context control register value

[ Upstream commit 465891fe9237b02f8d0fd26448f733fae7236f4a ]

The SISLite specification originally defined the context control register with
a single field of bits to represent the LISN and also stipulated that the
register reset value be 0. The cxlflash driver took advantage of this when
programming the LISN for the master contexts via an unconditional write - no
other bits were preserved.

When unmap support was added, SISLite was updated to define bit 0 of the
context control register as a way for the AFU to notify the context owner that
unmap operations were supported. Thus the assumptions under which the register
is setup changed and the existing unconditional write is clobbering the unmap
state for master contexts. This is presently not an issue due to the order in
which the context control register is programmed in relation to the unmap bit
being queried but should be addressed to avoid a future regression in the
event this code is moved elsewhere.

To remedy this issue, preserve the bits when programming the LISN field in the
context control register. Since the LISN will now be programmed using a read
value, assert that the initial state of the LISN field is as described in
SISLite (0).

Signed-off-by: Matthew R. Ochs <mrochs@linux.vnet.ibm.com>
Signed-off-by: Uma Krishnan <ukrishn@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: cxlflash: Synchronize reset and remove ops

[ Upstream commit a3feb6ef50def7c91244d7bd15a3625b7b49b81f ]

The following Oops can be encountered if a device removal or system shutdown
is initiated while an EEH recovery is in process:

[c000000ff2f479c0] c008000015256f18 cxlflash_pci_slot_reset+0xa0/0x100
                                      [cxlflash]
[c000000ff2f47a30] c00800000dae22e0 cxl_pci_slot_reset+0x168/0x290 [cxl]
[c000000ff2f47ae0] c00000000003ef1c eeh_report_reset+0xec/0x170
[c000000ff2f47b20] c00000000003d0b8 eeh_pe_dev_traverse+0x98/0x170
[c000000ff2f47bb0] c00000000003f80c eeh_handle_normal_event+0x56c/0x580
[c000000ff2f47c60] c00000000003fba4 eeh_handle_event+0x2a4/0x338
[c000000ff2f47d10] c0000000000400b8 eeh_event_handler+0x1f8/0x200
[c000000ff2f47dc0] c00000000013da48 kthread+0x1a8/0x1b0
[c000000ff2f47e30] c00000000000b528 ret_from_kernel_thread+0x5c/0xb4

The remove handler frees AFU memory while the EEH recovery is in progress,
leading to a race condition. This can result in a crash if the recovery thread
tries to access this memory.

To resolve this issue, the cxlflash remove handler will evaluate the device
state and yield to any active reset or probing threads.

Signed-off-by: Uma Krishnan <ukrishn@linux.vnet.ibm.com>
Acked-by: Matthew R. Ochs <mrochs@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: megaraid_sas: Increase timeout by 1 sec for non-RAID fastpath IOs

[ Upstream commit 3239b8cd28fd849a2023483257d35d68c5876c74 ]

Hardware could time out Fastpath IOs one second earlier than the timeout
provided by the host.

For non-RAID devices, driver provides timeout value based on OS provided
timeout value. Under certain scenarios, if the OS provides a timeout
value of 1 second, due to above behavior hardware will timeout
immediately.

Increase timeout value for non-RAID fastpath IOs by 1 second.

Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: scsi_dh: replace too broad "TP9" string with the exact models

[ Upstream commit 37b37d2609cb0ac267280ef27350b962d16d272e ]

SGI/TP9100 is not an RDAC array:
    ^^^
https://git.opensvc.com/gitweb.cgi?p=multipath-tools/.git;a=blob;f=libmultipath/hwtable.c;h=88b4700beb1d8940008020fbe4c3cd97d62f4a56;hb=HEAD#l235

This partially reverts commit 35204772ea03 ("[SCSI] scsi_dh_rdac :
Consolidate rdac strings together")

[mkp: fixed up the new entries to align with rest of struct]

Cc: NetApp RDAC team <ng-eseries-upstream-maintainers@netapp.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: James E.J. Bottomley <jejb@linux.vnet.ibm.com>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: SCSI ML <linux-scsi@vger.kernel.org>
Cc: DM ML <dm-devel@redhat.com>
Signed-off-by: Xose Vazquez Perez <xose.vazquez@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

regulator: Don't return or expect -errno from of_map_mode()

[ Upstream commit 02f3703934a42417021405ef336fe45add13c3d1 ]

In of_get_regulation_constraints() we were taking the result of
of_map_mode() (an unsigned int) and assigning it to an int.  We were
then checking whether this value was -EINVAL.  Some implementers of
of_map_mode() were returning -EINVAL (even though the return type of
their function needed to be unsigned int) because they needed to
signal an error back to of_get_regulation_constraints().

In general in the regulator framework the mode is always referred to
as an unsigned int.  While we could fix this to be a signed int (the
highest value we store in there right now is 0x8), it's actually
pretty clean to just define the regulator mode 0x0 (the lack of any
bits set) as an invalid mode.  Let's do that.

Fixes: 5e5e3a42c653 ("regulator: of: Add support for parsing initial and suspend modes")
Suggested-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: omap3isp: fix unbalanced dma_iommu_mapping

[ Upstream commit b7e1e6859fbf60519fd82d7120cee106a6019512 ]

The OMAP3 ISP driver manages its MMU mappings through the IOMMU-aware
ARM DMA backend. The current code creates a dma_iommu_mapping and
attaches this to the ISP device, but never detaches the mapping in
either the probe failure paths or the driver remove path resulting
in an unbalanced mapping refcount and a memory leak. Fix this properly.

Reported-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Suman Anna <s-anna@ti.com>
Tested-by: Pavel Machek <pavel@ucw.cz>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

crypto: authenc - don't leak pointers to authenc keys

[ Upstream commit ad2fdcdf75d169e7a5aec6c7cb421c0bec8ec711 ]

In crypto_authenc_setkey we save pointers to the authenc keys in
a local variable of type struct crypto_authenc_keys and we don't
zeroize it after use. Fix this and don't leak pointers to the
authenc keys.

Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

crypto: authencesn - don't leak pointers to authenc keys

[ Upstream commit 31545df391d58a3bb60e29b1192644a6f2b5a8dd ]

In crypto_authenc_esn_setkey we save pointers to the authenc keys
in a local variable of type struct crypto_authenc_keys and we don't
zeroize it after use. Fix this and don't leak pointers to the
authenc keys.

Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: hub: Don't wait for connect state at resume for powered-off ports

[ Upstream commit 5d111f5190848d6fb1c414dc57797efea3526a2f ]

wait_for_connected() wait till a port change status to
USB_PORT_STAT_CONNECTION, but this is not possible if
the port is unpowered. The loop will only exit at timeout.

Such case take place if an over-current incident happen
while system is in S3. Then during resume wait_for_connected()
will wait 2s, which may be noticeable by the user.

Signed-off-by: Dominik Bozek <dominikx.bozek@intel.com>
Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

microblaze: Fix simpleImage format generation

[ Upstream commit ece97f3a5fb50cf5f98886fbc63c9665f2bb199d ]

simpleImage generation was broken for some time. This patch is fixing
steps how simpleImage.*.ub file is generated. Steps are objdump of
vmlinux and create .ub.
Also make sure that there is striped elf version with .strip suffix.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

soc: imx: gpcv2: Do not pass static memory as platform data

[ Upstream commit 050f810e238f268670f14a8f8b793ba2dbf2e92f ]

Platform device core assumes the ownership of dev.platform_data as
well as that it is dynamically allocated and it will try to kfree it
as a part of platform_device_release(). Change the code to use
platform_device_add_data() n instead of a pointer to a static memory
to avoid causing a BUG() when calling platform_device_put().

The problem can be reproduced by artificially enabling the error path
of platform_device_add() call (around line 357).

Note that this change also allows us to constify imx7_pgc_domains,
since we no longer need to be able to modify it.

Cc: Stefan Agner <stefan@agner.ch>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

serial: core: Make sure compiler barfs for 16-byte earlycon names

[ Upstream commit c1c734cb1f54b062f7e67ffc9656d82f5b412b9c ]

As part of bringup I ended up wanting to call an earlycon driver by a
name that was exactly 16-bytes big, specifically "qcom_geni_serial".

Unfortunately, when I tried this I found that things compiled just
fine.  They just didn't work.

Specifically the compiler felt perfectly justified in initting the
".name" field of "struct earlycon_id" with the full 16-bytes and just
skipping the '\0'.  Needless to say, that behavior didn't seem ideal,
but I guess someone must have allowed it for a reason.

One way to fix this is to shorten the name field to 15 bytes and then
add an extra byte after that nobody touches.  This should always be
initted to 0 and we're golden.

There are, of course, other ways to fix this too.  We could audit all
the users of the "name" field and make them stop at both null
termination or at 16 bytes.  We could also just make the name field
much bigger so that we're not likely to run into this.  ...but both
seem like we'll just hit the bug again.

Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: ldlm: free resource when ldlm_lock_create() fails.

[ Upstream commit d8caf662b4aeeb2ac83ac0b22e40db88e9360c77 ]

ldlm_lock_create() gets a resource, but don't put it on
all failure paths. It should.

Signed-off-by: NeilBrown <neilb@suse.com>
Reviewed-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: llite: correct removexattr detection

[ Upstream commit 1b60f6dfa38403ff7c4d0b4b7ecdb810f9789a2a ]

In ll_xattr_set_common() detect the removexattr() case correctly by
testing for a NULL value as well as XATTR_REPLACE.

Signed-off-by: John L. Hammond <john.hammond@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-10787
Reviewed-on: https://review.whamcloud.com/
Reviewed-by: Dmitry Eremin <dmitry.eremin@intel.com>
Reviewed-by: James Simmons <uja.ornl@yahoo.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vchiq_core: Fix missing semaphore release in error case

[ Upstream commit 8113b89fc615cfb531df0334fb3a091cf6a45ce0 ]

The bail out branch in case of a invalid tx_pos missed a semaphore
release. Dan Carpenter found this with a static checker.

Fixes: d1eab9dec610 ("staging: vchiq_core: Bail out in case of invalid tx_pos")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

audit: allow not equal op for audit by executable

[ Upstream commit 23bcc480dac204c7dbdf49d96b2c918ed98223c2 ]

Current implementation of auditing by executable name only implements
the 'equal' operator. This patch extends it to also support the 'not
equal' operator.

See: https://github.com/linux-audit/audit-kernel/issues/53

Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Reviewed-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rsi: fix nommu_map_sg overflow kernel panic

[ Upstream commit f700546682a62a87a9615121a37ee7452dab4b76 ]

Following overflow kernel panic is observed on some platforms while
loading the driver. It is fixed if dynamically allocated memory is
passed to SDIO instead of static one

[  927.513963] nommu_map_sg: overflow 17d54064ba7c+20 of device mask ffffffff
[  927.517712] Modules linked in: rsi_sdio(+) cmac bnep arc4 rsi_91x mac80211 cfg80211
       btrsi rfcomm bluetooth ecdh_generic snd_soc_sst_bytcr_rt5660
[  927.517861] CPU: 0 PID: 1624 Comm: insmod Tainted: G W 4.15.0-1000 #1
[  927.517870] RIP: 0010:sdhci_send_command+0x5f0/0xa90 [sdhci]
[  927.517873] RSP: 0000:ffffac3fc064b6d8 EFLAGS: 00010086
[  927.517895] Call Trace:
[  927.517908]  ? __schedule+0x3cd/0x890
[  927.517915]  ? mod_timer+0x17b/0x3c0
[  927.517922]  sdhci_request+0x7c/0xf0 [sdhci]
[  927.517928]  __mmc_start_request+0x5a/0x170
[  927.517932]  mmc_start_request+0x74/0x90
[  927.517936]  mmc_wait_for_req+0x87/0xe0
[  927.517940]  mmc_io_rw_extended+0x2fd/0x330
[  927.517946]  ? mmc_wait_data_done+0x30/0x30
[  927.517951]  sdio_io_rw_ext_helper+0x160/0x210
[  927.517956]  sdio_writesb+0x1d/0x20
[  927.517966] rsi_sdio_write_register_multiple+0x68/0x110 [rsi_sdio]
[  927.517976]  rsi_hal_device_init+0x357/0x910 [rsi_91x]
[  927.517983]  ? rsi_hal_device_init+0x357/0x910 [rsi_91x]
[  927.517990]  rsi_probe+0x2c6/0x450 [rsi_sdio]
[  927.517995]  sdio_bus_probe+0xfc/0x110
[  927.518000]  driver_probe_device+0x2b3/0x490
[  927.518005]  __driver_attach+0xdf/0xf0
[  927.518008]  ? driver_probe_device+0x490/0x490
[  927.518014]  bus_for_each_dev+0x6c/0xc0
[  927.518018]  driver_attach+0x1e/0x20
[  927.518021]  bus_add_driver+0x1f4/0x270
[  927.518028]  ? rsi_sdio_ack_intr+0x50/0x50 [rsi_sdio]
[  927.518031]  driver_register+0x60/0xe0
[  927.518038]  ? rsi_sdio_ack_intr+0x50/0x50 [rsi_sdio]
[  927.518041]  sdio_register_driver+0x20/0x30
[  927.518047]  rsi_module_init+0x16/0x40 [rsi_sdio]

Signed-off-by: Siva Rebbagondla <siva.rebbagondla@redpinesignals.com>
Signed-off-by: Amitkumar Karwar <amit.karwar@redpinesignals.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rsi: Fix 'invalid vdd' warning in mmc

[ Upstream commit 78e450719c702784e42af6da912d3692fd3da0cb ]

While performing cleanup, driver is messing with card->ocr
value by not masking rocr against ocr_avail. Below panic
is observed with some of the SDIO host controllers due to
this. Issue is resolved by reverting incorrect modifications
to vdd.

[  927.423821] mmc1: Invalid vdd 0x1f
[  927.423925] Modules linked in: rsi_sdio(+) cmac bnep arc4 rsi_91x
       mac80211 cfg80211 btrsi rfcomm bluetooth ecdh_generic
[  927.424073] CPU: 0 PID: 1624 Comm: insmod Tainted: G W        4.15.0-1000-caracalla #1
[  927.424075] Hardware name: Dell Inc. Edge Gateway 3003/      , BIOS 01.00.06 01/22/2018
[  927.424082] RIP: 0010:sdhci_set_power_noreg+0xdd/0x190[sdhci]
[  927.424085] RSP: 0018:ffffac3fc064b930 EFLAGS:  00010282
[  927.424107] Call Trace:
[  927.424118]  sdhci_set_power+0x5a/0x60 [sdhci]
[  927.424125]  sdhci_set_ios+0x360/0x3b0 [sdhci]
[  927.424133]  mmc_set_initial_state+0x92/0x120
[  927.424137]  mmc_power_up.part.34+0x33/0x1d0
[  927.424141]  mmc_power_up+0x17/0x20
[  927.424147]  mmc_sdio_runtime_resume+0x2d/0x50
[  927.424151]  mmc_runtime_resume+0x17/0x20
[  927.424156]  __rpm_callback+0xc4/0x200
[  927.424161]  ? idr_alloc_cyclic+0x57/0xd0
[  927.424165]  ? mmc_runtime_suspend+0x20/0x20
[  927.424169]  rpm_callback+0x24/0x80
[  927.424172]  ? mmc_runtime_suspend+0x20/0x20
[  927.424176]  rpm_resume+0x4b3/0x6c0
[  927.424181]  __pm_runtime_resume+0x4e/0x80
[  927.424188]  driver_probe_device+0x41/0x490
[  927.424192]  __driver_attach+0xdf/0xf0
[  927.424196]  ? driver_probe_device+0x490/0x490
[  927.424201]  bus_for_each_dev+0x6c/0xc0
[  927.424205]  driver_attach+0x1e/0x20
[  927.424209]  bus_add_driver+0x1f4/0x270
[  927.424217]  ? rsi_sdio_ack_intr+0x50/0x50 [rsi_sdio]
[  927.424221]  driver_register+0x60/0xe0
[  927.424227]  ? rsi_sdio_ack_intr+0x50/0x50 [rsi_sdio]
[  927.424231]  sdio_register_driver+0x20/0x30
[  927.424237]  rsi_module_init+0x16/0x40 [rsi_sdio]

Signed-off-by: Siva Rebbagondla <siva.rebbagondla@redpinesignals.com>
Signed-off-by: Amitkumar Karwar <amit.karwar@redpinesignals.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipconfig: Correctly initialise ic_nameservers

[ Upstream commit 300eec7c0a2495f771709c7642aa15f7cc148b83 ]

ic_nameservers, which stores the list of name servers discovered by
ipconfig, is initialised (i.e. has all of its elements set to NONE, or
0xffffffff) by ic_nameservers_predef() in the following scenarios:

 - before the "ip=" and "nfsaddrs=" kernel command line parameters are
   parsed (in ip_auto_config_setup());
 - before autoconfiguring via DHCP or BOOTP (in ic_bootp_init()), in
   order to clear any values that may have been set after parsing "ip="
   or "nfsaddrs=" and are no longer needed.

This means that ic_nameservers_predef() is not called when neither "ip="
nor "nfsaddrs=" is specified on the kernel command line. In this
scenario, every element in ic_nameservers remains set to 0x00000000,
which is indistinguishable from ANY and causes pnp_seq_show() to write
the following (bogus) information to /proc/net/pnp:

  #MANUAL
  nameserver 0.0.0.0
  nameserver 0.0.0.0
  nameserver 0.0.0.0

This is potentially problematic for systems that blindly link
/etc/resolv.conf to /proc/net/pnp.

Ensure that ic_nameservers is also initialised when neither "ip=" nor
"nfsaddrs=" are specified by calling ic_nameservers_predef() in
ip_auto_config(), but only when ip_auto_config_setup() was not called
earlier. This causes the following to be written to /proc/net/pnp, and
is consistent with what gets written when ipconfig is configured
manually but no name servers are specified on the kernel command line:

  #MANUAL

Signed-off-by: Chris Novakovic <chris@chrisn.me.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/gma500: fix psb_intel_lvds_mode_valid()'s return type

[ Upstream commit 2ea009095c6e7396915a1d0dd480c41f02985f79 ]

The method struct drm_connector_helper_funcs::mode_valid is defined
as returning an 'enum drm_mode_status' but the driver implementation
for this method, psb_intel_lvds_mode_valid(), uses an 'int' for it.

Fix this by using 'enum drm_mode_status' for psb_intel_lvds_mode_valid().

Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180424131458.2060-1-luc.vanoostenryck@gmail.com
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

igb: Fix queue selection on MAC filters on i210

[ Upstream commit 4dc93fcf0b95dc3fda4db917effae31fbb8ad2a8 ]

On the RAH registers there are semantic differences on the meaning of
the "queue" parameter for traffic steering depending on the controller
model: there is the 82575 meaning, which "queue" means a RX Hardware
Queue, and the i350 meaning, where it is a reception pool.

The previous behaviour was having no effect for i210 based controllers
because the QSEL bit of the RAH register wasn't being set.

This patch separates the condition in discrete cases, so the different
handling is clearer.

Fixes: 83c21335c876 ("igb: improve MAC filter handling")
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: defconfig: Enable Rockchip io-domain driver

[ Upstream commit 7c8b77f81552c2b0e5d9c560da70bc4149ce66a5 ]

Heiko Stübner justified pretty well the change in commit e330eb86ba0b
("ARM: multi_v7_defconfig: enable Rockchip io-domain driver"). This
change is also needed for arm64 rockchip boards, so, do the same for arm64.

The io-domain driver is necessary to notify the soc about voltages
changes happening on supplying regulators. Probably the most important
user right now is the mmc tuning code, where the soc needs to get
notified when the voltage is dropped to the 1.8V point.

As this option is necessary to successfully tune UHS cards etc, it
should get built in. Otherwise, tuning will fail with,

   dwmmc_rockchip fe320000.dwmmc: All phases bad!
   mmc0: tuning execution failed: -5

Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Acked-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nvme: lightnvm: add granby support

[ Upstream commit ea48e877994f086af481427bac110aa63686c3ce ]

Add a new lightnvm quirk to identify CNEX’s Granby controller.

Signed-off-by: Wei Xu <wxu@cnexlabs.com>
Reviewed-by: Javier González <javier@cnexlabs.com>
Reviewed-by: Matias Bjørling <mb@lightnvm.io>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

memory: tegra: Apply interrupts mask per SoC

[ Upstream commit 1c74d5c0de0c2cc29fef97a19251da2ad6f579bd ]

Currently we are enabling handling of interrupts specific to Tegra124+
which happen to overlap with previous generations. Let's specify
interrupts mask per SoC generation for consistency and in a preparation
of squashing of Tegra20 driver into the common one that will enable
handling of GART faults which may be undesirable by newer generations.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

memory: tegra: Do not handle spurious interrupts

[ Upstream commit bf3fbdfbec947cdd04b2f2c4bce11534c8786eee ]

The ISR reads interrupts-enable mask, but doesn't utilize it. Apply the
mask to the interrupt status and don't handle interrupts that MC driver
haven't asked for. Kernel would disable spurious MC IRQ and report the
error. This would happen only in a case of a very severe bug.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

delayacct: Use raw_spinlocks

[ Upstream commit 02acc80d19edb0d5684c997b2004ad19f9f5236e ]

try_to_wake_up() might invoke delayacct_blkio_end() while holding the
pi_lock (which is a raw_spinlock_t). delayacct_blkio_end() acquires
task_delay_info.lock which is a spinlock_t. This causes a might sleep splat
on -RT where non raw spinlocks are converted to 'sleeping' spinlocks.

task_delay_info.lock is only held for a short amount of time so it's not a
problem latency wise to make convert it to a raw spinlock.

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Balbir Singh <bsingharora@gmail.com>
Link: https://lkml.kernel.org/r/20180423161024.6710-1-bigeasy@linutronix.de
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

stop_machine: Use raw spinlocks

[ Upstream commit de5b55c1d4e30740009864eb35ce4ed856aac01d ]

Use raw-locks in stop_machine() to allow locking in irq-off and
preempt-disabled regions on -RT. This also documents the possible locking
context in general.

[bigeasy: update patch description.]
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://lkml.kernel.org/r/20180423191635.6014-1-bigeasy@linutronix.de
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

backlight: pwm_bl: Don't use GPIOF_* with gpiod_get_direction

[ Upstream commit bb084c0f61d659f0e6d371b096e0e57998f191d6 ]

The documentation was wrong, gpiod_get_direction() returns 0/1 instead
of the GPIOF_* flags. The docs were fixed with commit 94fc73094abe47
("gpio: correct docs about return value of gpiod_get_direction"). Now,
fix this user (until a better, system-wide solution is in place).

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: Daniel Thompson <daniel.thompson@linaro.org>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dt-bindings: net: meson-dwmac: new compatible name for AXG SoC

[ Upstream commit 7e5d05e18ba1ed491c6f836edee7f0b90f3167bc ]

We need to introduce a new compatible name for the Meson-AXG SoC
in order to support the RMII 100M ethernet PHY, since the PRG_ETH0
register of the dwmac glue layer is changed from previous old SoC.

Signed-off-by: Yixun Lan <yixun.lan@amlogic.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: hns3: Fixes the out of bounds access in hclge_map_tqp

[ Upstream commit 38e62046d4c95272e2fb001d2d72baf48fa090e9 ]

This patch fixes the handling of the check when number of vports
are detected to be more than available TPQs. Current handling causes
an out of bounds access in hclge_map_tqp().

Fixes: 7df7dad633e2 ("net: hns3: Refactor the mapping of tqp to vport")
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

spi: meson-spicc: Fix error handling in meson_spicc_probe()

[ Upstream commit ded5fa4e8bac25612caab8f0822691308a28a552 ]

If devm_spi_register_master() fails in meson_spicc_probe(),
spicc->core is left undisabled. The patch fixes that.

Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dt-bindings: pinctrl: meson: add support for the Meson8m2 SoC

[ Upstream commit 03d9fbc39730b3e6b2e7047dc85f0f70de8fb97d ]

The Meson8m2 SoC is a variant of Meson8 with some updates from Meson8b
(such as the Gigabit capable DesignWare MAC).
It is mostly pin compatible with Meson8, only 10 (existing) CBUS pins
get an additional function (four of these are Ethernet RXD2, RXD3, TXD2
and TXD3 which are required when the board uses an RGMII PHY).
The AOBUS pins seem to be identical on Meson8 and Meson8m2.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mmc: pwrseq: Use kmalloc_array instead of stack VLA

[ Upstream commit 486e6661367b40f927aadbed73237693396cbf94 ]

The use of stack Variable Length Arrays needs to be avoided, as they
can be a vector for stack exhaustion, which can be both a runtime bug
(kernel Oops) or a security flaw (overwriting memory beyond the
stack). Also, in general, as code evolves it is easy to lose track of
how big a VLA can get. Thus, we can end up having runtime failures
that are hard to debug. As part of the directive[1] to remove all VLAs
from the kernel, and build with -Wvla.

Currently driver is using a VLA declared using the number of descriptors.  This
array is used to store integer values and is later used as an argument to
`gpiod_set_array_value_cansleep()` This can be avoided by using
`kmalloc_array()` to allocate memory for the array of integer values.  Memory is
free'd before return from function.

>From the code it appears that it is safe to sleep so we can use GFP_KERNEL
(based _cansleep() suffix of function `gpiod_set_array_value_cansleep()`.

It can be expected that this patch will result in a small increase in overhead
due to the use of `kmalloc_array()`

[1] https://lkml.org/lkml/2018/3/7/621

Signed-off-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mmc: dw_mmc: update actual clock for mmc debugfs

[ Upstream commit ff178981bd5fd1667f373098740cb1c6d6efa1ba ]

Respect the actual clock for mmc debugfs to help better debug
the hardware.

mmc_host mmc0: Bus speed (slot 0) = 135475200Hz (slot req 150000000Hz,
actual 135475200HZ div = 0)

cat /sys/kernel/debug/mmc0/ios
clock:          150000000 Hz
actual clock:   135475200 Hz
vdd:            21 (3.3 ~ 3.4 V)
bus mode:       2 (push-pull)
chip select:    0 (don't care)
power mode:     2 (on)
bus width:      3 (8 bits)
timing spec:    9 (mmc HS200)
signal voltage: 0 (1.80 V)
driver type:    0 (driver type B)

Cc: Xiao Yao <xiaoyao@rock-chips.com>
Cc: Ziyuan <xzy.xu@rock-chips.com>
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/ca0132: fix build failure when a local macro is defined

[ Upstream commit 8e142e9e628975b0dddd05cf1b095331dff6e2de ]

DECLARE_TLV_DB_SCALE (alias of SNDRV_CTL_TLVD_DECLARE_DB_SCALE) is used but
tlv.h is not included. This causes build failure when local macro is
defined by comment-out.

This commit fixes the bug. At the same time, the alias macro is replaced
with a destination macro added at a commit 46e860f76804 ("ALSA: rename
TLV-related macros so that they're friendly to user applications")

Reported-by: Connor McAdams <conmanx360@gmail.com>
Fixes: 44f0c9782cc6 ('ALSA: hda/ca0132: Add tuning controls')
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/atomic: Handling the case when setting old crtc for plane

[ Upstream commit fc2a69f3903dfd97cd47f593e642b47918c949df ]

In the func drm_atomic_set_crtc_for_plane, with the current code,
if crtc of the plane_state and crtc passed as argument to the func
are same, entire func will executed in vein.
It will get state of crtc and clear and set the bits in plane_mask.
All these steps are not required for same old crtc.
Ideally, we should do nothing in this case, this patch handles the same,
and causes the program to return without doing anything in such scenario.

Signed-off-by: Satendra Singh Thakur <satendra.t@samsung.com>
Cc: Madhur Verma <madhur.verma@samsung.com>
Cc: Hemanshu Srivastava <hemanshu.s@samsung.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1525326572-25854-1-git-send-email-satendra.t@samsung.com
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: siano: get rid of __le32/__le16 cast warnings

[ Upstream commit e1b7f11b37def5f3021c06e8c2b4953e099357aa ]

Those are all false-positives that appear with smatch when building for
arm:

  drivers/media/common/siano/smsendian.c:38:36: warning: cast to restricted __le32
  drivers/media/common/siano/smsendian.c:38:36: warning: cast to restricted __le32
  drivers/media/common/siano/smsendian.c:38:36: warning: cast to restricted __le32
  drivers/media/common/siano/smsendian.c:38:36: warning: cast to restricted __le32
  drivers/media/common/siano/smsendian.c:38:36: warning: cast to restricted __le32
  drivers/media/common/siano/smsendian.c:38:36: warning: cast to restricted __le32
  drivers/media/common/siano/smsendian.c:47:44: warning: cast to restricted __le32
  drivers/media/common/siano/smsendian.c:47:44: warning: cast to restricted __le32
  drivers/media/common/siano/smsendian.c:47:44: warning: cast to restricted __le32
  drivers/media/common/siano/smsendian.c:47:44: warning: cast to restricted __le32
  drivers/media/common/siano/smsendian.c:47:44: warning: cast to restricted __le32
  drivers/media/common/siano/smsendian.c:47:44: warning: cast to restricted __le32
  drivers/media/common/siano/smsendian.c:67:35: warning: cast to restricted __le16
  drivers/media/common/siano/smsendian.c:67:35: warning: cast to restricted __le16
  drivers/media/common/siano/smsendian.c:67:35: warning: cast to restricted __le16
  drivers/media/common/siano/smsendian.c:67:35: warning: cast to restricted __le16
  drivers/media/common/siano/smsendian.c:84:44: warning: cast to restricted __le32
  drivers/media/common/siano/smsendian.c:84:44: warning: cast to restricted __le32
  drivers/media/common/siano/smsendian.c:84:44: warning: cast to restricted __le32
  drivers/media/common/siano/smsendian.c:84:44: warning: cast to restricted __le32
  drivers/media/common/siano/smsendian.c:84:44: warning: cast to restricted __le32
  drivers/media/common/siano/smsendian.c:84:44: warning: cast to restricted __le32
  drivers/media/common/siano/smsendian.c:98:26: warning: cast to restricted __le16
  drivers/media/common/siano/smsendian.c:98:26: warning: cast to restricted __le16
  drivers/media/common/siano/smsendian.c:98:26: warning: cast to restricted __le16
  drivers/media/common/siano/smsendian.c:98:26: warning: cast to restricted __le16
  drivers/media/common/siano/smsendian.c:99:28: warning: cast to restricted __le16
  drivers/media/common/siano/smsendian.c:99:28: warning: cast to restricted __le16
  drivers/media/common/siano/smsendian.c:99:28: warning: cast to restricted __le16
  drivers/media/common/siano/smsendian.c:99:28: warning: cast to restricted __le16
  drivers/media/common/siano/smsendian.c:100:27: warning: cast to restricted __le16
  drivers/media/common/siano/smsendian.c:100:27: warning: cast to restricted __le16
  drivers/media/common/siano/smsendian.c:100:27: warning: cast to restricted __le16
  drivers/media/common/siano/smsendian.c:100:27: warning: cast to restricted __le16

Get rid of them by adding explicit forced casts.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

f2fs: avoid fsync() failure caused by EAGAIN in writepage()

[ Upstream commit 5b19d284f5195a925dd015a6397bfce184097378 ]

pageout() in MM traslates EAGAIN, so calls handle_write_error()
 -> mapping_set_error() -> set_bit(AS_EIO, ...).
 file_write_and_wait_range() will see EIO error, which is critical
 to return value of fsync() followed by atomic_write failure to user.

Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bpf: fix references to free_bpf_prog_info() in comments

[ Upstream commit ab7f5bf0928be2f148d000a6eaa6c0a36e74750e ]

Comments in the verifier refer to free_bpf_prog_info() which
seems to have never existed in tree.  Replace it with
free_used_maps().

Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

thermal: exynos: fix setting rising_threshold for Exynos5433

[ Upstream commit 8bfc218d0ebbabcba8ed2b8ec1831e0cf1f71629 ]

Add missing clearing of the previous value when setting rising
temperature threshold.

Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: o2iblnd: Fix FastReg map/unmap for MLX5

[ Upstream commit 24d4b7c8de007cff9c7d83c06ae76099fdcce008 ]

The FastReg support in ko2iblnd was not unmapping pool items
causing the items to leak.  In addition, the mapping code
is not growing the pool like we do with FMR.

This patch makes sure we are unmapping FastReg pool elements
when we are done with them.  It also makes sure the pool
will grow when we depleat the pool.

Signed-off-by: Doug Oucharek <doug.s.oucharek@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-9472
Reviewed-on: https://review.whamcloud.com/27015
Reviewed-by: Andrew Perepechko <andrew.perepechko@seagate.com>
Reviewed-by: Dmitry Eremin <dmitry.eremin@intel.com>
Reviewed-by: James Simmons <uja.ornl@yahoo.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Doug Oucharek <dougso@me.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: o2iblnd: fix race at kiblnd_connect_peer

[ Upstream commit cf04968efe341b9b1c30a527e5dd61b2af9c43d2 ]

cmid will be destroyed at OFED if kiblnd_cm_callback return error.
if error happen before the end of kiblnd_connect_peer, it will touch
destroyed cmid and fail as
(o2iblnd_cb.c:1315:kiblnd_connect_peer())
            ASSERTION( cmid->device != ((void *)0) ) failed:

Signed-off-by: Alexander Boyko <alexander.boyko@seagate.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-10015
Reviewed-by: Alexey Lyashkov <c17817@cray.com>
Reviewed-by: Doug Oucharek <dougso@me.com>
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Signed-off-by: Doug Oucharek <dougso@me.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: qedf: Set the UNLOADING flag when removing a vport

[ Upstream commit 4f4616ceebaf045c59e8a6aa01f08826d18d5c63 ]

Similar to what we do when we remove a PCI function, set the
QEDF_UNLOADING flag to prevent any requests from being queued while a
vport is being deleted.  This prevents any requests from getting stuck
in limbo when the vport is unloaded or deleted.

Fixes the crash:

PID: 106676  TASK: ffff9a436aa90000  CPU: 12  COMMAND: "multipathd"
 #0 [ffff9a43567d3550] machine_kexec+522 at ffffffffaca60b2a
 #1 [ffff9a43567d35b0] __crash_kexec+114 at ffffffffacb13512
 #2 [ffff9a43567d3680] crash_kexec+48 at ffffffffacb13600
 #3 [ffff9a43567d3698] oops_end+168 at ffffffffad117768
 #4 [ffff9a43567d36c0] no_context+645 at ffffffffad106f52
 #5 [ffff9a43567d3710] __bad_area_nosemaphore+116 at ffffffffad106fe9
 #6 [ffff9a43567d3760] bad_area+70 at ffffffffad107379
 #7 [ffff9a43567d3788] __do_page_fault+1247 at ffffffffad11a8cf
 #8 [ffff9a43567d37f0] do_page_fault+53 at ffffffffad11a915
 #9 [ffff9a43567d3820] page_fault+40 at ffffffffad116768
    [exception RIP: qedf_init_task+61]
    RIP: ffffffffc0e13c2d  RSP: ffff9a43567d38d0  RFLAGS: 00010046
    RAX: 0000000000000000  RBX: ffffbe920472c738  RCX: ffff9a434fa0e3e8
    RDX: ffff9a434f695280  RSI: ffffbe920472c738  RDI: ffff9a43aa359c80
    RBP: ffff9a43567d3950   R8: 0000000000000c15   R9: ffff9a3fb09b9880
    R10: ffff9a434fa0e3e8  R11: ffff9a43567d35ce  R12: 0000000000000000
    R13: ffff9a434f695280  R14: ffff9a43aa359c80  R15: ffff9a3fb9e005c0
    ORIG_RAX: ffffffffffffffff  CS: 0010  SS: 0018

Signed-off-by: Chad Dupuis <chad.dupuis@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: hisi_sas: config ATA de-reset as an constrained command for v3 hw

[ Upstream commit 9413532788df7470297dd0475995c5dc5b07f362 ]

As a unconstrained command, a command can be sent to SATA disk even if
SATA disk status is BUSY, ERR or DRQ.

If an ATA reset assert is successful but ATA reset de-assert fails, then
it will retry the reset de-assert. If reset de- assert retry is
successful, we think it is okay to probe the device but actually it
still has Err status.

Apparently we need to retry the ATA reset assertion and de- assertion
instead for this mentioned scenario.

As such, we config ATA reset assert as a constrained command, if ATA
reset de-assert fails, then ATA reset de-assert retry will also
fail. Then we will retry the proper process of ATA reset assert and
de-assert again.

Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: megaraid: silence a static checker bug

[ Upstream commit 27e833dabab74ee665e487e291c9afc6d71effba ]

If we had more than 32 megaraid cards then it would cause memory
corruption.  That's not likely, of course, but it's handy to enforce it
and make the static checker happy.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: 3w-xxxx: fix a missing-check bug

[ Upstream commit 9899e4d3523faaef17c67141aa80ff2088f17871 ]

In tw_chrdev_ioctl(), the length of the data buffer is firstly copied
from the userspace pointer 'argp' and saved to the kernel object
'data_buffer_length'. Then a security check is performed on it to make
sure that the length is not more than 'TW_MAX_IOCTL_SECTORS *
512'. Otherwise, an error code -EINVAL is returned. If the security
check is passed, the entire ioctl command is copied again from the
'argp' pointer and saved to the kernel object 'tw_ioctl'. Then, various
operations are performed on 'tw_ioctl' according to the 'cmd'. Given
that the 'argp' pointer resides in userspace, a malicious userspace
process can race to change the buffer length between the two
copies. This way, the user can bypass the security check and inject
invalid data buffer length. This can cause potential security issues in
the following execution.

This patch checks for capable(CAP_SYS_ADMIN) in tw_chrdev_open() to
avoid the above issues.

Signed-off-by: Wenwen Wang <wang6495@umn.edu>
Acked-by: Adam Radford <aradford@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: 3w-9xxx: fix a missing-check bug

[ Upstream commit c9318a3e0218bc9dacc25be46b9eec363259536f ]

In twa_chrdev_ioctl(), the ioctl driver command is firstly copied from
the userspace pointer 'argp' and saved to the kernel object
'driver_command'.  Then a security check is performed on the data buffer
size indicated by 'driver_command', which is
'driver_command.buffer_length'. If the security check is passed, the
entire ioctl command is copied again from the 'argp' pointer and saved
to the kernel object 'tw_ioctl'. Then, various operations are performed
on 'tw_ioctl' according to the 'cmd'. Given that the 'argp' pointer
resides in userspace, a malicious userspace process can race to change
the buffer size between the two copies. This way, the user can bypass
the security check and inject invalid data buffer size. This can cause
potential security issues in the following execution.

This patch checks for capable(CAP_SYS_ADMIN) in twa_chrdev_open()t o
avoid the above issues.

Signed-off-by: Wenwen Wang <wang6495@umn.edu>
Acked-by: Adam Radford <aradford@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bnxt_en: Check unsupported speeds in bnxt_update_link() on PF only.

[ Upstream commit dac0490718bd17df5e3995ffca14255e5f9ed22d ]

Only non-NPAR PFs need to actively check and manage unsupported link
speeds.  NPAR functions and VFs do not control the link speed and
should skip the unsupported speed detection logic, to avoid warning
messages from firmware rejecting the unsupported firmware calls.

Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf: fix invalid bit in diagnostic entry

[ Upstream commit 3c0a83b14ea71fef5ccc93a3bd2de5f892be3194 ]

The s390 CPU measurement facility sampling mode supports basic entries
and diagnostic entries. Each entry has a valid bit to indicate the
status of the entry as valid or invalid.

This bit is bit 31 in the diagnostic entry, but the bit mask definition
refers to bit 30.

Fix this by making the reserved field one bit larger.

Fixes: 7e75fc3ff4cf ("s390/cpum_sf: Add raw data sampling to support the diagnostic-sampling function")
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

s390/cpum_sf: Add data entry sizes to sampling trailer entry

[ Upstream commit 77715b7ddb446bd39a06f3376e85f4bb95b29bb8 ]

The CPU Measurement sampling facility creates a trailer entry for each
Sample-Data-Block of stored samples. The trailer entry contains the sizes
(in bytes) of the stored sampling types:
 - basic-sampling data entry size
 - diagnostic-sampling data entry size
Both sizes are 2 bytes long.

This patch changes the trailer entry definition to reflect this.

Fixes: fcc77f507333 ("s390/cpum_sf: Atomically reset trailer entry fields of sample-data-blocks")
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

brcmfmac: Add support for bcm43364 wireless chipset

[ Upstream commit 9c4a121e82634aa000a702c98cd6f05b27d6e186 ]

Add support for the BCM43364 chipset via an SDIO interface, as used in
e.g. the Murata 1FX module.

The BCM43364 uses the same firmware as the BCM43430 (which is already
included), the only difference is the omission of Bluetooth.

However, the SDIO_ID for the BCM43364 is 02D0:A9A4, giving it a MODALIAS
of sdio:c00v02D0dA9A4, which doesn't get recognised and hence doesn't
load the brcmfmac module. Adding the 'A9A4' ID in the appropriate place
triggers the brcmfmac driver to load, and then correctly use the
firmware file 'brcmfmac43430-sdio.bin'.

Signed-off-by: Sean Lanigan <sean@lano.id.au>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mtd: rawnand: fsl_ifc: fix FSL NAND driver to read all ONFI parameter pages

[ Upstream commit a75bbe71a27875fdc61cde1af6d799037cef6bed ]

Per ONFI specification (Rev. 4.0), if the CRC of the first parameter page
read is not valid, the host should read redundant parameter page copies.
Fix FSL NAND driver to read the two redundant copies which are mandatory
in the specification.

Signed-off-by: Jane Wan <Jane.Wan@nokia.com>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: saa7164: Fix driver name in debug output

[ Upstream commit 0cc4655cb57af0b7e105d075c4f83f8046efafe7 ]

This issue was reported by a user who downloaded a corrupt saa7164
firmware, then went looking for a valid xc5000 firmware to fix the
error displayed...but the device in question has no xc5000, thus after
much effort, the wild goose chase eventually led to a support call.

The xc5000 has nothing to do with saa7164 (as far as I can tell),
so replace the string with saa7164 as well as give a meaningful
hint on the firmware mismatch.

Signed-off-by: Brad Love <brad@nextdimension.cc>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: media-device: fix ioctl function types

[ Upstream commit daa36370b62428cca6d48d1b2530a8419f631c8c ]

This change fixes function types for media device ioctls to avoid
indirect call mismatches with Control-Flow Integrity checking.

Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ACPI / LPSS: Only call pwm_add_table() for Bay Trail PWM if PMIC HRV is 2

[ Upstream commit c975e472ec12392a0c34de1350e634310f8a1dea ]

The Point of View mobii wintab p800w Bay Trail tablet comes with a Crystal
Cove PMIC, yet uses the LPSS PWM for backlight control, rather then the
Crystal Cove's PWM, so we need to call pwm_add_table() to add a
pwm_backlight mapping for the LPSS pwm despite there being an INT33FD
ACPI device present.

On all Bay Trail devices the _HRV object of the INT33FD ACPI device
will normally return 2, to indicate the Bay Trail variant of the CRC
PMIC is present, except on this tablet where _HRV is 0xffff. I guess this
is a hack to make the windows Crystal Cove PWM driver not bind.

Out of the 44 DSTDs with an INT33FD device in there which I have (from
different model devices) only the pov mobii wintab p800w uses 0xffff for
the HRV.

The byt_pwm_setup code calls acpi_dev_present to check for the presence
of a INT33FD ACPI device which indicates that a CRC PMIC is present and
if the INT33FD ACPI device is present then byt_pwm_setup will not add
a pwm_backlight mapping for the LPSS pwm, so that the CRC PWM will get
used instead.

acpi_dev_present has a hrv parameter, this commit make us pass 2 instead
of -1, so that things still match on normal tablets, but on this special
case with its _HRV of 0xffff, the check will now fail so that the
pwm_backlight mapping for the LPSS pwm gets added fixing backlight
brightness control on this device.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

libata: Fix command retry decision

[ Upstream commit 804689ad2d9b66d0d3920b48cf05881049d44589 ]

For failed commands with valid sense data (e.g. NCQ commands),
scsi_check_sense() is used in ata_analyze_tf() to determine if the
command can be retried. In such case, rely on this decision and ignore
the command error mask based decision done in ata_worth_retry().

This fixes useless retries of commands such as unaligned writes on zoned
disks (TYPE_ZAC).

Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: rcar_jpu: Add missing clk_disable_unprepare() on error in jpu_open()

[ Upstream commit 43d0d3c52787df0221d1c52494daabd824fe84f1 ]

Add the missing clk_disable_unprepare() before return from
jpu_open() in the software reset error handling case.

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Acked-by: Mikhail Ulyanov <mikhail.ulyanov@cogentembedded.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hansverk@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: phy: phylink: Release link GPIO

[ Upstream commit daab3349ad1a69663ccad278ed71d55974d104b4 ]

We are not releasing the link GPIO descriptor with gpiod_put() which results in
subsequent probing to get -EBUSY when calling fwnode_get_named_gpiod(). Fix this
by doing the release in phylink_destroy().

Fixes: 9525ae83959b ("phylink: add phylink infrastructure")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dma-iommu: Fix compilation when !CONFIG_IOMMU_DMA

[ Upstream commit 8a22a3e1e768c309b718f99bd86f9f25a453e0dc ]

Inclusion of include/dma-iommu.h when CONFIG_IOMMU_DMA is not selected
results in the following splat:

In file included from drivers/irqchip/irq-gic-v3-mbi.c:20:0:
./include/linux/dma-iommu.h:95:69: error: unknown type name ‘dma_addr_t’
 static inline int iommu_get_msi_cookie(struct iommu_domain *domain, dma_addr_t base)
                                                                     ^~~~~~~~~~
./include/linux/dma-iommu.h:108:74: warning: ‘struct list_head’ declared inside parameter list will not be visible outside of this definition or declaration
 static inline void iommu_dma_get_resv_regions(struct device *dev, struct list_head *list)
                                                                          ^~~~~~~~~
scripts/Makefile.build:312: recipe for target 'drivers/irqchip/irq-gic-v3-mbi.o' failed

Fix it by including linux/types.h.

Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Rob Herring <robh@kernel.org>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lkml.kernel.org/r/20180508121438.11301-5-marc.zyngier@arm.com
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>