[SPARC64]: Implement futex_atomic_cmpxchg_inatomic().

Signed-off-by: David S. Miller <davem@davemloft.net>

Merge /pub/scm/linux/kernel/git/davem/sparc-2.6

* master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6:
  [SPARC64]: Fix off-by-1 error in TSB grow check.

Merge /pub/scm/linux/kernel/git/davem/net-2.6

* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6:
  [NET]: drop duplicate assignment in request_sock
  [IPSEC]: Fix tunnel error handling in ipcomp6

Merge branch 'for-linus' of git://brick.kernel.dk/data/git/linux-2.6-block

* 'for-linus' of git://brick.kernel.dk/data/git/linux-2.6-block:
  [PATCH] Don't make debugfs depend on DEBUG_KERNEL
  [PATCH] Fix blktrace compile with sysfs not defined
  [PATCH] unused label in drivers/block/cciss.
  [BLOCK] increase size of disk stat counters
  [PATCH] blk_execute_rq_nowait-speedup
  [PATCH] ide-cd: quiet down GPCMD_READ_CDVD_CAPACITY failure
  [BLOCK] ll_rw_blk: kmalloc -> kzalloc conversion
  [PATCH] kzalloc() conversion in drivers/block
  [PATCH] update max_sectors documentation

[PATCH] md: Convert reconfig_sem to reconfig_mutex

... being careful that mutex_trylock is inverted wrt down_trylock

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] sem2mutex: drivers/md

Semaphore to mutex conversion.

The conversion was generated via scripts, and the result was validated
automatically via a script as well.

Signed-off-by: Arjan van de Ven <arjan@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cc: Neil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] md: Restore 'remaining' count when retrying an write operation

When retrying a write due to barrier failure, we don't reset 'remaining', so
it goes negative and never hits 0 again.

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] md: Fix md grow/size code to correctly find the maximum available space

An md array can be asked to change the amount of each device that it is using,
and in particular can be asked to use the maximum available space.  This
currently only works if the first device is not larger than the rest.  As
'size' gets changed and so 'fit' becomes wrong.  So check if a 'fit' is
required early and don't corrupt it.

Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] md: Remove bi_end_io call out from under a spinlock

raid5 overloads bi_phys_segments to count the number of blocks that the
request was broken in to so that it knows when the bio is completely handled.

Accessing this must always be done under a spinlock.  In one case we also call
bi_end_io under that spinlock, which probably isn't ideal as bi_end_io could
be expensive (even though it isn't allowed to sleep).

So we reducde the range of the spinlock to just accessing bi_phys_segments.

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] md: Remove some stray semi-colons after functions called in macro..

wait_event_lock_irq puts a ';' after its usage of the 4th arg, so we don't
need to.

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] md: Improve comments about locking situation in raid5 make_request

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] md: Support suspending of IO to regions of an md array

This allows user-space to access data safely.  This is needed for raid5
reshape as user-space needs to take a backup of the first few stripes before
allowing reshape to commence.

It will also be useful in cluster-aware raid1 configurations so that all
cluster members can leave a section of the array untouched while a
resync/recovery happens.

A 'start' and 'end' of the suspended range are written to 2 sysfs attributes.
Note that only one range can be suspended at a time.

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] md: Make 'reshape' a possible sync_action action

This allows reshape to be triggerred via sysfs (which is the only way to start
it happening).

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] md: Split reshape handler in check_reshape and start_reshape

check_reshape checks validity and does things that can be done instantly -
like adding devices to raid1.  start_reshape initiates a restriping process to
convert the whole array.

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] md: Only checkpoint expansion progress occasionally

Instead of checkpointing at each stripe, only checkpoint when a new write
would overwrite uncheckpointed data.  Block any write to the uncheckpointed
area.  Arbitrarily checkpoint at least every 3Meg.

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] md: Checkpoint and allow restart of raid5 reshape

We allow the superblock to record an 'old' and a 'new' geometry, and a
position where any conversion is up to.  The geometry allows for changing
chunksize, layout and level as well as number of devices.

When using verion-0.90 superblock, we convert the version to 0.91 while the
conversion is happening so that an old kernel will refuse the assemble the
array.  For version-1, we use a feature bit for the same effect.

When starting an array we check for an incomplete reshape and restart the
reshape process if needed.  If the reshape stopped at an awkward time (like
when updating the first stripe) we refuse to assemble the array, and let
user-space worry about it.

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] md: Final stages of raid5 expand code

This patch adds raid5_reshape and end_reshape which will start and finish the
reshape processes.

raid5_reshape is only enabled in CONFIG_MD_RAID5_RESHAPE is set, to discourage
accidental use.

Read the 'help' for the CONFIG_MD_RAID5_RESHAPE entry.

and Make sure that you have backups, just in case.

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] md: Core of raid5 resize process

This patch provides the core of the resize/expand process.

sync_request notices if a 'reshape' is happening and acts accordingly.

It allocated new stripe_heads for the next chunk-wide-stripe in the target
geometry, marking them STRIPE_EXPANDING.

Then it finds which stripe heads in the old geometry can provide data needed
by these and marks them STRIPE_EXPAND_SOURCE.  This causes stripe_handle to
read all blocks on those stripes.

Once all blocks on a STRIPE_EXPAND_SOURCE stripe_head are read, any that are
needed are copied into the corresponding STRIPE_EXPANDING stripe_head.  Once a
STRIPE_EXPANDING stripe_head is full, it is marks STRIPE_EXPAND_READY and then
is written out and released.

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] md: Infrastructure to allow normal IO to continue while array is expanding

We need to allow that different stripes are of different effective sizes, and
use the appropriate size.  Also, when a stripe is being expanded, we must
block any IO attempts until the stripe is stable again.

Key elements in this change are:
 - each stripe_head gets a 'disk' field which is part of the key,
   thus there can sometimes be two stripe heads of the same area of
   the array, but covering different numbers of devices.  One of these
   will be marked STRIPE_EXPANDING and so won't accept new requests.
 - conf->expand_progress tracks how the expansion is progressing and
   is used to determine whether the target part of the array has been
   expanded yet or not.

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] md: Allow stripes to be expanded in preparation for expanding an array

Before a RAID-5 can be expanded, we need to be able to expand the stripe-cache
data structure.

This requires allocating new stripes in a new kmem_cache.  If this succeeds,
we copy cache pages over and release the old stripes and kmem_cache.

We then allocate new pages.  If that fails, we leave the stripe cache at it's
new size.  It isn't worth the effort to shrink it back again.

Unfortuanately this means we need two kmem_cache names as we, for a short
period of time, we have two kmem_caches.  So they are raid5/%s and
raid5/%s-alt

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] md: Split disks array out of raid5 conf structure so it is easier to grow

The remainder of this batch implements raid5 reshaping.  Currently the only
shape change that is supported is added a device, but it is envisioned that
changing the chunksize and layout will also be supported, as well as changing
the level (e.g.  1->5, 5->6).

The reshape process naturally has to move all of the data in the array, and so
should be used with caution.  It is believed to work, and some testing does
support this, but wider testing would be great for increasing my confidence.

You will need a version of mdadm newer than 2.3.1 to make use of raid5 growth.
 This is because mdadm need to take a copy of a 'critical section' at the
start of the array incase there is a crash at an awkward moment.  On restart,
mdadm will restore the critical section and allow reshape to continue.

I hope to release a 2.4-pre by early next week - it still needs a little more
polishing.

This patch:

Previously the array of disk information was included in the raid5 'conf'
structure which was allocated to an appropriate size.  This makes it awkward
to change the size of that array.  So we split it off into a separate
kmalloced array which will require a little extra indexing, but is much easier
to grow.

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] md: Update status_resync to handle LARGE devices

status_resync - used by /proc/mdstat to report the status of a resync, assumes
that device sizes will always fit into an 'unsigned long' This is no longer
the case...

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] md: Fix the 'failed' count for version-0 superblocks

We are counting failed devices twice, once of the device that is failed, and
once for the hole that has been left in the array.  Remove the former so
'failed' matches 'missing'.  Storing these counts in the superblock is a bit
silly anyway....

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] md: Add '4' to the list of levels for which bitmaps are supported

I really should make this a function of the personality....

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] md: Make sure QUEUE_FLAG_CLUSTER is set properly for md.

This flag should be set for a virtual device iff it is set for all underlying
devices.

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] dm: remove unnecessary typecast

Signed-off-by: Kevin Corry <kevcorry@us.ibm.com>
Cc: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] dm/md dependency tree in sysfs: convert bd_sem to bd_mutex

Convert bd_sem to bd_mutex

Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com>
Cc: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] dm/md dependency tree in sysfs: dm to use bd_claim_by_disk

Use bd_claim_by_disk.

Following symlinks are created if dm-0 maps to sda:
  /sys/block/dm-0/slaves/sda --> /sys/block/sda
  /sys/block/sda/holders/dm-0 --> /sys/block/dm-0

Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com>
Cc: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] dm/md dependency tree in sysfs: md to use bd_claim_by_disk

Use bd_claim_by_disk.

Following symlinks are created if md0 is built from sda and sdb
  /sys/block/md0/slaves/sda --> /sys/block/sda
  /sys/block/md0/slaves/sdb --> /sys/block/sdb
  /sys/block/sda/holders/md0 --> /sys/block/md0
  /sys/block/sdb/holders/md0 --> /sys/block/md0

Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com>
Cc: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] dm/md dependency tree in sysfs: bd_claim_by_kobject

Adding bd_claim_by_kobject() function which takes kobject as additional
signature of holder device and creates sysfs symlinks between holder device
and claimed device.  bd_release_from_kobject() is a counterpart of
bd_claim_by_kobject.

Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com>
Cc: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] dm-md-dependency-tree-in-sysfs-holders-slaves-subdirectory-tidy

Remove all the CONFIG_SYSFS stuff.  That's supposed to all be implemented up
in header files.

Yes, the CONFIG_SYSFS=n data structures will be a little larger than
necessary, but that's a tradeoff we can decide to make.

Cc: Jun'ichi Nomura <j-nomura@ce.jp.nec.com>
Cc: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] dm/md dependency tree in sysfs: holders/slaves subdirectory

Creating "slaves" and "holders" directories in /sys/block/<disk> and
creating "holders" directory under /sys/block/<disk>/<partition>

Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com>
Cc: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] dm store geometry

Allow drive geometry to be stored with a new DM_DEV_SET_GEOMETRY ioctl.
Device-mapper will now respond to HDIO_GETGEO.  If the geometry information is
not available, zero will be returned for all of the parameters.

Signed-off-by: Darrick J. Wong <djwong@us.ibm.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] dm table: store md

Store an up-pointer to the owning struct mapped_device in every table when it
is created.

Access it with:
  struct mapped_device *dm_table_get_md(struct dm_table *t)

Tables linked to md must be destroyed before the md itself.

Signed-off-by: Mike Anderson <andmike@us.ibm.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] dm: tidy mdptr

Change dm_get_mdptr() to take a struct mapped_device instead of dev_t.

Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] dm: store md name

The patch stores a printable device number in struct mapped_device for use in
warning messages and with a proposed netlink interface.

Signed-off-by: Mike Anderson <andmike@us.ibm.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] dm flush queue EINTR

If dm_suspend() is cancelled, bios already added to the deferred list need to
be submitted.  Otherwise they remain 'in limbo' until there's a dm_resume().

Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] dm snapshot: fix kcopyd destructor

Before removing a snapshot, wait for the completion of any kcopyd jobs using
it.

Do this by maintaining a count (nr_jobs) of how many outstanding jobs each
kcopyd_client has.

The snapshot destructor first unregisters the snapshot so that no new kcopyd
jobs (created by writes to the origin) will reference that particular
snapshot.  kcopyd_client_destroy() is now run next to wait for the completion
of any outstanding jobs before the snapshot exception structures (that those
jobs reference) are freed.

Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] dm: make sure QUEUE_FLAG_CLUSTER is set properly

This flag should be set for a virtual device iff it is set for all
underlying devices.

Signed-off-by: Neil Brown <neilb@suse.de>
Acked-by: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] dm: remove SECTOR_FORMAT

We don't know what type sector_t has.  Sometimes it's unsigned long, sometimes
it's unsigned long long.  For example on ppc64 it's unsigned long with
CONFIG_LBD=n and on x86_64 it's unsigned long long with CONFIG_LBD=n.

The way to handle all of this is to always use unsigned long long and to
always typecast the sector_t when printing it.

Acked-by: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] drivers/md/dm-raid1.c: Fix inconsistent mirroring after interrupted recovery

dm-mirror has potential data corruption problem: while on-disk log shows
that all disk contents are in-sync, actual contents of the disks are not
synchronized.  This problem occurs if initial recovery (synching) is
interrupted and resumed.

Attached patch fixes this problem.

Background:

rh_dec() changes the region state from RH_NOSYNC (out-of-sync) to RH_CLEAN
(in-sync), which results in the corresponding bit of clean_bits being set.

This is harmful if on-disk log is used and the map is removed/suspended
before the initial sync is completed.  The clean_bits is written down to
the on-disk log at the map removal, and, upon resume, it's read and copied
to sync_bits.  Since the recovery process refers to the sync_bits to find a
region to be recovered, the region whose state was changed from RH_NOSYNC
to RH_CLEAN is no longer recovered.

If you haven't applied dm-raid1-read-balancing.patch proposed in dm-devel
sometimes ago, the contents of the mirrored disk just corrupt silently.  If
you have, balanced read may get bogus data from out-of-sync disks.

The patch keeps RH_NOSYNC state unchanged.  It will be changed to
RH_RECOVERING when recovery starts and get reclaimed when the recovery
completes.  So it doesn't leak the region hash entry.

Description:

Keep RH_NOSYNC state unchanged when I/O on the region completes.

rh_dec() changes the region state from RH_NOSYNC (out-of-sync) to RH_CLEAN
(in-sync), which results in the corresponding bit of clean_bits being set.

This is harmful if on-disk log is used and the map is removed/suspended
before the initial sync is completed.  The clean_bits is written down to
the on-disk log at the map removal, and, upon resume, it's read and copied
to sync_bits.  Since the recovery process refers to the sync_bits to find a
region to be recovered, the region whose state was changed from RH_NOSYNC
to RH_CLEAN is no longer recovered.

If you haven't applied dm-raid1-read-balancing.patch proposed in dm-devel
sometimes ago, the contents of the mirrored disk just corrupt silently.  If
you have, balanced read may get bogus data from out-of-sync disks.

The RH_NOSYNC region will be changed to RH_RECOVERING when recovery starts
on the region and get reclaimed when the recovery completes.  So it doesn't
leak the region hash entry.

Alasdair said:

  I've analysed the relevant part of the state machine and I believe that
  the patch is correct.

  (Further work on this code is still needed - this patch has the
  side-effect of holding onto memory unnecessarily for long periods of time
  under certain workloads - but better that than corrupting data.)

Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com>
Acked-by: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] device-mapper snapshot: fix invalidation

When a snapshot becomes invalid, s->valid is set to 0.  In this state, a
snapshot can no longer be accessed.

When s->lock is acquired, before doing anything else, s->valid must be checked
to ensure the snapshot remains valid.

This patch eliminates some races (that may cause panics) by adding some
missing checks.  At the same time, some unnecessary levels of indentation are
removed and snapshot invalidation is moved into a single function that always
generates a device-mapper event.

Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] device-mapper snapshot: replace sibling list

The siblings "list" is used unsafely at the moment.

Firstly, only the element on the list being changed gets locked (via the
snapshot lock), not the next and previous elements which have pointers that
are also being changed.

Secondly, if you have two or more snapshots and write to the same chunk a
second time before every snapshot has finished making its private copy of the
data, if you're unlucky, _origin_write() could attempt its list_merge() and
dereference a 'last' pointer to a pending_exception structure that has just
been freed.

Analysis reveals that the list is actually only there for reference counting.
If 5 pending_exceptions are needed in origin_write, then the 5 are joined
together into a 5-element list - without a separate list head because there's
nowhere suitable to store it.  As the pending_exceptions complete, they are
removed from the list one-by-one and any contents of origin_bios get moved
across to one of the remaining pending_exceptions on the list.  Whichever one
is last is detected because list_empty() is then true and the origin_bios get
submitted.

The fix proposed here uses an alternative reference counting mechanism by
choosing one of the pending_exceptions as primary and maintaining an atomic
counter there.

Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] device-mapper snapshot: fix origin_write pending_exception submission

Say you have several snapshots of the same origin and then you issue a write
to some place in the origin for the first time.

Before the device-mapper snapshot target lets the write go through to the
underlying device, it needs to make a copy of the data that is about to be
overwritten.  Each snapshot is independent, so it makes one copy for each
snapshot.

__origin_write() loops through each snapshot and checks to see whether a copy
is needed for that snapshot.  (A copy is only needed the first time that data
changes.)

If a copy is needed, the code allocates a 'pending_exception' structure
holding the details.  It links these together for all the snapshots, then
works its way through this list and submits the copying requests to the kcopyd
thread by calling start_copy().  When each request is completed, the original
pending_exception structure gets freed in pending_complete().

If you're very unlucky, this structure can get freed *before* the submission
process has finished walking the list.

This patch:

  1) Creates a new temporary list pe_queue to hold the pending exception
     structures;

  2) Does all the bookkeeping up-front, then walks through the new list
     safely and calls start_copy() for each pending_exception that needed it;

  3) Avoids attempting to add pe->siblings to the list if it's already
     connected.

[NB This does not fix all the races in this code.  More patches will follow.]

Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] video/sis/init301.c:SiS_ChrontelDoSomething2(): remove dead code

The Coverity checker spotted these two unused variables.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Cc: Thomas Winischhofer <thomas@winischhofer.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] drivers/video: Use ARRAY_SIZE macro

Use ARRAY_SIZE macro instead of sizeof(x)/sizeof(x[0]) and remove
duplicates of ARRAY_SIZE.  Some coding style and trailing whitespaces are
also fixed.

Compile-tested where possible (some are other arch or BROKEN)

Signed-off-by: Tobias Klauser <tklauser@nuerscht.ch>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] fbdev: add modeline for 1680x1050@60

Add a modeline for the Philips 200W display.  aty128fb does not do DDC, it
picks 1920x1440 or similar.  It works ok with nvidiafb because it can ask
for DDC data.

mode "1680x1050-60"
    # D: 146.028 MHz, H: 65.191 kHz, V: 59.863 Hz
    geometry 1680 1050 1680 1050 16
    timings 6848 280 104 30 3 176 6
    hsync high
    vsync high
    rgba 5/11,6/5,5/0,0/0
endmode

 hwinfo --monitor
20: None 00.0: 10000 Monitor
  [Created at monitor.206]
  Unique ID: rdCR.pzUFTofo1S4
  Parent ID: 002j.bJRsY88eNSC
  Hardware Class: monitor
  Model: "PHILIPS Philips 200W"
  Vendor: PHL "PHILIPS"
  Device: eisa 0x0832 "Philips 200W"
  Serial ID: "VN  016596"
  Resolution: 720x400@70Hz
  Resolution: 640x480@60Hz
  Resolution: 640x480@67Hz
  Resolution: 640x480@72Hz
  Resolution: 640x480@75Hz
  Resolution: 800x600@56Hz
  Resolution: 800x600@60Hz
  Resolution: 800x600@72Hz
  Resolution: 800x600@75Hz
  Resolution: 832x624@75Hz
  Resolution: 1024x768@60Hz
  Resolution: 1024x768@70Hz
  Resolution: 1024x768@75Hz
  Resolution: 1280x1024@75Hz
  Resolution: 1152x864@70Hz
  Resolution: 1152x864@75Hz
  Resolution: 1280x960@60Hz
  Resolution: 1280x1024@60Hz
  Resolution: 1680x1050@60Hz
  Size: 433x271 mm
  Driver Info #0:
    Max. Resolution: 1680x1050
    Vert. Sync Range: 56-85 Hz
    Hor. Sync Range: 30-93 kHz
  Config Status: cfg=new, avail=yes, need=no, active=unknown
  Attached to: #5 (VGA compatible controller)

Signed-off-by: Olaf Hering <olh@suse.de>
Acked-by: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] sparse: Fix warnings in newport driver about non-static functions

There are more sparse warnings but fixing those will require some more work
than I want to do without hardware for testing at hand.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] Add ID for Quadro NVS280

Quadro NVS280 is a dual-head PCIe card with PCI ID 10de:00fd and subsystem ID
10de:0215.

Signed-off-by: Pavel Roskin <proski@gnu.org>
Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] imsttfb: Remove dead code

clk_p is always 0.

Coverity Bug 67

Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] atyfb: Remove dead code

Remove code that can never be reached.

Coverity Bug 67

Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] savagefb: Remove NULL check

Remove unnecessary NULL check.

Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] i810fb: Remove NULL check

Remove unnecessary NULL check.  Being a function private to the driver,
out_edid can never be NULL.

Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] nvidiafb: Remove NULL check #2

Remove unnecessary NULL check.

Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] nvidiafb: Remove NULL check

Remove unnecessary NULL check, as struct info will never be NULL.

Coverity Bug 835

Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] rivafb: Remove NULL check

Remove unnecessary NULL check, as struct info will never be NULL.

Coverity Bug 836

Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] framebuffer: cmap-setting return values

A set of 3 small bugfixes, all of which are related to bogus return values
of fb colormap-setting functions.

First, fb_alloc_cmap returns -1 if memory allocation fails. This is a hard
condition to reproduce since you'd have to be really low on memory, but from
studying the contexts in which it is called, I think this function should be
returning a negative errno, and the -1 will be seen as an EPERM. Switching it
to -ENOMEM makes sense.

Second, the store_cmap function which is called for writes to
/sys/class/graphics/fb0/color_map returns 0 for success, but it should be
returning the count of bytes written since its return value ends up in
userspace as the result of the write() syscall.

Third, radeonfb returns 1 instead of a negative errno when FBIOPUTCMAP is
called with an oversized colormap.  This is seen in userspace as a return
value of 1 from the ioctl() syscall with errno left unchanged.  A more
useful return value would be -EINVAL.

Signed-off-by: Alan Curry <pacman@TheWorld.com>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] fbdev: Make BIOS EDID reading configurable

DDC reading via the Video BIOS may take several tens of seconds with some
combination of display cards and monitors.

Make this option configurable.  It defaults to `y' to minimise disruption.

Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] au1200fb: Alchemy Au1200 framebuffer driver

Add support for Alchemy Au1200 framebuffer driver

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] matrox maven: memory allocation and other cleanups

A few cleanups which were done to almost all i2c drivers some times
ago, but matroxfb_maven was forgotten:

* Don't allocate two different structures at once.
* Use kzalloc instead of kmalloc+memset.
* Use strlcpy instead of strcpy.
* Drop duplicate error message on client deregistration failure.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Petr Vandrovec <vandrove@vc.cvut.cz>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] matroxfb: simply return what i2c_add_driver() does

insmod will tell us when the module failed to load.  We do no further
processing on the return from i2c_add_driver(), so just return what
i2c_add_driver() did, instead of storing it.

Add __init/__exit annotations while we're at it.

Signed-off-by: Arthur Othieno <apgo@patchbomb.org>
Acked-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Petr Vandrovec <petr@vandrovec.name>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] fbdev: framebuffer driver for Geode GX

A framebuffer driver for the display controller in AMD Geode GX processors
(Geode GX533, Geode GX500 etc.).  Tested at 640x480, 800x600, 1024x768 and
1280x1024 at 8, 16, and 24 bpp with both CRT and TFT.  No accelerated features
currently implemented and compression remains disabled.

This driver requires that the BIOS (or the SoftVG/Firmbase code in the BIOS)
has created an appropriate virtual PCI header.

Signed-off-by: David Vrabel <dvrabel@arcom.com>
Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] nvidiafb: add suspend and resume hooks

Add suspend and resume hooks to make software suspend more reliable.  Resuming
from standby should generally work.  Resuming from mem and from disk requires
that the GPU is disabled.  Adding these to the suspend script...

fbset -accel false -a
/* suspend here */
fbset -accel true -a

...  should generally work.  In addition, resuming from mem requires that the
video card has to be POSTed by the BIOS or some other utility.

Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] vgacon: Add support for soft scrollback

The scrollback buffer of the VGA console is located in VGA RAM.  This RAM
is fixed in size and is very small.  To make the scrollback buffer larger,
it must be placed instead in System RAM.

This patch adds this feature.  The feature and the size of the buffer are
made as a kernel config option.  Besides consuming kernel memory, this
feature will slow down the console by approximately 20%.

Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Cc: Jindrich Makovicka <makovick@kmlinux.fjfi.cvut.cz>
Cc: Martin Mares <mj@ucw.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] vgacon: fix EGA cursor resize function

This corrects cursor resize on ega boards: registers are write-only, so we
shouldn't even try to read them.  And on ega, 31/30 produces a flat cursor.
Using 31/31 is better: except with 32 pixels high fonts, it shouldn't show
up.

Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] PNP: adjust pnp_register_card_driver() signature: wavefront

Remove the assumption that pnp_register_card_driver() returns the
number of devices claimed.  And fix some __init/__devinit issues.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Cc: Adam Belay <ambx1@neo.rr.com>
Cc: Jaroslav Kysela <perex@suse.cz>
Acked-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] PNP: adjust pnp_register_card_driver() signature: sscape

Remove the assumption that pnp_register_card_driver() returns the
number of devices claimed.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Cc: Adam Belay <ambx1@neo.rr.com>
Cc: Jaroslav Kysela <perex@suse.cz>
Acked-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] PNP: adjust pnp_register_card_driver() signature: sb_card

Remove the assumption that pnp_register_card_driver() returns the
number of devices claimed.  And fix some __init/__devinit issues.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Cc: Adam Belay <ambx1@neo.rr.com>
Cc: Jaroslav Kysela <perex@suse.cz>
Acked-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] PNP: adjust pnp_register_card_driver() signature: sb16

Remove the assumption that pnp_register_card_driver() returns the
number of devices claimed.  And fix some __init/__devinit issues.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Cc: Adam Belay <ambx1@neo.rr.com>
Cc: Jaroslav Kysela <perex@suse.cz>
Acked-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] PNP: adjust pnp_register_card_driver() signature: interwave

Remove the assumption that pnp_register_card_driver() returns the
number of devices claimed.  And fix some __init/__devinit issues.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Cc: Adam Belay <ambx1@neo.rr.com>
Cc: Jaroslav Kysela <perex@suse.cz>
Acked-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] PNP: adjust pnp_register_card_driver() signature: es968

Remove the assumption that pnp_register_card_driver() returns the
number of devices claimed.  And fix some __init/__devinit issues.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Cc: Adam Belay <ambx1@neo.rr.com>
Cc: Jaroslav Kysela <perex@suse.cz>
Acked-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] PNP: adjust pnp_register_card_driver() signature: es18xx

Remove the assumption that pnp_register_card_driver() returns the
number of devices claimed.  And fix some __init/__devinit issues.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Cc: Adam Belay <ambx1@neo.rr.com>
Cc: Jaroslav Kysela <perex@suse.cz>
Acked-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] PNP: adjust pnp_register_card_driver() signature: dt019x

Remove the assumption that pnp_register_card_driver() returns the
number of devices claimed.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Cc: Adam Belay <ambx1@neo.rr.com>
Cc: Jaroslav Kysela <perex@suse.cz>
Acked-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] PNP: adjust pnp_register_card_driver() signature: cmi8330

Remove the assumption that pnp_register_card_driver() returns the
number of devices claimed.  And fix some __init/__devinit issues.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Cc: Adam Belay <ambx1@neo.rr.com>
Cc: Jaroslav Kysela <perex@suse.cz>
Acked-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] PNP: adjust pnp_register_card_driver() signature: azt2320

Remove the assumption that pnp_register_card_driver() returns the
number of devices claimed.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Cc: Adam Belay <ambx1@neo.rr.com>
Cc: Jaroslav Kysela <perex@suse.cz>
Acked-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] PNP: adjust pnp_register_card_driver() signature: als100

Remove the assumption that pnp_register_card_driver() returns the
number of devices claimed.  And fix a __init/__devinit issue.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Cc: Adam Belay <ambx1@neo.rr.com>
Cc: Jaroslav Kysela <perex@suse.cz>
Acked-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] PNP: adjust pnp_register_card_driver() signature: ad1816a

Remove the assumption that pnp_register_card_driver() returns the
number of devices claimed.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Cc: Adam Belay <ambx1@neo.rr.com>
Cc: Jaroslav Kysela <perex@suse.cz>
Acked-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] pnp: PNP: adjust pnp_register_driver signature

Remove the assumption that pnp_register_driver() returns the number of devices
claimed.  Returning the count is unreliable because devices may be hot-plugged
in the future.

This changes the convention to "zero for success, or a negative error value,"
which matches pci_register_driver(), acpi_bus_register_driver(), and
platform_driver_register().

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Cc: Adam Belay <ambx1@neo.rr.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] pnp: cs4232: adjust pnp_register_driver signature

Remove the assumption that pnp_register_driver() returns the number of devices
claimed.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Cc: Adam Belay <ambx1@neo.rr.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] pnp: IRDA: adjust pnp_register_driver signature

Remove the assumption that pnp_register_driver() returns the number of devices
claimed.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Cc: Adam Belay <ambx1@neo.rr.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] pnp: opl3sa2: adjust pnp_register_driver signature

Remove the assumption that pnp_register_driver() returns the number of devices
claimed.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Cc: Adam Belay <ambx1@neo.rr.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] pnp: cs4236: adjust pnp_register_driver signature

Remove the assumption that pnp_register_driver() returns the number of devices
claimed.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Cc: Adam Belay <ambx1@neo.rr.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] pnp: mpu401: adjust pnp_register_driver signature

This series of patches removes the assumption that pnp_register_driver()
returns the number of devices claimed.  Returning the count is unreliable
because devices may be hot-plugged in the future.  (Many devices don't support
hot-plug, of course, but PNP in general does.)

This changes the convention to "zero for success, or a negative error value,"
which matches pci_register_driver(), acpi_bus_register_driver(), and
platform_driver_register().

If drivers need to know the number of devices, they can count calls to their
.probe() methods.

This patch:

Remove the assumption that pnp_register_driver() returns the number of devices
claimed.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Cc: Adam Belay <ambx1@neo.rr.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] pnp: parport: adjust pnp_register_driver signature

Remove the assumption that pnp_register_driver() returns the number of devices
claimed.

parport_pc_init() does nothing with "count", so remove it.  Then nobody uses
the return value of parport_pc_find_ports(), so make it void.  Finally, update
pnp_register_driver() usage.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Cc: Adam Belay <ambx1@neo.rr.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] RTC subsystem: M48T86 driver

Add a driver for the ST M48T86 / Dallas DS12887 RTC.

This is a platform driver.  The platform device must provide I/O routines to
access the RTC.

Signed-off-by: Alessandro Zummo <a.zummo@towertech.it>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] RTC subsystem: SA1100/PXA2XX driver

Add an RTC subsystem driver for the ARM SA1100/PXA2XX processor RTC.

Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] RTC subsystem: EP93XX driver

This patch adds a driver for the RTC embedded in the Cirrus Logic EP93XX
family of processors.

Signed-off-by: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] RTC subsystem: RS5C372 driver

RTC class aware driver for the Ricoh RS5C372 chip used, among others, on the
Synology DS101.

Signed-off-by: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] RTC subsystem: PCF8563 driver

An RTC class aware driver for the Philips PCF8563 RTC and Epson RTC8564 chips.

This chip is used on the Iomega NAS100D.

Signed-off-by: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] RTC subsystem: DS1672 driver

Driver for the Dallas/Maxim DS1672 chip, found on the Loft
(http://www.giantshoulderinc.com).

Signed-off-by: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] RTC subsystem: test device/driver

Interrupts can be generated by

echo "alarm|tick|update" >/sys/class/rtc/rtcX/device/irq

Signed-off-by: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] RTC subsystem: X1205 driver

A port of the existing x1205 driver under the new RTC subsystem.

It is actually under test within the NSLU2 project
(http://www.nslu2-linux.org) and it is working quite well.

It is the first driver under this new subsystem and should be used as a guide
to port other drivers.

Signed-off-by: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] RTC subsystem: dev interface

Add the dev interface to the RTC subsystem.

Each RTC will be available under /dev/rtcX .  A symlink from /dev/rtc0 to
/dev/rtc cab be obtained with the following udev rule:

KERNEL=="rtc0", SYMLINK+="rtc"

Signed-off-by: Alessandro Zummo <a.zummo@towertech.it>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] RTC subsystem: proc interface

Add the proc interface to the RTC subsystem.

The first RTC driver which registers with the class will be accessible by
/proc/driver/rtc .

This is required for compatibility with the standard RTC driver and to avoid
breaking any user space application which may erroneusly rely on this.

Signed-off-by: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] RTC subsystem: sysfs interface

This patch adds the sysfs interface to the RTC subsystem.

Each RTC client will have his own entry under /sys/classs/rtc/rtcN .

Within this entry some attributes are exported by the subsystem, like date and
time.

Signed-off-by: Alessandro Zummo <a.zummo@towertech.it>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] RTC subsystem: I2C driver ids

This patch adds the I2C driver ids to i2c-id.h in preparation of the I2C
direct probing method.

This is kept separate so that it can be integrated to

Signed-off-by: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] RTC subsystem: I2C cleanup

This patch, completely optional, removes from drivers/i2c/chips all the
drivers that are implemented in the new RTC subsystem.

It should be noted that none of the current driver is actually integrated,
i.e.  usable without further patches.

Signed-off-by: Alessandro Zummo <a.zummo@towertech.it>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] RTC subsystem: class

Add the basic RTC subsystem infrastructure to the kernel.

rtc/class.c - registration facilities for RTC drivers
rtc/interface.c - kernel/rtc interface functions
rtc/hctosys.c - snippet of code that copies hw clock to sw clock
at bootup, if configured to do so.

Signed-off-by: Alessandro Zummo <a.zummo@towertech.it>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] RTC subsystem: ARM Integrator cleanup

Fix some namespace conflicts between the RTC subsystem and the ARM Integrator
time functions.

Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] RTC subsystem: ARM cleanup

This patch removes from the ARM subsytem some of the rtc-related functions
that have been included in the RTC subsystem.  It also fixes some naming
collisions.

Signed-off-by: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>