USB-BKL: Remove lock_kernel in usbfs update_sb()

The code this is attempting to lock against does not use the BKL,
so it's not needed.

Most likely this code is still broken/racy (Al Viro also thinks so),
but removing the BKL should not make it worse than before.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

usb: atm: fixed spacing and indentation coding style issues

Fixed spacing and indentation coding style issues.

Signed-off-by: Nicolas Kaiser <nikai@nikai.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

USB: Add a serial number parameter to g_file_storage module

This patch add a serial number parameter to the g_file_storage
module. There's validity checks against the string passed to comply
with the specs.

Signed-off-by: Yann Cantin <yann.cantin@laposte.net>
Cc: Michał Nazarewicz <m.nazarewicz@samsung.com>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

usb: conexant: fixed spacing and brace coding style issues

Fixed spacing and brace coding style issues.

Signed-off-by: Nicolas Kaiser <nikai@nikai.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

USB: gadget: langwell_udc.c: printk needs a (unsigned long long) cast for a dma_t

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Revert "USB: Adding support for HTC Smartphones to ipaq"

ipaq already had this device id defined:

{ USB_DEVICE(0x0BB4, 0x00CF) }, /* HTC USB Modem */

Revert the commit which adds the duplicate entry.

This reverts commit 04cab1329336d4577d6638360c905e360934b425.

Originally-by: Ben Collins <ben.collins@canonical.com>
Signed-off-by: Leann Ogasawara <leann.ogasawara@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

USB: option: Remove duplicate AMOI_VENDOR_ID

AMOI_VENDOR_ID is defined twice.  Remove the duplicate entry and move
the AMOI_PRODUCT_9508 definition to be grouped with the other AMOI
product definitions.

Originally-by: Ben Collins <ben.collins@ubuntu.com>
Signed-off-by: Leann Ogasawara <leann.ogasawara@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

USB: EHCI: EHCI 1.1 addendum: Enable Per-port change detect bits

This patch will enable Per-port event feature defined in EHCI 1.1
addendum. This feature addresses an issue where HCD is currently
required to read and parse PORTSC for all enabled root hub ports. With
this patch, the overhead will be reduced.

Signed-off-by: Alek Du <alek.du@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

USB: EHCI: EHCI 1.1 addendum: Basic LPM feature support

With this patch, the LPM capable EHCI host controller can put device
into L1 sleep state which is a mode that can enter/exit quickly, and
reduce power consumption.

Signed-off-by: Jacob Pan <jacob.jun.pan@intel.com>
Signed-off-by: Alek Du <alek.du@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

USB: EHCI: EHCI 1.1 addendum: preparation

EHCI 1.1 addendum introduced several energy efficiency extensions for
EHCI USB host controllers:
1. LPM (link power management)
2. Per-port change
3. Shorter periodic frame list
4. Hardware prefetching

This patch is intended to define the HW bits and debug interface for
EHCI 1.1 addendum. The LPM and Per-port change patches will be sent out
after this patch.

Signed-off-by: Jacob Pan <jacob.jun.pan@intel.com>
Signed-off-by: Alek Du <alek.du@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

usb: throw away custom hex digit methods

Recent kernel has common method to convert hex digit to its value.

Signed-off-by: Andy Shevchenko <ext-andriy.shevchenko@nokia.com>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

USB: isd200.c: Remove unnecessary kmalloc cast

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

USB: host: Eliminate NULL dereference

The test above allows std to be NULL, so check that std is not NULL before
doing the dereference.

A simplified version of the semantic match that finds this problem is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
@r exists@
expression E,E1;
identifier f;
statement S1,S2,S3;
@@

if ((E == NULL && ...) || ...)
{
  ... when != if (...) S1 else S2
      when != E = E1
* E->f
  ... when any
}
else S3
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

USB: otg.h: Fix the mixup in parameters order.

otg_io_write() function does not follow the declaration of
struct otg_io_access_ops.

Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

USB: core endpoint: Fix Coding Styles

Fixed coding styles in the core usb endpoint.

Signed-off-by: Carlos Sánchez Acosta <csanchez@neurowork.net>
Signed-off-by: Alejandro Sánchez Acosta <asanchez@neurowork.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

USB: core driver: Fix Coding Styles

Fixed coding styles in the core usb driver.

Signed-off-by: Carlos Sánchez Acosta <csanchez@neurowork.net>
Signed-off-by: Alejandro Sánchez Acosta <asanchez@neurowork.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

USB: Documentation/usb/linux.inf: Checkpatch cleanup

Documentation/usb/linux.inf:66: ERROR: trailing whitespace
Documentation/usb/linux.inf:67: ERROR: trailing whitespace
Documentation/usb/linux.inf:98: ERROR: trailing whitespace
Documentation/usb/linux.inf:99: ERROR: trailing whitespace
Documentation/usb/linux.inf:115: ERROR: trailing whitespace
Documentation/usb/linux.inf:116: ERROR: trailing whitespace
Documentation/usb/linux.inf:120: ERROR: trailing whitespace
Documentation/usb/linux.inf:121: ERROR: trailing whitespace
Documentation/usb/linux.inf:122: ERROR: trailing whitespace
Documentation/usb/linux.inf:123: ERROR: trailing whitespace
Documentation/usb/linux.inf:144: ERROR: trailing whitespace
Documentation/usb/linux.inf:145: ERROR: trailing whitespace
Documentation/usb/linux.inf:146: ERROR: trailing whitespace
Documentation/usb/linux.inf:147: ERROR: trailing whitespace
Documentation/usb/linux.inf:158: ERROR: trailing whitespace

Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

USB: Documentation/usb/hotplug.txt: Checkpatch cleanup

Documentation/usb/hotplug.txt:13: ERROR: trailing whitespace
Documentation/usb/hotplug.txt:87: ERROR: trailing whitespace

Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

USB: Documentation/usb/ehci.txt: Checkpatch cleanup

Documentation/usb/ehci.txt:12: ERROR: trailing whitespace

Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

USB: gadget: Use memdup_user

Use memdup_user when user data is immediately copied into the
allocated region.

The semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@@
expression from,to,size,flag;
position p;
identifier l1,l2;
@@

-  to = \(kmalloc@p\|kzalloc@p\)(size,flag);
+  to = memdup_user(from,size);
   if (
-      to==NULL
+      IS_ERR(to)
                 || ...) {
   <+... when != goto l1;
-  -ENOMEM
+  PTR_ERR(to)
   ...+>
   }
-  if (copy_from_user(to, from, size) != 0) {
-    <+... when != goto l2;
-    -EFAULT
-    ...+>
-  }
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

USB: EHCI: make CONFIG_USB_EHCI_TT_NEWSCHED default to Y

This patch (as1382) changes the USB_EHCI_TT_NEWSCHED Kconfig option to
be non-experimental and to default to Y.  This option has existed for
a long time, and I have not heard any complaints concerning it.  By
contrast, several people have reported that their devices could be
made to work only by enabling the option.

The point of changing the default is to cause the option to be enabled
by distros that simply use the default settings for esoteric things
like this.

This change was motivated by Bugzilla #15649.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
CC: David Brownell <david-b@pacbell.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

USB: iuu_phoenix: Add support for different baud rates.

Signed-off-by: James Courtier-Dutton <James@superbug.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

USB: xhci: Remove obsolete debugging printk.

When code to manipulate the command register was refactored from
xhci_run() to xhci_start(), a debugging statement was left behind that no
longer applies.  Remove that statement.

Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Reported-by: Sergei Shtylyov <sshtylyov@mvista.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

USB: speedtouch: fixed more brace and spacing coding style issues

Fixed spacing coding style issues.

Signed-off-by: Nicolas Kaiser <nikai@nikai.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

USB: speedtouch: fixed brace and spacing coding style issues

Fixed brace coding style issues.

Signed-off-by: Nicolas Kaiser <nikai@nikai.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

USB: UHCI: acquire spinlock before calling start_rh()

This patch (as1392) fixes a bug in uhci-hcd: The start_rh() routine is
supposed to be called with the private spinlock held.  If an IRQ comes
in at just the wrong time, the driver will think the controller has
died when in fact it simply hasn't start yet.

The patch also addresses some issues that may prevent an URB from
being unlinked after the controller has stopped.  This is an abnormal
occurrence (ordinarily the controller stops only when the entire bus
is suspended and hence there are no active URBs), so the pathways
haven't gotten much testing.  These two changes may be a little more
than is strictly necessary, but clearly they won't hurt.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

USB: add check to detect host controller hardware removal

This patch (as1391) fixes a problem that can occur when USB host
controller hardware is hot-unplugged.  If no interrupts are generated
by the unplug then the HCD may not realize that the controller is
gone, and the subsequent unbind may hang waiting for interrupts that
never arrive.

The solution (for PCI-based controllers) is to call the HCD's
interrupt handler at the start of usb_hcd_pci_remove().  If the
hardware is gone, the handler will realize this when it tries to read
the controller's status register.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

USB: don't stop root-hub status polls too soon

This patch (as1390) fixes a problem that crops up when a UHCI host
controller is unbound from uhci-hcd while there are still some active
URBs.  The URBs have to be unlinked when the root hub is unregistered,
and uhci-hcd relies upon root-hub status polls as part of its
unlinking procedure.  But usb_hcd_poll_rh_status() won't make those
status calls if hcd->rh_registered is clear, and the flag is cleared
_before_ the unregistration takes place.

Since hcd->rh_registered is used for other things and needs to be
cleared early, the solution is to add a new flag (rh_pollable) and use
it instead.  It gets cleared _after_ the root hub is unregistered.

Now that the status polls don't end too soon, we have to make sure
they also don't occur too late -- after the root hub's usb_device
structure or the HCD's private structures are deallocated.  Therefore
the patch adds usb_get_device() and usb_put_device() calls to protect
the root hub structure, and it adds an extra del_timer_sync() to
prevent the root-hub timer from causing an unexpected status poll.

This additional complexity would not be needed if the HCD framework
had provided separate stop() and release() callbacks instead of just
stop().  This lack could be fixed at some future time (although it
would require changes to every host controller driver); when that
happens this patch won't be needed any more.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

USB: fix failure path in usb_add_hcd()

This patch (as1389) fixes some errors in the failure pathway of
usb_add_hcd().  The actions it takes ought to be exactly the same as
those taken by usb_remove_hcd(), but they aren't.

In one case (removal of the usb_bus_attr_group), the two routines are
brought into agreement by changing usb_remove_hcd().  All the other
discrepancies are fixed by changing usb_add_hcd().

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Merge branch 'writable_limits' of git://decibel.fi.muni.cz/~xslaby/linux

* 'writable_limits' of git://decibel.fi.muni.cz/~xslaby/linux:
  unistd: add __NR_prlimit64 syscall numbers
  rlimits: implement prlimit64 syscall
  rlimits: switch more rlimit syscalls to do_prlimit
  rlimits: redo do_setrlimit to more generic do_prlimit
  rlimits: add rlimit64 structure
  rlimits: do security check under task_lock
  rlimits: allow setrlimit to non-current tasks
  rlimits: split sys_setrlimit
  rlimits: selinux, do rlimits changes under task_lock
  rlimits: make sure ->rlim_max never grows in sys_setrlimit
  rlimits: add task_struct to update_rlimit_cpu
  rlimits: security, add task_struct to setrlimit

Fix up various system call number conflicts.  We not only added fanotify
system calls in the meantime, but asm-generic/unistd.h added a wait4
along with a range of reserved per-architecture system calls.

Merge git://git.infradead.org/mtd-2.6

* git://git.infradead.org/mtd-2.6: (79 commits)
  mtd: Remove obsolete <mtd/compatmac.h> include
  mtd: Update copyright notices
  jffs2: Update copyright notices
  mtd-physmap: add support users can assign the probe type in board files
  mtd: remove redwood map driver
  mxc_nand: Add v3 (i.MX51) Support
  mxc_nand: support 8bit ecc
  mxc_nand: fix correct_data function
  mxc_nand: add V1_V2 namespace to registers
  mxc_nand: factor out a check_int function
  mxc_nand: make some internally used functions overwriteable
  mxc_nand: rework get_dev_status
  mxc_nand: remove 0xe00 offset from registers
  mtd: denali: Add multi connected NAND support
  mtd: denali: Remove set_ecc_config function
  mtd: denali: Remove unuseful code in get_xx_nand_para functions
  mtd: denali: Remove device_info_tag structure
  mtd: m25p80: add support for the Winbond W25Q32 SPI flash chip
  mtd: m25p80: add support for the Intel/Numonyx {16,32,64}0S33B SPI flash chips
  mtd: m25p80: add support for the EON EN25P{32, 64} SPI flash chips
  ...

Fix up trivial conflicts in drivers/mtd/maps/{Kconfig,redwood.c} due to
redwood driver removal.

Merge branch 'for-linus' of git://git./linux/kernel/git/bcopeland/omfs

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/bcopeland/omfs:
  omfs: fix uninitialized variable warning
  omfs: sanity check cluster size
  omfs: refuse to mount if bitmap pointer is obviously wrong
  omfs: check bounds on block numbers before passing to sb_bread
  omfs: fix memory leak

Merge branch 'for-linus' of git://git.infradead.org/users/eparis/notify

* 'for-linus' of git://git.infradead.org/users/eparis/notify: (132 commits)
  fanotify: use both marks when possible
  fsnotify: pass both the vfsmount mark and inode mark
  fsnotify: walk the inode and vfsmount lists simultaneously
  fsnotify: rework ignored mark flushing
  fsnotify: remove global fsnotify groups lists
  fsnotify: remove group->mask
  fsnotify: remove the global masks
  fsnotify: cleanup should_send_event
  fanotify: use the mark in handler functions
  audit: use the mark in handler functions
  dnotify: use the mark in handler functions
  inotify: use the mark in handler functions
  fsnotify: send fsnotify_mark to groups in event handling functions
  fsnotify: Exchange list heads instead of moving elements
  fsnotify: srcu to protect read side of inode and vfsmount locks
  fsnotify: use an explicit flag to indicate fsnotify_destroy_mark has been called
  fsnotify: use _rcu functions for mark list traversal
  fsnotify: place marks on object in order of group memory address
  vfs/fsnotify: fsnotify_close can delay the final work in fput
  fsnotify: store struct file not struct path
  ...

Fix up trivial delete/modify conflict in fs/notify/inotify/inotify.c.

Merge branch 'for-linus' of git://git./linux/kernel/git/viro/vfs-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: (96 commits)
  no need for list_for_each_entry_safe()/resetting with superblock list
  Fix sget() race with failing mount
  vfs: don't hold s_umount over close_bdev_exclusive() call
  sysv: do not mark superblock dirty on remount
  sysv: do not mark superblock dirty on mount
  btrfs: remove junk sb_dirt change
  BFS: clean up the superblock usage
  AFFS: wait for sb synchronization when needed
  AFFS: clean up dirty flag usage
  cifs: truncate fallout
  mbcache: fix shrinker function return value
  mbcache: Remove unused features
  add f_flags to struct statfs(64)
  pass a struct path to vfs_statfs
  update VFS documentation for method changes.
  All filesystems that need invalidate_inode_buffers() are doing that explicitly
  convert remaining ->clear_inode() to ->evict_inode()
  Make ->drop_inode() just return whether inode needs to be dropped
  fs/inode.c:clear_inode() is gone
  fs/inode.c:evict() doesn't care about delete vs. non-delete paths now
  ...

Fix up trivial conflicts in fs/nilfs2/super.c

Merge git://git./linux/kernel/git/davem/net-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (59 commits)
  igbvf.txt: Add igbvf Documentation
  igb.txt: Add igb documentation
  e100/e1000*/igb*/ixgb*: Add missing read memory barrier
  ixgbe: fix build error with FCOE_CONFIG without DCB_CONFIG
  netxen: protect tx timeout recovery by rtnl lock
  isdn: gigaset: use after free
  isdn: gigaset: add missing unlock
  solos-pci: Fix race condition in tasklet RX handling
  pkt_sched: Fix sch_sfq vs tcf_bind_filter oops
  net: disable preemption before call smp_processor_id()
  tcp: no md5sig option size check bug
  iwlwifi: fix locking assertions
  iwlwifi: fix TX tracer
  isdn: fix information leak
  net: Fix napi_gro_frags vs netpoll path
  usbnet: remove noisy and hardly useful printk
  rtl8180: avoid potential NULL deref in rtl8180_beacon_work
  ath9k: Remove myself from the MAINTAINERS list
  libertas: scan before assocation if no BSSID was given
  libertas: fix association with some APs by using extended rates
  ...

Merge git://git./linux/kernel/git/davem/ide-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide-2.6:
  tx493xide: use min_t() macro instead of min()
  drivers/ide: Use memdup_user
  via82cxxx: fix typo for VT6415 PCIE PATA IDE Host Controller support.
  ide-cd: Do not access completed requests in the irq handler

Merge git://git./linux/kernel/git/davem/sparc-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6:
  sparc64: Update defconfig.
  sparc: Kill user copy check code.
  sparc64: Fix perf_arch_get_caller_regs().
  sparc64: Add missing ID to parport probing code.

Merge branch 'rs485fix' of git://www.jni.nu/cris

* 'rs485fix' of git://www.jni.nu/cris:
  CRIS: ioctl for getting RS485 information

Merge branch 'merge' of git://git./linux/kernel/git/benh/powerpc

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
  powerpc: fix build with make 3.82
  Revert "Input: appletouch - fix integer overflow issue"
  memblock: Fix memblock_is_region_reserved() to return a boolean
  powerpc: Trim defconfigs
  powerpc: fix i8042 module build error
  sound/soc: mpc5200_psc_ac97: Use gpio pins for cold reset
  powerpc/5200: add mpc5200_psc_ac97_gpio_reset

Merge branch 'for-linus' of git://git./linux/kernel/git/vapier/blackfin

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/vapier/blackfin: (32 commits)
  Blackfin: gpio: add a debounce stub
  Blackfin: update defconfigs
  Blackfin: remove CONFIG_MEM_GENERIC_BOARD
  Blackfin: dpmc: punt unnecessary RTC_ISTAT clearing
  Blackfin: unify rotary encoder bitmasks
  Blackfin: unify SDH/RSI bitmasks
  Blackfin: BF54x: tweak DMAC MMR naming to match other ports
  Blackfin: TWI: clean up the MMR names
  Blackfin: add EVT_OVERRIDE/IPRIO core MMR helpers
  Blackfin: add support for dynamic ftrace
  Blackfin: add support for LZO compressed kernels
  Blackfin: portmux: fix peripheral map overflow when requesting pins
  Blackfin: document SPI CS limitations with CPHA=0
  Blackfin: remove useless and outdated documentation
  Blackfin: BF51x/BF52x: support GPIO Hysteresis/Schmitt Trigger options
  Blackfin: gpio/portmux: clean up whitespace corruption
  Blackfin: make sure mmiowb inserts a write barrier with SSYNC
  Blackfin: fix DMA/cache bug when resuming from suspend to RAM
  Blackfin: BF51x: fix handling of PH8 (the "internal" SPI0SEL4 pin)
  Blackfin: add a GPIO_DEFAULT_BOOT_SPI_CS
  ...

Merge branch 'next' of git://git./linux/kernel/git/djbw/async_tx

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx: (30 commits)
  DMAENGINE: at_hdmac: locking fixlet
  DMAENGINE: pch_dma: kill another usage of __raw_{read|write}l
  dma: dmatest: fix potential sign bug
  ioat2: catch and recover from broken vtd configurations v6
  DMAENGINE: add runtime slave control to COH 901 318 v3
  DMAENGINE: add runtime slave config to DMA40 v3
  DMAENGINE: generic slave channel control v3
  dmaengine: Driver for Topcliff PCH DMA controller
  intel_mid: Add Mrst & Mfld DMA Drivers
  drivers/dma: Eliminate a NULL pointer dereference
  dma/timb_dma: compile warning on 32 bit
  DMAENGINE: ste_dma40: support older silicon
  DMAENGINE: ste_dma40: support disabling physical channels
  DMAENGINE: ste_dma40: no disabled phy channels on ux500
  DMAENGINE: ste_dma40: fix suspend bug
  DMAENGINE: ste_dma40: add DB8500 memcpy channels
  DMAENGINE: ste_dma40: no flow control on memcpy
  DMAENGINE: ste_dma40: arch updates for LCLA and LCPA
  DMAENGINE: ste_dma40: allocate LCLA dynamically
  DMAENGINE: ste_dma40: no premature stop
  ...

Fix up trivial conflicts in arch/arm/mach-ux500/devices-db8500.c

drivers/char/vt.c:vc_do_resize(): local var `end' should be unsigned long

According include/linux/console_struct.h,vc_scr_end is unsigned long.

struct vc_data {
    unsigned short  vc_num;         /* Console number */
    unsigned int    vc_cols;        /* [#] Console size */
    unsigned int    vc_rows;
    unsigned int    vc_size_row;        /* Bytes per row */
    unsigned int    vc_scan_lines;      /* # of scan lines */
    unsigned long   vc_origin;      /* [!] Start of real screen */
    unsigned long   vc_scr_end;     /* [!] End of real screen */
    unsigned long   vc_visible_origin;  /* [!] Top of visible window */
    unsigned int    vc_top, vc_bottom;  /* Scrolling region */
    const struct consw *vc_sw;
    unsigned short  *vc_screenbuf;
...
}

Signed-off-by: qiaochong <qiaochong@loongson.cn>
Cc: Greg KH <greg@kroah.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/char/vt.c: fix vc->vc_origin on take_over_console()

kernel will die on some platform when switch from vga mode to framebuffer
mode.  The reason of this bug is that bind_con_driver reset vc->vc_origin
to (unsigned long)vc->vc_screenbuf.

On vgacon vc->vc_origin is not releated to vc->vc_screenbuf,if set
vc->vc_origin to vc->vc_screenbuf,kernel will die on vc_do_resize.

static int vc_do_resize(struct tty_struct *tty, struct tty_struct *real_tty,
        struct vc_data *vc, unsigned int cols, unsigned int lines)
{
    unsigned long old_origin, new_origin, new_scr_end, rlth, rrem, err = 0;
    unsigned int old_cols, old_rows, old_row_size, old_screen_size;
    unsigned int new_cols, new_rows, new_row_size, new_screen_size;
    unsigned int end, user;
...
        end = (old_rows > new_rows) ? old_origin +
            (old_row_size * new_rows) :
            vc->vc_scr_end;

...
/*
here for a test from vgacon to framebuffer:
old_origin=0x810814a0,end=0xb00b8fa0,vc->vc_origin=0x810814a0
the code bellow will copy memory from 0x810814a0 to 0xb00b8fa0,
this will cover kernel code,kernel died here.
*/

    while (old_origin < end) {

        scr_memcpyw((unsigned short *) new_origin,
                (unsigned short *) old_origin, rlth);
        if (rrem)
            scr_memsetw((void *)(new_origin + rlth),
                    vc->vc_video_erase_char, rrem);
        old_origin += old_row_size;
        new_origin += new_row_size;
    }

...
}

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: qiaochong <qiaochong@loongson.cn>
Cc: Greg KH <greg@kroah.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

rwsem: smaller wrappers around rwsem_down_failed_common

More code can be pushed from rwsem_down_read_failed and
rwsem_down_write_failed into rwsem_down_failed_common.

Following change adding down_read_critical infrastructure support also
enjoys having flags available in a register rather than having to fish it
out in the struct rwsem_waiter...

Signed-off-by: Michel Lespinasse <walken@google.com>
Acked-by: David Howells <dhowells@redhat.com>
Cc: Mike Waychison <mikew@google.com>
Cc: Suleiman Souhlal <suleiman@google.com>
Cc: Ying Han <yinghan@google.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

rwsem: wake queued readers when writer blocks on active read lock

This change addresses the following situation:

- Thread A acquires the rwsem for read
- Thread B tries to acquire the rwsem for write, notices there is already
  an active owner for the rwsem.
- Thread C tries to acquire the rwsem for read, notices that thread B already
  tried to acquire it.
- Thread C grabs the spinlock and queues itself on the wait queue.
- Thread B grabs the spinlock and queues itself behind C. At this point A is
  the only remaining active owner on the rwsem.

In this situation thread B could notice that it was the last active writer
on the rwsem, and decide to wake C to let it proceed in parallel with A
since they both only want the rwsem for read.

Signed-off-by: Michel Lespinasse <walken@google.com>
Acked-by: David Howells <dhowells@redhat.com>
Cc: Mike Waychison <mikew@google.com>
Cc: Suleiman Souhlal <suleiman@google.com>
Cc: Ying Han <yinghan@google.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

rwsem: let RWSEM_WAITING_BIAS represent any number of waiting threads

Previously each waiting thread added a bias of RWSEM_WAITING_BIAS.  With
this change, the bias is added only once to indicate that the wait list is
non-empty.

This has a few nice properties which will be used in following changes:
- when the spinlock is held and the waiter list is known to be non-empty,
  count < RWSEM_WAITING_BIAS  <=>  there is an active writer on that sem
- count == RWSEM_WAITING_BIAS  <=>  there are waiting threads and no
                                     active readers/writers on that sem

Signed-off-by: Michel Lespinasse <walken@google.com>
Acked-by: David Howells <dhowells@redhat.com>
Cc: Mike Waychison <mikew@google.com>
Cc: Suleiman Souhlal <suleiman@google.com>
Cc: Ying Han <yinghan@google.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

rwsem: lighter active count checks when waking up readers

In __rwsem_do_wake(), we can skip the active count check unless we come
there from up_xxxx().  Also when checking the active count, it is not
actually necessary to increment it; this allows us to get rid of the read
side undo code and simplify the calculation of the final rwsem count
adjustment once we've counted the reader threads to wake.

The basic observation is the following.  When there are waiter threads on
a rwsem and the spinlock is held, other threads can only increment the
active count by trying to grab the rwsem in down_xxxx().  However
down_xxxx() will notice there are waiter threads and take the down_failed
path, blocking to acquire the spinlock on the way there.  Therefore, a
thread observing an active count of zero with waiters queued and the
spinlock held, is protected against other threads acquiring the rwsem
until it wakes the last waiter or releases the spinlock.

Signed-off-by: Michel Lespinasse <walken@google.com>
Acked-by: David Howells <dhowells@redhat.com>
Cc: Mike Waychison <mikew@google.com>
Cc: Suleiman Souhlal <suleiman@google.com>
Cc: Ying Han <yinghan@google.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

rwsem: fully separate code paths to wake writers vs readers

This is in preparation for later changes in the series.

In __rwsem_do_wake(), the first queued waiter is checked first in order to
determine whether it's a writer or a reader.  The code paths diverge at
this point.  The code that checks and increments the rwsem active count is
duplicated on both sides - the point is that later changes in the series
will be able to independently modify both sides.

Signed-off-by: Michel Lespinasse <walken@google.com>
Acked-by: David Howells <dhowells@redhat.com>
Cc: Mike Waychison <mikew@google.com>
Cc: Suleiman Souhlal <suleiman@google.com>
Cc: Ying Han <yinghan@google.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

hwmon: f71882fg: add support for the Fintek F71808E

Allow device probing to recognise the Fintek F71808E.

Sysfs interface:
 * Fan/pwm control is the same as for F71889FG
 * Temperature and voltage sensor handling is largely the same as for
   the F71889FG
  - Has one temperature sensor less (doesn't have temp3)
  - Misses one voltage sensor (doesn't have V6, thus in6_input refers to
    what in7_input refers for F71889FG)

For the purpose of the sysfs interface fxxxx_in_temp_attr[] is split up
such that it can largely be reused.

Signed-off-by: Giel van Schijndel <me@mortis.eu>
Cc: Jean Delvare <khali@linux-fr.org>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/hwmon/coretemp.c: remove unneeded #ifdef CONFIG_HOTPLUG_CPU

register_hotcpu_notifier() is designed to make these ifdefs unnecessary.

Cc: Chen Gong <gong.chen@linux.intel.com>
Cc: Rudolf Marek <r.marek@assembler.cz>
Cc: Huaxu Wan <huaxu.wan@intel.com>
Cc: Jean Delvare <khali@linux-fr.org>
Cc: Guenter Roeck <guenter.roeck@ericsson.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

hwmon: coretemp: documentation update and cleanup

Update coretemp supported CPU TjMax lists and some cleanup work.

Signed-off-by: Chen Gong <gong.chen@linux.intel.com>
Cc: Rudolf Marek <r.marek@assembler.cz>
Cc: Huaxu Wan <huaxu.wan@intel.com>
Cc: Jean Delvare <khali@linux-fr.org>
Cc: Guenter Roeck <guenter.roeck@ericsson.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

hwmon: coretemp: enable coretemp device add operation failure

If one coretemp device can't be added, it should allow subsequent adding
operation because every new-added device will create a new sysfs group,
not an additional sensor sys entry.

Signed-off-by: Chen Gong <gong.chen@linux.intel.com>
Cc: Rudolf Marek <r.marek@assembler.cz>
Cc: Huaxu Wan <huaxu.wan@intel.com>
Cc: Jean Delvare <khali@linux-fr.org>
Cc: Guenter Roeck <guenter.roeck@ericsson.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

hwmon: coretemp: update hotplug condition check

Fix two errors in hotplug.  One is for hotplug notifier.  The other is
unnecessary driver unregister.  Because even none of online cpus supports
coretemp, we can't assume new onlined cpu doesn't support it either.  If
related driver is unregistered there we have no chance to use coretemp
from then on.

Signed-off-by: Chen Gong <gong.chen@linux.intel.com>
Cc: Rudolf Marek <r.marek@assembler.cz>
Cc: Huaxu Wan <huaxu.wan@intel.com>
Cc: Jean Delvare <khali@linux-fr.org>
Cc: Guenter Roeck <guenter.roeck@ericsson.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

hwmon: add support for JEDEC JC 42.4 compliant temperature sensors

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Cc: Jean Delvare <khali@linux-fr.org>
Cc: Randy Dunlap <rdunlap@xenotime.net>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

hwmon: driver for SMM665 Six-Channel Active DC Output Controller/Monitor

This driver adds support for the monitoring features of the Summit
Microelectronics SMM665 Six-Channel Active DC Output Controller/Monitor.

Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Cc: Jean Delvare <khali@linux-fr.org>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

hmc6352: add driver for the HMC6352 compass

This driver will report the heading values in degrees to the sysfs
interface.  The values returned are headings .  e.g.  245.6

Alan: Cleanups requested now all folded in and a sysfs description to keep
Andrew happy. The sysfs description now resembles hwmon.

Signed-off-by: Kalhan Trisal <kalhan.trisal@intel.com>
Reviewed-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Cc: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/hwmon/hdaps.c: add Lenovo Thinkpad T400 to the whitelist

Add Lenovo Thinkpad T400.  I have done the testing on my laptop.  The
hdaps module detects the device and the hdapsd daemon is able to [un]park
the disk.

Signed-off-by: Ritesh Raj Sarraf <rrs@debian.org>
Cc: Frank Seidel <frank@f-seidel.de>
Cc: Dmitry Torokhov <dtor@mail.ru>
Cc: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

checkpatch: fix extraneous EXPORT_SYMBOL* warnings

These are caused by checkpatch incorrectly parsing its internal
representation of a statement block for struct's (or anything else that is
a statement block encapsulated in {}'s that also ends with a ';').  Fix
this by properly parsing a statement block.

An example:

+struct dummy_type dummy = {
+ .foo = "baz",
+};
+EXPORT_SYMBOL_GPL(dummy);
+
+static int dummy_func(void)
+{
+ return -EDUMMYCODE;
+}
+EXPORT_SYMBOL_GPL(dummy_func);

WARNING: EXPORT_SYMBOL(foo); should immediately \
follow its function/variable
#19: FILE: dummy.c:4:
+EXPORT_SYMBOL_GPL(dummy);

The above warning is issued when it should not be.

Signed-off-by: Patrick Pannuto <ppannuto@codeaurora.org>
Cc: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

checkpatch: warn about unexpectedly long msleep's

As explained in Documentation/timers/timers-howto.txt, msleep's of < 20ms
may sleep for as long as 20ms.  Caller's of msleep(1) or msleep(2), etc
are likely not to expect this quirky behavior - warn them.

Signed-off-by: Patrick Pannuto <ppannuto@codeaurora.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

checkpatch: prefer usleep_range over udelay

When possible, sleeping is (usually) better than delaying; however, don't
bother callers of udelay < 10us, as those cases are generally not worth
the switch to usleep

[akpm@linux-foundation.org: fix mismatched parentheses]
Signed-off-by: Patrick Pannuto <ppannuto@codeaurora.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

checkpatch: add more exceptions to 80 char lines

Add new logging functions netdev_<level> and netif_<level>.
Don't complain if the only thing on a line is a quoted string.

Signed-off-by: Joe Perches <joe@perches.com>
Cc: Andy Whitcroft <apw@shadowen.org>
Cc: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

checkpatch: change externals to globals

Make error message say 'ERROR: do not initialise globals to 0 or NULL'
rather than 'ERROR: do not initialise externals to 0 or NULL'.  Makes more
sense in the context since there is an extern keyword in C and that is a
global declaration within the scope of the current file.

Signed-off-by: Joe Eloff <kagen101@gmail.com>
Cc: Andy Whitcroft <apw@shadowen.org>
Cc: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

checkpatch: fix handling of leading spaces

I've got a false positive when spaces are present at the beginning of a
line.

So I add this check, obviously excluding to check the lines in the middle of
comments.

For instance this code passes the checkpatch test:

+struct davinci_mcbsp_data {
+       unsigned int    fmt;
+    int             clk_div;
+};
+
+static struct davinci_mcbsp_data mcbsp_data;

Where, before the string "int             clk_div", I have 4 spaces (\040
ascii character).

With v2.6.34 scripts/checkpatch.pl script I get:

scripts/checkpatch.pl 0001-ASoC-DaVinci-Added-support-for-stereo-I2S.patch
total: 0 errors, 0 warnings, 201 lines checked
0001-ASoC-DaVinci-Added-support-for-stereo-I2S.patch has no obvious style
problems and is ready for submission.

That is not correct.  Instead with the proposed patch I get:

scripts/checkpatch.pl 0001-ASoC-DaVinci-Added-support-for-stereo-I2S.patch
WARNING: please, no space for starting a line,
                excluding comments
#63: FILE: sound/soc/davinci/davinci-i2s.c:165:
+    int             clk_div;$

WARNING: please, no space for starting a line,
                excluding comments
#95: FILE: sound/soc/davinci/davinci-i2s.c:406:
+    return 0;$

total: 0 errors, 2 warnings, 201 lines checked

That is correct.

Signed-off-by: Raffaele Recalcati <raffaele.recalcati@bticino.it>
Cc: Wolfram Sang <w.sang@pengutronix.de>
Cc: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

checkpatch: refactor 'allowed asm includes' and add memory.h

Change the check suggesting replacement of asm-includes with
linux-includes.  Exceptions to this rule are easier to extend now.  Add
memory.h because ARM has a custom one.

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

edd: fix possible memory leak in edd_init() error path

The error may happen at any iteration of the for loop, this patch properly
unregisters already registed edd_devices in error path.

[akpm@linux-foundation.org: remove unneeded NULL test]
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Cc: Stephen Hemminger <shemminger@vyatta.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

flex_array: add helpers to get and put to make pointers easy to use

Getting and putting arrays of pointers with flex arrays is a PITA.  You
have to remember to pass &ptr to the _put and you have to do weird and
wacky casting to get the ptr back from the _get.  Add two functions
flex_array_get_ptr() and flex_array_put_ptr() to handle all of the magic.

[akpm@linux-foundation.org: simplification suggested by Joe]
Signed-off-by: Eric Paris <eparis@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Dave Hansen <dave@linux.vnet.ibm.com>
Cc: Joe Perches <joe@perches.com>
Cc: James Morris <jmorris@namei.org>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib: vsprintf: useless strlen() removed

The strict_strtoul() and strict_strtoull() functions used strlen() to
check argument's length in a situation where it wasn't strictly necessary

Signed-off-by: Michal Nazarewicz <mina86@mina86.com>
Cc: "Yi Yang" <yi.y.yang@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

list debugging: warn when deleting a deleted entry

Use the magic LIST_POISON* values to detect an incorrect use of list_del
on a deleted entry.  This DEBUG_LIST specific warning is easier to
understand than the generic Oops message caused by LIST_POISON
dereference.

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Cc: Dave Jones <davej@codemonkey.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

MAINTAINERS: orphan BEFS

This old address bounces and Sergey doesn't answer at another email
address.

Signed-off-by: Joe Perches <joe@perches.com>
Cc: Sergey Kostyliov <rathamahata@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

MAINTAINERS: update Laurent Pinchart email

Laurent is sending auto-replies with a new email address, so might as well
update MAINTAINERS.

Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

MAINTAINERS: update information about Linux Test Project maintainence

Signed-off-by: Subrata Modak <subrata@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

MAINTAINERS: add patterns to WIMAX STACK

Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

MAINTAINERS: add patterns to PS3VRAM DRIVER

Signed-off-by: Joe Perches <joe@perches.com>
Cc: Jim Paris <jim@jtan.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

MAINTAINERS: remove section PROMISE DC4030

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

MAINTAINERS: add patterns to OMAP USB

Signed-off-by: Joe Perches <joe@perches.com>
Cc: Felipe Balbi <felipe.balbi@nokia.com>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

MAINTAINERS: add patterns to POWERPC EMBEDDED PPC8XX

Signed-off-by: Joe Perches <joe@perches.com>
Cc: Vitaly Bordug <vitb@kernel.crashing.org>
Cc: Marcelo Tosatti <marcelo@kvack.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

MAINTAINERS: add patterns to DELL WMI EXTRAS

Signed-off-by: Joe Perches <joe@perches.com>
Cc: Matthew Garrett <mjg59@srcf.ucam.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

MAINTAINERS: add patterns to CRYPTOGRAPHIC RANDOM NUMBER GENERATOR

Signed-off-by: Joe Perches <joe@perches.com>
Cc: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

MAINTAINERS: update DRM DRIVERS patterns

Signed-off-by: Joe Perches <joe@perches.com>
Cc: David Airlie <airlied@linux.ie>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

MAINTAINERS: add file patterns to UCLINUX FOR RENESAS H8/300

Signed-off-by: Joe Perches <joe@perches.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

MAINTAINERS: remove section STRIP

Commit f80a3f62383bf673c310926d55142d51f118926d ("Staging: strip: delete
the driver") removed it.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

MAINTAINERS: update SPEAR CLOCK FRAMEWORK SUPPORT file patterns

Signed-off-by: Joe Perches <joe@perches.com>
Cc: Viresh Kumar <viresh.kumar@st.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

MAINTAINERS: remove section SMX UIO Interface

Commit d6e976c0d258c9547a308bd8a9a82ec93e2bc6e2 ("UIO: Remove SMX
Cryptengine driver") removed the file.

Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Ben Nizette <bn@niasdigital.com>
Acked-by: Hans J. Koch <hjk@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

MAINTAINERS: update RICOH SMARTMEDIA/XD DRIVER file patterns

Entered as 822 (10 key typo?).

Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Maxim Levitsky <maximlevitsky@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

MAINTAINERS: update PPP OVER L2TP file patterns

Commit 21b4aaa14329db793832e865f15000c5c0192ac3 ("l2tp: Relocate pppol2tp
driver to new net/l2tp directory") moved the file.

Signed-off-by: Joe Perches <joe@perches.com>
Cc: James Chapman <jchapman@katalix.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

MAINTAINERS: update NETWORKING [WIRELESS] file patterns

Signed-off-by: Joe Perches <joe@perches.com>
Cc: "John W. Linville" <linville@tuxdriver.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

MAINTAINERS: update ARM/ZIPIT Z2 SUPPORT file patterns

Use correct file location.

Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

MAINTAINERS: update ARM/VOIPAC PXA270 file patterns

Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

MAINTAINERS: update ARM/NUVOTON W90X900 ARM ARCHITECTURE file patterns

Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Wan ZongShun <mcuos.com@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

MAINTAINERS: update ARM/BCMRING MTD NAND DRIVER file patterns

Signed-off-by: Joe Perches <joe@perches.com>
Cc: Leo Chen <leochen@broadcom.com>
Cc: Scott Branden <sbranden@broadcom.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

gcc-4.6: printk: use stable variable to dump kmsg buffer

kmsg_dump takes care to sample the global variables
inside a spinlock, but then goes on to use the same
variables outside the spinlock region too.

Use the correct variable. This will make the race
window smaller.

Found by gcc 4.6's new warnings.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

s390: remove WARN_ON for misc_deregister() failures

The previous change added WARN_ON() in misc_deregister().  So it is not
necessary to WARN_ON() misc_deregister() failure by callers.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

char: add WARN_ON() in misc_deregister()

misc_deregister() returns an error only when it attempts to unregister
the device that is not registered. This is the driver's bug.

Most of the drivers don't check the return value of misc_deregister().
(It is not bad thing because most of kernel *_unregister() API always
succeed and do not return value)

So it is better to indicate the error by WARN_ON() in misc_deregister().

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

stop_machine: struct cpu_stopper, remove alignment padding on 64 bits

Reorder elements in structure cpu_stopper to remove alignment padding on
64 bit builds, this shrinks its size from 40 to 32 bytes saving 8 bytes
per cpu.

Signed-off-by: Richard Kennedy <richard@rsk.demon.co.uk>
Acked-by: Tejun Heo <tj@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

x86, ia64, smp: use workqueues unconditionally during do_boot_cpu()

Workqueues are now initialized as part of the early_initcall().  So they
are available for use during cold boot process aswell.

Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tejun Heo <tj@kernel.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Tony Luck <tony.luck@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

init/main.c: mark do_one_initcall* as __init_or_module

Andrew Morton suggested that the do_one_initcall and do_one_initcall_debug
functions can be marked __init_or_module such that they can be discarded
for the CONFIG_MODULES=N case.

Signed-off-by: Kevin Winchester <kjwinchester@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

init/main.c: fix warning: 'calltime.tv64' may be used uninitialized

Using:

gcc (GCC) 4.5.0 20100610 (prerelease)

The following warning appears:

init/main.c: In function `do_one_initcall':
init/main.c:730:10: warning: `calltime.tv64' may be used uninitialized in this function

This warning is actually correct, as the global initcall_debug could
arguably be changed by the initcall.

Correct this warning by extracting a new function, do_one_initcall_debug,
that performs the initcall for the debug case.

Signed-off-by: Kevin Winchester <kjwinchester@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kernel/range: remove unused definition of ARRAY_SIZE()

Remove duplicate definition of ARRAY_SIZE(), which was never used anyway.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

sys_personality: remove the bogus checks in sys_personality()->__set_personality() path

Cleanup, no functional changes.

- __set_personality() always changes ->exec_domain/personality, the
  special case when ->exec_domain remains the same buys nothing but
  complicates the code. Unify both cases to simplify the code.

- The -EINVAL check in sys_personality() was never right. If we assume
  that set_personality() can fail we should check the value it returns
  instead of verifying that task->personality was actually changed.

  Remove it. Before the previous patch it was possible to hit this case
  due to overflow problems, but this -EINVAL just indicated the kernel
  bug.

OTOH, probably it makes sense to change lookup_exec_domain() to return
ERR_PTR() instead of default_exec_domain if the search in exec_domains
list fails, and report this error to the user-space.  But this means
another user-space change, and we have in-kernel users which need fixes.
For example, PER_OSF4 falls into PER_MASK for unkown reason and nobody
cares to register this domain.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Wenming Zhang <wezhang@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/misc: support for the pressure sensor BMP085 from Bosch Sensortec

This driver adds support for the BMP085 digital pressure sensor from Bosch
Sensortec.  It exposes a sysfs api to userspace where pressure and
temperature measurement results can be read from the pressure0_input and
temp0_input file.  The chip is able to calculate the average of up to
eight samples to increase the accuracy.  This feature can be controlled by
writing to the oversampling file.

The BMP085 digital pressure sensor can measure ambient air pressure and
temperature.  Both values can be obtained from sysfs files.  The pressure
is measured by reading from pressure0_input.  Valid values range from
30000 to 110000 pascal with a resolution of 1 pascal (=0.01 millibar).

temp0_input holds the current temperature in degree celsius, multiplied by
10.  This results in a resolution of a tenth degree celsius.  Values range
from -400 to 850.

To increase the accuracy, this chip can calculate the average of 1, 2, 4
or 8 samples.  This behavior is controlled through the oversampling sysfs
file.  Two to the power of the value written to that file specifies how
many samples will be used.  Valid values: 0..3.

[akpm@linux-foundation.org: fix typo]
[shubhrajyoti@ti.com: optimize the wait time for the pressure sensor, definition of long is arch dependent so make it u32]
[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Christoph Mair <christoph.mair@gmail.com>
Signed-off-by: Shubhrajyoti D <shubhrajyoti@ti.com>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Cc: Stefan Schmidt <stefan@datenfreihafen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>