GitHub/LineageOS/android_kernel_samsung_universal7580.git
19 years ago[PATCH] ppc64: cleanup iseries runlight support
Anton Blanchard [Thu, 2 Jun 2005 21:02:02 +0000 (14:02 -0700)]
[PATCH] ppc64: cleanup iseries runlight support

The iseries has a bar graph on the front panel that shows how busy it is.
The operating system sets and clears a bit in the CTRL register to control
it.

Instead of going to the complexity of using a thread info bit, just set and
clear it in the idle loop.

Also create two helper functions, ppc64_runlatch_on and ppc64_runlatch_off.

Finally don't use the short form of the SPR defines.

Signed-off-by: Anton Blanchard <anton@samba.org>
Acked-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] ppc64: cleanup SPR definitions
Anton Blanchard [Thu, 2 Jun 2005 21:02:02 +0000 (14:02 -0700)]
[PATCH] ppc64: cleanup SPR definitions

There are a bunch of irrelevant SPR definitions in asm/processer.h.  Cut
them down a bit, also add a DABR_TRANSLATION define which will be used
shortly.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] ext3: fix list scanning in __cleanup_transaction
Jan Kara [Thu, 2 Jun 2005 21:02:01 +0000 (14:02 -0700)]
[PATCH] ext3: fix list scanning in __cleanup_transaction

Fix a bug in list scanning that can cause us to skip the last buffer on the
checkpoint list (and hence fail to do any progress under some rather
unfavorable conditions).

The problem is we first do jh=next_jh and then test

} while (jh!=last_jh);

Hence we skip the last buffer on the list (if it was not the only buffer on
the list).  As we already do jh=next_jh; in the beginning of the loop we
are safe to just remove the assignment in the end.  It can happen that 'jh'
will be freed at the point we test jh != last_jh but that does not matter
as we never *dereference* the pointer.

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] ext3: fix log_do_checkpoint() assertion failure
Jan Kara [Thu, 2 Jun 2005 21:02:00 +0000 (14:02 -0700)]
[PATCH] ext3: fix log_do_checkpoint() assertion failure

Fix possible false assertion failure in log_do_checkpoint().  We might fail
to detect that we actually made a progress when cleaning up the checkpoint
lists if we don't retry after writing something to disk.  The patch was
confirmed to fix observed assertion failures for several users.

When we flushed some buffers we need to retry scanning the list.
Otherwise we can fail to detect our progress.

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] ppc64: Fix result code handling in prom_init
Benjamin Herrenschmidt [Thu, 2 Jun 2005 04:11:37 +0000 (14:11 +1000)]
[PATCH] ppc64: Fix result code handling in prom_init

prom_init(), the trampoline code that "talks" to Open Firmware during
early boot, has various issues with managing OF result codes. Some of my
recent fixups in fact made the problem worse on some platforms.

This patch reworks it all. Tested on g5, Maple, POWER3 and POWER5.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years agoMerge of master.kernel.org:/pub/scm/linux/kernel/git/aegl/linux-2.6
Linus Torvalds [Thu, 2 Jun 2005 02:17:59 +0000 (19:17 -0700)]
Merge ... /pub/scm/linux/kernel/git/aegl/linux-2.6

19 years agoAutomatic merge of rsync://rsync.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6
Linus Torvalds [Wed, 1 Jun 2005 23:32:03 +0000 (16:32 -0700)]
Merge ... /linux/kernel/git/sfrench/cifs-2.6

19 years ago[IA64] fix compilation warning in sys32_epoll_wait()
Peter Chubb [Wed, 1 Jun 2005 05:37:00 +0000 (22:37 -0700)]
[IA64] fix compilation warning in sys32_epoll_wait()

This gets rid of an unused variable `error' in sys_ia32.c:sys32_epoll_wait()

Getting rid of this one makes parsing the output of the kernecomp
autobuild easier --- searching for `Error' to find a problem kept
hitting this one, even though it's only a warning.

Signed-off-by: Tony Luck <tony.luck@intel.com>
19 years ago[IA64] Cleanup compile warnings for ski config
Peter Chubb [Wed, 1 Jun 2005 05:34:00 +0000 (22:34 -0700)]
[IA64] Cleanup compile warnings for ski config

The attached patch cleans up a compilation warning when ACPI
is turned off (i.e., when compiling for the Ski simulator).

Signed-off-by: Tony Luck <tony.luck@intel.com>
19 years agoAutomatic merge of rsync://rsync.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6
Linus Torvalds [Wed, 1 Jun 2005 20:21:58 +0000 (13:21 -0700)]
Merge ... /pub/scm/linux/kernel/git/davem/net-2.6

19 years agoAutomatic merge of rsync://rsync.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6
Linus Torvalds [Wed, 1 Jun 2005 20:20:35 +0000 (13:20 -0700)]
Merge ... /linux/kernel/git/davem/sparc-2.6

19 years agoAutomatic merge of rsync://rsync.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6
Linus Torvalds [Wed, 1 Jun 2005 14:56:33 +0000 (07:56 -0700)]
Merge ... /pub/scm/linux/kernel/git/gregkh/usb-2.6

19 years agoAutomatic merge of rsync://rsync.kernel.org/pub/scm/linux/kernel/git/gregkh/i2c-2.6
Linus Torvalds [Wed, 1 Jun 2005 14:56:10 +0000 (07:56 -0700)]
Merge ... /pub/scm/linux/kernel/git/gregkh/i2c-2.6

19 years agoAutomatic merge of rsync://rsync.kernel.org/pub/scm/linux/kernel/git/gregkh/pci-2.6
Linus Torvalds [Wed, 1 Jun 2005 14:55:46 +0000 (07:55 -0700)]
Merge ... /pub/scm/linux/kernel/git/gregkh/pci-2.6

19 years ago[PATCH] ppc32/ppc64: cleanup /proc/device-tree
Benjamin Herrenschmidt [Wed, 1 Jun 2005 07:07:27 +0000 (17:07 +1000)]
[PATCH] ppc32/ppc64: cleanup /proc/device-tree

This cleans up the /proc/device-tree representation of the Open Firmware
device-tree on ppc and ppc64.  It does the following things:

 - Workaround an issue in some Apple device-trees where a property may
   exist with the same name as a child node of the parent.  We now
   simply "drop" the property instead of creating duplicate entries in
   /proc with random result...

 - Do not try to chop off the "@0" at the end of a node name whose unit
   address is 0.  This is not useful, inconsistent, and the code was
   buggy and didn't always work anyway.

 - Do not create symlinks for the short name and unit address parts of a
   node.  These were never really used, bloated the memory footprint of
   the device-tree with useless struct proc_dir_entry and their matching
   dentry and inode cache bloat.

This results in smaller code, smaller memory footprint, and a more
accurate view of the tree presented to userland.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] ppc32: Apple device-tree bug fix
Benjamin Herrenschmidt [Wed, 1 Jun 2005 07:02:22 +0000 (17:02 +1000)]
[PATCH] ppc32: Apple device-tree bug fix

This is the ppc32 patch equivalent to the just posted ppc64 one working
around a bug in Apple device-trees regarding the "cpus" nodes.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] ppc64: Fix a device-tree bug on Apple's
Benjamin Herrenschmidt [Wed, 1 Jun 2005 04:54:25 +0000 (14:54 +1000)]
[PATCH] ppc64: Fix a device-tree bug on Apple's

Apple's Open Firmware has a funny bug when creating the /cpus nodes
where it leaves a dangling '\0' character in the CPU name which ends up
appearing in the full path of the node. This is bogus and
confuses /proc/device-tree badly.

This patch strips those bogus zero's from the node full path when
reading the device-tree from Open Firmware. The "name" property is not
modified and still contains the spurrious 0 (it basically contains 0
tailing 0 instead of one) but that shouldn't be a problem.

An equivalent patch for ppc32 will follow shortly

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[SPARC64]: Refine PCI strbuf ctx-based flush.
David S. Miller [Wed, 1 Jun 2005 02:13:52 +0000 (19:13 -0700)]
[SPARC64]: Refine PCI strbuf ctx-based flush.

The initial peek read PIO of the match register is just a waste.
Just do the flush writes first, as that is more efficient.

Signed-off-by: David S. Miller <davem@davemloft.net>
19 years ago[PATCH] cpufreq-stats driver documentation
Venkatesh Pallipadi [Wed, 25 May 2005 21:43:56 +0000 (14:43 -0700)]
[PATCH] cpufreq-stats driver documentation

Documentation for cpufreq stats.

Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Dave Jones <davej@redhat.com>
19 years ago[PATCH] cpufreq-stats driver updates
Venkatesh Pallipadi [Wed, 25 May 2005 21:46:50 +0000 (14:46 -0700)]
[PATCH] cpufreq-stats driver updates

Changes to the cpufreq stats driver:
* Changes the way P-state transition table looks in /sysfs providing more
  clear output
* Changes the time unit in the output from HZ to clock_t

Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Dave Jones <davej@redhat.com>
19 years ago[CPUFREQ] Typos.
Dave Jones [Wed, 1 Jun 2005 02:03:52 +0000 (19:03 -0700)]
[CPUFREQ] Typos.

cpfureq developers cant spel.

Signed-off-by: Dave Jones <davej@redhat.com>
19 years ago[CPUFREQ] longhaul - adjust transition latency.
Dave Jones [Wed, 1 Jun 2005 02:03:51 +0000 (19:03 -0700)]
[CPUFREQ] longhaul - adjust transition latency.

From patch by: Ken Staton <ken_staton@agilent.com>
Signed-off-by: Dave Jones <davej@redhat.com>
19 years ago[CPUFREQ] Longhaul: Magic timer frobbing.
Dave Jones [Wed, 1 Jun 2005 02:03:51 +0000 (19:03 -0700)]
[CPUFREQ] Longhaul: Magic timer frobbing.

As mandated by the spec, disable timer around transitions.

From code by : Ken Staton <ken_staton@agilent.com
Signed-off-by: Dave Jones <davej@redhat.com>
19 years ago[CPUFREQ] longhaul - disable PCI mastering around transition.
Dave Jones [Wed, 1 Jun 2005 02:03:51 +0000 (19:03 -0700)]
[CPUFREQ] longhaul - disable PCI mastering around transition.

The spec states that we have to do this, which is *horrid*.

Based on code from: Ken Staton <ken_staton@agilent.com>
Signed-off-by: Dave Jones <davej@redhat.com>
19 years ago[CPUFREQ] ondemand governor default sampling downfactor as 1
Dave Jones [Wed, 1 Jun 2005 02:03:50 +0000 (19:03 -0700)]
[CPUFREQ] ondemand governor default sampling downfactor as 1

[PATCH] [5/5] ondemand governor default sampling downfactor as 1

Make default sampling downfactor 1.
This works better with earlier auto downscaling change in ondemand governor.

Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Dave Jones <davej@redhat.com>
19 years ago[CPUFREQ] ondemand governor automatic downscaling
Dave Jones [Wed, 1 Jun 2005 02:03:50 +0000 (19:03 -0700)]
[CPUFREQ] ondemand governor automatic downscaling

[PATCH] [4/5] ondemand governor automatic downscaling

Here is a change of policy for the ondemand governor. The modification
concerns the frequency downscaling. Instead of decreasing to a lower
frequency when the CPU usage is under 20%, this new policy automatically
scales to the optimal frequency. The optimal frequency being the lowest
frequency which provides enough power to not trigger the upscaling policy.

Signed-off-by: Eric Piel <eric.piel@tremplin-utc.net>
Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Dave Jones <davej@redhat.com>
19 years ago[CPUFREQ] ondemand,conservative governor idle_tick clean-up
Dave Jones [Wed, 1 Jun 2005 02:03:49 +0000 (19:03 -0700)]
[CPUFREQ] ondemand,conservative governor idle_tick clean-up

[PATCH] [3/5] ondemand,conservative governor idle_tick clean-up

Ondemand and conservative governor clean-up, it factorises the idle ticks
measurement.

Signed-off-by: Eric Piel <eric.piel@tremplin-utc.net>
Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Dave Jones <davej@redhat.com>
19 years ago[CPUFREQ] ondemand,conservative governor store the idle ticks for all cpus
Dave Jones [Wed, 1 Jun 2005 02:03:49 +0000 (19:03 -0700)]
[CPUFREQ] ondemand,conservative governor store the idle ticks for all cpus

[PATCH] [2/5] ondemand,conservative governor store the idle ticks for all cpus

Ondemand, conservative governor did not store prev_cpu_idle_up into
prev_cpu_idle_down for other CPUs than the current CPU.

Signed-off-by: Eric Piel <eric.piel@tremplin-utc.net>
Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Dave Jones <davej@redhat.com>
19 years ago[CPUFREQ] ondemand,conservative minor bug-fix and cleanup
Dave Jones [Wed, 1 Jun 2005 02:03:49 +0000 (19:03 -0700)]
[CPUFREQ] ondemand,conservative minor bug-fix and cleanup

[PATCH] [1/5] ondemand,conservative minor bug-fix and cleanup

Attached patch fixes some minor issues with Alexander's patch and related
cleanup in both ondemand and conservative governor.

Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Dave Jones <davej@redhat.com>
19 years ago[CPUFREQ] Allow ondemand stepping to be changed by user.
Dave Jones [Wed, 1 Jun 2005 02:03:48 +0000 (19:03 -0700)]
[CPUFREQ] Allow ondemand stepping to be changed by user.

Adds support so that the cpufreq change stepping is no longer fixed at 5% and
can be changed dynamically by the user

Signed-off-by: Alexander Clouter <alex-kernel@digriz.org.uk>
Signed-off-by: Dave Jones <davej@redhat.com>
19 years ago[CPUFREQ] Prevents un-necessary cpufreq changes if we are already at min/max
Dave Jones [Wed, 1 Jun 2005 02:03:48 +0000 (19:03 -0700)]
[CPUFREQ] Prevents un-necessary cpufreq changes if we are already at min/max

Signed-off-by: Alexander Clouter <alex-kernel@digriz.org.uk>
Signed-off-by: Dave Jones <davej@redhat.com>
19 years ago[CPUFREQ] Add support to cpufreq_ondemand to ignore 'nice' cpu time
Dave Jones [Wed, 1 Jun 2005 02:03:47 +0000 (19:03 -0700)]
[CPUFREQ] Add support to cpufreq_ondemand to ignore 'nice' cpu time

Signed-off-by: Alexander Clouter <alex-kernel@digriz.org.uk>
Signed-off-by: Dave Jones <davej@redhat.com>
19 years ago[CPUFREQ] Conservative cpufreq governer
Dave Jones [Wed, 1 Jun 2005 02:03:47 +0000 (19:03 -0700)]
[CPUFREQ] Conservative cpufreq governer

A new cpufreq module, based on the ondemand one with my additional patches
just posted.  This one is more suitable for battery environments where its
probably more appealing to have the cpu freq gracefully increase and decrease
rather than flip between the min and max freq's.

N.B. Bruno Ducrot pointed out that the amd64's "do have unacceptable latency
between min and max freq transition, due to the step-by-step requirements
(200MHz IIRC)"; so AMD64 users would probably benefit from this too.

Signed-off-by: Alexander Clouter <alex-kernel@digriz.org.uk>
Signed-off-by: Dave Jones <davej@redhat.com>
19 years ago[CPUFREQ] fix up comment in cpufreq.h
Dave Jones [Wed, 1 Jun 2005 02:03:47 +0000 (19:03 -0700)]
[CPUFREQ] fix up comment in cpufreq.h

Fix up comment in cpufreq.h stating transition latency should be passed
in microseconds -- it was decided long ago to switch to nanoseconds.

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Dave Jones <davej@redhat.com>
19 years ago[CPUFREQ] dual-core powernow-k8
Dave Jones [Wed, 1 Jun 2005 02:03:46 +0000 (19:03 -0700)]
[CPUFREQ] dual-core powernow-k8

With the release of the dual-core AMD Opterons last week,
it's high time that cpufreq supported them.  The attached
patch applies cleanly to 2.6.12-rc3 and updates powernow-k8
to support the latest Athlon 64 and Opteron processors.

Update the driver to version 1.40.0 and provide support
for dual-core processors.

Signed-off-by: Mark Langsdorf <mark.langsdorf@amd.com>
Signed-off-by: Dave Jones <davej@redhat.com>
19 years ago[CPUFREQ] make cpufreq_gov_dbs static
Dave Jones [Wed, 1 Jun 2005 02:03:46 +0000 (19:03 -0700)]
[CPUFREQ] make cpufreq_gov_dbs static

This patch makes a needlessly global and EXPORT_SYMBOL'ed struct static.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Dave Jones <davej@redhat.com>
19 years ago[CPUFREQ] Recalibrate cpu_khz [2/2]
Dave Jones [Wed, 1 Jun 2005 02:03:46 +0000 (19:03 -0700)]
[CPUFREQ] Recalibrate cpu_khz [2/2]

Some cpufreq drivers (at that time, only powernow-k7) need to recalibrate the
cpu_khz at runtime.

Signed-off-by: Bruno Ducrot <ducrot@poupinou.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Dave Jones <davej@redhat.com>
19 years ago[CPUFREQ] Recalibrate cpu_khz [1/2]
Dave Jones [Wed, 1 Jun 2005 02:03:45 +0000 (19:03 -0700)]
[CPUFREQ] Recalibrate cpu_khz [1/2]

We have to recalibrate cpu_khz in order to use the current FID instead the max
FID since some BIOS do not put the processor at maximum frequency at POST.
Also, some BIOS will change the processor frequency at our back after cpu_khz
was calibrate.  Finally, this will fix a long standing bug when we do
something like this:

# rmmod powernow-k7
# modprobe powernow-k7

Signed-off-by: Bruno Ducrot <ducrot@poupinou.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Dave Jones <davej@redhat.com>
19 years ago[CPUFREQ] AMD Elan SC520 cpufreq driver.
Dave Jones [Wed, 1 Jun 2005 02:03:45 +0000 (19:03 -0700)]
[CPUFREQ] AMD Elan SC520 cpufreq driver.

From: Sean Young <sean@mess.org>
Signed-off-by: Dave Jones <davej@redhat.com>
19 years ago[CPUFREQ] Add warning comment about default governors.
Dave Jones [Wed, 1 Jun 2005 02:03:44 +0000 (19:03 -0700)]
[CPUFREQ] Add warning comment about default governors.

This comes up time and time again. Until its fixed, place this
comment in the Kconfig which should stem the flow of resubmissions.

Signed-off-by: Rob Weryk <rjweryk@uwo.ca>
Signed-off-by: Dave Jones <davej@redhat.com>
19 years ago[CPUFREQ] speedstep-smi: it works on at least one P4M
Dave Jones [Wed, 1 Jun 2005 02:03:44 +0000 (19:03 -0700)]
[CPUFREQ] speedstep-smi: it works on at least one P4M

The speedstep-smi driver actually works on >=1 notebook with a
Pentium 4-M CPU where all other cpufreq drivers fail. Therefore,
allow speedstep-smi on P4Ms again, but warn users of likely failure

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Dave Jones <davej@redhat.com>
19 years ago[CPUFREQ] ondemand: trivial clean-ups
Dave Jones [Wed, 1 Jun 2005 02:03:44 +0000 (19:03 -0700)]
[CPUFREQ] ondemand: trivial clean-ups

Trivial ondemand governor clean-ups:
- change from sampling_rate_in_HZ() to the official function
usecs_to_jiffies().
- use for_each_online_cpu() to instead of using "if (cpu_online(i))"

Signed-off-by: Eric Piel <eric.piel@tremplin-utc.net>
Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Dave Jones <davej@redhat.com>
19 years ago[CPUFREQ] speedstep-centrino: Pentium 4 - M (HT) support
Dave Jones [Wed, 1 Jun 2005 02:03:43 +0000 (19:03 -0700)]
[CPUFREQ] speedstep-centrino: Pentium 4 - M (HT) support

The Pentium 4 - Ms (HT) with CPUID 0xF34 and 0xF41 seem to support
centrino-like enhanced speedstep; however, no "table" support is possible.
Therefore, put NULL entries into speedstep-centrino.c

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Dave Jones <davej@redhat.com>
19 years ago[CPUFREQ] cpufreq-core: reduce warning messages.
Dave Jones [Wed, 1 Jun 2005 02:03:43 +0000 (19:03 -0700)]
[CPUFREQ] cpufreq-core: reduce warning messages.

cpufreq core is printing out messages at KERN_WARNING level that the core
recovers from without intervention, and that the system administrator can
do nothing about.  Patch below reduces the severity of these messages to
debug.

Signed-off-by: Matt Domsch <Matt_Domsch@dell.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Dave Jones <davej@redhat.com>
19 years ago[CPUFREQ] powernow-k7: don't print khz element of FSB.
Dave Jones [Wed, 1 Jun 2005 02:03:42 +0000 (19:03 -0700)]
[CPUFREQ] powernow-k7: don't print khz element of FSB.

Signed-off-by: Dave Jones <davej@redhat.com>
19 years ago[IPSEC]: Fix esp_decap_data size verification in esp4.
Edgar E Iglesias [Wed, 1 Jun 2005 00:08:05 +0000 (17:08 -0700)]
[IPSEC]: Fix esp_decap_data size verification in esp4.

Signed-off-by: Edgar E Iglesias <edgar@axis.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
19 years ago[SPARC64]: Fix streaming buffer flushing on PCI and SBUS.
David S. Miller [Tue, 31 May 2005 23:57:59 +0000 (16:57 -0700)]
[SPARC64]: Fix streaming buffer flushing on PCI and SBUS.

Firstly, if the direction is TODEVICE, then dirty data in the
streaming cache is impossible so we can elide the flush-flag
synchronization in that case.

Next, the context allocator is broken.  It is highly likely
that contexts get used multiple times for different dma
mappings, which confuses the strbuf flushing code and makes
it run inefficiently.

Signed-off-by: David S. Miller <davem@davemloft.net>
19 years ago[PKT_SCHED]: Disable dsmark debugging messages by default
Thomas Graf [Tue, 31 May 2005 22:17:28 +0000 (15:17 -0700)]
[PKT_SCHED]: Disable dsmark debugging messages by default

Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
19 years ago[PKT_SCHED]: make dsmark try using pfifo instead of noop while grafting
Thomas Graf [Tue, 31 May 2005 22:16:52 +0000 (15:16 -0700)]
[PKT_SCHED]: make dsmark try using pfifo instead of noop while grafting

Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
19 years ago[PKT_SCHED]: Fix dsmark to count ignored indices while walking
Thomas Graf [Tue, 31 May 2005 22:15:58 +0000 (15:15 -0700)]
[PKT_SCHED]: Fix dsmark to count ignored indices while walking

Unused indices which are ignored while walking must still
be counted to avoid dumping the same index twice.

Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
19 years ago[PATCH] UDF filesystem: array '__mon_yday' declared as not static
Goffredo Baroncelli [Tue, 31 May 2005 21:39:31 +0000 (14:39 -0700)]
[PATCH] UDF filesystem: array '__mon_yday' declared as not static

in fs/udf/udftime.c the global array '__mon_yday' is not static, and it
conflicts with the glibc one when the kernel is compiled as user mode.

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] pcdp.c build fix
Peter Chubb [Tue, 31 May 2005 21:39:30 +0000 (14:39 -0700)]
[PATCH] pcdp.c build fix

In file included from drivers/firmware/pcdp.c:18:
drivers/firmware/pcdp.h:48: error: field `addr' has incomplete type
drivers/firmware/pcdp.c: In function `setup_serial_console':
drivers/firmware/pcdp.c:27: error:  `ACPI_ADR_SPACE_SYSTEM_MEMORY' undeclared (first use in this  function)

Cc: <tony.luck@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] flush icache in correct context
Roman Zippel [Tue, 31 May 2005 21:39:29 +0000 (14:39 -0700)]
[PATCH] flush icache in correct context

flush_icache_range() is used in two different situation - in binfmt_elf.c &
co for user space mappings and module.c for kernel modules.  On m68k
flush_icache_range() doesn't know which data to flush, as it has separate
address spaces and the pointer argument can be valid in either address
space.

First I considered splitting flush_icache_range(), but this patch is
simpler.  Setting the correct context gives flush_icache_range() enough
information to flush the correct data.

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] ppc64: allow timer based profiling on iseries
Anton Blanchard [Tue, 31 May 2005 21:39:29 +0000 (14:39 -0700)]
[PATCH] ppc64: allow timer based profiling on iseries

We used to have an iseries specific profiler that used /proc/profile.  Now
thats gone we can use the generic timer based stuff.

Signed-off-by: Anton Blanchard <anton@samba.org>
Acked-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] h8300 sleep problem
Nick Piggin [Tue, 31 May 2005 21:39:28 +0000 (14:39 -0700)]
[PATCH] h8300 sleep problem

h8300 appears to sleep (halt) when need_resched IS set.

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] acpi build fix: x86 setup.c
Alexander Nyberg [Tue, 31 May 2005 21:39:27 +0000 (14:39 -0700)]
[PATCH] acpi build fix: x86 setup.c

This is a neverending story

linux/acpi.h contains empty declarations for acpi_boot_init() &
acpi_boot_table_init() but they are nested inside #ifdef CONFIG_ACPI.

So we'll have to #ifdef in arch/i386/kernel/setup.c: setup_arch()

Signed-off-by: Alexander Nyberg <alexn@telia.com>
Cc: "Brown, Len" <len.brown@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] x86_64 CONFIG_ACPI=n build fix
Andi Kleen [Tue, 31 May 2005 21:39:26 +0000 (14:39 -0700)]
[PATCH] x86_64 CONFIG_ACPI=n build fix

Make CONFIG_X86_PM_TIMER dependent on CONFIG_ACPI

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] x86_64: More fixes for compilation without CONFIG_ACPI
Andi Kleen [Tue, 31 May 2005 21:39:26 +0000 (14:39 -0700)]
[PATCH] x86_64: More fixes for compilation without CONFIG_ACPI

Suggested by Alexander Nyberg

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] PCI Hotplug: more CPCI updates
Scott Murray [Fri, 27 May 2005 20:48:52 +0000 (16:48 -0400)]
[PATCH] PCI Hotplug: more CPCI updates

Here is my third attempt at a patch to further update the CompactPCI
hotplug driver infrastructure to address the pci_enable_device issue
discussed on the list as well as a few other issues I discovered during
some more testing.  This version addresses a few more issues pointed out
by Prarit Bhargava.  Changes include:
- cpci_enable_device and its recursive calling of pci_enable_device on
  new devices removed.
- Use list_rwsem to avoid slot status change races between disable_slot
  and check_slots.
- Fixed oopsing in cpci_hp_unregister_bus caused by calling list_del on
  a slot after calling pci_hp_deregister.
- Removed kfree calls in cleanup_slots since release_slot will have
  done it already.
- Reworked init_slots a bit to fix latch and adapter file updating on
  subsequent calls to cpci_hp_start.
- Improved sanity checking in cpci_hp_register_controller.
- Now shut things down correctly in cpci_hotplug_exit.
- Switch to pci_get_slot instead of deprecated pci_find_slot.
- A bunch of CodingStyle fixes.

Signed-off-by: Scott Murray <scottm@somanetworks.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
19 years ago[PATCH] PCI: amd74xx patch for new NVIDIA device IDs
Andy Currid [Mon, 23 May 2005 15:55:45 +0000 (08:55 -0700)]
[PATCH] PCI: amd74xx patch for new NVIDIA device IDs

Here's the 2.6 amd74xx patch for NVIDIA MCP51.

Signed-off-by: Andy Currid <acurrid@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
19 years ago[PATCH] PCI Hotplug: SHPCHP driver doesn't enable PERR and SERR properly
Kenji Kaneshige [Fri, 27 May 2005 07:08:14 +0000 (16:08 +0900)]
[PATCH] PCI Hotplug: SHPCHP driver doesn't enable PERR and SERR properly

Current shpchp driver doesn't seem to program command register to
enable PERR and SERR properly. The following patch fixes this issue.

Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
19 years ago[PATCH] PCI Hotplug: shpchp driver doesn't program _HPP values properly
Kenji Kaneshige [Mon, 23 May 2005 10:50:32 +0000 (19:50 +0900)]
[PATCH] PCI Hotplug: shpchp driver doesn't program _HPP values properly

Current shpchp driver doesn't seem to program _HPP values
properly. The following patch fixes this issue.

Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
19 years ago[PATCH] USB: fix usb-serial generic initialization
Greg Kroah-Hartman [Thu, 26 May 2005 12:55:55 +0000 (05:55 -0700)]
[PATCH] USB: fix usb-serial generic initialization

At module load time, if a generic device is found, the tty information
for the device is not set up properly (as the tty structures aren't initialized
yet.)  This can cause big problems for things like udev.  This patch fixes this.

Thanks to Kay Sievers for the original patch for this problem.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
19 years ago[PATCH] USB: ftdi_sio: new PID for ELV UM100
Ian Abbott [Tue, 17 May 2005 14:12:13 +0000 (15:12 +0100)]
[PATCH] USB: ftdi_sio: new PID for ELV UM100

ftdi_sio: Add PID for "ELV USB Module UM100".
PID sent by Armin Laugher.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
19 years ago[PATCH] USB: add sl811_cs support
David Brownell [Thu, 26 May 2005 12:55:55 +0000 (05:55 -0700)]
[PATCH] USB: add sl811_cs support

This adds support for a CF-card USB Host adapter, the Ratoc REX-CFU1U, by
wrapping a PCMCIA driver around the existing "sl811-hcd" platform driver.

This CF card is especially useful for PDAs, which currently tend to have
no other solution for USB host capability.

From: Botond Botyanszki <boti@rocketmail.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
19 years ago[PATCH] USB: sl811-hcd fixes
David Brownell [Thu, 26 May 2005 12:55:55 +0000 (05:55 -0700)]
[PATCH] USB: sl811-hcd fixes

Various fixes to the sl811-hcd driver:

  * Fix small glitches that crept in during recent evolution of usbcore's hcd
    glue layer, coupling endpoint state records to usbcore and active urbs.
    (As noted by folk whose boards weren't stuck on 2.6.9 kernels...)

  * Cope with various system-specific issues:
      - Some configurations (e.g. a CF-card uses this chip) have iospace
        addresses for the two registers, rather than memory mapped ones.
      - Some configurations do interesting things with IRQs; maybe the
        line is shared, or it doesn't support level triggering.
      - Not all boards can drive the chip reset line in software.

  * Address a potential race during unlinking.

  * Tweak probe/remove section info to handle the case where this segment
    of a platform bus is hotpluggable (e.g. CF card).  (The basic problem
    is that CONFIG_HOTPLUG is global, which is wrong since not all busses
    can hotplug even on hotplug-friendly systems...)  Also export the
    driver, so that the CF driver can depend on it.

Also removed some annoying end-of-line whitespace.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
19 years ago[PATCH] I2C: ALI1563 SMBus driver fix
R.Marek@sh.cvut.cz [Thu, 21 Apr 2005 09:07:56 +0000 (09:07 +0000)]
[PATCH] I2C: ALI1563 SMBus driver fix

This patch fixes "grave" bugs in i2c-ali1563 driver. It seems on recent
chipset revisions the HSTS_DONE is set only for block transfers, so we
must detect the end of ordinary transaction other way. Also due to missing
and mask, setting other transfer modes was not possible. Moreover the
continous byte mode transfer uses DAT0 for command rather than CMD command.
All those changes were tested with help of Chunhao Huang from Winbond.

I'm willing to maintain the driver. Second patch adds me as maintainer
if this is neccessary.

Signed-Off-By: Rudolf Marek <r.marek@sh.cvut.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
19 years agoAutomatic merge of rsync://rsync.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6
Linus Torvalds [Tue, 31 May 2005 18:07:54 +0000 (11:07 -0700)]
Merge ... /pub/scm/linux/kernel/git/aegl/linux-2.6

19 years ago[IA64] Use "PER_CPU" form of EXPORT macro
Tony Luck [Tue, 31 May 2005 17:38:32 +0000 (10:38 -0700)]
[IA64] Use "PER_CPU" form of EXPORT macro

I was gently reminded that there are per-cpu forms of the EXPORT_SYMBOL macros.

Signed-off-by: Tony Luck <tony.luck@intel.com>
19 years ago[PATCH] Relax idecd dma alignment check
Jens Axboe [Tue, 31 May 2005 15:47:36 +0000 (17:47 +0200)]
[PATCH] Relax idecd dma alignment check

Only the address needs alignment of mask bits, length should work with
a relaxed alignment check.

Signed-off-by: Jens Axboe <axboe@suse.de>
[ This is take 2: make the length check be for 16-byte alignment, not
  just word alignment.  That should hopefully keep everybody happy,
  while still allowing CD writing with DMA ]

Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] ppc64: actually call prom_send_capabilities
Paul Mackerras [Tue, 31 May 2005 07:01:11 +0000 (17:01 +1000)]
[PATCH] ppc64: actually call prom_send_capabilities

When I sent in the patch adding the code for the kernel to tell the
firmware about its capabilities on pSeries machines, I included the
function to give the capabilities to firmware but somehow forgot the
hunk that adds the call to the new function.  This patch adds the
call.

Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[IPV4]: Fix BUG() in 2.6.x, udp_poll(), fragments + CONFIG_HIGHMEM
Herbert Xu [Mon, 30 May 2005 22:50:15 +0000 (15:50 -0700)]
[IPV4]: Fix BUG() in 2.6.x, udp_poll(), fragments + CONFIG_HIGHMEM

Steven Hand <Steven.Hand@cl.cam.ac.uk> wrote:
>
> Reconstructed forward trace:
>
>   net/ipv4/udp.c:1334   spin_lock_irq()
>   net/ipv4/udp.c:1336   udp_checksum_complete()
> net/core/skbuff.c:1069   skb_shinfo(skb)->nr_frags > 1
> net/core/skbuff.c:1086   kunmap_skb_frag()
> net/core/skbuff.h:1087   local_bh_enable()
> kernel/softirq.c:0140   WARN_ON(irqs_disabled());

The receive queue lock is never taken in IRQs (and should never be) so
we can simply substitute bh for irq.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
19 years ago[NETFILTER]: Fix deadlock with ip_queue and tcp local input path.
Harald Welte [Mon, 30 May 2005 22:35:26 +0000 (15:35 -0700)]
[NETFILTER]: Fix deadlock with ip_queue and tcp local input path.

When we have ip_queue being used from LOCAL_IN, then we end up with a
situation where the verdicts coming back from userspace traverse the TCP
input path from syscall context.  While this seems to work most of the
time, there's an ugly deadlock:

syscall context is interrupted by the timer interrupt.  When the timer
interrupt leaves, the timer softirq get's scheduled and calls
tcp_delack_timer() and alike.  They themselves do bh_lock_sock(sk),
which is already held from somewhere else -> boom.

I've now tested the suggested solution by Patrick McHardy and Herbert Xu to
simply use local_bh_{en,dis}able().

Signed-off-by: Harald Welte <laforge@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
19 years agoMerge of rsync://rsync.kernel.org/pub/scm/linux/kernel/git/davem/tg3-2.6
Linus Torvalds [Mon, 30 May 2005 05:39:38 +0000 (22:39 -0700)]
Merge ... /pub/scm/linux/kernel/git/davem/tg3-2.6

19 years agoMerge of /home/davem/src/GIT/tg3-2.6/
David S. Miller [Mon, 30 May 2005 04:25:01 +0000 (21:25 -0700)]
Merge of /home/davem/src/GIT/tg3-2.6/

19 years ago[NET]: Use %lx for netdev->features sysfs formatting.
David S. Miller [Mon, 30 May 2005 03:28:25 +0000 (20:28 -0700)]
[NET]: Use %lx for netdev->features sysfs formatting.

Signed-off-by: David S. Miller <davem@davemloft.net>
19 years ago[IPV6]: Clear up user copy warning in flowlabel code.
David S. Miller [Mon, 30 May 2005 03:28:01 +0000 (20:28 -0700)]
[IPV6]: Clear up user copy warning in flowlabel code.

We are intentionally ignoring the copy_to_user() value,
make it clear to the compiler too.

Noted by Jeff Garzik.

Signed-off-by: David S. Miller <davem@davemloft.net>
19 years ago[NET]: Add ethtool support for NETIF_F_HW_CSUM.
Jon Mason [Mon, 30 May 2005 03:27:24 +0000 (20:27 -0700)]
[NET]: Add ethtool support for NETIF_F_HW_CSUM.

Signed-off-by: Jon Mason <jdmason@us.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
19 years ago[IPV4]: Kill MULTIPATHHOLDROUTE flag.
Pravin B. Shelar [Mon, 30 May 2005 03:26:44 +0000 (20:26 -0700)]
[IPV4]: Kill MULTIPATHHOLDROUTE flag.

It cannot work properly, so just ignore it in drr
and rr multipath algorithms just like the random
multipath algorithm does.

Suggested by Herbert Xu.

Signed-off by: Pravin B. Shelar <pravins@calsoftinc.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
19 years ago[NET]: Add is_multicast_ether_addr() in include/linux/etherdevice.h
Michael Ellerman [Mon, 30 May 2005 03:24:30 +0000 (20:24 -0700)]
[NET]: Add is_multicast_ether_addr() in include/linux/etherdevice.h

This patch adds is_multicast_ether_addr() to go along with
is_valid_ether_addr() and friends. It then changes
is_valid_ether_addr() to use the new macro, and fixes up the comment
on that function to move implementation details out of the API doco.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
19 years ago[IPV4]: Primary and secondary addresses
Harald Welte [Mon, 30 May 2005 03:23:46 +0000 (20:23 -0700)]
[IPV4]: Primary and secondary addresses

Add an option to make secondary IP addresses get promoted
when primary IP addresses are removed from the device.
It defaults to off to preserve existing behavior.

Signed-off-by: Harald Welte <laforge@gnumonks.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
19 years agoAutomatic merge of 'misc-fixes' branch from
Linus Torvalds [Mon, 30 May 2005 02:30:03 +0000 (19:30 -0700)]
Automatic merge of 'misc-fixes' branch from

rsync://rsync.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev

19 years ago[TG3]: Fix bug in tg3_load_firmware_cpu
Michael Chan [Sun, 29 May 2005 21:59:49 +0000 (14:59 -0700)]
[TG3]: Fix bug in tg3_load_firmware_cpu

Add tg3_nvram_lock() and tg3_nvram_unlock() calls around tg3_halt_cpu().
It is possible that the bootcode may be loading code from nvram during
this call and stopping the cpu without getting the lock may cause
uncompleted nvram data to be left in the nvram data register. Subsequent
calls to read/write nvram data will fail.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
19 years ago[TG3]: Add interrupt test
Michael Chan [Sun, 29 May 2005 21:59:20 +0000 (14:59 -0700)]
[TG3]: Add interrupt test

This test uses the previously added tg3_test_interrupt() to perform the
test.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
19 years ago[TG3]: Add loopback test
Michael Chan [Sun, 29 May 2005 21:58:59 +0000 (14:58 -0700)]
[TG3]: Add loopback test

The test will loopback one packet in MAC loopback mode and verify the
packet data.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
19 years ago[TG3]: Add memory test
Michael Chan [Sun, 29 May 2005 21:58:36 +0000 (14:58 -0700)]
[TG3]: Add memory test

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
19 years ago[TG3]: Add register test
Michael Chan [Sun, 29 May 2005 21:58:11 +0000 (14:58 -0700)]
[TG3]: Add register test

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
19 years ago[TG3]: Add parameter to tg3_halt
Michael Chan [Sun, 29 May 2005 21:57:48 +0000 (14:57 -0700)]
[TG3]: Add parameter to tg3_halt

Add a reset kind parameter to tg3_halt() so that the RESET_KIND_SUSPEND
parameter can be passed to tg3_halt() before doing offline tests.

All other calls to tg3_halt() will use the RESET_KIND_SHUTDOWN
parameter.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
19 years ago[TG3]: Add link test
Michael Chan [Sun, 29 May 2005 21:57:23 +0000 (14:57 -0700)]
[TG3]: Add link test

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
19 years ago[TG3]: Add nvram test
Michael Chan [Sun, 29 May 2005 21:56:58 +0000 (14:56 -0700)]
[TG3]: Add nvram test

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
19 years ago[TG3]: Add basic selftest infrastructure
Michael Chan [Sun, 29 May 2005 21:56:34 +0000 (14:56 -0700)]
[TG3]: Add basic selftest infrastructure

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
19 years ago[BRIDGE]: receive path optimization
Stephen Hemminger [Sun, 29 May 2005 21:16:48 +0000 (14:16 -0700)]
[BRIDGE]: receive path optimization

This improves the bridge local receive path by avoiding going
through another softirq.  The bridge receive path is already being called
from a netif_receive_skb() there is no point in going through another
receiveq round trip.

Recursion is limited because bridge can never be a port of a bridge
so handle_bridge() always returns.

Signed-off-by: David S. Miller <davem@davemloft.net>
19 years ago[BRIDGE]: prevent bad forwarding table updates
Stephen Hemminger [Sun, 29 May 2005 21:15:55 +0000 (14:15 -0700)]
[BRIDGE]: prevent bad forwarding table updates

Avoid poisoning of the bridge forwarding table by frames that have been
dropped by filtering. This prevents spoofed source addresses on hostile
side of bridge from causing packet leakage, a small but possible security
risk.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
19 years ago[BRIDGE]: set features based on enslaved devices
Stephen Hemminger [Sun, 29 May 2005 21:15:17 +0000 (14:15 -0700)]
[BRIDGE]: set features based on enslaved devices

Make features of the bridge pseudo-device be a subset of the underlying
devices.  Motivated by Xen and others who use bridging to do failover.

Signed-off-by: Catalin BOIE <catab at umrella.ro>
Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
19 years ago[BRIDGE]: make dev->features unsigned
Stephen Hemminger [Sun, 29 May 2005 21:14:35 +0000 (14:14 -0700)]
[BRIDGE]: make dev->features unsigned

The features field in netdevice is really a bitmask, and bitmask's should
be unsigned.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
19 years ago[BRIDGE]: features change notification
Stephen Hemminger [Sun, 29 May 2005 21:13:47 +0000 (14:13 -0700)]
[BRIDGE]: features change notification

Resend of earlier patch (no changes) from Catalin used to provide
device feature change notification.

Signed-off-by: Catalin BOIE <catab at umbrella.ro>
Acked-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
19 years agolibata: bump version
Jeff Garzik [Sun, 29 May 2005 18:48:20 +0000 (14:48 -0400)]
libata: bump version

19 years agoAutomatic merge of /spare/repo/netdev-2.6 branch use-after-unmap
<jgarzik@pretzel.yyz.us> [Sun, 29 May 2005 18:24:57 +0000 (14:24 -0400)]
Merge ... /spare/repo/netdev-2.6 branch use-after-unmap

19 years agoAutomatic merge of 'for-linus' branch from
Linus Torvalds [Sun, 29 May 2005 17:40:13 +0000 (10:40 -0700)]
Automatic merge of 'for-linus' branch from

rsync://rsync.kernel.org/pub/scm/linux/kernel/git/dtor/input

19 years agoInput: Fix fast scrolling scancodes in atkbd.c
Vojtech Pavlik [Sun, 29 May 2005 06:27:44 +0000 (01:27 -0500)]
Input: Fix fast scrolling scancodes in atkbd.c

Signed-off-by: Vojtech Pavlik <vojtech@suse.cz>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>