GitHub/moto-9609/android_kernel_motorola_exynos9610.git
7 years agonfp: allocate a private workqueue for driver work
Jakub Kicinski [Tue, 27 Jun 2017 07:50:27 +0000 (00:50 -0700)]
nfp: allocate a private workqueue for driver work

Since we grab pf->lock around pci_enable_sriov() we can no longer
safely queue work which may also grab that lock onto system workqueue.
pci_enable_sriov() will flush system workqueue as part to wait for VF
probing.

Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agonfp: reorder SR-IOV config and nfp_app SR-IOV callbacks
Jakub Kicinski [Tue, 27 Jun 2017 07:50:26 +0000 (00:50 -0700)]
nfp: reorder SR-IOV config and nfp_app SR-IOV callbacks

We previously assumed that app callback can be guaranteed to be
executed before SR-IOV is actually enabled.  Given that we can't
guarantee that SR-IOV will be disabled during probe or that we
will be able to disable it on remove, we should reorder the callbacks.
We should also call the app's sriov_enable if SR-IOV was enabled
during probe.

Application FW must be able to disable VFs internally and not depend
on them being removed at PCIe level.

Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agonfp: handle SR-IOV already enabled when driver is probing
Jakub Kicinski [Tue, 27 Jun 2017 07:50:25 +0000 (00:50 -0700)]
nfp: handle SR-IOV already enabled when driver is probing

We assumed that when we probe number of enabled VFs will be at 0.
This doesn't have to be the case for example if previous driver left
SR-IOV enabled due to some VFs being assigned.  Read the number of VFs
enabled.  Fail probe if it's above current FWs limit.

Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agonfp: wire get_phys_port_name on representors
Jakub Kicinski [Tue, 27 Jun 2017 07:50:24 +0000 (00:50 -0700)]
nfp: wire get_phys_port_name on representors

Make nfp_port_get_phys_port_name() support new port types and
wire it up to representors' struct net_device_ops.

Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agonfp: allow converting representor's netdev into nfp_port
Jakub Kicinski [Tue, 27 Jun 2017 07:50:23 +0000 (00:50 -0700)]
nfp: allow converting representor's netdev into nfp_port

Based on struct net_device_ops figure out if netdev is a nfp_repr.
Use this knowledge to convert netdev directly to nfp_port.

Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agonfp: move representors' struct net_device_ops to shared code
Jakub Kicinski [Tue, 27 Jun 2017 07:50:22 +0000 (00:50 -0700)]
nfp: move representors' struct net_device_ops to shared code

Apps shouldn't declare their own struct net_device_ops for
representors, this makes sharing code harder.  Add necessary
nfp_app callbacks and move the definition of representors'
struct net_device_ops to common code.

Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agonfp: make the representor get stats app-independent
Jakub Kicinski [Tue, 27 Jun 2017 07:50:21 +0000 (00:50 -0700)]
nfp: make the representor get stats app-independent

Thanks to the fact that all representors will now have an nfp_port,
we can depend on information there to provide a app-independent
.ndo_get_stats64().

Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agonfp: spawn nfp_ports for PF and VF ports
Jakub Kicinski [Tue, 27 Jun 2017 07:50:20 +0000 (00:50 -0700)]
nfp: spawn nfp_ports for PF and VF ports

nfp_port is an abstraction which is supposed to allow us sharing
code between different netdev types (vNIC vs repr).  Spawn ports
for PFs and VFs to enable this sharing.

Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agonfp: add nfp_app cleanup callback and make flower use it
Jakub Kicinski [Tue, 27 Jun 2017 07:50:19 +0000 (00:50 -0700)]
nfp: add nfp_app cleanup callback and make flower use it

Add a cleanup callback for undoing what app init callback did.
Make flower allocate its private structure on init and free
it from the new callback.

While at it remember to set the app pointer to NULL on the
error path to avoid any races while probe path unwinds.

Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agonfp: remove unused nfp_cpp_area_check_range()
Jakub Kicinski [Tue, 27 Jun 2017 07:50:18 +0000 (00:50 -0700)]
nfp: remove unused nfp_cpp_area_check_range()

Remove unused nfp_cpp_area_check_range() function.

Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agonfp: add helper for mapping runtime symbols
Jakub Kicinski [Tue, 27 Jun 2017 07:50:17 +0000 (00:50 -0700)]
nfp: add helper for mapping runtime symbols

Move most of the helper for mapping RTsyms from nfp_net_main.c
to nfpcore.  Use the new helper directly for mapping MAC statistics,
since they don't need to include the PCIe interface ID in the symbol
name.

Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agonfp: move area mapping helper into nfpcore
Jakub Kicinski [Tue, 27 Jun 2017 07:50:16 +0000 (00:50 -0700)]
nfp: move area mapping helper into nfpcore

nfp_net_map_area() is a helper for mapping areas of NFP memory
defined in nfp_net_main.c.  Move it to nfpcore to allow reuse
and rename accordingly.  Create an additional helper -
nfp_cpp_area_alloc_acquire() the opposite of already existing
nfp_cpp_area_release_free().

Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agonfp: explicitly check if application FW is loaded
Jakub Kicinski [Tue, 27 Jun 2017 07:50:15 +0000 (00:50 -0700)]
nfp: explicitly check if application FW is loaded

We support application FW being either loaded automatically at
boot from flash or (more commonly) by the driver from disk.
If FW is not found on disk and nothing is preloaded users are
faced with this unintuitive error:

nfp 0000:04:00.0: nfp: Failed to find PF symbol _pf0_net_bar0

We can do better.  Since we rely on symbol table being present -
check early if it could be correctly read out of from the device
and if not print a more informative message.

Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agoMerge branch 'udp-ipv6-use-scratch-helpers'
David S. Miller [Tue, 27 Jun 2017 19:43:57 +0000 (15:43 -0400)]
Merge branch 'udp-ipv6-use-scratch-helpers'

Paolo Abeni says:

====================
ipv6: udp: exploit dev_scratch helpers

When bringing in the recent cache optimization for the UDP protocol, I forgot
to leverage the newly introduced scratched area helpers in the UDPv6 code path.
As a result, the UDPv6 implementation suffers some unnecessary performance
penality when compared to v4.

This series aim to bring back UDPv6 on equal footing in respect to v4.
The first patch moves the shared helpers to the common include files, while
the second uses them in the UDPv6 code.

This gives 5-8% performance improvement for a system under flood with small
UDPv6 packets. The performance delta is less than the one reported on the
original patch set because the UDPv6 code path already leveraged some of the
optimization.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agoipv6: udp: leverage scratch area helpers
Paolo Abeni [Mon, 26 Jun 2017 17:01:51 +0000 (19:01 +0200)]
ipv6: udp: leverage scratch area helpers

The commit b65ac44674dd ("udp: try to avoid 2 cache miss on dequeue")
leveraged the scratched area helpers for UDP v4 but I forgot to
update accordingly the IPv6 code path.

This change extends the scratch area usage to the IPv6 code, synching
the two implementations and giving some performance benefit.
IPv6 is again almost on the same level of IPv4, performance-wide.

Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agoudp: move scratch area helpers into the include file
Paolo Abeni [Mon, 26 Jun 2017 17:01:50 +0000 (19:01 +0200)]
udp: move scratch area helpers into the include file

So that they can be later used by the IPv6 code, too.
Also lift the comments a bit.

Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agotcp: fix null ptr deref in getsockopt(..., TCP_ULP, ...)
Dave Watson [Mon, 26 Jun 2017 15:36:47 +0000 (08:36 -0700)]
tcp: fix null ptr deref in getsockopt(..., TCP_ULP, ...)

If icsk_ulp_ops is unset, it dereferences a null ptr.
Add a null ptr check.

BUG: KASAN: null-ptr-deref in copy_to_user include/linux/uaccess.h:168 [inline]
BUG: KASAN: null-ptr-deref in do_tcp_getsockopt.isra.33+0x24f/0x1e30 net/ipv4/tcp.c:3057
Read of size 4 at addr 0000000000000020 by task syz-executor1/15452

Signed-off-by: Dave Watson <davejwatson@fb.com>
Reported-by: "Levin, Alexander (Sasha Levin)" <alexander.levin@verizon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agovxlan: fix incorrect nlattr access in MTU check
Matthias Schiffer [Tue, 27 Jun 2017 12:42:43 +0000 (14:42 +0200)]
vxlan: fix incorrect nlattr access in MTU check

The access to the wrong variable could lead to a NULL dereference and
possibly other invalid memory reads in vxlan newlink/changelink requests
with a IFLA_MTU attribute.

Fixes: a985343ba906 "vxlan: refactor verification and application of configuration"
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agonet: remove policy-routing.txt documentation
Vincent Bernat [Tue, 27 Jun 2017 13:42:57 +0000 (15:42 +0200)]
net: remove policy-routing.txt documentation

It dates back from 2.1.16 and is obsolete since 2.1.68 when the current
rule system has been introduced.

Signed-off-by: Vincent Bernat <vincent@bernat.im>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agonet/mlx4: fix spelling mistake: "coalesing" -> "coalescing"
Colin Ian King [Mon, 26 Jun 2017 12:53:46 +0000 (13:53 +0100)]
net/mlx4: fix spelling mistake: "coalesing" -> "coalescing"

Trivial fix to spelling mistake in en_dbg debug message

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agoMerge branch 'net-add-netlink_ext_ack-support-to-rtnl_link_ops'
David S. Miller [Tue, 27 Jun 2017 03:13:23 +0000 (23:13 -0400)]
Merge branch 'net-add-netlink_ext_ack-support-to-rtnl_link_ops'

Matthias Schiffer says:

====================
net: add netlink_ext_ack support to rtnl_link_ops

Same changes as http://patchwork.ozlabs.org/patch/780351/ , split into
separate patches for each rtnl_link_ops field as requested.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agonet: add netlink_ext_ack argument to rtnl_link_ops.slave_validate
Matthias Schiffer [Sun, 25 Jun 2017 21:56:03 +0000 (23:56 +0200)]
net: add netlink_ext_ack argument to rtnl_link_ops.slave_validate

Add support for extended error reporting.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
Acked-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agonet: add netlink_ext_ack argument to rtnl_link_ops.slave_changelink
Matthias Schiffer [Sun, 25 Jun 2017 21:56:02 +0000 (23:56 +0200)]
net: add netlink_ext_ack argument to rtnl_link_ops.slave_changelink

Add support for extended error reporting.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
Acked-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agonet: add netlink_ext_ack argument to rtnl_link_ops.validate
Matthias Schiffer [Sun, 25 Jun 2017 21:56:01 +0000 (23:56 +0200)]
net: add netlink_ext_ack argument to rtnl_link_ops.validate

Add support for extended error reporting.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
Acked-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agonet: add netlink_ext_ack argument to rtnl_link_ops.changelink
Matthias Schiffer [Sun, 25 Jun 2017 21:56:00 +0000 (23:56 +0200)]
net: add netlink_ext_ack argument to rtnl_link_ops.changelink

Add support for extended error reporting.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
Acked-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agonet: add netlink_ext_ack argument to rtnl_link_ops.newlink
Matthias Schiffer [Sun, 25 Jun 2017 21:55:59 +0000 (23:55 +0200)]
net: add netlink_ext_ack argument to rtnl_link_ops.newlink

Add support for extended error reporting.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
Acked-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agonet: macb: add fixed-link node support
Michael Grzeschik [Fri, 23 Jun 2017 14:54:10 +0000 (16:54 +0200)]
net: macb: add fixed-link node support

In case the MACB is directly connected to a
non-mdio PHY/device, it should be possible to provide
a fixed link configuration in the DT.

Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agoMerge tag 'wireless-drivers-next-for-davem-2017-06-25' of git://git.kernel.org/pub...
David S. Miller [Sun, 25 Jun 2017 18:45:34 +0000 (14:45 -0400)]
Merge tag 'wireless-drivers-next-for-davem-2017-06-25' of git://git./linux/kernel/git/kvalo/wireless-drivers-next

Kalle Valo says:

====================
wireless-drivers-next patches for 4.13

New features and bug fixes to quite a few different drivers, but
nothing really special standing out.

What makes me happy that we have now more vendors actively
contributing to upstream drivers. In this pull request we have patches
from Broadcom, Intel, Qualcomm, Realtek and Redpine Signals, and I
still have patches from Marvell and Quantenna pending in patchwork. Now
that's something comparing to how things looked 11 years ago in Jeff
Garzik's "State of the Union: Wireless" email:

https://lkml.org/lkml/2006/1/5/671

Major changes:

wil6210

* add low level RF sector interface via nl80211 vendor commands

* add module parameter ftm_mode to load separate firmware for factory
  testing

* support devices with different PCIe bar size

* add support for PCIe D3hot in system suspend

* remove ioctl interface which should not be in a wireless driver

ath10k

* go back to using dma_alloc_coherent() for firmware scratch memory

* add per chain RSSI reporting

brcmfmac

* add support multi-scheduled scan

* add scheduled scan support for specified BSSIDs

* add support for brcm43430 revision 0

wlcore

* add wil1285 compatible

rsi

* add RS9113 USB support

iwlwifi

* FW API documentation improvements (for tools and htmldoc)

* continuing work for the new A000 family

* bump the maximum supported FW API to 31

* improve the differentiation between 8000, 9000 and A000 families
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agoMerge branch 'sctp-RFC-4960-Errata-fixes'
David S. Miller [Sun, 25 Jun 2017 18:43:53 +0000 (14:43 -0400)]
Merge branch 'sctp-RFC-4960-Errata-fixes'

Marcelo Ricardo Leitner says:

====================
sctp: RFC 4960 Errata fixes

This patchset contains fixes for 4 Errata topics from
https://tools.ietf.org/html/draft-ietf-tsvwg-rfc4960-errata-01
Namely, sections:
 3.12. Order of Adjustments of partial_bytes_acked and cwnd
 3.22. Increase of partial_bytes_acked in Congestion Avoidance
 3.26. CWND Increase in Congestion Avoidance Phase
 3.27. Refresh of cwnd and ssthresh after Idle Period

Tests performed with netperf using net namespaces, with drop rates at
0%, 0.5% and 1% by netem, IPv4 and IPv6, 10 runs for each combination.
I couldn't spot differences on the stats. With and without these patches
the results vary in a similar way in terms of throughput and
retransmissions.

Tests with 20ms delay and 20ms delay + drops at 0.5% and 1% also had
results in a similar way, no noticeable difference.

Looking at cwnd, it was possible to notice slightly lower values being
used while still sustaining same throughput profile.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agosctp: adjust ssthresh when transport is idle
Marcelo Ricardo Leitner [Fri, 23 Jun 2017 22:59:36 +0000 (19:59 -0300)]
sctp: adjust ssthresh when transport is idle

RFC 4960 Errata 3.27 identifies that ssthresh should be adjusted to cwnd
because otherwise it could cause the transport to lock into congestion
avoidance phase specially if ssthresh was previously reduced by some
packet drop, leading to poor performance.

The Errata says to adjust ssthresh to cwnd only once, though the same
goal is achieved by updating it every time we update cwnd too. The
caveat is that we could take longer to get back up to speed but that
should be compensated by the fact that we don't adjust on RTO basis (as
RFC says) but based on Heartbeats, which are usually way longer.

See-also: https://tools.ietf.org/html/draft-ietf-tsvwg-rfc4960-errata-01#section-3.27
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agosctp: adjust cwnd increase in Congestion Avoidance phase
Marcelo Ricardo Leitner [Fri, 23 Jun 2017 22:59:35 +0000 (19:59 -0300)]
sctp: adjust cwnd increase in Congestion Avoidance phase

RFC4960 Errata 3.26 identified that at the same time RFC4960 states that
cwnd should never grow more than 1*MTU per RTT, Section 7.2.2 was
underspecified and as described could allow increasing cwnd more than
that.

This patch updates it so partial_bytes_acked is maxed to cwnd if
flight_size doesn't reach cwnd, protecting it from such case.

See-also: https://tools.ietf.org/html/draft-ietf-tsvwg-rfc4960-errata-01#section-3.26
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agosctp: allow increasing cwnd regardless of ctsn moving or not
Marcelo Ricardo Leitner [Fri, 23 Jun 2017 22:59:34 +0000 (19:59 -0300)]
sctp: allow increasing cwnd regardless of ctsn moving or not

As per RFC4960 Errata 3.22, this condition is not needed anymore as it
could cause the partial_bytes_acked to not consider the TSNs acked in
the Gap Ack Blocks although they were received by the peer successfully.

This patch thus drops the check for new Cumulative TSN Ack Point,
leaving just the flight_size < cwnd one.

See-also: https://tools.ietf.org/html/draft-ietf-tsvwg-rfc4960-errata-01#section-3.22
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agosctp: update order of adjustments of partial_bytes_acked and cwnd
Marcelo Ricardo Leitner [Fri, 23 Jun 2017 22:59:33 +0000 (19:59 -0300)]
sctp: update order of adjustments of partial_bytes_acked and cwnd

RFC4960 Errata 3.12 says RFC4960 is unclear about the order of
adjustments applied to partial_bytes_acked and cwnd in the congestion
avoidance phase, and that the actual order should be:
partial_bytes_acked is reset to (partial_bytes_acked - cwnd). Next, cwnd
is increased by MTU.

We were first increasing cwnd, and then subtracting the new value pba,
which leads to a different result as pba is smaller than what it should
and could cause cwnd to not grow as much.

See-also: https://tools.ietf.org/html/draft-ietf-tsvwg-rfc4960-errata-01#section-3.12
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agonet: Remove ndo_dfwd_start_xmit
Mintz, Yuval [Sun, 25 Jun 2017 08:09:12 +0000 (11:09 +0300)]
net: Remove ndo_dfwd_start_xmit

Looks like commit f663dd9aaf9e ("net: core: explicitly select a txq before doing l2 forwarding")
has removed the need for this dedicated xmit function [it even explicitly
states so in its commit log message] but it hasn't removed the definition
of the ndo.

Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
CC: Jason Wang <jasowang@redhat.com>
CC: John Fastabend <john.r.fastabend@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agoMerge branch 'qcom-emac-various-minor-improvements'
David S. Miller [Sun, 25 Jun 2017 15:44:29 +0000 (11:44 -0400)]
Merge branch 'qcom-emac-various-minor-improvements'

Timur Tabi says:

====================
net: qcom/emac: various minor improvements

A collection of minor fixes and features to the Qualcomm Technologies
EMAC network driver.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agonet: qcom/emac: add support for emulation systems
Timur Tabi [Fri, 23 Jun 2017 19:33:30 +0000 (14:33 -0500)]
net: qcom/emac: add support for emulation systems

On emulation systems, the EMAC's internal PHY ("SGMII") is not present,
but is not needed for network functionality.  So just display a warning
message and ignore the SGMII.

Tested-by: Philip Elcan <pelcan@codeaurora.org>
Tested-by: Adam Wallis <awallis@codeaurora.org>
Signed-off-by: Timur Tabi <timur@codeaurora.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agonet: qcom/emac: do not reset the EMAC during initialization
Timur Tabi [Fri, 23 Jun 2017 19:33:29 +0000 (14:33 -0500)]
net: qcom/emac: do not reset the EMAC during initialization

On ACPI systems, the driver depends on firmware pre-initializing the
EMAC because we don't have access to the clocks, and the EMAC has specific
clock programming requirements.  Therefore, we don't want to reset the
EMAC while we are completing the initialization.

Tested-by: Richard Ruigrok <rruigrok@codeaurora.org>
Signed-off-by: Timur Tabi <timur@codeaurora.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agonet: qcom/emac: add shutdown function
Timur Tabi [Fri, 23 Jun 2017 19:33:28 +0000 (14:33 -0500)]
net: qcom/emac: add shutdown function

The shutdown function halts all DMA and interrupts, so that all
operations are discontinued when the system shuts down, e.g. via
kexec or a forced reboot.

Tested-by: Tyler Baicar <tbaicar@codeaurora.org>
Signed-off-by: Timur Tabi <timur@codeaurora.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agoaf_iucv: Move sockaddr length checks to before accessing sa_family in bind and connec...
Mateusz Jurczyk [Fri, 23 Jun 2017 17:32:28 +0000 (19:32 +0200)]
af_iucv: Move sockaddr length checks to before accessing sa_family in bind and connect handlers

Verify that the caller-provided sockaddr structure is large enough to
contain the sa_family field, before accessing it in bind() and connect()
handlers of the AF_IUCV socket. Since neither syscall enforces a minimum
size of the corresponding memory region, very short sockaddrs (zero or
one byte long) result in operating on uninitialized memory while
referencing .sa_family.

Fixes: 52a82e23b9f2 ("af_iucv: Validate socket address length in iucv_sock_bind()")
Signed-off-by: Mateusz Jurczyk <mjurczyk@google.com>
[jwi: removed unneeded null-check for addr]
Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agonet/iucv: improve endianness handling
Hans Wippel [Fri, 23 Jun 2017 17:32:27 +0000 (19:32 +0200)]
net/iucv: improve endianness handling

Use proper endianness conversion for an skb protocol assignment. Given
that IUCV is only available on big endian systems (s390), this simply
avoids an endianness warning reported by sparse.

Signed-off-by: Hans Wippel <hwippel@linux.vnet.ibm.com>
Reviewed-by: Julian Wiedmann <jwi@linux.vnet.ibm.com>
Reviewed-by: Ursula Braun <ubraun@linux.vnet.ibm.com>
Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agonet: dsa: mv88e6xxx: fix error code in mv88e6390_serdes_power()
Dan Carpenter [Fri, 23 Jun 2017 15:17:04 +0000 (18:17 +0300)]
net: dsa: mv88e6xxx: fix error code in mv88e6390_serdes_power()

We're accidentally returning the wrong variable.  "cmode" is
uninitialized at this point so it causes a static checker warning.

Fixes: 6335e9f2446b ("net: dsa: mv88e6xxx: mv88e6390X SERDES support")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agoMerge branch 'nfp-add-flower-app-with-representors'
David S. Miller [Sun, 25 Jun 2017 15:42:09 +0000 (11:42 -0400)]
Merge branch 'nfp-add-flower-app-with-representors'

Simon Horman says:

====================
nfp: add flower app with representors

this series adds a flower app to the NFP driver.
It initialises four types of netdevs:

* PF netdev - lower-device for communication of packets to device
* PF representor netdev
* VF representor netdevs
* Phys port representor netdevs

The PF netdev acts as a lower-device which sends and receives packets to
and from the firmware. The representors act as upper-devices. For TX
representors attach a metadata dst to the skb which is used by the PF
netdev to prepend metadata to the packet before forwarding the firmware. On
RX the PF netdev looks up the representor based on the prepended metadata
received from the firmware and forwards the skb to the representor after
removing the metadata.

Control queues are used to send and receive control messages which are
used to communicate configuration information with the firmware. These
are in separate vNIC to the queues belonging to the PF netdev. The control
queues are not exposed to use-space via a netdev or any other means.

The first 9 patches of this series provide app-independent infrastructure
to instantiate representors and the remaining 3 patches provide an app
which uses this infrastructure.

As the name implies this app is targeted at providing offload of TC flower.
Flower offload - allowing classifiers to be attached to representor netdevs
- is intended to be provided by follow-up patches at which point it will
become the dominant feature of the app.

Minor changes since v2 noted in changelogs of individual patches.
Review of v1 and v2 of this patchset have been addressed either
through discussion on-list or changes in this patchset.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agonfp: add VF and PF representors to flower app
Simon Horman [Fri, 23 Jun 2017 20:12:09 +0000 (22:12 +0200)]
nfp: add VF and PF representors to flower app

Initialise VF and PF representors in flower app.

Based in part on work by Benjamin LaHaise, Bert van Leeuwen and
Jakub Kicinski.

Signed-off-by: Simon Horman <simon.horman@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agonfp: add flower app
Simon Horman [Fri, 23 Jun 2017 20:12:08 +0000 (22:12 +0200)]
nfp: add flower app

Add app for flower offload. At this point the PF netdev and phys port
representor netdevs are initialised. Follow-up work will add support for
VF and PF representors and beyond that offloading the flower classifier.

Based in part on work by Benjamin LaHaise and Bert van Leeuwen.

Signed-off-by: Simon Horman <simon.horman@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agonfp: add support for control messages for flower app
Simon Horman [Fri, 23 Jun 2017 20:12:07 +0000 (22:12 +0200)]
nfp: add support for control messages for flower app

In preparation for adding a new flower app - targeted at offloading
the flower classifier - provide support for control message that it will
use to communicate with the NFP.

Based in part on work by Bert van Leeuwen.

Signed-off-by: Simon Horman <simon.horman@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agonfp: add support for tx/rx with metadata portid
Simon Horman [Fri, 23 Jun 2017 20:12:06 +0000 (22:12 +0200)]
nfp: add support for tx/rx with metadata portid

Allow tx/rx with metadata port id. This will be used for tx/rx of
representor netdevs acting as upper-devices while a pf netdev acts
as a lower-device.

Signed-off-by: Simon Horman <simon.horman@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agonfp: provide nfp_port to of nfp_net_get_mac_addr()
Simon Horman [Fri, 23 Jun 2017 20:12:05 +0000 (22:12 +0200)]
nfp: provide nfp_port to of nfp_net_get_mac_addr()

Provide port rather than vNIC as parameter of nfp_net_get_mac_addr.
This is to allow this function to be used by representor netdevs where
a vNIC may have more than one physical port none of which are associated
with the vNIC.

Signed-off-by: Simon Horman <simon.horman@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agonfp: app callbacks for SRIOV
Simon Horman [Fri, 23 Jun 2017 20:12:04 +0000 (22:12 +0200)]
nfp: app callbacks for SRIOV

Add app-callbacks for app-specific initialisation of SRIOV.

Disabling SRIOV is brought forward in nfp_pci_remove()
so that nfp_app_sriov_disable is called while the app still exists.

This is intended to be used to implement representor netdevs for virtual
ports.

Signed-off-by: Simon Horman <simon.horman@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agonfp: add stats and xmit helpers for representors
Simon Horman [Fri, 23 Jun 2017 20:12:03 +0000 (22:12 +0200)]
nfp: add stats and xmit helpers for representors

Provide helpers for stats and xmit on representor netdevs.

Parts based on work by Bert van Leeuwen, Benjamin LaHaise and
Jakub Kicinski.

Signed-off-by: Simon Horman <simon.horman@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agonfp: general representor implementation
Simon Horman [Fri, 23 Jun 2017 20:12:02 +0000 (22:12 +0200)]
nfp: general representor implementation

Provide infrastructure to create and destroy representors of a given type.

Parts based on work by Bert van Leeuwen, Benjamin LaHaise,
and Jakub Kicinski.

Signed-off-by: Simon Horman <simon.horman@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agonfp: map mac_stats and vf_cfg BARs
Simon Horman [Fri, 23 Jun 2017 20:12:01 +0000 (22:12 +0200)]
nfp: map mac_stats and vf_cfg BARs

If present map mac_stats and vf_cfg BARs. These will be used by
representor netdevs to read statistics for phys port and vf representors.

Also provide defines describing the layout of the mac_stats area.
Similar defines are already present for the cf_cfg area.

Based in part on work by Jakub Kicinski.

Signed-off-by: Simon Horman <simon.horman@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agonfp: move physical port init into a helper
Jakub Kicinski [Fri, 23 Jun 2017 20:12:00 +0000 (22:12 +0200)]
nfp: move physical port init into a helper

Move MAC/PHY port init into a helper to make it easier to reuse
it in the representor code.

Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agonfp: devlink add support for getting eswitch mode
Jakub Kicinski [Fri, 23 Jun 2017 20:11:59 +0000 (22:11 +0200)]
nfp: devlink add support for getting eswitch mode

Add app callback for reporting eswitch mode.  Non-SRIOV apps
should not implement this callback, nfp_app code will then
respond with -EOPNOTSUPP.

Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agonet: store port/representator id in metadata_dst
Jakub Kicinski [Fri, 23 Jun 2017 20:11:58 +0000 (22:11 +0200)]
net: store port/representator id in metadata_dst

Switches and modern SR-IOV enabled NICs may multiplex traffic from Port
representators and control messages over single set of hardware queues.
Control messages and muxed traffic may need ordered delivery.

Those requirements make it hard to comfortably use TC infrastructure today
unless we have a way of attaching metadata to skbs at the upper device.
Because single set of queues is used for many netdevs stopping TC/sched
queues of all of them reliably is impossible and lower device has to
retreat to returning NETDEV_TX_BUSY and usually has to take extra locks on
the fastpath.

This patch attempts to enable port/representative devs to attach metadata
to skbs which carry port id.  This way representatives can be queueless and
all queuing can be performed at the lower netdev in the usual way.

Traffic arriving on the port/representative interfaces will be have
metadata attached and will subsequently be queued to the lower device for
transmission.  The lower device should recognize the metadata and translate
it to HW specific format which is most likely either a special header
inserted before the network headers or descriptor/metadata fields.

Metadata is associated with the lower device by storing the netdev pointer
along with port id so that if TC decides to redirect or mirror the new
netdev will not try to interpret it.

This is mostly for SR-IOV devices since switches don't have lower netdevs
today.

Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Sridhar Samudrala <sridhar.samudrala@intel.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agoMerge branch 'phy-internal'
David S. Miller [Fri, 23 Jun 2017 19:06:44 +0000 (15:06 -0400)]
Merge branch 'phy-internal'

Florian Fainelli says:

====================
net: phy: Support "internal" PHY interface

This makes the "internal" phy-mode property generally available and
documented and this allows us to remove some custom parsing code
we had for bcmgenet and bcm_sf2 which both used that specific value.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agonet: dsa: bcm_sf2: Remove special handling of "internal" phy-mode
Florian Fainelli [Fri, 23 Jun 2017 17:33:16 +0000 (10:33 -0700)]
net: dsa: bcm_sf2: Remove special handling of "internal" phy-mode

The PHY library now supports an "internal" phy-mode, thus making our
custom parsing code now unnecessary.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agonet: bcmgenet: Remove special handling of "internal" phy-mode
Florian Fainelli [Fri, 23 Jun 2017 17:33:15 +0000 (10:33 -0700)]
net: bcmgenet: Remove special handling of "internal" phy-mode

The PHY library now supports an "internal" phy-mode, thus making our
custom parsing code now unnecessary.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agonet: phy: Support "internal" PHY interface
Florian Fainelli [Fri, 23 Jun 2017 17:33:14 +0000 (10:33 -0700)]
net: phy: Support "internal" PHY interface

Now that the Device Tree binding has been updated, update the PHY
library phy_interface_t and phy_modes to support the "internal" PHY
interface type.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agodt-bindings: Add "internal" as a valid 'phy-mode' property
Florian Fainelli [Fri, 23 Jun 2017 17:33:13 +0000 (10:33 -0700)]
dt-bindings: Add "internal" as a valid 'phy-mode' property

A number of Ethernet MACs have internal Ethernet PHYs and the internal
wiring makes it so that this knowledge needs to be available using the
standard 'phy-mode' property.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agoMerge tag 'mlx5-updates-2017-06-23' of git://git.kernel.org/pub/scm/linux/kernel...
David S. Miller [Fri, 23 Jun 2017 18:24:28 +0000 (14:24 -0400)]
Merge tag 'mlx5-updates-2017-06-23' of git://git./linux/kernel/git/saeed/linux

Saeed Mahameed says:

====================
mlx5-updates-2017-06-23

This series provides some updates to the mlx5 core and netdevice drivers.

Three patches from Tariq, Introduces page reuse mechanism in non-Striding
RQ RX datapath, we allow the the RX descriptor to reuse its allocated page
as much as it could, until the page is fully consumed. RX page reuse
reduces the stress on page allocator and improves RX performance especially
with high speeds (100Gb/s).

Next four patches of the series from Or allows to offload tc flower matching
on ttl/hoplimit and header re-write of hoplimit.

The rest of  the series from Yotam and Or enhances mlx5 to support FW flashing
through the mlxfw module, in a similar manner done by the mlxsw driver.
Currently, only ethtool based flashing is implemented, where both Eth and IB ports
are supported.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agocxgb4: Use Firmware params to get buffer-group map
Arjun Vynipadath [Fri, 23 Jun 2017 13:44:37 +0000 (19:14 +0530)]
cxgb4: Use Firmware params to get buffer-group map

Buffer group mappings can be obtained using FW_PARAMs cmd for newer FW.

Since some of the bg_maps are obtained in atomic context, created another
t4_query_params_ns(), that wont sleep when awaiting mbox cmd completion.

Signed-off-by: Casey Leedom <leedom@chelsio.com>
Signed-off-by: Arjun Vynipadath <arjun@chelsio.com>
Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agocxgb4: Update T6 Buffer Group and Channel Mappings
Arjun Vynipadath [Fri, 23 Jun 2017 13:44:36 +0000 (19:14 +0530)]
cxgb4: Update T6 Buffer Group and Channel Mappings

We were using t4_get_mps_bg_map() for both t4_get_port_stats()
to determine which MPS Buffer Groups to report statistics on for a given
Port, and also for t4_sge_alloc_rxq() to provide a TP Ingress Channel
Congestion Map.  For T4/T5 these are actually the same values (because they
are ~somewhat~ related), but for T6 they should return different values
(T6 has Port 0 associated with MPS Buffer Group 0 (with MPS Buffer Group 1
silently cascading off) and Port 1 is associated with MPS Buffer Group 2
(with 3 cascading off)).

Based on the original work by Casey Leedom <leedom@chelsio.com>
Signed-off-by: Arjun Vynipadath <arjun@chelsio.com>
Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agotls: return -EFAULT if copy_to_user() fails
Dan Carpenter [Fri, 23 Jun 2017 10:15:44 +0000 (13:15 +0300)]
tls: return -EFAULT if copy_to_user() fails

The copy_to_user() function returns the number of bytes remaining but we
want to return -EFAULT here.

Fixes: 3c4d7559159b ("tls: kernel TLS support")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Dave Watson <davejwatson@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agoMerge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec...
David S. Miller [Fri, 23 Jun 2017 18:17:31 +0000 (14:17 -0400)]
Merge branch 'master' of git://git./linux/kernel/git/klassert/ipsec-next

Steffen Klassert says:

====================
pull request (net-next): ipsec-next 2017-06-23

1) Use memdup_user to spmlify xfrm_user_policy.
   From Geliang Tang.

2) Make xfrm_dev_register static to silence a sparse warning.
   From Wei Yongjun.

3) Use crypto_memneq to check the ICV in the AH protocol.
   From Sabrina Dubroca.

4) Remove some unused variables in esp6.
   From Stephen Hemminger.

5) Extend XFRM MIGRATE to allow to change the UDP encapsulation port.
   From Antony Antony.

6) Include the UDP encapsulation port to km_migrate announcements.
   From Antony Antony.

Please pull or let me know if there are problems.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agoMerge branch 'ena-new-features-and-improvements'
David S. Miller [Fri, 23 Jun 2017 18:15:12 +0000 (14:15 -0400)]
Merge branch 'ena-new-features-and-improvements'

Netanel Belgazal says:

====================
net: update ena ethernet driver to version 1.2.0

This patchset contains some new features/improvements that were added
to the ENA driver to increase its robustness and are based on
experience of wide ENA deployment.

Change log:

V2:
* Remove patch that add inline to C-file static function (contradict coding style).
* Remove patch that moves MTU parameter validation in ena_change_mtu() instead of
using the network stack.
* Use upper_32_bits()/lower_32_bits() instead of casting.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agonet: ena: update ena driver to version 1.2.0
Netanel Belgazal [Fri, 23 Jun 2017 08:22:00 +0000 (11:22 +0300)]
net: ena: update ena driver to version 1.2.0

Signed-off-by: Netanel Belgazal <netanel@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agonet: ena: update driver's rx drop statistics
Netanel Belgazal [Fri, 23 Jun 2017 08:21:59 +0000 (11:21 +0300)]
net: ena: update driver's rx drop statistics

rx drop counter is reported by the device in the keep-alive
event.
update the driver's counter with the device counter.

Signed-off-by: Netanel Belgazal <netanel@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agonet: ena: use lower_32_bits()/upper_32_bits() to split dma address
Netanel Belgazal [Fri, 23 Jun 2017 08:21:58 +0000 (11:21 +0300)]
net: ena: use lower_32_bits()/upper_32_bits() to split dma address

In ena_com_mem_addr_set(), use the above functions to split dma address
to the lower 32 bits and the higher 16 bits.

Signed-off-by: Netanel Belgazal <netanel@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agonet: ena: separate skb allocation to dedicated function
Netanel Belgazal [Fri, 23 Jun 2017 08:21:57 +0000 (11:21 +0300)]
net: ena: separate skb allocation to dedicated function

Signed-off-by: Netanel Belgazal <netanel@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agonet: ena: use napi_schedule_irqoff when possible
Netanel Belgazal [Fri, 23 Jun 2017 08:21:56 +0000 (11:21 +0300)]
net: ena: use napi_schedule_irqoff when possible

Signed-off-by: Netanel Belgazal <netanel@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agonet: ena: allow the driver to work with small number of msix vectors
Netanel Belgazal [Fri, 23 Jun 2017 08:21:55 +0000 (11:21 +0300)]
net: ena: allow the driver to work with small number of msix vectors

Current driver tries to allocate msix vectors as the number of the
negotiated io queues. (with another msix vector for management).
If pci_alloc_irq_vectors() fails, the driver aborts the probe
and the ENA network device is never brought up.

With this patch, the driver's logic will reduce the number of IO
queues to the number of allocated msix vectors (minus one for management)
instead of failing probe().

Signed-off-by: Netanel Belgazal <netanel@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agonet: ena: add support for out of order rx buffers refill
Netanel Belgazal [Fri, 23 Jun 2017 08:21:54 +0000 (11:21 +0300)]
net: ena: add support for out of order rx buffers refill

ENA driver post Rx buffers through the Rx submission queue
for the ENA device to fill them with receive packets.
Each Rx buffer is marked with req_id in the Rx descriptor.

Newer ENA devices could consume the posted Rx buffer in out of order,
and as result the corresponding Rx completion queue will have Rx
completion descriptors with non contiguous req_id(s)

In this change the driver holds two rings.
The first ring (called free_rx_ids) is a mapping ring.
It holds all the unused request ids.
The values in this ring are from 0 to ring_size -1.

When the driver wants to allocate a new Rx buffer it uses the head of
free_rx_ids and uses it's value as the index for rx_buffer_info ring.
The req_id is also written to the Rx descriptor

Upon Rx completion,
The driver took the req_id from the completion descriptor and uses it
as index in rx_buffer_info.
The req_id is then return to the free_rx_ids ring.

This patch also adds statistics to inform when the driver receive out
of range or unused req_id.

Note:
free_rx_ids is only accessible from the napi handler, so no locking is
required

Signed-off-by: Netanel Belgazal <netanel@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agonet: ena: add reset reason for each device FLR
Netanel Belgazal [Fri, 23 Jun 2017 08:21:53 +0000 (11:21 +0300)]
net: ena: add reset reason for each device FLR

For each device reset, log to the device what is the cause
the reset occur.

Signed-off-by: Netanel Belgazal <netanel@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agonet: ena: change sizeof() argument to be the type pointer
Netanel Belgazal [Fri, 23 Jun 2017 08:21:52 +0000 (11:21 +0300)]
net: ena: change sizeof() argument to be the type pointer

Instead of using:
memset(ptr, 0x0, sizeof(struct ...))
use:
memset(ptr, 0x0, sizeor(*ptr))

Signed-off-by: Netanel Belgazal <netanel@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agonet: ena: add hardware hints capability to the driver
Netanel Belgazal [Fri, 23 Jun 2017 08:21:51 +0000 (11:21 +0300)]
net: ena: add hardware hints capability to the driver

With this patch, ENA device can update the ena driver about
the desired timeout values:
These values are part of the "hardware hints" which are transmitted
to the driver as Asynchronous event through ENA async
event notification queue.

In case the ENA device does not support this capability,
the driver will use its own default values.

Signed-off-by: Netanel Belgazal <netanel@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agonet: ena: change return value for unsupported features unsupported return value
Netanel Belgazal [Fri, 23 Jun 2017 08:21:50 +0000 (11:21 +0300)]
net: ena: change return value for unsupported features unsupported return value

return -EOPNOTSUPP instead of -EPERM.

Signed-off-by: Netanel Belgazal <netanel@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agotcp: fix out-of-bounds access in ULP sysctl
Jakub Kicinski [Fri, 23 Jun 2017 01:57:55 +0000 (18:57 -0700)]
tcp: fix out-of-bounds access in ULP sysctl

KASAN reports out-of-bound access in proc_dostring() coming from
proc_tcp_available_ulp() because in case TCP ULP list is empty
the buffer allocated for the response will not have anything
printed into it.  Set the first byte to zero to avoid strlen()
going out-of-bounds.

Fixes: 734942cc4ea6 ("tcp: ULP infrastructure")
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agobpf: possibly avoid extra masking for narrower load in verifier
Yonghong Song [Thu, 22 Jun 2017 22:07:39 +0000 (15:07 -0700)]
bpf: possibly avoid extra masking for narrower load in verifier

Commit 31fd85816dbe ("bpf: permits narrower load from bpf program
context fields") permits narrower load for certain ctx fields.
The commit however will already generate a masking even if
the prog-specific ctx conversion produces the result with
narrower size.

For example, for __sk_buff->protocol, the ctx conversion
loads the data into register with 2-byte load.
A narrower 2-byte load should not generate masking.
For __sk_buff->vlan_present, the conversion function
set the result as either 0 or 1, essentially a byte.
The narrower 2-byte or 1-byte load should not generate masking.

To avoid unnecessary masking, prog-specific *_is_valid_access
now passes converted_op_size back to verifier, which indicates
the valid data width after perceived future conversion.
Based on this information, verifier is able to avoid
unnecessary marking.

Since we want more information back from prog-specific
*_is_valid_access checking, all of them are packed into
one data structure for more clarity.

Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agonet: stmmac: make some functions static
Colin Ian King [Thu, 22 Jun 2017 16:17:29 +0000 (17:17 +0100)]
net: stmmac: make some functions static

The functions dwmac4_dma_init_rx_chan, dwmac4_dma_init_tx_chan and
dwmac4_dma_init_channel do not need to be in global scope, so them
static.

Cleans up sparse warnings:
"symbol 'dwmac4_dma_init_rx_chan' was not declared. Should it be static?"
"symbol 'dwmac4_dma_init_tx_chan' was not declared. Should it be static?"
"symbol 'dwmac4_dma_init_channel' was not declared. Should it be static?"

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agoMerge branch 'xdp-offload-mode'
David S. Miller [Fri, 23 Jun 2017 17:42:21 +0000 (13:42 -0400)]
Merge branch 'xdp-offload-mode'

Jakub Kicinski says:

====================
xdp: offload mode

While we discuss the representors.. :)

This set adds XDP flag for forcing offload and a attachment mode
for reporting to user space that program has been offloaded.  The
nfp driver is modified to make use of the new flags, but also to
adhere to the DRV_MODE flag which should disable the HW offload.

The intended driver behaviour is:
            DRV mode   offload
no flags      yes     attempted
DRV_MODE      yes        no
 HW_MODE      no         yes

Where 'yes' means required, and error will be returned if setup fails.
'Attempted' means the offload will only happen automatically if HW is
capable and offloading the program will cause no change in system
behaviour (e.g. maps don't have to bound).

Thanks to loading the program both to the driver and HW by default we
can fallback to the driver mode without disruption in case user replaces
the program with one which cannot be offloaded later.

Note that the NFP driver currently claims XDP offload support but
lacks most basic features like direct packet access.

Only change compared to the RFC is fixing the double bpf_prog_put()
which Daniel has spotted (patch 5).
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agonfp: xdp: report if program is offloaded
Jakub Kicinski [Thu, 22 Jun 2017 01:25:10 +0000 (18:25 -0700)]
nfp: xdp: report if program is offloaded

Make use of just added XDP_ATTACHED_HW.

Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agoxdp: add reporting of offload mode
Jakub Kicinski [Thu, 22 Jun 2017 01:25:09 +0000 (18:25 -0700)]
xdp: add reporting of offload mode

Extend the XDP_ATTACHED_* values to include offloaded mode.
Let drivers report whether program is installed in the driver
or the HW by changing the prog_attached field from bool to
u8 (type of the netlink attribute).

Exploit the fact that the value of XDP_ATTACHED_DRV is 1,
therefore since all drivers currently assign the mode with
double negation:
       mode = !!xdp_prog;
no drivers have to be modified.

Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agonfp: bpf: add support for XDP_FLAGS_HW_MODE
Jakub Kicinski [Thu, 22 Jun 2017 01:25:08 +0000 (18:25 -0700)]
nfp: bpf: add support for XDP_FLAGS_HW_MODE

Respect the XDP_FLAGS_HW_MODE.  When it's set install the program
on the NIC and skip enabling XDP in the driver.

Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agonfp: bpf: release the reference on offloaded programs
Jakub Kicinski [Thu, 22 Jun 2017 01:25:07 +0000 (18:25 -0700)]
nfp: bpf: release the reference on offloaded programs

The xdp_prog member of the adapter's data path structure is used
for XDP in driver mode.  In case a XDP program is loaded with in
HW-only mode, we need to store it somewhere else.  Add a new XDP
prog pointer in the main structure and use that when we need to
know whether any XDP program is loaded, not only a driver mode
one.  Only release our reference on adapter free instead of
immediately after netdev unregister to allow offload to be disabled
first.

Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agonfp: bpf: don't offload XDP programs in DRV_MODE
Jakub Kicinski [Thu, 22 Jun 2017 01:25:06 +0000 (18:25 -0700)]
nfp: bpf: don't offload XDP programs in DRV_MODE

DRV_MODE means that user space wants the program to be run in
the driver.  Do not try to offload.  Only offload if no mode
flags have been specified.

Remember what the mode is when the program is installed and refuse
new setup requests if there is already a program loaded in a
different mode.  This should leave it open for us to implement
simultaneous loading of two programs - one in the drv path and
another to the NIC later.

Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agonfp: xdp: move driver XDP setup into a separate function
Jakub Kicinski [Thu, 22 Jun 2017 01:25:05 +0000 (18:25 -0700)]
nfp: xdp: move driver XDP setup into a separate function

In preparation of XDP offload flags move the driver setup into
a function.  Otherwise the number of conditions in one function
would make it slightly hard to follow.  The offload handler may
now be called with NULL prog, even if no offload is currently
active, but that's fine, offload code can handle that.

Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agoxdp: add HW offload mode flag for installing programs
Jakub Kicinski [Thu, 22 Jun 2017 01:25:04 +0000 (18:25 -0700)]
xdp: add HW offload mode flag for installing programs

Add an installation-time flag for requesting that the program
be installed only if it can be offloaded to HW.

Internally new command for ndo_xdp is added, this way we avoid
putting checks into drivers since they all return -EINVAL on
an unknown command.

Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agoxdp: pass XDP flags into install handlers
Jakub Kicinski [Thu, 22 Jun 2017 01:25:03 +0000 (18:25 -0700)]
xdp: pass XDP flags into install handlers

Pass XDP flags to the xdp ndo.  This will allow drivers to look
at the mode flags and make decisions about offload.

Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agoudp: fix poll()
Paolo Abeni [Fri, 23 Jun 2017 12:19:51 +0000 (14:19 +0200)]
udp: fix poll()

Michael reported an UDP breakage caused by the commit b65ac44674dd
("udp: try to avoid 2 cache miss on dequeue").
The function __first_packet_length() can update the checksum bits
of the pending skb, making the scratched area out-of-sync, and
setting skb->csum, if the skb was previously in need of checksum
validation.

On later recvmsg() for such skb, checksum validation will be
invoked again - due to the wrong udp_skb_csum_unnecessary()
value - and will fail, causing the valid skb to be dropped.

This change addresses the issue refreshing the scratch area in
__first_packet_length() after the possible checksum update.

Fixes: b65ac44674dd ("udp: try to avoid 2 cache miss on dequeue")
Reported-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agoudp/v6: prefetch rmem_alloc in udp6_queue_rcv_skb()
Paolo Abeni [Thu, 22 Jun 2017 13:01:22 +0000 (15:01 +0200)]
udp/v6: prefetch rmem_alloc in udp6_queue_rcv_skb()

very similar to commit dd99e425be23 ("udp: prefetch
rmem_alloc in udp_queue_rcv_skb()"), this allows saving a cache
miss when the BH is bottle-neck for UDP over ipv6 packet
processing, e.g. for small packets when a single RX NIC ingress
queue is in use.

Performances under flood when multiple NIC RX queues used are
unaffected, but when a single NIC rx queue is in use, this
gives ~8% performance improvement.

Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agoMerge branch 'net-mvpp2-misc-improvements'
David S. Miller [Thu, 22 Jun 2017 17:42:57 +0000 (13:42 -0400)]
Merge branch 'net-mvpp2-misc-improvements'

Thomas Petazzoni says:

====================
net: mvpp2: misc improvements

Here are a few patches making various small improvements/refactoring
in the mvpp2 driver. They are based on today's net-next.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agonet: mvpp2: remove mvpp2_pool_refill()
Thomas Petazzoni [Thu, 22 Jun 2017 12:23:20 +0000 (14:23 +0200)]
net: mvpp2: remove mvpp2_pool_refill()

When all a function does is calling another function with the exact same
arguments, in the exact same order, you know it's time to remove said
function. Which is exactly what this commit does.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agonet: mvpp2: remove unused mvpp2_bm_cookie_pool_set() function
Thomas Petazzoni [Thu, 22 Jun 2017 12:23:19 +0000 (14:23 +0200)]
net: mvpp2: remove unused mvpp2_bm_cookie_pool_set() function

This function is not used in the driver, remove it.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agonet: mvpp2: add comments about smp_processor_id() usage
Thomas Petazzoni [Thu, 22 Jun 2017 12:23:18 +0000 (14:23 +0200)]
net: mvpp2: add comments about smp_processor_id() usage

A previous commit modified a number of smp_processor_id() used in
migration-enabled contexts into get_cpu/put_cpu sections. However, a few
smp_processor_id() calls remain in the driver, and this commit adds
comments explaining why they can be kept.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agoMerge branch 'stmmac-pci-Refactor-DMI-probing'
David S. Miller [Thu, 22 Jun 2017 17:39:58 +0000 (13:39 -0400)]
Merge branch 'stmmac-pci-Refactor-DMI-probing'

Jan Kiszka says:

====================
stmmac: pci: Refactor DMI probing

Some cleanups of the way we probe DMI platforms in the driver. Reduces
a bit of open-coding and makes the logic easier reusable for any
potential DMI platform != Quark.

Tested on IOT2000 and Galileo Gen2.

Changes in v5:
 - fixed a remaining issue in patch 5
 - dropped patch 6 for now
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agostmmac: pci: Use dmi_system_id table for retrieving PHY addresses
Jan Kiszka [Thu, 22 Jun 2017 06:18:01 +0000 (08:18 +0200)]
stmmac: pci: Use dmi_system_id table for retrieving PHY addresses

Avoids reimplementation of DMI matching in stmmac_pci_find_phy_addr.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agostmmac: pci: Select quark_pci_dmi_data from quark_default_data
Jan Kiszka [Thu, 22 Jun 2017 06:18:00 +0000 (08:18 +0200)]
stmmac: pci: Select quark_pci_dmi_data from quark_default_data

No need to carry this reference in stmmac_pci_info - the Quark-specific
setup handler knows that it needs to use the Quark-specific DMI table.
This also allows to drop the stmmac_pci_info reference from the setup
handler parameter list.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agostmmac: pci: Make stmmac_pci_find_phy_addr truly generic
Jan Kiszka [Thu, 22 Jun 2017 06:17:59 +0000 (08:17 +0200)]
stmmac: pci: Make stmmac_pci_find_phy_addr truly generic

Move the special case for the early Galileo firmware into
quark_default_setup. This allows to use stmmac_pci_find_phy_addr for
non-quark cases.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agostmmac: pci: Use stmmac_pci_info for all devices
Jan Kiszka [Thu, 22 Jun 2017 06:17:58 +0000 (08:17 +0200)]
stmmac: pci: Use stmmac_pci_info for all devices

Make stmmac_default_data compatible with stmmac_pci_info.setup and use
an info structure for all devices. This allows to make the probing more
regular.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agostmmac: pci: Make stmmac_pci_info structure constant
Jan Kiszka [Thu, 22 Jun 2017 06:17:57 +0000 (08:17 +0200)]
stmmac: pci: Make stmmac_pci_info structure constant

By removing the PCI device reference from the structure and passing it
as parameters to the interested functions, we can make quark_pci_info
const.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>