V4L/DVB (11437): pvrusb2: Drop client_register/unregister stubs

The client_register and client_unregister methods are optional so
there is no point in defining stub ones. Especially when these methods
are likely to be removed soon.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (11436): radio-mr800: convert to to v4l2_device

radio-mr800: convert to to v4l2_device.

Signed-off-by: Alexey Klimov <klimov.linux@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (11435): dsbr100 radio: convert to to v4l2_device

dsbr100: convert to v4l2_device.

Signed-off-by: Alexey Klimov <klimov.linux@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB: zr364xx: remove unused #include <version.h>

Remove unused #include <version.h> in drivers/media/video/zr364xx.c.

Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB: usbvision: remove unused #include <version.h>

Remove unused #include <version.h> in
drivers/media/video/usbvision/usbvision-i2c.c.

Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (11427): gspca - m5602: Minor cleanups

Remove an unnecessary error check and reorder some code.

Signed-off-by: Erik Andr?n <erik.andren@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (11426): gspca - m5602: Don't touch hflip/vflip register on Read/Modify/Write

Touching the hflip/vflip register while doing the read/modify/write corrupts the image. Just read from the sensor ctrl cache instead and all is good.

Signed-off-by: Erik Andr?n <erik.andren@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (11425): gspca - m5602: Move the vflip quirk to probe stage.

The vflip quirk is better checked at probe time as it's only needed once.
Also add an extra reset at init time to resolve a suspend to ram regression.

Signed-off-by: Erik Andr?n <erik.andren@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (11424): gspca - m5602-ov9650: Use the local ctrl cache. Adjust image on vflip.

Signed-off-by: Erik Andr?n <erik.andren@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (11423): gspca - m5602-ov9650: Add a disconnect hook, setup a ctrl cache ctrl.

Reading and writing to a register doesn't always work reliably. Add a cache
and ensure that it is deallocated properly upon module disconnect.

Signed-off-by: Erik Andr?n <erik.andren@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (11422): gspca - m5602-ov9650: Replace a magic constant with a define

Signed-off-by: Erik Andr?n <erik.andren@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (11421): gspca - m5602-ov9650: Synthesize modesetting.

Previously all resolution setting was done with precalculated tables.
When the image is vflipped we need to adjust the alignment which would
require another table. Now we can adjust the parameters on the fly instead.

Signed-off-by: Erik Andr?n <erik.andren@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (11420): gspca - m5602: Improve error handling in the ov9650 driver

Some errors were not propagated properly.

Signed-off-by: Erik Andrén <erik.andren@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (11419): gspca - m5602-ov9650: Don't read exposure data from COM1.

ov9650: Reading the COM1 register corrupts the image.
Decrease the granularity of the exposure and limit its upper range
as setting such high values doesn't have any effect on the image.

Signed-off-by: Erik Andr?n <erik.andren@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (11418): gspca - m5602-ov9650: Auto white balancing is on by default

Signed-off-by: Erik Andr?n <erik.andren@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (11417): gspca - m5602-ov9650: Autogain is on by default

Autogain is on by default, properly set the default value in the v4l2 ctrl.

Signed-off-by: Erik Andr?n <erik.andren@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (11416): gspca - m5602: Constify all sensor structs

Signed-off-by: Erik Andrén <erik.andren@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (11415): gspca - m5602: Remove an unused member in the sd struct.

Remove an unused sd struct member. Remove a redundant define while we're at it.

Signed-off-by: Erik Andrén <erik.andren@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (11414): gspca - m5602-mt9m111: Move v4l2 controls to main sensor file.

Move over the v4l2 controls to the sensor specific source file.
Remove the now redundant sensor struct member.

Signed-off-by: Erik Andrén <erik.andren@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (11413): gspca - m5602-mt9m111: Separate mode vectors per sensor.

By separating the supported for each sensor into a separate vector we can
eliminate the nmodes variable and instead calculate it at runtime.

Signed-off-by: Erik Andr?n <erik.andren@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (11412): gspca - m5602-ov9650: Checkpatch fixes

Signed-off-by: Erik Andrén <erik.andren@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (11411): gspca - m5602: Rework v4l ctrl handling in all sensors

Previously, all sensors allocated a part of a large ctrl vector.
Define this vector separately for each sensor instead.

Signed-off-by: Erik Andrén <erik.andren@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (11410): gspca - m5602-ov9650: Always init the ov9650 before starting a stream

This is a hack preventing a suspend-to-ram/disk regression.

Signed-off-by: Erik Andrén <erik.andren@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (11409): gspca - m5602-ov9650: Set the ov9650 sensor in soft sleep when inactive.

In order to save energy, put the sensor in soft sleep mode when not active

Signed-off-by: Erik Andrén <erik.andren@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (11408): gspca - m5602-s5k83a: Add led support to the s5k83a sensor.

This patch toggles the led seen on many laptops having a m5602 connected
to a Samsung s5k83a sensor.

Signed-off-by: Lukas Karas <lukas.karas@centrum.cz>
Signed-off-by: Erik Andr?n <erik.andren@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (11407): gspca - m5602-ov9650: Clean up ov9650_start() function.

Cleans some unnecessary temporary variable usage in the ov9650 start function.

Signed-off-by: Erik Andr?n <erik.andren@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (11406): gspca - m5602-ov9650: Add QCIF resolution support

Adds QCIF support for the ov9650 sensor

Signed-off-by: Erik Andr?n <erik.andren@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (11405): gspca - m5602: Simplify error handling

Simplfy error handling by replacing goto statements with return equivalents.

Signed-off-by: Erik Andr?n <erik.andren@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (11404): gspca - m5602-s5k4aa: Add start function and VGA resolution init.

Signed-off-by: Erik Andr?n <erik.andren@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (11403): gspca - m5602-s5k4aa: No more "default" mode

Signed-off-by: Erik Andr?n <erik.andren@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (11402): gspca - vc032x: Remove the JPEG tables of mi1320_soc.

Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

Revert "V4L/DVB (10962): fired-avc: fix printk formatting warning."

Commit 34aecd2851bba5c2b7dae2f0dbe8e629b1c5e4ac was made obsolete
and invalid by commit 40cf65d149053889c8876c6c2b4ce204fde55baa.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (11398): Support for Legend Silicon LGS8913/LGS8GL5/LGS8GXX China DMB-TH digital demodulator

This patch contains the unified driver for Legend Silicon LGS8913 and
LGS8GL5. It should replace lgs8gl5.c in media/dvb/frontends in the future.

Signed-off-by: David T.L. Wong <davidtlwong@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (11393): radio-si470x: fix possible bug with freeing memory order

Patch fixes cleanup procedure in si470x_usb_driver_probe. Add new label
err_video and change order of freeing memory.

Signed-off-by: Alexey Klimov <klimov.linux@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (11392): patch: s2255drv driver removal problem fixed

This patch fixes kfree problem on driver removal, fixes streamoff problem
and removes unnecessary videobuf_waiton from free_buffer function.

Signed-off-by: Dean Anderson <dean@sensoray.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (11392a): Remove reference to obsolete linux-dvb@linuxtv.org

linux-dvb@linuxtv.org auto-responds with:

| This ML is deprecated. Please use linux-media@vger.kernel.org instead.
| For more info about linux-media@vger.kernel.org, please read:
| http://vger.kernel.org/vger-lists.html#linux-media

Hence remove it from MAINTAINERS.

There are still a few references to it in various docs and source files
With kind regards,
Geert Uytterhoeven
Software Architect
Sony Techsoft Centre Europe
The Corporate Village · Da Vincilaan 7-D1 · B-1935 Zaventem · Belgium
Phone:    +32 (0)2 700 8453
Fax:      +32 (0)2 700 8622
E-mail:   Geert.Uytterhoeven@sonycom.com
Internet: http://www.sony-europe.com/
A division of Sony Europe (Belgium) N.V.
VAT BE 0413.825.160 · RPR Brussels
Fortis · BIC GEBABEBB · IBAN BE41293037680010
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (11391): pci-isa radios: remove open and release functions

Patch removes empty open and release functions in pci and isa radio
drivers, setting them to NULL. V4L module doesn't call for them due to
previous patch.

Signed-off-by: Alexey Klimov <klimov.linux@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (11390): 2-dev.c: return 0 for NULL open and release callbacks

Patch allows v4l2_open and v4l2_release functions return 0 if open and
release driver callbacks set to NULL. This will be used in radio
drivers.

--

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Alexey Klimov <klimov.linux@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (11387): Sensor orientation reporting

Add support to the SQ-905 driver to pass back to user space the
sensor orientation information obtained from the camera during init.
Modifies gspca and the videodev2.h header to create the necessary
API.

[mchehab@redhat.com: Changed "Output is" to "Frames are" at the comments, as suggested at LMML]
Signed-off-by: Adam Baker <linux@baker-net.org.uk>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (11386): saa7134: Add analog RF tuner support for Avermedia A700 DVB-S Hybrid+FM card

Thanks to panagonov <panagonov@mail.bg> for requesting support and
testing patches.

Signed-off-by: Matthias Schwarzott <zzam@gentoo.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (11381): ivtv/cx18: remove VIDIOC_INT_S_AUDIO_ROUTING debug support.

Remove support for the debug call VIDIOC_INT_S_AUDIO_ROUTING from cx18
and ivtv. These internal ioctls shouldn't be exposed. These were only
used through the cx18-ctl and ivtv-ctl utilities, and only when testing
a new card variant.

This cleanup allows the removal of this ioctl from v4l2-common.h.

Cc: Andy Walls <awalls@radix.net>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (11380): v4l2-subdev: change s_routing prototype

It is no longer needed to use a struct pointer as argument, since v4l2_subdev
doesn't require that ioctl-like approach anymore. Instead just pass the input,
output and config (new!) arguments directly.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (11379): mxb: fix copy-and-paste bug in mute.

The line-in was muted twice instead of the line-in and the cd-in.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (11377): v4l: increase version numbers of drivers converted to v4l2_subdev.

With all the v4l2_subdev changes that were made to these drivers it is a
good idea to increase the version number of each driver.

It's just the patch level that is increased, except for the zoran and saa7146
drivers where the minor number was increased due to the more substantial
changes that were made to those two drivers.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (11376): tvaudio.h: add static inline to retrieve the list of possible i2c addrs.

Rather than duplicating this list everywhere, just put it in tvaudio.h.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (11375): v4l2: use v4l2_i2c_new_probed_subdev_addr where appropriate.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (11373): v4l2-common: add explicit v4l2_device pointer as first arg to new_(probed)_subdev

The functions v4l2_i2c_new_subdev and v4l2_i2c_new_probed_subdev relied on
i2c_get_adapdata to return the v4l2_device. However, this is not always
possible on embedded platforms. So modify the API to pass the v4l2_device
pointer explicitly.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (11374): v4l2-common: add v4l2_i2c_new_probed_subdev_addr

Add utility function to probe for a single address, rather than a list
of addresses.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (11372): v4l2: use old-style i2c API for kernels < 2.6.26 instead of < 2.6.22

Originally the intention was to switch to the new style i2c API starting with
the introduction of the API in 2.6.22. However, the i2c_new_probed_device()
function has a lethal bug that wasn't fixed until 2.6.25. Or more accurately,
it was only fixed in the stable series of 2.6.25 and 2.6.26.

Given the fact that the new i2c API also changed starting with 2.6.26 (the
addition of i2c_device_id), it is easiest to switch APIs starting with
2.6.26.

This patch updates all the legacy code accordingly.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (11371): v4l2: remove legacy fields in v4l2-i2c-drv.h.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (11370): v4l2-subdev: move s_std from tuner to core.

s_std didn't belong in the tuner ops. Stricly speaking it should be part of
the video ops, but it is used by audio and tuner devices as well, so it is
more efficient to make it part of the core ops.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (11369): v4l2-subdev: add load_fw and use that instead of abusing core->init.

The init callback was used in several places to load firmware. Make a separate
load_fw callback for that. This makes the code a lot more understandable.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (11368): v4l2-subdev: move s_standby from core to tuner.

s_standby is only used to put the tuner in powersaving mode, so move it
from core to tuner.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (11367): v4l2-common: remove legacy code

Now that all drivers are converted to v4l2_subdev we can remove legacy code
in v4l2-common. Also move the documentation of the internal API to
v4l2-subdev.h where it really belongs.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (11366): v4l: remove obsolete header and source

v4l2-subdev.c and v4l2-i2c-drv-legacy.h were used to support the old i2c
API. All v4l drivers are now converted to v4l2_subdev, so these two files
can be removed.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (11365): tvaudio: remove i2c legacy code

All drivers that use tvaudio now use v4l2_subdev, so we can remove the
legacy code from tvaudio.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (11364): tuner: remove i2c legacy code.

All drivers that use the tuner module now use v4l2_subdev, so we can remove the
legacy code from this module.

Note that TUNER_SET_CONFIG is still called by tuner-simple.c, so we have
to handle it via a .command callback. There must be a better way to do this,
but for now this will work.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (11363): tvp5150: remove i2c legacy code.

All drivers that use tvp5150 now use v4l2_subdev, so we can remove the
legacy code from tvp5150.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (11362): saa7115: remove i2c legacy code

All drivers that use saa7115 now use v4l2_subdev, so we can remove the
legacy code from saa7115.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (11361): msp3400: remove i2c legacy code

All drivers that use msp3400 now use v4l2_subdev, so we can remove the
legacy code from msp3400.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (11360): em28xx: use usb_interface.dev for v4l2_device_register

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (11358): w9968cf: use usb_interface.dev for v4l2_device_register

Signed-off-by: Janne Grunau <j@jannau.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (11357): au0828: remove explicitly set v4l2_device.name and unused au0828_instance

Signed-off-by: Janne Grunau <j@jannau.net>
Acked-by: Devin Heitmueller <devin.heitmueller@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (11356): au0828: use usb_interface.dev for v4l2_device_register

Signed-off-by: Janne Grunau <j@jannau.net>
Acked-by: Devin Heitmueller <devin.heitmueller@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (11355): pvrusb2: use usb_interface.dev for v4l2_device_register

Signed-off-by: Janne Grunau <j@jannau.net>
Acked-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (11354): usbvision: use usb_interface.dev for v4l2_device_register

Signed-off-by: Janne Grunau <j@jannau.net>
Acked-by: Thierry Merle <thierry.merle@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (11353): cx231xx: remove explicitly set v4l2_device.name

Signed-off-by: Janne Grunau <j@jannau.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (11352): cx231xx: use usb_interface.dev for v4l2_device_register

Signed-off-by: Janne Grunau <j@jannau.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (11250): cx231xx: Fix Kconfig help items

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (11135): cx231xx: use usb_make_path() for bus_info

VIDIOC_QUERYCAP should return the proper bus info. In the case of USB, this
should be generated by usb_make_path(), being something like:
usb-0000:00:1d.7-2

Cc: Srinivasa Deevi <srinivasa.deevi@conexant.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (11134): cx231xx: dmesg cleanup

Remove some printk's that were needed only during development phase. Also,
cleans the printed messages to produce a nicer result.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (11133): cx231xx: don't print pcb config debug messages by default

Cc: Srinivasa Deevi <srinivasa.deevi@conexant.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (11132): cx231xx: usb probe cleanups

Simplifies the usb probe logic, cleaning the printed messages during the probing
phase.

Cc: Srinivasa Deevi <srinivasa.deevi@conexant.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (11131): cx231xx: avoid trying to access unfilled dev struct

cx231xxinfo needs dev->name. However, this is not declared on the time the
check for the max number of supported devices is done.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (11130): cx231xx: fix an inverted logic at vidioc_streamoff

Cc: Srinivasa Deevi <srinivasa.deevi@conexant.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (11129): cx231xx: Use generic names for each device block

Signed-off-by: Srinivasa Deevi <srinivasa.deevi@conexant.com>
Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (11128): cx231xx: convert the calls to subdev format

This patch converts cx231xx to the new v4l2 dev/subdev, doing:
 - Conversion of i2c calls to subdev calls;
 - all subdev calls to call_all();
 - Corrected the header file order in cx231xx.h;
 - Added tuner frequency setting.

Signed-off-by: Srinivasa Deevi <srinivasa.deevi@conexant.com>
Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (11038): Fix the issue with audio module & correction of Names

The audio module requested in driver differs with module
created by Makefile. Makefile is corrected to create the same module name
required by driver. Also, corrected the strings that shows wrong name.

Signed-off-by: Srinivasa Deevi <srinivasa.deevi@conexant.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (10989): cx25840: cx23885 detection was broken

An earlier commit accidentally broke the detection of the cx25837 part of
the cx23885. Reinstated the commented out code.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (10982): cx231xx: fix compile warning

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (10958): cx231xx: some additional CodingStyle and minor fixes

changed the pcb-config.c/h to pcb-cfg.c/h for short names.

Signed-off-by: Srinivasa Deevi <srinivasa.deevi@conexant.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (10957): cx231xx: Fix CodingStyle

Fixes several CodingStyle issues on the driver.

Signed-off-by: Srinivasa Deevi <srinivasa.deevi@conexant.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (10957a): cx231xx: Fix compilation breakage

Only cx231xx-video needs linux/version.h, due to KERNEL_VERSION macro,
that is used by V4L2 API.

This patch moves the KERNEL_VERSION to its proper place and starts with
0,0,1.

There are still much more to be fixed on later patches

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (10956): cx231xx: First series of manual CodingStyle fixes

This patch cleans up CodingStyle on the following source files:

There are still much more to be fixed on later patches

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (10955): cx231xx: CodingStyle automatic fixes with Lindent

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (10954): Add cx231xx USB driver

Signed-off-by: Srinivasa Deevi <srinivasa.deevi@conexant.com>
[mchehab@redhat.com: Remove the Kconfig changes, to avoid git breakages]
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (10953): cx25840: Fix CodingStyle errors introduced by the last patch

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (10952): cx25840: prepare it to be used by cx231xx module

cx231xx has a cx25840 inside the chip. However, some different
initializations are used for this variant.

Signed-off-by: Srinivasa Deevi <srinivasa.deevi@conexant.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (11351): v4l: use usb_interface for v4l2_device_register

If usb_interface.dev is used as dev parameter for v4l2_device_register
v4l2_dev.name contains the v4l driver/module name and usb device and
interface instead of a simple "usb x-y".
It also matches the recommendation to set the parent devices for usb
drivers.

Signed-off-by: Janne Grunau <j@jannau.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (11350): Add camera (CSI) driver for MX1

Add support for CMOS Sensor Interface on i.MX1 and i.MXL SoCs.

 create mode 100644 arch/arm/mach-mx1/ksym_mx1.c
 create mode 100644 arch/arm/mach-mx1/mx1_camera_fiq.S
 create mode 100644 arch/arm/plat-mxc/include/mach/mx1_camera.h
 create mode 100644 drivers/media/video/mx1_camera.c

Signed-off-by: Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
Signed-off-by: Darius Augulis <augulis.darius@gmail.com>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (11349): mx3-camera: adapt the clock definition and the driver to the new clock naming

With the i.MX31 transition to clkdev clock names have changed, but mistakenly
the "mx3-camera.0" has been registered with a non-NULL connection ID, which is
not necessary, since this is the only clock, used by the capture interface
driver. Fix the clock definition and the driver to use NULL as a connection ID.

Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (11347): mt9t031: use platform power hook

Use platform power hook to turn the camera on and off.

Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (11345): af9015: support for DigitalNow TinyTwin remote

Patch to provide basic support for DigitalNow TinyTwin Remote. It uses
same remote as TwinHan AzureWave AD-TU700(704J).

Signed-off-by: Stuart Hall <mailing-lists@enginuities.com>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (11343): au0828: make i2c clock speed per-board configurable

Setup the i2c clock speed to be definable on a per-board basis.  This allows
us to explicitly set the clock speed to 30 KHz on the 950q, and also gets rid
of code which sets it on a basis of what chip the i2c master is talking to
at any given time (which could have caused issues because i2c slaves should
never receive commands at a clock higher than their supported clock speed).

Signed-off-by: Devin Heitmueller <dheitmueller@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (11342): au0828: better document i2c registers

Change the #define entries for the i2c registers to be more meaningful, and
document the valid values for the registers.  Note that this changeset makes
*no* functional changes to the code.

Signed-off-by: Devin Heitmueller <dheitmueller@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (11340): af9015: add support for AverMedia AVerTV Volar Black HD (A850)

Add USB ID (07ca:850a) and configuration hack for AverMedia AVerTV Volar
Black HD (A850) DVB-T USB stick.

Tested-by: Olivier MENUEL <omenuel@laposte.net>
Tested-by: Thomas Renard <threnard@gmail.com>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (11339): af9015: remove wrong definitions

Remove wrong GPIO definitions. GPIOs used by AF9015 are property of the
AF9013 demodulator and are coming from there.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (11338): af9015: add support for TrekStor DVB-T USB Stick

Add USB ID (15a4:901b) and remote for TrekStor DVB-T USB Stick.

Signed-off-by: Marc Schneider <macke@macke.org>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (11337): af9015: add new USB ID for KWorld USB DVB-T TV Stick II (VS-DVB-T 395U)

Add new USB ID (1b80:e395) for KWorld USB DVB-T TV Stick II (VS-DVB-T 395U).
Thanks to Julian Aron Prenner <julian@linux4you.it> for reporting this.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (11336): af9015: remove experimental

Remove experimental from DVB USB AF9015 device.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>