staging: wilc1000: linux_mon: remove cast on void pointer

Remove cast on void pointer. C programming language guarantees
the conversion from void pointer to any other pointer type.

Coccinelle patch:
@r@
expression x;
void* e;
type T;
identifier f;
@@

(
  *((T *)e)
|
  ((T *)x)[...]
|
  ((T *)x)->f
|
- (T *)
  e
)

Signed-off-by: Alison Schofield <amsfield22@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: host_interface: remove cast on void pointers

Remove cast on void pointers. C programming language guarantees
the conversion from void pointer to any other pointer type.

Coccinelle patch:
@r@
expression x;
void* e;
type T;
identifier f;
@@

(
  *((T *)e)
|
  ((T *)x)[...]
|
  ((T *)x)->f
|
- (T *)
  e
)

Signed-off-by: Alison Schofield <amsfield22@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: use netdev_err instead of PRINT_ER

This patch uses netdev_err instead of PRINT_ER that is a custom debug
print.

Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: rename result in handle_set_channel

This patch renames result to ret that is used to get return value from
wilc_send_config_pkt.
Some handle_*() function are used as result, others are used as ret.
It will start to rename as ret in all handle_*() function to sync up
with this variable name.

Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: change data type of result variable to int.

result variable gets value from wilc_send_config_pkt that has
return value of int. This patch changes data type of result variable to
int.

Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: change handle_set_channel's return type to void

When handle_set_channel is called in hostIFthread that is a kernel
thread, it is not checked return type of this function. This patch
changes return type to void and removes braces if statement due
to have a single statement.

Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: define a new local variable in wilc_scan

struct scan_info is defined as a new local variable in wilc_scan
function. It makes some assignment short as well as improve more
readability.

Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: rename u8security in user_conn_req

This patch renames u8security to security to remove u8 prefix in struct
user_conn_req. There is no need to use prefix to show data type of this
variable.

Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: rename pu8ssid in struct user_conn_req

This patch renames pu8ssid to ssid to remove pu8 prefix in struct
user_conn_req. There is no need to use prefix to show data type of this
variable.

Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: rename pu8bssid in struct user_conn_req

This patch renames pu8bssid to bssid to remove pu8 prefix in struct
user_conn_req. There is no need to use prefix to show data type of this
variable.

Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: rename s8rssi in struct found_net_info

This patch renames s8rssi to rssi to remove s8 prefix in struct
found_net_info. There is no need to use prefix to show data type of this
variable.

Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: rename au8bssid in struct found_net_info

This patch renames au8bssid to bssid to remove au8 prefix. There is no
need to use prefix to show data type of this variable.

Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: rename au8bssid in struct join_bss_param

This patch renames au8bssid to bssid to remove au8 prefix in struct
join_bss_param. There is no need to use prefix to show data type of this
variable.

Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: move local var init into declaration

Improve readability by initializing local variables at declaration.

In one instance, vnt_start_interrupt_urb_complete(), also use that
local variable in subsequent switch.

Signed-off-by: Alison Schofield <amsfield22@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: replace GFP_ATOMIC with GFP_KERNEL for urb allocation

Replace GFP_ATOMIC with GFP_KERNEL during urb buffer allocation.
This makes vnt_alloc_bufs() consistent in setting GFP_KERNEL during
kmalloc() and usb_alloc_urb(). GFP_KERNEL is safe because we are in
process context, not in an interrupt handler, nor holding any spinlock.

Signed-off-by: Alison Schofield <amsfield22@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: fbtft: Remove the use of CamelCase

Rename the macro defining constant ROWxCOL into ROW_X_COL to remove
checkpatch check concerning use of CamelCase and to achieve better
readability.

CHECK: Avoid CamelCase: <ROWxCOL>

Signed-off-by: Eva Rachel Retuya <eraretuya@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: fbtft: Delete blank line after '{' brace

Omit the whitespace after '{' brace as suggested by checkpatch.

CHECK: Blank lines aren't necessary after an open brace '{'

Signed-off-by: Eva Rachel Retuya <eraretuya@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: fbtft: Insert blank line after function declaration

Insert the required whitespace after the function declaration as
suggested by checkpatch.

CHECK: Please use a blank line after function/struct/union/enum
declarations

Signed-off-by: Eva Rachel Retuya <eraretuya@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: fbtft: Fix alignment to match open parenthesis

Fix alignment issues by properly indenting function parameters in
accordance to the kernel coding style. Checkpatch pointed out this
issue.

CHECK: Alignment should match open parenthesis

Signed-off-by: Eva Rachel Retuya <eraretuya@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: fbtft: Modify block comments based on kernel coding style

Add the required trailing * on subsequent lines as well as move the */
on a separate line. Checkpatch found this issue.

Signed-off-by: Eva Rachel Retuya <eraretuya@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: lustre: obdclass: Declare function as static

Declare the function cache_stats_print as static since it is used
only  in this file. Used grep to find occurences. Problem found using
sparse.

Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: lustre: llite: Remove NULL check before kfree

NULL check before kfree is unnecessary so remove it.
Semantic patch used:
// <smpl>
@@ expression E; @@
- if (E != NULL) { kfree(E); }
+ kfree(E);
@@ expression E; @@
- if (E != NULL) { kfree(E); E = NULL; }
+ kfree(E);
+ E = NULL;
// </smpl>

Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: obdclass: Use IS_ERR_OR_NULL

Use macro IS_ERR_OR_NULL in place of tests for NULL and IS_ERR.

The Coccinelle semantic patch used to make the change is as follows:

//<smpl>
@@
expression e;
@@

- e == NULL || IS_ERR(e)
+ IS_ERR_OR_NULL(e)
//</smpl>

Signed-off-by: Amitoj Kaur Chawla <amitoj1606@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre/lnet: Fix wrong typecasting warning generated by sparse

Fix the following warning generated about type casting by sparse

warning: cast removes address space of expression

The current implementation casts the structure pointers with (char *)
without __user annotation and then adds sizeof struct to it, thereby
generating the sparse warning. Fixed this by removing the unnecessary
char pointer type cast.

Signed-off-by: Niranjan Dighe <niranjan.dighe@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: fix all conditional comparison to zero in LNet layer

Doing if (rc != 0) or if (rc == 0) is bad form. This patch corrects
the LNet code to behavior according to kernel coding standards.

Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: fix all NULL comparisons in LNet layer

This removes every instance of checking a variable against
NULL in the LNet source code.

Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: balance braces properly in LNet layer

Properly balance the braces done wrong as reported by
checkpatch.pl.

Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: remove space in LNet function declarations

Several function declarations have spacing in them. Lets
remove all those instances reported by checkpatch.pl.

Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: don't set more than one variable per line in LNet layer

Cleanup all occurances of more than one variable being set per line as
reported by checkpatch.pl.

Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: add missing spaces for LNet layer reported by checkpatch.pl

Add missing spaces in the code reported by checkpatch.pl.

Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: remove unnecessary blank lines reported by checkpatch.pl

Remove any useless blank lines reported by checkpatch.pl
for LNet layer.

Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: remove unnecessary parentheses around LNet function pointer

No need for the parentheses around any function pointer.

Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: align all code properly for LNet core

In several places in the LNet core the code doesn't align
up properly. This resolves those checkpath issues.

Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: format properly all comment blocks for LNet core

In several places in the LNet core comment blocks don't follow the
linux kernel style. This patch cleans those problems up.

Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: drop *_t from end of struct lnet_text_buf

When lnet_text_buf data structure was transform from typedef
to struct the *_t which is typical of typedef was not drop.
This patch removes the *_t to be consistent.

Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge tag 'iio-for-4.6b' of git://git./linux/kernel/git/jic23/iio into staging-next

Jonathan writes:

2nd round of new IIO device support, features and cleanups for the 4.6 cycle.

New Device Support
* Apex stx104 DAC
  - new driver for this PC104 board. Right now DAC support only.
* ADI ad5064
  - Add support for ad5625, ad5627, ad5645, ad5665, ad5667 DACs.
  - Add support for Linear Technology ltc2606, ltc2607, ltc2609, ltc2616,
    ltc2617, ltc2619, ltc2626, ltc2627 and ltc2629.
* ADI ad7192
  - add support for the ad7193
* Invensense mpu6050
  - substantial rework of driver to use regmap allowing SPI support extending
    the now split driver to cover the MPU6000.
* TI adc0832
  - new driver supporting ADC0831, ADC0832, ADC0834 and ADC0838 ADCs.
* TI ads1015
  - new driver, note that there is an existing hwmon driver. The long term
    intention is to probably remove the hwmon driver but for now we just have
    guards in place to ensure this driver is not built if that one is enabled.
* TI afe4403
  - new driver for this heart rate monitor / pulse oximeter front end chip.
* TI afe4404
  - new driver for this heart rate monitor / pulse oximeter front end chip.

Staging Graduations
* mxs-lradc
  - A combined general purpose and touch screen (input) device driver.
    Originally held in staging to allow reworking into and MFD but as
    that wasn't happening and isn't an absolute requirement we are moving
    it out of staging.

Driver new features
* ms5611
  - triggered buffer support
  - IIO_CHAN_INFO_SCALE to aid the triggered buffer support.

Driver cleanups / reworks / fixes
* ad5064
  - Use an enum for the register map layout to allow support of additional
    chips (precursor to the new support listed above).
  - Structural driver changes to allow support of the slightly different
    handling for the ltc parts above.
* ad5933
  - drop an exceptional & unnecessary for a function pointer.
* ad7606
  - Cleanup the repeated copies of pm ops.
  - consolidate the various channels specs via a sport of rearranging so only
    one version is needed.
* atlas ph sensor
  - add select IRQ_WORK
* hmc8543 (soon to move out of staging)
  - Comment style fixes
  - functionality of suspend and resume was swapped.
* spear-adc
  - use devm_clk_dev instead of managing the clk lifetime by hand.

Core
* Use new dmaengine_terminate_sync call to avoid a theoretical race.
* Fix docs for mlock in struct iio_dev as it is correctly taken in some
  drivers (docs used to say for core only).
* Add a helper function for calculating the scan index storage size within
  the core cutting out some cut and paste versions of the same code.

iio: adc: Add TI ADS1015 ADC driver support

The driver has sysfs readings with runtime PM support for power saving.
It also offers buffer support that can be used together with IIO software
triggers.

Datasheet can be found here:
http://www.ti.com.cn/cn/lit/ds/symlink/ads1015.pdf

Signed-off-by: Daniel Baluta <daniel.baluta@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

iio: Add IIO support for the DAC on the Apex Embedded Systems STX104

The Apex Embedded Systems STX104 is a 16-channel 16-bit analog input and
2-channel 16-bit analog output PC/104 card. The STX104 incorporates a
large one mega-sample FIFO.

This driver provides IIO support for the 2-channel DAC on the STX104.
The base port addresses for the devices may be configured via the "base"
module parameter array.

Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

iio: imu: inv_mpu6050: Add SPI support for MPU6000

The only difference between the MPU6000 and the
MPU6050 is that the first also supports SPI.
Add SPI driver for this chip.

Signed-off-by: Adriana Reus <adriana.reus@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

iio: imu: inv_mpu6050: Separate driver into core and i2c functionality.

Separate this driver into core and i2c functionality.
This is in preparation for adding spi support.

Signed-off-by: Adriana Reus <adriana.reus@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

iio: imu: inv_mpu6050: Use regmap instead of i2c specific functions

Use regmap instead of i2c specific functions.
This is in preparation of splitting this driver into core and
i2c specific functionality.

Signed-off-by: Adriana Reus <adriana.reus@intel.com>
Acked-by: Crt Mori <cmo@melexis.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

iio: imu: inv-mpu6050: Fix interrupt pin configuration

The select/deselect_bypass duo writes the irq number into the interrupt
configuration register.
If there is a i2c slave device connected to the mpu (eg. a magnetometer)
then this can hinder interrupt delivery for the accelerometer and
gyroscope.
Set this register to the default configuration.

Signed-off-by: Adriana Reus <adriana.reus@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

staging: fsl-mc: Remove unneeded parentheses

Remove unneeded parentheses on the right hand side of assignment
statements.
Semantic patch:

@@
expression a, b, c;
@@

(
  a = (b == c)
|
  a =
- (
  b
- )
)

Signed-off-by: Janani Ravichandran <janani.rvchndrn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: media: Remove unneeded parentheses

Remove unneeded parentheses in assignment statements.
Semantic patch:

@@
expression a, b, c;
@@

(
  a = (b == c)
|
  a =
- (
  b
- )
)

Signed-off-by: Janani Ravichandran <janani.rvchndrn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: emxx_udc: Remove parentheses around the right hand side of assignment

Remove parentheses around the right hand side of assignments as they are
not needed. Semantic patch used:

@@
expression a, b, c;
@@

(
  a = (b == c)
|
  a =
- (
  b
- )
)

Signed-off-by: Janani Ravichandran <janani.rvchndrn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: prefer using eth_broadcast_addr()

Prefer using the eth_broadcast_addr() instead of memset to broadcast
address 0xFF to the array.

Signed-off-by: Hari Prasath Gujulan Elango <hgujulan@visteon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: fix signal strength indication

RTL8188E can only have a maximum of 2 chains so match that in the actual
phy_rx_agc_info structure within phy_status_rpt.  This will cause the
other data received from the PHY, such as signal strength indication of
beacons, to properly align and allow extraction and use within the
signal strength record-keeping mechanisms.

Signed-off-by: Andrew Bradford <andrew@bradfordembedded.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: add release_firmware() between request_firmware and function error exit

Small memory leak fixed.

Signed-off-by: Ivan Safonov <insafonov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: remove pfirmware and fwsize of the hal_data_8188e structure

The pfirmware is used only in rtl88eu_download_fw function
(except the kfree(rtlhal->pfirmware) in netdev_close).

The fwsize not used after initialization at all.

The pfirmvare replaced by fw_data and fwsize removed.

Signed-off-by: Ivan Safonov <insafonov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: remove _rtl88e_fill_dummy

The _rtl88e_fill_dummy function replaced by memset in rtl88eu_download_fw.

More appropriate names are used for pfwdata and fwsize variables
(download_data and download_size respectively).

Also u32 replaced by size_t for download_size variable.

Signed-off-by: Ivan Safonov <insafonov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove unnecessary pointer cast

Remove unnecessary pointer cast. Issue found using the following Coccinelle semantic patch.

@@
type T;
T e;
identifier x;
@@

* T x = (T)e;

Signed-off-by: Janani Ravichandran <janani.rvchndrn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723au: Use ARRAY_SIZE macro for sizes of arrays

Use ARRAY_SIZE to calculate the size of an array to make code concise.
The semantic patch used can be found here:
https://github.com/coccinelle/coccinellery/commit/9cbab452a3a2e18439e8386d6c4a68ee42c3ee2b

Signed-off-by: Janani Ravichandran <janani.rvchndrn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: vt6655: Add check dma_mapping_error

This patch checks for dma_mapping_error() after using dma_map_single.
If the dma map fails we release skb buff allocated by dev_alloc_skb() to
avoid possible causes of resource leak.

Signed-off-by: Haneen Mohammed <hamohammed.sa@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: replace explicit NULL comparison with ! operator

Replace explicit NULL comparison with ! operator to simplify code.

Found with Coccinelle:
@@
expression e;
statement s0, s1;
@@

if (
(
+ !
e
- == NULL
 || ...
)
 ) s0 else s1

Signed-off-by: Alison Schofield <amsfield22@gmail.com>
Acked-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: gdm724x: Remove unneeded parentheses

Remove parentheses around the right hand side of assignment statements
as they are not needed.
Semantic patch:

@@
expression a, b, c;
@@

(
  a = (b == c)
|
  a =
- (
  b
- )
)
Signed-off-by: Janani Ravichandran <janani.rvchndrn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: gdm72xx: compress return logic into one line

Simplify function returns by merging assignment and return into
one command line.
Found with Coccinelle
@@
expression e, ret;
@@

-ret =
+return
e;
-return ret;

Signed-off-by: Alison Schofield <amsfield22@gmail.com>
Acked-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: speakup: compress return logic into one line

Simplify function return by merging assignment and return into
one command line. Remove (now) unused local variable.

Found using Coccinelle:
@@
expression e, ret;
@@

-ret =
+return
e;
-return ret;

Signed-off-by: Alison Schofield <amsfield22@gmail.com>
Acked-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: speakup: Eliminate commented out code

This patch removes commented out code as it contributes to code clutter.

Signed-off-by: Janani Ravichandran <janani.rvchndrn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: fbtft: Remove blank line after '{' brace

Omit the whitespace after '{' brace as suggested by checkpatch.

CHECK: Blank lines aren't necessary after an open brace '{'

Signed-off-by: Eva Rachel Retuya <eraretuya@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: fbtft: Add blank line after function declaration

Insert the required whitespace after the function declaration as
suggested by checkpatch.

CHECK: Please use a blank line after function/struct/union/enum
declarations

Signed-off-by: Eva Rachel Retuya <eraretuya@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: fbtft: Indent to match open parenthesis

Fix alignment issues by properly indenting function parameters in
accordance to the kernel coding style. Checkpatch pointed out this
issue.

CHECK: Alignment should match open parenthesis

Signed-off-by: Eva Rachel Retuya <eraretuya@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: fbtft: Fix block comments according to kernel coding style

Add the required trailing * on subsequent lines as well as move the */
on a separate line. Checkpatch found this issue.

Signed-off-by: Eva Rachel Retuya <eraretuya@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sm750fb: change definition of PANEL_HORIZONTAL_TOTAL fields

Use stratight-forward defintion of PANEL_HORIZONTAL_TOTAL register fields
and use open-coded implementation for register manipulations

Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sm750fb: use BIT macro for I2C_STATUS fields

Replace complex definition of I2C_STATUS register fields with BIT() macro
and use open-coded implementation for register manipulation

Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sm750fb: use BIT macro for I2C_CTRL fields

Replace complex definition of I2C_CTRL register fields with BIT() macro and
use open-coded implementation for register manipulation

Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sm750fb: change definition of CRT_DISPLAY_CTRL multi-bit fields

Use more straight-forward definitions for multi-bit fields of
CRT_DISPLAY_CTRL register and use open-coded implementation for register
manipulation

Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sm750fb: use BIT macro for CRT_DISPLAY_CTRL single-bit fields

Replace complex definition of CRT_DISPLAY_CTRL register fields with
BIT() macro and use open-coded implementation for register manipulation

Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sm750fb: use BIT macro for DMA_ABORT_INTERRUPT single-bit fields

Replace complex definition of DMA_ABORT_INTERRUPT register fields with
BIT() macro and use open-coded implementation for register manipulation

Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sm750fb: change definition of PANEL_PLANE_BR fields

Use stratight-forward defintion of PANEL_PLANE_BR register fields and
use open-coded implementation for register manipulations

Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sm750fb: change definition of PANEL_PLANE_TL fields

Use stratight-forward defintion of PANEL_PLANE_TL register fields

Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sm750fb: change definition of PANEL_WINDOW_HEIGHT fields

Use stratight-forward defintion of PANEL_WINDOW_HEIGHT register fields and
use open-coded implementation for register manipulations

Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sm750fb: change definition of PANEL_WINDOW_WIDTH fields

Use stratight-forward defintion of PANEL_WINDOW_WIDTH register fields and
use open-coded implementation for register manipulations

Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sm750fb: change definition of PANEL_FB_WIDTH fields

Use stratight-forward defintion of PANEL_FB_WIDTH register fields and use
open-coded implementation for register manipulations

Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sm750fb: change definition of PANEL_FB_ADDRESS fields

Use BIT() macro for single-bit fields of PANEL_FB_ADDRESS register and
define PANEL_FB_ADDRESS_ADDRESS_MASK for masking the address bits.

Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sm750fb: change definition of PANEL_DISPLAY_CTRL multi-bit fields

Use more straight-forward definitions for multi-bit fields of
PANEL_DISPLAY_CTRL register and use open-coded implementation for register
manipulation

Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sm750fb: remove PANEL_DISPLAY_CTRL_TFT_DISP defines

The PANEL_DISPLAY_CTRL_TFT_DISP definitions artificially encode
PANEL_DISPLAY_CTRL_DUAL_DISPLAY and PANEL_DISPLAY_CTRL_DOUBLE_PIXEL bits
combinations. Replace the PANEL_DISPLAY_CTRL_TFT_DISP usage with direct use
of the bits defined in the datasheet.

Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sm750fb: use BIT macro for PANEL_DISPLAY_CTRL single-bit fields

Replace complex definition of PANEL_DISPLAY_CTRL register fields with BIT()
macro and use open-coded implementation for register manipulations.

Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sm750fb: hw_sm750_setBLANK: reduce printk verbosity

pr_debug would be enough

Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sm750fb: refactor setDisplayControl function

The enable/disbable sequence in setDisplayControl function is duplicated
for primary and secondary display controllers. The function can be
refactored so that the common part of register access will be shared for
both controllers.

Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sm750fb: merge reserved bits of PANEL/CRT_DISPLAY_CTRL registers

Use single mask for reserved bits in PANEL_DISPLAY_CTRL and
CRT_DISPLAY_CTRL registers.

Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sm750fb: share common bits in display control registers

The display control registers for primary and secondary display share some
of the bits and those bits can be defined in a single place and then used
for manipulations of the relevant registers.

Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sm750fb: setDisplayControl: rename local vairables

Remove HungarianCamelCase notation.

Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sm750fb: programModeRegisters: rename local vairables

Remove HungarianCamelCase notation.

Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sm750fb: change definition of VGA_CONFIGURATION multi-bit field

Use more straight-forward definitions for multi-bit field of
VGA_CONFIGURATION register.

Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sm750fb: use BIT macro for VGA_CONFIGURATION single-bit fields

Replace complex defintion of VGA_CONFIGURATION register fields with BIT()
macro and use open-coded implementation for VGA_CONFIGURATION
manipulations.

Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sm750fb: drop redundant defines for PLL_CTRL fields

The PLL_CTRL fields have common defines for several PLL control
registers and re-defining the same values per register is not needed.

Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sm750fb: change defintion of PANEL_PLL_CTRL multi-bit fields

Use more straight-forward definitions for multi-bit field of
PANEL_PLL_CTRL register and use open-coded implementation for register
manipulations.

Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sm750fb: use BIT macro for PLL_CTRL single-bit fields

Replace complex defintion of PLL_CTRL fields with BIT() macro and use
open-coded implementation for PLL register manipulations.

Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sm750fb: use PLL_CTRL_POWER defines for CRT_PLL_CTRL

Use PLL_CTRL_POWER definitions for CRT_PLL_CTRL register access

Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sm750fb: rename PANEL_PLL_CTRL_* fields to PLL_CTRL_*

Several PLL control registers have the same layout and therefore the
field definitions may be shared for those registers. Renaming
definitions of PANEL_PLL_CTRL_* fields to more generic PLL_CTRL_* will
allow reusing these definitions for other PLL control registers.

Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sm750fb: formatPllReg: fix comment formatting

Fix comment alignment and formatting to follow kernel coding style

Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sm750fb: formatPllReg: rename ulPllReg to reg

Remove HungarianCamelCase notation

Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: dgnc: convert to wait_event_interruptible_timeout

This patch makes use of wait_event_interruptible_timeout to achieve
timeout functionality.This is a TODO mentiond in the comment which is also
removed.It also aligns with what the function is supposed to do as in the
comments.

Signed-off-by: Hari Prasath Gujulan Elango <hgujulan@visteon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: slicoss: Align #define constants

Aligning the constants in the macros improves code readability.

Signed-off-by: Janani Ravichandran <janani.rvchndrn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: xgifb: Remove unneeded parentheses

Remove unneeded parentheses around the right hand side of assignments as
they are not needed. Semantic patch:

@@
expression a, b, c;
@@

(
  a = (b == c)
|
  a =
- (
  b
- )
)

Signed-off-by: Janani Ravichandran <janani.rvchndrn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: xgifb: Remove unnecessary blank lines

This patch removes unnecessary blank lines after { and before }.
Found using checkpatch.pl.

Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: xgifb: Remove space after type cast

This patch removes unnecessary space after type casts.
Found using checkpatch.pl.

Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: comedi: Prefer using the BIT macro

Replace all instances of bit shifting on 1 with the BIT(x) macro. In
addition, convert other non-1 shift operations with the equivalent
BIT(x) macro for uniformity. Issue pointed out by checkpatch.

CHECK: Prefer using the BIT macro

Signed-off-by: Aybuke Ozdemir <aybuke.147@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: Use ARRAY_SIZE for sizes of arrays

Use ARRAY_SIZE to calculate the size of an array to make code concise.
The semantic patch used can be found here:
https://github.com/coccinelle/coccinellery/commit/9cbab452a3a2e18439e8386d6c4a68ee42c3ee2b

Signed-off-by: Janani Ravichandran <janani.rvchndrn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: comedi.h: remove SDF_MODE0 etc.

The macros `SDF_MODE0`, `SDF_MODE1`, `SDF_MODE2`, `SDF_MODE3`, and
`SDF_MODE4` are COMEDI subdevice flags originally associated with the
obsolete (and no longer present) COMEDI "trigger" functionality.  They
have been of no use since COMEDI release 0.7.61 back in November 2001.
Since they were going spare, a couple of them have been aliased as
`SDF_PWM_COUNTER` and `SDF_PWM_HBRIDGE` to mean other things.  Remove
the obsolete macros and redefine `SDF_PWM_COUNTER` and `SDF_PWM_HBRIDGE`
as equivalent numeric values.

Some code distributed with the userspace COMEDILIB library uses the
`SDF_MODE0` etc. flags to display the fact that they are set, but
COMEDILIB uses and installs its own, compatible version of "comedi.h"
anyway so isn't affected by their removal from the kernel copy.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>