Linus Torvalds [Sat, 10 Jun 2017 17:22:35 +0000 (10:22 -0700)]
Merge branch 'rcu-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull RCU fixes from Ingo Molnar:
"Fix an SRCU bug affecting KVM IRQ injection"
* 'rcu-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
srcu: Allow use of Classic SRCU from both process and interrupt context
srcu: Allow use of Tiny/Tree SRCU from both process and interrupt context
Linus Torvalds [Sat, 10 Jun 2017 17:15:47 +0000 (10:15 -0700)]
Merge branch 'perf-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull perf fixes from Ingo Molnar:
"This is mostly tooling fixes, plus an instruction pointer filtering
fix.
It's more fixes than usual - Arnaldo got back from a longer vacation
and there was a backlog"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (27 commits)
perf symbols: Kill dso__build_id_is_kmod()
perf symbols: Keep DSO->symtab_type after decompress
perf tests: Decompress kernel module before objdump
perf tools: Consolidate error path in __open_dso()
perf tools: Decompress kernel module when reading DSO data
perf annotate: Use dso__decompress_kmodule_path()
perf tools: Introduce dso__decompress_kmodule_{fd,path}
perf tools: Fix a memory leak in __open_dso()
perf annotate: Fix symbolic link of build-id cache
perf/core: Drop kernel samples even though :u is specified
perf script python: Remove dups in documentation examples
perf script python: Updated trace_unhandled() signature
perf script python: Fix wrong code snippets in documentation
perf script: Fix documentation errors
perf script: Fix outdated comment for perf-trace-python
perf probe: Fix examples section of documentation
perf report: Ensure the perf DSO mapping matches what libdw sees
perf report: Include partial stacks unwound with libdw
perf annotate: Add missing powerpc triplet
perf test: Disable breakpoint signal tests for powerpc
...
Linus Torvalds [Sat, 10 Jun 2017 17:12:14 +0000 (10:12 -0700)]
Merge branch 'efi-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull EFI fix from Ingo Molnar:
"A boot crash fix for certain systems where the kernel would trust a
piece of firmware data it should not have"
* 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
efi: Fix boot panic because of invalid BGRT image address
Linus Torvalds [Sat, 10 Jun 2017 05:30:55 +0000 (22:30 -0700)]
Merge tag 'iommu-fixes-v4.12-rc4' of git://git./linux/kernel/git/joro/iommu
Pull IOMMU fixes from Joerg Roedel:
- another compile-fix for my header cleanup
- a couple of fixes for the recently merged IOMMU probe deferal code
- fixes for ACPI/IORT code necessary with IOMMU probe deferal
* tag 'iommu-fixes-v4.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
arm: dma-mapping: Reset the device's dma_ops
ACPI/IORT: Move the check to get iommu_ops from translated fwspec
ARM: dma-mapping: Don't tear down third-party mappings
ACPI/IORT: Ignore all errors except EPROBE_DEFER
iommu/of: Ignore all errors except EPROBE_DEFER
iommu/of: Fix check for returning EPROBE_DEFER
iommu/dma: Fix function declaration
Linus Torvalds [Sat, 10 Jun 2017 05:28:33 +0000 (22:28 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/dtor/input
Pull input fixes from Dmitry Torokhov:
- mark "guest" RMI device as pass-through port to avoid "phantom" ALPS
toouchpad on newer Lenovo Carbons
- add two more laptops to the Elantech's lists of devices using CRC
mode
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: synaptics-rmi4 - register F03 port as pass-through serio
Input: elantech - add Fujitsu Lifebook E546/E557 to force crc_enabled
Linus Torvalds [Sat, 10 Jun 2017 05:24:23 +0000 (22:24 -0700)]
Merge tag 'md/4.12-rc5' of git://git./linux/kernel/git/shli/md
Pull MD bugfix from Shaohua Li:
"One bug fix from Neil Brown for MD. The bug was introduced in this
cycle"
* tag 'md/4.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/shli/md:
md: initialise ->writes_pending in personality modules.
Linus Torvalds [Sat, 10 Jun 2017 05:18:41 +0000 (22:18 -0700)]
Merge branch 'for-linus' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
"A set of fixes in the area of block IO, that should go into the next
-rc release. This contains:
- An OOPS fix from Dmitry, fixing a regression with the bio integrity
code in this series.
- Fix truncation of elevator io context cache name, from Eric
Biggers.
- NVMe pull from Christoph includes FC fixes from James, APST
fixes/tweaks from Kai-Heng, removal fix from Rakesh, and an RDMA
fix from Sagi.
- Two tweaks for the block throttling code. One from Joseph Qi,
fixing an oops from the timer code, and one from Shaohua, improving
the behavior on rotatonal storage.
- Two blk-mq fixes from Ming, fixing corner cases with the direct
issue code.
- Locking fix for bfq cgroups from Paolo"
* 'for-linus' of git://git.kernel.dk/linux-block:
block, bfq: access and cache blkg data only when safe
Fix loop device flush before configure v3
blk-throttle: set default latency baseline for harddisk
blk-throttle: fix NULL pointer dereference in throtl_schedule_pending_timer
nvme: relax APST default max latency to 100ms
nvme: only consider exit latency when choosing useful non-op power states
nvme-fc: fix missing put reference on controller create failure
nvme-fc: on lldd/transport io error, terminate association
nvme-rdma: fast fail incoming requests while we reconnect
nvme-pci: fix multiple ctrl removal scheduling
nvme: fix hang in remove path
elevator: fix truncation of icq_cache_name
blk-mq: fix direct issue
blk-mq: pass correct hctx to blk_mq_try_issue_directly
bio-integrity: Do not allocate integrity context for bio w/o data
Linus Torvalds [Sat, 10 Jun 2017 05:15:08 +0000 (22:15 -0700)]
Merge tag 'sound-4.12-rc5' of git://git./linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"This update contains a slightly hight amount of changes due to the
pending ASoC fixes:
- ALSA timer core got a couple of fixes for races between read and
ioctl, leading to potential read of uninitialized kmalloced memory
- ASoC core fixed the de-registration pattern for use-after-free bug
- The rewrite of probe code in ASoC Intel Skylake for i915 component
- ASoC R-snd got a series of fixes for SSI
- ASoC simple-card, atmel, da7213, and rt286 trivial fixes
- HD-audio ALC269 quirk and rearrangement of quirk table"
* tag 'sound-4.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: timer: Fix missing queue indices reset at SNDRV_TIMER_IOCTL_SELECT
ALSA: timer: Fix race between read and ioctl
ALSA: hda/realtek - Reorder ALC269 ASUS quirk entries
ALSA: hda/realtek: Fix mic and headset jack sense on Asus X705UD
ASoC: rsnd: fixup parent_clk_name of AUDIO_CLKOUTx
ASoC: Intel: Skylake: Fix to parse consecutive string tkns in manifest
ASoC: Intel: Skylake: Fix IPC rx_list corruption
ASoC: rsnd: SSI PIO adjust to 24bit mode
MAINTAINERS: Update email address for patches to Wolfson parts
ASoC: Fix use-after-free at card unregistration
ASoC: simple-card: fix mic jack initialization
ASoC: rsnd: don't call free_irq() on Parent SSI
ASoC: atmel-classd: sync regcache when resuming
ASoC: rsnd: don't use PDTA bit for 24bit on SSI
ASoC: da7213: Fix incorrect usage of bitwise '&' operator for SRM check
rt286: add Thinkpad Helix 2 to force_combo_jack_table
ASoC: Intel: Skylake: Move i915 registration to worker thread
Linus Torvalds [Sat, 10 Jun 2017 05:12:06 +0000 (22:12 -0700)]
Merge tag 'drm-fixes-for-v4.12-rc5' of git://people.freedesktop.org/~airlied/linux
Pull drm fixes from Dave Airlie:
"Intel, nouveau, rockchip, vmwgfx, imx, meson, mediatek and core fixes.
Bit more spread out fixes this time, fixes for 7 drivers + a couple of
core fixes.
i915 and vmwgfx are the main ones. The vmwgfx ones fix a bunch of
regressions in their atomic rework, and a few fixes destined for
stable. i915 has some 4.12 regressions and older things that need to
be fixed in stable as well.
nouveau also has some runtime pm fixes and a timer list handling fix,
otherwise a couple of core and small driver regression fixes"
* tag 'drm-fixes-for-v4.12-rc5' of git://people.freedesktop.org/~airlied/linux: (37 commits)
drm/i915: fix warning for unused variable
drm/meson: Fix driver bind when only CVBS is available
drm/i915: Fix 90/270 rotated coordinates for FBC
drm/i915: Restore has_fbc=1 for ILK-M
drm/i915: Workaround VLV/CHV DSI scanline counter hardware fail
drm/i915: Fix logical inversion for gen4 quirking
drm/i915: Guard against i915_ggtt_disable_guc() being invoked unconditionally
drm/i915: Always recompute watermarks when distrust_bios_wm is set, v2.
drm/i915: Prevent the system suspend complete optimization
drm/i915/psr: disable psr2 for resolution greater than 32X20
drm/i915: Hold a wakeref for probing the ring registers
drm/i915: Short-circuit i915_gem_wait_for_idle() if already idle
drm/i915: Disable decoupled MMIO
drm/i915/guc: Remove stale comment for q_fail
drm/vmwgfx: Bump driver minor and date
drm/vmwgfx: Remove unused legacy cursor functions
drm/vmwgfx: fix spelling mistake "exeeds" -> "exceeds"
drm/vmwgfx: Fix large topology crash
drm/vmwgfx: Make sure to update STDU when FB is updated
drm/vmwgfx: Make sure backup_handle is always valid
...
Linus Torvalds [Fri, 9 Jun 2017 16:59:51 +0000 (09:59 -0700)]
Merge tag 'for-linus-4.12b-rc5-tag' of git://git./linux/kernel/git/xen/tip
Pull xen fix from Juergen Gross:
"A fix for Xen on ARM when dealing with 64kB page size of a guest"
* tag 'for-linus-4.12b-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen/privcmd: Support correctly 64KB page granularity when mapping memory
Dmitry Torokhov [Tue, 6 Jun 2017 20:05:03 +0000 (13:05 -0700)]
Input: synaptics-rmi4 - register F03 port as pass-through serio
The 5th generation Thinkpad X1 Carbons use Synaptics touchpads accessible
over SMBus/RMI, combined with ALPS or Elantech trackpoint devices instead
of classic IBM/Lenovo trackpoints. Unfortunately there is no way for ALPS
driver to detect whether it is dealing with touchpad + trackpoint
combination or just a trackpoint, so we end up with a "phantom" dualpoint
ALPS device in addition to real touchpad and trackpoint.
Given that we do not have any special advanced handling for ALPS or
Elantech trackpoints (unlike IBM trackpoints that have separate driver and
a host of options) we are better off keeping the trackpoints in PS/2
emulation mode. We achieve that by setting serio type to SERIO_PS_PSTHRU,
which will limit number of protocols psmouse driver will try. In addition
to getting rid of the "phantom" touchpads, this will also speed up probing
of F03 pass-through port.
Reported-by: Damjan Georgievski <gdamjan@gmail.com>
Suggested-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Linus Torvalds [Fri, 9 Jun 2017 16:44:46 +0000 (09:44 -0700)]
Merge tag 'powerpc-4.12-5' of git://git./linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
"Mostly fairly minor, of note are:
- Fix percpu allocations to be NUMA aware
- Limit 4k page size config to 64TB virtual address space
- Avoid needlessly restoring FP and vector registers
Thanks to Aneesh Kumar K.V, Breno Leitao, Christophe Leroy, Frederic
Barrat, Madhavan Srinivasan, Michael Bringmann, Nicholas Piggin,
Vaibhav Jain"
* tag 'powerpc-4.12-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/book3s64: Move PPC_DT_CPU_FTRs and enable it by default
powerpc/mm/4k: Limit 4k page size config to 64TB virtual address space
cxl: Fix error path on bad ioctl
powerpc/perf: Fix Power9 test_adder fields
powerpc/numa: Fix percpu allocations to be NUMA aware
cxl: Avoid double free_irq() for psl,slice interrupts
powerpc/kernel: Initialize load_tm on task creation
powerpc/kernel: Fix FP and vector register restoration
powerpc/64: Reclaim CPU_FTR_SUBCORE
powerpc/hotplug-mem: Fix missing endian conversion of aa_index
powerpc/sysdev/simple_gpio: Fix oops in gpio save_regs function
powerpc/spufs: Fix coredump of SPU contexts
powerpc/64s: Add dt_cpu_ftrs boot time setup option
Linus Torvalds [Fri, 9 Jun 2017 16:40:08 +0000 (09:40 -0700)]
Merge tag 'armsoc-fixes' of git://git./linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Olof Johansson:
"Been sitting on these for a couple of weeks waiting on some larger
batches to come in but it's been pretty quiet.
Just your garden variety fixes here:
- A few maintainers updates (ep93xx, Exynos, TI, Marvell)
- Some PM fixes for Atmel/at91 and Marvell
- A few DT fixes for Marvell, Versatile, TI Keystone, bcm283x
- A reset driver patch to set module license for symbol access"
* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
MAINTAINERS: EP93XX: Update maintainership
MAINTAINERS: remove kernel@stlinux.com obsolete mailing list
ARM: dts: versatile: use #include "..." to include local DT
MAINTAINERS: add device-tree files to TI DaVinci entry
ARM: at91: select CONFIG_ARM_CPU_SUSPEND
ARM: dts: keystone-k2l: fix broken Ethernet due to disabled OSR
arm64: defconfig: enable some core options for 64bit Rockchip socs
arm64: marvell: dts: fix interrupts in 7k/8k crypto nodes
reset: hi6220: Set module license so that it can be loaded
MAINTAINERS: add irqchip related drivers to Marvell EBU maintainers
MAINTAINERS: sort F entries for Marvell EBU maintainers
ARM: davinci: PM: Do not free useful resources in normal path in 'davinci_pm_init'
ARM: davinci: PM: Free resources in error handling path in 'davinci_pm_init'
ARM: dts: bcm283x: Reserve first page for firmware
memory: atmel-ebi: mark PM ops as __maybe_unused
MAINTAINERS: Remove Javier Martinez Canillas as reviewer for Exynos
Dave Young [Fri, 9 Jun 2017 08:45:58 +0000 (08:45 +0000)]
efi: Fix boot panic because of invalid BGRT image address
Maniaxx reported a kernel boot crash in the EFI code, which I emulated
by using same invalid phys addr in code:
BUG: unable to handle kernel paging request at
ffffffffff280001
IP: efi_bgrt_init+0xfb/0x153
...
Call Trace:
? bgrt_init+0xbc/0xbc
acpi_parse_bgrt+0xe/0x12
acpi_table_parse+0x89/0xb8
acpi_boot_init+0x445/0x4e2
? acpi_parse_x2apic+0x79/0x79
? dmi_ignore_irq0_timer_override+0x33/0x33
setup_arch+0xb63/0xc82
? early_idt_handler_array+0x120/0x120
start_kernel+0xb7/0x443
? early_idt_handler_array+0x120/0x120
x86_64_start_reservations+0x29/0x2b
x86_64_start_kernel+0x154/0x177
secondary_startup_64+0x9f/0x9f
There is also a similar bug filed in bugzilla.kernel.org:
https://bugzilla.kernel.org/show_bug.cgi?id=195633
The crash is caused by this commit:
7b0a911478c7 efi/x86: Move the EFI BGRT init code to early init code
The root cause is the firmware on those machines provides invalid BGRT
image addresses.
In a kernel before above commit BGRT initializes late and uses ioremap()
to map the image address. Ioremap validates the address, if it is not a
valid physical address ioremap() just fails and returns. However in current
kernel EFI BGRT initializes early and uses early_memremap() which does not
validate the image address, and kernel panic happens.
According to ACPI spec the BGRT image address should fall into
EFI_BOOT_SERVICES_DATA, see the section 5.2.22.4 of below document:
http://www.uefi.org/sites/default/files/resources/ACPI_6_1.pdf
Fix this issue by validating the image address in efi_bgrt_init(). If the
image address does not fall into any EFI_BOOT_SERVICES_DATA areas we just
bail out with a warning message.
Reported-by: Maniaxx <tripleshiftone@gmail.com>
Signed-off-by: Dave Young <dyoung@redhat.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Fixes:
7b0a911478c7 ("efi/x86: Move the EFI BGRT init code to early init code")
Link: http://lkml.kernel.org/r/20170609084558.26766-2-ard.biesheuvel@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Ingo Molnar [Fri, 9 Jun 2017 06:17:10 +0000 (08:17 +0200)]
Merge branch 'rcu/urgent' of git://git./linux/kernel/git/paulmck/linux-rcu into rcu/urgent
Pull RCU fix from Paul E. McKenney:
" This series enables srcu_read_lock() and srcu_read_unlock() to be used from
interrupt handlers, which fixes a bug in KVM's use of SRCU in delivery
of interrupts to guest OSes. "
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Dave Airlie [Fri, 9 Jun 2017 03:12:02 +0000 (13:12 +1000)]
Merge branch 'vmwgfx-fixes-4.12' of git://people.freedesktop.org/~thomash/linux into drm-fixes
A bunch of fixes for vmwgfx 4.12 regressions and older stuff. In the latter
case either trivial, cc'd stable or requiring backports for stable.
* 'vmwgfx-fixes-4.12' of git://people.freedesktop.org/~thomash/linux:
drm/vmwgfx: Bump driver minor and date
drm/vmwgfx: Remove unused legacy cursor functions
drm/vmwgfx: fix spelling mistake "exeeds" -> "exceeds"
drm/vmwgfx: Fix large topology crash
drm/vmwgfx: Make sure to update STDU when FB is updated
drm/vmwgfx: Make sure backup_handle is always valid
drm/vmwgfx: Handle vmalloc() failure in vmw_local_fifo_reserve()
drm/vmwgfx: Don't create proxy surface for cursor
drm/vmwgfx: limit the number of mip levels in vmw_gb_surface_define_ioctl()
Dave Airlie [Fri, 9 Jun 2017 02:18:07 +0000 (12:18 +1000)]
Merge tag 'drm-intel-fixes-2017-06-08' of git://anongit.freedesktop.org/git/drm-intel into drm-fixes
drm/i915 fixes for v4.12-rc5
* tag 'drm-intel-fixes-2017-06-08' of git://anongit.freedesktop.org/git/drm-intel:
drm/i915: fix warning for unused variable
drm/i915: Fix 90/270 rotated coordinates for FBC
drm/i915: Restore has_fbc=1 for ILK-M
drm/i915: Workaround VLV/CHV DSI scanline counter hardware fail
drm/i915: Fix logical inversion for gen4 quirking
drm/i915: Guard against i915_ggtt_disable_guc() being invoked unconditionally
drm/i915: Always recompute watermarks when distrust_bios_wm is set, v2.
drm/i915: Prevent the system suspend complete optimization
drm/i915/psr: disable psr2 for resolution greater than 32X20
drm/i915: Hold a wakeref for probing the ring registers
drm/i915: Short-circuit i915_gem_wait_for_idle() if already idle
drm/i915: Disable decoupled MMIO
drm/i915/guc: Remove stale comment for q_fail
drm/i915: Serialize GTT/Aperture accesses on BXT
Dave Airlie [Fri, 9 Jun 2017 02:17:27 +0000 (12:17 +1000)]
Merge tag 'drm-misc-fixes-2017-06-07' of git://anongit.freedesktop.org/git/drm-misc into drm-fixes
Driver Changes:
- kirin: Use correct dt port for the bridge (John)
- meson: Fix regression caused by adding HDMI support to allow board
configurations without HDMI (Neil)
Cc: John Stultz <john.stultz@linaro.org>
Cc: Neil Armstrong <narmstrong@baylibre.com>
* tag 'drm-misc-fixes-2017-06-07' of git://anongit.freedesktop.org/git/drm-misc:
drm/meson: Fix driver bind when only CVBS is available
drm: kirin: Fix drm_of_find_panel_or_bridge conversion
Dave Airlie [Fri, 9 Jun 2017 02:17:00 +0000 (12:17 +1000)]
Merge branch 'mediatek-drm-fixes-4.12-rc1' of https://github.com/ckhu-mediatek/linux.git-tags into drm-fixes
mediatek fixes
* 'mediatek-drm-fixes-4.12-rc1' of https://github.com/ckhu-mediatek/linux.git-tags:
drm/mediatek: fix mtk_hdmi_setup_vendor_specific_infoframe mistake
drm/mediatek: fix a timeout loop
Dave Airlie [Fri, 9 Jun 2017 02:16:25 +0000 (12:16 +1000)]
Merge tag 'imx-drm-fixes-2017-06-08' of git://git.pengutronix.de/git/pza/linux into drm-fixes
imx-drm: PRE clock gating, panelless LDB, and VDIC CSI selection fixes
- Keep the external clock input to the PRE ungated and only use the internal
soft reset to keep the module in low power state, to avoid sporadic startup
failures.
- Ignore -ENODEV return values from drm_of_find_panel_or_bridge in the LDB
driver to fix probing for devices that still do not specify a panel in the
device tree.
- Fix the CSI input selection to the VDIC. According to experiments, the real
behaviour differs a bit from the documentation.
* tag 'imx-drm-fixes-2017-06-08' of git://git.pengutronix.de/git/pza/linux:
gpu: ipu-v3: Fix CSI selection for VDIC
drm/imx: imx-ldb: Accept drm_of_find_panel_or_bridge failure
gpu: ipu-v3: pre: only use internal clock gating
Linus Torvalds [Fri, 9 Jun 2017 00:40:32 +0000 (17:40 -0700)]
Merge tag 'pm-4.12-rc5' of git://git./linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These revert one problematic commit related to system sleep and fix
one recent intel_pstate regression.
Specifics:
- Revert a recent commit that attempted to avoid spurious wakeups
from suspend-to-idle via ACPI SCI, but introduced regressions on
some systems (Rafael Wysocki).
We will get back to the problem it tried to address in the next
cycle.
- Fix a possible division by 0 during intel_pstate initialization
due to a missing check (Rafael Wysocki)"
* tag 'pm-4.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
Revert "ACPI / sleep: Ignore spurious SCI wakeups from suspend-to-idle"
cpufreq: intel_pstate: Avoid division by 0 in min_perf_pct_min()
Linus Torvalds [Thu, 8 Jun 2017 23:28:49 +0000 (16:28 -0700)]
Merge tag 'modules-for-v4.12-rc5' of git://git./linux/kernel/git/jeyu/linux
Pull module maintainer address change from Jessica Yu:
"A single patch that advertises my email address change"
* tag 'modules-for-v4.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux:
MAINTAINERS: update email address for Jessica Yu
Rafael J. Wysocki [Thu, 8 Jun 2017 23:25:16 +0000 (01:25 +0200)]
Merge branches 'intel_pstate' and 'pm-sleep'
* intel_pstate:
cpufreq: intel_pstate: Avoid division by 0 in min_perf_pct_min()
* pm-sleep:
Revert "ACPI / sleep: Ignore spurious SCI wakeups from suspend-to-idle"
Ingo Molnar [Thu, 8 Jun 2017 22:41:33 +0000 (00:41 +0200)]
Merge tag 'perf-urgent-for-mingo-4.12-
20170608' of git://git./linux/kernel/git/acme/linux into perf/urgent
Pull perf/urgent fixes from Arnaldo Carvalho de Melo:
- Fixes for handling compressed kernel modules (Namhyung Kim)
- Fix handling old style build-id cache ($HOME/.debug/) (Namhyung Kim)
- 'perf script' python/perl documentation fixes: outdated comments,
invalid code snippets, etc (SeongJae Park)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Namhyung Kim [Thu, 8 Jun 2017 07:31:09 +0000 (16:31 +0900)]
perf symbols: Kill dso__build_id_is_kmod()
The commit
e7ee40475760 ("perf symbols: Fix symbols searching for module
in buildid-cache") added the function to check kernel modules reside in
the build-id cache. This was because there's no way to identify a DSO
which is actually a kernel module. So it searched linkname of the file
and find ".ko" suffix.
But this does not work for compressed kernel modules and now such DSOs
hCcave correct symtab_type now. So no need to check it anymore. This
patch essentially reverts the commit.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: kernel-team@lge.com
Link: http://lkml.kernel.org/r/20170608073109.30699-10-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Namhyung Kim [Thu, 8 Jun 2017 07:31:08 +0000 (16:31 +0900)]
perf symbols: Keep DSO->symtab_type after decompress
The symsrc__init() overwrites dso->symtab_type as symsrc->type in
dso__load_sym(). But for compressed kernel modules in the build-id
cache, it should have original symtab type to be decompressed as needed.
This fixes perf annotate to show disassembly of the function properly.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: kernel-team@lge.com
Link: http://lkml.kernel.org/r/20170608073109.30699-9-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Namhyung Kim [Thu, 8 Jun 2017 07:31:07 +0000 (16:31 +0900)]
perf tests: Decompress kernel module before objdump
If a kernel modules is compressed, it should be decompressed before
running objdump to parse binary data correctly. This fixes a failure of
object code reading test for me.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: kernel-team@lge.com
Link: http://lkml.kernel.org/r/20170608073109.30699-8-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Namhyung Kim [Thu, 8 Jun 2017 07:31:06 +0000 (16:31 +0900)]
perf tools: Consolidate error path in __open_dso()
On failure, it should free the 'name', so clean up the error path using
goto.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Suggested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: kernel-team@lge.com
Link: http://lkml.kernel.org/r/20170608073109.30699-7-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Namhyung Kim [Thu, 8 Jun 2017 07:31:05 +0000 (16:31 +0900)]
perf tools: Decompress kernel module when reading DSO data
Currently perf decompresses kernel modules when loading the symbol table
but it missed to do it when reading raw data.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: kernel-team@lge.com
Link: http://lkml.kernel.org/r/20170608073109.30699-6-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Namhyung Kim [Thu, 8 Jun 2017 07:31:04 +0000 (16:31 +0900)]
perf annotate: Use dso__decompress_kmodule_path()
Convert open-coded decompress routine to use the function.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: kernel-team@lge.com
Link: http://lkml.kernel.org/r/20170608073109.30699-5-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Namhyung Kim [Thu, 8 Jun 2017 07:31:03 +0000 (16:31 +0900)]
perf tools: Introduce dso__decompress_kmodule_{fd,path}
Move decompress_kmodule() to util/dso.c and split it into two functions
returning fd and (decompressed) file path. The existing user only wants
the fd version but the path version will be used soon.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: kernel-team@lge.com
Link: http://lkml.kernel.org/r/20170608073109.30699-4-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Namhyung Kim [Thu, 8 Jun 2017 07:31:02 +0000 (16:31 +0900)]
perf tools: Fix a memory leak in __open_dso()
The 'name' variable should be freed on the error path.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: kernel-team@lge.com
Link: http://lkml.kernel.org/r/20170608073109.30699-3-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Namhyung Kim [Thu, 8 Jun 2017 07:31:01 +0000 (16:31 +0900)]
perf annotate: Fix symbolic link of build-id cache
The commit
6ebd2547dd24 ("perf annotate: Fix a bug following symbolic
link of a build-id file") changed to use dirname to follow the symlink.
But it only considers new-style build-id cache names so old names fail
on readlink() and force to use system path which might not available.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Taeung Song <treeze.taeung@gmail.com>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: kernel-team@lge.com
Fixes:
6ebd2547dd24 ("perf annotate: Fix a bug following symbolic link of a build-id file")
Link: http://lkml.kernel.org/r/20170608073109.30699-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Linus Torvalds [Thu, 8 Jun 2017 17:50:04 +0000 (10:50 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/pmladek/printk
Pull printk fix from Petr Mladek:
"This reverts a fix added into 4.12-rc1. It caused the kernel log to be
printed on another console when two consoles of the same type were
defined, e.g. console=ttyS0 console=ttyS1.
This configuration was never supported by kernel itself, but it
started to make sense with systemd. In other words, the commit broke
userspace"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk:
Revert "printk: fix double printing with earlycon"
Linus Torvalds [Thu, 8 Jun 2017 17:02:58 +0000 (10:02 -0700)]
Merge branch 'linus' of git://git./linux/kernel/git/herbert/crypto-2.6
Pull crypto fixes from Herbert Xu:
"This fixes a couple of places in the crypto code that were doing
interruptible sleeps dangerously. They have been converted to use
non-interruptible sleeps.
This also fixes a bug in asymmetric_keys where it would trigger a
use-after-free if a request returned EBUSY due to a full device queue"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: gcm - wait for crypto op not signal safe
crypto: drbg - wait for crypto op not signal safe
crypto: asymmetric_keys - handle EBUSY due to backlog correctly
Paolo Valente [Mon, 5 Jun 2017 08:11:15 +0000 (10:11 +0200)]
block, bfq: access and cache blkg data only when safe
In blk-cgroup, operations on blkg objects are protected with the
request_queue lock. This is no more the lock that protects
I/O-scheduler operations in blk-mq. In fact, the latter are now
protected with a finer-grained per-scheduler-instance lock. As a
consequence, although blkg lookups are also rcu-protected, blk-mq I/O
schedulers may see inconsistent data when they access blkg and
blkg-related objects. BFQ does access these objects, and does incur
this problem, in the following case.
The blkg_lookup performed in bfq_get_queue, being protected (only)
through rcu, may happen to return the address of a copy of the
original blkg. If this is the case, then the blkg_get performed in
bfq_get_queue, to pin down the blkg, is useless: it does not prevent
blk-cgroup code from destroying both the original blkg and all objects
directly or indirectly referred by the copy of the blkg. BFQ accesses
these objects, which typically causes a crash for NULL-pointer
dereference of memory-protection violation.
Some additional protection mechanism should be added to blk-cgroup to
address this issue. In the meantime, this commit provides a quick
temporary fix for BFQ: cache (when safe) blkg data that might
disappear right after a blkg_lookup.
In particular, this commit exploits the following facts to achieve its
goal without introducing further locks. Destroy operations on a blkg
invoke, as a first step, hooks of the scheduler associated with the
blkg. And these hooks are executed with bfqd->lock held for BFQ. As a
consequence, for any blkg associated with the request queue an
instance of BFQ is attached to, we are guaranteed that such a blkg is
not destroyed, and that all the pointers it contains are consistent,
while that instance is holding its bfqd->lock. A blkg_lookup performed
with bfqd->lock held then returns a fully consistent blkg, which
remains consistent until this lock is held. In more detail, this holds
even if the returned blkg is a copy of the original one.
Finally, also the object describing a group inside BFQ needs to be
protected from destruction on the blkg_free of the original blkg
(which invokes bfq_pd_free). This commit adds private refcounting for
this object, to let it disappear only after no bfq_queue refers to it
any longer.
This commit also removes or updates some stale comments on locking
issues related to blk-cgroup operations.
Reported-by: Tomas Konir <tomas.konir@gmail.com>
Reported-by: Lee Tibbert <lee.tibbert@gmail.com>
Reported-by: Marco Piazza <mpiazza@gmail.com>
Signed-off-by: Paolo Valente <paolo.valente@linaro.org>
Tested-by: Tomas Konir <tomas.konir@gmail.com>
Tested-by: Lee Tibbert <lee.tibbert@gmail.com>
Tested-by: Marco Piazza <mpiazza@gmail.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Paolo Bonzini [Wed, 31 May 2017 12:03:11 +0000 (14:03 +0200)]
srcu: Allow use of Classic SRCU from both process and interrupt context
Linu Cherian reported a WARN in cleanup_srcu_struct() when shutting
down a guest running iperf on a VFIO assigned device. This happens
because irqfd_wakeup() calls srcu_read_lock(&kvm->irq_srcu) in interrupt
context, while a worker thread does the same inside kvm_set_irq(). If the
interrupt happens while the worker thread is executing __srcu_read_lock(),
updates to the Classic SRCU ->lock_count[] field or the Tree SRCU
->srcu_lock_count[] field can be lost.
The docs say you are not supposed to call srcu_read_lock() and
srcu_read_unlock() from irq context, but KVM interrupt injection happens
from (host) interrupt context and it would be nice if SRCU supported the
use case. KVM is using SRCU here not really for the "sleepable" part,
but rather due to its IPI-free fast detection of grace periods. It is
therefore not desirable to switch back to RCU, which would effectively
revert commit
719d93cd5f5c ("kvm/irqchip: Speed up KVM_SET_GSI_ROUTING",
2014-01-16).
However, the docs are overly conservative. You can have an SRCU instance
only has users in irq context, and you can mix process and irq context
as long as process context users disable interrupts. In addition,
__srcu_read_unlock() actually uses this_cpu_dec() on both Tree SRCU and
Classic SRCU. For those two implementations, only srcu_read_lock()
is unsafe.
When Classic SRCU's __srcu_read_unlock() was changed to use this_cpu_dec(),
in commit
5a41344a3d83 ("srcu: Simplify __srcu_read_unlock() via
this_cpu_dec()", 2012-11-29), __srcu_read_lock() did two increments.
Therefore it kept __this_cpu_inc(), with preempt_disable/enable in
the caller. Tree SRCU however only does one increment, so on most
architectures it is more efficient for __srcu_read_lock() to use
this_cpu_inc(), and any performance differences appear to be down in
the noise.
Cc: stable@vger.kernel.org
Fixes:
719d93cd5f5c ("kvm/irqchip: Speed up KVM_SET_GSI_ROUTING")
Reported-by: Linu Cherian <linuc.decode@gmail.com>
Suggested-by: Linu Cherian <linuc.decode@gmail.com>
Cc: kvm@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Paolo Bonzini [Wed, 31 May 2017 12:03:10 +0000 (14:03 +0200)]
srcu: Allow use of Tiny/Tree SRCU from both process and interrupt context
Linu Cherian reported a WARN in cleanup_srcu_struct() when shutting
down a guest running iperf on a VFIO assigned device. This happens
because irqfd_wakeup() calls srcu_read_lock(&kvm->irq_srcu) in interrupt
context, while a worker thread does the same inside kvm_set_irq(). If the
interrupt happens while the worker thread is executing __srcu_read_lock(),
updates to the Classic SRCU ->lock_count[] field or the Tree SRCU
->srcu_lock_count[] field can be lost.
The docs say you are not supposed to call srcu_read_lock() and
srcu_read_unlock() from irq context, but KVM interrupt injection happens
from (host) interrupt context and it would be nice if SRCU supported the
use case. KVM is using SRCU here not really for the "sleepable" part,
but rather due to its IPI-free fast detection of grace periods. It is
therefore not desirable to switch back to RCU, which would effectively
revert commit
719d93cd5f5c ("kvm/irqchip: Speed up KVM_SET_GSI_ROUTING",
2014-01-16).
However, the docs are overly conservative. You can have an SRCU instance
only has users in irq context, and you can mix process and irq context
as long as process context users disable interrupts. In addition,
__srcu_read_unlock() actually uses this_cpu_dec() on both Tree SRCU and
Classic SRCU. For those two implementations, only srcu_read_lock()
is unsafe.
When Classic SRCU's __srcu_read_unlock() was changed to use this_cpu_dec(),
in commit
5a41344a3d83 ("srcu: Simplify __srcu_read_unlock() via
this_cpu_dec()", 2012-11-29), __srcu_read_lock() did two increments.
Therefore it kept __this_cpu_inc(), with preempt_disable/enable in
the caller. Tree SRCU however only does one increment, so on most
architectures it is more efficient for __srcu_read_lock() to use
this_cpu_inc(), and any performance differences appear to be down in
the noise.
Unlike Classic and Tree SRCU, Tiny SRCU does increments and decrements on
a single variable. Therefore, as Peter Zijlstra pointed out, Tiny SRCU's
implementation already supports mixed-context use of srcu_read_lock()
and srcu_read_unlock(), at least as long as uses of srcu_read_lock()
and srcu_read_unlock() in each handler are nested and paired properly.
In other words, it is still illegal to (say) invoke srcu_read_lock()
in an interrupt handler and to invoke the matching srcu_read_unlock()
in a softirq handler. Therefore, the only change required for Tiny SRCU
is to its comments.
Fixes:
719d93cd5f5c ("kvm/irqchip: Speed up KVM_SET_GSI_ROUTING")
Reported-by: Linu Cherian <linuc.decode@gmail.com>
Suggested-by: Linu Cherian <linuc.decode@gmail.com>
Cc: kvm@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Tested-by: Paolo Bonzini <pbonzini@redhat.com>
Jens Axboe [Thu, 8 Jun 2017 14:33:45 +0000 (08:33 -0600)]
Merge branch 'nvme-4.12' of git://git.infradead.org/nvme into for-linus
Christoph writes:
"A few NVMe fixes for 4.12-rc, PCIe reset fixes and APST fixes, a
RDMA reconnect fix, two FC fixes and a general controller removal fix."
Jani Nikula [Thu, 8 Jun 2017 13:58:23 +0000 (16:58 +0300)]
drm/i915: fix warning for unused variable
drivers/gpu/drm/i915/intel_engine_cs.c: In function ‘intel_engine_is_idle’:
drivers/gpu/drm/i915/intel_engine_cs.c:1103:27: error: unused variable ‘dev_priv’ [-Werror=unused-variable]
struct drm_i915_private *dev_priv = engine->i915;
^~~~~~~~
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
James Wang [Thu, 8 Jun 2017 06:52:51 +0000 (14:52 +0800)]
Fix loop device flush before configure v3
While installing SLES-12 (based on v4.4), I found that the installer
will stall for 60+ seconds during LVM disk scan. The root cause was
determined to be the removal of a bound device check in loop_flush()
by commit
b5dd2f6047ca ("block: loop: improve performance via blk-mq").
Restoring this check, examining ->lo_state as set by loop_set_fd()
eliminates the bad behavior.
Test method:
modprobe loop max_loop=64
dd if=/dev/zero of=disk bs=512 count=200K
for((i=0;i<4;i++))do losetup -f disk; done
mkfs.ext4 -F /dev/loop0
for((i=0;i<4;i++))do mkdir t$i; mount /dev/loop$i t$i;done
for f in `ls /dev/loop[0-9]*|sort`; do \
echo $f; dd if=$f of=/dev/null bs=512 count=1; \
done
Test output: stock patched
/dev/loop0 18.1217e-05 8.3842e-05
/dev/loop1 6.1114e-05 0.
000147979
/dev/loop10 0.414701 0.
000116564
/dev/loop11 0.7474 6.7942e-05
/dev/loop12 0.747986 8.9082e-05
/dev/loop13 0.746532 7.4799e-05
/dev/loop14 0.480041 9.3926e-05
/dev/loop15 1.26453 7.2522e-05
Note that from loop10 onward, the device is not mounted, yet the
stock kernel consumes several orders of magnitude more wall time
than it does for a mounted device.
(Thanks for Mike Galbraith <efault@gmx.de>, give a changelog review.)
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: James Wang <jnwang@suse.com>
Fixes:
b5dd2f6047ca ("block: loop: improve performance via blk-mq")
Signed-off-by: Jens Axboe <axboe@fb.com>
Michael Ellerman [Thu, 8 Jun 2017 06:29:59 +0000 (16:29 +1000)]
powerpc/book3s64: Move PPC_DT_CPU_FTRs and enable it by default
The PPC_DT_CPU_FTRs is a bit misplaced in menuconfig, it shows up with
other general kernel options. It's really more at home in the "Platform
Support" section, so move it there.
Also enable it by default, for Book3s 64. It does mostly nothing unless
the device tree properties are found, and we will want it enabled
eventually in distro kernels, so turn it on to start getting more
testing.
Fixes:
5a61ef74f269 ("powerpc/64s: Support new device tree binding for discovering CPU features")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Aneesh Kumar K.V [Thu, 1 Jun 2017 14:35:04 +0000 (20:05 +0530)]
powerpc/mm/4k: Limit 4k page size config to 64TB virtual address space
Supporting 512TB requires us to do a order 3 allocation for level 1 page
table (pgd). This results in page allocation failures with certain workloads.
For now limit 4k linux page size config to 64TB.
Fixes:
f6eedbba7a26 ("powerpc/mm/hash: Increase VA range to 128TB")
Reported-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Frederic Barrat [Tue, 6 Jun 2017 09:43:41 +0000 (11:43 +0200)]
cxl: Fix error path on bad ioctl
Fix error path if we can't copy user structure on CXL_IOCTL_START_WORK
ioctl. We shouldn't unlock the context status mutex as it was not
locked (yet).
Fixes:
0712dc7e73e5 ("cxl: Fix issues when unmapping contexts")
Cc: stable@vger.kernel.org # v3.19+
Signed-off-by: Frederic Barrat <fbarrat@linux.vnet.ibm.com>
Reviewed-by: Vaibhav Jain <vaibhav@linux.vnet.ibm.com>
Reviewed-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Petr Mladek [Thu, 8 Jun 2017 10:01:30 +0000 (12:01 +0200)]
Revert "printk: fix double printing with earlycon"
This reverts commit
cf39bf58afdaabc0b86f141630fb3fd18190294e.
The commit regression to users that define both console=ttyS1
and console=ttyS0 on the command line, see
https://lkml.kernel.org/r/
20170509082915.GA13236@bistromath.localdomain
The kernel log messages always appeared only on one serial port. It is
even documented in Documentation/admin-guide/serial-console.rst:
"Note that you can only define one console per device type (serial,
video)."
The above mentioned commit changed the order in which the command line
parameters are searched. As a result, the kernel log messages go to
the last mentioned ttyS* instead of the first one.
We long thought that using two console=ttyS* on the command line
did not make sense. But then we realized that console= parameters
were handled also by systemd, see
http://0pointer.de/blog/projects/serial-console.html
"By default systemd will instantiate one serial-getty@.service on
the main kernel console, if it is not a virtual terminal."
where
"[4] If multiple kernel consoles are used simultaneously, the main
console is the one listed first in /sys/class/tty/console/active,
which is the last one listed on the kernel command line."
This puts the original report into another light. The system is running
in qemu. The first serial port is used to store the messages into a file.
The second one is used to login to the system via a socket. It depends
on systemd and the historic kernel behavior.
By other words, systemd causes that it makes sense to define both
console=ttyS1 console=ttyS0 on the command line. The kernel fix
caused regression related to userspace (systemd) and need to be
reverted.
In addition, it went out that the fix helped only partially.
The messages still were duplicated when the boot console was
removed early by late_initcall(printk_late_init). Then the entire
log was replayed when the same console was registered as a normal one.
Link:
20170606160339.GC7604@pathway.suse.cz
Cc: Aleksey Makarov <aleksey.makarov@linaro.org>
Cc: Sabrina Dubroca <sd@queasysnail.net>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Peter Hurley <peter@hurleysoftware.com>
Cc: Jiri Slaby <jslaby@suse.com>
Cc: Robin Murphy <robin.murphy@arm.com>,
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: "Nair, Jayachandran" <Jayachandran.Nair@cavium.com>
Cc: linux-serial@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Reported-by: Sabrina Dubroca <sd@queasysnail.net>
Acked-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Jin Yao [Thu, 25 May 2017 10:09:07 +0000 (18:09 +0800)]
perf/core: Drop kernel samples even though :u is specified
When doing sampling, for example:
perf record -e cycles:u ...
On workloads that do a lot of kernel entry/exits we see kernel
samples, even though :u is specified. This is due to skid existing.
This might be a security issue because it can leak kernel addresses even
though kernel sampling support is disabled.
The patch drops the kernel samples if exclude_kernel is specified.
For example, test on Haswell desktop:
perf record -e cycles:u <mgen>
perf report --stdio
Before patch applied:
99.77% mgen mgen [.] buf_read
0.20% mgen mgen [.] rand_buf_init
0.01% mgen [kernel.vmlinux] [k] apic_timer_interrupt
0.00% mgen mgen [.] last_free_elem
0.00% mgen libc-2.23.so [.] __random_r
0.00% mgen libc-2.23.so [.] _int_malloc
0.00% mgen mgen [.] rand_array_init
0.00% mgen [kernel.vmlinux] [k] page_fault
0.00% mgen libc-2.23.so [.] __random
0.00% mgen libc-2.23.so [.] __strcasestr
0.00% mgen ld-2.23.so [.] strcmp
0.00% mgen ld-2.23.so [.] _dl_start
0.00% mgen libc-2.23.so [.] sched_setaffinity@@GLIBC_2.3.4
0.00% mgen ld-2.23.so [.] _start
We can see kernel symbols apic_timer_interrupt and page_fault.
After patch applied:
99.79% mgen mgen [.] buf_read
0.19% mgen mgen [.] rand_buf_init
0.00% mgen libc-2.23.so [.] __random_r
0.00% mgen mgen [.] rand_array_init
0.00% mgen mgen [.] last_free_elem
0.00% mgen libc-2.23.so [.] vfprintf
0.00% mgen libc-2.23.so [.] rand
0.00% mgen libc-2.23.so [.] __random
0.00% mgen libc-2.23.so [.] _int_malloc
0.00% mgen libc-2.23.so [.] _IO_doallocbuf
0.00% mgen ld-2.23.so [.] do_lookup_x
0.00% mgen ld-2.23.so [.] open_verify.constprop.7
0.00% mgen ld-2.23.so [.] _dl_important_hwcaps
0.00% mgen libc-2.23.so [.] sched_setaffinity@@GLIBC_2.3.4
0.00% mgen ld-2.23.so [.] _start
There are only userspace symbols.
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: <stable@vger.kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: acme@kernel.org
Cc: jolsa@kernel.org
Cc: kan.liang@intel.com
Cc: mark.rutland@arm.com
Cc: will.deacon@arm.com
Cc: yao.jin@intel.com
Link: http://lkml.kernel.org/r/1495706947-3744-1-git-send-email-yao.jin@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Jessica Yu [Thu, 8 Jun 2017 06:52:36 +0000 (23:52 -0700)]
MAINTAINERS: update email address for Jessica Yu
I will be traveling in the upcoming months and it'll be much easier for me
to access my kernel.org email rather than my work one. Change my email
address in the MAINTAINERS file from jeyu@redhat.com to jeyu@kernel.org.
Signed-off-by: Jessica Yu <jeyu@redhat.com>
SeongJae Park [Tue, 30 May 2017 11:18:25 +0000 (20:18 +0900)]
perf script python: Remove dups in documentation examples
Few shell command examples in perf-script-python.txt has few nitpicks
include:
- tools/perf/scripts/python directory listing command is unnecessarily
repeated.
- few examples contain additional information in command prompt
unnecessarily and inconsistently.
This commit fixes them to enhance readability of the document.
Signed-off-by: SeongJae Park <sj38.park@gmail.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tom Zanussi <tzanussi@gmail.com>
Fixes:
cff68e582237 ("perf/scripts: Add perf-trace-python Documentation")
Link: http://lkml.kernel.org/r/20170530111827.21732-4-sj38.park@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
SeongJae Park [Tue, 30 May 2017 11:18:27 +0000 (20:18 +0900)]
perf script python: Updated trace_unhandled() signature
Default function signature of trace_unhandled() got changed to include a
field dict, but its documentation, perf-script-python.txt has not been
updated. Fix it.
Signed-off-by: SeongJae Park <sj38.park@gmail.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Pierre Tardy <tardyp@gmail.com>
Fixes:
c02514850d67 ("perf scripts python: Give field dict to unhandled callback")
Link: http://lkml.kernel.org/r/20170530111827.21732-6-sj38.park@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
SeongJae Park [Tue, 30 May 2017 11:18:26 +0000 (20:18 +0900)]
perf script python: Fix wrong code snippets in documentation
This commit fixes wrong code snippets for trace_begin() and trace_end()
function example definition.
Signed-off-by: SeongJae Park <sj38.park@gmail.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tom Zanussi <tzanussi@gmail.com>
Fixes:
cff68e582237 ("perf/scripts: Add perf-trace-python Documentation")
Link: http://lkml.kernel.org/r/20170530111827.21732-5-sj38.park@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
SeongJae Park [Tue, 30 May 2017 11:18:24 +0000 (20:18 +0900)]
perf script: Fix documentation errors
This commit fixes two errors in documents for perf-script-python and
perf-script-perl as below:
- /sys/kernel/debug/tracing events -> /sys/kernel/debug/tracing/events/
- trace_handled -> trace_unhandled
Signed-off-by: SeongJae Park <sj38.park@gmail.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tom Zanussi <tzanussi@gmail.com>
Fixes:
cff68e582237 ("perf/scripts: Add perf-trace-python Documentation")
Link: http://lkml.kernel.org/r/20170530111827.21732-3-sj38.park@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
SeongJae Park [Tue, 30 May 2017 11:18:23 +0000 (20:18 +0900)]
perf script: Fix outdated comment for perf-trace-python
Script generated by the '--gen-script' option contains an outdated
comment. It mentions a 'perf-trace-python' document while it has been
renamed to 'perf-script-python'. Fix it.
Signed-off-by: SeongJae Park <sj38.park@gmail.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes:
133dc4c39c57 ("perf: Rename 'perf trace' to 'perf script'")
Link: http://lkml.kernel.org/r/20170530111827.21732-2-sj38.park@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
SeongJae Park [Sun, 7 May 2017 10:36:42 +0000 (19:36 +0900)]
perf probe: Fix examples section of documentation
An example in perf-probe documentation for pattern of function name
based probe addition is not providing example command for that case.
This commit fixes the example to give appropriate example command.
Signed-off-by: SeongJae Park <sj38.park@gmail.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Taeung Song <treeze.taeung@gmail.com>
Fixes:
ee391de876ae ("perf probe: Update perf probe document")
Link: http://lkml.kernel.org/r/20170507103642.30560-1-sj38.park@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Ulrik De Bie [Wed, 7 Jun 2017 17:30:57 +0000 (10:30 -0700)]
Input: elantech - add Fujitsu Lifebook E546/E557 to force crc_enabled
The Lifebook E546 and E557 touchpad were also not functioning and
worked after running:
echo "1" > /sys/devices/platform/i8042/serio2/crc_enabled
Add them to the list of machines that need this workaround.
Signed-off-by: Ulrik De Bie <ulrik.debie-os@e2big.org>
Reviewed-by: Arjan Opmeer <arjan@opmeer.net>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Ingo Molnar [Wed, 7 Jun 2017 15:50:19 +0000 (17:50 +0200)]
Merge tag 'perf-urgent-for-mingo-4.12-
20170606' of git://git./linux/kernel/git/acme/linux into perf/urgent
Pull perf/urgent fixes from Arnaldo Carvalho de Melo:
- Only print NMI watchdog hint in 'perf stat' when it is enabled (Andi Kleen)
- Fix sys_mmap/sys_old_mmap shandling in s390 in 'perf trace' (Jiri Olsa)
- Disable breakpoint signal tests in powerpc, that lacks the perf kernel
glue to set breakpoint events and makes 'perf test' always fail (Jiri Olsa)
- Fix 'perf annotate' for branch instruction with multiple operands (Kim Phillips)
- Add missing powerpc triplet when disassembling with 'objdump' in 'perf
annotate' (Kim Phillips)
- Do not trow away partial unwound stacks when using libdw, making
callchains produced with it similar to those produced when linked with
the other DWARF unwind library supported in perf, libunwind (Milian Wolff)
- Fixes to properly handle kernel modules when processing build-id meta
events (Namhyung Kim)
- Fix handling of compressed modules in the build-id cache (Namhyung Kim)
- Fix 'perf annotate' failure when filename has special chars (Ravi Bangoria)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Shaohua Li [Tue, 6 Jun 2017 19:40:43 +0000 (12:40 -0700)]
blk-throttle: set default latency baseline for harddisk
hard disk IO latency varies a lot depending on spindle move. The latency
range could be from several microseconds to several milliseconds. It's
pretty hard to get the baseline latency used by io.low.
We will use a different stragety here. The idea is only using IO with
spindle move to determine if cgroup IO is in good state. For HD, if io
latency is small (< 1ms), we ignore the IO. Such IO is likely from
sequential IO, and is helpless to help determine if a cgroup's IO is
impacted by other cgroups. With this, we only account IO with big
latency. Then we can choose a hardcoded baseline latency for HD (4ms,
which is typical IO latency with seek). With all these settings, the
io.low latency works for both HD and SSD.
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Neil Armstrong [Mon, 29 May 2017 14:15:52 +0000 (16:15 +0200)]
drm/meson: Fix driver bind when only CVBS is available
While introducing HDMI support, component matching on connectors node
were bypassed since no driver would actually bind on the DT node.
But when only a CVBS connector is present, only a single node is found
in the graph, but ignored and a NULL match table is given to the
component code.
This code permits bypassing the components framework by binding directly
the DRM driver when no components needs to be loaded.
Fixes:
a41e82e6c457 ("drm/meson: Add support for components")
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1496067352-8733-1-git-send-email-narmstrong@baylibre.com
Joseph Qi [Wed, 7 Jun 2017 03:36:14 +0000 (11:36 +0800)]
blk-throttle: fix NULL pointer dereference in throtl_schedule_pending_timer
I have encountered a NULL pointer dereference in
throtl_schedule_pending_timer:
[ 413.735396] BUG: unable to handle kernel NULL pointer dereference at
0000000000000038
[ 413.735535] IP: [<
ffffffff812ebbbf>] throtl_schedule_pending_timer+0x3f/0x210
[ 413.735643] PGD
22c8cf067 PUD
22cb34067 PMD 0
[ 413.735713] Oops: 0000 [#1] SMP
......
This is caused by the following case:
blk_throtl_bio
throtl_schedule_next_dispatch <= sq is top level one without parent
throtl_schedule_pending_timer
sq_to_tg(sq)->td->throtl_slice <= sq_to_tg(sq) returns NULL
Fix it by using sq_to_td instead of sq_to_tg(sq)->td, which will always
return a valid td.
Fixes:
297e3d854784 ("blk-throttle: make throtl_slice tunable")
Signed-off-by: Joseph Qi <qijiang.qj@alibaba-inc.com>
Reviewed-by: Shaohua Li <shli@fb.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Ville Syrjälä [Fri, 31 Mar 2017 18:00:56 +0000 (21:00 +0300)]
drm/i915: Fix 90/270 rotated coordinates for FBC
The clipped src coordinates have already been rotated by 270 degrees for
when the plane rotation is 90/270 degrees, hence the FBC code should no
longer swap the width and height.
Cc: stable@vger.kernel.org
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Fixes:
b63a16f6cd89 ("drm/i915: Compute display surface offset in the plane check hook for SKL+")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170331180056.14086-4-ville.syrjala@linux.intel.com
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Tested-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
(cherry picked from commit
73714c05df97d7527e7eaaa771472ef2ede46fa3)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Ville Syrjälä [Tue, 6 Jun 2017 13:32:29 +0000 (16:32 +0300)]
drm/i915: Restore has_fbc=1 for ILK-M
Restore the lost has_fbc flag for mobile ILK.
Cc: Carlos Santa <carlos.santa@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Fixes:
a13233804686 ("drm/i915: Introduce GEN5_FEATURES for device info")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170606133229.12439-1-ville.syrjala@linux.intel.com
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit
c2d1a0ced2603c4a17fa9c53c37e415905cf5a6d)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Ville Syrjälä [Thu, 15 Dec 2016 17:47:34 +0000 (19:47 +0200)]
drm/i915: Workaround VLV/CHV DSI scanline counter hardware fail
The scanline counter is bonkers on VLV/CHV DSI. The scanline counter
increment is not lined up with the start of vblank like it is on
every other platform and output type. This causes problems for
both the vblank timestamping and atomic update vblank evasion.
On my FFRD8 machine at least, the scanline counter increment
happens about 1/3 of a scanline ahead of the start of vblank (which
is where all register latching happens still). That means we can't
trust the scanline counter to tell us whether we're in vblank or not
while we're on that particular line. In order to keep vblank
timestamping in working condition when called from the vblank irq,
we'll leave scanline_offset at one, which means that the entire
line containing the start of vblank is considered to be inside
the vblank.
For the vblank evasion we'll need to consider that entire line
to be bad, since we can't tell whether the registers already
got latched or not. And we can't actually use the start of vblank
interrupt to get us past that line as the interrupt would fire
too soon, and then we'd up waiting for the next start of vblank
instead. One way around that would using the frame start
interrupt instead since that wouldn't fire until the next
scanline, but that would require some bigger changes in the
interrupt code. So for simplicity we'll just poll until we get
past the bad line.
v2: Adjust the comments a bit
Cc: stable@vger.kernel.org
Cc: Jonas Aaberg <cja@gmx.net>
Tested-by: Jonas Aaberg <cja@gmx.net>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=99086
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161215174734.28779-1-ville.syrjala@linux.intel.com
Tested-by: Mika Kahola <mika.kahola@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
(cherry picked from commit
ec1b4ee2834e66884e5b0d3d465f347ff212e372)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Chris Wilson [Sun, 21 May 2017 12:40:14 +0000 (13:40 +0100)]
drm/i915: Fix logical inversion for gen4 quirking
The assertion that we want to make before disabling the pin of the pages
for the unknown swizzling quirk is that the quirk is indeed active, and
that the quirk is disabled before we do apply it to the pages.
Fixes:
2c3a3f44dc13 ("drm/i915: Fix pages pin counting around swizzle quirk")
Fixes:
957870f93412 ("drm/i915: Split out i915_gem_object_set_tiling()")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170521124014.27678-1-chris@chris-wilson.co.uk
Reviewed-bhy: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
(cherry picked from commit
20bb377106af69d16269b1837e9a945b9f508a2e)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Chris Wilson [Wed, 31 May 2017 19:05:14 +0000 (20:05 +0100)]
drm/i915: Guard against i915_ggtt_disable_guc() being invoked unconditionally
Commit
7c3f86b6dc51 ("drm/i915: Invalidate the guc ggtt TLB upon
insertion") added the restoration of the invalidation routine after the
GuC was disabled, but missed that the GuC was unconditionally disabled
when not used. This then overwrites the invalidate routine for the older
chipsets, causing havoc and breaking resume as the most obvious victim.
We place the guard inside i915_ggtt_disable_guc() to be backport
friendly (the bug was introduced into v4.11) but it would be preferred
to be in more control over when this was guard (i.e. do not try and
teardown the data structures before we have enabled them). That should
be true with the reorganisation of the guc loaders.
Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Fixes:
7c3f86b6dc51 ("drm/i915: Invalidate the guc ggtt TLB upon insertion")
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Oscar Mateo <oscar.mateo@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Arkadiusz Hiler <arkadiusz.hiler@intel.com>
Cc: <stable@vger.kernel.org> # v4.11+
Link: http://patchwork.freedesktop.org/patch/msgid/20170531190514.3691-1-chris@chris-wilson.co.uk
Reviewed-by: Michel Thierry <michel.thierry@intel.com>
(cherry picked from commit
cb60606d835ca8b2f744835116bcabe64ce88849)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Maarten Lankhorst [Wed, 31 May 2017 15:42:36 +0000 (17:42 +0200)]
drm/i915: Always recompute watermarks when distrust_bios_wm is set, v2.
On some systems there can be a race condition in which no crtc state is
added to the first atomic commit. This results in all crtc's having a
null DDB allocation, causing a FIFO underrun on any update until the
first modeset.
Changes since v1:
- Do not take the connection_mutex, this is already done below.
Reported-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Inspired-by: Mahesh Kumar <mahesh1.kumar@intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Fixes:
98d39494d375 ("drm/i915/gen9: Compute DDB allocation at atomic
check time (v4)")
Cc: <stable@vger.kernel.org> # v4.8+
Cc: Mahesh Kumar <mahesh1.kumar@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170531154236.27180-1-maarten.lankhorst@linux.intel.com
Reviewed-by: Mahesh Kumar <mahesh1.kumar@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
(cherry picked from commit
367d73d2806085bb507ab44c1f532640917fd5ca)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Imre Deak [Tue, 2 May 2017 12:04:09 +0000 (15:04 +0300)]
drm/i915: Prevent the system suspend complete optimization
Since
commit
bac2a909a096c9110525c18cbb8ce73c660d5f71
Author: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Date: Wed Jan 21 02:17:42 2015 +0100
PCI / PM: Avoid resuming PCI devices during system suspend
PCI devices will default to allowing the system suspend complete
optimization where devices are not woken up during system suspend if
they were already runtime suspended. This however breaks the i915/HDA
drivers for two reasons:
- The i915 driver has system suspend specific steps that it needs to
run, that bring the device to a different state than its runtime
suspended state.
- The HDA driver's suspend handler requires power that it will request
from the i915 driver's power domain handler. This in turn requires the
i915 driver to runtime resume itself, but this won't be possible if the
suspend complete optimization is in effect: in this case the i915
runtime PM is disabled and trying to get an RPM reference returns
-EACCESS.
Solve this by requiring the PCI/PM core to resume the device during
system suspend which in effect disables the suspend complete optimization.
Regardless of the above commit the optimization stayed disabled for DRM
devices until
commit
d14d2a8453d650bea32a1c5271af1458cd283a0f
Author: Lukas Wunner <lukas@wunner.de>
Date: Wed Jun 8 12:49:29 2016 +0200
drm: Remove dev_pm_ops from drm_class
so this patch is in practice a fix for this commit. Another reason for
the bug staying hidden for so long is that the optimization for a device
is disabled if it's disabled for any of its children devices. i915 may
have a backlight device as its child which doesn't support runtime PM
and so doesn't allow the optimization either. So if this backlight
device got registered the bug stayed hidden.
Credits to Marta, Tomi and David who enabled pstore logging,
that caught one instance of this issue across a suspend/
resume-to-ram and Ville who rememberd that the optimization was enabled
for some devices at one point.
The first WARN triggered by the problem:
[ 6250.746445] WARNING: CPU: 2 PID: 17384 at drivers/gpu/drm/i915/intel_runtime_pm.c:2846 intel_runtime_pm_get+0x6b/0xd0 [i915]
[ 6250.746448] pm_runtime_get_sync() failed: -13
[ 6250.746451] Modules linked in: snd_hda_intel i915 vgem snd_hda_codec_hdmi x86_pkg_temp_thermal intel_powerclamp coretemp crct10dif_pclmul crc32_pclmul
snd_hda_codec_realtek snd_hda_codec_generic ghash_clmulni_intel e1000e snd_hda_codec snd_hwdep snd_hda_core ptp mei_me pps_core snd_pcm lpc_ich mei prime_
numbers i2c_hid i2c_designware_platform i2c_designware_core [last unloaded: i915]
[ 6250.746512] CPU: 2 PID: 17384 Comm: kworker/u8:0 Tainted: G U W 4.11.0-rc5-CI-CI_DRM_334+ #1
[ 6250.746515] Hardware name: /NUC5i5RYB, BIOS RYBDWi35.86A.0362.2017.0118.0940 01/18/2017
[ 6250.746521] Workqueue: events_unbound async_run_entry_fn
[ 6250.746525] Call Trace:
[ 6250.746530] dump_stack+0x67/0x92
[ 6250.746536] __warn+0xc6/0xe0
[ 6250.746542] ? pci_restore_standard_config+0x40/0x40
[ 6250.746546] warn_slowpath_fmt+0x46/0x50
[ 6250.746553] ? __pm_runtime_resume+0x56/0x80
[ 6250.746584] intel_runtime_pm_get+0x6b/0xd0 [i915]
[ 6250.746610] intel_display_power_get+0x1b/0x40 [i915]
[ 6250.746646] i915_audio_component_get_power+0x15/0x20 [i915]
[ 6250.746654] snd_hdac_display_power+0xc8/0x110 [snd_hda_core]
[ 6250.746661] azx_runtime_resume+0x218/0x280 [snd_hda_intel]
[ 6250.746667] pci_pm_runtime_resume+0x76/0xa0
[ 6250.746672] __rpm_callback+0xb4/0x1f0
[ 6250.746677] ? pci_restore_standard_config+0x40/0x40
[ 6250.746682] rpm_callback+0x1f/0x80
[ 6250.746686] ? pci_restore_standard_config+0x40/0x40
[ 6250.746690] rpm_resume+0x4ba/0x740
[ 6250.746698] __pm_runtime_resume+0x49/0x80
[ 6250.746703] pci_pm_suspend+0x57/0x140
[ 6250.746709] dpm_run_callback+0x6f/0x330
[ 6250.746713] ? pci_pm_freeze+0xe0/0xe0
[ 6250.746718] __device_suspend+0xf9/0x370
[ 6250.746724] ? dpm_watchdog_set+0x60/0x60
[ 6250.746730] async_suspend+0x1a/0x90
[ 6250.746735] async_run_entry_fn+0x34/0x160
[ 6250.746741] process_one_work+0x1f2/0x6d0
[ 6250.746749] worker_thread+0x49/0x4a0
[ 6250.746755] kthread+0x107/0x140
[ 6250.746759] ? process_one_work+0x6d0/0x6d0
[ 6250.746763] ? kthread_create_on_node+0x40/0x40
[ 6250.746768] ret_from_fork+0x2e/0x40
[ 6250.746778] ---[ end trace
102a62fd2160f5e6 ]---
v2:
- Use the new pci_dev->needs_resume flag, to avoid any overhead during
the ->pm_prepare hook. (Rafael)
v3:
- Update commit message to reference the actual regressing commit.
(Lukas)
v4:
- Rebase on v4 of patch 1/2.
Fixes:
d14d2a8453d6 ("drm: Remove dev_pm_ops from drm_class")
References: https://bugs.freedesktop.org/show_bug.cgi?id=100378
References: https://bugs.freedesktop.org/show_bug.cgi?id=100770
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Marta Lofstedt <marta.lofstedt@intel.com>
Cc: David Weinehall <david.weinehall@linux.intel.com>
Cc: Tomi Sarvela <tomi.p.sarvela@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Lukas Wunner <lukas@wunner.de>
Cc: linux-pci@vger.kernel.org
Cc: <stable@vger.kernel.org> # v4.10.x: 4d071c3 - PCI/PM: Add needs_resume flag
Cc: <stable@vger.kernel.org> # v4.10.x
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reported-and-tested-by: Marta Lofstedt <marta.lofstedt@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1493726649-32094-2-git-send-email-imre.deak@intel.com
(cherry picked from commit
adfdf85d795f4d4f487b61ee0b169d64c6e19081)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Nagaraju, Vathsala [Thu, 25 May 2017 16:43:29 +0000 (22:13 +0530)]
drm/i915/psr: disable psr2 for resolution greater than 32X20
psr1 is also disabled for panel resolution greater than 32X20.
Added psr2 check to disable only for psr2 panels having resolution
greater than 32X20.
issue was introduced by
commit-id : "
acf45d11050abd751dcec986ab121cb2367dcbba"
commit message: "PSR2 is restricted to work with panel resolutions
upto 3200x2000, move the check to intel_psr_match_conditions and fully
block psr."
v2: (Rodrigo)
Add previous commit details which introduced the issue
Fixes:
acf45d11050a ("drm/i915/psr: disable psr2 for resolution greater than 32X20")
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Jim Bride <jim.bride@linux.intel.com>
Cc: Yaroslav Shabalin <yaroslav.shabalin@gmail.com>
Reported-by: Yaroslav Shabalin <yaroslav.shabalin@gmail.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: vathsala nagaraju <vathsala.nagaraju@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/49935bdff896ee3140bed471012b9f9110a863a4.1495729964.git.vathsala.nagaraju@intel.com
(cherry picked from commit
bef8c056fba09aa4629fe5a2d3efe64068d049db)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Chris Wilson [Tue, 30 May 2017 12:13:33 +0000 (13:13 +0100)]
drm/i915: Hold a wakeref for probing the ring registers
Allow intel_engine_is_idle() to be called outside of the GT wakeref by
acquiring the device runtime pm for ourselves. This allows the function
to act as check after we assume the engine is idle and we release the GT
wakeref held whilst we have requests. At the moment, we do not call it
outside of an awake context but taking the wakeref as required makes it
more convenient to use for quick debugging in future.
[ 2613.401647] RPM wakelock ref not held during HW access
[ 2613.401684] ------------[ cut here ]------------
[ 2613.401720] WARNING: CPU: 5 PID: 7739 at drivers/gpu/drm/i915/intel_drv.h:1787 gen6_read32+0x21f/0x2b0 [i915]
[ 2613.401731] Modules linked in: snd_hda_intel i915 vgem snd_hda_codec_hdmi x86_pkg_temp_thermal intel_powerclamp snd_hda_codec_realtek coretemp snd_hda_codec_generic crct10dif_pclmul crc32_pclmul ghash_clmulni_intel snd_hda_codec snd_hwdep snd_hda_core snd_pcm r8169 mii mei_me lpc_ich mei prime_numbers [last unloaded: i915]
[ 2613.401823] CPU: 5 PID: 7739 Comm: drv_missed_irq Tainted: G U 4.12.0-rc2-CI-CI_DRM_421+ #1
[ 2613.401825] Hardware name: MSI MS-7924/Z97M-G43(MS-7924), BIOS V1.12 02/15/2016
[ 2613.401840] task:
ffff880409e3a740 task.stack:
ffffc900084dc000
[ 2613.401861] RIP: 0010:gen6_read32+0x21f/0x2b0 [i915]
[ 2613.401863] RSP: 0018:
ffffc900084dfce8 EFLAGS:
00010292
[ 2613.401869] RAX:
000000000000002a RBX:
ffff8804016a8000 RCX:
0000000000000006
[ 2613.401871] RDX:
0000000000000006 RSI:
ffffffff81cbf2d9 RDI:
ffffffff81c9e3a7
[ 2613.401874] RBP:
ffffc900084dfd18 R08:
ffff880409e3afc8 R09:
0000000000000000
[ 2613.401877] R10:
000000008a1c483f R11:
0000000000000000 R12:
000000000000209c
[ 2613.401879] R13:
0000000000000001 R14:
ffff8804016a8000 R15:
ffff8804016ac150
[ 2613.401882] FS:
00007f39ef3dd8c0(0000) GS:
ffff88041fb40000(0000) knlGS:
0000000000000000
[ 2613.401885] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[ 2613.401887] CR2:
00000000023717c8 CR3:
00000002e7b34000 CR4:
00000000001406e0
[ 2613.401889] Call Trace:
[ 2613.401912] intel_engine_is_idle+0x76/0x90 [i915]
[ 2613.401931] i915_gem_wait_for_idle+0xe6/0x1e0 [i915]
[ 2613.401951] fault_irq_set+0x40/0x90 [i915]
[ 2613.401970] i915_ring_test_irq_set+0x42/0x50 [i915]
[ 2613.401976] simple_attr_write+0xc7/0xe0
[ 2613.401981] full_proxy_write+0x4f/0x70
[ 2613.401987] __vfs_write+0x23/0x120
[ 2613.401992] ? rcu_read_lock_sched_held+0x75/0x80
[ 2613.401996] ? rcu_sync_lockdep_assert+0x2a/0x50
[ 2613.401999] ? __sb_start_write+0xfa/0x1f0
[ 2613.402004] vfs_write+0xc5/0x1d0
[ 2613.402008] ? trace_hardirqs_on_caller+0xe7/0x1c0
[ 2613.402013] SyS_write+0x44/0xb0
[ 2613.402020] entry_SYSCALL_64_fastpath+0x1c/0xb1
[ 2613.402022] RIP: 0033:0x7f39eded6670
[ 2613.402025] RSP: 002b:
00007fffdcdcb1a8 EFLAGS:
00000246 ORIG_RAX:
0000000000000001
[ 2613.402030] RAX:
ffffffffffffffda RBX:
ffffffff81470203 RCX:
00007f39eded6670
[ 2613.402033] RDX:
0000000000000001 RSI:
000000000041bc33 RDI:
0000000000000006
[ 2613.402036] RBP:
ffffc900084dff88 R08:
00007f39ef3dd8c0 R09:
0000000000000001
[ 2613.402038] R10:
0000000000000000 R11:
0000000000000246 R12:
000000000041bc33
[ 2613.402041] R13:
0000000000000006 R14:
0000000000000000 R15:
0000000000000000
[ 2613.402046] ? __this_cpu_preempt_check+0x13/0x20
[ 2613.402052] Code: 01 9b fa e0 0f ff e9 28 fe ff ff 80 3d 6a dd 0e 00 00 0f 85 29 fe ff ff 48 c7 c7 48 19 29 a0 c6 05 56 dd 0e 00 01 e8 da 9a fa e0 <0f> ff e9 0f fe ff ff b9 01 00 00 00 ba 01 00 00 00 44 89 e6 48
[ 2613.402199] ---[ end trace
31f0cfa93ab632bf ]---
Fixes:
5400367a864d ("drm/i915: Ensure the engine is idle before manually changing HWS")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170530121334.17364-2-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
(cherry picked from commit
a091d4ee931b16ce4fef945d39a20b851a7e17b7)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Chris Wilson [Tue, 30 May 2017 12:13:32 +0000 (13:13 +0100)]
drm/i915: Short-circuit i915_gem_wait_for_idle() if already idle
If the device is asleep (no GT wakeref), we know the GPU is already idle.
If we add an early return, we can avoid touching registers and checking
hw state outside of the assumed GT wakelock. This prevents causing such
errors whilst debugging:
[ 2613.401647] RPM wakelock ref not held during HW access
[ 2613.401684] ------------[ cut here ]------------
[ 2613.401720] WARNING: CPU: 5 PID: 7739 at drivers/gpu/drm/i915/intel_drv.h:1787 gen6_read32+0x21f/0x2b0 [i915]
[ 2613.401731] Modules linked in: snd_hda_intel i915 vgem snd_hda_codec_hdmi x86_pkg_temp_thermal intel_powerclamp snd_hda_codec_realtek coretemp snd_hda_codec_generic crct10dif_pclmul crc32_pclmul ghash_clmulni_intel snd_hda_codec snd_hwdep snd_hda_core snd_pcm r8169 mii mei_me lpc_ich mei prime_numbers [last unloaded: i915]
[ 2613.401823] CPU: 5 PID: 7739 Comm: drv_missed_irq Tainted: G U 4.12.0-rc2-CI-CI_DRM_421+ #1
[ 2613.401825] Hardware name: MSI MS-7924/Z97M-G43(MS-7924), BIOS V1.12 02/15/2016
[ 2613.401840] task:
ffff880409e3a740 task.stack:
ffffc900084dc000
[ 2613.401861] RIP: 0010:gen6_read32+0x21f/0x2b0 [i915]
[ 2613.401863] RSP: 0018:
ffffc900084dfce8 EFLAGS:
00010292
[ 2613.401869] RAX:
000000000000002a RBX:
ffff8804016a8000 RCX:
0000000000000006
[ 2613.401871] RDX:
0000000000000006 RSI:
ffffffff81cbf2d9 RDI:
ffffffff81c9e3a7
[ 2613.401874] RBP:
ffffc900084dfd18 R08:
ffff880409e3afc8 R09:
0000000000000000
[ 2613.401877] R10:
000000008a1c483f R11:
0000000000000000 R12:
000000000000209c
[ 2613.401879] R13:
0000000000000001 R14:
ffff8804016a8000 R15:
ffff8804016ac150
[ 2613.401882] FS:
00007f39ef3dd8c0(0000) GS:
ffff88041fb40000(0000) knlGS:
0000000000000000
[ 2613.401885] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[ 2613.401887] CR2:
00000000023717c8 CR3:
00000002e7b34000 CR4:
00000000001406e0
[ 2613.401889] Call Trace:
[ 2613.401912] intel_engine_is_idle+0x76/0x90 [i915]
[ 2613.401931] i915_gem_wait_for_idle+0xe6/0x1e0 [i915]
[ 2613.401951] fault_irq_set+0x40/0x90 [i915]
[ 2613.401970] i915_ring_test_irq_set+0x42/0x50 [i915]
[ 2613.401976] simple_attr_write+0xc7/0xe0
[ 2613.401981] full_proxy_write+0x4f/0x70
[ 2613.401987] __vfs_write+0x23/0x120
[ 2613.401992] ? rcu_read_lock_sched_held+0x75/0x80
[ 2613.401996] ? rcu_sync_lockdep_assert+0x2a/0x50
[ 2613.401999] ? __sb_start_write+0xfa/0x1f0
[ 2613.402004] vfs_write+0xc5/0x1d0
[ 2613.402008] ? trace_hardirqs_on_caller+0xe7/0x1c0
[ 2613.402013] SyS_write+0x44/0xb0
[ 2613.402020] entry_SYSCALL_64_fastpath+0x1c/0xb1
[ 2613.402022] RIP: 0033:0x7f39eded6670
[ 2613.402025] RSP: 002b:
00007fffdcdcb1a8 EFLAGS:
00000246 ORIG_RAX:
0000000000000001
[ 2613.402030] RAX:
ffffffffffffffda RBX:
ffffffff81470203 RCX:
00007f39eded6670
[ 2613.402033] RDX:
0000000000000001 RSI:
000000000041bc33 RDI:
0000000000000006
[ 2613.402036] RBP:
ffffc900084dff88 R08:
00007f39ef3dd8c0 R09:
0000000000000001
[ 2613.402038] R10:
0000000000000000 R11:
0000000000000246 R12:
000000000041bc33
[ 2613.402041] R13:
0000000000000006 R14:
0000000000000000 R15:
0000000000000000
[ 2613.402046] ? __this_cpu_preempt_check+0x13/0x20
[ 2613.402052] Code: 01 9b fa e0 0f ff e9 28 fe ff ff 80 3d 6a dd 0e 00 00 0f 85 29 fe ff ff 48 c7 c7 48 19 29 a0 c6 05 56 dd 0e 00 01 e8 da 9a fa e0 <0f> ff e9 0f fe ff ff b9 01 00 00 00 ba 01 00 00 00 44 89 e6 48
[ 2613.402199] ---[ end trace
31f0cfa93ab632bf ]---
Fixes:
25112b64b3d2 ("drm/i915: Wait for all engines to be idle as part of i915_gem_wait_for_idle()")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170530121334.17364-1-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
(cherry picked from commit
863e9fde1a7061dad09bb299c65bed5f1ccb44ff)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Kai Chen [Tue, 23 May 2017 21:58:11 +0000 (14:58 -0700)]
drm/i915: Disable decoupled MMIO
The decoupled MMIO feature doesn't work as intended by HW team. Enabling
it with forcewake will only make debugging efforts more difficult, so
let's disable it.
Fixes:
85ee17ebeedd ("drm/i915/bxt: Broxton decoupled MMIO")
Cc: Zhe Wang <zhe1.wang@intel.com>
Cc: Praveen Paneri <praveen.paneri@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: intel-gfx@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v4.10+
Signed-off-by: Kai Chen <kai.chen@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170523215812.18328-2-kai.chen@intel.com
(cherry picked from commit
0051c10acabb631cfd439eae73289e6e4c39b2b7)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Michal Wajdeczko [Thu, 18 May 2017 11:31:02 +0000 (11:31 +0000)]
drm/i915/guc: Remove stale comment for q_fail
This member was dropped long time ago.
Fixes:
774439e1 ("drm/i915/guc: re-optimise i915_guc_client layout")
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170518113104.54400-1-michal.wajdeczko@intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
(cherry picked from commit
4afc67be8e203ee8f5e95e829c0777eae7a14702)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Thomas Hellstrom [Wed, 7 Jun 2017 12:46:15 +0000 (14:46 +0200)]
drm/vmwgfx: Bump driver minor and date
While the atomic modesetting capability is signaled also elsewhere, also
reflect it by a driver minor bump.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Sinclair Yeh [Wed, 7 Jun 2017 12:24:08 +0000 (14:24 +0200)]
drm/vmwgfx: Remove unused legacy cursor functions
These function implementations and/or declarations are no longer used
now that atomic is enabled.
Signed-off-by: Sinclair Yeh <syeh@vmware.com>
Reported-by: Daniel Vetter <daniel@ffwll.ch>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Colin Ian King [Sat, 27 May 2017 18:52:30 +0000 (19:52 +0100)]
drm/vmwgfx: fix spelling mistake "exeeds" -> "exceeds"
Trivial fix to spelling mistake in DRM_ERROR error message.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
Sinclair Yeh [Fri, 2 Jun 2017 05:55:50 +0000 (07:55 +0200)]
drm/vmwgfx: Fix large topology crash
The previous attempt at this had an issue with with num_clips > 1
because it would always end up using the coordinates of the last
clip while using width and height calculated from the bounding
box of all the clips.
So if the last clip happens to be not at the top-left corner of
the bounding box, the CPU blit operation would go out of bounds.
The original intent was to coalesce all the clips into one blit,
and to do that we need to also track the starting point of the
content buffer.
Signed-off-by: Sinclair Yeh <syeh@vmware.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Sinclair Yeh [Fri, 2 Jun 2017 05:53:27 +0000 (07:53 +0200)]
drm/vmwgfx: Make sure to update STDU when FB is updated
When a new FB is bound, we have to send an update command otherwise
the new FB may not be shown
Signed-off-by: Sinclair Yeh <syeh@vmware.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Sinclair Yeh [Fri, 2 Jun 2017 05:50:57 +0000 (07:50 +0200)]
drm/vmwgfx: Make sure backup_handle is always valid
When vmw_gb_surface_define_ioctl() is called with an existing buffer,
we end up returning an uninitialized variable in the backup_handle.
The fix is to first initialize backup_handle to 0 just to be sure, and
second, when a user-provided buffer is found, we will use the
req->buffer_handle as the backup_handle.
Cc: <stable@vger.kernel.org>
Reported-by: Murray McAllister <murray.mcallister@insomniasec.com>
Signed-off-by: Sinclair Yeh <syeh@vmware.com>
Reviewed-by: Deepak Rawat <drawat@vmware.com>
Dan Carpenter [Thu, 27 Apr 2017 09:12:08 +0000 (12:12 +0300)]
drm/vmwgfx: Handle vmalloc() failure in vmw_local_fifo_reserve()
If vmalloc() fails then we need to a bit of cleanup before returning.
Cc: <stable@vger.kernel.org>
Fixes:
fb1d9738ca05 ("drm/vmwgfx: Add DRM driver for VMware Virtual GPU")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
Sinclair Yeh [Fri, 2 Jun 2017 05:44:53 +0000 (07:44 +0200)]
drm/vmwgfx: Don't create proxy surface for cursor
With atomic, the cursor surface is treated like a FB. Creating
a proxy surface for cursor doesn't gain us much benefit.
This fixes the issue on atomic enabled 2D VMs where the cursor
disappears.
Signed-off-by: Sinclair Yeh <syeh@vmware.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Vladis Dronov [Fri, 2 Jun 2017 05:42:09 +0000 (07:42 +0200)]
drm/vmwgfx: limit the number of mip levels in vmw_gb_surface_define_ioctl()
The 'req->mip_levels' parameter in vmw_gb_surface_define_ioctl() is
a user-controlled 'uint32_t' value which is used as a loop count limit.
This can lead to a kernel lockup and DoS. Add check for 'req->mip_levels'.
References:
https://bugzilla.redhat.com/show_bug.cgi?id=
1437431
Cc: <stable@vger.kernel.org>
Signed-off-by: Vladis Dronov <vdronov@redhat.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
Jon Bloomfield [Wed, 24 May 2017 15:54:11 +0000 (08:54 -0700)]
drm/i915: Serialize GTT/Aperture accesses on BXT
BXT has a H/W issue with IOMMU which can lead to system hangs when
Aperture accesses are queued within the GAM behind GTT Accesses.
This patch avoids the condition by wrapping all GTT updates in stop_machine
and using a flushing read prior to restarting the machine.
The stop_machine guarantees no new Aperture accesses can begin while
the PTE writes are being emmitted. The flushing read ensures that
any following Aperture accesses cannot begin until the PTE writes
have been cleared out of the GAM's fifo.
Only FOLLOWING Aperture accesses need to be separated from in flight
PTE updates. PTE Writes may follow tightly behind already in flight
Aperture accesses, so no flushing read is required at the start of
a PTE update sequence.
This issue was reproduced by running
igt/gem_readwrite and
igt/gem_render_copy
simultaneously from different processes, each in a tight loop,
with INTEL_IOMMU enabled.
This patch was originally published as:
drm/i915: Serialize GTT Updates on BXT
[Note: This will cause a performance penalty for some use cases, but
avoiding hangs trumps performance hits. This may need to be worked
around in Mesa to recover the lost performance.]
v2: Move bxt/iommu detection into static function
Remove #ifdef CONFIG_INTEL_IOMMU protection
Make function names more reflective of purpose
Move flushing read into static function
v3: Tidy up for checkpatch.pl
Testcase: igt/gem_concurrent_blit
Signed-off-by: Jon Bloomfield <jon.bloomfield@intel.com>
Cc: John Harrison <john.C.Harrison@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: stable@vger.kernel.org
Link: http://patchwork.freedesktop.org/patch/msgid/1495641251-30022-1-git-send-email-jon.bloomfield@intel.com
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
(cherry picked from commit
0ef34ad6222abfa513117515fec720c33a58f105)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Julien Grall [Wed, 31 May 2017 13:03:57 +0000 (14:03 +0100)]
xen/privcmd: Support correctly 64KB page granularity when mapping memory
Commit
5995a68 "xen/privcmd: Add support for Linux 64KB page granularity" did
not go far enough to support 64KB in mmap_batch_fn.
The variable 'nr' is the number of 4KB chunk to map. However, when Linux
is using 64KB page granularity the array of pages (vma->vm_private_data)
contain one page per 64KB. Fix it by incrementing st->index correctly.
Furthermore, st->va is not correctly incremented as PAGE_SIZE !=
XEN_PAGE_SIZE.
Fixes:
5995a68 ("xen/privcmd: Add support for Linux 64KB page granularity")
CC: stable@vger.kernel.org
Reported-by: Feng Kan <fkan@apm.com>
Signed-off-by: Julien Grall <julien.grall@arm.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Kai-Heng Feng [Wed, 7 Jun 2017 07:25:43 +0000 (15:25 +0800)]
nvme: relax APST default max latency to 100ms
Christoph Hellwig suggests we should to make APST work out of the box.
Hence relax the the default max latency to make them able to enter
deepest power state on default.
Here are id-ctrl excerpts from two high latency NVMes:
vid : 0x14a4
ssvid : 0x1b4b
mn : CX2-GB1024-Q11 NVMe LITEON 1024GB
ps 3 : mp:0.1000W non-operational enlat:5000 exlat:5000 rrt:3 rrl:3
rwt:3 rwl:3 idle_power:- active_power:-
ps 4 : mp:0.0100W non-operational enlat:50000 exlat:100000 rrt:4 rrl:4
rwt:4 rwl:4 idle_power:- active_power:-
vid : 0x15b7
ssvid : 0x1b4b
mn : A400 NVMe SanDisk 512GB
ps 3 : mp:0.0500W non-operational enlat:51000 exlat:10000 rrt:0 rrl:0
rwt:0 rwl:0 idle_power:- active_power:-
ps 4 : mp:0.0055W non-operational enlat:
1000000 exlat:100000 rrt:0 rrl:0
rwt:0 rwl:0 idle_power:- active_power:-
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Kai-Heng Feng [Wed, 7 Jun 2017 07:25:42 +0000 (15:25 +0800)]
nvme: only consider exit latency when choosing useful non-op power states
When a NVMe is in non-op states, the latency is exlat.
The latency will be enlat + exlat only when the NVMe tries to transit
from operational state right atfer it begins to transit to
non-operational state, which should be a rare case.
Therefore, as Andy Lutomirski suggests, use exlat only when deciding power
states to trainsit to.
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
James Smart [Mon, 5 Jun 2017 22:03:42 +0000 (15:03 -0700)]
nvme-fc: fix missing put reference on controller create failure
The failure case, of a create controller request, called
nvme_uninit_ctrl() but didn't do a put to allow the nvme
controller to be deleted.
Signed-off-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
James Smart [Fri, 2 Jun 2017 05:54:21 +0000 (22:54 -0700)]
nvme-fc: on lldd/transport io error, terminate association
Per FC-NVME, when lldd or transport detects an i/o error, the
connection must be terminated, which in turn requires the association
to be termianted. Currently the transport simply creates a nvme
completion status of transport error and returns the io. The FC-NVME
spec makes the mandate as initiator and host, depending on the error,
can get out of sync on outstanding io counts (sqhd/sqtail).
Implement the association teardown on lldd or transport detected
errors.
Signed-off-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Sagi Grimberg [Mon, 5 Jun 2017 17:35:56 +0000 (20:35 +0300)]
nvme-rdma: fast fail incoming requests while we reconnect
When we encounter an transport/controller errors, error recovery
kicks in which performs:
1. stops io/admin queues
2. moves transport queues out of LIVE state
3. fast fail pending io
4. schedule periodic reconnects.
But we also need to fast fail incoming IO taht enters after we
already scheduled. Given that our queue is not LIVE anymore, simply
restart the request queues to fail in .queue_rq
Reported-by: Alex Turin <alex@vastdata.com>
Reported-by: shahar.salzman <shahar.salzman@gmail.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Cc: stable@vger.kernel.org
Rakesh Pandit [Mon, 5 Jun 2017 11:43:11 +0000 (14:43 +0300)]
nvme-pci: fix multiple ctrl removal scheduling
Commit
c5f6ce97c1210 tries to address multiple resets but fails as
work_busy doesn't involve any synchronization and can fail. This is
reproducible easily as can be seen by WARNING below which is triggered
with line:
WARN_ON(dev->ctrl.state == NVME_CTRL_RESETTING)
Allowing multiple resets can result in multiple controller removal as
well if different conditions inside nvme_reset_work fail and which
might deadlock on device_release_driver.
[ 480.327007] WARNING: CPU: 3 PID: 150 at drivers/nvme/host/pci.c:1900 nvme_reset_work+0x36c/0xec0
[ 480.327008] Modules linked in: rfcomm fuse nf_conntrack_netbios_ns nf_conntrack_broadcast...
[ 480.327044] btusb videobuf2_core ghash_clmulni_intel snd_hwdep cfg80211 acer_wmi hci_uart..
[ 480.327065] CPU: 3 PID: 150 Comm: kworker/u16:2 Not tainted 4.12.0-rc1+ #13
[ 480.327065] Hardware name: Acer Predator G9-591/Mustang_SLS, BIOS V1.10 03/03/2016
[ 480.327066] Workqueue: nvme nvme_reset_work
[ 480.327067] task:
ffff880498ad8000 task.stack:
ffffc90002218000
[ 480.327068] RIP: 0010:nvme_reset_work+0x36c/0xec0
[ 480.327069] RSP: 0018:
ffffc9000221bdb8 EFLAGS:
00010246
[ 480.327070] RAX:
0000000000460000 RBX:
ffff880498a98128 RCX:
dead000000000200
[ 480.327070] RDX:
0000000000000001 RSI:
ffff8804b1028020 RDI:
ffff880498a98128
[ 480.327071] RBP:
ffffc9000221be50 R08:
0000000000000000 R09:
0000000000000000
[ 480.327071] R10:
ffffc90001963ce8 R11:
000000000000020d R12:
ffff880498a98000
[ 480.327072] R13:
ffff880498a53500 R14:
ffff880498a98130 R15:
ffff880498a98128
[ 480.327072] FS:
0000000000000000(0000) GS:
ffff8804c1cc0000(0000) knlGS:
0000000000000000
[ 480.327073] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[ 480.327074] CR2:
00007ffcf3c37f78 CR3:
0000000001e09000 CR4:
00000000003406e0
[ 480.327074] DR0:
0000000000000000 DR1:
0000000000000000 DR2:
0000000000000000
[ 480.327075] DR3:
0000000000000000 DR6:
00000000fffe0ff0 DR7:
0000000000000400
[ 480.327075] Call Trace:
[ 480.327079] ? __switch_to+0x227/0x400
[ 480.327081] process_one_work+0x18c/0x3a0
[ 480.327082] worker_thread+0x4e/0x3b0
[ 480.327084] kthread+0x109/0x140
[ 480.327085] ? process_one_work+0x3a0/0x3a0
[ 480.327087] ? kthread_park+0x60/0x60
[ 480.327102] ret_from_fork+0x2c/0x40
[ 480.327103] Code: e8 5a dc ff ff 85 c0 41 89 c1 0f.....
This patch addresses the problem by using state of controller to
decide whether reset should be queued or not as state change is
synchronizated using controller spinlock. Also cancel_work_sync is
used to make sure remove cancels the reset_work and waits for it to
finish. This patch also changes return value from -ENODEV to more
appropriate -EBUSY if nvme_reset fails to change state.
Fixes:
c5f6ce97c1210 ("nvme: don't schedule multiple resets")
Signed-off-by: Rakesh Pandit <rakesh@tuxera.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Ming Lei [Fri, 2 Jun 2017 08:32:08 +0000 (16:32 +0800)]
nvme: fix hang in remove path
We need to start admin queues too in nvme_kill_queues()
for avoiding hang in remove path[1].
This patch is very similar with
806f026f9b901eaf(nvme: use
blk_mq_start_hw_queues() in nvme_kill_queues()).
[1] hang stack trace
[<
ffffffff813c9716>] blk_execute_rq+0x56/0x80
[<
ffffffff815cb6e9>] __nvme_submit_sync_cmd+0x89/0xf0
[<
ffffffff815ce7be>] nvme_set_features+0x5e/0x90
[<
ffffffff815ce9f6>] nvme_configure_apst+0x166/0x200
[<
ffffffff815cef45>] nvme_set_latency_tolerance+0x35/0x50
[<
ffffffff8157bd11>] apply_constraint+0xb1/0xc0
[<
ffffffff8157cbb4>] dev_pm_qos_constraints_destroy+0xf4/0x1f0
[<
ffffffff8157b44a>] dpm_sysfs_remove+0x2a/0x60
[<
ffffffff8156d951>] device_del+0x101/0x320
[<
ffffffff8156db8a>] device_unregister+0x1a/0x60
[<
ffffffff8156dc4c>] device_destroy+0x3c/0x50
[<
ffffffff815cd295>] nvme_uninit_ctrl+0x45/0xa0
[<
ffffffff815d4858>] nvme_remove+0x78/0x110
[<
ffffffff81452b69>] pci_device_remove+0x39/0xb0
[<
ffffffff81572935>] device_release_driver_internal+0x155/0x210
[<
ffffffff81572a02>] device_release_driver+0x12/0x20
[<
ffffffff815d36fb>] nvme_remove_dead_ctrl_work+0x6b/0x70
[<
ffffffff810bf3bc>] process_one_work+0x18c/0x3a0
[<
ffffffff810bf61e>] worker_thread+0x4e/0x3b0
[<
ffffffff810c5ac9>] kthread+0x109/0x140
[<
ffffffff8185800c>] ret_from_fork+0x2c/0x40
[<
ffffffffffffffff>] 0xffffffffffffffff
Fixes:
c5552fde102fc("nvme: Enable autonomous power state transitions")
Reported-by: Rakesh Pandit <rakesh@tuxera.com>
Tested-by: Rakesh Pandit <rakesh@tuxera.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Takashi Iwai [Fri, 2 Jun 2017 15:26:56 +0000 (17:26 +0200)]
ALSA: timer: Fix missing queue indices reset at SNDRV_TIMER_IOCTL_SELECT
snd_timer_user_tselect() reallocates the queue buffer dynamically, but
it forgot to reset its indices. Since the read may happen
concurrently with ioctl and snd_timer_user_tselect() allocates the
buffer via kmalloc(), this may lead to the leak of uninitialized
kernel-space data, as spotted via KMSAN:
BUG: KMSAN: use of unitialized memory in snd_timer_user_read+0x6c4/0xa10
CPU: 0 PID: 1037 Comm: probe Not tainted 4.11.0-rc5+ #2739
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:16
dump_stack+0x143/0x1b0 lib/dump_stack.c:52
kmsan_report+0x12a/0x180 mm/kmsan/kmsan.c:1007
kmsan_check_memory+0xc2/0x140 mm/kmsan/kmsan.c:1086
copy_to_user ./arch/x86/include/asm/uaccess.h:725
snd_timer_user_read+0x6c4/0xa10 sound/core/timer.c:2004
do_loop_readv_writev fs/read_write.c:716
__do_readv_writev+0x94c/0x1380 fs/read_write.c:864
do_readv_writev fs/read_write.c:894
vfs_readv fs/read_write.c:908
do_readv+0x52a/0x5d0 fs/read_write.c:934
SYSC_readv+0xb6/0xd0 fs/read_write.c:1021
SyS_readv+0x87/0xb0 fs/read_write.c:1018
This patch adds the missing reset of queue indices. Together with the
previous fix for the ioctl/read race, we cover the whole problem.
Reported-by: Alexander Potapenko <glider@google.com>
Tested-by: Alexander Potapenko <glider@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Fri, 2 Jun 2017 13:03:38 +0000 (15:03 +0200)]
ALSA: timer: Fix race between read and ioctl
The read from ALSA timer device, the function snd_timer_user_tread(),
may access to an uninitialized struct snd_timer_user fields when the
read is concurrently performed while the ioctl like
snd_timer_user_tselect() is invoked. We have already fixed the races
among ioctls via a mutex, but we seem to have forgotten the race
between read vs ioctl.
This patch simply applies (more exactly extends the already applied
range of) tu->ioctl_lock in snd_timer_user_tread() for closing the
race window.
Reported-by: Alexander Potapenko <glider@google.com>
Tested-by: Alexander Potapenko <glider@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Alexander Sverdlin [Mon, 22 May 2017 13:30:21 +0000 (15:30 +0200)]
MAINTAINERS: EP93XX: Update maintainership
As agreed with Ryan, change the maintainership.
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Acked-by: Ryan Mallon <rmallon@gmail.com>
Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Rafael J. Wysocki [Tue, 6 Jun 2017 22:57:37 +0000 (00:57 +0200)]
Revert "ACPI / sleep: Ignore spurious SCI wakeups from suspend-to-idle"
Revert commit
eed4d47efe95 (ACPI / sleep: Ignore spurious SCI wakeups
from suspend-to-idle) as it turned out to be premature and triggered
a number of different issues on various systems.
That includes, but is not limited to, premature suspend-to-RAM aborts
on Dell XPS 13 (9343) reported by Dominik.
The issue the commit in question attempted to address is real and
will need to be taken care of going forward, but evidently more work
is needed for this purpose.
Reported-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Linus Torvalds [Tue, 6 Jun 2017 21:30:17 +0000 (14:30 -0700)]
Merge git://git./linux/kernel/git/davem/net
Pull networking fixes from David Miller:
1) Made TCP congestion control documentation match current reality,
from Anmol Sarma.
2) Various build warning and failure fixes from Arnd Bergmann.
3) Fix SKB list leak in ipv6_gso_segment().
4) Use after free in ravb driver, from Eugeniu Rosca.
5) Don't use udp_poll() in ping protocol driver, from Eric Dumazet.
6) Don't crash in PCI error recovery of cxgb4 driver, from Guilherme
Piccoli.
7) _SRC_NAT_DONE_BIT needs to be cleared using atomics, from Liping
Zhang.
8) Use after free in vxlan deletion, from Mark Bloch.
9) Fix ordering of NAPI poll enabled in ethoc driver, from Max
Filippov.
10) Fix stmmac hangs with TSO, from Niklas Cassel.
11) Fix crash in CALIPSO ipv6, from Richard Haines.
12) Clear nh_flags properly on mpls link up. From Roopa Prabhu.
13) Fix regression in sk_err socket error queue handling, noticed by
ping applications. From Soheil Hassas Yeganeh.
14) Update mlx4/mlx5 MAINTAINERS information.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (78 commits)
net: stmmac: fix a broken u32 less than zero check
net: stmmac: fix completely hung TX when using TSO
net: ethoc: enable NAPI before poll may be scheduled
net: bridge: fix a null pointer dereference in br_afspec
ravb: Fix use-after-free on `ifconfig eth0 down`
net/ipv6: Fix CALIPSO causing GPF with datagram support
net: stmmac: ensure jumbo_frm error return is correctly checked for -ve value
Revert "sit: reload iphdr in ipip6_rcv"
i40e/i40evf: proper update of the page_offset field
i40e: Fix state flags for bit set and clean operations of PF
iwlwifi: fix host command memory leaks
iwlwifi: fix min API version for 7265D, 3168, 8000 and 8265
iwlwifi: mvm: clear new beacon command template struct
iwlwifi: mvm: don't fail when removing a key from an inexisting sta
iwlwifi: pcie: only use d0i3 in suspend/resume if system_pm is set to d0i3
iwlwifi: mvm: fix firmware debug restart recording
iwlwifi: tt: move ucode_loaded check under mutex
iwlwifi: mvm: support ibss in dqa mode
iwlwifi: mvm: Fix command queue number on d0i3 flow
iwlwifi: mvm: rs: start using LQ command color
...
Linus Torvalds [Tue, 6 Jun 2017 21:28:18 +0000 (14:28 -0700)]
Merge git://git./linux/kernel/git/davem/sparc
Pull sparc fixes from David Miller:
1) Fix TLB context wrap races, from Pavel Tatashin.
2) Cure some gcc-7 build issues.
3) Handle invalid setup_hugepagesz command line values properly, from
Liam R Howlett.
4) Copy TSB using the correct address shift for the huge TSB, from Mike
Kravetz.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
sparc64: delete old wrap code
sparc64: new context wrap
sparc64: add per-cpu mm of secondary contexts
sparc64: redefine first version
sparc64: combine activate_mm and switch_mm
sparc64: reset mm cpumask after wrap
sparc/mm/hugepages: Fix setup_hugepagesz for invalid values.
sparc: Machine description indices can vary
sparc64: mm: fix copy_tsb to correctly copy huge page TSBs
arch/sparc: support NR_CPUS = 4096
sparc64: Add __multi3 for gcc 7.x and later.
sparc64: Fix build warnings with gcc 7.
arch/sparc: increase CONFIG_NODES_SHIFT on SPARC64 to 5
David Rientjes [Tue, 6 Jun 2017 20:36:24 +0000 (13:36 -0700)]
compiler, clang: suppress warning for unused static inline functions
GCC explicitly does not warn for unused static inline functions for
-Wunused-function. The manual states:
Warn whenever a static function is declared but not defined or
a non-inline static function is unused.
Clang does warn for static inline functions that are unused.
It turns out that suppressing the warnings avoids potentially complex
#ifdef directives, which also reduces LOC.
Suppress the warning for clang.
Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
David S. Miller [Tue, 6 Jun 2017 20:45:48 +0000 (13:45 -0700)]
Merge branch 'sparc64-context-wrap-fixes'
Pavel Tatashin says:
====================
sparc64: context wrap fixes
This patch series contains fixes for context wrap: when we are out of
context ids, and need to get a new version.
It fixes memory corruption issues which happen when more than number of
context ids (currently set to 8K) number of processes are started
simultaneously, and processes can get a wrong context.
sparc64: new context wrap:
- contains explanation of new wrap method, and also explanation of races
that it solves
sparc64: reset mm cpumask after wrap
- explains issue of not reseting cpu mask on a wrap
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Pavel Tatashin [Wed, 31 May 2017 15:25:25 +0000 (11:25 -0400)]
sparc64: delete old wrap code
The old method that is using xcall and softint to get new context id is
deleted, as it is replaced by a method of using per_cpu_secondary_mm
without xcall to perform the context wrap.
Signed-off-by: Pavel Tatashin <pasha.tatashin@oracle.com>
Reviewed-by: Bob Picco <bob.picco@oracle.com>
Reviewed-by: Steven Sistare <steven.sistare@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pavel Tatashin [Wed, 31 May 2017 15:25:24 +0000 (11:25 -0400)]
sparc64: new context wrap
The current wrap implementation has a race issue: it is called outside of
the ctx_alloc_lock, and also does not wait for all CPUs to complete the
wrap. This means that a thread can get a new context with a new version
and another thread might still be running with the same context. The
problem is especially severe on CPUs with shared TLBs, like sun4v. I used
the following test to very quickly reproduce the problem:
- start over 8K processes (must be more than context IDs)
- write and read values at a memory location in every process.
Very quickly memory corruptions start happening, and what we read back
does not equal what we wrote.
Several approaches were explored before settling on this one:
Approach 1:
Move smp_new_mmu_context_version() inside ctx_alloc_lock, and wait for
every process to complete the wrap. (Note: every CPU must WAIT before
leaving smp_new_mmu_context_version_client() until every one arrives).
This approach ends up with deadlocks, as some threads own locks which other
threads are waiting for, and they never receive softint until these threads
exit smp_new_mmu_context_version_client(). Since we do not allow the exit,
deadlock happens.
Approach 2:
Handle wrap right during mondo interrupt. Use etrap/rtrap to enter into
into C code, and issue new versions to every CPU.
This approach adds some overhead to runtime: in switch_mm() we must add
some checks to make sure that versions have not changed due to wrap while
we were loading the new secondary context. (could be protected by PSTATE_IE
but that degrades performance as on M7 and older CPUs as it takes 50 cycles
for each access). Also, we still need a global per-cpu array of MMs to know
where we need to load new contexts, otherwise we can change context to a
thread that is going way (if we received mondo between switch_mm() and
switch_to() time). Finally, there are some issues with window registers in
rtrap() when context IDs are changed during CPU mondo time.
The approach in this patch is the simplest and has almost no impact on
runtime. We use the array with mm's where last secondary contexts were
loaded onto CPUs and bump their versions to the new generation without
changing context IDs. If a new process comes in to get a context ID, it
will go through get_new_mmu_context() because of version mismatch. But the
running processes do not need to be interrupted. And wrap is quicker as we
do not need to xcall and wait for everyone to receive and complete wrap.
Signed-off-by: Pavel Tatashin <pasha.tatashin@oracle.com>
Reviewed-by: Bob Picco <bob.picco@oracle.com>
Reviewed-by: Steven Sistare <steven.sistare@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pavel Tatashin [Wed, 31 May 2017 15:25:23 +0000 (11:25 -0400)]
sparc64: add per-cpu mm of secondary contexts
The new wrap is going to use information from this array to figure out
mm's that currently have valid secondary contexts setup.
Signed-off-by: Pavel Tatashin <pasha.tatashin@oracle.com>
Reviewed-by: Bob Picco <bob.picco@oracle.com>
Reviewed-by: Steven Sistare <steven.sistare@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pavel Tatashin [Wed, 31 May 2017 15:25:22 +0000 (11:25 -0400)]
sparc64: redefine first version
CTX_FIRST_VERSION defines the first context version, but also it defines
first context. This patch redefines it to only include the first context
version.
Signed-off-by: Pavel Tatashin <pasha.tatashin@oracle.com>
Reviewed-by: Bob Picco <bob.picco@oracle.com>
Reviewed-by: Steven Sistare <steven.sistare@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
projects / GitHub / LineageOS / android_kernel_motorola_exynos9610.git / log