scsi: ufs: change an order of vs resume and power control

Change-Id: Ic608651530d6e3b92c0aafe4f03be95844b939c0
Signed-off-by: hgchu <hg.chu@samsung.com>

scsi: ufs: enter hibernation when requested link mode is off

Change-Id: Iab8b25ee8b9f12cf060f265fd6b14f234a5c9b32
Signed-off-by: hgchu <hg.chu@samsung.com>

scsi: do not async suspend for scsi devices

Change-Id: I19209feb10653ef0ddb08c242004cad080469233
Signed-off-by: hgchu <hg.chu@samsung.com>

scsi: ufs: add pre clock controls.

Change-Id: I0356bd21c9a698b9c7d82682cc10b5fbd3127a8a
Signed-off-by: hgchu <hg.chu@samsung.com>

scsi: ufs: remove forced selection of ondemand governor

Change-Id: I8a98ed11daaac67fa74bc6bf2b02d13603bc408c
Signed-off-by: hgchu <hg.chu@samsung.com>

scsi: ufs: move unmap from ISR to Soft IRQ

Change-Id: I4cbdb3904838ffdb82338b71463f523020d51f53
Signed-off-by: hgchu <hg.chu@samsung.com>

scsi: change scsi_softirq_done as external

Change-Id: I1f25d7054c3868f77d4589425455ccd8fcf04969
Signed-off-by: hgchu <hg.chu@samsung.com>

scsi: ufs: load debugging information to memory

Change-Id: I88953cc61f44795b5c90186a0214e2c659f31b67
Signed-off-by: hgchu <hg.chu@samsung.com>

[COMMON] ufs: exynos: fix race of error recovery

There are some race condition.when hci sfr dump starts in error handler,
if hibernation exit function send uic cmd with uic errors then race happens.
Therefore we make hibernation exit skip to send uic cmd when uic errors
happens.

Change-Id: I261f1cecca4210ddda6088d784790923373ae18d
Signed-off-by: hgchu <hg.chu@samsung.com>

scsi: ufs: use link lost interrupt

Change-Id: Idd5cf6b68d03cd3756536cf67e2151e7ba575866
Signed-off-by: hgchu <hg.chu@samsung.com>

scsi: ufs: fix data segment length for upiu header

Change-Id: I3f1c16422c32809390c83dc4391f396b9e9b0ad6
Signed-off-by: hgchu <hg.chu@samsung.com>

scsi: ufs: add dedicated workqueue with high priority

Change-Id: Id317ef9527702ae7a2d5b85f51fddc0a4aaa5c84
Signed-off-by: hgchu <hg.chu@samsung.com>

scsi: ufs: clean-up remained cmd on abort-handling

Change-Id: Iee3000f142cd9ef969f351c22810d7f17724c29f
Signed-off-by: hgchu <hg.chu@samsung.com>

scsi: ufs: guarantee link's active state for device management

Change-Id: I5655825ab08281495abd0051a4c73799a32cee3d
Signed-off-by: hgchu <hg.chu@samsung.com>

scsi: ufs: fix ufs power mode and link power state

Change-Id: Id9e4677e5e8c71aa060a922b75eba8a84f42d00d
Signed-off-by: hgchu <hg.chu@samsung.com>

scsi: ufs: do not permit hibernation op during link-setup

Change-Id: I2a2e1bb7896030c87289ce13748b48be7cc6146f
Signed-off-by: hgchu <hg.chu@samsung.com>

scsi: ufs: prevent i/o request during recovery-seq

Change-Id: I658dd2d95dcda721a9cd8ee8af50968975adc718
Signed-off-by: hgchu <hg.chu@samsung.com>

scsi: ufs: recover link state after entering hibernation fails

Change-Id: I9dccb778410033510e6e38ee399c93ce721a4a36
Signed-off-by: hgchu <hg.chu@samsung.com>

scsi: ufs: allow fake clock gating

Change-Id: Iff1f258be4ec2375e32bbea85f0fb49d97c87d18
Signed-off-by: hgchu <hg.chu@samsung.com>

scsi: ufs: guarantee hold and release for vendor's operation

Change-Id: I966cd27b854a8fff23c76fbd01ae8c638d01f1d8
Signed-off-by: hgchu <hg.chu@samsung.com>

scsi: ufs: detect data link error and recovery

Change-Id: I7418d2c071e737b1a4de5248e97bb0735af65975
Signed-off-by: hgchu <hg.chu@samsung.com>

scsi: ufs: don't do anything during error recovery during error

Change-Id: Ie43735be58a7afd20a32e88e73b7a11a29db28a3
Signed-off-by: hgchu <hg.chu@samsung.com>

scsi: ufs: add caps info for platform init

Change-Id: I70fccbd21232c6e41fad7841a4c21c951a3b7546
Signed-off-by: hgchu <hg.chu@samsung.com>

scsi: ufs: Add support hibernation control

Change-Id: I40feacabe23011491cfb24119ba4d861dfbd738d
Signed-off-by: hgchu <hg.chu@samsung.com>

scsi: ufs: adjusted UFS power management for exynos specific

Change-Id: I151e77eb1f5f2703e33cd4e9834204a9fa66f88c
Signed-off-by: hgchu <hg.chu@samsung.com>

scsi: ufs: add error check during link setup

Change-Id: I98eafd045b2e75726e77a9907de3bae571d86093
Signed-off-by: hgchu <hg.chu@samsung.com>

scsi: ufs: identify nexus type

Change-Id: I67e722d443fbf576b7f0a5e1f10bcd84fdae71d8
Signed-off-by: hgchu <hg.chu@samsung.com>

scsi: ufs: get deivce descriptor information

Change-Id: Ifcadfbdbc0e954de726d28a7a33a1c8665123e47
Signed-off-by: hgchu <hg.chu@samsung.com>

scsi: ufs: fix to clear the bit of outstanding_tasks

Change-Id: I5f24c3783eca5102b5b3c098cfcd39d75a0f451a
Signed-off-by: hgchu <hg.chu@samsung.com>

scsi: ufs: Add sysfs node for argos

Change-Id: I89c56c18c57923ab80328ea2f2c987c50e9d12c4
Signed-off-by: hgchu <hg.chu@samsung.com>

scsi: ufs: fix error handling sequence

Change-Id: Id7a538dba09e8efe5ea43b9d0fa329717c6e78ea
Signed-off-by: hgchu <hg.chu@samsung.com>

scsi: ufs: amend ufs host for exynos8890 evt1

Change-Id: Ic77815f6364bf42af7b7c51f410fcf6f51e7c980
Signed-off-by: hgchu <hg.chu@samsung.com>

scsi: ufs: add quirks for specific ufshci

Change-Id: I4f69c3f4a465b90b31472ffe838c185298f840c4
Signed-off-by: hgchu <hg.chu@samsung.com>

scsi: ufs: add exynos host controller

Change-Id: I6009c8a9e759f04844eb2597a6a422caca38271c
Signed-off-by: hgchu <hg.chu@samsung.com>

scsi: ufs: add vendor's specific operation

Change-Id: Id53ebff96cbda110ba1d3d37fde66605edec09f7
Signed-off-by: hgchu <hg.chu@samsung.com>

[9610] firmware: add ACPM TMU plugin binary

Change-Id: I8fe6115b908ba7a0cc273cc69ba29979207c5544
Signed-off-by: yi jaeuk <ju.yi@samsung.com>

[9610] firmware: add ACPM FVP plugin binary

Change-Id: I99fd952d35cd61b49cafe01b246a6adb8024e215
Signed-off-by: yi jaeuk <ju.yi@samsung.com>

[COMMON] firmware: Makefile: convert ihex2fw

Change-Id: I1486470ff0718627fdc938a1220523e8d1cf3f19
Signed-off-by: yi jaeuk <ju.yi@samsung.com>

[COMMON] support exynos in-kernel firmware

Change-Id: I7bc8caa1079d60c40e9ab6643b25be1bab4089d0
Signed-off-by: Eunseok Choi <es10.choi@samsung.com>

[HACK][9610] drivers: acpm: set NULL to acpm_mfd_node

Change-Id: I5cd662400604e46fd2868972634d47f639cc48ec
Signed-off-by: yi jaeuk <ju.yi@samsung.com>

[9610] include: chip_id: add exynos9810 chip_id

Change-Id: I8206d813c467fb65f0bc90b53276ff5a74c49fb1
Signed-off-by: yi jaeuk <ju.yi@samsung.com>

[9610] arm64: configs: Enable ACPM

Change-Id: Ib2504642fe9ec1dbe6f544beb7e2b27a506dc4ad
Signed-off-by: yi jaeuk <ju.yi@samsung.com>

[COMMON] include: soc: modify exynos_ss for acpm

Change-Id: I6acd82ca5963b45e9bc349beb1455f0689616a86
Signed-off-by: Naeun Yoo <ne.yoo@samsung.com>

[9610] arm64: dtsi: add ACPM node

Change-Id: I85207444f120a04a9ceff37a39d866f60227d804
Signed-off-by: yi jaeuk <ju.yi@samsung.com>

[COMMON] drivers: soc: add acpm driver to Kconfig, Makefile

Change-Id: I94895563f73b763c5df84534d00396c7f11c0161
Signed-off-by: yi jaeuk <ju.yi@samsung.com>

[9610] drivers: soc: introduce ACPM driver

Change-Id: I74dca6a17cf3d2b1189371d9c9d8c5a52e9bd70b
Signed-off-by: yi jaeuk <ju.yi@samsung.com>

[9610] arm64: dtsi: Corrected clock node.

Change-Id: Ie71e26cd57ffd25f2d6fe4ac0d4bbcf7da02391d
Signed-off-by: Jang JeongHoon <jnghn.jang@samsung.com>

[9610] arm64: erd9610_defconfig: Enabled CONFIG_ECT.

Change-Id: I4f0115ed16c6d62e927a46444cca950dced3439d
Signed-off-by: Jang JeongHoon <jnghn.jang@samsung.com>

[9610] arm64: erd9610_defconfig: Enabled CAL_IF configs.

Change-Id: I92fcc6dfb7d7e87749935d658b7908709aedaafd
Signed-off-by: Jang JeongHoon <jnghn.jang@samsung.com>

[9610] arm64: dts: Added ECT node.

Change-Id: Idc3cdfe7da0df275466536ae73dd46dabfc81930
Signed-off-by: Jang JeongHoon <jnghn.jang@samsung.com>

[9610] arm64: dtsi: Added exynos_pmu node.

Change-Id: I17044200a14ad413e45bfdf48675b8c749125bb9
Signed-off-by: Jang JeongHoon <jnghn.jang@samsung.com>

soc: samsung: ect: modified the CLASS_ATTR macro in kernel4.14

Change-Id: Ia5edfef564b890b0ed777adf9d8a95fcf4fe1b7a
Signed-off-by: Lee Yongjin <yongjin0.lee@samsung.com>

[COMMON] soc: samsung: ect: fixed prevent defects

CID201507, CID201485, CID201471, CID201258, CID201144, CID200802

Change-Id: I7eea257c11b9b90abcb3d985721a309db42d2c01
Signed-off-by: Lee Yongjin <yongjin0.lee@samsung.com>

[COMMON] trace: ess: fixed the complie error by cmu and pmu

Change-Id: I0f7370a0b15d1d0bf36d17562d8f55dbb89e9f71
Signed-off-by: Lee Yongjin <yongjin0.lee@samsung.com>

[COMMON] soc: samsung: Added initial exynos_pmu codes.

Change-Id: I018b1403724225c5da3b9cd6c46824e452b23aa1
Signed-off-by: Jang JeongHoon <jnghn.jang@samsung.com>

[COMMON] soc: samsung: Added initial ect_parser codes.

Change-Id: Id10fb630aae22f9975ae3cd5f722d597c7b5dbf2
Signed-off-by: Jang JeongHoon <jnghn.jang@samsung.com>

[COMMON] clk: samsung: Added initial clock codes.

Change-Id: If68f3fea942f5eb86d7043208c58a216ccdaf96e
Signed-off-by: Jang JeongHoon <jnghn.jang@samsung.com>

[COMMON] soc: samsung: cal-if: Added initial CAL_IF codes.

Change-Id: Ibe84cbd4af5a2d7462db9ecffa2b85d6d0865441
Signed-off-by: Jang JeongHoon <jnghn.jang@samsung.com>

[HACK] disalbe chip-id driver function

Change-Id: I101b88152dd0c3ee0deb91abc4382e5b97d51953
Signed-off-by: Jaehyoung Choi <jkkkkk.choi@samsung.com>

[HACK] Fix uart driver code

Change-Id: I98f599b91ffd2a55a5b75e234a8d01fc938d24cc
Signed-off-by: Jaehyoung Choi <jkkkkk.choi@samsung.com>

[HACK] remove clock setting code

Change-Id: Ib34be34cd4a23277a8cb29dcf9592ec6abfded27
Signed-off-by: Jaehyoung Choi <jkkkkk.choi@samsung.com>

[COMMON] dt-binding: samsung: Add exynos9610 binding header

Change-Id: I4e929e5f320bd5280cc0d202046ac28373b77864
Signed-off-by: Jaehyoung Choi <jkkkkk.choi@samsung.com>

[9610] arm64: dtsi: Enable MP.

Change-Id: Ic7aa24f6606942432ec7da6ff34ce5daefa42465
Signed-off-by: lakkyung.jung <lakkyung.jung@samsung.com>

[9610] arm64: dts: Change name maestro-erd dts

Change-Id: Ice6f679ab908d646cd524418056a905c040ccb43
Signed-off-by: Jaehyoung Choi <jkkkkk.choi@samsung.com>

[9610] clk: samsung: Added exynos9610 clk driver.

Change-Id: I883a7fb07ad763dc593d15fa605786e06c7feea0
Signed-off-by: Jeonghoon Jang <jnghn.jang@samsung.com>

[9610][ERD] arm64: defconfig: create initial erd9610_defconfig

Change-Id: I9312ff832ae185d933f59b7387c8b15db048f0f4
Signed-off-by: Hyunki Koo <hyunki00.koo@samsung.com>

[9610] arm64: dtsi: create initial pinctrl dtsi of exynos9610

Change-Id: Id625b29839962c7cb1efab1da1dfbd3b19189814
Signed-off-by: Hyunki Koo <hyunki00.koo@samsung.com>

[9610][ERD] arm64: dts: create initial exynos9610 MAESTRO-ERD board dts

Change-Id: I5eaffd942d1b0208414c294cbec7a0e9b4c68faa
Signed-off-by: Jaehyoung Choi <jkkkkk.choi@samsung.com>

[9610] arm64: dtsi: create initial dtsi of exynos9610

Change-Id: I729265cf614990adb37c93a81bea28f085277341
Signed-off-by: Hyunki Koo <hyunki00.koo@samsung.com>

[9610] soc: samsung: Add EXYNOS9610 chip-id information

Change-Id: I39715d220ff9bcd9e62c1bb5667168eee08f8cc4
Signed-off-by: Jaehyoung Choi <jkkkkk.choi@samsung.com>

[9610] arm64: Add SOC_EXYNOS9610 in Kconfig.platforms.

Change-Id: I66eb552449e867d4788aa583da7faa7bbc97bc2f
Signed-off-by: Jaehyoung Choi <jkkkkk.choi@samsung.com>

[COMMON] pinctrl: samsung: support debug show

Each pin is possible to show its register value through DEBUG_FS.
This patch supports it like below:

  cat /sys/kernel/debug/pinctrl/10580000.pinctrl/pinconf-pins
  cat /sys/kernel/debug/pinctrl/10580000.pinctrl/pinconf-groups
  cat /sys/kernel/debug/pinctrl/10580000.pinctrl/pins

Change-Id: I99a05520946d7299ff692a1043b5b5390f33dd0f
Signed-off-by: eunki_kim <eunki_kim@samsung.com>

[COMMON] pinctrl: samsung: add pinctrl_force_sleep for sleep state configuration

Change-Id: I608701d120774998ff771d084a0da13b1675ec9d
Signed-off-by: Youngmin Nam <youngmin.nam@samsung.com>
Signed-off-by: Hyunki Koo <hyunki00.koo@samsung.com>

[COMMON] pinctrl: samsung: change FLTCON register setting routine.

The FLTCON register offset of each GPIO block is not regular.
To support irregular FLTCON offset of all GPIO block,
we should use fltcon_offset value in driver data to set FLTCON properly.

And we need to check whether both FLTCON0 and FLTCON1 should be set or not.
When nr_pins(The number of pins in the signle GPIO bank)
is greater than 4(The max number of pins in the single GPIO bank),
The FILTCON1 register also should be set.
When nr_pins is not greater than 4, we don't need to set FLTCON1.

Only alive block(gpa) has the filter selection bit.
So we need to set filter selction bit in case of alive block.
If some GPIO block is not alive, we should not set filter selection bit.

Change-Id: Icadc5f8df49fbf9b983918150e7016f96c40e57c
Signed-off-by: Youngmin Nam <youngmin.nam@samsung.com>
Signed-off-by: Hyunki Koo <hyunki00.koo@samsung.com>

[9610] pinctrl: samsung: add initial definition of pinctrl for exynos9610

Change-Id: Ie628d29ab948bac4a31aa343087115fb174cc87f
Signed-off-by: Jaehyoung Choi <jkkkkk.choi@samsung.com>

[COMMON] pinctrl: samsung : Add eint filter control register offset filed

To support eint filter control setting, we should describe
enit FLTCON register offset in EXYNOS9_PIN_BANK_EINT macro.
With fltcon_offset, we can set FLTCON regiseter of each GPIO block.

Change-Id: I5754fbfba1f7bd89c8218c5329af1c91081fac77
Signed-off-by: Hyunki Koo <hyunki00.koo@samsung.com>

[COMMON] clocksource: exynos_mct: add flags as IRQF_PERCPU

This flags prevents to migrate timer interrupt to other cpu.

Change-Id: Iabc2e3607b51cc879c2eb3ab02ed897d4ae8506f
Signed-off-by: Hosung Kim <hosung0.kim@samsung.com>

[COMMON] clocksource: exynos_mct: change H/W control sequence

This commit changes H/W control sequence of a majority in
exynos_mct codes. Because changed codes are mass-produced already
but mainline code is not so.

Change-Id: I168e289b06eddf4a53df66c8c11a4df52d11fd4d
Signed-off-by: Hosung Kim <hosung0.kim@samsung.com>

[COMMON] clocksource: exynos_mct: use only as clockevent

This commit set exynos_mct to use clockevent only.

Change-Id: Ie1a103f2a3b5b6283a868f542e1ab0337242d26f
Signed-off-by: Hosung Kim <hosung0.kim@samsung.com>

[COMMON] clocksource: arm_arch_timer: clocksource only flag for exynos

This commit adds the specific flag for using clocksource only in exynos.
It is so specific flag for exynos because exynos uses special power
feature for cpu on/off in the short time we called it c2 mode.

In exynos SoC, clocksource is used as arm_arch_timer and clockevent
is used as exynos_mct.

Change-Id: I411ea46d0f8997e3507adc7e60cb8996507e025b
Signed-off-by: Hosung Kim <hosung0.kim@samsung.com>

[COMMON] arm64: adds map.h to arch/arm64/include/asm

This commit adds map.h into "arch/arm64/include/asm".

Change-Id: I687d590065b9c4c93de62d2948b5aa5d01ed89fd
Signed-off-by: Yulgon Kim <yulgon.kim@samsung.com>

[COMMON] trace: ess: adds exynos-snapshot header for exynos soc

This commit adds exynos-snapshoti header into 'include/linux/".

Change-Id: I1588fdf2b306a34545878bf921fd1cd58f057b4e
Signed-off-by: Yulgon Kim <yulgon.kim@samsung.com>

[COMMON] arm64: Add exynos-smc.s and smc.h files

This patch adds 'exynos-smc.s' to 'arch/arm64/kernel' and 'smc.h'
to 'include/linux'.

Change-Id: Ib9d72f6bd840945e70c20e9478100a9770d8a284
Signed-off-by: Yulgon Kim <yulgon.kim@samsung.com>

[COMMON] soc: chipid: Add unique_id for adb

Change-Id: I144b1d2f806f949bb9a4f2a722296c3fbcbe6b99
Signed-off-by: Changki Kim <changki.kim@samsung.com>

[COMMON] soc: samsung: fix to declare platform driver for exynos-chipid

This commit fixes that exynos-chipid declared the platform driver
structure with __initdata section. The platform driver is used always
seaching by kernel platform driver framework.
If it is declared with __initdata, it's region is released by kernel
after booting.

Change-Id: I5776ff20d877a021c42f01d05d4cb2a1a6a24939
Signed-off-by: Hosung Kim <hosung0.kim@samsung.com>

[COMMON] soc: samsung: add exynos chipid driver support

Exynos SoCs have Chipid, for identification of product IDs
and SoC revisions. This patch intendes to provide initialization
code for all these functionalites.

This driver usese existing binding for exnos-chipid.

CC: Grant Likely <grant.likely@linaro.org>
CC: Rob Herring <robh+dt@kernel.org>
CC: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Pankaj Dubey <pankaj.dubey@samsung.com>
Signed-off-by: Hosung Kim <hosung0.kim@samsung.com>
Conflicts:

drivers/soc/Kconfig
drivers/soc/Makefile
drivers/soc/samsung/Kconfig
drivers/soc/samsung/Makefile

Change-Id: I1271233bcbbc2509e0a0fe69b24de8b3a0044418

Merge 4.14.32 into android-4.14

Changes in 4.14.32
tcp: reset sk_send_head in tcp_write_queue_purge
tcp: purge write queue upon aborting the connection
qed: Fix non TCP packets should be dropped on iWARP ll2 connection
sysfs: symlink: export sysfs_create_link_nowarn()
net: phy: relax error checking when creating sysfs link netdev->phydev
devlink: Remove redundant free on error path
macvlan: filter out unsupported feature flags
net: ipv6: keep sk status consistent after datagram connect failure
ipv6: old_dport should be a __be16 in __ip6_datagram_connect()
ipv6: sr: fix NULL pointer dereference when setting encap source address
ipv6: sr: fix scheduling in RCU when creating seg6 lwtunnel state
mlxsw: spectrum_buffers: Set a minimum quota for CPU port traffic
net: phy: Tell caller result of phy_change()
net sched actions: return explicit error when tunnel_key mode is not specified
ppp: avoid loop in xmit recursion detection code
rhashtable: Fix rhlist duplicates insertion
kcm: lock lower socket in kcm_attach
sch_netem: fix skb leak in netem_enqueue()
ieee802154: 6lowpan: fix possible NULL deref in lowpan_device_event()
net: use skb_to_full_sk() in skb_update_prio()
net: Fix hlist corruptions in inet_evict_bucket()
dccp: check sk for closed state in dccp_sendmsg()
ipv6: fix access to non-linear packet in ndisc_fill_redirect_hdr_option()
l2tp: do not accept arbitrary sockets
net: ethernet: arc: Fix a potential memory leak if an optional regulator is deferred
net: ethernet: ti: cpsw: add check for in-band mode setting with RGMII PHY interface
net: fec: Fix unbalanced PM runtime calls
net/iucv: Free memory obtained by kzalloc
netlink: avoid a double skb free in genlmsg_mcast()
net: Only honor ifindex in IP_PKTINFO if non-0
net: systemport: Rewrite __bcm_sysport_tx_reclaim()
qede: Fix qedr link update
skbuff: Fix not waking applications when errors are enqueued
team: Fix double free in error path
soc/fsl/qbman: fix issue in qman_delete_cgr_safe()
dpaa_eth: fix error in dpaa_remove()
dpaa_eth: remove duplicate initialization
dpaa_eth: increment the RX dropped counter when needed
dpaa_eth: remove duplicate increment of the tx_errors counter
s390/qeth: free netdevice when removing a card
s390/qeth: when thread completes, wake up all waiters
s390/qeth: lock read device while queueing next buffer
s390/qeth: on channel error, reject further cmd requests
Linux 4.14.32

Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Linux 4.14.32

s390/qeth: on channel error, reject further cmd requests

[ Upstream commit a6c3d93963e4b333c764fde69802c3ea9eaa9d5c ]

When the IRQ handler determines that one of the cmd IO channels has
failed and schedules recovery, block any further cmd requests from
being submitted. The request would inevitably stall, and prevent the
recovery from making progress until the request times out.

This sort of error was observed after Live Guest Relocation, where
the pending IO on the READ channel intentionally gets terminated to
kick-start recovery. Simultaneously the guest executed SIOCETHTOOL,
triggering qeth to issue a QUERY CARD INFO command. The command
then stalled in the inoperabel WRITE channel.

Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

s390/qeth: lock read device while queueing next buffer

[ Upstream commit 17bf8c9b3d499d5168537c98b61eb7a1fcbca6c2 ]

For calling ccw_device_start(), issue_next_read() needs to hold the
device's ccwlock.
This is satisfied for the IRQ handler path (where qeth_irq() gets called
under the ccwlock), but we need explicit locking for the initial call by
the MPC initialization.

Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

s390/qeth: when thread completes, wake up all waiters

[ Upstream commit 1063e432bb45be209427ed3f1ca3908e4aa3c7d7 ]

qeth_wait_for_threads() is potentially called by multiple users, make
sure to notify all of them after qeth_clear_thread_running_bit()
adjusted the thread_running_mask. With no timeout, callers would
otherwise stall.

Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

s390/qeth: free netdevice when removing a card

[ Upstream commit 6be687395b3124f002a653c1a50b3260222b3cd7 ]

On removal, a qeth card's netdevice is currently not properly freed
because the call chain looks as follows:

qeth_core_remove_device(card)
lx_remove_device(card)
unregister_netdev(card->dev)
card->dev = NULL !!!
qeth_core_free_card(card)
if (card->dev) !!!
free_netdev(card->dev)

Fix it by free'ing the netdev straight after unregistering. This also
fixes the sysfs-driven layer switch case (qeth_dev_layer2_store()),
where the need to free the current netdevice was not considered at all.

Note that free_netdev() takes care of the netif_napi_del() for us too.

Fixes: 4a71df50047f ("qeth: new qeth device driver")
Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com>
Reviewed-by: Ursula Braun <ubraun@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dpaa_eth: remove duplicate increment of the tx_errors counter

[ Upstream commit 82d141cd19d088ee41feafde4a6f86eeb40d93c5 ]

The tx_errors counter is incremented by the dpaa_xmit caller.

Signed-off-by: Camelia Groza <camelia.groza@nxp.com>
Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dpaa_eth: increment the RX dropped counter when needed

[ Upstream commit e4d1b37c17d000a3da9368a3e260fb9ea4927c25 ]

Signed-off-by: Camelia Groza <camelia.groza@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dpaa_eth: remove duplicate initialization

[ Upstream commit 565186362b73226a288830abe595f05f0cec0bbc ]

The fd_format has already been initialized at this point.

Signed-off-by: Camelia Groza <camelia.groza@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dpaa_eth: fix error in dpaa_remove()

[ Upstream commit 88075256ee817041d68c2387f29065b5cb2b342a ]

The recent changes that make the driver probing compatible with DSA
were not propagated in the dpa_remove() function, breaking the
module unload function. Using the proper device to address the issue.

Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

soc/fsl/qbman: fix issue in qman_delete_cgr_safe()

[ Upstream commit 96f413f47677366e0ae03797409bfcc4151dbf9e ]

The wait_for_completion() call in qman_delete_cgr_safe()
was triggering a scheduling while atomic bug, replacing the
kthread with a smp_call_function_single() call to fix it.

Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>
Signed-off-by: Roy Pledge <roy.pledge@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

team: Fix double free in error path

[ Upstream commit cbcc607e18422555db569b593608aec26111cb0b ]

The __send_and_alloc_skb() receives a skb ptr as a parameter but in
case it fails the skb is not valid:
- Send failed and released the skb internally.
- Allocation failed.

The current code tries to release the skb in case of failure which
causes redundant freeing.

Fixes: 9b00cf2d1024 ("team: implement multipart netlink messages for options transfers")
Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

skbuff: Fix not waking applications when errors are enqueued

[ Upstream commit 6e5d58fdc9bedd0255a8781b258f10bbdc63e975 ]

When errors are enqueued to the error queue via sock_queue_err_skb()
function, it is possible that the waiting application is not notified.

Calling 'sk->sk_data_ready()' would not notify applications that
selected only POLLERR events in poll() (for example).

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: Randy E. Witt <randy.e.witt@intel.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

qede: Fix qedr link update

[ Upstream commit 4609adc27175839408359822523de7247d56c87f ]

Link updates were not reported to qedr correctly.
Leading to cases where a link could be down, but qedr
would see it as up.
In addition, once qede was loaded, link state would be up,
regardless of the actual link state.

Signed-off-by: Michal Kalderon <michal.kalderon@cavium.com>
Signed-off-by: Ariel Elior <ariel.elior@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>