GitHub/LineageOS/android_kernel_motorola_exynos9610.git
12 years agoMerge tag 'gadget-for-v3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi...
Greg Kroah-Hartman [Mon, 7 May 2012 16:49:32 +0000 (09:49 -0700)]
Merge tag 'gadget-for-v3.5' of git://git./linux/kernel/git/balbi/usb into usb-next

usb: gadget: patches for v3.5

This pull request is quite big, but mainly because there's a
giant rework of the s3c_hsotg.c driver to make it friendlier
for other users. Samsung Exynos platforms use the DesignWare
Core USB2 IP from Synopsys so it's a bit unfair to have the
driver work for Samsung platforms only. In short, the big
rework is in preparation to make the driver more reusable.

Another big rework in this pull request came from Ido, where
he's removing the redundant pointer for the endpoint descriptor
from the controller driver's own endpoint representation. The
same pointer is available through the generic struct usb_ep
structure.

Also on this pull request is the conversion of a few extra
controller drivers to the new style registration, which allows
multiple controllers to be available on the same platform and
helps remove global pointers from those drivers.

Together with those big changes, there's the usual fixes and cleanups
to gadget drivers. Nothing major.

12 years agoMerge 3.4-rc6 into usb-next
Greg Kroah-Hartman [Mon, 7 May 2012 16:03:39 +0000 (09:03 -0700)]
Merge 3.4-rc6 into usb-next

This resolves the conflict with:
drivers/usb/host/ehci-tegra.c

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agoLinux 3.4-rc6
Linus Torvalds [Sun, 6 May 2012 22:07:32 +0000 (15:07 -0700)]
Linux 3.4-rc6

12 years agoMerge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Sun, 6 May 2012 19:19:38 +0000 (12:19 -0700)]
Merge branch 'x86-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull x86 fixes form Peter Anvin

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  intel_mid_powerbtn: mark irq as IRQF_NO_SUSPEND
  arch/x86/platform/geode/net5501.c: change active_low to 0 for LED driver
  x86, relocs: Remove an unused variable
  asm-generic: Use __BITS_PER_LONG in statfs.h
  x86/amd: Re-enable CPU topology extensions in case BIOS has disabled it

12 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux...
Linus Torvalds [Sun, 6 May 2012 17:20:07 +0000 (10:20 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/mason/linux-btrfs

Pull btrfs fixes from Chris Mason:
 "The big ones here are a memory leak we introduced in rc1, and a
  scheduling while atomic if the transid on disk doesn't match the
  transid we expected.  This happens for corrupt blocks, or out of date
  disks.

  It also fixes up the ioctl definition for our ioctl to resolve logical
  inode numbers.  The __u32 was a merging error and doesn't match what
  we ship in the progs."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
  Btrfs: avoid sleeping in verify_parent_transid while atomic
  Btrfs: fix crash in scrub repair code when device is missing
  btrfs: Fix mismatching struct members in ioctl.h
  Btrfs: fix page leak when allocing extent buffers
  Btrfs: Add properly locking around add_root_to_dirty_list

12 years agox86: fix broken TASK_SIZE for ia32_aout
Al Viro [Sun, 6 May 2012 16:20:00 +0000 (17:20 +0100)]
x86: fix broken TASK_SIZE for ia32_aout

Setting TIF_IA32 in load_aout_binary() used to be enough; these days
TASK_SIZE is controlled by TIF_ADDR32 and that one doesn't get set
there.  Switch to use of set_personality_ia32()...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
12 years agoBtrfs: avoid sleeping in verify_parent_transid while atomic
Chris Mason [Sun, 6 May 2012 11:23:47 +0000 (07:23 -0400)]
Btrfs: avoid sleeping in verify_parent_transid while atomic

verify_parent_transid needs to lock the extent range to make
sure no IO is underway, and so it can safely clear the
uptodate bits if our checks fail.

But, a few callers are using it with spinlocks held.  Most
of the time, the generation numbers are going to match, and
we don't want to switch to a blocking lock just for the error
case.  This adds an atomic flag to verify_parent_transid,
and changes it to return EAGAIN if it needs to block to
properly verifiy things.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
12 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mattst88...
Linus Torvalds [Sat, 5 May 2012 23:34:38 +0000 (16:34 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/mattst88/alpha

Pull alpha fixes from Matt Turner:
 "My alpha tree is back up (after taking quite some time to get my GPG
  key signed).  It contains just some simple fixes."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mattst88/alpha:
  alpha: silence 'const' warning in sys_marvel.c
  alpha: include module.h to fix modpost on Tsunami
  alpha: properly define get/set_rtc_time on Marvel/SMP
  alpha: VGA_HOSE depends on VGA_CONSOLE

12 years agoTTY: pdc_cons, fix regression in close
Jiri Slaby [Sat, 5 May 2012 20:49:10 +0000 (22:49 +0200)]
TTY: pdc_cons, fix regression in close

The test in pdc_console_tty_close '!tty->count' was always wrong
because tty->count is decremented after tty->ops->close is called and
thus can never be zero. Hence the 'then' branch was never executed and
the timer never deleted.

This did not matter until commit 5dd5bc40f3b6 ("TTY: pdc_cons, use
tty_port").  There we needed to set TTY in tty_port to NULL, but this
never happened due to the bug above.

So change the test to really trigger at the last close by changing the
condition to 'tty->count == 1'.

Well, the driver should not touch tty->count at all.  It should use
tty_port->count and count open count there itself.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Reported-and-tested-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Cc: Helge Deller <deller@gmx.de>
Cc: "James E.J. Bottomley" <jejb@parisc-linux.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
12 years agoMerge tag 'sound-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Linus Torvalds [Sat, 5 May 2012 17:07:06 +0000 (10:07 -0700)]
Merge tag 'sound-3.4' of git://git./linux/kernel/git/tiwai/sound

Pull sound sound fixes from Takashi Iwai:
 "As good as nothing exciting here; just a few trivial fixes for various
  ASoC stuff."

* tag 'sound-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ASoC: omap-pcm: Free dma buffers in case of error.
  ASoC: s3c2412-i2s: Fix dai registration
  ASoC: wm8350: Don't use locally allocated codec struct
  ASoC: tlv312aic23: unbreak resume
  ASoC: bf5xx-ssm2602: Set DAI format
  ASoC: core: check of_property_count_strings failure
  ASoC: dt: sgtl5000.txt: Add description for 'reg' field
  ASoC: wm_hubs: Make sure we don't disable differential line outputs

12 years agoMerge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux
Linus Torvalds [Sat, 5 May 2012 17:06:06 +0000 (10:06 -0700)]
Merge branch 'release' of git://git./linux/kernel/git/lenb/linux

Pull an ACPI patch from Len Brown:
 "It fixes a D3 issue new in 3.4-rc1."

By Lin Ming via Len Brown:
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux:
  ACPI: Fix D3hot v D3cold confusion

12 years agoinit: don't try mounting device as nfs root unless type fully matches
Sasha Levin [Sat, 5 May 2012 15:06:35 +0000 (17:06 +0200)]
init: don't try mounting device as nfs root unless type fully matches

Currently, we'll try mounting any device who's major device number is
UNNAMED_MAJOR as NFS root.  This would happen for non-NFS devices as
well (such as 9p devices) but it wouldn't cause any issues since
mounting the device as NFS would fail quickly and the code proceeded to
doing the proper mount:

       [  101.522716] VFS: Unable to mount root fs via NFS, trying floppy.
       [  101.534499] VFS: Mounted root (9p filesystem) on device 0:18.

Commit 6829a048102a ("NFS: Retry mounting NFSROOT") introduced retries
when mounting NFS root, which means that now we don't immediately fail
and instead it takes an additional 90+ seconds until we stop retrying,
which has revealed the issue this patch fixes.

This meant that it would take an additional 90 seconds to boot when
we're not using a device type which gets detected in order before NFS.

This patch modifies the NFS type check to require device type to be
'Root_NFS' instead of requiring the device to have an UNNAMED_MAJOR
major.  This makes boot process cleaner since we now won't go through
the NFS mounting code at all when the device isn't an NFS root
("/dev/nfs").

Signed-off-by: Sasha Levin <levinsasha928@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
12 years agoMerge branch 'fix/asoc' into for-linus
Takashi Iwai [Sat, 5 May 2012 09:27:26 +0000 (11:27 +0200)]
Merge branch 'fix/asoc' into for-linus

12 years agoMerge branch 'for-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/lrg/asoc...
Takashi Iwai [Sat, 5 May 2012 09:26:50 +0000 (11:26 +0200)]
Merge branch 'for-3.4' of git://git./linux/kernel/git/lrg/asoc into fix/asoc

12 years agoMerge tag 'asoc-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound...
Takashi Iwai [Sat, 5 May 2012 09:25:17 +0000 (11:25 +0200)]
Merge tag 'asoc-3.4' of git://git./linux/kernel/git/broonie/sound into for-linus

ASoC: Updates for 3.4

Nothing terribly exciting here, a bunch of small and simple fixes
scattered around the place.

12 years agoACPI: Fix D3hot v D3cold confusion
Lin Ming [Mon, 23 Apr 2012 01:03:49 +0000 (09:03 +0800)]
ACPI: Fix D3hot v D3cold confusion

Before this patch, ACPI_STATE_D3 incorrectly referenced D3hot
in some places, but D3cold in other places.

After this patch, ACPI_STATE_D3 always means ACPI_STATE_D3_COLD;
and all references to D3hot use ACPI_STATE_D3_HOT.

ACPI's _PR3 method is used to enter both D3hot and D3cold states.
What distinguishes D3hot from D3cold is the presence _PR3
(Power Resources for D3hot)  If these resources are all ON,
then the state is D3hot.  If _PR3 is not present,
or all _PR0 resources for the devices are OFF,
then the state is D3cold.

This patch applies after Linux-3.4-rc1.
A future syntax cleanup may remove ACPI_STATE_D3
to emphasize that it always means ACPI_STATE_D3_COLD.

Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Acked-by: Rafael J. Wysocki <rjw@sisk.pl>
Reviewed-by: Aaron Lu <aaron.lu@amd.com>
Signed-off-by: Len Brown <len.brown@intel.com>
12 years agohfsplus: Fix potential buffer overflows
Greg Kroah-Hartman [Fri, 4 May 2012 19:09:39 +0000 (12:09 -0700)]
hfsplus: Fix potential buffer overflows

Commit ec81aecb2966 ("hfs: fix a potential buffer overflow") fixed a few
potential buffer overflows in the hfs filesystem.  But as Timo Warns
pointed out, these changes also need to be made on the hfsplus
filesystem as well.

Reported-by: Timo Warns <warns@pre-sense.de>
Acked-by: WANG Cong <amwang@redhat.com>
Cc: Alexey Khoroshilov <khoroshilov@ispras.ru>
Cc: Miklos Szeredi <mszeredi@suse.cz>
Cc: Sage Weil <sage@newdream.net>
Cc: Eugene Teo <eteo@redhat.com>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Dave Anderson <anderson@redhat.com>
Cc: stable <stable@vger.kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
12 years agoUSB: EHCI: OMAP: Finish ehci omap phy reset cycle before adding hcd.
Russ Dill [Fri, 4 May 2012 11:24:47 +0000 (04:24 -0700)]
USB: EHCI: OMAP: Finish ehci omap phy reset cycle before adding hcd.

'ARM: OMAP3: USB: Fix the EHCI ULPI PHY reset issue' (1fcb57d0f) created a regression
with Beagleboard xM if booting the kernel after running 'usb start' under u-boot.

Finishing the reset before calling 'usb_add_hcd' fixes the regression. This is most likely due to
usb_add_hcd calling the driver's reset and init functions which expect the hardware to be
up and running.

Signed-off-by: Russ Dill <Russ.Dill@ti.com>
Acked-by: Felipe Balbi <balbi@ti.com>
Cc: stable <stable@vger.kernel.org> [3.4]
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agoUSB: serqt_usb2.c: remove dbg() tracing calls
Greg Kroah-Hartman [Fri, 4 May 2012 23:17:51 +0000 (16:17 -0700)]
USB: serqt_usb2.c: remove dbg() tracing calls

dbg() was used a lot a long time ago to trace code flow.  Now that we have
ftrace, this isn't needed at all, so remove these calls.

CC: Bill Pemberton <wfp5p@virginia.edu>
CC: Rusty Russell <rusty@rustcorp.com.au>
CC: Alan Stern <stern@rowland.harvard.edu>
CC: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agoUSB: quatech_usb2.c: remove dbg() tracing calls
Greg Kroah-Hartman [Fri, 4 May 2012 23:17:49 +0000 (16:17 -0700)]
USB: quatech_usb2.c: remove dbg() tracing calls

dbg() was used a lot a long time ago to trace code flow.  Now that we have
ftrace, this isn't needed at all, so remove these calls.

CC: Rusty Russell <rusty@rustcorp.com.au>
CC: Alan Stern <stern@rowland.harvard.edu>
CC: Mauro Carvalho Chehab <mchehab@redhat.com>
CC: Kautuk Consul <consul.kautuk@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agoUSB: gadget: ci13xx_udc: remove unused err() macro
Greg Kroah-Hartman [Fri, 4 May 2012 22:39:11 +0000 (15:39 -0700)]
USB: gadget: ci13xx_udc: remove unused err() macro

I previously cleaned up the err() call usage in this driver, but it
really was calling this macro instead.  To remove future confusion, just
delete this unused macro now.

Ideally, the warn() and info() macros should also be removed, and the
"real" dev_warn() and dev_info() calls should be used instead.

Reported-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agoUSB: input: appletouch: fix up compiler warning
Greg Kroah-Hartman [Fri, 4 May 2012 22:35:56 +0000 (15:35 -0700)]
USB: input: appletouch: fix up compiler warning

My last patch fixing up the dev_* messages caused a compiler warning
accidentally for an unused variable.  Fix this up, as it was my fault.

Cc: Alessandro Rubini <rubini@ipvvis.unipv.it>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agoMerge branch 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Fri, 4 May 2012 22:35:09 +0000 (15:35 -0700)]
Merge branch 'timers-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull timer fix from Thomas Gleixner.

* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  rtc: Fix possible null pointer dereference in rtc-mpc5121.c

12 years agoMerge git://git.samba.org/sfrench/cifs-2.6
Linus Torvalds [Fri, 4 May 2012 22:34:21 +0000 (15:34 -0700)]
Merge git://git.samba.org/sfrench/cifs-2.6

Pull CIFS fixes from Steve French.

* git://git.samba.org/sfrench/cifs-2.6:
  fs/cifs: fix parsing of dfs referrals
  cifs: make sure we ignore the credentials= and cred= options
  [CIFS] Update cifs version to 1.78
  cifs - check S_AUTOMOUNT in revalidate
  cifs: add missing initialization of server->req_lock
  cifs: don't cap ra_pages at the same level as default_backing_dev_info
  CIFS: Fix indentation in cifs_show_options

12 years agoCPU frequency drivers MAINTAINERS update
Dave Jones [Fri, 4 May 2012 16:04:17 +0000 (12:04 -0400)]
CPU frequency drivers MAINTAINERS update

Remove myself as cpufreq maintainer.
x86 driver changes can go through the regular x86/ACPI trees.
ARM driver changes through the ARM trees.
cpufreq core changes are rare these days, and can just go to lkml/direct.

Signed-off-by: Dave Jones <davej@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
12 years agoUSB: input: usbtouchscreen.c: fix up dev_* messages
Greg Kroah-Hartman [Fri, 4 May 2012 22:33:16 +0000 (15:33 -0700)]
USB: input: usbtouchscreen.c: fix up dev_* messages

Previously I had made the struct device point to the input device, but
after talking with Dmitry, he said that the USB device would make more
sense for this driver to point to.  So converted it to use that instead.

CC: Dmitry Torokhov <dmitry.torokhov@gmail.com>
CC: Henrik Rydberg <rydberg@euromail.se>
CC: Rusty Russell <rusty@rustcorp.com.au>
CC: Viresh Kumar <viresh.kumar@st.com>
CC: Armando Visconti <armando.visconti@st.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agoUSB: input: wacom_sys.c: fix up dev_* messages
Greg Kroah-Hartman [Fri, 4 May 2012 22:33:13 +0000 (15:33 -0700)]
USB: input: wacom_sys.c: fix up dev_* messages

Previously I had made the struct device point to the input device, but
after talking with Dmitry, he said that the USB device would make more
sense for this driver to point to.  So converted it to use that instead.

CC: Dmitry Torokhov <dmitry.torokhov@gmail.com>
CC: Ping Cheng <pingc@wacom.com>
CC: Chris Bagwell <chris@cnpbagwell.com>
CC: Eduard Hasenleithner <eduard@hasenleithner.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agoUSB: input: kbtab.c: fix up dev_* messages
Greg Kroah-Hartman [Fri, 4 May 2012 22:33:11 +0000 (15:33 -0700)]
USB: input: kbtab.c: fix up dev_* messages

Previously I had made the struct device point to the input device, but
after talking with Dmitry, he said that the USB device would make more
sense for this driver to point to.  So converted it to use that instead.

CC: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agoUSB: input: gtco.c: fix up dev_* messages
Greg Kroah-Hartman [Fri, 4 May 2012 22:33:09 +0000 (15:33 -0700)]
USB: input: gtco.c: fix up dev_* messages

Previously I had made the struct device point to the input device, but
after talking with Dmitry, he said that the USB device would make more
sense for this driver to point to.  So converted it to use that instead.

CC: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agoUSB: input: aiptek.c: fix up dev_* messages
Greg Kroah-Hartman [Fri, 4 May 2012 22:33:06 +0000 (15:33 -0700)]
USB: input: aiptek.c: fix up dev_* messages

Previously I had made the struct device point to the input device, but
after talking with Dmitry, he said that the USB device would make more
sense for this driver to point to.  So converted it to use that instead.

CC: Dmitry Torokhov <dmitry.torokhov@gmail.com>
CC: Jesper Juhl <jj@chaosbits.net>
CC: JJ Ding <dgdunix@gmail.com>
CC: Edwin van Vliet <edwin@cheatah.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agoUSB: input: acecad.c: fix up dev_* messages
Greg Kroah-Hartman [Fri, 4 May 2012 22:33:04 +0000 (15:33 -0700)]
USB: input: acecad.c: fix up dev_* messages

Previously I had made the struct device point to the input device, but
after talking with Dmitry, he said that the USB device would make more
sense for this driver to point to.  So converted it to use that instead.

CC: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agoUSB: input: bcm5974.c: fix up dev_* messages
Greg Kroah-Hartman [Fri, 4 May 2012 22:33:02 +0000 (15:33 -0700)]
USB: input: bcm5974.c: fix up dev_* messages

Previously I had made the struct device point to the input device, but
after talking with Dmitry, he said that the USB device would make more
sense for this driver to point to.  So converted it to use that instead.

CC: Henrik Rydberg <rydberg@euromail.se>
CC: Alessandro Rubini <rubini@ipvvis.unipv.it>
CC: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agoUSB: input: appletouch.c: fix up dev_* messages
Greg Kroah-Hartman [Fri, 4 May 2012 22:33:01 +0000 (15:33 -0700)]
USB: input: appletouch.c: fix up dev_* messages

Previously I had made the struct device point to the input device, but
after talking with Dmitry, he said that the USB device would make more
sense for this driver to point to.  So converted it to use that instead.

CC: Alessandro Rubini <rubini@ipvvis.unipv.it>
CC: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agoUSB: input: yealink.c: fix up dev_* messages
Greg Kroah-Hartman [Fri, 4 May 2012 22:33:01 +0000 (15:33 -0700)]
USB: input: yealink.c: fix up dev_* messages

Previously I had made the struct device point to the input device, but
after talking with Dmitry, he said that the USB device would make more
sense for this driver to point to.  So converted it to use that instead.

CC: Henk Vergonet <Henk.Vergonet@gmail.com>
CC: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agoUSB: input: powermate.c: fix up dev_* messages
Greg Kroah-Hartman [Fri, 4 May 2012 22:33:00 +0000 (15:33 -0700)]
USB: input: powermate.c: fix up dev_* messages

Previously I had made the struct device point to the input device, but
after talking with Dmitry, he said that the USB device would make more
sense for this driver to point to.  So converted it to use that instead.

CC: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agoUSB: input: keyspan_remote.c: fix up dev_* messages
Greg Kroah-Hartman [Fri, 4 May 2012 22:32:58 +0000 (15:32 -0700)]
USB: input: keyspan_remote.c: fix up dev_* messages

Previously I had made the struct device point to the input device, but
after talking with Dmitry, he said that the USB device would make more
sense for this driver to point to.  So converted it to use that instead.

CC: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agoUSB: input: cm109.c: fix up dev_* messages
Greg Kroah-Hartman [Fri, 4 May 2012 22:32:55 +0000 (15:32 -0700)]
USB: input: cm109.c: fix up dev_* messages

Previously I had made the struct device point to the input device, but
after talking with Dmitry, he said that the USB device would make more
sense for this driver to point to.  So converted it to use that instead.

CC: Dmitry Torokhov <dmitry.torokhov@gmail.com>
CC: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agoUSB: input: xpad.c: fix up dev_* messages
Greg Kroah-Hartman [Fri, 4 May 2012 22:32:53 +0000 (15:32 -0700)]
USB: input: xpad.c: fix up dev_* messages

Previously I had made the struct device point to the input device, but
after talking with Dmitry, he said that the USB device would make more
sense for this driver to point to.  So converted it to use that instead.

CC: Dmitry Torokhov <dmitry.torokhov@gmail.com>
CC: "Magnus Hörlin" <magnus@alefors.se>
CC: Rusty Russell <rusty@rustcorp.com.au>
CC: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agoUSB: input: iforce: fix up dev_* messages
Greg Kroah-Hartman [Fri, 4 May 2012 22:23:04 +0000 (15:23 -0700)]
USB: input: iforce: fix up dev_* messages

Previously I had made the struct device point to the input device, but
after talking with Dmitry, he said that the USB device would make more
sense for this driver to point to.  So converted it to use that instead.

Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agoseqlock: add 'raw_seqcount_begin()' function
Linus Torvalds [Fri, 4 May 2012 22:13:54 +0000 (15:13 -0700)]
seqlock: add 'raw_seqcount_begin()' function

The normal read_seqcount_begin() function will wait for any current
writers to exit their critical region by looping until the sequence
count is even.

That "wait for sequence count to stabilize" is the right thing to do if
the read-locker will just retry the whole operation on contention: no
point in doing a potentially expensive reader sequence if we know at the
beginning that we'll just end up re-doing it all.

HOWEVER.  Some users don't actually retry the operation, but instead
will abort and do the operation with proper locking.  So the sequence
count case may be the optimistic quick case, but in the presense of
writers you may want to do full locking in order to guarantee forward
progress.  The prime example of this would be the RCU name lookup.

And in that case, you may well be better off without the "retry early",
and are in a rush to instead get to the failure handling.  Thus this
"raw" interface that just returns the sequence number without testing it
- it just forces the low bit to zero so that read_seqcount_retry() will
always fail such a "active concurrent writer" scenario.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
12 years agoFix __read_seqcount_begin() to use ACCESS_ONCE for sequence value read
Linus Torvalds [Fri, 4 May 2012 21:46:02 +0000 (14:46 -0700)]
Fix __read_seqcount_begin() to use ACCESS_ONCE for sequence value read

We really need to use a ACCESS_ONCE() on the sequence value read in
__read_seqcount_begin(), because otherwise the compiler might end up
reloading the value in between the test and the return of it.  As a
result, it might end up returning an odd value (which means that a write
is in progress).

If the reader is then fast enough that that odd value is still the
current one when the read_seqcount_retry() is done, we might end up with
a "successful" read sequence, even despite the concurrent write being
active.

In practice this probably never really happens - there just isn't
anything else going on around the read of the sequence count, and the
common case is that we end up having a read barrier immediately
afterwards.

So the code sequence in which gcc might decide to reaload from memory is
small, and there's no reason to believe it would ever actually do the
reload.  But if the compiler ever were to decide to do so, it would be
incredibly annoying to debug.  Let's just make sure.

Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
12 years agointel_mid_powerbtn: mark irq as IRQF_NO_SUSPEND
Yong Wang [Fri, 4 May 2012 21:02:44 +0000 (14:02 -0700)]
intel_mid_powerbtn: mark irq as IRQF_NO_SUSPEND

So that the power button still wakes up the platform.

Signed-off-by: Pierre Tardy <pierre.tardy@intel.com>
Link: http://lkml.kernel.org/r/20120504210244.F2EA5A018B@akpm.mtv.corp.google.com
Tested-by: Kangkai Yin <kangkai.yin@intel.com>
Tested-by: Yong Wang <yong.y.wang@intel.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Cc: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
12 years agoarch/x86/platform/geode/net5501.c: change active_low to 0 for LED driver
Bjarke Istrup Pedersen [Fri, 4 May 2012 21:01:45 +0000 (14:01 -0700)]
arch/x86/platform/geode/net5501.c: change active_low to 0 for LED driver

It seems that there was an error with the active_low = 1 for the
LED, since it should be set to 0 (meaning that active is high,
since 0 is false, hence the confusion.

The wiki article about it confuses it, since it contradicts itself,
regarding what turns on the LED.

I have tested 3.4-rc2 on my net5501 with this patch, and it makes the LED
behave correctly, where "none" turns it off, and "default-on" turns it on,
when echoed onto the trigger "file" in /sys/class/leds.

Signed-off-by: Bjarke Istrup Pedersen <gurligebis@gentoo.org>
Link: http://lkml.kernel.org/r/20120504210146.62186A018B@akpm.mtv.corp.google.com
Cc: Philip Prindeville <philipp@redfish-solutions.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
12 years agoBtrfs: fix crash in scrub repair code when device is missing
Stefan Behrens [Fri, 4 May 2012 19:16:07 +0000 (15:16 -0400)]
Btrfs: fix crash in scrub repair code when device is missing

Fix that when scrub tries to repair an I/O or checksum error and one of
the devices containing the mirror is missing, it crashes in bio_add_page
because the bdev is a NULL pointer for missing devices.

Reported-by: Marco L. Crociani <marco.crociani@gmail.com>
Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
12 years agobtrfs: Fix mismatching struct members in ioctl.h
Alexander Block [Fri, 4 May 2012 19:16:06 +0000 (15:16 -0400)]
btrfs: Fix mismatching struct members in ioctl.h

Fix the size members of btrfs_ioctl_ino_path_args and
btrfs_ioctl_logical_ino_args. The user space btrfs-progs utilities used
__u64 and the kernel headers used __u32 before.

Signed-off-by: Alexander Block <ablock84@googlemail.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
12 years agoBtrfs: fix page leak when allocing extent buffers
Josef Bacik [Fri, 4 May 2012 19:16:06 +0000 (15:16 -0400)]
Btrfs: fix page leak when allocing extent buffers

If we happen to alloc a extent buffer and then alloc a page and notice that
page is already attached to an extent buffer, we will only unlock it and
free our existing eb.  Any pages currently attached to that eb will be
properly freed, but we don't do the page_cache_release() on the page where
we noticed the other extent buffer which can cause us to leak pages and I
hope cause the weird issues we've been seeing in this area.  Thanks,

Signed-off-by: Josef Bacik <josef@redhat.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
12 years agoBtrfs: Add properly locking around add_root_to_dirty_list
Chris Mason [Thu, 3 May 2012 16:08:48 +0000 (12:08 -0400)]
Btrfs: Add properly locking around add_root_to_dirty_list

add_root_to_dirty_list happens once at the very beginning of the
transaction, but it is still racey.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
12 years agoMerge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux
Linus Torvalds [Fri, 4 May 2012 14:57:13 +0000 (07:57 -0700)]
Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux

Pull drm fixes from Dave Airlie:
 "Some minor fixes from Intel and a radeon fix.

  I have the nouveau fix for the i2c regression queued for next week,
  its mostly a revert and seems to work on the system it was originally
  introduced for thanks to some i2c core changes."

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
  drm/radeon: clarify and extend wb setup on APUs and NI+ asics
  drm/i915: enable dip before writing data on gen4
  fixing dmi match for hp t5745 and hp st5747 thin client
  drm/i915: Only enable IPS polling for gen5
  drm/i915: Do not read non-existent DPLL registers on PCH hardware

12 years agoMerge tag 'md-3.4-fixes' of git://neil.brown.name/md
Linus Torvalds [Fri, 4 May 2012 14:56:22 +0000 (07:56 -0700)]
Merge tag 'md-3.4-fixes' of git://neil.brown.name/md

Pull one small fix for md/bitmaps from NeilBrown:
 "This fixes a regression that was introduced in the merge window."

* tag 'md-3.4-fixes' of git://neil.brown.name/md:
  md/bitmap: fix calculation of 'chunks' - missing shift.

12 years agoMerge branch 'fix-unmapped-word-at-a-time'
Linus Torvalds [Fri, 4 May 2012 14:50:50 +0000 (07:50 -0700)]
Merge branch 'fix-unmapped-word-at-a-time'

Jana Saout confirmed that this fixes the page faults he saw.

His problem was triggered by ocfs2 and autofs symlink lookups, where the
symlink allocation was at the end of a page.  But the deeper reason
seems to be the use of Xen-PV, which is what then causes him to have all
these unmapped pages, which is what then makes it a problem when the
unaligned word-at-a-time code fetches data past the end of a page.

* fix-unmapped-word-at-a-time:
  vfs: make word-at-a-time accesses handle a non-existing page

12 years agousb:hsotg:samsung: err_irq: support for probe function
Lukasz Majewski [Fri, 4 May 2012 12:17:16 +0000 (14:17 +0200)]
usb:hsotg:samsung: err_irq: support for probe function

Missing handler for freeing requested IRQ added.
Moreover clk_ calls has been reorganized.

Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
12 years agousb:hsotg:samsung: Use clk_prepare_enable and clk_disable_unprepare
Lukasz Majewski [Fri, 4 May 2012 12:17:15 +0000 (14:17 +0200)]
usb:hsotg:samsung: Use clk_prepare_enable and clk_disable_unprepare

This commit adjust the s3c-hsotg to new clock API.

Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
12 years agousb:hsotg:samsung: Remove the S3C_ prefix from registers definition.
Lukasz Majewski [Fri, 4 May 2012 12:17:14 +0000 (14:17 +0200)]
usb:hsotg:samsung: Remove the S3C_ prefix from registers definition.

This code removes the S3C_ prefix from s3c-hsotg driver. This change
provides more architecture independent code.

Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
12 years agousb:hsotg:samsung: Add release function for hsotg device
Lukasz Majewski [Fri, 4 May 2012 12:17:13 +0000 (14:17 +0200)]
usb:hsotg:samsung: Add release function for hsotg device

Add release function to prevent kernel warning.
Kfree is performed when all references are gone.

Signed-off-by: Sangwook Lee <sangwook.lee@linaro.org>
Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
12 years agousb:hsotg:samsung: Remove our_hsotg global pointer
Lukasz Majewski [Fri, 4 May 2012 12:17:12 +0000 (14:17 +0200)]
usb:hsotg:samsung: Remove our_hsotg global pointer

The our_hsotg global pointer to hsotg USB device state is removed.
It has been replaced with to_hsotg(gadget) function.

Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
12 years agousb:hsotg:samsung: Comments reorganization and cleanup
Lukasz Majewski [Fri, 4 May 2012 12:17:11 +0000 (14:17 +0200)]
usb:hsotg:samsung: Comments reorganization and cleanup

Refactor all comments to comply with kernel codding style.
Moreover doxygen descriptions have been added for selected functions.

Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
12 years agousb:hsotg:samsung: Use new udc_start and udc_stop callbacks
Lukasz Majewski [Fri, 4 May 2012 12:17:10 +0000 (14:17 +0200)]
usb:hsotg:samsung: Use new udc_start and udc_stop callbacks

Replace of deprecated start and stop callbacks with a udc_start and
udc_stop ones.

Now the bind from composite driver is NOT called explicitly, so more
work needs to be done at s3c_udc_probe. Especially enabling SoC clocks
and power for runtime determination of EP number.
After probing, those sources are disabled and enabled again at udc_start
and pullup afterwards.

Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
Signed-off-by: Sangwook Lee <sangwook.lee@linaro.org>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
12 years agousb:hsotg:samsung: Determine number of EPs from HW configuration register
Lukasz Majewski [Fri, 4 May 2012 12:17:09 +0000 (14:17 +0200)]
usb:hsotg:samsung: Determine number of EPs from HW configuration register

This commit adds support for determining of EPs number during run time.

Configuration is read from a HW configuration register in a specially
created s3c_hsotg_hw_cfg function.

Moreover it was necessary to defer at probe allocation of the
struct s3c_hsotg_ep instances until number of endpoints is known.

Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
12 years agousb:hsotg:samsung: Cable disconnection recovery code
Lukasz Majewski [Fri, 4 May 2012 12:17:08 +0000 (14:17 +0200)]
usb:hsotg:samsung: Cable disconnection recovery code

This code allows Samsung SoC's to recover its state when
device is disconnected and connected during transfer.

It is necessary, in such a scenario, to reinitialize the USB core
to assure correct initial state of the driver.
This operation is needed since the disconnect interrupt is only
available at HOST mode, which is not supported by this driver.

A simple mechanism with jiffies has been used to perform core reset
only once.

Tested with:
- DFU gadget (various size of the sent data - also packet = MPS)
- Ethernet gadget (CDC and RNDIS)
- Multi Function Gadget (g_multi)

HW:
- Samsung's C210 Universal rev.0

Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
12 years agousb:hsotg:samsung: Rename s3c_hsotg_disconnect function
Lukasz Majewski [Fri, 4 May 2012 12:17:07 +0000 (14:17 +0200)]
usb:hsotg:samsung: Rename s3c_hsotg_disconnect function

The s3c_hsotg_disconnect_irq function has been renamed to
reflect, that it can be used not only during the host
disconnect irq.

The s3c_hsotg_disconnect shall be used as a fall back for
scenario when USB cable is unplugged and plugged to the
device.

Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
12 years agousb:hsotg:samsung: Remove Disconnect Interrupt handler
Lukasz Majewski [Fri, 4 May 2012 12:17:06 +0000 (14:17 +0200)]
usb:hsotg:samsung: Remove Disconnect Interrupt handler

The USB Disconnect Interrupt handler, according to specification,
is only working at HOST mode.

Samsung SoCs (e.g. Exynos4) are working at device mode, so
this interrupt is never caught.

Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
12 years agousb:hsotg:samsung: Extract core initialization function
Lukasz Majewski [Fri, 4 May 2012 12:17:05 +0000 (14:17 +0200)]
usb:hsotg:samsung: Extract core initialization function

The s3c_hsotg_core_init function has been added to exclude
code responsible for Samsung's SoCs USB core initialization.

Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
12 years agousb:hsotg:samsung: Sending ZLP packet for IN EP0 transfers
Lukasz Majewski [Fri, 4 May 2012 12:17:04 +0000 (14:17 +0200)]
usb:hsotg:samsung: Sending ZLP packet for IN EP0 transfers

This commit targets following scenarios for IN requests:

1. HOST requests e.g. 256B (which is a multiple of MPS = 64B).
Then NO ZLP shall be sent, since host expects exact number of bytes.

2. HOST requested 4096B, but our data for sending is 256B. In this
situation ZLP shall be send to tell HOST that no more data is available
and it shall not wait for more data. This prevents HOST from hanging.

Tested with:
- DFU gadget (various size of the sent data - also packet = MPS)
- Ethernet gadget (CDC and RNDIS)
- Multi Function Gadget (g_multi)

HW:
- Samsung's C210 Universal rev.0
- Samsung's C110 GONI

Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
12 years agousb:hsotg:samsung: NAK management for EP0 (Setup stage of control transfers)
Lukasz Majewski [Fri, 4 May 2012 12:17:03 +0000 (14:17 +0200)]
usb:hsotg:samsung: NAK management for EP0 (Setup stage of control transfers)

For SETUP stage of USB control transmission, the NAK shall NOT be
CLEAR.

The SNAK/CNAK control is crucial for this type of driver,
since data arrives to earlier defined requests.

Tested with:
- DFU gadget (various size of the sent data - also packet = MPS)
- Ethernet gadget (CDC and RNDIS)
- Multi Function Gadget (g_multi)

HW:
- Samsung's C210 Universal rev.0

Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
12 years agousb:hsotg:samsung: Use of regulator_bulk_* functions for USB regulators
Lukasz Majewski [Fri, 4 May 2012 12:17:02 +0000 (14:17 +0200)]
usb:hsotg:samsung: Use of regulator_bulk_* functions for USB regulators

This commit adds support for supply voltage management for s3c-hsotg IP
block. For that purpose a convenient regulator_bulk_* functions have been
used.

Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: Liam Girdwood <lrg@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
12 years agousb:hsotg:samsung: Wrappers for USB PHY methods
Lukasz Majewski [Fri, 4 May 2012 12:17:01 +0000 (14:17 +0200)]
usb:hsotg:samsung: Wrappers for USB PHY methods

Wrappers for PHY methods have been added for readability and reduction
of code repetition.

Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
12 years agousb:hsotg:samsung: Remove platform dependent functions from s3c-hsotg
Lukasz Majewski [Fri, 4 May 2012 12:17:00 +0000 (14:17 +0200)]
usb:hsotg:samsung: Remove platform dependent functions from s3c-hsotg

Two functions - namely: s3c_hsotg_gate and s3c_hsotg_otgreset are platform
dependent and therefore removed from Samsung's generic s3c-hsotg code.

Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
12 years agousb:hsotg:samsung: Remove platform dependency from s3c-hsotg
Lukasz Majewski [Fri, 4 May 2012 12:16:59 +0000 (14:16 +0200)]
usb:hsotg:samsung: Remove platform dependency from s3c-hsotg

This code removes platform dependency from s3c-hsotg driver.

Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
12 years agof_fs: ffs_func_free: cleanup requests allocated by autoconfig
Peter Korsgaard [Thu, 3 May 2012 10:58:49 +0000 (12:58 +0200)]
f_fs: ffs_func_free: cleanup requests allocated by autoconfig

functionfs was leaking request objects created by autoconfig.

Signed-off-by: Peter Korsgaard <peter.korsgaard@barco.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
12 years agousb: gadget: add isochronous support to gadget zero
Paul Zimmerman [Mon, 16 Apr 2012 21:19:06 +0000 (14:19 -0700)]
usb: gadget: add isochronous support to gadget zero

Add two isochronous endpoints to the gadget zero source/sink
function. They are enabled by selecting alternate interface 1, so
by default they are not enabled. Module parameters for setting all
the isoc endpoint characteristics are also provided.

Signed-off-by: Pratyush Anand <pratyush.anand@st.com>
Signed-off-by: Paul Zimmerman <paulz@synopsys.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
12 years agousb: gadget: add a sparse endian notation
Dan Carpenter [Tue, 17 Apr 2012 06:30:22 +0000 (09:30 +0300)]
usb: gadget: add a sparse endian notation

The original code works fine, but Sparse complains because it isn't
annotated properly.

drivers/usb/gadget/composite.c:793:26: warning: incorrect type in assignment (different base types)
drivers/usb/gadget/composite.c:793:26:    expected unsigned short [unsigned] [usertype] language
devel/drivers/usb/gadget/composite.c:793:26:    got restricted __le16 [usertype] <noident>
devel/drivers/usb/gadget/composite.c:795:29: warning: restricted __le16 degrades to integer
drivers/usb/gadget/composite.c:798:24: warning: incorrect type in assignment (different base types)
drivers/usb/gadget/composite.c:798:24:    expected restricted __le16 [usertype] <noident>
devel/drivers/usb/gadget/composite.c:798:24:    got unsigned short [unsigned] [usertype] language

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
12 years agousb: gadget: r8a66597-udc: add support for set_selfpowered
Shimoda, Yoshihiro [Wed, 11 Apr 2012 09:51:28 +0000 (18:51 +0900)]
usb: gadget: r8a66597-udc: add support for set_selfpowered

The previous code always set to USB_DEVICE_SELF_POWERED in GET_STATUS.
So, this patch adds set_selfpowered().

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
12 years agousb: gadget: Include i.MX processors in the USB_FSL_USB2 help text
Fabio Estevam [Mon, 9 Apr 2012 20:14:16 +0000 (17:14 -0300)]
usb: gadget: Include i.MX processors in the USB_FSL_USB2 help text

USB_FSL_USB2 driver can be used on PowerPC and i.MX processors.

Include i.MX processors in the USB_FSL_USB2 help text.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
12 years agousb: gadget: fsl_udc_core: dTD's next dtd pointer need to be updated once written
Peter Chen [Sun, 1 Apr 2012 07:17:16 +0000 (15:17 +0800)]
usb: gadget: fsl_udc_core: dTD's next dtd pointer need to be updated once written

dTD's next dtd pointer need to be updated once CPU writes it, or this
request may not be handled by controller, then host will get NAK from
device forever.

This problem occurs when there is a request is handling, we need to add
a new request to dTD list, if this new request is added before the current
one is finished, the new request is intended to added as next dtd pointer
at current dTD, but without wmb(), the dTD's next dtd pointer may not be
updated when the controller reads it. In that case, the controller will
still get Terminate Bit is 1 at dTD's next dtd pointer, that means there is
no next request, then this new request is missed by controller.

CC: <stable@vger.kernel.org>
Signed-off-by: Peter Chen <peter.chen@freescale.com>
Acked-by: Li Yang <leoli@freescale.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
12 years agousb: gadget: composite: prevent a memory leak when configuration bind fails
Yongsul Oh [Tue, 20 Mar 2012 01:38:38 +0000 (10:38 +0900)]
usb: gadget: composite: prevent a memory leak when configuration bind fails

In some USB composite gadget drivers, the configuration's bind function called
by the usb_add_config() calls multiple bind config functions. (for example cdc2
configuration bind function in the cdc_do_config() of the cdc2.c has two
functionality bind config functions.
  - the ecm_bind_config() & the acm_bind_config())

In each functionality bind config function, new instance is allocated and
finally added by the usb_add_function().

So if an error occurred during the second functionality bind config (for
example an error occurred at the acm_bind_config() after succeeding of the
ecm_bind_function()), the instance created by the acm_bind_config() cannot be
freed creating a memory leak.

This patch fixes this issue.

Signed-off-by: Yongsul Oh <yongsul96.oh@samsung.com>
Acked-by: Michal Nazarewicz <mina86@mina86.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
12 years agousb: gadget: f_mass_storage: remove deprecated fsg_add()
Michal Nazarewicz [Fri, 16 Mar 2012 11:25:42 +0000 (12:25 +0100)]
usb: gadget: f_mass_storage: remove deprecated fsg_add()

There are no in-tree fsg_add() users and it has been deprecated
since 2.6.35 [1dc90985d1: fsg_add() renamed to fsg_bind_config()] so
out-of-tree users had more then enough time to convert.  Removing.

Signed-off-by: Michal Nazarewicz <mina86@mina86.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
12 years agousb: renesas_usbhs: gadget: add support for set_selfpowered
Shimoda, Yoshihiro [Fri, 16 Mar 2012 04:10:15 +0000 (13:10 +0900)]
usb: renesas_usbhs: gadget: add support for set_selfpowered

The previous code always set to USB_DEVICE_SELF_POWERED in GET_STATUS.
So, this patch adds set_selfpowered().

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
12 years agousb: gadget: dummy_hcd: allow to free requests on disabled endpoints
Sebastian Andrzej Siewior [Thu, 9 Feb 2012 08:24:59 +0000 (09:24 +0100)]
usb: gadget: dummy_hcd: allow to free requests on disabled endpoints

ep->desc is set to NULL on endpoint disable. That means once an endpoint
is disabled it is not possible to free requests. In my target gadget I
first disable endpoints to make sure I have no requests on the fly and
then free frequests. On dummy I am leaking memory here.
Since I can't imagine a reason why it should be a bad thing, lets allow
to free requests on disabled endpoints. On removal of composite the ep0
request is removed so lets allow that here as well.

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Felipe Balbi <balbi@ti.com>
12 years agousb: gadget: make g_printer use composite
Sebastian Andrzej Siewior [Sat, 4 Feb 2012 17:55:20 +0000 (18:55 +0100)]
usb: gadget: make g_printer use composite

This patch converts the g_printer to make use of the compoiste framework
for descriptor parsing instead of its own implementation of it.
This gadget contains now one function which is the printer gadget.
Compile tested only.

Signed-off-by: Sebastian Andrzej Siewior <sebastian@breakpoint.cc>
Signed-off-by: Felipe Balbi <balbi@ti.com>
12 years agousb: gadget: remove DUALSPEED from printer
Sebastian Andrzej Siewior [Fri, 10 Feb 2012 12:47:47 +0000 (13:47 +0100)]
usb: gadget: remove DUALSPEED from printer

This patch removes the DUALSPEED macro and makes the HS (and FS) case
the default. This is one little step before composite can be used for
descriptor management.

Signed-off-by: Sebastian Andrzej Siewior <sebastian@breakpoint.cc>
Signed-off-by: Felipe Balbi <balbi@ti.com>
12 years agousb: gadget: imx_udc: convert to new style start/stop
Sebastian Andrzej Siewior [Sat, 4 Feb 2012 17:55:28 +0000 (18:55 +0100)]
usb: gadget: imx_udc: convert to new style start/stop

This patches converts the driver into the new style start/stop interface.
As a result the driver no longer uses the static global controller
variable in start/stop code. I kept the gloval controller variable because
it keeps init simple.
Compile tested only.

Signed-off-by: Sebastian Andrzej Siewior <sebastian@breakpoint.cc>
Signed-off-by: Felipe Balbi <balbi@ti.com>
12 years agousb: gadget: fsl_qe_udc: remove not implemented callbacks
Sebastian Andrzej Siewior [Sat, 4 Feb 2012 17:55:26 +0000 (18:55 +0100)]
usb: gadget: fsl_qe_udc: remove not implemented callbacks

All of this callbacks which I remove here are not implemented and return
an error code. The gadget code returns an error code if a callback is
missing so there is no need to implement this twice.

Cc: Li Yang <leoli@freescale.com>
Signed-off-by: Sebastian Andrzej Siewior <sebastian@breakpoint.cc>
Signed-off-by: Felipe Balbi <balbi@ti.com>
12 years agousb: gadget: fsl_qe_udc: convert to new style start/stop
Sebastian Andrzej Siewior [Sat, 4 Feb 2012 17:55:25 +0000 (18:55 +0100)]
usb: gadget: fsl_qe_udc: convert to new style start/stop

This patches converts the driver into the new style start/stop interface.
As a result the driver no longer uses the static global udc_conroller variable.
Compile tested only.

Cc: Li Yang <leoli@freescale.com>
Signed-off-by: Sebastian Andrzej Siewior <sebastian@breakpoint.cc>
Signed-off-by: Felipe Balbi <balbi@ti.com>
12 years agousb: gadget: atmel_usba_udc: convert to newstyle start/stop interface
Sebastian Andrzej Siewior [Sat, 4 Feb 2012 17:55:24 +0000 (18:55 +0100)]
usb: gadget: atmel_usba_udc: convert to newstyle start/stop interface

This patches converts the driver into the new style start/stop interface.
As a result the driver no longer uses the static global the_udc
variable in start/stop functions. I kept the the_udc variable since it
makes the init code a little simpler.
Someone with hardware might want to look if it possible to move the vbus
irq/toggle_bias code into ->pullup().

Compile tested only.

Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Sebastian Andrzej Siewior <sebastian@breakpoint.cc>
Signed-off-by: Felipe Balbi <balbi@ti.com>
12 years agousb: gadget: at91_udc: convert to new style start/stop interface
Sebastian Andrzej Siewior [Sat, 4 Feb 2012 17:55:23 +0000 (18:55 +0100)]
usb: gadget: at91_udc: convert to new style start/stop interface

This patches converts the driver into the new style start/stop interface.
As a result the driver no longer uses the static global controller
variable in start/stop functions. I kept the controller variable since it
makes the init code a little simpler.
Compile tested only.

Cc: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sebastian Andrzej Siewior <sebastian@breakpoint.cc>
Signed-off-by: Felipe Balbi <balbi@ti.com>
12 years agousb: gadget: Update s3c-hsudc to use usb_endpoint_descriptor inside the struct usb_ep
Ido Shayevitz [Mon, 12 Mar 2012 18:25:40 +0000 (20:25 +0200)]
usb: gadget: Update s3c-hsudc to use usb_endpoint_descriptor inside the struct usb_ep

Remove redundant pointer to struct usb_endpoint_descriptor.

Signed-off-by: Ido Shayevitz <idos@codeaurora.org>
Signed-off-by: Felipe Balbi <balbi@ti.com>
12 years agousb: gadget: Update pch_udc to use usb_endpoint_descriptor inside the struct usb_ep
Ido Shayevitz [Mon, 12 Mar 2012 18:25:39 +0000 (20:25 +0200)]
usb: gadget: Update pch_udc to use usb_endpoint_descriptor inside the struct usb_ep

Remove redundant pointer to struct usb_endpoint_descriptor.

Signed-off-by: Ido Shayevitz <idos@codeaurora.org>
Signed-off-by: Felipe Balbi <balbi@ti.com>
12 years agousb: gadget: Update s3c2410_udc to use usb_endpoint_descriptor inside the struct...
Ido Shayevitz [Mon, 12 Mar 2012 18:25:38 +0000 (20:25 +0200)]
usb: gadget: Update s3c2410_udc to use usb_endpoint_descriptor inside the struct usb_ep

Remove redundant pointer to struct usb_endpoint_descriptor.

Signed-off-by: Ido Shayevitz <idos@codeaurora.org>
Signed-off-by: Felipe Balbi <balbi@ti.com>
12 years agousb: gadget: Update r8a66597-udc to use usb_endpoint_descriptor inside the struct...
Ido Shayevitz [Mon, 12 Mar 2012 18:25:37 +0000 (20:25 +0200)]
usb: gadget: Update r8a66597-udc to use usb_endpoint_descriptor inside the struct usb_ep

Remove redundant pointer to struct usb_endpoint_descriptor.

Signed-off-by: Ido Shayevitz <idos@codeaurora.org>
Signed-off-by: Felipe Balbi <balbi@ti.com>
12 years agousb: gadget: Update pxa25x_udc to use usb_endpoint_descriptor inside the struct usb_ep
Ido Shayevitz [Mon, 12 Mar 2012 18:25:36 +0000 (20:25 +0200)]
usb: gadget: Update pxa25x_udc to use usb_endpoint_descriptor inside the struct usb_ep

Remove redundant pointer to struct usb_endpoint_descriptor.

Signed-off-by: Ido Shayevitz <idos@codeaurora.org>
Signed-off-by: Felipe Balbi <balbi@ti.com>
12 years agousb: gadget: Update omap_udc to use usb_endpoint_descriptor inside the struct usb_ep
Ido Shayevitz [Mon, 12 Mar 2012 18:25:35 +0000 (20:25 +0200)]
usb: gadget: Update omap_udc to use usb_endpoint_descriptor inside the struct usb_ep

Remove redundant pointer to struct usb_endpoint_descriptor.

Signed-off-by: Ido Shayevitz <idos@codeaurora.org>
Signed-off-by: Felipe Balbi <balbi@ti.com>
12 years agousb: gadget: Update mv_udc to use usb_endpoint_descriptor inside the struct usb_ep
Ido Shayevitz [Mon, 12 Mar 2012 18:25:34 +0000 (20:25 +0200)]
usb: gadget: Update mv_udc to use usb_endpoint_descriptor inside the struct usb_ep

Remove redundant pointer to struct usb_endpoint_descriptor.

Signed-off-by: Ido Shayevitz <idos@codeaurora.org>
Signed-off-by: Felipe Balbi <balbi@ti.com>
12 years agousb: gadget: Update m66592-udc to use usb_endpoint_descriptor inside the struct usb_ep
Ido Shayevitz [Mon, 12 Mar 2012 18:25:33 +0000 (20:25 +0200)]
usb: gadget: Update m66592-udc to use usb_endpoint_descriptor inside the struct usb_ep

Remove redundant pointer to struct usb_endpoint_descriptor.

Signed-off-by: Ido Shayevitz <idos@codeaurora.org>
Signed-off-by: Felipe Balbi <balbi@ti.com>
12 years agousb: gadget: Update langwell_udc to use usb_endpoint_descriptor inside the struct...
Ido Shayevitz [Mon, 12 Mar 2012 18:25:32 +0000 (20:25 +0200)]
usb: gadget: Update langwell_udc to use usb_endpoint_descriptor inside the struct usb_ep

Remove redundant pointer to struct usb_endpoint_descriptor.

Signed-off-by: Ido Shayevitz <idos@codeaurora.org>
Signed-off-by: Felipe Balbi <balbi@ti.com>
12 years agousb: gadget: Update goku_udc to use usb_endpoint_descriptor inside the struct usb_ep
Ido Shayevitz [Mon, 12 Mar 2012 18:25:31 +0000 (20:25 +0200)]
usb: gadget: Update goku_udc to use usb_endpoint_descriptor inside the struct usb_ep

Remove redundant pointer to struct usb_endpoint_descriptor.

Signed-off-by: Ido Shayevitz <idos@codeaurora.org>
Signed-off-by: Felipe Balbi <balbi@ti.com>
12 years agousb: gadget: Update fusb300_udc to use usb_endpoint_descriptor inside the struct...
Ido Shayevitz [Mon, 12 Mar 2012 18:25:30 +0000 (20:25 +0200)]
usb: gadget: Update fusb300_udc to use usb_endpoint_descriptor inside the struct usb_ep

Remove redundant pointer to struct usb_endpoint_descriptor.

Signed-off-by: Ido Shayevitz <idos@codeaurora.org>
Signed-off-by: Felipe Balbi <balbi@ti.com>
12 years agousb: gadget: Update fsl_udc_core to use usb_endpoint_descriptor inside the struct...
Ido Shayevitz [Mon, 12 Mar 2012 18:25:29 +0000 (20:25 +0200)]
usb: gadget: Update fsl_udc_core to use usb_endpoint_descriptor inside the struct usb_ep

Remove redundant pointer to struct usb_endpoint_descriptor.

Signed-off-by: Ido Shayevitz <idos@codeaurora.org>
Signed-off-by: Felipe Balbi <balbi@ti.com>
12 years agousb: gadget: Update fsl_qe_udc to use usb_endpoint_descriptor inside the struct usb_ep
Ido Shayevitz [Mon, 12 Mar 2012 18:25:28 +0000 (20:25 +0200)]
usb: gadget: Update fsl_qe_udc to use usb_endpoint_descriptor inside the struct usb_ep

Remove redundant pointer to struct usb_endpoint_descriptor.

Signed-off-by: Ido Shayevitz <idos@codeaurora.org>
Signed-off-by: Felipe Balbi <balbi@ti.com>
12 years agousb: gadget: Update atmel_usba_udc to use usb_endpoint_descriptor inside the struct...
Ido Shayevitz [Mon, 12 Mar 2012 18:25:27 +0000 (20:25 +0200)]
usb: gadget: Update atmel_usba_udc to use usb_endpoint_descriptor inside the struct usb_ep

Remove redundant pointer to struct usb_endpoint_descriptor.

Signed-off-by: Ido Shayevitz <idos@codeaurora.org>
Signed-off-by: Felipe Balbi <balbi@ti.com>
12 years agousb: gadget: Update at91_udc to use usb_endpoint_descriptor inside the struct usb_ep
Ido Shayevitz [Mon, 12 Mar 2012 18:25:26 +0000 (20:25 +0200)]
usb: gadget: Update at91_udc to use usb_endpoint_descriptor inside the struct usb_ep

Remove redundant pointer to struct usb_endpoint_descriptor.

Signed-off-by: Ido Shayevitz <idos@codeaurora.org>
Signed-off-by: Felipe Balbi <balbi@ti.com>