UPSTREAM: xfrm: Return detailed errors from xfrmi_newlink

Currently all failure modes of xfrm interface creation return EEXIST.
This change improves the granularity of errnos provided by also
returning ENODEV or EINVAL if failures happen in looking up the
underlying interface, or a required parameter is not provided.

This change has been tested against the Android Kernel Networking Tests,
with additional xfrmi_newlink tests here:

https://android-review.googlesource.com/c/kernel/tests/+/715755

Signed-off-by: Benedict Wong <benedictwong@google.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
(cherry picked from commit 44e2b838c24d883dae8496dc7b6ddac7956ba53c)
Bug: 113046120
Change-Id: Ic680bf1e4a828aaae01b289223d9396a551eefd2

UPSTREAM: xfrm: Remove xfrmi interface ID from flowi

In order to remove performance impact of having the extra u32 in every
single flowi, this change removes the flowi_xfrm struct, prefering to
take the if_id as a method parameter where needed.

In the inbound direction, if_id is only needed during the
__xfrm_check_policy() function, and the if_id can be determined at that
point based on the skb. As such, xfrmi_decode_session() is only called
with the skb in __xfrm_check_policy().

In the outbound direction, the only place where if_id is needed is the
xfrm_lookup() call in xfrmi_xmit2(). With this change, the if_id is
directly passed into the xfrm_lookup_with_ifid() call. All existing
callers can still call xfrm_lookup(), which uses a Defenderault if_id of 0.

This change does not change any behavior of XFRMIs except for improving
overall system performance via flowi size reduction.

This change has been tested against the Android Kernel Networking Tests:

https://android.googlesource.com/kernel/tests/+/master/net/test

Signed-off-by: Benedict Wong <benedictwong@google.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
(cherry picked from commit bc56b33404599edc412b91933d74b36873e8ea25)
Bug: 113046120
Change-Id: Icd3a1ea08427b91c54a64318d9dbb9acfb5d429a

UPSTREAM: xfrm: Add virtual xfrm interfaces

This patch adds support for virtual xfrm interfaces.
Packets that are routed through such an interface
are guaranteed to be IPsec transformed or dropped.
It is a generic virtual interface that ensures IPsec
transformation, no need to know what happens behind
the interface. This means that we can tunnel IPv4 and
IPv6 through the same interface and support all xfrm
modes (tunnel, transport and beet) on it.

Co-developed-by: Lorenzo Colitti <lorenzo@google.com>
Co-developed-by: Benedict Wong <benedictwong@google.com>
Signed-off-by: Lorenzo Colitti <lorenzo@google.com>
Signed-off-by: Benedict Wong <benedictwong@google.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Acked-by: Shannon Nelson <shannon.nelson@oracle.com>
Tested-by: Benedict Wong <benedictwong@google.com>
Tested-by: Antony Antony <antony@phenome.org>
Reviewed-by: Eyal Birger <eyal.birger@gmail.com>
(cherry picked from commit f203b76d78092faf248db3f851840fbecf80b40e)
Bug: 113046120
Change-Id: I05e8fe1e8a8a4b01886504ce694ddda29e4fbec6

UPSTREAM: xfrm: Add a new lookup key to match xfrm interfaces.

This patch adds the xfrm interface id as a lookup key
for xfrm states and policies. With this we can assign
states and policies to virtual xfrm interfaces.

Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Acked-by: Shannon Nelson <shannon.nelson@oracle.com>
Acked-by: Benedict Wong <benedictwong@google.com>
Tested-by: Benedict Wong <benedictwong@google.com>
Tested-by: Antony Antony <antony@phenome.org>
Reviewed-by: Eyal Birger <eyal.birger@gmail.com>
(cherry picked from commit 7e6526404adedf079279aa7aa11722deaca8fe2e)
Signed-off-by: Benedict Wong <benedictwong@google.com>
Bug: 113046120
Change-Id: I27d7757a374b0bd5f97c3e723773d6c7470a0717

UPSTREAM: flow: Extend flow informations with xfrm interface id.

Add a new flowi_xfrm structure with informations needed to do
a xfrm lookup. At the moment it keeps the informations about
the new xfrm interface id needed to lookup xfrm interfaces
that are introduced with a followup patch. We need this new
lookup key as other possible keys, like the ifindex is
already part of the xfrm selector and used as a key to
enforce the output device after the transformation in the
policy/state lookup.

Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Acked-by: Shannon Nelson <shannon.nelson@oracle.com>
Acked-by: Benedict Wong <benedictwong@google.com>
Tested-by: Benedict Wong <benedictwong@google.com>
Tested-by: Antony Antony <antony@phenome.org>
Reviewed-by: Eyal Birger <eyal.birger@gmail.com>
(cherry picked from commit d159ce7957eec306eacda672e5909e26675ca8ef)
Signed-off-by: Benedict Wong <benedictwong@google.com>
Bug: 113046120
Change-Id: I70b520d3cf67cd663e84868b0e7cc45ffa74d080

UPSTREAM: xfrm: Extend the output_mark to support input direction and masking.

We already support setting an output mark at the xfrm_state,
unfortunately this does not support the input direction and
masking the marks that will be applied to the skb. This change
adds support applying a masked value in both directions.

The existing XFRMA_OUTPUT_MARK number is reused for this purpose
and as it is now bi-directional, it is renamed to XFRMA_SET_MARK.

An additional XFRMA_SET_MARK_MASK attribute is added for setting the
mask. If the attribute mask not provided, it is set to 0xffffffff,
keeping the XFRMA_OUTPUT_MARK existing 'full mask' semantics.

Co-developed-by: Tobias Brunner <tobias@strongswan.org>
Co-developed-by: Eyal Birger <eyal.birger@gmail.com>
Co-developed-by: Lorenzo Colitti <lorenzo@google.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Tobias Brunner <tobias@strongswan.org>
Signed-off-by: Eyal Birger <eyal.birger@gmail.com>
Signed-off-by: Lorenzo Colitti <lorenzo@google.com>
(cherry picked from commit 9b42c1f179a614e11893ae4619f0304a38f481ae)
Signed-off-by: Benedict Wong <benedictwong@google.com>
Bug: 113046120
Change-Id: I582f0b460dc58f01e0c30afb6167725aa337d054

UPSTREAM: xfrm: fix XFRMA_OUTPUT_MARK policy entry

This seems to be an obvious typo, NLA_U32 is type of the attribute, not its
(minimal) length.

Fixes: 077fbac405bf ("net: xfrm: support setting an output mark.")
Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
(cherry picked from commit e719135881f00c01ca400abb8a5dadaf297a24f9)
Signed-off-by: Benedict Wong <benedictwong@google.com>
Bug: 113046120
Change-Id: I4c1a8de03febfa246b99c7eb67d77f74a1e3ba93

arm64/dts: Set detect headset button twice

arm/dts audio:
Set detect headset button twice to avoid err report.

Change-Id: I6d5ca6f72cfdc7459eb02489edeee432f57dae91
Signed-off-by: Wen Xie <xiewen3@motorola.com>
Reviewed-on: https://gerrit.mot.com/1441697
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Xiangpo Zhao <zhaoxp3@motorola.com>
Submit-Approved: Jira Key

wlbt: Initial Scan will be performed after STA Mac Randomisation.

Initial Scan will be performed after STA Mac Randomisation,
for facilitating faster reconnection to Saved Profiles.

SCSC-Bug-Id: PRI-11557
Moto-CRs-Fixed: (CR)

Change-Id: I8f308745ad4bdce0d04ad58f3042b5cb5a62812c
Signed-off-by: Mohit Ghuley <mohit.ghuley@samsung.com>
Signed-off-by: sunyue5 <sunyue5@motorola.com>
Reviewed-on: https://gerrit.mot.com/1441543
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Hua Tan <tanhua1@motorola.com>
Submit-Approved: Jira Key

usb:configfs:Set udc_name NULL if attach failed

If the probing of UDC controller failed
udc_name shall be NULL to avoid double unregistration
and the panic
It could happen in some corner case

Change-Id: I2e6e4168a505b86d8f1b57db53be91acc608ee97
Signed-off-by: a17671 <a17671@motorola.com>
Reviewed-on: https://gerrit.mot.com/1438349
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Xiangpo Zhao <zhaoxp3@motorola.com>
Submit-Approved: Jira Key

Revert "(CR): wlbt: update pmu sequence"

This reverts commit 4e2e4c5090cd3fad1b24e1fb81e94c8b38867e53.

Change-Id: I062461db80799c48f9119606866b2668a12694fe
Reviewed-on: https://gerrit.mot.com/1437290
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Hua Tan <tanhua1@motorola.com>
Submit-Approved: Jira Key

wlbt: update pmu sequence

Change-Id: I161372cee02d25b312968d4c075acccab6ac23eb
Signed-off-by: Youngsoo <youngss.kim@samsung.com>
Signed-off-by: sunyue5 <sunyue5@motorola.com>
Reviewed-on: https://gerrit.mot.com/1436932
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Hua Tan <tanhua1@motorola.com>
Submit-Approved: Jira Key

Revert "printk: add cpu info into kernel log"

Change-Id: I20b58073db759906e2892e14373148a51e2aef99
Signed-off-by: sunyue5 <sunyue5@motorola.com>
Reviewed-on: https://gerrit.mot.com/1435441
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Zonghua Liu <a17671@motorola.com>
Reviewed-by: Xiangpo Zhao <zhaoxp3@motorola.com>
Submit-Approved: Jira Key

kernel:optimize cdp thermal charGing limitation

Optimize cdp thermal
charGing limitation

Change-Id: I1ce95bd96e8f257ab103720609d93842840868d5
Signed-off-by: xuwei9 <xuwei9@mt.com>
Reviewed-on: https://gerrit.mot.com/1435344
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Xiangpo Zhao <zhaoxp3@motorola.com>
Submit-Approved: Jira Key

fimc-is2: fix ITS scene0 test_read_write

update exposure metadata update timing to fix exposure
mismatch for raw and jpg case

Change-Id: I7bf61b8d89da819ce8974e2c7f887c3ed6ed2e3a
Signed-off-by: wangdw10 <wangdw10@mt.com>
Reviewed-on: https://gerrit.mot.com/1433855
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Biming Li <libm1@motorola.com>
Reviewed-by: Dawei Wang <wangdw10@motorola.com>
Reviewed-by: Zhichao Chen <chenzc2@motorola.com>
Submit-Approved: Jira Key

fimc-is2: disable fast AF trigger

make sure DDK and HAL use same frame to update AF status

Change-Id: Ia073d29846ecd2a86f1f70582e54e7d22b50b654
Signed-off-by: libm1 <libm1@mt.com>
Reviewed-on: https://gerrit.mot.com/1434209
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Dawei Wang <wangdw10@motorola.com>
Reviewed-by: Biming Li <libm1@motorola.com>
Reviewed-by: Zhichao Chen <chenzc2@motorola.com>
Submit-Approved: Jira Key

Support APEX on samsung platform

Change-Id: If15e3cc404b4f6cb6b582877a55aa5779cbac5e7
Signed-off-by: huangzq2 <huangzq2@motorola.com>
Reviewed-on: https://gerrit.mot.com/1427696
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Xiangpo Zhao <zhaoxp3@motorola.com>
Submit-Approved: Jira Key

Revert "ANDROID: dm verity: add minimum prefetch size"

This reverts commit ace74ccf82cfb2b73ce1df2e698d20c2fbc559dd.

Mot-CRs-fixed: (CR)

Bug: 71728490
Change-Id: Iebcb0cd9982f36c4bd2552811f9147325a291db0
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Reviewed-on: https://gerrit.mot.com/1427695
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Xiangpo Zhao <zhaoxp3@motorola.com>
Submit-Approved: Jira Key

UPSTREAM: loop: Add LOOP_SET_BLOCK_SIZE in compat ioctl

This change adds LOOP_SET_BLOCK_SIZE as one of the supported ioctls
in lo_compat_ioctl. It only takes an unsigned long argument, and
in practice a 32-bit value works fine.

Mot-CRs-fixed: (CR)

Bug: 117823094
Change-Id: I0061a082eb2632c47b7d66f35f2c909d33ff1653
Reviewed-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Evan Green <evgreen@chromium.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
(cherry picked from commit 9fea4b395260175de4016b42982f45a3e6e03d0b)
Signed-off-by: Martijn Coenen <maco@android.com>
Reviewed-on: https://gerrit.mot.com/1427694
Tested-by: Jira Key
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Reviewed-by: Xiangpo Zhao <zhaoxp3@motorola.com>
Submit-Approved: Jira Key

Revert "proc: Convert proc_mount to use mount_ns."

This cleanup broke the parsing of procfs mount parameters.

Bug: 79705088
Mot-CRs-Fixed:(CR)

Signed-off-by: Alistair Strachan <astrachan@google.com>
Change-Id: If6159e6501a5f9a77dd2c4ff339d378ac271fdf4
Signed-off-by: a17671 <a17671@motorola.com>
Reviewed-on: https://gerrit.mot.com/1420288
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Xiangpo Zhao <zhaoxp3@motorola.com>
Submit-Approved: Jira Key

UPSTREAM: zsmalloc: introduce zs_huge_class_size()

Patch series "zsmalloc/zram: drop zram's max_zpage_size", v3.

ZRAM's max_zpage_size is a bad thing.  It forces zsmalloc to store
normal objects as huge ones, which results in bigger zsmalloc memory
usage.  Drop it and use actual zsmalloc huge-class value when decide if
the object is huge or not.

This patch (of 2):

Not every object can be share its zspage with other objects, e.g.  when
the object is as big as zspage or nearly as big a zspage.  For such
objects zsmalloc has a so called huge class - every object which belongs
to huge class consumes the entire zspage (which consists of a physical
page).  On x86_64, PAGE_SHIFT 12 box, the first non-huge class size is
3264, so starting down from size 3264, objects can share page(-s) and
thus minimize memory wastage.

ZRAM, however, has its own statically Defenderined watermark for huge
objects, namely "3 * PAGE_SIZE / 4 = 3072", and forcibly stores every
object larger than this watermark (3072) as a PAGE_SIZE object, in other
words, to a huge class, while zsmalloc can keep some of those objects in
non-huge classes.  This results in increased memory consumption.

zsmalloc knows better if the object is huge or not.  Introduce
zs_huge_class_size() function which tells if the given object can be
stored in one of non-huge classes or not.  This will let us to drop
ZRAM's huge object watermark and fully rely on zsmalloc when we decide
if the object is huge.

[sergey.senozhatsky.work@gmail.com: add pool param to zs_huge_class_size()]
Link: http://lkml.kernel.org/r/20180314081833.1096-2-sergey.senozhatsky@gmail.com
Link: http://lkml.kernel.org/r/20180306070639.7389-2-sergey.senozhatsky@gmail.com
Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
(cherry picked from commit 010b495e2fa32353d0ef6aa70a8169e5ef617a15)
Signed-off-by: Peter Kalauskas <peskal@google.com>
Bug: 113183619
Change-Id: I842d8234a53f30d2803139107f420f7217d6df6e
Reviewed-on: https://gerrit.mot.com/1416293
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Guolin Wang <wanggl3@mt.com>
Submit-Approved: Jira Key

Enable zram writeback

Porting zram changes from Google, and enable zram writeback

Change-Id: I1bcb545dd4cdeb7f456d2f609fdb43cd9a822816
Signed-off-by: huangzq2 <huangzq2@motorola.com>
Reviewed-on: https://gerrit.mot.com/1416294
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Guolin Wang <wanggl3@mt.com>
Submit-Approved: Jira Key

config: Enable SCSC_WLAN_ABNORMAL_MULTICAST_PKT_FILTER

Drop pkts whose mac address are unicast and ip address
are multicast. It can optimize wifi power consumption.

Change-Id: I5fcb63783e76a4dae78b8305d6e0fc0a009c1aa7
Signed-off-by: sunyue5 <sunyue5@motorola.com>
Reviewed-on: https://gerrit.mot.com/1415107
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Xiangpo Zhao <zhaoxp3@motorola.com>
Submit-Approved: Jira Key

Sensor: sx9325 malloc memory size err.

The parameter of sizeof is the structure pointer,
so the allocation size is 8,which leads memory crossing the boundary.

Change-Id: I04e19739b378a948e6ae681e45bcfdacc07ff16c
Signed-off-by: Wen Xie <xiewen3@motorola.com>
Reviewed-on: https://gerrit.mot.com/1407951
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Xiangpo Zhao <zhaoxp3@motorola.com>
Submit-Approved: Jira Key

oem:add oem partition into avb auth chain

create a node at device tree, the system can auto-mount the oem
partition according to the info in the tree node

Change-Id: I944804b129df5a68d8618cae898363229dfa0620
Reviewed-on: https://gerrit.mot.com/1407728
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Xiangpo Zhao <zhaoxp3@motorola.com>
Submit-Approved: Jira Key

dts: add pm-ignore-notify on mmc

add pm-ignore-notify om mmc
picked up from ODM patch

Change-Id: Ia551e6dac0aac97a945d97dd49eba49427d0e071
Signed-off-by: dengwei1 <dengwei1@motorola.com>
Reviewed-on: https://gerrit.mot.com/1404596
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Xiangpo Zhao <zhaoxp3@motorola.com>
Submit-Approved: Jira Key

Troika : vibrator reset itself when IC hang

check with IC vendor
reset the IC when it hang

Change-Id: I5a169e10a3d9b544ab7b041bf9e2fcad9d672f5b
Signed-off-by: dengwei1 <dengwei1@motorola.com>
Reviewed-on: https://gerrit.mot.com/1400750
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Wei Xu <xuwei9@mt.com>
Reviewed-by: Xiangpo Zhao <zhaoxp3@motorola.com>
Submit-Approved: Jira Key
(cherry picked from commit 4455d772f87642258340ba5d913a7b26c4820357)
Reviewed-on: https://gerrit.mot.com/1400777

Troika : vib fix stop delay time

discuss with vendor
Troika  vib fix stop delay time

Change-Id: I6ff5a56adf7990b90e0edabb97907a8cef25d812
Signed-off-by: dengwei1 <dengwei1@motorola.com>
Reviewed-on: https://gerrit.mot.com/1397445
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Wei Xu <xuwei9@mt.com>
Reviewed-by: Xiangpo Zhao <zhaoxp3@motorola.com>
Submit-Approved: Jira Key

usb: configfs: skip unregister gadget in secure

There will be gadget driver unregister twice in USB secure
when try to set the UDC to none from userspace, which will cause
kernel panic in 4.9 kernel version, as there is a feature
about pending gadget driver list being added in this version.

As a solution, make sure gadget driver unregister or probe only
once over secure mode entry or usb configure from userspace.

Kernel BUG at ffffff8093067140 [verbose debug info unavailable]
Internal error: Accessing user space memory outside uaccess.h

Change-Id: I89f03afbf9716a95aae37e354cc0cb293b2ea090
Signed-off-by: a17671 <a17671@motorola.com>
Reviewed-on: https://gerrit.mot.com/1376192
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Xiangpo Zhao <zhaoxp3@motorola.com>
Submit-Approved: Jira Key

usb: configfs: synchronize the secure and udc_name state

The gadget driver unregister/probe is not allowed to reentry
for the same udc.

As the conditions for gadget driver unregister/probe entry,
gadget secure and udc_name status should be synchronized.
Otherwise, in old implement code logic, there is still a chance
to fall into trouble of gadget driver unregister/probe reentry
for the same udc.

Change-Id: I6eb30a36eab84afd656f5bee9678e8d44933c6bc
Signed-off-by: Yonghua Yan <yanyh2@motorola.com>
Reviewed-on: https://gerrit.mot.com/1287442
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Yuecai Liu <liuyc20@motorola.com>
Reviewed-by: Jianqi Yang <yangj@motorola.com>
Submit-Approved: Jira Key
Reviewed-on: https://gerrit.mot.com/1376191
Reviewed-by: Xiangpo Zhao <zhaoxp3@motorola.com>

fix the f2fs mount failed issue in low memory case

On the RACK test, the SDcard often mount failed becuase of the
page allocation failure. After checked with f2fs owner, we can
use kvzmalloc to alloc non-continuous memory in case continuous
memory allocation failed.

Change-Id: Ifd83e8b9a6bff241ed851007a3b7aec49b413eb3
Signed-off-by: huangzq2 <huangzq2@motorola.com>
Reviewed-on: https://gerrit.mot.com/1370212
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Wei Deng <dengwei1@motorola.com>
Reviewed-by: Xiangpo Zhao <zhaoxp3@motorola.com>
Submit-Approved: Jira Key

cpufreq: enable CPU_FREQ_TIMES option

Change-Id: Id1c0b17b73ed1e4df9e0d098ecf48882daa38641
Signed-off-by: luodw1 <luodw1@motorola.com>
Reviewed-on: https://gerrit.mot.com/1369617
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Hua Tan <tanhua1@motorola.com>
Submit-Approved: Jira Key

Kane: input pick up touch firmware update from vendor

input pick up touch firmware update
from himax vendor

Change-Id: Idacdf441db8edd83da5a56b68640691e27c6089e
Signed-off-by: dengwei1 <dengwei1@motorola.com>
Reviewed-on: https://gerrit.mot.com/1378200
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Hua Tan <tanhua1@motorola.com>
Submit-Approved: Jira Key
(cherry picked from commit 2222e8b9b47550332c02bc0ac63e5159aaa16840)
Reviewed-on: https://gerrit.mot.com/1396950

kane: input update touch fw progress

update the touch fw progress
to make sure success

Change-Id: I4eb39e13ddc74d629fb8e184033a5873db28f57f
Signed-off-by: dengwei1 <dengwei1@motorola.com>
Reviewed-on: https://gerrit.mot.com/1373092
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Hua Tan <tanhua1@motorola.com>
Submit-Approved: Jira Key
(cherry picked from commit f80727c7665bb31e5f78702db6c8a791c96b1091)
Reviewed-on: https://gerrit.mot.com/1396782

debug: add debug logs when keys has action

Change-Id: Ic880e8ab4199ca93019f38d3bbee2764f95a6c0b
Signed-off-by: luodw1 <luodw1@motorola.com>
Reviewed-on: https://gerrit.mot.com/1391470
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Xiangpo Zhao <zhaoxp3@motorola.com>
Submit-Approved: Jira Key

arm64:Defenderconfig: remove enforcing from cmdline

cmdline will be too long

Change-Id: Ib5c7d4c3c0546b518b4d7395f90e64b2e9b9783c
Signed-off-by: zhaoxp3 <zhaoxp3@motorola.com>
Reviewed-on: https://gerrit.mot.com/1390660
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Submit-Approved: Jira Key

arm64/dts: Sensor: Modify Capsensor GPIO mode.

Modify CapSensor interrupt GPIO to pull-up mode,
Avoid virtual welding of pull-up resistance in factory.

Change-Id: Ib3943f7a9b47f16243b506c0561db4dfc377bcbc
Signed-off-by: Wen Xie <xiewen3@motorola.com>
Reviewed-on: https://gerrit.mot.com/1388116
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Xiangpo Zhao <zhaoxp3@motorola.com>
Submit-Approved: Jira Key

arm/dts: kane/Troika : disable KASAN feature

Change-Id: Ic98bb2a7ab952e38f3a2e9807bce29e732e8dfc7
Signed-off-by: wangdw10 <wangdw10@mt.com>
Reviewed-on: https://gerrit.mot.com/1384583
SME-Granted: SME Approvals Granted
Submit-Approved: Jira Key
Tested-by: Jira Key
SLTApproved: Slta Waiver
Reviewed-by: Dawei Wang <wangdw10@motorola.com>

[COMMON] fimc-is2: code sync for kane/Troika  Q upgrade

Change-Id: Ia3337813762117cfa811676e0de09ac3b1506942
Signed-off-by: wangdw10 <wangdw10@mt.com>
Reviewed-on: https://gerrit.mot.com/1384347
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Submit-Approved: Jira Key
Tested-by: Jira Key
Reviewed-by: Dawei Wang <wangdw10@motorola.com>

arm/dts: kane/Troika : add camera support for q upgrade

Change-Id: Ia17b1bb06aaf9d9bf47a4850000db7bf4c407e34
Signed-off-by: wangdw10 <wangdw10@mt.com>
Reviewed-on: https://gerrit.mot.com/1384346
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Submit-Approved: Jira Key
Tested-by: Jira Key
Reviewed-by: Dawei Wang <wangdw10@motorola.com>

ASoC: wm_adsp: Fix halo scratch register reading.

Halo register addresses increment by 8 instead of the usual 4. Read
sequential scratch registers accordingly.

MOT-CRs-fixed: (CR)
Signed-off-by: James Bodzay <jbodzay@opensource.cirrus.com>
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Change-Id: I88294fa44ba1748b5127824b708bbbf8122dcfc8
Reviewed-on: https://gerrit.mot.com/1383853
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Submit-Approved: Jira Key
Tested-by: Jira Key
Reviewed-by: Zhengming Yao <yaozm1@mt.com>

kane Q bringup

disable oem
sync Q Defenderconfig
battery pickup
Change-Id: I9200c2fa391a4beb46834524e6981deed095eb55
Signed-off-by: zhaoxp3 <zhaoxp3@motorola.com>

pass Q build

Change-Id: Id843bf48ae346e4951fbffe6986b5ba272c9a1f2

Q AndroidKernel.mk

Change-Id: Iae6ef8e8f881b7fc81f8f5234853bca867842a6e

Extcon: Fix mic high level of noise.

cirrus vendor patch:
Fix mic high level of noise Set MICD_RATE and
POLARITY_INV bit to 0 when a headset with mic is plugged in and set it in a
Defenderault state at removail.

Change-Id: I7ed17ef425cc3e9e0d03541996e9ea1427ee8013
Signed-off-by: Wen Xie <xiewen3@motorola.com>
Reviewed-on: https://gerrit.mot.com/1362099
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Zhengming Yao <yaozm1@mt.com>
Reviewed-by: Xiangpo Zhao <zhaoxp3@motorola.com>
Submit-Approved: Jira Key

arm64/dts: Trokia remove ext-cap config.

Due to hardware modification,external capacitor is removed,
so the relevant software config needs to be deleted.

Change-Id: Ifdc4d3b701ac0abec7a600cdb8ebaaa93b1c9fb1
Signed-off-by: Wen Xie <xiewen3@motorola.com>
Reviewed-on: https://gerrit.mot.com/1362047
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Zhengming Yao <yaozm1@mt.com>
Reviewed-by: Xiangpo Zhao <zhaoxp3@motorola.com>
Submit-Approved: Jira Key

[9610] fimc-is2: Buffer modification in case of otp data error at 5e9 module

CRs-fixed: (CR)

Change-Id: I45c71a809efb2cb65955977b0194a89e13771d0e
Signed-off-by: Dohyun Kim <dh5.kim@samsung.com>
Reviewed-on: https://gerrit.mot.com/1358072
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Dawei Wang <wangdw10@motorola.com>
Reviewed-by: Biming Li <libm1@motorola.com>
Reviewed-by: Zhichao Chen <chenzc2@motorola.com>
Submit-Approved: Jira Key

[9610] fimc-is2: fix accessing to out of boundary at otp checking seq in 5e9 module

CRs-fixed: (CR)

Change-Id: I3b2f4a3a9f07d19234091b5bae7abdfd6c87c3b8
Signed-off-by: Dohyun Kim <dh5.kim@samsung.com>
Reviewed-on: https://gerrit.mot.com/1358071
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Dawei Wang <wangdw10@motorola.com>
Reviewed-by: Biming Li <libm1@motorola.com>
Reviewed-by: Zhichao Chen <chenzc2@motorola.com>
Submit-Approved: Jira Key

Allow set single channel for ACS

Moto uses vendor.wifi.certchannel to set single channel
for ACS

Change-Id: I6990b132d972f4a0bc2d4901b0c9e38cd5956d84
Signed-off-by: sunyue5 <sunyue5@motorola.com>
Reviewed-on: https://gerrit.mot.com/1358073
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Hua Tan <tanhua1@motorola.com>
Submit-Approved: Jira Key

Using spinlock to protect  interrupt flag

Using spinlock to protect interrupt flag in critical section.

Change-Id: Ia9cf2ba638763bb1a87954deefe8a65083058439
Signed-off-by: Yan Zhang <zhangy26@motorola.com>
Reviewed-on: https://gerrit.mot.com/1357136
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Xiangpo Zhao <zhaoxp3@motorola.com>
Submit-Approved: Jira Key

Extcon:Don't report lineout device if mic detected

We see some case device with mic reported high
impedance, and reported as un-expected lineout.

Change-Id: Ic3b16a245b2ca411bcfe277f76ca86d3a680067f
Signed-off-by: yaozm1 <yaozm1@mt.com>
Reviewed-on: https://gerrit.mot.com/1355467
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Xiangpo Zhao <zhaoxp3@motorola.com>
Submit-Approved: Jira Key

ext_config:Enable USB_RTL8152

Add support for RTL8152
For USB ethernet dongle

Change-Id: I9db4f572178a9115bbecc4bb0ee24fa8597a8483
Signed-off-by: a17671 <a17671@motorola.com>
Reviewed-on: https://gerrit.mot.com/1353791
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Xiangpo Zhao <zhaoxp3@motorola.com>
Submit-Approved: Jira Key

ASoC: cs47l35: use dsp running flag for dsp status

instead of checking DSP memory address for DSP core status,
check the flag from wm_adsp to determine algorithm status.

Change-Id: I846afc671e708dedd9af52000a7eb76cc39adc3b
Signed-off-by: Yoon (Seungyoon) Lee <w22905@motorola.com>
Reviewed-on: https://gerrit.mot.com/1346616
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Zhengming Yao <yaozm1@mt.com>
Reviewed-by: Xiangpo Zhao <zhaoxp3@motorola.com>
Submit-Approved: Jira Key

scsc: limit 2.4G ACS on channels 1~11

Samsung implemented 2.4G ACS among all region allowed
channels, while Moto requires 2.4G MHS should only be
setup on channels 1~11.

Change-Id: Ibecfc178488768ae3f03ba44519088c39094662a
Signed-off-by: sunyue5 <sunyue5@motorola.com>
Reviewed-on: https://gerrit.mot.com/1348019
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Xiangpo Zhao <zhaoxp3@motorola.com>
Submit-Approved: Jira Key

fix rebase0430 build error

Change-Id: I6b34fce60010a43414ebef9351ae22faa512370d

dts:change charGing current at Troika

Change charGing current
at Troika

Change-Id: I875e778fdff4e8c306242bbb8815ceddd977de8c
Signed-off-by: xuwei9 <xuwei9@mt.com>
Reviewed-on: https://gerrit.mot.com/1346217
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Xiangpo Zhao <zhaoxp3@motorola.com>
Submit-Approved: Jira Key

Troika : vib update voltage

per key part, the vib voltage need update
kane need not

Change-Id: I344768b4866a5cd00d393e0035116eef9aa17f84
Signed-off-by: dengwei1 <dengwei1@motorola.com>
Reviewed-on: https://gerrit.mot.com/1343790
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Hua Tan <tanhua1@motorola.com>
Submit-Approved: Jira Key

kernel:Troika  do not support turbo charger rate

Troika  do not support
turbo charger rate

Change-Id: I77671320b8b30c36285d7448d0f2bc21539477c0
Signed-off-by: xuwei9 <xuwei9@mt.com>
Reviewed-on: https://gerrit.mot.com/1342646
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Xiangpo Zhao <zhaoxp3@motorola.com>
Submit-Approved: Jira Key

kernel:Troika  remove small charger

Troika  remove small
charger

Change-Id: Ib28693ebc3e6bfbd08c4917915a18b3d0ff0c3a7
Signed-off-by: xuwei9 <xuwei9@mt.com>
Reviewed-on: https://gerrit.mot.com/1342502
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Xiangpo Zhao <zhaoxp3@motorola.com>
Submit-Approved: Jira Key

config:Troika  remove small charger

Remove small charger
at Troika

Change-Id: I66affccea04982c737db548b4d5f7131b1e010ca
Signed-off-by: xuwei9 <xuwei9@mt.com>
Reviewed-on: https://gerrit.mot.com/1342501
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Xiangpo Zhao <zhaoxp3@motorola.com>
Submit-Approved: Jira Key

[COMMON] fimc-is2: do not use fast AF trigger when Precapture trigger

 PR JIRA ID: CPR-990

CRs-fixed: (CR)

Change-Id: Idb6311be87729c3e2119199e4047124a6733e9b8
Signed-off-by: Wooyeon Kim <wooy88.kim@samsung.com>
Reviewed-on: https://gerrit.mot.com/1342458
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Dawei Wang <wangdw10@motorola.com>
Reviewed-by: Biming Li <libm1@motorola.com>
Reviewed-by: Zhichao Chen <chenzc2@motorola.com>
Submit-Approved: Jira Key

kernel:Troika  battery profile update

Troika  battery profile update
for local buy battery

Change-Id: I13ad4fe4471814c79645eeeb6d3842814d2b3ea6
Signed-off-by: xuwei9 <xuwei9@mt.com>
Reviewed-on: https://gerrit.mot.com/1341251
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Xiangpo Zhao <zhaoxp3@motorola.com>
Submit-Approved: Jira Key

dts:Troika  battery profile update

Troika  battery profile update
for local buy battery

Change-Id: I8b87b03637690a2837c75e641b18bf0f9ed509b5
Signed-off-by: xuwei9 <xuwei9@mt.com>
Reviewed-on: https://gerrit.mot.com/1341262
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Xiangpo Zhao <zhaoxp3@motorola.com>
Submit-Approved: Jira Key

power: use orderly shutdown

User an orderly shutdown for factory kill instead of a
kernel power off.  The orderly shutdown will attempt to
call the reboot binary from userspace first, and then
fallback to kernel power off if it fails.

Change-Id: Ia05f1c9e1ca25b403a4c5507da2d61d267e67Defender
Signed-off-by: zhaoxp3 <zhaoxp3@motorola.com>
Reviewed-on: https://gerrit.mot.com/1339132
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Wei Xu <xuwei9@mt.com>
Submit-Approved: Jira Key

Defenderconfig: disable console driver for user build

disable serial console for user build
Change-Id: I3a5dcc3163beece8c76a0855370b5efbe0112e50
Signed-off-by: zhaoxp3 <zhaoxp3@motorola.com>
Reviewed-on: https://gerrit.mot.com/1338193
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Hua Tan <tanhua1@motorola.com>
Submit-Approved: Jira Key

Optimize the scanning interval of schedule scan

The peak of current is 80mA for schedule scan. In the past, the
interval of schedule scan is 20s, it would increase the average
current by 20mA.

This change is to optimize the scanning interval so that the
average current can be reduced to less than 1mA
Min_Period: 48s
Max_Period: 500s
Exponent: 10
Step count: 7

48s, 48s, 48s, 48s, 48s, 48s, 48s, 480s,..., 480s, ...

Change-Id: Ie0535267e531fc84ce49f9130774b1c575081a1d
Signed-off-by: sunyue5 <sunyue5@motorola.com>
Reviewed-on: https://gerrit.mot.com/1337433
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Hua Tan <tanhua1@motorola.com>
Submit-Approved: Jira Key

[COMMON][9610] drivers : fix typec role swap

Fix Macbook pro role swap issue
Add data swap and power swap
Mot-CRs-fixed:(CR)

Change-Id: I5a239b7552f4c3bb464f72d5f9f5aaae9f76ef66
Signed-off-by: Junhan Bae <junhan84.bae@samsung.com>
Reviewed-on: https://gerrit.mot.com/1337168
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Xiangpo Zhao <zhaoxp3@motorola.com>
Submit-Approved: Jira Key

arm/dts/:Add separated music bin for India sku

Add separated music bin for India sku

Change-Id: I201b951d672d72f9641083cd543b55131bc40c6e
Signed-off-by: yaozm1 <yaozm1@mt.com>
Reviewed-on: https://gerrit.mot.com/1336699
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Xiangpo Zhao <zhaoxp3@motorola.com>
Submit-Approved: Jira Key

drivers: modify the reboot reason for post-xxx

Change-Id: I0131a118df41a5910d4086059204d22899f5efbc
Signed-off-by: luodw1 <luodw1@motorola.com>
Reviewed-on: https://gerrit.mot.com/1336274
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Xiangpo Zhao <zhaoxp3@motorola.com>
Submit-Approved: Jira Key

Revert "(CR):soc:exynos-reboot:Add the last powerup reason back"

This reverts commit 0f151cacb31d8913e85a7a9a977893c5b96bb16a.

Change-Id: I5c6e689da8a51c94e71a591d263fc13295388129
Reviewed-on: https://gerrit.mot.com/1336273
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Xiangpo Zhao <zhaoxp3@motorola.com>
Submit-Approved: Jira Key

[arm64/dts]:camera: Troika : modify DVFS level for front camera video and preview

related to cts test:android.hardware.camera2.cts.RecordingTest#testSupportedVideoSizes

CRs-fixed: (CR)

Change-Id: I8964bff6d5429333baea8d3fea82c12bfafc99f0
Signed-off-by: qings.zhou <qings.zhou@samsung.com>
Reviewed-on: https://gerrit.mot.com/1335479
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Zhichao Chen <chenzc2@motorola.com>
Submit-Approved: Jira Key

kernel:report cable attch event three thime

samsung report cable attach event three times
which result in battery status override

Change-Id: I6ae9dd37d369254d15b1d5678dcb1a0d79dcb8a7
Signed-off-by: xuwei9 <xuwei9@mt.com>
Reviewed-on: https://gerrit.mot.com/1334878
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Zonghua Liu <a17671@motorola.com>
Reviewed-by: Hua Tan <tanhua1@motorola.com>
Submit-Approved: Jira Key

[Kane]FPS:Add wake lock when transfer data to TA

Fingerprint transfer data is interrupted by system suspend, so
CA can't get response from TA. Then system server watchdog happen.
To avoid the system sleep, add wake lock when transfer data from
CA to TA.

Change-Id: I627c04d63b324b1c6e7283e455efe2e78cf67319
Signed-off-by: chenl18 <chenlei18@mt.com>
Reviewed-on: https://gerrit.mot.com/1332303
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Xiangpo Zhao <zhaoxp3@motorola.com>
Submit-Approved: Jira Key

kernel:PD thermal trigger mechanism

Enable PD charger thermal
trigger mechanism

Change-Id: I7a7b4aef39a9ca2cf9164cc8431e97b770b470c8
Signed-off-by: xuwei9 <xuwei9@mt.com>
Reviewed-on: https://gerrit.mot.com/1331849
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Xiangpo Zhao <zhaoxp3@motorola.com>
Submit-Approved: Jira Key

arm64/dts: camera: Troika : add flash for OV16885

CRs-fixed: (CR)

Change-Id: Ia880ba9f0374e825c49e7e16e31a8b598613d85a
Signed-off-by: xff <fangfang.xu@samsung.com>
Reviewed-on: https://gerrit.mot.com/1330394
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Dawei Wang <wangdw10@motorola.com>
Reviewed-by: Xiangpo Zhao <zhaoxp3@motorola.com>
Submit-Approved: Jira Key

  drivers : add test patch for otg connection

Change-Id: Iea4a6a4261bcc6c134b31f4d623dc592d34e39cc

kernel: change the charger full condition with tolerance

change the charger full condition
with tolerance

Change-Id: Ia544309b142b9fc6e879c7f40701c2d303700e3d
Signed-off-by: xuwei9 <xuwei9@mt.com>
Reviewed-on: https://gerrit.mot.com/1329520
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Xiangpo Zhao <zhaoxp3@motorola.com>
Submit-Approved: Jira Key

arm64/dts: camera: Troika : set rear Defenderault multi_ch to 2 and modify fimc_is_sensor2 to use dma3 ch

- related to cts test: android.hardware.camera2.cts.MultiViewTest#testDualCameraPreview

CRs-fixed: (CR)

Change-Id: Iea578f52632ffebc284bbbda503c2ed58f7a44dc
Signed-off-by: xff <fangfang.xu@samsung.com>
Reviewed-on: https://gerrit.mot.com/1329503
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Dawei Wang <wangdw10@motorola.com>
Reviewed-by: Zhichao Chen <chenzc2@motorola.com>
Submit-Approved: Jira Key

arm64/dts: camera: Troika : modify DVFS level for front camera video

related to cts test:android.hardware.camera2.cts.RecordingTest#testSupportedVideoSizes

CRs-fixed: (CR)

Change-Id: I7605e2fbfc7b274d8793221487b105de8e14f37c
Signed-off-by: xff <fangfang.xu@samsung.com>
Reviewed-on: https://gerrit.mot.com/1329502
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Dawei Wang <wangdw10@motorola.com>
Reviewed-by: Zhichao Chen <chenzc2@motorola.com>
Submit-Approved: Jira Key

kernel:fs:update inode size when do lseek

sdcardfs file node info was not updated when lowlevel file was updated
force to update the inode size when do lseek systemcall

Change-Id: I34802cc33f5cddd9dd8d304c5803cd0886805faf
Signed-off-by: wangwang <wangwang1@mt.com>
Reviewed-on: https://gerrit.mot.com/1328861
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Xiangpo Zhao <zhaoxp3@motorola.com>
Submit-Approved: Jira Key

Defenderconfig:Troika : add config for Set BUCK8 voltage to1.35V

Merge samsung patch:
[MODAP-23773][Troika ][regulator] Set BUCK8 output voltage to 1.35V.
Signed-off-by: yujing <jing12.yu@samsung.com>
Change-Id: If688ef59d1501635b12e584f1cac6fd3dac37bc7
Signed-off-by: Wen Xie <xiewen3@motorola.com>
Reviewed-on: https://gerrit.mot.com/1327859
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Zhengming Yao <yaozm1@mt.com>
Reviewed-by: Xiangpo Zhao <zhaoxp3@motorola.com>
Submit-Approved: Lu Lu <lulu2@mt.com>

regulator: Troika ：Set BUCK8 output voltage to 1.35V

Merge samsung patch:
[MODAP-23773][Troika ][regulator] Set BUCK8 output voltage to 1.35V.
Signed-off-by: yujing <jing12.yu@samsung.com>
Change-Id: Ic609cdf471fd23ad199eabdaec364826fbea30cd
Signed-off-by: Wen Xie <xiewen3@motorola.com>
Reviewed-on: https://gerrit.mot.com/1327857
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Zhengming Yao <yaozm1@mt.com>
Reviewed-by: Xiangpo Zhao <zhaoxp3@motorola.com>
Submit-Approved: Lu Lu <lulu2@mt.com>

Audio:Re-apply Cirrus' patch for hp detect

Force EP demux over to headphones to run HPDET
Add invert logic clamp.
Set clamp Defenderault value to true.

Change-Id: Ib4202e2d226e5585506acdf114c3056b60ab8d2b
Signed-off-by: yaozm1 <yaozm1@mt.com>
Reviewed-on: https://gerrit.mot.com/1326172
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Xiangpo Zhao <zhaoxp3@motorola.com>
Submit-Approved: Jira Key

Audio:Remove cirrus patch

Revert "(CR):Asoc:Apply cirrus' patch to fix hp detect issue"

This reverts commit 2ffd055d897360e03c7446ad5b33ab747b6bdba0.

Change-Id: Iff805d831d969ad408d597ad36a2672dd57c91b4
Reviewed-on: https://gerrit.mot.com/1325465
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Xiangpo Zhao <zhaoxp3@motorola.com>
Submit-Approved: Jira Key

Asoc:Apply cirrus' patch to fix hp detect issue

From: Charles Keepax <ckeepax@opensource.cirrus.com>
Date: Tue, 19 Mar 2019 17:29:02 +0000
Subject: [PATCH] ASoC: madera: Force EP demux over to headphones to run HPDET

The EP demux needs to be set to the headphones for the HPDET to run the
correct value.

Change-Id: I7bcc0cdca28b2a1b3144ee03f3af84056ddcaba4
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: yaozm1 <yaozm1@mt.com>
Change-Id: I24c057510dfff3b531cd75e3c8aafa255727e87e
Reviewed-on: https://gerrit.mot.com/1324759
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Xiangpo Zhao <zhaoxp3@motorola.com>
Submit-Approved: Jira Key

lcd: modify lcd init code for lcd internal power jump

Change-Id: If3bb2f7873762bb2d51b9cef8cca5057611dd94b
Signed-off-by: xingbin <xingbin@huaqin.com>
Signed-off-by: tanhua1 <tanhua1@mt.com>
Reviewed-on: https://gerrit.mot.com/1323561
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Xiangpo Zhao <zhaoxp3@motorola.com>
Submit-Approved: Jira Key

lcd: modify lcd init code for lcd internal power jump

modify himax lcd init code for lcd internal power jump
Note:current stage solution, maybe update the final solution later

Change-Id: I22e036b0145aefb7057a7e44dac7292037fa19d8
Signed-off-by: xingbin <xingbin@huaqin.com>
Signed-off-by: tanhua1 <tanhua1@mt.com>
Reviewed-on: https://gerrit.mot.com/1323560
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Xiangpo Zhao <zhaoxp3@motorola.com>
Submit-Approved: Jira Key

sensor: adjust the log

Adjust the log reg:
X933X_REG_PROX_ADC_MIN->X933X_REG_PROX_ADC_MAX.

Change-Id: I794b57a066ab481d18952d4eb27c08d7067dae17
Signed-off-by: Wen Xie <xiewen3@motorola.com>
Reviewed-on: https://gerrit.mot.com/1322655
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Xiangpo Zhao <zhaoxp3@motorola.com>
Submit-Approved: Jira Key

arm64/dts: Update Capsensor parameters

form vendor:
Add Troika  Capsensor parameters.

Change-Id: Ia361da98298bfc78b61adf10c4498fa7afc08528
Signed-off-by: Wen Xie <xiewen3@motorola.com>
Reviewed-on: https://gerrit.mot.com/1322653
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Xiangpo Zhao <zhaoxp3@motorola.com>
Submit-Approved: Jira Key

lowmemorykiller:Account for extra_free_kbytes in calcuations

Account for extra_free_kbytes in calcuations

CRs-fixed: (CR)
Signed-off-by: Jeff Vanhoof <qjv001@motorola.com>
Change-Id: I2c44a1775d43fad40cf49d6303b7552c2c089b6e
Reviewed-on: https://gerrit.mot.com/1076213
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Coverity Analysis <coverity@motorola.com>
Reviewed-by: Igor Kovalenko <igork@motorola.com>
Submit-Approved: Jira Key
Reviewed-on: https://gerrit.mot.com/1318719
Reviewed-by: Dawei Wang <wangdw10@motorola.com>
Reviewed-by: Zhichao Chen <chenzc2@motorola.com>

[COMMON] fimc-s2: modify hw sync registers of OV12A10

CRs-fixed: (CR)

Change-Id: I1168adc20f4aecb37ba1b278be8cb8a085b4461c
Signed-off-by: xff <fangfang.xu@samsung.com>
Reviewed-on: https://gerrit.mot.com/1321973
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Dawei Wang <wangdw10@motorola.com>
Reviewed-by: Zhichao Chen <chenzc2@motorola.com>
Submit-Approved: Jira Key

arm64/dts: camera: Troika : add i2c mode for front camera

CRs-fixed: (CR)

Change-Id: I9811e8526daf06f609166c04f68b29889247df80
Signed-off-by: xff <fangfang.xu@samsung.com>
Reviewed-on: https://gerrit.mot.com/1321972
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Dawei Wang <wangdw10@motorola.com>
Reviewed-by: Zhichao Chen <chenzc2@motorola.com>
Submit-Approved: Jira Key

kernel: charger thermal level log

charger thermal current
level log

Change-Id: If932cb55f304a5903121ed283503ec10d3c16fc7
Signed-off-by: xuwei9 <xuwei9@mt.com>
Reviewed-on: https://gerrit.mot.com/1322036
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Xiangpo Zhao <zhaoxp3@motorola.com>
Submit-Approved: Jira Key

wlbt: Disable SMAPPER in SISO phone

Disable SMAPPEr in SISO phones as it is not required and it
could cause ITMON issues.

Moto-CRs-Fixed: (CR)
SCSC-Bug-Id: SMAPPER_DISABLED

Change-Id: If4da74599bf0235185c62ade6e074e23de46f662
Signed-off-by: Albert Cano <a.canocamps@samsung.com>
Signed-off-by: sunyue5 <sunyue5@motorola.com>
Reviewed-on: https://gerrit.mot.com/1321241
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Jun Zhang <zhangj10@motorola.com>
Reviewed-by: Xiangpo Zhao <zhaoxp3@motorola.com>
Submit-Approved: Jira Key

sensor: adjust the log

1. adjust the log format
2. add log to dump adc, raw data and use filter

Change-Id: I518a116e834a82fb721746ce546fe60b438bfb4f
Signed-off-by: Wen Xie <xiewen3@motorola.com>
Reviewed-on: https://gerrit.mot.com/1320612
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Xiangpo Zhao <zhaoxp3@motorola.com>
Submit-Approved: Jira Key

kernel:turbo charger event of type-c

turbo charger type-c
event

Change-Id: I302816f48b55abe87a7fb69a1dfb9041ea9957c9
Signed-off-by: xuwei9 <xuwei9@mt.com>
Reviewed-on: https://gerrit.mot.com/1320067
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Xiangpo Zhao <zhaoxp3@motorola.com>
Submit-Approved: Jira Key

driver:Add C type Rp current setting

Add c type Rp current
setting

Signed-off-by: xuwei9 <xuwei9@mt.com>
Change-Id: I222c07f0fdd29f65c6a5311Defenderc33e3c5c30c4cf
Reviewed-on: https://gerrit.mot.com/1320518
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Wei Xu <xuwei9@mt.com>
Reviewed-by: Xiangpo Zhao <zhaoxp3@motorola.com>
Submit-Approved: Jira Key

kernel:battery full to 99 fast

battery full to 99
fast

Change-Id: I048846a2769b0af49067a599f556b1b8bcea2a6f
Signed-off-by: xuwei9 <xuwei9@mt.com>
Reviewed-on: https://gerrit.mot.com/1320018
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Xiangpo Zhao <zhaoxp3@motorola.com>
Submit-Approved: Jira Key

[LV][RAMEN9610-12699][Robusta2] arm64: dts: Set pull up/down disable at  SD_SIM_DET pin.

When use active high detect case that sometimes have problem SIM detect floating issue.
So, Change pull up/down state from down to disable.

Moto-CRs-Fixed: (CR)
Change-Id: I3161fdfc5ccec17e9f20991c9c5fa9724fcf2593
Signed-off-by: JaeHun Jung <jh0801.jung@samsung.com>
Reviewed-on: https://gerrit.mot.com/1320002
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Junfang Zhang <zhang10@motorola.com>
Tested-by: Junfang Zhang <zhang10@motorola.com>
Submit-Approved: Jira Key

arm64/dts: Update Capsensor parameters

8024--RegAfeParamsPh0--FREQ_PH0=b11011: b10001: FOsc/88 (~45.45 kHz)
802C--RegAfeParamsPh1--FREQ_PH1=b11011: b10001: FOsc/88 (~45.45 kHz)

Change-Id: I24ca9b0627166d4e68e851c808c4d4e4d9a956a2
Signed-off-by: Wen Xie <xiewen3@motorola.com>
Reviewed-on: https://gerrit.mot.com/1319622
Tested-by: Jira Key
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Reviewed-by: Xiangpo Zhao <zhaoxp3@motorola.com>
Submit-Approved: Jira Key