Ben Skeggs [Tue, 2 Aug 2011 03:57:10 +0000 (13:57 +1000)]
drm/nouveau: tidy connector hotplug handler, punt messages to debug
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Fri, 1 Jul 2011 05:51:49 +0000 (15:51 +1000)]
drm/nouveau/dp: remove reliance on vbios for native displayport
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Wed, 20 Jul 2011 05:50:14 +0000 (15:50 +1000)]
drm/nouveau/dp: rewrite auxch transaction routines
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Mon, 25 Jul 2011 10:26:19 +0000 (20:26 +1000)]
drm/nouveau: workaround semaphore hw bug causing unnecessary interrupts
The HW will only accept the DMA_FROM_MEMORY class for DMA_SEMAPHORE without
asking the driver to intervene.
It appears that semaphores will work correctly even without DMA_IN_MEMORY,
so lets avoid the large amount of interrupts generated by x-chan sync.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Thu, 21 Jul 2011 06:12:58 +0000 (16:12 +1000)]
drm/nouveau/tmr: fix miscalculation of ratio on pre-nv4x chipsets
The clock_get() hook returns KHz, not Hz.
Also fixed to use crystal freq from dev_priv.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Thu, 21 Jul 2011 05:54:48 +0000 (15:54 +1000)]
drm/nva3/pm: fixup for NVAF special
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Thu, 21 Jul 2011 05:52:52 +0000 (15:52 +1000)]
drm/nva3/pm: use crystal freq where appropriate
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Thu, 21 Jul 2011 05:39:06 +0000 (15:39 +1000)]
drm/nouveau: determine timing crystal freq from straps
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Tue, 19 Jul 2011 23:59:05 +0000 (09:59 +1000)]
drm/nva3/pm: pll disabled if bit 0 of ctrl not set
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Tue, 19 Jul 2011 05:59:39 +0000 (15:59 +1000)]
drm/nouveau: magic to make auxch on new macbooks booted in EFI mode work
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Roy Spliet [Thu, 14 Jul 2011 18:40:10 +0000 (20:40 +0200)]
drm/nouveau/pm: Document and expose CL and WR for 0x1002Cx
Signed-off-by: Roy Spliet <r.spliet@student.tudelft.nl>
Roy Spliet [Sat, 9 Jul 2011 19:18:11 +0000 (21:18 +0200)]
drm/nouveau/pm: add initial NV3x/NVCx memtiming support, improve other cards
NV30: Create framework for memtm
NV50: Improve reg creation,
NV50: Use P.version instead of card codename/stepping,
NVC0: Initial memtiming code for Fermi,
Renamed regs for consistency,
Overall redesign to improve readability,
Avoid kfree on null-pointer
Signed-off-by: Roy Spliet <r.spliet@student.tudelft.nl>
Ben Skeggs [Wed, 13 Jul 2011 06:15:57 +0000 (16:15 +1000)]
drm/nouveau: remove special-casing of hotplug detection type
If we support PGPIO interrupts, and know a hotplug GPIO tag for a
connector we use HPD, otherwise POLL_CONNECT.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Tue, 12 Jul 2011 02:06:36 +0000 (12:06 +1000)]
drm/nvd0: no page flipping at the moment
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Mon, 11 Jul 2011 05:54:20 +0000 (15:54 +1000)]
drm/nvc0/gr: remove max tpc count info
Just assume a max of 16 everywhere, and hope it's okay.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Mon, 11 Jul 2011 05:46:01 +0000 (15:46 +1000)]
drm/nvd0: lets not attempt to dereference a nv50_display pointer
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ken Milmore [Sun, 3 Jul 2011 18:54:28 +0000 (19:54 +0100)]
drm/nouveau: enable hwmon support when both nouveau/hwmon are built as modules.
The nouveau hwmon temperature support currently only functions when hwmon is
compiled into the kernel. There's no reason why this shouldn't also work when
both hwmon and nouveau are modularised (as is the case with Slackware's stock
kernels).
Signed-off-by: Ken Milmore <ken.milmore@googlemail.com>
Reviewed-by: Martin Peres <martin.peres@ensi-bourges.fr>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Fri, 8 Jul 2011 04:43:19 +0000 (14:43 +1000)]
drm/nvd0/disp: tidy up what we have so far
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Fri, 8 Jul 2011 04:34:45 +0000 (14:34 +1000)]
drm/nvd0/disp: rewrite irq handler, should be somewhat sturdier now
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Fri, 8 Jul 2011 03:17:01 +0000 (13:17 +1000)]
drm/nvd0/disp: do modeset irq handling from tasklet
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Fri, 8 Jul 2011 02:52:14 +0000 (12:52 +1000)]
drm/nvd0/disp: untested LVDS support
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Fri, 8 Jul 2011 02:11:58 +0000 (12:11 +1000)]
drm/nvd0/disp: track down fb positioning method
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Fri, 8 Jul 2011 01:53:37 +0000 (11:53 +1000)]
drm/nvd0/disp: determine U table config in or_mode_set()
Takes a gamble and presumes that we can safely store something random in
OR_MODE_CTRL+4, the hw doesn't seem to mind...
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Fri, 8 Jul 2011 01:14:50 +0000 (11:14 +1000)]
drm/nvd0/disp: dac load detect
VBIOS does more than this, as does nv50/nvc0 driver in nouveau. Traces
of the NVIDIA binary driver however, show pretty much just this being
done... Seems to work for me, it'll be fine for the moment.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Thu, 7 Jul 2011 23:43:20 +0000 (09:43 +1000)]
drm/nvd0/disp: handle sync polarity, kill off some unknown
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Thu, 7 Jul 2011 06:01:57 +0000 (16:01 +1000)]
drm/nvd0/disp: scaling
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Thu, 7 Jul 2011 05:23:48 +0000 (15:23 +1000)]
drm/nvd0/disp: push the update button in mode_set_base()
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Thu, 7 Jul 2011 04:49:24 +0000 (14:49 +1000)]
drm/nvd0/disp: fixup clut so it actually works
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Thu, 7 Jul 2011 00:47:10 +0000 (10:47 +1000)]
drm/nvd0/disp: initial attempt at modeset irq handling
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Wed, 6 Jul 2011 23:51:29 +0000 (09:51 +1000)]
drm/nvd0/disp: stub dac load detect, prevents oops
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Wed, 6 Jul 2011 05:25:47 +0000 (15:25 +1000)]
drm/nvd0/disp: dac encoder module
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Wed, 6 Jul 2011 04:39:23 +0000 (14:39 +1000)]
drm/nvd0/disp: extend the init voodoo to cover crtcs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Wed, 6 Jul 2011 01:40:45 +0000 (11:40 +1000)]
drm/nvd0/disp: remove lp reordering from vram dmaobj, create fb dmaobjs
Fixes CLUT being messed up. Mostly.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Wed, 6 Jul 2011 00:29:49 +0000 (10:29 +1000)]
drm/nvd0/disp: some magic to make evo happeir
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Tue, 5 Jul 2011 23:59:40 +0000 (09:59 +1000)]
drm/nvd0/disp: they moved the linear flag..
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Tue, 5 Jul 2011 06:48:06 +0000 (16:48 +1000)]
drm/nvd0/disp: initial crtc object implementation
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Tue, 5 Jul 2011 04:16:05 +0000 (14:16 +1000)]
drm/nvd0/disp: skeletal handling of modeset interrupts
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Tue, 5 Jul 2011 03:08:40 +0000 (13:08 +1000)]
drm/nvd0/disp: start on SOR encoder functions
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Tue, 5 Jul 2011 01:58:58 +0000 (11:58 +1000)]
drm/nvd0/disp: setup a couple of dma objects we'll need
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Tue, 5 Jul 2011 01:01:13 +0000 (11:01 +1000)]
drm/nvd0/disp: start on interrupt handling
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Tue, 5 Jul 2011 00:33:08 +0000 (10:33 +1000)]
drm/nvd0/disp: whip up some basic dma handling for the evo channels
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Mon, 4 Jul 2011 06:25:18 +0000 (16:25 +1000)]
drm/nvd0/disp: very initial evo setup
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Wed, 6 Jul 2011 11:21:42 +0000 (21:21 +1000)]
drm/nouveau/bios: allow passing in crtc to the init table parser
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Mon, 4 Jul 2011 04:06:07 +0000 (14:06 +1000)]
drm/nvd0/pm: enable clock/voltage hooks
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Sun, 3 Jul 2011 03:40:01 +0000 (13:40 +1000)]
drm/nouveau/bios: fix INIT_GPIO for new chipsets
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Sat, 2 Jul 2011 16:57:35 +0000 (02:57 +1000)]
drm/nvd0/gpio: initial implementation
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Sat, 2 Jul 2011 10:43:42 +0000 (20:43 +1000)]
drm/nvd0/i2c: initial implementation
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Mon, 4 Jul 2011 03:25:17 +0000 (13:25 +1000)]
drm/nouveau: initial chipset description for nvdX chipsets
All the non-stubbed functions should be okay for this chipset, the rest
will be added back as they're figured out.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Mon, 4 Jul 2011 03:14:05 +0000 (13:14 +1000)]
drm/nouveau: allow modeset module option to select 'headless mode'
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Mon, 4 Jul 2011 01:55:39 +0000 (11:55 +1000)]
drm/nouveau: fixup init/fini sequence to deal with no CRTCs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Mon, 4 Jul 2011 00:47:19 +0000 (10:47 +1000)]
drm/nouveau: make general drm modesetting init common
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Sat, 2 Jul 2011 10:28:49 +0000 (20:28 +1000)]
drm/nvd0: add a card_type for 0xdX chipsets
These are different enough from 0xcX to justify it, half fermi, half
kepler(??)..
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Martin Peres [Sun, 3 Jul 2011 23:41:34 +0000 (09:41 +1000)]
drm/nv04/pm: recalibrate timer on nvclk changes
Signed-off-by: Martin Peres <martin.peres@ensi-bourges.fr>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Sun, 3 Jul 2011 11:16:12 +0000 (21:16 +1000)]
drm/nouveau/tmr: calibrate for ns timestamps on init
We previously assumed (incorrectly a lot of the time) that PTIMER would
be programmed at a frequency which'd give its 64-bit timestamps in
nanoseconds.
By programming PTIMER ourselves, we avoid this problem.
Reviewed-by: Martin Peres <martin.peres@ensi-bourges.fr>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Sat, 2 Jul 2011 04:37:36 +0000 (14:37 +1000)]
drm/nvc0/gr: unblacklist nvcf acceleration
Reported to be working.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Wed, 29 Jun 2011 00:45:07 +0000 (10:45 +1000)]
drm/nouveau: don't complain for disabled timingset entries
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Wed, 29 Jun 2011 00:42:14 +0000 (10:42 +1000)]
drm/nvc0/gr: copy GPC mpart config from PFFB
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Fri, 24 Jun 2011 02:47:46 +0000 (12:47 +1000)]
drm/nvc0/vram: support non-uniform memory size per controller
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Fri, 24 Jun 2011 01:14:00 +0000 (11:14 +1000)]
drm/nvc0/gr: add support for nvcf chipset
untested, written from a trace, accel disabled by default until it is
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Fri, 24 Jun 2011 00:23:20 +0000 (10:23 +1000)]
drm/nouveau: allow a nouveau_mm to be created with holes
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Fri, 24 Jun 2011 00:14:07 +0000 (10:14 +1000)]
drm/nouveau: embed nouveau_mm
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Thu, 23 Jun 2011 06:44:05 +0000 (16:44 +1000)]
drm/nv31/mpeg: support for a single class3174 user
Uncertain if/how the hw does multiple PMPEG channels, supporting one is
better than none however.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Thu, 23 Jun 2011 06:21:21 +0000 (16:21 +1000)]
drm/nouveau: rename nv40_mpeg to nv31_mpeg
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Tue, 21 Jun 2011 05:12:26 +0000 (15:12 +1000)]
drm/nvc0/pm: more complete parsing of clock domains
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Sat, 18 Jun 2011 15:44:36 +0000 (01:44 +1000)]
drm/nvc0/pm: initial implementation of clocks_get()
Not too certain on memory clock yet, but it gets the right numbers for
each perflvl on my NVC0.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Sat, 18 Jun 2011 06:28:00 +0000 (16:28 +1000)]
drm/nva3/pm: idle graphics engine before changing clocks
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Sat, 18 Jun 2011 06:27:24 +0000 (16:27 +1000)]
drm/nouveau: add function to wait until a callback returns true
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Sat, 18 Jun 2011 06:08:22 +0000 (16:08 +1000)]
drm/nv50/gr: insert set/clr of a ctxprog flag at start/end of ctxprog
The set will be replaced with a wait on the same flag by a subsequent
commit in order to halt a ctxprog's execution temporarily.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Fri, 17 Jun 2011 06:33:13 +0000 (16:33 +1000)]
drm/nva3/pm: tidy and add some comments here and there
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Fri, 17 Jun 2011 06:11:31 +0000 (16:11 +1000)]
drm/nva3/pm: parse/reclock vdec/41a0 clocks
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Fri, 17 Jun 2011 05:38:48 +0000 (15:38 +1000)]
drm/nva3/pm: rewrite clock_set, and switch to new interfaces
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Fri, 17 Jun 2011 01:25:57 +0000 (11:25 +1000)]
drm/nouveau/pm: add hooks to get/set *all* clocks at once
This is probably better than having to tell the common code about all the
clocks that exist on every chipset.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Fri, 17 Jun 2011 01:09:40 +0000 (11:09 +1000)]
drm/nva3/pm: rewrite clock readback functions, far more correct now
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Fri, 10 Jun 2011 05:33:11 +0000 (15:33 +1000)]
drm/nouveau/pm: some fermi chipsets still use volt 0x30
Fun, fun.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Fri, 10 Jun 2011 02:07:09 +0000 (12:07 +1000)]
drm/nouveau/pm: allow voltage-only perflvl set, enable nvc0
Okay, my card didn't blow up. Lets turn it on!
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Thu, 9 Jun 2011 07:34:02 +0000 (17:34 +1000)]
drm/nvc0/pm: enable voltage_get
I don't have a terribly good reason for not enabling voltage_set too, but,
lets wait and see.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Thu, 9 Jun 2011 07:27:47 +0000 (17:27 +1000)]
drm/nouveau/pm: show any info we can manage to glean on current perflvl
Previously wouldn't show detected voltage if we couldn't figure out the
clock frequencies..
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Thu, 9 Jun 2011 06:57:07 +0000 (16:57 +1000)]
drm/nouveau/pm: add support for parsing perflvl voltage on fermi chips
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Thu, 9 Jun 2011 06:17:48 +0000 (16:17 +1000)]
drm/nouveau/pm: add yet another vid gpio tag
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Thu, 9 Jun 2011 06:16:38 +0000 (16:16 +1000)]
drm/nouveau/pm: initial attempt at parsing volt 0x40
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Thu, 9 Jun 2011 03:45:31 +0000 (13:45 +1000)]
drm/nouveau/pm: store voltage in microvolts
Instead of 10s of millivolts, to match fermi vbios.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Linus Torvalds [Mon, 12 Sep 2011 21:02:02 +0000 (14:02 -0700)]
Linux 3.1-rc6
Linus Torvalds [Mon, 12 Sep 2011 20:49:07 +0000 (13:49 -0700)]
Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
drm: Remove duplicate "return" statement
drm/nv04/crtc: Bail out if FB is not bound to crtc
drm/nouveau: fix nv04_sgdma_bind on non-"4kB pages" archs
drm/nouveau: properly handle allocation failure in nouveau_sgdma_populate
drm/nouveau: fix oops on pre-semaphore hardware
drm/nv50/crtc: Bail out if FB is not bound to crtc
drm/radeon/kms: fix DP detect and EDID fetch for DP bridges
Linus Torvalds [Mon, 12 Sep 2011 18:51:35 +0000 (11:51 -0700)]
Merge branch 'fixes' of git://git.linaro.org/people/arnd/arm-soc
* 'fixes' of git://git.linaro.org/people/arnd/arm-soc:
ARM: CSR: add missing sentinels to of_device_id tables
ARM: cns3xxx: Fix newly introduced warnings in the PCIe code
ARM: cns3xxx: Fix compile error caused by hardware.h removed
ARM: davinci: fix cache flush build error
ARM: davinci: correct MDSTAT_STATE_MASK
ARM: davinci: da850 EVM: read mac address from SPI flash
OMAP: omap_device: fix !CONFIG_SUSPEND case in _noirq handlers
OMAP2430: hwmod: musb: add missing terminator to omap2430_usbhsotg_addrs[]
OMAP3: clock: indicate that gpt12_fck and wdt1_fck are in the WKUP clockdomain
OMAP4: clock: fix compile warning
OMAP4: clock: re-enable previous clockdomain enable/disable sequence
OMAP: clockdomain: Wait for powerdomain to be ON when using clockdomain force wakeup
OMAP: powerdomains: Make all powerdomain target states as ON at init
Mathieu Desnoyers [Sun, 11 Sep 2011 21:59:04 +0000 (17:59 -0400)]
ioctl: register LTTng ioctl
The LTTng 2.0 kernel tracer (stand-alone module package, available at
http://lttng.org) uses the 0xF6 ioctl range for tracer control and
transport operations.
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Mon, 12 Sep 2011 18:47:49 +0000 (11:47 -0700)]
Merge branch 'for-linus' of git://github.com/chrismason/linux
* 'for-linus' of git://github.com/chrismason/linux:
Btrfs: add dummy extent if dst offset excceeds file end in
Btrfs: calc file extent num_bytes correctly in file clone
btrfs: xattr: fix attribute removal
Btrfs: fix wrong nbytes information of the inode
Btrfs: fix the file extent gap when doing direct IO
Btrfs: fix unclosed transaction handle in btrfs_cont_expand
Btrfs: fix misuse of trans block rsv
Btrfs: reset to appropriate block rsv after orphan operations
Btrfs: skip locking if searching the commit root in csum lookup
btrfs: fix warning in iput for bad-inode
Btrfs: fix an oops when deleting snapshots
Miklos Szeredi [Mon, 12 Sep 2011 07:38:03 +0000 (09:38 +0200)]
fuse: fix memory leak
kmemleak is reporting that 32 bytes are being leaked by FUSE:
unreferenced object 0xe373b270 (size 32):
comm "fusermount", pid 1207, jiffies
4294707026 (age 2675.187s)
hex dump (first 32 bytes):
01 00 00 00 00 00 00 00 01 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<
b05517d7>] kmemleak_alloc+0x27/0x50
[<
b0196435>] kmem_cache_alloc+0xc5/0x180
[<
b02455be>] fuse_alloc_forget+0x1e/0x20
[<
b0245670>] fuse_alloc_inode+0xb0/0xd0
[<
b01b1a8c>] alloc_inode+0x1c/0x80
[<
b01b290f>] iget5_locked+0x8f/0x1a0
[<
b0246022>] fuse_iget+0x72/0x1a0
[<
b02461da>] fuse_get_root_inode+0x8a/0x90
[<
b02465cf>] fuse_fill_super+0x3ef/0x590
[<
b019e56f>] mount_nodev+0x3f/0x90
[<
b0244e95>] fuse_mount+0x15/0x20
[<
b019d1bc>] mount_fs+0x1c/0xc0
[<
b01b5811>] vfs_kern_mount+0x41/0x90
[<
b01b5af9>] do_kern_mount+0x39/0xd0
[<
b01b7585>] do_mount+0x2e5/0x660
[<
b01b7966>] sys_mount+0x66/0xa0
This leak report is consistent and happens once per boot on
3.1.0-rc5-dirty.
This happens if a FORGET request is queued after the fuse device was
released.
Reported-by: Sitsofe Wheeler <sitsofe@yahoo.com>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Tested-by: Sitsofe Wheeler <sitsofe@yahoo.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Miklos Szeredi [Mon, 12 Sep 2011 07:31:49 +0000 (09:31 +0200)]
fuse: fix flock breakage
Commit
37fb3a30b4 ("fuse: fix flock") added in 3.1-rc4 caused flock() to
fail with ENOSYS with the kernel ABI version 7.16 or earlier.
Fix by falling back to testing FUSE_POSIX_LOCKS for ABI versions 7.16
and earlier.
Reported-by: Martin Ziegler <ziegler@email.mathematik.uni-freiburg.de>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Tested-by: Martin Ziegler <ziegler@email.mathematik.uni-freiburg.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Arnd Bergmann [Mon, 12 Sep 2011 18:30:22 +0000 (20:30 +0200)]
Merge branch 'for_3.1/pm-fixes-2' of git://gitorious.org/khilman/linux-omap-pm into fixes
Arnd Bergmann [Mon, 12 Sep 2011 14:59:37 +0000 (14:59 +0000)]
Merge branch 'sirf/fixes' into fixes
Linus Torvalds [Sun, 11 Sep 2011 21:58:47 +0000 (14:58 -0700)]
Merge branch 'v4l_for_linus' of git://linuxtv.org/mchehab/for_linus
* 'v4l_for_linus' of git://linuxtv.org/mchehab/for_linus:
[media] vp7045: fix buffer setup
[media] nuvoton-cir: simplify raw IR sample handling
[media] [Resend] viacam: Don't explode if pci_find_bus() returns NULL
[media] v4l2: Fix documentation of the codec device controls
[media] gspca - sonixj: Fix the darkness of sensor om6802 in 320x240
[media] gspca - sonixj: Fix wrong register mask for sensor om6802
[media] gspca - ov519: Fix LED inversion of some ov519 webcams
[media] pwc: precedence bug in pwc_init_controls()
Linus Torvalds [Sun, 11 Sep 2011 21:55:43 +0000 (14:55 -0700)]
Merge branch 'for-linus' of git://openrisc.net/~jonas/linux
* 'for-linus' of git://openrisc.net/~jonas/linux:
Add missing DMA ops
openrisc: don't use pt_regs in struct sigcontext
Li Zefan [Sun, 11 Sep 2011 14:52:25 +0000 (10:52 -0400)]
Btrfs: add dummy extent if dst offset excceeds file end in
You can see there's no file extent with range [0, 4096]. Check this by
btrfsck:
# btrfsck /dev/sda7
root 5 inode 258 errors 100
...
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Li Zefan [Sun, 11 Sep 2011 14:52:25 +0000 (10:52 -0400)]
Btrfs: calc file extent num_bytes correctly in file clone
num_bytes should be 4096 not 12288.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
David Sterba [Sun, 11 Sep 2011 14:52:25 +0000 (10:52 -0400)]
btrfs: xattr: fix attribute removal
An attribute is not removed by 'setfattr -x attr file' and remains
visible in attr list. This makes xfstests/062 pass again.
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Miao Xie [Sun, 11 Sep 2011 14:52:25 +0000 (10:52 -0400)]
Btrfs: fix wrong nbytes information of the inode
If we write some data into the data hole of the file(no preallocation for this
hole), Btrfs will allocate some disk space, and update nbytes of the inode, but
the other element--disk_i_size needn't be updated. At this condition, we must
update inode metadata though disk_i_size is not changed(btrfs_ordered_update_i_size()
return 1).
# mkfs.btrfs /dev/sdb1
# mount /dev/sdb1 /mnt
# touch /mnt/a
# truncate -s 856002 /mnt/a
# dd if=/dev/zero of=/mnt/a bs=4K count=1 conv=nocreat,notrunc
# umount /mnt
# btrfsck /dev/sdb1
root 5 inode 257 errors 400
found 32768 bytes used err is 1
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Miao Xie [Sun, 11 Sep 2011 14:52:24 +0000 (10:52 -0400)]
Btrfs: fix the file extent gap when doing direct IO
When we write some data to the place that is beyond the end of the file
in direct I/O mode, a data hole will be created. And Btrfs should insert
a file extent item that point to this hole into the fs tree. But unfortunately
Btrfs forgets doing it.
The following is a simple way to reproduce it:
# mkfs.btrfs /dev/sdc2
# mount /dev/sdc2 /test4
# touch /test4/a
# dd if=/dev/zero of=/test4/a seek=8 count=1 bs=4K oflag=direct conv=nocreat,notrunc
# umount /test4
# btrfsck /dev/sdc2
root 5 inode 257 errors 100
Reported-by: Tsutomu Itoh <t-itoh@jp.fujitsu.com>
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Tested-by: Tsutomu Itoh <t-itoh@jp.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Miao Xie [Sun, 11 Sep 2011 14:52:24 +0000 (10:52 -0400)]
Btrfs: fix unclosed transaction handle in btrfs_cont_expand
The function - btrfs_cont_expand() forgot to close the transaction handle before
it jump out the while loop. Fix it.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Liu Bo [Sun, 11 Sep 2011 14:52:24 +0000 (10:52 -0400)]
Btrfs: fix misuse of trans block rsv
At the beginning of create_pending_snapshot, trans->block_rsv is set
to pending->block_rsv and is used for snapshot things, however, when
it is done, we do not recover it as will.
Signed-off-by: Liu Bo <liubo2009@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Liu Bo [Sun, 11 Sep 2011 14:52:24 +0000 (10:52 -0400)]
Btrfs: reset to appropriate block rsv after orphan operations
While truncating free space cache, we forget to change trans->block_rsv
back to the original one, but leave it with the orphan_block_rsv, and
then with option inode_cache enable, it leads to countless warnings of
btrfs_alloc_free_block and btrfs_orphan_commit_root:
WARNING: at fs/btrfs/extent-tree.c:5711 btrfs_alloc_free_block+0x180/0x350 [btrfs]()
...
WARNING: at fs/btrfs/inode.c:2193 btrfs_orphan_commit_root+0xb0/0xc0 [btrfs]()
Signed-off-by: Liu Bo <liubo2009@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
projects / GitHub / mt8127 / android_kernel_alcatel_ttab.git / log