GitHub/LineageOS/G12/android_kernel_amlogic_linux-4.9.git
11 years agoiwlwifi: make TX seqno validation more efficient
Johannes Berg [Tue, 11 Jun 2013 17:05:27 +0000 (19:05 +0200)]
iwlwifi: make TX seqno validation more efficient

Accessing the device in Tx path is not a good idea.
Mirror the data in DRAM.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
11 years agoiwlwifi: mvm: Update the supported interface combinations
Ilan Peer [Sat, 1 Jun 2013 17:17:18 +0000 (20:17 +0300)]
iwlwifi: mvm: Update the supported interface combinations

iwlmvm does not support concurrent operation of AP with P2P Client/GO.
Update the interface limits to reflect that iwlmvm supports only
concurrent operation of station with AP and P2P Client/GO.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
11 years agoiwlwifi: mvm: don't set the MCAST queue in STA's queue list
Emmanuel Grumbach [Sun, 9 Jun 2013 10:00:12 +0000 (13:00 +0300)]
iwlwifi: mvm: don't set the MCAST queue in STA's queue list

The MCAST queue should be enabled after DTIM only.
According to fw API, the MCAST must not be attached to any
station, but should appear in the mcast_qid of the AP's
mac context only.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
11 years agoiwlwifi: mvm: properly tell the fw that a STA is awake
Emmanuel Grumbach [Sun, 9 Jun 2013 09:59:24 +0000 (12:59 +0300)]
iwlwifi: mvm: properly tell the fw that a STA is awake

The firmware API wasn't being used correctly, fix that.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
11 years agoMerge remote-tracking branch 'wireless-next/master' into iwlwifi-next
Johannes Berg [Tue, 11 Jun 2013 18:16:44 +0000 (20:16 +0200)]
Merge remote-tracking branch 'wireless-next/master' into iwlwifi-next

11 years agoiwlwifi: include export.h instead of module.h
Johannes Berg [Wed, 5 Jun 2013 15:36:26 +0000 (17:36 +0200)]
iwlwifi: include export.h instead of module.h

We only need EXPORT_SYMBOL_GPL, none of the other things
from module.h, so only include export.h.

Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
11 years agoiwlwifi: ignore 0-length PHY DB sections
Emmanuel Grumbach [Tue, 11 Jun 2013 12:17:21 +0000 (15:17 +0300)]
iwlwifi: ignore 0-length PHY DB sections

This can happen during development but can cause problems,
WARN (once) and go on.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Reviewed-by: Guy Cohen <guy.cohen@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
11 years agoiwlwifi: mvm: fix irrelevant comment
Emmanuel Grumbach [Mon, 10 Jun 2013 11:10:33 +0000 (14:10 +0300)]
iwlwifi: mvm: fix irrelevant comment

This code moved and is now far away from the code that takes
the mutex.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
11 years agoiwlwifi: mvm: remove unused wait_for_ba field
Emmanuel Grumbach [Mon, 10 Jun 2013 10:42:40 +0000 (13:42 +0300)]
iwlwifi: mvm: remove unused wait_for_ba field

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
11 years agocw1200: Fix an assorted pile of checkpatch warnings.
Solomon Peachy [Tue, 11 Jun 2013 13:49:40 +0000 (09:49 -0400)]
cw1200: Fix an assorted pile of checkpatch warnings.

Signed-off-by: Solomon Peachy <pizza@shaftnet.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
11 years agocw1200: Eliminate the ETF debug/engineering code.
Solomon Peachy [Tue, 11 Jun 2013 13:49:39 +0000 (09:49 -0400)]
cw1200: Eliminate the ETF debug/engineering code.

This is only really useful for people who are bringing up new hardware
designs and have access to the proprietary vendor tools that interface
with this mode.

It'll live out of tree until it's rewritten to use a less kludgy interface.

Signed-off-by: Solomon Peachy <pizza@shaftnet.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
11 years agocw1200: Remove "ITP" debug subsystem.
Solomon Peachy [Tue, 11 Jun 2013 13:49:38 +0000 (09:49 -0400)]
cw1200: Remove "ITP" debug subsystem.

This can live on as an out-of-tree patch for those that care.

Signed-off-by: Solomon Peachy <pizza@shaftnet.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
11 years agort2x00: rt2x00queue: initialize data_queue fields earlier
Gabor Juhos [Mon, 3 Jun 2013 21:39:53 +0000 (23:39 +0200)]
rt2x00: rt2x00queue: initialize data_queue fields earlier

Support for rt2800 device is broken since my
'rt2x00: rt2x00dev: use rt2x00dev->tx->limit'
patch. The changelog of that commit says that the
TX data queue is initialized already when the
rt2x00lib_probe_hw() function is called.

However as Jakub noticed it, this statement is not
correct. The queue->limit field is initialized in
the rt2x00queue_alloc_entries routine and that is
not yet called when rt2x00lib_probe_hw() runs.
Because the value of tx->limit contains zero, the
driver tries to allocate a kernel fifo with zero
size and kfifo_alloc rejects that with -EINVAL.

  PCI: Enabling device 0000:01:00.0 (0000 -> 0002)
  ieee80211 phy1: rt2x00_set_rt: Info - RT chipset 3071, rev 021c detected
  ieee80211 phy1: rt2x00_set_rf: Info - RF chipset 0008 detected
  ieee80211 phy1: rt2x00lib_probe_dev: Error - Failed to initialize hw
  rt2800pci: probe of 0000:01:00.0 failed with error -22

Move the data_queue field initialization from
the rt2x00queue_alloc_entries routine into the
rt2x00queue_init function. The initialization
code is not strictly related to the allocation,
and the change ensures that the queue_data fields
can be used in the probe routines.

The patch also introduces a helper function in
order to be able to get the correct data_queue_desc
structure for a given queue. This helper is only
needed temporarily and it will be removed later.

Reported-by: Jakub Kicinski <moorray@wp.pl>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
11 years agortlwifi: initialize local array and set value.
Yunlian Jiang [Fri, 31 May 2013 21:45:21 +0000 (14:45 -0700)]
rtlwifi: initialize local array and set value.

GCC 4.8 is spitting out uninitialized-variable warnings against
"drivers/net/wireless/rtlwifi/rtl8192de/dm.c".

drivers/net/wireless/rtlwifi/rtl8192de/dm.c:941:31:
error: 'ofdm_index_old[1]' may be used uninitialized in this
function [-Werror=maybe-uninitialized]
     rtlpriv->dm.ofdm_index[i] = ofdm_index_old[i];

This patch adds initialization to the variable and properly sets its value.

Signed-off-by: Yunlian Jiang <yunlian@google.com>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
11 years agoMerge branch 'for-john' of git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi...
John W. Linville [Mon, 10 Jun 2013 18:51:17 +0000 (14:51 -0400)]
Merge branch 'for-john' of git://git./linux/kernel/git/iwlwifi/iwlwifi-next

11 years agocw1200: handle allocation failure in wsm_event_indication()
Dan Carpenter [Thu, 6 Jun 2013 10:57:46 +0000 (03:57 -0700)]
cw1200: handle allocation failure in wsm_event_indication()

Check for allocation failures and return -ENOMEM.  The caller
already expects it.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
11 years agocw1200: read beyond end of array in debug code
Dan Carpenter [Thu, 6 Jun 2013 07:43:00 +0000 (10:43 +0300)]
cw1200: read beyond end of array in debug code

This has only one caller and rates[] is an array with
IEEE80211_TX_MAX_RATES (4) elements.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
11 years agocw1200: Sanity-check arguments in copy_from_user()
Solomon Peachy [Wed, 5 Jun 2013 03:37:05 +0000 (23:37 -0400)]
cw1200: Sanity-check arguments in copy_from_user()

The optional debugfs interface to the vendor's engineering tools wasn't
bounds checking at all, which made it trivial to perform a buffer
overflow if this interface was compiled in and then explicitly enabled
at runtime.

This patch checks both the length supplied as part of the data to ensure
it is sane, and also the amount of data compared to the remaining buffer
space.  If either is too large, fail immediately.

(This bug was spotted by Dan Carpenter <dan.carpenter@oracle.com>)

Signed-off-by: Solomon Peachy <pizza@shaftnet.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
11 years agocw1200: hwio: Remove an unnecessary goto
Joe Perches [Tue, 4 Jun 2013 14:44:50 +0000 (07:44 -0700)]
cw1200: hwio: Remove an unnecessary goto

goto after return is wrong.

The other code in this block needs to set an
error value then goto an error release block.

This one doesn't need to release anything and
was likely a copy/paste remainder.

Signed-off-by: Joe Perches <joe@perches.com>
Acked-By: Solomon Peachy <pizza@shaftnet.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
11 years agoiwlwifi: mvm: remove iwl_mvm_dbgfs_set_fw_dbg_log declaration
Johannes Berg [Mon, 10 Jun 2013 11:27:06 +0000 (13:27 +0200)]
iwlwifi: mvm: remove iwl_mvm_dbgfs_set_fw_dbg_log declaration

This function doesn't actually exist, remove its declaration.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
11 years agoiwlwifi: mvm: don't request SMPS on non-STA iface
Eytan Lifshitz [Tue, 4 Jun 2013 09:28:51 +0000 (12:28 +0300)]
iwlwifi: mvm: don't request SMPS on non-STA iface

The Thermal Throttling code could do that, fix it.

Signed-off-by: Eytan Lifshitz <eytan.lifshitz@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
11 years agoiwlwifi: mvm: fix MCAST in AP mode
Emmanuel Grumbach [Sun, 2 Jun 2013 16:54:01 +0000 (19:54 +0300)]
iwlwifi: mvm: fix MCAST in AP mode

In multicast, there is no retries nor RTS since there is no
specific recipient that can ACK or send CTS. This means
that we must not use the rate scale table for multicast
frames.
This true for any frame that doesn't have a valid
ieee80211_sta pointer.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
11 years agoiwlwifi: mvm: enable PM always in unassociated mode
Alexander Bondar [Mon, 27 May 2013 10:49:03 +0000 (13:49 +0300)]
iwlwifi: mvm: enable PM always in unassociated mode

In unassociated BSS STA mode FW verifies both power save and power
management flags to decide on switching power off. The driver currently
sets power management flag according to mac80211 decision. As result, in
unassociated mode power management flag is down and power consumption is
high. Change power management enablement. When unassociated in BPS and
LP power save modes enable power management regardless of mac80211
decision. Rely on mac80211 decision if associated. Add power management
state update during associated/disassociated modes transitions.

Signed-off-by: Alexander Bondar <alexander.bondar@intel.com>
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
11 years agoiwlwifi: mvm: Change location of vif_count verification for PM
Alexander Bondar [Wed, 29 May 2013 07:19:50 +0000 (10:19 +0300)]
iwlwifi: mvm: Change location of vif_count verification for PM

Currently vif_count verification for power management enablement appear
in different places. Move these verifications to one place in
iwl_mvm_update_power_mode().

Signed-off-by: Alexander Bondar <alexander.bondar@intel.com>
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
11 years agoiwlwifi: mvm: correctly configure MCAST in AP mode
Emmanuel Grumbach [Sun, 26 May 2013 17:47:53 +0000 (20:47 +0300)]
iwlwifi: mvm: correctly configure MCAST in AP mode

The AP mode needs to use the MCAST fifo for the MCAST
frames sent after the DTIM. This fifo needs to be
configured with the same parameters as the VOICE FIFO.

A separate SCD queue is mapped to this fifo - the cab_queue
(cab stands for Content After Beacon). This queue isn't
connected to any station, but rather to the MAC context.
This queue should (and is already) be set as the MCAST
queue - this is part of the of MAC context command.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
11 years agoiwlwifi: mvm: reorder Rx handler for performance purposes
Emmanuel Grumbach [Sun, 2 Jun 2013 17:54:48 +0000 (20:54 +0300)]
iwlwifi: mvm: reorder Rx handler for performance purposes

Since SCAN related handlers are much less likely than
beacon related handlers, reorder between them.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
11 years agoiwlwifi: mvm: Fix quota command settings
Ilan Peer [Thu, 30 May 2013 04:31:01 +0000 (07:31 +0300)]
iwlwifi: mvm: Fix quota command settings

According to the FW implementation, the quota command should
have a valid entry for each active binding (where 'active' in
this context means that the binding is known to the FW). In case
the binding should not get any quota, the 'quota' should be set
to zero.

Not setting an 0 quota for an active binding when all the MACs
in the binding are idle, i.e., not associated in case of managed
interface, will result in preventing the FW scheduler from entering
IDLE state and the FW from transitioning to low PS.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
11 years agoiwlwifi: don't return -ERFKILL if SEND_IF_RFKILL is set
Eran Harary [Sun, 2 Jun 2013 09:40:34 +0000 (12:40 +0300)]
iwlwifi: don't return -ERFKILL if SEND_IF_RFKILL is set

When CMD_SEND_IN_RFKILL is set, it is perfectly legitimate
to send a host command while RFKILL is asserted. In this
case, the host command sending functions should return 0
even if RFKILL is asserted.

Signed-off-by: Eran Harary <eran.harary@intel.com>
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
11 years agoiwlwifi: mvm: don't enable MIMO when BT is active
Emmanuel Grumbach [Tue, 28 May 2013 20:12:47 +0000 (23:12 +0300)]
iwlwifi: mvm: don't enable MIMO when BT is active

Another step in the rate control / BT Coex integration

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
11 years agoiwlwifi: mvm: don't start BA agreement when BT is active
Emmanuel Grumbach [Tue, 28 May 2013 18:36:16 +0000 (21:36 +0300)]
iwlwifi: mvm: don't start BA agreement when BT is active

Otherwise WiFi would kill BT.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
11 years agoiwlwifi: mvm: limit the length of the AMPDU when BT is running
Emmanuel Grumbach [Tue, 28 May 2013 18:31:50 +0000 (21:31 +0300)]
iwlwifi: mvm: limit the length of the AMPDU when BT is running

This holds for existing BA agreements.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
11 years agoiwlwifi: mvm: fix the LUT for BT Coex
Emmanuel Grumbach [Wed, 29 May 2013 06:09:30 +0000 (09:09 +0300)]
iwlwifi: mvm: fix the LUT for BT Coex

There was a typo in the Loose LUT for BT Coex.
Fix that.

Reported-by: Roi Cohen <roi.cohen@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
11 years agobrcmsmac: Reduce log spam in heavy tx, make err print in debug
John Greene [Mon, 3 Jun 2013 13:47:39 +0000 (09:47 -0400)]
brcmsmac: Reduce log spam in heavy tx, make err print in debug

Move message to debug mode to reduce log spam under heavy tx (iperf) load.
This message prints in ht debug mode only:
brcms_c_ampdu_dotxstatus_complete: Pkt tx suppressed, illegal channel
possibly 153

Signed-off-by: John Greene <jogreene@redhat.com>
Acked-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
11 years agoath9k: Do not maintain ANI state per-channel
Sujith Manoharan [Mon, 3 Jun 2013 03:49:29 +0000 (09:19 +0530)]
ath9k: Do not maintain ANI state per-channel

ANI state can be maintained globally instead of per-channel.
This reduces memory usage and since default values are used
during a scan run, per-channel state is not required.

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
11 years agoath9k: Print ANI statistics in debugfs
Sujith Manoharan [Mon, 3 Jun 2013 03:49:28 +0000 (09:19 +0530)]
ath9k: Print ANI statistics in debugfs

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
11 years agoath9k: Set ofdmWeakSigDetect directly
Sujith Manoharan [Mon, 3 Jun 2013 03:49:27 +0000 (09:19 +0530)]
ath9k: Set ofdmWeakSigDetect directly

The macros ATH9K_ANI_USE_OFDM_WEAK_SIG can be removed.

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
11 years agoath9k: Simplify ANI initialization
Sujith Manoharan [Mon, 3 Jun 2013 03:49:26 +0000 (09:19 +0530)]
ath9k: Simplify ANI initialization

The check "enable_ani" is not required since it is always
set to true and the logic for disabling/enabling ANI via
debugfs is done at a higher layer.

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
11 years agoath9k: Remove unused structure ath_dbg_bb_mac_samp
Sujith Manoharan [Mon, 3 Jun 2013 03:49:25 +0000 (09:19 +0530)]
ath9k: Remove unused structure ath_dbg_bb_mac_samp

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
11 years agoath9k: Enable WoW only for AR9462
Sujith Manoharan [Mon, 3 Jun 2013 03:49:24 +0000 (09:19 +0530)]
ath9k: Enable WoW only for AR9462

The only card with which WoW has been tested and verified is
AR9462. Do not enable it for all cards since WoW is really quirky
and needs to be tested properly with each chip.

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
11 years agoath9k: Return early for invalid rates
Sujith Manoharan [Mon, 3 Jun 2013 03:49:23 +0000 (09:19 +0530)]
ath9k: Return early for invalid rates

Process and update the internal RSSI average, which
is used by ANI, after verifying that the received
frame has valid rate information.

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
11 years agonet, ipw2x00: remove redundant D0 power state set
Yijing Wang [Thu, 30 May 2013 10:21:29 +0000 (18:21 +0800)]
net, ipw2x00: remove redundant D0 power state set

Pci_enable_device() will set device power state to D0,
so it's no need to do it again in ipw2100_pci_init_one().

Signed-off-by: Yijing Wang <wangyijing@huawei.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
11 years agoath9k: advertise support for active monitor interfaces
Felix Fietkau [Tue, 28 May 2013 11:01:54 +0000 (13:01 +0200)]
ath9k: advertise support for active monitor interfaces

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
11 years agoMerge branch 'for-john' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac802...
John W. Linville [Mon, 3 Jun 2013 19:55:37 +0000 (15:55 -0400)]
Merge branch 'for-john' of git://git./linux/kernel/git/jberg/mac80211-next

11 years agocw1200: rename the cw1200 platform definition header
Solomon Peachy [Sun, 2 Jun 2013 15:35:32 +0000 (11:35 -0400)]
cw1200: rename the cw1200 platform definition header

My previous patch just moved the file, but it also needed to be renamed
to conform to proper conventions.

Signed-off-by: Solomon Peachy <pizza@shaftnet.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
11 years agocw1200: Rework SDIO platform support to prevent build problems.
Solomon Peachy [Sun, 2 Jun 2013 15:35:31 +0000 (11:35 -0400)]
cw1200: Rework SDIO platform support to prevent build problems.

Based on discussions with And Bergmann, this patch changes the SDIO
platform code to default to supporting the Sagrad devices, allowing for
it to be overridden in board setup code.  This renders the cw1200_sagrad
module suplerflous, so it is now removed.

It also moves the documentation that was in the cw1200_sagrad source to
the platform header.

Signed-off-by: Solomon Peachy <pizza@shaftnet.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
11 years agocw1200: Replace use of 'struct resource' with 'int' for GPIO fields.
Solomon Peachy [Sun, 2 Jun 2013 13:53:03 +0000 (09:53 -0400)]
cw1200: Replace use of 'struct resource' with 'int' for GPIO fields.

The only advantage of 'struct resource' is that it lets us assign names
as part of the platform data.  Unfortunately since we are using platform
data, we are already limited to a single instance of each driver,
rendering this moot.

So, replace the struct resources with ints, resulting in cleaner code.

This was based on a suggestion from Arnd Bergmann.

Signed-off-by: Solomon Peachy <pizza@shaftnet.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
11 years agocw1200: Reference correct 'powerup' GPIO signal.
Solomon Peachy [Sun, 2 Jun 2013 13:53:02 +0000 (09:53 -0400)]
cw1200: Reference correct 'powerup' GPIO signal.

Signed-off-by: Solomon Peachy <pizza@shaftnet.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
11 years agocw1200: move platform_data header to correct location.
Solomon Peachy [Sun, 2 Jun 2013 13:53:01 +0000 (09:53 -0400)]
cw1200: move platform_data header to correct location.

(As suggested by Arnd Bergmann)

Signed-off-by: Solomon Peachy <pizza@shaftnet.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
11 years agocw1200: Rename 'sbus' to 'hwbus'
Solomon Peachy [Sat, 1 Jun 2013 12:08:42 +0000 (08:08 -0400)]
cw1200: Rename 'sbus' to 'hwbus'

This avoids problems when building on SPARC targets due to the driver
calling the bus abstraction layer 'sbus'.  Not that any SBUS-sporting
SPARC targets are likely to have an SDIO controller, but this is the
correct thing to do.

See http://kisskb.ellerman.id.au/kisskb/buildresult/8846508/

Signed-off-by: Solomon Peachy <pizza@shaftnet.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
11 years agomac80211: fix sdata locking around __ieee80211_request_smps
Johannes Berg [Mon, 3 Jun 2013 11:51:59 +0000 (13:51 +0200)]
mac80211: fix sdata locking around __ieee80211_request_smps

My cfg80211/mac80211 locking unification broke the sdata
locking in ieee80211_set_power_mgmt, it needs to acquire
the lock for __ieee80211_request_smps(). Add the locking.

Reported-by: Jakub Kicinski <kubakici@wp.pl>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
11 years agoRevert "mac80211_hwsim: remove P2P_DEVICE support"
Johannes Berg [Fri, 31 May 2013 08:17:49 +0000 (10:17 +0200)]
Revert "mac80211_hwsim: remove P2P_DEVICE support"

This reverts commit e3ee68b7b049c5bbfcb78a179c00c373a38ed58c.

This wasn't intended to be included here, my mistake. I
accidentally merged a mac80211 fixes tree here that had
this change, when it wasn't even intended to be there.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
11 years agoRevert "iwlwifi: mvm: remove P2P_DEVICE support"
Johannes Berg [Fri, 31 May 2013 08:17:19 +0000 (10:17 +0200)]
Revert "iwlwifi: mvm: remove P2P_DEVICE support"

This reverts commit eebfc9394ee31b3ef162692c0cd483c1318a4395.

This wasn't intended to be included here, my mistake. I
accidentally merged a mac80211 fixes tree here that had
this change, when it wasn't even intended to be there.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
11 years agocw1200: remove unused including <linux/version.h>
Wei Yongjun [Thu, 30 May 2013 11:43:13 +0000 (19:43 +0800)]
cw1200: remove unused including <linux/version.h>

Remove including <linux/version.h> that don't need it.

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
11 years agocw1200: use module_spi_driver to simplify the code
Wei Yongjun [Thu, 30 May 2013 11:42:54 +0000 (19:42 +0800)]
cw1200: use module_spi_driver to simplify the code

module_spi_driver() makes the code simpler by eliminating
boilerplate code.

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
11 years agocw1200: convert to use simple_open()
Wei Yongjun [Thu, 30 May 2013 11:42:35 +0000 (19:42 +0800)]
cw1200: convert to use simple_open()

This removes an open coded simple_open() function and
replaces file operations references to the function
with simple_open() instead.

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
11 years agocw1200: remove duplicated include from wsm.c
Wei Yongjun [Thu, 30 May 2013 11:41:11 +0000 (19:41 +0800)]
cw1200: remove duplicated include from wsm.c

Remove duplicated include.

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
11 years agocw1200: Fix compile with CONFIG_PM=n
Solomon Peachy [Thu, 30 May 2013 02:22:05 +0000 (22:22 -0400)]
cw1200: Fix compile with CONFIG_PM=n

Intel's 0-day kernel build tester caught this build failure.  This patch
properly wraps everything that depends on CONFIG_PM.

Signed-off-by: Solomon Peachy <pizza@shaftnet.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
11 years agoath9k: check for Rx-STBC flag and pass it to ieee80211
Oleksij Rempel [Fri, 24 May 2013 18:30:59 +0000 (20:30 +0200)]
ath9k: check for Rx-STBC flag and pass it to ieee80211

This patch make use of STBC flag in DMA RX descriptor.
Only devices after ar9280 can provide this information.

If card support it we will set HAVE_STBC flag, to show
clint programm thet STBC is supported but not received.

Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
11 years agoath9k: remove useless flag conversation.
Oleksij Rempel [Fri, 24 May 2013 10:18:30 +0000 (12:18 +0200)]
ath9k: remove useless flag conversation.

some flags used only outside of ath9k - In this case we can use
"enum mac80211_rx_flags" and pass it upstream without extra
conversation.

Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
11 years agoiwlwifi: mvm: implement D3 testing
Johannes Berg [Tue, 14 May 2013 11:53:45 +0000 (13:53 +0200)]
iwlwifi: mvm: implement D3 testing

For testing the D3 (WoWLAN) firmware, it is useful to be able
to run the firmware with instrumentation while the host isn't
sleeping and can poke at the firmware debug logging etc.

Implement this by a debugfs file. When the file is opened the
D3 firmware is loaded and all regular commands are blocked.
While the file is being read, poll the firmware's PME status
flag and report EOF once it changes to non-zero. When it is
closed, do (most of) the resume processing. This lets a user
just "cat" the file. Pressing Ctrl-C to kill the cat process
will resume the firwmare as though the platform resumed for
non-wireless reason and when the firmware wants to wake up
reading from the file automatically completes.

Unlike in real suspend, only disable interrupts and don't
reset the TX/RX hardware while in the test mode. This is a
workaround for some interrupt problems that happen only when
the PCIe link isn't fully reset (presumably by changing the
PCI config space registers which the core PCI code does.)

Note that while regular operations are blocked from sending
commands to the firmware, they could still be made and cause
strange mac80211 issues. Therefore, while using this testing
feature you need to be careful to not try to disconnect, roam
or similar, and will see warnings for such attempts.

Als note that this requires an upcoming firmware change to
tell the driver the location of the PME status flag in SRAM.
D3 test will fail if the firmware doesn't report the pointer.

Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
11 years agoMerge remote-tracking branch 'wireless-next/master' into iwlwifi-next
Johannes Berg [Wed, 29 May 2013 19:56:46 +0000 (21:56 +0200)]
Merge remote-tracking branch 'wireless-next/master' into iwlwifi-next

11 years agocw1200: add driver for the ST-E CW1100 & CW1200 WLAN chipsets
Solomon Peachy [Sat, 25 May 2013 00:04:38 +0000 (20:04 -0400)]
cw1200: add driver for the ST-E CW1100 & CW1200 WLAN chipsets

Signed-off-by: Solomon Peachy <pizza@shaftnet.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
11 years agomwifiex: dump small buffers with help of %*ph
Andy Shevchenko [Wed, 29 May 2013 10:04:20 +0000 (13:04 +0300)]
mwifiex: dump small buffers with help of %*ph

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
11 years agonet: wireless: p54spi: Fix commenting style
Sachin Kamat [Wed, 29 May 2013 10:01:41 +0000 (15:31 +0530)]
net: wireless: p54spi: Fix commenting style

Make the commenting style consistent with networking block comment
style as suggested by checkpatch.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
11 years agonet: wireless: p54spi: Use module_spi_driver macro
Sachin Kamat [Wed, 29 May 2013 10:01:40 +0000 (15:31 +0530)]
net: wireless: p54spi: Use module_spi_driver macro

module_spi_driver() eliminates some boiler plate and makes code
simpler.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
11 years agoath9k_hw: fix PA predistortion miscalibration
Felix Fietkau [Tue, 28 May 2013 16:04:44 +0000 (18:04 +0200)]
ath9k_hw: fix PA predistortion miscalibration

If any bins from the training data are skipped (i != max_index), the
calculated compensation curve gets distorted, and the signal will be
wildly overamplified. This may be the cause of the reported hardware
damage that was caused by PA predistortion (because of which PAPRD was
disabled by default).

When calculating the x_est, Y, theta values, the use of max_index and i
was reversed. i points to the bin index whereas max_index refers to the
index of the calculated arrays.

Note that PA predistortion is still disabled, it will be re-enabled
after it has been properly validated.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
11 years agowil6210: Don't use wdev->sme_state
Vladimir Kondratiev [Tue, 28 May 2013 12:17:53 +0000 (15:17 +0300)]
wil6210: Don't use wdev->sme_state

sme_state is private wdev's variable.
Track connection state internally

Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
11 years agowil6210: channel off by 1
Vladimir Kondratiev [Tue, 28 May 2013 12:17:52 +0000 (15:17 +0300)]
wil6210: channel off by 1

WMI commands wants channel index, that is channel - 1

Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
11 years agoMerge branch 'for-john' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac802...
John W. Linville [Wed, 29 May 2013 18:51:50 +0000 (14:51 -0400)]
Merge branch 'for-john' of git://git./linux/kernel/git/jberg/mac80211-next

11 years agoMerge branch 'for-john' of git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi...
John W. Linville [Wed, 29 May 2013 18:50:45 +0000 (14:50 -0400)]
Merge branch 'for-john' of git://git./linux/kernel/git/iwlwifi/iwlwifi-next

11 years agomac80211: always send multicast on CAB queue
Johannes Berg [Tue, 28 May 2013 15:24:15 +0000 (17:24 +0200)]
mac80211: always send multicast on CAB queue

If the driver advertised support for a CAB queue, then we
should put all multicast frames there, otherwise sending
them can be racy with clients going to sleep while we TX
a frame. To avoid this, always TX multicast frames on the
multicast queue.

It seems like even drivers not using the queue framework
might want to do this which would mean also moving the
IEEE80211_TX_CTL_SEND_AFTER_DTIM flag assignment, but it
also seems that drivers behave differently here so that
just moving it wouldn't be a good idea. It'd be better to
modify those drivers to use the queue framework.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
11 years agocfg80211: remove cleanup_work kernel-doc
Johannes Berg [Wed, 29 May 2013 07:08:05 +0000 (09:08 +0200)]
cfg80211: remove cleanup_work kernel-doc

I evidently forgot this when removing the work itself.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
11 years agomac80211: support active monitor interfaces
Felix Fietkau [Tue, 28 May 2013 11:01:53 +0000 (13:01 +0200)]
mac80211: support active monitor interfaces

Support them only if the driver advertises support for them via
IEEE80211_HW_SUPPORTS_ACTIVE_MONITOR. Unlike normal monitor interfaces,
they are added to the driver, along with their MAC address.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
11 years agocfg80211: support an active monitor interface flag
Felix Fietkau [Tue, 28 May 2013 11:01:52 +0000 (13:01 +0200)]
cfg80211: support an active monitor interface flag

An active monitor interface is one that is used for communication (via
injection). It is expected to ACK incoming unicast packets. This is
useful for running various 802.11 testing utilities that associate to an
AP via injection and manage the state in user space.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
11 years agoiwlwifi: mvm: add debugfs for powersave
Alexander Bondar [Tue, 21 May 2013 11:49:09 +0000 (14:49 +0300)]
iwlwifi: mvm: add debugfs for powersave

Add debugfs files to control powersave parameters for testing.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
11 years agoiwlwifi: mvm: Add support for connection monitor offload
Hila Gonen [Wed, 13 Mar 2013 16:00:03 +0000 (18:00 +0200)]
iwlwifi: mvm: Add support for connection monitor offload

The firmware supports periodic keep alive and beacon monitoring,
so advertise connection monitor offload capability by setting
IEEE80211_HW_CONNECTION_MONITOR flag. Implement missed beacons
notification handler. Call ieee80211_beacon_loss in case of
missed beacons, so AP probing by mac80211 can be triggered.

Signed-off-by: Hila Gonen <hila.gonen@intel.com>
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
11 years agoiwlwifi: take valid ant for HT caps from TLV
Emmanuel Grumbach [Wed, 22 May 2013 10:16:23 +0000 (13:16 +0300)]
iwlwifi: take valid ant for HT caps from TLV

I forgot to take them from TLV and took them from the NVM
instead.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
11 years agoiwlwifi: mvm: Change number of DTIMs to skip semantics
Alexander Bondar [Tue, 21 May 2013 11:49:09 +0000 (14:49 +0300)]
iwlwifi: mvm: Change number of DTIMs to skip semantics

If skip over DTIMs is enabled the driver can specify number of DTIMs
to skip. This parameter in host-device API implies number of DTIM
periods to skip. For example, to skip one DTIM means sleep over two
DTIM periods. Change semantics accordingly. Change this parameter's
default value.

Signed-off-by: Alexander Bondar <alexander.bondar@intel.com>
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
11 years agoiwlwifi: mvm: add thermal throttling and CT kill
Eytan Lifshitz [Sun, 19 May 2013 16:14:41 +0000 (19:14 +0300)]
iwlwifi: mvm: add thermal throttling and CT kill

In order to avoid NIC destruction due to high temperature,
CT kill will power down the NIC.

To avoid this, thermal throttling will decrease throughput
to prevent the NIC from reaching the temperature at which
CT kill is performed.

Signed-off-by: Eytan Lifshitz <eytan.lifshitz@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
11 years agocfg80211: make WoWLAN configuration available to drivers
Johannes Berg [Wed, 15 May 2013 07:30:07 +0000 (09:30 +0200)]
cfg80211: make WoWLAN configuration available to drivers

Make the current WoWLAN configuration available to drivers
at runtime. This isn't really useful for the normal WoWLAN
behaviour and accessing it can also be racy, but drivers
may use it for testing the WoWLAN device behaviour while
the host stays up & running to observe the device.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
11 years agoiwlwifi: mvm: use proper scan type for P2P
Emmanuel Grumbach [Mon, 20 May 2013 05:59:31 +0000 (08:59 +0300)]
iwlwifi: mvm: use proper scan type for P2P

It was set to be FORCED because of a firmware bug which
has been fixed.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
11 years agoMerge remote-tracking branch 'iwlwifi-fixes/master' into HEAD
Johannes Berg [Mon, 27 May 2013 11:30:49 +0000 (13:30 +0200)]
Merge remote-tracking branch 'iwlwifi-fixes/master' into HEAD

Conflicts:
drivers/net/wireless/iwlwifi/mvm/ops.c

11 years agoiwlwifi: mvm: Add beacon abort enablement
Alexander Bondar [Mon, 6 May 2013 10:03:59 +0000 (13:03 +0300)]
iwlwifi: mvm: Add beacon abort enablement

Beacon abort is used by device to increase idle dwell time when system
is idle. This algorithm is on top of beacon filtering feature. Enable
beacon abort only if power management is enabled.

Signed-off-by: Alexander Bondar <alexander.bondar@intel.com>
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
11 years agoiwlwifi: dvm: constify configuration structs
Johannes Berg [Fri, 17 May 2013 08:38:21 +0000 (10:38 +0200)]
iwlwifi: dvm: constify configuration structs

The pointer that gets used is already const, so the
structs can obviously be const as well.

Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
11 years agoiwlwifi: move some configuration parameters into DVM
Johannes Berg [Fri, 17 May 2013 08:36:29 +0000 (10:36 +0200)]
iwlwifi: move some configuration parameters into DVM

There are a number of parameters that aren't really hardware
specific but rather define how the DVM firmware is used.
Move these into the DVM configuration.

Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
11 years agoiwlwifi: dvm: rename iwl_lib_ops to iwl_dvm_cfg
Johannes Berg [Fri, 17 May 2013 07:58:27 +0000 (09:58 +0200)]
iwlwifi: dvm: rename iwl_lib_ops to iwl_dvm_cfg

The next patches will move some more configuration
data that isn't needed by mvm into this struct, so
rename it now since it won't just be ops.

Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
11 years agoiwlwifi: move D3_CFG_COMPLETE handling into DVM
Johannes Berg [Fri, 17 May 2013 10:01:26 +0000 (12:01 +0200)]
iwlwifi: move D3_CFG_COMPLETE handling into DVM

The MVM firmware doesn't communicate this way, it instead
assumes D3 configuration is complete after a specific host
command (which must be last) has been sent. Handling this
bit thus belongs into the firmware API code, i.e. DVM.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
11 years agoiwlwifi: dvm: fix zero LQ CMD sending avoidance
Emmanuel Grumbach [Wed, 22 May 2013 07:48:10 +0000 (10:48 +0300)]
iwlwifi: dvm: fix zero LQ CMD sending avoidance

In 63b77bf489881747c5118476918cc8c29378ee63

iwlwifi: dvm: don't send zeroed LQ cmd

I tried to avoid to send zeroed LQ cmd, but I made a (very)
stupid mistake in the memcmp.
Since this patch has been ported to stable, the fix should
go to stable too.

This fixes https://bugzilla.kernel.org/show_bug.cgi?id=58341

Cc: stable@vger.kernel.org
Reported-by: Hinnerk van Bruinehsen <h.v.bruinehsen@fu-berlin.de>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
11 years agocfg80211: remove some locked wrappers from sme API
Johannes Berg [Wed, 15 May 2013 15:44:01 +0000 (17:44 +0200)]
cfg80211: remove some locked wrappers from sme API

By making all the API functions require wdev locking we
can clean up the API a bit, getting rid of the locking
version of each function. This also decreases the size
of cfg80211 by a small amount.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
11 years agocfg80211: remove some locked wrappers from mlme API
Johannes Berg [Wed, 15 May 2013 15:44:01 +0000 (17:44 +0200)]
cfg80211: remove some locked wrappers from mlme API

By making all the API functions require wdev locking we
can clean up the API a bit, getting rid of the locking
version of each function. This also decreases the size
of cfg80211 by a small amount.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
11 years agoregulatory: remove reg_mutex
Johannes Berg [Fri, 10 May 2013 17:17:17 +0000 (19:17 +0200)]
regulatory: remove reg_mutex

The reg_mutex is similar to the ones I just removed in
cfg80211 but even less useful since it protects global
data, and we hold the RTNL in all places (except module
unload) already.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
11 years agoregulatory: use RCU in regulatory_hint_11d()
Johannes Berg [Fri, 10 May 2013 17:07:52 +0000 (19:07 +0200)]
regulatory: use RCU in regulatory_hint_11d()

Since it just does a quick check of the last regulatory
request, the function doesn't have to hold the reg mutex
but can use RCU instead.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
11 years agocfg80211: simplify and correct P2P-Device scan check
Johannes Berg [Fri, 10 May 2013 16:58:00 +0000 (18:58 +0200)]
cfg80211: simplify and correct P2P-Device scan check

If the driver for some reason successfully finishes
scanning while in p2p_stop_device(), cfg80211 will
still set it to aborted. Simplify this code using the
new 'notified' value and only mark it aborted in case
the driver didn't notify cfg80211 at all (in which
case we also leak the request to not crash, this is
a driver bug.)

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
11 years agocfg80211/mac80211: use cfg80211 wdev mutex in mac80211
Johannes Berg [Fri, 10 May 2013 10:32:47 +0000 (12:32 +0200)]
cfg80211/mac80211: use cfg80211 wdev mutex in mac80211

Using separate locks in cfg80211 and mac80211 has always
caused issues, for example having to unlock in places in
mac80211 to call cfg80211, which even needed a framework
to make cfg80211 calls after some functions returned etc.

Additionally, I suspect some issues people have reported
with the cfg80211 state getting confused could be due to
such issues, when cfg80211 is asking mac80211 to change
state but mac80211 is in the process of telling cfg80211
that the state changed (in another way.)

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
11 years agocfg80211: vastly simplify locking
Johannes Berg [Wed, 8 May 2013 19:45:15 +0000 (21:45 +0200)]
cfg80211: vastly simplify locking

Virtually all code paths in cfg80211 already (need to) hold
the RTNL. As such, there's little point in having another
four mutexes for various parts of the code, they just cause
lock ordering issues (and much of the time, the RTNL and a
few of the others need thus be held.)

Simplify all this by getting rid of the extra four mutexes
and just use the RTNL throughout. Only a few code changes
were needed to do this and we can get rid of a work struct
for bonus points.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
11 years agocfg80211: use atomic_t for wiphy counter
Johannes Berg [Wed, 8 May 2013 19:49:02 +0000 (21:49 +0200)]
cfg80211: use atomic_t for wiphy counter

There's no need to lock, we can just use an atomic_t.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
11 years agocfg80211: move cfg80211_get_dev_from_ifindex under wext
Johannes Berg [Wed, 8 May 2013 19:34:22 +0000 (21:34 +0200)]
cfg80211: move cfg80211_get_dev_from_ifindex under wext

The function is only used and needed by the wext code
for scanning, so move it there.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
11 years agoMerge remote-tracking branch 'mac80211/master' into mac80211-next
Johannes Berg [Fri, 24 May 2013 22:01:30 +0000 (00:01 +0200)]
Merge remote-tracking branch 'mac80211/master' into mac80211-next

11 years ago{cfg,mac}80211: move mandatory rates calculation to cfg80211
Ashok Nagarajan [Sat, 11 May 2013 00:50:51 +0000 (17:50 -0700)]
{cfg,mac}80211: move mandatory rates calculation to cfg80211

Move mandatory rates calculation to cfg80211, shared with non mac80211 drivers.

Signed-off-by: Ashok Nagarajan <ashok@cozybit.com>
[extend documentation]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
11 years agomac80211: Move mesh estab_plinks outside mesh_stats debug group
Ashok Nagarajan [Tue, 14 May 2013 00:08:04 +0000 (17:08 -0700)]
mac80211: Move mesh estab_plinks outside mesh_stats debug group

As estab_plinks is not a statistics member, don't show its debug information
along with other mesh stat members

Signed-off-by: Ashok Nagarajan <ashok@cozybit.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>