IB/hfi1, IB/rdmavt: Move r_adefered to r_lock cache line

This field is causing excessive cache line bouncing.

There are spare bytes in the r_lock cache line so the best approach
is to make an rvt QP field and remove from the hfi1 priv field.

Signed-off-by: Sebastian Sanchez <sebastian.sanchez@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/hfi1: Fix checks for Offline transient state

In goto_offline() function pstate is masked by 0xff when compared
to PLS_OFFLINE state. Mask should be 0xf0, since upper 4 bits
specify the "major" state.

Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: Easwar Hariharan <easwar.hariharan@intel.com>
Signed-off-by: Jakub Byczkowski <jakub.byczkowski@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/ipoib: add get_link_ksettings in ethtool

In order to let the bonding driver report the correct speed
of the underlaying interfaces, when they are IPoIB, the ethtool
function get_link_ksettings() in the IPoIB driver is implemented.

Cc: Joe Jin <joe.jin@oracle.com>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Suggested-by: Håkon Bugge <Haakon.Bugge@oracle.com>
Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

infiniband: avoid dereferencing uninitialized dst on error path

With commit eea40b8f624f ("infiniband: call ipv6 route lookup
via the stub interface"), if the route lookup fails due to
ipv6 being disabled, the dst variable is left untouched, and
the following dst_release() may access uninitialized memory.

Since ipv6_dst_lookup() always sets dst to NULL in case of
lookup failure with ipv6 enabled, fix the above just
returning the error code if the lookup fails.

Fixes: eea40b8f624 ("infiniband: call ipv6 route lookup via the stub interface")
Reported-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/SA: Add OPA addr header

When importing the patch 57520751445b (IB/SA: Add OPA path record type),
a new header file should have been added to the repo as part of the
patch.  However, as the patch didn't apply cleanly using git am, I
instead used patch manually, and followed that up with git add -u, which
misses new files.  This adds the new file back in.

Fixes: 57520751445b (IB/SA: Add OPA path record type)
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/mlx5: Add port_xmit_wait to counter registers read

Add port_xmit_wait to the error counters read by mlx5_ib_process_mad to
ensure sysfs port counter provides correct value for PortXmitWait.
Otherwise the sysfs port_xmit_wait file always contains zero.

The previous MAD_IFC implementation populated this counter, but it was
removed during the migration to PPCNT for error counters (32-bit only).

Signed-off-by: Tim Wright <tim@binbash.co.uk>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/ocrdma: fix out of bounds access to local buffer

In write to debugfs file 'resource_stats' the local buffer 'tmp_str' is
written at index 'count-1' where 'count' is the size of the write, so
potentially 0.

This patch filters odd values for the write size/position to avoid this
type of problem.

Signed-off-by: Michael Mera <dev@michaelmera.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/mlx4: Fix incorrect order of formal and actual parameters

The last two actual parameters when calling id_map_find_by_sl_id()
from id_map_get() are swapped. However, the same formal parameters to
id_map_get() have them swapped as well, inverting the effect of the
first error.

This commit improves readability, but makes no functional change to
the code.

Signed-off-by: Håkon Bugge <haakon.bugge@oracle.com>
Reviewed-by: Wengang Wang <wen.gang.wang@oracle.com>
Reviewed-by: Knut Omang <knut.omang@oracle.com>
Acked-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/mlx4: Change flush logic so it adheres to the variable name

Change and simplify the code to match the variable name. This commit
improves readability but makes no functional change to the code.

Signed-off-by: Håkon Bugge <haakon.bugge@oracle.com>
Suggested-by: Wengang Wang <wen.gang.wang@oracle.com>
Reviewed-by: Wengang Wang <wen.gang.wang@oracle.com>
Reviewed-by: Knut Omang <knut.omang@oracle.com>
Acked-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

mlx5: Fix mlx5_ib_map_mr_sg mr length

In case we got an initial sg_offset, we need to
account for it in the mr length.

Cc: stable@vger.kernel.org
Fixes: ff2ba9936591 ("IB/core: Add passing an offset into the SG to
ib_map_mr_sg")
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Tested-by: Israel Rukshin <israelr@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/rxe: Don't clamp residual length to mtu

When reading a RDMA WRITE FIRST packet we copy the DMA length from the RDMA
header into the qp->resp.resid variable for later use. Later in check_rkey()
we clamp it to the MTU if the packet is an  RDMA WRITE packet and has a
residual length bigger than the MTU. Later in write_data_in() we subtract the
payload of the packet from the residual length. If the packet happens to have a
payload of exactly the MTU size we end up with a residual length of 0 despite
the packet not being the last in the conversation. When the next packet in the
conversation arrives, we don't have any residual length left and thus set the QP
into an error state.

This broke NVMe over Fabrics functionality over rdma_rxe.ko

The patch was verified using the following test.

 # echo eth0 > /sys/module/rdma_rxe/parameters/add
 # nvme connect -t rdma -a 192.168.155.101 -s 1023 -n nvmf-test
 # mkfs.xfs -fK /dev/nvme0n1
 meta-data=/dev/nvme0n1           isize=256    agcount=4, agsize=65536 blks
          =                       sectsz=4096  attr=2, projid32bit=1
          =                       crc=0        finobt=0, sparse=0
 data     =                       bsize=4096   blocks=262144, imaxpct=25
          =                       sunit=0      swidth=0 blks
 naming   =version 2              bsize=4096   ascii-ci=0 ftype=1
 log      =internal log           bsize=4096   blocks=2560, version=2
          =                       sectsz=4096  sunit=1 blks, lazy-count=1
 realtime =none                   extsz=4096   blocks=0, rtextents=0
 # mount /dev/nvme0n1 /tmp/
 [  148.923263] XFS (nvme0n1): Mounting V4 Filesystem
 [  148.961196] XFS (nvme0n1): Ending clean mount
 # dd if=/dev/urandom of=test.bin bs=1M count=128
 128+0 records in
 128+0 records out
 134217728 bytes (134 MB, 128 MiB) copied, 0.437991 s, 306 MB/s
 # sha256sum test.bin
 cde42941f045efa8c4f0f157ab6f29741753cdd8d1cff93a6b03649d83c4129a  test.bin
 # cp test.bin /tmp/
 sha256sum /tmp/test.bin
 cde42941f045efa8c4f0f157ab6f29741753cdd8d1cff93a6b03649d83c4129a  /tmp/test.bin

Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Sagi Grimberg <sagi@grimberg.me>
Cc: Max Gurtovoy <maxg@mellanox.com>
Acked-by: Moni Shoua <monis@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/SA: Add support to query OPA path records

When the bit 26 of capmask2 field in OPA classport info
query is set, SA will query for OPA path records instead
of querying for IB path records. Note that OPA
path records can only be queried by kernel ULPs.
Userspace clients continue to query IB path records.

Reviewed-by: Don Hiatt <don.hiatt@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/SA: Add OPA path record type

Add opa_sa_path_rec to sa_path_rec data structure.
The 'type' field in sa_path_rec identifies the
type of the path record.

Reviewed-by: Don Hiatt <don.hiatt@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/SA: Split struct sa_path_rec based on IB and ROCE specific fields

sa_path_rec now contains a union of sa_path_rec_ib and sa_path_rec_roce
based on the type of the path record. Note that fields applicable to
path record type ROCE v1 and ROCE v2 fall under sa_path_rec_roce.
Accessor functions are added to these fields so the caller doesn't have
to know the type.

Reviewed-by: Don Hiatt <don.hiatt@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/SA: Introduce path record specific types

struct sa_path_rec has a gid_type field. This patch introduces a more
generic path record specific type 'rec_type' which is either IB, ROCE v1
or ROCE v2. The patch also provides conversion functions to get
a gid type from a path record type and vice versa

Reviewed-by: Don Hiatt <don.hiatt@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/SA: Rename ib_sa_path_rec to sa_path_rec

Rename ib_sa_path_rec to a more generic sa_path_rec.
This is part of extending ib_sa to also support OPA
path records in addition to the IB defined path records.

Reviewed-by: Don Hiatt <don.hiatt@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/CM: Add braces when using sizeof

This patch adds braces around parameters to sizeof
as called out by checkpatch

Reviewed-by: Don Hiatt <don.hiatt@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/core: Define 'opa' rdma_ah_attr type

OPA ah_attr types allows core components to specify
attributes that may be specific to opa devices.
For instance, opa type ah_attr provides 32 bit lids
enabling larger OPA fabric sizes.

Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Don Hiatt <don.hiatt@intel.com>
Reviewed-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/core: Define 'ib' and 'roce' rdma_ah_attr types

rdma_ah_attr can now be either ib or roce allowing
core components to use one type or the other and also
to define attributes unique to a specific type. struct
ib_ah is also initialized with the type when its first
created. This ensures that calls such as modify_ah
dont modify the type of the address handle attribute.

Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Don Hiatt <don.hiatt@intel.com>
Reviewed-by: Sean Hefty <sean.hefty@intel.com>
Reviewed-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/core: Use rdma_ah_attr accessor functions

Modify core and driver components to use accessor functions
introduced to access individual fields of rdma_ah_attr

Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Don Hiatt <don.hiatt@intel.com>
Reviewed-by: Sean Hefty <sean.hefty@intel.com>
Reviewed-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/core: Add accessor functions for rdma_ah_attr fields

These accessor functions are supposed to be used to get
and set individual fields of struct rdma_ah_attr

Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Don Hiatt <don.hiatt@intel.com>
Reviewed-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/PVRDMA: Rename ib_ah_attr related functions

Functions pvrdma_ah_attr_to_ib and ib_ah_attr_to_pvrdma have
been renamed so they are in sync wit the rename of the
ib_ah_attr structure

Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Don Hiatt <don.hiatt@intel.com>
Reviewed-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/mthca: Rename to_ib_ah_attr to to_rdma_ah_attr

local function  to_ib_ah_attr is renamed so it in
sync with the rename of the ib_ah_attr structure

Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Don Hiatt <don.hiatt@intel.com>
Reviewed-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/mlx5: Rename to_ib_ah_attr to to_rdma_ah_attr

local function  to_ib_ah_attr is renamed so it in
sync with the rename of the ib_ah_attr structure

Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Don Hiatt <don.hiatt@intel.com>
Reviewed-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/mlx4: Rename to_ib_ah_attr to to_rdma_ah_attr

local function  to_ib_ah_attr is renamed so it in
sync with the rename of the ib_ah_attr structure

Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Don Hiatt <don.hiatt@intel.com>
Reviewed-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/core: Rename ib_destroy_ah to rdma_destroy_ah

Rename ib_destroy_ah to rdma_destroy_ah so its in sync with the
rename of the ib address handle attribute

Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Don Hiatt <don.hiatt@intel.com>
Reviewed-by: Sean Hefty <sean.hefty@intel.com>
Reviewed-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/core: Rename ib_query_ah to rdma_query_ah

Rename ib_query_ah to rdma_query_ah so its in sync with the
rename of the ib address handle attribute

Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Don Hiatt <don.hiatt@intel.com>
Reviewed-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/core: Rename ib_modify_ah to rdma_modify_ah

Rename ib_modify_ah to rdma_modify_ah so its in sync with the
rename of the ib address handle attribute

Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Don Hiatt <don.hiatt@intel.com>
Reviewed-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/core: Rename ib_create_ah to rdma_create_ah

Rename ib_create_ah to rdma_create_ah so its in sync with the
rename of the ib address handle attribute

Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Don Hiatt <don.hiatt@intel.com>
Reviewed-by: Sean Hefty <sean.hefty@intel.com>
Reviewed-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/core: Rename struct ib_ah_attr to rdma_ah_attr

This patch simply renames struct ib_ah_attr to
rdma_ah_attr as these fields specify attributes that are
not necessarily specific to IB.

Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Don Hiatt <don.hiatt@intel.com>
Reviewed-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Reviewed-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/rxe: Initialize ib_ah_attr during query_ah

Zero out ib_ah_attr before calling query_ah. Set ah_flags
appropriately.

Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Don Hiatt <don.hiatt@intel.com>
Reviewed-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/core: Check for global flag when using ah_attr

Read/write grh fields of the ah_attr only if the
ah_flags field has the IB_AH_GRH bit enabled

Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Don Hiatt <don.hiatt@intel.com>
Reviewed-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/core: Add braces when using sizeof

This patch adds braces around parameters to sizeof
as called out by checkpatch

Reviewed-by: Don Hiatt <don.hiatt@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/IPoIB: Remove 'else' when the 'if' has a return.

This patch fixes a checkpatch issue related to not having
to use an 'else' if the 'if' path returns from the function.

Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Don Hiatt <don.hiatt@intel.com>
Reviewed-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/ocrdma: Add identifier names to function definitions

Address a checkpatch issue on missing identifier names
on function definitions.

Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Don Hiatt <don.hiatt@intel.com>
Reviewed-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/SA: Add support to query opa classport info.

For OPA devices, SA will query the OPA classport info
instead of the IB defined classport info.
opa classport info exposes additional information and
capabilities that are specific to OPA devices.

Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Don Hiatt <don.hiatt@intel.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/core: Move opa_class_port_info definition to header file

Both opa_vnic and the hfi driver use the same opa_classport_info
definition. We will also have ib_sa capable of querying opa class
port info and would need this definition. Move it to ib_mad.h
for everyone to use.

Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/core: Add rdma_cap_opa_ah to expose opa address handles

rdma_cap_opa_ah(..) enables core components to check if the
corresponding port supports OPA extended addressing.

Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Don Hiatt <don.hiatt@intel.com>
Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/SA: Modify SA to implicitly cache Class Port info

SA will query and cache class port info as part of
its initialization. SA will also invalidate and
refresh the cache based on specific events. Callers such
as IPoIB and CM can query the SA to get the classportinfo
information. Apart from making the caller code much simpler,
this change puts the onus on the SA to query and maintain
classportinfo much like how it maitains the address handle to the SM.

Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Don Hiatt <don.hiatt@intel.com>
Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/SA: Move functions update_sm_ah() and ib_sa_event()

Moving these will facilitate changes to these in the
next patchs. This is strictly a move and there are no
changes to the functions in any way.

Reviewed-by: Don Hiatt <don.hiatt@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/SA: Remove unwanted braces

This fixes a checkpatch issue. The fix is needed
so that some of these functions can be moved around
in the forthcoming patches

Reviewed-by: Don Hiatt <don.hiatt@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/SA: Add braces when using sizeof

This fixes a checkpatch issue. The fix is needed
so that some of these functions can be moved around
in the forthcoming patches

Reviewed-by: Don Hiatt <don.hiatt@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/SA: Fix lines longer than 80 columns

This fixes a checkpatch issue. The fix is needed
so that some of these functions can be moved around
in the forthcoming patches

Reviewed-by: Don Hiatt <don.hiatt@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/hfi1: Use bool in process_ecn

The process_ecn intends to return a bool value. However it is doing
so incorrectly by ANDing the fecn mask. The fecn bit is bit 31. Bool is
not a native data type and is up to the compiler to implement how it
sees fit. It is conceivable that this upper bit gets washed out.

Fix by converting to a bool properly.

Cc: stable@vger.kernel.org
Fixes: Commit fd2b562edca6 ("IB/hfi1: Pull FECN/BECN processing to a common place")
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/hfi: Protect against writable mmap

The device/port status is not intended to be changed from user space.
Prevent a user from mapping them as write or execute.

Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/hfi1: Fix unbalanced braces around else

Add missing braces around else blocks in a few places to make checkpatch
happy.

Fixes: 7724105686e7 ("IB/hfi1: add driver files")
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/hfi1: Convert %Lx to %llx

According to checkpatch %Lx is not standard C so remove it and use the
suggested %llx.

Fixes: 7724105686e7 ("IB/hfi1: add driver files")
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/hfi1: Fix misspelling in comment

Checkpatch flagged a misspelled word. Fix it.

Fixes: 8764522e5251 ("staging/rdma/hfi1: Unexpected link up pkey values are not an error")
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/hfi1: Permanently enable P_Key checking in HFI

Ingress and egress port P_Key checking should always be performed for
HFIs. This patch will enable ingress and egress P_Key checking when
the port is initialized and will ignore the P_Key information sent by
the FM in the port info structure which is meant to be used only by the
switch.

Reviewed-by: Easwar Hariharan <easwar.hariharan@intel.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Neel Desai <neel.desai@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/hfi1: Cache neighbor secure data after link up

Secure data is transferred across the link during verify
cap. This includes Neighbor Guid, Type, and Port Number.
This transfer is not guaranteed to complete until the 8051
firmware has completed processing of the state_complete
frame. Move the consumption of this data from verify cap
handling to link up handling to ensure the data is finalized.

Additionally, do not notify the SM that the link is up until
after this data is actually available.

Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Easwar Hariharan <easwar.hariharan@intel.com>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Stuart Summers <john.s.summers@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/hfi1: Adjust high temperature warning for QSFP cable

When we receive a QSFP_HIGH_TEMP_ALARM or QSFP_HIGH_TEMP_WARNING
interrupt, print a "QSFP cable temperature too high" message.

Reviewed-by: Easwar Hariharan <easwar.hariharan@intel.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Neel Desai <neel.desai@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/hfi1: Fix softlockup issue

Soft lockups can occur because the mad processing on different CPUs acquire
the spin lock dc8051_lock:

[534552.835870]  [<ffffffffa026f993>] ? read_dev_port_cntr.isra.37+0x23/0x160 [hfi1]
[534552.835880]  [<ffffffffa02775af>] read_dev_cntr+0x4f/0x60 [hfi1]
[534552.835893]  [<ffffffffa028d7cd>] pma_get_opa_portstatus+0x64d/0x8c0 [hfi1]
[534552.835904]  [<ffffffffa0290e7d>] hfi1_process_mad+0x48d/0x18c0 [hfi1]
[534552.835908]  [<ffffffff811dc1f1>] ? __slab_free+0x81/0x2f0
[534552.835936]  [<ffffffffa024c34e>] ? ib_mad_recv_done+0x21e/0xa30 [ib_core]
[534552.835939]  [<ffffffff811dd153>] ? __kmalloc+0x1f3/0x240
[534552.835947]  [<ffffffffa024c3fb>] ib_mad_recv_done+0x2cb/0xa30 [ib_core]
[534552.835955]  [<ffffffffa0237c85>] __ib_process_cq+0x55/0xd0 [ib_core]
[534552.835962]  [<ffffffffa0237d70>] ib_cq_poll_work+0x20/0x60 [ib_core]
[534552.835964]  [<ffffffff810a7f3b>] process_one_work+0x17b/0x470
[534552.835966]  [<ffffffff810a8d76>] worker_thread+0x126/0x410
[534552.835969]  [<ffffffff810a8c50>] ? rescuer_thread+0x460/0x460
[534552.835971]  [<ffffffff810b052f>] kthread+0xcf/0xe0
[534552.835974]  [<ffffffff810b0460>] ? kthread_create_on_node+0x140/0x140
[534552.835977]  [<ffffffff81696418>] ret_from_fork+0x58/0x90
[534552.835980]  [<ffffffff810b0460>] ? kthread_create_on_node+0x140/0x140

This issue is made worse when the 8051 is busy and the reads take longer.
Fix by using a non-spinning lock procure.

Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Reviewed-by: Mike Marciszyn <mike.marciniszyn@intel.com>
Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/hfi1: Prevent kernel QP post send hard lockups

The driver progress routines can call cond_resched() when
a timeslice is exhausted and irqs are enabled.

If the ULP had been holding a spin lock without disabling irqs and
the post send directly called the progress routine, the cond_resched()
could yield allowing another thread from the same ULP to deadlock
on that same lock.

Correct by replacing the current hfi1_do_send() calldown with a unique
one for post send and adding an argument to hfi1_do_send() to indicate
that the send engine is running in a thread.   If the routine is not
running in a thread, avoid calling cond_resched().

CC: <stable@vger.kernel.org> # 4.7.x-
Fixes: Commit 831464ce4b74 ("IB/hfi1: Don't call cond_resched in atomic mode when sending packets")
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/hfi1: Use defines from common headers

Move FECN and BECN related defines to common header files

Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Don Hiatt <don.hiatt@intel.com>
Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/hfi1: Add functions to parse 9B headers

These inline functions improve code readability by
enabling callers to read specific fields from the
header without knowledge of byte offsets.

Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Don Hiatt <don.hiatt@intel.com>
Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/hfi1: Rename hdr2sc to hfi1_9B_get_sc5

The function really returned the 5-bit sc value from
the header and rhf. hdr2sc didn't quite describe what it did.

Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: Don Hiatt <don.hiatt@intel.com>
Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/hfi1: Return SC2VL mappings to FM with VL15 instead of ILLEGAL_VL

VL15 in the SC2VL table is used to indicate an invalid SC
for the FM, however, internally the driver remaps SCs from
VL15 to ILLEGAL_VL to prevent error counts. This mapping
confuses the FM when performing a sweep, making it return
a table mismatch error. Have SMA convert ILLEGAL_VL
to VL15 entries for the SC2VL table queries.

Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Sebastian Sanchez <sebastian.sanchez@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/hfi1: Validate the TID count before using it

Improve the safety of the code by validating the user supplied
tidcnt before use.

Reviewed-by: Mitko Haralanov <mitko.haralanov@intel.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/rdmavt/hfi1/qib: Use the MGID and MLID for multicast addressing

The Infiniband spec defines "A multicast address is defined by a
MGID and a MLID" (section 10.5).

The current code only uses the MGID for identifying multicast groups.
Update the driver to be compliant with this definition.

Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/core: For multicast functions, verify that LIDs are multicast LIDs

The Infiniband spec defines "A multicast address is defined by a
MGID and a MLID" (section 10.5).  Currently the MLID value is not
validated.

Add check to verify that the MLID value is in the correct address
range.

Fixes: 0c33aeedb2cf ("[IB] Add checks to multicast attach and detach")
Cc: stable@vger.kernel.org
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/hfi1: Correct MulticastMask/CollectiveMask info to SMA output

The FM uses the values of MulticastMask and CollectiveMask to
determine the number of bits for net masks. The current values of
0 and 0 are incorrect.  The values should be 4 and 1.  Updated the
necessary code to reflect the specified values.

Reviewed-by: Sebastian Sanchez <sebastian.sanchez@intel.com>
Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/core: If the MGID/MLID pair is not on the list return an error

A list of MGID/MLID pairs is built when doing a multicast attach.  When
the multicast detach is called, the list is searched, and regardless of
the search outcome, the driver detach is called.

If an MGID/MLID pair is not on the list, driver detach should not be
called, and an error should be returned.  Calling the driver without
removing an MGID/MLID pair from the list can leave the core and driver
out of sync.

Fixes: f4e401562c11 ("IB/uverbs: track multicast group membership for userspace QPs")
Cc: stable@vger.kernel.org
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/qib: use setup_timer

Use setup_timer() instead of init_timer() to simplify the code.

Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/nes: use setup_timer

Use setup_timer() instead of init_timer() to simplify the code.

Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/i40iw: use setup_timer

Use setup_timer() instead of init_timer() to simplify the code.

Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/nes: Fix incorrect type in assignment

Fix mismatch between types, wqe_words are in le32 format, while opcode
in CPU format.

The following sparse warnings are helped to find it:

drivers/infiniband/hw/nes/nes_hw.c:3058:24: warning: incorrect type in assignment (different base types)
drivers/infiniband/hw/nes/nes_hw.c:3058:24:    expected unsigned int [unsigned] [assigned] [usertype] opcode
drivers/infiniband/hw/nes/nes_hw.c:3058:24:    got restricted __le32 <noident>

CC: Faisal Latif <faisal.latif@intel.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/usnic: Simplify the code to balance loc/unlock calls

Simplify code in find_free_vf_and_create_qp_grp() to avoid sparse error
regarding call to unlock in the block other than lock was called.

drivers/infiniband/hw/usnic/usnic_ib_verbs.c:206:9: warning: context imbalance
in 'find_free_vf_and_create_qp_grp' - different lock
contexts for basic block

CC: Christian Benvenuti <benve@cisco.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>

Ib/usnic: Explicitly include usnic headers

Sparse tool complains about undeclared symbols in usnic_ib_verbs.c
and usnic_ib_sysfs.c This is caused by lack of direct include of
appropriate usnic_ib_verbs.h and usnic_ib_sysfs.h, where all
these functions were declared.

Simple include eliminates 30 warnings similar to the below one:

drivers/infiniband/hw/usnic/usnic_ib_sysfs.c:304:6: warning: symbol
'usnic_ib_sysfs_unregister_usdev' was
not declared. Should it be static?

CC: Christian Benvenuti <benve@cisco.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>

Ib/core: Mark local uverbs_std_types functions to be static

Functions declared in uverbs_std_types.c are local to that file, but
they lack static declarations. This produces a lot of sparse warnings,
like the one below:

drivers/infiniband/core/uverbs_std_types.c:41:5: warning: symbol
'uverbs_free_ah' was not declared.
Should it be static?

So mark them as static.

CC: Matan Barak <matanb@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>

iw_cxgb4: check return value of alloc_skb

Function alloc_skb() will return a NULL pointer when there is no enough
memory. However, the return value of alloc_skb() is directly used
without validation in function send_fw_pass_open_req(). This patches
checks the return value of alloc_skb() against NULL.

Signed-off-by: Pan Bian <bianpan2016@163.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/rxe: fix typo: "algorithmi" -> "algorithm"

trivial fix to typo in pr_err message

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/rdmavt: restore IRQs on error path in rvt_create_ah()

We need to call spin_unlock_irqrestore() instead of vanilla
spin_unlock() on this error path.

Fixes: 119a8e708d16 ("IB/rdmavt: Add AH to rdmavt")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Acked-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

infiniband: call ipv6 route lookup via the stub interface

The infiniband address handle can be triggered to resolve an ipv6
address in response to MAD packets, regardless of the ipv6
module being disabled via the kernel command line argument.

That will cause a call into the ipv6 routing code, which is not
initialized, and a conseguent oops.

This commit addresses the above issue replacing the direct lookup
call with an indirect one via the ipv6 stub, which is properly
initialized according to the ipv6 status (e.g. if ipv6 is
disabled, the routing lookup fails gracefully)

Cc: stable@vger.kernel.org # 3.12+
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

RDMA/qedr: add support for send+invalidate in poll CQ

Split the poll responder CQ into two functions.
Add support for send+invalidate in poll CQ.

Signed-off-by: Ram Amrani <Ram.Amrani@cavium.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

RDMA/qedr: destroy CQ only after HW releases it

Wait for all relevant CNQ interrupts before freeing the CQ.
Don't invoke completion handlers for a destroyed CQ.

Signed-off-by: Ram Amrani <Ram.Amrani@cavium.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

RDMA/qedr: enhance destroy flow for GSI QP

Avoid attempting to release irrelevant (and unused) resources for GSI QP.

Signed-off-by: Ram Amrani <Ram.Amrani@cavium.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

RDMA/qedr: properly check atomic capabilities

After checking the path upwards towards root complex, actualy check
root complex atomic_req capability, and not our own NIC.
Verify that the PCIe device control register's atomic egress block
is cleared in the path.
Verify that the PCIe version is at least 2.

Signed-off-by: Ram Amrani <Ram.Amrani@cavium.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

RDMA/qedr: reset access control when registering a MR

Signed-off-by: Ram Amrani <Ram.Amrani@cavium.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/vmw_pvrdma: Spare annotate imm_data

imm_data is copied directly from the ib_send_wr and ib_wc which have
it marked as __be32, copy that mark into the uapi structures as well.

Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Tested-by: Adit Ranadive <aditr@vmware.com>
Acked-by: Adit Ranadive <aditr@vmware.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/mlx5: Add ODP support to MW

Internally MW implemented as KLM MKey and filled by userspace UMR
postsends.  Handle pagefault trigered by operations on this MKeys.

Signed-off-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/mlx5: Extract page fault code

To make page fault handling code more flexible
split pagefault_single_data_segment() function.
Keep MR resolution in pagefault_single_data_segment() and
move actual updates into pagefault_single_mr().

Signed-off-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/umem: Add support to huge ODP

Add IB_ACCESS_HUGETLB ib_reg_mr flag.
Hugetlb region registered with this flag
will use single translation entry per huge page.

Signed-off-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/mlx5: Add contiguous ODP support

Currenlty ODP supports only regular MMU pages.
Add ODP support for regions consisting of physically contiguous chunks
of arbitrary order (huge pages for instance) to improve performance.

Signed-off-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/umem: Add contiguous ODP support

Currenlty ODP supports only regular MMU pages.
Add ODP support for regions consisting of physically contiguous chunks
of arbitrary order (huge pages for instance) to improve performance.

Signed-off-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/mlx5: Decrease verbosity level of ODP errors

Decrease verbosity level of ODP error flows messages to debug level.
Remove one redundant print since debug level message already exists in
this flow.

Fixes: d9aaed838765 ('{net,IB}/mlx5: Refactor page fault handling')
Signed-off-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/mlx5: Fix implicit MR GC

When implicit MR's leaf MKey becomes unused, i.e. when it's
last page being released my MMU invalidation it is marked as "dying"
and scheduled for release by garbage collector.
Currentle consequent page fault may remove "dying" flag.
Treat leaf MKey as non-existent once it was scheduled to removal
by GC.

Fixes: 81713d3788d2 ('IB/mlx5: Add implicit MR support')
Signed-off-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/mlx5: Fix UMR size calculation

Translation table updates of large UMR may require multiple post send
operations. The last operations can be in various lengths, but current
code set them to be the same length.

Fixes: 7d0cc6edcc70 ('IB/mlx5: Add MR cache for large UMR regions')
Signed-off-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/mlx5: Fix function updating xlt emergency path

In memory shortage path we fall back to use spare buffer.
mlx5_ib_update_xlt() called from ib_uverbs_reg_mr when ibmr.ucontext
not initialized yet.

Scenario how to test it:
1. trigger memory exhaustion so __get_free_pages(GFP_KERNEL, 4) will fail
2. register MR
3. there should be no kernel oops

Fixes: 7d0cc6edcc70 ('IB/mlx5: Add MR cache for large UMR regions')
Signed-off-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB: Replace ib_umem page_size by page_shift

Size of pages are held by struct ib_umem in page_size field.

It is better to store it as an exponent, because page size by nature
is always power-of-two and used as a factor, divisor or ilog2's argument.

The conversion of page_size to be page_shift allows to have portable
code and avoid following error while compiling on ARM:

  ERROR: "__aeabi_uldivmod" [drivers/infiniband/core/ib_core.ko] undefined!

CC: Selvin Xavier <selvin.xavier@broadcom.com>
CC: Steve Wise <swise@chelsio.com>
CC: Lijun Ou <oulijun@huawei.com>
CC: Shiraz Saleem <shiraz.saleem@intel.com>
CC: Adit Ranadive <aditr@vmware.com>
CC: Dennis Dalessandro <dennis.dalessandro@intel.com>
CC: Ram Amrani <Ram.Amrani@Cavium.com>
Signed-off-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Acked-by: Ram Amrani <Ram.Amrani@cavium.com>
Acked-by: Shiraz Saleem <shiraz.saleem@intel.com>
Acked-by: Selvin Xavier <selvin.xavier@broadcom.com>
Acked-by: Selvin Xavier <selvin.xavier@broadcom.com>
Acked-by: Adit Ranadive <aditr@vmware.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/core: change the return type to void

The function ib_unregister_mad_agent always returns zero. And
this returned value is not checked. As such, chane the return
type to void.

CC: Joe Jin <joe.jin@oracle.com>
CC: Junxiao Bi <junxiao.bi@oracle.com>
Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com>
Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com>
Reviewed-by: Hal Rosenstock <hal@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

MAINTAINERS: Update ocrdma module status

Since ocrdma driver is not going to be updated with any
new development activity, except for critical bug fixes
reported by partners or customers, changing the module status
to "Odd Fixes". Also, updating the web page info and the
maintainers email addresses.

Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/hfi: Fix up comments in engine mapping

Fix off by 1 error in comments documenting the sdma and send context
mappings.

Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

MAINTAINERS: Add file patterns for infiniband device tree bindings

Submitters of device tree binding documentation may forget to CC
the subsystem maintainer if this is missing.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Sean Hefty <sean.hefty@intel.com>
Cc: Hal Rosenstock <hal.rosenstock@gmail.com>
Cc: linux-rdma@vger.kernel.org
Acked-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

infiniband/uverbs: Fix integer overflows

The 'num_sge' variable is verfied to be smaller than the 'sge_count'
variable; however, since both are user-controlled it's possible to cause
an integer overflow for the kmalloc multiply on 32-bit platforms
(num_sge and sge_count are both defined u32). By crafting an input that
causes a smaller-than-expected allocation it's possible to write
controlled data out-of-bounds.

Signed-off-by: Vlad Tsyrklevich <vlad@tsyrklevich.net>
Signed-off-by: Doug Ledford <dledford@redhat.com>

infiniband: hns: avoid gcc-7.0.1 warning for uninitialized data

hns_roce_v1_cq_set_ci() calls roce_set_bit() on an uninitialized field,
which will then change only a few of its bits, causing a warning with
the latest gcc:

infiniband/hw/hns/hns_roce_hw_v1.c: In function 'hns_roce_v1_cq_set_ci':
infiniband/hw/hns/hns_roce_hw_v1.c:1854:23: error: 'doorbell[1]' is used uninitialized in this function [-Werror=uninitialized]
  roce_set_bit(doorbell[1], ROCEE_DB_OTHERS_H_ROCEE_DB_OTH_HW_SYNS_S, 1);

The code is actually correct since we always set all bits of the
port_vlan field, but gcc correctly points out that the first
access does contain uninitialized data.

This initializes the field to zero first before setting the
individual bits.

Fixes: 9a4435375cd1 ("IB/hns: Add driver files for hns RoCE driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/fmr_pool: Convert the cleanup thread into kthread worker API

Kthreads are currently implemented as an infinite loop. Each
has its own variant of checks for terminating, freezing,
awakening. In many cases it is unclear to say in which state
it is and sometimes it is done a wrong way.

The plan is to convert kthreads into kthread_worker or workqueues
API. It allows to split the functionality into separate operations.
It helps to make a better structure. Also it defines a clean state
where no locks are taken, IRQs blocked, the kthread might sleep
or even be safely migrated.

The kthread worker API is useful when we want to have a dedicated
single thread for the work. It helps to make sure that it is
available when needed. Also it allows a better control, e.g.
define a scheduling priority.

This patch converts the frm_pool kthread into the kthread worker
API because I am not sure how busy the thread is. It is well
possible that it does not need a dedicated kthread and workqueues
would be perfectly fine. Well, the conversion between kthread
worker API and workqueues is pretty trivial.

The patch moves one iteration from the kthread into the work function.
It is queued only when there is a pending work. Therefore we do not
need to compare flush_ser and req_ser at the beginning. On the contrary,
the same work could be queued only once at a time. Therefore it has to
re-queue itself if some requests are pending.

Otherwise, wake_up_process() is replaced by queuing the work.

Important: The change is only compile tested. I did not find an easy
way how to check it in a real life.

Signed-off-by: Petr Mladek <pmladek@suse.com>
TO: Doug Ledford <dledford@redhat.com>
CC: Sean Hefty <sean.hefty@intel.com>
CC: Hal Rosenstock <hal.rosenstock@gmail.com>
CC: linux-rdma@vger.kernel.org
Signed-off-by: Doug Ledford <dledford@redhat.com>

{net,IB}/{rxe,usnic}: Utilize generic mac to eui32 function

This logic seems to be duplicated in (at least) three separate files.
Move it to one place so code can be re-use.

Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>

IB/usnic: Remove unused functions

Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/iser: fix spelling mistake: "unexepected" -> "unexpected"

trivial fix to spelling mistake in iser_err error message

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Acked-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Doug Ledford <dledford@redhat.com>

iw_cxgb4: Use dsgl by default

Enable the use of dsgl by default and determine whether dsgl is
supported from lld info.

Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Bharat Potnuri <bharat@chelsio.com>
Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>