ocfs2: silence a compile warning in dlm_alloc_pagevec()

Reported by Andrew Morton.

Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>

[PATCH] ocfs2: Alloc at least a page for the DLM hash

The OCFS2 DLM allocates a number of pages for a hash to lookup locks.
There was a bug where a PAGE_SIZE bigger than the hash size (eg, 64K
pages) would result in zero pages allocated.

Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>

ocfs2: allocate lockres hash pages in an array

This allows us to have a hash table greater than a single page which greatly
improves dlm performance on some tests.

Signed-off-by: Daniel Phillips <phillips@google.com>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>

ocfs2: inline dlm_lockres_get()

It's called on every lookup so this might help performance a bit.

Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>

[PATCH] Clean up ocfs2 hash probe and make it faster

Signed-Off-By: Daniel Phillips <phillips@google.com>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>

ocfs2: calculate lockid hash values outside of the spinlock

Fixes a performance bug - pointed out by Andrew.

Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>

ocfs2: move lockres qstr next to hlist_node structure

Gains us a bit of performance on loads which heavily hit the lockres hash.
Patch suggested by Daniel Phillips <phillips@google.com>.

Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>

Merge git://git./linux/kernel/git/bunk/trivial

* git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivial:
  typo fixes
  Clean up 'inline is not at beginning' warnings for usb storage
  Storage class should be first
  i386: Trivial typo fixes
  ixj: make ixj_set_tone_off() static
  spelling fixes
  fix paniced->panicked typos
  Spelling fixes for Documentation/atomic_ops.txt
  move acknowledgment for Mark Adler to CREDITS
  remove the bouncing email address of David Campbell

[PATCH] fix processing of the last byte in isdn_readbchan_tty()

The changes in the tty handling contain a bug while accessing
the last byte in the skb. Since special sequence for control of
DTMF and FAX via ttyI* devices handled via this path, these services
do not work anymore.

Signed-off-by: Karsten Keil <kkeil@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] Array overrun in drivers/infiniband/core/cma.c

This was spotted by coverity #id 1300.  Since the array has only four
elements, we should just use those four.

Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de>
Acked-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Revert "[PATCH] kthread: update loop.c to use kthread"

This reverts commit c7b2eff059fcc2d1b7085ee3d84b79fd657a537b.

Hugh Dickins explains:

 "It seems too little tested: "losetup -d /dev/loop0" fails with
  EINVAL because nothing sets lo_thread; but even when you patch
  loop_thread() to set lo->lo_thread = current, it can't survive
  more than a few dozen iterations of the loop below (with a tmpfs
  mounted on /tst):

j=0
cp /dev/zero /tst
while :
do
    let j=j+1
    echo "Doing pass $j"
    losetup /dev/loop0 /tst/zero
    mkfs -t ext2 -b 1024 /dev/loop0 >/dev/null 2>&1
    mount -t ext2 /dev/loop0 /mnt
    umount /mnt
    losetup -d /dev/loop0
done

  it collapses with failed ioctl then BUG_ON(!bio).

  I think the original lo_done completion was more subtle and safe
  than the kthread conversion has allowed for."

Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Merge git://git./linux/kernel/git/sam/kbuild

* git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild: (40 commits)
  kbuild: trivial fixes in Makefile
  kbuild: adding symbols in Kconfig and defconfig to TAGS
  kbuild: replace abort() with exit(1)
  kbuild: support for %.symtypes files
  kbuild: fix silentoldconfig recursion
  kbuild: add option for stripping modules while installing them
  kbuild: kill some false positives from modpost
  kbuild: export-symbol usage report generator
  kbuild: fix make -rR breakage
  kbuild: append -dirty for updated but uncommited changes
  kbuild: append git revision for all untagged commits
  kbuild: fix module.symvers parsing in modpost
  kbuild: ignore make's built-in rules & variables
  kbuild: bugfix with initramfs
  kbuild: modpost build fix
  kbuild: check license compatibility when building modules
  kbuild: export-type enhancement to modpost.c
  kbuild: add dependency on kernel.release to the package targets
  kbuild: `make kernelrelease' speedup
  kconfig: KCONFIG_OVERWRITECONFIG
  ...

Merge /pub/scm/linux/kernel/git/herbert/crypto-2.6

* master.kernel.org:/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  [CRYPTO] tcrypt: Forbid tcrypt from being built-in
  [CRYPTO] aes: Add wrappers for assembly routines
  [CRYPTO] tcrypt: Speed benchmark support for digest algorithms
  [CRYPTO] tcrypt: Return -EAGAIN from module_init()
  [CRYPTO] api: Allow replacement when registering new algorithms
  [CRYPTO] api: Removed const from cra_name/cra_driver_name
  [CRYPTO] api: Added cra_init/cra_exit
  [CRYPTO] api: Fixed incorrect passing of context instead of tfm
  [CRYPTO] padlock: Rearrange context structure to reduce code size
  [CRYPTO] all: Pass tfm instead of ctx to algorithms
  [CRYPTO] digest: Remove unnecessary zeroing during init
  [CRYPTO] aes-i586: Get rid of useless function wrappers
  [CRYPTO] digest: Add alignment handling
  [CRYPTO] khazad: Use 32-bit reads on key

Merge /pub/scm/linux/kernel/git/dtor/input

* master.kernel.org:/pub/scm/linux/kernel/git/dtor/input:
  Input: iforce - remove some pointless casts
  Input: psmouse - add support for Intellimouse 4.0
  Input: atkbd - fix HANGEUL/HANJA keys
  Input: fix misspelling of Hangeul key
  Input: via-pmu - add input device support
  Input: rearrange exports
  Input: fix formatting to better follow CodingStyle
  Input: reset name, phys and uniq when unregistering
  Input: return correct size when reading modalias attribute
  Input: change my e-mail address in MAINTAINERS file
  Input: fix potential overflows in driver/input/keyboard
  Input: fix potential overflows in driver/input/touchscreen
  Input: fix potential overflows in driver/input/joystick
  Input: fix potential overflows in driver/input/mouse
  Input: fix accuracy of fixp-arith.h
  Input: iforce - use ENOSPC instead of ENOMEM
  Input: constify drivers/char/keyboard.c

[PATCH] m68knommu: use configurable RAM setup page_offset.h

Remove board specific base RAM conditionals from page_offset.h
With the Kconfig time configurable RAM setup none of this is required.
It is all based on the Kconfig (CONFIG_RAMBASE) option now.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] m68knommu: use configurable RAM setup in start up code

Change to using a configurable RAM setup in startup code. This cleans up
the whole RAM base/sizing issue, and removes a lot of board specific code.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] m68knommu: use configurable RAM setup in linker script

Remove the fixed RAM configurations for each board type from the
linker script. Replace with simple defines usng the flexible RAM
configuration options. This cleans out of lot of board specific
munging of addresses.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] m68knommu: create configurable RAM setup

Reworked the way RAM regions are defined. Instead of coding all the
variations for each board type we now just configure RAM base and size
in the usual Kconfig setup. This much simplifies the code, and makes it
a lot more flexible when setting up new boards or board varients.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] m68knommu: remove unused vars from generic 68328 start code

Clean out unused variable definitions from 68328 start up code.
Also use a more appropriate start address for the case of relocating
the kernel code to RAM (from ROM/flash).

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] m68knommu: remove __ramvec from 68328/pilot start code

__ramvec has been removed from the linker script. The vector base
address is defined as a configurable option, use that. Remove its
use from the 68328/pilot startup code.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Merge /pub/scm/linux/kernel/git/mchehab/v4l-dvb

* master.kernel.org:/pub/scm/linux/kernel/git/mchehab/v4l-dvb:
  V4L/DVB (4227): Update this driver for recent header file movement.
  V4L/DVB (4223): Add V4L2_CID_MPEG_STREAM_VBI_FMT control
  V4L/DVB (4222): Always switch tuner mode when calling VIDIOC_S_FREQUENCY.
  V4L/DVB (4221): Add HM12 YUV format define.
  V4L/DVB (4219): Av7110: analog sound output of DVB-C rev 2.3
  V4L/DVB (4217): Fix a misplaced closing bracket/else, which caused swzigzag not to be called
  V4L/DVB (4215): Make VIDEO_CX88_BLACKBIRD a separate build option
  V4L/DVB (4214): Make VIDEO_CX2341X a selectable build option
  V4L/DVB (4213): Cx88: cleanups
  V4L/DVB (4211): Fix an Oops for all fe that have get_frontend_algo == NULL

Merge branch 'x86-64'

* x86-64: (83 commits)
  [PATCH] x86_64: x86_64 stack usage debugging
  [PATCH] x86_64: (resend) x86_64 stack overflow debugging
  [PATCH] x86_64: msi_apic.c build fix
  [PATCH] x86_64: i386/x86-64 Add nmi watchdog support for new Intel CPUs
  [PATCH] x86_64: Avoid broadcasting NMI IPIs
  [PATCH] x86_64: fix apic error on bootup
  [PATCH] x86_64: enlarge window for stack growth
  [PATCH] x86_64: Minor string functions optimizations
  [PATCH] x86_64: Move export symbols to their C functions
  [PATCH] x86_64: Standardize i386/x86_64 handling of NMI_VECTOR
  [PATCH] x86_64: Fix modular pc speaker
  [PATCH] x86_64: remove sys32_ni_syscall()
  [PATCH] x86_64: Do not use -ffunction-sections for modules
  [PATCH] x86_64: Add cpu_relax to apic_wait_icr_idle
  [PATCH] x86_64: adjust kstack_depth_to_print default
  [PATCH] i386/x86-64: adjust /proc/interrupts column headings
  [PATCH] x86_64: Fix race in cpu_local_* on preemptible kernels
  [PATCH] x86_64: Fix fast check in safe_smp_processor_id
  [PATCH] x86_64: x86_64 setup.c - printing cmp related boottime information
  [PATCH] i386/x86-64/ia64: Move polling flag into thread_info_status
  ...

Manual resolve of trivial conflict in arch/i386/kernel/Makefile

[PATCH] x86_64: x86_64 stack usage debugging

Applies to git & 2.6.17-rc6 after CONFIG_DEBUG_STACKOVERFLOW patch

uses same stack-zeroing mechanism as on i386 to discover maximum stack
excursions.

Signed-off-by: Eric Sandeen <sandeen@sgi.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] x86_64: (resend) x86_64 stack overflow debugging

Take two, now without spurious whitespace :(  Applies to git & 2.6.17-rc6

CONFIG_DEBUG_STACKOVERFLOW existed for x86_64 in 2.4, but seems to have gone AWOL in 2.6.

I've pretty much just copied this over from the 2.4 code, with
appropriate tweaks for the 2.6 kernel, plus a bugfix.  I'd personally
rather see it printed out the way other arches do it, i.e.
bytes-remaining-until-overflow, rather than having to do the subtraction
yourself.  Also, only 128 bytes remaining seems awfully late to issue a
warning.  But I'll start here :)

Signed-off-by: Eric Sandeen <sandeen@sgi.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] x86_64: msi_apic.c build fix

      CC      drivers/pci/msi-apic.o
In file included from include/asm/msi.h:11,
                  from drivers/pci/msi.h:71,
                  from drivers/pci/msi-apic.c:8:
include/asm/smp.h:103: error: syntax error before '->' token

akpm: nasty.  It appears to be

  static inline unsigned int cpu_mask_to_apicid(cpumask_t cpumask)

conflicting with include/asm-x86_64/mach_apic.h's

  #define cpu_mask_to_apicid (genapic->cpu_mask_to_apicid)

And I don't know which patch in rc4-mm1 triggered this.

Fixing this in the .c file seems wrong.

Including asm/smp.h instead of linux/smp.h seems wrong too.  Need that
.config.

Cc: Andi Kleen <ak@muc.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] x86_64: i386/x86-64 Add nmi watchdog support for new Intel CPUs

Intel now has support for Architectural Performance Monitoring Counters
( Refer to IA-32 Intel Architecture Software Developer's Manual
http://www.intel.com/design/pentium4/manuals/253669.htm ). This
feature is present starting from Intel Core Duo and Intel Core Solo processors.

What this means is, the performance monitoring counters and some performance
monitoring events are now defined in an architectural way (using cpuid).
And there will be no need to check for family/model etc for these architectural
events.

Below is the patch to use this performance counters in nmi watchdog driver.
Patch handles both i386 and x86-64 kernels.

Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] x86_64: Avoid broadcasting NMI IPIs

On some i386/x86_64 systems, sending an NMI IPI as a broadcast will
reset the system.  This seems to be a BIOS bug which affects machines
where one or more cpus are not under OS control.  It occurs on HT
systems with a version of the OS that is not compiled without HT
support.  It also occurs when a system is booted with max_cpus=n where
2 <= n < cpus known to the BIOS.  The fix is to always send NMI IPI as
a mask instead of as a broadcast.

Signed-off-by: Keith Owens <kaos@sgi.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] x86_64: fix apic error on bootup

Appended patch fixes the "APIC error on CPUX: 00(40)" observed during bootup.

From SDM Vol-3A "Valid Interrupt Vectors" section:
"When an illegal vector value (0-15) is written to an LVT entry
and the delivery mode is Fixed, the APIC may signal an illegal
vector error, with out regard to whether the mask bit is set
or whether an interrupt is actually seen on input."

Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] x86_64: enlarge window for stack growth

Allow stack growth so the 'enter' instruction works.  Also
fixes problem in compat_sys_kexec_load() which could allocate
more than 128 bytes using compat_alloc_user_space().

Signed-off-by: Chuck Ebbert <76306.1226@compuserve.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] x86_64: Minor string functions optimizations

 - Use tail call from clear_user to __clear_user to save some code size
 - Use standard memcpy for forward memmove

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] x86_64: Move export symbols to their C functions

Only exports for assembler files are left in x8664_ksyms.c

Originally inspired by a patch from Al Viro
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] x86_64: Standardize i386/x86_64 handling of NMI_VECTOR

x86_64 and i386 behave inconsistently when sending an IPI on vector 2
(NMI_VECTOR).  Make both behave the same, so IPI 2 is sent as NMI.

The crash code was abusing send_IPI_allbutself() by passing a code
instead of a vector, it only worked because crash knew about the
internal code of send_IPI_allbutself().  Change crash to use NMI_VECTOR
instead, and remove the comment about how crash was abusing the function.

This patch is a pre-requisite for fixing the problem where sending an
IPI as NMI would reboot some Dell Xeon systems.  I cannot fix that
problem while crash continus to abuse send_IPI_allbutself().

It also removes the inconsistency between i386 and x86_64 for
NMI_VECTOR.  That will simplify all the RAS code that needs to bring
all the cpus to a clean stop, even when one or more cpus are spinning
disabled.

Signed-off-by: Keith Owens <kaos@sgi.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] x86_64: Fix modular pc speaker

It turned out that the following change is needed when the speaker is
compiled as a module.

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] x86_64: remove sys32_ni_syscall()

This patch removes the no longer used sys32_ni_syscall()

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] x86_64: Do not use -ffunction-sections for modules

Currently CONFIG_REORDER uses -ffunction-sections for all code;
however, creating a separate section for each function is not useful
for modules and just adds bloat.  Moving this option from CFLAGS to
CFLAGS_KERNEL shrinks module object files (e.g., the module tree for a
kernel built with most drivers as modules shrinked from 54M to 46M),
and decreases the number of sysfs files in /sys/module/*/sections/
directories.

Signed-off-by: Sergey Vlasov <vsu@altlinux.ru>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] x86_64: Add cpu_relax to apic_wait_icr_idle

This one is adding a cpu_relax() that already existed in the i386 version.

Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] x86_64: adjust kstack_depth_to_print default

Defaulting to a value not evenly divisible by four makes little sense,
as four values are displayed per line (and hence the rest of the line
would otherwise be wasted).

Signed-off-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] i386/x86-64: adjust /proc/interrupts column headings

With (significantly) more than 10 CPUs online, the column headings
drifted off the positions of the column contents with growing CPU
numbers.

Signed-off-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] x86_64: Fix race in cpu_local_* on preemptible kernels

When a process changes CPUs while doing the non atomic cpu_local_*
operations it might operate on the local_t of a different CPUs.

Fix that by disabling preemption.

Pointed out by Christopher Lameter

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] x86_64: Fix fast check in safe_smp_processor_id

The APIC ID returned by hard_smp_processor_id can be beyond
NR_CPUS and then overflow the x86_cpu_to_apic[] array.

Add a check for overflow. If it happens then the slow loop below
will catch.

Bug pointed out by Doug Thompson

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] x86_64: x86_64 setup.c - printing cmp related boottime information

Getting phys_proc_id and cpu_core_id information to be printed at boot
time for AMD processors.  Also matching the Node related boot time
information that gets printed for Intel and AMD processors for NUMA
configurations.

Signed-off-by: Rohit Seth <rohitseth@google.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] i386/x86-64/ia64: Move polling flag into thread_info_status

During some profiling I noticed that default_idle causes a lot of
memory traffic. I think that is caused by the atomic operations
to clear/set the polling flag in thread_info. There is actually
no reason to make this atomic - only the idle thread does it
to itself, other CPUs only read it. So I moved it into ti->status.

Converted i386/x86-64/ia64 for now because that was the easiest
way to fix ACPI which also manipulates these flags in its idle
function.

Cc: Nick Piggin <npiggin@novell.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Len Brown <len.brown@intel.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] x86_64: Remove bogus RED-PEN comment in signal.c

No red zone possible/needed on the alternative stack.

It caused confusion.

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] x86_64: check_addr() cleanups

 - Use DMA_32BIT_MASK

 - Use %z for size_t

 - 80-cols

Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] x86_64: miscellaneous mm/init.c fixes

 - fix an off-by-one error in phys_pmd_init()
 - prevent phys_pmd_init() from removing mappings established earlier
 - fix the direct mapping early printk to in fact show the end of the range
 - remove an apparently orphan comment

Signed-off-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] x86_64: Mark mce_amd cpu notifier __cpuinit/__cpuinitdata

Cc: Jacob Shin <jacob.shin@amd.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] x86_64: mce_amd cleanup

Clean up mce_amd.c for readability and remove code no
longer needed.

Signed-off-by: Jacob Shin <jacob.shin@amd.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] x86_64: mce_amd support for family 0x10 processors

Add support for mce threshold registers found in future
AMD family 0x10 processors.  Backwards compatible with
family 0xF hardware.

AK: fixed build on !SMP

Signed-off-by: Jacob Shin <jacob.shin@amd.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] x86_64: mce_amd relocate sysfs files

Get rid of /sys/devices/system/threshold directory and move
mce_amd thresholding files into the machine sysfs directory --
/sys/devices/system/machinecheck.

AK: Fixed warning

Signed-off-by: Jacob Shin <jacob.shin@amd.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] x86_64: apic support for extended apic interrupt

Add support for extended APIC LVT found in future AMD processors.

Signed-off-by: Jacob Shin <jacob.shin@amd.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] x86_64: Move VM86 config into arch/i386/Kconfig

Architecture specific configs like this have no business at all
in init/Kconfig. This prevents it from being set on x86-64

Pointed out by H.Peter Anvin

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] i386/x86-64: Fix isoimage when syslinux is in /usr/share

It's like this on SUSE systems.

Cc: hpa@zytor.com
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] x86_64: Update copyright in time.c

Update my copyright dates in arch/x86-64/kernel/time.c

Signed-off-by: Vojtech Pavlik <vojtech@suse.cz>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] x86_64: Explain why HPET T0_CMP register is written twice

After writing the CFG register, the first value written to the T0_CMP
register is the value at which next interrupt should be triggered, every
value after that sets the period of the interrupt. For that reason, the code
needs to write the value twice - to set both the phase and period.

[AK: I had already figured it out by myself, but it's still useful
to have a comment for this.]

Signed-off-by: Vojtech Pavlik <vojtech@suse.cz>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] x86_64: Make use of the *PER* constants in time.c

This patch makes use of the newly added conversion constants
in time.h to x86-64 time.c. The code gets significantly easier
to understand.

Signed-off-by: Vojtech Pavlik <vojtech@suse.cz>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] x86_64: Remove hack to manually enable HPET on AMD8111 southbridges

Remove #ifdefed code to manually enable HPET on AMD8111, where the
BIOS doesn't have ACPI HPET tables and doesn't enable it for us.

Signed-off-by: Vojtech Pavlik <vojtech@suse.cz>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] x86_64: Add X86_FEATURE_RDTSCP, fix rdtscp in /proc/cpuinfo

This patch adds the X86_FEATURE_RDTSCP #define, so that kernel code can
check for the feature easily and also fixes the location of the "rdtscp"
string in the cpuinfo tables.

Signed-off-by: Vojtech Pavlik <vojtech@suse.cz>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] x86_64: Rename oem_force_hpet_timer to apic_is_clustered_box

Rename oem_force_hpet_timer to apic_is_clustered_box, to give the
function a better fitting name - it really isn't at all about HPET.

Signed-off-by: Vojtech Pavlik <vojtech@suse.cz>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] x86_64: Add useful constants to time.h

In timekeeping code, one often does need to use conversion constants. Naming
these leads to code that's easier to understand, showing the reader between
which units the conversion is made.

Signed-off-by: Vojtech Pavlik <vojtech@suse.cz>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] x86_64: moving phys_proc_id and cpu_core_id to cpuinfo_x86

Most of the fields of cpuinfo are defined in cpuinfo_x86 structure.
This patch moves the phys_proc_id and cpu_core_id for each processor to
cpuinfo_x86 structure as well.

Signed-off-by: Rohit Seth <rohitseth@google.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] x86_64: Calgary IOMMU - Calgary specific bits

This patch hooks Calgary into the build, the x86-64 IOMMU
initialization paths, and introduces the Calgary specific bits.  The
implementation draws inspiration from both PPC (which has support for
the same chip but requires firmware support which we don't have on
x86-64) and gart. Calgary is different from gart in that it support a
translation table per PHB, as opposed to the single gart aperture.

Changes from previous version:
 * Addition of boot-time disablement for bus-level translation/isolation
   (e.g, enable userspace DMA for things like X)
 * Usage of newer IOMMU abstraction functions

Signed-off-by: Muli Ben-Yehuda <muli@il.ibm.com>
Signed-off-by: Jon Mason <jdmason@us.ibm.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] x86_64: Calgary IOMMU - IOMMU abstractions

This patch creates a new interface for IOMMUs by adding a centralized
location for IOMMU allocation (for translation tables/apertures) and
IOMMU initialization.  In creating these, code was moved around for
abstraction, uniformity, and consiceness.

Take note of the move of the iommu_setup bootarg parsing code to
__setup.  This is enabled by moving back the location of the aperture
allocation/detection to mem init (which while ugly, was already the
location of the swiotlb_init).

While a slight departure from the previous patch, I belive this provides
the true intention of the previous versions of the patch which changed
this code.  It also makes the addition of the upcoming calgary code much
cleaner than previous patches.

[AK: Removed one broken change. iommu_setup still has to be called
early]

Signed-off-by: Muli Ben-Yehuda <muli@il.ibm.com>
Signed-off-by: Jon Mason <jdmason@us.ibm.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] x86_64: Calgary IOMMU - move valid_dma_direction into the callers

Based on Andi Kleen's comments on the original Calgary patch, move
valid_dma_direction into the calling functions.

Signed-off-by: Muli Ben-Yehuda <muli@il.ibm.com>
Signed-off-by: Jon Mason <jdmason@us.ibm.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] x86_64: Calgary IOMMU - introduce iommu_detected

swiotlb relies on the gart specific iommu_aperture variable to know if
we discovered a hardware IOMMU before swiotlb initialization.  Introduce
iommu_detected to do the same thing, but in a HW IOMMU neutral manner,
in preparation for adding the Calgary HW IOMMU.

Signed-Off-By: Muli Ben-Yehuda <muli@il.ibm.com>
Signed-Off-By: Jon Mason <jdmason@us.ibm.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] x86_64: Change assembly to use regular cpuid_count macro

Minor cleanup patch:

Replacing the asm statement with cpuid_count macro(which already
provides the same functionality).

Signed-off-by: Rohit Seth <rohitseth@google.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] x86_64: use halt() instead of raw inline assembly

Use abstractions whenever possible.

Signed-off-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] x86_64: Get rid of pud_offset_k / __pud_offset_k

pud_offset_k() equivalent to pud_offset() now.  Pointed out by Jan Beulich
Similar for __pud_offset_ok, which needs a small change in the callers.

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] i386/x86-64: Consolidate arch/{i386,x86_64}/boot/compressed/misc.c

Clean up arch/{i386,x86_64}/boot/compressed/misc.c a bit to reduce their
differences. Should have zero effect on code generation.

Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] x86_64: allow unwinder to build without module support

Add proper conditionals to be able to build with CONFIG_MODULES=n.

Signed-off-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] i386/x86-64: fall back to old-style call trace if no unwinding

If no unwinding is possible at all for a certain exception instance,
fall back to the old style call trace instead of not showing any trace
at all.

Also, allow setting the stack trace mode at the command line.

Signed-off-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] i386: reliable stack trace support i386 entry.S

To increase the usefulness of reliable stack unwinding, this adds CFI
unwind annotations to many low-level i386 routines.

Signed-off-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] i386: reliable stack trace support (i386)

These are the i386-specific pieces to enable reliable stack traces. This is
going to be even more useful once CFI annotations get added to he assembly
code, namely to entry.S.

Signed-off-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] x86_64: reliable stack trace support (x86-64 syscall

Adjust the CFA offset for 64- and 32-bit syscall entries so that the five
slots pre-subtracted from the stack pointer do not appear to reside outside
of the current frame.

Signed-off-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] x86_64: reliable stack trace support (x86-64 IRQ stack

Change the switching to/from the IRQ stack so that unwind annotations can
be added for it without requiring CFA expressions.

AK: I cleaned it up a bit, making it unconditional and removing the
obsolete DEBUG_INFO full frame code.

Signed-off-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] x86_64: reliable stack trace support (x86-64)

These are the x86_64-specific pieces to enable reliable stack traces. The
only restriction with this is that it currently cannot unwind across the
interrupt->normal stack boundary, as that transition is lacking proper
annotation.

Signed-off-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] x86_64: reliable stack trace support

These are the generic bits needed to enable reliable stack traces based
on Dwarf2-like (.eh_frame) unwind information. Subsequent patches will
enable x86-64 and i386 to make use of this.

Thanks to Andi Kleen and Ingo Molnar, who pointed out several possibilities
for improvement.

Signed-off-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] x86_64: x86_86 msi miss one entry handler

  In x86_64 architecture, if device driver with msi function
gets 0xee vector by assign_irq_vector() function, system will
crash if this interrupt happens. It is because 0xee interrupt
entry is empty. This patch modifies this. This patch is based
on 2.6.17-rc6.

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] x86_64: Rename IOMMU option, fix help and mark option embedded.

 - Rename the GART_IOMMU option to IOMMU to make clear it's not
   just for AMD
 - Rewrite the help text to better emphatise this fact
 - Make it an embedded option because too many people get it wrong.

To my astonishment I discovered the aacraid driver tests this
symbol directly. This looks quite broken to me - it's an internal
implementation detail of the PCI DMA API. Can the maintainer
please clarify what this test was intended to do?

Cc: linux-scsi@vger.kernel.org
Cc: alan@redhat.com
Cc: markh@osdl.org
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] x86_64: Make sure is_compat_task works early

Previously it would only work in the first 32bit system call, not during
early process setup.

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] x86_64: fix vector_lock deadlock in io_apic.c

Fix a potential deadlock scenario introduced by io_apic.c's new vector_lock
on i386 and x86_64.

Found by the locking correctness validator. The patch was boot-tested on
x86. For details of the deadlock scenario, see the validator output:

  ======================================================
  [ BUG: hard-safe -> hard-unsafe lock order detected! ]
  ------------------------------------------------------
  idle/1 [HC0[0]:SC0[0]:HE0:SE1] is trying to acquire:
   (msi_lock){....}, at: [<c04ff8d2>] startup_msi_irq_wo_maskbit+0x10/0x35

  and this task is already holding:
   (&irq_desc[i].lock){++..}, at: [<c015b924>] probe_irq_on+0x36/0x107
  which would create a new lock dependency:
   (&irq_desc[i].lock){++..} -> (msi_lock){....}

  but this new dependency connects a hard-irq-safe lock:
   (&irq_desc[i].lock){++..}
  ... which became hard-irq-safe at:
    [<c01468c4>] lockdep_acquire+0x68/0x84
    [<c10485e9>] _spin_lock+0x21/0x2f
    [<c015aff5>] __do_IRQ+0x3d/0x113
    [<c01062d3>] do_IRQ+0x8c/0xad

  to a hard-irq-unsafe lock:
   (vector_lock){--..}
  ... which became hard-irq-unsafe at:
  ...  [<c01468c4>] lockdep_acquire+0x68/0x84
    [<c10485e9>] _spin_lock+0x21/0x2f
    [<c011b5e8>] assign_irq_vector+0x34/0xc8
    [<c1aa82fa>] setup_IO_APIC+0x45a/0xcff
    [<c1aa56e3>] smp_prepare_cpus+0x5ea/0x8aa
    [<c010033f>] init+0x32/0x2cb
    [<c0102005>] kernel_thread_helper+0x5/0xb

  which could potentially lead to deadlocks!

  other info that might help us debug this:

  3 locks held by idle/1:
   #0:  (port_mutex){--..}, at: [<c067070d>] uart_add_one_port+0x61/0x289
   #1:  (&state->mutex){--..}, at: [<c067071f>] uart_add_one_port+0x73/0x289
   #2:  (&irq_desc[i].lock){++..}, at: [<c015b924>] probe_irq_on+0x36/0x107

  the hard-irq-safe lock's dependencies:
  -> (&irq_desc[i].lock){++..} ops: 9861 {
     initial-use  at:
                          [<c01468c4>] lockdep_acquire+0x68/0x84
                          [<c10487f4>] _spin_lock_irqsave+0x2a/0x3a
                          [<c015b415>] setup_irq+0x9b/0x14d
                          [<c1aaa4c4>] time_init_hook+0xf/0x11
                          [<c1a9f320>] time_init+0x44/0x46
                          [<c1a9955f>] start_kernel+0x191/0x38f
                          [<c0100210>] 0xc0100210
     in-hardirq-W at:
                          [<c01468c4>] lockdep_acquire+0x68/0x84
                          [<c10485e9>] _spin_lock+0x21/0x2f
                          [<c015aff5>] __do_IRQ+0x3d/0x113
                          [<c01062d3>] do_IRQ+0x8c/0xad
     in-softirq-W at:
                          [<c01468c4>] lockdep_acquire+0x68/0x84
                          [<c10485e9>] _spin_lock+0x21/0x2f
                          [<c015aff5>] __do_IRQ+0x3d/0x113
                          [<c01062d3>] do_IRQ+0x8c/0xad
   }
   ... key      at: [<c1ea31e0>] irq_desc_lock_type+0x0/0x20
    -> (i8259A_lock){++..} ops: 5149 {
       initial-use  at:
                        [<c01468c4>] lockdep_acquire+0x68/0x84
                        [<c10487f4>] _spin_lock_irqsave+0x2a/0x3a
                        [<c0108090>] init_8259A+0x11/0x8f
                        [<c1aa0d22>] init_ISA_irqs+0x12/0x4d
                        [<c1aaa4f0>] pre_intr_init_hook+0x8/0xa
                        [<c1aa0cb9>] init_IRQ+0xe/0x65
                        [<c1a99546>] start_kernel+0x178/0x38f
                        [<c0100210>] 0xc0100210
       in-hardirq-W at:
                        [<c01468c4>] lockdep_acquire+0x68/0x84
                        [<c10487f4>] _spin_lock_irqsave+0x2a/0x3a
                        [<c0107fb0>] mask_and_ack_8259A+0x1b/0xcc
                        [<c015b007>] __do_IRQ+0x4f/0x113
                        [<c01062d3>] do_IRQ+0x8c/0xad
       in-softirq-W at:
                        [<c01468c4>] lockdep_acquire+0x68/0x84
                        [<c10487f4>] _spin_lock_irqsave+0x2a/0x3a
                        [<c0107fb0>] mask_and_ack_8259A+0x1b/0xcc
                        [<c015b007>] __do_IRQ+0x4f/0x113
                        [<c01062d3>] do_IRQ+0x8c/0xad
     }
     ... key      at: [<c142f174>] i8259A_lock+0x14/0x40
   ... acquired at:
     [<c01468c4>] lockdep_acquire+0x68/0x84
     [<c10487f4>] _spin_lock_irqsave+0x2a/0x3a
     [<c0107eb2>] enable_8259A_irq+0x10/0x47
     [<c0107f12>] startup_8259A_irq+0x8/0xc
     [<c015b45e>] setup_irq+0xe4/0x14d
     [<c1aaa4c4>] time_init_hook+0xf/0x11
     [<c1a9f320>] time_init+0x44/0x46
     [<c1a9955f>] start_kernel+0x191/0x38f
     [<c0100210>] 0xc0100210

    -> (ioapic_lock){+...} ops: 122 {
       initial-use  at:
                        [<c01468c4>] lockdep_acquire+0x68/0x84
                        [<c10487f4>] _spin_lock_irqsave+0x2a/0x3a
                        [<c1aa71db>] io_apic_get_version+0x16/0x55
                        [<c1aa5c73>] mp_register_ioapic+0xc6/0x127
                        [<c1aa382e>] acpi_parse_ioapic+0x2d/0x39
                        [<c1abe031>] acpi_table_parse_madt_family+0xb4/0x100
                        [<c1abe093>] acpi_table_parse_madt+0x16/0x18
                        [<c1aa3c8a>] acpi_boot_init+0x132/0x251
                        [<c1aa08ea>] setup_arch+0xd36/0xe37
                        [<c1a99434>] start_kernel+0x66/0x38f
                        [<c0100210>] 0xc0100210
       in-hardirq-W at:
                        [<c01468c4>] lockdep_acquire+0x68/0x84
                        [<c10487f4>] _spin_lock_irqsave+0x2a/0x3a
                        [<c011bce1>] mask_IO_APIC_irq+0x11/0x31
                        [<c011c5cc>] ack_edge_ioapic_vector+0x31/0x41
                        [<c015b007>] __do_IRQ+0x4f/0x113
                        [<c01062d3>] do_IRQ+0x8c/0xad
     }
     ... key      at: [<c1432514>] ioapic_lock+0x14/0x3c
      -> (i8259A_lock){++..} ops: 5149 {
         initial-use  at:
                         [<c01468c4>] lockdep_acquire+0x68/0x84
                         [<c10487f4>] _spin_lock_irqsave+0x2a/0x3a
                         [<c0108090>] init_8259A+0x11/0x8f
                         [<c1aa0d22>] init_ISA_irqs+0x12/0x4d
                         [<c1aaa4f0>] pre_intr_init_hook+0x8/0xa
                         [<c1aa0cb9>] init_IRQ+0xe/0x65
                         [<c1a99546>] start_kernel+0x178/0x38f
                         [<c0100210>] 0xc0100210
         in-hardirq-W at:
                         [<c01468c4>] lockdep_acquire+0x68/0x84
                         [<c10487f4>] _spin_lock_irqsave+0x2a/0x3a
                         [<c0107fb0>] mask_and_ack_8259A+0x1b/0xcc
                         [<c015b007>] __do_IRQ+0x4f/0x113
                         [<c01062d3>] do_IRQ+0x8c/0xad
         in-softirq-W at:
                         [<c01468c4>] lockdep_acquire+0x68/0x84
                         [<c10487f4>] _spin_lock_irqsave+0x2a/0x3a
                         [<c0107fb0>] mask_and_ack_8259A+0x1b/0xcc
                         [<c015b007>] __do_IRQ+0x4f/0x113
                         [<c01062d3>] do_IRQ+0x8c/0xad
       }
       ... key      at: [<c142f174>] i8259A_lock+0x14/0x40
     ... acquired at:
     [<c01468c4>] lockdep_acquire+0x68/0x84
     [<c10487f4>] _spin_lock_irqsave+0x2a/0x3a
     [<c0107e6b>] disable_8259A_irq+0x10/0x47
     [<c011bdbd>] startup_edge_ioapic_vector+0x31/0x58
     [<c015b45e>] setup_irq+0xe4/0x14d
     [<c015b5a1>] request_irq+0xda/0xf9
     [<c1ac983a>] rtc_init+0x6a/0x1a7
     [<c0100457>] init+0x14a/0x2cb
     [<c0102005>] kernel_thread_helper+0x5/0xb

   ... acquired at:
     [<c01468c4>] lockdep_acquire+0x68/0x84
     [<c10487f4>] _spin_lock_irqsave+0x2a/0x3a
     [<c011bce1>] mask_IO_APIC_irq+0x11/0x31
     [<c011c5cc>] ack_edge_ioapic_vector+0x31/0x41
     [<c015b007>] __do_IRQ+0x4f/0x113
     [<c01062d3>] do_IRQ+0x8c/0xad

  the hard-irq-unsafe lock's dependencies:
  -> (vector_lock){--..} ops: 31 {
     initial-use  at:
                          [<c01468c4>] lockdep_acquire+0x68/0x84
                          [<c10485e9>] _spin_lock+0x21/0x2f
                          [<c011b5e8>] assign_irq_vector+0x34/0xc8
                          [<c1aa82fa>] setup_IO_APIC+0x45a/0xcff
                          [<c1aa56e3>] smp_prepare_cpus+0x5ea/0x8aa
                          [<c010033f>] init+0x32/0x2cb
                          [<c0102005>] kernel_thread_helper+0x5/0xb
     softirq-on-W at:
                          [<c01468c4>] lockdep_acquire+0x68/0x84
                          [<c10485e9>] _spin_lock+0x21/0x2f
                          [<c011b5e8>] assign_irq_vector+0x34/0xc8
                          [<c1aa82fa>] setup_IO_APIC+0x45a/0xcff
                          [<c1aa56e3>] smp_prepare_cpus+0x5ea/0x8aa
                          [<c010033f>] init+0x32/0x2cb
                          [<c0102005>] kernel_thread_helper+0x5/0xb
     hardirq-on-W at:
                          [<c01468c4>] lockdep_acquire+0x68/0x84
                          [<c10485e9>] _spin_lock+0x21/0x2f
                          [<c011b5e8>] assign_irq_vector+0x34/0xc8
                          [<c1aa82fa>] setup_IO_APIC+0x45a/0xcff
                          [<c1aa56e3>] smp_prepare_cpus+0x5ea/0x8aa
                          [<c010033f>] init+0x32/0x2cb
                          [<c0102005>] kernel_thread_helper+0x5/0xb
   }
   ... key      at: [<c1432574>] vector_lock+0x14/0x3c

  stack backtrace:
   [<c0104f36>] show_trace+0xd/0xf
   [<c010543e>] dump_stack+0x17/0x19
   [<c0144e34>] check_usage+0x1f6/0x203
   [<c0146395>] __lockdep_acquire+0x8c2/0xaa5
   [<c01468c4>] lockdep_acquire+0x68/0x84
   [<c10487f4>] _spin_lock_irqsave+0x2a/0x3a
   [<c04ff8d2>] startup_msi_irq_wo_maskbit+0x10/0x35
   [<c015b932>] probe_irq_on+0x44/0x107
   [<c0673d58>] serial8250_config_port+0x84b/0x986
   [<c06707b1>] uart_add_one_port+0x105/0x289
   [<c1ace54b>] serial8250_init+0xc3/0x10a
   [<c0100457>] init+0x14a/0x2cb
   [<c0102005>] kernel_thread_helper+0x5/0xb

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cc: Jan Beulich <jbeulich@novell.com>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] x86_64: remove unused gart header file

include/asm-x86_64/gart-mapping.h is only ever used in
arch/x86_64/kernel/setup.c and none of its contents are referenced.
Looks to be leftover cruft not removed in the dma_ops patch.

Signed-off-by: Jon Mason <jdmason@us.ibm.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] x86_64: Optimize bitmap_weight for small bitmaps

Use inline code bitmaps <= BITS_PER_LONG in bitmap_weight. This
gives _much_ better code.

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] x86_64: Remove ia32_sys_call_table export

It was originally added for 2.4 oprofile, but 2.6 oprofile doesn't
need that anymore. Shouldn't be any use in tree anymore and it doesn't
make much sense to export the ia32 syscalls when the main syscalls
are not exported.

I think Adrian Bunk asked for removing it several times.

Also included hunk from Adrian to remove the .globl ia32_sys_call_table

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] x86_64: Remove long obsolete CVS

Early development of x86-64 Linux was in CVS, but that hasn't been
the case for a long time now. Remove the obsolete $Id$s.

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] x86_64: nmi watchdog header cleanup

Misc header cleanup for nmi watchdog.

Signed-off-by: Don Zickus <dzickus@redhat.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] x86_64: fix unlikely profiling & vsyscalls on x86_64

fix unlikely profiling in vsyscalls ...

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] x86_64: add END()/ENDPROC() annotations to entry.S

Since END()/ENDPROC() are now available, add respective annotations to
x86_64's entry.S. This should help debugging activities.

Signed-off-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] x86_64: Add compat_printk and sysctl to turn off compat layer warnings

Sometimes e.g. with crashme the compat layer warnings can be noisy.
Add a way to turn them off by gating all output through compat_printk
that checks a global sysctl. The default is not changed.

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] x86_64: Use -ENODEV in IOMMU initialization

Fix

initcall at 0xffffffff806c5b89: pci_iommu_init+0x0/0x53c(): returned with error code -1

Return -ENODEV instead when the IOMMU is not used.

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] i386/x86-64: simplify ioapic_register_intr()

Simplify (remove duplication of) code in ioapic_register_intr().

Signed-off-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] x86_64: serialize assign_irq_vector() use of static variables

Since assign_irq_vector() can be called at runtime, its access of static
variables should be protected by a lock.

Signed-off-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] x86_64: Clean and enhance up K8 northbridge access code

 - Factor out the duplicated access/cache code into a single file
   * Shared between i386/x86-64.
 - Share flush code between AGP and IOMMU
   * Fix a bug: AGP didn't wait for end of flush before
 - Drop 8 northbridges limit and allocate dynamically
 - Add lock to serialize AGP and IOMMU GART flushes
 - Add PCI ID for next AMD northbridge
 - Random related cleanups

The old K8 NUMA discovery code is unchanged. New systems
should all use SRAT for this.

Cc: "Navin Boppuri" <navin.boppuri@newisys.com>
Cc: Dave Jones <davej@redhat.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] x86_64: trivial gart clean-up

A trivial change to have gart_unmap_sg call gart_unmap_single directly,
instead of bouncing through the dma_unmap_single wrapper in
dma-mapping.h.

This change required moving the gart_unmap_single above gart_unmap_sg,
and under gart_map_single (which seems a more logical place that its
current location IMHO).

Signed-off-by: Jon Mason <jdmason@us.ibm.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] x86_64: Implement compat functions for PTRACE_SETSIGINFO/GETSIGINFO

Previously we would just silently provide 64 bit services
for this to 32bit processes.

I also added all the other cases explicitely to the ptrace
compat wrapper to make sure this doesn't happen again.

And removed one bogus check in the wrapper.

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] x86_64: iommu_gart_bitmap search to cross next_bit

Allow search for a contiguous block of iommu space to cross the next_bit
marker if we have already committed ourselves to flushing the gart.

There shouldn't be any reason why we'd restrict the search.

Signed-off-by: Mike Waychison <mikew@google.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] x86_64: Remove bogus comment in topology.h

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] x86_64: x86_64-enable-large-bzImage.patch

enable large bzImages on x86_64. (fix is from x86's build.c) Using this
patch i have successfully built and booted an allyesconfig 13MB+ bzImage
on x86_64 too:

 $ size64 vmlinux
    text    data     bss     dec     hex filename
 23444831        8202642 3439360 35086833        21761f1 vmlinux

 -rw-rw-r--  1 mingo mingo 13121740 Apr 19 09:32 arch/x86_64/boot/bzImage

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] x86_64: Remove most of ia32_unistd.h

It's only needed for three system calls, no need to maintain
a full list forever.

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] x86_64: pci-dma.c clean-up - trivial

Replace hard coded DMA masks with #defines from
include/linux/dma-mapping.h

Signed-off-by: Jon Mason <jdmason@us.ibm.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] x86_64: x86_64 version of the smp alternative patch.

Changes are largely identical to the i386 version:

 * alternative #define are moved to the new alternative.h file.
 * one new elf section with pointers to the lock prefixes which can be
   nop'ed out for non-smp.
 * two new elf sections simliar to the "classic" alternatives to
   replace SMP code with simpler UP code.
 * fixup headers to use alternative.h instead of defining their own
   LOCK / LOCK_PREFIX macros.

The patch reuses the i386 version of the alternatives code to avoid code
duplication.  The code in alternatives.c was shuffled around a bit to
reduce the number of #ifdefs needed.  It also got some tweaks needed for
x86_64 (vsyscall page handling) and new features (noreplacement option
which was x86_64 only up to now).  Debug printk's are changed from
compile-time to runtime.

Loosely based on a early version from Bastian Blank <waldi@debian.org>

Signed-off-by: Gerd Hoffmann <kraxel@suse.de>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>