staging: comedi: cb_das16_cs: remove incomplete async command support

This driver has a (*do_cmdtest) function for analog input async command
support but the (*do_cmd) function just returns -EINVAL.

Remove the incomplete async command support.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9111: trigger sources are validated in (*do_cmdtest)

The trigger sources were already validataed in the (*do_cmdtest) before the
(*do_cmd) is called. Refactor the code in pci9111_ai_do_cmd() to use if/else
instead of the switch since the default cases can never be reached.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: usbduxfast: remove TRIG_TIMER from scan_begin_src

Currently the (*do_cmdtest) indicates that TRIG_TIMER is a valid scan_begin_src
but later this source is tested as -EINVAL. To simplify the code a bit just
remove the TRIG_TIMER source.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: usbduxfast: 'cmd->chanlist_len' was already validataed

Remove the unnecessary check of 'cmd->chanlist_len > 0'. The (*do_cmdtest) already
validated this before the (*do_cmd) was called.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: don't clear 'data' on (*insn_read) timeout

It's not necessary to clear the returned data pointer when an (*insn_read)
times out. For aesthetics, remove all of these in the drivers.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: move (*insn_{read, write}) timeout debug messages to core

Have the comedi core display a standard dev_dbg() message when a timeout
occurs and remove all the driver specific messages.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: dmm32at: use comedi_timeout()

Use comedi_timeout() to wait for the analog input settle and end-of-
conversion. These tests use different registers but the same bit so
the register is passed as the 'context'. The same test is used in
dmm32at_ai_cmd() but the 'insn' is not available. This is ok since
the test function, and comedi_timeout() don't use it.

Use comedi_timout() to wait for the analog output end-of-conversion.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: dt2814: use comedi_timeout()

Use comedi_timeout() to wait for the analog input end-of-conversion.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: pcl818: use comedi_timeout()

Use comedi_timeout() to wait for the analog input end-of-conversion.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: pcl816: use comedi_timeout()

Use comedi_timeout() to wait for the analog input end-of-conversion.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: pcl812: use comedi_timeout()

Use comedi_timeout() to wait for the analog input end-of-conversion.

Combine the logic for the pcl812 and acl812 end-of-conversion in the
helper function to simplify the driver.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: daqboard2000: use comedi_timeout()

Use comedi_timeout() to wait for the analog input pipe full, scanning,
amd end-of-conversion status. The status to check it passed as the
'context' to comedi_timeout().

Use comedi_timeout() to wait for the analog output end-of-conversion.

This also fixes a possible bug where invalid data is returned for the
analog input read if the conversion did not complete, The analog
output has a similar possible bug where the cached readback value is
incorrect if the conversion times out.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: dt282x: use comedi_timeout()

The wait_for() macro in this driver is a bit nasty. It effects control flow
which according to the CodingStyle is a _very_ bad idea.

The mux_busy() and ad_done() macros are also bad since they rely on a local
variable having a specific name.

Remove these macros and use comedi_timeout() to wait for the analog input
mux busy completion and end-of-conversion. Both of these are detected by
reading the same register and testing different bits. Pass the bits to test
as the 'context' to the callback function.

The dt282x_ai_cmd() function also checks for the mux busy completion. The
'insn' is not available here but passing NULL is safe because nothing
uses it.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: s626: use comedi_timeout()

Use comedi_timeout() to wait for the analog input end-of-conversion.

This prevents a deadlock condition that could occur by providing a
timeout in case the end-of-conversion does not happen.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: rtd520: use comedi_timeout()

Use comedi_timeout() to wait for the analog input and output end-of-
conversions.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_daq_700: use comedi_timeout()

Use comedi_timeout() to wait for the analog input end-of-conversion.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: multiq3: use comedi_timeout()

Use comedi_timeout() to wait for the analog input end-of-conversion.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: icp_multi: use comedi_timeout()

Use comedi_timeout() to wait for the analog input and output end-of-
conversion.

Use break to exit the loop when a timeout occurs during the analog
input read so that common code can be used to disable the device.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: dyna_pci10xx: use comedi_timeout()

Use comedi_timeout() to wait for the analog input end-of-conversion.

Also, remove some unnecessary comments.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: amplc_pci230: use comedi_timeout()

Use comedi_timeout() to wait for the analog input end-of-conversion.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adq12b: use comedi_timeout()

Use comedi_timeout() to wait for the analog input end-of-conversion.

This also fixes a possible bug where invalid data is returned if the
conversion did not complete.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adv_pci1710: use comedi_timeout()

Use comedi_timeout() to wait for the analog input end-of-conversion.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9118: use comedi_timeout()

Use comedi_timeout() to wait for the analog input end-of-conversion.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9111: use comedi_timeout()

Use comedi_timeout() to wait for the analog input end-of-conversion.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_atmio16d: use comedi_timeout()

Use comedi_timeout() to wait for the analog input end-of-conversion.

Change the errno returned when the conversion overflows from -ETIME
to -EOVERFLOW.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_at_a2150: use comedi_timeout()

Use comedi_timeout() to wait for the analog input end-of-conversion.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: addi_apci_3xx: use comedi_timeout()

Use comedi_timeout() to wait for the analog input and output end-of-
conversions.

This prevents a deadlock condition that could occur by providing a
timeout in case the end-of-conversion does not happen.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: s526: use comedi_timeout()

Use comedi_timeout() to wait for the analog input end-of-conversion.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: mpc624: use comedi_timeout()

Use comedi_timeout() to wait for the analog input end-of-conversion.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: me_daq: use comedi_timeout()

Use comedi_timeout() to wait for the analog input end-of-conversion.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: dt2811: use comedi_timeout()

Use comedi_timeout() to wait for the analog input end-of-conversion.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: das16m1: use comedi_timeout()

Use comedi_timeout() to wait for the analog input end-of-conversion.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: das08: use comedi_timeout()

Use comedi_timeout() to wait for the analog input end-of-conversion.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: cb_pcimdas: use comedi_timeout()

Use comedi_timeout() to wait for the analog input end-of-conversion.

Remove the unnecessary comments.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: cb_pcidas64: use comedi_timeout()

Use comedi_timeout() to wait for the analog input end-of-conversion.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: cb_pcidas: use comedi_timeout()

Use comedi_timeout() to wait for the analog input end-of-conversion.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: cb_das16_cs: use comedi_timeout()

Use comedi_timeout() to wait for the analog input end-of-conversion.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: aio_aio12_8: use comedi_timeout()

Use comedi_timeout() to wait for the analog input end-of-conversion.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: rti800: use comedi_timeout()

Use comedi_timeout() to wait for the analog input end-of-conversion.

Change the errno returned for an overrun from -EIO to -EOVERFLOW.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: dt2815: use comedi_timeout()

Use comedi_timeout() to wait for the analog output end-of-conversion.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: pcmmio: use comedi_timeout()

Use comedi_timeout() to wait for the analog input and output end-of-
conversions.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: pcmad: use comedi_timeout()

Use comedi_timeout() to wait for the analog input end-of-conversion.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: pcl711: use comedi_timeout()

Use comedi_timeout() to wait for the analog input end-of-conversion.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_labpc: use comedi_timeout()

Use comedi_timeout() to wait for the analog input end-of-conversion.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: mf6x4: use comedi_timeout()

Use comedi_timeout() to wait for the analog input end-of-conversion.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ii_pci20kc: use comedi_timeout()

Use comedi_timeout() to wait for the analog input end-of-conversion.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: das800: use comedi_timeout()

Use comedi_timeout() to wait for the analog input end-of-conversion.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: das16: use comedi_timeout()

Use comedi_timeout() to wait for the analog input end-of-conversion.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci6208x: use comedi_timeout()

Use comedi_timeout() to wait for the analog output end-of-conversion.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: skel: use comedi_timeout()

Use comedi_timeout() to wait for the analog input end-of-conversion.

Since this is the sample skeleton driver, add comments about how the
callback function works with comedi_timeout().

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: introduce comedi_timeout()

Introduce a comedi core helper function to handle the boilerplate
needed by the drivers to busy- wait for a condition to occur.
Typically this condition is the analog input/output end-of-conversion
used with the comedi (*insn_read) and (*insn_write) operations.

To use this function, the drivers just need to provide a callback
that checks for the desired condition. The callback should return
0 if the condition is met or -EBUSY if it is still waiting. Any
other errno will be returned to the caller. If the timeout occurs
before the condition is met -ETIMEDOUT will be returned.

The parameters to the callback function are the comedi_device,
comedi_subdevice, and comedi_insn pointers that were passed to the
(*insn_read) or (*insn_write) as well as an unsigned long, driver
specific, 'context' that can be used to pass any other information
that might be needed in the callback. This 'context' could be anything
such as the register offset to read the status or the bits needed
to check the status. The comedi_timeout() function itself does not
use any of these parameters.

This will help remove all the crazy "wait this many loops" used by
some of the drivers. It also creates a common errno for comedi to
detect when a timeout occurs.

ADC/DAC conversion times are typically pretty fast, usually around
100K samples/sec (10 usec). A conservative timeout of 1 second is used
in comedi_timeout().

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre: fix coccinelle warnings

drivers/staging/lustre/lustre/llite/dir.c:1416:2-8: Replace memcpy with struct assignment

Generated by: coccinelle/misc/memcpy-assign.cocci

CC: Peng Tao <bergwolf@gmail.com>
CC: Andreas Dilger <andreas.dilger@intel.com>
CC: Oleg Drokin <oleg.drokin@intel.com>
CC: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/libcfs: remove cfs_hash_long

Cc: Andreas Dilger <andreas.dilger@intel.com>
Cc: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Peng Tao <bergwolf@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/libcfs: remove user space code from kernel_user_comm.c

Cc: Andreas Dilger <andreas.dilger@intel.com>
Cc: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Peng Tao <bergwolf@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: fpgaboot: fix coccinelle warnings

drivers/staging/gs_fpgaboot/gs_fpgaboot.c:191:2-3: Unneeded semicolon

 Removes unneeded semicolon.

Generated by: coccinelle/misc/semicolon.cocci

CC: Insop Song <insop.song@gainspeed.com>
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: fpgaboot: fix coccinelle warnings

drivers/staging/gs_fpgaboot/gs_fpgaboot.c:305:1-3: WARNING: PTR_RET can be used

 Use PTR_ERR_OR_ZERO rather than if(IS_ERR(...)) + PTR_ERR

Generated by: coccinelle/api/ptr_ret.cocci

CC: Insop Song <insop.song@gainspeed.com>
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: tidspbridge: Remove OMAP_PM_SRF

The symbol is an orphan, get rid of it.

Cc: Paul Bolle <pebolle@tiscali.nl>
Cc: Omar Ramirez Luna <omar.ramirez@copitl.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: remove unused header files

Remove h2clbk.h and nic_spec.h header files.

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8188eu: Fix Smatch warnings

Smatch reports the following:

core/rtw_ieee80211.c:489 rtw_get_wpa_cipher_suite() warn: add some parenthesis here?
core/rtw_ieee80211.c:491 rtw_get_wpa_cipher_suite() warn: add some parenthesis here?
core/rtw_ieee80211.c:493 rtw_get_wpa_cipher_suite() warn: add some parenthesis here?
core/rtw_ieee80211.c:495 rtw_get_wpa_cipher_suite() warn: add some parenthesis here?
core/rtw_ieee80211.c:497 rtw_get_wpa_cipher_suite() warn: add some parenthesis here?
core/rtw_ieee80211.c:505 rtw_get_wpa2_cipher_suite() warn: add some parenthesis here?
core/rtw_ieee80211.c:507 rtw_get_wpa2_cipher_suite() warn: add some parenthesis here?
core/rtw_ieee80211.c:509 rtw_get_wpa2_cipher_suite() warn: add some parenthesis here?
core/rtw_ieee80211.c:511 rtw_get_wpa2_cipher_suite() warn: add some parenthesis here?
core/rtw_ieee80211.c:513 rtw_get_wpa2_cipher_suite() warn: add some parenthesis here?
core/rtw_ieee80211.c:534 rtw_parse_wpa_ie() warn: add some parenthesis here?
core/rtw_ieee80211.c:579 rtw_parse_wpa_ie() warn: add some parenthesis here?
core/rtw_ieee80211.c:649 rtw_parse_wpa2_ie() warn: add some parenthesis here?
core/rtw_ieee80211.c:803 rtw_get_wps_attr() warn: add some parenthesis here?
core/rtw_ieee80211.c:1213 rtw_get_p2p_ie() warn: add some parenthesis here?
core/rtw_ieee80211.c:1248 rtw_get_p2p_attr() warn: add some parenthesis here?
core/rtw_mlme.c:258 _rtw_find_network() warn: add some parenthesis here?
core/rtw_mlme.c:1581 rtw_check_join_candidate() warn: this array is probably non-NULL. 'pmlmepriv->assoc_ssid.Ssid'
core/rtw_mlme.c:1843 SecIsInPMKIDList() warn: add some parenthesis here?
core/rtw_mlme_ext.c:4189 on_action_public_vendor() warn: add some parenthesis here?
core/rtw_recv.c:1157 validate_recv_mgnt_frame() warn: add some parenthesis here?
core/rtw_xmit.c:671 xmitframe_addmic() warn: add some parenthesis here?
hal/rtl8188e_mp.c:206 Hal_MPT_CCKTxPowerAdjustbyIndex() error: buffer overflow 'CCKSwingTable_Ch1_Ch13' 33 <= 255
hal/rtl8188e_mp.c:215 Hal_MPT_CCKTxPowerAdjustbyIndex() error: buffer overflow 'CCKSwingTable_Ch14' 33 <= 255

Not listed here is one remaining buffer overflow message that I believe to be an error in Smatch.

These warnings were reported by Dan Carpenter.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: camel case and clean up devie_set_multi

White space clean up

Camel case changes
pDevice -> priv
pMgmt -> mgmt
byTmpMode -> tmp

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: device_set_multi: set filter off with MACvWriteMultiAddr

set u64 mc_filter to ~0x0 multi cast filter off and write MAC_REG_MAR0 using
MACvWriteMultiAddr to replace pbyData.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: device_set_multi: covert mc_filter to u64

Convert mc_filter to u64, preform netdev_for_each_mc_addr
mask filtering.

In MACvWriteMultiAddr endian correct mc_filter and write
the entire multicast once.

Reported-by: Joe Perches <joe@perches.com>
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: Additional item for rtl8188eu TODO list

The rtw_recv_indicatepkt() function in the file named
drivers/staging/rtl8188eu/os_dep/recv_linux.c has this strange code:

rcu_read_lock();
rcu_dereference(padapter->pnetdev->rx_handler_data);
rcu_read_unlock();

This code has no effect.  Normally, you would assign the result of
rcu_dereference() to some variable, but it is not clear from the
code what variable that would be.  Therefore, this patch applies to
the TODO file instead of the code itself.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8188eu: Fix more Smatch warnings and errors

After updating Smatch, the following new errors and warnings are reported:

drivers/staging/rtl8188eu/core/rtw_recv.c:368 recvframe_chkmic() warn: variable dereferenced before check 'psecuritypriv' (see line 364)
drivers/staging/rtl8188eu/os_dep/ioctl_linux.c:2642 rtw_wps_start() warn: variable dereferenced before check 'pdata' (see line 2636)
drivers/staging/rtl8188eu/os_dep/ioctl_linux.c:4461 rtw_dbg_port() error: we previously assumed 'pregpriv' could be null (see line 4453)
drivers/staging/rtl8188eu/os_dep/ioctl_linux.c:4473 rtw_dbg_port() error: we previously assumed 'pregpriv' could be null (see line 4469)

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8821ae: Fix potential infinite loop

Smatch reports the following:
drivers/staging/rtl8821ae/rtl8821ae/hw.c:153 _rtl8821ae_set_fw_clock_on() info: ignoring unreachable code.

Upon investigation, the code in this region has the capability of creating
an infinite loop.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8188eu: Remove dead code

There are a few lines in this driver that depend on a macro
CONFIG_BT_COEXIST. But there's no Kconfig symbol of that name nor is
there a preprocessor define for that string. So remove these lines.

Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: comedi: clean up conditional statement in addi_apci_3xxx.c

In this conditional statement, if (chan < 16), but the instruction passed
in data[0] is INSN_CONFIG_DIO_QUERY, the function does not return early,
but the else-branch does not get executed either.  As a result, mask
would be used uninitialized in the next line.  We want
comedi_dio_insn_config() to use a chan_mask based on the chanspec for the
INSN_CONFIG_DIO_QUERY instruction, so mask should be initialized to 0.
Then, if instead the instruction is INSN_CONFIG_DIO_{INPUT,OUTPUT}, we
return an error if (chan < 16) as these are invalid instructions for
ports 0 and 1, or update the mask otherwise, so all the io_bits are
modified for port 2.  This ensures that mask is always initialized by the
time it is used.

Signed-off-by: Chase Southwood <chase.southwood@yahoo.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: android: lowmemorykiller: set TIF_MEMDIE before send kill sig

Set TIF_MEMDIE tsk_thread flag before send kill signal to the
selected thread. This is to fit a usual code sequence and avoid
potential race issue.

Signed-off-by: Weijie Yang <weijie.yang@samsung.com>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging:lustre: Fix typo in comment and printk within lustre/obdclass

This patch fixed spelling typo within lustre/lustre/obdclass.

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/bcm: move IOCTL_BCM_TIME_SINCE_NET_ENTRY case out to its own function.

bcm_char_ioctl is one of the longest non-generated functions in the kernel,
at 1906 lines.  Splitting it up into multiple functions should simplify
this a lot.

Signed-off-by: Dave Jones <davej@fedoraproject.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/bcm: move IOCTL_BCM_GET_DEVICE_DRIVER_INFO case out to its own function.

bcm_char_ioctl is one of the longest non-generated functions in the kernel,
at 1906 lines.  Splitting it up into multiple functions should simplify
this a lot.

Signed-off-by: Dave Jones <davej@fedoraproject.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/bcm: move IOCTL_BCM_CNTRLMSG_MASK case out to its own function.

bcm_char_ioctl is one of the longest non-generated functions in the kernel,
at 1906 lines.  Splitting it up into multiple functions should simplify
this a lot.

Signed-off-by: Dave Jones <davej@fedoraproject.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/bcm: move IOCTL_BCM_NVM_RAW_READ case out to its own function.

bcm_char_ioctl is one of the longest non-generated functions in the kernel,
at 1906 lines.  Splitting it up into multiple functions should simplify
this a lot.

Signed-off-by: Dave Jones <davej@fedoraproject.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/bcm: move IOCTL_BCM_SELECT_DSD case out to its own function.

bcm_char_ioctl is one of the longest non-generated functions in the kernel,
at 1906 lines.  Splitting it up into multiple functions should simplify
this a lot.

Signed-off-by: Dave Jones <davej@fedoraproject.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/bcm: move IOCTL_BCM_GET_FLASH_CS_INFO case out to its own function.

bcm_char_ioctl is one of the longest non-generated functions in the kernel,
at 1906 lines.  Splitting it up into multiple functions should simplify
this a lot.

Signed-off-by: Dave Jones <davej@fedoraproject.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/bcm: move IOCTL_BCM_COPY_SECTION case out to its own function.

bcm_char_ioctl is one of the longest non-generated functions in the kernel,
at 1906 lines.  Splitting it up into multiple functions should simplify
this a lot.

Signed-off-by: Dave Jones <davej@fedoraproject.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/bcm: formatting cleaning for IOCTL_BCM_IDENTIFY_ACTIVE_SECTION

Signed-off-by: Dave Jones <davej@fedoraproject.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/bcm: move IOCTL_BCM_SET_ACTIVE_SECTION case out to its own function.

bcm_char_ioctl is one of the longest non-generated functions in the kernel,
at 1906 lines.  Splitting it up into multiple functions should simplify
this a lot.

Signed-off-by: Dave Jones <davej@fedoraproject.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/bcm: move IOCTL_BCM_GET_FLASH2X_SECTION_BITMAP case out to its own function.

bcm_char_ioctl is one of the longest non-generated functions in the kernel,
at 1906 lines.  Splitting it up into multiple functions should simplify
this a lot.

Signed-off-by: Dave Jones <davej@fedoraproject.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/bcm: move IOCTL_BCM_FLASH2X_SECTION_WRITE case out to its own function.

bcm_char_ioctl is one of the longest non-generated functions in the kernel,
at 1906 lines.  Splitting it up into multiple functions should simplify
this a lot.

Signed-off-by: Dave Jones <davej@fedoraproject.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/bcm: move IOCTL_BCM_FLASH2X_SECTION_READ case out to its own function.

bcm_char_ioctl is one of the longest non-generated functions in the kernel,
at 1906 lines.  Splitting it up into multiple functions should simplify
this a lot.

Signed-off-by: Dave Jones <davej@fedoraproject.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/bcm: move IOCTL_BCM_NVM_[READ|WRITE] cases out to their own function.

bcm_char_ioctl is one of the longest non-generated functions in the kernel,
at 1906 lines.  Splitting it up into multiple functions should simplify
this a lot.

Signed-off-by: Dave Jones <davej@fedoraproject.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/bcm: move IOCTL_BCM_SET_DEBUG case out to its own function.

bcm_char_ioctl is one of the longest non-generated functions in the kernel,
at 1906 lines.  Splitting it up into multiple functions should simplify
this a lot.

Signed-off-by: Dave Jones <davej@fedoraproject.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/bcm: move IOCTL_BCM_CAL_INIT case out to its own function.

bcm_char_ioctl is one of the longest non-generated functions in the kernel,
at 1906 lines.  Splitting it up into multiple functions should simplify
this a lot.

Signed-off-by: Dave Jones <davej@fedoraproject.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/bcm: move IOCTL_BCM_GET_NVM_SIZE case out to its own function.

bcm_char_ioctl is one of the longest non-generated functions in the kernel,
at 1906 lines.  Splitting it up into multiple functions should simplify
this a lot.

Signed-off-by: Dave Jones <davej@fedoraproject.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/bcm: move IOCTL_BCM_BULK_WRM case out to its own function.

bcm_char_ioctl is one of the longest non-generated functions in the kernel,
at 1906 lines.  Splitting it up into multiple functions should simplify
this a lot.

Signed-off-by: Dave Jones <davej@fedoraproject.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/bcm: move IOCTL_BCM_GET_HOST_MIBS case out to its own function.

bcm_char_ioctl is one of the longest non-generated functions in the kernel,
at 1906 lines.  Splitting it up into multiple functions should simplify
this a lot.

Signed-off-by: Dave Jones <davej@fedoraproject.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/bcm: move IOCTL_BCM_GET_DSX_INDICATION case out to its own function.

bcm_char_ioctl is one of the longest non-generated functions in the kernel,
at 1906 lines.  Splitting it up into multiple functions should simplify
this a lot.

Signed-off-by: Dave Jones <davej@fedoraproject.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/bcm: move IOCTL_BCM_SET_MAC_TRACING case out to its own function.

bcm_char_ioctl is one of the longest non-generated functions in the kernel,
at 1906 lines.  Splitting it up into multiple functions should simplify
this a lot.

Signed-off-by: Dave Jones <davej@fedoraproject.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/bcm: move IOCTL_BCM_GET_CURRENT_STATUS case out to its own function.

bcm_char_ioctl is one of the longest non-generated functions in the kernel,
at 1906 lines.  Splitting it up into multiple functions should simplify
this a lot.

Signed-off-by: Dave Jones <davej@fedoraproject.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/bcm: move IOCTL_BCM_GET_DRIVER_VERSION case out to its own function.

bcm_char_ioctl is one of the longest non-generated functions in the kernel,
at 1906 lines.  Splitting it up into multiple functions should simplify
this a lot.

Signed-off-by: Dave Jones <davej@fedoraproject.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/bcm: move IOCTL_BCM_SWITCH_TRANSFER_MODE case out to its own function.

bcm_char_ioctl is one of the longest non-generated functions in the kernel,
at 1906 lines.  Splitting it up into multiple functions should simplify
this a lot.

Signed-off-by: Dave Jones <davej@fedoraproject.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/bcm: move IOCTL_QOS_THRESHOLD case out to its own function.

bcm_char_ioctl is one of the longest non-generated functions in the kernel,
at 1906 lines.  Splitting it up into multiple functions should simplify
this a lot.

Signed-off-by: Dave Jones <davej@fedoraproject.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/bcm: move IOCTL_CHIP_RESET case out to its own function.

bcm_char_ioctl is one of the longest non-generated functions in the kernel,
at 1906 lines.  Splitting it up into multiple functions should simplify
this a lot.

Signed-off-by: Dave Jones <davej@fedoraproject.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/bcm: move IOCTL_BCM_BUFFER_DOWNLOAD_STOP case out to its own function.

bcm_char_ioctl is one of the longest non-generated functions in the kernel,
at 1906 lines.  Splitting it up into multiple functions should simplify
this a lot.

Signed-off-by: Dave Jones <davej@fedoraproject.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/bcm: move IOCTL_BCM_BUFFER_DOWNLOAD case out to its own function.

bcm_char_ioctl is one of the longest non-generated functions in the kernel,
at 1906 lines.  Splitting it up into multiple functions should simplify
this a lot.

Signed-off-by: Dave Jones <davej@fedoraproject.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/bcm: move IOCTL_BCM_BUFFER_DOWNLOAD_START case out to its own function.

bcm_char_ioctl is one of the longest non-generated functions in the kernel,
at 1906 lines.  Splitting it up into multiple functions should simplify
this a lot.

Signed-off-by: Dave Jones <davej@fedoraproject.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/bcm: move several request ioctl cases out to its own function.

bcm_char_ioctl is one of the longest non-generated functions in the kernel,
at 1906 lines.  Splitting it up into multiple functions should simplify
this a lot.

Signed-off-by: Dave Jones <davej@fedoraproject.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/bcm: move IOCTL_BCM_GPIO_MODE_REQUEST case out to its own function.

bcm_char_ioctl is one of the longest non-generated functions in the kernel,
at 1906 lines.  Splitting it up into multiple functions should simplify
this a lot.

Signed-off-by: Dave Jones <davej@fedoraproject.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/bcm: move IOCTL_BCM_GPIO_MULTI_REQUEST case out to its own function.

bcm_char_ioctl is one of the longest non-generated functions in the kernel,
at 1906 lines.  Splitting it up into multiple functions should simplify
this a lot.

Signed-off-by: Dave Jones <davej@fedoraproject.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>