Takashi Iwai [Wed, 28 Jul 2021 11:23:50 +0000 (13:23 +0200)]
ASoC: intel: atom: Fix reference to PCM buffer address
commit
2e6b836312a477d647a7920b56810a5a25f6c856 upstream.
PCM buffers might be allocated dynamically when the buffer
preallocation failed or a larger buffer is requested, and it's not
guaranteed that substream->dma_buffer points to the actually used
buffer. The address should be retrieved from runtime->dma_addr,
instead of substream->dma_buffer (and shouldn't use virt_to_phys).
Also, remove the line overriding runtime->dma_area superfluously,
which was already set up at the PCM buffer allocation.
Cc: Cezary Rojewski <cezary.rojewski@intel.com>
Cc: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20210728112353.6675-3-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Colin Ian King [Fri, 30 Jul 2021 07:16:51 +0000 (08:16 +0100)]
iio: adc: Fix incorrect exit of for-loop
commit
5afc1540f13804a31bb704b763308e17688369c5 upstream.
Currently the for-loop that scans for the optimial adc_period iterates
through all the possible adc_period levels because the exit logic in
the loop is inverted. I believe the comparison should be swapped and
the continue replaced with a break to exit the loop at the correct
point.
Addresses-Coverity: ("Continue has no effect")
Fixes:
e08e19c331fb ("iio:adc: add iio driver for Palmas (twl6035/7) gpadc")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20210730071651.17394-1-colin.king@canonical.com
Cc: <stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Sun, 15 Aug 2021 11:01:05 +0000 (13:01 +0200)]
Linux 4.9.280
Link: https://lore.kernel.org/r/20210813150522.445553924@linuxfoundation.org
Tested-by: Shuah Khan <skhan@linuxfoundation.org>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Miklos Szeredi [Mon, 9 Aug 2021 08:19:47 +0000 (10:19 +0200)]
ovl: prevent private clone if bind mount is not allowed
commit
427215d85e8d1476da1a86b8d67aceb485eb3631 upstream.
Add the following checks from __do_loopback() to clone_private_mount() as
well:
- verify that the mount is in the current namespace
- verify that there are no locked children
Reported-by: Alois Wohlschlager <alois1@gmx-topmail.de>
Fixes:
c771d683a62e ("vfs: introduce clone_private_mount()")
Cc: <stable@vger.kernel.org> # v3.18
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
YueHaibing [Wed, 19 May 2021 02:47:04 +0000 (10:47 +0800)]
net: xilinx_emaclite: Do not print real IOMEM pointer
commit
d0d62baa7f505bd4c59cd169692ff07ec49dde37 upstream.
Printing kernel pointers is discouraged because they might leak kernel
memory layout. This fixes smatch warning:
drivers/net/ethernet/xilinx/xilinx_emaclite.c:1191 xemaclite_of_probe() warn:
argument 4 to %08lX specifier is cast from pointer
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Pavel Machek (CIP) <pavel@denx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pali Rohár [Sat, 7 Aug 2021 16:00:50 +0000 (18:00 +0200)]
ppp: Fix generating ppp unit id when ifname is not specified
commit
3125f26c514826077f2a4490b75e9b1c7a644c42 upstream.
When registering new ppp interface via PPPIOCNEWUNIT ioctl then kernel has
to choose interface name as this ioctl API does not support specifying it.
Kernel in this case register new interface with name "ppp<id>" where <id>
is the ppp unit id, which can be obtained via PPPIOCGUNIT ioctl. This
applies also in the case when registering new ppp interface via rtnl
without supplying IFLA_IFNAME.
PPPIOCNEWUNIT ioctl allows to specify own ppp unit id which will kernel
assign to ppp interface, in case this ppp id is not already used by other
ppp interface.
In case user does not specify ppp unit id then kernel choose the first free
ppp unit id. This applies also for case when creating ppp interface via
rtnl method as it does not provide a way for specifying own ppp unit id.
If some network interface (does not have to be ppp) has name "ppp<id>"
with this first free ppp id then PPPIOCNEWUNIT ioctl or rtnl call fails.
And registering new ppp interface is not possible anymore, until interface
which holds conflicting name is renamed. Or when using rtnl method with
custom interface name in IFLA_IFNAME.
As list of allocated / used ppp unit ids is not possible to retrieve from
kernel to userspace, userspace has no idea what happens nor which interface
is doing this conflict.
So change the algorithm how ppp unit id is generated. And choose the first
number which is not neither used as ppp unit id nor in some network
interface with pattern "ppp<id>".
This issue can be simply reproduced by following pppd call when there is no
ppp interface registered and also no interface with name pattern "ppp<id>":
pppd ifname ppp1 +ipv6 noip noauth nolock local nodetach pty "pppd +ipv6 noip noauth nolock local nodetach notty"
Or by creating the one ppp interface (which gets assigned ppp unit id 0),
renaming it to "ppp1" and then trying to create a new ppp interface (which
will always fails as next free ppp unit id is 1, but network interface with
name "ppp1" exists).
This patch fixes above described issue by generating new and new ppp unit
id until some non-conflicting id with network interfaces is generated.
Signed-off-by: Pali Rohár <pali@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Longfang Liu [Fri, 9 Apr 2021 08:48:01 +0000 (16:48 +0800)]
USB:ehci:fix Kunpeng920 ehci hardware problem
commit
26b75952ca0b8b4b3050adb9582c8e2f44d49687 upstream.
Kunpeng920's EHCI controller does not have SBRN register.
Reading the SBRN register when the controller driver is
initialized will get 0.
When rebooting the EHCI driver, ehci_shutdown() will be called.
if the sbrn flag is 0, ehci_shutdown() will return directly.
The sbrn flag being 0 will cause the EHCI interrupt signal to
not be turned off after reboot. this interrupt that is not closed
will cause an exception to the device sharing the interrupt.
Therefore, the EHCI controller of Kunpeng920 needs to skip
the read operation of the SBRN register.
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Longfang Liu <liulongfang@huawei.com>
Link: https://lore.kernel.org/r/1617958081-17999-1-git-send-email-liulongfang@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Letu Ren [Sun, 25 Jul 2021 13:45:12 +0000 (21:45 +0800)]
net/qla3xxx: fix schedule while atomic in ql_wait_for_drvr_lock and ql_adapter_reset
[ Upstream commit
92766c4628ea349c8ddab0cd7bd0488f36e5c4ce ]
When calling the 'ql_wait_for_drvr_lock' and 'ql_adapter_reset', the driver
has already acquired the spin lock, so the driver should not call 'ssleep'
in atomic context.
This bug can be fixed by using 'mdelay' instead of 'ssleep'.
Reported-by: Letu Ren <fantasquex@gmail.com>
Signed-off-by: Letu Ren <fantasquex@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Prarit Bhargava [Tue, 5 Jan 2021 15:16:27 +0000 (10:16 -0500)]
alpha: Send stop IPI to send to online CPUs
[ Upstream commit
caace6ca4e06f09413fb8f8a63319594cfb7d47d ]
This issue was noticed while debugging a shutdown issue where some
secondary CPUs are not being shutdown correctly. A fix for that [1] requires
that secondary cpus be offlined using the cpu_online_mask so that the
stop operation is a no-op if CPU HOTPLUG is disabled. I, like the author in
[1] looked at the architectures and found that alpha is one of two
architectures that executes smp_send_stop() on all possible CPUs.
On alpha, smp_send_stop() sends an IPI to all possible CPUs but only needs
to send them to online CPUs.
Send the stop IPI to only the online CPUs.
[1] https://lkml.org/lkml/2020/1/10/250
Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Signed-off-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Shreyansh Chouhan [Fri, 9 Jul 2021 15:29:29 +0000 (20:59 +0530)]
reiserfs: check directory items on read from disk
[ Upstream commit
13d257503c0930010ef9eed78b689cec417ab741 ]
While verifying the leaf item that we read from the disk, reiserfs
doesn't check the directory items, this could cause a crash when we
read a directory item from the disk that has an invalid deh_location.
This patch adds a check to the directory items read from the disk that
does a bounds check on deh_location for the directory entries. Any
directory entry header with a directory entry offset greater than the
item length is considered invalid.
Link: https://lore.kernel.org/r/20210709152929.766363-1-chouhan.shreyansh630@gmail.com
Reported-by: syzbot+c31a48e6702ccb3d64c9@syzkaller.appspotmail.com
Signed-off-by: Shreyansh Chouhan <chouhan.shreyansh630@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yu Kuai [Fri, 2 Jul 2021 04:07:43 +0000 (12:07 +0800)]
reiserfs: add check for root_inode in reiserfs_fill_super
[ Upstream commit
2acf15b94d5b8ea8392c4b6753a6ffac3135cd78 ]
Our syzcaller report a NULL pointer dereference:
BUG: kernel NULL pointer dereference, address:
0000000000000000
PGD
116e95067 P4D
116e95067 PUD
1080b5067 PMD 0
Oops: 0010 [#1] SMP KASAN
CPU: 7 PID: 592 Comm: a.out Not tainted 5.13.0-next-
20210629-dirty #67
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ?-20190727_073836-buildvm-p4
RIP: 0010:0x0
Code: Unable to access opcode bytes at RIP 0xffffffffffffffd6.
RSP: 0018:
ffff888114e779b8 EFLAGS:
00010246
RAX:
0000000000000000 RBX:
1ffff110229cef39 RCX:
ffffffffaa67e1aa
RDX:
0000000000000000 RSI:
ffff88810a58ee00 RDI:
ffff8881233180b0
RBP:
ffffffffac38e9c0 R08:
ffffffffaa67e17e R09:
0000000000000001
R10:
ffffffffb91c5557 R11:
fffffbfff7238aaa R12:
ffff88810a58ee00
R13:
ffff888114e77aa0 R14:
0000000000000000 R15:
ffff8881233180b0
FS:
00007f946163c480(0000) GS:
ffff88839f1c0000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
ffffffffffffffd6 CR3:
00000001099c1000 CR4:
00000000000006e0
DR0:
0000000000000000 DR1:
0000000000000000 DR2:
0000000000000000
DR3:
0000000000000000 DR6:
00000000fffe0ff0 DR7:
0000000000000400
Call Trace:
__lookup_slow+0x116/0x2d0
? page_put_link+0x120/0x120
? __d_lookup+0xfc/0x320
? d_lookup+0x49/0x90
lookup_one_len+0x13c/0x170
? __lookup_slow+0x2d0/0x2d0
? reiserfs_schedule_old_flush+0x31/0x130
reiserfs_lookup_privroot+0x64/0x150
reiserfs_fill_super+0x158c/0x1b90
? finish_unfinished+0xb10/0xb10
? bprintf+0xe0/0xe0
? __mutex_lock_slowpath+0x30/0x30
? __kasan_check_write+0x20/0x30
? up_write+0x51/0xb0
? set_blocksize+0x9f/0x1f0
mount_bdev+0x27c/0x2d0
? finish_unfinished+0xb10/0xb10
? reiserfs_kill_sb+0x120/0x120
get_super_block+0x19/0x30
legacy_get_tree+0x76/0xf0
vfs_get_tree+0x49/0x160
? capable+0x1d/0x30
path_mount+0xacc/0x1380
? putname+0x97/0xd0
? finish_automount+0x450/0x450
? kmem_cache_free+0xf8/0x5a0
? putname+0x97/0xd0
do_mount+0xe2/0x110
? path_mount+0x1380/0x1380
? copy_mount_options+0x69/0x140
__x64_sys_mount+0xf0/0x190
do_syscall_64+0x35/0x80
entry_SYSCALL_64_after_hwframe+0x44/0xae
This is because 'root_inode' is initialized with wrong mode, and
it's i_op is set to 'reiserfs_special_inode_operations'. Thus add
check for 'root_inode' to fix the problem.
Link: https://lore.kernel.org/r/20210702040743.1918552-1-yukuai3@huawei.com
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Like Xu [Mon, 2 Aug 2021 07:08:50 +0000 (15:08 +0800)]
perf/x86/amd: Don't touch the AMD64_EVENTSEL_HOSTONLY bit inside the guest
commit
df51fe7ea1c1c2c3bfdb81279712fdd2e4ea6c27 upstream.
If we use "perf record" in an AMD Milan guest, dmesg reports a #GP
warning from an unchecked MSR access error on MSR_F15H_PERF_CTLx:
[] unchecked MSR access error: WRMSR to 0xc0010200 (tried to write 0x0000020000110076) at rIP: 0xffffffff8106ddb4 (native_write_msr+0x4/0x20)
[] Call Trace:
[] amd_pmu_disable_event+0x22/0x90
[] x86_pmu_stop+0x4c/0xa0
[] x86_pmu_del+0x3a/0x140
The AMD64_EVENTSEL_HOSTONLY bit is defined and used on the host,
while the guest perf driver should avoid such use.
Fixes:
1018faa6cf23 ("perf/x86/kvm: Fix Host-Only/Guest-Only counting with SVM disabled")
Signed-off-by: Like Xu <likexu@tencent.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Liam Merwick <liam.merwick@oracle.com>
Tested-by: Kim Phillips <kim.phillips@amd.com>
Tested-by: Liam Merwick <liam.merwick@oracle.com>
Link: https://lkml.kernel.org/r/20210802070850.35295-1-likexu@tencent.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Zheyu Ma [Tue, 22 Jun 2021 07:11:31 +0000 (07:11 +0000)]
pcmcia: i82092: fix a null pointer dereference bug
commit
e39cdacf2f664b09029e7c1eb354c91a20c367af upstream.
During the driver loading process, the 'dev' field was not assigned, but
the 'dev' field was referenced in the subsequent 'i82092aa_set_mem_map'
function.
Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
CC: <stable@vger.kernel.org>
[linux@dominikbrodowski.net: shorten commit message, add Cc to stable]
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Maciej W. Rozycki [Sat, 26 Jun 2021 04:11:13 +0000 (06:11 +0200)]
MIPS: Malta: Do not byte-swap accesses to the CBUS UART
commit
9a936d6c3d3d6c33ecbadf72dccdb567b5cd3c72 upstream.
Correct big-endian accesses to the CBUS UART, a Malta on-board discrete
TI16C550C part wired directly to the system controller's device bus, and
do not use byte swapping with the 32-bit accesses to the device.
The CBUS is used for devices such as the boot flash memory needed early
on in system bootstrap even before PCI has been initialised. Therefore
it uses the system controller's device bus, which follows the endianness
set with the CPU, which means no byte-swapping is ever required for data
accesses to CBUS, unlike with PCI.
The CBUS UART uses the UPIO_MEM32 access method, that is the `readl' and
`writel' MMIO accessors, which on the MIPS platform imply byte-swapping
with PCI systems. Consequently the wrong byte lane is accessed with the
big-endian configuration and the UART is not correctly accessed.
As it happens the UPIO_MEM32BE access method makes use of the `ioread32'
and `iowrite32' MMIO accessors, which still use `readl' and `writel'
respectively, however they byte-swap data passed, effectively cancelling
swapping done with the accessors themselves and making it suitable for
the CBUS UART.
Make the CBUS UART switch between UPIO_MEM32 and UPIO_MEM32BE then,
based on the endianness selected. With this change in place the device
is correctly recognised with big-endian Malta at boot, along with the
Super I/O devices behind PCI:
Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled
printk: console [ttyS0] disabled
serial8250.0: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
printk: console [ttyS0] enabled
printk: bootconsole [uart8250] disabled
serial8250.0: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
serial8250.0: ttyS2 at MMIO 0x1f000900 (irq = 20, base_baud = 230400) is a 16550A
Fixes:
e7c4782f92fc ("[MIPS] Put an end to <asm/serial.h>'s long and annyoing existence")
Cc: stable@vger.kernel.org # v2.6.23+
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Link: https://lore.kernel.org/r/alpine.DEB.2.21.2106260524430.37803@angie.orcam.me.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Maciej W. Rozycki [Sat, 26 Jun 2021 04:11:05 +0000 (06:11 +0200)]
serial: 8250: Mask out floating 16/32-bit bus bits
commit
e5227c51090e165db4b48dcaa300605bfced7014 upstream.
Make sure only actual 8 bits of the IIR register are used in determining
the port type in `autoconfig'.
The `serial_in' port accessor returns the `unsigned int' type, meaning
that with UPIO_AU, UPIO_MEM16, UPIO_MEM32, and UPIO_MEM32BE access types
more than 8 bits of data are returned, of which the high order bits will
often come from bus lines that are left floating in the data phase. For
example with the MIPS Malta board's CBUS UART, where the registers are
aligned on 8-byte boundaries and which uses 32-bit accesses, data as
follows is returned:
YAMON> dump -32 0xbf000900 0x40
BF000900:
1F000942 1F000942 1F000900 1F000900 ...B...B........
BF000910:
1F000901 1F000901 1F000900 1F000900 ................
BF000920:
1F000900 1F000900 1F000960 1F000960 ...........`...`
BF000930:
1F000900 1F000900 1F0009FF 1F0009FF ................
YAMON>
Evidently high-order 24 bits return values previously driven in the
address phase (the 3 highest order address bits used with the command
above are masked out in the simple virtual address mapping used here and
come out at zeros on the external bus), a common scenario with bus lines
left floating, due to bus capacitance.
Consequently when the value of IIR, mapped at 0x1f000910, is retrieved
in `autoconfig', it comes out at 0x1f0009c1 and when it is right-shifted
by 6 and then assigned to 8-bit `scratch' variable, the value calculated
is 0x27, not one of 0, 1, 2, 3 expected in port type determination.
Fix the issue then, by assigning the value returned from `serial_in' to
`scratch' first, which masks out 24 high-order bits retrieved, and only
then right-shift the resulting 8-bit data quantity, producing the value
of 3 in this case, as expected. Fix the same issue in `serial_dl_read'.
The problem first appeared with Linux 2.6.9-rc3 which predates our repo
history, but the origin could be identified with the old MIPS/Linux repo
also at: <git://git.kernel.org/pub/scm/linux/kernel/git/ralf/linux.git>
as commit
e0d2356c0777 ("Merge with Linux 2.6.9-rc3."), where code in
`serial_in' was updated with this case:
+ case UPIO_MEM32:
+ return readl(up->port.membase + offset);
+
which made it produce results outside the unsigned 8-bit range for the
first time, though obviously it is system dependent what actual values
appear in the high order bits retrieved and it may well have been zeros
in the relevant positions with the system the change originally was
intended for. It is at that point that code in `autoconf' should have
been updated accordingly, but clearly it was overlooked.
Fixes:
1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org # v2.6.12+
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Link: https://lore.kernel.org/r/alpine.DEB.2.21.2106260516220.37803@angie.orcam.me.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alex Xu (Hello71) [Thu, 5 Aug 2021 14:40:47 +0000 (10:40 -0400)]
pipe: increase minimum default pipe size to 2 pages
commit
46c4c9d1beb7f5b4cec4dd90e7728720583ee348 upstream.
This program always prints 4096 and hangs before the patch, and always
prints 8192 and exits successfully after:
int main()
{
int pipefd[2];
for (int i = 0; i < 1025; i++)
if (pipe(pipefd) == -1)
return 1;
size_t bufsz = fcntl(pipefd[1], F_GETPIPE_SZ);
printf("%zd\n", bufsz);
char *buf = calloc(bufsz, 1);
write(pipefd[1], buf, bufsz);
read(pipefd[0], buf, bufsz-1);
write(pipefd[1], buf, 1);
}
Note that you may need to increase your RLIMIT_NOFILE before running the
program.
Fixes:
759c01142a ("pipe: limit the per-user amount of pages allocated in pipes")
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/lkml/1628086770.5rn8p04n6j.none@localhost/
Link: https://lore.kernel.org/lkml/1628127094.lxxn016tj7.none@localhost/
Signed-off-by: Alex Xu (Hello71) <alex_y_xu@yahoo.ca>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Johan Hovold [Wed, 23 Jun 2021 08:45:21 +0000 (10:45 +0200)]
media: rtl28xxu: fix zero-length control request
commit
76f22c93b209c811bd489950f17f8839adb31901 upstream.
The direction of the pipe argument must match the request-type direction
bit or control requests may fail depending on the host-controller-driver
implementation.
Control transfers without a data stage are treated as OUT requests by
the USB stack and should be using usb_sndctrlpipe(). Failing to do so
will now trigger a warning.
The driver uses a zero-length i2c-read request for type detection so
update the control-request code to use usb_sndctrlpipe() in this case.
Note that actually trying to read the i2c register in question does not
work as the register might not exist (e.g. depending on the demodulator)
as reported by Eero Lehtinen <debiangamer2@gmail.com>.
Reported-by: syzbot+faf11bbadc5a372564da@syzkaller.appspotmail.com
Reported-by: Eero Lehtinen <debiangamer2@gmail.com>
Tested-by: Eero Lehtinen <debiangamer2@gmail.com>
Fixes:
d0f232e823af ("[media] rtl28xxu: add heuristic to detect chip type")
Cc: stable@vger.kernel.org # 4.0
Cc: Antti Palosaari <crope@iki.fi>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hui Su [Fri, 11 Jun 2021 02:21:07 +0000 (10:21 +0800)]
scripts/tracing: fix the bug that can't parse raw_trace_func
commit
1c0cec64a7cc545eb49f374a43e9f7190a14defa upstream.
Since commit
77271ce4b2c0 ("tracing: Add irq, preempt-count and need resched info
to default trace output"), the default trace output format has been changed to:
<idle>-0 [009] d.h. 22420.068695: _raw_spin_lock_irqsave <-hrtimer_interrupt
<idle>-0 [000] ..s. 22420.068695: _nohz_idle_balance <-run_rebalance_domains
<idle>-0 [011] d.h. 22420.068695: account_process_tick <-update_process_times
origin trace output format:(before v3.2.0)
# tracer: nop
#
# TASK-PID CPU# TIMESTAMP FUNCTION
# | | | | |
migration/0-6 [000] 50.025810: rcu_note_context_switch <-__schedule
migration/0-6 [000] 50.025812: trace_rcu_utilization <-rcu_note_context_switch
migration/0-6 [000] 50.025813: rcu_sched_qs <-rcu_note_context_switch
migration/0-6 [000] 50.025815: rcu_preempt_qs <-rcu_note_context_switch
migration/0-6 [000] 50.025817: trace_rcu_utilization <-rcu_note_context_switch
migration/0-6 [000] 50.025818: debug_lockdep_rcu_enabled <-__schedule
migration/0-6 [000] 50.025820: debug_lockdep_rcu_enabled <-__schedule
The draw_functrace.py(introduced in v2.6.28) can't parse the new version format trace_func,
So we need modify draw_functrace.py to adapt the new version trace output format.
Link: https://lkml.kernel.org/r/20210611022107.608787-1-suhui@zeku.com
Cc: stable@vger.kernel.org
Fixes:
77271ce4b2c0 tracing: Add irq, preempt-count and need resched info to default trace output
Signed-off-by: Hui Su <suhui@zeku.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dmitry Osipenko [Sat, 17 Jul 2021 18:21:27 +0000 (21:21 +0300)]
usb: otg-fsm: Fix hrtimer list corruption
commit
bf88fef0b6f1488abeca594d377991171c00e52a upstream.
The HNP work can be re-scheduled while it's still in-fly. This results in
re-initialization of the busy work, resetting the hrtimer's list node of
the work and crashing kernel with null dereference within kernel/timer
once work's timer is expired. It's very easy to trigger this problem by
re-plugging USB cable quickly. Initialize HNP work only once to fix this
trouble.
Unable to handle kernel NULL pointer dereference at virtual address
00000126)
...
PC is at __run_timers.part.0+0x150/0x228
LR is at __next_timer_interrupt+0x51/0x9c
...
(__run_timers.part.0) from [<
c0187a2b>] (run_timer_softirq+0x2f/0x50)
(run_timer_softirq) from [<
c01013ad>] (__do_softirq+0xd5/0x2f0)
(__do_softirq) from [<
c012589b>] (irq_exit+0xab/0xb8)
(irq_exit) from [<
c0170341>] (handle_domain_irq+0x45/0x60)
(handle_domain_irq) from [<
c04c4a43>] (gic_handle_irq+0x6b/0x7c)
(gic_handle_irq) from [<
c0100b65>] (__irq_svc+0x65/0xac)
Cc: stable@vger.kernel.org
Acked-by: Peter Chen <peter.chen@kernel.org>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Link: https://lore.kernel.org/r/20210717182134.30262-6-digetx@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
David Bauer [Wed, 4 Aug 2021 23:25:22 +0000 (01:25 +0200)]
USB: serial: ftdi_sio: add device ID for Auto-M3 OP-COM v2
commit
8da0e55c7988ef9f08a708c38e5c75ecd8862cf8 upstream.
The Auto-M3 OP-COM v2 is a OBD diagnostic device using a FTD232 for the
USB connection.
Signed-off-by: David Bauer <mail@david-bauer.net>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Willy Tarreau [Sat, 24 Jul 2021 15:27:39 +0000 (17:27 +0200)]
USB: serial: ch341: fix character loss at high transfer rates
commit
3c18e9baee0ef97510dcda78c82285f52626764b upstream.
The chip supports high transfer rates, but with the small default buffers
(64 bytes read), some entire blocks are regularly lost. This typically
happens at 1.5 Mbps (which is the default speed on Rockchip devices) when
used as a console to access U-Boot where the output of the "help" command
misses many lines and where "printenv" mangles the environment.
The FTDI driver doesn't suffer at all from this. One difference is that
it uses 512 bytes rx buffers and 256 bytes tx buffers. Adopting these
values completely resolved the issue, even the output of "dmesg" is
reliable. I preferred to leave the Tx value unchanged as it is not
involved in this issue, while a change could increase the risk of
triggering the same issue with other devices having too small buffers.
I verified that it backports well (and works) at least to 5.4. It's of
low importance enough to be dropped where it doesn't trivially apply
anymore.
Cc: stable@vger.kernel.org
Signed-off-by: Willy Tarreau <w@1wt.eu>
Link: https://lore.kernel.org/r/20210724152739.18726-1-w@1wt.eu
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Daniele Palmas [Tue, 3 Aug 2021 19:47:11 +0000 (21:47 +0200)]
USB: serial: option: add Telit FD980 composition 0x1056
commit
5648c073c33d33a0a19d0cb1194a4eb88efe2b71 upstream.
Add the following Telit FD980 composition 0x1056:
Cfg #1: mass storage
Cfg #2: rndis, tty, adb, tty, tty, tty, tty
Signed-off-by: Daniele Palmas <dnlplm@gmail.com>
Link: https://lore.kernel.org/r/20210803194711.3036-1-dnlplm@gmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Qiang.zhang [Fri, 23 Jul 2021 00:43:34 +0000 (08:43 +0800)]
USB: usbtmc: Fix RCU stall warning
commit
30fad76ce4e98263edfa8f885c81d5426c1bf169 upstream.
rcu: INFO: rcu_preempt self-detected stall on CPU
rcu: 1-...!: (2 ticks this GP) idle=d92/1/0x4000000000000000
softirq=25390/25392 fqs=3
(t=12164 jiffies g=31645 q=43226)
rcu: rcu_preempt kthread starved for 12162 jiffies! g31645 f0x0
RCU_GP_WAIT_FQS(5) ->state=0x0 ->cpu=0
rcu: Unless rcu_preempt kthread gets sufficient CPU time,
OOM is now expected behavior.
rcu: RCU grace-period kthread stack dump:
task:rcu_preempt state:R running task
...........
usbtmc 3-1:0.0: unknown status received: -71
usbtmc 3-1:0.0: unknown status received: -71
usbtmc 3-1:0.0: unknown status received: -71
usbtmc 3-1:0.0: unknown status received: -71
usbtmc 3-1:0.0: unknown status received: -71
usbtmc 3-1:0.0: unknown status received: -71
usbtmc 3-1:0.0: unknown status received: -71
usbtmc 3-1:0.0: unknown status received: -71
usbtmc 3-1:0.0: usb_submit_urb failed: -19
The function usbtmc_interrupt() resubmits urbs when the error status
of an urb is -EPROTO. In systems using the dummy_hcd usb controller
this can result in endless interrupt loops when the usbtmc device is
disconnected from the host system.
Since host controller drivers already try to recover from transmission
errors, there is no need to resubmit the urb or try other solutions
to repair the error situation.
In case of errors the INT pipe just stops to wait for further packets.
Fixes:
dbf3e7f654c0 ("Implement an ioctl to support the USMTMC-USB488 READ_STATUS_BYTE operation")
Cc: stable@vger.kernel.org
Reported-by: syzbot+e2eae5639e7203360018@syzkaller.appspotmail.com
Signed-off-by: Qiang.zhang <qiang.zhang@windriver.com>
Acked-by: Guido Kiener <guido.kiener@rohde-schwarz.com>
Link: https://lore.kernel.org/r/20210723004334.458930-1-qiang.zhang@windriver.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tetsuo Handa [Wed, 4 Aug 2021 10:26:56 +0000 (19:26 +0900)]
Bluetooth: defer cleanup of resources in hci_unregister_dev()
[ Upstream commit
e04480920d1eec9c061841399aa6f35b6f987d8b ]
syzbot is hitting might_sleep() warning at hci_sock_dev_event() due to
calling lock_sock() with rw spinlock held [1].
It seems that history of this locking problem is a trial and error.
Commit
b40df5743ee8 ("[PATCH] bluetooth: fix socket locking in
hci_sock_dev_event()") in 2.6.21-rc4 changed bh_lock_sock() to
lock_sock() as an attempt to fix lockdep warning.
Then, commit
4ce61d1c7a8e ("[BLUETOOTH]: Fix locking in
hci_sock_dev_event().") in 2.6.22-rc2 changed lock_sock() to
local_bh_disable() + bh_lock_sock_nested() as an attempt to fix the
sleep in atomic context warning.
Then, commit
4b5dd696f81b ("Bluetooth: Remove local_bh_disable() from
hci_sock.c") in 3.3-rc1 removed local_bh_disable().
Then, commit
e305509e678b ("Bluetooth: use correct lock to prevent UAF
of hdev object") in 5.13-rc5 again changed bh_lock_sock_nested() to
lock_sock() as an attempt to fix CVE-2021-3573.
This difficulty comes from current implementation that
hci_sock_dev_event(HCI_DEV_UNREG) is responsible for dropping all
references from sockets because hci_unregister_dev() immediately
reclaims resources as soon as returning from
hci_sock_dev_event(HCI_DEV_UNREG).
But the history suggests that hci_sock_dev_event(HCI_DEV_UNREG) was not
doing what it should do.
Therefore, instead of trying to detach sockets from device, let's accept
not detaching sockets from device at hci_sock_dev_event(HCI_DEV_UNREG),
by moving actual cleanup of resources from hci_unregister_dev() to
hci_cleanup_dev() which is called by bt_host_release() when all
references to this unregistered device (which is a kobject) are gone.
Since hci_sock_dev_event(HCI_DEV_UNREG) no longer resets
hci_pi(sk)->hdev, we need to check whether this device was unregistered
and return an error based on HCI_UNREGISTER flag. There might be subtle
behavioral difference in "monitor the hdev" functionality; please report
if you found something went wrong due to this patch.
Link: https://syzkaller.appspot.com/bug?extid=a5df189917e79d5e59c9
Reported-by: syzbot <syzbot+a5df189917e79d5e59c9@syzkaller.appspotmail.com>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Fixes:
e305509e678b ("Bluetooth: use correct lock to prevent UAF of hdev object")
Acked-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Pavel Skripkin [Wed, 4 Aug 2021 15:52:20 +0000 (18:52 +0300)]
net: vxge: fix use-after-free in vxge_device_unregister
[ Upstream commit
942e560a3d3862dd5dee1411dbdd7097d29b8416 ]
Smatch says:
drivers/net/ethernet/neterion/vxge/vxge-main.c:3518 vxge_device_unregister() error: Using vdev after free_{netdev,candev}(dev);
drivers/net/ethernet/neterion/vxge/vxge-main.c:3518 vxge_device_unregister() error: Using vdev after free_{netdev,candev}(dev);
drivers/net/ethernet/neterion/vxge/vxge-main.c:3520 vxge_device_unregister() error: Using vdev after free_{netdev,candev}(dev);
drivers/net/ethernet/neterion/vxge/vxge-main.c:3520 vxge_device_unregister() error: Using vdev after free_{netdev,candev}(dev);
Since vdev pointer is netdev private data accessing it after free_netdev()
call can cause use-after-free bug. Fix it by moving free_netdev() call at
the end of the function
Fixes:
6cca200362b4 ("vxge: cleanup probe error paths")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Pavel Skripkin [Wed, 4 Aug 2021 15:51:51 +0000 (18:51 +0300)]
net: fec: fix use-after-free in fec_drv_remove
[ Upstream commit
44712965bf12ae1758cec4de53816ed4b914ca1a ]
Smatch says:
drivers/net/ethernet/freescale/fec_main.c:3994 fec_drv_remove() error: Using fep after free_{netdev,candev}(ndev);
drivers/net/ethernet/freescale/fec_main.c:3995 fec_drv_remove() error: Using fep after free_{netdev,candev}(ndev);
Since fep pointer is netdev private data, accessing it after free_netdev()
call can cause use-after-free bug. Fix it by moving free_netdev() call at
the end of the function
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes:
a31eda65ba21 ("net: fec: fix clock count mis-match")
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Reviewed-by: Joakim Zhang <qiangqing.zhang@nxp.com>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Pavel Skripkin [Wed, 4 Aug 2021 14:30:05 +0000 (17:30 +0300)]
net: pegasus: fix uninit-value in get_interrupt_interval
[ Upstream commit
af35fc37354cda3c9c8cc4961b1d24bdc9d27903 ]
Syzbot reported uninit value pegasus_probe(). The problem was in missing
error handling.
get_interrupt_interval() internally calls read_eprom_word() which can
fail in some cases. For example: failed to receive usb control message.
These cases should be handled to prevent uninit value bug, since
read_eprom_word() will not initialize passed stack variable in case of
internal failure.
Fail log:
BUG: KMSAN: uninit-value in get_interrupt_interval drivers/net/usb/pegasus.c:746 [inline]
BUG: KMSAN: uninit-value in pegasus_probe+0x10e7/0x4080 drivers/net/usb/pegasus.c:1152
CPU: 1 PID: 825 Comm: kworker/1:1 Not tainted 5.12.0-rc6-syzkaller #0
...
Workqueue: usb_hub_wq hub_event
Call Trace:
__dump_stack lib/dump_stack.c:79 [inline]
dump_stack+0x24c/0x2e0 lib/dump_stack.c:120
kmsan_report+0xfb/0x1e0 mm/kmsan/kmsan_report.c:118
__msan_warning+0x5c/0xa0 mm/kmsan/kmsan_instr.c:197
get_interrupt_interval drivers/net/usb/pegasus.c:746 [inline]
pegasus_probe+0x10e7/0x4080 drivers/net/usb/pegasus.c:1152
....
Local variable ----data.i@pegasus_probe created at:
get_interrupt_interval drivers/net/usb/pegasus.c:1151 [inline]
pegasus_probe+0xe57/0x4080 drivers/net/usb/pegasus.c:1152
get_interrupt_interval drivers/net/usb/pegasus.c:1151 [inline]
pegasus_probe+0xe57/0x4080 drivers/net/usb/pegasus.c:1152
Reported-and-tested-by: syzbot+02c9f70f3afae308464a@syzkaller.appspotmail.com
Fixes:
1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Link: https://lore.kernel.org/r/20210804143005.439-1-paskripkin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dan Carpenter [Thu, 5 Aug 2021 10:38:26 +0000 (13:38 +0300)]
bnx2x: fix an error code in bnx2x_nic_load()
[ Upstream commit
fb653827c758725b149b5c924a5eb50ab4812750 ]
Set the error code if bnx2x_alloc_fw_stats_mem() fails. The current
code returns success.
Fixes:
ad5afc89365e ("bnx2x: Separate VF and PF logic")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
H. Nikolaus Schaller [Thu, 8 Jul 2021 08:57:10 +0000 (10:57 +0200)]
mips: Fix non-POSIX regexp
[ Upstream commit
28bbbb9875a35975904e46f9b06fa689d051b290 ]
When cross compiling a MIPS kernel on a BSD based HOSTCC leads
to errors like
SYNC include/config/auto.conf.cmd - due to: .config
egrep: empty (sub)expression
UPD include/config/kernel.release
HOSTCC scripts/dtc/dtc.o - due to target missing
It turns out that egrep uses this egrep pattern:
(|MINOR_|PATCHLEVEL_)
This is not valid syntax or gives undefined results according
to POSIX 9.5.3 ERE Grammar
https://pubs.opengroup.org/onlinepubs/
9699919799/basedefs/V1_chap09.html
It seems to be silently accepted by the Linux egrep implementation
while a BSD host complains.
Such patterns can be replaced by a transformation like
"(|p1|p2)" -> "(p1|p2)?"
Fixes:
48c35b2d245f ("[MIPS] There is no __GNUC_MAJOR__")
Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Wang Hai [Sat, 31 Jul 2021 06:38:01 +0000 (14:38 +0800)]
net: natsemi: Fix missing pci_disable_device() in probe and remove
[ Upstream commit
7fe74dfd41c428afb24e2e615470832fa997ff14 ]
Replace pci_enable_device() with pcim_enable_device(),
pci_disable_device() and pci_release_regions() will be
called in release automatically.
Fixes:
1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Hans Verkuil [Wed, 30 Jun 2021 07:58:23 +0000 (09:58 +0200)]
media: videobuf2-core: dequeue if start_streaming fails
[ Upstream commit
c592b46907adbeb81243f7eb7a468c36692658b8 ]
If a vb2_queue sets q->min_buffers_needed then when the number of
queued buffers reaches q->min_buffers_needed, vb2_core_qbuf() will call
the start_streaming() callback. If start_streaming() returns an error,
then that error was just returned by vb2_core_qbuf(), but the buffer
was still queued. However, userspace expects that if VIDIOC_QBUF fails,
the buffer is returned dequeued.
So if start_streaming() fails, then remove the buffer from the queue,
thus avoiding this unwanted side-effect.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Fixes:
b3379c6201bb ("[media] vb2: only call start_streaming if sufficient buffers are queued")
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Li Manyi [Mon, 26 Jul 2021 11:49:13 +0000 (19:49 +0800)]
scsi: sr: Return correct event when media event code is 3
[ Upstream commit
5c04243a56a7977185b00400e59ca7e108004faf ]
Media event code 3 is defined in the MMC-6 spec as follows:
"MediaRemoval: The media has been removed from the specified slot, and
the Drive is unable to access the media without user intervention. This
applies to media changers only."
This indicated that treating the condition as an EJECT_REQUEST was
appropriate. However, doing so had the unfortunate side-effect of causing
the drive tray to be physically ejected on resume. Instead treat the event
as a MEDIA_CHANGE request.
Fixes:
7dd753ca59d6 ("scsi: sr: Return appropriate error code when disk is ejected")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=213759
Link: https://lore.kernel.org/r/20210726114913.6760-1-limanyi@uniontech.com
Signed-off-by: Li Manyi <limanyi@uniontech.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Takashi Iwai [Tue, 3 Aug 2021 11:43:12 +0000 (13:43 +0200)]
ALSA: seq: Fix racy deletion of subscriber
commit
97367c97226aab8b298ada954ce12659ee3ad2a4 upstream.
It turned out that the current implementation of the port subscription
is racy. The subscription contains two linked lists, and we have to
add to or delete from both lists. Since both connection and
disconnection procedures perform the same order for those two lists
(i.e. src list, then dest list), when a deletion happens during a
connection procedure, the src list may be deleted before the dest list
addition completes, and this may lead to a use-after-free or an Oops,
even though the access to both lists are protected via mutex.
The simple workaround for this race is to change the access order for
the disconnection, namely, dest list, then src list. This assures
that the connection has been established when disconnecting, and also
the concurrent deletion can be avoided.
Reported-and-tested-by: folkert <folkert@vanheusden.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210801182754.GP890690@belle.intranet.vanheusden.com
Link: https://lore.kernel.org/r/20210803114312.2536-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Sun, 8 Aug 2021 06:38:54 +0000 (08:38 +0200)]
Linux 4.9.279
Link: https://lore.kernel.org/r/20210806081109.324409899@linuxfoundation.org
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Guenter Roeck [Mon, 2 Aug 2021 03:00:23 +0000 (20:00 -0700)]
spi: mediatek: Fix fifo transfer
commit
0d5c3954b35eddff0da0436c31e8d721eceb7dc2 upstream.
Commit
3a70dd2d0503 ("spi: mediatek: fix fifo rx mode") claims that
fifo RX mode was never handled, and adds the presumably missing code
to the FIFO transfer function. However, the claim that receive data
was not handled is incorrect. It was handled as part of interrupt
handling after the transfer was complete. The code added with the above
mentioned commit reads data from the receive FIFO before the transfer
is started, which is wrong. This results in an actual transfer error
on a Hayato Chromebook.
Remove the code trying to handle receive data before the transfer is
started to fix the problem.
Fixes:
3a70dd2d0503 ("spi: mediatek: fix fifo rx mode")
Cc: Peter Hess <peter.hess@ph-home.de>
Cc: Frank Wunderlich <frank-w@public-files.de>
Cc: Tzung-Bi Shih <tzungbi@google.com>
Cc: Hsin-Yi Wang <hsinyi@google.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Hsin-Yi Wang <hsinyi@google.com>
Tested-by: Tzung-Bi Shih <tzungbi@google.com>
Link: https://lore.kernel.org/r/20210802030023.1748777-1-linux@roeck-us.net
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ziyang Xuan [Thu, 22 Jul 2021 07:08:19 +0000 (15:08 +0800)]
can: raw: raw_setsockopt(): fix raw_rcv panic for sock UAF
commit
54f93336d000229f72c26d8a3f69dd256b744528 upstream.
We get a bug during ltp can_filter test as following.
===========================================
[60919.264984] BUG: unable to handle kernel NULL pointer dereference at
0000000000000010
[60919.265223] PGD
8000003dda726067 P4D
8000003dda726067 PUD
3dda727067 PMD 0
[60919.265443] Oops: 0000 [#1] SMP PTI
[60919.265550] CPU: 30 PID:
3638365 Comm: can_filter Kdump: loaded Tainted: G W 4.19.90+ #1
[60919.266068] RIP: 0010:selinux_socket_sock_rcv_skb+0x3e/0x200
[60919.293289] RSP: 0018:
ffff8d53bfc03cf8 EFLAGS:
00010246
[60919.307140] RAX:
0000000000000000 RBX:
000000000000001d RCX:
0000000000000007
[60919.320756] RDX:
0000000000000001 RSI:
ffff8d5104a8ed00 RDI:
ffff8d53bfc03d30
[60919.334319] RBP:
ffff8d9338056800 R08:
ffff8d53bfc29d80 R09:
0000000000000001
[60919.347969] R10:
ffff8d53bfc03ec0 R11:
ffffb8526ef47c98 R12:
ffff8d53bfc03d30
[60919.350320] perf: interrupt took too long (3063 > 2500), lowering kernel.perf_event_max_sample_rate to 65000
[60919.361148] R13:
0000000000000001 R14:
ffff8d53bcf90000 R15:
0000000000000000
[60919.361151] FS:
00007fb78b6b3600(0000) GS:
ffff8d53bfc00000(0000) knlGS:
0000000000000000
[60919.400812] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[60919.413730] CR2:
0000000000000010 CR3:
0000003e3f784006 CR4:
00000000007606e0
[60919.426479] DR0:
0000000000000000 DR1:
0000000000000000 DR2:
0000000000000000
[60919.439339] DR3:
0000000000000000 DR6:
00000000fffe0ff0 DR7:
0000000000000400
[60919.451608] PKRU:
55555554
[60919.463622] Call Trace:
[60919.475617] <IRQ>
[60919.487122] ? update_load_avg+0x89/0x5d0
[60919.498478] ? update_load_avg+0x89/0x5d0
[60919.509822] ? account_entity_enqueue+0xc5/0xf0
[60919.520709] security_sock_rcv_skb+0x2a/0x40
[60919.531413] sk_filter_trim_cap+0x47/0x1b0
[60919.542178] ? kmem_cache_alloc+0x38/0x1b0
[60919.552444] sock_queue_rcv_skb+0x17/0x30
[60919.562477] raw_rcv+0x110/0x190 [can_raw]
[60919.572539] can_rcv_filter+0xbc/0x1b0 [can]
[60919.582173] can_receive+0x6b/0xb0 [can]
[60919.591595] can_rcv+0x31/0x70 [can]
[60919.600783] __netif_receive_skb_one_core+0x5a/0x80
[60919.609864] process_backlog+0x9b/0x150
[60919.618691] net_rx_action+0x156/0x400
[60919.627310] ? sched_clock_cpu+0xc/0xa0
[60919.635714] __do_softirq+0xe8/0x2e9
[60919.644161] do_softirq_own_stack+0x2a/0x40
[60919.652154] </IRQ>
[60919.659899] do_softirq.part.17+0x4f/0x60
[60919.667475] __local_bh_enable_ip+0x60/0x70
[60919.675089] __dev_queue_xmit+0x539/0x920
[60919.682267] ? finish_wait+0x80/0x80
[60919.689218] ? finish_wait+0x80/0x80
[60919.695886] ? sock_alloc_send_pskb+0x211/0x230
[60919.702395] ? can_send+0xe5/0x1f0 [can]
[60919.708882] can_send+0xe5/0x1f0 [can]
[60919.715037] raw_sendmsg+0x16d/0x268 [can_raw]
It's because raw_setsockopt() concurrently with
unregister_netdevice_many(). Concurrent scenario as following.
cpu0 cpu1
raw_bind
raw_setsockopt unregister_netdevice_many
unlist_netdevice
dev_get_by_index raw_notifier
raw_enable_filters ......
can_rx_register
can_rcv_list_find(..., net->can.rx_alldev_list)
......
sock_close
raw_release(sock_a)
......
can_receive
can_rcv_filter(net->can.rx_alldev_list, ...)
raw_rcv(skb, sock_a)
BUG
After unlist_netdevice(), dev_get_by_index() return NULL in
raw_setsockopt(). Function raw_enable_filters() will add sock
and can_filter to net->can.rx_alldev_list. Then the sock is closed.
Followed by, we sock_sendmsg() to a new vcan device use the same
can_filter. Protocol stack match the old receiver whose sock has
been released on net->can.rx_alldev_list in can_rcv_filter().
Function raw_rcv() uses the freed sock. UAF BUG is triggered.
We can find that the key issue is that net_device has not been
protected in raw_setsockopt(). Use rtnl_lock to protect net_device
in raw_setsockopt().
Fixes:
c18ce101f2e4 ("[CAN]: Add raw protocol")
Link: https://lore.kernel.org/r/20210722070819.1048263-1-william.xuanziyang@huawei.com
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com>
Acked-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Thu, 5 Aug 2021 18:58:57 +0000 (20:58 +0200)]
Revert "Bluetooth: Shutdown controller after workqueues are flushed or cancelled"
This reverts commit
dd86afb4bb75378848584e0e858929730a878d52 which is
commit
0ea9fd001a14ebc294f112b0361a4e601551d508 upstream.
It has been reported to have problems:
https://lore.kernel.org/linux-bluetooth/8735ryk0o7.fsf@baylibre.com/
Reported-by: Guenter Roeck <linux@roeck-us.net>
Cc: Kai-Heng Feng <kai.heng.feng@canonical.com>
Cc: Marcel Holtmann <marcel@holtmann.org>
Cc: Sasha Levin <sashal@kernel.org>
Link: https://lore.kernel.org/r/efee3a58-a4d2-af22-0931-e81b877ab539@roeck-us.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pravin B Shelar [Thu, 15 Jul 2021 23:59:00 +0000 (16:59 -0700)]
net: Fix zero-copy head len calculation.
[ Upstream commit
a17ad0961706244dce48ec941f7e476a38c0e727 ]
In some cases skb head could be locked and entire header
data is pulled from skb. When skb_zerocopy() called in such cases,
following BUG is triggered. This patch fixes it by copying entire
skb in such cases.
This could be optimized incase this is performance bottleneck.
---8<---
kernel BUG at net/core/skbuff.c:2961!
invalid opcode: 0000 [#1] SMP PTI
CPU: 2 PID: 0 Comm: swapper/2 Tainted: G OE 5.4.0-77-generic #86-Ubuntu
Hardware name: OpenStack Foundation OpenStack Nova, BIOS 1.13.0-1ubuntu1.1 04/01/2014
RIP: 0010:skb_zerocopy+0x37a/0x3a0
RSP: 0018:
ffffbcc70013ca38 EFLAGS:
00010246
Call Trace:
<IRQ>
queue_userspace_packet+0x2af/0x5e0 [openvswitch]
ovs_dp_upcall+0x3d/0x60 [openvswitch]
ovs_dp_process_packet+0x125/0x150 [openvswitch]
ovs_vport_receive+0x77/0xd0 [openvswitch]
netdev_port_receive+0x87/0x130 [openvswitch]
netdev_frame_hook+0x4b/0x60 [openvswitch]
__netif_receive_skb_core+0x2b4/0xc90
__netif_receive_skb_one_core+0x3f/0xa0
__netif_receive_skb+0x18/0x60
process_backlog+0xa9/0x160
net_rx_action+0x142/0x390
__do_softirq+0xe1/0x2d6
irq_exit+0xae/0xb0
do_IRQ+0x5a/0xf0
common_interrupt+0xf/0xf
Code that triggered BUG:
int
skb_zerocopy(struct sk_buff *to, struct sk_buff *from, int len, int hlen)
{
int i, j = 0;
int plen = 0; /* length of skb->head fragment */
int ret;
struct page *page;
unsigned int offset;
BUG_ON(!from->head_frag && !hlen);
Signed-off-by: Pravin B Shelar <pshelar@ovn.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Takashi Iwai [Wed, 14 Jul 2021 17:00:21 +0000 (19:00 +0200)]
r8152: Fix potential PM refcount imbalance
[ Upstream commit
9c23aa51477a37f8b56c3c40192248db0663c196 ]
rtl8152_close() takes the refcount via usb_autopm_get_interface() but
it doesn't release when RTL8152_UNPLUG test hits. This may lead to
the imbalance of PM refcount. This patch addresses it.
Link: https://bugzilla.suse.com/show_bug.cgi?id=1186194
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Axel Lin [Sun, 27 Jun 2021 08:04:18 +0000 (16:04 +0800)]
regulator: rt5033: Fix n_voltages settings for BUCK and LDO
[ Upstream commit
6549c46af8551b346bcc0b9043f93848319acd5c ]
For linear regulators, the n_voltages should be (max - min) / step + 1.
Buck voltage from 1v to 3V, per step 100mV, and vout mask is 0x1f.
If value is from 20 to 31, the voltage will all be fixed to 3V.
And LDO also, just vout range is different from 1.2v to 3v, step is the
same. If value is from 18 to 31, the voltage will also be fixed to 3v.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Reviewed-by: ChiYuan Huang <cy_huang@richtek.com>
Link: https://lore.kernel.org/r/20210627080418.1718127-1-axel.lin@ingics.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Goldwyn Rodrigues [Mon, 2 Aug 2021 14:30:34 +0000 (09:30 -0500)]
btrfs: mark compressed range uptodate only if all bio succeed
[ Upstream commit
240246f6b913b0c23733cfd2def1d283f8cc9bbe ]
In compression write endio sequence, the range which the compressed_bio
writes is marked as uptodate if the last bio of the compressed (sub)bios
is completed successfully. There could be previous bio which may
have failed which is recorded in cb->errors.
Set the writeback range as uptodate only if cb->errors is zero, as opposed
to checking only the last bio's status.
Backporting notes: in all versions up to 4.4 the last argument is always
replaced by "!cb->errors".
CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Greg Kroah-Hartman [Wed, 4 Aug 2021 09:58:04 +0000 (11:58 +0200)]
Linux 4.9.278
Link: https://lore.kernel.org/r/20210802134332.931915241@linuxfoundation.org
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Wang Hai [Wed, 28 Jul 2021 12:11:07 +0000 (20:11 +0800)]
sis900: Fix missing pci_disable_device() in probe and remove
[ Upstream commit
89fb62fde3b226f99b7015280cf132e2a7438edf ]
Replace pci_enable_device() with pcim_enable_device(),
pci_disable_device() and pci_release_regions() will be
called in release automatically.
Fixes:
1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Wang Hai [Wed, 28 Jul 2021 07:43:13 +0000 (15:43 +0800)]
tulip: windbond-840: Fix missing pci_disable_device() in probe and remove
[ Upstream commit
76a16be07b209a3f507c72abe823bd3af1c8661a ]
Replace pci_enable_device() with pcim_enable_device(),
pci_disable_device() and pci_release_regions() will be
called in release automatically.
Fixes:
1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Maor Gottlieb [Mon, 26 Jul 2021 06:20:14 +0000 (09:20 +0300)]
net/mlx5: Fix flow table chaining
[ Upstream commit
8b54874ef1617185048029a3083d510569e93751 ]
Fix a bug when flow table is created in priority that already
has other flow tables as shown in the below diagram.
If the new flow table (FT-B) has the lowest level in the priority,
we need to connect the flow tables from the previous priority (p0)
to this new table. In addition when this flow table is destroyed
(FT-B), we need to connect the flow tables from the previous
priority (p0) to the next level flow table (FT-C) in the same
priority of the destroyed table (if exists).
---------
|root_ns|
---------
|
--------------------------------
| | |
---------- ---------- ---------
|p(prio)-x| | p-y | | p-n |
---------- ---------- ---------
| |
---------------- ------------------
|ns(e.g bypass)| |ns(e.g. kernel) |
---------------- ------------------
| | |
------- ------ ----
| p0 | | p1 | |p2|
------- ------ ----
| | \
-------- ------- ------
| FT-A | |FT-B | |FT-C|
-------- ------- ------
Fixes:
f90edfd279f3 ("net/mlx5_core: Connect flow tables")
Signed-off-by: Maor Gottlieb <maorg@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Pavel Skripkin [Sat, 24 Jul 2021 21:11:59 +0000 (00:11 +0300)]
net: llc: fix skb_over_panic
[ Upstream commit
c7c9d2102c9c098916ab9e0ab248006107d00d6c ]
Syzbot reported skb_over_panic() in llc_pdu_init_as_xid_cmd(). The
problem was in wrong LCC header manipulations.
Syzbot's reproducer tries to send XID packet. llc_ui_sendmsg() is
doing following steps:
1. skb allocation with size = len + header size
len is passed from userpace and header size
is 3 since addr->sllc_xid is set.
2. skb_reserve() for header_len = 3
3. filling all other space with memcpy_from_msg()
Ok, at this moment we have fully loaded skb, only headers needs to be
filled.
Then code comes to llc_sap_action_send_xid_c(). This function pushes 3
bytes for LLC PDU header and initializes it. Then comes
llc_pdu_init_as_xid_cmd(). It initalizes next 3 bytes *AFTER* LLC PDU
header and call skb_push(skb, 3). This looks wrong for 2 reasons:
1. Bytes rigth after LLC header are user data, so this function
was overwriting payload.
2. skb_push(skb, 3) call can cause skb_over_panic() since
all free space was filled in llc_ui_sendmsg(). (This can
happen is user passed 686 len: 686 + 14 (eth header) + 3 (LLC
header) = 703. SKB_DATA_ALIGN(703) = 704)
So, in this patch I added 2 new private constansts: LLC_PDU_TYPE_U_XID
and LLC_PDU_LEN_U_XID. LLC_PDU_LEN_U_XID is used to correctly reserve
header size to handle LLC + XID case. LLC_PDU_TYPE_U_XID is used by
llc_pdu_header_init() function to push 6 bytes instead of 3. And finally
I removed skb_push() call from llc_pdu_init_as_xid_cmd().
This changes should not affect other parts of LLC, since after
all steps we just transmit buffer.
Fixes:
1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-and-tested-by: syzbot+5e5a981ad7cc54c4b2b4@syzkaller.appspotmail.com
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jiapeng Chong [Fri, 23 Jul 2021 10:36:09 +0000 (18:36 +0800)]
mlx4: Fix missing error code in mlx4_load_one()
[ Upstream commit
7e4960b3d66d7248b23de3251118147812b42da2 ]
The error code is missing in this code scenario, add the error code
'-EINVAL' to the return value 'err'.
Eliminate the follow smatch warning:
drivers/net/ethernet/mellanox/mlx4/main.c:3538 mlx4_load_one() warn:
missing error code 'err'.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Fixes:
7ae0e400cd93 ("net/mlx4_core: Flexible (asymmetric) allocation of EQs and MSI-X vectors for PF/VFs")
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Hoang Le [Fri, 23 Jul 2021 02:25:34 +0000 (09:25 +0700)]
tipc: fix sleeping in tipc accept routine
[ Upstream commit
d237a7f11719ff9320721be5818352e48071aab6 ]
The release_sock() is blocking function, it would change the state
after sleeping. In order to evaluate the stated condition outside
the socket lock context, switch to use wait_woken() instead.
Fixes:
6398e23cdb1d8 ("tipc: standardize accept routine")
Acked-by: Jon Maloy <jmaloy@redhat.com>
Signed-off-by: Hoang Le <hoang.h.le@dektech.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Pablo Neira Ayuso [Tue, 20 Jul 2021 16:22:50 +0000 (18:22 +0200)]
netfilter: nft_nat: allow to specify layer 4 protocol NAT only
[ Upstream commit
a33f387ecd5aafae514095c2c4a8c24f7aea7e8b ]
nft_nat reports a bogus EAFNOSUPPORT if no layer 3 information is specified.
Fixes:
d07db9884a5f ("netfilter: nf_tables: introduce nft_validate_register_load()")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Florian Westphal [Sun, 18 Jul 2021 16:36:00 +0000 (18:36 +0200)]
netfilter: conntrack: adjust stop timestamp to real expiry value
[ Upstream commit
30a56a2b881821625f79837d4d968c679852444e ]
In case the entry is evicted via garbage collection there is
delay between the timeout value and the eviction event.
This adjusts the stop value based on how much time has passed.
Fixes:
b87a2f9199ea82 ("netfilter: conntrack: add gc worker to remove timed-out entries")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Nguyen Dinh Phi [Mon, 28 Jun 2021 13:23:34 +0000 (21:23 +0800)]
cfg80211: Fix possible memory leak in function cfg80211_bss_update
commit
f9a5c358c8d26fed0cc45f2afc64633d4ba21dff upstream.
When we exceed the limit of BSS entries, this function will free the
new entry, however, at this time, it is the last door to access the
inputed ies, so these ies will be unreferenced objects and cause memory
leak.
Therefore we should free its ies before deallocating the new entry, beside
of dropping it from hidden_list.
Signed-off-by: Nguyen Dinh Phi <phind.uet@gmail.com>
Link: https://lore.kernel.org/r/20210628132334.851095-1-phind.uet@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jan Kiszka [Sun, 11 Apr 2021 08:12:16 +0000 (10:12 +0200)]
x86/asm: Ensure asm/proto.h can be included stand-alone
[ Upstream commit
f7b21a0e41171d22296b897dac6e4c41d2a3643c ]
Fix:
../arch/x86/include/asm/proto.h:14:30: warning: ‘struct task_struct’ declared \
inside parameter list will not be visible outside of this definition or declaration
long do_arch_prctl_64(struct task_struct *task, int option, unsigned long arg2);
^~~~~~~~~~~
.../arch/x86/include/asm/proto.h:40:34: warning: ‘struct task_struct’ declared \
inside parameter list will not be visible outside of this definition or declaration
long do_arch_prctl_common(struct task_struct *task, int option,
^~~~~~~~~~~
if linux/sched.h hasn't be included previously. This fixes a build error
when this header is used outside of the kernel tree.
[ bp: Massage commit message. ]
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/b76b4be3-cf66-f6b2-9a6c-3e7ef54f9845@web.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
Krzysztof Kozlowski [Wed, 28 Jul 2021 06:49:09 +0000 (08:49 +0200)]
nfc: nfcsim: fix use after free during module unload
commit
5e7b30d24a5b8cb691c173b45b50e3ca0191be19 upstream.
There is a use after free memory corruption during module exit:
- nfcsim_exit()
- nfcsim_device_free(dev0)
- nfc_digital_unregister_device()
This iterates over command queue and frees all commands,
- dev->up = false
- nfcsim_link_shutdown()
- nfcsim_link_recv_wake()
This wakes the sleeping thread nfcsim_link_recv_skb().
- nfcsim_link_recv_skb()
Wake from wait_event_interruptible_timeout(),
call directly the deb->cb callback even though (dev->up == false),
- digital_send_cmd_complete()
Dereference of "struct digital_cmd" cmd which was freed earlier by
nfc_digital_unregister_device().
This causes memory corruption shortly after (with unrelated stack
trace):
nfc nfc0: NFC: nfcsim_recv_wq: Device is down
llcp: nfc_llcp_recv: err -19
nfc nfc1: NFC: nfcsim_recv_wq: Device is down
BUG: unable to handle page fault for address:
ffffffffffffffed
Call Trace:
fsnotify+0x54b/0x5c0
__fsnotify_parent+0x1fe/0x300
? vfs_write+0x27c/0x390
vfs_write+0x27c/0x390
ksys_write+0x63/0xe0
do_syscall_64+0x3b/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xae
KASAN report:
BUG: KASAN: use-after-free in digital_send_cmd_complete+0x16/0x50
Write of size 8 at addr
ffff88800a05f720 by task kworker/0:2/71
Workqueue: events nfcsim_recv_wq [nfcsim]
Call Trace:
dump_stack_lvl+0x45/0x59
print_address_description.constprop.0+0x21/0x140
? digital_send_cmd_complete+0x16/0x50
? digital_send_cmd_complete+0x16/0x50
kasan_report.cold+0x7f/0x11b
? digital_send_cmd_complete+0x16/0x50
? digital_dep_link_down+0x60/0x60
digital_send_cmd_complete+0x16/0x50
nfcsim_recv_wq+0x38f/0x3d5 [nfcsim]
? nfcsim_in_send_cmd+0x4a/0x4a [nfcsim]
? lock_is_held_type+0x98/0x110
? finish_wait+0x110/0x110
? rcu_read_lock_sched_held+0x9c/0xd0
? rcu_read_lock_bh_held+0xb0/0xb0
? lockdep_hardirqs_on_prepare+0x12e/0x1f0
This flow of calling digital_send_cmd_complete() callback on driver exit
is specific to nfcsim which implements reading and sending work queues.
Since the NFC digital device was unregistered, the callback should not
be called.
Fixes:
204bddcb508f ("NFC: nfcsim: Make use of the Digital layer")
Cc: <stable@vger.kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Paul Jakma [Fri, 23 Jul 2021 15:13:04 +0000 (16:13 +0100)]
NIU: fix incorrect error return, missed in previous revert
commit
15bbf8bb4d4ab87108ecf5f4155ec8ffa3c141d6 upstream.
Commit
7930742d6, reverting
26fd962, missed out on reverting an incorrect
change to a return value. The niu_pci_vpd_scan_props(..) == 1 case appears
to be a normal path - treating it as an error and return -EINVAL was
breaking VPD_SCAN and causing the driver to fail to load.
Fix, so my Neptune card works again.
Cc: Kangjie Lu <kjlu@umn.edu>
Cc: Shannon Nelson <shannon.lee.nelson@gmail.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: stable <stable@vger.kernel.org>
Fixes:
7930742d ('Revert "niu: fix missing checks of niu_pci_eeprom_read"')
Signed-off-by: Paul Jakma <paul@jakma.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pavel Skripkin [Tue, 27 Jul 2021 17:00:46 +0000 (20:00 +0300)]
can: esd_usb2: fix memory leak
commit
928150fad41ba16df7fcc9f7f945747d0f56cbb6 upstream.
In esd_usb2_setup_rx_urbs() MAX_RX_URBS coherent buffers are allocated
and there is nothing, that frees them:
1) In callback function the urb is resubmitted and that's all
2) In disconnect function urbs are simply killed, but URB_FREE_BUFFER
is not set (see esd_usb2_setup_rx_urbs) and this flag cannot be used
with coherent buffers.
So, all allocated buffers should be freed with usb_free_coherent()
explicitly.
Side note: This code looks like a copy-paste of other can drivers. The
same patch was applied to mcba_usb driver and it works nice with real
hardware. There is no change in functionality, only clean-up code for
coherent buffers.
Fixes:
96d8e90382dc ("can: Add driver for esd CAN-USB/2 device")
Link: https://lore.kernel.org/r/b31b096926dcb35998ad0271aac4b51770ca7cc8.1627404470.git.paskripkin@gmail.com
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pavel Skripkin [Tue, 27 Jul 2021 17:00:33 +0000 (20:00 +0300)]
can: ems_usb: fix memory leak
commit
9969e3c5f40c166e3396acc36c34f9de502929f6 upstream.
In ems_usb_start() MAX_RX_URBS coherent buffers are allocated and
there is nothing, that frees them:
1) In callback function the urb is resubmitted and that's all
2) In disconnect function urbs are simply killed, but URB_FREE_BUFFER
is not set (see ems_usb_start) and this flag cannot be used with
coherent buffers.
So, all allocated buffers should be freed with usb_free_coherent()
explicitly.
Side note: This code looks like a copy-paste of other can drivers. The
same patch was applied to mcba_usb driver and it works nice with real
hardware. There is no change in functionality, only clean-up code for
coherent buffers.
Fixes:
702171adeed3 ("ems_usb: Added support for EMS CPC-USB/ARM7 CAN/USB interface")
Link: https://lore.kernel.org/r/59aa9fbc9a8cbf9af2bbd2f61a659c480b415800.1627404470.git.paskripkin@gmail.com
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pavel Skripkin [Tue, 27 Jul 2021 16:59:57 +0000 (19:59 +0300)]
can: usb_8dev: fix memory leak
commit
0e865f0c31928d6a313269ef624907eec55287c4 upstream.
In usb_8dev_start() MAX_RX_URBS coherent buffers are allocated and
there is nothing, that frees them:
1) In callback function the urb is resubmitted and that's all
2) In disconnect function urbs are simply killed, but URB_FREE_BUFFER
is not set (see usb_8dev_start) and this flag cannot be used with
coherent buffers.
So, all allocated buffers should be freed with usb_free_coherent()
explicitly.
Side note: This code looks like a copy-paste of other can drivers. The
same patch was applied to mcba_usb driver and it works nice with real
hardware. There is no change in functionality, only clean-up code for
coherent buffers.
Fixes:
0024d8ad1639 ("can: usb_8dev: Add support for USB2CAN interface from 8 devices")
Link: https://lore.kernel.org/r/d39b458cd425a1cf7f512f340224e6e9563b07bd.1627404470.git.paskripkin@gmail.com
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Junxiao Bi [Thu, 29 Jul 2021 21:53:41 +0000 (14:53 -0700)]
ocfs2: issue zeroout to EOF blocks
commit
9449ad33be8480f538b11a593e2dda2fb33ca06d upstream.
For punch holes in EOF blocks, fallocate used buffer write to zero the
EOF blocks in last cluster. But since ->writepage will ignore EOF
pages, those zeros will not be flushed.
This "looks" ok as commit
6bba4471f0cc ("ocfs2: fix data corruption by
fallocate") will zero the EOF blocks when extend the file size, but it
isn't. The problem happened on those EOF pages, before writeback, those
pages had DIRTY flag set and all buffer_head in them also had DIRTY flag
set, when writeback run by write_cache_pages(), DIRTY flag on the page
was cleared, but DIRTY flag on the buffer_head not.
When next write happened to those EOF pages, since buffer_head already
had DIRTY flag set, it would not mark page DIRTY again. That made
writeback ignore them forever. That will cause data corruption. Even
directio write can't work because it will fail when trying to drop pages
caches before direct io, as it found the buffer_head for those pages
still had DIRTY flag set, then it will fall back to buffer io mode.
To make a summary of the issue, as writeback ingores EOF pages, once any
EOF page is generated, any write to it will only go to the page cache,
it will never be flushed to disk even file size extends and that page is
not EOF page any more. The fix is to avoid zero EOF blocks with buffer
write.
The following code snippet from qemu-img could trigger the corruption.
656 open("
6b3711ae-3306-4bdd-823c-
cf1c0060a095.conv.2", O_RDWR|O_DIRECT|O_CLOEXEC) = 11
...
660 fallocate(11, FALLOC_FL_KEEP_SIZE|FALLOC_FL_PUNCH_HOLE,
2275868672, 327680 <unfinished ...>
660 fallocate(11, 0,
2275868672, 327680) = 0
658 pwrite64(11, "
Link: https://lkml.kernel.org/r/20210722054923.24389-2-junxiao.bi@oracle.com
Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Junxiao Bi [Thu, 29 Jul 2021 21:53:38 +0000 (14:53 -0700)]
ocfs2: fix zero out valid data
commit
f267aeb6dea5e468793e5b8eb6a9c72c0020d418 upstream.
If append-dio feature is enabled, direct-io write and fallocate could
run in parallel to extend file size, fallocate used "orig_isize" to
record i_size before taking "ip_alloc_sem", when
ocfs2_zeroout_partial_cluster() zeroout EOF blocks, i_size maybe already
extended by ocfs2_dio_end_io_write(), that will cause valid data zeroed
out.
Link: https://lkml.kernel.org/r/20210722054923.24389-1-junxiao.bi@oracle.com
Fixes:
6bba4471f0cc ("ocfs2: fix data corruption by fallocate")
Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Jun Piao <piaojun@huawei.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Juergen Gross [Thu, 1 Jul 2021 15:41:00 +0000 (17:41 +0200)]
x86/kvm: fix vcpu-id indexed array sizes
commit
76b4f357d0e7d8f6f0013c733e6cba1773c266d3 upstream.
KVM_MAX_VCPU_ID is the maximum vcpu-id of a guest, and not the number
of vcpu-ids. Fix array indexed by vcpu-id to have KVM_MAX_VCPU_ID+1
elements.
Note that this is currently no real problem, as KVM_MAX_VCPU_ID is
an odd number, resulting in always enough padding being available at
the end of those arrays.
Nevertheless this should be fixed in order to avoid rare problems in
case someone is using an even number for KVM_MAX_VCPU_ID.
Signed-off-by: Juergen Gross <jgross@suse.com>
Message-Id: <
20210701154105.23215-2-jgross@suse.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Russell King [Fri, 29 Jan 2021 10:19:07 +0000 (10:19 +0000)]
ARM: ensure the signal page contains defined contents
commit
9c698bff66ab4914bb3d71da7dc6112519bde23e upstream.
Ensure that the signal page contains our poison instruction to increase
the protection against ROP attacks and also contains well defined
contents.
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Nobuhiro Iwamatsu (CIP) <nobuhiro1.iwamatsu@toshiba.co.jp>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Matthew Wilcox [Fri, 8 Sep 2017 23:13:48 +0000 (16:13 -0700)]
lib/string.c: add multibyte memset functions
commit
3b3c4babd898715926d24ae10aa64778ace33aae upstream.
Patch series "Multibyte memset variations", v4.
A relatively common idiom we're missing is a function to fill an area of
memory with a pattern which is larger than a single byte. I first
noticed this with a zram patch which wanted to fill a page with an
'unsigned long' value. There turn out to be quite a few places in the
kernel which can benefit from using an optimised function rather than a
loop; sometimes text size, sometimes speed, and sometimes both. The
optimised PowerPC version (not included here) improves performance by
about 30% on POWER8 on just the raw memset_l().
Most of the extra lines of code come from the three testcases I added.
This patch (of 8):
memset16(), memset32() and memset64() are like memset(), but allow the
caller to fill the destination with a value larger than a single byte.
memset_l() and memset_p() allow the caller to use unsigned long and
pointer values respectively.
Link: http://lkml.kernel.org/r/20170720184539.31609-2-willy@infradead.org
Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: "James E.J. Bottomley" <jejb@linux.vnet.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: David Miller <davem@davemloft.net>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Russell King <rmk+kernel@armlinux.org.uk>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Nobuhiro Iwamatsu (CIP) <nobuhiro1.iwamatsu@toshiba.co.jp>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sudeep Holla [Thu, 1 Jul 2021 13:21:18 +0000 (14:21 +0100)]
ARM: dts: versatile: Fix up interrupt controller node names
[ Upstream commit
82a1c67554dff610d6be4e1982c425717b3c6a23 ]
Once the new schema interrupt-controller/arm,vic.yaml is added, we get
the below warnings:
arch/arm/boot/dts/versatile-ab.dt.yaml:
intc@
10140000: $nodename:0: 'intc@
10140000' does not match
'^interrupt-controller(@[0-9a-f,]+)*$'
arch/arm/boot/dts/versatile-ab.dt.yaml:
intc@
10140000: 'clear-mask' does not match any of the regexes
Fix the node names for the interrupt controller to conform
to the standard node name interrupt-controller@.. Also drop invalid
clear-mask property.
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20210701132118.759454-1-sudeep.holla@arm.com'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Desmond Cheong Zhi Xi [Thu, 15 Jul 2021 04:27:08 +0000 (21:27 -0700)]
hfs: add lock nesting notation to hfs_find_init
[ Upstream commit
b3b2177a2d795e35dc11597b2609eb1e7e57e570 ]
Syzbot reports a possible recursive lock in [1].
This happens due to missing lock nesting information. From the logs, we
see that a call to hfs_fill_super is made to mount the hfs filesystem.
While searching for the root inode, the lock on the catalog btree is
grabbed. Then, when the parent of the root isn't found, a call to
__hfs_bnode_create is made to create the parent of the root. This
eventually leads to a call to hfs_ext_read_extent which grabs a lock on
the extents btree.
Since the order of locking is catalog btree -> extents btree, this lock
hierarchy does not lead to a deadlock.
To tell lockdep that this locking is safe, we add nesting notation to
distinguish between catalog btrees, extents btrees, and attributes
btrees (for HFS+). This has already been done in hfsplus.
Link: https://syzkaller.appspot.com/bug?id=f007ef1d7a31a469e3be7aeb0fde0769b18585db
Link: https://lkml.kernel.org/r/20210701030756.58760-4-desmondcheongzx@gmail.com
Signed-off-by: Desmond Cheong Zhi Xi <desmondcheongzx@gmail.com>
Reported-by: syzbot+b718ec84a87b7e73ade4@syzkaller.appspotmail.com
Tested-by: syzbot+b718ec84a87b7e73ade4@syzkaller.appspotmail.com
Reviewed-by: Viacheslav Dubeyko <slava@dubeyko.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Gustavo A. R. Silva <gustavoars@kernel.org>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Desmond Cheong Zhi Xi [Thu, 15 Jul 2021 04:27:05 +0000 (21:27 -0700)]
hfs: fix high memory mapping in hfs_bnode_read
[ Upstream commit
54a5ead6f5e2b47131a7385d0c0af18e7b89cb02 ]
Pages that we read in hfs_bnode_read need to be kmapped into kernel
address space. However, currently only the 0th page is kmapped. If the
given offset + length exceeds this 0th page, then we have an invalid
memory access.
To fix this, we kmap relevant pages one by one and copy their relevant
portions of data.
An example of invalid memory access occurring without this fix can be seen
in the following crash report:
==================================================================
BUG: KASAN: use-after-free in memcpy include/linux/fortify-string.h:191 [inline]
BUG: KASAN: use-after-free in hfs_bnode_read+0xc4/0xe0 fs/hfs/bnode.c:26
Read of size 2 at addr
ffff888125fdcffe by task syz-executor5/4634
CPU: 0 PID: 4634 Comm: syz-executor5 Not tainted 5.13.0-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:79 [inline]
dump_stack+0x195/0x1f8 lib/dump_stack.c:120
print_address_description.constprop.0+0x1d/0x110 mm/kasan/report.c:233
__kasan_report mm/kasan/report.c:419 [inline]
kasan_report.cold+0x7b/0xd4 mm/kasan/report.c:436
check_region_inline mm/kasan/generic.c:180 [inline]
kasan_check_range+0x154/0x1b0 mm/kasan/generic.c:186
memcpy+0x24/0x60 mm/kasan/shadow.c:65
memcpy include/linux/fortify-string.h:191 [inline]
hfs_bnode_read+0xc4/0xe0 fs/hfs/bnode.c:26
hfs_bnode_read_u16 fs/hfs/bnode.c:34 [inline]
hfs_bnode_find+0x880/0xcc0 fs/hfs/bnode.c:365
hfs_brec_find+0x2d8/0x540 fs/hfs/bfind.c:126
hfs_brec_read+0x27/0x120 fs/hfs/bfind.c:165
hfs_cat_find_brec+0x19a/0x3b0 fs/hfs/catalog.c:194
hfs_fill_super+0xc13/0x1460 fs/hfs/super.c:419
mount_bdev+0x331/0x3f0 fs/super.c:1368
hfs_mount+0x35/0x40 fs/hfs/super.c:457
legacy_get_tree+0x10c/0x220 fs/fs_context.c:592
vfs_get_tree+0x93/0x300 fs/super.c:1498
do_new_mount fs/namespace.c:2905 [inline]
path_mount+0x13f5/0x20e0 fs/namespace.c:3235
do_mount fs/namespace.c:3248 [inline]
__do_sys_mount fs/namespace.c:3456 [inline]
__se_sys_mount fs/namespace.c:3433 [inline]
__x64_sys_mount+0x2b8/0x340 fs/namespace.c:3433
do_syscall_64+0x37/0xc0 arch/x86/entry/common.c:47
entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x45e63a
Code: 48 c7 c2 bc ff ff ff f7 d8 64 89 02 b8 ff ff ff ff eb d2 e8 88 04 00 00 0f 1f 84 00 00 00 00 00 49 89 ca b8 a5 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48
RSP: 002b:
00007f9404d410d8 EFLAGS:
00000246 ORIG_RAX:
00000000000000a5
RAX:
ffffffffffffffda RBX:
0000000020000248 RCX:
000000000045e63a
RDX:
0000000020000000 RSI:
0000000020000100 RDI:
00007f9404d41120
RBP:
00007f9404d41120 R08:
00000000200002c0 R09:
0000000020000000
R10:
0000000000000000 R11:
0000000000000246 R12:
0000000000000003
R13:
0000000000000003 R14:
00000000004ad5d8 R15:
0000000000000000
The buggy address belongs to the page:
page:
00000000dadbcf3e refcount:0 mapcount:0 mapping:
0000000000000000 index:0x1 pfn:0x125fdc
flags: 0x2fffc0000000000(node=0|zone=2|lastcpupid=0x3fff)
raw:
02fffc0000000000 ffffea000497f748 ffffea000497f6c8 0000000000000000
raw:
0000000000000001 0000000000000000 00000000ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff888125fdce80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ffff888125fdcf00: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>
ffff888125fdcf80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
^
ffff888125fdd000: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ffff888125fdd080: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
==================================================================
Link: https://lkml.kernel.org/r/20210701030756.58760-3-desmondcheongzx@gmail.com
Signed-off-by: Desmond Cheong Zhi Xi <desmondcheongzx@gmail.com>
Reviewed-by: Viacheslav Dubeyko <slava@dubeyko.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Gustavo A. R. Silva <gustavoars@kernel.org>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Desmond Cheong Zhi Xi [Thu, 15 Jul 2021 04:27:01 +0000 (21:27 -0700)]
hfs: add missing clean-up in hfs_fill_super
[ Upstream commit
16ee572eaf0d09daa4c8a755fdb71e40dbf8562d ]
Patch series "hfs: fix various errors", v2.
This series ultimately aims to address a lockdep warning in
hfs_find_init reported by Syzbot [1].
The work done for this led to the discovery of another bug, and the
Syzkaller repro test also reveals an invalid memory access error after
clearing the lockdep warning. Hence, this series is broken up into
three patches:
1. Add a missing call to hfs_find_exit for an error path in
hfs_fill_super
2. Fix memory mapping in hfs_bnode_read by fixing calls to kmap
3. Add lock nesting notation to tell lockdep that the observed locking
hierarchy is safe
This patch (of 3):
Before exiting hfs_fill_super, the struct hfs_find_data used in
hfs_find_init should be passed to hfs_find_exit to be cleaned up, and to
release the lock held on the btree.
The call to hfs_find_exit is missing from an error path. We add it back
in by consolidating calls to hfs_find_exit for error paths.
Link: https://syzkaller.appspot.com/bug?id=f007ef1d7a31a469e3be7aeb0fde0769b18585db
Link: https://lkml.kernel.org/r/20210701030756.58760-1-desmondcheongzx@gmail.com
Link: https://lkml.kernel.org/r/20210701030756.58760-2-desmondcheongzx@gmail.com
Signed-off-by: Desmond Cheong Zhi Xi <desmondcheongzx@gmail.com>
Reviewed-by: Viacheslav Dubeyko <slava@dubeyko.com>
Cc: Gustavo A. R. Silva <gustavoars@kernel.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Xin Long [Wed, 30 Jun 2021 03:34:08 +0000 (23:34 -0400)]
sctp: move 198 addresses from unusable to private scope
[ Upstream commit
1d11fa231cabeae09a95cb3e4cf1d9dd34e00f08 ]
The doc draft-stewart-tsvwg-sctp-ipv4-00 that restricts 198 addresses
was never published. These addresses as private addresses should be
allowed to use in SCTP.
As Michael Tuexen suggested, this patch is to move 198 addresses from
unusable to private scope.
Reported-by: Sérgio <surkamp@gmail.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yang Yingliang [Tue, 29 Jun 2021 11:53:28 +0000 (19:53 +0800)]
net/802/garp: fix memleak in garp_request_join()
[ Upstream commit
42ca63f980842918560b25f0244307fd83b4777c ]
I got kmemleak report when doing fuzz test:
BUG: memory leak
unreferenced object 0xffff88810c909b80 (size 64):
comm "syz", pid 957, jiffies
4295220394 (age 399.090s)
hex dump (first 32 bytes):
01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 08 00 00 00 01 02 00 04 ................
backtrace:
[<
00000000ca1f2e2e>] garp_request_join+0x285/0x3d0
[<
00000000bf153351>] vlan_gvrp_request_join+0x15b/0x190
[<
0000000024005e72>] vlan_dev_open+0x706/0x980
[<
00000000dc20c4d4>] __dev_open+0x2bb/0x460
[<
0000000066573004>] __dev_change_flags+0x501/0x650
[<
0000000035b42f83>] rtnl_configure_link+0xee/0x280
[<
00000000a5e69de0>] __rtnl_newlink+0xed5/0x1550
[<
00000000a5258f4a>] rtnl_newlink+0x66/0x90
[<
00000000506568ee>] rtnetlink_rcv_msg+0x439/0xbd0
[<
00000000b7eaeae1>] netlink_rcv_skb+0x14d/0x420
[<
00000000c373ce66>] netlink_unicast+0x550/0x750
[<
00000000ec74ce74>] netlink_sendmsg+0x88b/0xda0
[<
00000000381ff246>] sock_sendmsg+0xc9/0x120
[<
000000008f6a2db3>] ____sys_sendmsg+0x6e8/0x820
[<
000000008d9c1735>] ___sys_sendmsg+0x145/0x1c0
[<
00000000aa39dd8b>] __sys_sendmsg+0xfe/0x1d0
Calling garp_request_leave() after garp_request_join(), the attr->state
is set to GARP_APPLICANT_VO, garp_attr_destroy() won't be called in last
transmit event in garp_uninit_applicant(), the attr of applicant will be
leaked. To fix this leak, iterate and free each attr of applicant before
rerturning from garp_uninit_applicant().
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yang Yingliang [Tue, 29 Jun 2021 07:22:37 +0000 (15:22 +0800)]
net/802/mrp: fix memleak in mrp_request_join()
[ Upstream commit
996af62167d0e0ec69b938a3561e96f84ffff1aa ]
I got kmemleak report when doing fuzz test:
BUG: memory leak
unreferenced object 0xffff88810c239500 (size 64):
comm "syz-executor940", pid 882, jiffies
4294712870 (age 14.631s)
hex dump (first 32 bytes):
01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 01 00 00 00 01 02 00 04 ................
backtrace:
[<
00000000a323afa4>] slab_alloc_node mm/slub.c:2972 [inline]
[<
00000000a323afa4>] slab_alloc mm/slub.c:2980 [inline]
[<
00000000a323afa4>] __kmalloc+0x167/0x340 mm/slub.c:4130
[<
000000005034ca11>] kmalloc include/linux/slab.h:595 [inline]
[<
000000005034ca11>] mrp_attr_create net/802/mrp.c:276 [inline]
[<
000000005034ca11>] mrp_request_join+0x265/0x550 net/802/mrp.c:530
[<
00000000fcfd81f3>] vlan_mvrp_request_join+0x145/0x170 net/8021q/vlan_mvrp.c:40
[<
000000009258546e>] vlan_dev_open+0x477/0x890 net/8021q/vlan_dev.c:292
[<
0000000059acd82b>] __dev_open+0x281/0x410 net/core/dev.c:1609
[<
000000004e6dc695>] __dev_change_flags+0x424/0x560 net/core/dev.c:8767
[<
00000000471a09af>] rtnl_configure_link+0xd9/0x210 net/core/rtnetlink.c:3122
[<
0000000037a4672b>] __rtnl_newlink+0xe08/0x13e0 net/core/rtnetlink.c:3448
[<
000000008d5d0fda>] rtnl_newlink+0x64/0xa0 net/core/rtnetlink.c:3488
[<
000000004882fe39>] rtnetlink_rcv_msg+0x369/0xa10 net/core/rtnetlink.c:5552
[<
00000000907e6c54>] netlink_rcv_skb+0x134/0x3d0 net/netlink/af_netlink.c:2504
[<
00000000e7d7a8c4>] netlink_unicast_kernel net/netlink/af_netlink.c:1314 [inline]
[<
00000000e7d7a8c4>] netlink_unicast+0x4a0/0x6a0 net/netlink/af_netlink.c:1340
[<
00000000e0645d50>] netlink_sendmsg+0x78e/0xc90 net/netlink/af_netlink.c:1929
[<
00000000c24559b7>] sock_sendmsg_nosec net/socket.c:654 [inline]
[<
00000000c24559b7>] sock_sendmsg+0x139/0x170 net/socket.c:674
[<
00000000fc210bc2>] ____sys_sendmsg+0x658/0x7d0 net/socket.c:2350
[<
00000000be4577b5>] ___sys_sendmsg+0xf8/0x170 net/socket.c:2404
Calling mrp_request_leave() after mrp_request_join(), the attr->state
is set to MRP_APPLICANT_VO, mrp_attr_destroy() won't be called in last
TX event in mrp_uninit_applicant(), the attr of applicant will be leaked.
To fix this leak, iterate and free each attr of applicant before rerturning
from mrp_uninit_applicant().
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yang Yingliang [Wed, 14 Jul 2021 09:19:33 +0000 (17:19 +0800)]
workqueue: fix UAF in pwq_unbound_release_workfn()
commit
b42b0bddcbc87b4c66f6497f66fc72d52b712aa7 upstream.
I got a UAF report when doing fuzz test:
[ 152.880091][ T8030] ==================================================================
[ 152.881240][ T8030] BUG: KASAN: use-after-free in pwq_unbound_release_workfn+0x50/0x190
[ 152.882442][ T8030] Read of size 4 at addr
ffff88810d31bd00 by task kworker/3:2/8030
[ 152.883578][ T8030]
[ 152.883932][ T8030] CPU: 3 PID: 8030 Comm: kworker/3:2 Not tainted 5.13.0+ #249
[ 152.885014][ T8030] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014
[ 152.886442][ T8030] Workqueue: events pwq_unbound_release_workfn
[ 152.887358][ T8030] Call Trace:
[ 152.887837][ T8030] dump_stack_lvl+0x75/0x9b
[ 152.888525][ T8030] ? pwq_unbound_release_workfn+0x50/0x190
[ 152.889371][ T8030] print_address_description.constprop.10+0x48/0x70
[ 152.890326][ T8030] ? pwq_unbound_release_workfn+0x50/0x190
[ 152.891163][ T8030] ? pwq_unbound_release_workfn+0x50/0x190
[ 152.891999][ T8030] kasan_report.cold.15+0x82/0xdb
[ 152.892740][ T8030] ? pwq_unbound_release_workfn+0x50/0x190
[ 152.893594][ T8030] __asan_load4+0x69/0x90
[ 152.894243][ T8030] pwq_unbound_release_workfn+0x50/0x190
[ 152.895057][ T8030] process_one_work+0x47b/0x890
[ 152.895778][ T8030] worker_thread+0x5c/0x790
[ 152.896439][ T8030] ? process_one_work+0x890/0x890
[ 152.897163][ T8030] kthread+0x223/0x250
[ 152.897747][ T8030] ? set_kthread_struct+0xb0/0xb0
[ 152.898471][ T8030] ret_from_fork+0x1f/0x30
[ 152.899114][ T8030]
[ 152.899446][ T8030] Allocated by task 8884:
[ 152.900084][ T8030] kasan_save_stack+0x21/0x50
[ 152.900769][ T8030] __kasan_kmalloc+0x88/0xb0
[ 152.901416][ T8030] __kmalloc+0x29c/0x460
[ 152.902014][ T8030] alloc_workqueue+0x111/0x8e0
[ 152.902690][ T8030] __btrfs_alloc_workqueue+0x11e/0x2a0
[ 152.903459][ T8030] btrfs_alloc_workqueue+0x6d/0x1d0
[ 152.904198][ T8030] scrub_workers_get+0x1e8/0x490
[ 152.904929][ T8030] btrfs_scrub_dev+0x1b9/0x9c0
[ 152.905599][ T8030] btrfs_ioctl+0x122c/0x4e50
[ 152.906247][ T8030] __x64_sys_ioctl+0x137/0x190
[ 152.906916][ T8030] do_syscall_64+0x34/0xb0
[ 152.907535][ T8030] entry_SYSCALL_64_after_hwframe+0x44/0xae
[ 152.908365][ T8030]
[ 152.908688][ T8030] Freed by task 8884:
[ 152.909243][ T8030] kasan_save_stack+0x21/0x50
[ 152.909893][ T8030] kasan_set_track+0x20/0x30
[ 152.910541][ T8030] kasan_set_free_info+0x24/0x40
[ 152.911265][ T8030] __kasan_slab_free+0xf7/0x140
[ 152.911964][ T8030] kfree+0x9e/0x3d0
[ 152.912501][ T8030] alloc_workqueue+0x7d7/0x8e0
[ 152.913182][ T8030] __btrfs_alloc_workqueue+0x11e/0x2a0
[ 152.913949][ T8030] btrfs_alloc_workqueue+0x6d/0x1d0
[ 152.914703][ T8030] scrub_workers_get+0x1e8/0x490
[ 152.915402][ T8030] btrfs_scrub_dev+0x1b9/0x9c0
[ 152.916077][ T8030] btrfs_ioctl+0x122c/0x4e50
[ 152.916729][ T8030] __x64_sys_ioctl+0x137/0x190
[ 152.917414][ T8030] do_syscall_64+0x34/0xb0
[ 152.918034][ T8030] entry_SYSCALL_64_after_hwframe+0x44/0xae
[ 152.918872][ T8030]
[ 152.919203][ T8030] The buggy address belongs to the object at
ffff88810d31bc00
[ 152.919203][ T8030] which belongs to the cache kmalloc-512 of size 512
[ 152.921155][ T8030] The buggy address is located 256 bytes inside of
[ 152.921155][ T8030] 512-byte region [
ffff88810d31bc00,
ffff88810d31be00)
[ 152.922993][ T8030] The buggy address belongs to the page:
[ 152.923800][ T8030] page:
ffffea000434c600 refcount:1 mapcount:0 mapping:
0000000000000000 index:0x0 pfn:0x10d318
[ 152.925249][ T8030] head:
ffffea000434c600 order:2 compound_mapcount:0 compound_pincount:0
[ 152.926399][ T8030] flags: 0x57ff00000010200(slab|head|node=1|zone=2|lastcpupid=0x7ff)
[ 152.927515][ T8030] raw:
057ff00000010200 dead000000000100 dead000000000122 ffff888009c42c80
[ 152.928716][ T8030] raw:
0000000000000000 0000000080100010 00000001ffffffff 0000000000000000
[ 152.929890][ T8030] page dumped because: kasan: bad access detected
[ 152.930759][ T8030]
[ 152.931076][ T8030] Memory state around the buggy address:
[ 152.931851][ T8030]
ffff88810d31bc00: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 152.932967][ T8030]
ffff88810d31bc80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 152.934068][ T8030] >
ffff88810d31bd00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 152.935189][ T8030] ^
[ 152.935763][ T8030]
ffff88810d31bd80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 152.936847][ T8030]
ffff88810d31be00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 152.937940][ T8030] ==================================================================
If apply_wqattrs_prepare() fails in alloc_workqueue(), it will call put_pwq()
which invoke a work queue to call pwq_unbound_release_workfn() and use the 'wq'.
The 'wq' allocated in alloc_workqueue() will be freed in error path when
apply_wqattrs_prepare() fails. So it will lead a UAF.
CPU0 CPU1
alloc_workqueue()
alloc_and_link_pwqs()
apply_wqattrs_prepare() fails
apply_wqattrs_cleanup()
schedule_work(&pwq->unbound_release_work)
kfree(wq)
worker_thread()
pwq_unbound_release_workfn() <- trigger uaf here
If apply_wqattrs_prepare() fails, the new pwq are not linked, it doesn't
hold any reference to the 'wq', 'wq' is invalid to access in the worker,
so add check pwq if linked to fix this.
Fixes:
2d5f0764b526 ("workqueue: split apply_workqueue_attrs() into 3 stages")
Cc: stable@vger.kernel.org # v4.2+
Reported-by: Hulk Robot <hulkci@huawei.com>
Suggested-by: Lai Jiangshan <jiangshanlai@gmail.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Lai Jiangshan <jiangshanlai@gmail.com>
Tested-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Miklos Szeredi [Wed, 28 Jul 2021 12:47:20 +0000 (14:47 +0200)]
af_unix: fix garbage collect vs MSG_PEEK
commit
cbcf01128d0a92e131bd09f1688fe032480b65ca upstream.
unix_gc() assumes that candidate sockets can never gain an external
reference (i.e. be installed into an fd) while the unix_gc_lock is
held. Except for MSG_PEEK this is guaranteed by modifying inflight
count under the unix_gc_lock.
MSG_PEEK does not touch any variable protected by unix_gc_lock (file
count is not), yet it needs to be serialized with garbage collection.
Do this by locking/unlocking unix_gc_lock:
1) increment file count
2) lock/unlock barrier to make sure incremented file count is visible
to garbage collection
3) install file into fd
This is a lock barrier (unlike smp_mb()) that ensures that garbage
collection is run completely before or completely after the barrier.
Cc: <stable@vger.kernel.org>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jens Axboe [Fri, 8 Feb 2019 16:01:44 +0000 (09:01 -0700)]
net: split out functions related to registering inflight socket files
commit
f4e65870e5cede5ca1ec0006b6c9803994e5f7b8 upstream.
We need this functionality for the io_uring file registration, but
we cannot rely on it since CONFIG_UNIX can be modular. Move the helpers
to a separate file, that's always builtin to the kernel if CONFIG_UNIX is
m/y.
No functional changes in this patch, just moving code around.
Reviewed-by: Hannes Reinecke <hare@suse.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
[ backported to older kernels to get access to unix_gc_lock - gregkh ]
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Nathan Chancellor [Tue, 27 Jul 2021 22:56:50 +0000 (15:56 -0700)]
tipc: Fix backport of
b77413446408fdd256599daf00d5be72b5f3e7c6
Clang warns:
net/tipc/link.c:896:23: warning: variable 'hdr' is uninitialized when
used here [-Wuninitialized]
imp = msg_importance(hdr);
^~~
net/tipc/link.c:890:22: note: initialize the variable 'hdr' to silence
this warning
struct tipc_msg *hdr;
^
= NULL
1 warning generated.
The backport of commit
b77413446408 ("tipc: fix NULL deref in
tipc_link_xmit()") to 4.9 as commit
310014f572a5 ("tipc: fix NULL deref
in tipc_link_xmit()") added the hdr initialization above the
if (unlikely(msg_size(hdr) > mtu)) {
like in the upstream commit; however, in 4.9, that check is below imp's
first use because commit
365ad353c256 ("tipc: reduce risk of user
starvation during link congestion") is not present. This results in hdr
being used uninitialized.
Fix this by moving hdr's initialization before imp and after the if
check like the original backport did.
Cc: Hoang Le <hoang.h.le@dektech.com.au>
Cc: Jon Maloy <jon.maloy@ericsson.com>
Cc: Ying Xue <ying.xue@windriver.com>
Fixes:
310014f572a5 ("tipc: fix NULL deref in tipc_link_xmit()")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Nathan Chancellor [Tue, 27 Jul 2021 22:56:49 +0000 (15:56 -0700)]
iommu/amd: Fix backport of
140456f994195b568ecd7fc2287a34eadffef3ca
Clang warns:
drivers/iommu/amd_iommu.c:1335:6: warning: variable 'flags' is used
uninitialized whenever 'if' condition is true
[-Wsometimes-uninitialized]
if (!pte)
^~~~
drivers/iommu/amd_iommu.c:1352:40: note: uninitialized use occurs here
spin_unlock_irqrestore(&domain->lock, flags);
^~~~~
drivers/iommu/amd_iommu.c:1335:2: note: remove the 'if' if its condition
is always false
if (!pte)
^~~~~~~~~
drivers/iommu/amd_iommu.c:1331:21: note: initialize the variable 'flags'
to silence this warning
unsigned long flags;
^
= 0
1 warning generated.
The backport of commit
140456f99419 ("iommu/amd: Fix sleeping in atomic
in increase_address_space()") to 4.9 as commit
1d648460d7c5 ("iommu/amd:
Fix sleeping in atomic in increase_address_space()") failed to keep the
"return false", which in 4.9 needs to be a regular "return" due to a
lack of commit
f15d9a992f90 ("iommu/amd: Remove domain->updated").
This resolves the warning and matches the 4.14-4.19 backport.
Cc: Andrey Ryabinin <arbn@yandex-team.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Will Deacon <will@kernel.org>
Fixes:
1d648460d7c5 ("iommu/amd: Fix sleeping in atomic in increase_address_space()")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Acked-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Wed, 28 Jul 2021 07:14:29 +0000 (09:14 +0200)]
Linux 4.9.277
Link: https://lore.kernel.org/r/20210726153824.868160836@linuxfoundation.org
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20210727061343.233942938@linuxfoundation.org
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
David Sterba [Mon, 14 Jun 2021 10:45:18 +0000 (12:45 +0200)]
btrfs: compression: don't try to compress if we don't have enough pages
commit
f2165627319ffd33a6217275e5690b1ab5c45763 upstream
The early check if we should attempt compression does not take into
account the number of input pages. It can happen that there's only one
page, eg. a tail page after some ranges of the BTRFS_MAX_UNCOMPRESSED
have been processed, or an isolated page that won't be converted to an
inline extent.
The single page would be compressed but a later check would drop it
again because the result size must be at least one block shorter than
the input. That can never work with just one page.
CC: stable@vger.kernel.org # 4.4+
Signed-off-by: David Sterba <dsterba@suse.com>
[sudip: adjust context]
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stephan Gerhold [Wed, 26 May 2021 09:44:07 +0000 (11:44 +0200)]
iio: accel: bma180: Fix BMA25x bandwidth register values
commit
8090d67421ddab0ae932abab5a60200598bf0bbb upstream
According to the BMA253 datasheet [1] and BMA250 datasheet [2] the
bandwidth value for BMA25x should be set as 01xxx:
"Settings 00xxx result in a bandwidth of 7.81 Hz; [...]
It is recommended [...] to use the range from ´01000b´ to ´01111b´
only in order to be compatible with future products."
However, at the moment the drivers sets bandwidth values from 0 to 6,
which is not recommended and always results into 7.81 Hz bandwidth
according to the datasheet.
Fix this by introducing a bw_offset = 8 = 01000b for BMA25x,
so the additional bit is always set for BMA25x.
[1]: https://www.bosch-sensortec.com/media/boschsensortec/downloads/datasheets/bst-bma253-ds000.pdf
[2]: https://datasheet.octopart.com/BMA250-Bosch-datasheet-
15540103.pdf
Cc: Peter Meerwald <pmeerw@pmeerw.net>
Fixes:
2017cff24cc0 ("iio:bma180: Add BMA250 chip support")
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20210526094408.34298-2-stephan@gerhold.net
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
[sudip: adjust context]
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Linus Walleij [Wed, 11 Dec 2019 21:38:18 +0000 (22:38 +0100)]
iio: accel: bma180: Use explicit member assignment
commit
9436abc40139503a7cea22a96437697d048f31c0 upstream
This uses the C99 explicit .member assignment for the
variant data in struct bma180_part_info. This makes it
easier to understand and add new variants.
Cc: Peter Meerwald <pmeerw@pmeerw.net>
Cc: Oleksandr Kravchenko <o.v.kravchenko@globallogic.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Doug Berger [Wed, 30 Jun 2021 00:14:19 +0000 (17:14 -0700)]
net: bcmgenet: ensure EXT_ENERGY_DET_MASK is clear
commit
5a3c680aa2c12c90c44af383fe6882a39875ab81 upstream.
Setting the EXT_ENERGY_DET_MASK bit allows the port energy detection
logic of the internal PHY to prevent the system from sleeping. Some
internal PHYs will report that energy is detected when the network
interface is closed which can prevent the system from going to sleep
if WoL is enabled when the interface is brought down.
Since the driver does not support waking the system on this logic,
this commit clears the bit whenever the internal PHY is powered up
and the other logic for manipulating the bit is removed since it
serves no useful function.
Fixes:
1c1008c793fa ("net: bcmgenet: add main driver file")
Signed-off-by: Doug Berger <opendmb@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Gustavo A. R. Silva [Mon, 19 Apr 2021 23:43:32 +0000 (18:43 -0500)]
media: ngene: Fix out-of-bounds bug in ngene_command_config_free_buf()
commit
8d4abca95ecc82fc8c41912fa0085281f19cc29f upstream.
Fix an 11-year old bug in ngene_command_config_free_buf() while
addressing the following warnings caught with -Warray-bounds:
arch/alpha/include/asm/string.h:22:16: warning: '__builtin_memcpy' offset [12, 16] from the object at 'com' is out of the bounds of referenced subobject 'config' with type 'unsigned char' at offset 10 [-Warray-bounds]
arch/x86/include/asm/string_32.h:182:25: warning: '__builtin_memcpy' offset [12, 16] from the object at 'com' is out of the bounds of referenced subobject 'config' with type 'unsigned char' at offset 10 [-Warray-bounds]
The problem is that the original code is trying to copy 6 bytes of
data into a one-byte size member _config_ of the wrong structue
FW_CONFIGURE_BUFFERS, in a single call to memcpy(). This causes a
legitimate compiler warning because memcpy() overruns the length
of &com.cmd.ConfigureBuffers.config. It seems that the right
structure is FW_CONFIGURE_FREE_BUFFERS, instead, because it contains
6 more members apart from the header _hdr_. Also, the name of
the function ngene_command_config_free_buf() suggests that the actual
intention is to ConfigureFreeBuffers, instead of ConfigureBuffers
(which takes place in the function ngene_command_config_buf(), above).
Fix this by enclosing those 6 members of struct FW_CONFIGURE_FREE_BUFFERS
into new struct config, and use &com.cmd.ConfigureFreeBuffers.config as
the destination address, instead of &com.cmd.ConfigureBuffers.config,
when calling memcpy().
This also helps with the ongoing efforts to globally enable
-Warray-bounds and get us closer to being able to tighten the
FORTIFY_SOURCE routines on memcpy().
Link: https://github.com/KSPP/linux/issues/109
Fixes:
dae52d009fc9 ("V4L/DVB: ngene: Initial check-in")
Cc: stable@vger.kernel.org
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/linux-hardening/20210420001631.GA45456@embeddedor/
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Haoran Luo [Wed, 21 Jul 2021 14:12:07 +0000 (14:12 +0000)]
tracing: Fix bug in rb_per_cpu_empty() that might cause deadloop.
commit
67f0d6d9883c13174669f88adac4f0ee656cc16a upstream.
The "rb_per_cpu_empty()" misinterpret the condition (as not-empty) when
"head_page" and "commit_page" of "struct ring_buffer_per_cpu" points to
the same buffer page, whose "buffer_data_page" is empty and "read" field
is non-zero.
An error scenario could be constructed as followed (kernel perspective):
1. All pages in the buffer has been accessed by reader(s) so that all of
them will have non-zero "read" field.
2. Read and clear all buffer pages so that "rb_num_of_entries()" will
return 0 rendering there's no more data to read. It is also required
that the "read_page", "commit_page" and "tail_page" points to the same
page, while "head_page" is the next page of them.
3. Invoke "ring_buffer_lock_reserve()" with large enough "length"
so that it shot pass the end of current tail buffer page. Now the
"head_page", "commit_page" and "tail_page" points to the same page.
4. Discard current event with "ring_buffer_discard_commit()", so that
"head_page", "commit_page" and "tail_page" points to a page whose buffer
data page is now empty.
When the error scenario has been constructed, "tracing_read_pipe" will
be trapped inside a deadloop: "trace_empty()" returns 0 since
"rb_per_cpu_empty()" returns 0 when it hits the CPU containing such
constructed ring buffer. Then "trace_find_next_entry_inc()" always
return NULL since "rb_num_of_entries()" reports there's no more entry
to read. Finally "trace_seq_to_user()" returns "-EBUSY" spanking
"tracing_read_pipe" back to the start of the "waitagain" loop.
I've also written a proof-of-concept script to construct the scenario
and trigger the bug automatically, you can use it to trace and validate
my reasoning above:
https://github.com/aegistudio/RingBufferDetonator.git
Tests has been carried out on linux kernel 5.14-rc2
(
2734d6c1b1a089fb593ef6a23d4b70903526fe0c), my fixed version
of kernel (for testing whether my update fixes the bug) and
some older kernels (for range of affected kernels). Test result is
also attached to the proof-of-concept repository.
Link: https://lore.kernel.org/linux-trace-devel/YPaNxsIlb2yjSi5Y@aegistudio/
Link: https://lore.kernel.org/linux-trace-devel/YPgrN85WL9VyrZ55@aegistudio
Cc: stable@vger.kernel.org
Fixes:
bf41a158cacba ("ring-buffer: make reentrant")
Suggested-by: Linus Torvalds <torvalds@linuxfoundation.org>
Signed-off-by: Haoran Luo <www@aegistudio.net>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
John Keeping [Wed, 21 Jul 2021 16:17:45 +0000 (17:17 +0100)]
USB: serial: cp210x: add ID for CEL EM3588 USB ZigBee stick
commit
d6a206e60124a9759dd7f6dfb86b0e1d3b1df82e upstream.
Add the USB serial device ID for the CEL ZigBee EM3588 radio stick.
Signed-off-by: John Keeping <john@metanate.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Ray [Mon, 19 Jul 2021 16:43:49 +0000 (18:43 +0200)]
USB: serial: cp210x: fix comments for GE CS1000
commit
e9db418d4b828dd049caaf5ed65dc86f93bb1a0c upstream.
Fix comments for GE CS1000 CP210x USB ID assignments.
Fixes:
42213a0190b5 ("USB: serial: cp210x: add some more GE USB IDs")
Signed-off-by: Ian Ray <ian.ray@ge.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Marco De Marco [Mon, 5 Jul 2021 19:44:21 +0000 (19:44 +0000)]
USB: serial: option: add support for u-blox LARA-R6 family
commit
94b619a07655805a1622484967754f5848640456 upstream.
The patch is meant to support LARA-R6 Cat 1 module family.
Module USB ID:
Vendor ID: 0x05c6
Product ID: 0x90fA
Interface layout:
If 0: Diagnostic
If 1: AT parser
If 2: AT parser
If 3: QMI wwan (not available in all versions)
Signed-off-by: Marco De Marco <marco.demarco@posteo.net>
Link: https://lore.kernel.org/r/49260184.kfMIbaSn9k@mars
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Yoshihiro Shimoda [Thu, 24 Jun 2021 12:20:39 +0000 (21:20 +0900)]
usb: renesas_usbhs: Fix superfluous irqs happen after usb_pkt_pop()
commit
5719df243e118fb343725e8b2afb1637e1af1373 upstream.
This driver has a potential issue which this driver is possible to
cause superfluous irqs after usb_pkt_pop() is called. So, after
the commit
3af32605289e ("usb: renesas_usbhs: fix error return
code of usbhsf_pkt_handler()") had been applied, we could observe
the following error happened when we used g_audio.
renesas_usbhs
e6590000.usb: irq_ready run_error 1 : -22
To fix the issue, disable the tx or rx interrupt in usb_pkt_pop().
Fixes:
2743e7f90dc0 ("usb: renesas_usbhs: fix the usb_pkt_pop()")
Cc: <stable@vger.kernel.org> # v4.4+
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/20210624122039.596528-1-yoshihiro.shimoda.uh@renesas.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mark Tomlinson [Fri, 25 Jun 2021 03:14:56 +0000 (15:14 +1200)]
usb: max-3421: Prevent corruption of freed memory
commit
b5fdf5c6e6bee35837e160c00ac89327bdad031b upstream.
The MAX-3421 USB driver remembers the state of the USB toggles for a
device/endpoint. To save SPI writes, this was only done when a new
device/endpoint was being used. Unfortunately, if the old device was
removed, this would cause writes to freed memory.
To fix this, a simpler scheme is used. The toggles are read from
hardware when a URB is completed, and the toggles are always written to
hardware when any URB transaction is started. This will cause a few more
SPI transactions, but no causes kernel panics.
Fixes:
2d53139f3162 ("Add support for using a MAX3421E chip as a host driver.")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Mark Tomlinson <mark.tomlinson@alliedtelesis.co.nz>
Link: https://lore.kernel.org/r/20210625031456.8632-1-mark.tomlinson@alliedtelesis.co.nz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Julian Sikorski [Tue, 20 Jul 2021 17:19:10 +0000 (19:19 +0200)]
USB: usb-storage: Add LaCie Rugged USB3-FW to IGNORE_UAS
commit
6abf2fe6b4bf6e5256b80c5817908151d2d33e9f upstream.
LaCie Rugged USB3-FW appears to be incompatible with UAS. It generates
errors like:
[ 1151.582598] sd 14:0:0:0: tag#16 uas_eh_abort_handler 0 uas-tag 1 inflight: IN
[ 1151.582602] sd 14:0:0:0: tag#16 CDB: Report supported operation codes a3 0c 01 12 00 00 00 00 02 00 00 00
[ 1151.588594] scsi host14: uas_eh_device_reset_handler start
[ 1151.710482] usb 2-4: reset SuperSpeed Gen 1 USB device number 2 using xhci_hcd
[ 1151.741398] scsi host14: uas_eh_device_reset_handler success
[ 1181.785534] scsi host14: uas_eh_device_reset_handler start
Signed-off-by: Julian Sikorski <belegdol+github@gmail.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210720171910.36497-1-belegdol+github@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mathias Nyman [Thu, 15 Jul 2021 15:01:22 +0000 (18:01 +0300)]
usb: hub: Disable USB 3 device initiated lpm if exit latency is too high
commit
1b7f56fbc7a1b66967b6114d1b5f5a257c3abae6 upstream.
The device initiated link power management U1/U2 states should not be
enabled in case the system exit latency plus one bus interval (125us) is
greater than the shortest service interval of any periodic endpoint.
This is the case for both U1 and U2 sytstem exit latencies and link states.
See USB 3.2 section 9.4.9 "Set Feature" for more details
Note, before this patch the host and device initiated U1/U2 lpm states
were both enabled with lpm. After this patch it's possible to end up with
only host inititated U1/U2 lpm in case the exit latencies won't allow
device initiated lpm.
If this case we still want to set the udev->usb3_lpm_ux_enabled flag so
that sysfs users can see the link may go to U1/U2.
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210715150122.1995966-2-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Nicholas Piggin [Tue, 20 Jul 2021 10:43:09 +0000 (20:43 +1000)]
KVM: PPC: Book3S: Fix H_RTAS rets buffer overflow
commit
f62f3c20647ebd5fb6ecb8f0b477b9281c44c10a upstream.
The kvmppc_rtas_hcall() sets the host rtas_args.rets pointer based on
the rtas_args.nargs that was provided by the guest. That guest nargs
value is not range checked, so the guest can cause the host rets pointer
to be pointed outside the args array. The individual rtas function
handlers check the nargs and nrets values to ensure they are correct,
but if they are not, the handlers store a -3 (0xfffffffd) failure
indication in rets[0] which corrupts host memory.
Fix this by testing up front whether the guest supplied nargs and nret
would exceed the array size, and fail the hcall directly without storing
a failure indication to rets[0].
Also expand on a comment about why we kill the guest and try not to
return errors directly if we have a valid rets[0] pointer.
Fixes:
8e591cb72047 ("KVM: PPC: Book3S: Add infrastructure to implement kernel-side RTAS calls")
Cc: stable@vger.kernel.org # v3.10+
Reported-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mathias Nyman [Thu, 15 Jul 2021 15:06:51 +0000 (18:06 +0300)]
xhci: Fix lost USB 2 remote wake
commit
72f68bf5c756f5ce1139b31daae2684501383ad5 upstream.
There's a small window where a USB 2 remote wake may be left unhandled
due to a race between hub thread and xhci port event interrupt handler.
When the resume event is detected in the xhci interrupt handler it kicks
the hub timer, which should move the port from resume to U0 once resume
has been signalled for long enough.
To keep the hub "thread" running we set a bus_state->resuming_ports flag.
This flag makes sure hub timer function kicks itself.
checking this flag was not properly protected by the spinlock. Flag was
copied to a local variable before lock was taken. The local variable was
then checked later with spinlock held.
If interrupt is handled right after copying the flag to the local variable
we end up stopping the hub thread before it can handle the USB 2 resume.
CPU0 CPU1
(hub thread) (xhci event handler)
xhci_hub_status_data()
status = bus_state->resuming_ports;
<Interrupt>
handle_port_status()
spin_lock()
bus_state->resuming_ports = 1
set_flag(HCD_FLAG_POLL_RH)
spin_unlock()
spin_lock()
if (!status)
clear_flag(HCD_FLAG_POLL_RH)
spin_unlock()
Fix this by taking the lock a bit earlier so that it covers
the resuming_ports flag copy in the hub thread
Cc: <stable@vger.kernel.org>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20210715150651.1996099-2-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Takashi Iwai [Fri, 16 Jul 2021 13:27:23 +0000 (15:27 +0200)]
ALSA: sb: Fix potential ABBA deadlock in CSP driver
commit
1c2b9519159b470ef24b2638f4794e86e2952ab7 upstream.
SB16 CSP driver may hit potentially a typical ABBA deadlock in two
code paths:
In snd_sb_csp_stop():
spin_lock_irqsave(&p->chip->mixer_lock, flags);
spin_lock(&p->chip->reg_lock);
In snd_sb_csp_load():
spin_lock_irqsave(&p->chip->reg_lock, flags);
spin_lock(&p->chip->mixer_lock);
Also the similar pattern is seen in snd_sb_csp_start().
Although the practical impact is very small (those states aren't
triggered in the same running state and this happens only on a real
hardware, decades old ISA sound boards -- which must be very difficult
to find nowadays), it's a real scenario and has to be fixed.
This patch addresses those deadlocks by splitting the locks in
snd_sb_csp_start() and snd_sb_csp_stop() for avoiding the nested
locks.
Reported-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/7b0fcdaf-cd4f-4728-2eae-48c151a92e10@gmail.com
Link: https://lore.kernel.org/r/20210716132723.13216-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Vasily Gorbik [Fri, 25 Jun 2021 21:50:07 +0000 (23:50 +0200)]
s390/ftrace: fix ftrace_update_ftrace_func implementation
commit
f8c2602733c953ed7a16e060640b8e96f9d94b9b upstream.
s390 enforces DYNAMIC_FTRACE if FUNCTION_TRACER is selected.
At the same time implementation of ftrace_caller is not compliant with
HAVE_DYNAMIC_FTRACE since it doesn't provide implementation of
ftrace_update_ftrace_func() and calls ftrace_trace_function() directly.
The subtle difference is that during ftrace code patching ftrace
replaces function tracer via ftrace_update_ftrace_func() and activates
it back afterwards. Unexpected direct calls to ftrace_trace_function()
during ftrace code patching leads to nullptr-dereferences when tracing
is activated for one of functions which are used during code patching.
Those function currently are:
copy_from_kernel_nofault()
copy_from_kernel_nofault_allowed()
preempt_count_sub() [with debug_defconfig]
preempt_count_add() [with debug_defconfig]
Corresponding KASAN report:
BUG: KASAN: nullptr-dereference in function_trace_call+0x316/0x3b0
Read of size 4 at addr
0000000000001e08 by task migration/0/15
CPU: 0 PID: 15 Comm: migration/0 Tainted: G B
5.13.0-41423-g08316af3644d
Hardware name: IBM 3906 M04 704 (LPAR)
Stopper: multi_cpu_stop+0x0/0x3e0 <- stop_machine_cpuslocked+0x1e4/0x218
Call Trace:
[<
0000000001f77caa>] show_stack+0x16a/0x1d0
[<
0000000001f8de42>] dump_stack+0x15a/0x1b0
[<
0000000001f81d56>] print_address_description.constprop.0+0x66/0x2e0
[<
000000000082b0ca>] kasan_report+0x152/0x1c0
[<
00000000004cfd8e>] function_trace_call+0x316/0x3b0
[<
0000000001fb7082>] ftrace_caller+0x7a/0x7e
[<
00000000006bb3e6>] copy_from_kernel_nofault_allowed+0x6/0x10
[<
00000000006bb42e>] copy_from_kernel_nofault+0x3e/0xd0
[<
000000000014605c>] ftrace_make_call+0xb4/0x1f8
[<
000000000047a1b4>] ftrace_replace_code+0x134/0x1d8
[<
000000000047a6e0>] ftrace_modify_all_code+0x120/0x1d0
[<
000000000047a7ec>] __ftrace_modify_code+0x5c/0x78
[<
000000000042395c>] multi_cpu_stop+0x224/0x3e0
[<
0000000000423212>] cpu_stopper_thread+0x33a/0x5a0
[<
0000000000243ff2>] smpboot_thread_fn+0x302/0x708
[<
00000000002329ea>] kthread+0x342/0x408
[<
00000000001066b2>] __ret_from_fork+0x92/0xf0
[<
0000000001fb57fa>] ret_from_fork+0xa/0x30
The buggy address belongs to the page:
page:(____ptrval____) refcount:1 mapcount:0 mapping:
0000000000000000 index:0x0 pfn:0x1
flags: 0x1ffff00000001000(reserved|node=0|zone=0|lastcpupid=0x1ffff)
raw:
1ffff00000001000 0000040000000048 0000040000000048 0000000000000000
raw:
0000000000000000 0000000000000000 ffffffff00000001 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
0000000000001d00: f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7
0000000000001d80: f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7
>
0000000000001e00: f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7
^
0000000000001e80: f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7
0000000000001f00: f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7
==================================================================
To fix that introduce ftrace_func callback to be called from
ftrace_caller and update it in ftrace_update_ftrace_func().
Fixes:
4cc9bed034d1 ("[S390] cleanup ftrace backend functions")
Cc: stable@vger.kernel.org
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Huang Pei [Mon, 26 Jul 2021 07:26:42 +0000 (15:26 +0800)]
Revert "MIPS: add PMD table accounting into MIPS'pmd_alloc_one"
This reverts commit
fc5705b28e51f61c5549679fe6b433dc9471cffc which is
commit
ed914d48b6a1040d1039d371b56273d422c0081e upstream.
Commit
b2b29d6d011944 (mm: account PMD tables like PTE tables) is
introduced between v5.9 and v5.10, so this fix (commit
002d8b395fa1)
should NOT apply to any pre-5.10 branch.
Signed-off-by: Huang Pei <huangpei@loongson.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Marcelo Henrique Cerri [Thu, 1 Jul 2021 01:54:38 +0000 (18:54 -0700)]
proc: Avoid mixing integer types in mem_rw()
[ Upstream commit
d238692b4b9f2c36e35af4c6e6f6da36184aeb3e ]
Use size_t when capping the count argument received by mem_rw(). Since
count is size_t, using min_t(int, ...) can lead to a negative value
that will later be passed to access_remote_vm(), which can cause
unexpected behavior.
Since we are capping the value to at maximum PAGE_SIZE, the conversion
from size_t to int when passing it to access_remote_vm() as "len"
shouldn't be a problem.
Link: https://lkml.kernel.org/r/20210512125215.3348316-1-marcelo.cerri@canonical.com
Reviewed-by: David Disseldorp <ddiss@suse.de>
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com>
Signed-off-by: Marcelo Henrique Cerri <marcelo.cerri@canonical.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Souza Cascardo <cascardo@canonical.com>
Cc: Christian Brauner <christian.brauner@ubuntu.com>
Cc: Michel Lespinasse <walken@google.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Lorenzo Stoakes <lstoakes@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Vincent Palatin [Wed, 21 Jul 2021 09:25:16 +0000 (11:25 +0200)]
Revert "USB: quirks: ignore remote wake-up on Fibocom L850-GL LTE modem"
[ Upstream commit
f3a1a937f7b240be623d989c8553a6d01465d04f ]
This reverts commit
0bd860493f81eb2a46173f6f5e44cc38331c8dbd.
While the patch was working as stated,ie preventing the L850-GL LTE modem
from crashing on some U3 wake-ups due to a race condition between the
host wake-up and the modem-side wake-up, when using the MBIM interface,
this would force disabling the USB runtime PM on the device.
The increased power consumption is significant for LTE laptops,
and given that with decently recent modem firmwares, when the modem hits
the bug, it automatically recovers (ie it drops from the bus, but
automatically re-enumerates after less than half a second, rather than being
stuck until a power cycle as it was doing with ancient firmware), for
most people, the trade-off now seems in favor of re-enabling it by
default.
For people with access to the platform code, the bug can also be worked-around
successfully by changing the USB3 LFPM polling off-time for the XHCI
controller in the BIOS code.
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
Link: https://lore.kernel.org/r/20210721092516.2775971-1-vpalatin@chromium.org
Fixes:
0bd860493f81 ("USB: quirks: ignore remote wake-up on Fibocom L850-GL LTE modem")
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dmitry Bogdanov [Fri, 2 Jul 2021 09:16:55 +0000 (12:16 +0300)]
scsi: target: Fix protect handling in WRITE SAME(32)
[ Upstream commit
6d8e7e7c932162bccd06872362751b0e1d76f5af ]
WRITE SAME(32) command handling reads WRPROTECT at the wrong offset in 1st
byte instead of 10th byte.
Link: https://lore.kernel.org/r/20210702091655.22818-1-d.bogdanov@yadro.com
Fixes:
afd73f1b60fc ("target: Perform PROTECT sanity checks for WRITE_SAME")
Signed-off-by: Dmitry Bogdanov <d.bogdanov@yadro.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Mike Christie [Thu, 1 Jul 2021 00:25:59 +0000 (19:25 -0500)]
scsi: iscsi: Fix iface sysfs attr detection
[ Upstream commit
e746f3451ec7f91dcc9fd67a631239c715850a34 ]
A ISCSI_IFACE_PARAM can have the same value as a ISCSI_NET_PARAM so when
iscsi_iface_attr_is_visible tries to figure out the type by just checking
the value, we can collide and return the wrong type. When we call into the
driver we might not match and return that we don't want attr visible in
sysfs. The patch fixes this by setting the type when we figure out what the
param is.
Link: https://lore.kernel.org/r/20210701002559.89533-1-michael.christie@oracle.com
Fixes:
3e0f65b34cc9 ("[SCSI] iscsi_transport: Additional parameters for network settings")
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Nguyen Dinh Phi [Sun, 18 Jul 2021 14:40:13 +0000 (22:40 +0800)]
netrom: Decrease sock refcount when sock timers expire
[ Upstream commit
517a16b1a88bdb6b530f48d5d153478b2552d9a8 ]
Commit
63346650c1a9 ("netrom: switch to sock timer API") switched to use
sock timer API. It replaces mod_timer() by sk_reset_timer(), and
del_timer() by sk_stop_timer().
Function sk_reset_timer() will increase the refcount of sock if it is
called on an inactive timer, hence, in case the timer expires, we need to
decrease the refcount ourselves in the handler, otherwise, the sock
refcount will be unbalanced and the sock will never be freed.
Signed-off-by: Nguyen Dinh Phi <phind.uet@gmail.com>
Reported-by: syzbot+10f1194569953b72f1ae@syzkaller.appspotmail.com
Fixes:
63346650c1a9 ("netrom: switch to sock timer API")
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yajun Deng [Wed, 14 Jul 2021 09:13:20 +0000 (17:13 +0800)]
net: decnet: Fix sleeping inside in af_decnet
[ Upstream commit
5f119ba1d5771bbf46d57cff7417dcd84d3084ba ]
The release_sock() is blocking function, it would change the state
after sleeping. use wait_woken() instead.
Fixes:
1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Yajun Deng <yajun.deng@linux.dev>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ziyang Xuan [Thu, 15 Jul 2021 12:22:04 +0000 (20:22 +0800)]
net: fix uninit-value in caif_seqpkt_sendmsg
[ Upstream commit
991e634360f2622a683b48dfe44fe6d9cb765a09 ]
When nr_segs equal to zero in iovec_from_user, the object
msg->msg_iter.iov is uninit stack memory in caif_seqpkt_sendmsg
which is defined in ___sys_sendmsg. So we cann't just judge
msg->msg_iter.iov->base directlly. We can use nr_segs to judge
msg in caif_seqpkt_sendmsg whether has data buffers.
=====================================================
BUG: KMSAN: uninit-value in caif_seqpkt_sendmsg+0x693/0xf60 net/caif/caif_socket.c:542
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x1c9/0x220 lib/dump_stack.c:118
kmsan_report+0xf7/0x1e0 mm/kmsan/kmsan_report.c:118
__msan_warning+0x58/0xa0 mm/kmsan/kmsan_instr.c:215
caif_seqpkt_sendmsg+0x693/0xf60 net/caif/caif_socket.c:542
sock_sendmsg_nosec net/socket.c:652 [inline]
sock_sendmsg net/socket.c:672 [inline]
____sys_sendmsg+0x12b6/0x1350 net/socket.c:2343
___sys_sendmsg net/socket.c:2397 [inline]
__sys_sendmmsg+0x808/0xc90 net/socket.c:2480
__compat_sys_sendmmsg net/compat.c:656 [inline]
Reported-by: syzbot+09a5d591c1f98cf5efcb@syzkaller.appspotmail.com
Link: https://syzkaller.appspot.com/bug?id=1ace85e8fc9b0d5a45c08c2656c3e91762daa9b8
Fixes:
bece7b2398d0 ("caif: Rewritten socket implementation")
Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
projects / GitHub / LineageOS / G12 / android_kernel_amlogic_linux-4.9.git / log