drivers/rtc/rtc-tegra.c: clean up probe/remove routines

Use the devres managed resource functions in the probe routine.  Also
affects the remove routine where the previously used free and release
functions are not needed.

The devm_* functions eliminate the need for manual resource releasing and
simplify error handling.  Resources allocated by devm_* are freed
automatically on driver detach.

Signed-off-by: Hannu Heikkinen <ext-hannu.m.heikkinen@nokia.com>
Acked-by: Stephen Warren <swarren@wwwdotorg.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/rtc/rtc-pl031.c: remove RTC timer interrupt handling

Remove RTT interrupt handling, since PIE mode interrupts are now better
emulated in generic code via an hrtimer we have no need for this, and
there is no codepath in the driver that enables these periodic interrupts
anyway.

Signed-off-by: Rajkumar Kasirajan <rajkumar.kasirajan@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Cc: Mattias Wallin <mattias.wallin@stericsson.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/rtc/rtc-lpc32xx.c: add device tree support

Adds device tree support for rtc-lpc32xx.c

Signed-off-by: Roland Stigge <stigge@antcom.de>
Acked-by: Rob Herring <rob.herring@calxeda.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/rtc/rtc-m41t93.c: don't let get_time() reset M41T93_FLAG_OF

If the rtc reports the time might be invalid due to oscillator failure,
M41T93_FLAG_OF flag must not be reset by get_time() as the read operation
doesn't make the time valid.

Without this patch, only the first get_time() reported an invalid time,
the second get_time() reported a valid time althought the reported time is
probably wrong due to oscillator failure.

Instead of resetting in get_time(), with this patch M41T93_FLAG_OF is
reset in set_time() when a valid time is to be written.

Signed-off-by: Nikolaus Voss <n.voss@weinmann.de>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

rtc: ds1307: add trickle charger support

Some DS13XX devices have "trickle chargers".  Its configuration register
is at different locations, the setup is the same, though.  Since the
configuration is board specific, introduce a platform_data to this driver.
Tested with a DS1339 on a custom board.

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Cc: Alessandro Zummo <alessandro.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

rtc: ds1307: remove superfluous initialization

ds1307 was kzalloced, so no need to zero members of the struct.

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Acked-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

rtc: rename CONFIG_RTC_MXC to CONFIG_RTC_DRV_MXC

In order to keep consistency with other rtc drivers,rename CONFIG_RTC_MXC
to CONFIG_RTC_DRV_MXC.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Wolfram Sang <w.sang@pengutronix.de>
Cc: Alessandro Zummo <a.zummo@towertech.it>
[akpm@linux-foundation.org: fix missed arch/arm/configs/imx_v6_v7_defconfig]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/rtc/Kconfig: place RTC_DRV_IMXDI and RTC_MXC under "on-CPU RTC drivers"

RTC_DRV_IMXDI and RTC_MXC are on-chip RTC modules, so move them under
"on-CPU RTC drivers" selection menu.

While at it change the dependency of RTC_DRV_IMXDI from ARCH_MX25 to
SOC_IMX25.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Wolfram Sang <w.sang@pengutronix.de>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/rtc/rtc-pcf8563.c: add RTC_VL_READ/RTC_VL_CLR ioctl feature

Changes are based on arch/cris/arch-v10/drivers/pcf8563.c

[akpm@linux-foundation.org: fix sparse warning]
Signed-off-by: Alexander Stein <alexander.stein@systec-electronic.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Mikael Starvik <starvik@axis.com>
Acked-by: Jesper Nilsson <jesper.nilsson@axis.com>
Cc: Wu Fengguang <wfg@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

rtc: add ioctl to get/clear battery low voltage status

Currently there is no generic way to get the RTC battery status within an
application.  So add an ioctl to read the status bit.  The idea is that
the bit is set once a low voltage is detected.  It stays there until it is
reset using the RTC_VL_CLR ioctl.

Signed-off-by: Alexander Stein <alexander.stein@systec-electronic.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/rtc/rtc-ep93xx.c: convert to use module_platform_driver()

Use module_platform_driver() to remove the boilerplate code.

Also, change the probe and remove functions to __devinit/__devexit.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

rtc/spear: add Device Tree probing capability

SPEAr platforms now support DT and so must convert all drivers support DT.
This patch adds DT probing support for rtc and updates its documentation
too.

Signed-off-by: Viresh Kumar <viresh.kumar@st.com>
Cc: Stefan Roese <sr@denx.de>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Rajeev Kumar <rajeev-dlh.kumar@st.com>
Cc: Rob Herring <robherring2@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib/vsprintf.c: "%#o",0 becomes '0' instead of '00'

number()'s behaviour is slighly changed: 0 becomes "0" instead of "00"
when using the flag SPECIAL and base 8.

Before:
Number\Format  %o    %#o  %x    %#x
            0     0   00    0   0x0
            1     1   01    1   0x1
           16    20  020   10  0x10

After:
Number\Format  %o    %#o  %x    %#x
            0     0    0    0   0x0
            1     1   01    1   0x1
           16    20  020   10  0x10

Signed-off-by: Pierre Carrier <pierre@spotify.com>
Acked-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

radix-tree: fix preload vector size

We are not preallocating a sufficient number of nodes.

Signed-off-by: Nick Piggin <npiggin@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

spinlock_debug: print kallsyms name for lock

When a spinlock warning is printed we usually get

 BUG: spinlock bad magic on CPU#0, modprobe/111
  lock: 0xdff09f38, .magic: 00000000, .owner: /0, .owner_cpu: 0

but it's nicer to print the symbol for the lock if we have it so that we
can avoid 'grep dff09f38 /proc/kallsyms' to find out which lock it was.
Use kallsyms to print the symbol name so we get something a bit easier to
read

 BUG: spinlock bad magic on CPU#0, modprobe/112
  lock: test_lock, .magic: 00000000, .owner: <none>/-1, .owner_cpu: 0

If the lock is not in kallsyms %ps will fall back to printing the address
directly.

Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

vsprintf: fix %ps on non symbols when using kallsyms

Using %ps in a printk format will sometimes fail silently and print the
empty string if the address passed in does not match a symbol that
kallsyms knows about.  But using %pS will fall back to printing the full
address if kallsyms can't find the symbol.  Make %ps act the same as %pS
by falling back to printing the address.

While we're here also make %ps print the module that a symbol comes from
so that it matches what %pS already does.  Take this simple function for
example (in a module):

static void test_printk(void)
{
int test;
pr_info("with pS: %pS\n", &test);
pr_info("with ps: %ps\n", &test);
}

Before this patch:

 with pS: 0xdff7df44
 with ps:

After this patch:

 with pS: 0xdff7df44
 with ps: 0xdff7df44

Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib/bitmap.c: fix documentation for scnprintf() functions

The code comments for bscnl_emit() and bitmap_scnlistprintf() are
describing snprintf() return semantics, but these functions use
scnprintf() return semantics.  Fix that, and document the
bitmap_scnprintf() return value as well.

Cc: Ryota Ozaki <ozaki.ryota@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib/string_helpers.c: make arrays static

Moving these arrays into static storage shrinks the kernel a bit:

   text    data     bss     dec     hex filename
    723     112      64     899     383 lib/string_helpers.o
    516     272      64     852     354 lib/string_helpers.o

Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib/test-kstrtox.c: mark const init data with __initconst instead of __initdata

As long as there is no other non-const variable marked __initdata in the
same compilation unit it doesn't hurt.  If there were one however
compilation would fail with

error: $variablename causes a section type conflict

because a section containing const variables is marked read only and so
cannot contain non-const variables.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

list_debug: WARN for adding something already in the list

We were bitten by this at one point and added an additional sanity test
for DEBUG_LIST.  You can't validly add a list_head to a list where either
prev or next is the same as the thing you're adding.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
Cc: Andi Kleen <andi@firstfloor.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

leds: add LM3533 LED driver

Add sub-driver for the LEDs on National Semiconductor / TI LM3533 lighting
power chips.

The chip provides 256 brightness levels, hardware accelerated blinking as
well as ambient-light-sensor and pwm input control.

Signed-off-by: Johan Hovold <jhovold@gmail.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Rob Landley <rob@landley.net>
Cc: Samuel Ortiz <sameo@linux.intel.com>
Cc: Jonathan Cameron <jic23@cam.ac.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: Bryan Wu <bryan.wu@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/leds/leds-pca955x.c: fix race condition while setting brightness on several LEDs

When issuing the following command:

  for I in 0 1 2 3 4 5 6 7; do
    echo 0 > /sys/class/leds/pca955x\:${I}/brightness;
  done

It is possible that all the pca955x_read_ls calls are done sequentially
before any pca955x_write_ls call is done.  This updates the LS only to
the last LED update in its set.

Fix this by using a global lock for the pca995x device during
pca955x_led_work.  Also used a struct for shared data betreen all LEDs.

[akpm@linux-foundation.org: revert unintentional rename of pca955x_ledsel()]
Signed-off-by: Alexander Stein <alexander.stein@systec-electronic.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Bryan Wu <bryan.wu@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

leds: add new transient trigger for one shot timer activation

The leds timer trigger does not currently have an interface to activate a
one shot timer.  The current support allows for setting two timers, one
for specifying how long a state to be on, and the second for how long the
state to be off.  The delay_on value specifies the time period an LED
should stay in on state, followed by a delay_off value that specifies how
long the LED should stay in off state.  The on and off cycle repeats until
the trigger gets deactivated.  There is no provision for one time
activation to implement features that require an on or off state to be
held just once and then stay in the original state forever.

Without one shot timer interface, user space can still use timer trigger
to set a timer to hold a state, however when user space application
crashes or goes away without deactivating the timer, the hardware will be
left in that state permanently.

As a specific example of this use-case, let's look at vibrate feature on
phones.  Vibrate function on phones is implemented using PWM pins on SoC
or PMIC.  There is a need to activate one shot timer to control the
vibrate feature, to prevent user space crashes leaving the phone in
vibrate mode permanently causing the battery to drain.

This trigger exports three properties, activate, state, and duration When
transient trigger is activated these properties are set to default values.

- duration allows setting timer value in msecs. The initial value is 0.
- activate allows activating and deactivating the timer specified by
  duration as needed. The initial and default value is 0.  This will allow
  duration to be set after trigger activation.
- state allows user to specify a transient state to be held for the specified
  duration.

Signed-off-by: Shuah Khan <shuahkhan@gmail.com>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: NeilBrown <neilb@suse.de>
Cc: Bryan Wu <bryan.wu@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

leds: heartbeat: stop on shutdown

A halted kernel should not show a heartbeat.

[akpm@linux-foundation.org: checkpatch fixes]
Signed-off-by: Alexander Holler <holler@ahsoftware.de>
Cc: Shuah Khan <shuahkhan@gmail.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Bryan Wu <bryan.wu@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/leds/leds-lm3530.c: simplify als configuration on initialization

For better code readability, ALS code is moved to new a function -
lm3530_als_configure()

Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Cc: Shreshtha Kumar SAHU <shreshthakumar.sahu@stericsson.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Bryan Wu <bryan.wu@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

include/linux/led-lm3530.h: comment correction about the range of brightness

max brightness is 127, so the range of brt_val should be from 0 to 127

Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Cc: Shreshtha Kumar SAHU <shreshthakumar.sahu@stericsson.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Bryan Wu <bryan.wu@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

leds: change ledtrig-timer to use activated flag

Change existing timer trigger to use the new ->activated flag to set
activate successful status in activate routine and check it in deactivate
routine to do cleanup.

Signed-off-by: Shuah Khan <shuahkhan@gmail.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Bryan Wu <bryan.wu@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

leds: change existing triggers to use activated flag

Change existing triggers backlight, gpio, and heartbeat to use the new
->activated flag to set activate successful status in their activate
routines and check it in their deactivate routines to do cleanup.

Signed-off-by: Shuah Khan <shuahkhan@gmail.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Bryan Wu <bryan.wu@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

leds: add new field to led_classdev struct to save activation state

Add a new field to led_classdev to save activattion state after activate
routine is successful.  This saved state is used in deactivate routine to
do cleanup such as removing device files, and free memory allocated during
activation.  Currently trigger_data not being null is used for this
purpose.

Existing triggers will need changes to use this new field.

Signed-off-by: Shuah Khan <shuahkhan@gmail.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Bryan Wu <bryan.wu@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

leds: Use kcalloc instead of kzalloc to allocate array

The advantage of kcalloc is that will prevent integer overflows which
could result from the multiplication of number of elements and size and it
is also a bit nicer to read.

The semantic patch that makes this change is available
in https://lkml.org/lkml/2011/11/25/107

Signed-off-by: Thomas Meyer <thomas@m3y3r.de>
Cc: Bryan Wu <bryan.wu@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

leds: simple_strtoul() cleanup

led-class.c and ledtrig-timer.c still use simple_strtoul().  Change them
to use kstrtoul() instead of obsolete simple_strtoul().

Also fix the existing int ret declaration to be ssize_t to match the
return type for _store functions in ledtrig-timer.c.

Signed-off-by: Shuah Khan <shuahkhan@gmail.com>
Cc: Joe Perches <joe@perches.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Bryan Wu <bryan.wu@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

leds: driver for DA9052/53 PMIC v2

LED Driver for Dialog Semiconductor DA9052/53 PMICs.

[akpm@linux-foundation.org: make led_reg static]
Signed-off-by: David Dajun Chen <dchen@diasemi.com>
Signed-off-by: Ashish Jangam <ashish.jangam@kpitcummins.com>
Reviewed-by: Lars-Peter Clausen <lars@metafoo.de>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Bryan Wu <bryan.wu@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/leds/leds-lp5521.c: fix lp5521_read() error handling

Gcc 4.6.2 complains that:

  drivers/leds/leds-lp5521.c: In function `lp5521_load_program':
  drivers/leds/leds-lp5521.c:214:21: warning: `mode' may be used uninitialized in this function [-Wuninitialized]
  drivers/leds/leds-lp5521.c: In function `lp5521_probe':
  drivers/leds/leds-lp5521.c:788:5: warning: `buf' may be used uninitialized in this function [-Wuninitialized]
  drivers/leds/leds-lp5521.c:740:6: warning: `ret' may be used uninitialized in this function [-Wuninitialized]

These are real problems if lp5521_read() returns an error.  When that
happens we should handle it, instead of ignoring it or doing a bitwise
OR with all the other error codes and continuing.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Milo <Milo.Kim@ti.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Bryan Wu <bryan.wu@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

backlight: tosa_lcd: use devm_ functions

The devm_ functions allocate memory that is released when a driver
detaches.  This patch uses devm_kzalloc of these functions.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Cc: Dmitry Baryshkov <dbaryshkov@gmail.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

backlight: tosa_bl: use devm_ functions

The devm_ functions allocate memory that is released when a driver
detaches.  This patch uses devm_kzalloc of these functions.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Cc: Dmitry Baryshkov <dbaryshkov@gmail.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

backlight: tdo24m: use devm_ functions

The devm_ functions allocate memory that is released when a driver
detaches.  This patch uses devm_kzalloc of these functions.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Cc: Eric Miao <eric.y.miao@gmail.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

backlight: s6e63m0: use devm_ functions

The devm_ functions allocate memory that is released when a driver
detaches.  This patch uses devm_kzalloc of these functions.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Cc: InKi Dae <inki.dae@samsung.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

backlight: ltv350qv: use devm_ functions

The devm_ functions allocate memory that is released when a driver
detaches.  This patch uses devm_kzalloc of these functions.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Cc: Haavard Skinnemoen <hskinnemoen@gmail.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

backlight: lms283gf05: use devm_ functions

The devm_ functions allocate memory that is released when a driver
detaches.  This patch uses devm_kzalloc of these functions.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Acked-by: Marek Vasut <marek.vasut@gmail.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

backlight: ld9040: use devm_ functions

The devm_ functions allocate memory that is released when a driver
detaches.  This patch uses devm_kzalloc of these functions.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Cc: Donghwa Lee <dh09.lee@samsung.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

backlight: l4f00242t03: use devm_ functions

The devm_ functions allocate memory that is released when a driver
detaches.  This patch uses devm_kzalloc of these functions.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Cc: Alberto Panizzo <alberto@amarulasolutions.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

backlight: ili9320: use devm_ functions

The devm_ functions allocate memory that is released when a driver
detaches.  This patch uses devm_kzalloc of these functions.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Cc: Ben Dooks <ben-linux@fluff.org>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

backlight: corgi_lcd: use devm_ functions

The devm_ functions allocate memory that is released when a driver
detaches.  This patch uses devm_kzalloc of these functions.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Cc: Eric Miao <eric.y.miao@gmail.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

backlight: ams369fg06: use devm_ functions

The devm_ functions allocate memory that is released when a driver
detaches.  This patch uses devm_kzalloc of these functions.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

backlight: adp8870: use devm_ functions

The devm_ functions allocate memory that is released when a driver
detaches.  This patch uses devm_kzalloc of these functions.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

backlight: adp8860: use devm_ functions

The devm_ functions allocate memory that is released when a driver
detaches.  This patch uses devm_kzalloc of these functions.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

backlight: initialize struct backlight_properties properly

In all these files, the .power field was never correctly initialized.

Signed-off-by: Corentin Chary <corentin.chary@gmail.com>
Cc: Jingoo Han <jg1.han@samsung.com>
Cc: Dave Airlie <airlied@gmail.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/video/backlight/l4f00242t03.c: use pr_fmt

This driver uses pr_debug(), so provide it with the appropriate prefixing.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Cc: Alberto Panizzo <alberto@amarulasolutions.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

backlight: progear: use pr_err() instead of printk()

Use pr_err() instead of printk() to allow dynamic debugging.  The pr_fmt
prefix for pr_ macros is used.  Also fix checkpatch warnings as below:

WARNING: printk() should include KERN_ facility level

[akpm@linux-foundation.org: use KBUILD_MODNAME, per Joe]
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Cc: Marcin Juszkiewicz <openembedded@haerwu.biz>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

backlight: omap1: use pr_info() instead of printk()

Use pr_info() instead of printk() to allow dynamic debugging.  The pr_fmt
prefix for pr_ macros is used.  Also fix checkpatch warning as below:

WARNING: Prefer pr_info(... to printk(KERN_INFO, ...

[akpm@linux-foundation.org: use KBUILD_MODNAME, per Joe]
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Cc: Andrzej Zaborowski <balrogg@gmail.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

backlight: jornada720: use pr_err()/pr_info() instead of printk()

Use pr_err()/pr_info() instead of printk() to allow dynamic debugging.
The pr_fmt prefix for pr_ macros is used.  Also fix checkpatch warnings as
below:

WARNING: Prefer pr_err(... to printk(KERN_ERR, ...
WARNING: Prefer pr_info(... to printk(KERN_INFO, ...

[akpm@linux-foundation.org: use KBUILD_MODNAME, per Joe]
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Acked-by: Kristoffer Ericson <kristoffer.ericson@gmail.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

backlight: generic_bl: use pr_info() instead of printk()

Use pr_info() instead of printk() to allow dynamic debugging.  The pr_fmt
prefix for pr_ macros is used.  Also fix checkpatch warnings as below:

WARNING: printk() should include KERN_ facility level

[akpm@linux-foundation.org: use KBUILD_MODNAME, per Joe]
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

backlight: cr_bllcd: use pr_err()/pr_info() instead of printk()

Use pr_err()/pr_info() instead of printk() to allow dynamic debugging.
The pr_fmt prefix for pr_ macros is used.  Also fix checkpatch warnings as
below:

WARNING: printk() should include KERN_ facility level
WARNING: Prefer pr_err(... to printk(KERN_ERR, ...

[akpm@linux-foundation.org: use KBUILD_MODNAME, per Joe]
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

backlight: apple_bl: use pr_debug()/pr_err() instead of printk()

Use pr_debug()/pr_err() instead of printk() to allow dynamic debugging.
The pr_fmt prefix for pr_ macros is used.  Also fix checkpatch warnings as
below:

WARNING: Prefer pr_debug(... to printk(KERN_DEBUG, ...
WARNING: Prefer pr_err(... to printk(KERN_ERR, ...

[akpm@linux-foundation.org: use KBUILD_MODNAME, per Joe]
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Cc: Matthew Garrett <mjg@redhat.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

backlight: use pr_warn() and pr_debug() instead of printk()

Use pr_warn() and pr_debug() instead of printk to allow dynamic debugging.
The pr_fmt prefix for pr_ macros is used.  Also fix checkpatch warnings
as below:

WARNING: Prefer pr_warn(... to printk(KERN_WARNING, ...

[akpm@linux-foundation.org: use KBUILD_MODNAME, per Joe]
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/video/backlight/adp5520_bl.c: use kstrtoul()

The usage of strict_strtoul() is not preferred. Thus, kstrtoul
should be used.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Cc: Michael Hennerich <michael.hennerich@analog.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/video/backlight/adp8870_bl.c: use kstrtoul()

The usage of strict_strtoul() is not preferred. Thus, kstrtoul
should be used.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Cc: Michael Hennerich <michael.hennerich@analog.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/video/backlight/adp8860_bl.c: use kstrtoul()

The usage of strict_strtoul() is not preferred.  Thus, kstrtoul should be
used.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Cc: Michael Hennerich <michael.hennerich@analog.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

backlight: add LM3533 backlight driver

Add sub-driver for the backlights on National Semiconductor / TI LM3533
lighting power chips.

The chip provides 256 brightness levels and ambient-light-sensor and pwm
input control.

[akpm@linux-foundation.org: fix warning]
[akpm@linux-foundation.org: fix the type of `mode']
Signed-off-by: Johan Hovold <jhovold@gmail.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Rob Landley <rob@landley.net>
Cc: Samuel Ortiz <sameo@linux.intel.com>
Cc: Jonathan Cameron <jic23@cam.ac.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/video/backlight/apple_bl.c: include header for exported symbol prototypes

Include the header to pickup the exported symbol prototype.

Quiets the sparse warning:

  warning: symbol 'apple_bl_register' was not declared. Should it be static?
  warning: symbol 'apple_bl_unregister' was not declared. Should it be static?

[akpm@linux-foundation.org: fix resulting build error]
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lcd: add callbacks for early fb event blank support

This patchset adds early fb blank feature that a callback of lcd panel
driver is called prior to specific fb driver's one.  In the case of
MIPI-DSI based video mode LCD Panel, for lcd power off, the power off
commands should be transferred to lcd panel with display and mipi-dsi
controller enabled because the commands is set to lcd panel at vsync porch
period.  and in opposite case, the callback of fb driver should be called
prior to lcd panel driver's one because of same issue.  Also if fb_blank
mode is changed to FB_BLANK_POWERDOWN then display controller would be
off(clock disable) but lcd panel would be still on.  at this time, you
could see some issue like sparkling on lcd panel because video clock to be
delivered to ldi module of lcd panel was disabled.  this issue could
occurs for all lcd panels.

The callback order is as the following:

at fb_blank function of fbmem.c
-> fb_notifier_call_chain(FB_EARLY_EVENT_BLANK)
       -> lcd panel driver's early_set_power()
-> info->fbops->fb_blank()
       -> spcefic fb driver's fb_blank()
-> fb_notifier_call_chain(FB_EVENT_BLANK)
       -> lcd panel driver's set_power()
   -> fb_notifier_call_chain(FB_R_EARLY_EVENT_BLANK) if
info->fops->fb_blank() was failed.

fb_notifier_call_chain(FB_R_EARLY_EVENT_BLANK) would be called to revert
the effects of previous FB_EARLY_EVENT_BLANK call.  and note that if
early_set_power() of lcd_ops is NULL then early fb blank callback would be
ignored.

This patch:

Add early_set_power and r_early_set_power callbacks.  early_set_power
callback is called prior to fb_blank() of fbmem.c and r_early_set_power
callback is called if fb_blank() was failed to revert the effects of the
early_set_power call of lcd panel driver.

Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fbdev: add events for early fb event support

Add FB_EARLY_EVENT_BLANK and FB_R_EARLY_EVENT_BLANK event mode supports.
first, fb_notifier_call_chain() is called with FB_EARLY_EVENT_BLANK and
fb_blank() of specific fb driver is called and then
fb_notifier_call_chain() is called with FB_EVENT_BLANK again at
fb_blank().  and if fb_blank() was failed then fb_nitifier_call_chain()
would be called with FB_R_EARLY_EVENT_BLANK to revert the previous
effects.

Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

blacklight: remove redundant spi driver bus initialization

In ancient times it was necessary to manually initialize the bus field of
an spi_driver to spi_bus_type.  These days this is done in
spi_driver_register() so we can drop the manual assignment.

The patch was generated using the following coccinelle semantic patch:
// <smpl>
@@
identifier _driver;
@@
struct spi_driver _driver = {
.driver = {
- .bus = &spi_bus_type,
},
};
// </smpl>

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

MAINTAINERS: remove Alessandro

I'm definitely not up to date on the subject matter any more
and haven't been able to comment on the messages on the topic.

Signed-off-by: Alessandro Rubini <rubini@ipvvis.unipv.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

hamradio/scc: orphan driver in MAINTAINERS

The email address doesn't exist anymore and the website yields a 404.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

memcg: decrement static keys at real destroy time

We call the destroy function when a cgroup starts to be removed, such as
by a rmdir event.

However, because of our reference counters, some objects are still
inflight.  Right now, we are decrementing the static_keys at destroy()
time, meaning that if we get rid of the last static_key reference, some
objects will still have charges, but the code to properly uncharge them
won't be run.

This becomes a problem specially if it is ever enabled again, because now
new charges will be added to the staled charges making keeping it pretty
much impossible.

We just need to be careful with the static branch activation: since there
is no particular preferred order of their activation, we need to make sure
that we only start using it after all call sites are active.  This is
achieved by having a per-memcg flag that is only updated after
static_key_slow_inc() returns.  At this time, we are sure all sites are
active.

This is made per-memcg, not global, for a reason: it also has the effect
of making socket accounting more consistent.  The first memcg to be
limited will trigger static_key() activation, therefore, accounting.  But
all the others will then be accounted no matter what.  After this patch,
only limited memcgs will have its sockets accounted.

[akpm@linux-foundation.org: move enum sock_flag_bits into sock.h,
                            document enum sock_flag_bits,
                            convert memcg_proto_active() and memcg_proto_activated() to test_bit(),
                            redo tcp_update_limit() comment to 80 cols]
Signed-off-by: Glauber Costa <glommer@parallels.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Li Zefan <lizefan@huawei.com>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.cz>
Acked-by: David Miller <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

memcg: always free struct memcg through schedule_work()

Right now we free struct memcg with kfree right after a rcu grace period,
but defer it if we need to use vfree() to get rid of that memory area.  We
do that by need, because we need vfree to be called in a process context.

This patch unifies this behavior, by ensuring that even kfree will happen
in a separate thread.  The goal is to have a stable place to call the
upcoming jump label destruction function outside the realm of the
complicated and quite far-reaching cgroup lock (that can't be held when
holding either the cpu_hotplug.lock or jump_label_mutex)

[akpm@linux-foundation.org: tweak comment]
Signed-off-by: Glauber Costa <glommer@parallels.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Li Zefan <lizefan@huawei.com>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Michal Hocko <mhocko@suse.cz>
Cc: David Miller <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/memcg: apply add/del_page to lruvec

Take lruvec further: pass it instead of zone to add_page_to_lru_list() and
del_page_from_lru_list(); and pagevec_lru_move_fn() pass lruvec down to
its target functions.

This cleanup eliminates a swathe of cruft in memcontrol.c, including
mem_cgroup_lru_add_list(), mem_cgroup_lru_del_list() and
mem_cgroup_lru_move_lists() - which never actually touched the lists.

In their place, mem_cgroup_page_lruvec() to decide the lruvec, previously
a side-effect of add, and mem_cgroup_update_lru_size() to maintain the
lru_size stats.

Whilst these are simplifications in their own right, the goal is to bring
the evaluation of lruvec next to the spin_locking of the lrus, in
preparation for a future patch.

Signed-off-by: Hugh Dickins <hughd@google.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: Michal Hocko <mhocko@suse.cz>
Acked-by: Konstantin Khlebnikov <khlebnikov@openvz.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: trivial cleanups in vmscan.c

Utter trivia in mm/vmscan.c, mostly just reducing the linecount slightly;
most exciting change being get_scan_count() calling vmscan_swappiness()
once instead of twice.

Signed-off-by: Hugh Dickins <hughd@google.com>
Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: Konstantin Khlebnikov <khlebnikov@openvz.org>
Reviewed-by: Michal Hocko <mhocko@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/memcg: get_lru_size not get_lruvec_size

Konstantin just introduced mem_cgroup_get_lruvec_size() and
get_lruvec_size(), I'm about to add mem_cgroup_update_lru_size(): but
we're dealing with the same thing, lru_size[lru].  We ought to agree on
the naming, and I do think lru_size is the more correct: so rename his
ones to get_lru_size().

Signed-off-by: Hugh Dickins <hughd@google.com>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: Konstantin Khlebnikov <khlebnikov@openvz.org>
Acked-by: Michal Hocko <mhocko@suse.cz>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: memcg: print statistics from live counters

Directly print statistics and event counters instead of going through an
intermediate accumulation stage into a separate array, which used to
require defining statistic items in more than one place.

[akpm@linux-foundation.org: checkpatch fixes]
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Michal Hocko <mhocko@suse.cz>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Ying Han <yinghan@google.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: memcg: group swapped-out statistics counter logically

The counter of currently swapped out pages in a memcg (hierarchy) is
sitting amidst ever-increasing event counters.  Move this item to the
other counters that reflect current state rather than history.

This technically breaks the kernel ABI, but hopefully nobody relies on the
order of items in memory.stat.

Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Michal Hocko <mhocko@suse.cz>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Ying Han <yinghan@google.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: memcg: keep ratelimit counter separate from event counters

All events except the ratelimit counter are statistics exported to
userspace.  Keep this internal value out of the event count array.

Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Michal Hocko <mhocko@suse.cz>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Ying Han <yinghan@google.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: memcg: print statistics directly to seq_file

Being able to use seq_printf() allows being smarter about statistics
name strings, which are currently listed twice, with the only difference
being a "total_" prefix on the hierarchical version.

Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Michal Hocko <mhocko@suse.cz>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Ying Han <yinghan@google.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: memcg: convert numa stat to read_seq_string interface

Instead of using the raw seq_file file interface, switch over to the
read_seq_string cftype callback and let cgroup core code set up the
seq_file.

Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Michal Hocko <mhocko@suse.cz>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Ying Han <yinghan@google.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: memcg: remove obsolete statistics array boundary enum item

MEM_CGROUP_STAT_DATA is a leftover from when item counters were living in
the same array as ever-increasing event counters.  It's no longer needed,
use MEM_CGROUP_STAT_NSTATS to iterate over the stat array.

Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Michal Hocko <mhocko@suse.cz>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Ying Han <yinghan@google.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

rescounter: remove __must_check from res_counter_charge_nofail()

Since we will succeed with the allocation no matter what, there isn't a
need to use __must_check with it.  It can very well be optional.

Signed-off-by: Glauber Costa <glommer@parallels.com>
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ying Han <yinghan@google.com>
Reviewed-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

memcg: don't uncharge in mem_cgroup_move_account()

Now, all callers pass 'false' for 'bool uncharge' so remove this argument.

Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ying Han <yinghan@google.com>
Cc: Glauber Costa <glommer@parallels.com>
Reviewed-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

memcg: move charges to root cgroup if use_hierarchy=0

Presently, at removal of cgroup, ->pre_destroy() is called and moves
charges to the parent cgroup.  A major reason for returning -EBUSY from
->pre_destroy() is that the 'moving' hits the parent's resource
limitation.  It happens only when use_hierarchy=0.

Considering use_hierarchy=0, all cgroups should be flat.  So, no one
cannot justify moving charges to parent...parent and children are in flat
configuration, not hierarchical.

This patch modifes the code to move charges to the root cgroup at
rmdir/force_empty if use_hierarchy==0.  This will much simplify rmdir()
and reduce error in ->pre_destroy.

Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ying Han <yinghan@google.com>
Cc: Glauber Costa <glommer@parallels.com>
Reviewed-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

memcg: use res_counter_uncharge_until() in move_parent()

By using res_counter_uncharge_until(), we can avoid race and unnecessary
charging.

Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ying Han <yinghan@google.com>
Cc: Glauber Costa <glommer@parallels.com>
Reviewed-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

rescounters: add res_counter_uncharge_until()

When killing a res_counter which is a child of other counter, we need to
do

res_counter_uncharge(child, xxx)
res_counter_charge(parent, xxx)

This is not atomic and wastes CPU.  This patch adds
res_counter_uncharge_until().  This function's uncharge propagates to
ancestors until specified res_counter.

res_counter_uncharge_until(child, parent, xxx)

Now the operation is atomic and efficient.

Signed-off-by: Frederic Weisbecker <fweisbec@redhat.com>
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Ying Han <yinghan@google.com>
Cc: Glauber Costa <glommer@parallels.com>
Reviewed-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/vmscan: kill struct mem_cgroup_zone

Kill struct mem_cgroup_zone and rename shrink_mem_cgroup_zone() to
shrink_lruvec(), it always shrinks one lruvec which it takes as an
argument.

Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/vmscan: push lruvec pointer into should_continue_reclaim()

Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/vmscan: push lruvec pointer into get_scan_count()

Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/vmscan: push lruvec pointer into shrink_list()

Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/vmscan: push lruvec pointer into inactive_list_is_low()

Switch mem_cgroup_inactive_anon_is_low() to lruvec pointers,
mem_cgroup_get_lruvec_size() is more effective than
mem_cgroup_zone_nr_lru_pages()

Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/vmscan: replace zone_nr_lru_pages() with get_lruvec_size()

If memory cgroup is enabled we always use lruvecs which are embedded into
struct mem_cgroup_per_zone, so we can reach lru_size counters via
container_of().

Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/vmscan: push lruvec pointer into putback_inactive_pages()

As zone_reclaim_stat is now located in the lruvec, we can reach it
directly.

Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/vmscan: remove update_isolated_counts()

update_isolated_counts() is no longer required, because lumpy-reclaim was
removed.  Insanity is over, now there is only one kind of inactive page.

Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/vmscan: push zone pointer into shrink_page_list()

It doesn't need a pointer to the cgroup - pointer to the zone is enough.
This patch also kills the "mz" argument of page_check_references() - it is
unused after "mm: memcg: count pte references from every member of the
reclaimed hierarch"

Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/vmscan: push lruvec pointer into isolate_lru_pages()

Move the mem_cgroup_zone_lruvec() call from isolate_lru_pages() into
shrink_[in]active_list().  Further patches push it to shrink_zone() step
by step.

Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: add link from struct lruvec to struct zone

This is the first stage of struct mem_cgroup_zone removal.  Further
patches replace struct mem_cgroup_zone with a pointer to struct lruvec.

If CONFIG_CGROUP_MEM_RES_CTLR=n lruvec_zone() is just container_of().

Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/vmscan: store "priority" in struct scan_control

In memory reclaim some function have too many arguments - "priority" is
one of them.  It can be stored in struct scan_control - we construct them
on the same level.  Instead of an open coded loop we set the initial
sc.priority, and do_try_to_free_pages() decreases it down to zero.

Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/memcg: use vm_swappiness from target memory cgroup

Use vm_swappiness from memory cgroup which is triggered this memory
reclaim.  This is more reasonable and allows to kill one argument.

[akpm@linux-foundation.org: fix build (patch skew)]
Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujtisu.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Glauber Costa <glommer@parallels.com>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

memcg: make threshold index in the right position

Index current_threshold may point to threshold that just equal to usage
after last call of __mem_cgroup_threshold.  But after registering a new
event, it will change (pointing to threshold just below usage).  So make
it consistent here.

For example:
now:
threshold array:  3  [5]  7  9   (usage = 6, [index] = 5)

next turn (after calling __mem_cgroup_threshold):
threshold array:  3   5  [7]  9   (usage = 7, [index] = 7)

after registering a new event (threshold = 10):
threshold array:  3  [5]  7  9  10 (usage = 7, [index] = 5)

Signed-off-by: Sha Zhengju <handai.szj@taobao.com>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Reviewed-by: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Michal Hocko <mhocko@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

memcg: remove redundant parentheses

Signed-off-by: Kirill A. Shutemov <kirill@shutemov.name>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: Michal Hocko <mhocko@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

memcg: mark stat field of mem_cgroup struct as __percpu

It fixes a lot of sparse warnings.

Signed-off-by: Kirill A. Shutemov <kirill@shutemov.name>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: Michal Hocko <mhocko@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

memcg: remove unused variable

mm/memcontrol.c: In function `mc_handle_file_pte':
mm/memcontrol.c:5206:16: warning: variable `inode' set but not used [-Wunused-but-set-variable]

Signed-off-by: Kirill A. Shutemov <kirill@shutemov.name>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: Michal Hocko <mhocko@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

memcg: mark more functions/variables as static

Based on sparse output.

Signed-off-by: Kirill A. Shutemov <kirill@shutemov.name>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: Michal Hocko <mhocko@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/memcg: kill mem_cgroup_lru_del()

This patch kills mem_cgroup_lru_del(), we can use
mem_cgroup_lru_del_list() instead.  On 0-order isolation we already have
right lru list id.

Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Glauber Costa <glommer@parallels.com>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>