[media] media/rc/imon.c: kill urb when send_packet() is interrupted

This avoids:
Apr 12 23:52:16 homeserver kernel: imon:send_packet: task interrupted
Apr 12 23:52:16 homeserver kernel: ------------[ cut here ]------------
Apr 12 23:52:16 homeserver kernel: WARNING: at drivers/usb/core/urb.c:327 usb_submit_urb+0x353/0x370()
Apr 12 23:52:16 homeserver kernel: Hardware name: Unknow
Apr 12 23:52:16 homeserver kernel: URB f64b6f00 submitted while active
Apr 12 23:52:16 homeserver kernel: Modules linked in:
Apr 12 23:52:16 homeserver kernel: Pid: 3154, comm: LCDd Not tainted 3.8.6-htpc-00005-g9e6fc5e #26
Apr 12 23:52:16 homeserver kernel: Call Trace:
Apr 12 23:52:16 homeserver kernel: [<c012d778>] ? warn_slowpath_common+0x78/0xb0
Apr 12 23:52:16 homeserver kernel: [<c04136c3>] ? usb_submit_urb+0x353/0x370
Apr 12 23:52:16 homeserver kernel: [<c04136c3>] ? usb_submit_urb+0x353/0x370
Apr 12 23:52:16 homeserver kernel: [<c0447010>] ? imon_ir_change_protocol+0x150/0x150
Apr 12 23:52:16 homeserver kernel: [<c012d843>] ? warn_slowpath_fmt+0x33/0x40
Apr 12 23:52:16 homeserver kernel: [<c04136c3>] ? usb_submit_urb+0x353/0x370
Apr 12 23:52:16 homeserver kernel: [<c0446c67>] ? send_packet+0x97/0x270
Apr 12 23:52:16 homeserver kernel: [<c0446cfe>] ? send_packet+0x12e/0x270
Apr 12 23:52:16 homeserver kernel: [<c05c5743>] ? do_nanosleep+0xa3/0xd0
Apr 12 23:52:16 homeserver kernel: [<c044760e>] ? vfd_write+0xae/0x250
Apr 12 23:52:16 homeserver kernel: [<c0447560>] ? lcd_write+0x180/0x180
Apr 12 23:52:16 homeserver kernel: [<c01b2b19>] ? vfs_write+0x89/0x140
Apr 12 23:52:16 homeserver kernel: [<c01b2dda>] ? sys_write+0x4a/0x90
Apr 12 23:52:16 homeserver kernel: [<c05c7c45>] ? sysenter_do_call+0x12/0x26
Apr 12 23:52:16 homeserver kernel: ---[ end trace a0b6f0fcfd2f9a1d ]---
Apr 12 23:52:16 homeserver kernel: imon:send_packet: error submitting urb(-16)
Apr 12 23:52:16 homeserver kernel: imon:vfd_write: send packet #3 failed
Apr 12 23:52:16 homeserver kernel: imon:send_packet: error submitting urb(-16)
Apr 12 23:52:16 homeserver kernel: imon:vfd_write: send packet #0 failed

Signed-off-by: Kevin Baradon <kevin.baradon@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] media/rc/imon.c: do not try to register 2nd intf if 1st intf failed

This bug could be triggered if 1st interface configuration fails:
Apr  8 18:20:30 homeserver kernel: usb 5-1: new low-speed USB device number 2 using ohci_hcd
Apr  8 18:20:30 homeserver kernel: input: iMON Panel, Knob and Mouse(15c2:0036) as /devices/pci0000:00/0000:00:13.0/usb5/5-1/5-1:1.0/input/input2
Apr  8 18:20:30 homeserver kernel: Registered IR keymap rc-imon-pad
Apr  8 18:20:30 homeserver kernel: input: iMON Remote (15c2:0036) as /devices/pci0000:00/0000:00:13.0/usb5/5-1/5-1:1.0/rc/rc0/input3
Apr  8 18:20:30 homeserver kernel: rc0: iMON Remote (15c2:0036) as /devices/pci0000:00/0000:00:13.0/usb5/5-1/5-1:1.0/rc/rc0
Apr  8 18:20:30 homeserver kernel: imon:send_packet: packet tx failed (-32)
Apr  8 18:20:30 homeserver kernel: imon 5-1:1.0: remote input dev register failed
Apr  8 18:20:30 homeserver kernel: imon 5-1:1.0: imon_init_intf0: rc device setup failed
Apr  8 18:20:30 homeserver kernel: imon 5-1:1.0: unable to initialize intf0, err 0
Apr  8 18:20:30 homeserver kernel: imon:imon_probe: failed to initialize context!
Apr  8 18:20:30 homeserver kernel: imon 5-1:1.0: unable to register, err -19
Apr  8 18:20:30 homeserver kernel: BUG: unable to handle kernel NULL pointer dereference at 00000014
Apr  8 18:20:30 homeserver kernel: IP: [<c05c4e4c>] mutex_lock+0xc/0x30
Apr  8 18:20:30 homeserver kernel: *pde = 00000000
Apr  8 18:20:30 homeserver kernel: Oops: 0002 [#1] PREEMPT SMP
Apr  8 18:20:30 homeserver kernel: Modules linked in:
Apr  8 18:20:30 homeserver kernel: Pid: 367, comm: khubd Not tainted 3.8.3-htpc-00002-g79b1403 #23 Unknow Unknow/RS780-SB700
Apr  8 18:20:30 homeserver kernel: EIP: 0060:[<c05c4e4c>] EFLAGS: 00010296 CPU: 1
Apr  8 18:20:30 homeserver kernel: EIP is at mutex_lock+0xc/0x30
Apr  8 18:20:30 homeserver kernel: EAX: 00000014 EBX: 00000014 ECX: 00000000 EDX: f590e480
Apr  8 18:20:30 homeserver kernel: ESI: f5deac00 EDI: f590e480 EBP: f5f3ee00 ESP: f6577c28
Apr  8 18:20:30 homeserver kernel: DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068
Apr  8 18:20:30 homeserver kernel: CR0: 8005003b CR2: 00000014 CR3: 0081b000 CR4: 000007d0
Apr  8 18:20:30 homeserver kernel: DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000
Apr  8 18:20:30 homeserver kernel: DR6: ffff0ff0 DR7: 00000400
Apr  8 18:20:30 homeserver kernel: Process khubd (pid: 367, ti=f6576000 task=f649ea00 task.ti=f6576000)
Apr  8 18:20:30 homeserver kernel: Stack:
Apr  8 18:20:30 homeserver kernel: 00000000 f5deac00 c0448de4 f59714c0 f5deac64 c03b8ad2 f6577c90 00000004
Apr  8 18:20:30 homeserver kernel: f649ea00 c0205142 f6779820 a1ff7f08 f5deac00 00000001 f5f3ee1c 00000014
Apr  8 18:20:30 homeserver kernel: 00000004 00000202 15c20036 c07a03e8 fffee0ca f6795c00 f5f3ee1c f5deac00
Apr  8 18:20:30 homeserver kernel: Call Trace:
Apr  8 18:20:30 homeserver kernel: [<c0448de4>] ? imon_probe+0x494/0xde0
Apr  8 18:20:30 homeserver kernel: [<c03b8ad2>] ? rpm_resume+0xb2/0x4f0
Apr  8 18:20:30 homeserver kernel: [<c0205142>] ? sysfs_addrm_finish+0x12/0x90
Apr  8 18:20:30 homeserver kernel: [<c04170e9>] ? usb_probe_interface+0x169/0x240
Apr  8 18:20:30 homeserver kernel: [<c03b0ca0>] ? __driver_attach+0x80/0x80
Apr  8 18:20:30 homeserver kernel: [<c03b0ca0>] ? __driver_attach+0x80/0x80
Apr  8 18:20:30 homeserver kernel: [<c03b0a94>] ? driver_probe_device+0x54/0x1e0
Apr  8 18:20:30 homeserver kernel: [<c0416abe>] ? usb_device_match+0x4e/0x80
Apr  8 18:20:30 homeserver kernel: [<c03af314>] ? bus_for_each_drv+0x34/0x70
Apr  8 18:20:30 homeserver kernel: [<c03b0a0b>] ? device_attach+0x7b/0x90
Apr  8 18:20:30 homeserver kernel: [<c03b0ca0>] ? __driver_attach+0x80/0x80
Apr  8 18:20:30 homeserver kernel: [<c03b00ff>] ? bus_probe_device+0x5f/0x80
Apr  8 18:20:30 homeserver kernel: [<c03aeab7>] ? device_add+0x567/0x610
Apr  8 18:20:30 homeserver kernel: [<c041a7bc>] ? usb_create_ep_devs+0x7c/0xd0
Apr  8 18:20:30 homeserver kernel: [<c0413837>] ? create_intf_ep_devs+0x47/0x70
Apr  8 18:20:30 homeserver kernel: [<c04156c4>] ? usb_set_configuration+0x454/0x750
Apr  8 18:20:30 homeserver kernel: [<c03b0ca0>] ? __driver_attach+0x80/0x80
Apr  8 18:20:30 homeserver kernel: [<c041de8a>] ? generic_probe+0x2a/0x80
Apr  8 18:20:30 homeserver kernel: [<c03b0ca0>] ? __driver_attach+0x80/0x80
Apr  8 18:20:30 homeserver kernel: [<c0205aff>] ? sysfs_create_link+0xf/0x20
Apr  8 18:20:30 homeserver kernel: [<c04171db>] ? usb_probe_device+0x1b/0x40
Apr  8 18:20:30 homeserver kernel: [<c03b0a94>] ? driver_probe_device+0x54/0x1e0
Apr  8 18:20:30 homeserver kernel: [<c03af314>] ? bus_for_each_drv+0x34/0x70
Apr  8 18:20:30 homeserver kernel: [<c03b0a0b>] ? device_attach+0x7b/0x90
Apr  8 18:20:30 homeserver kernel: [<c03b0ca0>] ? __driver_attach+0x80/0x80
Apr  8 18:20:30 homeserver kernel: [<c03b00ff>] ? bus_probe_device+0x5f/0x80
Apr  8 18:20:30 homeserver kernel: [<c03aeab7>] ? device_add+0x567/0x610
Apr  8 18:20:30 homeserver kernel: [<c040e6df>] ? usb_new_device+0x12f/0x1e0
Apr  8 18:20:30 homeserver kernel: [<c040f4d8>] ? hub_thread+0x458/0x1230
Apr  8 18:20:30 homeserver kernel: [<c015554f>] ? dequeue_task_fair+0x9f/0xc0
Apr  8 18:20:30 homeserver kernel: [<c0131312>] ? release_task+0x1d2/0x330
Apr  8 18:20:30 homeserver kernel: [<c01477b0>] ? abort_exclusive_wait+0x90/0x90
Apr  8 18:20:30 homeserver kernel: [<c040f080>] ? usb_remote_wakeup+0x40/0x40
Apr  8 18:20:30 homeserver kernel: [<c0146ed2>] ? kthread+0x92/0xa0
Apr  8 18:20:30 homeserver kernel: [<c05c7877>] ? ret_from_kernel_thread+0x1b/0x28
Apr  8 18:20:30 homeserver kernel: [<c0146e40>] ? kthread_freezable_should_stop+0x50/0x50
Apr  8 18:20:30 homeserver kernel: Code: 89 04 24 89 f0 e8 05 ff ff ff 8b 5c 24 24 8b 74 24 28 8b 7c 24 2c 8b 6c 24 30 83 c4 34 c3 00 83 ec 08 89 1c 24 89 74 24 04 89 c3 <f0> ff 08 79 05 e8 ca 03 00 00 64 a1 70 d6 80 c0 8b 74 24 04 89
Apr  8 18:20:30 homeserver kernel: EIP: [<c05c4e4c>] mutex_lock+0xc/0x30 SS:ESP 0068:f6577c28
Apr  8 18:20:30 homeserver kernel: CR2: 0000000000000014
Apr  8 18:20:30 homeserver kernel: ---[ end trace df134132c967205c ]---

Signed-off-by: Kevin Baradon <kevin.baradon@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] imon: Use large delays earlier

send_packet() is used during initialization, before send_packet_delay
is set. So, move ictx->send_packet_delay to happen earlier.

[mchehab@redhat.com: fold two patches into one to make git history clearer]
Signed-off-by: Kevin Baradon <kevin.baradon@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] media: info leak in media_device_enum_entities()

The last part of the "u_ent.name" buffer isn't cleared so it still has
uninitialized stack memory.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] dib7090p: improve the support of the dib7090 and dib7790

The intend of this patch is to improve the support of the dib7090 and
dib7790. The AGC1 min value is set to 32768 by default. The actual AGC1 min
and the external attenuation are controled depending on the received RF
level.

Signed-off-by: Olivier Grenie <olivier.grenie@parrot.com>
Signed-off-by: Patrick Boettcher <patrick.boettcher@parrot.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] dib7090p: remove the support for the dib7090E

The intend of this patch is to remove the support for the dib7090E. The
DiB7090E-package has never left prototype state and never made it to
mass-prod-state.

Signed-off-by: Olivier Grenie <olivier.grenie@parrot.com>
Signed-off-by: Patrick Boettcher <patrick.boettcher@parrot.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] dib8096: enhancement

The intend of this patch is to improve the support of the dib8096. The PLL
parameters are not automatically computed. The limit to set/unset external
diode for attenuation has been updated. The TFE8096P board is using the
new I2C API.

Signed-off-by: Olivier Grenie <olivier.grenie@parrot.com>
Signed-off-by: Patrick Boettcher <patrick.boettcher@parrot.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] dib0090: enhancement

The intend of this patch is to improve the support of the dib0090 tuner.
The ramp tables have been updated. Also some minor enhancements has been
added (EFUSE and reset).

Signed-off-by: Olivier Grenie <olivier.grenie@parrot.com>
Signed-off-by: Patrick Boettcher <patrick.boettcher@parrot.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] dib7000p: enhancement

The intend of this patch is to improve the support of the dib7000p. It is
now possible to set the minimum value for the AGC1. Also, the driver takes
into account the frequency offset introduced in the tuned frequency.

Signed-off-by: Olivier Grenie <olivier.grenie@parrot.com>
Signed-off-by: Patrick Boettcher <patrick.boettcher@parrot.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] dib8000: enhancement

The intend of this patch is to improve the support of the dib8000.

Signed-off-by: Olivier Grenie <olivier.grenie@parrot.com>
Signed-off-by: Patrick Boettcher <patrick.boettcher@parrot.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] em28xx: add a missing le16_to_cpu conversion

commit 61ff5d69 "em28xx: improve em2710/em2820 distinction" missed the
le16_to_cpu conversion of the USB vendor ID.

Signed-off-by: Frank Schäfer <fschaefer.oss@googlemail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] solo6x10: Fix pixelformat accepted/reported by the encoder

The 6010 produces MPEG-4 part 2, while 6110 produces H.264.

Signed-off-by: Ismael Luceno <ismael.luceno@corp.bluecherry.net>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] go7007: dubious one-bit signed bitfields

Because they're signed, "is_video" and "is_audio" can be 0 and -1
instead of 0 and 1 as intended.  It doesn't cause a bug, but it makes
Sparse complain:
drivers/staging/media/go7007/go7007-priv.h:94:31: error: dubious one-bit signed bitfield
drivers/staging/media/go7007/go7007-priv.h:95:31: error: dubious one-bit signed bitfield

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] cx88: Fix unsafe locking in suspend-resume

Legacy PCI suspend-resume handlers are called with interrupts enabled.

But cx8800_suspend/cx8800_resume and
cx8802_suspend_common/cx8802_resume_common use spin_lock/spin_unlock
functions to acquire dev->slock, while the same lock is acquired in the
corresponding irq-handlers: cx8800_irq and cx8802_irq.

That means a deadlock is possible if an interrupt happens while suspend
or resume owns the lock. The patch replaces spin_lock/spin_unlock with
spin_lock_irqsave/spin_unlock_irqrestore.

Found by Linux Driver Verification project (linuxtesting.org).

[mchehab@redhat.com: Fix CodingStyle]
Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] solo6x10: Update the encoder mode on VIDIOC_S_FMT

Signed-off-by: Ismael Luceno <ismael.luceno@corp.bluecherry.net>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] lg2160: dubious one-bit signed bitfield

Sparse complains that these are "dubious one-bit signed bitfields" and
the comment says it was intended to be 1 and 0 instead of -1 and 0.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] DT: export of_get_next_parent() for use by modules: fix modular V4L2

Currently modular V4L2 build with enabled OF is broken dur to the
of_get_next_parent() function being unavailable to modules. Export it to
fix the build.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Acked-by: Grant Likely <grant.likely@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

Revert "[media] mfd: Add header files and Kbuild plumbing for SI476x MFD core"

As requested by Samuel Ortiz <sameo@linux.intel.com>, revert
this patch.

This reverts commit 3f8ec5df11aa2ad7402cfb3368532a96b63426a4.

Conflicts:
drivers/mfd/Kconfig

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

Revert "[media] v4l2: Add a V4L2 driver for SI476X MFD"

As requested by Andrey Smirnov <andrew.smirnov@gmail.com>, revert
this patch.

This reverts commit 30bac9110455402fa8888740c6819dd3daa2666f.

Conflicts:
drivers/media/radio/Kconfig
drivers/media/radio/radio-si476x.c

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] sta2x11_vip: Fix compilation if I2C is not set

From Fengguang Wu <fengguang.wu@intel.com>:

> drivers/media/pci/sta2x11/sta2x11_vip.c: In function 'sta2x11_vip_init_one':
> drivers/media/pci/sta2x11/sta2x11_vip.c:1314:2: error: implicit declaration of function 'i2c_get_adapter' [-Werror=implicit-function-declaration]
> drivers/media/pci/sta2x11/sta2x11_vip.c:1314:15: warning: assignment makes pointer from integer without a cast [enabled by default]
> drivers/media/pci/sta2x11/sta2x11_vip.c:1330:2: error: implicit declaration of function 'i2c_put_adapter' [-Werror=implicit-function-declaration]

And also:

> warning: (STA2X11_VIP) selects VIDEO_ADV7180 which has unmet direct dependencies (MEDIA_SUPPORT && VIDEO_V4L2 && I2C)
> drivers/media/i2c/adv7180.c: In function '__adv7180_status':
> drivers/media/i2c/adv7180.c:194:2: error: implicit declaration of function 'i2c_smbus_read_byte_data' [-Werror=implicit-function-declaration]
> drivers/media/i2c/adv7180.c: In function 'adv7180_s_routing':
> drivers/media/i2c/adv7180.c:251:2: error: implicit declaration of function 'i2c_smbus_write_byte_data' [-Werror=implicit-function-declaration]
> drivers/media/i2c/adv7180.c: In function 'adv7180_probe':
> drivers/media/i2c/adv7180.c:551:2: error: implicit declaration of function 'i2c_check_functionality' [-Werror=implicit-function-declaration]
> drivers/media/i2c/adv7180.c:554:2: error: implicit declaration of function 'i2c_adapter_id' [-Werror=implicit-function-declaration]
> drivers/media/i2c/adv7180.c: At top level:
> drivers/media/i2c/adv7180.c:663:1: warning: data definition has no type or storage class [enabled by default]
> drivers/media/i2c/adv7180.c:663:1: warning: type defaults to 'int' in declaration of 'module_i2c_driver' [-Wimplicit-int]
> drivers/media/i2c/adv7180.c:663:1: warning: parameter names (without types) in function declaration [enabled by default]
> drivers/media/i2c/adv7180.c:649:26: warning: 'adv7180_driver' defined but not used [-Wunused-variable]

This is due to the lack of I2C support:

...
> CONFIG_I2C is not set
...

So, Make sure that sta2x11_vip depends on I2C.

Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] it913x: rename its tuner driver to tuner_it913x

There are three drivers with *it913x name on it, and they all
belong to the same device:
a tuner, at it913x.c;
a frontend: it913x-fe.c;
a bridge: it913x.c, renamed to dvb_usb_it913x by the
building system.

This is confusing. Even more confusing are the two .c files with
the same name under different directories, with different contents
and different functions. So, prepend the tuner one.

This also breaks the out-of-tree compilation system.

Reported-by: Frederic Fays <frederic.fays@gmail.com>
Acked-by: Antti Palosaari <crope@iki.fi>
Reviewed-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] mceusb: add some missing cmd sizes

Fix mceusb_cmdsize() which returns incorrect datasize=0 for
sub-commands MCE_RSP_GETPORTSTATUS, MCE_RSP_GETWAKESOURCE,
MCE_RSP_EQDEVDETAILS, MCE_RSP_EQEMVER, and MCE_RSP_EQIRNUMPORTS.

While here, change mceusb_cmdsize() name to reflect that it returns
data size not cmd size.

Signed-off-by: William Steidtmann <billstei@hbci.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] zoran: Don't print proc_dir_entry data in debug [RFC]

Don't print proc_dir_entry data in debug as we're soon to have no direct
access to the contents of the PDE.  Print what was put in there instead.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] staging/media: fix go7007 dependencies and build

VIDEO_GO7007 uses usb interfaces so it should depend on USB.
It also selects CYPRESS_FIRMWARE, which depends on USB.
Fixes build errors and a kconfig warning:
go7007-loader.c:(.text+0xcc7d0): undefined reference to `usb_get_dev'
go7007-loader.c:(.init.text+0x49f0): undefined reference to `usb_register_driver'
go7007-loader.c:(.exit.text+0x17ce): undefined reference to `usb_deregister'
warning: (DVB_USB_AZ6007 && VIDEO_GO7007) selects CYPRESS_FIRMWARE which has unmet direct dependencies (MEDIA_SUPPORT && USB)

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] em28xx: Put remaining .vidioc_g_chip_info instance under ADV_DEBUG

Commit cd634f1 ("[media] v4l2: put VIDIOC_DBG_G_CHIP_NAME under
ADV_DEBUG") missed the initializer of radio_ioctl_ops:
drivers/media/usb/em28xx/em28xx-video.c:1830:2: error: unknown field 'vidioc_g_chip_info' specified in initializer
drivers/media/usb/em28xx/em28xx-video.c:1830:26: error: 'vidioc_g_chip_info' undeclared here (not in a function)

Signed-off-by: Michal Marek <mmarek@suse.cz>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] cxd2820r_t2: Fix a warning: stream_id is unsigned

drivers/media/dvb-frontends/cxd2820r_t2.c: In function 'cxd2820r_set_frontend_t2':
drivers/media/dvb-frontends/cxd2820r_t2.c:128:2: warning: comparison of unsigned expression < 0 is always false [-Wtype-limits]

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] MAINTAINERS: change entry for davinci media driver

As of now TI has no maintainer/supporter for davinci media
drivers, Until it has any I'll be maintaining it.

Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] rc: fix single line indentation of keymaps/Makefile

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] em28xx: map remote for 1b80:e425

Map RC_MAP_REDDO to that device.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] rc: add rc-reddo

It is very similar than rc-msi-digivox-iii but new keytable is needed
as there is one existing scancode mapped to different button. Also that
one has less buttons.
NEC extended protocol with address 0x61d6.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] media: vb2: add length check for mmap

The length of mmap() can be bigger than length of vb2 buffer, so
it should be checked.

Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] MAINTAINERS: add RTL2832 media driver

Driver author has disappeared, even mails are bouncing back.
I will keep care with that as I have done for a while.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] MAINTAINERS: add DVB_USB_GL861

I have the hardware and I have already made almost all changes what
are needed during the recent few years, so lets mark it as maintained.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] rc: ene_ir: fix potential double free in ene_probe()

Since rc_unregister_device() frees its argument, the subsequently
call to rc_free_device() on the same variable will cause a double
free bug. Fix by set argument to NULL, thus when fall through to
rc_free_device(), nothing will be done there.

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] rc: nuvoton-cir: fix potential double free in nvt_probe()

Since rc_unregister_device() frees its argument, the subsequently
call to rc_free_device() on the same variable will cause a double
free bug. Fix by set argument to NULL, thus when fall through to
rc_free_device(), nothing will be done there.

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] rc: ite-cir: fix potential double free in ite_probe()

Since rc_unregister_device() frees its argument, the subsequently
call to rc_free_device() on the same variable will cause a double
free bug. Fix by set argument to NULL, thus when fall through to
rc_free_device(), nothing will be done there.

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] rc: winbond-cir: fix potential double free in wbcir_probe()

Since rc_unregister_device() frees its argument, the subsequently
call to rc_free_device() on the same variable will cause a double
free bug. Fix by set argument to NULL, thus when fall through to
rc_free_device(), nothing will be done there.

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] MAINTAINERS: Mark the SH VOU driver as Odd Fixes

The driver isn't actively maintained anymore, update its status.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] soc-camera: fix typos in the default format-conversion table

The default format conversion table mbus_fmt[] in soc_mediabus.c lists
"natural" conversions between media-bus and fourcc pixel formats, that are
achieved by storing data from the bus in RAM exactly as it arrives, only
possibly padding missing high or low bits. Such data acquisition mode
cannot change data endianness, therefore two locations with opposite
endianness are erroneous. This change might affest the omap1-camera driver,
existing configurations should be verified.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] ARM: daVinci: dm644x/dm355/dm365: replace V4L2_STD_525_60/625_50 with V4L2_STD_NTSC/PAL

This patch replaces V4L2_STD_525_60/625_50 with V4L2_STD_NTSC/PAL
respectively as this are the proper video standards.

Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Reported-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] ARM: davinci: dm355 EVM: add support for VPBE display

add support for V4L2 video display to DM355 EVM.
Support for SD modes is provided, along with Composite
output

Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Acked-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] ARM: davinci: dm355: add support for v4l2 video display

Create platform devices for various video modules like venc,osd,
vpbe and v4l2 driver for dm355.

Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Acked-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] ARM: davinci: dm365 EVM: add support for VPBE display

add support for V4L2 video display to DM365 EVM.
Support for SD and ED modes is provided, along with Composite
and Component outputs.

Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Acked-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] ARM: davinci: dm365: add support for v4l2 video display

Create platform devices for various video modules like venc,osd,
vpbe and v4l2 driver for dm365.

Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Acked-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] davinic: vpss: trivial cleanup

this patch removes unnecessary header file inclusions and
fixes the typo's.

Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] media: davinci: vpbe: venc: move the enabling of vpss clocks to driver

The vpss clocks were enabled by calling a exported function from a driver
in a machine code. calling driver code from platform code is incorrect way.
This patch fixes this issue and calls the function from driver code itself.

Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] media: davinci: vpss: enable vpss clocks

By default the VPSS clocks were enabled in capture driver
for davinci family which creates duplicates for dm355/dm365/dm644x.
This patch adds support to enable the VPSS clocks in VPSS driver,
which avoids duplication of code and also adding clock aliases.
This patch uses PM runtime API to enable/disable clock, instead
of DaVinci clock framework. con_ids for master and slave clocks of
vpss is added in pm_domain.
This patch cleanups the VPSS clock enabling in the capture driver,
and also removes the clock alias in machine file. Along side adds
a vpss slave clock for DM365 as mentioned by Sekhar
(https://patchwork.kernel.org/patch/1221261/).
The Suspend/Resume in dm644x_ccdc.c which enabled/disabled the VPSS clock
is now implemented as part of the VPSS driver.

Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Acked-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] davinci: vpif: add pm_runtime support

Add pm_runtime support to the TI Davinci VPIF driver.

Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] media: davinci: kconfig: fix incorrect selects

drivers/media/platform/davinci/Kconfig uses selects where
it should be using 'depends on'. This results in warnings of
the following sort when doing randconfig builds.
warning: (VIDEO_DM6446_CCDC && VIDEO_DM355_CCDC && VIDEO_ISIF && VIDEO_DAVINCI_VPBE_DISPLAY) selects VIDEO_VPSS_SYSTEM which has unmet direct dependencies (MEDIA_SUPPORT && V4L_PLATFORM_DRIVERS && ARCH_DAVINCI)
The VPIF kconfigs had a strange 'select' and 'depends on' cross
linkage which have been fixed as well by removing unneeded
VIDEO_DAVINCI_VPIF config symbol.
Similarly, remove the unnecessary VIDEO_VPSS_SYSTEM and
VIDEO_VPFE_CAPTURE. They don't select any independent functionality
and were being used to manage code dependencies which can
be handled using makefile.
Selecting video modules is now dependent on all ARCH_DAVINCI
instead of specific EVMs and SoCs earlier. This should help build
coverage. Remove unnecessary 'default y' for some config symbols.
While at it, fix the Kconfig help text to make it more readable
and fix names of modules created during module build.
Rename VIDEO_ISIF to VIDEO_DM365_ISIF as per suggestion from
Prabhakar.
This patch has only been build tested; I have tried to not break
any existing assumptions. I do not have the setup to test video,
so any test reports welcome.

Reported-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
[prabhakar.csengg@gmail.com: Fixed typo]
Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] adv7180: fix querystd() method for no input signal

When the input signal is not detected querystd() method should return
V4L2_STD_UNKNOWN instead of previously latched analog video standard.

Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] em28xx: improve em2710/em2820 distinction

Chip id 18 is used by the em2710 and em2820.
The current code assumes that if the device is a camera, the chip is an em2710
and an em2820 otherwise.
But it turned out that the em2820 is also used in camera devices.
"Silvercrest 1.3 MPix" webcams for example are available with both chips.
Fortunately both variants are using different generic USD IDs which give us a
hint about the used chip.

Signed-off-by: Frank Schäfer <fschaefer.oss@googlemail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] em28xx: fix snapshot button support

The snapshot button support is currently broken, because module em28xx-rc is
loaded only if the device has remote control support.
Fix it by also loading this module if the device has a snapshot button.

Signed-off-by: Frank Schäfer <fschaefer.oss@googlemail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] media: Fix randconfig error

Fix randconfig error when USB is not enabled:
ERROR: "usb_control_msg" [drivers/media/common/cypress_firmware.ko] undefined!

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] MAINTAINERS: update CYPRESS_FIRMWARE media driver

It is moved to the different location and renamed.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] dt3155v4l: fix timestamp handling

Use the monotonic clock and set the timestamp_type that vb2 expects.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] dt3155v4l: fix incorrect mutex locking

A mutex_unlock was missing in the 'success' path of the open() call,
and also at one error path in the same function.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] MAINTAINERS: add hdpvr entry

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] hdpvr: allow g/s/enum/querystd when in legacy mode

Both MythTV and gstreamer expect that they can set/get/query/enumerate the
standards, even if the input is the component input for which standards
really do not apply.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] hdpvr: add dv_timings support

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] hdpvr: add g/querystd, remove deprecated current_norm

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] hdpvr: recognize firmware version 0x1e

This is the latest firmware version and - it seems - the most reliable.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] hdpvr: register the video node at the end of probe

Video nodes can be used at once after registration, so make sure the full
initialization is done before registering them.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] hdpvr: small fixes

- return EBUSY instead of EAGAIN.
- add missing break.
- remove unnecessary buf type check (done by the core).

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] hdpvr: support device_caps in querycap

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] hdpvr: add prio and control event support

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] hdpvr: remove hdpvr_fh and just use v4l2_fh

This prepares the driver for priority and control event handling.
This patch also checks for correct streaming ownership and it makes a
small improvement to the encoder_cmd ioctls: always zero 'flags' and
drop the memset of 'raw' as that is already done by the v4l2 core.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] hdpvr: convert to the control framework

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] v4l2-dv-timings.h: add 480i59.94 and 576i50 CEA-861-E timings

These formats are supported by the HDPVR, but they were missing in the list.
Note that these formats are different from the common PAL/NTSC/SECAM formats
since all color channels are transmitted separately and so there is no PAL
or NTSC or SECAM color encoding involved.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] videodev2.h: fix incorrect V4L2_DV_FL_HALF_LINE bitmask

This was set to 1 << 0 which is the same as V4L2_DV_FL_REDUCED_BLANKING.
It should be 1 << 3 instead. Luckily interlaced formats are rarely used,
which is why this bug wasn't seen until now.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] radio-si4713: add prio checking and control events

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Eduardo Valentin <edubezval@gmail.com>
Tested-by: Eduardo Valentin <edubezval@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] radio-si4713: convert to the control framework

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Eduardo Valentin <edubezval@gmail.com>
Tested-by: Eduardo Valentin <edubezval@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] radio-si4713: fix g/s_frequency

- check for invalid modulators.
- clamp frequency to valid range.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Eduardo Valentin <edubezval@gmail.com>
Tested-by: Eduardo Valentin <edubezval@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] radio-si4713: use V4L2 core lock

Simplify locking by using the V4L2 core lock mechanism. This allows us to
remove all locking from the i2c module. This will also simplify the upcoming
conversion to the control framework.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Eduardo Valentin <edubezval@gmail.com>
Tested-by: Eduardo Valentin <edubezval@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] radio-si4713: improve querycap

Set bus_info and fill in device_caps.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Eduardo Valentin <edubezval@gmail.com>
Tested-by: Eduardo Valentin <edubezval@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] radio-si4713: embed struct video_device instead of allocating it

Also set the v4l2_dev pointer in struct video_device as this was missing.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Eduardo Valentin <edubezval@gmail.com>
Tested-by: Eduardo Valentin <edubezval@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] radio-si4713: remove audout ioctls

The audout ioctls are not appropriate for radio transmitters, they apply to
video output devices only. Remove them from this driver.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Eduardo Valentin <edubezval@gmail.com>
Tested-by: Eduardo Valentin <edubezval@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] em28xx: fix kernel oops when watching digital TV

dvb->adapter.priv should also be set to the i2c bus since that's what
em28xx_tuner_callback expects.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Tested-by: Frank Schäfer <fschaefer.oss@googlemail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] videodev2.h: increase size of 'reserved' array

Increase the size of the 'reserved' array to give more room for future
extensions.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] v4l2: rename VIDIOC_DBG_G_CHIP_NAME to _CHIP_INFO

This ioctl will be extended to return more information than just the name.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] v4l2-ioctl: fill in name before calling vidioc_g_chip_name

That way drivers do not need to fill in the name themselves for bridge address 0.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] v4l2: drop V4L2_CHIP_MATCH_SUBDEV_NAME

After using the new VIDIOC_DBG_G_CHIP_NAME ioctl I realized that the matching
by name possibility is useless. Just drop it and rename MATCH_SUBDEV_IDX to
just MATCH_SUBDEV.
The v4l2-dbg utility is much better placed to match by name by just enumerating
all bridge and subdev devices until chip_name.name matches.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] v4l2: put VIDIOC_DBG_G_CHIP_NAME under ADV_DEBUG

Only enable this ioctl if the VIDEO_ADV_DEBUG config option is set. This
prevents abuse from both userspace and kernelspace (some bridge drivers
abuse DBG_G_CHIP_IDENT, lets prevent that from happening again with this
ioctl).

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] tuner-core/simple: get_rf_strength can be tuner mode specific

The get_rf_strength op in tuner-simple is valid only for the radio mode.
But due to the way get_signal in analog_demod_ops was designed it would
overwrite the signal value with a bogus value when in TV mode.
Pass a pointer to the signal value instead, and when not in radio mode
leave it alone in the tuner-simple.
This broke in commit 030755bde42bbed133182b0ece7c7a9c759478e8
(tuner-core: call has_signal for both TV and radio) in kernel 3.6. Before
that this was working correctly. That commit did the right thing, but what
wasn't realized at the time was that tuner-simple should have been updated
as well to restrict setting the signal strength to the radio mode only.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] tuner-core/tda9887: get_afc can be tuner mode specific

The get_afc op in tda9887 is valid only for the radio mode.
But due to the way get_afc in analog_demod_ops was designed it would
overwrite the afc value with a bogus value when in TV mode.
Pass a pointer to the afc value instead, and when not in radio mode
leave it alone in the tda9887.
This broke a long time ago in 2.6.19 when the get_afc op was introduced.
Before that the afc was only set for radio mode in the tda9887.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] saa7134: v4l2-compliance: clear reserved part of VBI structure

Make saa7134 driver more V4L2 compliant: clear reserved space of VBI
structure to make sure no garbage is left there

Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] saa7134: v4l2-compliance: remove bogus g_parm

Make saa7134 driver more V4L2 compliant: remove empty g_parm function

Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] saa7134: v4l2-compliance: remove bogus audio input support

Make saa7134 driver more V4L2 compliant: remove empty g_audio and s_audio
functions and don't set audioset in enum_input

Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] saa7134: v4l2-compliance: fix g_tuner/s_tuner

Make saa7134 driver more V4L2 compliant: return real frequency range in
g_tuner and fail in s_tuner for non-zero tuner

Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] saa7134: v4l2-compliance: return real frequency

Make saa7134 driver more V4L2 compliant: don't cache frequency in
s_frequency/g_frequency but return real one instead

Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] saa7134: v4l2-compliance: use v4l2_fh to fix priority handling

Make saa7134 driver more V4L2 compliant: remove broken priority handling
and use v4l2_fh instead

Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
[hans.verkuil@cisco.com: fixed a merge conflict in saa7134.h]
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] saa7134: v4l2-compliance: don't report invalid audio modes for radio

Make saa7134 driver more V4L2 compliant: filter audio modes that came from
tuner - keep only MONO/STEREO in radio mode

Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] saa7134: v4l2-compliance: implement V4L2_CAP_DEVICE_CAPS

Make saa7134 driver more V4L2 compliant: implement V4L2_CAP_DEVICE_CAPS support
and fix all capabilities problems reported by v4l2-compliance.

Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] mt9p031: Use the common clock framework

Configure the device external clock using the common clock framework
instead of a board code callback function.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] mt9p031: Add support for regulators

Enable the regulators when powering the sensor up, and disable them when
powering it down.
The regulators are mandatory. Boards that don't allow controlling the
sensor power lines must provide fixed voltage regulators.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] mt9p031: Use devm_* managed helpers

Replace kzalloc and gpio_request_one by their managed equivalents.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] mt9m032: Define MT9M032_READ_MODE1 bits

Replace hardcoded values with #define's.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] mt9m032: Fix PLL setup

The MT9M032 PLL was assumed to be identical to the MT9P031 PLL but
differs significantly. Update the registers definitions and PLL limits
according to the datasheet.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] exynos4-is: Disable debug trace by default in fimc-isp.c

Make sure the debug level is properly set initially so any debug
information is not printed to the kernel log without explicitly
enabling it.

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] exynos4-is: Remove meaningless test before bit setting

There is no need to check same bit before setting it, since we
always end up with a bit set. Remove some of the tests and make
set unconditional, in every place where all that needs to be done
is just setting a bit.

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] exynos4-is: Rename the ISP chain configuration data structure

More appropriate names for the ISP chain data structure.

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>