mm, generic, x86 boot: more tweaks to hex prints of some pfn addresses

Fix some problems with (and applies on top of) a previous patch:
  x86 boot: show pfn addresses in hex not decimal in some kernel info printks

Primarily change "0x%8lx" format, which displays with a right aligned
space filled hex number (spaces between the "0x" prefix and the number),
into "%0#10lx" format, which zero fills instead of space fills, and
which uses the printf flag '#' to request the "0x" prefix instead of
hard coding it.

Also replace some other "0x%lx" formats with "%#lx", making use of the
'#' printf flag again.

Signed-off-by: Paul Jackson <pj@sgi.com>
Cc: "Yinghai Lu" <yhlu.kernel@gmail.com>
Cc: "Jack Steiner" <steiner@sgi.com>
Cc: "Mike Travis" <travis@sgi.com>
Cc: "Huang
Cc: Ying" <ying.huang@intel.com>
Cc: "Andi Kleen" <andi@firstfloor.org>
Cc: "Andrew Morton" <akpm@linux-foundation.org>
Cc: Paul Jackson <pj@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: cleanup e820_setup_gap(), add e820_search_gap(), v2

This is a preparatory patch for the next patch in series.
Moves some code from e820_setup_gap to a new function e820_search_gap.
This patch is a part of a bug fix where we walk the ACPI table to calculate
a gap for PCI optional devices.

v1->v2: Patch on top of tip/master.
Fixes a bug introduced in the last patch about the typeof "last".
Also the new function e820_search_gap now returns if we found a gap in
e820_map.

Signed-off-by: Alok N Kataria <akataria@vmware.com>
Cc: lenb@kernel.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: remove end_pfn in 64bit

and use max_pfn directly.

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: numa 32 using apicid_2_node to get node for logical_apicid

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: change size if e820_update/remove_range

in case someone using crazy parameter while calling them.

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: add table_top check for alloc_low_page in 64 bit

that range is from find_e820_area, so don't try to use end_pfn to see
if out of boundary...use table_top instead to avoid possible strange
result while cross the boundary...

also change early_printk to printk, because init_memory_mapping is after
early param parsing, and console=uart8250 already working at that time.

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: get max_pfn_mapped in init_memory_mapping

so don't shift that in the loop

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: fix e820_update_range size when overlapping

before that we relay on sanitize_e820_map to remove the overlap.

but e820_update_range(,,E820_RESERVED, E820_RAM) will not work

this patch fix that

who is going to use this?

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: introduce init_memory_mapping for 32bit #3

move kva related early backto initmem_init for numa32

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: introduce init_memory_mapping for 32bit #2

moving relocate_initrd early

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: introduce init_memory_mapping for 32bit #1

... so can we use mem below max_low_pfn earlier.

this allows us to move several functions more early instead of waiting
to after paging_init.

That includes moving relocate_initrd() earlier in the bootup, and kva
related early setup done in initmem_init. (in followup patches)

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: unify mmu_context.h

Some amount of asm-x86/mmu_context.h can be unified, including
activate_mm paravirt hook.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: xen-devel <xen-devel@lists.xensource.com>
Cc: Stephen Tweedie <sct@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: unify pgd_index

pgd_index is common for 32 and 64-bit, so move it to a common place.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: xen-devel <xen-devel@lists.xensource.com>
Cc: Stephen Tweedie <sct@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86, 64-bit: use __pgd() on mk_kernel_pgd()

Use __pgd() on mk_kernel_pgd()

Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Cc: xen-devel <xen-devel@lists.xensource.com>
Cc: Stephen Tweedie <sct@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86, 64-bit: add gate_offset() and gate_segment() macros

For calculating the offset from struct gate_struct fields.

[ gate_offset and gate_segment were broken for 32-bit. ]

Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: xen-devel <xen-devel@lists.xensource.com>
Cc: Stephen Tweedie <sct@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86, 64-bit: unify early_ioremap

The 32-bit early_ioremap will work equally well for 64-bit, so just use it.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: xen-devel <xen-devel@lists.xensource.com>
Cc: Stephen Tweedie <sct@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86, 64-bit: use p??_populate() to attach pages to pagetable

Use the _populate() functions to attach new pages to a pagetable, to
make sure the right paravirt_ops calls get called.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: xen-devel <xen-devel@lists.xensource.com>
Cc: Stephen Tweedie <sct@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86, 64-bit: use write_gdt_entry in vsyscall_set_cpu

Use write_gdt_entry to generate the special vgetcpu descriptor in the
vsyscall page.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: xen-devel <xen-devel@lists.xensource.com>
Cc: Stephen Tweedie <sct@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: remove open-coded save/load segment operations

This removes a pile of buggy open-coded implementations of savesegment
and loadsegment.

(They are buggy because they don't have memory barriers to prevent
them from being reordered with respect to memory accesses.)

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: xen-devel <xen-devel@lists.xensource.com>
Cc: Stephen Tweedie <sct@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: add memory barriers to wrmsr

wrmsr is a special instruction which can have arbitrary system-wide
effects.  We don't want the compiler to reorder it with respect to
memory operations, so make it a memory barrier.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: xen-devel <xen-devel@lists.xensource.com>
Cc: Stephen Tweedie <sct@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: add memory clobber to save/loadsegment

Add "memory" clobbers to savesegment and loadsegment, since they can
affect memory accesses and we never want the compiler to reorder them
with respect to memory references.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: xen-devel <xen-devel@lists.xensource.com>
Cc: Stephen Tweedie <sct@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: asm-x86/pgtable.h: fix compiler warning

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: xen-devel <xen-devel@lists.xensource.com>
Cc: Stephen Tweedie <sct@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: nmi_watchdog - introduce nmi_watchdog_active() helper

Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: macro@linux-mips.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: nmi_watchdog - use NMI_NONE by default

There is no need to keep NMI_DISABLED definition and use it
for nmi_watchdog by default. Here is the point why:

- IO-APIC and APIC chips are programmed for nmi_watchdog support at very
  early stage of kernel booting and not having nmi_watchdog specified as
  boot option lead only to nmi_watchdog becomes to NMI_NONE anyway
- enable nmi_watchdog thru /proc/sys/kernel/nmi if it was not specified at
  boot is not possible too (even having this sysfs entry)

Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: macro@linux-mips.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: nmi_watchdog - remove useless check

Since nmi_watchdog is unsigned variable we may
safely remove the check for negative value.

Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: macro@linux-mips.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: nmi_watchdog - use nmi_watchdog variable for printing

Since it is possible NMI_ definitions could be changed
one day we better print out real nmi_watchdog value instead
of constant string.

Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: macro@linux-mips.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: perfctr-watchdog.c - coding style cleanup

Just some code beautification. Nothing else.

Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: macro@linux-mips.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86 boot: more consistently use type int for node ids

Everywhere I look, node id's are of type 'int', except in this one
case, which has 'unsigned long'.  Change this one to 'int' as well.
There is nothing special about the way this variable 'nid' is used in
this routine to justify using an unusual type here.

Signed-off-by: Paul Jackson <pj@sgi.com>
Cc: "Yinghai Lu" <yhlu.kernel@gmail.com>
Cc: "Jack Steiner" <steiner@sgi.com>
Cc: "Mike Travis" <travis@sgi.com>
Cc: "Huang
Cc: Ying" <ying.huang@intel.com>
Cc: "Andi Kleen" <andi@firstfloor.org>
Cc: "Andrew Morton" <akpm@linux-foundation.org>
Cc: Paul Jackson <pj@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86 boot: show pfn addresses in hex not decimal in some kernel info printks

Page frame numbers (the portion of physical addresses above the low
order page offsets) are displayed in several kernel debug and info
prints in decimal, not hex.  Decimal addresse are unreadable.  Use hex.

Signed-off-by: Paul Jackson <pj@sgi.com>
Cc: "Yinghai Lu" <yhlu.kernel@gmail.com>
Cc: "Jack Steiner" <steiner@sgi.com>
Cc: "Mike Travis" <travis@sgi.com>
Cc: "Huang
Cc: Ying" <ying.huang@intel.com>
Cc: "Andi Kleen" <andi@firstfloor.org>
Cc: "Andrew Morton" <akpm@linux-foundation.org>
Cc: Paul Jackson <pj@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86 boot: allow overlapping early reserve memory ranges

Add support for overlapping early memory reservations.

In general, they still can't overlap, and will panic
with "Overlapping early reservations" if they do overlap.

But if a memory range is reserved with the new call:
    reserve_early_overlap_ok()
rather than with the usual call:
    reserve_early()
then subsequent early reservations are allowed to overlap.

This new reserve_early_overlap_ok() call is only used in one
place so far, which is the "BIOS reserved" reservation for the
the EBDA region, which out of Paranoia reserves more than what
the BIOS might have specified, and which thus might overlap with
another legitimate early memory reservation (such as, perhaps,
the EFI memmap.)

Signed-off-by: Paul Jackson <pj@sgi.com>
Cc: "Yinghai Lu" <yhlu.kernel@gmail.com>
Cc: "Jack Steiner" <steiner@sgi.com>
Cc: "Mike Travis" <travis@sgi.com>
Cc: "Huang
Cc: Ying" <ying.huang@intel.com>
Cc: "Andi Kleen" <andi@firstfloor.org>
Cc: "Andrew Morton" <akpm@linux-foundation.org>
Cc: Paul Jackson <pj@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86 boot: x86_64 efi compiler warning fix

Fix a compiler warning.  Rather than always casting a u32 to a pointer
(which generates a warning on x86_64 systems) instead separate the
x86_32 and x86_64 assignments entirely with ifdefs.  Until other recent
changes to this code, it used to have x86_64 separated like this.

Signed-off-by: Paul Jackson <pj@sgi.com>
Cc: "Yinghai Lu" <yhlu.kernel@gmail.com>
Cc: "Jack Steiner" <steiner@sgi.com>
Cc: "Mike Travis" <travis@sgi.com>
Cc: "Huang
Cc: Ying" <ying.huang@intel.com>
Cc: "Andi Kleen" <andi@firstfloor.org>
Cc: "Andrew Morton" <akpm@linux-foundation.org>
Cc: Paul Jackson <pj@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86 boot: e820 code indentation fix

Fix indentation.  An earlier code merge got the
indentation of four lines of code off by a tab.

Signed-off-by: Paul Jackson <pj@sgi.com>
Cc: "Yinghai Lu" <yhlu.kernel@gmail.com>
Cc: "Jack Steiner" <steiner@sgi.com>
Cc: "Mike Travis" <travis@sgi.com>
Cc: "Huang
Cc: Ying" <ying.huang@intel.com>
Cc: "Andi Kleen" <andi@firstfloor.org>
Cc: "Andrew Morton" <akpm@linux-foundation.org>
Cc: Paul Jackson <pj@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: setup_arch 32bit move kvm_guest_init later

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: setup_arch 32bit move command line copying early

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: setup_arch 32bit move efi check later

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: move some func calling from setup_arch to paging_init

those function depend on paging setup pgtable, so they could access
the ram in bootmem region but just get mapped.

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: numa32 pfn print out using hex instead

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: fix compile warning in init_64.c

len is long and ret is only for NUMA

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: build fix

fix:

arch/x86/kernel/setup_32.c:409: error: 'enable_local_apic' undeclared (first use in this function)
arch/x86/kernel/setup_32.c:409: error: (Each undeclared identifier is reported only once
arch/x86/kernel/setup_32.c:409: error: for each function it appears in.)

Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: clean up min_low_pfn

for 32bit
we already had early_res support, so don't need to track min_low_pfn.
keep it to 0 always.

also use init_bootmem_node instead of init_bootmem, so don't touch
min_low_pfn.

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: clean up using max_low_pfn on 32-bit

so that max_low_pfn is not changed after it is set.
so we can move that early and out of initmem_init.

could call find_low_pfn_range just after max_pfn is set.

also could move reserve_initrd out of setup_bootmem_allocator

so 32bit is more like 64bit.

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: move reservetop and vmalloc parsing to pgtable_32.c

also change reserve_top_address to __init attibute

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: move find_max_low_pfn to init_32.c

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: move boot_params declaring to setup.c

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: introduce reserve_initrd

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: introduce initmem_init for 32 bit

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: introduce initmem_init for 64 bit

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: move elfcorehdr parsing to setup.c

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: move reserve_standard_io_resource to setup.c

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: remove two duplicated funcs in setup_32.c

early_cpu_init is declared in processor.h
memory_setup is defined in e820.c

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: merge setup64.c into common_64.c

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: seperate probe_roms into another file

it is only needed for 32bit

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: add e820_remove_range

... so could add real hole in e820

agp check is using request_mem_region, and could fail if e820 is reserved...

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: change identify_cpu to static

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: seperate funcs from setup_64 to cpu common_64.c

Signed-off-by: Yinghai Lu <yhlu.kernel@mail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: remove some acpi ifdefs in setup_32/64

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: clean up init_amd()

1. move out calling of check_enable_amd_mmconf_dmi out of setup_64.c
   put it into init_amd(), so don't need to make extra dmi check for
   system with other cpus.
2. 15 --> 0xf

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: check command line when CONFIG_X86_MPPARSE is not set, v2

if acpi=off, acpi=noirq and pci=noacpi, we need to disable apic.

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: "Maciej W. Rozycki" <macro@linux-mips.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

xen: set max_pfn_mapped

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: Yinghai Lu <yhlu.kernel@gmail.com>
Cc: the arch/x86 maintainers <x86@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cc: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

xen: reserve ISA space in e820 map

[ TODO: release the underlying memory back to Xen. ]

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: Yinghai Lu <yhlu.kernel@gmail.com>
Cc: the arch/x86 maintainers <x86@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cc: Yinghai Lu <yhlu.kernel@gmail.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

xen: reserve Xen-specific memory in e820 map

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: Yinghai Lu <yhlu.kernel@gmail.com>
Cc: the arch/x86 maintainers <x86@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cc: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

RFC x86: try to remove arch_get_ram_range

want to remove arch_get_ram_range, and use early_node_map instead.

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: fix sleep.c build error

fix:

arch/x86/kernel/acpi/sleep.c: In function ‘acpi_save_state_mem':
arch/x86/kernel/acpi/sleep.c:75: error: ‘stack_start' undeclared (first use in this function)
arch/x86/kernel/acpi/sleep.c:75: error: (Each undeclared identifier is reported
only once
arch/x86/kernel/acpi/sleep.c:75: error: for each function it appears in.)

Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: take load_sp0 out of smpboot.c

there's no particular reason to do load_sp0 in different
places for i386 and x86_64. They should all be in cpu_init.
Right now, cpu_init itself is not integrated, but with this patch,
the code becomes closer to each other, making in easier to integrate
when the time comes.

Furthermore, although doing it in do_boot_cpu for x86_64 is fine, since it's
only a copy, load_sp0 should be executed in the cpu it refers to anyway.

Signed-off-by: Glauber Costa <gcosta@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: move cpu_exit_clear to process_32.c

Take it out of smpboot.c, and move it to process_32.c, closer
to its only user.

Signed-off-by: Glauber Costa <gcosta@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: remove cpu from maps

during cpu disable, take cpus out of all maps in i386, instead
of just the online map.

Signed-off-by: Glauber Costa <gcosta@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: change naming to match x86_64

Change unmap_cpu_to_logical_apicid to numa_remove_cpu.
Besides being shorter, it is the same name x86_64 uses. We
can save an ifdef in the code this way.

Signed-off-by: Glauber Costa <gcosta@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: provide connect_bsp_APIC for x86_64

Although it is not really needed, we provide it to get
closer to i386. ifdefs around it are removed in smpboot.c

Signed-off-by: Glauber Costa <gcosta@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: change __setup_vector_irq with setup_vector_irq

We create a version of it for i386, and then take the CONFIG_X86_64
ifdef out of the game. We could create a __setup_vector_irq for i386,
but it would incur in an unnecessary lock taking. Moreover, it is better
practice to only export setup_vector_irq anyway.

Signed-off-by: Glauber Costa <gcosta@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: remove ifdef from stepping

The stepping won't affect x86_64, since there are not x86_64 k7's
or pentiums. So, although it adds to the binary size, remove the ifdef
for smoother integration

Signed-off-by: Glauber Costa <gcosta@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: clearing io_apic harmless for x86_64

so remove ifdef.

Signed-off-by: Glauber Costa <gcosta@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: boot secondary cpus through initial_code

remove "initialize_secondary". Boot both architectures via
initial_code.

Signed-off-by: Glauber Costa <gcosta@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: use initial_code for i386

x86_64 jumps to whatever is written in "initial_code" symbol,
instead of a fixed address. Do it for i386 too. It will allow us
to integrate more of the smp boot code.

Signed-off-by: Glauber Costa <gcosta@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: move x86_64 gdt closer to i386

i386 and x86_64 used two different schemes for maintaining the gdt.
With this patch, x86_64 initial gdt table is defined in a .c file,
same way as i386 is now. Also, we call it "gdt_page", and the descriptor,
"early_gdt_descr". This way we achieve common naming, which can allow for
more code integration.

Signed-off-by: Glauber Costa <gcosta@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: don't use gdt_page openly.

There's a macro available for that.

Signed-off-by: Glauber Costa <gcosta@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: use stack_start in x86_64

call x86_64's init_rsp stack_start, just as i386 does.
Put a zeroed stack segment for consistency. With this,
we can eliminate one ugly ifdef in smpboot.c.

Signed-off-by: Glauber Costa <gcosta@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

build: add __page_aligned_data and __page_aligned_bss

Making a variable page-aligned by using
__attribute__((section(".data.page_aligned"))) is fragile because if
sizeof(variable) is not also a multiple of page size, it leaves
variables in the remainder of the section unaligned.

This patch introduces two new qualifiers, __page_aligned_data and
__page_aligned_bss to set the section *and* the alignment of
variables.  This makes page-aligned variables more robust because the
linker will make sure they're aligned properly.  Unfortunately it
requires *all* page-aligned data to use these macros...

Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: unify crashkernel reservation for 32 and 64 bit

This patch moves the reserve_crashkernel() to setup.c and removes the
architecture-specific version. Both versions were more or less the same.

I tested it on both x86-64 and i386, with CONFIG_KEXEC on and off (so
that it compiles).

Signed-off-by: Bernhard Walle <bwalle@suse.de>
Cc: yhlu.kernel@gmail.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Merge branch 'x86/fixmap' into x86/devel

Conflicts:

arch/x86/mm/init_64.c

Signed-off-by: Ingo Molnar <mingo@elte.hu>

Merge branch 'x86/uv' into x86/devel

x86, SGI UV: uv_ptc_proc_write fix

Someone could write 0 bytes to /proc/sgi_uv/ptc_statistics,
causing
  optstr[count - 1] = '\0';
to write to who-knows-where.

(Andi Kleen noticed this need from a patch I sent for
 similar code in the ia64 world (sn2_ptc_proc_write()).)

(count less than zero is not possible here, as count is unsigned)

Signed-off-by: Cliff Wickman <cpw@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86, SGI UV: TLB shootdown using broadcast assist unit, v6

v6: 6/19 close the security hole in uv_ptc_proc_write())

  > Found a potential security hole while doing that:
  > static ssize_t uv_ptc_proc_write(struct file *file, const char __user *user,
  >                              size_t count, loff_t *data)
  >     if (copy_from_user(optstr, user, count))
  >             return -EFAULT;
  >
  > is count guaranteed to never be larger than 64?

is fixed below.

It adds tlb_uv.o to the Makefile.

Signed-off-by: Cliff Wickman <cpw@sgi.com>
Cc: mingo@elte.hu
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: increase MAX_APICS for very large x86-64 configs

Increase the maximum number of apics when running very large
configurations. This patch has no affect on most systems.

The patch has no effect on any 32-bit kernel. It adds ~4k to the size
of 64-bit kernels but only if NR_CPUS > 255.

Signed-off-by: Jack Steiner <steiner@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: fix stack overflow for large values of MAX_APICS

physid_mask_of_physid() causes a huge stack (12k) to be created if the
number of APICS is large. Replace physid_mask_of_physid() with a
new function that does not create large stacks. This is a problem only
on large x86_64 systems.

this paves the way to increase MAX_APICS.

Signed-off-by: Jack Steiner <steiner@sgi.com>
Cc: linux-mm@kvack.org
Cc: mingo@elte.hu
Cc: tglx@linutronix.de
Signed-off-by: Ingo Molnar <mingo@elte.hu>

SGI UV: TLB shootdown using broadcast assist unit, fix

fix:

arch/x86/kernel/tlb_uv.c: In function ‘uv_table_bases_init':
arch/x86/kernel/tlb_uv.c:612: error: ‘bau_tabsp' undeclared (first use in this function)
arch/x86/kernel/tlb_uv.c:612: error: (Each undeclared identifier is reported only once
arch/x86/kernel/tlb_uv.c:612: error: for each function it appears in.)

Signed-off-by: Ingo Molnar <mingo@elte.hu>

SGI UV: clean up arch/x86/kernel/tlb_uv.c

Signed-off-by: Ingo Molnar <mingo@elte.hu>

SGI UV: TLB shootdown using broadcast assist unit

TLB shootdown for SGI UV.

v5: 6/12 corrections/improvements per Ingo's second review

Signed-off-by: Cliff Wickman <cpw@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

SGI UV: TLB shootdown using broadcast assist unit, cleanups

TLB shootdown for SGI UV.

v1: 6/2 original
v2: 6/3 corrections/improvements per Ingo's review
v3: 6/4 split atomic operations off to a separate patch (Jeremy's review)
v4: 6/12 include <mach_apic.h> rather than <asm/mach-bigsmp/mach_apic.h>
         (fixes a !SMP build problem that Ingo found)
         fix the index on uv_table_bases[blade]

Signed-off-by: Cliff Wickman <cpw@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86 atomic operations: atomic_or_long() atomic_inc_short()

Provide atomic operations for increment of a 16-bit integer and
logical OR into a 64-bit integer.

Signed-off-by: Cliff Wickman <cpw@sgi.com>
Reviewed-by: Jeremy Fitzhardinge <jeremy@goop.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86, SGI UV: TLB shootdown using broadcast assist unit

TLB shootdown for SGI UV.

Depends on patch (in tip/x86/irq):
   x86-update-macros-used-by-uv-platform.patch   Jack Steiner May 29

This patch provides the ability to flush TLB's in cpu's that are not on
the local node.  The hardware mechanism for distributing the flush
messages is the UV's "broadcast assist unit".

The hook to intercept TLB shootdown requests is a 2-line change to
native_flush_tlb_others() (arch/x86/kernel/tlb_64.c).

This code has been tested on a hardware simulator. The real hardware
is not yet available.

The shootdown statistics are provided through /proc/sgi_uv/ptc_statistics.
The use of /sys was considered, but would have required the use of
many /sys files.  The debugfs was also considered, but these statistics
should be available on an ongoing basis, not just for debugging.

Issues to be fixed later:
- The IRQ for the messaging interrupt is currently hardcoded as 200
  (see UV_BAU_MESSAGE).  It should be dynamically assigned in the future.
- The use of appropriate udelay()'s is untested, as they are a problem
  in the simulator.

Signed-off-by: Cliff Wickman <cpw@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Merge branch 'linus' into x86/irq

Merge branch 'x86/nmi' into x86/devel

Conflicts:

arch/x86/kernel/nmi.c
arch/x86/kernel/nmi_32.c

Signed-off-by: Ingo Molnar <mingo@elte.hu>

Merge branch 'x86/numa' into x86/devel

Conflicts:

arch/x86/Kconfig
arch/x86/kernel/e820.c
arch/x86/kernel/efi_64.c
arch/x86/kernel/mpparse.c
arch/x86/kernel/setup.c
arch/x86/kernel/setup_32.c
arch/x86/mm/init_64.c
include/asm-x86/proto.h

Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: use reserve_bootmem_generic() to reserve crashkernel memory on x86_64

This patch uses reserve_bootmem_generic() instead of reserve_bootmem()
to reserve the crashkernel memory on x86_64. That's necessary for NUMA
machines, see 00212fef814612245ed0261cbac8426d0c9a31a5:

  [PATCH] Fix kdump Crash Kernel boot memory reservation for NUMA machines

  This patch will fix a boot memory reservation bug that trashes memory on
  the ES7000 when loading the kdump crash kernel.

  The code in arch/x86_64/kernel/setup.c to reserve boot memory for the crash
  kernel uses the non-numa aware "reserve_bootmem" function instead of the
  NUMA aware "reserve_bootmem_generic".  I checked to make sure that no other
  function was using "reserve_bootmem" and found none, except the ones that
  had NUMA ifdef'ed out.

  I have tested this patch only on an ES7000 with NUMA on and off (numa=off)
  in a single (non-NUMA) and multi-cell (NUMA) configurations.

Signed-off-by: Amul Shah <amul.shah@unisys.com>
  Looks-good-to: Vivek Goyal <vgoyal@in.ibm.com>
Cc: Andi Kleen <ak@muc.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
The switch-back to reserve_bootmem() was accidentally introduced in
5c3391f9f749023a49c64d607da4fb49263690eb when adding the BOOTMEM_EXCLUSIVE
parameter.

Signed-off-by: Bernhard Walle <bwalle@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: add flags parameter to reserve_bootmem_generic()

This patch adds a 'flags' parameter to reserve_bootmem_generic() like it
already has been added in reserve_bootmem() with commit
72a7fe3967dbf86cb34e24fbf1d957fe24d2f246.

It also changes all users to use BOOTMEM_DEFAULT, which doesn't effectively
change the behaviour. Since the change is x86-specific, I don't think it's
necessary to add a new API for migration. There are only 4 users of that
function.

The change is necessary for the next patch, using reserve_bootmem_generic()
for crashkernel reservation.

Signed-off-by: Bernhard Walle <bwalle@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: fix setup.c printk format warning

Fix setup.c printk format warning:

linux-next-20080605/arch/x86/kernel/setup.c: In function 'setup_per_cpu_areas':
linux-next-20080605/arch/x86/kernel/setup.c:173: warning: format '%lu' expects type 'long unsigned int', but argument 2 has type 'ssize_t'

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: don't return invalid pointers from node_to_cpumask()

Signed-off-by: Vegard Nossum <vegard.nossum@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

sched, numa: replace MAX_NUMNODES with nr_node_ids in kernel/sched.c

  * Replace usages of MAX_NUMNODES with nr_node_ids in kernel/sched.c,
    where appropriate.  This saves some allocated space as well as many
    wasted cycles going through node entries that are non-existent.

Signed-off-by: Mike Travis <travis@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: numa_64.c fix shadowed variable

sparse mutters:
arch/x86/mm/numa_64.c:195:27: warning: symbol 'end_pfn' shadows an earlier one

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: numa_64.c make local variables static

plat_node_bdata, cmdline, nodemap_addr, nodemap_size are local to
numa_64.c. Make them static

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>