brking@us.ibm.com [Tue, 3 May 2005 00:50:47 +0000 (19:50 -0500)]
[SCSI] ipr: Fix ipr PCI hotplug hang with CDROM attach
Currently, during PCI hotplug remove, if the upper layer
drivers of the attached devices send commands down as part
of the remove action, like a CDROM, the hotplug action
will hang forever due to the ipr driver returning
SCSI_MLQUEUE_HOST_BUSY. Patch fixes this.
Signed-off-by: Brian King <brking@us.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
Adrian Bunk [Sun, 1 May 2005 23:47:10 +0000 (01:47 +0200)]
[SCSI] drivers/scsi/sym53c416.c: fix a wrong check
The Coverity checker found that this for loop was wrong.
This patch changes it to what seems to be intended.
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
Kai Makisara [Sun, 1 May 2005 15:11:55 +0000 (18:11 +0300)]
[SCSI] SCSI tape: fix permissions for SG_IO, etc.
This patch is against 2.6.12-rc3 + linus-patch from April 30. The patch
contains the following fixes:
- CAP_SYS_RAWIO is used instead of CAP_SYS_ADMIN; fix from Alan Cox
- only direct sending of SCSI commands requires this permission
- the st status is modified is successful unload is performed using
SCSI_IOCTL_STOP_UNIT
Signed-off-by: Kai Makisara <kai.makisara@kolumbus.fi>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
brking@us.ibm.com [Tue, 3 May 2005 00:51:06 +0000 (19:51 -0500)]
[SCSI] ipr: Driver version 2.0.14
Bump driver version
Signed-off-by: Brian King <brking@us.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
brking@us.ibm.com [Tue, 3 May 2005 00:50:59 +0000 (19:50 -0500)]
[SCSI] ipr: Array error logging fix
Bugme 4547. The following patch fixes a bug in ipr's error logging.
Signed-off-by: Brian King <brking@us.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
Jeremy Higdon [Sun, 1 May 2005 12:18:48 +0000 (05:18 -0700)]
[SCSI] qla1280.c - fix result for device Busy and Queue Full
I discovered that the qla1280 driver does not send the correct status
to the midlayer when it gets Queue Full or Busy from a device.
Signed-off-by: Jeremy Higdon <jeremy@sgi.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
Moore, Eric Dean [Sat, 30 Apr 2005 22:09:38 +0000 (17:09 -0500)]
[SCSI] mptfusion: fix panic loading driver statically compiled
Adjust link ordering in the Makefile. Also, the ioc->DoneCtx handles
for mptspi/mptfc in the message frame. And I'm now not seeing the
panic.
Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
James Bottomley [Sat, 30 Apr 2005 22:05:20 +0000 (17:05 -0500)]
[SCSI] ultrastor: fix compile failure
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
Al Viro [Wed, 27 Apr 2005 13:05:56 +0000 (06:05 -0700)]
[SCSI] qla trivial iomem annotation
Signed-off-by: Al Viro <viro@parcelfarce.linux.theplanet.co.uk>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
Mark Haverkamp [Wed, 27 Apr 2005 13:05:51 +0000 (06:05 -0700)]
[SCSI] aacraid: remove sparse warnings
This patch addresses the sparse -Wbitwise warnings that Christoph wanted
me to eliminate. This mostly consisted of making data structure
elements of hardware associated structures the __le* equivalent.
Although there were a couple places where there was mixing of cpu and le
variable math. These changes have been tested on both an x86 and ppc
machine running bonnie++. The usage of the LE32_ALL_ONES macro has been
eliminated.
Signed-off-by: Mark Haverkamp <markh@osdl.org>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
Benoit Boissinot [Tue, 26 Apr 2005 02:46:48 +0000 (19:46 -0700)]
[SCSI] drivers/scsi/dpt_i2o.c: fix compile warnings
This patch fixes the following warnings:
drivers/scsi/dpt_i2o.c: In function ‘adpt_isr’:
drivers/scsi/dpt_i2o.c:2030: warning: passing argument 1 of ‘readl’ makes pointer from integer without a cast
drivers/scsi/dpt_i2o.c:2031: warning: passing argument 1 of ‘readl’ makes pointer from integer without a cast
drivers/scsi/dpt_i2o.c:2042: warning: passing argument 1 of ‘readl’ makes pointer from integer without a cast
drivers/scsi/dpt_i2o.c:2043: warning: passing argument 2 of ‘writel’ makes pointer from integer without a cast
drivers/scsi/dpt_i2o.c:2046: warning: passing argument 1 of ‘readl’ makes pointer from integer without a cast
drivers/scsi/dpt_i2o.c:2048: warning: passing argument 1 of ‘readl’ makes pointer from integer without a cast
drivers/scsi/dpt_i2o.c:2055: warning: passing argument 1 of ‘readl’ makes pointer from integer without a cast
drivers/scsi/dpt_i2o.c:2062: warning: passing argument 1 of ‘readl’ makes pointer from integer without a cast
drivers/scsi/dpt_i2o.c:2069: warning: passing argument 1 of ‘readl’ makes pointer from integer without a cast
drivers/scsi/dpt_i2o.c: In function ‘adpt_i2o_to_scsi’: drivers/scsi/dpt_i2o.c:2239: warning: passing argument 1 of ‘readl’ makes pointer from integer without a cast
drivers/scsi/dpt_i2o.c:2243: warning: passing argument 1 of ‘readl’ makes pointer from integer without a cast
drivers/scsi/dpt_i2o.c:2248: warning: passing argument 1 of ‘readl’ makes pointer from integer without a cast
drivers/scsi/dpt_i2o.c:2259: warning: passing argument 1 of ‘readl’ makes pointer from integer without a cast
It define variables which are only used with a type of 'void __iomem *'
with this type instead of the incorrect 'unsigned long' type.
It also remove pointless casts.
Signed-off-by: Benoit Boissinot <benoit.boissinot@ens-lyon.org>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
Benoit Boissinot [Tue, 26 Apr 2005 02:46:30 +0000 (19:46 -0700)]
[SCSI] drivers/scsi/dpt_i2o.c: cleanup useless code
This patch removes the array 'hbas' as it seems to be useless
and redundant with the linked list hbas_chain.
Signed-off-by: Benoit Boissinot <benoit.boissinot@ens-lyon.org>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
Adrian Bunk [Tue, 26 Apr 2005 02:45:58 +0000 (19:45 -0700)]
[SCSI] drivers/scsi/aacraid/: make some functions static
This patch makes some needlessly global functions static.
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
James Bottomley [Sun, 24 Apr 2005 07:38:05 +0000 (02:38 -0500)]
[SCSI] drivers/scsi/FlashPoint.c: cleanups
From: Adrian Bunk <bunk@stusta.de>
This patch contains cleanups including the following:
- remove #ifdef'ed code for other OS's
- remove other unused code
- make needlessly global code static
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
Adrian Bunk [Sun, 24 Apr 2005 07:34:29 +0000 (02:34 -0500)]
[SCSI] drivers/scsi/NCR53C9x.c: make a struct static
This patch makes a needlessly global struct static.
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
Adrian Bunk [Sun, 24 Apr 2005 07:34:17 +0000 (02:34 -0500)]
[SCSI] drivers/scsi/atp870u.c: make a function static
This patch makes a needlessly global function static.
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
Tejun Heo [Sun, 24 Apr 2005 07:08:52 +0000 (02:08 -0500)]
[SCSI] make scsi_queue_insert() use blk_requeue_request()
scsi_queue_insert() used to use blk_insert_request() for requeueing
requests. This depends on the unobvious behavior of
blk_insert_request() setting REQ_SPECIAL and REQ_SOFTBARRIER when
requeueing. This patch makes scsi_queue_insert() use
blk_requeue_request(). As REQ_SPECIAL means special requests and
REQ_SOFTBARRIER is automatically handled by blk layer now, no flag
needs to be set.
Note that scsi_queue_insert() now calls scsi_run_queue() itself, and
the prototype of the function is added right above
scsi_queue_insert(). This is temporary, as later requeue path
consolidation patchset removes scsi_queue_insert(). By adding
temporary prototype, we can do away with unnecessarily moving
functions.
Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
Tejun Heo [Sun, 24 Apr 2005 07:06:36 +0000 (02:06 -0500)]
[SCSI] make scsi_requeue_request() use blk_requeue_request()
scsi_requeue_request() used to use blk_insert_request() for requeueing
requests. This depends on the unobvious behavior of
blk_insert_request() setting REQ_SPECIAL and REQ_SOFTBARRIER when
requeueing. This patch makes scsi_queue_insert() use
blk_requeue_request(). As REQ_SPECIAL means special requests and
REQ_SOFTBARRIER is automatically handled by blk layer now, no flag
needs to be set.
Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
Tejun Heo [Sun, 24 Apr 2005 07:06:05 +0000 (02:06 -0500)]
[SCSI] remove requeue feature from blk_insert_request()
blk_insert_request() has a unobivous feature of requeuing a
request setting REQ_SPECIAL|REQ_SOFTBARRIER. SCSI midlayer
was the only user and as previous patches removed the usage,
remove the feature from blk_insert_request(). Only special
requests should be queued with blk_insert_request(). All
requeueing should go through blk_requeue_request().
Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
Tejun Heo [Sun, 24 Apr 2005 07:04:53 +0000 (02:04 -0500)]
[SCSI] remove REQ_SPECIAL in scsi_init_io()
scsi_init_io() used to set REQ_SPECIAL when it fails sg
allocation before requeueing the request by returning
BLKPREP_DEFER. REQ_SPECIAL is being updated to mean special
requests. So, remove REQ_SPECIAL setting.
Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
Tejun Heo [Sun, 24 Apr 2005 07:04:21 +0000 (02:04 -0500)]
[SCSI] make blk layer set REQ_SOFTBARRIER on defer and requeue
This is the reworked version of the patch. It sets REQ_SOFTBARRIER
in two places - in elv_next_request() on BLKPREP_DEFER and in
blk_requeue_request().
Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
Andrew Vasquez [Sat, 23 Apr 2005 06:47:27 +0000 (02:47 -0400)]
[SCSI] remove some dead code in qla2xxx
Original from: Christoph Hellwig <hch@lst.de>
Modified and
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
James Bottomley [Sat, 23 Apr 2005 06:45:48 +0000 (02:45 -0400)]
[SCSI] mptfusion: correct Kconfig problem
The fusion Kconfig forgets to set CONFIG_FUSION, which is required to
get the upper makefile to descend into the fusion directory. Add this
back as a variable and make the two upper level modules select it.
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
Moore, Eric Dean [Fri, 22 Apr 2005 22:02:41 +0000 (18:02 -0400)]
[SCSI] mptfusion: mptfc Adding Stub Driver - Fiber Channel
(1) mptfc.c: This driver is having module_init, module_exit, and probe.
(2) mptfc.c: Registering for Fibre Channel pci ids are done from this
module.
(3) mptfc.c: Convert MODULE_PARM to module_param
Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
Moore, Eric Dean [Fri, 22 Apr 2005 22:02:25 +0000 (18:02 -0400)]
[SCSI] mptfusion: mptspi Adding Stub Driver - SCSI Parallel
(1) mptspi.c: This driver is having module_init, module_exit, and probe.
(2) mptspi.c: Registering for SCSI pci ids are done from this module.
(3) mptspi.c: Convert MODULE_PARM to module_param
Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
Moore, Eric Dean [Fri, 22 Apr 2005 22:02:09 +0000 (18:02 -0400)]
[SCSI] mptfusion: mptscsih Split driver support
(1) mptscsih.c: Remove credits, -sralston references , update copyright
(2) mptscsih.c: split driver support
(3) mptscsih.c: module_init, module_exit, and probe routines moved to new
stub drivers, mptfc and mptspi
(4) mptscsih.c: some global parameters are moved to MPT_SCSI_HOST
(5) mptscsih.c: removed scsi_device_online check.
Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
Moore, Eric Dean [Fri, 22 Apr 2005 22:01:52 +0000 (18:01 -0400)]
[SCSI] mptfusion: mptlan Remove credits and update copyright
(1) mptlan.c: Remove credits and update copyright
(2) mptlan.c: Remove -sralston references
Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
Moore, Eric Dean [Fri, 22 Apr 2005 22:01:34 +0000 (18:01 -0400)]
[SCSI] mptfusion: mptctl Remove credits and update copyright
(1) mptctl.c: Remove credits and update copyright
(2) mptctl.c: cleanup in get_iocinfo
Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
Moore, Eric Dean [Fri, 22 Apr 2005 22:01:16 +0000 (18:01 -0400)]
[SCSI] mptfusion: mptbase cleanup, split driver support, DMA 32_BIT_MASK
(1) mptbase.c: Move registering pci ids to scsi lld drivers
(2) mptbase.c: Use the DMA_32BIT_MASK constant
(3) mptbase.c: Fix for multiple pci domains
(4) mptbase.c: Remove le32 conversion from BlockSize, which was u8 size
(5) mptbase.c: Remove credits, -sralston references , update copyright
(6) mptbase.c: split driver support
Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
Moore, Eric Dean [Fri, 22 Apr 2005 22:00:52 +0000 (18:00 -0400)]
[SCSI] mptfusion: Kconfig Adding new bus type drivers for fusion drivers.
(1) Kconfig - added new mptspi and mptfc scsi lld drivers
(2) Kconfig - increased MAX_SGE from 40 to 128
(2) Makefile - compilation support for split drivers
(3) Makefile - cleaned up debug defines; e.g. removed obsolete, added others
Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
James Bottomley [Fri, 22 Apr 2005 02:50:33 +0000 (22:50 -0400)]
[SCSI] remove PCI2000 and PCI2220i drivers
From: Christoph Hellwig <hch@lst.de>
Both drivers are marked broken and haven't compiled since very early
2.5.x. And they're for IDE hardware so they shouldn't have been
written to the SCSI layer at all.
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
James Bottomley [Fri, 22 Apr 2005 01:46:50 +0000 (21:46 -0400)]
[SCSI] qla1280: update firmware
Update SCSI firmware images:
ql1040_fw.h:
- * Firmware Version 7.65.00 (14:17 Jul 20, 1999)
+ * Firmware Version 7.65.06 (14:38 Jan 07, 2002)
ql1280_fw.h:
- * Firmware Version 8.15.00 (14:35 Aug 22, 2000)
+ * Firmware Version 8.15.11 (10:20 Jan 02, 2002)
ql12160_fw.h:
- * Firmware Version 10.04.32 (12:03 May 09, 2001)
+ * Firmware Version 10.04.42 (15:44 Apr 18, 2003)
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
Andreas Herrmann [Thu, 21 Apr 2005 20:14:31 +0000 (16:14 -0400)]
[SCSI] zfcp: fix compile error
Signed-off-by: Andreas Herrmann <aherrman@de.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
Nate Dailey [Thu, 21 Apr 2005 20:14:05 +0000 (16:14 -0400)]
[SCSI] drivers/scsi/sr_ioctl.c: check for failed allocation
I noticed a case in sr_ioctl.c's sr_get_mcn where a buffer is
allocated, but the pointer isn't checked for null.
Signed-off-by: Nate Dailey <nate.dailey@stratus.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
Christoph Hellwig [Thu, 21 Apr 2005 20:13:39 +0000 (16:13 -0400)]
[SCSI] aic7xxx: remove inquiry sniffing leftovers
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
Andrew Vasquez [Thu, 21 Apr 2005 20:13:36 +0000 (16:13 -0400)]
[SCSI] qla2xxx: remove a transport #include
Make transport-functions structure non-static. Replace #include of
scsi_transport.h with a forward declaration.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
Richard Henderson [Thu, 21 Apr 2005 18:28:26 +0000 (11:28 -0700)]
[PATCH] alpha: key management syscalls
Allocate syscall numbers for add_key, request_key, keyctl.
Karsten Keil [Thu, 21 Apr 2005 15:30:30 +0000 (08:30 -0700)]
[PATCH] fix for ISDN ippp filtering
We do not longer use DLT_LINUX_SLL for activ/pass filters but
DLT_PPP_WITHDIRECTION witch need 1 as outbound flag.
Signed-off-by: Karsten Keil <kkeil@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Alexander Nyberg [Thu, 21 Apr 2005 14:59:51 +0000 (07:59 -0700)]
[PATCH] x86_64: Bug in new out of line put_user()
The new out of line put_user() assembly on x86_64 changes %rcx without
telling GCC about it causing things like:
http://bugme.osdl.org/show_bug.cgi?id=4515
See to it that %rcx is not changed (made it consistent with get_user()).
Signed-off-by: Alexander Nyberg <alexn@telia.com>
Signed-off-by: ak@suse.de
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Linus Torvalds [Thu, 21 Apr 2005 14:36:42 +0000 (07:36 -0700)]
Merge /pub/linux/kernel/people/davem/sparc-2.6.git
James Bottomley [Thu, 21 Apr 2005 14:35:45 +0000 (07:35 -0700)]
[PATCH] Fix aic7xxx_osm.c compile with older gcc's
My version of gcc doesn't warn about this error (declaration in the
middle of a set of statements).
The fix is simple (this also corrects return code; for init functions it
should be zero or error).
Al Viro [Thu, 21 Apr 2005 00:12:41 +0000 (17:12 -0700)]
[SPARC64]: sparc64 preempt + smp
PREEMPT+SMP support - see if it looks sane...
Signed-off-by: Al Viro <viro@parcelfarce.linux.theplanet.co.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Wed, 20 Apr 2005 23:24:21 +0000 (16:24 -0700)]
Linux v2.6.12-rc3
Releasing this will also make "git" the official source control
thing. Here's to hoping for the best.
Herbert Xu [Wed, 20 Apr 2005 05:48:59 +0000 (22:48 -0700)]
[IPSEC]: COW skb header in UDP decap
The following patch just makes the header part of the skb writeable.
This is needed since we modify the IP headers just a few lines below.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Herbert Xu [Wed, 20 Apr 2005 05:44:17 +0000 (22:44 -0700)]
[ATALK]: Add missing dev_hold() to atrtr_create().
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Arnaldo Carvalho de Melo [Wed, 20 Apr 2005 05:41:54 +0000 (22:41 -0700)]
[SOCK]: on failure free the sock from the right place
Signed-off-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stephen Hemminger [Wed, 20 Apr 2005 05:39:42 +0000 (22:39 -0700)]
[NET]: skbuff: remove old NET_CALLER macro
Here is a revised alternative that uses BUG_ON/WARN_ON
(as suggested by Herbert Xu) to eliminate NET_CALLER.
Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 20 Apr 2005 05:37:04 +0000 (22:37 -0700)]
[RTNETLINK]: Add comma to final entry in link_rtnetlink_table
Noticed by Herbert Xu.
Signed-off-by: David S. Miller <davem@davemloft.net>
Thomas Graf [Wed, 20 Apr 2005 05:35:07 +0000 (22:35 -0700)]
[RTNETLINK]: Protocol family wildcard dumping for routing rules
Be kind to userspace and don't force them to hardcode protocol
families just to have it changed again once we support routing
rules for more than one protocol family.
Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Herbert Xu [Wed, 20 Apr 2005 05:32:22 +0000 (22:32 -0700)]
[IPV6]: Replace bogus instances of inet->recverr
While looking at this problem I noticed that IPv6 was sometimes
looking at inet->recverr which is bogus. Here is a patch to
correct that and use np->recverr.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Herbert Xu [Wed, 20 Apr 2005 05:30:14 +0000 (22:30 -0700)]
[IPV6]: IPV6_CHECKSUM socket option can corrupt kernel memory
So here is a patch that introduces skb_store_bits -- the opposite of
skb_copy_bits, and uses them to read/write the csum field in rawv6.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
YOSHIFUJI Hideaki [Wed, 20 Apr 2005 05:27:09 +0000 (22:27 -0700)]
[IPV6]: Fix a branch prediction
From: Tushar Gohad <tgohad@mvista.com>
Signed-off-by: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Herbert Xu [Wed, 20 Apr 2005 03:46:37 +0000 (20:46 -0700)]
[NET]: Shave sizeof(ptr) bytes off dst_entry
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Hugh Dickins [Tue, 19 Apr 2005 20:29:23 +0000 (13:29 -0700)]
[PATCH] freepgt: remove FIRST_USER_ADDRESS hack
Once all the MMU architectures define FIRST_USER_ADDRESS, remove hack from
mmap.c which derived it from FIRST_USER_PGD_NR.
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Hugh Dickins [Tue, 19 Apr 2005 20:29:23 +0000 (13:29 -0700)]
[PATCH] freepgt: arch FIRST_USER_ADDRESS 0
Replace misleading definition of FIRST_USER_PGD_NR 0 by definition of
FIRST_USER_ADDRESS 0 in all the MMU architectures beyond arm and arm26.
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Hugh Dickins [Tue, 19 Apr 2005 20:29:22 +0000 (13:29 -0700)]
[PATCH] freepgt: arm26 FIRST_USER_ADDRESS PAGE_SIZE
ARM26 define FIRST_USER_ADDRESS as PAGE_SIZE (beyond the machine vectors when
they are mapped low), and use that definition in place of locally defined
MIN_MAP_ADDR. Previously, ARM26 permitted user mappings at 0 if the machine
vectors were mapped high; but that's inconsistent with ARM, and
FIRST_USER_ADDRESS would then have to be determined at runtime. Let's fix it
at PAGE_SIZE throughout the architecture.
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Hugh Dickins [Tue, 19 Apr 2005 20:29:21 +0000 (13:29 -0700)]
[PATCH] freepgt: arm FIRST_USER_ADDRESS PAGE_SIZE
ARM define FIRST_USER_ADDRESS as PAGE_SIZE (beyond the machine vectors when
they are mapped low), and use that definition in place of locally defined
MIN_MAP_ADDR.
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Hugh Dickins [Tue, 19 Apr 2005 20:29:20 +0000 (13:29 -0700)]
[PATCH] freepgt: sys_mincore ignore FIRST_USER_PGD_NR
Remove use of FIRST_USER_PGD_NR from sys_mincore: it's inconsistent (no other
syscall refers to it), unnecessary (sys_mincore loops over vmas further down)
and incorrect (misses user addresses in ARM's first pgd).
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Hugh Dickins [Tue, 19 Apr 2005 20:29:19 +0000 (13:29 -0700)]
[PATCH] freepgt: free_pgtables from FIRST_USER_ADDRESS
The patches to free_pgtables by vma left problems on any architectures which
leave some user address page table entries unencapsulated by vma. Andi has
fixed the 32-bit vDSO on x86_64 to use a vma. Now fix arm (and arm26), whose
first PAGE_SIZE is reserved (perhaps) for machine vectors.
Our calls to free_pgtables must not touch that area, and exit_mmap's
BUG_ON(nr_ptes) must allow that arm's get_pgd_slow may (or may not) have
allocated an extra page table, which its free_pgd_slow would free later.
FIRST_USER_PGD_NR has misled me and others: until all the arches define
FIRST_USER_ADDRESS instead, a hack in mmap.c to derive one from t'other. This
patch fixes the bugs, the remaining patches just clean it up.
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Hugh Dickins [Tue, 19 Apr 2005 20:29:18 +0000 (13:29 -0700)]
[PATCH] freepgt: hugetlb area is clean
Once we're strict about clearing away page tables, hugetlb_prefault can assume
there are no page tables left within its range. Since the other arches
continue if !pte_none here, let i386 do the same.
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Hugh Dickins [Tue, 19 Apr 2005 20:29:18 +0000 (13:29 -0700)]
[PATCH] freepgt: mpnt to vma cleanup
While dabbling here in mmap.c, clean up mysterious "mpnt"s to "vma"s.
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Hugh Dickins [Tue, 19 Apr 2005 20:29:17 +0000 (13:29 -0700)]
[PATCH] freepgt: remove arch pgd_addr_end
ia64 and sparc64 hurriedly had to introduce their own variants of
pgd_addr_end, to leapfrog over the holes in their virtual address spaces which
the final clear_page_range suddenly presented when converted from pgd_index to
pgd_addr_end. But now that free_pgtables respects the vma list, those holes
are never presented, and the arch variants can go.
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Hugh Dickins [Tue, 19 Apr 2005 20:29:16 +0000 (13:29 -0700)]
[PATCH] freepgt: hugetlb_free_pgd_range
ia64 and ppc64 had hugetlb_free_pgtables functions which were no longer being
called, and it wasn't obvious what to do about them.
The ppc64 case turns out to be easy: the associated tables are noted elsewhere
and freed later, safe to either skip its hugetlb areas or go through the
motions of freeing nothing. Since ia64 does need a special case, restore to
ppc64 the special case of skipping them.
The ia64 hugetlb case has been broken since pgd_addr_end went in, though it
probably appeared to work okay if you just had one such area; in fact it's
been broken much longer if you consider a long munmap spanning from another
region into the hugetlb region.
In the ia64 hugetlb region, more virtual address bits are available than in
the other regions, yet the page tables are structured the same way: the page
at the bottom is larger. Here we need to scale down each addr before passing
it to the standard free_pgd_range. Was about to write a hugely_scaled_down
macro, but found htlbpage_to_page already exists for just this purpose. Fixed
off-by-one in ia64 is_hugepage_only_range.
Uninline free_pgd_range to make it available to ia64. Make sure the
vma-gathering loop in free_pgtables cannot join a hugepage_only_range to any
other (safe to join huges? probably but don't bother).
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Hugh Dickins [Tue, 19 Apr 2005 20:29:15 +0000 (13:29 -0700)]
[PATCH] freepgt: remove MM_VM_SIZE(mm)
There's only one usage of MM_VM_SIZE(mm) left, and it's a troublesome macro
because mm doesn't contain the (32-bit emulation?) info needed. But it too is
only needed because we ignore the end from the vma list.
We could make flush_pgtables return that end, or unmap_vmas. Choose the
latter, since it's a natural fit with unmap_mapping_range_vma needing to know
its restart addr. This does make more than minimal change, but if unmap_vmas
had returned the end before, this is how we'd have done it, rather than
storing the break_addr in zap_details.
unmap_vmas used to return count of vmas scanned, but that's just debug which
hasn't been useful in a while; and if we want the map_count 0 on exit check
back, it can easily come from the final remove_vm_struct loop.
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Hugh Dickins [Tue, 19 Apr 2005 20:29:15 +0000 (13:29 -0700)]
[PATCH] freepgt: free_pgtables use vma list
Recent woes with some arches needing their own pgd_addr_end macro; and 4-level
clear_page_range regression since 2.6.10's clear_page_tables; and its
long-standing well-known inefficiency in searching throughout the higher-level
page tables for those few entries to clear and free: all can be blamed on
ignoring the list of vmas when we free page tables.
Replace exit_mmap's clear_page_range of the total user address space by
free_pgtables operating on the mm's vma list; unmap_region use it in the same
way, giving floor and ceiling beyond which it may not free tables. This
brings lmbench fork/exec/sh numbers back to 2.6.10 (unless preempt is enabled,
in which case latency fixes spoil unmap_vmas throughput).
Beware: the do_mmap_pgoff driver failure case must now use unmap_region
instead of zap_page_range, since a page table might have been allocated, and
can only be freed while it is touched by some vma.
Move free_pgtables from mmap.c to memory.c, where its lower levels are adapted
from the clear_page_range levels. (Most of free_pgtables' old code was
actually for a non-existent case, prev not properly set up, dating from before
hch gave us split_vma.) Pass mmu_gather** in the public interfaces, since we
might want to add latency lockdrops later; but no attempt to do so yet, going
by vma should itself reduce latency.
But what if is_hugepage_only_range? Those ia64 and ppc64 cases need careful
examination: put that off until a later patch of the series.
What of x86_64's 32bit vdso page __map_syscall32 maps outside any vma?
And the range to sparc64's flush_tlb_pgtables? It's less clear to me now that
we need to do more than is done here - every PMD_SIZE ever occupied will be
flushed, do we really have to flush every PGDIR_SIZE ever partially occupied?
A shame to complicate it unnecessarily.
Special thanks to David Miller for time spent repairing my ceilings.
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Linus Torvalds [Tue, 19 Apr 2005 20:14:28 +0000 (13:14 -0700)]
Merge ... /linux/kernel/git/gregkh/driver-2.6.git/
for 13 driver core, sysfs, and debugfs fixes.
Linus Torvalds [Tue, 19 Apr 2005 20:12:03 +0000 (13:12 -0700)]
Merge ... /linux/kernel/git/gregkh/aoe-2.6.git/
for 11 aoe bugfix patches.
Linus Torvalds [Tue, 19 Apr 2005 14:31:40 +0000 (07:31 -0700)]
Merge /linux/kernel/git/gregkh/i2c-2.6.git/
Linus Torvalds [Tue, 19 Apr 2005 14:28:57 +0000 (07:28 -0700)]
Merge ... Greg's USB tree at /linux/kernel/git/gregkh/usb-2.6.git/
Yah, it does work to merge. Knock wood.
ecashin@coraid.com [Tue, 19 Apr 2005 05:00:22 +0000 (22:00 -0700)]
[PATCH] aoe 12/12: send outgoing packets in order
I can't use list.h, since sk_buff doesn't have a list_head but instead
has two struct sk_buff pointers, and I want to avoid any extra memory
allocation.
send outgoing packets in order
Signed-off-by: Ed L. Cashin <ecashin@coraid.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
ecashin@coraid.com [Tue, 19 Apr 2005 05:00:22 +0000 (22:00 -0700)]
[PATCH] aoe 11/12: add support for disk statistics
add support for disk statistics
Signed-off-by: Ed L. Cashin <ecashin@coraid.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
ecashin@coraid.com [Tue, 19 Apr 2005 05:00:21 +0000 (22:00 -0700)]
[PATCH] aoe 9/12: add note about the need for deadlock-free sk_buff allocation
add note about the need for deadlock-free sk_buff allocation
Signed-off-by: Ed L. Cashin <ecashin@coraid.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
ecashin@coraid.com [Tue, 19 Apr 2005 05:00:20 +0000 (22:00 -0700)]
[PATCH] aoe 8/12: document env var for specifying number
document env var for specifying number of partitions per dev
Signed-off-by: Ed L. Cashin <ecashin@coraid.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
ecashin@coraid.com [Tue, 19 Apr 2005 05:00:20 +0000 (22:00 -0700)]
[PATCH] aoe 6/12: Alexey Dobriyan sparse cleanup
Alexey Dobriyan sparse cleanup
Signed-off-by: Alexey Dobriyan <adobriyan@mail.ru>
Signed-off-by: Ed L. Cashin <ecashin@coraid.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
ecashin@coraid.com [Tue, 19 Apr 2005 05:00:19 +0000 (22:00 -0700)]
[PATCH] aoe 5/12: don't try to free null bufpool
don't try to free null bufpool
Signed-off-by: Ed L. Cashin <ecashin@coraid.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
ecashin@coraid.com [Tue, 19 Apr 2005 05:00:19 +0000 (22:00 -0700)]
[PATCH] aoe 4/12: handle distros that have a udev rules
handle distros that have a udev rules file instead of dir
Signed-off-by: Ed L. Cashin <ecashin@coraid.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
ecashin@coraid.com [Tue, 19 Apr 2005 05:00:18 +0000 (22:00 -0700)]
[PATCH] aoe 3/12: update driver version to 6
update driver version to 6
Signed-off-by: Ed L. Cashin <ecashin@coraid.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
ecashin@coraid.com [Tue, 19 Apr 2005 05:00:18 +0000 (22:00 -0700)]
[PATCH] aoe 2/12: allow multiple aoe devices with same MAC
allow multiple aoe devices with same MAC addr
Signed-off-by: Ed L. Cashin <ecashin@coraid.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
ecashin@coraid.com [Tue, 19 Apr 2005 05:00:17 +0000 (22:00 -0700)]
[PATCH] aoe 1/12: remove too-low cap on minor number
remove too-low cap on minor number
Signed-off-by: Ed L. Cashin <ecashin@coraid.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
kay.sievers@vrfy.org [Tue, 19 Apr 2005 04:57:37 +0000 (21:57 -0700)]
[PATCH] kobject/hotplug split - net bridge
kobject_add() and kobject_del() don't emit hotplug events anymore.
We need to do it ourselves now.
Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
kay.sievers@vrfy.org [Tue, 19 Apr 2005 04:57:37 +0000 (21:57 -0700)]
[PATCH] kobject/hotplug split - usb cris
kobject_add() and kobject_del() don't emit hotplug events anymore.
We need to do it ourselves now.
Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
kay.sievers@vrfy.org [Tue, 19 Apr 2005 04:57:36 +0000 (21:57 -0700)]
[PATCH] kobject/hotplug split - devices core
kobject_add() and kobject_del() don't emit hotplug events anymore. Do it
ourselves if we are finished populating the device directory.
Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
kay.sievers@vrfy.org [Tue, 19 Apr 2005 04:57:36 +0000 (21:57 -0700)]
[PATCH] kobject/hotplug split - block core
kobject_add() and kobject_del() don't emit hotplug events anymore. Do it
ourselves if we are finished populating the device directory.
Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
kay.sievers@vrfy.org [Tue, 19 Apr 2005 04:57:35 +0000 (21:57 -0700)]
[PATCH] kobject/hotplug split - class core
kobject_add() and kobject_del() don't emit hotplug events anymore. Do it
ourselves if we are finished populating the device directory.
Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
kay.sievers@vrfy.org [Tue, 19 Apr 2005 04:57:34 +0000 (21:57 -0700)]
[PATCH] kobject/hotplug split - kobject add/remove
kobject_add() and kobject_del() don't emit hotplug events anymore.
The user should do it itself if it has finished populating the device
directory.
Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Michal Ostrowski [Tue, 19 Apr 2005 04:57:34 +0000 (21:57 -0700)]
[PATCH] debugfs: fix !debugfs prototypes
- Fix prototypes for debugfs functions (in configurations where
debugfs is disabled).
Signed-off-by: Michal Ostrowski <mostrows@speakeasy.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Roland Dreier [Tue, 19 Apr 2005 04:57:33 +0000 (21:57 -0700)]
[PATCH] debugfs: Reduce <linux/debugfs.h> dependencies
The current <linux/debugfs.h> include file is a little fragile in that
it is not self-contained and hence may cause compile warnings or
errors depending on the files included before it, the kernel config
and the architecture. This patch makes things a little more robust by:
- including <linux/types.h> to get definitions of u32, mode_t, and so on.
- forward declaring struct file_operations.
- including <linux/err.h> when CONFIG_DEBUG_FS is not set
The last change is particularly useful, as a kernel developer is
likely to build with debugfs always enabled and never see the build
breakage cased if debugfs is disabled.
Signed-off-by: Roland Dreier <roland@topspin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Steven Cole [Tue, 19 Apr 2005 04:57:33 +0000 (21:57 -0700)]
[PATCH] 2.6.12-rc1-mm3 Fix ver_linux script for no udev utils.
Without the attached patch, the ver_linux script gives
the following if udev utils are not present.
./scripts/ver_linux: line 90: udevinfo: command not found
The patch causes ver_linux to be silent in the case of
no udevinfo command.
Signed-off-by: Steven Cole <elenstev@mesatop.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Robert Schwebel [Tue, 19 Apr 2005 04:57:32 +0000 (21:57 -0700)]
[PATCH] export platform_add_devices
platform_add_devices can be used from within modules, so it should be
exported. This can for example happen if you have hotpluggable firmware in
an FPGA on a system on chip processor; in our case the FPGA is probed for
devices and the FPGA base code registers the devices it has found with the
kernel.
(akpm: I think this is reasonable from a licensing POV: it's unlikely that
anyone would be interested in merging such specialised modules into mainline,
and it's a GPL export).
Signed-off-by: Robert Schwebel <r.schwebel@pengutronix.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Kay Sievers [Tue, 19 Apr 2005 04:57:32 +0000 (21:57 -0700)]
[PATCH] sysfs: add sysfs_chmod_file()
sysfs: allow changing the permissions for already created attributes
Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
kay.sievers@vrfy.org [Tue, 19 Apr 2005 04:57:31 +0000 (21:57 -0700)]
[PATCH] add TIMEOUT to firmware_class hotplug event
On Tue, 2005-03-15 at 09:25 +0100, Hannes Reinecke wrote:
> The current implementation of the firmware class breaks a fundamental
> assumption in udevd: that the physical device can be initialised fully
> prior to executing the next event for that device.
Here we add a TIMEOUT value to the hotplug environment of the firmware
requesting event. I will adapt udevd not to wait for anything else, if
it finds a TIMEOUT key.
Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
gregkh@suse.de [Tue, 19 Apr 2005 04:57:30 +0000 (21:57 -0700)]
[PATCH] kref: add link to original documentation to the kref documentation.
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
minyard@acm.org [Tue, 19 Apr 2005 04:57:30 +0000 (21:57 -0700)]
[PATCH] kref: add documentation
Add some documentation for krefs.
Signed-off-by: Corey Minyard <minyard@acm.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Jean Delvare [Tue, 19 Apr 2005 04:16:59 +0000 (21:16 -0700)]
[PATCH] I2C: Fix incorrect sysfs file permissions in it87 and via686a drivers
The it87 and via686a hardware monitoring drivers each create a sysfs
file named "alarms" in R/W mode, while they should really create it in
read-only mode. Since we don't provide a store function for these files,
write attempts to these files will do something undefined (I guess) and
bad (I am sure). My own try resulted in a locked terminal (where I
attempted the write) and a 100% CPU load until next reboot.
As a side note, wouldn't it make sense to check, when creating sysfs
files, that readable files have a non-NULL show method, and writable
files have a non-NULL store method? I know drivers are not supposed to
do stupid things, but there is already a BUG_ON for several conditions
in sysfs_create_file, so maybe we could add two more?
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Jean Delvare [Tue, 19 Apr 2005 04:16:58 +0000 (21:16 -0700)]
[PATCH] I2C: via686a cleanups
Here comes a small cleanup patch for the via686a driver. I noticed the
following two non-fatal problems:
1* The device parent is explicitely set, but it's not needed because the
i2c core will do as the client is registered.
2* snprintf is used where strlcpy would suffice.
Fixing them brings the via686a driver in line with what other similar
drivers do.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
johnpol@2ka.mipt.ru [Tue, 19 Apr 2005 04:16:57 +0000 (21:16 -0700)]
[PATCH] w1_smem: w1 ID is only 8 bytes long.
w1 ID is only 8 bytes long.
Signed-off-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
johnpol@2ka.mipt.ru [Tue, 19 Apr 2005 04:16:57 +0000 (21:16 -0700)]
[PATCH] w1: real fix for big endian machines.
Real fix for big endian machines - crc must be calculated
using little endian byte order.
Signed-off-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
James Bottomley [Tue, 19 Apr 2005 01:55:09 +0000 (20:55 -0500)]
fully merge up to scsi-misc-2.6
Viktor A. Danilov [Tue, 19 Apr 2005 00:39:35 +0000 (17:39 -0700)]
[PATCH] USB: fix AIPTEK input doesn`t register `device` & `driver` section in sysfs (/sys/class/input/event#)
PROBLEM: aiptek input doesn`t register `device` & `driver` section in sysfs (/sys/class/input/event#)
REASON: `dev` - field not filled...
SOLUTION: in linux/drivers/usb/input/aiptek.c write
aiptek->inputdev.dev = &intf->dev;
before calling
input_register_device(&aiptek->inputdev);
From: "Viktor A. Danilov" <__die@mail.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Index: gregkh-2.6/drivers/usb/input/aiptek.c
===================================================================
David Brownell [Tue, 19 Apr 2005 00:39:34 +0000 (17:39 -0700)]
[PATCH] usb gadget: ethernet/rndis updates
Updates to the Ethernet/RNDIS gadget driver (mostly for RNDIS):
- Fix brown-paper bag goof with RNDIS packet TX ... the wrong length
field got set, so Windows would ignore data packets it received.
- More consistent handling of CDC output filters (but not yet hooking
things up so RNDIS uses the mechanism).
- Zerocopy RX for RNDIS packets too (saving CPU cycles).
- Use the pre-allocated interrupt/status request and buffer, rather
than allocating and freeing one of each every few seconds (which
could fail).
- Some more "sparse" tweaks, making both dual-speed and single-speed
configurations happier.
- RNDIS speeds are reported in units of 100bps, not bps.
Plus two minor cleanups (whitespace, messaging).
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>