9p/net: Fix zero-copy path in the 9p virtio transport

commit d28c756caee6e414d9ba367d0b92da24145af2a8 upstream.

The zero-copy optimization when reading or writing large chunks of data
is quite useful.  However, the 9p messages created through the zero-copy
write path have an incorrect message size: it should be the size of the
header + size of the data being written but instead it's just the size
of the header.

This only works if the server ignores the size field of the message and
otherwise breaks the framing of the protocol. Fix this by re-writing the
message size field with the correct value.

Tested by running `dd if=/dev/zero of=out bs=4k count=1` inside a
virtio-9p mount.

Link: http://lkml.kernel.org/r/20180717003529.114368-1-chirantan@chromium.org
Signed-off-by: Chirantan Ekbote <chirantan@chromium.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Tested-by: Greg Kurz <groug@kaod.org>
Cc: Dylan Reid <dgreid@chromium.org>
Cc: Guenter Roeck <groeck@chromium.org>
Cc: stable@vger.kernel.org
Signed-off-by: Dominique Martinet <dominique.martinet@cea.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: mac802154: tx: expand tailroom if necessary

commit f9c52831133050c6b82aa8b6831c92da2bbf2a0b upstream.

This patch is necessary if case of AF_PACKET or other socket interface
which I am aware of it and didn't allocated the necessary room.

Reported-by: David Palma <david.palma@ntnu.no>
Reported-by: Rabi Narayan Sahoo <rabinarayans0828@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Alexander Aring <aring@mojatatu.com>
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: 6lowpan: fix reserved space for single frames

commit ac74f87c789af40936a80131c4759f3e72579c3a upstream.

This patch fixes patch add handling to take care tail and headroom for
single 6lowpan frames. We need to be sure we have a skb with the right
head and tailroom for single frames. This patch do it by using
skb_copy_expand() if head and tailroom is not enough allocated by upper
layer.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=195059
Reported-by: David Palma <david.palma@ntnu.no>
Reported-by: Rabi Narayan Sahoo <rabinarayans0828@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Alexander Aring <aring@mojatatu.com>
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 4.9.125

staging: android: ion: check for kref overflow

This patch is against 4.9. It does not apply to master due to a large
rework of ion in 4.12 which removed the affected functions altogther.
4c23cbff073f3b9b ("staging: android: ion: Remove import interface")

Userspace can cause the kref to handles to increment
arbitrarily high. Ensure it does not overflow.

Signed-off-by: Daniel Rosenberg <drosen@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cdrom: Fix info leak/OOB read in cdrom_ioctl_drive_status

commit 8f3fafc9c2f0ece10832c25f7ffcb07c97a32ad4 upstream.

Like d88b6d04: "cdrom: information leak in cdrom_ioctl_media_changed()"

There is another cast from unsigned long to int which causes
a bounds check to fail with specially crafted input. The value is
then used as an index in the slot array in cdrom_slot_status().

Signed-off-by: Scott Bauer <scott.bauer@intel.com>
Signed-off-by: Scott Bauer <sbauer@plzdonthack.me>
Cc: stable@vger.kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

power: generic-adc-battery: check for duplicate properties copied from iio channels

commit a427503edaaed9b75ed9746a654cece7e93e60a8 upstream.

If an iio channel defines a basic property, there are duplicate entries
in /sys/class/power/*/uevent.

So add a check to avoid duplicates. Since all channels may be duplicates,
we have to modify the related error check.

Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Cc: stable@vger.kernel.org
Fixes: e60fea794e6e ("power: battery: Generic battery driver using IIO")
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

power: generic-adc-battery: fix out-of-bounds write when copying channel properties

commit 932d47448c3caa0fa99e84d7f5bc302aa286efd8 upstream.

We did have sporadic problems in the pinctrl framework during boot
where a pin group name unexpectedly became NULL leading to a NULL
dereference in strcmp.

Detailled analysis of the failing cases did reveal that there were
two devm allocated objects close to each other. The second one was
the affected group_desc in pinmux and the first one was the
psy_desc->properties buffer of the gab driver.

Review of the gab code showed that the address calculation for
one memcpy() is wrong. It does

properties + sizeof(type) * index

but C is defined to do the index multiplication already for
pointer + integer additions. Hence the factor was applied twice
and the memcpy() does write outside of the properties buffer.
Sometimes it happened to be the pinctrl and triggered the strcmp(NULL).

Anyways, it is overkill to use a memcpy() here instead of a simple
assignment, which is easier to read and has less risk for wrong
address calculations. So we change code to a simple assignment.

If we initialize the index to the first free location, we can even
remove the local variable 'properties'.

This bug seems to exist right from the beginning in 3.7-rc1 in

commit e60fea794e6e ("power: battery: Generic battery driver using IIO")

Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Cc: stable@vger.kernel.org
Fixes: e60fea794e6e ("power: battery: Generic battery driver using IIO")
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PM / clk: signedness bug in of_pm_clk_add_clks()

commit 5e2e2f9f76e157063a656351728703cb02b068f1 upstream.

"count" needs to be signed for the error handling to work.  I made "i"
signed as well so they match.

Fixes: 02113ba93ea4 (PM / clk: Add support for obtaining clocks from device-tree)
Cc: 4.6+ <stable@vger.kernel.org> # 4.6+
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

clk: rockchip: fix clk_i2sout parent selection bits on rk3399

commit a64ad008980c65d38e6cf6858429c78e6b740c41 upstream.

Register, shift and mask were wrong according to datasheet.

Fixes: 115510053e5e ("clk: rockchip: add clock controller for the RK3399")
Cc: stable@vger.kernel.org
Signed-off-by: Alberto Panizzo <alberto@amarulasolutions.com>
Signed-off-by: Anthony Brandon <anthony@amarulasolutions.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iscsi target: fix session creation failure handling

commit 26abc916a898d34c5ad159315a2f683def3c5555 upstream.

The problem is that iscsi_login_zero_tsih_s1 sets conn->sess early in
iscsi_login_set_conn_values. If the function fails later like when we
alloc the idr it does kfree(sess) and leaves the conn->sess pointer set.
iscsi_login_zero_tsih_s1 then returns -Exyz and we then call
iscsi_target_login_sess_out and access the freed memory.

This patch has iscsi_login_zero_tsih_s1 either completely setup the
session or completely tear it down, so later in
iscsi_target_login_sess_out we can just check for it being set to the
connection.

Cc: stable@vger.kernel.org
Fixes: 0957627a9960 ("iscsi-target: Fix sess allocation leak in...")
Signed-off-by: Mike Christie <mchristi@redhat.com>
Acked-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: core: Avoid that SCSI device removal through sysfs triggers a deadlock

commit 0ee223b2e1f67cb2de9c0e3247c510d846e74d63 upstream.

A long time ago the unfortunate decision was taken to add a self-deletion
attribute to the sysfs SCSI device directory. That decision was unfortunate
because self-deletion is really tricky. We can't drop that attribute
because widely used user space software depends on it, namely the
rescan-scsi-bus.sh script. Hence this patch that avoids that writing into
that attribute triggers a deadlock. See also commit 7973cbd9fbd9 ("[PATCH]
add sysfs attributes to scan and delete scsi_devices").

This patch avoids that self-removal triggers the following deadlock:

======================================================
WARNING: possible circular locking dependency detected
4.18.0-rc2-dbg+ #5 Not tainted
------------------------------------------------------
modprobe/6539 is trying to acquire lock:
000000008323c4cd (kn->count#202){++++}, at: kernfs_remove_by_name_ns+0x45/0x90

but task is already holding lock:
00000000a6ec2c69 (&shost->scan_mutex){+.+.}, at: scsi_remove_host+0x21/0x150 [scsi_mod]

which lock already depends on the new lock.

the existing dependency chain (in reverse order) is:

-> #1 (&shost->scan_mutex){+.+.}:
       __mutex_lock+0xfe/0xc70
       mutex_lock_nested+0x1b/0x20
       scsi_remove_device+0x26/0x40 [scsi_mod]
       sdev_store_delete+0x27/0x30 [scsi_mod]
       dev_attr_store+0x3e/0x50
       sysfs_kf_write+0x87/0xa0
       kernfs_fop_write+0x190/0x230
       __vfs_write+0xd2/0x3b0
       vfs_write+0x101/0x270
       ksys_write+0xab/0x120
       __x64_sys_write+0x43/0x50
       do_syscall_64+0x77/0x230
       entry_SYSCALL_64_after_hwframe+0x49/0xbe

-> #0 (kn->count#202){++++}:
       lock_acquire+0xd2/0x260
       __kernfs_remove+0x424/0x4a0
       kernfs_remove_by_name_ns+0x45/0x90
       remove_files.isra.1+0x3a/0x90
       sysfs_remove_group+0x5c/0xc0
       sysfs_remove_groups+0x39/0x60
       device_remove_attrs+0x82/0xb0
       device_del+0x251/0x580
       __scsi_remove_device+0x19f/0x1d0 [scsi_mod]
       scsi_forget_host+0x37/0xb0 [scsi_mod]
       scsi_remove_host+0x9b/0x150 [scsi_mod]
       sdebug_driver_remove+0x4b/0x150 [scsi_debug]
       device_release_driver_internal+0x241/0x360
       device_release_driver+0x12/0x20
       bus_remove_device+0x1bc/0x290
       device_del+0x259/0x580
       device_unregister+0x1a/0x70
       sdebug_remove_adapter+0x8b/0xf0 [scsi_debug]
       scsi_debug_exit+0x76/0xe8 [scsi_debug]
       __x64_sys_delete_module+0x1c1/0x280
       do_syscall_64+0x77/0x230
       entry_SYSCALL_64_after_hwframe+0x49/0xbe

other info that might help us debug this:

 Possible unsafe locking scenario:

       CPU0                    CPU1
       ----                    ----
  lock(&shost->scan_mutex);
                               lock(kn->count#202);
                               lock(&shost->scan_mutex);
  lock(kn->count#202);

 *** DEADLOCK ***

2 locks held by modprobe/6539:
 #0: 00000000efaf9298 (&dev->mutex){....}, at: device_release_driver_internal+0x68/0x360
 #1: 00000000a6ec2c69 (&shost->scan_mutex){+.+.}, at: scsi_remove_host+0x21/0x150 [scsi_mod]

stack backtrace:
CPU: 10 PID: 6539 Comm: modprobe Not tainted 4.18.0-rc2-dbg+ #5
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.0.0-prebuilt.qemu-project.org 04/01/2014
Call Trace:
 dump_stack+0xa4/0xf5
 print_circular_bug.isra.34+0x213/0x221
 __lock_acquire+0x1a7e/0x1b50
 lock_acquire+0xd2/0x260
 __kernfs_remove+0x424/0x4a0
 kernfs_remove_by_name_ns+0x45/0x90
 remove_files.isra.1+0x3a/0x90
 sysfs_remove_group+0x5c/0xc0
 sysfs_remove_groups+0x39/0x60
 device_remove_attrs+0x82/0xb0
 device_del+0x251/0x580
 __scsi_remove_device+0x19f/0x1d0 [scsi_mod]
 scsi_forget_host+0x37/0xb0 [scsi_mod]
 scsi_remove_host+0x9b/0x150 [scsi_mod]
 sdebug_driver_remove+0x4b/0x150 [scsi_debug]
 device_release_driver_internal+0x241/0x360
 device_release_driver+0x12/0x20
 bus_remove_device+0x1bc/0x290
 device_del+0x259/0x580
 device_unregister+0x1a/0x70
 sdebug_remove_adapter+0x8b/0xf0 [scsi_debug]
 scsi_debug_exit+0x76/0xe8 [scsi_debug]
 __x64_sys_delete_module+0x1c1/0x280
 do_syscall_64+0x77/0x230
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

See also https://www.mail-archive.com/linux-scsi@vger.kernel.org/msg54525.html.

Fixes: ac0ece9174ac ("scsi: use device_remove_file_self() instead of device_schedule_callback()")
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Tejun Heo <tj@kernel.org>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: sysfs: Introduce sysfs_{un,}break_active_protection()

commit 2afc9166f79b8f6da5f347f48515215ceee4ae37 upstream.

Introduce these two functions and export them such that the next patch
can add calls to these functions from the SCSI core.

Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Acked-by: Tejun Heo <tj@kernel.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

MIPS: lib: Provide MIPS64r6 __multi3() for GCC < 7

commit 690d9163bf4b8563a2682e619f938e6a0443947f upstream.

Some versions of GCC suboptimally generate calls to the __multi3()
intrinsic for MIPS64r6 builds, resulting in link failures due to the
missing function:

    LD      vmlinux.o
    MODPOST vmlinux.o
  kernel/bpf/verifier.o: In function `kmalloc_array':
  include/linux/slab.h:631: undefined reference to `__multi3'
  fs/select.o: In function `kmalloc_array':
  include/linux/slab.h:631: undefined reference to `__multi3'
  ...

We already have a workaround for this in which we provide the
instrinsic, but we do so selectively for GCC 7 only. Unfortunately the
issue occurs with older GCC versions too - it has been observed with
both GCC 5.4.0 & GCC 6.4.0.

MIPSr6 support was introduced in GCC 5, so all major GCC versions prior
to GCC 8 are affected and we extend our workaround accordingly to all
MIPS64r6 builds using GCC versions older than GCC 8.

Signed-off-by: Paul Burton <paul.burton@mips.com>
Reported-by: Vladimir Kondratiev <vladimir.kondratiev@intel.com>
Fixes: ebabcf17bcd7 ("MIPS: Implement __multi3 for GCC7 MIPS64r6 builds")
Patchwork: https://patchwork.linux-mips.org/patch/20297/
Cc: James Hogan <jhogan@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: stable@vger.kernel.org # 4.15+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

MIPS: Correct the 64-bit DSP accumulator register size

commit f5958b4cf4fc38ed4583ab83fb7c4cd1ab05f47b upstream.

Use the `unsigned long' rather than `__u32' type for DSP accumulator
registers, like with the regular MIPS multiply/divide accumulator and
general-purpose registers, as all are 64-bit in 64-bit implementations
and using a 32-bit data type leads to contents truncation on context
saving.

Update `arch_ptrace' and `compat_arch_ptrace' accordingly, removing
casts that are similarly not used with multiply/divide accumulator or
general-purpose register accesses.

Signed-off-by: Maciej W. Rozycki <macro@mips.com>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Fixes: e50c0a8fa60d ("Support the MIPS32 / MIPS64 DSP ASE.")
Patchwork: https://patchwork.linux-mips.org/patch/19329/
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: James Hogan <jhogan@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-fsdevel@vger.kernel.org
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Cc: stable@vger.kernel.org # 2.6.15+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

kprobes: Make list and blacklist root user read only

commit f2a3ab36077222437b4826fc76111caa14562b7c upstream.

Since the blacklist and list files on debugfs indicates
a sensitive address information to reader, it should be
restricted to the root user.

Suggested-by: Thomas Richter <tmricht@linux.ibm.com>
Suggested-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: David Howells <dhowells@redhat.com>
Cc: David S . Miller <davem@davemloft.net>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Jon Medhurst <tixy@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tobin C . Harding <me@tobin.cc>
Cc: Will Deacon <will.deacon@arm.com>
Cc: acme@kernel.org
Cc: akpm@linux-foundation.org
Cc: brueckner@linux.vnet.ibm.com
Cc: linux-arch@vger.kernel.org
Cc: rostedt@goodmis.org
Cc: schwidefsky@de.ibm.com
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/lkml/152491890171.9916.5183693615601334087.stgit@devbox
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

s390/pci: fix out of bounds access during irq setup

commit 866f3576a72b2233a76dffb80290f8086dc49e17 upstream.

During interrupt setup we allocate interrupt vectors, walk the list of msi
descriptors, and fill in the message data. Requesting more interrupts than
supported on s390 can lead to an out of bounds access.

When we restrict the number of interrupts we should also stop walking the
msi list after all supported interrupts are handled.

Cc: stable@vger.kernel.org
Signed-off-by: Sebastian Ott <sebott@linux.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

s390/numa: move initial setup of node_to_cpumask_map

commit fb7d7518b0d65955f91c7b875c36eae7694c69bd upstream.

The numa_init_early initcall sets the node_to_cpumask_map[0] to the
full cpu_possible_mask. Unfortunately this early_initcall is too late,
the NUMA setup for numa=emu is done even earlier. The order of calls
is numa_setup() -> emu_update_cpu_topology(), then the early_initcalls(),
followed by sched_init_domains().

Starting with git commit 051f3ca02e46432c0965e8948f00c07d8a2f09c0
"sched/topology: Introduce NUMA identity node sched domain"
the incorrect node_to_cpumask_map[0] really screws up the domain
setup and the kernel panics with the follow oops:

Cc: <stable@vger.kernel.org> # v4.15+
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

s390/qdio: reset old sbal_state flags

commit 64e03ff72623b8c2ea89ca3cb660094e019ed4ae upstream.

When allocating a new AOB fails, handle_outbound() is still capable of
transmitting the selected buffer (just without async completion).

But if a previous transfer on this queue slot used async completion, its
sbal_state flags field is still set to QDIO_OUTBUF_STATE_FLAG_PENDING.
So when the upper layer driver sees this stale flag, it expects an async
completion that never happens.

Fix this by unconditionally clearing the flags field.

Fixes: 104ea556ee7f ("qdio: support asynchronous delivery of storage blocks")
Cc: <stable@vger.kernel.org> #v3.2+
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

s390: fix br_r1_trampoline for machines without exrl

commit 26f843848bae973817b3587780ce6b7b0200d3e4 upstream.

For machines without the exrl instruction the BFP jit generates
code that uses an "br %r1" instruction located in the lowcore page.
Unfortunately there is a cut & paste error that puts an additional
"larl %r1,.+14" instruction in the code that clobbers the branch
target address in %r1. Remove the larl instruction.

Cc: <stable@vger.kernel.org> # v4.17+
Fixes: de5cb6eb51 ("s390: use expoline thunks in the BPF JIT")
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/entry/64: Wipe KASAN stack shadow before rewind_stack_do_exit()

commit f12d11c5c184626b4befdee3d573ec8237405a33 upstream.

Reset the KASAN shadow state of the task stack before rewinding RSP.
Without this, a kernel oops will leave parts of the stack poisoned, and
code running under do_exit() can trip over such poisoned regions and cause
nonsensical false-positive KASAN reports about stack-out-of-bounds bugs.

This does not wipe the exception stacks; if an oops happens on an exception
stack, it might result in random KASAN false-positives from other tasks
afterwards. This is probably relatively uninteresting, since if the kernel
oopses on an exception stack, there are most likely bigger things to worry
about. It'd be more interesting if vmapped stacks and KASAN were
compatible, since then handle_stack_overflow() would oops from exception
stack context.

Fixes: 2deb4be28077 ("x86/dumpstack: When OOPSing, rewind the stack before do_exit()")
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: kasan-dev@googlegroups.com
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20180828184033.93712-1-jannh@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/speculation/l1tf: Increase l1tf memory limit for Nehalem+

commit cc51e5428ea54f575d49cfcede1d4cb3a72b4ec4 upstream.

On Nehalem and newer core CPUs the CPU cache internally uses 44 bits
physical address space. The L1TF workaround is limited by this internal
cache address width, and needs to have one bit free there for the
mitigation to work.

Older client systems report only 36bit physical address space so the range
check decides that L1TF is not mitigated for a 36bit phys/32GB system with
some memory holes.

But since these actually have the larger internal cache width this warning
is bogus because it would only really be needed if the system had more than
43bits of memory.

Add a new internal x86_cache_bits field. Normally it is the same as the
physical bits field reported by CPUID, but for Nehalem and newerforce it to
be at least 44bits.

Change the L1TF memory size warning to use the new cache_bits field to
avoid bogus warnings and remove the bogus comment about memory size.

Fixes: 17dbca119312 ("x86/speculation/l1tf: Add sysfs reporting for l1tf")
Reported-by: George Anchev <studio@anchev.net>
Reported-by: Christopher Snowhill <kode54@gmail.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: x86@kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: Michael Hocko <mhocko@suse.com>
Cc: vbabka@suse.cz
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20180824170351.34874-1-andi@firstfloor.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/spectre: Add missing family 6 check to microcode check

commit 1ab534e85c93945f7862378d8c8adcf408205b19 upstream.

The check for Spectre microcodes does not check for family 6, only the
model numbers.

Add a family 6 check to avoid ambiguity with other families.

Fixes: a5b296636453 ("x86/cpufeature: Blacklist SPEC_CTRL/PRED_CMD on early Spectre v2 microcodes")
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: x86@kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20180824170351.34874-2-andi@firstfloor.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/irqflags: Mark native_restore_fl extern inline

commit 1f59a4581b5ecfe9b4f049a7a2cf904d8352842d upstream.

This should have been marked extern inline in order to pick up the out
of line definition in arch/x86/kernel/irqflags.S.

Fixes: 208cbb325589 ("x86/irqflags: Provide a declaration for native_save_fl")
Reported-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Juergen Gross <jgross@suse.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20180827214011.55428-1-ndesaulniers@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

pinctrl: freescale: off by one in imx1_pinconf_group_dbg_show()

commit 19da44cd33a3a6ff7c97fff0189999ff15b241e4 upstream.

The info->groups[] array is allocated in imx1_pinctrl_parse_dt().  It
has info->ngroups elements.  Thus the > here should be >= to prevent
reading one element beyond the end of the array.

Cc: stable@vger.kernel.org
Fixes: 30612cd90005 ("pinctrl: imx1 core driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Uwe Kleine-König <u.kleine-könig@pengutronix.de>
Acked-by: Dong Aisheng <Aisheng.dong@nxp.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: sirf: Fix potential NULL pointer dereference

commit ae1c696a480c67c45fb23b35162183f72c6be0e1 upstream.

There is a potential execution path in which function
platform_get_resource() returns NULL. If this happens,
we will end up having a NULL pointer dereference.

Fix this by replacing devm_ioremap with devm_ioremap_resource,
which has the NULL check and the memory region request.

This code was detected with the help of Coccinelle.

Cc: stable@vger.kernel.org
Fixes: 2bd8d1d5cf89 ("ASoC: sirf: Add audio usp interface driver")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: dpcm: don't merge format from invalid codec dai

commit 4febced15ac8ddb9cf3e603edb111842e4863d9a upstream.

When merging codec formats, dpcm_runtime_base_format() should skip
the codecs which are not supporting the current stream direction.

At the moment, if a BE link has more than one codec, and only one
of these codecs has no capture DAI, it becomes impossible to start
a capture stream because the merged format would be 0.

Skipping invalid codec DAI solves the problem.

Fixes: b073ed4e2126 ("ASoC: soc-pcm: DPCM cares BE format")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

b43/leds: Ensure NUL-termination of LED name string

commit 2aa650d1950fce94f696ebd7db30b8830c2c946f upstream.

strncpy might not NUL-terminate the string, if the name equals the buffer size.
Use strlcpy instead.

Signed-off-by: Michael Buesch <m@bues.ch>
Cc: stable@vger.kernel.org
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

b43legacy/leds: Ensure NUL-termination of LED name string

commit 4d77a89e3924b12f4a5628b21237e57ab4703866 upstream.

strncpy might not NUL-terminate the string, if the name equals the buffer size.
Use strlcpy instead.

Signed-off-by: Michael Buesch <m@bues.ch>
Cc: stable@vger.kernel.org
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

udl-kms: fix crash due to uninitialized memory

commit 09a00abe3a9941c2715ca83eb88172cd2f54d8fd upstream.

We must use kzalloc when allocating the fb_deferred_io structure.
Otherwise, the field first_io is undefined and it causes a crash.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

udl-kms: handle allocation failure

commit 542bb9788a1f485eb1a2229178f665d8ea166156 upstream.

Allocations larger than PAGE_ALLOC_COSTLY_ORDER are unreliable and they
may fail anytime. This patch fixes the udl kms driver so that when a large
alloactions fails, it tries to do multiple smaller allocations.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

udl-kms: change down_interruptible to down

commit 8456b99c16d193c4c3b7df305cf431e027f0189c upstream.

If we leave urbs around, it causes not only leak, but also memory
corruption. This patch fixes the function udl_free_urb_list, so that it
always waits for all urbs that are in progress.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fuse: Add missed unlock_page() to fuse_readpages_fill()

commit 109728ccc5933151c68d1106e4065478a487a323 upstream.

The above error path returns with page unlocked, so this place seems also
to behave the same.

Fixes: f8dbdf81821b ("fuse: rework fuse_readpages()")
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fuse: Fix oops at process_init_reply()

commit e8f3bd773d22f488724dffb886a1618da85c2966 upstream.

syzbot is hitting NULL pointer dereference at process_init_reply().
This is because deactivate_locked_super() is called before response for
initial request is processed.

Fix this by aborting and waiting for all requests (including FUSE_INIT)
before resetting fc->sb.

Original patch by Tetsuo Handa <penguin-kernel@I-love.SKAURA.ne.jp>.

Reported-by: syzbot <syzbot+b62f08f4d5857755e3bc@syzkaller.appspotmail.com>
Fixes: e27c9d3877a0 ("fuse: fuse: add time_gran to INIT_OUT")
Cc: <stable@vger.kernel.org> # v3.19
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fuse: umount should wait for all requests

commit b8f95e5d13f5f0191dcb4b9113113d241636e7cb upstream.

fuse_abort_conn() does not guarantee that all async requests have actually
finished aborting (i.e. their ->end() function is called).  This could
actually result in still used inodes after umount.

Add a helper to wait until all requests are fully done.  This is done by
looking at the "num_waiting" counter.  When this counter drops to zero, we
can be sure that no more requests are outstanding.

Fixes: 0d8e84b0432b ("fuse: simplify request abort")
Cc: <stable@vger.kernel.org> # v4.2
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fuse: fix unlocked access to processing queue

commit 45ff350bbd9d0f0977ff270a0d427c71520c0c37 upstream.

fuse_dev_release() assumes that it's the only one referencing the
fpq->processing list, but that's not true, since fuse_abort_conn() can be
doing the same without any serialization between the two.

Fixes: c3696046beb3 ("fuse: separate pqueue for clones")
Cc: <stable@vger.kernel.org> # v4.2
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fuse: fix double request_end()

commit 87114373ea507895a62afb10d2910bd9adac35a8 upstream.

Refcounting of request is broken when fuse_abort_conn() is called and
request is on the fpq->io list:

 - ref is taken too late
 - then it is not dropped

Fixes: 0d8e84b0432b ("fuse: simplify request abort")
Cc: <stable@vger.kernel.org> # v4.2
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fuse: fix initial parallel dirops

commit 63576c13bd17848376c8ba4a98f5d5151140c4ac upstream.

If parallel dirops are enabled in FUSE_INIT reply, then first operation may
leave fi->mutex held.

Reported-by: syzbot <syzbot+3f7b29af1baa9d0a55be@syzkaller.appspotmail.com>
Fixes: 5c672ab3f0ee ("fuse: serialize dirops by default")
Cc: <stable@vger.kernel.org> # v4.7
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fuse: Don't access pipe->buffers without pipe_lock()

commit a2477b0e67c52f4364a47c3ad70902bc2a61bd4c upstream.

fuse_dev_splice_write() reads pipe->buffers to determine the size of
'bufs' array before taking the pipe_lock(). This is not safe as
another thread might change the 'pipe->buffers' between the allocation
and taking the pipe_lock(). So we end up with too small 'bufs' array.

Move the bufs allocations inside pipe_lock()/pipe_unlock() to fix this.

Fixes: dd3bb14f44a6 ("fuse: support splice() writing to fuse device")
Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: <stable@vger.kernel.org> # v2.6.35
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/kvm/vmx: Remove duplicate l1d flush definitions

commit 94d7a86c21a3d6046bf4616272313cb7d525075a upstream.

These are already defined higher up in the file.

Fixes: 7db92e165ac8 ("x86/kvm: Move l1tf setup function")
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/d7ca03ae210d07173452aeed85ffe344301219a5.1534253536.git.jpoimboe@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: x86: SVM: Call x86_spec_ctrl_set_guest/host() with interrupts disabled

commit 024d83cadc6b2af027e473720f3c3da97496c318 upstream.

Mikhail reported the following lockdep splat:

WARNING: possible irq lock inversion dependency detected
CPU 0/KVM/10284 just changed the state of lock:
  000000000d538a88 (&st->lock){+...}, at:
  speculative_store_bypass_update+0x10b/0x170

but this lock was taken by another, HARDIRQ-safe lock
in the past:

(&(&sighand->siglock)->rlock){-.-.}

   and interrupts could create inverse lock ordering between them.

Possible interrupt unsafe locking scenario:

    CPU0                    CPU1
    ----                    ----
   lock(&st->lock);
                           local_irq_disable();
                           lock(&(&sighand->siglock)->rlock);
                           lock(&st->lock);
    <Interrupt>
     lock(&(&sighand->siglock)->rlock);
     *** DEADLOCK ***

The code path which connects those locks is:

   speculative_store_bypass_update()
   ssb_prctl_set()
   do_seccomp()
   do_syscall_64()

In svm_vcpu_run() speculative_store_bypass_update() is called with
interupts enabled via x86_virt_spec_ctrl_set_guest/host().

This is actually a false positive, because GIF=0 so interrupts are
disabled even if IF=1; however, we can easily move the invocations of
x86_virt_spec_ctrl_set_guest/host() into the interrupt disabled region to
cure it, and it's a good idea to keep the GIF=0/IF=1 area as small
and self-contained as possible.

Fixes: 1f50ddb4f418 ("x86/speculation: Handle HT correctly on AMD")
Reported-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Borislav Petkov <bp@suse.de>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: kvm@vger.kernel.org
Cc: x86@kernel.org
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/process: Re-export start_thread()

commit dc76803e57cc86589c4efcb5362918f9b0c0436f upstream.

The consolidation of the start_thread() functions removed the export
unintentionally. This breaks binfmt handlers built as a module.

Add it back.

Fixes: e634d8fc792c ("x86-64: merge the standard and compat start_thread() functions")
Signed-off-by: Rian Hunter <rian@alum.mit.edu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bpetkov@suse.de>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: Joerg Roedel <jroedel@suse.de>
Cc: Dmitry Safonov <dima@arista.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20180819230854.7275-1-rian@alum.mit.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/speculation/l1tf: Suggest what to do on systems with too much RAM

commit 6a012288d6906fee1dbc244050ade1dafe4a9c8d upstream.

Two users have reported [1] that they have an "extremely unlikely" system
with more than MAX_PA/2 memory and L1TF mitigation is not effective.

Make the warning more helpful by suggesting the proper mem=X kernel boot
parameter to make it effective and a link to the L1TF document to help
decide if the mitigation is worth the unusable RAM.

[1] https://bugzilla.suse.com/show_bug.cgi?id=1105536

Suggested-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: "H . Peter Anvin" <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/966571f0-9d7f-43dc-92c6-a10eec7a1254@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/speculation/l1tf: Fix off-by-one error when warning that system has too much RAM

commit b0a182f875689647b014bc01d36b340217792852 upstream.

Two users have reported [1] that they have an "extremely unlikely" system
with more than MAX_PA/2 memory and L1TF mitigation is not effective. In
fact it's a CPU with 36bits phys limit (64GB) and 32GB memory, but due to
holes in the e820 map, the main region is almost 500MB over the 32GB limit:

[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000081effffff] usable

Suggestions to use 'mem=32G' to enable the L1TF mitigation while losing the
500MB revealed, that there's an off-by-one error in the check in
l1tf_select_mitigation().

l1tf_pfn_limit() returns the last usable pfn (inclusive) and the range
check in the mitigation path does not take this into account.

Instead of amending the range check, make l1tf_pfn_limit() return the first
PFN which is over the limit which is less error prone. Adjust the other
users accordingly.

[1] https://bugzilla.suse.com/show_bug.cgi?id=1105536

Fixes: 17dbca119312 ("x86/speculation/l1tf: Add sysfs reporting for l1tf")
Reported-by: George Anchev <studio@anchev.net>
Reported-by: Christopher Snowhill <kode54@gmail.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: "H . Peter Anvin" <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20180823134418.17008-1-vbabka@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/speculation/l1tf: Fix overflow in l1tf_pfn_limit() on 32bit

commit 9df9516940a61d29aedf4d91b483ca6597e7d480 upstream.

On 32bit PAE kernels on 64bit hardware with enough physical bits,
l1tf_pfn_limit() will overflow unsigned long. This in turn affects
max_swapfile_size() and can lead to swapon returning -EINVAL. This has been
observed in a 32bit guest with 42 bits physical address size, where
max_swapfile_size() overflows exactly to 1 << 32, thus zero, and produces
the following warning to dmesg:

[    6.396845] Truncating oversized swap area, only using 0k out of 2047996k

Fix this by using unsigned long long instead.

Fixes: 17dbca119312 ("x86/speculation/l1tf: Add sysfs reporting for l1tf")
Fixes: 377eeaa8e11f ("x86/speculation/l1tf: Limit swap file size to MAX_PA/2")
Reported-by: Dominique Leuenberger <dimstar@suse.de>
Reported-by: Adrian Schroeter <adrian@suse.de>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: "H . Peter Anvin" <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20180820095835.5298-1-vbabka@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sparc: kernel/pcic: silence gcc 7.x warning in pcibios_fixup_bus()

commit 2dc77533f1e495788d73ffa4bee4323b2646d2bb upstream.

When building the kernel for Sparc using gcc 7.x, the build fails
with:

arch/sparc/kernel/pcic.c: In function ‘pcibios_fixup_bus’:
arch/sparc/kernel/pcic.c:647:8: error: ‘cmd’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
    cmd |= PCI_COMMAND_IO;
        ^~

The simplified code looks like this:

unsigned int cmd;
[...]
pcic_read_config(dev->bus, dev->devfn, PCI_COMMAND, 2, &cmd);
[...]
cmd |= PCI_COMMAND_IO;

I.e, the code assumes that pcic_read_config() will always initialize
cmd. But it's not the case. Looking at pcic_read_config(), if
bus->number is != 0 or if the size is not one of 1, 2 or 4, *val will
not be initialized.

As a simple fix, we initialize cmd to zero at the beginning of
pcibios_fixup_bus.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Cc: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: arm/arm64: Skip updating PMD entry if no change

commit 86658b819cd0a9aa584cd84453ed268a6f013770 upstream.

Contention on updating a PMD entry by a large number of vcpus can lead
to duplicate work when handling stage 2 page faults. As the page table
update follows the break-before-make requirement of the architecture,
it can lead to repeated refaults due to clearing the entry and
flushing the tlbs.

This problem is more likely when -

* there are large number of vcpus
* the mapping is large block mapping

such as when using PMD hugepages (512MB) with 64k pages.

Fix this by skipping the page table update if there is no change in
the entry being updated.

Cc: stable@vger.kernel.org
Fixes: ad361f093c1e ("KVM: ARM: Support hugetlbfs backed huge pages")
Reviewed-by: Suzuki Poulose <suzuki.poulose@arm.com>
Acked-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Punit Agrawal <punit.agrawal@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: arm/arm64: Skip updating PTE entry if no change

commit 976d34e2dab10ece5ea8fe7090b7692913f89084 upstream.

When there is contention on faulting in a particular page table entry
at stage 2, the break-before-make requirement of the architecture can
lead to additional refaulting due to TLB invalidation.

Avoid this by skipping a page table update if the new value of the PTE
matches the previous value.

Cc: stable@vger.kernel.org
Fixes: d5d8184d35c9 ("KVM: ARM: Memory virtualization setup")
Reviewed-by: Suzuki Poulose <suzuki.poulose@arm.com>
Acked-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Punit Agrawal <punit.agrawal@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: android: ion: fix ION_IOC_{MAP,SHARE} use-after-free

This patch is 4.9.y only.  Kernels 4.12 and later are unaffected, since
all the underlying ion_handle infrastructure has been ripped out.

The ION_IOC_{MAP,SHARE} ioctls drop and reacquire client->lock several
times while operating on one of the client's ion_handles.  This creates
windows where userspace can call ION_IOC_FREE on the same client with
the same handle, and effectively make the kernel drop its own reference.
For example:

- thread A: ION_IOC_ALLOC creates an ion_handle with refcount 1
- thread A: starts ION_IOC_MAP and increments the refcount to 2
- thread B: ION_IOC_FREE decrements the refcount to 1
- thread B: ION_IOC_FREE decrements the refcount to 0 and frees the
            handle
- thread A: continues ION_IOC_MAP with a dangling ion_handle * to
            freed memory

Fix this by holding client->lock for the duration of
ION_IOC_{MAP,SHARE}, preventing the concurrent ION_IOC_FREE.  Also
remove ion_handle_get_by_id(), since there's literally no way to use it
safely.

Cc: stable@vger.kernel.org # v4.11-
Signed-off-by: Greg Hackmann <ghackmann@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: reset error code in ext4_find_entry in fallback

commit f39b3f45dbcb0343822cce31ea7636ad66e60bc2 upstream.

When ext4_find_entry() falls back to "searching the old fashioned
way" due to a corrupt dx dir, it needs to reset the error code
to NULL so that the nonstandard ERR_BAD_DX_DIR code isn't returned
to userspace.

https://bugzilla.kernel.org/show_bug.cgi?id=199947

Reported-by: Anatoly Trosinenko <anatoly.trosinenko@yandex.com>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: sysfs: print ext4_super_block fields as little-endian

commit a4d2aadca184ece182418950d45ba4ffc7b652d2 upstream.

While working on extended rand for last_error/first_error timestamps,
I noticed that the endianess is wrong; we access the little-endian
fields in struct ext4_super_block as native-endian when we print them.

This adds a special case in ext4_attr_show() and ext4_attr_store()
to byteswap the superblock fields if needed.

In older kernels, this code was part of super.c, it got moved to
sysfs.c in linux-4.4.

Cc: stable@vger.kernel.org
Fixes: 52c198c6820f ("ext4: add sysfs entry showing whether the fs contains errors")
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: check for NUL characters in extended attribute's name

commit 7d95178c77014dbd8dce36ee40bbbc5e6c121ff5 upstream.

Extended attribute names are defined to be NUL-terminated, so the name
must not contain a NUL character.  This is important because there are
places when remove extended attribute, the code uses strlen to
determine the length of the entry.  That should probably be fixed at
some point, but code is currently really messy, so the simplest fix
for now is to simply validate that the extended attributes are sane.

https://bugzilla.kernel.org/show_bug.cgi?id=200401

Reported-by: Wen Xu <wen.xu@gatech.edu>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

s390/kvm: fix deadlock when killed by oom

commit 306d6c49ac9ded11114cb53b0925da52f2c2ada1 upstream.

When the oom killer kills a userspace process in the page fault handler
while in guest context, the fault handler fails to release the mm_sem
if the FAULT_FLAG_RETRY_NOWAIT option is set. This leads to a deadlock
when tearing down the mm when the process terminates. This bug can only
happen when pfault is enabled, so only KVM clients are affected.

The problem arises in the rare cases in which handle_mm_fault does not
release the mm_sem. This patch fixes the issue by manually releasing
the mm_sem when needed.

Fixes: 24eb3a824c4f3 ("KVM: s390: Add FAULT_FLAG_RETRY_NOWAIT for guest fault")
Cc: <stable@vger.kernel.org> # 3.15+
Signed-off-by: Claudio Imbrenda <imbrenda@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: mm: check for upper PAGE_SHIFT bits in pfn_valid()

commit 5ad356eabc47d26a92140a0c4b20eba471c10de3 upstream.

ARM64's pfn_valid() shifts away the upper PAGE_SHIFT bits of the input
before seeing if the PFN is valid.  This leads to false positives when
some of the upper bits are set, but the lower bits match a valid PFN.

For example, the following userspace code looks up a bogus entry in
/proc/kpageflags:

    int pagemap = open("/proc/self/pagemap", O_RDONLY);
    int pageflags = open("/proc/kpageflags", O_RDONLY);
    uint64_t pfn, val;

    lseek64(pagemap, [...], SEEK_SET);
    read(pagemap, &pfn, sizeof(pfn));
    if (pfn & (1UL << 63)) {        /* valid PFN */
        pfn &= ((1UL << 55) - 1);   /* clear flag bits */
        pfn |= (1UL << 55);
        lseek64(pageflags, pfn * sizeof(uint64_t), SEEK_SET);
        read(pageflags, &val, sizeof(val));
    }

On ARM64 this causes the userspace process to crash with SIGSEGV rather
than reading (1 << KPF_NOPAGE).  kpageflags_read() treats the offset as
valid, and stable_page_flags() will try to access an address between the
user and kernel address ranges.

Fixes: c1cc1552616d ("arm64: MMU initialisation")
Cc: stable@vger.kernel.org
Signed-off-by: Greg Hackmann <ghackmann@google.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

kprobes/arm64: Fix %p uses in error messages

commit 0722867dcbc28cc9b269b57acd847c7c1aa638d6 upstream.

Fix %p uses in error messages by removing it because
those are redundant or meaningless.

Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Will Deacon <will.deacon@arm.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: David Howells <dhowells@redhat.com>
Cc: David S . Miller <davem@davemloft.net>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Jon Medhurst <tixy@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Tobin C . Harding <me@tobin.cc>
Cc: acme@kernel.org
Cc: akpm@linux-foundation.org
Cc: brueckner@linux.vnet.ibm.com
Cc: linux-arch@vger.kernel.org
Cc: rostedt@goodmis.org
Cc: schwidefsky@de.ibm.com
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/lkml/152491908405.9916.12425053035317241111.stgit@devbox
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

smb3: don't request leases in symlink creation and query

commit 22783155f4bf956c346a81624ec9258930a6fe06 upstream.

Fixes problem pointed out by Pavel in discussions about commit
729c0c9dd55204f0c9a823ac8a7bfa83d36c7e78

Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
CC: Stable <stable@vger.kernel.org> # 3.18.x+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

smb3: Do not send SMB3 SET_INFO if nothing changed

commit fd09b7d3b352105f08b8e02f7afecf7e816380ef upstream.

An earlier commit had a typo which prevented the
optimization from working:

commit 18dd8e1a65dd ("Do not send SMB3 SET_INFO request if nothing is changing")

Thank you to Metze for noticing this.  Also clear a
reserved field in the FILE_BASIC_INFO struct we send
that should be zero (all the other fields in that
struct were set or cleared explicitly already in
cifs_set_file_info).

Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
CC: Stable <stable@vger.kernel.org> # 4.9.x+
Reported-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

smb3: enumerating snapshots was leaving part of the data off end

commit e02789a53d71334b067ad72eee5d4e88a0158083 upstream.

When enumerating snapshots, the last few bytes of the final
snapshot could be left off since we were miscalculating the
length returned (leaving off the sizeof struct SRV_SNAPSHOT_ARRAY)
See MS-SMB2 section 2.2.32.2. In addition fixup the length used
to allow smaller buffer to be passed in, in order to allow
returning the size of the whole snapshot array more easily.

Sample userspace output with a kernel patched with this
(mounted to a Windows volume with two snapshots).
Before this patch, the second snapshot would be missing a
few bytes at the end.

~/cifs-2.6# ~/enum-snapshots /mnt/file
press enter to issue the ioctl to retrieve snapshot information ...

size of snapshot array = 102
Num snapshots: 2 Num returned: 2 Array Size: 102

Snapshot 0:@GMT-2018.06.30-19.34.17
Snapshot 1:@GMT-2018.06.30-19.33.37

CC: Stable <stable@vger.kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cifs: check kmalloc before use

commit 126c97f4d0d1b5b956e8b0740c81a2b2a2ae548c upstream.

The kmalloc was not being checked - if it fails issue a warning
and return -ENOMEM to the caller.

Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Fixes: b8da344b74c8 ("cifs: dynamic allocation of ntlmssp blob")
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
cc: Stable <stable@vger.kernel.org>`
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cifs: add missing debug entries for kconfig options

commit 950132afd59385caf6e2b84e5235d069fa10681d upstream.

/proc/fs/cifs/DebugData displays the features (Kconfig options)
used to build cifs.ko but it was missing some, and needed comma
separator.  These can be useful in debugging certain problems
so we know which optional features were enabled in the user's build.
Also clarify them, by making them more closely match the
corresponding CONFIG_CIFS_* parm.

Old format:
Features: dfs fscache posix spnego xattr acl

New format:
Features: DFS,FSCACHE,SMB_DIRECT,STATS,DEBUG2,ALLOW_INSECURE_LEGACY,CIFS_POSIX,UPCALL(SPNEGO),XATTR,ACL

Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Reviewed-by: Paulo Alcantara <palcantara@suse.de>
CC: Stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mei: don't update offset in write

commit a103af1b64d74853a5e08ca6c86aeb0e5c6ca4f1 upstream.

MEI enables writes of complete messages only
while read can be performed in parts, hence
write should not update the file offset to
not break interleaving partial reads with writes.

Cc: <stable@vger.kernel.org>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Cipso: cipso_v4_optptr enter infinite loop

commit 40413955ee265a5e42f710940ec78f5450d49149 upstream.

in for(),if((optlen > 0) && (optptr[1] == 0)), enter infinite loop.

Test: receive a packet which the ip length > 20 and the first byte of ip option is 0, produce this issue

Signed-off-by: yujuan.qi <yujuan.qi@mediatek.com>
Acked-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sched/sysctl: Check user input value of sysctl_sched_time_avg

commit 5ccba44ba118a5000cccc50076b0344632459779 upstream.

System will hang if user set sysctl_sched_time_avg to 0:

  [root@XXX ~]# sysctl kernel.sched_time_avg_ms=0

  Stack traceback for pid 0
  0xffff883f6406c600 0 0 1 3 R 0xffff883f6406cf50 *swapper/3
  ffff883f7ccc3ae8 0000000000000018 ffffffff810c4dd0 0000000000000000
  0000000000017800 ffff883f7ccc3d78 0000000000000003 ffff883f7ccc3bf8
  ffffffff810c4fc9 ffff883f7ccc3c08 00000000810c5043 ffff883f7ccc3c08
  Call Trace:
  <IRQ> [<ffffffff810c4dd0>] ? update_group_capacity+0x110/0x200
  [<ffffffff810c4fc9>] ? update_sd_lb_stats+0x109/0x600
  [<ffffffff810c5507>] ? find_busiest_group+0x47/0x530
  [<ffffffff810c5b84>] ? load_balance+0x194/0x900
  [<ffffffff810ad5ca>] ? update_rq_clock.part.83+0x1a/0xe0
  [<ffffffff810c6d42>] ? rebalance_domains+0x152/0x290
  [<ffffffff810c6f5c>] ? run_rebalance_domains+0xdc/0x1d0
  [<ffffffff8108a75b>] ? __do_softirq+0xfb/0x320
  [<ffffffff8108ac85>] ? irq_exit+0x125/0x130
  [<ffffffff810b3a17>] ? scheduler_ipi+0x97/0x160
  [<ffffffff81052709>] ? smp_reschedule_interrupt+0x29/0x30
  [<ffffffff8173a1be>] ? reschedule_interrupt+0x6e/0x80
   <EOI> [<ffffffff815bc83c>] ? cpuidle_enter_state+0xcc/0x230
  [<ffffffff815bc80c>] ? cpuidle_enter_state+0x9c/0x230
  [<ffffffff815bc9d7>] ? cpuidle_enter+0x17/0x20
  [<ffffffff810cd6dc>] ? cpu_startup_entry+0x38c/0x420
  [<ffffffff81053373>] ? start_secondary+0x173/0x1e0

Because divide-by-zero error happens in function:

update_group_capacity()
  update_cpu_capacity()
    scale_rt_capacity()
     {
          ...
          total = sched_avg_period() + delta;
          used = div_u64(avg, total);
          ...
     }

To fix this issue, check user input value of sysctl_sched_time_avg, keep
it unchanged when hitting invalid input, and set the minimum limit of
sysctl_sched_time_avg to 1 ms.

Reported-by: James Puthukattukaran <james.puthukattukaran@oracle.com>
Signed-off-by: Ethan Zhao <ethan.zhao@oracle.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: efault@gmx.de
Cc: ethan.kernel@gmail.com
Cc: keescook@chromium.org
Cc: mcgrof@kernel.org
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/1504504774-18253-1-git-send-email-ethan.zhao@oracle.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Steve Muckle <smuckle@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm/memory.c: check return value of ioremap_prot

[ Upstream commit 24eee1e4c47977bdfb71d6f15f6011e7b6188d04 ]

ioremap_prot() can return NULL which could lead to an oops.

Link: http://lkml.kernel.org/r/1533195441-58594-1-git-send-email-chenjie6@huawei.com
Signed-off-by: chen jie <chenjie6@huawei.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Li Zefan <lizefan@huawei.com>
Cc: chenjie <chenjie6@huawei.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: vmw_pvscsi: Return DID_RESET for status SAM_STAT_COMMAND_TERMINATED

[ Upstream commit e95153b64d03c2b6e8d62e51bdcc33fcad6e0856 ]

Commands that are reset are returned with status
SAM_STAT_COMMAND_TERMINATED. PVSCSI currently returns DID_OK |
SAM_STAT_COMMAND_TERMINATED which fails the command. Instead, set hostbyte
to DID_RESET to allow upper layers to retry.

Tested by copying a large file between two pvscsi disks on same adapter
while performing a bus reset at 1-second intervals. Before fix, commands
sometimes fail with DID_OK. After fix, commands observed to fail with
DID_RESET.

Signed-off-by: Jim Gill <jgill@vmware.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: fcoe: clear FC_RP_STARTED flags when receiving a LOGO

[ Upstream commit 1550ec458e0cf1a40a170ab1f4c46e3f52860f65 ]

When receiving a LOGO request we forget to clear the FC_RP_STARTED flag
before starting the rport delete routine.

As the started flag was not cleared, we're not deleting the rport but
waiting for a restart and thus are keeping the reference count of the rdata
object at 1.

This leads to the following kmemleak report:
unreferenced object 0xffff88006542aa00 (size 512):
  comm "kworker/0:2", pid 24, jiffies 4294899222 (age 226.880s)
  hex dump (first 32 bytes):
    68 96 fe 65 00 88 ff ff 00 00 00 00 00 00 00 00  h..e............
    01 00 00 00 08 00 00 00 02 c5 45 24 ac b8 00 10  ..........E$....
  backtrace:
    [<(____ptrval____)>] fcoe_ctlr_vn_add.isra.5+0x7f/0x770 [libfcoe]
    [<(____ptrval____)>] fcoe_ctlr_vn_recv+0x12af/0x27f0 [libfcoe]
    [<(____ptrval____)>] fcoe_ctlr_recv_work+0xd01/0x32f0 [libfcoe]
    [<(____ptrval____)>] process_one_work+0x7ff/0x1420
    [<(____ptrval____)>] worker_thread+0x87/0xef0
    [<(____ptrval____)>] kthread+0x2db/0x390
    [<(____ptrval____)>] ret_from_fork+0x35/0x40
    [<(____ptrval____)>] 0xffffffffffffffff

Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reported-by: ard <ard@kwaak.net>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: fcoe: drop frames in ELS LOGO error path

[ Upstream commit 63d0e3dffda311e77b9a8c500d59084e960a824a ]

Drop the frames in the ELS LOGO error path instead of just returning an
error.

This fixes the following kmemleak report:
unreferenced object 0xffff880064cb1000 (size 424):
  comm "kworker/0:2", pid 24, jiffies 4294904293 (age 68.504s)
  hex dump (first 32 bytes):
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<(____ptrval____)>] _fc_frame_alloc+0x2c/0x180 [libfc]
    [<(____ptrval____)>] fc_lport_enter_logo+0x106/0x360 [libfc]
    [<(____ptrval____)>] fc_fabric_logoff+0x8c/0xc0 [libfc]
    [<(____ptrval____)>] fcoe_if_destroy+0x79/0x3b0 [fcoe]
    [<(____ptrval____)>] fcoe_destroy_work+0xd2/0x170 [fcoe]
    [<(____ptrval____)>] process_one_work+0x7ff/0x1420
    [<(____ptrval____)>] worker_thread+0x87/0xef0
    [<(____ptrval____)>] kthread+0x2db/0x390
    [<(____ptrval____)>] ret_from_fork+0x35/0x40
    [<(____ptrval____)>] 0xffffffffffffffff

which can be triggered by issuing
echo eth0 > /sys/bus/fcoe/ctlr_destroy

Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

memcg: remove memcg_cgroup::id from IDR on mem_cgroup_css_alloc() failure

[ Upstream commit 7e97de0b033bcac4fa9a35cef72e0c06e6a22c67 ]

In case of memcg_online_kmem() failure, memcg_cgroup::id remains hashed
in mem_cgroup_idr even after memcg memory is freed.  This leads to leak
of ID in mem_cgroup_idr.

This patch adds removal into mem_cgroup_css_alloc(), which fixes the
problem.  For better readability, it adds a generic helper which is used
in mem_cgroup_alloc() and mem_cgroup_id_put_many() as well.

Link: http://lkml.kernel.org/r/152354470916.22460.14397070748001974638.stgit@localhost.localdomain
Fixes 73f576c04b94 ("mm: memcontrol: fix cgroup creation failure after many small jobs")
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Michal Hocko <mhocko@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers: net: lmc: fix case value for target abort error

[ Upstream commit afb41bb039656f0cecb54eeb8b2e2088201295f5 ]

Current value for a target abort error is 0x010, however, this value
should in fact be 0x002.  As it stands, the range of error is 0..7 so
it is currently never being detected.  This bug has been in the driver
since the early 2.6.12 days (or before).

Detected by CoverityScan, CID#744290 ("Logically dead code")

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Squashfs: Compute expected length from inode size rather than block length

[ Upstream commit a3f94cb99a854fa381fe7fadd97c4f61633717a5 ]

Previously in squashfs_readpage() when copying data into the page
cache, it used the length of the datablock read from the filesystem
(after decompression).  However, if the filesystem has been corrupted
this data block may be short, which will leave pages unfilled.

The fix for this is to compute the expected number of bytes to copy
from the inode size, and use this to detect if the block is short.

Signed-off-by: Phillip Lougher <phillip@squashfs.org.uk>
Tested-by: Willy Tarreau <w@1wt.eu>
Cc: Анатолий Тросиненко <anatoly.trosinenko@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

squashfs metadata 2: electric boogaloo

[ Upstream commit cdbb65c4c7ead680ebe54f4f0d486e2847a500ea ]

Anatoly continues to find issues with fuzzed squashfs images.

This time, corrupt, missing, or undersized data for the page filling
wasn't checked for, because the squashfs_{copy,read}_cache() functions
did the squashfs_copy_data() call without checking the resulting data
size.

Which could result in the page cache pages being incompletely filled in,
and no error indication to the user space reading garbage data.

So make a helper function for the "fill in pages" case, because the
exact same incomplete sequence existed in two places.

[ I should have made a squashfs branch for these things, but I didn't
  intend to start doing them in the first place.

  My historical connection through cramfs is why I got into looking at
  these issues at all, and every time I (continue to) think it's a
  one-off.

  Because _this_ time is always the last time. Right?   - Linus ]

Reported-by: Anatoly Trosinenko <anatoly.trosinenko@gmail.com>
Tested-by: Willy Tarreau <w@1wt.eu>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Phillip Lougher <phillip@squashfs.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arc: fix type warnings in arc/mm/cache.c

[ Upstream commit ec837d620c750c0d4996a907c8c4f7febe1bbeee ]

Fix type warnings in arch/arc/mm/cache.c.

../arch/arc/mm/cache.c: In function 'flush_anon_page':
../arch/arc/mm/cache.c:1062:55: warning: passing argument 2 of '__flush_dcache_page' makes integer from pointer without a cast [-Wint-conversion]
  __flush_dcache_page((phys_addr_t)page_address(page), page_address(page));
                                                       ^~~~~~~~~~~~~~~~~~
../arch/arc/mm/cache.c:1013:59: note: expected 'long unsigned int' but argument is of type 'void *'
 void __flush_dcache_page(phys_addr_t paddr, unsigned long vaddr)
                                             ~~~~~~~~~~~~~~^~~~~

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: linux-snps-arc@lists.infradead.org
Cc: Elad Kanfi <eladkan@mellanox.com>
Cc: Leon Romanovsky <leonro@mellanox.com>
Cc: Ofer Levi <oferle@mellanox.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arc: fix build errors in arc/include/asm/delay.h

[ Upstream commit 2423665ec53f2a29191b35382075e9834288a975 ]

Fix build errors in arch/arc/'s delay.h:
- add "extern unsigned long loops_per_jiffy;"
- add <asm-generic/types.h> for "u64"

In file included from ../drivers/infiniband/hw/cxgb3/cxio_hal.c:32:
../arch/arc/include/asm/delay.h: In function '__udelay':
../arch/arc/include/asm/delay.h:61:12: error: 'u64' undeclared (first use in this function)
  loops = ((u64) usecs * 4295 * HZ * loops_per_jiffy) >> 32;
            ^~~

In file included from ../drivers/infiniband/hw/cxgb3/cxio_hal.c:32:
../arch/arc/include/asm/delay.h: In function '__udelay':
../arch/arc/include/asm/delay.h:63:37: error: 'loops_per_jiffy' undeclared (first use in this function)
  loops = ((u64) usecs * 4295 * HZ * loops_per_jiffy) >> 32;
                                     ^~~~~~~~~~~~~~~

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: linux-snps-arc@lists.infradead.org
Cc: Elad Kanfi <eladkan@mellanox.com>
Cc: Leon Romanovsky <leonro@mellanox.com>
Cc: Ofer Levi <oferle@mellanox.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arc: [plat-eznps] fix data type errors in platform headers

[ Upstream commit b1f32ce1c3d2c11959b7e6a2c58dc5197c581966 ]

Add <linux/types.h> to fix build errors.
Both ctop.h and <soc/nps/common.h> use u32 types and cause many
errors.

Examples:
../include/soc/nps/common.h:71:4: error: unknown type name 'u32'
    u32 __reserved:20, cluster:4, core:4, thread:4;
../include/soc/nps/common.h:76:3: error: unknown type name 'u32'
   u32 value;
../include/soc/nps/common.h:124:4: error: unknown type name 'u32'
    u32 base:8, cl_x:4, cl_y:4,
../include/soc/nps/common.h:127:3: error: unknown type name 'u32'
   u32 value;

../arch/arc/plat-eznps/include/plat/ctop.h:83:4: error: unknown type name 'u32'
    u32 gen:1, gdis:1, clk_gate_dis:1, asb:1,
../arch/arc/plat-eznps/include/plat/ctop.h:86:3: error: unknown type name 'u32'
   u32 value;
../arch/arc/plat-eznps/include/plat/ctop.h:93:4: error: unknown type name 'u32'
    u32 csa:22, dmsid:6, __reserved:3, cs:1;
../arch/arc/plat-eznps/include/plat/ctop.h:95:3: error: unknown type name 'u32'
   u32 value;

Cc: linux-snps-arc@lists.infradead.org
Cc: Ofer Levi <oferle@mellanox.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

enic: handle mtu change for vf properly

[ Upstream commit ab123fe071c9aa9680ecd62eb080eb26cff4892c ]

When driver gets notification for mtu change, driver does not handle it for
all RQs. It handles only RQ[0].

Fix is to use enic_change_mtu() interface to change mtu for vf.

Signed-off-by: Govindarajulu Varadarajan <gvaradar@cisco.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "MIPS: BCM47XX: Enable 74K Core ExternalSync for PCIe erratum"

[ Upstream commit d5ea019f8a381f88545bb26993b62ec24a2796b7 ]

This reverts commit 2a027b47dba6 ("MIPS: BCM47XX: Enable 74K Core
ExternalSync for PCIe erratum").

Enabling ExternalSync caused a regression for BCM4718A1 (used e.g. in
Netgear E3000 and ASUS RT-N16): it simply hangs during PCIe
initialization. It's likely that BCM4717A1 is also affected.

I didn't notice that earlier as the only BCM47XX devices with PCIe I
own are:
1) BCM4706 with 2 x 14e4:4331
2) BCM4706 with 14e4:4360 and 14e4:4331
it appears that BCM4706 is unaffected.

While BCM5300X-ES300-RDS.pdf seems to document that erratum and its
workarounds (according to quotes provided by Tokunori) it seems not even
Broadcom follows them.

According to the provided info Broadcom should define CONF7_ES in their
SDK's mipsinc.h and implement workaround in the si_mips_init(). Checking
both didn't reveal such code. It *could* mean Broadcom also had some
problems with the given workaround.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Reported-by: Michael Marley <michael@michaelmarley.com>
Patchwork: https://patchwork.linux-mips.org/patch/20032/
URL: https://bugs.openwrt.org/index.php?do=details&task_id=1688
Cc: Tokunori Ikegami <ikegami@allied-telesis.co.jp>
Cc: Hauke Mehrtens <hauke@hauke-m.de>
Cc: Chris Packham <chris.packham@alliedtelesis.co.nz>
Cc: James Hogan <jhogan@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tools/power turbostat: Read extended processor family from CPUID

[ Upstream commit 5aa3d1a20a233d4a5f1ec3d62da3f19d9afea682 ]

This fixes the reported family on modern AMD processors (e.g. Ryzen,
which is family 0x17). Previously these processors all showed up as
family 0xf.

See the document
https://support.amd.com/TechDocs/56255_OSRR.pdf
section CPUID_Fn00000001_EAX for how to calculate the family
from the BaseFamily and ExtFamily values.

This matches the code in arch/x86/lib/cpu.c

Signed-off-by: Calvin Walton <calvin.walton@kepstin.ca>
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

zswap: re-check zswap_is_full() after do zswap_shrink()

[ Upstream commit 16e536ef47f567289a5699abee9ff7bb304bc12d ]

/sys/../zswap/stored_pages keeps rising in a zswap test with
"zswap.max_pool_percent=0" parameter.  But it should not compress or
store pages any more since there is no space in the compressed pool.

Reproduce steps:
  1. Boot kernel with "zswap.enabled=1"
  2. Set the max_pool_percent to 0
      # echo 0 > /sys/module/zswap/parameters/max_pool_percent
  3. Do memory stress test to see if some pages have been compressed
      # stress --vm 1 --vm-bytes $mem_available"M" --timeout 60s
  4. Watching the 'stored_pages' number increasing or not

The root cause is:

  When zswap_max_pool_percent is set to 0 via kernel parameter,
  zswap_is_full() will always return true due to zswap_shrink().  But if
  the shinking is able to reclain a page successfully the code then
  proceeds to compressing/storing another page, so the value of
  stored_pages will keep changing.

To solve the issue, this patch adds a zswap_is_full() check again after
  zswap_shrink() to make sure it's now under the max_pool_percent, and to
  not compress/store if we reached the limit.

Link: http://lkml.kernel.org/r/20180530103936.17812-1-liwang@redhat.com
Signed-off-by: Li Wang <liwang@redhat.com>
Acked-by: Dan Streetman <ddstreet@ieee.org>
Cc: Seth Jennings <sjenning@redhat.com>
Cc: Huang Ying <huang.ying.caritas@gmail.com>
Cc: Yu Zhao <yuzhao@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

selftests/ftrace: Add snapshot and tracing_on test case

[ Upstream commit 82f4f3e69c5c29bce940dd87a2c0f16c51d48d17 ]

Add a testcase for checking snapshot and tracing_on
relationship. This ensures that the snapshotting doesn't
affect current tracing on/off settings.

Link: http://lkml.kernel.org/r/153149932412.11274.15289227592627901488.stgit@devbox
Cc: Tom Zanussi <tom.zanussi@linux.intel.com>
Cc: Hiraku Toyooka <hiraku.toyooka@cybertrust.co.jp>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: linux-kselftest@vger.kernel.org
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cachefiles: Wait rather than BUG'ing on "Unexpected object collision"

[ Upstream commit c2412ac45a8f8f1cd582723c1a139608694d410d ]

If we meet a conflicting object that is marked FSCACHE_OBJECT_IS_LIVE in
the active object tree, we have been emitting a BUG after logging
information about it and the new object.

Instead, we should wait for the CACHEFILES_OBJECT_ACTIVE flag to be cleared
on the old object (or return an error).  The ACTIVE flag should be cleared
after it has been removed from the active object tree.  A timeout of 60s is
used in the wait, so we shouldn't be able to get stuck there.

Fixes: 9ae326a69004 ("CacheFiles: A cache that backs onto a mounted filesystem")
Signed-off-by: Kiran Kumar Modukuri <kiran.modukuri@gmail.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cachefiles: Fix refcounting bug in backing-file read monitoring

[ Upstream commit 934140ab028713a61de8bca58c05332416d037d1 ]

cachefiles_read_waiter() has the right to access a 'monitor' object by
virtue of being called under the waitqueue lock for one of the pages in its
purview.  However, it has no ref on that monitor object or on the
associated operation.

What it is allowed to do is to move the monitor object to the operation's
to_do list, but once it drops the work_lock, it's actually no longer
permitted to access that object.  However, it is trying to enqueue the
retrieval operation for processing - but it can only do this via a pointer
in the monitor object, something it shouldn't be doing.

If it doesn't enqueue the operation, the operation may not get processed.
If the order is flipped so that the enqueue is first, then it's possible
for the work processor to look at the to_do list before the monitor is
enqueued upon it.

Fix this by getting a ref on the operation so that we can trust that it
will still be there once we've added the monitor to the to_do list and
dropped the work_lock.  The op can then be enqueued after the lock is
dropped.

The bug can manifest in one of a couple of ways.  The first manifestation
looks like:

 FS-Cache:
 FS-Cache: Assertion failed
 FS-Cache: 6 == 5 is false
 ------------[ cut here ]------------
 kernel BUG at fs/fscache/operation.c:494!
 RIP: 0010:fscache_put_operation+0x1e3/0x1f0
 ...
 fscache_op_work_func+0x26/0x50
 process_one_work+0x131/0x290
 worker_thread+0x45/0x360
 kthread+0xf8/0x130
 ? create_worker+0x190/0x190
 ? kthread_cancel_work_sync+0x10/0x10
 ret_from_fork+0x1f/0x30

This is due to the operation being in the DEAD state (6) rather than
INITIALISED, COMPLETE or CANCELLED (5) because it's already passed through
fscache_put_operation().

The bug can also manifest like the following:

 kernel BUG at fs/fscache/operation.c:69!
 ...
    [exception RIP: fscache_enqueue_operation+246]
 ...
 #7 [ffff883fff083c10] fscache_enqueue_operation at ffffffffa0b793c6
 #8 [ffff883fff083c28] cachefiles_read_waiter at ffffffffa0b15a48
 #9 [ffff883fff083c48] __wake_up_common at ffffffff810af028

I'm not entirely certain as to which is line 69 in Lei's kernel, so I'm not
entirely clear which assertion failed.

Fixes: 9ae326a69004 ("CacheFiles: A cache that backs onto a mounted filesystem")
Reported-by: Lei Xue <carmark.dlut@gmail.com>
Reported-by: Vegard Nossum <vegard.nossum@gmail.com>
Reported-by: Anthony DeRobertis <aderobertis@metrics.net>
Reported-by: NeilBrown <neilb@suse.com>
Reported-by: Daniel Axtens <dja@axtens.net>
Reported-by: Kiran Kumar Modukuri <kiran.modukuri@gmail.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fscache: Allow cancelled operations to be enqueued

[ Upstream commit d0eb06afe712b7b103b6361f40a9a0c638524669 ]

Alter the state-check assertion in fscache_enqueue_operation() to allow
cancelled operations to be given processing time so they can be cleaned up.

Also fix a debugging statement that was requiring such operations to have
an object assigned.

Fixes: 9ae326a69004 ("CacheFiles: A cache that backs onto a mounted filesystem")
Reported-by: Kiran Kumar Modukuri <kiran.modukuri@gmail.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/boot: Fix if_changed build flip/flop bug

[ Upstream commit 92a4728608a8fd228c572bc8ff50dd98aa0ddf2a ]

Dirk Gouders reported that two consecutive "make" invocations on an
already compiled tree will show alternating behaviors:

$ make
  CALL    scripts/checksyscalls.sh
  DESCEND  objtool
  CHK     include/generated/compile.h
  DATAREL arch/x86/boot/compressed/vmlinux
Kernel: arch/x86/boot/bzImage is ready  (#48)
  Building modules, stage 2.
  MODPOST 165 modules

$ make
  CALL    scripts/checksyscalls.sh
  DESCEND  objtool
  CHK     include/generated/compile.h
  LD      arch/x86/boot/compressed/vmlinux
  ZOFFSET arch/x86/boot/zoffset.h
  AS      arch/x86/boot/header.o
  LD      arch/x86/boot/setup.elf
  OBJCOPY arch/x86/boot/setup.bin
  OBJCOPY arch/x86/boot/vmlinux.bin
  BUILD   arch/x86/boot/bzImage
Setup is 15644 bytes (padded to 15872 bytes).
System is 6663 kB
CRC 3eb90f40
Kernel: arch/x86/boot/bzImage is ready  (#48)
  Building modules, stage 2.
  MODPOST 165 modules

He bisected it back to:

    commit 98f78525371b ("x86/boot: Refuse to build with data relocations")

The root cause was the use of the "if_changed" kbuild function multiple
times for the same target. It was designed to only be used once per
target, otherwise it will effectively always trigger, flipping back and
forth between the two commands getting recorded by "if_changed". Instead,
this patch merges the two commands into a single function to get stable
build artifacts (i.e. .vmlinux.cmd), and a single build behavior.

Bisected-and-Reported-by: Dirk Gouders <dirk@gouders.net>
Fix-Suggested-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20180724230827.GA37823@beast
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: axienet: Fix double deregister of mdio

[ Upstream commit 03bc7cab7d7218088412a75e141696a89059ab00 ]

If the registration fails then mdio_unregister is called.
However at unbind the unregister ia attempted again resulting
in the below crash

[   73.544038] kernel BUG at drivers/net/phy/mdio_bus.c:415!
[   73.549362] Internal error: Oops - BUG: 0 [#1] SMP
[   73.554127] Modules linked in:
[   73.557168] CPU: 0 PID: 2249 Comm: sh Not tainted 4.14.0 #183
[   73.562895] Hardware name: xlnx,zynqmp (DT)
[   73.567062] task: ffffffc879e41180 task.stack: ffffff800cbe0000
[   73.572973] PC is at mdiobus_unregister+0x84/0x88
[   73.577656] LR is at axienet_mdio_teardown+0x18/0x30
[   73.582601] pc : [<ffffff80085fa4cc>] lr : [<ffffff8008616858>]
pstate: 20000145
[   73.589981] sp : ffffff800cbe3c30
[   73.593277] x29: ffffff800cbe3c30 x28: ffffffc879e41180
[   73.598573] x27: ffffff8008a21000 x26: 0000000000000040
[   73.603868] x25: 0000000000000124 x24: ffffffc879efe920
[   73.609164] x23: 0000000000000060 x22: ffffffc879e02000
[   73.614459] x21: ffffffc879e02800 x20: ffffffc87b0b8870
[   73.619754] x19: ffffffc879e02800 x18: 000000000000025d
[   73.625050] x17: 0000007f9a719ad0 x16: ffffff8008195bd8
[   73.630345] x15: 0000007f9a6b3d00 x14: 0000000000000010
[   73.635640] x13: 74656e7265687465 x12: 0000000000000030
[   73.640935] x11: 0000000000000030 x10: 0101010101010101
[   73.646231] x9 : 241f394f42533300 x8 : ffffffc8799f6e98
[   73.651526] x7 : ffffffc8799f6f18 x6 : ffffffc87b0ba318
[   73.656822] x5 : ffffffc87b0ba498 x4 : 0000000000000000
[   73.662117] x3 : 0000000000000000 x2 : 0000000000000008
[   73.667412] x1 : 0000000000000004 x0 : ffffffc8799f4000
[   73.672708] Process sh (pid: 2249, stack limit = 0xffffff800cbe0000)

Fix the same by making the bus NULL on unregister.

Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

qmi_wwan: fix interface number for DW5821e production firmware

[ Upstream commit f25e1392fdb556290957142ac2da33a02cbff403 ]

The original mapping for the DW5821e was done using a development
version of the firmware. Confirmed with the vendor that the final
USB layout ends up exposing the QMI control/data ports in USB
config #1, interface #0, not in interface #1 (which is now a HID
interface).

T:  Bus=01 Lev=03 Prnt=04 Port=00 Cnt=01 Dev#= 16 Spd=480 MxCh= 0
D:  Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs=  2
P:  Vendor=413c ProdID=81d7 Rev=03.18
S:  Manufacturer=DELL
S:  Product=DW5821e Snapdragon X20 LTE
S:  SerialNumber=0123456789ABCDEF
C:  #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA
I:  If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
I:  If#= 1 Alt= 0 #EPs= 1 Cls=03(HID  ) Sub=00 Prot=00 Driver=usbhid
I:  If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option

Fixes: e7e197edd09c25 ("qmi_wwan: add support for the Dell Wireless 5821e module")
Signed-off-by: Aleksander Morgado <aleksander@aleksander.es>
Acked-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bnx2x: Fix invalid memory access in rss hash config path.

[ Upstream commit ae2dcb28c24794a87e424a726a1cf1a61980f52d ]

Rx hash/filter table configuration uses rss_conf_obj to configure filters
in the hardware. This object is initialized only when the interface is
brought up.
This patch adds driver changes to configure rss params only when the device
is in opened state. In port disabled case, the config will be cached in the
driver structure which will be applied in the successive load path.

Please consider applying it to 'net' branch.

Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: staging: omap4iss: Include asm/cacheflush.h after generic includes

[ Upstream commit 0894da849f145af51bde88a6b84f95b9c9e0bc66 ]

Including asm/cacheflush.h first results in the following build error
when trying to build sparc32:allmodconfig, because 'struct page' has not
been declared, and the function declaration ends up creating a separate
(private) declaration of struct page (as a result of function arguments
being in the scope of the function declaration and definition, not in
global scope).

The C scoping rules do not just affect variable visibility, they also
affect type declaration visibility.

The end result is that when the actual call site is seen in
<linux/highmem.h>, the 'struct page' type in the caller is not the same
'struct page' that the function was declared with, resulting in:

  In file included from arch/sparc/include/asm/page.h:10:0,
                   ...
                   from drivers/staging/media/omap4iss/iss_video.c:15:
  include/linux/highmem.h: In function 'clear_user_highpage':
  include/linux/highmem.h:137:31: error:
passing argument 1 of 'sparc_flush_page_to_ram' from incompatible
pointer type

Include generic includes files first to fix the problem.

Fixes: fc96d58c10162 ("[media] v4l: omap4iss: Add support for OMAP4 camera interface - Video devices")
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Acked-by: David S. Miller <davem@davemloft.net>
Cc: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
[ Added explanation of C scope rules - Linus ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf/x86/amd/ibs: Don't access non-started event

[ Upstream commit d2753e6b4882a637a0e8fb3b9c2e15f33265300e ]

Paul Menzel reported the following bug:

> Enabling the undefined behavior sanitizer and building GNU/Linux 4.18-rc5+
> (with some unrelated commits) with GCC 8.1.0 from Debian Sid/unstable, the
> warning below is shown.
>
> > [    2.111913]
> > ================================================================================
> > [    2.111917] UBSAN: Undefined behaviour in arch/x86/events/amd/ibs.c:582:24
> > [    2.111919] member access within null pointer of type 'struct perf_event'
> > [    2.111926] CPU: 0 PID: 144 Comm: udevadm Not tainted 4.18.0-rc5-00316-g4864b68cedf2 #104
> > [    2.111928] Hardware name: ASROCK E350M1/E350M1, BIOS TIMELESS 01/01/1970
> > [    2.111930] Call Trace:
> > [    2.111943]  dump_stack+0x55/0x89
> > [    2.111949]  ubsan_epilogue+0xb/0x33
> > [    2.111953]  handle_null_ptr_deref+0x7f/0x90
> > [    2.111958]  __ubsan_handle_type_mismatch_v1+0x55/0x60
> > [    2.111964]  perf_ibs_handle_irq+0x596/0x620

The code dereferences event before checking the STARTED bit. Patch
below should cure the issue.

The warning should not trigger, if I analyzed the thing correctly.
(And Paul's testing confirms this.)

Reported-by: Paul Menzel <pmenzel@molgen.mpg.de>
Tested-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul Menzel <pmenzel+linux-x86@molgen.mpg.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Link: http://lkml.kernel.org/r/alpine.DEB.2.21.1807200958390.1580@nanos.tec.linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

i2c: davinci: Avoid zero value of CLKH

[ Upstream commit cc8de9a68599b261244ea453b38678229f06ada7 ]

If CLKH is set to 0 I2C clock is not generated at all, so avoid this value
and stretch the clock in this case.

Signed-off-by: Alexander Sverdlin <alexander.sverdlin@nokia.com>
Acked-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

can: mpc5xxx_can: check of_iomap return before use

[ Upstream commit b5c1a23b17e563b656cc9bb76ce5323b997d90e8 ]

of_iomap() can return NULL so that return needs to be checked and NULL
treated as failure. While at it also take care of the missing
of_node_put() in the error path.

Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Fixes: commit afa17a500a36 ("net/can: add driver for mscan family & mpc52xx_mscan")
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: prevent ISA drivers from building on PPC32

[ Upstream commit c9ce1fa1c24b08e13c2a3b5b1f94a19c9eaa982c ]

Prevent drivers from building on PPC32 if they use isa_bus_to_virt(),
isa_virt_to_bus(), or isa_page_to_bus(), which are not available and
thus cause build errors.

../drivers/net/ethernet/3com/3c515.c: In function 'corkscrew_open':
../drivers/net/ethernet/3com/3c515.c:824:9: error: implicit declaration of function 'isa_virt_to_bus'; did you mean 'virt_to_bus'? [-Werror=implicit-function-declaration]

../drivers/net/ethernet/amd/lance.c: In function 'lance_rx':
../drivers/net/ethernet/amd/lance.c:1203:23: error: implicit declaration of function 'isa_bus_to_virt'; did you mean 'bus_to_virt'? [-Werror=implicit-function-declaration]

../drivers/net/ethernet/amd/ni65.c: In function 'ni65_init_lance':
../drivers/net/ethernet/amd/ni65.c:585:20: error: implicit declaration of function 'isa_virt_to_bus'; did you mean 'virt_to_bus'? [-Werror=implicit-function-declaration]

../drivers/net/ethernet/cirrus/cs89x0.c: In function 'net_open':
../drivers/net/ethernet/cirrus/cs89x0.c:897:20: error: implicit declaration of function 'isa_virt_to_bus'; did you mean 'virt_to_bus'? [-Werror=implicit-function-declaration]

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Suggested-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

atl1c: reserve min skb headroom

[ Upstream commit 6e56830776828d8ca9897fc4429eeab47c3bb432 ]

Got crash report with following backtrace:
BUG: unable to handle kernel paging request at ffff8801869daffe
RIP: 0010:[<ffffffff816429c4>]  [<ffffffff816429c4>] ip6_finish_output2+0x394/0x4c0
RSP: 0018:ffff880186c83a98  EFLAGS: 00010283
RAX: ffff8801869db00e ...
  [<ffffffff81644cdc>] ip6_finish_output+0x8c/0xf0
  [<ffffffff81644d97>] ip6_output+0x57/0x100
  [<ffffffff81643dc9>] ip6_forward+0x4b9/0x840
  [<ffffffff81645566>] ip6_rcv_finish+0x66/0xc0
  [<ffffffff81645db9>] ipv6_rcv+0x319/0x530
  [<ffffffff815892ac>] netif_receive_skb+0x1c/0x70
  [<ffffffffc0060bec>] atl1c_clean+0x1ec/0x310 [atl1c]
  ...

The bad access is in neigh_hh_output(), at skb->data - 16 (HH_DATA_MOD).
atl1c driver provided skb with no headroom, so 14 bytes (ethernet
header) got pulled, but then 16 are copied.

Reserve NET_SKB_PAD bytes headroom, like netdev_alloc_skb().

Compile tested only; I lack hardware.

Fixes: 7b7017642199 ("atl1c: Fix misuse of netdev_alloc_skb in refilling rx ring")
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

qed: Correct Multicast API to reflect existence of 256 approximate buckets.

[ Upstream commit 25c020a90919632b3425c19dc09188d56b9ed59a ]

FW hsi contains 256 approximation buckets which are split in ramrod into
eight u32 values, but driver is using eight 'unsigned long' variables.

This patch fixes the mcast logic by making the API utilize u32.

Fixes: 83aeb933 ("qed*: Trivial modifications")
Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com>
Signed-off-by: Ariel Elior <ariel.elior@cavium.com>
Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

qed: Fix possible race for the link state value.

[ Upstream commit 58874c7b246109d8efb2b0099d1aa296d6bfc3fa ]

There's a possible race where driver can read link status in mid-transition
and see that virtual-link is up yet speed is 0. Since in this
mid-transition we're guaranteed to see a mailbox from MFW soon, we can
afford to treat this as link down.

Fixes: cc875c2e ("qed: Add link support")
Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com>
Signed-off-by: Ariel Elior <ariel.elior@cavium.com>
Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: caif: Add a missing rcu_read_unlock() in caif_flow_cb

[ Upstream commit 64119e05f7b31e83e2555f6782e6cdc8f81c63f4 ]

Add a missing rcu_read_unlock in the error path

Fixes: c95567c80352 ("caif: added check for potential null return")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tools/power turbostat: fix -S on UP systems

[ Upstream commit 9d83601a9cc1884d1b5706ee2acc661d558c6838 ]

The -S (system summary) option failed to print any data on a 1-processor system.

Reported-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bpf, ppc64: fix unexpected r0=0 exit path inside bpf_xadd

[ Upstream commit b9c1e60e7bf4e64ac1b4f4d6d593f0bb57886973 ]

None of the JITs is allowed to implement exit paths from the BPF
insn mappings other than BPF_JMP | BPF_EXIT. In the BPF core code
we have a couple of rewrites in eBPF (e.g. LD_ABS / LD_IND) and
in eBPF to cBPF translation to retain old existing behavior where
exceptions may occur; they are also tightly controlled by the
verifier where it disallows some of the features such as BPF to
BPF calls when legacy LD_ABS / LD_IND ops are present in the BPF
program. During recent review of all BPF_XADD JIT implementations
I noticed that the ppc64 one is buggy in that it contains two
jumps to exit paths. This is problematic as this can bypass verifier
expectations e.g. pointed out in commit f6b1b3bf0d5f ("bpf: fix
subprog verifier bypass by div/mod by 0 exception"). The first
exit path is obsoleted by the fix in ca36960211eb ("bpf: allow xadd
only on aligned memory") anyway, and for the second one we need to
do a fetch, add and store loop if the reservation from lwarx/ldarx
was lost in the meantime.

Fixes: 156d0e290e96 ("powerpc/ebpf/jit: Implement JIT compiler for extended BPF")
Reviewed-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Reviewed-by: Sandipan Das <sandipan@linux.vnet.ibm.com>
Tested-by: Sandipan Das <sandipan@linux.vnet.ibm.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: gadget: f_uac2: fix endianness of 'struct cntrl_*_lay3'

[ Upstream commit eec24f2a0d4dc3b1d95a3ccd2feb523ede3ba775 ]

The list [1] of commits doing endianness fixes in USB subsystem is long
due to below quote from USB spec Revision 2.0 from April 27, 2000:

------------
8.1 Byte/Bit Ordering

Multiple byte fields in standard descriptors, requests, and responses
are interpreted as and moved over the bus in little-endian order, i.e.
LSB to MSB.
------------

This commit belongs to the same family.

[1] Example of endianness fixes in USB subsystem:
commit 14e1d56cbea6 ("usb: gadget: f_uac2: endianness fixes.")
commit 42370b821168 ("usb: gadget: f_uac1: endianness fixes.")
commit 63afd5cc7877 ("USB: chaoskey: fix Alea quirk on big-endian hosts")
commit 74098c4ac782 ("usb: gadget: acm: fix endianness in notifications")
commit cdd7928df0d2 ("ACM gadget: fix endianness in notifications")
commit 323ece54e076 ("cdc-wdm: fix endianness bug in debug statements")
commit e102609f1072 ("usb: gadget: uvc: Fix endianness mismatches")
       list goes on

Fixes: 132fcb460839 ("usb: gadget: Add Audio Class 2.0 Driver")
Signed-off-by: Eugeniu Rosca <erosca@de.adit-jv.com>
Reviewed-by: Ruslan Bilovol <ruslan.bilovol@gmail.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tools: usb: ffs-test: Fix build on big endian systems

[ Upstream commit a2b22dddc7bb6110ac3b5ed1a60aa9279836fadb ]

The tools/usb/ffs-test.c file defines cpu_to_le16/32 by using the C
library htole16/32 function calls. However, cpu_to_le16/32 are used when
initializing structures, i.e in a context where a function call is not
allowed.

It works fine on little endian systems because htole16/32 are defined by
the C library as no-ops. But on big-endian systems, they are actually
doing something, which might involve calling a function, causing build
failures, such as:

   ffs-test.c:48:25: error: initializer element is not constant
    #define cpu_to_le32(x)  htole32(x)
                            ^~~~~~~
   ffs-test.c:128:12: note: in expansion of macro ‘cpu_to_le32’
      .magic = cpu_to_le32(FUNCTIONFS_DESCRIPTORS_MAGIC_V2),
               ^~~~~~~~~~~

To solve this, we code cpu_to_le16/32 in a way that allows them to be
used when initializing structures. This fix was imported from
meta-openembedded/android-tools/fix-big-endian-build.patch written by
Thomas Petazzoni <thomas.petazzoni@free-electrons.com>.

CC: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb/phy: fix PPC64 build errors in phy-fsl-usb.c

[ Upstream commit a39ba90a1cc7010edb0a7132e1b67f3d80b994e9 ]

Fix build errors when built for PPC64:
These variables are only used on PPC32 so they don't need to be
initialized for PPC64.

../drivers/usb/phy/phy-fsl-usb.c: In function 'usb_otg_start':
../drivers/usb/phy/phy-fsl-usb.c:865:3: error: '_fsl_readl' undeclared (first use in this function); did you mean 'fsl_readl'?
   _fsl_readl = _fsl_readl_be;
../drivers/usb/phy/phy-fsl-usb.c:865:16: error: '_fsl_readl_be' undeclared (first use in this function); did you mean 'fsl_readl'?
   _fsl_readl = _fsl_readl_be;
../drivers/usb/phy/phy-fsl-usb.c:866:3: error: '_fsl_writel' undeclared (first use in this function); did you mean 'fsl_writel'?
   _fsl_writel = _fsl_writel_be;
../drivers/usb/phy/phy-fsl-usb.c:866:17: error: '_fsl_writel_be' undeclared (first use in this function); did you mean 'fsl_writel'?
   _fsl_writel = _fsl_writel_be;
../drivers/usb/phy/phy-fsl-usb.c:868:16: error: '_fsl_readl_le' undeclared (first use in this function); did you mean 'fsl_readl'?
   _fsl_readl = _fsl_readl_le;
../drivers/usb/phy/phy-fsl-usb.c:869:17: error: '_fsl_writel_le' undeclared (first use in this function); did you mean 'fsl_writel'?
   _fsl_writel = _fsl_writel_le;

and the sysfs "show" function return type should be ssize_t, not int:

../drivers/usb/phy/phy-fsl-usb.c:1042:49: error: initialization of 'ssize_t (*)(struct device *, struct device_attribute *, char *)' {aka 'long int (*)(struct device *, struct device_attribute *, char *)'} from incompatible pointer type 'int (*)(struct device *, struct device_attribute *, char *)' [-Werror=incompatible-pointer-types]
 static DEVICE_ATTR(fsl_usb2_otg_state, S_IRUGO, show_fsl_usb2_otg_state, NULL);

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Felipe Balbi <balbi@kernel.org>
Cc: linux-usb@vger.kernel.org
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>