Mihai Moldovan [Mon, 25 Jul 2011 09:18:58 +0000 (11:18 +0200)]
wireless: fix a typo in ignore_reg_update
Just a typo fix changing regulaotry to regulatory.
Signed-off-by: Mihai Moldovan <ionic@ionic.de>
CC: John W. Linville <linville@tuxdriver.com>
CC: Mohammed Shafi <shafi.wireless@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Pavel Roskin [Fri, 22 Jul 2011 22:07:13 +0000 (18:07 -0400)]
b43: fix invalid memory access in b43_ssb_remove()
wldev is freed in b43_one_core_detach() and should not be accessed after
that call. Keep wldev->dev in a local variable.
Signed-off-by: Pavel Roskin <proski@gnu.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Rafał Miłecki [Fri, 22 Jul 2011 11:11:05 +0000 (13:11 +0200)]
b43: bcma: drop BROKEN
We've fixed the last issue with BCMA support which caused memory
corruption on loading and unloading b43. Support for BCMA in b43 was
tested with 14e4:4353, 14e4:4357, 14e4:4727 and 14e4:4331. First two
cards (BCM43224 and BCM43225) are supported.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Rafał Miłecki [Fri, 22 Jul 2011 11:11:04 +0000 (13:11 +0200)]
b43: bus: fix memory corruption when setting driver's data
Fixes bug described in:
https://bugzilla.kernel.org/show_bug.cgi?id=39172
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Sven Neumann [Tue, 12 Jul 2011 13:52:07 +0000 (15:52 +0200)]
cfg80211: really ignore the regulatory request
At the beginning of wiphy_update_regulatory() a check is performed
whether the request is to be ignored. Then the request is sent to
the driver nevertheless. This happens even if last_request points
to NULL, leading to a crash in the driver:
[<
bf01d864>] (lbs_set_11d_domain_info+0x28/0x1e4 [libertas]) from [<
c03b714c>] (wiphy_update_regulatory+0x4d0/0x4f4)
[<
c03b714c>] (wiphy_update_regulatory+0x4d0/0x4f4) from [<
c03b4008>] (wiphy_register+0x354/0x420)
[<
c03b4008>] (wiphy_register+0x354/0x420) from [<
bf01b17c>] (lbs_cfg_register+0x80/0x164 [libertas])
[<
bf01b17c>] (lbs_cfg_register+0x80/0x164 [libertas]) from [<
bf020e64>] (lbs_start_card+0x20/0x88 [libertas])
[<
bf020e64>] (lbs_start_card+0x20/0x88 [libertas]) from [<
bf02cbd8>] (if_sdio_probe+0x898/0x9c0 [libertas_sdio])
Fix this by returning early. Also remove the out: label as it is
not any longer needed.
Signed-off-by: Sven Neumann <s.neumann@raumfeld.com>
Cc: linux-wireless@vger.kernel.org
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Daniel Mack <daniel@zonque.org>
Cc: stable@kernel.org
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Dan Carpenter [Fri, 8 Jul 2011 07:21:15 +0000 (10:21 +0300)]
NFC: pn533: use after free in pn533_disconnect()
We freed "dev" on the line before.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
John W. Linville [Fri, 22 Jul 2011 20:22:14 +0000 (16:22 -0400)]
bcma: fix 'SSB_PCICORE_BFL_NOPCI' undeclared build breakage
linux-next-
20110722/drivers/bcma/driver_pci.c:175: error: 'SSB_PCICORE_BFL_NOPCI' undeclared (first use in this function)
Reported-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Rafał Miłecki [Thu, 21 Jul 2011 22:25:00 +0000 (00:25 +0200)]
b43legacy: dma: cache translation (routing bits)
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Tested-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Pavel Roskin [Thu, 21 Jul 2011 17:36:42 +0000 (13:36 -0400)]
ath5k: use get_unaligned_le32() in ath5k_write_pwr_to_pdadc_table()
Signed-off-by: Pavel Roskin <proski@gnu.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Pavel Roskin [Thu, 21 Jul 2011 17:36:35 +0000 (13:36 -0400)]
ath5k: remove ath5k_hw_get_capability(), don't use VEOL on AR5210
There are only two capabilities we need, and both are trivial to find.
ath5k_hw_hasbssidmask() is true on AR5212, but not on AR5210 or AR5211.
ath5k_hw_hasveol() is true on AR5211 and AR5212, but not on AR5210,
according to the HAL source.
Signed-off-by: Pavel Roskin <proski@gnu.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Pavel Roskin [Thu, 21 Jul 2011 17:36:28 +0000 (13:36 -0400)]
ath5k: merge ath5k_{init, deinit}_hw() with their thin wrappers
Signed-off-by: Pavel Roskin <proski@gnu.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Rafał Miłecki [Wed, 20 Jul 2011 18:02:39 +0000 (20:02 +0200)]
b43: (un)initialize driver on the BCMA bus
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Rafał Miłecki [Wed, 20 Jul 2011 17:52:16 +0000 (19:52 +0200)]
b43: bcma: get DMA translation bits
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Rafał Miłecki [Wed, 20 Jul 2011 17:52:15 +0000 (19:52 +0200)]
bcma: inform drivers about translation bits needed for the core
When using DMA, drivers need to pass special translation info to the
hardware.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Rafał Miłecki [Wed, 20 Jul 2011 17:52:14 +0000 (19:52 +0200)]
ssb: return correct translation bit for 64-bit DMA
Remove b43's workarounds at the same time. Other users of
ssb_dma_translation do not support any 64-bit DMA devices, so they are
not affected.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Rafał Miłecki [Wed, 20 Jul 2011 17:47:07 +0000 (19:47 +0200)]
b43: disable parity check on BCMA devices
Analyze of MMIO dumps from BCM43224, BCM43225, BCM4313 and BCM4331 has
shown that wl disables parity check for all that cards. This is required
for receiving any packets from the hardware.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Joe Perches [Wed, 20 Jul 2011 15:51:35 +0000 (08:51 -0700)]
rtlwifi: Convert printks to pr_<level>
Use the current logging styles.
Add pr_fmt where appropriate.
Remove now unnecessary prefixes from printks.
Convert hard coded prefix to __func__.
Add a missing "\n" to a format.
Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Felix Fietkau [Tue, 19 Jul 2011 06:46:44 +0000 (08:46 +0200)]
ath9k_hw: validate and fix broken eeprom chainmask settings
Some devices (e.g. Ubiquiti AirRouter) ship with broken EEPROM chainmask
data, which breaks the initial calibration after a hardware reset.
To fix this, mask the eeprom chainmask with the chainmask of the chip,
and use the chip chainmask if the result is zero.
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Amitkumar Karwar [Thu, 14 Jul 2011 03:51:59 +0000 (20:51 -0700)]
mwifiex: disable auto deep sleep before unloading the driver
Since the auto deep sleep mode has been enabled at driver init time
we should disable it at driver unloading to shutdown the function
gracefully.
Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Amitkumar Karwar [Thu, 14 Jul 2011 03:51:58 +0000 (20:51 -0700)]
mwifiex: check SDIO multi-port aggregation buffer room correctly
We should consider current packet length also while checking
Tx aggregation buffer room.
Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Amitkumar Karwar [Thu, 14 Jul 2011 03:51:57 +0000 (20:51 -0700)]
mwifiex: put multicast/broadcast packets to the same RA
For ad-hoc mode, RA is created for each peer connected. In case of
multicast traffic new RA will be created for each multicast
address. While processing Tx packets we have to go through this
RA list. We can avoid some RA nodes by sharing same RA for both
multicast and broadcast packets.
Therefore "memset(0xff)" is used to treat multicast packet as broadcast
one while choosing RA.
Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Emmanuel Grumbach [Thu, 21 Jul 2011 00:51:22 +0000 (17:51 -0700)]
iwlagn: probe would crash with DEBUG_SHIRQ
This is since my patch:
iwlagn: introduce transport layer and implement rx_init
The IRQ is requested before the locks are initialized, hence the crash.
Initialize the tasklet before we request the IRQ on the way.
Reported-by: Johannes Berg <johannes.berg@intel.com>
Tested-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Wey-Yi Guy [Mon, 18 Jul 2011 23:58:58 +0000 (16:58 -0700)]
iwlagn: remove "disable otp refresh" W/A
Remove the "disable otp refresh" work-around, not needed anymore.
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Johannes Berg [Sun, 17 Jul 2011 08:44:11 +0000 (01:44 -0700)]
iwlagn: rename iwlagn_set_dynamic_key
We now have iwlagn_set_dynamic_key() and
iwl_set_dynamic_key() which is confusing,
rename the former to iwlagn_send_sta_key()
to better reflect what it does -- it only
sends a command and doesn't change driver
state.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Johannes Berg [Mon, 18 Jul 2011 08:59:22 +0000 (01:59 -0700)]
iwlagn: track beacon interval sent to device
Sometimes, when mac80211 changes the beacon
interval or when it isn't yet set in mac80211
before association, the uCode will sysassert
because we send it confusing RXON timing vs.
PAN parameters. To fix this, track the last
beacon interval sent to the device and use
that in PAN parameter calculations.
This fixes a bug during P2P group formation
as a client (and possibly association to a
regular AP) while connected to another AP.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Wey-Yi Guy [Mon, 18 Jul 2011 20:59:23 +0000 (13:59 -0700)]
iwlagn: write iq invert register for 105/135 device
For 105/135 series of devices, we need to do I/Q invert just like 2000
series devices.
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Johannes Berg [Fri, 15 Jul 2011 20:23:45 +0000 (13:23 -0700)]
iwlagn: implement WoWLAN
Implement WoWLAN support in iwlagn. The device
supports a number of wakeup triggers and can do
GTK rekeying when asleep (if HW crypto is used).
Unfortunately, we need to disconnect from the AP
after resume since we can't yet get all the info
out of the wowlan uCode to stay connected safely.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Johannes Berg [Fri, 15 Jul 2011 20:03:12 +0000 (13:03 -0700)]
iwlagn: rewrite HW crypto
As I just discovered while doing WoWLAN, HW crypto
is done wrong for GTKs: they should be programmed
for the AP station ID (in the managed mode case)
and the HW can actually deal with multiple group
keys per station as well (which is useful in IBSS
RSN but that I've chosen not to use this).
To fix all this, modify the way keys are sent to
the device and key offsets are allocated. After
these changes, key offsets are stored into the
hw_key_idx which we can then track for the key
lifetime, not relying on our sta_cmd array. WEP
default keys get special treatment, of course.
Additionally, since I had the API for it, we can
now pre-fill TKIP phase 1 keys for RX now that we
can obtain the P1K from mac80211, a capability I
had added for WoWLAN initially.
Finally, some keys simply don't need to be added
into the device's key cache -- a key that won't
be used for RX is only needed in the TX header,
so "pretend" to have accepted any key without
adding it into the device -- no need to use up
key space there for it.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Johannes Berg [Thu, 14 Jul 2011 19:55:36 +0000 (12:55 -0700)]
iwlagn: remove forgotten debugfs function
It seems that due to merge issues between different
trees or so this function prototype wasn't removed
when it should have been, do it now.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Wey-Yi Guy [Wed, 13 Jul 2011 15:38:57 +0000 (08:38 -0700)]
iwlagn: remove un-necessary "_agn"
After driver split, extra _agn in priv structure is no needed, remove it.
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Johannes Berg [Wed, 13 Jul 2011 20:27:25 +0000 (13:27 -0700)]
iwlagn: remove keyinfo cache
iwlagn keeps a copy of key stuff internally but
never actually uses it, so remove it.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Wey-Yi Guy [Wed, 13 Jul 2011 18:13:46 +0000 (11:13 -0700)]
iwlagn: testmode fixed rate available for testmode only
Move tm_fixed_rate inside CONFIG_IWLWIFI_DEVICE_SVTOOL and only
available when the option is enable.
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Emmanuel Grumbach [Mon, 11 Jul 2011 10:14:37 +0000 (13:14 +0300)]
iwlagn: add comment to warn about WoWLAN in resume / suspend flows
WoWLAN may need the NIC even after suspend. One should not do anything to the
NIC in the bus level, since one cannot check whether WoWLAN is enabled or not.
Same for resume.
Add a simple comment to the code to warn about this.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Emmanuel Grumbach [Mon, 11 Jul 2011 08:18:48 +0000 (11:18 +0300)]
iwlagn: iwl_bus holds drv_data as void * instead of iwl_priv
The price to pay is the access to the log system. Therefore logs from bus layer
are sent by dev_printk instead of IWL_XXXX.
Rename bus->priv to bus->drv_data to make the separation even clearer.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Emmanuel Grumbach [Mon, 11 Jul 2011 07:48:51 +0000 (10:48 +0300)]
iwlagn: simplify the bus architecture
Call iwl_probe with a ready iwl_bus struct. This means that the bus layer
assigns the irq, dev and iwl_bus_ops pointers to iwl_bus before giving it to
iwl_probe.
The device specific struct is allocated together with the common iwl_bus struct
by the bus specific layer. The pointer to the aggregate struct is passed to the
upper layer that holds a pointer to iwl_bus instead of an embedded iw_bus.
The private data given to the PCI subsystem is now iwl_bus and not iwl_priv.
Provide bus_* inliners on the way in order to simplify the syntax.
Rename iwl-pci.h -> iwl-bus.h since it is bus agnostic and represent the
external of the bus layer.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Emmanuel Grumbach [Mon, 11 Jul 2011 05:51:04 +0000 (08:51 +0300)]
iwlagn: transport layer receives struct iwl_trans*
It still holds a pointer to iwl_priv. But hopefully this will disappear at some point.
Also add the multiple inclusion protection to iwl-trans.h that was forgotten.
Move iwl-trans structures to iwl-trans.h
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Emmanuel Grumbach [Sun, 10 Jul 2011 12:39:57 +0000 (15:39 +0300)]
iwlagn: move iwl_prepare_card_hw to the transport layer
This function is really related to the transport layer - move it.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Emmanuel Grumbach [Sun, 10 Jul 2011 12:30:15 +0000 (15:30 +0300)]
iwlagn: move more functions from the start flow to the transport layer
Basically all the nic_init flow should be in the transport layer.
iwl_prepare_card_hw will move to the transport too in a separate patch.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Emmanuel Grumbach [Sun, 10 Jul 2011 07:47:01 +0000 (10:47 +0300)]
iwlagn: SCD configuration for AMPDU moves to transport layer
All the configurations of the HW for AMPDU are now in the transport layer.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Wey-Yi Guy [Fri, 8 Jul 2011 21:29:48 +0000 (14:29 -0700)]
iwlagn: radio sensor offset in le16 format
For temperature offset calibration, send radio sensor offset in le16 format
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Wey-Yi Guy [Fri, 8 Jul 2011 21:29:47 +0000 (14:29 -0700)]
iwlagn: define valid init calibration mask
Use the valid calibration mask for init calibration
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Wey-Yi Guy [Fri, 8 Jul 2011 21:29:46 +0000 (14:29 -0700)]
iwlagn: remove legacy calibration command
IWL_PHY_CALIBRATE_DIFF_GAIN_CMD is for legacy device, remove it
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Wey-Yi Guy [Fri, 8 Jul 2011 21:29:45 +0000 (14:29 -0700)]
iwlagn: set correct calibration flag
Set calibration config flag for complete notification
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Emmanuel Grumbach [Sun, 3 Jul 2011 12:45:34 +0000 (15:45 +0300)]
iwlagn: kill iwlagn_setup_deferred_work
Since iwlagn_setup_deferred_work is always called, fold it into
iwl_setup_deferred_work. BT related works are setup by the new
bt_setup_deferred_work lib_ops.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.guy@intel.com>
Emmanuel Grumbach [Sun, 3 Jul 2011 12:45:34 +0000 (15:45 +0300)]
iwlagn: kill iwlagn_rx_handler_setup
Since iwlagn_rx_handler_setup is always called, fold it into
iwl_rx_handler_setup. BT related handlers are setup by the new
bt_rx_handler_setup lib_ops.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.guy@intel.com>
Emmanuel Grumbach [Thu, 7 Jul 2011 15:20:01 +0000 (18:20 +0300)]
iwlagn: add kick_nic API to transport layer
kick_nic means to remove the RESET bit from the embedded CPU
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.guy@intel.com>
Daniel Drake [Wed, 20 Jul 2011 16:53:56 +0000 (17:53 +0100)]
libertas: only enable mesh when interface is active
Previously, the mesh was running whenever the appropriate hardware
and firmware was present.
Now we only run the mesh when the interface is running.
Also simplifies interface management a little.
Signed-off-by: Daniel Drake <dsd@laptop.org>
Acked-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Daniel Drake [Wed, 20 Jul 2011 16:53:50 +0000 (17:53 +0100)]
libertas: mesh: misc cleanup
Remove unused blindlist code.
Mark a few items const and static where possible. Involved some
code re-ordering, but no code changes.
Signed-off-by: Daniel Drake <dsd@laptop.org>
Acked-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Andy Shevchenko [Wed, 20 Jul 2011 13:34:31 +0000 (16:34 +0300)]
wireless: mwifiex: print hw address via %pM
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Andy Shevchenko [Wed, 20 Jul 2011 13:34:30 +0000 (16:34 +0300)]
wireless: ath9k: use %pM to print MAC
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: "Luis R. Rodriguez" <lrodriguez@atheros.com>
Cc: ath9k-devel@lists.ath9k.org
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Andy Shevchenko [Wed, 20 Jul 2011 13:34:29 +0000 (16:34 +0300)]
wireless: rtlwifi: throw away MAC_FMT and use %pM instead
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Johannes Berg [Tue, 19 Jul 2011 22:52:16 +0000 (00:52 +0200)]
cfg80211: fix scan crash on single-band cards
commit
58389c69150e6032504dfcd3edca6b1975c8b5bc
Author: Johannes Berg <johannes.berg@intel.com>
Date: Mon Jul 18 18:08:35 2011 +0200
cfg80211: allow userspace to control supported rates in scan
made single-band cards crash since it would always
access all wiphy->bands[]. Fix this and reject any
attempts in the new helper ieee80211_get_ratemask()
to do the same, rejecting rates configuration for
unsupported bands.
Reported-by: Pavel Roskin <proski@gnu.org>
Tested-by: Pavel Roskin <proski@gnu.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Pavel Roskin [Tue, 19 Jul 2011 22:02:15 +0000 (18:02 -0400)]
carl9170: fix sparse warnings enabled by CONFIG_SPARSE_RCU_POINTER
Signed-off-by: Pavel Roskin <proski@gnu.org>
Acked-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Eliad Peller [Tue, 19 Jul 2011 10:14:42 +0000 (13:14 +0300)]
mac80211: check sta_info_get() return value
ieee80211_stop_rx_ba_session() was calling sta_info_get()
without rcu locking, and the return value was not
checked.
This resulted in the following panic:
[<
bf05726c>] (ieee80211_stop_rx_ba_session+0x0/0x60 [mac80211])
[<
bf0abd94>] (wl1271_event_handle+0x0/0xdc8 [wl12xx])
[<
bf0a7308>] (wl1271_irq+0x0/0x4a0 [wl12xx])
[<
c00c40a8>] (irq_thread+0x0/0x254)
[<
c00a7398>] (kthread+0x0/0x8c)
Signed-off-by: Eliad Peller <eliad@wizery.com>
Reviewed-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Eliad Peller [Tue, 19 Jul 2011 09:57:13 +0000 (12:57 +0300)]
cfg80211: enter psm when working as p2p_cli
cfg80211_netdev_notifier_call() is configuring psm in case
of NL80211_IFTYPE_STATION interface type (on NETDEV_UP).
do the same for NL80211_IFTYPE_P2P_CLIENT interface type.
Signed-off-by: Eliad Peller <eliad@wizery.com>
Reviewed-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Johannes Berg [Tue, 19 Jul 2011 08:39:53 +0000 (10:39 +0200)]
mac80211: sync driver before TX
In P2P client mode, the GO (AP) to connect to might
have periods of time where it is not available due
to powersave. To allow the driver to sync with it
and send frames to the GO only when it is available
add a new callback tx_sync (and the corresponding
finish_tx_sync). These callbacks can sleep unlike
the actual TX.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Pavel Roskin [Fri, 15 Jul 2011 00:21:55 +0000 (20:21 -0400)]
ath5k: merge ath5k_hw and ath5k_softc
Both ath5k_hw and ath5k_softc represent one instance of the hardware.
This duplication is historical and is not needed anymore.
Keep the name "ath5k_hw" for the merged structure and "ah" for the
variable pointing to it. "ath5k_hw" is shorter than "ath5k_softc", more
descriptive and more widely used.
Put the combined structure to ath5k.h where the old ath5k_softc used to
be. Move some code from base.h to ath5k.h as needed.
Remove memory allocation for struct ath5k_hw and the corresponding error
handling. Merge iobase and ah_iobase fields.
Signed-off-by: Pavel Roskin <proski@gnu.org>
Acked-by: Nick Kossifidis <mickflemm@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Rafał Miłecki [Sat, 16 Jul 2011 23:06:06 +0000 (01:06 +0200)]
b43: bcma: implement full core reset
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Rafał Miłecki [Sat, 16 Jul 2011 23:06:05 +0000 (01:06 +0200)]
bcma: allow enabling PLL
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Rafał Miłecki [Sat, 16 Jul 2011 23:06:04 +0000 (01:06 +0200)]
bcma: allow setting FAST clockmode for a core
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Rafał Miłecki [Sat, 16 Jul 2011 23:06:03 +0000 (01:06 +0200)]
bcma: trivial: add helpers for masking/setting
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Rafał Miłecki [Sat, 16 Jul 2011 16:43:36 +0000 (18:43 +0200)]
bcma: move define of BCMA_CLKCTLST register
Recent experiments have shown many cores share 0x1E0 register used for
clock management.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Rafał Miłecki [Mon, 18 Jul 2011 20:45:58 +0000 (22:45 +0200)]
b43: correctly display longer chipsets ids
Some of the newer Broadcom chipsets have longe names like BCM43224,
BCM43225, etc. However Broadcom decided to keep using u16 for storing
them. Use %X or %d depending on chip_id value to avoid BCMA8D8, etc.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Acked-by: Pavel Roskin <proski@gnu.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Johannes Berg [Mon, 18 Jul 2011 16:08:36 +0000 (18:08 +0200)]
mac80211: implement scan supported rates
Scanning currently uses the TX rate mask to
restrict the rate set, which is bogus. Make
it use the new set of rates from userspace.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Johannes Berg [Mon, 18 Jul 2011 16:08:35 +0000 (18:08 +0200)]
cfg80211: allow userspace to control supported rates in scan
Some P2P scans are not allowed to advertise
11b rates, but that is a rather special case
so instead of having that, allow userspace
to request the rate sets (per band) that are
advertised in scan probe request frames.
Since it's needed in two places now, factor
out some common code parsing a rate array.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Rafał Miłecki [Mon, 18 Jul 2011 00:13:23 +0000 (02:13 +0200)]
b43: HT-PHY: fix masks in radio ctl
Old masks were causing ugly, delayed lock ups.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Rafał Miłecki [Mon, 18 Jul 2011 00:01:30 +0000 (02:01 +0200)]
b43: bcma: read info about supported bands
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Rafał Miłecki [Mon, 18 Jul 2011 00:01:29 +0000 (02:01 +0200)]
b43: bcma: define 80211 core specific IO status bits
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Rafał Miłecki [Mon, 18 Jul 2011 00:01:28 +0000 (02:01 +0200)]
bcma: define IO status register
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Kalle Valo [Sun, 17 Jul 2011 09:13:56 +0000 (12:13 +0300)]
ieee80211: add few wmm tspec values
These are needed by ath6kl for parsing tspec status from an IE.
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Rafał Miłecki [Sun, 17 Jul 2011 09:00:59 +0000 (11:00 +0200)]
bcma: handle alternative SPROM location
Some cards do not use additional 0x30 offset for SPROM location. We do
not know the real condition for it yet, make it BCM4331 specific for
now.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Rafał Miłecki [Sun, 17 Jul 2011 08:30:34 +0000 (10:30 +0200)]
b43: HT-PHY: fix typo in 0x2059 radio init
Following operation was incorrectly translated:
radio_read(0x0011) -> 0xffff
radio_write(0x0011) <- 0xfff7
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Rafał Miłecki [Sun, 17 Jul 2011 08:30:33 +0000 (10:30 +0200)]
b43: HT-PHY: find channel entry with regs data
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Rafał Miłecki [Sun, 17 Jul 2011 08:30:32 +0000 (10:30 +0200)]
b43: HT-PHY: switch to channel after enabling radio
Also change the default channel to 11. This is the first channel closed
driver switches to.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Rafał Miłecki [Sat, 16 Jul 2011 16:27:55 +0000 (18:27 +0200)]
b43: use agent R/W ops for BCMA_IOCTL
BCMA_IOCTL is register in agent (AKA wrapper) core, we need to use
special R/W ops for it.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Rajkumar Manoharan [Sun, 17 Jul 2011 06:08:49 +0000 (11:38 +0530)]
ath9k: Fix some smatch warnings
drivers/net/wireless/ath/ath9k/hif_usb.c +135 hif_usb_mgmt_cb(6) warn:
variable dereferenced before check 'cmd'
drivers/net/wireless/ath/ath9k/btcoex.c +77 ath9k_hw_init_btcoex_hw(38)
error: buffer overflow 'ah->hw_gen_timers.gen_timer_index' 32 <=
2009813776
Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Luciano Coelho [Sun, 17 Jul 2011 07:06:34 +0000 (10:06 +0300)]
MAINTAINERS: change maintainer of the wl1251 driver
Kalle Valo has asked me to take over the maintenance of the wl1251
driver. Thanks Kalle for all his work on the wl1251 driver, I'll try
to keep up with his good work from now on.
At the same time, update the Web URL to something more specific.
There's not much in that page, but we will try to update it soon.
Signed-off-by: Luciano Coelho <coelho@ti.com>
Acked-by: Kalle Valo <kvalo@adurom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Rajkumar Manoharan [Sun, 17 Jul 2011 06:13:02 +0000 (11:43 +0530)]
ath9k: Fix sparse warnings
drivers/net/wireless/ath/ath9k/init.c:199:21: warning: context imbalance
in 'ath9k_reg_rmw' - different lock contexts for basic block
drivers/net/wireless/ath/ath9k/xmit.c:1175:31: warning: context
imbalance in 'ath_drain_txq_list' - unexpected unlock
drivers/net/wireless/ath/ath9k/xmit.c:2047:23: warning: context
imbalance in 'ath_tx_process_buffer' - unexpected unlock
drivers/net/wireless/ath/ath9k/ar9003_eeprom.c:3041:24: warning: cast to
restricted __le32
Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Rafał Miłecki [Sat, 16 Jul 2011 23:15:18 +0000 (01:15 +0200)]
b43: bus: drop inline from SSB functions
We use all that functions by pointers only. This forces compiler to
create additional duplicated functions that are not inline.
Noticed by Michael in similar bcma code.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Christian Lamparter [Sat, 16 Jul 2011 15:30:19 +0000 (17:30 +0200)]
carl9170: set beacon xmit power to the max
Harshal Chhaya discovered during network tests, that
several of his clients dropped-off the network. The
captured packets shows that the beacons sent by the
AP are at a much lower power than the other data
packets.
The reason for this mishap: The driver never updated
the beacon phy register, so all beacons were always
sent at the lowest power.
Reference: http://marc.info/?l=linux-wireless&m=
131067225105801
Reported-by: Harshal Chhaya <harshal@gmail.com>
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Christian Lamparter [Sat, 16 Jul 2011 15:25:14 +0000 (17:25 +0200)]
carl9170: move beacon_update into tx.c
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Christian Lamparter [Sat, 16 Jul 2011 15:21:01 +0000 (17:21 +0200)]
carl9170 firmware: update firmware headers
* reserves feature bit for CCA counters
* extends hardware register file definitions
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Pavel Roskin [Fri, 15 Jul 2011 23:06:46 +0000 (19:06 -0400)]
ath9k: use ath_opmode_to_string()
Signed-off-by: Pavel Roskin <proski@gnu.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Pavel Roskin [Fri, 15 Jul 2011 23:06:40 +0000 (19:06 -0400)]
ath9k: remove defines in reg.h that exist in ../reg.h
Signed-off-by: Pavel Roskin <proski@gnu.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Pavel Roskin [Fri, 15 Jul 2011 23:06:33 +0000 (19:06 -0400)]
ath9k: use get_unaligned_{b16, le16, le32} where possible
Signed-off-by: Pavel Roskin <proski@gnu.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Pavel Roskin [Fri, 15 Jul 2011 23:06:27 +0000 (19:06 -0400)]
ath: use get_unaligned_le{16,32} in ath_hw_keysetmac()
Signed-off-by: Pavel Roskin <proski@gnu.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Rafał Miłecki [Thu, 14 Jul 2011 19:49:21 +0000 (21:49 +0200)]
bcma: extract SPROM rev 9 the same way as rev 8
SPROM rev 9 was discovered on 14e4:4331, it seems to have very similar
layout to rev 8 one. Use the same extracting function until we find some
differences.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Rafał Miłecki [Thu, 14 Jul 2011 19:49:19 +0000 (21:49 +0200)]
bcma: cc: set GPIOTIMER register
We use value supplied via SPROM, or default 10:90 as fallback.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Rafał Miłecki [Thu, 14 Jul 2011 19:49:18 +0000 (21:49 +0200)]
ssb: SPROM: add LED duty cycle fields
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Eliad Peller [Thu, 14 Jul 2011 17:29:42 +0000 (20:29 +0300)]
mac80211: reconfigure tx on device reconfiguration
Add tx_conf array to save the current tx queues
configuration, and reconfig it on resume (ieee80211_reconfig).
On resume, the driver is being reconfigured. Without
reconfiguring the tx queues as well, the driver might
configure the device to use wrong ac params (e.g. ps-poll
instead of uapsd).
Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Emmanuel Grumbach [Thu, 7 Jul 2011 12:50:10 +0000 (15:50 +0300)]
iwlagn: add tx start API to transport layer
tx start will start the tx queues: basically configure the SCD
Remove the IWLAGN prefix to SCD defines on the way.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.guy@intel.com>
Emmanuel Grumbach [Mon, 11 Jul 2011 14:44:57 +0000 (07:44 -0700)]
iwlagn: move all the ICT related functions to iwl-trans-rx-pcie.c
Since the ICT is transport related, move all its functions to the transport
layer.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Emmanuel Grumbach [Thu, 7 Jul 2011 11:37:26 +0000 (14:37 +0300)]
iwlagn: move iwlagn_stop_device to transport layer
Since iwlagn_stop_device was the only caller to the rx_stop / tx_stop,
these two don't need to be API any more.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.guy@intel.com>
Emmanuel Grumbach [Mon, 11 Jul 2011 14:39:46 +0000 (07:39 -0700)]
iwlagn: move tx transport functions to iwl-trans-tx-pcie.c
There are still a few functions here and there that should be
put in the transport layer. Mainly the functions that are related to the reclaim flow.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Emmanuel Grumbach [Mon, 11 Jul 2011 14:35:34 +0000 (07:35 -0700)]
iwlagn: move rx transport functions to iwl-trans-rx-pcie.c
Also create a new file: iwl-trans-int-pcie.h which will include
the non static functions that are shared among the current pcie transport layer.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Fry, Donald H [Thu, 7 Jul 2011 22:24:07 +0000 (15:24 -0700)]
iwlagn: remove indirection for iwlagn_hw_valid_rtc_data_addr
Not needed since the driver split.
Signed-off-by: Don Fry <donald.h.fry@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Wey-Yi Guy [Thu, 7 Jul 2011 19:24:46 +0000 (12:24 -0700)]
iwlagn: calibration bitmap
Define bitmap for calibration
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Hsu, Kenny [Thu, 7 Jul 2011 10:10:27 +0000 (03:10 -0700)]
iwlagn: set default of uCode ownership to driver
The driver should take the ownership of the uCode as default setting
for later operations after interface up.
Signed-off-by: Kenny Hsu <kenny.hsu@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Johannes Berg [Thu, 7 Jul 2011 12:11:51 +0000 (05:11 -0700)]
iwlagn: simplify TX flags assignments
The first assignment of TX_CMD_FLG_SEQ_CTL_MSK for
ack-expected mgmt frames is overwritten later in
the function, so it's useless. Also, probe response
frames, BACK request and others there are mutually
exclusive so can be moved into an else branch.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Emmanuel Grumbach [Thu, 7 Jul 2011 16:25:51 +0000 (09:25 -0700)]
iwlagn: add comment to tx and get_tx_cmd in iwl_trans_ops
Those comments were missed in a previous commit.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
projects / GitHub / LineageOS / android_kernel_motorola_exynos9610.git / log