[SCSI] add scsi_mode_select to scsi_lib.c

This complements the scsi_mode_sense() function

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

[SCSI] 3ware 9000 add big endian support

The attached patch updates the 3ware 9000 driver:

- Fix 9550SX pchip reset timeout.
- Add big endian support.

Signed-off-by: Adam Radford <linuxraid@amcc.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

[SCSI] qla2xxx: update MAINTAINERS

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

[SCSI] scsi: move target_destroy call

This patch moves the calling of target_destroy next to the list_del. This
closed a race being seen while doing a device add on the aic7xxx.

Signed-off-by: Mike Anderson <andmike@us.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

[SCSI] fusion - bump version

version bump

Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

[SCSI] fusion - expander hotplug suport in mptsas module

This adds support for hot adding and removing
expanders, and its associated attached devices.
When there is a change in topology,
the fusion firmware sends the
MPI_EVENT_SAS_DISCOVERY event to the driver.
The driver will read firmware config pages
to determine what changes took place, and refresh
drivers view of the world stored in ioc->sas_topology.

Here is the details of the action the driver does:

(1) Expander Added :  The mptsas_discovery_work
workqueue is called.  Config pages read, and
ioc->sas_topology is refreshed.  The sas_phy_add()
is called for each phy of the expander.  The
expanders attached devices are added via
sas_rphy_add().  Added end devices are handled within
the MPT_ADD_DEVICE logic in  mptsas_hotplug_work
workqueue.

(2) Expander Delete : The sas_rphy_delete() will be
called for the top most compenent of the parent that the
expander is attached to.  The sas_rphy_delete call
will delete all the children phys, rphys, and end devices.
This is handled from mptsas_discovery_work workqueue.

Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

[SCSI] fusion - exposing raid components in mptsas

Suppport for exposing hidden raid components
for sg interface. The sdev->no_uld_attach flag
will set set accordingly.

The sas module supports adding/removing raid
volumes using online storage management application
interface.

This patch rely's on patch's provided to me
by Christoph Hellwig, that exports device_reprobe.
I will post those patch's on behalf of Christoph.

Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

[SCSI] fusion - memory leak, and initializing fields

Changelog:
(1) fix memory leak: p->phy_info
(2) initialize device_info and port_info data fields
(3) initialize the hba firmware handle
(4) initialize phy_id for attached phy_info data fields
(5) initialize attached phy_info data fields

Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

[SCSI] fusion - exclosure misspelled

exclosure should be enclosure

Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

[SCSI] fusion - cleanup mptsas event handling functions

Cleanup of mptsas firmware event handlers.

Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

[SCSI] fusion - removing target_id/bus_id from the VirtDevice structure

It makes no sense in keeping the target_id and bus_id
in the VirtDevice structure, when it can be obtained
from the VirtTarget structure.

In addition, this patch fix's couple compilation bugs
in mptfc.c when MPT_DEBUG_FC is enabled. This
provided by Micheal Reed.

Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

[SCSI] fusion - static fix's

Patch previously provided from Adrian Bunk <bunk@stusta.de>,
moving some functions to static.  This is already in
the -mm tree.

Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

[SCSI] fusion - move some debug firmware event debug msgs to verbose level

Created a debug level MPT_DEBUG_VERBOSE_EVENTS.
Moving some of the more vebose debug messages
for firwmare events into new debug level.  Also
added some more firmware events descriptions.

Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

[SCSI] fusion - loginfo header update

This header is provided to better understand
loginfo codes returned by the mpt fusion firmware.

Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

[SCSI] add scsi_reprobe_device

Original from Christoph Hellwig and Eric Moore.  This version exports
the scsi_reprobe_device() function as an inline.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

[SCSI] megaraid_sas: fix extended timeout handling

Replace the eh_timed_out method usage with setting sdev->timeout in
slave_configure.  Also only use the extended timeout for raid volumes,
physical devices shouldn't need it.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

Merge ../linux-2.6

[SCSI] drivers/base/bus.c - export reprobe

Adding support for exposing hidden raid components for sg
interface. The sdev->no_uld_attach flag will set set accordingly.

The sas module supports adding/removing raid volumes using online
storage management application interface.

This patch was provided to me by Christoph Hellwig.

Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

[SCSI] add preliminary expander support to the sas transport class

This patch makes expanders appear as labelled objects with properties in
the SAS tree.

I've also modified the phy code to make expander phys appear labelled by
host number, expander number and phy index.

So, for my current config, you see something like this in sysfs:

/sys/class/scsi_host/host1/device/phy-1:4/expander-1:0/phy-1-0:12/rphy-1:0-12/target1:0:1

And the expander properties are:

jejb@sparkweed> cd /sys/class/sas_expander/expander-1\:0/
jejb@sparkweed> for f in *; do echo -n $f ": "; cat $f; done
component_id : 29024
component_revision_id : 4
component_vendor_id : VITESSE
device : cat: device: Is a directory
level : 0
product_id : VSC7160 Eval Brd
product_rev : 4
uevent : cat: uevent: Permission denied
vendor_id : VITESSE

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

[PATCH] Plug kdump shutdown race window

lapic_shutdown() re-enables interrupts which is un-desirable for panic
case, so use local_irq_save() and local_irq_restore() to keep the irqs
disabled for kexec on panic case, and close a possible race window while
kdump shutdown as shown in this stack trace

   -- BUG: spinlock lockup on CPU#1, bash/4396, c52781a0
   [<c01c1870>] _raw_spin_lock+0xb7/0xd2
   [<c029e148>] _spin_lock+0x6/0x8
   [<c011b33f>] scheduler_tick+0xe7/0x328
   [<c0128a7c>] update_process_times+0x51/0x5d
   [<c0114592>] smp_apic_timer_interrupt+0x4f/0x58
   [<c01141ff>] lapic_shutdown+0x76/0x7e
   [<c0104d7c>] apic_timer_interrupt+0x1c/0x30
   [<c01141ff>] lapic_shutdown+0x76/0x7e
   [<c0116659>] machine_crash_shutdown+0x83/0xaa
   [<c013cc36>] crash_kexec+0xc1/0xe3
   [<c029e148>] _spin_lock+0x6/0x8
   [<c013cc22>] crash_kexec+0xad/0xe3
   [<c0215280>] __handle_sysrq+0x84/0xfd
   [<c018d937>] write_sysrq_trigger+0x2c/0x35
   [<c015e47b>] vfs_write+0xa2/0x13b
   [<c015ea73>] sys_write+0x3b/0x64
   [<c0103c69>] syscall_call+0x7/0xb

Signed-off-by: Maneesh Soni <maneesh@in.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Revert "[PATCH] x86-64: Fix up handling of non canonical user RIPs"

This reverts commit c33d4568aca9028a22857f94f5e0850012b6444b.

Andrew Clayton and Hugh Dickins report that it's broken for them and
causes strange page table and slab corruption, and spontaneous reboots.

Let's get it right next time.

Cc: Andrew Clayton <andrew@rootshell.co.uk>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] EDAC: disable sysfs interface

- Disable the EDAC sysfs code.  The sysfs interface that EDAC presents to
  user space needs more thought, and is likely to change substantially.
  Therefore disable it for now so users don't start depending on it in its
  current form.

- Disable the default behavior of calling panic() when an uncorrectible
  error is detected (since for now, there is no sysfs interface that allows
  the user to configure this behavior).

Signed-off-by: David S. Peterson <dsp@llnl.gov>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] NLM: Ensure we do not Oops in the case of an unlock

In theory, NLM specs assure us that the server will only reply LCK_GRANTED or
LCK_DENIED_GRACE_PERIOD to our NLM_UNLOCK request.

In practice, we should not assume this to be the case, and the code will
currently Oops if we do.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] SUNRPC: Fix potential deadlock in RPC code

In rpc_wake_up() and rpc_wake_up_status(), it is possible for the call to
__rpc_wake_up_task() to fail if another thread happens to be calling
rpc_wake_up_task() on the same rpc_task.

Problem noticed by Bruno Faccini.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] NFSv4: fix mount segfault on errors returned that are < -1000

It turns out that nfs4_proc_get_root() may return raw NFSv4 errors instead of
mapping them to kernel errors.  Problem spotted by Neil Horman
<nhorman@tuxdriver.com>

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] SUNRPC: fix a NULL pointer dereference in net/sunrpc/clnt.c

The Coverity checker spotted this possible NULL pointer dereference in
rpc_new_client().

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] NFS: Fix a potential panic in O_DIRECT

Based on an original patch by Mike O'Connor and Greg Banks of SGI.

Mike states:

A normal user can panic an NFS client and cause a local DoS with
'judicious'(?) use of O_DIRECT.  Any O_DIRECT write to an NFS file where the
user buffer starts with a valid mapped page and contains an unmapped page,
will crash in this way.  I haven't followed the code, but O_DIRECT reads with
similar user buffers will probably also crash albeit in different ways.

Details: when nfs_get_user_pages() calls get_user_pages(), it detects and
correctly handles get_user_pages() returning an error, which happens if the
first page covered by the user buffer's address range is unmapped.  However,
if the first page is mapped but some subsequent page isn't, get_user_pages()
will return a positive number which is less than the number of pages requested
(this behaviour is sort of analagous to a short write() call and appears to be
intentional).  nfs_get_user_pages() doesn't detect this and hands off the
array of pages (whose last few elements are random rubbish from the newly
allocated array memory) to it's caller, whence they go to
nfs_direct_write_seg(), which then totally ignores the nr_pages it's given,
and calculates its own idea of how many pages are in the array from the user
buffer length.  Needless to say, when it comes to transmit those uninitialised
page* pointers, we see a crash in the network stack.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] Fix sigaltstack corruption among cloned threads

This patch fixes alternate signal stack corruption among cloned threads
with CLONE_SIGHAND (and CLONE_VM) for linux-2.6.16-rc6.

The value of alternate signal stack is currently inherited after a call of
clone(...  CLONE_SIGHAND | CLONE_VM).  But if sigaltstack is set by a
parent thread, and then if multiple cloned child threads (+ parent threads)
call signal handler at the same time, some threads may be conflicted -
because they share to use the same alternative signal stack region.
Finally they get sigsegv.  It's an undesirable race condition.  Note that
child threads created from NPTL pthread_create() also hit this conflict
when the parent thread uses sigaltstack, without my patch.

To fix this problem, this patch clears the child threads' sigaltstack
information like exec().  This behavior follows the SUSv3 specification.
In SUSv3, pthread_create() says "The alternate stack shall not be inherited
(when new threads are initialized)".  It means that sigaltstack should be
cleared when sigaltstack memory space is shared by cloned threads with
CLONE_SIGHAND.

Note that I chose "if (clone_flags & CLONE_SIGHAND)" line because:
  - If clone_flags line is not existed, fork() does not inherit sigaltstack.
  - CLONE_VM is another choice, but vfork() does not inherit sigaltstack.
  - CLONE_SIGHAND implies CLONE_VM, and it looks suitable.
  - CLONE_THREAD is another candidate, and includes CLONE_SIGHAND + CLONE_VM,
    but this flag has a bit different semantics.
I decided to use CLONE_SIGHAND.

[ Changed to test for CLONE_VM && !CLONE_VFORK after discussion --Linus ]

Signed-off-by: GOTO Masanori <gotom@sanori.org>
Cc: Roland McGrath <roland@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Acked-by: Linus Torvalds <torvalds@osdl.org>
Cc: Ulrich Drepper <drepper@redhat.com>
Cc: Jakub Jelinek <jakub@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] macintosh: correct AC Power info in /proc/pmu/info

Report AC Power present in /proc/pmu/info if there is no battery.

Signed-off-by: Olaf Hering <olh@suse.de>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>,
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] Restore tuning capabilities in V4L2 MXB driver

The behaviour of the all-in-one Video4Linux tuner driver apparently
changed.  It now wants to know the tv standard, otherwise it refuses to
tune.

Restore tuning functionality in my driver for the "Multimedia eXtension
Board".  The all-in-one tuner driver apparently changed its behaviour.

Signed-off-by: Michael Hunold <hunold@linuxtv.org>
Cc: Mauro Carvalho Chehab <mchehab@infradead.org>
Cc: Johannes Stezenbach <js@linuxtv.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] mtd_dataflash, fix block vs page erase

Fix a bug in the block-erase optimization for Dataflash; it was using block
erase even for smaller segments that need page erase.

That wouldn't matter for JFFS2, which never erases less than one block
(sometimes several blocks), but for other callers it might.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Acked-by: David Woodhouse <dwmw2@infradead.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[TCP]: Fix zero port problem in IPv6

When we link a socket into the hash table, we need to make sure that we
set the num/port fields so that it shows us with a non-zero port value
in proc/netlink and on the wire.  This code and comment is copied over
from the IPv4 stack as is.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

[SCSI] FC transport : Avoid device offline cases by stalling aborts until device unblocked

This moves the eh_timed_out functionality from the scsi_host_template
to the transport_template. Given that this is now a transport function,
the EH_RESET_TIMER case no longer caps the timer reschedulings. The
transport guarantees that this is not an infinite condition.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

[PATCH] x86-64: Fix up handling of non canonical user RIPs

EM64T CPUs have somewhat weird error reporting for non canonical RIPs in
SYSRET.

We can't handle any exceptions there because the exception handler would
end up running on the user stack which is unsafe.

To avoid problems any code that might end up with a user touched pt_regs
should return using int_ret_from_syscall.  int_ret_from_syscall ends up
using IRET, which allows safe exceptions.

Cc: Ernie Petrides <petrides@redhat.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[NETFILTER]: arp_tables: fix NULL pointer dereference

The check is wrong and lets NULL-ptrs slip through since !IS_ERR(NULL)
is true.

Coverity #190

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

[IPV4/6]: Fix UFO error propagation

When ufo_append_data fails err is uninitialized, but returned back.
Strangely gcc doesn't notice it.

Coverity #901 and #902

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

[TCP]: tcp_highspeed: fix AIMD table out-of-bounds access

Covertiy #547

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

[NETLINK]: Fix use-after-free in netlink_recvmsg

The skb given to netlink_cmsg_recv_pktinfo is already freed, move it up
a few lines.

Coverity #948

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

[XFRM]: Fix leak in ah6_input

tmp_hdr is not freed when ipv6_clear_mutable_options fails.

Coverity #650

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

[NET_SCHED]: act_api: fix skb leak in error path

The skb is allocated by the function, so it needs to be freed instead
of trimmed on overrun.

Coverity #614

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

[NETFILTER]: nfnetlink_queue: fix possible NULL-ptr dereference

Fix NULL-ptr dereference when a config message for a non-existant
queue containing only an NFQA_CFG_PARAMS attribute is received.

Coverity #433

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'upstream-fixes' of /linux/kernel/git/jgarzik/libata-dev

* 'upstream-fixes' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev:
  [PATCH] ahci: fix NULL pointer dereference detected by Coverity

Merge master.kernel.org:/home/rmk/linux-2.6-arm

* master.kernel.org:/home/rmk/linux-2.6-arm:
  [ARM] iwmmxt thread state alignment
  [ARM] 3350/1: Enable 1-wire on ARM
  [ARM] 3356/1: Workaround for the ARM1136 I-cache invalidation problem
  [ARM] 3355/1: NSLU2: remove propmt depends
  [ARM] 3354/1: NAS100d: fix power led handling
  [ARM] Fix muldi3.S

[ARM] iwmmxt thread state alignment

This patch removes the reliance of iwmmxt on hand coded alignments.
Since thread_info is always 8K aligned, specifying that fpstate is
8-byte aligned achieves the same effect without needing to resort
to hand coded alignments.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[SCSI] mptscsih: remove unused page 1 setting function

It was actually rendered unused by the move to the spi transport
class, but never taken out.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

[SCSI] fix minor problem in spi transport message functions

The check for a one byte message should be msg[0] == 0x55 not msg == 0x55

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

[SCSI] sim710: fix a NULL pointer dereference

This patch fixes a NULL pointer dereference spotted by the Coverity
checker.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

[SCSI] ibmmca: fix a NULL pointer dereference

The variable was dereferenced only if it was NULL (sic)...

Spotted by the Coverity checker.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

[SCSI] dmx3191d: fix a NULL pointer dereference

This patch fixes a NULL pointer dereference spotted by the Coverity
checker.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

[SCSI] NCR_D700: fix a NULL dereference

The Coverity checker spotted this NULL dereference.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

[SCSI] Missing names from SPI3, SPI4 and SPI5

Add several missing messages from SPI3, SPI4 and SPI5:
 - Terminate Process
 - Continue Task
 - Target Transfer Disable
 - Clear ACA
 - LUN Reset
 - ACA
 - QAS Request
Rename some older commands to their SPI5 names:
 - Command Complete -> Task Complete
 - Abort -> Abort Task Set
 - Bus device Reset -> Target Reset
 - Clear Queue -> Clear Task Set

Change spi_print_msg() to always consume one byte, even if we don't
recognise it.  That allows drivers to call it in a loop to print all
messages.

Signed-off-by: Matthew Wilcox <matthew@wil.cx>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

[SCSI] qla2xxx: Firmware updates.

Resync with latest 23xx firmware -- 3.03.20.
Resync with latest 24xx firmware -- 4.00.18.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

[SCSI] qla2xxx: Remove legacy ISP6312 firmware loader.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

[SCSI] qla2xxx: Correct FCAL login retry logic for ISP24xx.

ISP24XX FW does not support Mbx 0x74 ie Login Local Port.
Added the equivalent code for ISP24XX ie to relogin in non
fabric case for ISP24XX use login iocb.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

[SCSI] qla2xxx: Further restrict ZIO mode support.

Only support ZIO mode 6 on specific ISP types.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

[SCSI] qla2xxx: Add VPD sysfs attribute.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

[SCSI] qla2xxx: Correct swing/emphasis settings on ISP24xx.

Reserved-bit 15 must set when updating the swing/emphasis values.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

[SCSI] qla2xxx: NVRAM id-list updates.

Resync with latest NVRAM subsystem ID list.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

[SCSI] qla2xxx: Consolidate ISP63xx handling.

As new 23xx firmware will accomidate ISP63xx types.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

[SCSI] qla2xxx: Add ISP54xx support.

Chip is similar in form to our ISP24xx offering.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

[SCSI] qla2xxx: Convert IS_QLA*() defines to bit-operations.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

[SCSI] fix two leaks in scsi_alloc_sdev failure paths

If the scsi_alloc_queue or the slave_alloc calls in scsi_alloc_device fail,
we forget to release the locally allocated sdev on the failure path.

Coverity #609

Signed-off-by: Dave Jones <davej@redhat.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

[SCSI] Make sgiwd93_detect and sgiwd93_detect static.

Nothing outside sgiwd93.c references them.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

[SCSI] drivers/scsi/FlashPoint.c: don't use parenthesis with "return"

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

[SCSI] drivers/scsi/FlashPoint.c: Lindent

It's much, much more readable now.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

[SCSI] drivers/scsi/FlashPoint.c: untypedef struct SCCBcard

* struct SCCBcard => struct sccb_card
* PSCCBcard => struct sccb_card *
* SCCBCARD => struct sccb_card

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

[SCSI] drivers/scsi/FlashPoint.c: untypedef struct NVRAMInfo

* struct NVRAMInfo => struct nvram_info
* PNVRamInfo => struct nvram_info *
* NVRAMINFO => struct nvram_info

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

[SCSI] drivers/scsi/FlashPoint.c: untypedef struct SCCBMgr_tar_info

* struct SCCBMgr_tar_info => struct sccb_mgr_tar_info
* PSCCBMgr_tar_info => struct sccb_mgr_tar_info *
* SCCBMGR_TAR_INFO => struct sccb_mgr_tar_info

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

[SCSI] drivers/scsi/FlashPoint.c: untypedef struct SCCBMgr_info

* struct SCCBMgr_info => struct sccb_mgr_info
* PSCCBMGR_INFO => struct sccb_mgr_info *
* SCCBMGR_INFO => struct sccb_mgr_info

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

[SCSI] drivers/scsi/FlashPoint.c: untypedef struct _SCCB

* struct _SCCB => struct sccb
* PSCCB => struct sccb *
* SCCB => struct sccb

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

[SCSI] drivers/scsi/FlashPoint.c: use standard fixed size types

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

[SCSI] drivers/scsi/FlashPoint.c: remove ushort_ptr

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

[SCSI] drivers/scsi/FlashPoint.c: remove ULONG

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

[SCSI] drivers/scsi/FlashPoint.c: remove UINT

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

[SCSI] drivers/scsi/FlashPoint.c: remove USHORT

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

[SCSI] drivers/scsi/FlashPoint.c: remove UCHAR

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

[SCSI] drivers/scsi/FlashPoint.c: remove trivial wrappers

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

[SCSI] drivers/scsi/FlashPoint.c: remove unused things

* Remove unused #define's
* Remove unused typedefs.
* Remove prototypes for non-existing functions.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

[SCSI] MODULE_ALIAS_{BLOCK,CHAR}DEV_MAJOR for drivers/scsi

Add device-major aliases in drivers/scsi, allowing kmod autoload:

MODULE_ALIAS_CHARDEV_MAJOR(SCSI_CHANGER_MAJOR)
MODULE_ALIAS_CHARDEV_MAJOR(OSST_MAJOR)
MODULE_ALIAS_CHARDEV_MAJOR(SCSI_TAPE_MAJOR)
MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_CDROM_MAJOR)
MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISKN_MAJOR)

Signed-off-by: Andrew Morton <akpm@osdl.org>
Acked-by: Kai Makisara <kai.makisara@kolumbus.fi>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

[SCSI] aic79xx: Avoid renegotiation on inquiry

Because of some quirk in the SCSI spec the aic79xx driver chose to
force a renegotiation when sending an inquiry. This should better
be handled by the upper layers if required at all.

Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

[SCSI] aic79xx: use BIOS settings

This patch fixes the aic79xx driver to properly respond to BIOS
settings.

Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

[SCSI] aic79xx: Invalid Sequencer interrupt occured

On certain systems the driver seems to hit upon some
"scsi0: Invalid Sequencer interrupt occurred." problem and dumps card state.
According to Adaptec engineers this message is harmless. So as not to
confuse user we can as well disable the internal card state dump and
just print out the message itself.

Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

[SCSI] aic79xx: Update error recovery

This patch updates the error recovery. Routines for TARGET RESET
and ABORT COMMAND are split up as the logic is quite dissimilar.

Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

[SCSI] aic79xx: Remove dead code

Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

[SCSI] aic79xx: use tcq functions

This patch converts aic79xx to use the midlayer-supplied tcq
functions.

We also set the queuedepth to '1' if tcq is disabled; the
aic79xx driver gets confused otherwise. Will set it back to
'2' once I figure out how to queue requests in the driver.

Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

[SCSI] aic79xx: remove qfrozen

This patch removes the need for platform_data->qfrozen.
We're now using complete() instead of semaphores thus
simplifying ahd_freeze_simq() quite a lot.
This also fixes some deadlocks in the recovery code (again).

Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

[SCSI] lpfc 8.1.4 : Change version number to 8.1.4

Change version number to 8.1.4

Signed-off-by: James Smart <James.Smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

[SCSI] lpfc 8.1.4 : Two misc fixes

Two misc fixes:
 - Fix deadlock caused by return with host_lock held in lpfc_findnode_did
 - Initialize all fields of the allocated mail box structure to zero.
   Was causing some sysfs mailbox commands to fail immediately after load.

Signed-off-by: James Smart <James.Smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

[SCSI] lpfc 8.1.4 : Introduce lpfc_reset_barrier() function for resets on dual channel adapters

Introduce lpfc_reset_barrier() function for resets on dual channel adapters

Workaround for a hardware errata on dual channel asics. There is a
potential for the chip to lock up on a reset if a shared dma engine is in
use. The (ugly) work around requires a reset process which uses a mailbox
command to synchronize the independent channels prior to the reset to
avoid the issue. Unfortunately, the timing windows required to ensure this
workaround succeeds are very specific, meaning we can't release the cpu
during the barrier.

Signed-off-by: James Smart <James.Smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

[SCSI] lpfc 8.1.4 : Fixed a timer panic due to timer firing after freeing ndlp

Fixed a timer panic due to timer firing after freeing ndlp

Signed-off-by: James Smart <James.Smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

[SCSI] lpfc 8.1.4 : Fixed RSCN handling when a PLOGI is in retry

Fixed RSCN handling when a PLOGI is in retry.

Signed-off-by: James Smart <James.Smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

[SCSI] lpfc 8.1.4 : Fix Discovery processing for NPorts that change their NPortId on the fly

Fix Discovery processing for NPorts that change their NPortId on the fly
due to a cable swap.

Signed-off-by: James Smart <James.Smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

[SCSI] i2o: fix memory leak in i2o_exec_lct_modified

i2o_exec_lct_modified() does not release memory allocated for work_struct.

Signed-off-by: Vasily Averin <vvs@sw.ru>
Although your patch is the same, i've rewritten it a little bit for
naming consistency in the I2O driver.

Acked-by: Markus Lidel <Markus.Lidel@shadowconnect.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

[SCSI] wd33c93: Fix missing prototypes by including <linux/interrupt.h>.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

[TCP]: Fix tcp_tso_should_defer() when limit>=65536

That's >= a full sized TSO frame, so we should always
return 0 in that case.

Based upon a report and initial patch from Lachlan
Andrew, final patch suggested by Herbert Xu.

Signed-off-by: David S. Miller <davem@davemloft.net>

[NETFILTER]: Fix wrong option spelling in Makefile for CONFIG_BRIDGE_EBT_ULOG

Signed-off-by: Gregor Maier <gregor@net.in.tum.de>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

[IPV6]: fix ipv6_saddr_score struct element

The scope element in the ipv6_saddr_score struct used in
ipv6_dev_get_saddr() is an unsigned integer, but __ipv6_addr_src_scope()
returns a signed integer (and can return -1).

Signed-off-by: Brian Haley <brian.haley@hp.com>
Acked-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

[TG3] tg3_bus_string(): remove dead code

The Coverity checker spotted this dead code (note that (clock_ctrl == 7)
is already handled above).

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

[TUN]: Fix leak in tun_get_user()

We're leaking an skb in a failure path in this function.

Coverity #632
Signed-off-by: Dave Jones <davej@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'master'