drm/i915/gvt: Fix alignment for GTT allocation

We need to properly setup alignment for GTT start/end/size
as required. Fixed warning from i915 gem.

Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

drm/i915/gvt: fix crash at function release_shadow_wa_ctx

In function dispatch_workload(), if it fail before calling
intel_gvt_scan_and_shadow_wa_ctx(), the indirect ctx will
not be shadowed so no cleaup need. wa_ctx->indirect_ctx.obj
indicate whether indirect_ctx is shadowed. The obj is null
if it is unshadowed.

BUG: unable to handle kernel NULL pointer dereference at
00000000000001a0
IP: complete_execlist_workload+0x2c9/0x3e0 [i915]
Oops: 0002 [#1] SMP
task: ffff939546d2d880 task.stack: ffffbd9b82ac4000
RIP: 0010:complete_execlist_workload+0x2c9/0x3e0 [i915]
RSP: 0018:ffffbd9b82ac7dd8 EFLAGS: 00010202
RAX: 0000000000000000 RBX: ffff9393c725b540 RCX: 0000000000000006
RDX: 0000000000000007 RSI: 0000000000000202 RDI: ffff939559c8dd00
RBP: ffffbd9b82ac7e18 R08: 0000000000000001 R09: 000000000120dd8f
R10: 0000000000000000 R11: 000000000120dd8f R12: ffff9393c725b540
R13: ffff9393c725b618 R14: ffffbd9b81f0d000 R15: ffff939520e0e000
FS:  0000000000000000(0000) GS:ffff939559c80000(0000)
knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000000001a0 CR3: 000000043d664000 CR4: 00000000003426e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 workload_thread+0x312/0xd70 [i915]
 ? __wake_up_sync+0x20/0x20
 ? wake_atomic_t_function+0x60/0x60
 kthread+0x101/0x140

Signed-off-by: Changbin Du <changbin.du@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

drm/i915/gvt: enable IOMMU for gvt

gvt driver has a check which doesn't allow to use gvt when host
gpu iommu is enabled. This check can be removed after enable the
iommu support in gvt

Signed-off-by: Chuanxiao Dong <chuanxiao.dong@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

drm/i915/gvt: map pfn for PTE entry in kvm

When host i915 iommu enabled, gvt needs to use a mapped pfn in PTE entry
So before kvm returns the pfn, map this pfn and return the mapped address
which is so called iova.

Signed-off-by: Chuanxiao Dong <chuanxiao.dong@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

drm/i915/gvt: Map shadow page before using it in shadow page table

MFN usually refers to "Machine Frame Number" in virtulization world.
Currently GVT-g populates the shadow PPGTT/GGTT page table with MFN
according to the translation between MFN and Guest PFN.

When host IOMMU is enabled, GPU DMA transactions go through the IOMMU,
GPU needs an IOVA<->MFN mapping to walk the shadow page table in host
main memory.

This patch will map a page in IOMMU page table before using it in shadow
page table and release the map when a shadow page is going to be freed.

Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
Signed-off-by: Chuanxiao Dong <chuanxiao.dong@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

drm/i915/gvt: reduce the line of interrupt logs and log friendly

Reduce the line of logs in below functions and log friendly.
  o intel_vgpu_reg_imr_handler
  o intel_vgpu_reg_master_irq_handler
  o intel_vgpu_reg_ier_handler
  o intel_vgpu_reg_iir_handler

Signed-off-by: Changbin Du <changbin.du@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

drm/i915/gvt: remove a redundant end of line in debug log

Remove a redundant end of line in below log.
  'will complete workload %p\n, status: %d\n'

Signed-off-by: Changbin Du <changbin.du@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

drm/i915/gvt: remove a noisy unimportant log in sched_policy

Remove below unimportant log which is too noisy.
  'no current vgpu search from q head'

Signed-off-by: Changbin Du <changbin.du@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

drm/i915/gvt/kvmgt: remove some dead code

"caps.buf" is always NULL here and "caps.size" is always zero.  The code
is a no-op and can be removed.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

drm/i915/gvt: fix vgpu type size init

As now gvt init after knowing hw resource info, we can determine vGPU
type from machine size instead of pre-defined value.

Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

drm/i915/gvt: use normal mmio read function for firmware exposure

As now gvt init is late after MMIO initialization, use normal MMIO
read function for initial firmware exposure if no available firmware
loaded.

Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

drm/i915/gvt: remove detect_host() MPT hook

We only depend on pvinfo register for GVT-g state detection,
not require hypervisor host detect any more.

Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

drm/i915/gvt: move intel iommu detection to intel_gvt_init()

Prepare to remove detect_host() hook. Move intel iommu detection early
in intel_gvt_init().

Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

drm/i915: make intel_gvt_init() later instead of too early

Previously intel_gvt_init() was called very early even before
MMIO initialization which had several drawbacks:
- Have to handle MMIO access for initial MMIO state dump if golden
  state firmware is not available
- Hypervisor detection should depend on pvinfo only instead of detecting
  hypervisor status.
- Don't know hw resource size e.g aperture, ggtt size to determine
  for vGPU type, etc.

This trys to move intel_gvt_init() call late after required info
has already been initialized for GVT host.

Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

drm/i915/gvt: add more resolutions in virtual edid

The current virtual edid can only support the resolution up
to 1024x768. Update the virtual edid so that can support more
resoltions. With this new virtual edid, resolution can
be up to 1920x1200.

V2: add detailed modeline description in edid code comments

Signed-off-by: Chuanxiao Dong <chuanxiao.dong@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

Merge branch 'exynos-drm-next' of git://git./linux/kernel/git/daeinki/drm-exynos into drm-next

adding runtime PM support to MIC driver, and including some
cleanups - especially using atomic helper functions
instead of specific ones - and fixups.

* 'exynos-drm-next' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos:
  drm/exynos: g2d: prevent integer overflow in
  drm/exynos: fix a timeout loop
  drm/exynos: use atomic helper commit
  drm/exynos: remove unnecessary codes
  drm/exynos: mic: Add runtime PM support
  drm/exynos: Stop using drm_framebuffer_unregister_private
  drm/exynos: mic: Fix parse_dt function
  drm/exynos: mic: Add mode_set callback function

Merge tag 'sunxi-drm-for-4.11' of https://git./linux/kernel/git/mripard/linux into drm-next

Allwinner DRM changes for 4.11

Just one minor fix.

* tag 'sunxi-drm-for-4.11' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux:
  drm/sun4i: Fix a return value in case of error

Merge branch 'drm-vmwgfx-next' of git://people.freedesktop.org/~syeh/repos_linux into drm-next

This is to address what we've discussed, moving some of the minor changes
into a drm-next request.

* 'drm-vmwgfx-next' of git://people.freedesktop.org/~syeh/repos_linux:
  drm/vmwgfx: Use kmemdup instead of kmalloc and memcpy
  drm/vmwgfx: Fix depth input into drm_mode_legacy_fb_format
  drm/vmwgfx: Fix a potential integer overflow
  drm/vmwgfx: Clear an uninitialized struct member
  drm/vmwgfx: Annotate ignored return values
  drm/vmwgfx: Clear uninitialized fields of a parameter

Merge branch 'drm-next-4.11' of git://people.freedesktop.org/~agd5f/linux into drm-next

This is the main feature pull for radeon and amdgpu for 4.11.  Highlights:
- Power and clockgating improvements
- Preliminary SR-IOV support
- ttm buffer priority support
- ttm eviction fixes
- Removal of the ttm lru callbacks
- Remove SI DPM quirks due to MC firmware issues
- Handle VFCT with multiple vbioses
- Powerplay improvements
- Lots of driver cleanups

* 'drm-next-4.11' of git://people.freedesktop.org/~agd5f/linux: (120 commits)
  drm/amdgpu: fix amdgpu_bo_va_mapping flags
  drm/amdgpu: access stolen VRAM directly on CZ (v2)
  drm/amdgpu: access stolen VRAM directly on KV/KB (v2)
  drm/amdgpu: fix kernel panic when dpm disabled on Kv.
  drm/amdgpu: fix dpm bug on Kv.
  drm/amd/powerplay: fix regresstion issue can't set manual dpm mode.
  drm/amdgpu: handle vfct with multiple vbios images
  drm/radeon: handle vfct with multiple vbios images
  drm/amdgpu: move misc si headers into amdgpu
  drm/amdgpu: remove unused header si_reg.h
  drm/radeon: drop pitcairn dpm quirks
  drm/amdgpu: drop pitcairn dpm quirks
  drm: radeon: radeon_ttm: Handle return NULL error from ioremap_nocache
  drm/amd/amdgpu/amdgpu_ttm: Handle return NULL error from ioremap_nocache
  drm/amdgpu: add new virtual display ID
  drm/amd/amdgpu: remove the uncessary parameter for ib scheduler
  drm/amdgpu: Bring bo creation in line with radeon driver (v2)
  drm/amd/powerplay: fix misspelling in header guard
  drm/ttm: revert "add optional LRU removal callback v2"
  drm/ttm: revert "implement LRU add callbacks v2"
  ...

Merge tag 'drm-misc-next-2017-01-30' of git://anongit.freedesktop.org/git/drm-misc into drm-next

Another round of -misc stuff:
- Noralf debugfs cleanup cleanup (not yet everything, some more driver
  patches awaiting acks).
- More doc work.
- edid/infoframe fixes from Ville.
- misc 1-patch fixes all over, as usual

Noralf needs this for his tinydrm pull request.

* tag 'drm-misc-next-2017-01-30' of git://anongit.freedesktop.org/git/drm-misc: (48 commits)
  drm/vc4: Remove vc4_debugfs_cleanup()
  dma/fence: Export enable-signaling tracepoint for emission by drivers
  drm/tilcdc: Remove tilcdc_debugfs_cleanup()
  drm/tegra: Remove tegra_debugfs_cleanup()
  drm/sti: Remove drm_debugfs_remove_files() calls
  drm/radeon: Remove drm_debugfs_remove_files() call
  drm/omap: Remove omap_debugfs_cleanup()
  drm/hdlcd: Remove hdlcd_debugfs_cleanup()
  drm/etnaviv: Remove etnaviv_debugfs_cleanup()
  drm/etnaviv: allow build with COMPILE_TEST
  drm/amd/amdgpu: Remove drm_debugfs_remove_files() call
  drm/prime: Clarify DMA-BUF/GEM Object lifetime
  drm/ttm: Make sure BOs being swapped out are cacheable
  drm/atomic: Remove drm_atomic_debugfs_cleanup()
  drm: drm_minor_register(): Clean up debugfs on failure
  drm: debugfs: Remove all files automatically on cleanup
  drm/fourcc: add vivante tiled layout format modifiers
  drm/edid: Set YQ bits in the AVI infoframe according to CEA-861-F
  drm/edid: Set AVI infoframe Q even when QS=0
  drm/edid: Introduce drm_hdmi_avi_infoframe_quant_range()
  ...

Merge tag 'drm/atmel-hlcdc/for-4.11' of git://git./linux/kernel/git/bbrezillon/linux into drm-next

Contains a single patch to create the fbdev at driver's registration
time instead of waiting for the connector status change.

* tag 'drm/atmel-hlcdc/for-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/bbrezillon/linux:
  drm/atmel-hlcdc: Rework the fbdev creation logic

Merge tag 'zxdrm-4.11' of git://git./linux/kernel/git/shawnguo/linux into drm-next

ZTE DRM driver updates for 4.11:
 - Add missing selection of VIDEOMODE_HELPERS in Kconfig, since ZTE DRM
   driver uses drm_display_mode_to_videomode().
 - Enable HDMI audio support through SPDIF interface based on generic
   hdmi-audio-codec driver.
 - Enable VOU VL (Video Layer) to support overlay plane with scaling
   function.
 - Refine zx_vou driver a bit and then add TV Encoder output device
   support.

[airlied: fixup plane format change]

* tag 'zxdrm-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  drm: zte: add tvenc driver support
  dt: add bindings for ZTE tvenc device
  drm: zte: add function to configure vou_ctrl dividers
  drm: zte: move struct vou_inf into zx_vou driver
  drm: zte: add interlace mode support
  drm: zte: add overlay plane support
  drm: zte: add .atomic_disable hook to disable graphic layer
  drm: zte: make zx_plane accessible from zx_vou driver
  drm: zte: support hdmi audio through spdif
  drm: zte: select VIDEOMODE_HELPERS in Kconfig

Merge branch 'drm-intel-next' of git://anongit.freedesktop.org/git/drm-intel into drm-next

Updated pull request after I pulled first time :)

* 'drm-intel-next' of git://anongit.freedesktop.org/git/drm-intel:
  drm/i915: Pevent copying uninitialised garbage into vma->ggtt_view

Merge branch 'for-upstream/mali-dp' of git://linux-arm.org/linux-ld into drm-next

Hope I'm not too late before the cutoff for the v4.11 with these patches.
Mostly an asorted set of fixes that we have discovered while playing with
the code and preparing for the next set of features.

* 'for-upstream/mali-dp' of git://linux-arm.org/linux-ld:
  drm: mali-dp: fix stride setting for multi-plane formats
  drm: mali-dp: Add plane offset to the plane's physical start address register
  drm: mali-dp: Check for sufficient address space
  drm: mali-dp: Check hw version matches device-tree
  drm: mali-dp: Rename malidp_input_format to malidp_pixel_format
  drm: mali-dp: fix Lx_CONTROL register fields clobber
  drm: mali-dp: Fix transposed horizontal/vertical flip
  drm: mali-dp: Fix destination size handling when rotating
  drm: mali-dp: Don't force source size == crtc size
  drm: mali-dp: Check more use cases in the plane's ->atomic_check()
  drm: malidp: Remove event_list member from struct malidp_drm
  drm/arm/malidp: Fix possible dereference of NULL

drm/exynos: g2d: prevent integer overflow in

The size computations done in the ioctl function use an integer.
If userspace submits a request with req->cmd_nr or req->cmd_buf_nr
set to INT_MAX, the integer computations overflow later, leading
to potential (kernel) memory corruption.

Prevent this issue by enforcing a limit on the number of submitted
commands, so that we have enough headroom later for the size
computations.

Note that this change has no impact on the currently available
users in userspace, like e.g. libdrm/exynos.

While at it, also make a comment about the size computation more
detailed.

Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

drm/exynos: fix a timeout loop

We were trying to print an error message if we timed out here, but the
loop actually ends with "tries" set to UINT_MAX and not zero.  Fix this
by changing from tries-- to --tries.

A for loop would actually be the most natural way to do this.  My fix
means we only loop 99 times instead of 100 but that's probably ok.

Fixes: a696394c5224 ('drm/exynos: mixer: simplify loop in vp_win_reset()')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

drm/exynos: use atomic helper commit

This patch replaces specific atomic commit function
with atomic helper commit one.

For this, it removes existing atomic commit function
and relevant code specific to Exynos DRM and makes
atomic helper commit to be used instead.

Below are changes for the use of atomic helper commit:
- add atomic_commit_tail callback specific to Exynos DRM
  . default implemention of atomic helper doesn't mesh well
    with runtime PM so the device driver which supports runtime
    PM should call drm_atomic_helper_commit_modeset_enables function
    prior to drm_atomic_helper_commit_planes function call.
    atomic_commit_tail callback implements this call ordering.
- allow plane commit only in case that CRTC device is enabled.
  . for this, it calls atomic_helper_commit_planes function
    with DRM_PLANE_COMMIT_ACTIVE_ONLY flag in atomic_commit_tail callback.

Signed-off-by: Inki Dae <inki.dae@samsung.com>
Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.com>

drm/exynos: remove unnecessary codes

This patch removes exynos_drm_crtc_cancel_page_flip call
when drm is closed because at that time, events will be released
by drm_events_release function.

Changelog v1:
- remove exynos_drm_crtc_cancel_page_flip function also because
  this funtion isn't used anymore.

Signed-off-by: Inki Dae <inki.dae@samsung.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>

drm/exynos: mic: Add runtime PM support

This patch adds runtime support calls to notify device core when MIC
device is really in use. Runtime PM is implemented by enabling and
disabling clocks like in other Exynos DRM subdrivers. Adding runtime
PM support is needed to let power domain with this device to be turned
off when display is not used.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

drm/exynos: Stop using drm_framebuffer_unregister_private

This is the deprecated function for when you embedded the framebuffer
somewhere else (which breaks refcounting). But exynos is using
drm_framebuffer_remove and a free-standing fb, so this is rendundant.

Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

drm/exynos: mic: Fix parse_dt function

The OF graph is not necessary because the panel is a child of
dsi. therefore, the parse_dt function of dsi does not need to
check the remote_node connected to the panel. and the whole
parse_dt function should be refactored later.

Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

drm/exynos: mic: Add mode_set callback function

Before applying the patch, used the of_get_videomode function to
parse the display-timings in the panel which is the child driver
of dsi in the devicetree. this is wrong. So removed the
of_get_videomode and fixed to get videomode struct through
mode_set callback function.

Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

drm/atmel-hlcdc: Rework the fbdev creation logic

Now that we wait for DRM panels to be available before registering the
DRM device (returning -EPROBE_DEFER if the panel has not been probed
yet), we no longer need to put the fbdev creation code in
->output_poll_changed().

This removes the 10 secs delay between DRM dev registration and fbdev
creation (polling period = 10 seconds).

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Reported-by: Alex Vazquez <avazquez.dev@gmail.com>

drm/vc4: Remove vc4_debugfs_cleanup()

drm_debugfs_cleanup() now removes all minor->debugfs_list entries
automatically, so the drm_driver.debugfs_cleanup callback is not
needed.

Cc: eric@anholt.net
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170126225621.12314-17-noralf@tronnes.org

drm: zte: add tvenc driver support

It adds the TV Encoder driver to support video output in PAL and NTSC
format.  The driver uses syscon/regmap interface to configure register
bit sitting in SYSCTRL module for DAC power control.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>

dt: add bindings for ZTE tvenc device

It adds bindings doc for ZTE VOU TV Encoder device.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>

drm: zte: add function to configure vou_ctrl dividers

The clock control module (CRM) cannot always provide desired frequency
for all VOU output devices.  That's why VOU integrates a few dividers
to further divide the clocks from CRM.  Let's add an interface for
configuring these dividers.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>

drm: zte: move struct vou_inf into zx_vou driver

Although data in struct vou_inf is defined per output device, it doesn't
belong to the device itself but VOU control module.  All these data can
just be defined in VOU driver, and output device driver only needs to
invoke VOU driver function with device ID to enable/disable specific
output device.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>

drm: zte: add interlace mode support

It adds interlace mode support in VOU TIMING_CTRL and channel control
block, so that VOU driver gets ready to support output device in
interlace mode like TV Encoder.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>

drm: zte: add overlay plane support

It enables VOU VL (Video Layer) to support overlay plane with scaling
function.  VL0 has some quirks on scaling support.  We choose to skip it
and only adds VL1 and VL2 into DRM core for now.

Function zx_plane_atomic_disable() gets moved around with no changes to
save a forward declaration.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>

drm: zte: add .atomic_disable hook to disable graphic layer

There are a few hardware bits for each graphic layer to control main/aux
channel and clock selection, as well as the layer enabling.  These bits
sit outside the layer block itself, but in VOU control glue block.  We
currently set these bits up at CRTC initialization for once, and do not
support disabling the layer.

This patch creates a pair of functions zx_vou_layer_enable[disable] to
be invoked from plane hooks .atomic_update and .atomic_disable to set up
and tear down the layer.  This is generic for both graphic and video
layers, so it will make the overlay plane support to be added later much
easier.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>

drm: zte: make zx_plane accessible from zx_vou driver

Move struct zx_plane from zx_plane.c to zx_plane.h, so that it can be
accessed from zx_vou driver, and we can save the use of struct
zx_layer_data completely.  More importantly, those additional data used
by VOU controller to enable/disable graphic and video layers can later
be added and accessed much more easily from zx_vou driver.

While at it, we make two changes to zx_plane_init() interface:

 - Encode struct device pointer in zx_plane, so that we do not need to
   pass it as a parameter.
 - Change return of zx_plane_init() from struct drm_plane pointer to
   error code, since we can get the pointer from zx_plane in zx_vou
   driver now.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>

drm: zte: support hdmi audio through spdif

It enables HDMI audio support through SPDIF interface based on generic
hdmi-audio-codec driver.  The HDMI hardware supports more audio
interfaces than SPDIF, like I2S, which may be added later.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>

drm: zte: select VIDEOMODE_HELPERS in Kconfig

ZTE DRM driver uses drm_display_mode_to_videomode() in function
zx_crtc_enable().  Select VIDEOMODE_HELPERS in Kconfig to fix the
following link error.

  LD      vmlinux.o
  MODPOST vmlinux.o
drivers/built-in.o: In function `zx_crtc_enable':
:(.text+0xbdeb8): undefined reference to `drm_display_mode_to_videomode'

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>

dma/fence: Export enable-signaling tracepoint for emission by drivers

Currently this tracepoint is solely used by dma_fence_enable_sw_signaling,
however I have a need to manually perform the hw enabling of the
signaling and would like to emit this tracepoint for completeness.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Sumit Semwal <sumit.semwal@linaro.org>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170124115758.31353-1-chris@chris-wilson.co.uk

drm/amdgpu: fix amdgpu_bo_va_mapping flags

They are 64bit not 32 for a while now.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: access stolen VRAM directly on CZ (v2)

We don't need to use the PCI BAR on APUs. This allows us to access
the full VRAM directly without being limited by the BAR size.

v2: squash in 64bit shift fix

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: access stolen VRAM directly on KV/KB (v2)

We don't need to use the PCI BAR on APUs. This allows us to access
the full VRAM directly without being limited by the BAR size.

v2: squash in 64bit shift fix

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: fix kernel panic when dpm disabled on Kv.

Return early if it's disabled.

Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: fix dpm bug on Kv.

1. current_ps/request_ps not update.
2. compare crrent_ps and request_ps, if same,
   don't re-set power state.

Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: fix regresstion issue can't set manual dpm mode.

Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: handle vfct with multiple vbios images

The vfct table can contain multiple vbios images if the
platform contains multiple GPUs. Noticed by netkas on
phoronix forums.  This patch fixes those platforms.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

drm/radeon: handle vfct with multiple vbios images

The vfct table can contain multiple vbios images if the
platform contains multiple GPUs. Noticed by netkas on
phoronix forums.  This patch fixes those platforms.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

drm/amdgpu: move misc si headers into amdgpu

Move these to the amdgpu directory to match what we
do for other asics.

Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: remove unused header si_reg.h

All of these are available elsewhere.

Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon: drop pitcairn dpm quirks

No longer necessary with the new 58 mc ucode.

bug:
https://bugs.freedesktop.org/show_bug.cgi?id=76490

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: drop pitcairn dpm quirks

No longer necessary with the new 58 mc ucode.

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm: radeon: radeon_ttm: Handle return NULL error from ioremap_nocache

Here, If ioremap_nocache will fail. It will return NULL.
Kernel can run into a NULL-pointer dereference.
This error check will avoid NULL pointer dereference.

Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/amdgpu/amdgpu_ttm: Handle return NULL error from ioremap_nocache

Here, If ioremap_nocache will fail. It will return NULL.
Kernel can run into a NULL-pointer dereference.
This error check will avoid NULL pointer dereference.

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add new virtual display ID

In the case of pass-through, amdgpu.ko may be included into a image
with the hard code ID therefore loading driver with specified virtual
display ID will lose efficacy when the BDF of GPU modifies.So add the
new ID string "all" for it as same as vf case what does.

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Yintian Tao <yttao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/amdgpu: remove the uncessary parameter for ib scheduler

Signed-off-by: Junwei Zhang <Jerry.Zhang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Bring bo creation in line with radeon driver (v2)

Add the bo creation changes that have been done to the radeon driver in
recent times, e.g. disable GTT WC on 32 bit because it is broken there,
and also disable it generally (and print a warning message) when
CONFIG_X86_PAT is not set.

v2: agd: fix warning in defined(CONFIG_X86) && !defined(CONFIG_X86_PAT)
    case

Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Nils Holland <nholland@tisys.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: fix misspelling in header guard

In smu7_clockpowergating.h, the #ifndef statement which prevents
multiple inclusions of the header file uses _SMU7_CLOCK_POWER_GATING_H_
but the following #define statement uses _SMU7_CLOCK__POWER_GATING_H_.

Signed-off-by: Nicolas Iooss <nicolas.iooss_linux@m4x.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/ttm: revert "add optional LRU removal callback v2"

Without the custom LRU management the callback is not used any more.

agd: fix trivial warning

Reviewed-by: Sinclair Yeh <syeh@vmware.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-and-Tested-by: Roger.He <Hongbo.He@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/ttm: revert "implement LRU add callbacks v2"

The additional housekeeping had too much CPU overhead,
let's use the BO priorities instead.

agd: also revert hibmc changes

Reviewed-by: Sinclair Yeh <syeh@vmware.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-and-Tested-by: Roger.He <Hongbo.He@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: double the priority of kernel allocations

Give kernel allocations a higher priority cause it is often
more work to swap them back in.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Roger.He <Hongbo.He@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: user BO priority instead of self coding it (v2)

Keeping groups of BOs on the LRU is to time consuming on command submission.

Instead use the newly added BO priority to give a certain eviction order.

v2: agd: trivial warning fix

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Roger.He <Hongbo.He@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/ttm: add BO priorities for the LRUs

This way the driver can specify a priority for a BO which has the effect that
a BO is only evicted when all other BOs with a lower priority are evicted
first.

Reviewed-by: Sinclair Yeh <syeh@vmware.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Roger.He <Hongbo.He@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/ttm: remove allow_errors parameter from ttm_bo_force_list_clean

Not allowing errors here is completely pointless and actually dangerous
cause trying to continue on an error can cause an endless loop.

Reviewed-by: Sinclair Yeh <syeh@vmware.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Roger.He <Hongbo.He@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/vi: fix mailbox irq mistake

For virt, freed mailbox irq should be handled in hw fini, not hw
init. Correct it.

Signed-off-by: Xiangliang Yu <Xiangliang.Yu@amd.com>
Reviewed-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: fix reboot failure issue for virtualization

Reboot process will call HW fini functions of IP blocks. For virt,
need to send event three before hw fini and send event four after
hw fini.

Signed-off-by: Xiangliang Yu <Xiangliang.Yu@amd.com>
Reviewed-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/amdgpu: Add PCI info to gca_config debugfs

So we can determine which device the entry is before connecting
a display.

Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu:insert switch buffer only for VM submit

for non-VM submit which is from kernel side, no need
to switch buffer at all.

Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu:Preamble is forbid to be ignored in SRIOV

SR-IOV requires the preamble.

Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu:set cond_exec polling value to 1 in ring_init

no need to set it per ib_schedule(), hw won't override
this polling address.

Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu:in cntx_ctrl we need insert meta-init for CE/DE(V2)

to support SRIOV preemption.

v2:
fix emit_frame_size

Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu:introduce new flag to identify VM domain for cntx_ctrl

To determine whether the context uses GPUVM or not.

Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu:implement CE/DE meta-init routines

those package need to insert into ring buffer for
SRIOV case. they are used to let CP do preemption.

Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu:implement ring_write_multiple

Write multiple dwords to the ring.

Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu:add META_DATA struct for CSA/SRIOV v2

META-DATA is used in GFX cmd submit, we have two
format suit for META-DATA-init, one is legacy and another
is for chained-ib preempt, which is used in vulkan
UMD.

v2: drop use CP version number to judge if chain-ib
supports or not, we wait for it mature

Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: refine ci uvd dpm code.

Fix up the powergating logic.

Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Ack-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: simplify allocation of scratch regs

The scratch regs are sequential so there's no need to keep
them in an array, we can just return the index of the first
free register + the base register. Also change the array
of bools for keeping track of the free regs to a bitfield.

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Nils Wallménius <nils.wallmenius@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Refactor flip into prepare submit and submit. (v3)

Make pflip atomic friendly. Split the fuinction into
whatever can fail part and the actual flip submit part.
Call the pre-submit function before atomic states
are swapped so in case of error we can fail the
IOCTL.

v2:
Update due to  target_vblank code change.
Fix identetation.
Change return type for amdgpu_crtc_submit_flip to void
v3: agd: fix formatting

Signed-off-by: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com>
Reviewed-by Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Switch error code when bo pin fails. (v3)

Switching to -ENOMEM resolves a hang in case the driver
uses this function in atomic code path.

v2: Update commit message.
v3:
Remove forcing -EINVAL in case of amdgpu_bo_pin fail
since there is no apparent reason for not just passing
through the the return value.

Signed-off-by: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/gfx8: fix bugon.cocci warnings

 Use BUG_ON instead of a if condition followed by BUG.

Generated by: scripts/coccinelle/misc/bugon.cocci

Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewd-by: Xiangliang.Yu <Xiangliang.Yu@amd.com>
CC: Xiangliang Yu <Xiangliang.Yu@amd.com>
Signed-off-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: use the num_rings variable for checking vce rings

Difference families may have different numbers of rings. Use
the variable rather than a hardcoded number.

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/amdgpu: fix locking in bo creation error path

Unlock the resv lock only if we were the ones to lock it in the first
place.

Signed-off-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Reviewed-by: Edward O'Callaghan <funfunctor@folklore1984.net>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/amdgpu: lock reservation object while creating shadow bo

ttm_bo_init checks that the reservation object is locked. This is
the caller's responsibility when resv != NULL. Otherwise, the inline
reservation object of the newly allocated buffer is used and must
explicitly be locked.

Uninterruptible w/w locks without an acquire context are always
successful.

v2: use ww_mutex_lock

Signed-off-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Reviewed-by: Edward O'Callaghan <funfunctor@folklore1984.net> (v1)
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: fix typo of CGTS

Fixes: 9e8590861e9 ('drm/amdgpu: add parse clock gating state')
Reported-by: Tom StDenis <Tom.StDenis@amd.com>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: do not reset gpu for virtualization

Current amdgpu reset process only works on bare-metal and for
SRIOV many inside it need re-work to adapt to vf device.

This is a temporary workaround to skip gpu reset.

Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Signed-off-by: Xiangliang Yu <Xiangliang.Yu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/virt: enable virtual display

Virtual display is default setting for virtualization, enable it.

Signed-off-by: Xiangliang Yu <Xiangliang.Yu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Monk Liu <Monk.Liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/vi: add support virtualization

Call VI virtualization functions if device is Vf.

Signed-off-by: Xiangliang Yu <Xiangliang.Yu@amd.com>
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: request/release full gpu access if device is vf

For gpu vf device, first need to request full gpu access before
accessing gpu registers, and release full gpu access after the
access is done.

Signed-off-by: Xiangliang Yu <Xiangliang.Yu@amd.com>
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/virt: implement VI virt operation interfaces

VI has asic specific virt support, which including mailbox and
golden registers init.

Signed-off-by: Xiangliang Yu <Xiangliang.Yu@amd.com>
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Signed-off-by: shaoyunl <Shaoyun.Liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/virt: add high level interfaces for virt

Add high level interfaces that is not relate to specific asic. So
asic files just need to implement the interfaces to support
virtualization.

Signed-off-by: Xiangliang Yu <Xiangliang.Yu@amd.com>
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Monk Liu <Monk.Liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/virt: use kiq to access registers (v2)

For virtualization, it is must for driver to use KIQ to access
registers when it is out of GPU full access mode.

v2: agd: rebase

Signed-off-by: Xiangliang Yu <Xiangliang.Yu@amd.com>
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Monk Liu <Monk.Liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/virt: add runtime flag

Add new flag to define gpu runtime that is out of full gpu access.

Signed-off-by: Xiangliang Yu <Xiangliang.Yu@amd.com>
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/gfx8: implement emit_rreg/wreg function

Implement emit_rreg/wreg function for kiq ring.

Signed-off-by: Xiangliang Yu <Xiangliang.Yu@amd.com>
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/ring: add two interfaces to support r/w registers with kiq

During virtual runtime, need to send command to kiq ring to
read/write GPU registers. Add two interface to support the two
actions.

Signed-off-by: Xiangliang Yu <Xiangliang.Yu@amd.com>
Signed-off-by: Monk Linu <Monk.Liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu:invoke CSA functions (v2)

Make sure the CSA is mapped.

v2: agd: rebase.

Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>