Lothar Waßmann [Wed, 7 Dec 2011 21:59:26 +0000 (21:59 +0000)]
net/fec: set con_id in clk_get() call to NULL
The con_id is actually not needed for clk_get().
Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Lothar Waßmann [Wed, 7 Dec 2011 21:59:25 +0000 (21:59 +0000)]
net/fec: misc cleanups
- remove some bogus whitespace
- remove line wraps from printk messages
Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Matt Carlson [Thu, 8 Dec 2011 14:40:18 +0000 (14:40 +0000)]
tg3: Update version to 3.122
This patch updates the tg3 version to 3.122.
Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Reviewed-by: Michael Chan <mchan@broadcom.com>
Reviewed-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Matt Carlson [Thu, 8 Dec 2011 14:40:17 +0000 (14:40 +0000)]
tg3: Return flowctrl config through ethtool
This patch changes the driver to return the flow control configuration
rather than the flow control status through the ETHTOOL_GPAUSEPARAM
ioctl.
Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Reviewed-by: Michael Chan <mchan@broadcom.com>
Reviewed-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Matt Carlson [Thu, 8 Dec 2011 14:40:16 +0000 (14:40 +0000)]
tg3: Track LP advertising
This patch adds code to track the autonegotiation advertisements of the
link partner and report them through ethtool.
Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Reviewed-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Matt Carlson [Thu, 8 Dec 2011 14:40:15 +0000 (14:40 +0000)]
tg3: Integrate flowctrl check into AN adv check
This patch integrates tg3_adv_1000T_flowctrl_ok() into
tg3_copper_is_advertising_all() and renames the function
tg3_phy_copper_an_config_ok().
Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Reviewed-by: Michael Chan <mchan@broadcom.com>
Reviewed-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Matt Carlson [Thu, 8 Dec 2011 14:40:14 +0000 (14:40 +0000)]
tg3: Save stats across chip resets
Tg3 has a place to store stats, but doesn't really use it. This patch
modifies the driver so that stats are saved across chip resets and gets
cleared across close / open calls.
Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Reviewed-by: Michael Chan <mchan@broadcom.com>
Reviewed-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Matt Carlson [Thu, 8 Dec 2011 14:40:13 +0000 (14:40 +0000)]
tg3: Remove ethtool stats member from dev struct
This patch removes the ethtool stats member from the tg3 device
structure.
Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Reviewed-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
stephen hemminger [Thu, 8 Dec 2011 07:17:49 +0000 (07:17 +0000)]
bridge: add local MAC address to forwarding table (v2)
If user has configured a MAC address that is not one of the existing
ports of the bridge, then we need to add a special entry in the forwarding
table. This forwarding table entry has no outgoing port so it has to be
treated a little differently. The special entry is reported by the netlink
interface with ifindex of bridge, but ignored by the old interface since there
is no usable way to put it in the ABI.
Reported-by: Koki Sanagi <sanagi.koki@jp.fujitsu.com>
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
stephen hemminger [Thu, 8 Dec 2011 07:17:41 +0000 (07:17 +0000)]
bridge: rearrange fdb notifications (v2)
Pass bridge to fdb_notify so it can determine correct namespace based
on namespace of bridge rather than namespace of destination port.
Also makes next patch easier.
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
stephen hemminger [Tue, 6 Dec 2011 13:02:24 +0000 (13:02 +0000)]
bridge: refactor fdb_notify
Move fdb_notify outside of fdb_create. This fixes the problem
that notification of local entries are not flagged correctly.
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Barak Witkowski [Wed, 7 Dec 2011 03:45:36 +0000 (03:45 +0000)]
bnx2x: fix typo in fcoe stats collection
Signed-off-by: Barak Witkowski <barak@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 7 Dec 2011 02:10:05 +0000 (21:10 -0500)]
Merge git://git./linux/kernel/git/davem/net
Roar Førde [Tue, 6 Dec 2011 12:15:44 +0000 (12:15 +0000)]
caif: Replace BUG_ON with WARN_ON.
BUG_ON is too strict in a number of circumstances,
use WARN_ON instead. Protocol errors should not halt the system.
Signed-off-by: Sjur Brændeland <sjur.brandeland@stericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
sjur.brandeland@stericsson.com [Tue, 6 Dec 2011 12:15:43 +0000 (12:15 +0000)]
caif-shm: Bugfixes for caif_shmcore.c
Various bugfixes for caif_shmcore.c:
- fix deadlocks due to improper usage of spin-lock
- add missing spin-lock init
- don't call dev_kfree_skb() with irqs disabled,
use dev_kfree_skb_irq() instead.
- fix potential skb null pointer de-reference.
Squashed original patches from:
Rabin Vincent <rabin.vincent@stericsson.com>
Durga Prasada Rao BATHINA <durgaprasadarao.b@stericcson.com>
Arun Murthy <arun.murthy@stericsson.com>
Bibek Basu <bibek.basu@stericsson.com>
Signed-off-by: Sjur Brændeland <sjur.brandeland@stericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
sjur.brandeland@stericsson.com [Tue, 6 Dec 2011 12:15:42 +0000 (12:15 +0000)]
caif: Bad assert triggering false positive.
Fix bad assert on fragment size triggering false positive.
Signed-off-by: Sjur Brændeland <sjur.brandeland@stericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Christian Auby [Tue, 6 Dec 2011 12:15:41 +0000 (12:15 +0000)]
caif-hsi: Remove wake line modification when flushing FIFO
Raising wake before flushing FIFO and lowering it after caused a
spike on AC wake that were sometimes detected and acted upon by the
modem. Fixed this by remove wake line modification when flushing FIFO.
Signed-off-by: Sjur Brændeland <sjur.brandeland@stericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 6 Dec 2011 22:04:13 +0000 (17:04 -0500)]
ipv6: Move xfrm_lookup() call down into icmp6_dst_alloc().
And return error pointers.
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 6 Dec 2011 21:48:14 +0000 (16:48 -0500)]
ipv6: Make third arg to anycast_dst_alloc() bool.
Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Chan [Tue, 6 Dec 2011 10:58:08 +0000 (10:58 +0000)]
bnx2x: Fix compile errors if CONFIG_CNIC is not set
Don't provide FCoE and iSCSI statistics to management firmware if
CONFIG_CNIC is not set. Some needed structure fields are not defined
without CONFIG_CNIC.
Reported-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Tue, 6 Dec 2011 20:03:54 +0000 (12:03 -0800)]
Merge git://git./linux/kernel/git/davem/net
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
net: Silence seq_scale() unused warning
ipv4:correct description for tcp_max_syn_backlog
pasemi_mac: Fix building as module
netback: Fix alert message.
r8169: fix Rx index race between FIFO overflow recovery and NAPI handler.
r8169: Rx FIFO overflow fixes.
ipv4: Fix peer validation on cached lookup.
ipv4: make sure RTO_ONLINK is saved in routing cache
iwlwifi: change the default behavior of watchdog timer
iwlwifi: do not re-configure HT40 after associated
iwlagn: fix HW crypto for TX-only keys
Revert "mac80211: clear sta.drv_priv on reconfiguration"
mac80211: fill rate filter for internal scan requests
cfg80211: amend regulatory NULL dereference fix
cfg80211: fix race on init and driver registration
Linus Torvalds [Tue, 6 Dec 2011 19:54:33 +0000 (11:54 -0800)]
Merge branch 'perf-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
ftrace: Fix hash record accounting bug
perf: Fix parsing of __print_flags() in TP_printk()
jump_label: jump_label_inc may return before the code is patched
ftrace: Remove force undef config value left for testing
tracing: Restore system filter behavior
tracing: fix event_subsystem ref counting
Stephen Boyd [Tue, 6 Dec 2011 08:04:40 +0000 (08:04 +0000)]
net: Silence seq_scale() unused warning
On a CONFIG_NET=y build
net/core/secure_seq.c:22: warning: 'seq_scale' defined but not
used
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pavel Emelyanov [Tue, 6 Dec 2011 07:59:52 +0000 (07:59 +0000)]
sock_diag: Move the sock_ code to net/core/
This patch moves the sock_ code from inet_diag.c to generic sock_diag.c
file and provides necessary request_module-s calls and a pointer on
inet_diag_compat dumping routine.
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pavel Emelyanov [Tue, 6 Dec 2011 07:59:32 +0000 (07:59 +0000)]
inet_diag: Cleanup type2proto last user
Now all the code works with sock_diag_req-compatible structs, so it's
possible to stop using the inet_diag_type2proto in inet_csk_diag_fill.
Pass the inet_diag_req into it and use the sdiag_protocol field. At the
same time remove the explicit ext argument, since it's also on the req.
However, this conversion is still required in _compat code, so just move
this routine, not remove.
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pavel Emelyanov [Tue, 6 Dec 2011 07:59:15 +0000 (07:59 +0000)]
inet_diag: Introduce socket family checks
The new API will specify family to work with. Teach the existing
socket walking code to bypass not interesting ones.
To preserve compatibility with existing behavior the _compat code
sets interesting family to AF_UNSPEC to dump them all.
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pavel Emelyanov [Tue, 6 Dec 2011 07:58:58 +0000 (07:58 +0000)]
inet_diag: Switch the _dump to work with new header
Make inet_diag_dumo work with given header instead of calculating
one from the nl message.
The SOCK_DIAG_BY_FAMILY just passes skb's one through, the compat code
converts the old header to new one.
Also fix the bytecode calculation to find one at proper offset.
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pavel Emelyanov [Tue, 6 Dec 2011 07:58:39 +0000 (07:58 +0000)]
inet_diag: Switch the _get_exact to work with new header
Make inet_diag_get_exact work with given header instead of calculating
one from the nl message.
The SOCK_DIAG_BY_FAMILY just passes skb's one through, the compat code
converts the old header to new one.
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pavel Emelyanov [Tue, 6 Dec 2011 07:58:21 +0000 (07:58 +0000)]
inet_diag: Introduce new inet_diag_req header
This one coinsides with the sock_diag_req in the beginning and
contains only used fields from its previous analogue.
The existing code is patched to use the _compat version of it
for now.
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pavel Emelyanov [Tue, 6 Dec 2011 07:58:03 +0000 (07:58 +0000)]
sock_diag: Initial skeleton
When receiving the SOCK_DIAG_BY_FAMILY message we have to find the
handler for provided family and pass the nl message to it.
This patch describes an infrastructure to work with such nandlers
and implements stubs for AF_INET(6) ones.
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pavel Emelyanov [Tue, 6 Dec 2011 08:05:24 +0000 (08:05 +0000)]
inet_diag: Switch from _GETSOCK to IPPROTO_ numbers
Sorry, but the vger didn't let this message go to the list. Re-sending it with
less spam-filter-prone subject.
When dumping the AF_INET/AF_INET6 sockets user will also specify the protocol,
so prepare the protocol diag handlers to work with IPPROTO_ constants.
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pavel Emelyanov [Tue, 6 Dec 2011 07:57:26 +0000 (07:57 +0000)]
inet_diag: Move byte-code finding up the call-stack
Current code calculates it at fixed offset. This offset will change, so
move the BC calculation upper to make the further patching simpler.
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pavel Emelyanov [Tue, 6 Dec 2011 07:57:06 +0000 (07:57 +0000)]
sock_diag: Introduce new message type
This type will run the family+protocol based socket dumping.
Also prepare the stub function for it.
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pavel Emelyanov [Tue, 6 Dec 2011 07:56:43 +0000 (07:56 +0000)]
inet_diag: Partly rename inet_ to sock_
The ultimate goal is to get the sock_diag module, that works in
family+protocol terms. Currently this is suitable to do on the
inet_diag basis, so rename parts of the code. It will be moved
to sock_diag.c later.
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Erwan Bracq [Tue, 6 Dec 2011 07:25:05 +0000 (07:25 +0000)]
caif-spi: Bugfix for dump upon device removal
Fix dump upon device removal, by moving deinitialization from
platform-device-remove to network-interface-uninit.
Signed-off-by: Sjur Brændeland <sjur.brandeland@stericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 6 Dec 2011 18:31:19 +0000 (13:31 -0500)]
Merge branch 'for-davem' of git://git./linux/kernel/git/linville/wireless-next
Dmitry Kravkov [Tue, 6 Dec 2011 02:05:12 +0000 (02:05 +0000)]
bnx2x: fix crash while ethtool -t
commit
2df1a70aaf70e8dff11b89b938a5f317556ee640 "bnx2x: Support
for byte queue limits" has introduced an asymmetry in usage of
netdev_tx_completed_queue and netdev_tx_sent_queue. Missing
call to netdev_tx_sent_queue causes the crash during ethtool -t.
The patch adds the missing call.
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Wei Liu [Tue, 6 Dec 2011 02:04:50 +0000 (02:04 +0000)]
netback: fix typo in comment
"variables a used" should be "variables are used".
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Wei Liu [Tue, 6 Dec 2011 00:08:20 +0000 (00:08 +0000)]
netback: remove redundant assignment
New value for netbk->mmap_pages[pending_idx] is assigned in
xen_netbk_alloc_page(), no need for a second assignment which
exposes internal to the outside world.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Barak Witkowski [Mon, 5 Dec 2011 22:41:50 +0000 (22:41 +0000)]
bnx2x, cnic: support DRV_INFO upon FW request
Add support to send driver capabilities, settings and statistics to
management firmware.
[ Redone using many local variables, removed many unnecessary inlines,
and put #defines at the left margin suggested by Joe Perches ]
Signed-off-by: Barak Witkowski <barak@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: Eddie Wai <eddie.wai@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ariel Elior [Mon, 5 Dec 2011 21:52:24 +0000 (21:52 +0000)]
bnx2x: support classification config query
To support copying MAC addresses to firmware query structure.
[ Fixed up style and formatting errors noted by DaveM and Joe Perches ]
Signed-off-by: Ariel Elior <ariele@broadcom.com>
Signed-off-by: Barak Witkowski <barak@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Barak Witkowski [Mon, 5 Dec 2011 21:52:23 +0000 (21:52 +0000)]
bnx2x: add fcoe statistics
Add FCoE statistics support for FCoE capable devices.
Signed-off-by: Barak Witkowski <barak@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Barak Witkowski [Mon, 5 Dec 2011 21:52:22 +0000 (21:52 +0000)]
bnx2x: add PFC statistics
Add Priority flow control counters for ethtool -S.
Signed-off-by: Barak Witkowski <barak@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Peter Pan(潘卫平) [Mon, 5 Dec 2011 21:39:41 +0000 (21:39 +0000)]
ipv4:correct description for tcp_max_syn_backlog
Since commit
c5ed63d66f24(tcp: fix three tcp sysctls tuning),
sysctl_max_syn_backlog is determined by tcp_hashinfo->ehash_mask,
and the minimal value is 128, and it will increase in proportion to the
memory of machine.
The original description for tcp_max_syn_backlog and sysctl_max_syn_backlog
are out of date.
Changelog:
V2: update description for sysctl_max_syn_backlog
Signed-off-by: Weiping Pan <panweiping3@gmail.com>
Reviewed-by: Shan Wei <shanwei88@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Dan Carpenter [Mon, 5 Dec 2011 20:27:07 +0000 (20:27 +0000)]
openvswitch: small potential memory leak in ovs_vport_alloc()
We're unlikely to hit this leak, but the static checkers complain if we
don't take care of it.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Jesse Gross <jesse@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
John W. Linville [Tue, 6 Dec 2011 15:47:12 +0000 (10:47 -0500)]
Merge branch 'master' of git://git./linux/kernel/git/linville/wireless-next into for-davem
Ben Hutchings [Mon, 5 Dec 2011 19:44:22 +0000 (19:44 +0000)]
pasemi_mac: Fix building as module
Commit
ded19addf9c937d83b9bfb4d73a836732569041b ('pasemic_mac*: Move
the PA Semi driver') inadvertently split pasemi_mac into two separate
modules with unresolved symbols. Change it back into a single module.
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Igor Maravic [Mon, 5 Dec 2011 02:25:57 +0000 (02:25 +0000)]
ipv4: arp: Cleanup in arp.c
Use "IS_ENABLED(CONFIG_FOO)" macro instead of
"defined(CONFIG_FOO) || defined(CONFIG_FOO_MODULE)"
Signed-off-by: Igor Maravic <igorm@etf.rs>
Signed-off-by: David S. Miller <davem@davemloft.net>
Wei Liu [Mon, 5 Dec 2011 06:57:44 +0000 (06:57 +0000)]
netback: Fix alert message.
The original message in netback_init was 'kthread_run() fails', which should be
'kthread_create() fails'.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Tue, 6 Dec 2011 01:27:55 +0000 (17:27 -0800)]
Merge branch 'for_linus' of git://cavan.codon.org.uk/platform-drivers-x86
* 'for_linus' of git://cavan.codon.org.uk/platform-drivers-x86:
toshiba_acpi: Fix machines that don't support HCI_SYSTEM_EVENT
Linus Torvalds [Tue, 6 Dec 2011 00:54:15 +0000 (16:54 -0800)]
Merge branch 'x86-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
intr_remapping: Fix section mismatch in ir_dev_scope_init()
intel-iommu: Fix section mismatch in dmar_parse_rmrr_atsr_dev()
x86, amd: Fix up numa_node information for AMD CPU family 15h model 0-0fh northbridge functions
x86, AMD: Correct align_va_addr documentation
x86/rtc, mrst: Don't register a platform RTC device for for Intel MID platforms
x86/mrst: Battery fixes
x86/paravirt: PTE updates in k(un)map_atomic need to be synchronous, regardless of lazy_mmu mode
x86: Fix "Acer Aspire 1" reboot hang
x86/mtrr: Resolve inconsistency with Intel processor manual
x86: Document rdmsr_safe restrictions
x86, microcode: Fix the failure path of microcode update driver init code
Add TAINT_FIRMWARE_WORKAROUND on MTRR fixup
x86/mpparse: Account for bus types other than ISA and PCI
x86, mrst: Change the pmic_gpio device type to IPC
mrst: Added some platform data for the SFI translations
x86,mrst: Power control commands update
x86/reboot: Blacklist Dell OptiPlex 990 known to require PCI reboot
x86, UV: Fix UV2 hub part number
x86: Add user_mode_vm check in stack_overflow_check
Linus Torvalds [Tue, 6 Dec 2011 00:54:00 +0000 (16:54 -0800)]
Merge branch 'perf-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf: Fix loss of notification with multi-event
perf, x86: Force IBS LVT offset assignment for family 10h
perf, x86: Disable PEBS on SandyBridge chips
trace_events_filter: Use rcu_assign_pointer() when setting ftrace_event_call->filter
perf session: Fix crash with invalid CPU list
perf python: Fix undefined symbol problem
perf/x86: Enable raw event access to Intel offcore events
perf: Don't use -ENOSPC for out of PMU resources
perf: Do not set task_ctx pointer in cpuctx if there are no events in the context
perf/x86: Fix PEBS instruction unwind
oprofile, x86: Fix crash when unloading module (nmi timer mode)
oprofile: Fix crash when unloading module (hr timer mode)
Linus Torvalds [Tue, 6 Dec 2011 00:53:43 +0000 (16:53 -0800)]
Merge branch 'timers-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
clockevents: Set noop handler in clockevents_exchange_device()
tick-broadcast: Stop active broadcast device when replacing it
clocksource: Fix bug with max_deferment margin calculation
rtc: Fix some bugs that allowed accumulating time drift in suspend/resume
rtc: Disable the alarm in the hardware
Linus Torvalds [Tue, 6 Dec 2011 00:51:21 +0000 (16:51 -0800)]
Merge branches 'core-urgent-for-linus' and 'irq-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
slab, lockdep: Fix silly bug
* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
genirq: Fix race condition when stopping the irq thread
Linus Torvalds [Tue, 6 Dec 2011 00:50:24 +0000 (16:50 -0800)]
Merge branch 'sched-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched, x86: Avoid unnecessary overflow in sched_clock
sched: Fix buglet in return_cfs_rq_runtime()
sched: Avoid SMT siblings in select_idle_sibling() if possible
sched: Set the command name of the idle tasks in SMP kernels
sched, rt: Provide means of disabling cross-cpu bandwidth sharing
sched: Document wait_for_completion_*() return values
sched_fair: Fix a typo in the comment describing update_sd_lb_stats
sched: Add a comment to effective_load() since it's a pain
Linus Torvalds [Mon, 5 Dec 2011 23:35:16 +0000 (15:35 -0800)]
Merge branch 'for-linus' of git://git390.marist.edu/linux-2.6
* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6:
[S390] ap: Setup timer for sending messages after reset.
[S390] cio: fix chsc_chp_vary
[S390] cio: provide fake irb for transport mode IO
[S390] cio: disallow driver io for known to be broken paths
[S390] hibernate: directly trigger subchannel evaluation
[S390] remove reset of system call restart on psw changes
[S390] add missing .set function for NT_S390_LAST_BREAK regset
[S390] fix page change underindication in pgste_update_all
[S390] ptrace inferior call interactions with TIF_SYSCALL
[S390] kdump: Replace is_kdump_kernel() with OLDMEM_BASE check
françois romieu [Sun, 4 Dec 2011 20:30:52 +0000 (20:30 +0000)]
r8169: fix Rx index race between FIFO overflow recovery and NAPI handler.
Since
92fc43b4159b518f5baae57301f26d770b0834c9, rtl8169_tx_timeout ends up
resetting Rx and Tx indexes and thus racing with the NAPI handler via
-> rtl8169_hw_reset
-> rtl_hw_reset
-> rtl8169_init_ring_indexes
What about returning to the original state ?
rtl_hw_reset is only used by rtl8169_hw_reset and rtl8169_init_one.
The latter does not need rtl8169_init_ring_indexes because the indexes
still contain their original values from the newly allocated network
device private data area (i.e. 0).
rtl8169_hw_reset is used by:
1. rtl8169_down
Helper for rtl8169_close. rtl8169_open explicitely inits the indexes
anyway.
2. rtl8169_pcierr_interrupt
Indexes are set by rtl8169_reinit_task.
3. rtl8169_interrupt
rtl8169_hw_reset is needed when the device goes down. See 1.
4. rtl_shutdown
System shutdown handler. Indexes are irrelevant.
5. rtl8169_reset_task
Indexes must be set before rtl_hw_start is called.
6. rtl8169_tx_timeout
Indexes should not be set. This is the job of rtl8169_reset_task anyway.
The removal of rtl8169_hw_reset in rtl8169_tx_timeout and its move in
rtl8169_reset_task do not change the analysis.
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Cc: hayeswang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
françois romieu [Sun, 4 Dec 2011 20:30:45 +0000 (20:30 +0000)]
r8169: Rx FIFO overflow fixes.
Realtek has specified that the post 8168c gigabit chips and the post
8105e fast ethernet chips recover automatically from a Rx FIFO overflow.
The driver does not need to clear the RxFIFOOver bit of IntrStatus and
it should rather avoid messing it.
The implementation deserves some explanation:
1. events outside of the intr_event bit mask are now ignored. It enforces
a no-processing policy for the events that either should not be there
or should be ignored.
2. RxFIFOOver was already ignored in rtl_cfg_infos[RTL_CFG_1] for the
whole 8168 line of chips with two exceptions:
- RTL_GIGA_MAC_VER_22 since
b5ba6d12bdac21bc0620a5089e0f24e362645efd
("use RxFIFO overflow workaround for 8168c chipset.").
This one should now be correctly handled.
- RTL_GIGA_MAC_VER_11 (8168b) which requires a different Rx FIFO
overflow processing.
Though it does not conform to Realtek suggestion above, the updated
driver includes no change for RTL_GIGA_MAC_VER_12 and RTL_GIGA_MAC_VER_17.
Both are 8168b. RTL_GIGA_MAC_VER_12 is common and a bit old so I'd rather
wait for experimental evidence that the change suggested by Realtek really
helps or does not hurt in unexpected ways.
Removed case statements in rtl8169_interrupt are only 8168 relevant.
3. RxFIFOOver is masked for post 8105e 810x chips, namely the sole 8105e
(RTL_GIGA_MAC_VER_30) itself.
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Cc: hayeswang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Walleij [Mon, 5 Dec 2011 13:47:48 +0000 (14:47 +0100)]
gpio: fix a build failure on KS8695 GPIO
I screwed up by compiling that driver for the machine rather
than the arch. Correcting this fixes the build error.
Cc: Grant Likely <grant.likely@secretlab.ca>
Reported-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Eric Dumazet [Mon, 5 Dec 2011 01:07:15 +0000 (01:07 +0000)]
tcp: remove TCP_OFF and TCP_PAGE macros
As mentioned by Joe Perches, TCP_OFF() and TCP_PAGE() macros are
useless.
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Sun, 4 Dec 2011 12:38:00 +0000 (12:38 +0000)]
bql: fix CONFIG_XPS=n build
netdev_queue_release() should be called even if CONFIG_XPS=n
to properly release device reference.
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Sun, 4 Dec 2011 08:51:08 +0000 (08:51 +0000)]
tcp: fix tcp_trim_head()
commit
f07d960df3 (tcp: avoid frag allocation for small frames)
breaked assumption in tcp stack that skb is either linear (skb->data_len
== 0), or fully fragged (skb->data_len == skb->len)
tcp_trim_head() made this assumption, we must fix it.
Thanks to Vijay for providing a very detailed explanation.
Reported-by: Vijay Subramanian <subramanian.vijay@gmail.com>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
sjur.brandeland@stericsson.com [Sun, 4 Dec 2011 11:22:55 +0000 (11:22 +0000)]
caif: Stash away hijacked skb destructor and call it later
This patch adds functionality for avoiding orphaning SKB too early.
The original skb is stashed away and the original destructor is called
from the hi-jacked flow-on callback. If CAIF interface goes down and a
hi-jacked SKB exists, the original skb->destructor is restored.
Signed-off-by: Sjur Brændeland <sjur.brandeland@stericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
sjur.brandeland@stericsson.com [Sun, 4 Dec 2011 11:22:54 +0000 (11:22 +0000)]
caif: Add support for flow-control on device's tx-queue
Flow control is implemented by inspecting the qdisc queue length
in order to detect potential overflow on the TX queue. When a threshold
is reached flow-off is sent upwards in the CAIF stack. At the same time
the skb->destructor is hi-jacked by orphaning the SKB and the original
destructor is replaced with a "flow-on" callback. When the "hi-jacked"
SKB is consumed the queue should be empty, and the "flow-on" callback
is called and xon is sent upwards in the CAIF stack.
Signed-off-by: Sjur Brændeland <sjur.brandeland@stericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
sjur.brandeland@stericsson.com [Sun, 4 Dec 2011 11:22:53 +0000 (11:22 +0000)]
caif: Add support for CAIF over CDC NCM USB interface
NCM 1.0 does not support anything but Ethernet framing, hence
CAIF payload will be put into Ethernet frames.
Discovery is based on fixed USB vendor 0x04cc (ST-Ericsson),
product-id 0x230f (NCM). In this variant only CAIF payload is sent over
the NCM interface.
The CAIF stack (cfusbl.c) will when USB interface register first check if
we got a CDC NCM USB interface with the right VID, PID.
It will then read the device's Ethernet address and create a 'template'
Ethernet TX header, using a broadcast address as the destination address,
and EthType 0x88b5 (802.1 Local Experimental - vendor specific).
A protocol handler for 0x88b5 is setup for reception of CAIF frames from
the CDC NCM USB interface.
Signed-off-by: Sjur Brændeland <sjur.brandeland@stericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
sjur.brandeland@stericsson.com [Sun, 4 Dec 2011 11:22:52 +0000 (11:22 +0000)]
if_ether.h: Add IEEE 802.1 Local Experimental Ethertype 1.
Add EthType 0x88b5.
This Ethertype value is available for public use for prototype and
vendor-specific protocol development,as defined in Amendment 802a
to IEEE Std 802.
Signed-off-by: Sjur Brændeland <sjur.brandeland@stericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 5 Dec 2011 23:27:28 +0000 (18:27 -0500)]
Merge branch 'master' of git://git./linux/kernel/git/jkirsher/net-next
David Miller [Fri, 2 Dec 2011 16:52:44 +0000 (16:52 +0000)]
infiniband: ipoib: Sanitize neighbour handling in ipoib_main.c
Reduce the number of dst_get_neighbour_noref() calls within a single
call chain. Primarily by passing the neighbour pointer down to the
helper functions.
Handle dst_get_neighbour_noref() returning NULL in ipoib_start_xmit()
by incrementing the dropped counter and freeing the packet. We don't
want it to fall through into the ARP/RARP/multicast handling, since
that should only happen when skb_dst() is NULL.
Signed-off-by: David S. Miller <davem@davemloft.net>
Acked-by: Roland Dreier <roland@purestorage.com>
David Miller [Fri, 2 Dec 2011 16:52:39 +0000 (16:52 +0000)]
cxgb4i: Handle dst_get_neighbour_noref() returning NULL.
Signed-off-by: David S. Miller <davem@davemloft.net>
Acked-by: Roland Dreier <roland@purestorage.com>
David Miller [Fri, 2 Dec 2011 16:52:35 +0000 (16:52 +0000)]
libcxgbi: Handle dst_get_neighbour_noref() returning NULL.
Signed-off-by: David S. Miller <davem@davemloft.net>
Acked-by: Roland Dreier <roland@purestorage.com>
David Miller [Fri, 2 Dec 2011 16:52:31 +0000 (16:52 +0000)]
infiniband: cxgb4: Consolidate 3 copies of the same operation into 1 helper function.
Three pieces of code do the same thing, create a l2t entry and then
import this information into the c4iw_ep object.
Create a helper function and call it from these 3 locations instead.
Signed-off-by: David S. Miller <davem@davemloft.net>
Acked-by: Roland Dreier <roland@purestorage.com>
David Miller [Fri, 2 Dec 2011 16:52:27 +0000 (16:52 +0000)]
infiniband: nes: Use dst's neighbour entry.
Do this instead of performing a by-hand lookup.
Signed-off-by: David S. Miller <davem@davemloft.net>
Acked-by: Roland Dreier <roland@purestorage.com>
David Miller [Fri, 2 Dec 2011 16:52:22 +0000 (16:52 +0000)]
cxgb3: Handle NULL dst neighbour in cxgb3_offload.c
Signed-off-by: David S. Miller <davem@davemloft.net>
David Miller [Fri, 2 Dec 2011 16:52:18 +0000 (16:52 +0000)]
cxgb3: Rework t3_l2t_get to take a dst_entry instead of a neighbour.
This way we consolidate the RCU locking down into the place where it
actually matters, and also we can make the code handle
dst_get_neighbour_noref() returning NULL properly.
Signed-off-by: David S. Miller <davem@davemloft.net>
David Miller [Fri, 2 Dec 2011 16:52:14 +0000 (16:52 +0000)]
infiniband: addr: Consolidate code to fetch neighbour hardware address from dst.
IPV4 should do exactly what the IPV6 code does here, which is
use the neighbour obtained via the dst entry.
And now that the two code paths do the same thing, use a common
helper function to perform the operation.
Signed-off-by: David S. Miller <davem@davemloft.net>
Acked-by: Eric Dumazet <eric.dumazet@gmail.com>
Acked-by: Roland Dreier <roland@purestorage.com>
David Miller [Fri, 2 Dec 2011 16:52:08 +0000 (16:52 +0000)]
net: Rename dst_get_neighbour{, _raw} to dst_get_neighbour_noref{, _raw}.
To reflect the fact that a refrence is not obtained to the
resulting neighbour entry.
Signed-off-by: David S. Miller <davem@davemloft.net>
Acked-by: Roland Dreier <roland@purestorage.com>
Steven Rostedt [Sat, 5 Nov 2011 00:32:39 +0000 (20:32 -0400)]
ftrace: Fix hash record accounting bug
If the set_ftrace_filter is cleared by writing just whitespace to
it, then the filter hash refcounts will be decremented but not
updated. This causes two bugs:
1) No functions will be enabled for tracing when they all should be
2) If the users clears the set_ftrace_filter twice, it will crash ftrace:
------------[ cut here ]------------
WARNING: at /home/rostedt/work/git/linux-trace.git/kernel/trace/ftrace.c:1384 __ftrace_hash_rec_update.part.27+0x157/0x1a7()
Modules linked in:
Pid: 2330, comm: bash Not tainted 3.1.0-test+ #32
Call Trace:
[<
ffffffff81051828>] warn_slowpath_common+0x83/0x9b
[<
ffffffff8105185a>] warn_slowpath_null+0x1a/0x1c
[<
ffffffff810ba362>] __ftrace_hash_rec_update.part.27+0x157/0x1a7
[<
ffffffff810ba6e8>] ? ftrace_regex_release+0xa7/0x10f
[<
ffffffff8111bdfe>] ? kfree+0xe5/0x115
[<
ffffffff810ba51e>] ftrace_hash_move+0x2e/0x151
[<
ffffffff810ba6fb>] ftrace_regex_release+0xba/0x10f
[<
ffffffff8112e49a>] fput+0xfd/0x1c2
[<
ffffffff8112b54c>] filp_close+0x6d/0x78
[<
ffffffff8113a92d>] sys_dup3+0x197/0x1c1
[<
ffffffff8113a9a6>] sys_dup2+0x4f/0x54
[<
ffffffff8150cac2>] system_call_fastpath+0x16/0x1b
---[ end trace
77a3a7ee73794a02 ]---
Link: http://lkml.kernel.org/r/20111101141420.GA4918@debian
Reported-by: Rabin Vincent <rabin@rab.in>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Steven Rostedt [Fri, 4 Nov 2011 20:32:25 +0000 (16:32 -0400)]
perf: Fix parsing of __print_flags() in TP_printk()
A update is made to the sched:sched_switch event that adds some
logic to the first parameter of the __print_flags() that shows the
state of tasks. This change cause perf to fail parsing the flags.
A simple fix is needed to have the parser be able to process ops
within the argument.
Cc: stable@vger.kernel.org
Reported-by: Andrew Vagin <avagin@openvz.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Gleb Natapov [Tue, 18 Oct 2011 17:55:51 +0000 (19:55 +0200)]
jump_label: jump_label_inc may return before the code is patched
If cpu A calls jump_label_inc() just after atomic_add_return() is
called by cpu B, atomic_inc_not_zero() will return value greater then
zero and jump_label_inc() will return to a caller before jump_label_update()
finishes its job on cpu B.
Link: http://lkml.kernel.org/r/20111018175551.GH17571@redhat.com
Cc: stable@vger.kernel.org
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Jason Baron <jbaron@redhat.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Steven Rostedt [Fri, 4 Nov 2011 14:45:23 +0000 (10:45 -0400)]
ftrace: Remove force undef config value left for testing
A forced undef of a config value was used for testing and was
accidently left in during the final commit. This causes x86 to
run slower than needed while running function tracing as well
as causes the function graph selftest to fail when DYNMAIC_FTRACE
is not set. This is because the code in MCOUNT expects the ftrace
code to be processed with the config value set that happened to
be forced not set.
The forced config option was left in by:
commit
6331c28c962561aee59e5a493b7556a4bb585957
ftrace: Fix dynamic selftest failure on some archs
Link: http://lkml.kernel.org/r/20111102150255.GA6973@debian
Cc: stable@vger.kernel.org
Reported-by: Rabin Vincent <rabin@rab.in>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Li Zefan [Tue, 1 Nov 2011 01:09:35 +0000 (09:09 +0800)]
tracing: Restore system filter behavior
Though not all events have field 'prev_pid', it was allowed to do this:
# echo 'prev_pid == 100' > events/sched/filter
but commit
75b8e98263fdb0bfbdeba60d4db463259f1fe8a2 (tracing/filter: Swap
entire filter of events) broke it without any reason.
Link: http://lkml.kernel.org/r/4EAF46CF.8040408@cn.fujitsu.com
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Ilya Dryomov [Mon, 31 Oct 2011 09:07:42 +0000 (11:07 +0200)]
tracing: fix event_subsystem ref counting
Fix a bug introduced by
e9dbfae5, which prevents event_subsystem from
ever being released.
Ref_count was added to keep track of subsystem users, not for counting
events. Subsystem is created with ref_count = 1, so there is no need to
increment it for every event, we have nr_events for that. Fix this by
touching ref_count only when we actually have a new user -
subsystem_open().
Cc: stable@vger.kernel.org
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Link: http://lkml.kernel.org/r/1320052062-7846-1-git-send-email-idryomov@gmail.com
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
David S. Miller [Mon, 5 Dec 2011 18:23:14 +0000 (13:23 -0500)]
Merge branch 'for-davem' of git://git./linux/kernel/git/linville/wireless
David S. Miller [Mon, 5 Dec 2011 18:21:42 +0000 (13:21 -0500)]
ipv4: Fix peer validation on cached lookup.
If ipv4_valdiate_peer() fails during a cached entry lookup,
we'll NULL derer since the loop iterator assumes rth is not
NULL.
Letting this be handled as a failure is just bogus, so just make it
not fail. If we have trouble getting a non-NULL neighbour for the
redirected gateway, just restore the original gateway and continue.
The very next use of this cached route will try again.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Seth Forshee [Wed, 16 Nov 2011 23:37:45 +0000 (17:37 -0600)]
toshiba_acpi: Fix machines that don't support HCI_SYSTEM_EVENT
The Satellite C670-10V generates notifications for hotkeys but does
not support HCI_SYSTEM_EVENT. As a result when a hotkey is pressed
it gets stuck in an infinite loop in toshiba_acpi_notify. To fix
this, detect whether or not HCI_SYSTEM_EVENT is supported up-front
and don't try to read system events if it isn't supported. In
addition, limit the number of retries when reading HCI_SYSTEM_EVENT
fails so that this loop cannot run unbounded.
Signed-off-by: Seth Forshee <seth.forshee@canonical.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Sergey Senozhatsky [Wed, 26 Oct 2011 16:15:07 +0000 (19:15 +0300)]
intr_remapping: Fix section mismatch in ir_dev_scope_init()
Fix:
Section mismatch in reference from the function
ir_dev_scope_init() to the function
.init.text:dmar_dev_scope_init() The function
ir_dev_scope_init() references the function __init dmar_dev_scope_init().
Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: Youquan Song <youquan.song@intel.com>
Cc: Ohad Ben-Cohen <ohad@wizery.com>
Link: http://lkml.kernel.org/r/20111026161507.GB10103@swordfish
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Sergey Senozhatsky [Wed, 26 Oct 2011 15:45:39 +0000 (18:45 +0300)]
intel-iommu: Fix section mismatch in dmar_parse_rmrr_atsr_dev()
dmar_parse_rmrr_atsr_dev() calls rmrr_parse_dev() and
atsr_parse_dev() which are both marked as __init.
Section mismatch in reference from the function
dmar_parse_rmrr_atsr_dev() to the function
.init.text:dmar_parse_dev_scope() The function
dmar_parse_rmrr_atsr_dev() references the function __init
dmar_parse_dev_scope().
Section mismatch in reference from the function
dmar_parse_rmrr_atsr_dev() to the function
.init.text:dmar_parse_dev_scope() The function
dmar_parse_rmrr_atsr_dev() references the function __init
dmar_parse_dev_scope().
Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: iommu@lists.linux-foundation.org
Cc: Joerg Roedel <joerg.roedel@amd.com>
Cc: Ohad Ben-Cohen <ohad@wizery.com>
Link: http://lkml.kernel.org/r/20111026154539.GA10103@swordfish
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Andreas Herrmann [Fri, 2 Dec 2011 07:21:43 +0000 (08:21 +0100)]
x86, amd: Fix up numa_node information for AMD CPU family 15h model 0-0fh northbridge functions
I've received complaints that the numa_node attribute for family
15h model 00-0fh (e.g. Interlagos) northbridge functions shows
-1 instead of the proper node ID.
Correct this with attached quirks (similar to quirks for other
AMD CPU families used in multi-socket systems).
Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com>
Cc: Frank Arnold <frank.arnold@amd.com>
Cc: Borislav Petkov <borislav.petkov@amd.com>
Link: http://lkml.kernel.org/r/20111202072143.GA31916@alberich.amd.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Borislav Petkov [Mon, 21 Nov 2011 11:10:19 +0000 (12:10 +0100)]
x86, AMD: Correct align_va_addr documentation
Commit
dfb09f9b7ab0 ("x86, amd: Avoid cache aliasing penalties
on AMD family 15h") introduced a kernel command line parameter
called 'align_va_addr' which still refers to arguments used in
an earlier version of the patch and which got changed without
updating the documentation. Correct that omission.
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
Cc: Frank Arnold <frank.arnold@amd.com>
Link: http://lkml.kernel.org/r/1321873819-29541-1-git-send-email-bp@amd64.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Mathias Nyman [Tue, 15 Nov 2011 22:46:52 +0000 (14:46 -0800)]
x86/rtc, mrst: Don't register a platform RTC device for for Intel MID platforms
Intel MID x86 platforms have a memory mapped virtual RTC
instead. No MID platform have the default ports (and
accessing them may do weird stuff).
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Cc: feng.tang@intel.com
Cc: Feng Tang <feng.tang@intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Major Lee [Tue, 15 Nov 2011 23:31:23 +0000 (15:31 -0800)]
x86/mrst: Battery fixes
When DCDC input line over current detecting, PMIC will change
charging current automatically. Logging event is enough.
Signed-off-by: Major Lee <major_lee@wistron.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Cc: Mathias Nyman <mathias.nyman@linux.intel.com>
Cc: Feng Tang <feng.tang@intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
[fix build]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Konrad Rzeszutek Wilk [Tue, 15 Nov 2011 22:49:09 +0000 (14:49 -0800)]
x86/paravirt: PTE updates in k(un)map_atomic need to be synchronous, regardless of lazy_mmu mode
Fix an outstanding issue that has been reported since 2.6.37.
Under a heavy loaded machine processing "fork()" calls could
crash with:
BUG: unable to handle kernel paging request at
f573fc8c
IP: [<
c01abc54>] swap_count_continued+0x104/0x180
*pdpt =
000000002a3b9027 *pde =
0000000001bed067 *pte =
0000000000000000 Oops: 0000 [#1] SMP
Modules linked in:
Pid: 1638, comm: apache2 Not tainted 3.0.4-linode37 #1
EIP: 0061:[<
c01abc54>] EFLAGS:
00210246 CPU: 3
EIP is at swap_count_continued+0x104/0x180
.. snip..
Call Trace:
[<
c01ac222>] ? __swap_duplicate+0xc2/0x160
[<
c01040f7>] ? pte_mfn_to_pfn+0x87/0xe0
[<
c01ac2e4>] ? swap_duplicate+0x14/0x40
[<
c01a0a6b>] ? copy_pte_range+0x45b/0x500
[<
c01a0ca5>] ? copy_page_range+0x195/0x200
[<
c01328c6>] ? dup_mmap+0x1c6/0x2c0
[<
c0132cf8>] ? dup_mm+0xa8/0x130
[<
c013376a>] ? copy_process+0x98a/0xb30
[<
c013395f>] ? do_fork+0x4f/0x280
[<
c01573b3>] ? getnstimeofday+0x43/0x100
[<
c010f770>] ? sys_clone+0x30/0x40
[<
c06c048d>] ? ptregs_clone+0x15/0x48
[<
c06bfb71>] ? syscall_call+0x7/0xb
The problem is that in copy_page_range() we turn lazy mode on,
and then in swap_entry_free() we call swap_count_continued()
which ends up in:
map = kmap_atomic(page, KM_USER0) + offset;
and then later we touch *map.
Since we are running in batched mode (lazy) we don't actually
set up the PTE mappings and the kmap_atomic is not done
synchronously and ends up trying to dereference a page that has
not been set.
Looking at kmap_atomic_prot_pfn(), it uses
'arch_flush_lazy_mmu_mode' and doing the same in
kmap_atomic_prot() and __kunmap_atomic() makes the problem go
away.
Interestingly, commit
b8bcfe997e4615 ("x86/paravirt: remove lazy
mode in interrupts") removed part of this to fix an interrupt
issue - but it went to far and did not consider this scenario.
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
John W. Linville [Mon, 5 Dec 2011 16:05:44 +0000 (11:05 -0500)]
Merge branch 'master' of git://git./linux/kernel/git/linville/wireless into for-davem
Ingo Molnar [Mon, 5 Dec 2011 15:38:51 +0000 (16:38 +0100)]
Merge branch 'ucode' of git://git./linux/kernel/git/bp/bp into x86/urgent
Peter Chubb [Mon, 5 Dec 2011 13:53:53 +0000 (16:53 +0300)]
x86: Fix "Acer Aspire 1" reboot hang
Looks like on some Acer Aspire 1s with older bioses, reboot via bios
fails. It works on my machine, (with BIOS version 0.3310) but
not on some others (BIOS version 0.3309).
There's a log of problems at:
https://bbs.archlinux.org/viewtopic.php?id=124136
This patch adds a different callback to the reboot quirk table,
to allow rebooting via keybaord controller.
Reported-by: Uroš Vampl <mobile.leecher@gmail.com>
Tested-by: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Peter Chubb <peter.chubb@nicta.com.au>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: stable@kernel.org
Link: http://lkml.kernel.org/r/1323093233-9481-1-git-send-email-anarsoul@gmail.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Ajaykumar Hotchandani [Fri, 11 Nov 2011 13:01:57 +0000 (18:31 +0530)]
x86/mtrr: Resolve inconsistency with Intel processor manual
Following is from Notes of section 11.5.3 of Intel processor
manual available at:
http://www.intel.com/Assets/PDF/manual/325384.pdf
For the Pentium 4 and Intel Xeon processors, after the sequence of
steps given above has been executed, the cache lines containing the
code between the end of the WBINVD instruction and before the
MTRRS have actually been disabled may be retained in the cache
hierarchy. Here, to remove code from the cache completely, a
second WBINVD instruction must be executed after the MTRRs have
been disabled.
This patch provides resolution for that.
Ideally, I will like to make changes only for Pentium 4 and Xeon
processors. But, I am not finding easier way to do it.
And, extra wbinvd() instruction does not hurt much for other
processors.
Signed-off-by: Ajaykumar Hotchandani <ajaykumar.hotchandani@oracle.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Lucas De Marchi <lucas.demarchi@profusion.mobi>
Link: http://lkml.kernel.org/r/4EBD1CC5.3030008@oracle.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Ingo Molnar [Mon, 5 Dec 2011 13:34:00 +0000 (14:34 +0100)]
Merge branch 'tip/perf/urgent' of git://git./linux/kernel/git/rostedt/linux-trace into perf/urgent
Borislav Petkov [Mon, 5 Dec 2011 13:28:37 +0000 (14:28 +0100)]
x86: Document rdmsr_safe restrictions
Recently, I got bitten by using rdmsr_safe too early in the boot
process. Document its shortcomings for future reference.
Link: http://lkml.kernel.org/r/4ED5B70F.606@lwfinger.net
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
Srivatsa S. Bhat [Mon, 7 Nov 2011 12:35:32 +0000 (18:05 +0530)]
x86, microcode: Fix the failure path of microcode update driver init code
The microcode update driver's initialization code does not handle
failures correctly. This patch fixes this issue.
Signed-off-by: Jan Beulich <JBeulich@suse.com>
Signed-off-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/20111107123530.12164.31227.stgit@srivatsabhat.in.ibm.com
Link: http://lkml.kernel.org/r/4ED8E2270200007800065120@nat28.tlf.novell.com
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
Prarit Bhargava [Tue, 18 Oct 2011 17:24:10 +0000 (13:24 -0400)]
Add TAINT_FIRMWARE_WORKAROUND on MTRR fixup
TAINT_FIRMWARE_WORKAROUND should be set when an MTRR fixup
is done.
Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Acked-by: David Rientjes <rientjes@google.com>
Link: http://lkml.kernel.org/r/1318958650-12447-1-git-send-email-prarit@redhat.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
projects / GitHub / LineageOS / android_kernel_motorola_exynos9610.git / log