Benjamin Tissoires [Mon, 27 Mar 2017 14:59:36 +0000 (16:59 +0200)]
HID: logitech-hidpp: battery: provide CAPACITY_LEVEL
CAPACITY LEVEL allows to forward rough information on the battery mileage.
HID++ 2.0 devices will either report percentage or levels, so better
forwarding this information to the user space.
The M325 supports only 2 levels: 'Full' and 'Critical'. With mileage,
it will report either 90% or 5%, which might confuse users. With this
change the battery will either report "Full" or "Critical".
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Tested-by: Bastien Nocera <hadess@hadess.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Benjamin Tissoires [Mon, 27 Mar 2017 14:59:35 +0000 (16:59 +0200)]
HID: logitech-hidpp: rename battery level into capacity
The power_supply term for the percentage is capacity. Capacity level
can be given when non accurate mileage is provided by the device, so
better stick to the terms used in power_supply.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Tested-by: Bastien Nocera <hadess@hadess.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Benjamin Tissoires [Mon, 27 Mar 2017 14:59:34 +0000 (16:59 +0200)]
HID: logitech-hidpp: battery: provide ONLINE property
When ONLINE isn't set, upower should ignore the battery capacity,
so there is no need to overload it with some random values.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Tested-by: Bastien Nocera <hadess@hadess.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Benjamin Tissoires [Mon, 27 Mar 2017 14:59:33 +0000 (16:59 +0200)]
HID: logitech-hidpp: notify battery on connect
When a device reconnects, there is a high chance its power supply has
been changed (for a battery replacement for instance). Just forward
the battery state here.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Tested-by: Bastien Nocera <hadess@hadess.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Benjamin Tissoires [Mon, 27 Mar 2017 14:59:32 +0000 (16:59 +0200)]
HID: logitech-hidpp: return an error if the queried feature is not present
Or the device just answers a valid feature '0'.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Tested-by: Bastien Nocera <hadess@hadess.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Benjamin Tissoires [Mon, 27 Mar 2017 14:59:31 +0000 (16:59 +0200)]
HID: logitech-hidpp: create the battery for all types of HID++ devices
The creation of the power_supply should not be in a HID++ 2.0 specific
function.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Tested-by: Bastien Nocera <hadess@hadess.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Benjamin Tissoires [Mon, 27 Mar 2017 14:59:30 +0000 (16:59 +0200)]
HID: logitech-hidpp: forward device info in power_supply
Better forwarding the device name, manufacturer and serial to upower.
Note that serial is still empty, it will be filled in a later patch
in this series.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Tested-by: Bastien Nocera <hadess@hadess.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Benjamin Tissoires [Mon, 27 Mar 2017 14:59:29 +0000 (16:59 +0200)]
HID: logitech-hidpp: handle battery events in hidpp_raw_hidpp_event()
Battery events are reported through HID++, so we need to be sure
the report ID is the HID++ one.
Without this, we might receive keyboard events that looks just like
battery events with wrong data and which will confuse user space.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Tested-by: Bastien Nocera <hadess@hadess.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Benjamin Tissoires [Mon, 27 Mar 2017 14:59:28 +0000 (16:59 +0200)]
HID: logitech-hidpp: rework hidpp_connect_event()
Looks like all users don't care about a disconnect.
Simplify the various variant_connect() and put the connect state check
at the beginning.
For delayed input devices, make sure we go through all other connect
values (protocol, battery) before bailing out.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Tested-by: Bastien Nocera <hadess@hadess.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Benjamin Tissoires [Mon, 27 Mar 2017 14:59:27 +0000 (16:59 +0200)]
HID: logitech-hidpp: retrieve the HID++ device name when available
hidpp->name can't be null.
Only HID++ 2.0 and above device supports the query.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Tested-by: Bastien Nocera <hadess@hadess.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Benjamin Tissoires [Mon, 27 Mar 2017 14:59:26 +0000 (16:59 +0200)]
HID: logitech-hidpp: rework probe path for unifying devices
Unifying devices are different from others because they can probed
while not connected. So we need to talk to the receiver to get some
extra information like the device name and the serial.
Instead of having conditionals while attempting to read the device name
from HID++ 2.0, have a special init path for them.
Store the retrieved serial in hdev->uniq.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Tested-by: Bastien Nocera <hadess@hadess.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Benjamin Tissoires [Mon, 27 Mar 2017 14:59:25 +0000 (16:59 +0200)]
HID: logitech-hidpp: create a capabilities bits field
Do not pollute the quirks bits field which is public API
with elements that are queried from the device.
Move the 2 battery capabilities into the new field.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Tested-by: Bastien Nocera <hadess@hadess.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Benjamin Tissoires [Mon, 27 Mar 2017 14:59:24 +0000 (16:59 +0200)]
HID: logitech-hidpp: do not query the name through HID++ for 1.0 devices
Unless they are connected through unifying, they don't support it,
so remove one error in the logs.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Tested-by: Bastien Nocera <hadess@hadess.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Benjamin Tissoires [Mon, 27 Mar 2017 14:59:23 +0000 (16:59 +0200)]
HID: logitech-hidpp: make sure we only register one battery per device
Simple check to add, huge improvement :)
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Tested-by: Bastien Nocera <hadess@hadess.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Bastien Nocera [Mon, 27 Mar 2017 14:59:22 +0000 (16:59 +0200)]
HID: logitech-hidpp: Add scope to battery
Without a scope defined, UPower assumes that the battery provides
power to the computer it's connected to, like a laptop battery or a UPS.
Tested-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Bastien Nocera <hadess@hadess.net>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Tested-by: Bastien Nocera <hadess@hadess.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Benjamin Tissoires [Mon, 27 Mar 2017 14:59:21 +0000 (16:59 +0200)]
HID: logitech-dj: allow devices to request full pairing information
Register 0xB5 should be handled specially no matter what function is
used. This allows to retrieve the serial and the Quad ID from
hid-logitech-hidpp directly.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Tested-by: Bastien Nocera <hadess@hadess.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Arnd Bergmann [Mon, 11 Jul 2016 21:49:20 +0000 (23:49 +0200)]
HID: logitech-hidpp: select CONFIG_POWER_SUPPLY
A recent commit added barry support to this driver, but that causes
a link failure when CONFIG_POWER_SUPPLY is not set:
drivers/hid/built-in.o: In function `hidpp_battery_get_property':
:(.text+0x1a834): undefined reference to `power_supply_get_drvdata'
drivers/hid/built-in.o: In function `hidpp_raw_event':
:(.text+0x1b10c): undefined reference to `power_supply_changed'
drivers/hid/built-in.o: In function `hidpp_connect_event':
:(.text+0x1bd88): undefined reference to `devm_power_supply_register'
:(.text+0x1be30): undefined reference to `power_supply_powers'
This adds a dependency, identically to the other HID drivers that need this.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Fixes:
5a2b190cddb9 ("HID: logitech-hidpp: add battery support for HID++ 2.0 devices")
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Benjamin Tissoires [Wed, 29 Jun 2016 09:28:02 +0000 (19:28 +1000)]
HID: logitech-hidpp: remove HIDPP_QUIRK_CONNECT_EVENTS
Now that we can create battery power_supply sources, it's better to enable
the connect_event callback unconditionally.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Tested-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Peter Hutterer [Wed, 29 Jun 2016 09:28:01 +0000 (19:28 +1000)]
HID: logitech-hidpp: add battery support for HID++ 2.0 devices
If the 0x1000 Unified Battery Level Status feature exists, expose the battery
level.
The main drawback is that while a device is plugged in its battery level is 0.
To avoid exposing that as 0% charge we make up a number based on the charging
status.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Linus Torvalds [Tue, 28 Jun 2016 19:01:14 +0000 (12:01 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/jikos/hid
Pull HID fix from Jiri Kosina:
"Regression fix for multitouch palm rejection from Allen Hung"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
HID: multitouch: enable palm rejection for Windows Precision Touchpad
Revert "HID: multitouch: enable palm rejection if device implements confidence usage"
Allen Hung [Thu, 23 Jun 2016 08:31:30 +0000 (16:31 +0800)]
HID: multitouch: enable palm rejection for Windows Precision Touchpad
The usage Confidence is mandary to Windows Precision Touchpad devices. If
it is examined in input_mapping on a WIndows Precision Touchpad, a new add
quirk MT_QUIRK_CONFIDENCE desgned for such devices will be applied to the
device. A touch with the confidence bit is not set is determined as
invalid.
Tested on Dell XPS13 9343
Cc: stable@vger.kernel.org # v4.5+
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Tested-by: Andy Lutomirski <luto@kernel.org> # XPS 13 9350, BIOS 1.4.3
Signed-off-by: Allen Hung <allen_hung@dell.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Allen Hung [Thu, 23 Jun 2016 08:31:29 +0000 (16:31 +0800)]
Revert "HID: multitouch: enable palm rejection if device implements confidence usage"
This reverts commit
25a84db15b3f ("HID: multitouch: enable palm rejection
if device implements confidence usage")
The commit enables palm rejection for Win8 Precision Touchpad devices but
the quirk MT_QUIRK_VALID_IS_CONFIDENCE it is using is not working very
properly. This quirk is originally designed for some WIn7 touchscreens. Use
of this for a Win8 Precision Touchpad will cause unexpected pointer jumping
problem.
Cc: stable@vger.kernel.org # v4.5+
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Tested-by: Andy Lutomirski <luto@kernel.org> # XPS 13 9350, BIOS 1.4.3
Signed-off-by: Allen Hung <allen_hung@dell.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Linus Torvalds [Tue, 28 Jun 2016 03:43:00 +0000 (20:43 -0700)]
Merge tag 'for-v4.7-rc' of git://git./linux/kernel/git/sre/linux-power-supply
Pull power supply fixes from Sebastian Reichel.
* tag 'for-v4.7-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply:
power_supply: tps65217-charger: Fix NULL deref during property export
power_supply: power_supply_read_temp only if use_cnt > 0
Linus Torvalds [Tue, 28 Jun 2016 03:34:43 +0000 (20:34 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/dtor/input
Pull input fixes from Dmitry Torokhov.
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: vmmouse - remove port reservation
Input: elantech - add more IC body types to the list
Input: wacom_w8001 - ignore invalid pen data packets
Input: wacom_w8001 - w8001_MAX_LENGTH should be 13
Input: xpad - fix oops when attaching an unknown Xbox One gamepad
MAINTAINERS: add Pali Rohár as reviewer of ALPS PS/2 touchpad driver
Input: add HDMI CEC specific keycodes
Input: add BUS_CEC type
Input: xpad - fix rumble on Xbox One controllers with 2015 firmware
Linus Torvalds [Mon, 27 Jun 2016 20:38:58 +0000 (13:38 -0700)]
Merge branch 'rc-fixes' of git://git./linux/kernel/git/mmarek/kbuild
Pull kbuild regression fix from Michal Marek:
"The problem is that commit
9c8fa9bc08f6 ("kbuild: fix if_change and
friends to consider argument order") fixed a potential missed rebuild,
but this results in unnnecessary rebuilds with the packaging targets.
Which is still more correct than the previous logic, but also very
annoying"
* 'rc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
kbuild: Initialize exported variables
Linus Torvalds [Mon, 27 Jun 2016 18:23:44 +0000 (11:23 -0700)]
Merge branch 'for-next' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs fixes from Steve French:
"Various small cifs/smb3 fixes, include some for stable, and some from
the recent SMB3 test event"
* 'for-next' of git://git.samba.org/sfrench/cifs-2.6:
File names with trailing period or space need special case conversion
Fix reconnect to not defer smb3 session reconnect long after socket reconnect
cifs: check hash calculating succeeded
cifs: dynamic allocation of ntlmssp blob
cifs: use CIFS_MAX_DOMAINNAME_LEN when converting the domain name
cifs: stuff the fl_owner into "pid" field in the lock request
Linus Torvalds [Mon, 27 Jun 2016 17:59:53 +0000 (10:59 -0700)]
Merge branch 'linus' of git://git./linux/kernel/git/herbert/crypto-2.6
Pull crypto fixes from Herbert Xu:
"This fixes the following issues:
- Missing length check for user-space GETALG request
- Bogus memmove length in ux500 driver
- Incorrect priority setting for vmx driver
- Incorrect ABI selection for vmx driver"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: user - re-add size check for CRYPTO_MSG_GETALG
crypto: ux500 - memmove the right size
crypto: vmx - Increase priority of aes-cbc cipher
crypto: vmx - Fix ABI detection
Linus Torvalds [Mon, 27 Jun 2016 00:52:03 +0000 (17:52 -0700)]
Linux 4.7-rc5
Linus Torvalds [Sun, 26 Jun 2016 17:08:49 +0000 (10:08 -0700)]
Merge tag 'scsi-fixes' of git://git./linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Two straightforward fixes.
One is a concurrency issue only affecting SAS connected SATA drives,
but which could hang the storage subsystem if it triggers (because the
outstanding command count on error never goes back to zero) and the
other is a NO_TAG fallout from the switch to hostwide tags which
causes the system to crash on module insertion (we've checked
carefully and only the 53c700 family of drivers is vulnerable to this
issue)"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
53c700: fix BUG on untagged commands
scsi: fix race between simultaneous decrements of ->host_failed
Linus Torvalds [Sat, 25 Jun 2016 15:53:38 +0000 (08:53 -0700)]
Merge branch 'for-linus-4.7-part2' of git://git./linux/kernel/git/mason/linux-btrfs
Pull btrfs fixes part 2 from Chris Mason:
"This has one patch from Omar to bring iterate_shared back to btrfs.
We have a tree of work we queue up for directory items and it doesn't
lend itself well to shared access. While we're cleaning it up, Omar
has changed things to use an exclusive lock when there are delayed
items"
* 'for-linus-4.7-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
Btrfs: fix ->iterate_shared() by upgrading i_rwsem for delayed nodes
Linus Torvalds [Sat, 25 Jun 2016 15:42:31 +0000 (08:42 -0700)]
Merge branch 'for-linus-4.7' of git://git./linux/kernel/git/mason/linux-btrfs
Pull btrfs fixes from Chris Mason:
"I have a two part pull this time because one of the patches Dave
Sterba collected needed to be against v4.7-rc2 or higher (we used
rc4). I try to make my for-linus-xx branch testable on top of the
last major so we can hand fixes to people on the list more easily, so
I've split this pull in two.
This first part has some fixes and two performance improvements that
we've been testing for some time.
Josef's two performance fixes are most notable. The transid tracking
patch makes a big improvement on pretty much every workload"
* 'for-linus-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
Btrfs: Force stripesize to the value of sectorsize
btrfs: fix disk_i_size update bug when fallocate() fails
Btrfs: fix error handling in map_private_extent_buffer
Btrfs: fix error return code in btrfs_init_test_fs()
Btrfs: don't do nocow check unless we have to
btrfs: fix deadlock in delayed_ref_async_start
Btrfs: track transid for delayed ref flushing
Linus Torvalds [Sat, 25 Jun 2016 13:55:48 +0000 (06:55 -0700)]
Merge tag 'sound-4.7-rc5' of git://git./linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Again pretty calm weeks: we've had only a few trivial / stable
HD-audio fixes in addition to a possible race fix for snd-dummy driver
spotted by syzkaller"
* tag 'sound-4.7-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: dummy: Fix a use-after-free at closing
ALSA: hda / realtek - add two more Thinkpad IDs (5050,5053) for tpt460 fixup
ALSA: hda - Fix the headset mic jack detection on Dell machine
ALSA: hda/tegra: iomem fixups for sparse warnings
ALSA: hdac_regmap - fix the register access for runtime PM
Linus Torvalds [Sat, 25 Jun 2016 13:49:32 +0000 (06:49 -0700)]
Merge branch 'perf-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull x86 kprobe fix from Thomas Gleixner:
"A single fix clearing the TF bit when a fault is single stepped"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
kprobes/x86: Clear TF bit in fault on single-stepping
Linus Torvalds [Sat, 25 Jun 2016 13:38:42 +0000 (06:38 -0700)]
Merge branch 'sched-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull scheduler fixes from Thomas Gleixner:
"A couple of scheduler fixes:
- force watchdog reset while processing sysrq-w
- fix a deadlock when enabling trace events in the scheduler
- fixes to the throttled next buddy logic
- fixes for the average accounting (missing serialization and
underflow handling)
- allow kernel threads for fallback to online but not active cpus"
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/core: Allow kthreads to fall back to online && !active cpus
sched/fair: Do not announce throttled next buddy in dequeue_task_fair()
sched/fair: Initialize throttle_count for new task-groups lazily
sched/fair: Fix cfs_rq avg tracking underflow
kernel/sysrq, watchdog, sched/core: Reset watchdog on all CPUs while processing sysrq-w
sched/debug: Fix deadlock when enabling sched events
sched/fair: Fix post_init_entity_util_avg() serialization
Omar Sandoval [Fri, 20 May 2016 20:50:33 +0000 (13:50 -0700)]
Btrfs: fix ->iterate_shared() by upgrading i_rwsem for delayed nodes
Commit
fe742fd4f90f ("Revert "btrfs: switch to ->iterate_shared()"")
backed out the conversion to ->iterate_shared() for Btrfs because the
delayed inode handling in btrfs_real_readdir() is racy. However, we can
still do readdir in parallel if there are no delayed nodes.
This is a temporary fix which upgrades the shared inode lock to an
exclusive lock only when we have delayed items until we come up with a
more complete solution. While we're here, rename the
btrfs_{get,put}_delayed_items functions to make it very clear that
they're just for readdir.
Tested with xfstests and by doing a parallel kernel build:
while make tinyconfig && make -j4 && git clean dqfx; do
:
done
along with a bunch of parallel finds in another shell:
while true; do
for ((i=0; i<4; i++)); do
find . >/dev/null &
done
wait
done
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
Linus Torvalds [Sat, 25 Jun 2016 13:14:44 +0000 (06:14 -0700)]
Merge branch 'locking-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull locking fix from Thomas Gleixner:
"A single fix to address a race in the static key logic"
* 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking/static_key: Fix concurrent static_key_slow_inc()
Linus Torvalds [Sat, 25 Jun 2016 13:09:59 +0000 (06:09 -0700)]
Merge branch 'irq-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull irq fix from Thomas Gleixner:
"A single fix for the fallout from the conversion of MIPS GIC to irq
domains"
* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/mips-gic: Fix IRQs in gic_dev_domain
Linus Torvalds [Sat, 25 Jun 2016 13:01:48 +0000 (06:01 -0700)]
Merge tag 'powerpc-4.7-4' of git://git./linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
"mm/radix (Aneesh Kumar K.V):
- Update to tlb functions ric argument
- Flush page walk cache when freeing page table
- Update Radix tree size as per ISA 3.0
mm/hash (Aneesh Kumar K.V):
- Use the correct PPP mask when updating HPTE
- Don't add memory coherence if cache inhibited is set
eeh (Gavin Shan):
- Fix invalid cached PE primary bus
bpf/jit (Naveen N. Rao):
- Disable classic BPF JIT on ppc64le
.. and fix faults caused by radix patching of SLB miss handler
(Michael Ellerman)"
* tag 'powerpc-4.7-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/bpf/jit: Disable classic BPF JIT on ppc64le
powerpc: Fix faults caused by radix patching of SLB miss handler
powerpc/eeh: Fix invalid cached PE primary bus
powerpc/mm/radix: Update Radix tree size as per ISA 3.0
powerpc/mm/hash: Don't add memory coherence if cache inhibited is set
powerpc/mm/hash: Use the correct PPP mask when updating HPTE
powerpc/mm/radix: Flush page walk cache when freeing page table
powerpc/mm/radix: Update to tlb functions ric argument
Michael Ellerman [Sat, 25 Jun 2016 11:53:30 +0000 (21:53 +1000)]
Fix build break in fork.c when THREAD_SIZE < PAGE_SIZE
Commit
b235beea9e99 ("Clarify naming of thread info/stack allocators")
breaks the build on some powerpc configs, where THREAD_SIZE < PAGE_SIZE:
kernel/fork.c:235:2: error: implicit declaration of function 'free_thread_stack'
kernel/fork.c:355:8: error: assignment from incompatible pointer type
stack = alloc_thread_stack_node(tsk, node);
^
Fix it by renaming free_stack() to free_thread_stack(), and updating the
return type of alloc_thread_stack_node().
Fixes:
b235beea9e99 ("Clarify naming of thread info/stack allocators")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Sat, 25 Jun 2016 02:08:33 +0000 (19:08 -0700)]
Merge branch 'akpm' (patches from Andrew)
Merge misc fixes from Andrew Morton:
"Two weeks worth of fixes here"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (41 commits)
init/main.c: fix initcall_blacklisted on ia64, ppc64 and parisc64
autofs: don't get stuck in a loop if vfs_write() returns an error
mm/page_owner: avoid null pointer dereference
tools/vm/slabinfo: fix spelling mistake: "Ocurrences" -> "Occurrences"
fs/nilfs2: fix potential underflow in call to crc32_le
oom, suspend: fix oom_reaper vs. oom_killer_disable race
ocfs2: disable BUG assertions in reading blocks
mm, compaction: abort free scanner if split fails
mm: prevent KASAN false positives in kmemleak
mm/hugetlb: clear compound_mapcount when freeing gigantic pages
mm/swap.c: flush lru pvecs on compound page arrival
memcg: css_alloc should return an ERR_PTR value on error
memcg: mem_cgroup_migrate() may be called with irq disabled
hugetlb: fix nr_pmds accounting with shared page tables
Revert "mm: disable fault around on emulated access bit architecture"
Revert "mm: make faultaround produce old ptes"
mailmap: add Boris Brezillon's email
mailmap: add Antoine Tenart's email
mm, sl[au]b: add __GFP_ATOMIC to the GFP reclaim mask
mm: mempool: kasan: don't poot mempool objects in quarantine
...
Linus Torvalds [Sat, 25 Jun 2016 01:52:31 +0000 (18:52 -0700)]
Merge tag 'for-linus' of git://git./linux/kernel/git/dledford/rdma
Pull rdma fixes from Doug Ledford:
"This is the second batch of queued up rdma patches for this rc cycle.
There isn't anything really major in here. It's passed 0day,
linux-next, and local testing across a wide variety of hardware.
There are still a few known issues to be tracked down, but this should
amount to the vast majority of the rdma RC fixes.
Round two of 4.7 rc fixes:
- A couple minor fixes to the rdma core
- Multiple minor fixes to hfi1
- Multiple minor fixes to mlx4/mlx4
- A few minor fixes to i40iw"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (31 commits)
IB/srpt: Reduce QP buffer size
i40iw: Enable level-1 PBL for fast memory registration
i40iw: Return correct max_fast_reg_page_list_len
i40iw: Correct status check on i40iw_get_pble
i40iw: Correct CQ arming
IB/rdmavt: Correct qp_priv_alloc() return value test
IB/hfi1: Don't zero out qp->s_ack_queue in rvt_reset_qp
IB/hfi1: Fix deadlock with txreq allocation slow path
IB/mlx4: Prevent cross page boundary allocation
IB/mlx4: Fix memory leak if QP creation failed
IB/mlx4: Verify port number in flow steering create flow
IB/mlx4: Fix error flow when sending mads under SRIOV
IB/mlx4: Fix the SQ size of an RC QP
IB/mlx5: Fix wrong naming of port_rcv_data counter
IB/mlx5: Fix post send fence logic
IB/uverbs: Initialize ib_qp_init_attr with zeros
IB/core: Fix false search of the IB_SA_WELL_KNOWN_GUID
IB/core: Fix RoCE v1 multicast join logic issue
IB/core: Fix no default GIDs when netdevice reregisters
IB/hfi1: Send a pkey change event on driver pkey update
...
Linus Torvalds [Sat, 25 Jun 2016 01:43:58 +0000 (18:43 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/jikos/hid
Pull HID fix from Jiri Kosina:
"hiddev ioctl() validation fix from Scott Bauer"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
HID: hiddev: validate num_values for HIDIOCGUSAGES, HIDIOCSUSAGES commands
Linus Torvalds [Sat, 25 Jun 2016 01:36:15 +0000 (18:36 -0700)]
Merge tag 'hwmon-for-linus-v4.7-rc5' of git://git./linux/kernel/git/groeck/linux-staging
Pull hwmon fix from Guenter Roeck:
"Improve fan type detection for dell-smm to prevent kernel hang"
* tag 'hwmon-for-linus-v4.7-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: (dell-smm) Cache fan_type() calls and change fan detection
Linus Torvalds [Sat, 25 Jun 2016 01:29:55 +0000 (18:29 -0700)]
Merge tag 'acpi-4.7-rc5' of git://git./linux/kernel/git/rafael/linux-pm
Pull ACPI fix from Rafael Wysocki:
"Stable-candidate fix for a deadlock in ACPICA introduced during the
4.5 development cycle by a commit attempting to improve the handling
of AML code that doesn't belong to any namespace objects in a given
definition block (Lv Zheng)"
* tag 'acpi-4.7-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPICA: Namespace: Fix deadlock triggered by MLC support in dynamic table loading
Linus Torvalds [Sat, 25 Jun 2016 01:03:22 +0000 (18:03 -0700)]
Merge tag 'pm-4.7-rc5' of git://git./linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"Fix for a latent cpufreq driver bug uncovered by a recent ACPICA
change and several fixes for the devfreq framework, including one fix
for an issue introduced recently.
Specifics:
- Fix a latent initialization issue in the pcc-cpufreq driver
(incorrect initial value of a structure field) that has been
uncovered by a recent ACPICA commit (Mike Galbraith).
- Add a missing notification in an update_devfreq() error code path
forgotten by a recent devfreq commit (Chanwoo Choi).
- Fix devfreq device frequency initialization (Lukasz Luba).
- Fix an incorrect IS_ERR() check in the devfreq framework discovered
by the Smatch checker (Dan Carpenter).
- Drop two excessive put_device() calls from the devfreq framework
(MyungJoo Ham, Cai Zhiyong).
- Fix a possible memory leak in the devfreq framework and drop an
unnecessary kfree() invocation from it (MyungJoo Ham)"
* tag 'pm-4.7-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PM / devfreq: Send the DEVFREQ_POSTCHANGE notification when target() is failed
cpufreq: pcc-cpufreq: Fix doorbell.access_width
PM / devfreq: fix initialization of current frequency in last status
PM / devfreq: exynos-nocp: Remove incorrect IS_ERR() check
PM / devfreq: remove double put_device
PM / devfreq: fix double call put_device
PM / devfreq: fix duplicated kfree on devfreq pointer
PM / devfreq: devm_kzalloc to have dev pointer more precisely
Linus Torvalds [Sat, 25 Jun 2016 00:57:37 +0000 (17:57 -0700)]
Merge tag 'for-linus-4.7b-rc4-tag' of git://git./linux/kernel/git/xen/tip
Pull xen bug fixes from David Vrabel:
- fix x86 PV dom0 crash during early boot on some hardware
- fix two pciback bugs affects certain devices
- fix potential overflow when clearing page tables in x86 PV
* tag 'for-linus-4.7b-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen-pciback: return proper values during BAR sizing
x86/xen: avoid m2p lookup when setting early page table entries
xen/pciback: Fix conf_space read/write overlap check.
x86/xen: fix upper bound of pmd loop in xen_cleanhighmap()
xen/balloon: Fix declared-but-not-defined warning
Linus Torvalds [Sat, 25 Jun 2016 00:51:14 +0000 (17:51 -0700)]
Merge tag 'arm64-fixes' of git://git./linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"Here are a few more arm64 fixes, but things do finally appear to be
slowing down. The main fix is avoiding hibernation in a previously
unanticipated situation where we have CPUs parked in the kernel, but
it's all good stuff.
- Fix icache/dcache sync for anonymous pages under migration
- Correct the ASID limit check
- Fix parallel builds of Image and Image.gz
- Refuse to hibernate when we have CPUs that we can't offline"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: hibernate: Don't hibernate on systems with stuck CPUs
arm64: smp: Add function to determine if cpus are stuck in the kernel
arm64: mm: remove page_mapping check in __sync_icache_dcache
arm64: fix boot image dependencies to not generate invalid images
arm64: update ASID limit
Rasmus Villemoes [Fri, 24 Jun 2016 21:50:30 +0000 (14:50 -0700)]
init/main.c: fix initcall_blacklisted on ia64, ppc64 and parisc64
When I replaced kasprintf("%pf") with a direct call to
sprint_symbol_no_offset I must have broken the initcall blacklisting
feature on the arches where dereference_function_descriptor() is
non-trivial.
Fixes:
c8cdd2be213f (init/main.c: simplify initcall_blacklisted())
Link: http://lkml.kernel.org/r/1466027283-4065-1-git-send-email-linux@rasmusvillemoes.dk
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Yang Shi <yang.shi@linaro.org>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Petr Mladek <pmladek@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Andrey Vagin [Fri, 24 Jun 2016 21:50:27 +0000 (14:50 -0700)]
autofs: don't get stuck in a loop if vfs_write() returns an error
__vfs_write() returns a negative value in a error case.
Link: http://lkml.kernel.org/r/20160616083108.6278.65815.stgit@pluto.themaw.net
Signed-off-by: Andrey Vagin <avagin@openvz.org>
Signed-off-by: Ian Kent <raven@themaw.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Sudip Mukherjee [Fri, 24 Jun 2016 21:50:24 +0000 (14:50 -0700)]
mm/page_owner: avoid null pointer dereference
We have dereferenced page_ext before checking it. Lets check it first
and then used it.
Fixes:
f86e4271978b ("mm: check the return value of lookup_page_ext for all call sites")
Link: http://lkml.kernel.org/r/1465249059-7883-1-git-send-email-sudipm.mukherjee@gmail.com
Signed-off-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Colin Ian King [Fri, 24 Jun 2016 21:50:21 +0000 (14:50 -0700)]
tools/vm/slabinfo: fix spelling mistake: "Ocurrences" -> "Occurrences"
trivial fix to spelling mistake
Link: http://lkml.kernel.org/r/1466672144-831-1-git-send-email-colin.king@canonical.com
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Torsten Hilbrich [Fri, 24 Jun 2016 21:50:18 +0000 (14:50 -0700)]
fs/nilfs2: fix potential underflow in call to crc32_le
The value `bytes' comes from the filesystem which is about to be
mounted. We cannot trust that the value is always in the range we
expect it to be.
Check its value before using it to calculate the length for the crc32_le
call. It value must be larger (or equal) sumoff + 4.
This fixes a kernel bug when accidentially mounting an image file which
had the nilfs2 magic value 0x3434 at the right offset 0x406 by chance.
The bytes 0x01 0x00 were stored at 0x408 and were interpreted as a
s_bytes value of 1. This caused an underflow when substracting sumoff +
4 (20) in the call to crc32_le.
BUG: unable to handle kernel paging request at
ffff88021e600000
IP: crc32_le+0x36/0x100
...
Call Trace:
nilfs_valid_sb.part.5+0x52/0x60 [nilfs2]
nilfs_load_super_block+0x142/0x300 [nilfs2]
init_nilfs+0x60/0x390 [nilfs2]
nilfs_mount+0x302/0x520 [nilfs2]
mount_fs+0x38/0x160
vfs_kern_mount+0x67/0x110
do_mount+0x269/0xe00
SyS_mount+0x9f/0x100
entry_SYSCALL_64_fastpath+0x16/0x71
Link: http://lkml.kernel.org/r/1466778587-5184-2-git-send-email-konishi.ryusuke@lab.ntt.co.jp
Signed-off-by: Torsten Hilbrich <torsten.hilbrich@secunet.com>
Tested-by: Torsten Hilbrich <torsten.hilbrich@secunet.com>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Michal Hocko [Fri, 24 Jun 2016 21:50:16 +0000 (14:50 -0700)]
oom, suspend: fix oom_reaper vs. oom_killer_disable race
Tetsuo has reported the following potential oom_killer_disable vs.
oom_reaper race:
(1) freeze_processes() starts freezing user space threads.
(2) Somebody (maybe a kenrel thread) calls out_of_memory().
(3) The OOM killer calls mark_oom_victim() on a user space thread
P1 which is already in __refrigerator().
(4) oom_killer_disable() sets oom_killer_disabled = true.
(5) P1 leaves __refrigerator() and enters do_exit().
(6) The OOM reaper calls exit_oom_victim(P1) before P1 can call
exit_oom_victim(P1).
(7) oom_killer_disable() returns while P1 not yet finished
(8) P1 perform IO/interfere with the freezer.
This situation is unfortunate. We cannot move oom_killer_disable after
all the freezable kernel threads are frozen because the oom victim might
depend on some of those kthreads to make a forward progress to exit so
we could deadlock. It is also far from trivial to teach the oom_reaper
to not call exit_oom_victim() because then we would lose a guarantee of
the OOM killer and oom_killer_disable forward progress because
exit_mm->mmput might block and never call exit_oom_victim.
It seems the easiest way forward is to workaround this race by calling
try_to_freeze_tasks again after oom_killer_disable. This will make sure
that all the tasks are frozen or it bails out.
Fixes:
449d777d7ad6 ("mm, oom_reaper: clear TIF_MEMDIE for all tasks queued for oom_reaper")
Link: http://lkml.kernel.org/r/1466597634-16199-1-git-send-email-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Reported-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Gang He [Fri, 24 Jun 2016 21:50:13 +0000 (14:50 -0700)]
ocfs2: disable BUG assertions in reading blocks
According to some high-load testing, these two BUG assertions were
encountered, this led system panic. Actually, there were some
discussions about removing these two BUG() assertions, it would not
bring any side effect.
Then, I did the the following changes,
1) use the existing macro CATCH_BH_JBD_RACES to wrap BUG() in the
ocfs2_read_blocks_sync function like before.
2) disable the macro CATCH_BH_JBD_RACES in Makefile by default.
Link: http://lkml.kernel.org/r/1466574294-26863-1-git-send-email-ghe@suse.com
Signed-off-by: Gang He <ghe@suse.com>
Cc: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Joseph Qi <joseph.qi@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
David Rientjes [Fri, 24 Jun 2016 21:50:10 +0000 (14:50 -0700)]
mm, compaction: abort free scanner if split fails
If the memory compaction free scanner cannot successfully split a free
page (only possible due to per-zone low watermark), terminate the free
scanner rather than continuing to scan memory needlessly. If the
watermark is insufficient for a free page of order <= cc->order, then
terminate the scanner since all future splits will also likely fail.
This prevents the compaction freeing scanner from scanning all memory on
very large zones (very noticeable for zones > 128GB, for instance) when
all splits will likely fail while holding zone->lock.
compaction_alloc() iterating a 128GB zone has been benchmarked to take
over 400ms on some systems whereas any free page isolated and ready to
be split ends up failing in split_free_page() because of the low
watermark check and thus the iteration continues.
The next time compaction occurs, the freeing scanner will likely start
at the end of the zone again since no success was made previously and we
get the same lengthy iteration until the zone is brought above the low
watermark. All thp page faults can take >400ms in such a state without
this fix.
Link: http://lkml.kernel.org/r/alpine.DEB.2.10.1606211820350.97086@chino.kir.corp.google.com
Signed-off-by: David Rientjes <rientjes@google.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Hugh Dickins <hughd@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Dmitry Vyukov [Fri, 24 Jun 2016 21:50:07 +0000 (14:50 -0700)]
mm: prevent KASAN false positives in kmemleak
When kmemleak dumps contents of leaked objects it reads whole objects
regardless of user-requested size. This upsets KASAN. Disable KASAN
checks around object dump.
Link: http://lkml.kernel.org/r/1466617631-68387-1-git-send-email-dvyukov@google.com
Signed-off-by: Dmitry Vyukov <dvyukov@google.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Alexander Potapenko <glider@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Gerald Schaefer [Fri, 24 Jun 2016 21:50:04 +0000 (14:50 -0700)]
mm/hugetlb: clear compound_mapcount when freeing gigantic pages
While working on s390 support for gigantic hugepages I ran into the
following "Bad page state" warning when freeing gigantic pages:
BUG: Bad page state in process bash pfn:580001
page:
000003d116000040 count:0 mapcount:0 mapping:
ffffffff00000000 index:0x0
flags: 0x7fffc0000000000()
page dumped because: non-NULL mapping
This is because page->compound_mapcount, which is part of a union with
page->mapping, is initialized with -1 in prep_compound_gigantic_page(),
and not cleared again during destroy_compound_gigantic_page(). Fix this
by clearing the compound_mapcount in destroy_compound_gigantic_page()
before clearing compound_head.
Interestingly enough, the warning will not show up on x86_64, although
this should not be architecture specific. Apparently there is an
endianness issue, combined with the fact that the union contains both a
64 bit ->mapping pointer and a 32 bit atomic_t ->compound_mapcount as
members. The resulting bogus page->mapping on x86_64 therefore contains
00000000ffffffff instead of
ffffffff00000000 on s390, which will falsely
trigger the PageAnon() check in free_pages_prepare() because
page->mapping & PAGE_MAPPING_ANON is true on little-endian architectures
like x86_64 in this case (the page is not compound anymore,
->compound_head was already cleared before). As a result, page->mapping
will be cleared before doing the checks in free_pages_check().
Not sure if the bogus "PageAnon() returning true" on x86_64 for the
first tail page of a gigantic page (at this stage) has other theoretical
implications, but they would also be fixed with this patch.
Link: http://lkml.kernel.org/r/1466612719-5642-1-git-send-email-gerald.schaefer@de.ibm.com
Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Luiz Capitulino <lcapitulino@redhat.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Hillf Danton <hillf.zj@alibaba-inc.com>
Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: "Aneesh Kumar K . V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Lukasz Odzioba [Fri, 24 Jun 2016 21:50:01 +0000 (14:50 -0700)]
mm/swap.c: flush lru pvecs on compound page arrival
Currently we can have compound pages held on per cpu pagevecs, which
leads to a lot of memory unavailable for reclaim when needed. In the
systems with hundreads of processors it can be GBs of memory.
On of the way of reproducing the problem is to not call munmap
explicitly on all mapped regions (i.e. after receiving SIGTERM). After
that some pages (with THP enabled also huge pages) may end up on
lru_add_pvec, example below.
void main() {
#pragma omp parallel
{
size_t size = 55 * 1000 * 1000; // smaller than MEM/CPUS
void *p = mmap(NULL, size, PROT_READ | PROT_WRITE,
MAP_PRIVATE | MAP_ANONYMOUS , -1, 0);
if (p != MAP_FAILED)
memset(p, 0, size);
//munmap(p, size); // uncomment to make the problem go away
}
}
When we run it with THP enabled it will leave significant amount of
memory on lru_add_pvec. This memory will be not reclaimed if we hit
OOM, so when we run above program in a loop:
for i in `seq 100`; do ./a.out; done
many processes (95% in my case) will be killed by OOM.
The primary point of the LRU add cache is to save the zone lru_lock
contention with a hope that more pages will belong to the same zone and
so their addition can be batched. The huge page is already a form of
batched addition (it will add 512 worth of memory in one go) so skipping
the batching seems like a safer option when compared to a potential
excess in the caching which can be quite large and much harder to fix
because lru_add_drain_all is way to expensive and it is not really clear
what would be a good moment to call it.
Similarly we can reproduce the problem on lru_deactivate_pvec by adding:
madvise(p, size, MADV_FREE); after memset.
This patch flushes lru pvecs on compound page arrival making the problem
less severe - after applying it kill rate of above example drops to 0%,
due to reducing maximum amount of memory held on pvec from 28MB (with
THP) to 56kB per CPU.
Suggested-by: Michal Hocko <mhocko@suse.com>
Link: http://lkml.kernel.org/r/1466180198-18854-1-git-send-email-lukasz.odzioba@intel.com
Signed-off-by: Lukasz Odzioba <lukasz.odzioba@intel.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Kirill Shutemov <kirill.shutemov@linux.intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Vladimir Davydov <vdavydov@parallels.com>
Cc: Ming Li <mingli199x@qq.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Tejun Heo [Fri, 24 Jun 2016 21:49:58 +0000 (14:49 -0700)]
memcg: css_alloc should return an ERR_PTR value on error
mem_cgroup_css_alloc() was returning NULL on failure while cgroup core
expected it to return an ERR_PTR value leading to the following NULL
deref after a css allocation failure. Fix it by return
ERR_PTR(-ENOMEM) instead. I'll also update cgroup core so that it
can handle NULL returns.
mkdir: page allocation failure: order:6, mode:0x240c0c0(GFP_KERNEL|__GFP_COMP|__GFP_ZERO)
CPU: 0 PID: 8738 Comm: mkdir Not tainted 4.7.0-rc3+ #123
...
Call Trace:
dump_stack+0x68/0xa1
warn_alloc_failed+0xd6/0x130
__alloc_pages_nodemask+0x4c6/0xf20
alloc_pages_current+0x66/0xe0
alloc_kmem_pages+0x14/0x80
kmalloc_order_trace+0x2a/0x1a0
__kmalloc+0x291/0x310
memcg_update_all_caches+0x6c/0x130
mem_cgroup_css_alloc+0x590/0x610
cgroup_apply_control_enable+0x18b/0x370
cgroup_mkdir+0x1de/0x2e0
kernfs_iop_mkdir+0x55/0x80
vfs_mkdir+0xb9/0x150
SyS_mkdir+0x66/0xd0
do_syscall_64+0x53/0x120
entry_SYSCALL64_slow_path+0x25/0x25
...
BUG: unable to handle kernel NULL pointer dereference at
00000000000000d0
IP: init_and_link_css+0x37/0x220
PGD
34b1e067 PUD
3a109067 PMD 0
Oops: 0002 [#1] SMP
Modules linked in:
CPU: 0 PID: 8738 Comm: mkdir Not tainted 4.7.0-rc3+ #123
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.9.2-20160422_131301-anatol 04/01/2014
task:
ffff88007cbc5200 ti:
ffff8800666d4000 task.ti:
ffff8800666d4000
RIP: 0010:[<
ffffffff810f2ca7>] [<
ffffffff810f2ca7>] init_and_link_css+0x37/0x220
RSP: 0018:
ffff8800666d7d90 EFLAGS:
00010246
RAX:
0000000000000000 RBX:
0000000000000000 RCX:
0000000000000000
RDX:
ffffffff810f2499 RSI:
0000000000000000 RDI:
0000000000000008
RBP:
ffff8800666d7db8 R08:
0000000000000003 R09:
0000000000000000
R10:
0000000000000001 R11:
0000000000000000 R12:
ffff88005a5fb400
R13:
ffffffff81f0f8a0 R14:
ffff88005a5fb400 R15:
0000000000000010
FS:
00007fc944689700(0000) GS:
ffff88007fc00000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
00007f3aed0d2b80 CR3:
000000003a1e8000 CR4:
00000000000006f0
DR0:
0000000000000000 DR1:
0000000000000000 DR2:
0000000000000000
DR3:
0000000000000000 DR6:
00000000fffe0ff0 DR7:
0000000000000400
Call Trace:
cgroup_apply_control_enable+0x1ac/0x370
cgroup_mkdir+0x1de/0x2e0
kernfs_iop_mkdir+0x55/0x80
vfs_mkdir+0xb9/0x150
SyS_mkdir+0x66/0xd0
do_syscall_64+0x53/0x120
entry_SYSCALL64_slow_path+0x25/0x25
Code: 89 f5 48 89 fb 49 89 d4 48 83 ec 08 8b 05 72 3b d8 00 85 c0 0f 85 60 01 00 00 4c 89 e7 e8 72 f7 ff ff 48 8d 7b 08 48 89 d9 31 c0 <48> c7 83 d0 00 00 00 00 00 00 00 48 83 e7 f8 48 29 f9 81 c1 d8
RIP init_and_link_css+0x37/0x220
RSP <
ffff8800666d7d90>
CR2:
00000000000000d0
---[ end trace
a2d8836ae1e852d1 ]---
Link: http://lkml.kernel.org/r/20160621165740.GJ3262@mtj.duckdns.org
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Vladimir Davydov <vdavydov@virtuozzo.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Tejun Heo [Fri, 24 Jun 2016 21:49:54 +0000 (14:49 -0700)]
memcg: mem_cgroup_migrate() may be called with irq disabled
mem_cgroup_migrate() uses local_irq_disable/enable() but can be called
with irq disabled from migrate_page_copy(). This ends up enabling irq
while holding a irq context lock triggering the following lockdep
warning. Fix it by using irq_save/restore instead.
=================================
[ INFO: inconsistent lock state ]
4.7.0-rc1+ #52 Tainted: G W
---------------------------------
inconsistent {IN-SOFTIRQ-W} -> {SOFTIRQ-ON-W} usage.
kcompactd0/151 [HC0[0]:SC0[0]:HE1:SE1] takes:
(&(&ctx->completion_lock)->rlock){+.?.-.}, at: [<
000000000038fd96>] aio_migratepage+0x156/0x1e8
{IN-SOFTIRQ-W} state was registered at:
__lock_acquire+0x5b6/0x1930
lock_acquire+0xee/0x270
_raw_spin_lock_irqsave+0x66/0xb0
aio_complete+0x98/0x328
dio_complete+0xe4/0x1e0
blk_update_request+0xd4/0x450
scsi_end_request+0x48/0x1c8
scsi_io_completion+0x272/0x698
blk_done_softirq+0xca/0xe8
__do_softirq+0xc8/0x518
irq_exit+0xee/0x110
do_IRQ+0x6a/0x88
io_int_handler+0x11a/0x25c
__mutex_unlock_slowpath+0x144/0x1d8
__mutex_unlock_slowpath+0x140/0x1d8
kernfs_iop_permission+0x64/0x80
__inode_permission+0x9e/0xf0
link_path_walk+0x6e/0x510
path_lookupat+0xc4/0x1a8
filename_lookup+0x9c/0x160
user_path_at_empty+0x5c/0x70
SyS_readlinkat+0x68/0x140
system_call+0xd6/0x270
irq event stamp: 971410
hardirqs last enabled at (971409): migrate_page_move_mapping+0x3ea/0x588
hardirqs last disabled at (971410): _raw_spin_lock_irqsave+0x3c/0xb0
softirqs last enabled at (970526): __do_softirq+0x460/0x518
softirqs last disabled at (970519): irq_exit+0xee/0x110
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(&(&ctx->completion_lock)->rlock);
<Interrupt>
lock(&(&ctx->completion_lock)->rlock);
*** DEADLOCK ***
3 locks held by kcompactd0/151:
#0: (&(&mapping->private_lock)->rlock){+.+.-.}, at: aio_migratepage+0x42/0x1e8
#1: (&ctx->ring_lock){+.+.+.}, at: aio_migratepage+0x5a/0x1e8
#2: (&(&ctx->completion_lock)->rlock){+.?.-.}, at: aio_migratepage+0x156/0x1e8
stack backtrace:
CPU: 20 PID: 151 Comm: kcompactd0 Tainted: G W 4.7.0-rc1+ #52
Call Trace:
show_trace+0xea/0xf0
show_stack+0x72/0xf0
dump_stack+0x9a/0xd8
print_usage_bug.part.27+0x2d4/0x2e8
mark_lock+0x17e/0x758
mark_held_locks+0xa2/0xd0
trace_hardirqs_on_caller+0x140/0x1c0
mem_cgroup_migrate+0x266/0x370
aio_migratepage+0x16a/0x1e8
move_to_new_page+0xb0/0x260
migrate_pages+0x8f4/0x9f0
compact_zone+0x4dc/0xdc8
kcompactd_do_work+0x1aa/0x358
kcompactd+0xba/0x2c8
kthread+0x10a/0x110
kernel_thread_starter+0x6/0xc
kernel_thread_starter+0x0/0xc
INFO: lockdep is turned off.
Link: http://lkml.kernel.org/r/20160620184158.GO3262@mtj.duckdns.org
Link: http://lkml.kernel.org/g/5767CFE5.7080904@de.ibm.com
Fixes:
74485cf2bc85 ("mm: migrate: consolidate mem_cgroup_migrate() calls")
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Vladimir Davydov <vdavydov@virtuozzo.com>
Cc: <stable@vger.kernel.org> [4.5+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Kirill A. Shutemov [Fri, 24 Jun 2016 21:49:51 +0000 (14:49 -0700)]
hugetlb: fix nr_pmds accounting with shared page tables
We account HugeTLB's shared page table to all processes who share it.
The accounting happens during huge_pmd_share().
If somebody populates pud entry under us, we should decrease pagetable's
refcount and decrease nr_pmds of the process.
By mistake, I increase nr_pmds again in this case. :-/ It will lead to
"BUG: non-zero nr_pmds on freeing mm: 2" on process' exit.
Let's fix this by increasing nr_pmds only when we're sure that the page
table will be used.
Link: http://lkml.kernel.org/r/20160617122506.GC6534@node.shutemov.name
Fixes:
dc6c9a35b66b ("mm: account pmd page tables to the process")
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reported-by: zhongjiang <zhongjiang@huawei.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Kirill A. Shutemov [Fri, 24 Jun 2016 21:49:48 +0000 (14:49 -0700)]
Revert "mm: disable fault around on emulated access bit architecture"
This reverts commit
d0834a6c2c5b0c76cfb806bd7dba6556d8b4edbb.
After revert of
5c0a85fad949 ("mm: make faultaround produce old ptes")
faultaround doesn't have dependencies on hardware accessed bit, so let's
revert this one too.
Link: http://lkml.kernel.org/r/1465893750-44080-3-git-send-email-kirill.shutemov@linux.intel.com
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reported-by: "Huang, Ying" <ying.huang@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Vinayak Menon <vinmenon@codeaurora.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Kirill A. Shutemov [Fri, 24 Jun 2016 21:49:45 +0000 (14:49 -0700)]
Revert "mm: make faultaround produce old ptes"
This reverts commit
5c0a85fad949212b3e059692deecdeed74ae7ec7.
The commit causes ~6% regression in unixbench.
Let's revert it for now and consider other solution for reclaim problem
later.
Link: http://lkml.kernel.org/r/1465893750-44080-2-git-send-email-kirill.shutemov@linux.intel.com
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reported-by: "Huang, Ying" <ying.huang@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Vinayak Menon <vinmenon@codeaurora.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Antoine Tenart [Fri, 24 Jun 2016 21:49:42 +0000 (14:49 -0700)]
mailmap: add Boris Brezillon's email
There are different versions of Boris' name and email in the log, and
one typo. Add his emails in mailmap to have all of his contributions
under the same name/email tuple.
Link: http://lkml.kernel.org/r/20160609130323.27706-2-antoine.tenart@free-electrons.com
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Antoine Tenart [Fri, 24 Jun 2016 21:49:39 +0000 (14:49 -0700)]
mailmap: add Antoine Tenart's email
I used "Antoine Ténart" at first but then moved to a name without accent
as this cause some issues from time to time... Add my email in the
mailmap file to have a consistent shortlog output.
Link: http://lkml.kernel.org/r/20160609130323.27706-1-antoine.tenart@free-electrons.com
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Cc: Antoine Tenart <antoine.tenart@free-electrons.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Mel Gorman [Fri, 24 Jun 2016 21:49:37 +0000 (14:49 -0700)]
mm, sl[au]b: add __GFP_ATOMIC to the GFP reclaim mask
Commit
d0164adc89f6 ("mm, page_alloc: distinguish between being unable
to sleep, unwilling to sleep and avoiding waking kswapd") modified
__GFP_WAIT to explicitly identify the difference between atomic callers
and those that were unwilling to sleep. Later the definition was
removed entirely.
The GFP_RECLAIM_MASK is the set of flags that affect watermark checking
and reclaim behaviour but __GFP_ATOMIC was never added. Without it,
atomic users of the slab allocator strip the __GFP_ATOMIC flag and
cannot access the page allocator atomic reserves. This patch addresses
the problem.
The user-visible impact depends on the workload but potentially atomic
allocations unnecessarily fail without this path.
Link: http://lkml.kernel.org/r/20160610093832.GK2527@techsingularity.net
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Reported-by: Marcin Wojtas <mw@semihalf.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: <stable@vger.kernel.org> [4.4+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Andrey Ryabinin [Fri, 24 Jun 2016 21:49:34 +0000 (14:49 -0700)]
mm: mempool: kasan: don't poot mempool objects in quarantine
Currently we may put reserved by mempool elements into quarantine via
kasan_kfree(). This is totally wrong since quarantine may really free
these objects. So when mempool will try to use such element,
use-after-free will happen. Or mempool may decide that it no longer
need that element and double-free it.
So don't put object into quarantine in kasan_kfree(), just poison it.
Rename kasan_kfree() to kasan_poison_kfree() to respect that.
Also, we shouldn't use kasan_slab_alloc()/kasan_krealloc() in
kasan_unpoison_element() because those functions may update allocation
stacktrace. This would be wrong for the most of the remove_element call
sites.
(The only call site where we may want to update alloc stacktrace is
in mempool_alloc(). Kmemleak solves this by calling
kmemleak_update_trace(), so we could make something like that too.
But this is out of scope of this patch).
Fixes:
55834c59098d ("mm: kasan: initial memory quarantine implementation")
Link: http://lkml.kernel.org/r/575977C3.1010905@virtuozzo.com
Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Reported-by: Kuthonuzo Luruo <kuthonuzo.luruo@hpe.com>
Acked-by: Alexander Potapenko <glider@google.com>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Kostya Serebryany <kcc@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jon Mason [Fri, 24 Jun 2016 21:49:31 +0000 (14:49 -0700)]
MAINTAINERS: update Calgary IOMMU
Update the contact info for Muli, clean-up my name, and update the
mailing list to the IOMMU mailing list.
Link: http://lkml.kernel.org/r/1465493059-11840-2-git-send-email-jdmason@kudzu.us
Signed-off-by: Jon Mason <jdmason@kudzu.us>
Cc: Muli Ben-Yehuda <mulix@mulix.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Michal Hocko [Fri, 24 Jun 2016 21:49:28 +0000 (14:49 -0700)]
jbd2: get rid of superfluous __GFP_REPEAT
jbd2_alloc is explicit about its allocation preferences wrt. the
allocation size. Sub page allocations go to the slab allocator and
larger are using either the page allocator or vmalloc. This is all good
but the logic is unnecessarily complex.
1) as per Ted, the vmalloc fallback is a left-over:
: jbd2_alloc is only passed in the bh->b_size, which can't be PAGE_SIZE, so
: the code path that calls vmalloc() should never get called. When we
: conveted jbd2_alloc() to suppor sub-page size allocations in commit
:
d2eecb039368, there was an assumption that it could be called with a size
: greater than PAGE_SIZE, but that's certaily not true today.
Moreover vmalloc allocation might even lead to a deadlock because the
callers expect GFP_NOFS context while vmalloc is GFP_KERNEL.
2) __GFP_REPEAT for requests <= PAGE_ALLOC_COSTLY_ORDER is ignored
since the flag was introduced.
Let's simplify the code flow and use the slab allocator for sub-page
requests and the page allocator for others. Even though order > 0 is
not currently used as per above leave that option open.
Link: http://lkml.kernel.org/r/1464599699-30131-18-git-send-email-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Michal Hocko [Fri, 24 Jun 2016 21:49:25 +0000 (14:49 -0700)]
unicore32: get rid of superfluous __GFP_REPEAT
__GFP_REPEAT has a rather weak semantic but since it has been introduced
around 2.6.12 it has been ignored for low order allocations.
PGALLOC_GFP uses __GFP_REPEAT but it is only used in pte_alloc_one,
pte_alloc_one_kernel which does order-0 request. This means that this
flag has never been actually useful here because it has always been used
only for PAGE_ALLOC_COSTLY requests.
Link: http://lkml.kernel.org/r/1464599699-30131-17-git-send-email-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Michal Hocko [Fri, 24 Jun 2016 21:49:22 +0000 (14:49 -0700)]
tile: get rid of superfluous __GFP_REPEAT
__GFP_REPEAT has a rather weak semantic but since it has been introduced
around 2.6.12 it has been ignored for low order allocations.
pgtable_alloc_one uses __GFP_REPEAT flag for L2_USER_PGTABLE_ORDER but
the order is either 0 or 3 if L2_KERNEL_PGTABLE_SHIFT for HPAGE_SHIFT.
This means that this flag has never been actually useful here because it
has always been used only for PAGE_ALLOC_COSTLY requests.
Link: http://lkml.kernel.org/r/1464599699-30131-16-git-send-email-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Acked-by: Chris Metcalf <cmetcalf@mellanox.com> [for tile]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Michal Hocko [Fri, 24 Jun 2016 21:49:20 +0000 (14:49 -0700)]
sh: get rid of superfluous __GFP_REPEAT
__GFP_REPEAT has a rather weak semantic but since it has been introduced
around 2.6.12 it has been ignored for low order allocations.
PGALLOC_GFP uses __GFP_REPEAT but {pgd,pmd}_alloc allocate from
{pgd,pmd}_cache but both caches are allocating up to PAGE_SIZE objects.
This means that this flag has never been actually useful here because it
has always been used only for PAGE_ALLOC_COSTLY requests.
Link: http://lkml.kernel.org/r/1464599699-30131-15-git-send-email-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Rich Felker <dalias@libc.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Michal Hocko [Fri, 24 Jun 2016 21:49:17 +0000 (14:49 -0700)]
s390: get rid of superfluous __GFP_REPEAT
__GFP_REPEAT has a rather weak semantic but since it has been introduced
around 2.6.12 it has been ignored for low order allocations.
page_table_alloc then uses the flag for a single page allocation. This
means that this flag has never been actually useful here because it has
always been used only for PAGE_ALLOC_COSTLY requests.
Link: http://lkml.kernel.org/r/1464599699-30131-14-git-send-email-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Michal Hocko [Fri, 24 Jun 2016 21:49:14 +0000 (14:49 -0700)]
sparc: get rid of superfluous __GFP_REPEAT
__GFP_REPEAT has a rather weak semantic but since it has been introduced
around 2.6.12 it has been ignored for low order allocations.
{pud,pmd}_alloc_one is using __GFP_REPEAT but it always allocates from
pgtable_cache which is initialzed to PAGE_SIZE objects. This means that
this flag has never been actually useful here because it has always been
used only for PAGE_ALLOC_COSTLY requests.
Link: http://lkml.kernel.org/r/1464599699-30131-13-git-send-email-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Michal Hocko [Fri, 24 Jun 2016 21:49:12 +0000 (14:49 -0700)]
powerpc: get rid of superfluous __GFP_REPEAT
__GFP_REPEAT has a rather weak semantic but since it has been introduced
around 2.6.12 it has been ignored for low order allocations.
{pud,pmd}_alloc_one are allocating from {PGT,PUD}_CACHE initialized in
pgtable_cache_init which doesn't have larger than sizeof(void *) << 12
size and that fits into !costly allocation request size.
PGALLOC_GFP is used only in radix__pgd_alloc which uses either order-0
or order-4 requests. The first one doesn't need the flag while the
second does. Drop __GFP_REPEAT from PGALLOC_GFP and add it for the
order-4 one.
This means that this flag has never been actually useful here because it
has always been used only for PAGE_ALLOC_COSTLY requests.
Link: http://lkml.kernel.org/r/1464599699-30131-12-git-send-email-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Michal Hocko [Fri, 24 Jun 2016 21:49:09 +0000 (14:49 -0700)]
score: get rid of superfluous __GFP_REPEAT
__GFP_REPEAT has a rather weak semantic but since it has been introduced
around 2.6.12 it has been ignored for low order allocations.
pte_alloc_one{_kernel} allocate PTE_ORDER which is 0. This means that
this flag has never been actually useful here because it has always been
used only for PAGE_ALLOC_COSTLY requests.
Link: http://lkml.kernel.org/r/1464599699-30131-11-git-send-email-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Cc: Chen Liqin <liqin.linux@gmail.com>
Cc: Lennox Wu <lennox.wu@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Michal Hocko [Fri, 24 Jun 2016 21:49:06 +0000 (14:49 -0700)]
parisc: get rid of superfluous __GFP_REPEAT
__GFP_REPEAT has a rather weak semantic but since it has been introduced
around 2.6.12 it has been ignored for low order allocations.
pmd_alloc_one allocate PMD_ORDER which is 1. This means that this flag
has never been actually useful here because it has always been used only
for PAGE_ALLOC_COSTLY requests.
Link: http://lkml.kernel.org/r/1464599699-30131-10-git-send-email-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Cc: "James E.J. Bottomley" <jejb@parisc-linux.org>
Cc: Helge Deller <deller@gmx.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Michal Hocko [Fri, 24 Jun 2016 21:49:04 +0000 (14:49 -0700)]
nios2: get rid of superfluous __GFP_REPEAT
__GFP_REPEAT has a rather weak semantic but since it has been introduced
around 2.6.12 it has been ignored for low order allocations.
pte_alloc_one{_kernel} allocate PTE_ORDER which is 0. This means that
this flag has never been actually useful here because it has always been
used only for PAGE_ALLOC_COSTLY requests.
Link: http://lkml.kernel.org/r/1464599699-30131-9-git-send-email-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Cc: Ley Foon Tan <lftan@altera.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Michal Hocko [Fri, 24 Jun 2016 21:49:01 +0000 (14:49 -0700)]
mips: get rid of superfluous __GFP_REPEAT
__GFP_REPEAT has a rather weak semantic but since it has been introduced
around 2.6.12 it has been ignored for low order allocations.
pte_alloc_one{_kernel}, pmd_alloc_one allocate PTE_ORDER resp.
PMD_ORDER but both are not larger than 1. This means that this flag has
never been actually useful here because it has always been used only for
PAGE_ALLOC_COSTLY requests.
Link: http://lkml.kernel.org/r/1464599699-30131-8-git-send-email-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Cc: John Crispin <blogic@openwrt.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Michal Hocko [Fri, 24 Jun 2016 21:48:58 +0000 (14:48 -0700)]
arc: get rid of superfluous __GFP_REPEAT
__GFP_REPEAT has a rather weak semantic but since it has been introduced
around 2.6.12 it has been ignored for low order allocations.
pte_alloc_one_kernel uses __get_order_pte but this is obviously always
zero because BITS_FOR_PTE is not larger than 9 yet the page size is
always larger than 4K. This means that this flag has never been
actually useful here because it has always been used only for
PAGE_ALLOC_COSTLY requests.
Link: http://lkml.kernel.org/r/1464599699-30131-7-git-send-email-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Acked-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Michal Hocko [Fri, 24 Jun 2016 21:48:56 +0000 (14:48 -0700)]
arm64: get rid of superfluous __GFP_REPEAT
__GFP_REPEAT has a rather weak semantic but since it has been introduced
around 2.6.12 it has been ignored for low order allocations.
{pte,pmd,pud}_alloc_one{_kernel}, late_pgtable_alloc use PGALLOC_GFP for
__get_free_page (aka order-0).
pgd_alloc is slightly more complex because it allocates from pgd_cache
if PGD_SIZE != PAGE_SIZE and PGD_SIZE depends on the configuration
(CONFIG_ARM64_VA_BITS, PAGE_SHIFT and CONFIG_PGTABLE_LEVELS).
As per
config PGTABLE_LEVELS
int
default 2 if ARM64_16K_PAGES && ARM64_VA_BITS_36
default 2 if ARM64_64K_PAGES && ARM64_VA_BITS_42
default 3 if ARM64_64K_PAGES && ARM64_VA_BITS_48
default 3 if ARM64_4K_PAGES && ARM64_VA_BITS_39
default 3 if ARM64_16K_PAGES && ARM64_VA_BITS_47
default 4 if !ARM64_64K_PAGES && ARM64_VA_BITS_48
we should have the following options
CONFIG_ARM64_VA_BITS:48 CONFIG_PGTABLE_LEVELS:4 PAGE_SIZE:4k size:4096 pages:1
CONFIG_ARM64_VA_BITS:48 CONFIG_PGTABLE_LEVELS:4 PAGE_SIZE:16k size:16 pages:1
CONFIG_ARM64_VA_BITS:48 CONFIG_PGTABLE_LEVELS:3 PAGE_SIZE:64k size:512 pages:1
CONFIG_ARM64_VA_BITS:47 CONFIG_PGTABLE_LEVELS:3 PAGE_SIZE:16k size:16384 pages:1
CONFIG_ARM64_VA_BITS:42 CONFIG_PGTABLE_LEVELS:2 PAGE_SIZE:64k size:65536 pages:1
CONFIG_ARM64_VA_BITS:39 CONFIG_PGTABLE_LEVELS:3 PAGE_SIZE:4k size:4096 pages:1
CONFIG_ARM64_VA_BITS:36 CONFIG_PGTABLE_LEVELS:2 PAGE_SIZE:16k size:16384 pages:1
All of them fit into a single page (aka order-0). This means that this
flag has never been actually useful here because it has always been used
only for PAGE_ALLOC_COSTLY requests.
Link: http://lkml.kernel.org/r/1464599699-30131-6-git-send-email-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Michal Hocko [Fri, 24 Jun 2016 21:48:53 +0000 (14:48 -0700)]
x86/efi: get rid of superfluous __GFP_REPEAT
__GFP_REPEAT has a rather weak semantic but since it has been introduced
around 2.6.12 it has been ignored for low order allocations.
efi_alloc_page_tables uses __GFP_REPEAT but it allocates an order-0
page. This means that this flag has never been actually useful here
because it has always been used only for PAGE_ALLOC_COSTLY requests.
Link: http://lkml.kernel.org/r/1464599699-30131-4-git-send-email-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Acked-by: Matt Fleming <matt@codeblueprint.co.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Michal Hocko [Fri, 24 Jun 2016 21:48:50 +0000 (14:48 -0700)]
x86: get rid of superfluous __GFP_REPEAT
__GFP_REPEAT has a rather weak semantic but since it has been introduced
around 2.6.12 it has been ignored for low order allocations.
PGALLOC_GFP uses __GFP_REPEAT but none of the allocation which uses this
flag is for more than order-0. This means that this flag has never been
actually useful here because it has always been used only for
PAGE_ALLOC_COSTLY requests.
Link: http://lkml.kernel.org/r/1464599699-30131-3-git-send-email-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Michal Hocko [Fri, 24 Jun 2016 21:48:47 +0000 (14:48 -0700)]
tree wide: get rid of __GFP_REPEAT for order-0 allocations part I
This is the third version of the patchset previously sent [1]. I have
basically only rebased it on top of 4.7-rc1 tree and dropped "dm: get
rid of superfluous gfp flags" which went through dm tree. I am sending
it now because it is tree wide and chances for conflicts are reduced
considerably when we want to target rc2. I plan to send the next step
and rename the flag and move to a better semantic later during this
release cycle so we will have a new semantic ready for 4.8 merge window
hopefully.
Motivation:
While working on something unrelated I've checked the current usage of
__GFP_REPEAT in the tree. It seems that a majority of the usage is and
always has been bogus because __GFP_REPEAT has always been about costly
high order allocations while we are using it for order-0 or very small
orders very often. It seems that a big pile of them is just a
copy&paste when a code has been adopted from one arch to another.
I think it makes some sense to get rid of them because they are just
making the semantic more unclear. Please note that GFP_REPEAT is
documented as
* __GFP_REPEAT: Try hard to allocate the memory, but the allocation attempt
* _might_ fail. This depends upon the particular VM implementation.
while !costly requests have basically nofail semantic. So one could
reasonably expect that order-0 request with __GFP_REPEAT will not loop
for ever. This is not implemented right now though.
I would like to move on with __GFP_REPEAT and define a better semantic
for it.
$ git grep __GFP_REPEAT origin/master | wc -l
111
$ git grep __GFP_REPEAT | wc -l
36
So we are down to the third after this patch series. The remaining
places really seem to be relying on __GFP_REPEAT due to large allocation
requests. This still needs some double checking which I will do later
after all the simple ones are sorted out.
I am touching a lot of arch specific code here and I hope I got it right
but as a matter of fact I even didn't compile test for some archs as I
do not have cross compiler for them. Patches should be quite trivial to
review for stupid compile mistakes though. The tricky parts are usually
hidden by macro definitions and thats where I would appreciate help from
arch maintainers.
[1] http://lkml.kernel.org/r/
1461849846-27209-1-git-send-email-mhocko@kernel.org
This patch (of 19):
__GFP_REPEAT has a rather weak semantic but since it has been introduced
around 2.6.12 it has been ignored for low order allocations. Yet we
have the full kernel tree with its usage for apparently order-0
allocations. This is really confusing because __GFP_REPEAT is
explicitly documented to allow allocation failures which is a weaker
semantic than the current order-0 has (basically nofail).
Let's simply drop __GFP_REPEAT from those places. This would allow to
identify place which really need allocator to retry harder and formulate
a more specific semantic for what the flag is supposed to do actually.
Link: http://lkml.kernel.org/r/1464599699-30131-2-git-send-email-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: "James E.J. Bottomley" <jejb@parisc-linux.org>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chen Liqin <liqin.linux@gmail.com>
Cc: Chris Metcalf <cmetcalf@mellanox.com> [for tile]
Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jan Kara <jack@suse.cz>
Cc: John Crispin <blogic@openwrt.org>
Cc: Lennox Wu <lennox.wu@gmail.com>
Cc: Ley Foon Tan <lftan@altera.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Anthony Romano [Fri, 24 Jun 2016 21:48:43 +0000 (14:48 -0700)]
tmpfs: don't undo fallocate past its last page
When fallocate is interrupted it will undo a range that extends one byte
past its range of allocated pages. This can corrupt an in-use page by
zeroing out its first byte. Instead, undo using the inclusive byte
range.
Fixes:
1635f6a74152f1d ("tmpfs: undo fallocation on failure")
Link: http://lkml.kernel.org/r/1462713387-16724-1-git-send-email-anthony.romano@coreos.com
Signed-off-by: Anthony Romano <anthony.romano@coreos.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Hugh Dickins <hughd@google.com>
Cc: Brandon Philips <brandon@ifup.co>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Mike Kravetz [Fri, 24 Jun 2016 21:48:40 +0000 (14:48 -0700)]
selftests/vm/compaction_test: fix write to restore nr_hugepages
The write at the end of the test to restore nr_hugepages to its previous
value is failing. This is because it is trying to write the number of
bytes in the char array as opposed to the number of bytes in the string.
Link: http://lkml.kernel.org/r/1465331205-3284-1-git-send-email-mike.kravetz@oracle.com
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Sri Jayaramappa <sjayaram@akamai.com>
Cc: Eric B Munson <emunson@akamai.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Tetsuo Handa [Fri, 24 Jun 2016 21:48:38 +0000 (14:48 -0700)]
oom_reaper: avoid pointless atomic_inc_not_zero usage.
Since commit
36324a990cf5 ("oom: clear TIF_MEMDIE after oom_reaper
managed to unmap the address space") changed to use find_lock_task_mm()
for finding a mm_struct to reap, it is guaranteed that mm->mm_users > 0
because find_lock_task_mm() returns a task_struct with ->mm != NULL.
Therefore, we can safely use atomic_inc().
Link: http://lkml.kernel.org/r/1465024759-8074-1-git-send-email-penguin-kernel@I-love.SAKURA.ne.jp
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Tetsuo Handa [Fri, 24 Jun 2016 21:48:35 +0000 (14:48 -0700)]
mm,oom_reaper: don't call mmput_async() without atomic_inc_not_zero()
Commit
e2fe14564d33 ("oom_reaper: close race with exiting task") reduced
frequency of needlessly selecting next OOM victim, but was calling
mmput_async() when atomic_inc_not_zero() failed.
Link: http://lkml.kernel.org/r/1464423365-5555-1-git-send-email-penguin-kernel@I-love.SAKURA.ne.jp
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Sat, 25 Jun 2016 00:22:27 +0000 (17:22 -0700)]
Merge tag 'nfsd-4.7-2' of git://linux-nfs.org/~bfields/linux
Pull nfsd bugfixes from Bruce Fields:
"Fix missing server-side permission checks on setting NFS ACLs"
* tag 'nfsd-4.7-2' of git://linux-nfs.org/~bfields/linux:
nfsd: check permissions when setting ACLs
posix_acl: Add set_posix_acl
Linus Torvalds [Sat, 25 Jun 2016 00:07:33 +0000 (17:07 -0700)]
fix up initial thread stack pointer vs thread_info confusion
The INIT_TASK() initializer was similarly confused about the stack vs
thread_info allocation that the allocators had, and that were fixed in
commit
b235beea9e99 ("Clarify naming of thread info/stack allocators").
The task ->stack pointer only incidentally ends up having the same value
as the thread_info, and in fact that will change.
So fix the initial task struct initializer to point to 'init_stack'
instead of 'init_thread_info', and make sure the ia64 definition for
that exists.
This actually makes the ia64 tsk->stack pointer be sensible for the
initial task, but not for any other task. As mentioned in commit
b235beea9e99, that whole pointer isn't actually used on ia64, since
task_stack_page() there just points to the (single) allocation.
All the other architectures seem to have copied the 'init_stack'
definition, even if it tended to be generally unusued.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Fri, 24 Jun 2016 23:55:53 +0000 (16:55 -0700)]
x86: fix up a few misc stack pointer vs thread_info confusions
As the actual pointer value is the same for the thread stack allocation
and the thread_info, code that confused the two worked fine, but will
break when the thread info is moved away from the stack allocation. It
also looks very confusing.
For example, the kprobe code wanted to know the current top of stack.
To do that, it used this:
(unsigned long)current_thread_info() + THREAD_SIZE
which did indeed give the correct value. But it's not only a fairly
nonsensical expression, it's also rather complex, especially since we
actually have this:
static inline unsigned long current_top_of_stack(void)
which not only gives us the value we are interested in, but happens to
be how "current_thread_info()" is currently defined as:
(struct thread_info *)(current_top_of_stack() - THREAD_SIZE);
so using current_thread_info() to figure out the top of the stack really
is a very round-about thing to do.
The other cases are just simpler confusion about task_thread_info() vs
task_stack_page(), which currently return the same pointer - but if you
want the stack page, you really should be using the latter one.
And there was one entirely unused assignment of the current stack to a
thread_info pointer.
All cleaned up to make more sense today, and make it easier to move the
thread_info away from the stack in the future.
No semantic changes.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Fri, 24 Jun 2016 22:09:37 +0000 (15:09 -0700)]
Clarify naming of thread info/stack allocators
We've had the thread info allocated together with the thread stack for
most architectures for a long time (since the thread_info was split off
from the task struct), but that is about to change.
But the patches that move the thread info to be off-stack (and a part of
the task struct instead) made it clear how confused the allocator and
freeing functions are.
Because the common case was that we share an allocation with the thread
stack and the thread_info, the two pointers were identical. That
identity then meant that we would have things like
ti = alloc_thread_info_node(tsk, node);
...
tsk->stack = ti;
which certainly _worked_ (since stack and thread_info have the same
value), but is rather confusing: why are we assigning a thread_info to
the stack? And if we move the thread_info away, the "confusing" code
just gets to be entirely bogus.
So remove all this confusion, and make it clear that we are doing the
stack allocation by renaming and clarifying the function names to be
about the stack. The fact that the thread_info then shares the
allocation is an implementation detail, and not really about the
allocation itself.
This is a pure renaming and type fix: we pass in the same pointer, it's
just that we clarify what the pointer means.
The ia64 code that actually only has one single allocation (for all of
task_struct, thread_info and kernel thread stack) now looks a bit odd,
but since "tsk->stack" is actually not even used there, that oddity
doesn't matter. It would be a separate thing to clean that up, I
intentionally left the ia64 changes as a pure brute-force renaming and
type change.
Acked-by: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Rafael J. Wysocki [Fri, 24 Jun 2016 21:37:23 +0000 (23:37 +0200)]
Merge branches 'pm-devfreq-fixes' and 'pm-cpufreq-fixes'
* pm-devfreq-fixes:
PM / devfreq: Send the DEVFREQ_POSTCHANGE notification when target() is failed
PM / devfreq: fix initialization of current frequency in last status
PM / devfreq: exynos-nocp: Remove incorrect IS_ERR() check
PM / devfreq: remove double put_device
PM / devfreq: fix double call put_device
PM / devfreq: fix duplicated kfree on devfreq pointer
PM / devfreq: devm_kzalloc to have dev pointer more precisely
* pm-cpufreq-fixes:
cpufreq: pcc-cpufreq: Fix doorbell.access_width
Rafael J. Wysocki [Fri, 24 Jun 2016 21:36:20 +0000 (23:36 +0200)]
Merge branch 'acpica-fixes'
* acpica-fixes:
ACPICA: Namespace: Fix deadlock triggered by MLC support in dynamic table loading
Steve French [Thu, 23 Jun 2016 02:07:32 +0000 (21:07 -0500)]
File names with trailing period or space need special case conversion
POSIX allows files with trailing spaces or a trailing period but
SMB3 does not, so convert these using the normal Services For Mac
mapping as we do for other reserved characters such as
: < > | ? *
This is similar to what Macs do for the same problem over SMB3.
CC: Stable <stable@vger.kernel.org>
Signed-off-by: Steve French <steve.french@primarydata.com>
Acked-by: Pavel Shilovsky <pshilovsky@samba.org>
Steve French [Thu, 23 Jun 2016 01:12:05 +0000 (20:12 -0500)]
Fix reconnect to not defer smb3 session reconnect long after socket reconnect
Azure server blocks clients that open a socket and don't do anything on it.
In our reconnect scenarios, we can reconnect the tcp session and
detect the socket is available but we defer the negprot and SMB3 session
setup and tree connect reconnection until the next i/o is requested, but
this looks suspicous to some servers who expect SMB3 negprog and session
setup soon after a socket is created.
In the echo thread, reconnect SMB3 sessions and tree connections
that are disconnected. A later patch will replay persistent (and
resilient) handle opens.
CC: Stable <stable@vger.kernel.org>
Signed-off-by: Steve French <steve.french@primarydata.com>
Acked-by: Pavel Shilovsky <pshilovsky@samba.org>
Ben Hutchings [Wed, 22 Jun 2016 18:43:35 +0000 (19:43 +0100)]
nfsd: check permissions when setting ACLs
Use set_posix_acl, which includes proper permission checks, instead of
calling ->set_acl directly. Without this anyone may be able to grant
themselves permissions to a file by setting the ACL.
Lock the inode to make the new checks atomic with respect to set_acl.
(Also, nfsd was the only caller of set_acl not locking the inode, so I
suspect this may fix other races.)
This also simplifies the code, and ensures our ACLs are checked by
posix_acl_valid.
The permission checks and the inode locking were lost with commit
4ac7249e, which changed nfsd to use the set_acl inode operation directly
instead of going through xattr handlers.
Reported-by: David Sinquin <david@sinquin.eu>
[agreunba@redhat.com: use set_posix_acl]
Fixes:
4ac7249e
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: stable@vger.kernel.org
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Andreas Gruenbacher [Wed, 22 Jun 2016 21:57:25 +0000 (23:57 +0200)]
posix_acl: Add set_posix_acl
Factor out part of posix_acl_xattr_set into a common function that takes
a posix_acl, which nfsd can also call.
The prototype already exists in include/linux/posix_acl.h.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Cc: stable@vger.kernel.org
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Takashi Iwai [Fri, 24 Jun 2016 13:15:26 +0000 (15:15 +0200)]
ALSA: dummy: Fix a use-after-free at closing
syzkaller fuzzer spotted a potential use-after-free case in snd-dummy
driver when hrtimer is used as backend:
> ==================================================================
> BUG: KASAN: use-after-free in rb_erase+0x1b17/0x2010 at addr
ffff88005e5b6f68
> Read of size 8 by task syz-executor/8984
> =============================================================================
> BUG kmalloc-192 (Not tainted): kasan: bad access detected
> -----------------------------------------------------------------------------
>
> Disabling lock debugging due to kernel taint
> INFO: Allocated in 0xbbbbbbbbbbbbbbbb age=
18446705582212484632
> ....
> [< none >] dummy_hrtimer_create+0x49/0x1a0 sound/drivers/dummy.c:464
> ....
> INFO: Freed in 0xfffd8e09 age=
18446705496313138713 cpu=
2164287125 pid=-1
> [< none >] dummy_hrtimer_free+0x68/0x80 sound/drivers/dummy.c:481
> ....
> Call Trace:
> [<
ffffffff8179e59e>] __asan_report_load8_noabort+0x3e/0x40 mm/kasan/report.c:333
> [< inline >] rb_set_parent include/linux/rbtree_augmented.h:111
> [< inline >] __rb_erase_augmented include/linux/rbtree_augmented.h:218
> [<
ffffffff82ca5787>] rb_erase+0x1b17/0x2010 lib/rbtree.c:427
> [<
ffffffff82cb02e8>] timerqueue_del+0x78/0x170 lib/timerqueue.c:86
> [<
ffffffff814d0c80>] __remove_hrtimer+0x90/0x220 kernel/time/hrtimer.c:903
> [< inline >] remove_hrtimer kernel/time/hrtimer.c:945
> [<
ffffffff814d23da>] hrtimer_try_to_cancel+0x22a/0x570 kernel/time/hrtimer.c:1046
> [<
ffffffff814d2742>] hrtimer_cancel+0x22/0x40 kernel/time/hrtimer.c:1066
> [<
ffffffff85420531>] dummy_hrtimer_stop+0x91/0xb0 sound/drivers/dummy.c:417
> [<
ffffffff854228bf>] dummy_pcm_trigger+0x17f/0x1e0 sound/drivers/dummy.c:507
> [<
ffffffff85392170>] snd_pcm_do_stop+0x160/0x1b0 sound/core/pcm_native.c:1106
> [<
ffffffff85391b26>] snd_pcm_action_single+0x76/0x120 sound/core/pcm_native.c:956
> [<
ffffffff85391e01>] snd_pcm_action+0x231/0x290 sound/core/pcm_native.c:974
> [< inline >] snd_pcm_stop sound/core/pcm_native.c:1139
> [<
ffffffff8539754d>] snd_pcm_drop+0x12d/0x1d0 sound/core/pcm_native.c:1784
> [<
ffffffff8539d3be>] snd_pcm_common_ioctl1+0xfae/0x2150 sound/core/pcm_native.c:2805
> [<
ffffffff8539ee91>] snd_pcm_capture_ioctl1+0x2a1/0x5e0 sound/core/pcm_native.c:2976
> [<
ffffffff8539f2ec>] snd_pcm_kernel_ioctl+0x11c/0x160 sound/core/pcm_native.c:3020
> [<
ffffffff853d9a44>] snd_pcm_oss_sync+0x3a4/0xa30 sound/core/oss/pcm_oss.c:1693
> [<
ffffffff853da27d>] snd_pcm_oss_release+0x1ad/0x280 sound/core/oss/pcm_oss.c:2483
> .....
A workaround is to call hrtimer_cancel() in dummy_hrtimer_sync() which
is called certainly before other blocking ops.
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Tested-by: Dmitry Vyukov <dvyukov@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Jaroslav Kysela [Fri, 24 Jun 2016 13:13:16 +0000 (15:13 +0200)]
ALSA: hda / realtek - add two more Thinkpad IDs (5050,5053) for tpt460 fixup
See: https://bugzilla.redhat.com/show_bug.cgi?id=
1349539
See: https://bugzilla.kernel.org/show_bug.cgi?id=120961
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
projects / GitHub / LineageOS / android_kernel_motorola_exynos9610.git / log