perf/x86/amd/ibs: Fix reading of the IBS OpData register and thus precise RIP validity

[ Upstream commit 317b96bb14303c7998dbcd5bc606bd8038fdd4b4 ]

The loop that reads all the IBS MSRs into *buf stopped one MSR short of
reading the IbsOpData register, which contains the RipInvalid status bit.

Fix the offset_max assignment so the MSR gets read, so the RIP invalid
evaluation is based on what the IBS h/w output, instead of what was
left in memory.

Signed-off-by: Kim Phillips <kim.phillips@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Fixes: d47e8238cd76 ("perf/x86-ibs: Take instruction pointer from ibs sample")
Link: https://lkml.kernel.org/r/20191023150955.30292-1-kim.phillips@amd.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: dwc3: remove the call trace of USBx_GFLADJ

[ Upstream commit a7d9874c6f3fbc8d25cd9ceba35b6822612c4ebf ]

layerscape board sometimes reported some usb call trace, that is due to
kernel sent LPM tokerns automatically when it has no pending transfers
and think that the link is idle enough to enter L1, which procedure will
ask usb register has a recovery,then kernel will compare USBx_GFLADJ and
set GFLADJ_30MHZ, GFLADJ_30MHZ_REG until GFLADJ_30MHZ is equal 0x20, if
the conditions were met then issue occur, but whatever the conditions
whether were met that usb is all need keep GFLADJ_30MHZ of value is 0x20
(xhci spec ask use GFLADJ_30MHZ to adjust any offset from clock source
that generates the clock that drives the SOF counter, 0x20 is default
value of it)That is normal logic, so need remove the call trace.

Signed-off-by: Yinbo Zhu <yinbo.zhu@nxp.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: gadget: configfs: fix concurrent issue between composite APIs

[ Upstream commit 1a1c851bbd706ea9f3a9756c2d3db28523506d3b ]

We meet several NULL pointer issues if configfs_composite_unbind
and composite_setup (or composite_disconnect) are running together.
These issues occur when do the function switch stress test, the
configfs_compsoite_unbind is called from user mode by
echo "" to /sys/../UDC entry, and meanwhile, the setup interrupt
or disconnect interrupt occurs by hardware. The composite_setup
will get the cdev from get_gadget_data, but configfs_composite_unbind
will set gadget data as NULL, so the NULL pointer issue occurs.
This concurrent is hard to reproduce by native kernel, but can be
reproduced by android kernel.

In this commit, we introduce one spinlock belongs to structure
gadget_info since we can't use the same spinlock in usb_composite_dev
due to exclusive running together between composite_setup and
configfs_composite_unbind. And one bit flag 'unbind' to indicate the
code is at unbind routine, this bit is needed due to we release the
lock at during configfs_composite_unbind sometimes, and composite_setup
may be run at that time.

Several oops:

oops 1:
android_work: sent uevent USB_STATE=CONNECTED
configfs-gadget gadget: super-speed config #1: b
android_work: sent uevent USB_STATE=CONFIGURED
init: Received control message 'start' for 'adbd' from pid: 3515 (system_server)
Unable to handle kernel NULL pointer dereference at virtual address 0000002a
init: Received control message 'stop' for 'adbd' from pid: 3375 (/vendor/bin/hw/android.hardware.usb@1.1-servic)
Mem abort info:
  Exception class = DABT (current EL), IL = 32 bits
  SET = 0, FnV = 0
  EA = 0, S1PTW = 0
Data abort info:
  ISV = 0, ISS = 0x00000004
  CM = 0, WnR = 0
user pgtable: 4k pages, 48-bit VAs, pgd = ffff8008f1b7f000
[000000000000002a] *pgd=0000000000000000
Internal error: Oops: 96000004 [#1] PREEMPT SMP
Modules linked in:
CPU: 4 PID: 2457 Comm: irq/125-5b11000 Not tainted 4.14.98-07846-g0b40a9b-dirty #16
Hardware name: Freescale i.MX8QM MEK (DT)
task: ffff8008f2a98000 task.stack: ffff00000b7b8000
PC is at composite_setup+0x44/0x1508
LR is at android_setup+0xb8/0x13c
pc : [<ffff0000089ffb3c>] lr : [<ffff000008a032fc>] pstate: 800001c5
sp : ffff00000b7bbb80
x29: ffff00000b7bbb80 x28: ffff8008f2a3c010
x27: 0000000000000001 x26: 0000000000000000                                                          [1232/1897]
audit: audit_lost=25791 audit_rate_limit=5 audit_backlog_limit=64
x25: 00000000ffffffa1 x24: ffff8008f2a3c010
audit: rate limit exceeded
x23: 0000000000000409 x22: ffff000009c8e000
x21: ffff8008f7a8b428 x20: ffff00000afae000
x19: ffff0000089ff000 x18: 0000000000000000
x17: 0000000000000000 x16: ffff0000082b7c9c
x15: 0000000000000000 x14: f1866f5b952aca46
x13: e35502e30d44349c x12: 0000000000000008
x11: 0000000000000008 x10: 0000000000000a30
x9 : ffff00000b7bbd00 x8 : ffff8008f2a98a90
x7 : ffff8008f27a9c90 x6 : 0000000000000001
x5 : 0000000000000000 x4 : 0000000000000001
x3 : 0000000000000000 x2 : 0000000000000006
x1 : ffff0000089ff8d0 x0 : 732a010310b9ed00

X7: 0xffff8008f27a9c10:
9c10  00000002 00000000 00000001 00000000 13110000 ffff0000 00000002 00208040
9c30  00000000 00000000 00000000 00000000 00000000 00000005 00000029 00000000
9c50  00051778 00000001 f27a8e00 ffff8008 00000005 00000000 00000078 00000078
9c70  00000078 00000000 09031d48 ffff0000 00100000 00000000 00400000 00000000
9c90  00000001 00000000 00000000 00000000 00000000 00000000 ffefb1a0 ffff8008
9cb0  f27a9ca8 ffff8008 00000000 00000000 b9d88037 00000173 1618a3eb 00000001
9cd0  870a792a 0000002e 16188fe6 00000001 0000242b 00000000 00000000 00000000
using random self ethernet address
9cf0  019a4646 00000000 000547f3 00000000 ecfd6c33 00000002 00000000
using random host ethernet address
 00000000

X8: 0xffff8008f2a98a10:
8a10  00000000 00000000 f7788d00 ffff8008 00000001 00000000 00000000 00000000
8a30  eb218000 ffff8008 f2a98000 ffff8008 f2a98000 ffff8008 09885000 ffff0000
8a50  f34df480 ffff8008 00000000 00000000 f2a98648 ffff8008 09c8e000 ffff0000
8a70  fff2c800 ffff8008 09031d48 ffff0000 0b7bbd00 ffff0000 0b7bbd00 ffff0000
8a90  080861bc ffff0000 00000000 00000000 00000000 00000000 00000000 00000000
8ab0  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
8ad0  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
8af0  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000

X21: 0xffff8008f7a8b3a8:
b3a8  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
b3c8  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
b3e8  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
b408  00000000 00000000 00000000 00000000 00000000 00000000 00000001 00000000
b428  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
b448  0053004d 00540046 00300031 00010030 eb07b520 ffff8008 20011201 00000003
b468  e418d109 0104404e 00010302 00000000 eb07b558 ffff8008 eb07b558 ffff8008
b488  f7a8b488 ffff8008 f7a8b488 ffff8008 f7a8b300 ffff8008 00000000 00000000

X24: 0xffff8008f2a3bf90:
bf90  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
bfb0  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
bfd0  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
bff0  00000000 00000000 00000000 00000000 f76c8010 ffff8008 f76c8010 ffff8008
c010  00000000 00000000 f2a3c018 ffff8008 f2a3c018 ffff8008 08a067dc ffff0000
c030  f2a5a000 ffff8008 091c3650 ffff0000 f716fd18 ffff8008 f716fe30 ffff8008
c050  f2ce4a30 ffff8008 00000000 00000005 00000000 00000000 095d1568 ffff0000
c070  f76c8010 ffff8008 f2ce4b00 ffff8008 095cac68 ffff0000 f2a5a028 ffff8008

X28: 0xffff8008f2a3bf90:
bf90  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
bfb0  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
bfd0  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
bff0  00000000 00000000 00000000 00000000 f76c8010 ffff8008 f76c8010 ffff8008
c010  00000000 00000000 f2a3c018 ffff8008 f2a3c018 ffff8008 08a067dc ffff0000
c030  f2a5a000 ffff8008 091c3650 ffff0000 f716fd18 ffff8008 f716fe30 ffff8008
c050  f2ce4a30 ffff8008 00000000 00000005 00000000 00000000 095d1568 ffff0000
c070  f76c8010 ffff8008 f2ce4b00 ffff8008 095cac68 ffff0000 f2a5a028 ffff8008

Process irq/125-5b11000 (pid: 2457, stack limit = 0xffff00000b7b8000)
Call trace:
Exception stack(0xffff00000b7bba40 to 0xffff00000b7bbb80)
ba40: 732a010310b9ed00 ffff0000089ff8d0 0000000000000006 0000000000000000
ba60: 0000000000000001 0000000000000000 0000000000000001 ffff8008f27a9c90
ba80: ffff8008f2a98a90 ffff00000b7bbd00 0000000000000a30 0000000000000008
baa0: 0000000000000008 e35502e30d44349c f1866f5b952aca46 0000000000000000
bac0: ffff0000082b7c9c 0000000000000000 0000000000000000 ffff0000089ff000
bae0: ffff00000afae000 ffff8008f7a8b428 ffff000009c8e000 0000000000000409
bb00: ffff8008f2a3c010 00000000ffffffa1 0000000000000000 0000000000000001
bb20: ffff8008f2a3c010 ffff00000b7bbb80 ffff000008a032fc ffff00000b7bbb80
bb40: ffff0000089ffb3c 00000000800001c5 ffff00000b7bbb80 732a010310b9ed00
bb60: ffffffffffffffff ffff0000080f777c ffff00000b7bbb80 ffff0000089ffb3c
[<ffff0000089ffb3c>] composite_setup+0x44/0x1508
[<ffff000008a032fc>] android_setup+0xb8/0x13c
[<ffff0000089bd9a8>] cdns3_ep0_delegate_req+0x44/0x70
[<ffff0000089bdff4>] cdns3_check_ep0_interrupt_proceed+0x33c/0x654
[<ffff0000089bca44>] cdns3_device_thread_irq_handler+0x4b0/0x4bc
[<ffff0000089b77b4>] cdns3_thread_irq+0x48/0x68
[<ffff000008145bf0>] irq_thread_fn+0x28/0x88
[<ffff000008145e38>] irq_thread+0x13c/0x228
[<ffff0000080fed70>] kthread+0x104/0x130
[<ffff000008085064>] ret_from_fork+0x10/0x18

oops2:
composite_disconnect: Calling disconnect on a Gadget that is                      not connected
android_work: did not send uevent (0 0           (null))
init: Received control message 'stop' for 'adbd' from pid: 3359 (/vendor/bin/hw/android.hardware.usb@1.1-service.imx)
init: Sending signal 9 to service 'adbd' (pid 22343) process group...
------------[ cut here ]------------
audit: audit_lost=180038 audit_rate_limit=5 audit_backlog_limit=64
audit: rate limit exceeded
WARNING: CPU: 0 PID: 3468 at kernel_imx/drivers/usb/gadget/composite.c:2009 composite_disconnect+0x80/0x88
Modules linked in:
CPU: 0 PID: 3468 Comm: HWC-UEvent-Thre Not tainted 4.14.98-07846-g0b40a9b-dirty #16
Hardware name: Freescale i.MX8QM MEK (DT)
task: ffff8008f2349c00 task.stack: ffff00000b0a8000
PC is at composite_disconnect+0x80/0x88
LR is at composite_disconnect+0x80/0x88
pc : [<ffff0000089ff9b0>] lr : [<ffff0000089ff9b0>] pstate: 600001c5
sp : ffff000008003dd0
x29: ffff000008003dd0 x28: ffff8008f2349c00
x27: ffff000009885018 x26: ffff000008004000
Timeout for IPC response!
x25: ffff000009885018 x24: ffff000009c8e280
x23: ffff8008f2d98010 x22: 00000000000001c0
x21: ffff8008f2d98394 x20: ffff8008f2d98010
x19: 0000000000000000 x18: 0000e3956f4f075a
fxos8700 4-001e: i2c block read acc failed
x17: 0000e395735727e8 x16: ffff00000829f4d4
x15: ffffffffffffffff x14: 7463656e6e6f6320
x13: 746f6e2009090920 x12: 7369207461687420
x11: 7465676461472061 x10: 206e6f207463656e
x9 : 6e6f637369642067 x8 : ffff000009c8e280
x7 : ffff0000086ca6cc x6 : ffff000009f15e78
x5 : 0000000000000000 x4 : 0000000000000000
x3 : ffffffffffffffff x2 : c3f28b86000c3900
x1 : c3f28b86000c3900 x0 : 000000000000004e

X20: 0xffff8008f2d97f90:
7f90  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
7fb0  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
libprocessgroup: Failed to kill process cgroup uid 0 pid 22343 in 215ms, 1 processes remain
7fd0
Timeout for IPC response!
 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
using random self ethernet address
7ff0  00000000 00000000 00000000 00000000 f76c8010 ffff8008 f76c8010 ffff8008
8010  00000100 00000000 f2d98018 ffff8008 f2d98018 ffff8008 08a067dc
using random host ethernet address
 ffff0000
8030  f206d800 ffff8008 091c3650 ffff0000 f7957b18 ffff8008 f7957730 ffff8008
8050  f716a630 ffff8008 00000000 00000005 00000000 00000000 095d1568 ffff0000
8070  f76c8010 ffff8008 f716a800 ffff8008 095cac68 ffff0000 f206d828 ffff8008

X21: 0xffff8008f2d98314:
8314  ffff8008 00000000 00000000 00000000 00000000 00000000 00000000 00000000
8334  00000000 00000000 00000000 00000000 00000000 08a04cf4 ffff0000 00000000
8354  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
8374  00000000 00000000 00000000 00001001 00000000 00000000 00000000 00000000
8394  e4bbe4bb 0f230000 ffff0000 0afae000 ffff0000 ae001000 00000000 f206d400
Timeout for IPC response!
83b4  ffff8008 00000000 00000000 f7957b18 ffff8008 f7957718 ffff8008 f7957018
83d4  ffff8008 f7957118 ffff8008 f7957618 ffff8008 f7957818 ffff8008 f7957918
83f4  ffff8008 f7957d18 ffff8008 00000000 00000000 00000000 00000000 00000000

X23: 0xffff8008f2d97f90:
7f90  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
7fb0  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
7fd0  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
7ff0  00000000 00000000 00000000 00000000 f76c8010 ffff8008 f76c8010 ffff8008
8010  00000100 00000000 f2d98018 ffff8008 f2d98018 ffff8008 08a067dc ffff0000
8030  f206d800 ffff8008 091c3650 ffff0000 f7957b18 ffff8008 f7957730 ffff8008
8050  f716a630 ffff8008 00000000 00000005 00000000 00000000 095d1568 ffff0000
8070  f76c8010 ffff8008 f716a800 ffff8008 095cac68 ffff0000 f206d828 ffff8008

X28: 0xffff8008f2349b80:
9b80  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
9ba0  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
9bc0  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
9be0  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
9c00  00000022 00000000 ffffffff ffffffff 00010001 00000000 00000000 00000000
9c20  0b0a8000 ffff0000 00000002 00404040 00000000 00000000 00000000 00000000
9c40  00000001 00000000 00000001 00000000 001ebd44 00000001 f390b800 ffff8008
9c60  00000000 00000001 00000070 00000070 00000070 00000000 09031d48 ffff0000

Call trace:
Exception stack(0xffff000008003c90 to 0xffff000008003dd0)
3c80:                                   000000000000004e c3f28b86000c3900
3ca0: c3f28b86000c3900 ffffffffffffffff 0000000000000000 0000000000000000
3cc0: ffff000009f15e78 ffff0000086ca6cc ffff000009c8e280 6e6f637369642067
3ce0: 206e6f207463656e 7465676461472061 7369207461687420 746f6e2009090920
3d00: 7463656e6e6f6320 ffffffffffffffff ffff00000829f4d4 0000e395735727e8
3d20: 0000e3956f4f075a 0000000000000000 ffff8008f2d98010 ffff8008f2d98394
3d40: 00000000000001c0 ffff8008f2d98010 ffff000009c8e280 ffff000009885018
3d60: ffff000008004000 ffff000009885018 ffff8008f2349c00 ffff000008003dd0
3d80: ffff0000089ff9b0 ffff000008003dd0 ffff0000089ff9b0 00000000600001c5
3da0: ffff8008f33f2cd8 0000000000000000 0000ffffffffffff 0000000000000000
init: Received control message 'start' for 'adbd' from pid: 3359 (/vendor/bin/hw/android.hardware.usb@1.1-service.imx)
3dc0: ffff000008003dd0 ffff0000089ff9b0
[<ffff0000089ff9b0>] composite_disconnect+0x80/0x88
[<ffff000008a044d4>] android_disconnect+0x3c/0x68
[<ffff0000089ba9f8>] cdns3_device_irq_handler+0xfc/0x2c8
[<ffff0000089b84c0>] cdns3_irq+0x44/0x94
[<ffff00000814494c>] __handle_irq_event_percpu+0x60/0x24c
[<ffff000008144c0c>] handle_irq_event+0x58/0xc0
[<ffff00000814873c>] handle_fasteoi_irq+0x98/0x180
[<ffff000008143a10>] generic_handle_irq+0x24/0x38
[<ffff000008144170>] __handle_domain_irq+0x60/0xac
[<ffff0000080819c4>] gic_handle_irq+0xd4/0x17c

Signed-off-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: gadget: composite: Fix possible double free memory bug

[ Upstream commit 1c20c89b0421b52b2417bb0f62a611bc669eda1d ]

composite_dev_cleanup call from the failure of configfs_composite_bind
frees up the cdev->os_desc_req and cdev->req. If the previous calls of
bind and unbind is successful these will carry stale values.

Consider the below sequence of function calls:
configfs_composite_bind()
        composite_dev_prepare()
                - Allocate cdev->req, cdev->req->buf
        composite_os_desc_req_prepare()
                - Allocate cdev->os_desc_req, cdev->os_desc_req->buf
configfs_composite_unbind()
        composite_dev_cleanup()
                - free the cdev->os_desc_req->buf and cdev->req->buf
Next composition switch
configfs_composite_bind()
        - If it fails goto err_comp_cleanup will call the
  composite_dev_cleanup() function
        composite_dev_cleanup()
        - calls kfree up with the stale values of cdev->req->buf and
  cdev->os_desc_req from the previous configfs_composite_bind
  call. The free call on these stale values leads to double free.

Hence, Fix this issue by setting request and buffer pointer to NULL after
kfree.

Signed-off-by: Chandana Kishori Chiluveru <cchiluve@codeaurora.org>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: gadget: udc: atmel: Fix interrupt storm in FIFO mode.

[ Upstream commit ba3a1a915c49cc3023e4ddfc88f21e7514e82aa4 ]

Fix interrupt storm generated by endpoints when working in FIFO mode.
The TX_COMPLETE interrupt is used only by control endpoints processing.
Do not enable it for other types of endpoints.

Fixes: 914a3f3b3754 ("USB: add atmel_usba_udc driver")
Signed-off-by: Cristian Birsan <cristian.birsan@microchip.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: fsl: Check memory resource before releasing it

[ Upstream commit bc1e3a2dd0c9954fd956ac43ca2876bbea018c01 ]

Check memory resource existence before releasing it to avoid NULL
pointer dereference

Signed-off-by: Nikhil Badola <nikhil.badola@freescale.com>
Reviewed-by: Ran Wang <ran.wang_1@nxp.com>
Reviewed-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bonding: fix unexpected IFF_BONDING bit unset

[ Upstream commit 65de65d9033750d2cf1b336c9d6e9da3a8b5cc6e ]

The IFF_BONDING means bonding master or bonding slave device.
->ndo_add_slave() sets IFF_BONDING flag and ->ndo_del_slave() unsets
IFF_BONDING flag.

bond0<--bond1

Both bond0 and bond1 are bonding device and these should keep having
IFF_BONDING flag until they are removed.
But bond1 would lose IFF_BONDING at ->ndo_del_slave() because that routine
do not check whether the slave device is the bonding type or not.
This patch adds the interface type check routine before removing
IFF_BONDING flag.

Test commands:
    ip link add bond0 type bond
    ip link add bond1 type bond
    ip link set bond1 master bond0
    ip link set bond1 nomaster
    ip link del bond1 type bond
    ip link add bond1 type bond

Splat looks like:
[  226.665555] proc_dir_entry 'bonding/bond1' already registered
[  226.666440] WARNING: CPU: 0 PID: 737 at fs/proc/generic.c:361 proc_register+0x2a9/0x3e0
[  226.667571] Modules linked in: bonding af_packet sch_fq_codel ip_tables x_tables unix
[  226.668662] CPU: 0 PID: 737 Comm: ip Not tainted 5.4.0-rc3+ #96
[  226.669508] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
[  226.670652] RIP: 0010:proc_register+0x2a9/0x3e0
[  226.671612] Code: 89 fa 48 c1 ea 03 80 3c 02 00 0f 85 39 01 00 00 48 8b 04 24 48 89 ea 48 c7 c7 a0 0b 14 9f 48 8b b0 e
0 00 00 00 e8 07 e7 88 ff <0f> 0b 48 c7 c7 40 2d a5 9f e8 59 d6 23 01 48 8b 4c 24 10 48 b8 00
[  226.675007] RSP: 0018:ffff888050e17078 EFLAGS: 00010282
[  226.675761] RAX: dffffc0000000008 RBX: ffff88805fdd0f10 RCX: ffffffff9dd344e2
[  226.676757] RDX: 0000000000000001 RSI: 0000000000000008 RDI: ffff88806c9f6b8c
[  226.677751] RBP: ffff8880507160f3 R08: ffffed100d940019 R09: ffffed100d940019
[  226.678761] R10: 0000000000000001 R11: ffffed100d940018 R12: ffff888050716008
[  226.679757] R13: ffff8880507160f2 R14: dffffc0000000000 R15: ffffed100a0e2c1e
[  226.680758] FS:  00007fdc217cc0c0(0000) GS:ffff88806c800000(0000) knlGS:0000000000000000
[  226.681886] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  226.682719] CR2: 00007f49313424d0 CR3: 0000000050e46001 CR4: 00000000000606f0
[  226.683727] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  226.684725] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[  226.685681] Call Trace:
[  226.687089]  proc_create_seq_private+0xb3/0xf0
[  226.687778]  bond_create_proc_entry+0x1b3/0x3f0 [bonding]
[  226.691458]  bond_netdev_event+0x433/0x970 [bonding]
[  226.692139]  ? __module_text_address+0x13/0x140
[  226.692779]  notifier_call_chain+0x90/0x160
[  226.693401]  register_netdevice+0x9b3/0xd80
[  226.694010]  ? alloc_netdev_mqs+0x854/0xc10
[  226.694629]  ? netdev_change_features+0xa0/0xa0
[  226.695278]  ? rtnl_create_link+0x2ed/0xad0
[  226.695849]  bond_newlink+0x2a/0x60 [bonding]
[  226.696422]  __rtnl_newlink+0xb9f/0x11b0
[  226.696968]  ? rtnl_link_unregister+0x220/0x220
[ ... ]

Fixes: 0b680e753724 ("[PATCH] bonding: Add priv_flag to avoid event mishandling")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ipvs: move old_secure_tcp into struct netns_ipvs

[ Upstream commit c24b75e0f9239e78105f81c5f03a751641eb07ef ]

syzbot reported the following issue :

BUG: KCSAN: data-race in update_defense_level / update_defense_level

read to 0xffffffff861a6260 of 4 bytes by task 3006 on cpu 1:
 update_defense_level+0x621/0xb30 net/netfilter/ipvs/ip_vs_ctl.c:177
 defense_work_handler+0x3d/0xd0 net/netfilter/ipvs/ip_vs_ctl.c:225
 process_one_work+0x3d4/0x890 kernel/workqueue.c:2269
 worker_thread+0xa0/0x800 kernel/workqueue.c:2415
 kthread+0x1d4/0x200 drivers/block/aoe/aoecmd.c:1253
 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:352

write to 0xffffffff861a6260 of 4 bytes by task 7333 on cpu 0:
 update_defense_level+0xa62/0xb30 net/netfilter/ipvs/ip_vs_ctl.c:205
 defense_work_handler+0x3d/0xd0 net/netfilter/ipvs/ip_vs_ctl.c:225
 process_one_work+0x3d4/0x890 kernel/workqueue.c:2269
 worker_thread+0xa0/0x800 kernel/workqueue.c:2415
 kthread+0x1d4/0x200 drivers/block/aoe/aoecmd.c:1253
 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:352

Reported by Kernel Concurrency Sanitizer on:
CPU: 0 PID: 7333 Comm: kworker/0:5 Not tainted 5.4.0-rc3+ #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Workqueue: events defense_work_handler

Indeed, old_secure_tcp is currently a static variable, while it
needs to be a per netns variable.

Fixes: a0840e2e165a ("IPVS: netns, ip_vs_ctl local vars moved to ipvs struct.")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: lpfc: Honor module parameter lpfc_use_adisc

[ Upstream commit 0fd103ccfe6a06e40e2d9d8c91d96332cc9e1239 ]

The initial lpfc_desc_set_adisc implementation in commit
dea3101e0a5c ("lpfc: add Emulex FC driver version 8.0.28") enabled ADISC if

cfg_use_adisc && RSCN_MODE && FCP_2_DEVICE

In commit 92d7f7b0cde3 ("[SCSI] lpfc: NPIV: add NPIV support on top of
SLI-3") this changed to

(cfg_use_adisc && RSC_MODE) || FCP_2_DEVICE

and later in commit ffc954936b13 ("[SCSI] lpfc 8.3.13: FC Discovery Fixes
and enhancements.") to

(cfg_use_adisc && RSC_MODE) || (FCP_2_DEVICE && FCP_TARGET)

A customer reports that after a devloss, an ADISC failure is logged. It
turns out the ADISC flag is set even the user explicitly set lpfc_use_adisc
= 0.

[Sat Dec 22 22:55:58 2018] lpfc 0000:82:00.0: 2:(0):0203 Devloss timeout on WWPN 50:01:43:80:12:8e:40:20 NPort x05df00 Data: x82000000 x8 xa
[Sat Dec 22 23:08:20 2018] lpfc 0000:82:00.0: 2:(0):2755 ADISC failure DID:05DF00 Status:x9/x70000

[mkp: fixed Hannes' email]

Fixes: 92d7f7b0cde3 ("[SCSI] lpfc: NPIV: add NPIV support on top of SLI-3")
Cc: Dick Kennedy <dick.kennedy@broadcom.com>
Cc: James Smart <james.smart@broadcom.com>
Link: https://lore.kernel.org/r/20191022072112.132268-1-dwagner@suse.de
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: qla2xxx: fixup incorrect usage of host_byte

[ Upstream commit 66cf50e65b183c863825f5c28a818e3f47a72e40 ]

DRIVER_ERROR is a a driver byte setting, not a host byte.  The qla2xxx
driver should rather return DID_ERROR here to be in line with the other
drivers.

Link: https://lore.kernel.org/r/20191018140458.108278-1-hare@suse.de
Signed-off-by: Hannes Reinecke <hare@suse.com>
Acked-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

HID: intel-ish-hid: fix wrong error handling in ishtp_cl_alloc_tx_ring()

[ Upstream commit 16ff7bf6dbcc6f77d2eec1ac9120edf44213c2f1 ]

When allocating tx ring buffers failed, should free tx buffers, not rx buffers.

Signed-off-by: Zhang Lixu <lixu.zhang@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dmaengine: xilinx_dma: Fix control reg update in vdma_channel_set_config

[ Upstream commit 6c6de1ddb1be3840f2ed5cc9d009a622720940c9 ]

In vdma_channel_set_config clear the delay, frame count and master mask
before updating their new values. It avoids programming incorrect state
when input parameters are different from default.

Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com>
Acked-by: Appana Durga Kedareswara rao <appana.durga.rao@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Link: https://lore.kernel.org/r/1569495060-18117-3-git-send-email-radhey.shyam.pandey@xilinx.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

PCI: tegra: Enable Relaxed Ordering only for Tegra20 & Tegra30

commit 7be142caabc4780b13a522c485abc806de5c4114 upstream.

The PCI Tegra controller conversion to a device tree configurable
driver in commit d1523b52bff3 ("PCI: tegra: Move PCIe driver
to drivers/pci/host") implied that code for the driver can be
compiled in for a kernel supporting multiple platforms.

Unfortunately, a blind move of the code did not check that some of the
quirks that were applied in arch/arm (eg enabling Relaxed Ordering on
all PCI devices - since the quirk hook erroneously matches PCI_ANY_ID
for both Vendor-ID and Device-ID) are now applied in all kernels that
compile the PCI Tegra controlled driver, DT and ACPI alike.

This is completely wrong, in that enablement of Relaxed Ordering is only
required by default in Tegra20 platforms as described in the Tegra20
Technical Reference Manual (available at
https://developer.nvidia.com/embedded/downloads#?search=tegra%202 in
Section 34.1, where it is mentioned that Relaxed Ordering bit needs to
be enabled in its root ports to avoid deadlock in hardware) and in the
Tegra30 platforms for the same reasons (unfortunately not documented
in the TRM).

There is no other strict requirement on PCI devices Relaxed Ordering
enablement on any other Tegra platforms or PCI host bridge driver.

Fix this quite upsetting situation by limiting the vendor and device IDs
to which the Relaxed Ordering quirk applies to the root ports in
question, reported above.

Signed-off-by: Vidya Sagar <vidyas@nvidia.com>
[lorenzo.pieralisi@arm.com: completely rewrote the commit log/fixes tag]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers: usb: usbip: Add missing break statement to switch

commit 7c92e5fbf4dac0dd4dd41a0383adc54f16f403e2 upstream.

Add missing break statement to prevent the code for case
USB_PORT_FEAT_C_RESET falling through to the default case.

Addresses-Coverity-ID: 143155
Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usbip: fix possibility of dereference by NULLL pointer in vhci_hcd.c

commit d79cda045e3bacb7e754a5324cd3d4ce80708eb1 upstream.

This patch fixes possibility of dereference by NULLL pointer in "[PATCH
v5 1/3] usbip: vhci extension: modifications to vhci driver" which has
been merged to 4.9-rc1. It occurs when a URB with pointer to invalid
USB/IP device is enqueued in race condition against detach operation.

A pointer was passed to vdev_to_vhci() before NULL check.
In vdev_to_vhci(), there's a dereference by the pointer.

This patch moves vdev_to_vhci() after NULL check of the pointer.

Signed-off-by: Nobuo Iwata <nobuo.iwata@fujixerox.co.jp>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usbip: Fix vhci_urb_enqueue() URB null transfer buffer error path

commit 2c904963b1dd2acd4bc785b6c72e10a6283c2081 upstream.

Fix vhci_urb_enqueue() to print debug msg and return error instead of
failing with BUG_ON.

Signed-off-by: Shuah Khan <shuah@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usbip: stub_rx: fix static checker warning on unnecessary checks

commit 10c90120930628e8b959bf58d4a0aaef3ae5d945 upstream.

Fix the following static checker warnings:

The patch c6688ef9f297: "usbip: fix stub_rx: harden CMD_SUBMIT path
to handle malicious input" from Dec 7, 2017, leads to the following
static checker warning:

    drivers/usb/usbip/stub_rx.c:346 get_pipe()
    warn: impossible condition
'(pdu->u.cmd_submit.transfer_buffer_length > ((~0 >> 1))) =>
(s32min-s32max > s32max)'
    drivers/usb/usbip/stub_rx.c:486 stub_recv_cmd_submit()
    warn: always true condition
'(pdu->u.cmd_submit.transfer_buffer_length <= ((~0 >> 1))) =>
(s32min-s32max <= s32max)'

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

configfs: fix a deadlock in configfs_symlink()

commit 351e5d869e5ac10cb40c78b5f2d7dfc816ad4587 upstream.

Configfs abuses symlink(2).  Unlike the normal filesystems, it
wants the target resolved at symlink(2) time, like link(2) would've
done.  The problem is that ->symlink() is called with the parent
directory locked exclusive, so resolving the target inside the
->symlink() is easily deadlocked.

Short of really ugly games in sys_symlink() itself, all we can
do is to unlock the parent before resolving the target and
relock it after.  However, that invalidates the checks done
by the caller of ->symlink(), so we have to
* check that dentry is still where it used to be
(it couldn't have been moved, but it could've been unhashed)
* recheck that it's still negative (somebody else
might've successfully created a symlink with the same name
while we were looking the target up)
* recheck the permissions on the parent directory.

Cc: stable@vger.kernel.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

configfs: provide exclusion between IO and removals

commit b0841eefd9693827afb9888235e26ddd098f9cef upstream.

Make sure that attribute methods are not called after the item
has been removed from the tree.  To do so, we
* at the point of no return in removals, grab ->frag_sem
exclusive and mark the fragment dead.
* call the methods of attributes with ->frag_sem taken
shared and only after having verified that the fragment is still
alive.

The main benefit is for method instances - they are
guaranteed that the objects they are accessing *and* all ancestors
are still there.  Another win is that we don't need to bother
with extra refcount on config_item when opening a file -
the item will be alive for as long as it stays in the tree, and
we won't touch it/attributes/any associated data after it's
been removed from the tree.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

configfs: new object reprsenting tree fragments

commit 47320fbe11a6059ae502c9c16b668022fdb4cf76 upstream.

Refcounted, hangs of configfs_dirent, created by operations that add
fragments to configfs tree (mkdir and configfs_register_{subsystem,group}).
Will be used in the next commit to provide exclusion between fragment
removal and ->show/->store calls.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

configfs_register_group() shouldn't be (and isn't) called in rmdirable parts

commit f19e4ed1e1edbfa3c9ccb9fed17759b7d6db24c6 upstream.

revert cc57c07343bd "configfs: fix registered group removal"
It was an attempt to handle something that fundamentally doesn't
work - configfs_register_group() should never be done in a part
of tree that can be rmdir'ed.  And in mainline it never had been,
so let's not borrow trouble; the fix was racy anyway, it would take
a lot more to make that work and desired semantics is not clear.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

configfs: stash the data we need into configfs_buffer at open time

commit ff4dd081977da56566a848f071aed8fa92d604a1 upstream.

simplifies the ->read()/->write()/->release() instances nicely

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

configfs: Fix bool initialization/comparison

commit 3f6928c347707a65cee10a9f54b85ad5fb078b3f upstream.

Bool initializations should use true and false. Bool tests don't need
comparisons.

Signed-off-by: Thomas Meyer <thomas@m3y3r.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

can: peak_usb: fix slab info leak

commit f7a1337f0d29b98733c8824e165fca3371d7d4fd upstream.

Fix a small slab info leak due to a failure to clear the command buffer
at allocation.

The first 16 bytes of the command buffer are always sent to the device
in pcan_usb_send_cmd() even though only the first two may have been
initialised in case no argument payload is provided (e.g. when waiting
for a response).

Fixes: bb4785551f64 ("can: usb: PEAK-System Technik USB adapters driver core")
Cc: stable <stable@vger.kernel.org> # 3.4
Reported-by: syzbot+863724e7128e14b26732@syzkaller.appspotmail.com
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

can: gs_usb: gs_can_open(): prevent memory leak

commit fb5be6a7b4863ecc44963bb80ca614584b6c7817 upstream.

In gs_can_open() if usb_submit_urb() fails the allocated urb should be
released.

Fixes: d08e973a77d1 ("can: gs_usb: Added support for the GS_USB CAN devices")
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

can: peak_usb: fix a potential out-of-sync while decoding packets

commit de280f403f2996679e2607384980703710576fed upstream.

When decoding a buffer received from PCAN-USB, the first timestamp read in
a packet is a 16-bit coded time base, and the next ones are an 8-bit
offset to this base, regardless of the type of packet read.

This patch corrects a potential loss of synchronization by using a
timestamp index read from the buffer, rather than an index of received
data packets, to determine on the sizeof the timestamp to be read from the
packet being decoded.

Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com>
Fixes: 46be265d3388 ("can: usb: PEAK-System Technik PCAN-USB specific part")
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

can: c_can: c_can_poll(): only read status register after status IRQ

commit 3cb3eaac52c0f145d895f4b6c22834d5f02b8569 upstream.

When the status register is read without the status IRQ pending, the
chip may not raise the interrupt line for an upcoming status interrupt
and the driver may miss a status interrupt.

It is critical that the BUSOFF status interrupt is forwarded to the
higher layers, since no more interrupts will follow without
intervention.

Thanks to Wolfgang and Joe for bringing up the first idea.

Signed-off-by: Kurt Van Dijck <dev.kurt@vandijck-laurijssen.be>
Cc: Wolfgang Grandegger <wg@grandegger.com>
Cc: Joe Burmeister <joe.burmeister@devtank.co.uk>
Fixes: fa39b54ccf28 ("can: c_can: Get rid of pointless interrupts")
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

can: usb_8dev: fix use-after-free on disconnect

commit 3759739426186a924675651b388d1c3963c5710e upstream.

The driver was accessing its driver data after having freed it.

Fixes: 0024d8ad1639 ("can: usb_8dev: Add support for USB2CAN interface from 8 devices")
Cc: stable <stable@vger.kernel.org> # 3.9
Cc: Bernd Krumboeck <b.krumboeck@gmail.com>
Cc: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netfilter: ipset: Fix an error code in ip_set_sockfn_get()

commit 30b7244d79651460ff114ba8f7987ed94c86b99a upstream.

The copy_to_user() function returns the number of bytes remaining to be
copied.  In this code, that positive return is checked at the end of the
function and we return zero/success.  What we should do instead is
return -EFAULT.

Fixes: a7b4f989a629 ("netfilter: ipset: IP set core support")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jozsef Kadlecsik <kadlec@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netfilter: nf_tables: Align nft_expr private data to 64-bit

commit 250367c59e6ba0d79d702a059712d66edacd4a1a upstream.

Invoking the following commands on a 32-bit architecture with strict
alignment requirements (such as an ARMv7-based Raspberry Pi) results
in an alignment exception:

 # nft add table ip test-ip4
 # nft add chain ip test-ip4 output { type filter hook output priority 0; }
 # nft add rule  ip test-ip4 output quota 1025 bytes

Alignment trap: not handling instruction e1b26f9f at [<7f4473f8>]
Unhandled fault: alignment exception (0x001) at 0xb832e824
Internal error: : 1 [#1] PREEMPT SMP ARM
Hardware name: BCM2835
[<7f4473fc>] (nft_quota_do_init [nft_quota])
[<7f447448>] (nft_quota_init [nft_quota])
[<7f4260d0>] (nf_tables_newrule [nf_tables])
[<7f4168dc>] (nfnetlink_rcv_batch [nfnetlink])
[<7f416bd0>] (nfnetlink_rcv [nfnetlink])
[<8078b334>] (netlink_unicast)
[<8078b664>] (netlink_sendmsg)
[<8071b47c>] (sock_sendmsg)
[<8071bd18>] (___sys_sendmsg)
[<8071ce3c>] (__sys_sendmsg)
[<8071ce94>] (sys_sendmsg)

The reason is that nft_quota_do_init() calls atomic64_set() on an
atomic64_t which is only aligned to 32-bit, not 64-bit, because it
succeeds struct nft_expr in memory which only contains a 32-bit pointer.
Fix by aligning the nft_expr private data to 64-bit.

Fixes: 96518518cc41 ("netfilter: add nftables")
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Cc: stable@vger.kernel.org # v3.13+
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: imu: adis16480: make sure provided frequency is positive

commit 24e1eb5c0d78cfb9750b690bbe997d4d59170258 upstream.

It could happen that either `val` or `val2` [provided from userspace] is
negative. In that case the computed frequency could get a weird value.

Fix this by checking that neither of the 2 variables is negative, and check
that the computed result is not-zero.

Fixes: e4f959390178 ("iio: imu: adis16480 switch sampling frequency attr to core support")
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ceph: fix use-after-free in __ceph_remove_cap()

commit ea60ed6fcf29eebc78f2ce91491e6309ee005a01 upstream.

KASAN reports a use-after-free when running xfstest generic/531, with the
following trace:

[  293.903362]  kasan_report+0xe/0x20
[  293.903365]  rb_erase+0x1f/0x790
[  293.903370]  __ceph_remove_cap+0x201/0x370
[  293.903375]  __ceph_remove_caps+0x4b/0x70
[  293.903380]  ceph_evict_inode+0x4e/0x360
[  293.903386]  evict+0x169/0x290
[  293.903390]  __dentry_kill+0x16f/0x250
[  293.903394]  dput+0x1c6/0x440
[  293.903398]  __fput+0x184/0x330
[  293.903404]  task_work_run+0xb9/0xe0
[  293.903410]  exit_to_usermode_loop+0xd3/0xe0
[  293.903413]  do_syscall_64+0x1a0/0x1c0
[  293.903417]  entry_SYSCALL_64_after_hwframe+0x44/0xa9

This happens because __ceph_remove_cap() may queue a cap release
(__ceph_queue_cap_release) which can be scheduled before that cap is
removed from the inode list with

rb_erase(&cap->ci_node, &ci->i_caps);

And, when this finally happens, the use-after-free will occur.

This can be fixed by removing the cap from the inode list before being
removed from the session list, and thus eliminating the risk of an UAF.

Cc: stable@vger.kernel.org
Signed-off-by: Luis Henriques <lhenriques@suse.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/radeon: fix si_enable_smc_cac() failed issue

commit 2c409ba81be25516afe05ae27a4a15da01740b01 upstream.

Need to set the dte flag on this asic.

Port the fix from amdgpu:
5cb818b861be114 ("drm/amd/amdgpu: fix si_enable_smc_cac() failed issue")

Reviewed-by: Yong Zhao <yong.zhao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf tools: Fix time sorting

commit 722ddfde366fd46205456a9c5ff9b3359dc9a75e upstream.

The final sort might get confused when the comparison is done over
bigger numbers than int like for -s time.

Check the following report for longer workloads:

  $ perf report -s time -F time,overhead --stdio

Fix hist_entry__sort() to properly return int64_t and not possible cut
int.

Fixes: 043ca389a318 ("perf tools: Use hpp formats to sort final output")
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: stable@vger.kernel.org # v3.16+
Link: http://lore.kernel.org/lkml/20191104232711.16055-1-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dump_stack: avoid the livelock of the dump_lock

commit 5cbf2fff3bba8d3c6a4d47c1754de1cf57e2b01f upstream.

In the current code, we use the atomic_cmpxchg() to serialize the output
of the dump_stack(), but this implementation suffers the thundering herd
problem.  We have observed such kind of livelock on a Marvell cn96xx
board(24 cpus) when heavily using the dump_stack() in a kprobe handler.
Actually we can let the competitors to wait for the releasing of the
lock before jumping to atomic_cmpxchg().  This will definitely mitigate
the thundering herd problem.  Thanks Linus for the suggestion.

[akpm@linux-foundation.org: fix comment]
Link: http://lkml.kernel.org/r/20191030031637.6025-1-haokexin@gmail.com
Fixes: b58d977432c8 ("dump_stack: serialize the output from dump_stack()")
Signed-off-by: Kevin Hao <haokexin@gmail.com>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm, vmstat: hide /proc/pagetypeinfo from normal users

commit abaed0112c1db08be15a784a2c5c8a8b3063cdd3 upstream.

/proc/pagetypeinfo is a debugging tool to examine internal page
allocator state wrt to fragmentation.  It is not very useful for any
other use so normal users really do not need to read this file.

Waiman Long has noticed that reading this file can have negative side
effects because zone->lock is necessary for gathering data and that a)
interferes with the page allocator and its users and b) can lead to hard
lockups on large machines which have very long free_list.

Reduce both issues by simply not exporting the file to regular users.

Link: http://lkml.kernel.org/r/20191025072610.18526-2-mhocko@kernel.org
Fixes: 467c996c1e19 ("Print out statistics in relation to fragmentation avoidance to /proc/pagetypeinfo")
Signed-off-by: Michal Hocko <mhocko@suse.com>
Reported-by: Waiman Long <longman@redhat.com>
Acked-by: Mel Gorman <mgorman@suse.de>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Waiman Long <longman@redhat.com>
Acked-by: Rafael Aquini <aquini@redhat.com>
Acked-by: David Rientjes <rientjes@google.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Roman Gushchin <guro@fb.com>
Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Cc: Jann Horn <jannh@google.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm: thp: handle page cache THP correctly in PageTransCompoundMap

commit 169226f7e0d275c1879551f37484ef6683579a5c upstream.

We have a usecase to use tmpfs as QEMU memory backend and we would like
to take the advantage of THP as well.  But, our test shows the EPT is
not PMD mapped even though the underlying THP are PMD mapped on host.
The number showed by /sys/kernel/debug/kvm/largepage is much less than
the number of PMD mapped shmem pages as the below:

  7f2778200000-7f2878200000 rw-s 00000000 00:14 262232 /dev/shm/qemu_back_mem.mem.Hz2hSf (deleted)
  Size:            4194304 kB
  [snip]
  AnonHugePages:         0 kB
  ShmemPmdMapped:   579584 kB
  [snip]
  Locked:                0 kB

  cat /sys/kernel/debug/kvm/largepages
  12

And some benchmarks do worse than with anonymous THPs.

By digging into the code we figured out that commit 127393fbe597 ("mm:
thp: kvm: fix memory corruption in KVM with THP enabled") checks if
there is a single PTE mapping on the page for anonymous THP when setting
up EPT map.  But the _mapcount < 0 check doesn't work for page cache THP
since every subpage of page cache THP would get _mapcount inc'ed once it
is PMD mapped, so PageTransCompoundMap() always returns false for page
cache THP.  This would prevent KVM from setting up PMD mapped EPT entry.

So we need handle page cache THP correctly.  However, when page cache
THP's PMD gets split, kernel just remove the map instead of setting up
PTE map like what anonymous THP does.  Before KVM calls get_user_pages()
the subpages may get PTE mapped even though it is still a THP since the
page cache THP may be mapped by other processes at the mean time.

Checking its _mapcount and whether the THP has PTE mapped or not.
Although this may report some false negative cases (PTE mapped by other
processes), it looks not trivial to make this accurate.

With this fix /sys/kernel/debug/kvm/largepage would show reasonable
pages are PMD mapped by EPT as the below:

  7fbeaee00000-7fbfaee00000 rw-s 00000000 00:14 275464 /dev/shm/qemu_back_mem.mem.SKUvat (deleted)
  Size:            4194304 kB
  [snip]
  AnonHugePages:         0 kB
  ShmemPmdMapped:   557056 kB
  [snip]
  Locked:                0 kB

  cat /sys/kernel/debug/kvm/largepages
  271

And the benchmarks are as same as anonymous THPs.

[yang.shi@linux.alibaba.com: v4]
Link: http://lkml.kernel.org/r/1571865575-42913-1-git-send-email-yang.shi@linux.alibaba.com
Link: http://lkml.kernel.org/r/1571769577-89735-1-git-send-email-yang.shi@linux.alibaba.com
Fixes: dd78fedde4b9 ("rmap: support file thp")
Signed-off-by: Yang Shi <yang.shi@linux.alibaba.com>
Reported-by: Gang Deng <gavin.dg@linux.alibaba.com>
Tested-by: Gang Deng <gavin.dg@linux.alibaba.com>
Suggested-by: Hugh Dickins <hughd@google.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: <stable@vger.kernel.org> [4.8+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/ca0132 - Fix possible workqueue stall

commit 15c2b3cc09a31620914955cb2a89c277c18ee999 upstream.

The unsolicited event handler for the headphone jack on CA0132 codec
driver tries to reschedule the another delayed work with
cancel_delayed_work_sync().  It's no good idea, unfortunately,
especially after we changed the work queue to the standard global
one; this may lead to a stall because both works are using the same
global queue.

Fix it by dropping the _sync but does call cancel_delayed_work()
instead.

Fixes: 993884f6a26c ("ALSA: hda/ca0132 - Delay HP amp turnon.")
BugLink: https://bugzilla.suse.com/show_bug.cgi?id=1155836
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20191105134316.19294-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: bebob: fix to detect configured source of sampling clock for Focusrite Saffire Pro i/o series

commit 706ad6746a66546daf96d4e4a95e46faf6cf689a upstream.

For Focusrite Saffire Pro i/o, the lowest 8 bits of register represents
configured source of sampling clock. The next lowest 8 bits represents
whether the configured source is actually detected or not just after
the register is changed for the source.

Current implementation evaluates whole the register to detect configured
source. This results in failure due to the next lowest 8 bits when the
source is connected in advance.

This commit fixes the bug.

Fixes: 25784ec2d034 ("ALSA: bebob: Add support for Focusrite Saffire/SaffirePro series")
Cc: <stable@vger.kernel.org> # v3.16+
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20191102150920.20367-1-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: timer: Fix incorrectly assigned timer instance

commit e7af6307a8a54f0b873960b32b6a644f2d0fbd97 upstream.

The clean up commit 41672c0c24a6 ("ALSA: timer: Simplify error path in
snd_timer_open()") unified the error handling code paths with the
standard goto, but it introduced a subtle bug: the timer instance is
stored in snd_timer_open() incorrectly even if it returns an error.
This may eventually lead to UAF, as spotted by fuzzer.

The culprit is the snd_timer_open() code checks the
SNDRV_TIMER_IFLG_EXCLUSIVE flag with the common variable timeri.
This variable is supposed to be the newly created instance, but we
(ab-)used it for a temporary check before the actual creation of a
timer instance.  After that point, there is another check for the max
number of instances, and it bails out if over the threshold.  Before
the refactoring above, it worked fine because the code returned
directly from that point.  After the refactoring, however, it jumps to
the unified error path that stores the timeri variable in return --
even if it returns an error.  Unfortunately this stored value is kept
in the caller side (snd_timer_user_tselect()) in tu->timeri.  This
causes inconsistency later, as if the timer was successfully
assigned.

In this patch, we fix it by not re-using timeri variable but a
temporary variable for testing the exclusive connection, so timeri
remains NULL at that point.

Fixes: 41672c0c24a6 ("ALSA: timer: Simplify error path in snd_timer_open()")
Reported-and-tested-by: Tristan Madani <tristmd@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20191106165547.23518-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

qede: fix NULL pointer deref in __qede_remove()

[ Upstream commit deabc87111c690097c03765ea017cd500f7376fc ]

While rebooting the system with SR-IOV vfs enabled leads
to below crash due to recurrence of __qede_remove() on the VF
devices (first from .shutdown() flow of the VF itself and
another from PF's .shutdown() flow executing pci_disable_sriov())

This patch adds a safeguard in __qede_remove() flow to fix this,
so that driver doesn't attempt to remove "already removed" devices.

[  194.360134] BUG: unable to handle kernel NULL pointer dereference at 00000000000008dc
[  194.360227] IP: [<ffffffffc03553c4>] __qede_remove+0x24/0x130 [qede]
[  194.360304] PGD 0
[  194.360325] Oops: 0000 [#1] SMP
[  194.360360] Modules linked in: tcp_lp fuse tun bridge stp llc devlink bonding ip_set nfnetlink ib_isert iscsi_target_mod ib_srpt target_core_mod ib_srp scsi_transport_srp scsi_tgt ib_ipoib ib_umad rpcrdma sunrpc rdma_ucm ib_uverbs ib_iser rdma_cm iw_cm ib_cm libiscsi scsi_transport_iscsi dell_smbios iTCO_wdt iTCO_vendor_support dell_wmi_descriptor dcdbas vfat fat pcc_cpufreq skx_edac intel_powerclamp coretemp intel_rapl iosf_mbi kvm_intel kvm irqbypass crc32_pclmul ghash_clmulni_intel aesni_intel lrw gf128mul glue_helper ablk_helper cryptd qedr ib_core pcspkr ses enclosure joydev ipmi_ssif sg i2c_i801 lpc_ich mei_me mei wmi ipmi_si ipmi_devintf ipmi_msghandler tpm_crb acpi_pad acpi_power_meter xfs libcrc32c sd_mod crc_t10dif crct10dif_generic crct10dif_pclmul crct10dif_common crc32c_intel mgag200
[  194.361044]  qede i2c_algo_bit drm_kms_helper qed syscopyarea sysfillrect nvme sysimgblt fb_sys_fops ttm nvme_core mpt3sas crc8 ptp drm pps_core ahci raid_class scsi_transport_sas libahci libata drm_panel_orientation_quirks nfit libnvdimm dm_mirror dm_region_hash dm_log dm_mod [last unloaded: ip_tables]
[  194.361297] CPU: 51 PID: 7996 Comm: reboot Kdump: loaded Not tainted 3.10.0-1062.el7.x86_64 #1
[  194.361359] Hardware name: Dell Inc. PowerEdge MX840c/0740HW, BIOS 2.4.6 10/15/2019
[  194.361412] task: ffff9cea9b360000 ti: ffff9ceabebdc000 task.ti: ffff9ceabebdc000
[  194.361463] RIP: 0010:[<ffffffffc03553c4>]  [<ffffffffc03553c4>] __qede_remove+0x24/0x130 [qede]
[  194.361534] RSP: 0018:ffff9ceabebdfac0  EFLAGS: 00010282
[  194.361570] RAX: 0000000000000000 RBX: ffff9cd013846098 RCX: 0000000000000000
[  194.361621] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff9cd013846098
[  194.361668] RBP: ffff9ceabebdfae8 R08: 0000000000000000 R09: 0000000000000000
[  194.361715] R10: 00000000bfe14201 R11: ffff9ceabfe141e0 R12: 0000000000000000
[  194.361762] R13: ffff9cd013846098 R14: 0000000000000000 R15: ffff9ceab5e48000
[  194.361810] FS:  00007f799c02d880(0000) GS:ffff9ceacb0c0000(0000) knlGS:0000000000000000
[  194.361865] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  194.361903] CR2: 00000000000008dc CR3: 0000001bdac76000 CR4: 00000000007607e0
[  194.361953] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  194.362002] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[  194.362051] PKRU: 55555554
[  194.362073] Call Trace:
[  194.362109]  [<ffffffffc0355500>] qede_remove+0x10/0x20 [qede]
[  194.362180]  [<ffffffffb97d0f3e>] pci_device_remove+0x3e/0xc0
[  194.362240]  [<ffffffffb98b3c52>] __device_release_driver+0x82/0xf0
[  194.362285]  [<ffffffffb98b3ce3>] device_release_driver+0x23/0x30
[  194.362343]  [<ffffffffb97c86d4>] pci_stop_bus_device+0x84/0xa0
[  194.362388]  [<ffffffffb97c87e2>] pci_stop_and_remove_bus_device+0x12/0x20
[  194.362450]  [<ffffffffb97f153f>] pci_iov_remove_virtfn+0xaf/0x160
[  194.362496]  [<ffffffffb97f1aec>] sriov_disable+0x3c/0xf0
[  194.362534]  [<ffffffffb97f1bc3>] pci_disable_sriov+0x23/0x30
[  194.362599]  [<ffffffffc02f83c3>] qed_sriov_disable+0x5e3/0x650 [qed]
[  194.362658]  [<ffffffffb9622df6>] ? kfree+0x106/0x140
[  194.362709]  [<ffffffffc02cc0c0>] ? qed_free_stream_mem+0x70/0x90 [qed]
[  194.362754]  [<ffffffffb9622df6>] ? kfree+0x106/0x140
[  194.362803]  [<ffffffffc02cd659>] qed_slowpath_stop+0x1a9/0x1d0 [qed]
[  194.362854]  [<ffffffffc035544e>] __qede_remove+0xae/0x130 [qede]
[  194.362904]  [<ffffffffc03554e0>] qede_shutdown+0x10/0x20 [qede]
[  194.362956]  [<ffffffffb97cf90a>] pci_device_shutdown+0x3a/0x60
[  194.363010]  [<ffffffffb98b180b>] device_shutdown+0xfb/0x1f0
[  194.363066]  [<ffffffffb94b66c6>] kernel_restart_prepare+0x36/0x40
[  194.363107]  [<ffffffffb94b66e2>] kernel_restart+0x12/0x60
[  194.363146]  [<ffffffffb94b6959>] SYSC_reboot+0x229/0x260
[  194.363196]  [<ffffffffb95f200d>] ? handle_mm_fault+0x39d/0x9b0
[  194.363253]  [<ffffffffb942b621>] ? __switch_to+0x151/0x580
[  194.363304]  [<ffffffffb9b7ec28>] ? __schedule+0x448/0x9c0
[  194.363343]  [<ffffffffb94b69fe>] SyS_reboot+0xe/0x10
[  194.363387]  [<ffffffffb9b8bede>] system_call_fastpath+0x25/0x2a
[  194.363430] Code: f9 e9 37 ff ff ff 90 0f 1f 44 00 00 55 48 89 e5 41 57 41 56 41 55 4c 8d af 98 00 00 00 41 54 4c 89 ef 41 89 f4 53 e8 4c e4 55 f9 <80> b8 dc 08 00 00 01 48 89 c3 4c 8d b8 c0 08 00 00 4c 8b b0 c0
[  194.363712] RIP  [<ffffffffc03553c4>] __qede_remove+0x24/0x130 [qede]
[  194.363764]  RSP <ffff9ceabebdfac0>
[  194.363791] CR2: 00000000000008dc

Signed-off-by: Manish Chopra <manishc@marvell.com>
Signed-off-by: Ariel Elior <aelior@marvell.com>
Signed-off-by: Sudarsana Kalluru <skalluru@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

NFC: st21nfca: fix double free

[ Upstream commit 99a8efbb6e30b72ac98cecf81103f847abffb1e5 ]

The variable nfcid_skb is not changed in the callee nfc_hci_get_param()
if error occurs. Consequently, the freed variable nfcid_skb will be
freed again, resulting in a double free bug. Set nfcid_skb to NULL after
releasing it to fix the bug.

Signed-off-by: Pan Bian <bianpan2016@163.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nfc: netlink: fix double device reference drop

[ Upstream commit 025ec40b81d785a98f76b8bdb509ac10773b4f12 ]

The function nfc_put_device(dev) is called twice to drop the reference
to dev when there is no associated local llcp. Remove one of them to fix
the bug.

Fixes: 52feb444a903 ("NFC: Extend netlink interface for LTO, RW, and MIUX parameters support")
Fixes: d9b8d8e19b07 ("NFC: llcp: Service Name Lookup netlink interface")
Signed-off-by: Pan Bian <bianpan2016@163.com>
Reviewed-by: Johan Hovold <johan@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

NFC: fdp: fix incorrect free object

[ Upstream commit 517ce4e93368938b204451285e53014549804868 ]

The address of fw_vsc_cfg is on stack. Releasing it with devm_kfree() is
incorrect, which may result in a system crash or other security impacts.
The expected object to free is *fw_vsc_cfg.

Signed-off-by: Pan Bian <bianpan2016@163.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: usb: qmi_wwan: add support for DW5821e with eSIM support

[ Upstream commit e497df686e8fed8c1dd69179010656362858edb3 ]

Exactly same layout as the default DW5821e module, just a different
vid/pid.

The QMI interface is exposed in USB configuration #1:

P:  Vendor=413c ProdID=81e0 Rev=03.18
S:  Manufacturer=Dell Inc.
S:  Product=DW5821e-eSIM Snapdragon X20 LTE
S:  SerialNumber=0123456789ABCDEF
C:  #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA
I:  If#=0x0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
I:  If#=0x1 Alt= 0 #EPs= 1 Cls=03(HID  ) Sub=00 Prot=00 Driver=usbhid
I:  If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#=0x5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option

Signed-off-by: Aleksander Morgado <aleksander@aleksander.es>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: fix data-race in neigh_event_send()

[ Upstream commit 1b53d64435d56902fc234ff2507142d971a09687 ]

KCSAN reported the following data-race [1]

The fix will also prevent the compiler from optimizing out
the condition.

[1]

BUG: KCSAN: data-race in neigh_resolve_output / neigh_resolve_output

write to 0xffff8880a41dba78 of 8 bytes by interrupt on cpu 1:
 neigh_event_send include/net/neighbour.h:443 [inline]
 neigh_resolve_output+0x78/0x480 net/core/neighbour.c:1474
 neigh_output include/net/neighbour.h:511 [inline]
 ip_finish_output2+0x4af/0xe40 net/ipv4/ip_output.c:228
 __ip_finish_output net/ipv4/ip_output.c:308 [inline]
 __ip_finish_output+0x23a/0x490 net/ipv4/ip_output.c:290
 ip_finish_output+0x41/0x160 net/ipv4/ip_output.c:318
 NF_HOOK_COND include/linux/netfilter.h:294 [inline]
 ip_output+0xdf/0x210 net/ipv4/ip_output.c:432
 dst_output include/net/dst.h:436 [inline]
 ip_local_out+0x74/0x90 net/ipv4/ip_output.c:125
 __ip_queue_xmit+0x3a8/0xa40 net/ipv4/ip_output.c:532
 ip_queue_xmit+0x45/0x60 include/net/ip.h:237
 __tcp_transmit_skb+0xe81/0x1d60 net/ipv4/tcp_output.c:1169
 tcp_transmit_skb net/ipv4/tcp_output.c:1185 [inline]
 __tcp_retransmit_skb+0x4bd/0x15f0 net/ipv4/tcp_output.c:2976
 tcp_retransmit_skb+0x36/0x1a0 net/ipv4/tcp_output.c:2999
 tcp_retransmit_timer+0x719/0x16d0 net/ipv4/tcp_timer.c:515
 tcp_write_timer_handler+0x42d/0x510 net/ipv4/tcp_timer.c:598
 tcp_write_timer+0xd1/0xf0 net/ipv4/tcp_timer.c:618

read to 0xffff8880a41dba78 of 8 bytes by interrupt on cpu 0:
 neigh_event_send include/net/neighbour.h:442 [inline]
 neigh_resolve_output+0x57/0x480 net/core/neighbour.c:1474
 neigh_output include/net/neighbour.h:511 [inline]
 ip_finish_output2+0x4af/0xe40 net/ipv4/ip_output.c:228
 __ip_finish_output net/ipv4/ip_output.c:308 [inline]
 __ip_finish_output+0x23a/0x490 net/ipv4/ip_output.c:290
 ip_finish_output+0x41/0x160 net/ipv4/ip_output.c:318
 NF_HOOK_COND include/linux/netfilter.h:294 [inline]
 ip_output+0xdf/0x210 net/ipv4/ip_output.c:432
 dst_output include/net/dst.h:436 [inline]
 ip_local_out+0x74/0x90 net/ipv4/ip_output.c:125
 __ip_queue_xmit+0x3a8/0xa40 net/ipv4/ip_output.c:532
 ip_queue_xmit+0x45/0x60 include/net/ip.h:237
 __tcp_transmit_skb+0xe81/0x1d60 net/ipv4/tcp_output.c:1169
 tcp_transmit_skb net/ipv4/tcp_output.c:1185 [inline]
 __tcp_retransmit_skb+0x4bd/0x15f0 net/ipv4/tcp_output.c:2976
 tcp_retransmit_skb+0x36/0x1a0 net/ipv4/tcp_output.c:2999
 tcp_retransmit_timer+0x719/0x16d0 net/ipv4/tcp_timer.c:515
 tcp_write_timer_handler+0x42d/0x510 net/ipv4/tcp_timer.c:598

Reported by Kernel Concurrency Sanitizer on:
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.4.0-rc3+ #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011

Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipv4: Fix table id reference in fib_sync_down_addr

[ Upstream commit e0a312629fefa943534fc46f7bfbe6de3fdaf463 ]

Hendrik reported routes in the main table using source address are not
removed when the address is removed. The problem is that fib_sync_down_addr
does not account for devices in the default VRF which are associated
with the main table. Fix by updating the table id reference.

Fixes: 5a56a0b3a45d ("net: Don't delete routes in different VRFs")
Reported-by: Hendrik Donner <hd@os-cillation.de>
Signed-off-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

CDC-NCM: handle incomplete transfer of MTU

[ Upstream commit 332f989a3b0041b810836c5c3747e59aad7e9d0b ]

A malicious device may give half an answer when asked
for its MTU. The driver will proceed after this with
a garbage MTU. Anything but a complete answer must be treated
as an error.

V2: used sizeof as request by Alexander

Reported-and-tested-by: syzbot+0631d878823ce2411636@syzkaller.appspotmail.com
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 4.9.200

alarmtimer: Change remaining ENOTSUPP to EOPNOTSUPP

Fix backport of commit f18ddc13af981ce3c7b7f26925f099e7c6929aba upstream.

Update backport to change ENOTSUPP to EOPNOTSUPP in
alarm_timer_{del,set}(), which were removed in
f2c45807d3992fe0f173f34af9c347d907c31686 in v4.13-rc1.

Fixes: 65b7a5a36afb11a6769a70308c1ef3a2afae6bf4

Signed-off-by: Petr Vorel <pvorel@suse.cz>
Acked-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dmaengine: qcom: bam_dma: Fix resource leak

commit 7667819385457b4aeb5fac94f67f52ab52cc10d5 upstream.

bam_dma_terminate_all() will leak resources if any of the transactions are
committed to the hardware (present in the desc fifo), and not complete.
Since bam_dma_terminate_all() does not cause the hardware to be updated,
the hardware will still operate on any previously committed transactions.
This can cause memory corruption if the memory for the transaction has been
reassigned, and will cause a sync issue between the BAM and its client(s).

Fix this by properly updating the hardware in bam_dma_terminate_all().

Fixes: e7c0fe2a5c84 ("dmaengine: add Qualcomm BAM dma driver")
Signed-off-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20191017152606.34120-1-jeffrey.l.hugo@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/flow_dissector: switch to siphash

commit 55667441c84fa5e0911a0aac44fb059c15ba6da2 upstream.

UDP IPv6 packets auto flowlabels are using a 32bit secret
(static u32 hashrnd in net/core/flow_dissector.c) and
apply jhash() over fields known by the receivers.

Attackers can easily infer the 32bit secret and use this information
to identify a device and/or user, since this 32bit secret is only
set at boot time.

Really, using jhash() to generate cookies sent on the wire
is a serious security concern.

Trying to change the rol32(hash, 16) in ip6_make_flowlabel() would be
a dead end. Trying to periodically change the secret (like in sch_sfq.c)
could change paths taken in the network for long lived flows.

Let's switch to siphash, as we did in commit df453700e8d8
("inet: switch IP ID generator to siphash")

Using a cryptographically strong pseudo random function will solve this
privacy issue and more generally remove other weak points in the stack.

Packet schedulers using skb_get_hash_perturb() benefit from this change.

Fixes: b56774163f99 ("ipv6: Enable auto flow labels by default")
Fixes: 42240901f7c4 ("ipv6: Implement different admin modes for automatic flow labels")
Fixes: 67800f9b1f4e ("ipv6: Call skb_get_hash_flowi6 to get skb->hash in ip6_make_flowlabel")
Fixes: cb1ce2ef387b ("ipv6: Implement automatic flow label generation on transmit")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Jonathan Berger <jonathann1@walla.com>
Reported-by: Amit Klein <aksecurity@gmail.com>
Reported-by: Benny Pinkas <benny@pinkas.net>
Cc: Tom Herbert <tom@herbertland.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Mahesh Bandewar <maheshb@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

kbuild: add -fcf-protection=none when using retpoline flags

[ Upstream commit 29be86d7f9cb18df4123f309ac7857570513e8bc ]

The gcc -fcf-protection=branch option is not compatible with
-mindirect-branch=thunk-extern. The latter is used when
CONFIG_RETPOLINE is selected, and this will fail to build with
a gcc which has -fcf-protection=branch enabled by default. Adding
-fcf-protection=none when building with retpoline enabled
prevents such build failures.

Signed-off-by: Seth Forshee <seth.forshee@canonical.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

kbuild: use -fmacro-prefix-map to make __FILE__ a relative path

[ Upstream commit a73619a845d5625079cc1b3b820f44c899618388 ]

The __FILE__ macro is used everywhere in the kernel to locate the file
printing the log message, such as WARN_ON(), etc.  If the kernel is
built out of tree, this can be a long absolute path, like this:

  WARNING: CPU: 1 PID: 1 at /path/to/build/directory/arch/arm64/kernel/foo.c:...

This is because Kbuild runs in the objtree instead of the srctree,
then __FILE__ is expanded to a file path prefixed with $(srctree)/.

Commit 9da0763bdd82 ("kbuild: Use relative path when building in a
subdir of the source tree") improved this to some extent; $(srctree)
becomes ".." if the objtree is a child of the srctree.

For other cases of out-of-tree build, __FILE__ is still the absolute
path.  It also means the kernel image depends on where it was built.

A brand-new option from GCC, -fmacro-prefix-map, solves this problem.
If your compiler supports it, __FILE__ is the relative path from the
srctree regardless of O= option.  This provides more readable log and
more reproducible builds.

Please note __FILE__ is always an absolute path for external modules.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Kbuild: make designated_init attribute fatal

[ Upstream commit c834f0e8a8bb3025aac38e802fca2e686720f544 ]

If a structure is marked with __attribute__((designated_init)) from
GCC or Sparse, it needs to have all static initializers using designated
initialization. Fail the build for any missing cases. This attribute will
be used by the randstruct plugin to make sure randomized structures are
being correctly initialized.

Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

inet: stop leaking jiffies on the wire

[ Upstream commit a904a0693c189691eeee64f6c6b188bd7dc244e9 ]

Historically linux tried to stick to RFC 791, 1122, 2003
for IPv4 ID field generation.

RFC 6864 made clear that no matter how hard we try,
we can not ensure unicity of IP ID within maximum
lifetime for all datagrams with a given source
address/destination address/protocol tuple.

Linux uses a per socket inet generator (inet_id), initialized
at connection startup with a XOR of 'jiffies' and other
fields that appear clear on the wire.

Thiemo Nagel pointed that this strategy is a privacy
concern as this provides 16 bits of entropy to fingerprint
devices.

Let's switch to a random starting point, this is just as
good as far as RFC 6864 is concerned and does not leak
anything critical.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Thiemo Nagel <tnagel@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/mlx4_core: Dynamically set guaranteed amount of counters per VF

[ Upstream commit e19868efea0c103f23b4b7e986fd0a703822111f ]

Prior to this patch, the amount of counters guaranteed per VF in the
resource tracker was MLX4_VF_COUNTERS_PER_PORT * MLX4_MAX_PORTS. It was
set regardless if the VF was single or dual port.
This caused several VFs to have no guaranteed counters although the
system could satisfy their request.

The fix is to dynamically guarantee counters, based on each VF
specification.

Fixes: 9de92c60beaa ("net/mlx4_core: Adjust counter grant policy in the resource tracker")
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

vxlan: check tun_info options_len properly

[ Upstream commit eadf52cf1852196a1363044dcda22fa5d7f296f7 ]

This patch is to improve the tun_info options_len by dropping
the skb when TUNNEL_VXLAN_OPT is set but options_len is less
than vxlan_metadata. This can void a potential out-of-bounds
access on ip_tun_info.

Fixes: ee122c79d422 ("vxlan: Flow based tunneling")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: bcmgenet: reset 40nm EPHY on energy detect

[ Upstream commit 25382b991d252aed961cd434176240f9de6bb15f ]

The EPHY integrated into the 40nm Set-Top Box devices can falsely
detect energy when connected to a disabled peer interface. When the
peer interface is enabled the EPHY will detect and report the link
as active, but on occasion may get into a state where it is not
able to exchange data with the connected GENET MAC. This issue has
not been observed when the link parameters are auto-negotiated;
however, it has been observed with a manually configured link.

It has been empirically determined that issuing a soft reset to the
EPHY when energy is detected prevents it from getting into this bad
state.

Fixes: 1c1008c793fa ("net: bcmgenet: add main driver file")
Signed-off-by: Doug Berger <opendmb@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: dsa: fix switch tree list

[ Upstream commit 50c7d2ba9de20f60a2d527ad6928209ef67e4cdd ]

If there are multiple switch trees on the device, only the last one
will be listed, because the arguments of list_add_tail are swapped.

Fixes: 83c0afaec7b7 ("net: dsa: Add new binding implementation")
Signed-off-by: Vivien Didelot <vivien.didelot@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: add READ_ONCE() annotation in __skb_wait_for_more_packets()

[ Upstream commit 7c422d0ce97552dde4a97e6290de70ec6efb0fc6 ]

__skb_wait_for_more_packets() can be called while other cpus
can feed packets to the socket receive queue.

KCSAN reported :

BUG: KCSAN: data-race in __skb_wait_for_more_packets / __udp_enqueue_schedule_skb

write to 0xffff888102e40b58 of 8 bytes by interrupt on cpu 0:
 __skb_insert include/linux/skbuff.h:1852 [inline]
 __skb_queue_before include/linux/skbuff.h:1958 [inline]
 __skb_queue_tail include/linux/skbuff.h:1991 [inline]
 __udp_enqueue_schedule_skb+0x2d7/0x410 net/ipv4/udp.c:1470
 __udp_queue_rcv_skb net/ipv4/udp.c:1940 [inline]
 udp_queue_rcv_one_skb+0x7bd/0xc70 net/ipv4/udp.c:2057
 udp_queue_rcv_skb+0xb5/0x400 net/ipv4/udp.c:2074
 udp_unicast_rcv_skb.isra.0+0x7e/0x1c0 net/ipv4/udp.c:2233
 __udp4_lib_rcv+0xa44/0x17c0 net/ipv4/udp.c:2300
 udp_rcv+0x2b/0x40 net/ipv4/udp.c:2470
 ip_protocol_deliver_rcu+0x4d/0x420 net/ipv4/ip_input.c:204
 ip_local_deliver_finish+0x110/0x140 net/ipv4/ip_input.c:231
 NF_HOOK include/linux/netfilter.h:305 [inline]
 NF_HOOK include/linux/netfilter.h:299 [inline]
 ip_local_deliver+0x133/0x210 net/ipv4/ip_input.c:252
 dst_input include/net/dst.h:442 [inline]
 ip_rcv_finish+0x121/0x160 net/ipv4/ip_input.c:413
 NF_HOOK include/linux/netfilter.h:305 [inline]
 NF_HOOK include/linux/netfilter.h:299 [inline]
 ip_rcv+0x18f/0x1a0 net/ipv4/ip_input.c:523
 __netif_receive_skb_one_core+0xa7/0xe0 net/core/dev.c:5010
 __netif_receive_skb+0x37/0xf0 net/core/dev.c:5124
 process_backlog+0x1d3/0x420 net/core/dev.c:5955

read to 0xffff888102e40b58 of 8 bytes by task 13035 on cpu 1:
 __skb_wait_for_more_packets+0xfa/0x320 net/core/datagram.c:100
 __skb_recv_udp+0x374/0x500 net/ipv4/udp.c:1683
 udp_recvmsg+0xe1/0xb10 net/ipv4/udp.c:1712
 inet_recvmsg+0xbb/0x250 net/ipv4/af_inet.c:838
 sock_recvmsg_nosec+0x5c/0x70 net/socket.c:871
 ___sys_recvmsg+0x1a0/0x3e0 net/socket.c:2480
 do_recvmmsg+0x19a/0x5c0 net/socket.c:2601
 __sys_recvmmsg+0x1ef/0x200 net/socket.c:2680
 __do_sys_recvmmsg net/socket.c:2703 [inline]
 __se_sys_recvmmsg net/socket.c:2696 [inline]
 __x64_sys_recvmmsg+0x89/0xb0 net/socket.c:2696
 do_syscall_64+0xcc/0x370 arch/x86/entry/common.c:290
 entry_SYSCALL_64_after_hwframe+0x44/0xa9

Reported by Kernel Concurrency Sanitizer on:
CPU: 1 PID: 13035 Comm: syz-executor.3 Not tainted 5.4.0-rc3+ #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011

Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

selftests: net: reuseport_dualstack: fix uninitalized parameter

[ Upstream commit d64479a3e3f9924074ca7b50bd72fa5211dca9c1 ]

This test reports EINVAL for getsockopt(SOL_SOCKET, SO_DOMAIN)
occasionally due to the uninitialized length parameter.
Initialize it to fix this, and also use int for "test_family" to comply
with the API standard.

Fixes: d6a61f80b871 ("soreuseport: test mixed v4/v6 sockets")
Reported-by: Maciej Żenczykowski <maze@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Wei Wang <weiwan@google.com>
Cc: Craig Gallek <cgallek@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: Zeroing the structure ethtool_wolinfo in ethtool_get_wol()

[ Upstream commit 5ff223e86f5addbfae26419cbb5d61d98f6fbf7d ]

memset() the structure ethtool_wolinfo that has padded bytes
but the padded bytes have not been zeroed out.

Signed-off-by: zhanglin <zhang.lin16@zte.com.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: hisilicon: Fix ping latency when deal with high throughput

[ Upstream commit e56bd641ca61beb92b135298d5046905f920b734 ]

This is due to error in over budget processing.
When dealing with high throughput, the used buffers
that exceeds the budget is not cleaned up. In addition,
it takes a lot of cycles to clean up the used buffer,
and then the buffer where the valid data is located can take effect.

Signed-off-by: Jiangfeng Xiao <xiaojiangfeng@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: fix sk_page_frag() recursion from memory reclaim

[ Upstream commit 20eb4f29b60286e0d6dc01d9c260b4bd383c58fb ]

sk_page_frag() optimizes skb_frag allocations by using per-task
skb_frag cache when it knows it's the only user.  The condition is
determined by seeing whether the socket allocation mask allows
blocking - if the allocation may block, it obviously owns the task's
context and ergo exclusively owns current->task_frag.

Unfortunately, this misses recursion through memory reclaim path.
Please take a look at the following backtrace.

 [2] RIP: 0010:tcp_sendmsg_locked+0xccf/0xe10
     ...
     tcp_sendmsg+0x27/0x40
     sock_sendmsg+0x30/0x40
     sock_xmit.isra.24+0xa1/0x170 [nbd]
     nbd_send_cmd+0x1d2/0x690 [nbd]
     nbd_queue_rq+0x1b5/0x3b0 [nbd]
     __blk_mq_try_issue_directly+0x108/0x1b0
     blk_mq_request_issue_directly+0xbd/0xe0
     blk_mq_try_issue_list_directly+0x41/0xb0
     blk_mq_sched_insert_requests+0xa2/0xe0
     blk_mq_flush_plug_list+0x205/0x2a0
     blk_flush_plug_list+0xc3/0xf0
 [1] blk_finish_plug+0x21/0x2e
     _xfs_buf_ioapply+0x313/0x460
     __xfs_buf_submit+0x67/0x220
     xfs_buf_read_map+0x113/0x1a0
     xfs_trans_read_buf_map+0xbf/0x330
     xfs_btree_read_buf_block.constprop.42+0x95/0xd0
     xfs_btree_lookup_get_block+0x95/0x170
     xfs_btree_lookup+0xcc/0x470
     xfs_bmap_del_extent_real+0x254/0x9a0
     __xfs_bunmapi+0x45c/0xab0
     xfs_bunmapi+0x15/0x30
     xfs_itruncate_extents_flags+0xca/0x250
     xfs_free_eofblocks+0x181/0x1e0
     xfs_fs_destroy_inode+0xa8/0x1b0
     destroy_inode+0x38/0x70
     dispose_list+0x35/0x50
     prune_icache_sb+0x52/0x70
     super_cache_scan+0x120/0x1a0
     do_shrink_slab+0x120/0x290
     shrink_slab+0x216/0x2b0
     shrink_node+0x1b6/0x4a0
     do_try_to_free_pages+0xc6/0x370
     try_to_free_mem_cgroup_pages+0xe3/0x1e0
     try_charge+0x29e/0x790
     mem_cgroup_charge_skmem+0x6a/0x100
     __sk_mem_raise_allocated+0x18e/0x390
     __sk_mem_schedule+0x2a/0x40
 [0] tcp_sendmsg_locked+0x8eb/0xe10
     tcp_sendmsg+0x27/0x40
     sock_sendmsg+0x30/0x40
     ___sys_sendmsg+0x26d/0x2b0
     __sys_sendmsg+0x57/0xa0
     do_syscall_64+0x42/0x100
     entry_SYSCALL_64_after_hwframe+0x44/0xa9

In [0], tcp_send_msg_locked() was using current->page_frag when it
called sk_wmem_schedule().  It already calculated how many bytes can
be fit into current->page_frag.  Due to memory pressure,
sk_wmem_schedule() called into memory reclaim path which called into
xfs and then IO issue path.  Because the filesystem in question is
backed by nbd, the control goes back into the tcp layer - back into
tcp_sendmsg_locked().

nbd sets sk_allocation to (GFP_NOIO | __GFP_MEMALLOC) which makes
sense - it's in the process of freeing memory and wants to be able to,
e.g., drop clean pages to make forward progress.  However, this
confused sk_page_frag() called from [2].  Because it only tests
whether the allocation allows blocking which it does, it now thinks
current->page_frag can be used again although it already was being
used in [0].

After [2] used current->page_frag, the offset would be increased by
the used amount.  When the control returns to [0],
current->page_frag's offset is increased and the previously calculated
number of bytes now may overrun the end of allocated memory leading to
silent memory corruptions.

Fix it by adding gfpflags_normal_context() which tests sleepable &&
!reclaim and use it to determine whether to use current->task_frag.

v2: Eric didn't like gfp flags being tested twice.  Introduce a new
    helper gfpflags_normal_context() and combine the two tests.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dccp: do not leak jiffies on the wire

[ Upstream commit 3d1e5039f5f87a8731202ceca08764ee7cb010d3 ]

For some reason I missed the case of DCCP passive
flows in my previous patch.

Fixes: a904a0693c18 ("inet: stop leaking jiffies on the wire")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Thiemo Nagel <tnagel@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cifs: Fix cifsInodeInfo lock_sem deadlock when reconnect occurs

[ Upstream commit d46b0da7a33dd8c99d969834f682267a45444ab3 ]

There's a deadlock that is possible and can easily be seen with
a test where multiple readers open/read/close of the same file
and a disruption occurs causing reconnect.  The deadlock is due
a reader thread inside cifs_strict_readv calling down_read and
obtaining lock_sem, and then after reconnect inside
cifs_reopen_file calling down_read a second time.  If in
between the two down_read calls, a down_write comes from
another process, deadlock occurs.

        CPU0                    CPU1
        ----                    ----
cifs_strict_readv()
 down_read(&cifsi->lock_sem);
                               _cifsFileInfo_put
                                  OR
                               cifs_new_fileinfo
                                down_write(&cifsi->lock_sem);
cifs_reopen_file()
 down_read(&cifsi->lock_sem);

Fix the above by changing all down_write(lock_sem) calls to
down_write_trylock(lock_sem)/msleep() loop, which in turn
makes the second down_read call benign since it will never
block behind the writer while holding lock_sem.

Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
Suggested-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed--by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

MIPS: bmips: mark exception vectors as char arrays

[ Upstream commit e4f5cb1a9b27c0f94ef4f5a0178a3fde2d3d0e9e ]

The vectors span more than one byte, so mark them as arrays.

Fixes the following build error when building when using GCC 8.3:

In file included from ./include/linux/string.h:19,
                 from ./include/linux/bitmap.h:9,
                 from ./include/linux/cpumask.h:12,
                 from ./arch/mips/include/asm/processor.h:15,
                 from ./arch/mips/include/asm/thread_info.h:16,
                 from ./include/linux/thread_info.h:38,
                 from ./include/asm-generic/preempt.h:5,
                 from ./arch/mips/include/generated/asm/preempt.h:1,
                 from ./include/linux/preempt.h:81,
                 from ./include/linux/spinlock.h:51,
                 from ./include/linux/mmzone.h:8,
                 from ./include/linux/bootmem.h:8,
                 from arch/mips/bcm63xx/prom.c:10:
arch/mips/bcm63xx/prom.c: In function 'prom_init':
./arch/mips/include/asm/string.h:162:11: error: '__builtin_memcpy' forming offset [2, 32] is out of the bounds [0, 1] of object 'bmips_smp_movevec' with type 'char' [-Werror=array-bounds]
   __ret = __builtin_memcpy((dst), (src), __len); \
           ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
arch/mips/bcm63xx/prom.c:97:3: note: in expansion of macro 'memcpy'
   memcpy((void *)0xa0000200, &bmips_smp_movevec, 0x20);
   ^~~~~~
In file included from arch/mips/bcm63xx/prom.c:14:
./arch/mips/include/asm/bmips.h:80:13: note: 'bmips_smp_movevec' declared here
 extern char bmips_smp_movevec;

Fixes: 18a1eef92dcd ("MIPS: BMIPS: Introduce bmips.h")
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Paul Burton <paulburton@kernel.org>
Cc: linux-mips@vger.kernel.org
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

of: unittest: fix memory leak in unittest_data_add

[ Upstream commit e13de8fe0d6a51341671bbe384826d527afe8d44 ]

In unittest_data_add, a copy buffer is created via kmemdup. This buffer
is leaked if of_fdt_unflatten_tree fails. The release for the
unittest_data buffer is added.

Fixes: b951f9dc7f25 ("Enabling OF selftest to run without machine's devicetree")
Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Reviewed-by: Frank Rowand <frowand.list@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: target: core: Do not overwrite CDB byte 1

[ Upstream commit 27e84243cb63601a10e366afe3e2d05bb03c1cb5 ]

passthrough_parse_cdb() - used by TCMU and PSCSI - attepts to reset the LUN
field of SCSI-2 CDBs (bits 5,6,7 of byte 1).  The current code is wrong as
for newer commands not having the LUN field it overwrites relevant command
bits (e.g. for SECURITY PROTOCOL IN / OUT). We think this code was
unnecessary from the beginning or at least it is no longer useful. So we
remove it entirely.

Link: https://lore.kernel.org/r/12498eab-76fd-eaad-1316-c2827badb76a@ts.fujitsu.com
Signed-off-by: Bodo Stroesser <bstroesser@ts.fujitsu.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: davinci: dm365: Fix McBSP dma_slave_map entry

[ Upstream commit 564b6bb9d42d31fc80c006658cf38940a9b99616 ]

dm365 have only single McBSP, so the device name is without .0

Fixes: 0c750e1fe481d ("ARM: davinci: dm365: Add dma_slave_map to edma")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf kmem: Fix memory leak in compact_gfp_flags()

[ Upstream commit 1abecfcaa7bba21c9985e0136fa49836164dd8fd ]

The memory @orig_flags is allocated by strdup(), it is freed on the
normal path, but leak to free on the error path.

Fix this by adding free(orig_flags) on the error path.

Fixes: 0e11115644b3 ("perf kmem: Print gfp flags in human readable string")
Signed-off-by: Yunfeng Ye <yeyunfeng@huawei.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Feilong Lin <linfeilong@huawei.com>
Cc: Hu Shiyuan <hushiyuan@huawei.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/f9e9f458-96f3-4a97-a1d5-9feec2420e07@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: imx7s: Correct GPT's ipg clock source

[ Upstream commit 252b9e21bcf46b0d16f733f2e42b21fdc60addee ]

i.MX7S/D's GPT ipg clock should be from GPT clock root and
controlled by CCM's GPT CCGR, using correct clock source for
GPT ipg clock instead of IMX7D_CLK_DUMMY.

Fixes: 3ef79ca6bd1d ("ARM: dts: imx7d: use imx7s.dtsi as base device tree")
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: fix kconfig dependency warning related to 53C700_LE_ON_BE

[ Upstream commit 8cbf0c173aa096dda526d1ccd66fc751c31da346 ]

When building a kernel with SCSI_SNI_53C710 enabled, Kconfig warns:

WARNING: unmet direct dependencies detected for 53C700_LE_ON_BE
  Depends on [n]: SCSI_LOWLEVEL [=y] && SCSI [=y] && SCSI_LASI700 [=n]
  Selected by [y]:
  - SCSI_SNI_53C710 [=y] && SCSI_LOWLEVEL [=y] && SNI_RM [=y] && SCSI [=y]

Add the missing depends SCSI_SNI_53C710 to 53C700_LE_ON_BE to fix it.

Link: https://lore.kernel.org/r/20191009151128.32411-1-tbogendoerfer@suse.de
Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: sni_53c710: fix compilation error

[ Upstream commit 0ee6211408a8e939428f662833c7301394125b80 ]

Drop out memory dev_printk() with wrong device pointer argument.

[mkp: typo]

Link: https://lore.kernel.org/r/20191009151118.32350-1-tbogendoerfer@suse.de
Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: scsi_dh_alua: handle RTPG sense code correctly during state transitions

[ Upstream commit b6ce6fb121a655aefe41dccc077141c102145a37 ]

Some arrays are not capable of returning RTPG data during state
transitioning, but rather return an 'LUN not accessible, asymmetric access
state transition' sense code. In these cases we can set the state to
'transitioning' directly and don't need to evaluate the RTPG data (which we
won't have anyway).

Link: https://lore.kernel.org/r/20191007135701.32389-1-hare@suse.de
Reviewed-by: Laurence Oberman <loberman@redhat.com>
Reviewed-by: Ewan D. Milne <emilne@redhat.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: mm: fix alignment handler faults under memory pressure

[ Upstream commit 67e15fa5b487adb9b78a92789eeff2d6ec8f5cee ]

When the system has high memory pressure, the page containing the
instruction may be paged out.  Using probe_kernel_address() means that
if the page is swapped out, the resulting page fault will not be
handled because page faults are disabled by this function.

Use get_user() to read the instruction instead.

Reported-by: Jing Xiangfeng <jingxiangfeng@huawei.com>
Fixes: b255188f90e2 ("ARM: fix scheduling while atomic warning in alignment handling code")
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pinctrl: ns2: Fix off by one bugs in ns2_pinmux_enable()

[ Upstream commit 39b65fbb813089e366b376bd8acc300b6fd646dc ]

The pinctrl->functions[] array has pinctrl->num_functions elements and
the pinctrl->groups[] array is the same way.  These are set in
ns2_pinmux_probe().  So the > comparisons should be >= so that we don't
read one element beyond the end of the array.

Fixes: b5aa1006e4a9 ("pinctrl: ns2: add pinmux driver support for Broadcom NS2 SoC")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20190926081426.GB2332@mwanda
Acked-by: Scott Branden <scott.branden@broadcom.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: logicpd-torpedo-som: Remove twl_keypad

[ Upstream commit 6b512b0ee091edcb8e46218894e4c917d919d3dc ]

The TWL4030 used on the Logit PD Torpedo SOM does not have the
keypad pins routed.  This patch disables the twl_keypad driver
to remove some splat during boot:

twl4030_keypad 48070000.i2c:twl@48:keypad: missing or malformed property linux,keymap: -22
twl4030_keypad 48070000.i2c:twl@48:keypad: Failed to build keymap
twl4030_keypad: probe of 48070000.i2c:twl@48:keypad failed with error -22

Signed-off-by: Adam Ford <aford173@gmail.com>
[tony@atomide.com: removed error time stamps]
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoc: rockchip: i2s: Fix RPM imbalance

[ Upstream commit b1e620e7d32f5aad5353cc3cfc13ed99fea65d3a ]

If rockchip_pcm_platform_register() fails, e.g. upon deferring to wait
for an absent DMA channel, we return without disabling RPM, which makes
subsequent re-probe attempts scream with errors about the unbalanced
enable. Don't do that.

Fixes: ebb75c0bdba2 ("ASoC: rockchip: i2s: Adjust devm usage")
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/bcb12a849a05437fb18372bc7536c649b94bdf07.1570029862.git.robin.murphy@arm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: wm_adsp: Don't generate kcontrols without READ flags

[ Upstream commit 3ae7359c0e39f42a96284d6798fc669acff38140 ]

User space always expects to be able to read ALSA controls, so ensure
no kcontrols are generated without an appropriate READ flag. In the case
of a read of such a control zeros will be returned.

Signed-off-by: Stuart Henderson <stuarth@opensource.cirrus.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20191002084240.21589-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

regulator: pfuze100-regulator: Variable "val" in pfuze100_regulator_probe() could be uninitialized

[ Upstream commit 1252b283141f03c3dffd139292c862cae10e174d ]

In function pfuze100_regulator_probe(), variable "val" could be
initialized if regmap_read() fails. However, "val" is used to
decide the control flow later in the if statement, which is
potentially unsafe.

Signed-off-by: Yizhuo <yzhai003@ucr.edu>
Link: https://lore.kernel.org/r/20190929170957.14775-1-yzhai003@ucr.edu
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

regulator: ti-abb: Fix timeout in ti_abb_wait_txdone/ti_abb_clear_all_txdone

[ Upstream commit f64db548799e0330897c3203680c2ee795ade518 ]

ti_abb_wait_txdone() may return -ETIMEDOUT when ti_abb_check_txdone()
returns true in the latest iteration of the while loop because the timeout
value is abb->settling_time + 1. Similarly, ti_abb_clear_all_txdone() may
return -ETIMEDOUT when ti_abb_check_txdone() returns false in the latest
iteration of the while loop. Fix it.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Acked-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20190929095848.21960-1-axel.lin@ingics.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Linux 4.9.199

Revert "ALSA: hda: Flush interrupts on disabling"

[ Upstream commit 1a7f60b9df614bb36d14dc0c0bc898a31b2b506f ]

This reverts commit caa8422d01e983782548648e125fd617cadcec3f.

It turned out that this commit caused a regression at shutdown /
reboot, as the synchronize_irq() calls seems blocking the whole
shutdown.  Also another part of the change about shuffling the call
order looks suspicious; the azx_stop_chip() call disables the CORB /
RIRB while the others may still need the CORB/RIRB update.

Since the original commit itself was a cargo-fix, let's revert the
whole patch.

Fixes: caa8422d01e9 ("ALSA: hda: Flush interrupts on disabling")
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=205333
BugLinK: https://bugs.freedesktop.org/show_bug.cgi?id=111174
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://lore.kernel.org/r/20191028081056.22010-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ALSA: timer: Fix mutex deadlock at releasing card

[ Upstream commit a39331867335d4a94b6165e306265c9e24aca073 ]

When a card is disconnected while in use, the system waits until all
opened files are closed then releases the card.  This is done via
put_device() of the card device in each device release code.

The recently reported mutex deadlock bug happens in this code path;
snd_timer_close() for the timer device deals with the global
register_mutex and it calls put_device() there.  When this timer
device is the last one, the card gets freed and it eventually calls
snd_timer_free(), which has again the protection with the global
register_mutex -- boom.

Basically put_device() call itself is race-free, so a relative simple
workaround is to move this put_device() call out of the mutex.  For
achieving that, in this patch, snd_timer_close_locked() got a new
argument to store the card device pointer in return, and each caller
invokes put_device() with the returned object after the mutex unlock.

Reported-and-tested-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ALSA: timer: Simplify error path in snd_timer_open()

[ Upstream commit 41672c0c24a62699d20aab53b98d843b16483053 ]

Just a minor refactoring to use the standard goto for error paths in
snd_timer_open() instead of open code.  The first mutex_lock() is
moved to the beginning of the function to make the code clearer.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ALSA: timer: Limit max instances per timer

[ Upstream commit 9b7d869ee5a77ed4a462372bb89af622e705bfb8 ]

Currently we allow unlimited number of timer instances, and it may
bring the system hogging way too much CPU when too many timer
instances are opened and processed concurrently.  This may end up with
a soft-lockup report as triggered by syzkaller, especially when
hrtimer backend is deployed.

Since such insane number of instances aren't demanded by the normal
use case of ALSA sequencer and it merely  opens a risk only for abuse,
this patch introduces the upper limit for the number of instances per
timer backend.  As default, it's set to 1000, but for the fine-grained
timer like hrtimer, it's set to 100.

Reported-by: syzbot
Tested-by: Jérôme Glisse <jglisse@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ALSA: timer: Follow standard EXPORT_SYMBOL() declarations

[ Upstream commit 988563929d5b65c021439880ac6bd1b207722f26 ]

Just a tidy up to follow the standard EXPORT_SYMBOL*() declarations
in order to improve grep-ability.

- Move EXPORT_SYMBOL*() to the position right after its definition

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

xfs: Correctly invert xfs_buftarg LRU isolation logic

commit 19957a181608d25c8f4136652d0ea00b3738972d upstream.

Due to an inverted logic mistake in xfs_buftarg_isolate()
the xfs_buffers with zero b_lru_ref will take another trip
around LRU, while isolating buffers with non-zero b_lru_ref.

Additionally those isolated buffers end up right back on the LRU
once they are released, because b_lru_ref remains elevated.

Fix that circuitous route by leaving them on the LRU
as originally intended.

Signed-off-by: Vratislav Bendel <vbendel@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Alex Lyakas <alex@zadara.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sctp: not bind the socket in sctp_connect

commit 9b6c08878e23adb7cc84bdca94d8a944b03f099e upstream.

Now when sctp_connect() is called with a wrong sa_family, it binds
to a port but doesn't set bp->port, then sctp_get_af_specific will
return NULL and sctp_connect() returns -EINVAL.

Then if sctp_bind() is called to bind to another port, the last
port it has bound will leak due to bp->port is NULL by then.

sctp_connect() doesn't need to bind ports, as later __sctp_connect
will do it if bp->port is NULL. So remove it from sctp_connect().
While at it, remove the unnecessary sockaddr.sa_family len check
as it's already done in sctp_inet_connect.

Fixes: 644fbdeacf1d ("sctp: fix the issue that flags are ignored when using kernel_connect")
Reported-by: syzbot+079bf326b38072f849d9@syzkaller.appspotmail.com
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sctp: fix the issue that flags are ignored when using kernel_connect

commit 644fbdeacf1d3edd366e44b8ba214de9d1dd66a9 upstream.

Now sctp uses inet_dgram_connect as its proto_ops .connect, and the flags
param can't be passed into its proto .connect where this flags is really
needed.

sctp works around it by getting flags from socket file in __sctp_connect.
It works for connecting from userspace, as inherently the user sock has
socket file and it passes f_flags as the flags param into the proto_ops
.connect.

However, the sock created by sock_create_kern doesn't have a socket file,
and it passes the flags (like O_NONBLOCK) by using the flags param in
kernel_connect, which calls proto_ops .connect later.

So to fix it, this patch defines a new proto_ops .connect for sctp,
sctp_inet_connect, which calls __sctp_connect() directly with this
flags param. After this, the sctp's proto .connect can be removed.

Note that sctp_inet_connect doesn't need to do some checks that are not
needed for sctp, which makes thing better than with inet_dgram_connect.

Suggested-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Reviewed-by: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sch_netem: fix rcu splat in netem_enqueue()

commit 159d2c7d8106177bd9a986fd005a311fe0d11285 upstream.

qdisc_root() use from netem_enqueue() triggers a lockdep warning.

__dev_queue_xmit() uses rcu_read_lock_bh() which is
not equivalent to rcu_read_lock() + local_bh_disable_bh as far
as lockdep is concerned.

WARNING: suspicious RCU usage
5.3.0-rc7+ #0 Not tainted
-----------------------------
include/net/sch_generic.h:492 suspicious rcu_dereference_check() usage!

other info that might help us debug this:

rcu_scheduler_active = 2, debug_locks = 1
3 locks held by syz-executor427/8855:
 #0: 00000000b5525c01 (rcu_read_lock_bh){....}, at: lwtunnel_xmit_redirect include/net/lwtunnel.h:92 [inline]
 #0: 00000000b5525c01 (rcu_read_lock_bh){....}, at: ip_finish_output2+0x2dc/0x2570 net/ipv4/ip_output.c:214
 #1: 00000000b5525c01 (rcu_read_lock_bh){....}, at: __dev_queue_xmit+0x20a/0x3650 net/core/dev.c:3804
 #2: 00000000364bae92 (&(&sch->q.lock)->rlock){+.-.}, at: spin_lock include/linux/spinlock.h:338 [inline]
 #2: 00000000364bae92 (&(&sch->q.lock)->rlock){+.-.}, at: __dev_xmit_skb net/core/dev.c:3502 [inline]
 #2: 00000000364bae92 (&(&sch->q.lock)->rlock){+.-.}, at: __dev_queue_xmit+0x14b8/0x3650 net/core/dev.c:3838

stack backtrace:
CPU: 0 PID: 8855 Comm: syz-executor427 Not tainted 5.3.0-rc7+ #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x172/0x1f0 lib/dump_stack.c:113
 lockdep_rcu_suspicious+0x153/0x15d kernel/locking/lockdep.c:5357
 qdisc_root include/net/sch_generic.h:492 [inline]
 netem_enqueue+0x1cfb/0x2d80 net/sched/sch_netem.c:479
 __dev_xmit_skb net/core/dev.c:3527 [inline]
 __dev_queue_xmit+0x15d2/0x3650 net/core/dev.c:3838
 dev_queue_xmit+0x18/0x20 net/core/dev.c:3902
 neigh_hh_output include/net/neighbour.h:500 [inline]
 neigh_output include/net/neighbour.h:509 [inline]
 ip_finish_output2+0x1726/0x2570 net/ipv4/ip_output.c:228
 __ip_finish_output net/ipv4/ip_output.c:308 [inline]
 __ip_finish_output+0x5fc/0xb90 net/ipv4/ip_output.c:290
 ip_finish_output+0x38/0x1f0 net/ipv4/ip_output.c:318
 NF_HOOK_COND include/linux/netfilter.h:294 [inline]
 ip_mc_output+0x292/0xf40 net/ipv4/ip_output.c:417
 dst_output include/net/dst.h:436 [inline]
 ip_local_out+0xbb/0x190 net/ipv4/ip_output.c:125
 ip_send_skb+0x42/0xf0 net/ipv4/ip_output.c:1555
 udp_send_skb.isra.0+0x6b2/0x1160 net/ipv4/udp.c:887
 udp_sendmsg+0x1e96/0x2820 net/ipv4/udp.c:1174
 inet_sendmsg+0x9e/0xe0 net/ipv4/af_inet.c:807
 sock_sendmsg_nosec net/socket.c:637 [inline]
 sock_sendmsg+0xd7/0x130 net/socket.c:657
 ___sys_sendmsg+0x3e2/0x920 net/socket.c:2311
 __sys_sendmmsg+0x1bf/0x4d0 net/socket.c:2413
 __do_sys_sendmmsg net/socket.c:2442 [inline]
 __se_sys_sendmmsg net/socket.c:2439 [inline]
 __x64_sys_sendmmsg+0x9d/0x100 net/socket.c:2439
 do_syscall_64+0xfd/0x6a0 arch/x86/entry/common.c:296
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: usb: sr9800: fix uninitialized local variable

commit 77b6d09f4ae66d42cd63b121af67780ae3d1a5e9 upstream.

Make sure res does not contain random value if the call to
sr_read_cmd fails for some reason.

Reported-by: syzbot+f1842130bbcfb335bac1@syzkaller.appspotmail.com
Signed-off-by: Valentin Vidic <vvidic@valentin-vidic.from.hr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bonding: fix potential NULL deref in bond_update_slave_arr

commit a7137534b597b7c303203e6bc3ed87e87a273bb8 upstream.

syzbot got a NULL dereference in bond_update_slave_arr() [1],
happening after a failure to allocate bond->slave_arr

A workqueue (bond_slave_arr_handler) is supposed to retry
the allocation later, but if the slave is removed before
the workqueue had a chance to complete, bond->slave_arr
can still be NULL.

[1]

Failed to build slave-array.
kasan: CONFIG_KASAN_INLINE enabled
kasan: GPF could be caused by NULL-ptr deref or user memory access
general protection fault: 0000 [#1] SMP KASAN PTI
Modules linked in:
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:bond_update_slave_arr.cold+0xc6/0x198 drivers/net/bonding/bond_main.c:4039
RSP: 0018:ffff88018fe33678 EFLAGS: 00010246
RAX: dffffc0000000000 RBX: 0000000000000000 RCX: ffffc9000290b000
RDX: 0000000000000000 RSI: ffffffff82b63037 RDI: ffff88019745ea20
RBP: ffff88018fe33760 R08: ffff880170754280 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000
R13: ffff88019745ea00 R14: 0000000000000000 R15: ffff88018fe338b0
FS:  00007febd837d700(0000) GS:ffff8801dad00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000004540a0 CR3: 00000001c242e005 CR4: 00000000001626f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 [<ffffffff82b5b45e>] __bond_release_one+0x43e/0x500 drivers/net/bonding/bond_main.c:1923
 [<ffffffff82b5b966>] bond_release drivers/net/bonding/bond_main.c:2039 [inline]
 [<ffffffff82b5b966>] bond_do_ioctl+0x416/0x870 drivers/net/bonding/bond_main.c:3562
 [<ffffffff83ae25f4>] dev_ifsioc+0x6f4/0x940 net/core/dev_ioctl.c:328
 [<ffffffff83ae2e58>] dev_ioctl+0x1b8/0xc70 net/core/dev_ioctl.c:495
 [<ffffffff83995ffd>] sock_do_ioctl+0x1bd/0x300 net/socket.c:1088
 [<ffffffff83996a80>] sock_ioctl+0x300/0x5d0 net/socket.c:1196
 [<ffffffff81b124db>] vfs_ioctl fs/ioctl.c:47 [inline]
 [<ffffffff81b124db>] file_ioctl fs/ioctl.c:501 [inline]
 [<ffffffff81b124db>] do_vfs_ioctl+0xacb/0x1300 fs/ioctl.c:688
 [<ffffffff81b12dc6>] SYSC_ioctl fs/ioctl.c:705 [inline]
 [<ffffffff81b12dc6>] SyS_ioctl+0xb6/0xe0 fs/ioctl.c:696
 [<ffffffff8101ccc8>] do_syscall_64+0x528/0x770 arch/x86/entry/common.c:305
 [<ffffffff84400091>] entry_SYSCALL_64_after_hwframe+0x42/0xb7

Fixes: ee6377147409 ("bonding: Simplify the xmit function for modes that use xmit_hash")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Cc: Mahesh Bandewar <maheshb@google.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

llc: fix sk_buff leak in llc_conn_service()

commit b74555de21acd791f12c4a1aeaf653dd7ac21133 upstream.

syzbot reported:

    BUG: memory leak
    unreferenced object 0xffff88811eb3de00 (size 224):
       comm "syz-executor559", pid 7315, jiffies 4294943019 (age 10.300s)
       hex dump (first 32 bytes):
         00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
         00 a0 38 24 81 88 ff ff 00 c0 f2 15 81 88 ff ff  ..8$............
       backtrace:
         [<000000008d1c66a1>] kmemleak_alloc_recursive  include/linux/kmemleak.h:55 [inline]
         [<000000008d1c66a1>] slab_post_alloc_hook mm/slab.h:439 [inline]
         [<000000008d1c66a1>] slab_alloc_node mm/slab.c:3269 [inline]
         [<000000008d1c66a1>] kmem_cache_alloc_node+0x153/0x2a0 mm/slab.c:3579
         [<00000000447d9496>] __alloc_skb+0x6e/0x210 net/core/skbuff.c:198
         [<000000000cdbf82f>] alloc_skb include/linux/skbuff.h:1058 [inline]
         [<000000000cdbf82f>] llc_alloc_frame+0x66/0x110 net/llc/llc_sap.c:54
         [<000000002418b52e>] llc_conn_ac_send_sabme_cmd_p_set_x+0x2f/0x140  net/llc/llc_c_ac.c:777
         [<000000001372ae17>] llc_exec_conn_trans_actions net/llc/llc_conn.c:475  [inline]
         [<000000001372ae17>] llc_conn_service net/llc/llc_conn.c:400 [inline]
         [<000000001372ae17>] llc_conn_state_process+0x1ac/0x640  net/llc/llc_conn.c:75
         [<00000000f27e53c1>] llc_establish_connection+0x110/0x170  net/llc/llc_if.c:109
         [<00000000291b2ca0>] llc_ui_connect+0x10e/0x370 net/llc/af_llc.c:477
         [<000000000f9c740b>] __sys_connect+0x11d/0x170 net/socket.c:1840
         [...]

The bug is that most callers of llc_conn_send_pdu() assume it consumes a
reference to the skb, when actually due to commit b85ab56c3f81 ("llc:
properly handle dev_queue_xmit() return value") it doesn't.

Revert most of that commit, and instead make the few places that need
llc_conn_send_pdu() to *not* consume a reference call skb_get() before.

Fixes: b85ab56c3f81 ("llc: properly handle dev_queue_xmit() return value")
Reported-by: syzbot+6b825a6494a04cc0e3f7@syzkaller.appspotmail.com
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

llc: fix sk_buff leak in llc_sap_state_process()

commit c6ee11c39fcc1fb55130748990a8f199e76263b4 upstream.

syzbot reported:

    BUG: memory leak
    unreferenced object 0xffff888116270800 (size 224):
       comm "syz-executor641", pid 7047, jiffies 4294947360 (age 13.860s)
       hex dump (first 32 bytes):
         00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
         00 20 e1 2a 81 88 ff ff 00 40 3d 2a 81 88 ff ff  . .*.....@=*....
       backtrace:
         [<000000004d41b4cc>] kmemleak_alloc_recursive  include/linux/kmemleak.h:55 [inline]
         [<000000004d41b4cc>] slab_post_alloc_hook mm/slab.h:439 [inline]
         [<000000004d41b4cc>] slab_alloc_node mm/slab.c:3269 [inline]
         [<000000004d41b4cc>] kmem_cache_alloc_node+0x153/0x2a0 mm/slab.c:3579
         [<00000000506a5965>] __alloc_skb+0x6e/0x210 net/core/skbuff.c:198
         [<000000001ba5a161>] alloc_skb include/linux/skbuff.h:1058 [inline]
         [<000000001ba5a161>] alloc_skb_with_frags+0x5f/0x250  net/core/skbuff.c:5327
         [<0000000047d9c78b>] sock_alloc_send_pskb+0x269/0x2a0  net/core/sock.c:2225
         [<000000003828fe54>] sock_alloc_send_skb+0x32/0x40 net/core/sock.c:2242
         [<00000000e34d94f9>] llc_ui_sendmsg+0x10a/0x540 net/llc/af_llc.c:933
         [<00000000de2de3fb>] sock_sendmsg_nosec net/socket.c:652 [inline]
         [<00000000de2de3fb>] sock_sendmsg+0x54/0x70 net/socket.c:671
         [<000000008fe16e7a>] __sys_sendto+0x148/0x1f0 net/socket.c:1964
 [...]

The bug is that llc_sap_state_process() always takes an extra reference
to the skb, but sometimes neither llc_sap_next_state() nor
llc_sap_state_process() itself drops this reference.

Fix it by changing llc_sap_next_state() to never consume a reference to
the skb, rather than sometimes do so and sometimes not.  Then remove the
extra skb_get() and kfree_skb() from llc_sap_state_process().

Reported-by: syzbot+6bf095f9becf5efef645@syzkaller.appspotmail.com
Reported-by: syzbot+31c16aa4202dace3812e@syzkaller.appspotmail.com
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dmaengine: cppi41: Fix cppi41_dma_prep_slave_sg() when idle

commit bacdcb6675e170bb2e8d3824da220e10274f42a7 upstream.

Yegor Yefremov <yegorslists@googlemail.com> reported that musb and ftdi
uart can fail for the first open of the uart unless connected using
a hub.

This is because the first dma call done by musb_ep_program() must wait
if cppi41 is PM runtime suspended. Otherwise musb_ep_program() continues
with other non-dma packets before the DMA transfer is started causing at
least ftdi uarts to fail to receive data.

Let's fix the issue by waking up cppi41 with PM runtime calls added to
cppi41_dma_prep_slave_sg() and return NULL if still idled. This way we
have musb_ep_program() continue with PIO until cppi41 is awake.

Fixes: fdea2d09b997 ("dmaengine: cppi41: Add basic PM runtime support")
Reported-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Cc: stable@vger.kernel.org # v4.9+
Link: https://lore.kernel.org/r/20191023153138.23442-1-tony@atomide.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rtlwifi: Fix potential overflow on P2P code

commit 8c55dedb795be8ec0cf488f98c03a1c2176f7fb1 upstream.

Nicolas Waisman noticed that even though noa_len is checked for
a compatible length it's still possible to overrun the buffers
of p2pinfo since there's no check on the upper bound of noa_num.
Bound noa_num against P2P_MAX_NOA_NUM.

Reported-by: Nicolas Waisman <nico@semmle.com>
Signed-off-by: Laura Abbott <labbott@redhat.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

s390/cmm: fix information leak in cmm_timeout_handler()

commit b8e51a6a9db94bc1fb18ae831b3dab106b5a4b5f upstream.

The problem is that we were putting the NUL terminator too far:

buf[sizeof(buf) - 1] = '\0';

If the user input isn't NUL terminated and they haven't initialized the
whole buffer then it leads to an info leak.  The NUL terminator should
be:

buf[len - 1] = '\0';

Signed-off-by: Yihui Zeng <yzeng56@asu.edu>
Cc: stable@vger.kernel.org
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
[heiko.carstens@de.ibm.com: keep semantics of how *lenp and *ppos are handled]
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>