perf report: Add warning when libunwind not compiled in

[ Upstream commit 800d3f561659b5436f8c57e7c26dd1f6928b5615 ]

We received a user report that call-graph DWARF mode was enabled in
'perf record' but 'perf report' didn't unwind the callstack correctly.
The reason was, libunwind was not compiled in.

We can use 'perf -vv' to check the compiled libraries but it would be
valuable to report a warning to user directly (especially valuable for
a perf newbie).

The warning is:

Warning:
Please install libunwind development packages during the perf build.

Both TUI and stdio are supported.

Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20191011022122.26369-1-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf test: Report failure for mmap events

[ Upstream commit 6add129c5d9210ada25217abc130df0b7096ee02 ]

When fail to mmap events in task exit case, it misses to set 'err' to
-1; thus the testing will not report failure for it.

This patch sets 'err' to -1 when fails to mmap events, thus Perf tool
can report correct result.

Fixes: d723a55096b8 ("perf test: Add test case for checking number of EXIT events")
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lore.kernel.org/lkml/20191011091942.29841-1-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

x86/mm: Use the correct function type for native_set_fixmap()

[ Upstream commit f53e2cd0b8ab7d9e390414470bdbd830f660133f ]

We call native_set_fixmap indirectly through the function pointer
struct pv_mmu_ops::set_fixmap, which expects the first parameter to be
'unsigned' instead of 'enum fixed_addresses'. This patch changes the
function type for native_set_fixmap to match the pointer, which fixes
indirect call mismatches with Control-Flow Integrity (CFI) checking.

Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: H . Peter Anvin <hpa@zytor.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20190913211402.193018-1-samitolvanen@google.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

extcon: sm5502: Reset registers during initialization

[ Upstream commit 6942635032cfd3e003e980d2dfa4e6323a3ce145 ]

On some devices (e.g. Samsung Galaxy A5 (2015)), the bootloader
seems to keep interrupts enabled for SM5502 when booting Linux.
Changing the cable state (i.e. plugging in a cable) - until the driver
is loaded - will therefore produce an interrupt that is never read.

In this situation, the cable state will be stuck forever on the
initial state because SM5502 stops sending interrupts.
This can be avoided by clearing those pending interrupts after
the driver has been loaded.

One way to do this is to reset all registers to default state
by writing to SM5502_REG_RESET. This ensures that we start from
a clean state, with all interrupts disabled.

Suggested-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: ti-vpe: vpe: Make sure YUYV is set as default format

[ Upstream commit e20b248051ca0f90d84b4d9378e4780bc31f16c6 ]

v4l2-compliance fails with this message:

   fail: v4l2-test-formats.cpp(672): \
Video Capture Multiplanar: TRY_FMT(G_FMT) != G_FMT
   fail: v4l2-test-formats.cpp(672): \
Video Output Multiplanar: TRY_FMT(G_FMT) != G_FMT
...
   test VIDIOC_TRY_FMT: FAIL

The default pixel format was setup as pointing to a specific offset in
the vpe_formats table assuming it was pointing to the V4L2_PIX_FMT_YUYV
entry. This became false after the addition on the NV21 format (see
above commid-id)

So instead of hard-coding an offset which might change over time we need
to use a lookup helper instead so we know the default will always be what
we intended.

Signed-off-by: Benoit Parrot <bparrot@ti.com>
Fixes: 40cc823f7005 ("media: ti-vpe: Add support for NV21 format")
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: ti-vpe: vpe: fix a v4l2-compliance failure about frame sequence number

[ Upstream commit 2444846c0dbfa4ead21b621e4300ec32c90fbf38 ]

v4l2-compliance fails with this message:

   fail: v4l2-test-buffers.cpp(294): \
(int)g_sequence() < seq.last_seq + 1
   fail: v4l2-test-buffers.cpp(740): \
buf.check(m2m_q, last_m2m_seq)
   fail: v4l2-test-buffers.cpp(974): \
captureBufs(node, q, m2m_q, frame_count, true)
   test MMAP: FAIL

The driver is failing to update the source frame sequence number in the
vb2 buffer object. Only the destination frame sequence was being
updated.

This is only a reporting issue if the user space app actually cares
about the frame sequence number. But it is fixed nonetheless.

Signed-off-by: Benoit Parrot <bparrot@ti.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: ti-vpe: vpe: fix a v4l2-compliance warning about invalid pixel format

[ Upstream commit 06bec72b250b2cb3ba96fa45c2b8e0fb83745517 ]

v4l2-compliance warns with this message:

   warn: v4l2-test-formats.cpp(717): \
  TRY_FMT cannot handle an invalid pixelformat.
   warn: v4l2-test-formats.cpp(718): \
  This may or may not be a problem. For more information see:
   warn: v4l2-test-formats.cpp(719): \
  http://www.mail-archive.com/linux-media@vger.kernel.org/msg56550.html
...
   test VIDIOC_TRY_FMT: FAIL

We need to make sure that the returns a valid pixel format in all
instance. Based on the v4l2 framework convention drivers must return a
valid pixel format when the requested pixel format is either invalid or
not supported.

Signed-off-by: Benoit Parrot <bparrot@ti.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mwifiex: pcie: Fix memory leak in mwifiex_pcie_init_evt_ring

[ Upstream commit d10dcb615c8e29d403a24d35f8310a7a53e3050c ]

In mwifiex_pcie_init_evt_ring, a new skb is allocated which should be
released if mwifiex_map_pci_memory() fails. The release for skb and
card->evtbd_ring_vbase is added.

Fixes: 0732484b47b5 ("mwifiex: separate ring initialization and ring creation routines")
Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Acked-by: Ganapathi Bhat <gbhat@marvell.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

samples: pktgen: fix proc_cmd command result check logic

[ Upstream commit 3cad8f911575191fb3b81d8ed0e061e30f922223 ]

Currently, proc_cmd is used to dispatch command to 'pg_ctrl', 'pg_thread',
'pg_set'. proc_cmd is designed to check command result with grep the
"Result:", but this might fail since this string is only shown in
'pg_thread' and 'pg_set'.

This commit fixes this logic by grep-ing the "Result:" string only when
the command is not for 'pg_ctrl'.

For clarity of an execution flow, 'errexit' flag has been set.

To cleanup pktgen on exit, trap has been added for EXIT signal.

Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: cec-funcs.h: add status_req checks

[ Upstream commit 9b211f9c5a0b67afc435b86f75d78273b97db1c5 ]

The CEC_MSG_GIVE_DECK_STATUS and CEC_MSG_GIVE_TUNER_DEVICE_STATUS commands
both have a status_req argument: ON, OFF, ONCE. If ON or ONCE, then the
follower will reply with a STATUS message. Either once or whenever the
status changes (status_req == ON).

If status_req == OFF, then it will stop sending continuous status updates,
but the follower will *not* send a STATUS message in that case.

This means that if status_req == OFF, then msg->reply should be 0 as well
since no reply is expected in that case.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: flexcop-usb: fix NULL-ptr deref in flexcop_usb_transfer_init()

[ Upstream commit 649cd16c438f51d4cd777e71ca1f47f6e0c5e65d ]

If usb_set_interface() failed, iface->cur_altsetting will
not be assigned and it will be used in flexcop_usb_transfer_init()
It may lead a NULL pointer dereference.

Check usb_set_interface() return value in flexcop_usb_init()
and return failed to avoid using this NULL pointer.

Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

regulator: max8907: Fix the usage of uninitialized variable in max8907_regulator_probe()

[ Upstream commit 472b39c3d1bba0616eb0e9a8fa3ad0f56927c7d7 ]

Inside function max8907_regulator_probe(), variable val could
be uninitialized if regmap_read() fails. However, val is used
later in the if statement to decide the content written to
"pmic", which is potentially unsafe.

Signed-off-by: Yizhuo <yzhai003@ucr.edu>
Link: https://lore.kernel.org/r/20191003175813.16415-1-yzhai003@ucr.edu
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

hwrng: omap3-rom - Call clk_disable_unprepare() on exit only if not idled

[ Upstream commit eaecce12f5f0d2c35d278e41e1bc4522393861ab ]

When unloading omap3-rom-rng, we'll get the following:

WARNING: CPU: 0 PID: 100 at drivers/clk/clk.c:948 clk_core_disable

This is because the clock may be already disabled by omap3_rom_rng_idle().
Let's fix the issue by checking for rng_idle on exit.

Cc: Aaro Koskinen <aaro.koskinen@iki.fi>
Cc: Adam Ford <aford173@gmail.com>
Cc: Pali Rohár <pali.rohar@gmail.com>
Cc: Sebastian Reichel <sre@kernel.org>
Cc: Tero Kristo <t-kristo@ti.com>
Fixes: 1c6b7c2108bd ("hwrng: OMAP3 ROM Random Number Generator support")
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: renesas_usbhs: add suspend event support in gadget mode

[ Upstream commit 39abcc84846bbc0538f13c190b6a9c7e36890cd2 ]

When R-Car Gen3 USB 2.0 is in Gadget mode, if host is detached an interrupt
will be generated and Suspended state bit is set in interrupt status
register. Interrupt handler will call driver->suspend(composite_suspend)
if suspended state bit is set. composite_suspend will call
ffs_func_suspend which will post FUNCTIONFS_SUSPEND and will be consumed
by user space application via /dev/ep0.

To be able to detect host detach, extend the DVSQ_MASK to cover the
Suspended bit of the DVSQ[2:0] bitfield from the Interrupt Status
Register 0 (INTSTS0) register and perform appropriate action in the
DVST interrupt handler (usbhsg_irq_dev_state).

Without this commit, disconnection of the phone from R-Car-H3 ES2.0
Salvator-X CN9 port is not recognized and reverse role switch does
not happen. If phone is connected again it does not enumerate.

With this commit, disconnection will be recognized and reverse role
switch will happen by a user space application. If phone is connected
again it will enumerate properly and will become visible in the output
of 'lsusb'.

Signed-off-by: Veeraiyan Chidambaram <veeraiyan.chidambaram@in.bosch.com>
Signed-off-by: Eugeniu Rosca <erosca@de.adit-jv.com>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/1568207756-22325-3-git-send-email-external.veeraiyan.c@de.adit-jv.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tools/power/cpupower: Fix initializer override in hsw_ext_cstates

[ Upstream commit 7e5705c635ecfccde559ebbbe1eaf05b5cc60529 ]

When building cpupower with clang, the following warning appears:

 utils/idle_monitor/hsw_ext_idle.c:42:16: warning: initializer overrides
 prior initialization of this subobject [-Winitializer-overrides]
                 .desc                   = N_("Processor Package C2"),
                                              ^~~~~~~~~~~~~~~~~~~~~~
 ./utils/helpers/helpers.h:25:33: note: expanded from macro 'N_'
 #define N_(String) gettext_noop(String)
                                 ^~~~~~
 ./utils/helpers/helpers.h:23:30: note: expanded from macro
 'gettext_noop'
 #define gettext_noop(String) String
                              ^~~~~~
 utils/idle_monitor/hsw_ext_idle.c:41:16: note: previous initialization
 is here
                 .desc                   = N_("Processor Package C9"),
                                              ^~~~~~~~~~~~~~~~~~~~~~
 ./utils/helpers/helpers.h:25:33: note: expanded from macro 'N_'
 #define N_(String) gettext_noop(String)
                                 ^~~~~~
 ./utils/helpers/helpers.h:23:30: note: expanded from macro
 'gettext_noop'
 #define gettext_noop(String) String
                             ^~~~~~
 1 warning generated.

This appears to be a copy and paste or merge mistake because the name
and id fields both have PC9 in them, not PC2. Remove the second
assignment to fix the warning.

Fixes: 7ee767b69b68 ("cpupower: Add Haswell family 0x45 specific idle monitor to show PC8,9,10 states")
Link: https://github.com/ClangBuiltLinux/linux/issues/718
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: ov6650: Fix stored frame format not in sync with hardware

[ Upstream commit 3143b459de4cdcce67b36827476c966e93c1cf01 ]

The driver stores frame format settings supposed to be in line with
hardware state in a device private structure.  Since the driver initial
submission, those settings are updated before they are actually applied
on hardware.  If an error occurs on device update, the stored settings
my not reflect hardware state anymore and consecutive calls to
.get_fmt() may return incorrect information.  That in turn may affect
ability of a bridge device to use correct DMA transfer settings if such
incorrect informmation on active frame format returned by .get_fmt() is
used.

Assuming a failed device update means its state hasn't changed, update
frame format related settings stored in the device private structure
only after they are successfully applied so the stored values always
reflect hardware state as closely as possible.

Fixes: 2f6e2404799a ("[media] SoC Camera: add driver for OV6650 sensor")
Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: i2c: ov2659: Fix missing 720p register config

[ Upstream commit 9d669fbfca20e6035ead814e55d9ef1a6b500540 ]

The initial registers sequence is only loaded at probe
time. Afterward only the resolution and format specific
register are modified. Care must be taken to make sure
registers modified by one resolution setting are reverted
back when another resolution is programmed.

This was not done properly for the 720p case.

Signed-off-by: Benoit Parrot <bparrot@ti.com>
Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: i2c: ov2659: fix s_stream return value

[ Upstream commit 85c4043f1d403c222d481dfc91846227d66663fb ]

In ov2659_s_stream() return value for invoked function should be checked
and propagated.

Signed-off-by: Benoit Parrot <bparrot@ti.com>
Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: am437x-vpfe: Setting STD to current value is not an error

[ Upstream commit 13aa21cfe92ce9ebb51824029d89f19c33f81419 ]

VIDIOC_S_STD should not return an error if the value is identical
to the current one.
This error was highlighted by the v4l2-compliance test.

Signed-off-by: Benoit Parrot <bparrot@ti.com>
Acked-by: Lad Prabhakar <prabhakar.csengg@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

IB/iser: bound protection_sg size by data_sg size

[ Upstream commit 7718cf03c3ce4b6ebd90107643ccd01c952a1fce ]

In case we don't set the sg_prot_tablesize, the scsi layer assign the
default size (65535 entries). We should limit this size since we should
take into consideration the underlaying device capability. This cap is
considered when calculating the sg_tablesize. Otherwise, for example,
we can get that /sys/block/sdb/queue/max_segments is 128 and
/sys/block/sdb/queue/max_integrity_segments is 65535.

Link: https://lore.kernel.org/r/1569359027-10987-1-git-send-email-maxg@mellanox.com
Signed-off-by: Max Gurtovoy <maxg@mellanox.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

libertas: fix a potential NULL pointer dereference

[ Upstream commit 7da413a18583baaf35dd4a8eb414fa410367d7f2 ]

alloc_workqueue is not checked for errors and as a result,
a potential NULL dereference could occur.

Signed-off-by: Allen Pais <allen.pais@oracle.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

rtlwifi: prevent memory leak in rtl_usb_probe

[ Upstream commit 3f93616951138a598d930dcaec40f2bfd9ce43bb ]

In rtl_usb_probe if allocation for usb_data fails the allocated hw
should be released. In addition the allocated rtlpriv->usb_data should
be released on error handling path.

Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

staging: rtl8188eu: fix possible null dereference

[ Upstream commit 228241944a48113470d3c3b46c88ba7fbe0a274b ]

Inside a nested 'else' block at the beginning of this function is a
call that assigns 'psta' to the return value of 'rtw_get_stainfo()'.
If 'rtw_get_stainfo()' returns NULL and the flow of control reaches
the 'else if' where 'psta' is dereferenced, then we will dereference
a NULL pointer.

Fix this by checking if 'psta' is not NULL before reading its
'psta->qos_option' data member.

Addresses-Coverity: ("Dereference null return value")

Signed-off-by: Connor Kuehl <connor.kuehl@canonical.com>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Link: https://lore.kernel.org/r/20190926150317.5894-1-connor.kuehl@canonical.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

staging: rtl8192u: fix multiple memory leaks on error path

[ Upstream commit ca312438cf176a16d4b89350cade8789ba8d7133 ]

In rtl8192_tx on error handling path allocated urbs and also skb should
be released.

Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Link: https://lore.kernel.org/r/20190920025137.29407-1-navid.emamdoost@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

spi: Add call to spi_slave_abort() function when spidev driver is released

[ Upstream commit 9f918a728cf86b2757b6a7025e1f46824bfe3155 ]

This change is necessary for spidev devices (e.g. /dev/spidev3.0) working
in the slave mode (like NXP's dspi driver for Vybrid SoC).

When SPI HW works in this mode - the master is responsible for providing
CS and CLK signals. However, when some fault happens - like for example
distortion on SPI lines - the SPI Linux driver needs a chance to recover
from this abnormal situation and prepare itself for next (correct)
transmission.

This change doesn't pose any threat on drivers working in master mode as
spi_slave_abort() function checks if SPI slave mode is supported.

Signed-off-by: Lukasz Majewski <lukma@denx.de>
Link: https://lore.kernel.org/r/20190924110547.14770-2-lukma@denx.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Reported-by: kbuild test robot <lkp@intel.com>
Link: https://lore.kernel.org/r/20190925091143.15468-2-lukma@denx.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iio: light: bh1750: Resolve compiler warning and make code more readable

[ Upstream commit f552fde983d378e7339f9ea74a25f918563bf0d3 ]

Separate the declaration of struct bh1750_chip_info from definition
of bh1750_chip_info_tbl[] in a single statement as it makes the code
hard to read, and with the extra newline it makes it look as if the
bh1750_chip_info_tbl[] had no explicit type.

This change also resolves the following compiler warning about the
unusual position of the static keyword that can be seen when building
with warnings enabled (W=1):

drivers/iio/light/bh1750.c:64:1: warning:
  ‘static’ is not at beginning of declaration [-Wold-style-declaration]

Related to commit 3a11fbb037a1 ("iio: light: add support for ROHM
BH1710/BH1715/BH1721/BH1750/BH1751 ambient light sensors").

Signed-off-by: Krzysztof Wilczynski <kw@linux.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/bridge: analogix-anx78xx: silence -EPROBE_DEFER warnings

[ Upstream commit 2708e876272d89bbbff811d12834adbeef85f022 ]

Silence two warning messages that occur due to -EPROBE_DEFER errors to
help cleanup the system boot log.

Signed-off-by: Brian Masney <masneyb@onstation.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190815004854.19860-4-masneyb@onstation.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm: mst: Fix query_payload ack reply struct

[ Upstream commit 268de6530aa18fe5773062367fd119f0045f6e88 ]

Spec says[1] Allocated_PBN is 16 bits

[1]- DisplayPort 1.2 Spec, Section 2.11.9.8, Table 2-98

Fixes: ad7f8a1f9ced ("drm/helper: add Displayport multi-stream helper (v0.6)")
Cc: Lyude Paul <lyude@redhat.com>
Cc: Todd Previte <tprevite@gmail.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190829165223.129662-1-sean@poorly.run
Signed-off-by: Sasha Levin <sashal@kernel.org>

ALSA: hda/ca0132 - Avoid endless loop

commit cb04fc3b6b076f67d228a0b7d096c69ad486c09c upstream.

Introduce a timeout to dspio_clear_response_queue() so that it won't
be caught in an endless loop even if the hardware doesn't respond
properly.

Fixes: a73d511c4867 ("ALSA: hda/ca0132: Add unsol handler for DSP and jack detection")
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20191213085111.22855-3-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/ca0132 - Keep power on during processing DSP response

commit 377bc0cfabce0244632dada19060839ced4e6949 upstream.

We need to keep power on while processing the DSP response via unsol
event.  Each snd_hda_codec_read() call does the power management, so
it should work normally, but still it's safer to keep the power up for
the whole function.

Fixes: a73d511c4867 ("ALSA: hda/ca0132: Add unsol handler for DSP and jack detection")
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20191213085111.22855-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: pcm: Avoid possible info leaks from PCM stream buffers

commit add9d56d7b3781532208afbff5509d7382fb6efe upstream.

The current PCM code doesn't initialize explicitly the buffers
allocated for PCM streams, hence it might leak some uninitialized
kernel data or previous stream contents by mmapping or reading the
buffer before actually starting the stream.

Since this is a common problem, this patch simply adds the clearance
of the buffer data at hw_params callback.  Although this does only
zero-clear no matter which format is used, which doesn't mean the
silence for some formats, but it should be OK because the intention is
just to clear the previous data on the buffer.

Reported-by: Lionel Koenig <lionel.koenig@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20191211155742.3213-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: handle ENOENT in btrfs_uuid_tree_iterate

commit 714cd3e8cba6841220dce9063a7388a81de03825 upstream.

If we get an -ENOENT back from btrfs_uuid_iter_rem when iterating the
uuid tree we'll just continue and do btrfs_next_item().  However we've
done a btrfs_release_path() at this point and no longer have a valid
path.  So increment the key and go back and do a normal search.

CC: stable@vger.kernel.org # 4.4+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: do not leak reloc root if we fail to read the fs root

commit ca1aa2818a53875cfdd175fb5e9a2984e997cce9 upstream.

If we fail to read the fs root corresponding with a reloc root we'll
just break out and free the reloc roots.  But we remove our current
reloc_root from this list higher up, which means we'll leak this
reloc_root.  Fix this by adding ourselves back to the reloc_roots list
so we are properly cleaned up.

CC: stable@vger.kernel.org # 4.4+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: skip log replay on orphaned roots

commit 9bc574de590510eff899c3ca8dbaf013566b5efe upstream.

My fsstress modifications coupled with generic/475 uncovered a failure
to mount and replay the log if we hit a orphaned root.  We do not want
to replay the log for an orphan root, but it's completely legitimate to
have an orphaned root with a log attached.  Fix this by simply skipping
replaying the log.  We still need to pin it's root node so that we do
not overwrite it while replaying other logs, as we re-read the log root
at every stage of the replay.

CC: stable@vger.kernel.org # 4.4+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 4.9.207

net: stmmac: don't stop NAPI processing when dropping a packet

commit 07b3975352374c3f5ebb4a42ef0b253fe370542d upstream.

Currently, if we drop a packet, we exit from NAPI loop before the budget
is consumed. In some situations this will make the RX processing stall
e.g. when flood pinging the system with oversized packets, as the
errorneous packets are not dropped efficiently.

If we drop a packet, we should just continue to the next one as long as
the budget allows.

Signed-off-by: Aaro Koskinen <aaro.koskinen@nokia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
[acj: backport v4.9 -stable
-adjust context]
Signed-off-by: Aviraj CJ <acj@cisco.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: stmmac: use correct DMA buffer size in the RX descriptor

commit 583e6361414903c5206258a30e5bd88cb03c0254 upstream.

We always program the maximum DMA buffer size into the receive descriptor,
although the allocated size may be less. E.g. with the default MTU size
we allocate only 1536 bytes. If somebody sends us a bigger frame, then
memory may get corrupted.

Fix by using exact buffer sizes.

Signed-off-by: Aaro Koskinen <aaro.koskinen@nokia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
[acj: backport to v4.9 -stable :
- adjust context
- skipped the section modifying non-existent functions in dwxgmac2_descs.c and
hwif.h ]
Signed-off-by: Aviraj CJ <acj@cisco.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xhci: fix USB3 device initiated resume race with roothub autosuspend

commit 057d476fff778f1d3b9f861fdb5437ea1a3cfc99 upstream.

A race in xhci USB3 remote wake handling may force device back to suspend
after it initiated resume siganaling, causing a missed resume event or warm
reset of device.

When a USB3 link completes resume signaling and goes to enabled (UO)
state a interrupt is issued and the interrupt handler will clear the
bus_state->port_remote_wakeup resume flag, allowing bus suspend.

If the USB3 roothub thread just finished reading port status before
the interrupt, finding ports still in suspended (U3) state, but hasn't
yet started suspending the hub, then the xhci interrupt handler will clear
the flag that prevented roothub suspend and allow bus to suspend, forcing
all port links back to suspended (U3) state.

Example case:
usb_runtime_suspend() # because all ports still show suspended U3
  usb_suspend_both()
    hub_suspend();   # successful as hub->wakeup_bits not set yet
==> INTERRUPT
xhci_irq()
  handle_port_status()
    clear bus_state->port_remote_wakeup
    usb_wakeup_notification()
      sets hub->wakeup_bits;
        kick_hub_wq()
<== END INTERRUPT
      hcd_bus_suspend()
        xhci_bus_suspend() # success as port_remote_wakeup bits cleared

Fix this by increasing roothub usage count during port resume to prevent
roothub autosuspend, and by making sure bus_state->port_remote_wakeup
flag is only cleared after resume completion is visible, i.e.
after xhci roothub returned U0 or other non-U3 link state link on a
get port status request.

Issue rootcaused by Chiasheng Lee

Cc: <stable@vger.kernel.org>
Cc: Lee, Hou-hsun <hou-hsun.lee@intel.com>
Reported-by: Lee, Chiasheng <chiasheng.lee@intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20191211142007.8847-3-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/radeon: fix r1xx/r2xx register checker for POT textures

commit 008037d4d972c9c47b273e40e52ae34f9d9e33e7 upstream.

Shift and mask were reversed.  Noticed by chance.

Tested-by: Meelis Roos <mroos@linux.ee>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: iscsi: Fix a potential deadlock in the timeout handler

commit 5480e299b5ae57956af01d4839c9fc88a465eeab upstream.

Some time ago the block layer was modified such that timeout handlers are
called from thread context instead of interrupt context. Make it safe to
run the iSCSI timeout handler in thread context. This patch fixes the
following lockdep complaint:

================================
WARNING: inconsistent lock state
5.5.1-dbg+ #11 Not tainted
--------------------------------
inconsistent {IN-SOFTIRQ-W} -> {SOFTIRQ-ON-W} usage.
kworker/7:1H/206 [HC0[0]:SC0[0]:HE1:SE1] takes:
ffff88802d9827e8 (&(&session->frwd_lock)->rlock){+.?.}, at: iscsi_eh_cmd_timed_out+0xa6/0x6d0 [libiscsi]
{IN-SOFTIRQ-W} state was registered at:
  lock_acquire+0x106/0x240
  _raw_spin_lock+0x38/0x50
  iscsi_check_transport_timeouts+0x3e/0x210 [libiscsi]
  call_timer_fn+0x132/0x470
  __run_timers.part.0+0x39f/0x5b0
  run_timer_softirq+0x63/0xc0
  __do_softirq+0x12d/0x5fd
  irq_exit+0xb3/0x110
  smp_apic_timer_interrupt+0x131/0x3d0
  apic_timer_interrupt+0xf/0x20
  default_idle+0x31/0x230
  arch_cpu_idle+0x13/0x20
  default_idle_call+0x53/0x60
  do_idle+0x38a/0x3f0
  cpu_startup_entry+0x24/0x30
  start_secondary+0x222/0x290
  secondary_startup_64+0xa4/0xb0
irq event stamp: 1383705
hardirqs last  enabled at (1383705): [<ffffffff81aace5c>] _raw_spin_unlock_irq+0x2c/0x50
hardirqs last disabled at (1383704): [<ffffffff81aacb98>] _raw_spin_lock_irq+0x18/0x50
softirqs last  enabled at (1383690): [<ffffffffa0e2efea>] iscsi_queuecommand+0x76a/0xa20 [libiscsi]
softirqs last disabled at (1383682): [<ffffffffa0e2e998>] iscsi_queuecommand+0x118/0xa20 [libiscsi]

other info that might help us debug this:
 Possible unsafe locking scenario:

       CPU0
       ----
  lock(&(&session->frwd_lock)->rlock);
  <Interrupt>
    lock(&(&session->frwd_lock)->rlock);

 *** DEADLOCK ***

2 locks held by kworker/7:1H/206:
 #0: ffff8880d57bf928 ((wq_completion)kblockd){+.+.}, at: process_one_work+0x472/0xab0
 #1: ffff88802b9c7de8 ((work_completion)(&q->timeout_work)){+.+.}, at: process_one_work+0x476/0xab0

stack backtrace:
CPU: 7 PID: 206 Comm: kworker/7:1H Not tainted 5.5.1-dbg+ #11
Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
Workqueue: kblockd blk_mq_timeout_work
Call Trace:
 dump_stack+0xa5/0xe6
 print_usage_bug.cold+0x232/0x23b
 mark_lock+0x8dc/0xa70
 __lock_acquire+0xcea/0x2af0
 lock_acquire+0x106/0x240
 _raw_spin_lock+0x38/0x50
 iscsi_eh_cmd_timed_out+0xa6/0x6d0 [libiscsi]
 scsi_times_out+0xf4/0x440 [scsi_mod]
 scsi_timeout+0x1d/0x20 [scsi_mod]
 blk_mq_check_expired+0x365/0x3a0
 bt_iter+0xd6/0xf0
 blk_mq_queue_tag_busy_iter+0x3de/0x650
 blk_mq_timeout_work+0x1af/0x380
 process_one_work+0x56d/0xab0
 worker_thread+0x7a/0x5d0
 kthread+0x1bc/0x210
 ret_from_fork+0x24/0x30

Fixes: 287922eb0b18 ("block: defer timeouts to a workqueue")
Cc: Christoph Hellwig <hch@lst.de>
Cc: Keith Busch <keith.busch@intel.com>
Cc: Lee Duncan <lduncan@suse.com>
Cc: Chris Leech <cleech@redhat.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20191209173457.187370-1-bvanassche@acm.org
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dm btree: increase rebalance threshold in __rebalance2()

commit 474e559567fa631dea8fb8407ab1b6090c903755 upstream.

We got the following warnings from thin_check during thin-pool setup:

  $ thin_check /dev/vdb
  examining superblock
  examining devices tree
    missing devices: [1, 84]
      too few entries in btree_node: 41, expected at least 42 (block 138, max_entries = 126)
  examining mapping tree

The phenomenon is the number of entries in one node of details_info tree is
less than (max_entries / 3). And it can be easily reproduced by the following
procedures:

  $ new a thin pool
  $ presume the max entries of details_info tree is 126
  $ new 127 thin devices (e.g. 1~127) to make the root node being full
    and then split
  $ remove the first 43 (e.g. 1~43) thin devices to make the children
    reblance repeatedly
  $ stop the thin pool
  $ thin_check

The root cause is that the B-tree removal procedure in __rebalance2()
doesn't guarantee the invariance: the minimal number of entries in
non-root node should be >= (max_entries / 3).

Simply fix the problem by increasing the rebalance threshold to
make sure the number of entries in each child will be greater
than or equal to (max_entries / 3 + 1), so no matter which
child is used for removal, the number will still be valid.

Cc: stable@vger.kernel.org
Signed-off-by: Hou Tao <houtao1@huawei.com>
Acked-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dma-buf: Fix memory leak in sync_file_merge()

commit 6645d42d79d33e8a9fe262660a75d5f4556bbea9 upstream.

In the implementation of sync_file_merge() the allocated sync_file is
leaked if number of fences overflows. Release sync_file by goto err.

Fixes: a02b9dc90d84 ("dma-buf/sync_file: refactor fence storage in struct sync_file")
Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20191122220957.30427-1-navid.emamdoost@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

vfio/pci: call irq_bypass_unregister_producer() before freeing irq

commit d567fb8819162099035e546b11a736e29c2af0ea upstream.

Since irq_bypass_register_producer() is called after request_irq(), we
should do tear-down in reverse order: irq_bypass_unregister_producer()
then free_irq().

Specifically free_irq() may release resources required by the
irqbypass del_producer() callback.  Notably an example provided by
Marc Zyngier on arm64 with GICv4 that he indicates has the potential
to wedge the hardware:

 free_irq(irq)
   __free_irq(irq)
     irq_domain_deactivate_irq(irq)
       its_irq_domain_deactivate()
         [unmap the VLPI from the ITS]

 kvm_arch_irq_bypass_del_producer(cons, prod)
   kvm_vgic_v4_unset_forwarding(kvm, irq, ...)
     its_unmap_vlpi(irq)
       [Unmap the VLPI from the ITS (again), remap the original LPI]

Signed-off-by: Jiang Yi <giangyi@amazon.com>
Cc: stable@vger.kernel.org # v4.4+
Fixes: 6d7425f109d26 ("vfio: Register/unregister irq_bypass_producer")
Link: https://lore.kernel.org/kvm/20191127164910.15888-1-giangyi@amazon.com
Reviewed-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
[aw: commit log]
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: tegra: Fix FLOW_CTLR_HALT register clobbering by tegra_resume()

commit d70f7d31a9e2088e8a507194354d41ea10062994 upstream.

There is an unfortunate typo in the code that results in writing to
FLOW_CTLR_HALT instead of FLOW_CTLR_CSR.

Cc: <stable@vger.kernel.org>
Acked-by: Peter De Schrijver <pdeschrijver@nvidia.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: dts: s3c64xx: Fix init order of clock providers

commit d60d0cff4ab01255b25375425745c3cff69558ad upstream.

fin_pll is the parent of clock-controller@7e00f000, specify
the dependency to ensure proper initialization order of clock
providers.

without this patch:
[    0.000000] S3C6410 clocks: apll = 0, mpll = 0
[    0.000000]  epll = 0, arm_clk = 0

with this patch:
[    0.000000] S3C6410 clocks: apll = 532000000, mpll = 532000000
[    0.000000]  epll = 24000000, arm_clk = 532000000

Cc: <stable@vger.kernel.org>
Fixes: 3f6d439f2022 ("clk: reverse default clk provider initialization order in of_clk_init()")
Signed-off-by: Lihua Yao <ylhuajnu@outlook.com>
Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

CIFS: Respect O_SYNC and O_DIRECT flags during reconnect

commit 44805b0e62f15e90d233485420e1847133716bdc upstream.

Currently the client translates O_SYNC and O_DIRECT flags
into corresponding SMB create options when openning a file.
The problem is that on reconnect when the file is being
re-opened the client doesn't set those flags and it causes
a server to reject re-open requests because create options
don't match. The latter means that any subsequent system
call against that open file fail until a share is re-mounted.

Fix this by properly setting SMB create options when
re-openning files after reconnects.

Fixes: 1013e760d10e6: ("SMB3: Don't ignore O_SYNC/O_DSYNC and O_DIRECT flags")
Cc: Stable <stable@vger.kernel.org>
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xtensa: fix TLB sanity checker

commit 36de10c4788efc6efe6ff9aa10d38cb7eea4c818 upstream.

Virtual and translated addresses retrieved by the xtensa TLB sanity
checker must be consistent, i.e. correspond to the same state of the
checked TLB entry. KASAN shadow memory is mapped dynamically using
auto-refill TLB entries and thus may change TLB state between the
virtual and translated address retrieval, resulting in false TLB
insanity report.
Move read_xtlb_translation close to read_xtlb_virtual to make sure that
read values are consistent.

Cc: stable@vger.kernel.org
Fixes: a99e07ee5e88 ("xtensa: check TLB sanity on return to userspace")
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PCI/MSI: Fix incorrect MSI-X masking on resume

commit e045fa29e89383c717e308609edd19d2fd29e1be upstream.

When a driver enables MSI-X, msix_program_entries() reads the MSI-X Vector
Control register for each vector and saves it in desc->masked.  Each
register is 32 bits and bit 0 is the actual Mask bit.

When we restored these registers during resume, we previously set the Mask
bit if *any* bit in desc->masked was set instead of when the Mask bit
itself was set:

  pci_restore_state
    pci_restore_msi_state
      __pci_restore_msix_state
        for_each_pci_msi_entry
          msix_mask_irq(entry, entry->masked)   <-- entire u32 word
            __pci_msix_desc_mask_irq(desc, flag)
              mask_bits = desc->masked & ~PCI_MSIX_ENTRY_CTRL_MASKBIT
              if (flag)       <-- testing entire u32, not just bit 0
                mask_bits |= PCI_MSIX_ENTRY_CTRL_MASKBIT
              writel(mask_bits, desc_addr + PCI_MSIX_ENTRY_VECTOR_CTRL)

This means that after resume, MSI-X vectors were masked when they shouldn't
be, which leads to timeouts like this:

  nvme nvme0: I/O 978 QID 3 timeout, completion polled

On resume, set the Mask bit only when the saved Mask bit from suspend was
set.

This should remove the need for 19ea025e1d28 ("nvme: Add quirk for Kingston
NVME SSD running FW E8FK11.T").

[bhelgaas: commit log, move fix to __pci_msix_desc_mask_irq()]
Link: https://bugzilla.kernel.org/show_bug.cgi?id=204887
Link: https://lore.kernel.org/r/20191008034238.2503-1-jian-hong@endlessm.com
Fixes: f2440d9acbe8 ("PCI MSI: Refactor interrupt masking code")
Signed-off-by: Jian-Hong Pan <jian-hong@endlessm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PCI: Fix Intel ACS quirk UPDCR register address

commit d8558ac8c93d429d65d7490b512a3a67e559d0d4 upstream.

According to documentation [0] the correct offset for the Upstream Peer
Decode Configuration Register (UPDCR) is 0x1014.  It was previously defined
as 0x1114.

d99321b63b1f ("PCI: Enable quirks for PCIe ACS on Intel PCH root ports")
intended to enforce isolation between PCI devices allowing them to be put
into separate IOMMU groups.  Due to the wrong register offset the intended
isolation was not fully enforced.  This is fixed with this patch.

Please note that I did not test this patch because I have no hardware that
implements this register.

[0] https://www.intel.com/content/dam/www/public/us/en/documents/datasheets/4th-gen-core-family-mobile-i-o-datasheet.pdf (page 325)
Fixes: d99321b63b1f ("PCI: Enable quirks for PCIe ACS on Intel PCH root ports")
Link: https://lore.kernel.org/r/7a3505df-79ba-8a28-464c-88b83eefffa6@kernkonzept.com
Signed-off-by: Steffen Liebergeld <steffen.liebergeld@kernkonzept.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Andrew Murray <andrew.murray@arm.com>
Acked-by: Ashok Raj <ashok.raj@intel.com>
Cc: stable@vger.kernel.org # v3.15+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "regulator: Defer init completion for a while after late_initcall"

This reverts commit 8b8c8d69b1a31004517d4c71a490f47bdf3405a2 which is
commit 55576cf1853798e86f620766e23b604c9224c19c upstream.

It's causing "odd" interactions with older kernels, so it probably isn't
a good idea to cause timing changes there.  This has been reported to
cause oopses on Pixel devices.

Reported-by: Siddharth Kapoor <ksiddharth@google.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tcp: Protect accesses to .ts_recent_stamp with {READ,WRITE}_ONCE()

[ Upstream commit 721c8dafad26ccfa90ff659ee19755e3377b829d ]

Syncookies borrow the ->rx_opt.ts_recent_stamp field to store the
timestamp of the last synflood. Protect them with READ_ONCE() and
WRITE_ONCE() since reads and writes aren't serialised.

Use of .rx_opt.ts_recent_stamp for storing the synflood timestamp was
introduced by a0f82f64e269 ("syncookies: remove last_synq_overflow from
struct tcp_sock"). But unprotected accesses were already there when
timestamp was stored in .last_synq_overflow.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tcp: tighten acceptance of ACKs not matching a child socket

[ Upstream commit cb44a08f8647fd2e8db5cc9ac27cd8355fa392d8 ]

When no synflood occurs, the synflood timestamp isn't updated.
Therefore it can be so old that time_after32() can consider it to be
in the future.

That's a problem for tcp_synq_no_recent_overflow() as it may report
that a recent overflow occurred while, in fact, it's just that jiffies
has grown past 'last_overflow' + TCP_SYNCOOKIE_VALID + 2^31.

Spurious detection of recent overflows lead to extra syncookie
verification in cookie_v[46]_check(). At that point, the verification
should fail and the packet dropped. But we should have dropped the
packet earlier as we didn't even send a syncookie.

Let's refine tcp_synq_no_recent_overflow() to report a recent overflow
only if jiffies is within the
[last_overflow, last_overflow + TCP_SYNCOOKIE_VALID] interval. This
way, no spurious recent overflow is reported when jiffies wraps and
'last_overflow' becomes in the future from the point of view of
time_after32().

However, if jiffies wraps and enters the
[last_overflow, last_overflow + TCP_SYNCOOKIE_VALID] interval (with
'last_overflow' being a stale synflood timestamp), then
tcp_synq_no_recent_overflow() still erroneously reports an
overflow. In such cases, we have to rely on syncookie verification
to drop the packet. We unfortunately have no way to differentiate
between a fresh and a stale syncookie timestamp.

In practice, using last_overflow as lower bound is problematic.
If the synflood timestamp is concurrently updated between the time
we read jiffies and the moment we store the timestamp in
'last_overflow', then 'now' becomes smaller than 'last_overflow' and
tcp_synq_no_recent_overflow() returns true, potentially dropping a
valid syncookie.

Reading jiffies after loading the timestamp could fix the problem,
but that'd require a memory barrier. Let's just accommodate for
potential timestamp growth instead and extend the interval using
'last_overflow - HZ' as lower bound.

Signed-off-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tcp: fix rejected syncookies due to stale timestamps

[ Upstream commit 04d26e7b159a396372646a480f4caa166d1b6720 ]

If no synflood happens for a long enough period of time, then the
synflood timestamp isn't refreshed and jiffies can advance so much
that time_after32() can't accurately compare them any more.

Therefore, we can end up in a situation where time_after32(now,
last_overflow + HZ) returns false, just because these two values are
too far apart. In that case, the synflood timestamp isn't updated as
it should be, which can trick tcp_synq_no_recent_overflow() into
rejecting valid syncookies.

For example, let's consider the following scenario on a system
with HZ=1000:

  * The synflood timestamp is 0, either because that's the timestamp
    of the last synflood or, more commonly, because we're working with
    a freshly created socket.

  * We receive a new SYN, which triggers synflood protection. Let's say
    that this happens when jiffies == 2147484649 (that is,
    'synflood timestamp' + HZ + 2^31 + 1).

  * Then tcp_synq_overflow() doesn't update the synflood timestamp,
    because time_after32(2147484649, 1000) returns false.
    With:
      - 2147484649: the value of jiffies, aka. 'now'.
      - 1000: the value of 'last_overflow' + HZ.

  * A bit later, we receive the ACK completing the 3WHS. But
    cookie_v[46]_check() rejects it because tcp_synq_no_recent_overflow()
    says that we're not under synflood. That's because
    time_after32(2147484649, 120000) returns false.
    With:
      - 2147484649: the value of jiffies, aka. 'now'.
      - 120000: the value of 'last_overflow' + TCP_SYNCOOKIE_VALID.

    Of course, in reality jiffies would have increased a bit, but this
    condition will last for the next 119 seconds, which is far enough
    to accommodate for jiffie's growth.

Fix this by updating the overflow timestamp whenever jiffies isn't
within the [last_overflow, last_overflow + HZ] range. That shouldn't
have any performance impact since the update still happens at most once
per second.

Now we're guaranteed to have fresh timestamps while under synflood, so
tcp_synq_no_recent_overflow() can safely use it with time_after32() in
such situations.

Stale timestamps can still make tcp_synq_no_recent_overflow() return
the wrong verdict when not under synflood. This will be handled in the
next patch.

For 64 bits architectures, the problem was introduced with the
conversion of ->tw_ts_recent_stamp to 32 bits integer by commit
cca9bab1b72c ("tcp: use monotonic timestamps for PAWS").
The problem has always been there on 32 bits architectures.

Fixes: cca9bab1b72c ("tcp: use monotonic timestamps for PAWS")
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

inet: protect against too small mtu values.

[ Upstream commit 501a90c945103e8627406763dac418f20f3837b2 ]

syzbot was once again able to crash a host by setting a very small mtu
on loopback device.

Let's make inetdev_valid_mtu() available in include/net/ip.h,
and use it in ip_setup_cork(), so that we protect both ip_append_page()
and __ip_append_data()

Also add a READ_ONCE() when the device mtu is read.

Pairs this lockless read with one WRITE_ONCE() in __dev_set_mtu(),
even if other code paths might write over this field.

Add a big comment in include/linux/netdevice.h about dev->mtu
needing READ_ONCE()/WRITE_ONCE() annotations.

Hopefully we will add the missing ones in followup patches.

[1]

refcount_t: saturated; leaking memory.
WARNING: CPU: 0 PID: 9464 at lib/refcount.c:22 refcount_warn_saturate+0x138/0x1f0 lib/refcount.c:22
Kernel panic - not syncing: panic_on_warn set ...
CPU: 0 PID: 9464 Comm: syz-executor850 Not tainted 5.4.0-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x197/0x210 lib/dump_stack.c:118
 panic+0x2e3/0x75c kernel/panic.c:221
 __warn.cold+0x2f/0x3e kernel/panic.c:582
 report_bug+0x289/0x300 lib/bug.c:195
 fixup_bug arch/x86/kernel/traps.c:174 [inline]
 fixup_bug arch/x86/kernel/traps.c:169 [inline]
 do_error_trap+0x11b/0x200 arch/x86/kernel/traps.c:267
 do_invalid_op+0x37/0x50 arch/x86/kernel/traps.c:286
 invalid_op+0x23/0x30 arch/x86/entry/entry_64.S:1027
RIP: 0010:refcount_warn_saturate+0x138/0x1f0 lib/refcount.c:22
Code: 06 31 ff 89 de e8 c8 f5 e6 fd 84 db 0f 85 6f ff ff ff e8 7b f4 e6 fd 48 c7 c7 e0 71 4f 88 c6 05 56 a6 a4 06 01 e8 c7 a8 b7 fd <0f> 0b e9 50 ff ff ff e8 5c f4 e6 fd 0f b6 1d 3d a6 a4 06 31 ff 89
RSP: 0018:ffff88809689f550 EFLAGS: 00010286
RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffffffff815e4336 RDI: ffffed1012d13e9c
RBP: ffff88809689f560 R08: ffff88809c50a3c0 R09: fffffbfff15d31b1
R10: fffffbfff15d31b0 R11: ffffffff8ae98d87 R12: 0000000000000001
R13: 0000000000040100 R14: ffff888099041104 R15: ffff888218d96e40
 refcount_add include/linux/refcount.h:193 [inline]
 skb_set_owner_w+0x2b6/0x410 net/core/sock.c:1999
 sock_wmalloc+0xf1/0x120 net/core/sock.c:2096
 ip_append_page+0x7ef/0x1190 net/ipv4/ip_output.c:1383
 udp_sendpage+0x1c7/0x480 net/ipv4/udp.c:1276
 inet_sendpage+0xdb/0x150 net/ipv4/af_inet.c:821
 kernel_sendpage+0x92/0xf0 net/socket.c:3794
 sock_sendpage+0x8b/0xc0 net/socket.c:936
 pipe_to_sendpage+0x2da/0x3c0 fs/splice.c:458
 splice_from_pipe_feed fs/splice.c:512 [inline]
 __splice_from_pipe+0x3ee/0x7c0 fs/splice.c:636
 splice_from_pipe+0x108/0x170 fs/splice.c:671
 generic_splice_sendpage+0x3c/0x50 fs/splice.c:842
 do_splice_from fs/splice.c:861 [inline]
 direct_splice_actor+0x123/0x190 fs/splice.c:1035
 splice_direct_to_actor+0x3b4/0xa30 fs/splice.c:990
 do_splice_direct+0x1da/0x2a0 fs/splice.c:1078
 do_sendfile+0x597/0xd00 fs/read_write.c:1464
 __do_sys_sendfile64 fs/read_write.c:1525 [inline]
 __se_sys_sendfile64 fs/read_write.c:1511 [inline]
 __x64_sys_sendfile64+0x1dd/0x220 fs/read_write.c:1511
 do_syscall_64+0xfa/0x790 arch/x86/entry/common.c:294
 entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x441409
Code: e8 ac e8 ff ff 48 83 c4 18 c3 0f 1f 80 00 00 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 eb 08 fc ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007fffb64c4f78 EFLAGS: 00000246 ORIG_RAX: 0000000000000028
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 0000000000441409
RDX: 0000000000000000 RSI: 0000000000000006 RDI: 0000000000000005
RBP: 0000000000073b8a R08: 0000000000000010 R09: 0000000000000010
R10: 0000000000010001 R11: 0000000000000246 R12: 0000000000402180
R13: 0000000000402210 R14: 0000000000000000 R15: 0000000000000000
Kernel Offset: disabled
Rebooting in 86400 seconds..

Fixes: 1470ddf7f8ce ("inet: Remove explicit write references to sk/inet in ip_append_data")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tipc: fix ordering of tipc module init and exit routine

[ Upstream commit 9cf1cd8ee3ee09ef2859017df2058e2f53c5347f ]

In order to set/get/dump, the tipc uses the generic netlink
infrastructure. So, when tipc module is inserted, init function
calls genl_register_family().
After genl_register_family(), set/get/dump commands are immediately
allowed and these callbacks internally use the net_generic.
net_generic is allocated by register_pernet_device() but this
is called after genl_register_family() in the __init function.
So, these callbacks would use un-initialized net_generic.

Test commands:
    #SHELL1
    while :
    do
        modprobe tipc
        modprobe -rv tipc
    done

    #SHELL2
    while :
    do
        tipc link list
    done

Splat looks like:
[   59.616322][ T2788] kasan: CONFIG_KASAN_INLINE enabled
[   59.617234][ T2788] kasan: GPF could be caused by NULL-ptr deref or user memory access
[   59.618398][ T2788] general protection fault: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN PTI
[   59.619389][ T2788] CPU: 3 PID: 2788 Comm: tipc Not tainted 5.4.0+ #194
[   59.620231][ T2788] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
[   59.621428][ T2788] RIP: 0010:tipc_bcast_get_broadcast_mode+0x131/0x310 [tipc]
[   59.622379][ T2788] Code: c7 c6 ef 8b 38 c0 65 ff 0d 84 83 c9 3f e8 d7 a5 f2 e3 48 8d bb 38 11 00 00 48 b8 00 00 00 00
[   59.622550][ T2780] NET: Registered protocol family 30
[   59.624627][ T2788] RSP: 0018:ffff88804b09f578 EFLAGS: 00010202
[   59.624630][ T2788] RAX: dffffc0000000000 RBX: 0000000000000011 RCX: 000000008bc66907
[   59.624631][ T2788] RDX: 0000000000000229 RSI: 000000004b3cf4cc RDI: 0000000000001149
[   59.624633][ T2788] RBP: ffff88804b09f588 R08: 0000000000000003 R09: fffffbfff4fb3df1
[   59.624635][ T2788] R10: fffffbfff50318f8 R11: ffff888066cadc18 R12: ffffffffa6cc2f40
[   59.624637][ T2788] R13: 1ffff11009613eba R14: ffff8880662e9328 R15: ffff8880662e9328
[   59.624639][ T2788] FS:  00007f57d8f7b740(0000) GS:ffff88806cc00000(0000) knlGS:0000000000000000
[   59.624645][ T2788] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   59.625875][ T2780] tipc: Started in single node mode
[   59.626128][ T2788] CR2: 00007f57d887a8c0 CR3: 000000004b140002 CR4: 00000000000606e0
[   59.633991][ T2788] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[   59.635195][ T2788] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[   59.636478][ T2788] Call Trace:
[   59.637025][ T2788]  tipc_nl_add_bc_link+0x179/0x1470 [tipc]
[   59.638219][ T2788]  ? lock_downgrade+0x6e0/0x6e0
[   59.638923][ T2788]  ? __tipc_nl_add_link+0xf90/0xf90 [tipc]
[   59.639533][ T2788]  ? tipc_nl_node_dump_link+0x318/0xa50 [tipc]
[   59.640160][ T2788]  ? mutex_lock_io_nested+0x1380/0x1380
[   59.640746][ T2788]  tipc_nl_node_dump_link+0x4fd/0xa50 [tipc]
[   59.641356][ T2788]  ? tipc_nl_node_reset_link_stats+0x340/0x340 [tipc]
[   59.642088][ T2788]  ? __skb_ext_del+0x270/0x270
[   59.642594][ T2788]  genl_lock_dumpit+0x85/0xb0
[   59.643050][ T2788]  netlink_dump+0x49c/0xed0
[   59.643529][ T2788]  ? __netlink_sendskb+0xc0/0xc0
[   59.644044][ T2788]  ? __netlink_dump_start+0x190/0x800
[   59.644617][ T2788]  ? __mutex_unlock_slowpath+0xd0/0x670
[   59.645177][ T2788]  __netlink_dump_start+0x5a0/0x800
[   59.645692][ T2788]  genl_rcv_msg+0xa75/0xe90
[   59.646144][ T2788]  ? __lock_acquire+0xdfe/0x3de0
[   59.646692][ T2788]  ? genl_family_rcv_msg_attrs_parse+0x320/0x320
[   59.647340][ T2788]  ? genl_lock_dumpit+0xb0/0xb0
[   59.647821][ T2788]  ? genl_unlock+0x20/0x20
[   59.648290][ T2788]  ? genl_parallel_done+0xe0/0xe0
[   59.648787][ T2788]  ? find_held_lock+0x39/0x1d0
[   59.649276][ T2788]  ? genl_rcv+0x15/0x40
[   59.649722][ T2788]  ? lock_contended+0xcd0/0xcd0
[   59.650296][ T2788]  netlink_rcv_skb+0x121/0x350
[   59.650828][ T2788]  ? genl_family_rcv_msg_attrs_parse+0x320/0x320
[   59.651491][ T2788]  ? netlink_ack+0x940/0x940
[   59.651953][ T2788]  ? lock_acquire+0x164/0x3b0
[   59.652449][ T2788]  genl_rcv+0x24/0x40
[   59.652841][ T2788]  netlink_unicast+0x421/0x600
[ ... ]

Fixes: 7e4369057806 ("tipc: fix a slab object leak")
Fixes: a62fbccecd62 ("tipc: make subscriber server support net namespace")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Acked-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tcp: md5: fix potential overestimation of TCP option space

[ Upstream commit 9424e2e7ad93ffffa88f882c9bc5023570904b55 ]

Back in 2008, Adam Langley fixed the corner case of packets for flows
having all of the following options : MD5 TS SACK

Since MD5 needs 20 bytes, and TS needs 12 bytes, no sack block
can be cooked from the remaining 8 bytes.

tcp_established_options() correctly sets opts->num_sack_blocks
to zero, but returns 36 instead of 32.

This means TCP cooks packets with 4 extra bytes at the end
of options, containing unitialized bytes.

Fixes: 33ad798c924b ("tcp: options clean up")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

openvswitch: support asymmetric conntrack

[ Upstream commit 5d50aa83e2c8e91ced2cca77c198b468ca9210f4 ]

The openvswitch module shares a common conntrack and NAT infrastructure
exposed via netfilter.  It's possible that a packet needs both SNAT and
DNAT manipulation, due to e.g. tuple collision.  Netfilter can support
this because it runs through the NAT table twice - once on ingress and
again after egress.  The openvswitch module doesn't have such capability.

Like netfilter hook infrastructure, we should run through NAT twice to
keep the symmetry.

Fixes: 05752523e565 ("openvswitch: Interface with NAT.")
Signed-off-by: Aaron Conole <aconole@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: ethernet: ti: cpsw: fix extra rx interrupt

[ Upstream commit 51302f77bedab8768b761ed1899c08f89af9e4e2 ]

Now RX interrupt is triggered twice every time, because in
cpsw_rx_interrupt() it is asked first and then disabled. So there will be
pending interrupt always, when RX interrupt is enabled again in NAPI
handler.

Fix it by first disabling IRQ and then do ask.

Fixes: 870915feabdc ("drivers: net: cpsw: remove disable_irq/enable_irq as irq can be masked from cpsw itself")
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: bridge: deny dev_set_mac_address() when unregistering

[ Upstream commit c4b4c421857dc7b1cf0dccbd738472360ff2cd70 ]

We have an interesting memory leak in the bridge when it is being
unregistered and is a slave to a master device which would change the
mac of its slaves on unregister (e.g. bond, team). This is a very
unusual setup but we do end up leaking 1 fdb entry because
dev_set_mac_address() would cause the bridge to insert the new mac address
into its table after all fdbs are flushed, i.e. after dellink() on the
bridge has finished and we call NETDEV_UNREGISTER the bond/team would
release it and will call dev_set_mac_address() to restore its original
address and that in turn will add an fdb in the bridge.
One fix is to check for the bridge dev's reg_state in its
ndo_set_mac_address callback and return an error if the bridge is not in
NETREG_REGISTERED.

Easy steps to reproduce:
 1. add bond in mode != A/B
 2. add any slave to the bond
 3. add bridge dev as a slave to the bond
 4. destroy the bridge device

Trace:
 unreferenced object 0xffff888035c4d080 (size 128):
   comm "ip", pid 4068, jiffies 4296209429 (age 1413.753s)
   hex dump (first 32 bytes):
     41 1d c9 36 80 88 ff ff 00 00 00 00 00 00 00 00  A..6............
     d2 19 c9 5e 3f d7 00 00 00 00 00 00 00 00 00 00  ...^?...........
   backtrace:
     [<00000000ddb525dc>] kmem_cache_alloc+0x155/0x26f
     [<00000000633ff1e0>] fdb_create+0x21/0x486 [bridge]
     [<0000000092b17e9c>] fdb_insert+0x91/0xdc [bridge]
     [<00000000f2a0f0ff>] br_fdb_change_mac_address+0xb3/0x175 [bridge]
     [<000000001de02dbd>] br_stp_change_bridge_id+0xf/0xff [bridge]
     [<00000000ac0e32b1>] br_set_mac_address+0x76/0x99 [bridge]
     [<000000006846a77f>] dev_set_mac_address+0x63/0x9b
     [<00000000d30738fc>] __bond_release_one+0x3f6/0x455 [bonding]
     [<00000000fc7ec01d>] bond_netdev_event+0x2f2/0x400 [bonding]
     [<00000000305d7795>] notifier_call_chain+0x38/0x56
     [<0000000028885d4a>] call_netdevice_notifiers+0x1e/0x23
     [<000000008279477b>] rollback_registered_many+0x353/0x6a4
     [<0000000018ef753a>] unregister_netdevice_many+0x17/0x6f
     [<00000000ba854b7a>] rtnl_delete_link+0x3c/0x43
     [<00000000adf8618d>] rtnl_dellink+0x1dc/0x20a
     [<000000009b6395fd>] rtnetlink_rcv_msg+0x23d/0x268

Fixes: 43598813386f ("bridge: add local MAC address to forwarding table (v2)")
Reported-by: syzbot+2add91c08eb181fea1bf@syzkaller.appspotmail.com
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nvme: host: core: fix precedence of ternary operator

commit e9a9853c23c13a37546397b61b270999fd0fb759 upstream.

Ternary operator have lower precedence then bitwise or, so 'cdw10' was
calculated wrong.

Signed-off-by: Ivan Bornyakov <brnkv.i1@gmail.com>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

kernel/module.c: wakeup processes in module_wq on module unload

[ Upstream commit 5d603311615f612320bb77bd2a82553ef1ced5b7 ]

Fix the race between load and unload a kernel module.

sys_delete_module()
 try_stop_module()
  mod->state = _GOING
add_unformed_module()
 old = find_module_all()
 (old->state == _GOING =>
  wait_event_interruptible())

 During pre-condition
 finished_loading() rets 0
 schedule()
 (never gets waken up later)
 free_module()
  mod->state = _UNFORMED
   list_del_rcu(&mod->list)
   (dels mod from "modules" list)

return

The race above leads to modprobe hanging forever on loading
a module.

Error paths on loading module call wake_up_all(&module_wq) after
freeing module, so let's do the same on straight module unload.

Fixes: 6e6de3dee51a ("kernel/module.c: Only return -EEXIST for modules that have finished loading")
Reviewed-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Konstantin Khorenko <khorenko@virtuozzo.com>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/mlx5e: Fix SFF 8472 eeprom length

[ Upstream commit c431f8597863a91eea6024926e0c1b179cfa4852 ]

SFF 8472 eeprom length is 512 bytes. Fix module info return value to
support 512 bytes read.

Fixes: ace329f4ab3b ("net/mlx5e: ethtool, Remove unsupported SFP EEPROM high pages query")
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Reviewed-by: Aya Levin <ayal@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

sunrpc: fix crash when cache_head become valid before update

[ Upstream commit 5fcaf6982d1167f1cd9b264704f6d1ef4c505d54 ]

I was investigating a crash in our Virtuozzo7 kernel which happened in
in svcauth_unix_set_client. I found out that we access m_client field
in ip_map structure, which was received from sunrpc_cache_lookup (we
have a bit older kernel, now the code is in sunrpc_cache_add_entry), and
these field looks uninitialized (m_client == 0x74 don't look like a
pointer) but in the cache_head in flags we see 0x1 which is CACHE_VALID.

It looks like the problem appeared from our previous fix to sunrpc (1):
commit 4ecd55ea0742 ("sunrpc: fix cache_head leak due to queued
request")

And we've also found a patch already fixing our patch (2):
commit d58431eacb22 ("sunrpc: don't mark uninitialised items as VALID.")

Though the crash is eliminated, I think the core of the problem is not
completely fixed:

Neil in the patch (2) makes cache_head CACHE_NEGATIVE, before
cache_fresh_locked which was added in (1) to fix crash. These way
cache_is_valid won't say the cache is valid anymore and in
svcauth_unix_set_client the function cache_check will return error
instead of 0, and we don't count entry as initialized.

But it looks like we need to remove cache_fresh_locked completely in
sunrpc_cache_lookup:

In (1) we've only wanted to make cache_fresh_unlocked->cache_dequeue so
that cache_requests with no readers also release corresponding
cache_head, to fix their leak.  We with Vasily were not sure if
cache_fresh_locked and cache_fresh_unlocked should be used in pair or
not, so we've guessed to use them in pair.

Now we see that we don't want the CACHE_VALID bit set here by
cache_fresh_locked, as "valid" means "initialized" and there is no
initialization in sunrpc_cache_add_entry. Both expiry_time and
last_refresh are not used in cache_fresh_unlocked code-path and also not
required for the initial fix.

So to conclude cache_fresh_locked was called by mistake, and we can just
safely remove it instead of crutching it with CACHE_NEGATIVE. It looks
ideologically better for me. Hope I don't miss something here.

Here is our crash backtrace:
[13108726.326291] BUG: unable to handle kernel NULL pointer dereference at 0000000000000074
[13108726.326365] IP: [<ffffffffc01f79eb>] svcauth_unix_set_client+0x2ab/0x520 [sunrpc]
[13108726.326448] PGD 0
[13108726.326468] Oops: 0002 [#1] SMP
[13108726.326497] Modules linked in: nbd isofs xfs loop kpatch_cumulative_81_0_r1(O) xt_physdev nfnetlink_queue bluetooth rfkill ip6table_nat nf_nat_ipv6 ip_vs_wrr ip_vs_wlc ip_vs_sh nf_conntrack_netlink ip_vs_sed ip_vs_pe_sip nf_conntrack_sip ip_vs_nq ip_vs_lc ip_vs_lblcr ip_vs_lblc ip_vs_ftp ip_vs_dh nf_nat_ftp nf_conntrack_ftp iptable_raw xt_recent nf_log_ipv6 xt_hl ip6t_rt nf_log_ipv4 nf_log_common xt_LOG xt_limit xt_TCPMSS xt_tcpmss vxlan ip6_udp_tunnel udp_tunnel xt_statistic xt_NFLOG nfnetlink_log dummy xt_mark xt_REDIRECT nf_nat_redirect raw_diag udp_diag tcp_diag inet_diag netlink_diag af_packet_diag unix_diag rpcsec_gss_krb5 xt_addrtype ip6t_rpfilter ipt_REJECT nf_reject_ipv4 ip6t_REJECT nf_reject_ipv6 ebtable_nat ebtable_broute nf_conntrack_ipv6 nf_defrag_ipv6 ip6table_mangle ip6table_raw nfsv4
[13108726.327173]  dns_resolver cls_u32 binfmt_misc arptable_filter arp_tables ip6table_filter ip6_tables devlink fuse_kio_pcs ipt_MASQUERADE nf_nat_masquerade_ipv4 xt_nat iptable_nat nf_nat_ipv4 xt_comment nf_conntrack_ipv4 nf_defrag_ipv4 xt_wdog_tmo xt_multiport bonding xt_set xt_conntrack iptable_filter iptable_mangle kpatch(O) ebtable_filter ebt_among ebtables ip_set_hash_ip ip_set nfnetlink vfat fat skx_edac intel_powerclamp coretemp intel_rapl iosf_mbi kvm_intel kvm irqbypass fuse pcspkr ses enclosure joydev sg mei_me hpwdt hpilo lpc_ich mei ipmi_si shpchp ipmi_devintf ipmi_msghandler xt_ipvs acpi_power_meter ip_vs_rr nfsv3 nfsd auth_rpcgss nfs_acl nfs lockd grace fscache nf_nat cls_fw sch_htb sch_cbq sch_sfq ip_vs em_u32 nf_conntrack tun br_netfilter veth overlay ip6_vzprivnet ip6_vznetstat ip_vznetstat
[13108726.327817]  ip_vzprivnet vziolimit vzevent vzlist vzstat vznetstat vznetdev vzmon vzdev bridge pio_kaio pio_nfs pio_direct pfmt_raw pfmt_ploop1 ploop ip_tables ext4 mbcache jbd2 sd_mod crc_t10dif crct10dif_generic mgag200 i2c_algo_bit drm_kms_helper scsi_transport_iscsi 8021q syscopyarea sysfillrect garp sysimgblt fb_sys_fops mrp stp ttm llc bnx2x crct10dif_pclmul crct10dif_common crc32_pclmul crc32c_intel drm dm_multipath ghash_clmulni_intel uas aesni_intel lrw gf128mul glue_helper ablk_helper cryptd tg3 smartpqi scsi_transport_sas mdio libcrc32c i2c_core usb_storage ptp pps_core wmi sunrpc dm_mirror dm_region_hash dm_log dm_mod [last unloaded: kpatch_cumulative_82_0_r1]
[13108726.328403] CPU: 35 PID: 63742 Comm: nfsd ve: 51332 Kdump: loaded Tainted: G        W  O   ------------   3.10.0-862.20.2.vz7.73.29 #1 73.29
[13108726.328491] Hardware name: HPE ProLiant DL360 Gen10/ProLiant DL360 Gen10, BIOS U32 10/02/2018
[13108726.328554] task: ffffa0a6a41b1160 ti: ffffa0c2a74bc000 task.ti: ffffa0c2a74bc000
[13108726.328610] RIP: 0010:[<ffffffffc01f79eb>]  [<ffffffffc01f79eb>] svcauth_unix_set_client+0x2ab/0x520 [sunrpc]
[13108726.328706] RSP: 0018:ffffa0c2a74bfd80  EFLAGS: 00010246
[13108726.328750] RAX: 0000000000000001 RBX: ffffa0a6183ae000 RCX: 0000000000000000
[13108726.328811] RDX: 0000000000000074 RSI: 0000000000000286 RDI: ffffa0c2a74bfcf0
[13108726.328864] RBP: ffffa0c2a74bfe00 R08: ffffa0bab8c22960 R09: 0000000000000001
[13108726.328916] R10: 0000000000000001 R11: 0000000000000001 R12: ffffa0a32aa7f000
[13108726.328969] R13: ffffa0a6183afac0 R14: ffffa0c233d88d00 R15: ffffa0c2a74bfdb4
[13108726.329022] FS:  0000000000000000(0000) GS:ffffa0e17f9c0000(0000) knlGS:0000000000000000
[13108726.329081] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[13108726.332311] CR2: 0000000000000074 CR3: 00000026a1b28000 CR4: 00000000007607e0
[13108726.334606] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[13108726.336754] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[13108726.338908] PKRU: 00000000
[13108726.341047] Call Trace:
[13108726.343074]  [<ffffffff8a2c78b4>] ? groups_alloc+0x34/0x110
[13108726.344837]  [<ffffffffc01f5eb4>] svc_set_client+0x24/0x30 [sunrpc]
[13108726.346631]  [<ffffffffc01f2ac1>] svc_process_common+0x241/0x710 [sunrpc]
[13108726.348332]  [<ffffffffc01f3093>] svc_process+0x103/0x190 [sunrpc]
[13108726.350016]  [<ffffffffc07d605f>] nfsd+0xdf/0x150 [nfsd]
[13108726.351735]  [<ffffffffc07d5f80>] ? nfsd_destroy+0x80/0x80 [nfsd]
[13108726.353459]  [<ffffffff8a2bf741>] kthread+0xd1/0xe0
[13108726.355195]  [<ffffffff8a2bf670>] ? create_kthread+0x60/0x60
[13108726.356896]  [<ffffffff8a9556dd>] ret_from_fork_nospec_begin+0x7/0x21
[13108726.358577]  [<ffffffff8a2bf670>] ? create_kthread+0x60/0x60
[13108726.360240] Code: 4c 8b 45 98 0f 8e 2e 01 00 00 83 f8 fe 0f 84 76 fe ff ff 85 c0 0f 85 2b 01 00 00 49 8b 50 40 b8 01 00 00 00 48 89 93 d0 1a 00 00 <f0> 0f c1 02 83 c0 01 83 f8 01 0f 8e 53 02 00 00 49 8b 44 24 38
[13108726.363769] RIP  [<ffffffffc01f79eb>] svcauth_unix_set_client+0x2ab/0x520 [sunrpc]
[13108726.365530]  RSP <ffffa0c2a74bfd80>
[13108726.367179] CR2: 0000000000000074

Fixes: d58431eacb22 ("sunrpc: don't mark uninitialised items as VALID.")
Signed-off-by: Pavel Tikhomirov <ptikhomirov@virtuozzo.com>
Acked-by: NeilBrown <neilb@suse.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

workqueue: Fix missing kfree(rescuer) in destroy_workqueue()

commit 8efe1223d73c218ce7e8b2e0e9aadb974b582d7f upstream.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Qian Cai <cai@lca.pw>
Fixes: def98c84b6cd ("workqueue: Fix spurious sanity check failures in destroy_workqueue()")
Cc: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

blk-mq: make sure that line break can be printed

commit d2c9be89f8ebe7ebcc97676ac40f8dec1cf9b43a upstream.

8962842ca5ab ("blk-mq: avoid sysfs buffer overflow with too many CPU cores")
avoids sysfs buffer overflow, and reserves one character for line break.
However, the last snprintf() doesn't get correct 'size' parameter passed
in, so fixed it.

Fixes: 8962842ca5ab ("blk-mq: avoid sysfs buffer overflow with too many CPU cores")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Cc: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: fix a bug in ext4_wait_for_tail_page_commit

commit 565333a1554d704789e74205989305c811fd9c7a upstream.

No need to wait for any commit once the page is fully truncated.
Besides, it may confuse e.g. concurrent ext4_writepage() with the page
still be dirty (will be cleared by truncate_pagecache() in
ext4_setattr()) but buffers has been freed; and then trigger a bug
show as below:

[   26.057508] ------------[ cut here ]------------
[   26.058531] kernel BUG at fs/ext4/inode.c:2134!
...
[   26.088130] Call trace:
[   26.088695]  ext4_writepage+0x914/0xb28
[   26.089541]  writeout.isra.4+0x1b4/0x2b8
[   26.090409]  move_to_new_page+0x3b0/0x568
[   26.091338]  __unmap_and_move+0x648/0x988
[   26.092241]  unmap_and_move+0x48c/0xbb8
[   26.093096]  migrate_pages+0x220/0xb28
[   26.093945]  kernel_mbind+0x828/0xa18
[   26.094791]  __arm64_sys_mbind+0xc8/0x138
[   26.095716]  el0_svc_common+0x190/0x490
[   26.096571]  el0_svc_handler+0x60/0xd0
[   26.097423]  el0_svc+0x8/0xc

Run the procedure (generate by syzkaller) parallel with ext3.

void main()
{
int fd, fd1, ret;
void *addr;
size_t length = 4096;
int flags;
off_t offset = 0;
char *str = "12345";

fd = open("a", O_RDWR | O_CREAT);
assert(fd >= 0);

/* Truncate to 4k */
ret = ftruncate(fd, length);
assert(ret == 0);

/* Journal data mode */
flags = 0xc00f;
ret = ioctl(fd, _IOW('f', 2, long), &flags);
assert(ret == 0);

/* Truncate to 0 */
fd1 = open("a", O_TRUNC | O_NOATIME);
assert(fd1 >= 0);

addr = mmap(NULL, length, PROT_WRITE | PROT_READ,
MAP_SHARED, fd, offset);
assert(addr != (void *)-1);

memcpy(addr, str, 5);
mbind(addr, length, 0, 0, 0, MPOL_MF_MOVE);
}

And the bug will be triggered once we seen the below order.

reproduce1                         reproduce2

...                            |   ...
truncate to 4k                 |
change to journal data mode    |
                               |   memcpy(set page dirty)
truncate to 0:                 |
ext4_setattr:                  |
...                            |
ext4_wait_for_tail_page_commit |
                               |   mbind(trigger bug)
truncate_pagecache(clean dirty)|   ...
...                            |

mbind will call ext4_writepage() since the page still be dirty, and then
report the bug since the buffers has been free. Fix it by return
directly once offset equals to 0 which means the page has been fully
truncated.

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: yangerkun <yangerkun@huawei.com>
Link: https://lore.kernel.org/r/20190919063508.1045-1-yangerkun@huawei.com
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm/shmem.c: cast the type of unmap_start to u64

commit aa71ecd8d86500da6081a72da6b0b524007e0627 upstream.

In 64bit system. sb->s_maxbytes of shmem filesystem is MAX_LFS_FILESIZE,
which equal LLONG_MAX.

If offset > LLONG_MAX - PAGE_SIZE, offset + len < LLONG_MAX in
shmem_fallocate, which will pass the checking in vfs_fallocate.

/* Check for wrap through zero too */
if (((offset + len) > inode->i_sb->s_maxbytes) || ((offset + len) < 0))
return -EFBIG;

loff_t unmap_start = round_up(offset, PAGE_SIZE) in shmem_fallocate
causes a overflow.

Syzkaller reports a overflow problem in mm/shmem:

  UBSAN: Undefined behaviour in mm/shmem.c:2014:10
  signed integer overflow: '9223372036854775807 + 1' cannot be represented in type 'long long int'
  CPU: 0 PID:17076 Comm: syz-executor0 Not tainted 4.1.46+ #1
  Hardware name: linux, dummy-virt (DT)
  Call trace:
     dump_backtrace+0x0/0x2c8 arch/arm64/kernel/traps.c:100
     show_stack+0x20/0x30 arch/arm64/kernel/traps.c:238
     __dump_stack lib/dump_stack.c:15 [inline]
     ubsan_epilogue+0x18/0x70 lib/ubsan.c:164
     handle_overflow+0x158/0x1b0 lib/ubsan.c:195
     shmem_fallocate+0x6d0/0x820 mm/shmem.c:2104
     vfs_fallocate+0x238/0x428 fs/open.c:312
     SYSC_fallocate fs/open.c:335 [inline]
     SyS_fallocate+0x54/0xc8 fs/open.c:239

The highest bit of unmap_start will be appended with sign bit 1
(overflow) when calculate shmem_falloc.start:

    shmem_falloc.start = unmap_start >> PAGE_SHIFT.

Fix it by casting the type of unmap_start to u64, when right shifted.

This bug is found in LTS Linux 4.1.  It also seems to exist in mainline.

Link: http://lkml.kernel.org/r/1573867464-5107-1-git-send-email-chenjun102@huawei.com
Signed-off-by: Chen Jun <chenjun102@huawei.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Qian Cai <cai@lca.pw>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

firmware: qcom: scm: Ensure 'a0' status code is treated as signed

commit ff34f3cce278a0982a7b66b1afaed6295141b1fc upstream.

The 'a0' member of 'struct arm_smccc_res' is declared as 'unsigned long',
however the Qualcomm SCM firmware interface driver expects to receive
negative error codes via this field, so ensure that it's cast to 'long'
before comparing to see if it is less than 0.

Cc: <stable@vger.kernel.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

reiserfs: fix extended attributes on the root directory

[ Upstream commit 60e4cf67a582d64f07713eda5fcc8ccdaf7833e6 ]

Since commit d0a5b995a308 (vfs: Add IOP_XATTR inode operations flag)
extended attributes haven't worked on the root directory in reiserfs.

This is due to reiserfs conditionally setting the sb->s_xattrs handler
array depending on whether it located or create the internal privroot
directory.  It necessarily does this after the root inode is already
read in.  The IOP_XATTR flag is set during inode initialization, so
it never gets set on the root directory.

This commit unconditionally assigns sb->s_xattrs and clears IOP_XATTR on
internal inodes.  The old return values due to the conditional assignment
are handled via open_xa_root, which now returns EOPNOTSUPP as the VFS
would have done.

Link: https://lore.kernel.org/r/20191024143127.17509-1-jeffm@suse.com
CC: stable@vger.kernel.org
Fixes: d0a5b995a308 ("vfs: Add IOP_XATTR inode operations flag")
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc: Fix vDSO clock_getres()

[ Upstream commit 552263456215ada7ee8700ce022d12b0cffe4802 ]

clock_getres in the vDSO library has to preserve the same behaviour
of posix_get_hrtimer_res().

In particular, posix_get_hrtimer_res() does:
    sec = 0;
    ns = hrtimer_resolution;
and hrtimer_resolution depends on the enablement of the high
resolution timers that can happen either at compile or at run time.

Fix the powerpc vdso implementation of clock_getres keeping a copy of
hrtimer_resolution in vdso data and using that directly.

Fixes: a7f290dad32e ("[PATCH] powerpc: Merge vdso's and add vdso support to 32 bits kernel")
Cc: stable@vger.kernel.org
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Reviewed-by: Christophe Leroy <christophe.leroy@c-s.fr>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
[chleroy: changed CLOCK_REALTIME_RES to CLOCK_HRTIMER_RES]
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/a55eca3a5e85233838c2349783bcb5164dae1d09.1575273217.git.christophe.leroy@c-s.fr
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: qla2xxx: Always check the qla2x00_wait_for_hba_online() return value

[ Upstream commit e6803efae5acd109fad9f2f07dab674563441a53 ]

This patch fixes several Coverity complaints about not always checking
the qla2x00_wait_for_hba_online() return value.

Cc: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Tested-by: Himanshu Madhani <hmadhani@marvell.com>
Reviewed-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: qla2xxx: Fix qla24xx_process_bidir_cmd()

[ Upstream commit c29282c65d1cf54daeea63be46243d7f69d72f4d ]

Set the r??_data_len variables before using these instead of after.

This patch fixes the following Coverity complaint:

const: At condition req_data_len != rsp_data_len, the value of req_data_len
must be equal to 0.
const: At condition req_data_len != rsp_data_len, the value of rsp_data_len
must be equal to 0.
dead_error_condition: The condition req_data_len != rsp_data_len cannot be
true.

Cc: Himanshu Madhani <hmadhani@marvell.com>
Fixes: a9b6f722f62d ("[SCSI] qla2xxx: Implementation of bidirectional.") # v3.7.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Tested-by: Himanshu Madhani <hmadhani@marvell.com>
Reviewed-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: qla2xxx: Fix session lookup in qlt_abort_work()

[ Upstream commit ac452b8e79320c9e90c78edf32ba2d42431e4daf ]

Pass the correct session ID to find_sess_by_s_id() instead of passing an
uninitialized variable.

Cc: Himanshu Madhani <hmadhani@marvell.com>
Fixes: 2d70c103fd2a ("[SCSI] qla2xxx: Add LLD target-mode infrastructure for >= 24xx series") # v3.5.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Tested-by: Himanshu Madhani <hmadhani@marvell.com>
Reviewed-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: qla2xxx: Fix DMA unmap leak

[ Upstream commit 5d328de64d89400dcf9911125844d8adc0db697f ]

With debug kernel we see following wanings indicating memory leak.

[28809.523959] WARNING: CPU: 3 PID: 6790 at lib/dma-debug.c:978
dma_debug_device_change+0x166/0x1d0
[28809.523964] pci 0000:0c:00.6: DMA-API: device driver has pending DMA
allocations while released from device [count=5]
[28809.523964] One of leaked entries details: [device
address=0x00000002aefe4000] [size=8208 bytes] [mapped with DMA_BIDIRECTIONAL]
[mapped as coherent]

Fix this by unmapping DMA memory.

Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pinctrl: samsung: Fix device node refcount leaks in S3C64xx wakeup controller init

[ Upstream commit 7f028caadf6c37580d0f59c6c094ed09afc04062 ]

In s3c64xx_eint_eint0_init() the for_each_child_of_node() loop is used
with a break to find a matching child node.  Although each iteration of
for_each_child_of_node puts the previous node, but early exit from loop
misses it.  This leads to leak of device node.

Cc: <stable@vger.kernel.org>
Fixes: 61dd72613177 ("pinctrl: Add pinctrl-s3c64xx driver")
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: omap3-tao3530: Fix incorrect MMC card detection GPIO polarity

[ Upstream commit 287897f9aaa2ad1c923d9875914f57c4dc9159c8 ]

The MMC card detection GPIO polarity is active low on TAO3530, like in many
other similar boards. Now the card is not detected and it is unable to
mount rootfs from an SD card.

Fix this by using the correct polarity.

This incorrect polarity was defined already in the commit 30d95c6d7092
("ARM: dts: omap3: Add Technexion TAO3530 SOM omap3-tao3530.dtsi") in v3.18
kernel and later changed to use defined GPIO constants in v4.4 kernel by
the commit 3a637e008e54 ("ARM: dts: Use defined GPIO constants in flags
cell for OMAP2+ boards").

While the latter commit did not introduce the issue I'm marking it with
Fixes tag due the v4.4 kernels still being maintained.

Fixes: 3a637e008e54 ("ARM: dts: Use defined GPIO constants in flags cell for OMAP2+ boards")
Cc: linux-stable <stable@vger.kernel.org> # 4.4+
Signed-off-by: Jarkko Nikula <jarkko.nikula@bitmer.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ath10k: fix fw crash by moving chip reset after napi disabled

[ Upstream commit 08d80e4cd27ba19f9bee9e5f788f9a9fc440a22f ]

On SMP platform, when continuously running wifi up/down, the napi
poll can be scheduled during chip reset, which will call
ath10k_pci_has_fw_crashed() to check the fw status. But in the reset
period, the value from FW_INDICATOR_ADDRESS register will return
0xdeadbeef, which also be treated as fw crash. Fix the issue by
moving chip reset after napi disabled.

ath10k_pci 0000:01:00.0: firmware crashed! (guid 73b30611-5b1e-4bdd-90b4-64c81eb947b6)
ath10k_pci 0000:01:00.0: qca9984/qca9994 hw1.0 target 0x01000000 chip_id 0x00000000 sub 168c:cafe
ath10k_pci 0000:01:00.0: htt-ver 2.2 wmi-op 6 htt-op 4 cal otp max-sta 512 raw 0 hwcrypto 1
ath10k_pci 0000:01:00.0: failed to get memcpy hi address for firmware address 4: -16
ath10k_pci 0000:01:00.0: failed to read firmware dump area: -16
ath10k_pci 0000:01:00.0: Copy Engine register dump:
ath10k_pci 0000:01:00.0: [00]: 0x0004a000   0   0   0   0
ath10k_pci 0000:01:00.0: [01]: 0x0004a400   0   0   0   0
ath10k_pci 0000:01:00.0: [02]: 0x0004a800   0   0   0   0
ath10k_pci 0000:01:00.0: [03]: 0x0004ac00   0   0   0   0
ath10k_pci 0000:01:00.0: [04]: 0x0004b000   0   0   0   0
ath10k_pci 0000:01:00.0: [05]: 0x0004b400   0   0   0   0
ath10k_pci 0000:01:00.0: [06]: 0x0004b800   0   0   0   0
ath10k_pci 0000:01:00.0: [07]: 0x0004bc00   1   0   1   0
ath10k_pci 0000:01:00.0: [08]: 0x0004c000   0   0   0   0
ath10k_pci 0000:01:00.0: [09]: 0x0004c400   0   0   0   0
ath10k_pci 0000:01:00.0: [10]: 0x0004c800   0   0   0   0
ath10k_pci 0000:01:00.0: [11]: 0x0004cc00   0   0   0   0

Tested HW: QCA9984,QCA9887,WCN3990

Signed-off-by: Miaoqing Pan <miaoqing@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

x86/MCE/AMD: Carve out the MC4_MISC thresholding quirk

[ Upstream commit 30aa3d26edb0f3d7992757287eec0ca588a5c259 ]

The MC4_MISC thresholding quirk needs to be applied during S5 -> S0 and
S3 -> S0 state transitions, which follow different code paths. Carve it
out into a separate function and call it mce_amd_feature_init() where
the two code paths of the state transitions converge.

 [ bp: massage commit message and the carved out function. ]

Signed-off-by: Shirish S <shirish.s@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: Yazen Ghannam <yazen.ghannam@amd.com>
Cc: x86-ml <x86@kernel.org>
Link: https://lkml.kernel.org/r/1547651417-23583-3-git-send-email-shirish.s@amd.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

x86/MCE/AMD: Turn off MC4_MISC thresholding on all family 0x15 models

[ Upstream commit c95b323dcd3598dd7ef5005d6723c1ba3b801093 ]

MC4_MISC thresholding is not supported on all family 0x15 processors,
hence skip the x86_model check when applying the quirk.

 [ bp: massage commit message. ]

Signed-off-by: Shirish S <shirish.s@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: x86-ml <x86@kernel.org>
Link: https://lkml.kernel.org/r/1547106849-3476-2-git-send-email-shirish.s@amd.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

e100: Fix passing zero to 'PTR_ERR' warning in e100_load_ucode_wait

[ Upstream commit cd0d465bb697a9c7bf66a9fe940f7981232f1676 ]

Fix a static code checker warning:
drivers/net/ethernet/intel/e100.c:1349
 e100_load_ucode_wait() warn: passing zero to 'PTR_ERR'

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: lpfc: Cap NPIV vports to 256

[ Upstream commit 8b47ae69e049ae0b3373859d901f0334322f9fe9 ]

Depending on the chipset, the number of NPIV vports may vary and be in
excess of what most switches support (256). To avoid confusion with the
users, limit the reported NPIV vports to 256.

Additionally correct the 16G adapter which is reporting a bogus NPIV vport
number if the link is down.

Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

omap: pdata-quirks: remove openpandora quirks for mmc3 and wl1251

[ Upstream commit 2398c41d64321e62af54424fd399964f3d48cdc2 ]

With a wl1251 child node of mmc3 in the device tree decoded
in omap_hsmmc.c to handle special wl1251 initialization, we do
no longer need to instantiate the mmc3 through pdata quirks.

We also can remove the wlan regulator and reset/interrupt definitions
and do them through device tree.

Fixes: 81eef6ca9201 ("mmc: omap_hsmmc: Use dma_request_chan() for requesting DMA channel")
Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Cc: <stable@vger.kernel.org> # v4.7+
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Btrfs: fix negative subv_writers counter and data space leak after buffered write

[ Upstream commit a0e248bb502d5165b3314ac3819e888fdcdf7d9f ]

When doing a buffered write it's possible to leave the subv_writers
counter of the root, used for synchronization between buffered nocow
writers and snapshotting. This happens in an exceptional case like the
following:

1) We fail to allocate data space for the write, since there's not
   enough available data space nor enough unallocated space for allocating
   a new data block group;

2) Because of that failure, we try to go to NOCOW mode, which succeeds
   and therefore we set the local variable 'only_release_metadata' to true
   and set the root's sub_writers counter to 1 through the call to
   btrfs_start_write_no_snapshotting() made by check_can_nocow();

3) The call to btrfs_copy_from_user() returns zero, which is very unlikely
   to happen but not impossible;

4) No pages are copied because btrfs_copy_from_user() returned zero;

5) We call btrfs_end_write_no_snapshotting() which decrements the root's
   subv_writers counter to 0;

6) We don't set 'only_release_metadata' back to 'false' because we do
   it only if 'copied', the value returned by btrfs_copy_from_user(), is
   greater than zero;

7) On the next iteration of the while loop, which processes the same
   page range, we are now able to allocate data space for the write (we
   got enough data space released in the meanwhile);

8) After this if we fail at btrfs_delalloc_reserve_metadata(), because
   now there isn't enough free metadata space, or in some other place
   further below (prepare_pages(), lock_and_cleanup_extent_if_need(),
   btrfs_dirty_pages()), we break out of the while loop with
   'only_release_metadata' having a value of 'true';

9) Because 'only_release_metadata' is 'true' we end up decrementing the
   root's subv_writers counter to -1 (through a call to
   btrfs_end_write_no_snapshotting()), and we also end up not releasing the
   data space previously reserved through btrfs_check_data_free_space().
   As a consequence the mechanism for synchronizing NOCOW buffered writes
   with snapshotting gets broken.

Fix this by always setting 'only_release_metadata' to false at the start
of each iteration.

Fixes: 8257b2dc3c1a ("Btrfs: introduce btrfs_{start, end}_nocow_write() for each subvolume")
Fixes: 7ee9e4405f26 ("Btrfs: check if we can nocow if we don't have data space")
CC: stable@vger.kernel.org # 4.4+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iio: adis16480: Add debugfs_reg_access entry

[ Upstream commit 4c35b7a51e2f291471f7221d112c6a45c63e83bc ]

The driver is defining debugfs entries by calling
`adis16480_debugfs_init()`. However, those entries are attached to the
iio_dev debugfs entry which won't exist if no debugfs_reg_access
callback is provided.

Fixes: 2f3abe6cbb6c ("iio:imu: Add support for the ADIS16480 and similar IMUs")
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

xhci: make sure interrupts are restored to correct state

[ Upstream commit bd82873f23c9a6ad834348f8b83f3b6a5bca2c65 ]

spin_unlock_irqrestore() might be called with stale flags after
reading port status, possibly restoring interrupts to a incorrect
state.

If a usb2 port just finished resuming while the port status is read
the spin lock will be temporary released and re-acquired in a separate
function. The flags parameter is passed as value instead of a pointer,
not updating flags properly before the final spin_unlock_irqrestore()
is called.

Cc: <stable@vger.kernel.org> # v3.12+
Fixes: 8b3d45705e54 ("usb: Fix xHCI host issues on remote wakeup.")
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20191211142007.8847-7-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

xhci: Fix memory leak in xhci_add_in_port()

[ Upstream commit ce91f1a43b37463f517155bdfbd525eb43adbd1a ]

When xHCI is part of Alpine or Titan Ridge Thunderbolt controller and
the xHCI device is hot-removed as a result of unplugging a dock for
example, the driver leaks memory it allocates for xhci->usb3_rhub.psi
and xhci->usb2_rhub.psi in xhci_add_in_port() as reported by kmemleak:

unreferenced object 0xffff922c24ef42f0 (size 16):
  comm "kworker/u16:2", pid 178, jiffies 4294711640 (age 956.620s)
  hex dump (first 16 bytes):
    21 00 0c 00 12 00 dc 05 23 00 e0 01 00 00 00 00  !.......#.......
  backtrace:
    [<000000007ac80914>] xhci_mem_init+0xcf8/0xeb7
    [<0000000001b6d775>] xhci_init+0x7c/0x160
    [<00000000db443fe3>] xhci_gen_setup+0x214/0x340
    [<00000000fdffd320>] xhci_pci_setup+0x48/0x110
    [<00000000541e1e03>] usb_add_hcd.cold+0x265/0x747
    [<00000000ca47a56b>] usb_hcd_pci_probe+0x219/0x3b4
    [<0000000021043861>] xhci_pci_probe+0x24/0x1c0
    [<00000000b9231f25>] local_pci_probe+0x3d/0x70
    [<000000006385c9d7>] pci_device_probe+0xd0/0x150
    [<0000000070241068>] really_probe+0xf5/0x3c0
    [<0000000061f35c0a>] driver_probe_device+0x58/0x100
    [<000000009da11198>] bus_for_each_drv+0x79/0xc0
    [<000000009ce45f69>] __device_attach+0xda/0x160
    [<00000000df201aaf>] pci_bus_add_device+0x46/0x70
    [<0000000088a1bc48>] pci_bus_add_devices+0x27/0x60
    [<00000000ad9ee708>] pci_bus_add_devices+0x52/0x60
unreferenced object 0xffff922c24ef3318 (size 8):
  comm "kworker/u16:2", pid 178, jiffies 4294711640 (age 956.620s)
  hex dump (first 8 bytes):
    34 01 05 00 35 41 0a 00                          4...5A..
  backtrace:
    [<000000007ac80914>] xhci_mem_init+0xcf8/0xeb7
    [<0000000001b6d775>] xhci_init+0x7c/0x160
    [<00000000db443fe3>] xhci_gen_setup+0x214/0x340
    [<00000000fdffd320>] xhci_pci_setup+0x48/0x110
    [<00000000541e1e03>] usb_add_hcd.cold+0x265/0x747
    [<00000000ca47a56b>] usb_hcd_pci_probe+0x219/0x3b4
    [<0000000021043861>] xhci_pci_probe+0x24/0x1c0
    [<00000000b9231f25>] local_pci_probe+0x3d/0x70
    [<000000006385c9d7>] pci_device_probe+0xd0/0x150
    [<0000000070241068>] really_probe+0xf5/0x3c0
    [<0000000061f35c0a>] driver_probe_device+0x58/0x100
    [<000000009da11198>] bus_for_each_drv+0x79/0xc0
    [<000000009ce45f69>] __device_attach+0xda/0x160
    [<00000000df201aaf>] pci_bus_add_device+0x46/0x70
    [<0000000088a1bc48>] pci_bus_add_devices+0x27/0x60
    [<00000000ad9ee708>] pci_bus_add_devices+0x52/0x60

Fix this by calling kfree() for the both psi objects in
xhci_mem_cleanup().

Cc: <stable@vger.kernel.org> # 4.4+
Fixes: 47189098f8be ("xhci: parse xhci protocol speed ID list for usb 3.1 usage")
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20191211142007.8847-2-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: xhci: only set D3hot for pci device

[ Upstream commit f2c710f7dca8457e88b4ac9de2060f011254f9dd ]

Xhci driver cannot call pci_set_power_state() on non-pci xhci host
controllers. For example, NVIDIA Tegra XHCI host controller which acts
as platform device with XHCI_SPURIOUS_WAKEUP quirk set in some platform
hits this issue during shutdown.

Cc: <stable@vger.kernel.org>
Fixes: 638298dc66ea ("xhci: Fix spurious wakeups after S5 on Haswell")
Signed-off-by: Henry Lin <henryl@nvidia.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20191211142007.8847-4-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: zfcp: trace channel log even for FCP command responses

[ Upstream commit 100843f176109af94600e500da0428e21030ca7f ]

While v2.6.26 commit b75db73159cc ("[SCSI] zfcp: Add qtcb dump to hba debug
trace") is right that we don't want to flood the (payload) trace ring
buffer, we don't trace successful FCP command responses by default.  So we
can include the channel log for problem determination with failed responses
of any FSF request type.

Fixes: b75db73159cc ("[SCSI] zfcp: Add qtcb dump to hba debug trace")
Fixes: a54ca0f62f95 ("[SCSI] zfcp: Redesign of the debug tracing for HBA records.")
Cc: <stable@vger.kernel.org> #2.6.38+
Link: https://lore.kernel.org/r/e37597b5c4ae123aaa85fd86c23a9f71e994e4a9.1572018132.git.bblock@linux.ibm.com
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

quota: fix livelock in dquot_writeback_dquots

commit 6ff33d99fc5c96797103b48b7b0902c296f09c05 upstream.

Write only quotas which are dirty at entry.

XFSTEST: https://github.com/dmonakhov/xfstests/commit/b10ad23566a5bf75832a6f500e1236084083cddc

Link: https://lore.kernel.org/r/20191031103920.3919-1-dmonakhov@openvz.org
CC: stable@vger.kernel.org
Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Signed-off-by: Dmitry Monakhov <dmtrmonakhov@yandex-team.ru>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext2: check err when partial != NULL

commit e705f4b8aa27a59f8933e8f384e9752f052c469c upstream.

Check err when partial == NULL is meaningless because
partial == NULL means getting branch successfully without
error.

CC: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20191105045100.7104-1-cgxu519@mykernel.net
Signed-off-by: Chengguang Xu <cgxu519@mykernel.net>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

quota: Check that quota is not dirty before release

commit df4bb5d128e2c44848aeb36b7ceceba3ac85080d upstream.

There is a race window where quota was redirted once we drop dq_list_lock inside dqput(),
but before we grab dquot->dq_lock inside dquot_release()

TASK1                                                       TASK2 (chowner)
->dqput()
  we_slept:
    spin_lock(&dq_list_lock)
    if (dquot_dirty(dquot)) {
          spin_unlock(&dq_list_lock);
          dquot->dq_sb->dq_op->write_dquot(dquot);
          goto we_slept
    if (test_bit(DQ_ACTIVE_B, &dquot->dq_flags)) {
          spin_unlock(&dq_list_lock);
          dquot->dq_sb->dq_op->release_dquot(dquot);
                                                            dqget()
    mark_dquot_dirty()
    dqput()
          goto we_slept;
        }
So dquot dirty quota will be released by TASK1, but on next we_sleept loop
we detect this and call ->write_dquot() for it.
XFSTEST: https://github.com/dmonakhov/xfstests/commit/440a80d4cbb39e9234df4d7240aee1d551c36107

Link: https://lore.kernel.org/r/20191031103920.3919-2-dmonakhov@openvz.org
CC: stable@vger.kernel.org
Signed-off-by: Dmitry Monakhov <dmtrmonakhov@yandex-team.ru>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

video/hdmi: Fix AVI bar unpack

commit 6039f37dd6b76641198e290f26b31c475248f567 upstream.

The bar values are little endian, not big endian. The pack
function did it right but the unpack got it wrong. Fix it.

Cc: stable@vger.kernel.org
Cc: linux-media@vger.kernel.org
Cc: Martin Bugge <marbugge@cisco.com>
Cc: Hans Verkuil <hans.verkuil@cisco.com>
Cc: Thierry Reding <treding@nvidia.com>
Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Fixes: 2c676f378edb ("[media] hdmi: added unpack and logging functions for InfoFrames")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190919132853.30954-1-ville.syrjala@linux.intel.com
Reviewed-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc: Allow 64bit VDSO __kernel_sync_dicache to work across ranges >4GB

commit f9ec11165301982585e5e5f606739b5bae5331f3 upstream.

When calling __kernel_sync_dicache with a size >4GB, we were masking
off the upper 32 bits, so we would incorrectly flush a range smaller
than intended.

This patch replaces the 32 bit shifts with 64 bit ones, so that
the full size is accounted for.

Signed-off-by: Alastair D'Silva <alastair@d-silva.org>
Cc: stable@vger.kernel.org
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191104023305.9581-3-alastair@au1.ibm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ppdev: fix PPGETTIME/PPSETTIME ioctls

commit 998174042da229e2cf5841f574aba4a743e69650 upstream.

Going through the uses of timeval in the user space API,
I noticed two bugs in ppdev that were introduced in the y2038
conversion:

* The range check was accidentally moved from ppsettime to
  ppgettime

* On sparc64, the microseconds are in the other half of the
  64-bit word.

Fix both, and mark the fix for stable backports.

Cc: stable@vger.kernel.org
Fixes: 3b9ab374a1e6 ("ppdev: convert to y2038 safe")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20191108203435.112759-8-arnd@arndb.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mmc: host: omap_hsmmc: add code for special init of wl1251 to get rid of pandora_wl1251_init_card

commit f6498b922e57aecbe3b7fa30a308d9d586c0c369 upstream.

Pandora_wl1251_init_card was used to do special pdata based
setup of the sdio mmc interface. This does no longer work with
v4.7 and later. A fix requires a device tree based mmc3 setup.

Therefore we move the special setup to omap_hsmmc.c instead
of calling some pdata supplied init_card function.

The new code checks for a DT child node compatible to wl1251
so it will not affect other MMC3 use cases.

Generally, this code was and still is a hack and should be
moved to mmc core to e.g. read such properties from optional
DT child nodes.

Fixes: 81eef6ca9201 ("mmc: omap_hsmmc: Use dma_request_chan() for requesting DMA channel")
Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Cc: <stable@vger.kernel.org> # v4.7+
[Ulf: Fixed up some checkpatch complaints]
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

pinctrl: samsung: Fix device node refcount leaks in init code

commit a322b3377f4bac32aa25fb1acb9e7afbbbbd0137 upstream.

Several functions use for_each_child_of_node() loop with a break to find
a matching child node.  Although each iteration of
for_each_child_of_node puts the previous node, but early exit from loop
misses it.  This leads to leak of device node.

Cc: <stable@vger.kernel.org>
Fixes: 9a2c1c3b91aa ("pinctrl: samsung: Allow grouping multiple pinmux/pinconf nodes")
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

pinctrl: samsung: Fix device node refcount leaks in S3C24xx wakeup controller init

commit 6fbbcb050802d6ea109f387e961b1dbcc3a80c96 upstream.

In s3c24xx_eint_init() the for_each_child_of_node() loop is used with a
break to find a matching child node.  Although each iteration of
for_each_child_of_node puts the previous node, but early exit from loop
misses it.  This leads to leak of device node.

Cc: <stable@vger.kernel.org>
Fixes: af99a7507469 ("pinctrl: Add pinctrl-s3c24xx driver")
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ACPI: PM: Avoid attaching ACPI PM domain to certain devices

commit b9ea0bae260f6aae546db224daa6ac1bd9d94b91 upstream.

Certain ACPI-enumerated devices represented as platform devices in
Linux, like fans, require special low-level power management handling
implemented by their drivers that is not in agreement with the ACPI
PM domain behavior.  That leads to problems with managing ACPI fans
during system-wide suspend and resume.

For this reason, make acpi_dev_pm_attach() skip the affected devices
by adding a list of device IDs to avoid to it and putting the IDs of
the affected devices into that list.

Fixes: e5cc8ef31267 (ACPI / PM: Provide ACPI PM callback routines for subsystems)
Reported-by: Zhang Rui <rui.zhang@intel.com>
Tested-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Cc: 3.10+ <stable@vger.kernel.org> # 3.10+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ACPI: bus: Fix NULL pointer check in acpi_bus_get_private_data()

commit 627ead724eff33673597216f5020b72118827de4 upstream.

kmemleak reported backtrace:
    [<bbee0454>] kmem_cache_alloc_trace+0x128/0x260
    [<6677f215>] i2c_acpi_install_space_handler+0x4b/0xe0
    [<1180f4fc>] i2c_register_adapter+0x186/0x400
    [<6083baf7>] i2c_add_adapter+0x4e/0x70
    [<a3ddf966>] intel_gmbus_setup+0x1a2/0x2c0 [i915]
    [<84cb69ae>] i915_driver_probe+0x8d8/0x13a0 [i915]
    [<81911d4b>] i915_pci_probe+0x48/0x160 [i915]
    [<4b159af1>] pci_device_probe+0xdc/0x160
    [<b3c64704>] really_probe+0x1ee/0x450
    [<bc029f5a>] driver_probe_device+0x142/0x1b0
    [<d8829d20>] device_driver_attach+0x49/0x50
    [<de71f045>] __driver_attach+0xc9/0x150
    [<df33ac83>] bus_for_each_dev+0x56/0xa0
    [<80089bba>] driver_attach+0x19/0x20
    [<cc73f583>] bus_add_driver+0x177/0x220
    [<7b29d8c7>] driver_register+0x56/0xf0

In i2c_acpi_remove_space_handler(), a leak occurs whenever the
"data" parameter is initialized to 0 before being passed to
acpi_bus_get_private_data().

This is because the NULL pointer check in acpi_bus_get_private_data()
(condition->if(!*data)) returns EINVAL and, in consequence, memory is
never freed in i2c_acpi_remove_space_handler().

Fix the NULL pointer check in acpi_bus_get_private_data() to follow
the analogous check in acpi_get_data_full().

Signed-off-by: Vamshi K Sthambamkadi <vamshi.k.sthambamkadi@gmail.com>
[ rjw: Subject & changelog ]
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ACPI: OSL: only free map once in osl.c

commit 833a426cc471b6088011b3d67f1dc4e147614647 upstream.

acpi_os_map_cleanup checks map->refcount outside of acpi_ioremap_lock
before freeing the map. This creates a race condition the can result
in the map being freed more than once.
A panic can be caused by running

for ((i=0; i<10; i++))
do
        for ((j=0; j<100000; j++))
        do
                cat /sys/firmware/acpi/tables/data/BERT >/dev/null
        done &
done

This patch makes sure that only the process that drops the reference
to 0 does the freeing.

Fixes: b7c1fadd6c2e ("ACPI: Do not use krefs under a mutex in osl.c")
Signed-off-by: Francesco Ruggeri <fruggeri@arista.com>
Reviewed-by: Dmitry Safonov <0x7f454c46@gmail.com>
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>