staging/rdma/hfi1: Fix counter read for cp

A cp or cat of /sys/kernel/debug/hfi1/hfi1_0/port1counters
produces the following message:

hfi1 0000:81:00.0: hfi1_0: index not supported
hfi1 0000:81:00.0: hfi1_0: read_cntrs does not support indexing

Fix by removing the file position logic and the associated messages
and make the file positioning the responsibility of the caller.

The port counter read function argument is changed to the per port
data structure since the counters are relative to the port and not
the device.

Reviewed-by: Sebastian Sanchez <sebastian.sanchez@intel.com>
Signed-off-by: Dean Luick <dean.luick@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

staging/rdma/hfi1: Guard i2c access against cp

An attempt to cp or cat /sys/kernel/debug/hfi1/hfi1_0/i2c1
produces this message:

hfi1 0000:81:00.0: hfi1_0: IB0:1 I2C failed even retrying

Fix the issue by explicitly rejecting a simple cat/cp with an
-EINVAL error return.

Reviewed-by: Easwar Hariharan <easwar.hariharan@intel.com>
Signed-off-by: Dean Luick <dean.luick@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/rdamvt: fix cross build with rdmavt

The new check routine causes a larger than supported frame size
on s390.

Changing the check routine to noinline fixes the issue.

Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

staging/rdma/hfi1: Disclose more information when i2c fails

Improve logging messages when there are i2c failures.
Clean i2c read error handling.

Reviewed-by: Easwar Hariharan <easwar.hariharan@intel.com>
Signed-off-by: Dean Luick <dean.luick@intel.com>
Signed-off-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

staging/rdma/hfi1: Fix debugfs access race

Debugfs access races with the driver being ready.  Make sure the
driver is ready before debugfs files appear and debufs files are
gone before the driver starts tearing down.

Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dean Luick <dean.luick@intel.com>
Signed-off-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

staging/rdma/hfi1: Cleanup comments and logs in PHY code

This is a set of minor fixes including comment and log message cleanups
and improvements to the PHY layer code.

Reviewed-by: Dean Luick <dean.luick@intel.com>
Signed-off-by: Easwar Hariharan <easwar.hariharan@intel.com>
Signed-off-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

staging/rdma/hfi1: Fix xmit discard error weight

Count only the errors that apply to xmit discards.  Update
the comment to better explain the limitations of the count.

Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Dean Luick <dean.luick@intel.com>
Signed-off-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

staging/rdma/hfi1: fix 0-day syntax error

Setting CONFIG_HFI1_DEBUG_SDMA_ORDER causes a syntax error:
sdma.c: In function ‘complete_tx’:
sdma.c:370: error: ‘txp’ undeclared (first use in
this function)
sdma.c:370: error: (Each undeclared identifier is reported only once
sdma.c:370: error: for each function it appears in.)

Adjust code under ifdef to reference the tx properly.

Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

staging/rdma/hfi1: Fix header

Fix the header by moving the copyright notice out of the license text
and to the top of the header. Also, update the copyright date.

Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

staging/rdma/hfi1: Remove else after break

Remove else after break to fix checkpatch warning:
WARNING: else is not generally useful after a break or return

Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

staging/rdma/hfi1: Add braces on all arms of statement

Add braces on all arms of statements to fix checkpatch check:
CHECK: braces {} should be used on all arms of this statement

Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

staging/rdma/hfi1: Fix code alignment

Fix code alignment to fix checkpatch check:
CHECK: Alignment should match open parenthesis

Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

staging/rdma/hfi1: Fix block comments

Fix block comments with proper formatting to fix checkpatch warnings:
WARNING: Block comments use * on subsequent lines
WARNING: Block comments use a trailing */ on a separate line

Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

staging/rdma/hfi1: Add comment for spinlock_t definition

Add comments describing the spinlock for spinlock_t definitions to
fix checkpatch check:
CHECK: spinlock_t definition without comment

Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

staging/rdma/hfi1: Remove void function return statement

Remove return statement at the end of a void function to fix
checkpatch warning:
WARNING: void function return statements are not generally useful

Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

staging/rdma/hfi1: Use pointer instead of struct name

Use sizeof(*p) instead of sizeof(struct foo) to fix checkpatch check:
CHECK: Prefer alloc(sizeof(*p)...) over alloc(sizeof(struct foo)...)

Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

staging/rdma/hfi1: Remove CamelCase

Remove CamelCase to fix checkpatch check:
CHECK: Avoid CamelCase: <PLS_CONFIGPHY_ESTcOMM_LOCAL_COMPLETE>

Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

staging/rdma/hfi1: Fix misspellings

Fix misspelled word based on checkpatch check:
CHECK: 'ffoo' may be misspelled - perhaps 'foo'?

Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

staging/rdma/hfi1: Split multiple assignments

Split multiple assignments into individual assignments to fix
checkpatch check:
CHECK: multiple assignments should be avoided

Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

staging/rdma/hfi1: Use BIT_ULL macro

Use BIT_ULL macro to fix checkpatch check:
CHECK: Prefer using the BIT_ULL macro

Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

staging/rdma/hfi1: Remove unnecessary parentheses

Remove unnecessary parentheses around addressof single $Lvals to fix
checkpatch check:
CHECK: Unnecessary parentheses around $var

Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

staging/rdma/hfi1: Add blank link after declarations

Add blank line after declarations to fix checkpatch check:
CHECK: Please use a blank line after function/struct/union/enum
declarations

Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

staging/rdma/hfi1: Fix logical continuations

Move logical continuations to previous line to fix checkpatch check:
CHECK: Logical continuations should be on the previous line

Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

staging/rdma/hfi1: Remove blank line before close brace

Remove extra blank line before close brace to fix checkpatch check:
CHECK: Blank lines aren't necessary before a close brace '}'

Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

staging/rdma/hfi1: Remove blank line after an open brace

Remove blank line after an open brace to fix checkpatch check:
CHECK: Blank lines aren't necessary after an open brace '{'

Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

staging/rdma/hfi1: Fix comparison to NULL

Convert pointer comparisons to NULL to !pointer
to fix checkpatch check:
CHECK: Comparison to NULL could be written "!pointer"

Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

staging/rdma/hfi1: Remove space after cast

Remove the space after a cast to fix checkpatch check:
CHECK: No space is necessary after a cast

Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

staging/rdma/hfi1: Remove multiple blank lines

Remove multiple blank lines to fix checkpatch check:
CHECK: Please don't use multiple blank lines

Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

staging/rdma/hfi1: Add spaces around binary operators

Add spaces around binary operators.

Fixes checkpatch check:
CHECK: spaces preferred around that 'x'
where x is a binary operator

Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

staging/rdma/hfi1: add cq head and tail information to qpstats

This enables debugging issues related to cq event signalling mechanism

Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Vennila Megavannan <vennila.megavannan@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

staging/rdma/hfi1: Add send context sw index

Print the qp's send context sw index in the qpstats

Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

staging/rdma/hfi1: Determine actual operational VLs

Use shared credits and dedicated credits for each VL to determine
the actual number of operational VLs.

Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

staging/rdma/hfi1: Add qp to send context mapping for PIO

PIO send context mapping is changed from per-VL to QPN based.

qp to send context mapping is done using a mapping infrastructure
similar to the current vl to sdma engine mapping.

Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

staging/rdma/hfi: fix CQ completion order issue

The current implementation of the sdma_wait variable
has a timing hole that can cause a completion Q entry
to be returned from a pio send prior to an older
sdma packets completion queue entry.

The sdma_wait variable used to be decremented prior to
calling the packet complete routine.  The hole is between decrement
and the verbs completion where send engine using pio could return
a out of order completion in that window.

This patch closes the hole by allowing an API option to
specify an sdma_drained callback.   The atomic dec
is positioned after the complete callback to avoid the
window as long as the pio path doesn't execute when
there is a non-zero sdma count.

Reviewed-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Dean Luick <dean.luick@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/qib, staging/rdma/hfi1, IB/rdmavt: progress selection changes

The non-rdamvt versions of qib and hfi1 allow for a differing
heuristic to override a schedule progress in favor of a direct
call the the progress routine.

This patch adds that for both drivers and rdmavt.

Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

staging/rdma/hfi1: Adaptive PIO for short messages

The change requires a new pio_busy field in the iowait structure to
track the number of outstanding pios.  The new counter together
with the sdma counter serve as the basis for a packet by packet decision
as to which egress mechanism to use.  Since packets given to different
egress mechanisms are not ordered, this scheme will preserve the order.

The iowait drain/wait mechanisms are extended for a pio case.  An
additional qp wait flag is added for the PIO drain wait case.

Currently the only pio wait is for buffers, so the no_bufs_available()
routine name is changed to pio_wait() and a third argument is passed
with one of the two pio wait flags to generalize the routine.  A module
parameter is added to hold a configurable threshold. For now, the
module parameter is zero.

A heuristic routine is added to return the func pointer of the proper
egress routine to use.

The heuristic is as follows:
- SMI always uses pio
- GSI,UD qps <= threshold use pio
- UD qps > threadhold use sdma
  o No coordination with sdma is required because order is not required
    and this qp pio count is not maintained for UD
- RC/UC ONLY packets <= threshold chose as follows:
  o If sdmas pending, use SDMA
  o Otherwise use pio and enable the pio tracking count at
    the time the pio buffer is allocated
- RC/UC ONLY packets > threshold use SDMA
  o If pio's are pending the pio_wait with the new wait flag is
    called to delay for pios to drain

The threshold is potentially reduced by the QP's mtu.

The sc_buffer_alloc() has two additional args (a callback, a void *)
which are exploited by the RC/UC cases to pass a new complete routine
and a qp *.

When the shadow ring completes the credit associated with a packet,
the new complete routine is called.  The verbs_pio_complete() will then
decrement the busy count and trigger any drain waiters in qp destroy
or reset.

Reviewed-by: Jubin John <jubin.john@intel.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

staging/rdma/hfi1: use u8 for vl/sl

The use should match the universal container size.

Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

staging/rdma/hfi1: fix panic in send engine

The send engine wasn't correctly handling
pre-built packets, and worse, the pointer to
a packet state's txreq wasn't initialized correctly.

To fix:
- all waiters need to save any prebuilt packets
  (smda waits already did)
- the progress routine needs to handle a QPs prebuilt packet
  and initialize the txreq pointer properly

To keep SDMA working, the dma send code needs to see if
a packet has been built already. If not the code will build
it.

Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

staging/rdma/hfi1: avoid passing pmtu

It is in the qp.

Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

staging/rdma/hfi1: Add s_sendcontext priv field

s_sendcontext will be used to map the QPs to the send contexts
for PIO.

Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

staging/rdma/hfi1: remove s_rdma_mr

It can be conveyed in the verbs_txreq.

Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

staging/rdma/hfi1: Remove header memcpy from sdma send path.

Instead of writing the header into a buffer then copying it into another
buffer to be sent, remove that memcpy and instead build the header directly
into the tx request that will be sent.

Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Vennila Megavannan <vennila.megavannan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

staging/rdma/hfi1: move txreq header code

The patch separates the txreq defines into new files, one for
verbs and one for sdma.

The verbs_txreq implementation handles the setup and teardown
of the txreq cache, so the register routine is changed to call
the new init/exit routines.

This patch allows for followup patches enhance the send engine.

Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/rdmvt: close send engine struct holes

pahole noted the wasted 4 bytes after s_lock and r_lock.

Move s_flags and r_psn to fill the holes.

Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

staging/rdma/hfi1: add s_avail to qp_stats

This diagnostic capability was missed in the dual lock series.

Signed-off-by: Vennila Megavannan <vennila.megavannan@intel.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/qib: Destroy SMI AH before de-allocating the protection domain

If SMI AH is not destroyed before de-allocating the PD, it would result in
non-zero PD use count when de-allocating the PD, triggering a WARN_ON() at
drivers/infiniband/core/verbs.c:284 ib_dealloc_pd+0x69/0xb0 [ib_core]()
when unloading the qib driver on systems with dual-port card.

This problem has always been there in qib and was detected only after the
commit 7dd78647a2c2 ("IB/core: Make ib_dealloc_pd return void") introduced
a WARN_ON in ib_dealloc_pd() that triggers if a PD's use count is non-zero
before de-allocating the PD.

Below is the call trace from the dmesg log.

[ 7264.966129] Call Trace:
[ 7264.969652]  [<ffffffff81338470>] dump_stack+0x44/0x64
[ 7264.976181]  [<ffffffff81086bb6>] warn_slowpath_common+0x86/0xc0
[ 7264.983656]  [<ffffffff81086cfa>] warn_slowpath_null+0x1a/0x20
[ 7264.990961]  [<ffffffffa025c2d9>] ib_dealloc_pd+0x69/0xb0 [ib_core]
[ 7264.998717]  [<ffffffffa0044de8>] ib_mad_port_close+0xb8/0x120 [ib_mad]
[ 7265.006866]  [<ffffffffa0044ebf>] ib_mad_remove_device+0x6f/0xc0 [ib_mad]
[ 7265.015224]  [<ffffffffa025fc87>] ib_unregister_device+0xa7/0x140 [ib_core]
[ 7265.023738]  [<ffffffffa04b5b79>] rvt_unregister_device+0x29/0x80 [rdmavt]
[ 7265.032181]  [<ffffffffa088d2a2>] qib_unregister_ib_device+0x22/0x210 [ib_qib]
[ 7265.040993]  [<ffffffffa085f73f>] qib_remove_one+0x1f/0x250 [ib_qib]
[ 7265.048823]  [<ffffffff8137a319>] pci_device_remove+0x39/0xc0
[ 7265.055984]  [<ffffffff81466a1a>] __device_release_driver+0x9a/0x140
[ 7265.063821]  [<ffffffff81466bc8>] driver_detach+0xb8/0xc0
[ 7265.070579]  [<ffffffff81465a15>] bus_remove_driver+0x55/0xd0
[ 7265.077717]  [<ffffffff8146732c>] driver_unregister+0x2c/0x50
[ 7265.084849]  [<ffffffff813789ba>] pci_unregister_driver+0x2a/0x80
[ 7265.092366]  [<ffffffffa08921bd>] qib_ib_cleanup+0x37/0x65 [ib_qib]
[ 7265.100068]  [<ffffffff811096d0>] SyS_delete_module+0x190/0x220
[ 7265.107379]  [<ffffffff816a7bae>] entry_SYSCALL_64_fastpath+0x12/0x71

Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Harish Chegondi <harish.chegondi@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/rdmavt: Remove unnecessary exported functions

Remove exported functions which are no longer required as the
functionality has moved into rdmavt. This also requires re-ordering some
of the functions since their prototype no longer appears in a header
file. Rather than add forward declarations it is just cleaner to
re-order some of the functions.

Reviewed-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/rdmavt: Remove signal_supported and comments

Initially it was intended that rdmavt would support some signaling
between the underlying driver and itself. However this turned out to be
unnecessary for qib and hfi1. If we need to add something like this in
later to support another driver we should do it then. As of now this
essentially dead code so remove it.

Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/rdmavt: Remove RVT_FLAGs

While hfi1 and qib were still supporting bits and pieces of core verbs
components there needed to be a way to convey if rdmavt should handle
allocation and initialize of resources like the queue pair table. Now
that all of this is moved into rdmavt there is no need for these flags.
They are no longer used in the drivers.

Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/qib,rdmavt: Move smi_ah to qib

Rdmavt adopted an smi_ah from qib which is not needed by hfi1. Move this
back to qib and get it out of the common library.

Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/qib: Setup notify free/create mad agent callbacks for rdmavt

Qib needs to be notified when mad agents are created and freed, there is
some counter maintenance that needs to be performed. Add those callbacks at
registration time with rdmavt.

Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/rdmavt: Add per verb driver callback checking

For each verb validate that all requirements for driver callbacks are met.
If a function is called without checking for a valid pointer, it is a
required function. Also document what each callback function does.

Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/rdmavt: Clean up comments and add more documentation

Add, remove, and otherwise clean up existing comments that are leftover
from the initial code postings of rdmavt. Many of the comments were added
to provide an idea on the direction we were thinking of going. Now that the
design is solidified make a pass over and clean everything up. Also add
details where lacking.

Ensure all non static functions have nano comments.

Reviewed-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

staging/rdma/hfi1: Put QPs into error state after SL->SC table changes

If an SL->SC mapping table change occurs after an RC/UC QP is created,
there is no mechanism to change the SC nor the VL for that QP. The fix
is to place the QP into error state so that ULP can recreate the QP with
the new SL->SC mapping.

Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/rdmavt: Add trace and error print statements in post_one_wr

These trace and error print statements would help in debugging issues which
are caused due to messed up QP ring buffer pointers.

Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Harish Chegondi <harish.chegondi@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/qib, staging/rdma/hfi1: add s_hlock for use in post send

This patch adds an additional lock to reduce contention on the s_lock.

This lock is used in post_send() so that the post_send is not
serialized with the send engine and other send related processing.

To do this the s_next_psn is now maintained on post_send() while
post_send() related fields are moved to a new cache line.  There is
an s_avail maintained for the post_send() to mitigate trading cache
lines with the send engine.  The lock is released/acquired around
releasing the just built packet to the egress mechanism.

Reviewed-by: Jubin John <jubin.john@intel.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Dean Luick <dean.luick@intel.com>
Signed-off-by: Harish Chegondi <harish.chegondi@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/qib: Rename several functions by adding a "qib_" prefix

This would avoid conflict with the functions in hfi1 that have similar
names when both qib and hfi1 drivers are configured to be built into
the kernel. This issue came up in the 0-day build report.

Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Harish Chegondi <harish.chegondi@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/rdmavt, staging/rdma/hfi1: use qps to dynamically scale timeout value

A busy_jiffies variable is maintained and updated when rc qps are
created and deleted. busy_jiffies is a scaled value of the number
of rc qps in the device. busy_jiffies is incremented every rc qp
scaling interval. busy_jiffies is added to the rc timeout
in add_retry_timer and mod_retry_timer. The rc qp scaling interval
is selected based on extensive performance evaluation of targeted
workloads.

Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Vennila Megavannan <vennila.megavannan@intel.com>
Signed-off-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

staging/rdma/hfi1: Turning off LED without checking if stepping is Ax

It prevents the LED from staying on when the QSFP module is
not present.

Reviewed-by: Easwar Hariharan <easwar.hariharan@intel.com>
Signed-off-by: Sebastian Sanchez <sebastian.sanchez@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

staging/rdma/hfi1: actually use new RNR timer API in loopback path

The patch series which added a new API for the RNR timer did not include an
updated call in the loopback path. RC/UC RNR loopback would be broken
without this.

Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

staging/rdma/hfi1: Tune for unknown channel if configuration file is absent

Currently, the driver fails to tune the SerDes and therefore prevents
link up if the configuration file is missing or fails parsing or
validation. This patch adds a fallback option so that the 8051 is asked
to tune for an unknown channel and possibly get the link up if tuning
succeeds. It also adds a user-friendly message to update the
configuration file if it is out-of-date.

Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Dean Luick <dean.luick@intel.com>
Signed-off-by: Easwar Hariharan <easwar.hariharan@intel.com>
Signed-off-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

staging/rdma/hfi1: Fetch platform configuration data from EFI variable

The platform configuration data has been moved into the EFI variable
store where it is populated by the HFI1 option ROM. This patch pulls
the configuration data from the new location, retaining a fallback to
request_firmware.

Reviewed-by: Dean Luick <dean.luick@intel.com>
Signed-off-by: Easwar Hariharan <easwar.hariharan@intel.com>
Signed-off-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/qib,staging/rdma/hfi1: use setup_timer api

Replace the timer API's to initialize a timer & then assign the callback
function by the setup_timer() API.

Signed-off-by: Hari Prasath Gujulan Elango <hgujulan@visteon.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/rdmavt: remove unused qp field

The field is a vestige from ipath.

Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/qib: Insure last cursor is updated prior to complete

This patch is a prerequisite for adding a separate lock
for post send.

The timing of updating s_last needs to be before returning
any send completion to avoid a race between a poll cq seeing
a completion and the post send checking for a full queue.

Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

staging/rdma/hfi1: Insure last cursor is updated prior to complete

This patch is a prerequisite for adding a separate lock
for post send.

The timing of updating s_last needs to be before returning
any send completion to avoid a race between a poll cq seeing
a completion and the post send checking for a full queue.

Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

staging/rdma/hfi1: add s_retry to diagnostics

This is needed to debug ULP issues with getting retry attributes
correctly specified.

Reviewed-by: Jubin John <jubin.john@intel.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

staging/rdma/hfi1: remove duplicate timeout print

The qp->timeout field is duplicated in the
seqfile print.

Remove it.

Reviewed-by: Jubin John <jubin.john@intel.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

staging/rdma/hfi1: use new RNR timer

Use the new RNR timer for hfi1.

For qib, this timer doesn't exist, so exploit driver
callbacks to use the new timer as appropriate.

Reviewed-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

staging/rdma/hfi1: add unique rnr timer

Add a new rnr timer to hfi1.

This allows for future optimizations having the
retry and rnr timers separate.

Reviewed-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

staging/rdma/hfi1: use mod_timer when appropriate

Use new timer API to optimize maintenance of
timers during ACK processing.

When we are still expecting ACKs, mod the timer
to avoid a heavyweight delete/add. Otherwise, insure
do_rc_ack() maintains the timer as it had.

Reviewed-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

staging/rdma/hfi1: use new timer routines

Use the new timer routines.

Reviewed-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

staging/rdma/hfi1: centralize timer routines into rc

Centralize disparate timer maintenance.

This allow for central control and changes to the RC
timer handling including future optimizations.

Reviewed-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

staging/rdma/hfi1: Removing unused struct hfi1_verbs_counters

It removes the unused struct hfi1_verbs_counters from verbs.h

Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Sebastian Sanchez <sebastian.sanchez@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

staging/rdma/hfi1: Adding support for hfi counters via sysfs

It enables access to counters in
/sys/class/infiniband/hfi1_0/ports/1/counters
by providing infrastructure when PMA queries occur. Counters symbol_error
and VL15_dropped are not supported in OPA, therefore, 0 will always be
returned. In addition, two common routines (pma_get_opa_port_dctrs,
pma_get_opa_port_ectrs) were created to query counters to avoid code
duplication.

Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Sebastian Sanchez <sebastian.sanchez@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

staging/rdma/hfi1: Replacement of goto's for break/returns

It replaces goto's for break and return statements in process_perf_opa().

Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Sebastian Sanchez <sebastian.sanchez@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

staging/rdma/hfi1: Change for data type of port number

This commit changes the data type for port_num in
pma_get_opa_porterrors() from unsigned long to u8.

Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Sebastian Sanchez <sebastian.sanchez@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

staging/rdma/hfi1: Fix bug that could block the process on context exit

A race was discovred in the user SDMA code, which could result
in an process being stuck in the kernel call indefinitely in
certain error conditions.

If, during the processing of a user SDMA request, there was an
error *and* all outstanding SDMA descriptor had been completed
by the time the that error case was handled in the calling function,
the state of the packet queue would not get correctly updated
resulting in the process subsequently getting stuck, thinking that
there are more descriptors to be completed.

To handle this scenario, the driver now checks the submitted
packet count vs. the completed. If all submitted packets have also
been completed, the driver can safely free the request and signal
user level. Otherwise, this will be handled by the completion
callback.

Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Mitko Haralanov <mitko.haralanov@intel.com>
Signed-off-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

staging/rdma/hfi1: Remove unused variable nsbr

Remove unused nsbr count from PCIe Gen3 code

Reviewed-by: Stuart Summers <john.s.summers@intel.com>
Signed-off-by: Dean Luick <dean.luick@intel.com>
Signed-off-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

staging/rdma/hfi1: Make EPROM check per device

Add a variable eprom_available to each device, replacing the
global of the same name.  This is to allow multiple HFI devices
with different EPROM availability to operate correctly on the
the same system.

Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Dean Luick <dean.luick@intel.com>
Signed-off-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

staging/rdma/hfi1: Add credits for VL0 to VL7 in snoop mode

Add a new option to the snoop ioctl which allows credits to be allocated
across all VLs. Previously only VL0 and VL15 had credits allocated.
The new option used in the ioctl HFI1_SNOOP_IOCSET_OPTS allows credits
to be allocated so that VL15 will have at least 8.5KB credits and the
other VLs will have the rest of the credits divided equally across
themselves.

The total number of credits are stored in the upper 16 bits of the
integer passed and the cumulative value should ensure that VL0 has at
least 8.5KB and each VL a minimum of 2KB + 128 bytes

Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: Dean Luick <dean.luick@intel.com>
Signed-off-by: Sadanand Warrier <sadanand.warrier@intel.com>
Signed-off-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

staging/rdma/hfi1: Improve performance of user SDMA

To facilitate locked page counting, the user SDMA
routines would maintain a list of io vectors, which
were freed in the completion callback and then unpin
the associated pages during the next call into the
kernel.

Since the size of this list was unbounded, doing this
was bad for performance because the driver ended up
spending too much time freeing the io vectors.

This commit changes how the io vector freeing is done
by moving the actual page unpinning in the callback and
maintaining a count of unpinned pages. This count can
then be used during the next call into the kernel to
update the mm->pinned_vm variable (since that requires
process context and the ability to sleep.)

Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Mitko Haralanov <mitko.haralanov@intel.com>
Signed-off-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

staging/rdma/hfi1, IB/core: Fix LinkDownReason define for consistency

LinkDownReason LocalMediaNotInstalled lacked an underscore
and was inconsistent with other defines in the same family.
This patch fixes this.

Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Easwar Hariharan <easwar.hariharan@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

staging/rdma/hfi1: Remove modify_port and port_immutable functions

Delete code from query_port which has been moved into rvt_query_port
Create a call back function to shut down a port which may be called from
rvt_modify_port

Signed-off-by: Harish Chegondi <harish.chegondi@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

staging/rdma/hfi1: Support query gid in rdmavt

Query gid is in rdmavt, but still relies on the driver to maintain the
guid table. Add the necessary driver call back and remove the existing
verb handler.

Reviewed-by: Harish Chegondi <harish.chegondi@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

staging/rdma/hfi1: Clean up init_cntrs()

Clean up init_cntrs() by removing unnecessary memsets and debug
statements

Suggested-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

staging/rdma/hfi1: Fix snoop packet length calculation

The LRH has a 12 bit packet length field, not 11 bit. This caused a
snoop packet length miscalculation leading to a crash when sending a
large ping over IPoIB while running opapacketcapture.

Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dean Luick <dean.luick@intel.com>
Signed-off-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

staging/rdma/hfi1: Correct TWSI reset

Change the TWSI reset function so it will stop the reset
once the lines are in an expected state.

Reviewed-by: Easwar Hariharan <easwar.hariharan@intel.com>
Reviewed-by: Dean Luick <dean.luick@intel.com>
Signed-off-by: Pablo Cacho <pablo.cacho@intel.com>
Signed-off-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

staging/rdma/hfi1: Remove PCIe AER diagnostic message

There are several reasons why PCIE AER cannot be enabled.  Do not
report the failure to enable as an error.

Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Dean Luick <dean.luick@intel.com>
Signed-off-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

staging/rdma/hfi1: Implement LED beaconing for maintenance

This patch implements LED beaconing for maintenance. A MAD packet with
the LEDInfo attribute set to 1 will enable LED beaconing with a duty
cycle of 2s on and 1.5s off. A MAD packet with the LEDInfo attribute
set to 0 will disable beaconing and return the LED to normal operation.

Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Easwar Hariharan <easwar.hariharan@intel.com>
Signed-off-by: Mitko Haralanov <mitko.haralanov@intel.com>
Signed-off-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

staging/rdma/hfi1: Split last 8 bytes of copy to user buffer

Copy the last 8 bytes of user mode RC WRITE_ONLY and WRITE_LAST
opcodes separately from the rest of the data.

It is a de-facto standard for some MPI implementations to use a
poll on the last few bytes of a verbs message to indicate that
the message has been received rather than follow the required
function method.  The driver uses the kernel memcpy routine, which
becomes "rep movsb" on modern machines.  This copy, while very
fast, does not guarantee in-order copy completion and the result
is an occasional perceived corrupted packet.  Avoid the issue by
splitting the last 8 bytes to copy from the verbs opcodes where it
matters and performing an in-order byte copy.

Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dean Luick <dean.luick@intel.com>
Signed-off-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

staging/rdma/hfi1: Fix fabric serdes reset by re-downloading firmware

A host fabric serdes reset is required to go back to polling.
However, access to the fabric serdes may have been invalidated
by the sibling HFI when it downloads its fabric serdes firmware.
Work around this by re-downloading and re-validating the serdes
firmware at reset time on Bx hardware.

Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Dean Luick <dean.luick@intel.com>
Signed-off-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

staging/rdma/hfi1: Report physical state changes per device instead of globally

Make physical state change reporting be per-device, not global
to reduce excessive reports of "physical state changed"

Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Dean Luick <dean.luick@intel.com>
Signed-off-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

staging/rdma/hfi1: Properly determine error status of SDMA slots

To ensure correct operation between the driver and PSM
with respect to managing the SDMA request ring, it is
important that the status for a particular request slot
is set at the correct time. Otherwise, PSM can get out
of sync with the driver, which could lead to hangs or
errors on new requests.

Properly determining of when to set the error status of
a SDMA slot depends on knowing exactly when the last txreq
for that request has been completed. This in turn requires
that the driver knows exactly how many requests have been
generated and how many of those requests have been successfully
submitted to the SDMA queue.

The previous implementation of the mid-layer SDMA API did not
provide a way for the caller of sdma_send_txlist() to know how
many of the txreqs in the input list have actually been submitted
without traversing the list and counting. Since sdma_send_txlist()
already traverses the list in order to process it, requiring
such traversal in the caller is completely unnecessary. Therefore,
it is much easier to enhance sdma_send_txlist() to return the
number of successfully submitted txreqs.

This, in turn, allows the caller to accurately determine the
progress of the SDMA request and, therefore, correctly set the
error status at the right time.

Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Mitko Haralanov <mitko.haralanov@intel.com>
Signed-off-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

staging/rdma/hfi1: correctly check for post-interrupt packets

At the end of the packet processing interrupt and thread handler,
the RcvAvail interrupt is finally cleared down.  There is a window
between the last packet check (via DMA to memory) and interrupt
clear-down.  The code to recheck for a packet once the RcvAVail
interrupt is enabled must ultimately use a CSR read of RcvHdrTail
rather than depend on DMA'ed memory.

This change adds a CSR read of RcvHdrTail if the memory check does
not show a packet preset.  The memory check is retained as a quick
test before doing the more expensive, but always correct, CSR read.

In the ASIC, the CSR read used to force the RcvAvail clear-down write
to complete may bypass queued DMA writes to memory.  The only correct
way to decide if a packet has arrived without an interrupt to push DMA
to memory ahead of itself is to read the tail directly after RcvAvail
has been cleared down.  It is not sufficient to just read the tail and
skip pushing the clear-down.  Both must be done.  The tail read will not
push clear-down write due to it being in a different area of the chip.

At this point, it is OK to have packet data still being DMA'ed to
memory.  This is the end of packet processing for previous packets.
If the driver detects a new packet has arrived before interrputs were
re-enabled, it will force a new interrupt and the interrupt will push
the packet DMAs to memory, where the driver will then react to the
interrupt and do normal packet processing.

Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dean Luick <dean.luick@intel.com>
Signed-off-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

staging/rdma/hfi1: Improve performance of SDMA transfers

Commit a0d406934a46 ("staging/rdma/hfi1: Add page lock limit
check for SDMA requests") added a mechanism to
delay the clean-up of user SDMA requests in order to facilitate
proper locked page counting.

This delayed processing was done using a kernel workqueue, which
meant that a kernel thread would have to spin up and take CPU
cycles to do the clean-up.

This proved detrimental to performance because now there are two
execution threads (the kernel workqueue and the user process)
needing cycles on the same CPU.

Performance-wise, it is much better to do as much of the clean-up
as can be done in interrupt context (during the callback) and do
the remaining work in-line during subsequent calls of the user
process into the driver.

The changes required to implement the above also significantly
simplify the entire SDMA completion processing code and eliminate
a memory corruption causing the following observed crash:

    [ 2881.703362] BUG: unable to handle kernel NULL pointer dereference at        (null)
    [ 2881.703389] IP: [<ffffffffa02897e4>] user_sdma_send_pkts+0xcd4/0x18e0 [hfi1]
    [ 2881.703422] PGD 7d4d25067 PUD 77d96d067 PMD 0
    [ 2881.703427] Oops: 0000 [#1] SMP
    [ 2881.703431] Modules linked in:
    [ 2881.703504] CPU: 28 PID: 6668 Comm: mpi_stress Tainted: G           OENX 3.12.28-4-default #1
    [ 2881.703508] Hardware name: Intel Corporation S2600KP/S2600KP, BIOS SE5C610.86B.11.01.0044.090
    [ 2881.703512] task: ffff88077da8e0c0 ti: ffff880856772000 task.ti: ffff880856772000
    [ 2881.703515] RIP: 0010:[<ffffffffa02897e4>]  [<ffffffffa02897e4>] user_sdma_send_pkts+0xcd4/0x
    [ 2881.703529] RSP: 0018:ffff880856773c48  EFLAGS: 00010287
    [ 2881.703531] RAX: 0000000000000000 RBX: 0000000000001000 RCX: 0000000000002000
    [ 2881.703534] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000002000
    [ 2881.703537] RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000000
    [ 2881.703540] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000
    [ 2881.703543] R13: 0000000000000000 R14: ffff88071e782e68 R15: ffff8810532955c0
    [ 2881.703546] FS:  00007f9c4375e700(0000) GS:ffff88107eec0000(0000) knlGS:0000000000000000
    [ 2881.703549] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
    [ 2881.703551] CR2: 0000000000000000 CR3: 00000007d4cba000 CR4: 00000000003407e0
    [ 2881.703554] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
    [ 2881.703556] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
    [ 2881.703558] Stack:
    [ 2881.703559]  ffffffff00002000 ffff881000001800 ffffffff00000000 00000000000080d0
    [ 2881.703570]  0000000000000000 0000200000000000 0000000000000000 ffff88071e782db8
    [ 2881.703580]  ffff8807d4d08d80 ffff881053295600 0000000000000008 ffff88071e782fc8
    [ 2881.703589] Call Trace:
    [ 2881.703691]  [<ffffffffa028b5da>] hfi1_user_sdma_process_request+0x84a/0xab0 [hfi1]
    [ 2881.703777]  [<ffffffffa0255412>] hfi1_aio_write+0xd2/0x110 [hfi1]
    [ 2881.703828]  [<ffffffff8119e3d8>] do_sync_readv_writev+0x48/0x80
    [ 2881.703837]  [<ffffffff8119f78b>] do_readv_writev+0xbb/0x230
    [ 2881.703843]  [<ffffffff8119fab8>] SyS_writev+0x48/0xc0

This commit also addresses issues related to notification of user
processes of SDMA request slot availability. The slot should be
cleaned up first before the user processes is notified of its
availability.

Reviewed-by: Arthur Kepner <arthur.kepner@intel.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Mitko Haralanov <mitko.haralanov@intel.com>
Signed-off-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

staging/rdma/hfi1: Use device file minor to identify EPROM

When writing to the EPROM, the driver will always use the
"first" device.  This is incorrect for multiple cards.

Use the device file minor to determine the device to use.
Reject the generic device file.

Reviewed-by: Mitko Haralanov <mitko.haralanov@intel.com>
Signed-off-by: Dean Luick <dean.luick@intel.com>
Signed-off-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

staging/rdma/hfi1: Reduce syslog message severity and provide speed information

The syslog message causes unnecessary alarm for the single and dual port
x8 cards by reporting at an error level. This patch reduces the severity
to informational only and adds speed information.

Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Easwar Hariharan <easwar.hariharan@intel.com>
Signed-off-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

staging/rdma/hfi1: Improve performance of TID cache look up

When TID caching was enabled, the way the driver found
RB nodes when PSM was unprogramming TID entries was by
traversing the RB tree, looking for a match on the
RcvArray entry index.

The performance of this algorithm was not only poor but
also inconsistent depending on how many RB nodes would
have to be traversed before a match was found.

The lower performance was especially evident in cases where
there was a cache miss with the cache full, requiring the
unprogramming of several TID entries.

This commit changes how RB nodes are looked up when being
free'd by PSM to a index-based lookup into a flat array on
the index of the RcvArray entry. This turns the entire
look-up process into an O(1) algorithm.

Special care needs to be taken for situations when TID
caching is disabled. In those cases, there is no need to
insert the RB nodes into an actual RB tree. Since the entire
RcvArray management mechanism is managed by an index-based
algorithm, the RB nodes can be saved into the flat array,
making both "insertion" and "removal" faster.

Reviewed-by: Arthur Kepner <arthur.kepner@intel.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Mitko Haralanov <mitko.haralanov@intel.com>
Signed-off-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

staging/rdma/hfi1: Fix for module parameter rcvhdrcnt when it's 2097152

The driver crashes when loaded with parameter rcvhdrcnt=2097152.
The root cause was that rcvhdrcnt was initially a 32 bit variable
and its value was assigned to a 16 bit variable, truncating the
upper 16 bits. This patch prevents the user from passing a value
for rcvhdrcnt greater than 16352 (Maximum number for rcvhdrcnt).

Reviewed-by: Dean Luick <dean.luick@intel.com>
Reviewed-by: Mitko Haralanov <mitko.haralanov@intel.com>
Signed-off-by: Sebastian Sanchez <sebastian.sanchez@intel.com>
Signed-off-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>