V4L/DVB (7602): em28xx: generalise URB setup code

Move the URB setup and management code to em28xx-core.c and generalise
it slighlty so that the DVB code can use it.

Signed-off-by: Aidan Thornton <makosoft@googlemail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (7601): em28xx-dvb: add support for the HVR-900

Adds the correct GPIOs and demod attach code for the HVR-900

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (7600): em28xx: Sets frequency when changing to analog mode

This will make tuner-xc2028 to change to analog, if needed.

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (7599): em28xx-dvb: videobuf callbacks are waiting for em28xx_fh

Thanks to Devin Heitmueller <devin.heitmueller@gmail.com> for pointing
this issue.

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (7598): em28xx: several fixes on gpio programming

em28xx-cards.c:
 - Fix reversed val/rst values in both analog_gpio and digital_gpio
   vectors
 - Fix crash that would was occurring during every analog startup
   while looping over gpio_ctl
 - Remove what appears to be a redundant setting of gpio_ctl->val
 - Don't use OREN538 demodulation for the HVR-950 (prevents ATSC
   scanning from working)

em28xx-dvb.c:
 - Tuner should be in digital mode when issuing the reset
 - Add copyright
 - Change struct definition (corresponds to fix in em28xx-cards.c for
   gpio_ctl looping)

Signed-off-by: Devin Heitmueller <devin.heitmueller@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (7597): em28xx: share the same xc3028 setup for analog and digital modes

Thanks to Devin Heitmueller <devin.heitmueller@gmail.com> and Aidan
Thornton" <makosoft@googlemail.com> for pointing some errors with the
previous scenario.

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (7596): em28xx-dvb: Add support for HVR950

This patch adds DVB support for Hauppauge HVR950.

Thanks to Michael Krufky <mkrufky@linuxtv.org> for getting those values.

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (7595): Improve generic support for setting gpio values

em28xx based devices with xc3028 may require some specific gpio values.
This patch adds a generic handling for such values.

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (7594): em28xx: Fix Kconfig

Some devices have msp3400 audio decoder chip. Selects it, if em28xx.

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (7593): em28xx: add a module to handle dvb

This patch adds em28xx-dvb. This driver is highly based on cx88-dvb and
saa7134-dvb.

This code currently loads and unloads successfully. However, some
changes are needed to properly support the mpeg streams and to setup
em28xx to work on DVB mode.

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (7591): drivers/media/video: use time_before, time_before_eq, etc

The functions time_before, time_before_eq, time_after, and time_after_eq
are more robust for comparing jiffies against other values.

A simplified version of the semantic patch making this change is as follows:
(http://www.emn.fr/x-info/coccinelle/)

// <smpl>
@ change_compare_np @
expression E;
@@

(
- jiffies <= E
+ time_before_eq(jiffies,E)
|
- jiffies >= E
+ time_after_eq(jiffies,E)
|
- jiffies < E
+ time_before(jiffies,E)
|
- jiffies > E
+ time_after(jiffies,E)
)

@ include depends on change_compare_np @
@@

@ no_include depends on !include && change_compare_np @
@@

  #include <linux/...>
+ #include <linux/jiffies.h>
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (7590): ir-common: Adds 3 missing IR keys for FlyVIdeo2000

The patch extends the default keymap of FlyVIdeo2000 IR remote control so that
this remote may also serve movie & music players in a better way.

I bought a SAA7130 TV tuner with a remote control having 3 additional button
as the default layout, exactly as:

1) labeled "<<<" : key code 0x19, may be used as "backward"in MPlayer,XMMS etc

2) labeled ">>>" : key code 0x1f, may be used as "forward"...

3) not labeled : key code 0x0a, may be used as "pause"...

Once have added these code definitions to the kernel, me got all these
operations available for viewing movies & listening music.

Signed-off-by : Ivan Bobyr <brefi@yandex.ru>

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (7589): ibmcam: improve support for the IBM PC Camera Pro

This patch modifies Dmitri's original ibmcam driver for Linux to improve
support for the IBM PC Camera Pro.  It may also offer improved support for
other models classified by the driver as 'Model 3', such as the IBM PC Camera
Pro Max.

See http://auricle.dyndns.org/xvp610/

Signed-off-by: David Hilvert <dhilvert@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (7584): Fix build that occurs when CONFIG_VIDEO_PMS=y and VIDEO_V4L2_COMMON=m

This patch removes zoran checks for VIDEO_V4L2, since this API is always
present, when V4L is selected.

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (7582): proc: switch /proc/driver/radio-typhoon to seq_file interface

Signed-off-by: Alexey Dobriyan <adobriyan@sw.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (7580): Fix concurrent read from /proc/videocodecs

Observation one: ->write_proc and ->data assignments aren't needed. Removed.
Observation two: codecs lists are unprotected. Patch doesn't fix this.
Observation three:
/proc/videocodecs printout is done to temporary _global_ buffer which
is freed in between. Consequently, two users hitting this file can
screwup each other.

Steps to reproduce:

modprobe videocodec
while true; do cat /proc/videocodecs &>/dev/null; done &
while true; do cat /proc/videocodecs &>/dev/null; done &

The fix is switching to seq_files, this removes code, especially some
line-length "logic".

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Acked-by: Jan Kara <jack@suse.cz>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (7579): bttv: Fix memory leak in radio_release

Fix the leak of the bttv_fh structure allocated in radio_open which
was introduced by commit 5cd3955cb8adfc1edf481e9e1cb2289db50ccacb.

Signed-off-by: Robert Fitzsimons <robfitz@273k.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (7575a): Revert changeset 4c3b01f71181a52ab7735a7c52b1aa2232826075

Due to the patch order change, pvrusb2 were broken. So, changeset
4c3b01f71181a52ab7735a7c52b1aa2232826075 were applied at mainstream to fix.
After the pvrusb2 changes, this patch is no longer required and should be
reverted.

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (7569): Added support for SkyStar2 rev2.7 and ITD1000 DVB-S tuner

This patches adds support for the SkyStar2 rev2.7 with the PN1010/ITD1000 Frontend.

Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (7471): SkyStar2: preparing support for the rev2.8

Support is prepared, but the CX24113-driver .c-file is missing. After sorting out the NDA problems, the file will be there immediatly.

Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (7575): mt312: add attach-time setting to invert lnb-voltage

Add a setting to config struct for inversion of lnb-voltage.
Needed for support of Avermedia A700 cards.

Signed-off-by: Matthias Schwarzott <zzam@gentoo.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (7574): mt312: Add support for zl10313 demod

Add zl10313 support to mt312 driver.
zl10313 uses 10.111MHz xtal.

Signed-off-by: Matthias Schwarzott <zzam@gentoo.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (7573): mt312: Supports different xtal frequencies

Do not hardcode xtal frequency but allow different values
for future zl10313 support.

Signed-off-by: Matthias Schwarzott <zzam@gentoo.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (7572): mt312: Fix diseqc

Correct the frequency of the emitted diseqc signal to 22kHz.
Adds sleep(100) to wait for message to be transmitted.

For now the only user of mt312 is b2c2-flexcop, and it
does overwrite all diseqc related functions with own code.

Signed-off-by: Matthias Schwarzott <zzam@gentoo.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (7571): mt312: Cleanup buffer variables of read/write functions

Change type of buffer variables from void* to u8* to save some casts.

Signed-off-by: Matthias Schwarzott <zzam@gentoo.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (7568): Support for DVB-S demod PN1010 (clone of S5H1420) added

This device is a clone of the PN1010 used by SkyStar2 rev2.7 .

This patch adds support for the flexcop-device and makes the driver look a little bit nicer.

It needs to be checked whether the driver is still ok for the budget-cards.

Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (7567): em28xx: Some cleanups

Removes some fields from data structs.

There are some fields that are just caching some calculus for buffer
size. The calculus were moved to the places it were needed and the now
unused fields were removed.

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (7566): videobuf-dvb: allow its usage with videobuf-vmalloc

videobuf-dvb were still using a function that were videobuf-dma-sg
dependent. This patch creates a generic handler for this function. This
way, videobuf-dvb can now work with all videobuf implementations.

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (7565): em28xx: fix buffer underrun handling

This patch fixes three related issues and a fourth trivial one:

- Use buffers even if no-one's currently waiting for them (fixes
  underrun issues);

- Don't return incomplete/mangled frames at the start of streaming and
  in the case of buffer underruns;

- Fix an issue which could cause the driver to write to a buffer that's
  been freed after videobuf_queue_cancel is called (exposed by the
  previous two fixes - for some reason, ignoring buffers that weren't
  being waited on worked around the issue);

- Fix a bug which could cause only one field to be filled in the first
  buffer (or first few buffers) after streaming is started.

Signed-off-by: Aidan Thornton <makosoft@googlemail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (7564): em28xx: Some fixes to display logic

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (7563): em28xx: Add missing checks

There are some cases where nobody is waiting for a buffer. Due to the
lack of check, if you try to abort the userspace app, machine were
hanging, since IRQ were trying to use a buffer that were disallocated.

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (7562): videobuf: Require spinlocks for all videobuf users

A spinlock is necessary for queue_cancel to work with every driver in the tree.
Otherwise a race exists between IRQ handlers removing buffers from the queue
and queue_cancel invalidating the queue.

Signed-off-by: Brandon Philips <bphilips@suse.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (7561): videobuf-vmalloc: stop streaming before unmap

Before the patch, there were a risk of freeing and unmapping userspace memory,
while there were pending requests.

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (7560): videodev: Some printk fixes

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (7559): em28xx: Fills the entire buffer, before getting another one

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (7558): videobuf: Improve command output for debug purposes

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (7557): em28xx: honour video_debug modprobe parameter

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (7556): em28xx: fix locking on vidioc_s_fmt_cap

Currently, vidioc_s_fmt_cap is allowed even if streaming is running on some
other fh. This is likely to cause issues.

Block use of vidioc_s_fmt_cap if someone else has claimed access to the device.

Signed-off-by: Aidan Thornton <makosoft@googlemail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (7555): em28xx: remove timeout

It seems that we don't need a timeout for em28xx.

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (7554): videobuf-dma-sg: Remove unused flag

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (7553): videobuf-vmalloc: fix STREAMOFF/STREAMON

There were a small bug on videobuf-vmalloc that were preventing STREAMOFF to
work. The issue is that vmalloc'ed mmaped memory should only be freed after
being sure that there aren't any mmap usage. Otherwise, the memory remap will
stop working, and the userspace won't receive any frames.

This bug were affecting some userspace applications, like tvtime.

After this patch, tvtime started to work again with the drivers that use
videobuf-vmalloc.

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (7552): videbuf-vmalloc: Corrects mmap code

There were some bugs on videobuf-vmalloc.

Basically, remap were called with a wrong parameter. Due to that, a later remap
were needed, generating the need of some hacks on videobuf-vmalloc and
videobuf-core.

This patch fixes the remap and removes the hacks.

TODO:

- V4L2_MEMORY_USERPTR is not implemented yet. This method should be
  properly implemented, in order to work with a few userspace applications.

- The driver also doesn't implement V4L2_MEMORY_OVERLAY. This method is used
  only by a few applications, and are becaming obsolete, due to the increment
  of cpu performance. So, most apps prefer to retrieve data to an internal
  buffer, doing some processing like de-interlacing.

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (7551): vivi: Add a missing \n

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (7550): em28xx: Fix a possible memory leak

I did notice a possible memory leak since iolock is could possibly be
called before a buffer has been freed.

This ensure s_fmt isn't called while the queue is busy thereby avoiding
iolock on already allocated buffers.

Signed-off-by: Brandon Philips <bphilips@suse.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (7549): em28xx: some small cleanups

- Remove dead code;
- Fix a few CodingStyle issues;
- Prints frame number, if debug is enabled.

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (7548): Various fixes for the em28xx videobuf code

- Aborting buffer_filled if no-one's waiting on the waitqueue probably isn't
  what we want, since just because no-one's waiting for it now doesn't mean they
  wouldn't dequeue it in time. (vivi gets away with this, possibly because it
  can fill each buffer much faster.)

- The first BUG_ON(lencopy <= 0); really isn't worth causing a kernel panic
  over, especially since there are some reasons why it could trigger in normal use.

- The top and botom frames are actually the wrong way around.

Signed-off-by: Aidan Thornton <makosoft@googlemail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (7547): em28xx: Fix a broken lock

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (7545): em28xx: Fix CodingStyle errors and most warnings introduced by videobuf

The last videobuf changes introduced several CodingStyle errors. Fixes all those
errors, as reported by checkpatch.pl

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (7544): em28xx: Fix timeout code

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (7543): Fix capture start/stop and timeout

Also removes the dead restart_video_queue() function

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (7542): em28xx: Fix some warnings

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (7541): em28xx: Some fixes to videobuf

It fixes a couple of minor bugs, comments out a bogus BUG_ON, sets fh->type
correctly, uses dev->width and dev->height for now, and adds a missing spinlock
init (nasty - caused a system lockup). It also adds some debug code which
probably isn't all that useful. I haven't tested this version of the patch yet,
though, so I'm not sure what you can expect if you try it.

Signed-off-by: Aidan Thornton <makosoft@googlemail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (7540): em28xx: convert to use videobuf-vmalloc

The usage of videobuf-vmalloc allows to cleanup em28xx logic.

Also, it reduced its size by about 5.42% on i386 arch (and about 7.5% on x86_64):

  39113    4876      40   44029    abfd old/em28xx.ko
  36731    4868      40   41639    a2a7 /home/v4l/master/v4l/em28xx.ko

Also, the preliminary tests, made on a single core 1.5 MHz Centrino showed
that CPU usage reduced from 42%-75% to 28%-33% (reports from "top") command.

A test with time command presented an even better result:

This is the performance tests I did, running code_example to get 1,000 frames
@29.995 Hz (about 35 seconds of stream), tested on a i386 machine, running at
1,5GHz:

The old driver:

$ time -f "%E: %Us User time, %Ss Kernel time, %P CPU used" ./capture_example
0:34.21: 8.22s User time, 25.16s Kernel time, 97% CPU used

The videobuf-based driver:

$ time -f "%E: %Us User time, %Ss Kernel time, %P CPU used" ./capture_example
0:35.36: 0.01s User time, 0.05s Kernel time, 0% CPU used

Conclusion:

The time consumption to receive the stream where reduced from about 33.38
seconds to 0.05 seconds.

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (7538): Adds selectable adapter numbers as per module option

The adapter_nr module options can be used to allocate static adapter
numbers on a driver level. It avoids problems with changing DVB apapter
numbers after warm/cold boot or device unplugging and repluging.

Each driver holds DVB_MAX_ADAPTER long array of the preferred order of
adapter numbers.

options dvb-usb-dib0700 adapter_nr=7,6,5,4,3,2,1,0 would result in a
reversed allocation of adapter numbers.

With adapter_nr=2,5 it tries first to get adapter number 2 and 5. If
both are already in use it will allocate the lowest free adapter number.

Signed-off-by: Janne Grunau <janne-dvb@grunau.be>
Acked-by: Hermann Pitton <hermann.pitton@arcor.de>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (7537): cx88/saa7134: Fix: avoid OOPS on module unload

If frontend is not attached, both cx88-dvb and saa7134-dvb don't
register DVB. However, dvb unregister were inconditionally called.

Due to that, an OOPS is generated.

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (7535): saa717x: add new audio/video decoder i2c driver

Added the last remaining out-of-tree kernel driver from the ivtv project.
The saa717x is used in several Japanese cards and a Russian card. The
driver is not complete in that only NTSC is supported and no PAL/SECAM.

Hopefully this will be added in the future.

Signed-off-by: Takahiro Adachi <tadachi@tadachi-net.com>
Signed-off-by: Kyuma Ohta <whatisthis@jcom.home.ne.jp>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (7534): ivtv: the upd* modules have to be probed to properly autodetect some cards

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (7532): budget: Add support for Fujitsu Siemens DVB-T Activy Budget

Implement support for Fujitsu Siemens DVB-T Activy Budget, sub-system id 0x1131:0x5f61.

Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (7531): budget-av: Fix CI interface on (some) KNC1 DVBS cards

Quoting the commit introducing reinitialise_demod (3984 / by adq):
"These cards [KNC1 DVBT and DVBC] need special handling for CI - reinitialising the frontend
device when the CI module is reset."
Apparently my 1894:0010 also needs that fix, because once you initialise CI/CAM you lose lock.

Signed-off-by: Christoph Pfister <pfister@linuxtv.org>
Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (7530): budget-av: Fix support for certain cams

The current ci implementation doesn't accept 0xff when reading data bytes (address == 0),
thus breaks cams which report a buffer size of 0x--ff like my orion one.
Remove the 0xff check altogether, because validation is really the job of a higher layer.

Signed-off-by: Christoph Pfister <pfister@linuxtv.org>
Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (7529): media/video/zc0301 replace remaining __FUNCTION__ occurrences

__FUNCTION__ is gcc-specific, use __func__

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (7528): media/video/usbvideo replace remaining __FUNCTION__ occurrences

__FUNCTION__ is gcc-specific, use __func__

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (7527): media/video/sn9c102 replace remaining __FUNCTION__ occurrences

__FUNCTION__ is gcc-specific, use __func__

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (7526): media/video/saa7134 replace remaining __FUNCTION__ occurrences

__FUNCTION__ is gcc-specific, use __func__

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (7525): media/video/pwc replace remaining __FUNCTION__ occurrences

__FUNCTION__ is gcc-specific, use __func__

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (7524): media/video/ovcamchip replace remaining __FUNCTION__ occurrences

__FUNCTION__ is gcc-specific, use __func__

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (7523): media/video/et61x251 replace remaining __FUNCTION__ occurrences

__FUNCTION__ is gcc-specific, use __func__

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (7522): media/video/em28xx replace remaining __FUNCTION__ occurrences

__FUNCTION__ is gcc-specific, use __func__

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (7521): media/video/cx88 replace remaining __FUNCTION__ occurrences

__FUNCTION__ is gcc-specific, use __func__

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (7520): media/video/cx23885 replace remaining __FUNCTION__ occurrences

__FUNCTION__ is gcc-specific, use __func__

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (7519): media/video/cpia2 replace remaining __FUNCTION__ occurrences

__FUNCTION__ is gcc-specific, use __func__

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (7518): media/video/ replace remaining __FUNCTION__ occurrences

__FUNCTION__ is gcc-specific, use __func__

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (7517): media/dvb/ttusb-dec replace remaining __FUNCTION__ occurrences

__FUNCTION__ is gcc-specific, use __func__

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (7516): media/dvb/ttusb-budget replace remaining __FUNCTION__ occurrences

__FUNCTION__ is gcc-specific, use __func__

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (7515): media/dvb/ttpci replace remaining __FUNCTION__ occurrences

__FUNCTION__ is gcc-specific, use __func__

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Acked-by: Oliver Endriss <o.endriss@gmx.de>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (7514): media/dvb/frontends replace remaining __FUNCTION__ occurrences

__FUNCTION__ is gcc-specific, use __func__

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Acked-by: Oliver Endriss <o.endriss@gmx.de>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (7513): media/dvb/dvb-usb replace remaining __FUNCTION__ occurrences

__FUNCTION__ is gcc-specific, use __func__

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (7512): media/dvb/dvb-core replace remaining __FUNCTION__ occurrences

__FUNCTION__ is gcc-specific, use __func__

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Acked-by: Oliver Endriss <o.endriss@gmx.de>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (7511): media/dvb/cinergyT2 replace remaining __FUNCTION__ occurrences

__FUNCTION__ is gcc-specific, use __func__

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (7510): media/dvb/bt8xx replace remaining __FUNCTION__ occurrences

__FUNCTION__ is gcc-specific, use __func__

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (7509): media/dvb/b2c2 replace remaining __FUNCTION__ occurrences

__FUNCTION__ is gcc-specific, use __func__

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (7508): media/common/ replace remaining __FUNCTION__ occurrences

__FUNCTION__ is gcc-specific, use __func__

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Acked-by: Oliver Endriss <o.endriss@gmx.de>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (7507): saa7134: add analog support for Avermedia A700 cards

Add support for composite and s-video inputs on
Avermedia DVB-S Pro and DVB-S Hybrid+FM cards
(both labled A700) to the saa7134 driver.

XC2028 support for Hybrid+FM is still missing.

Signed-off-by: Matthias Schwarzott <zzam@gentoo.org>
Reviewed-by: Hermann Pitton <hermann.pitton@arcor.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (7506): Powercolor Real Angel 330 (remote control support)

The attached patch adds complete remote control support for Powercolor Real
Angel 330.

Signed-off-by: Daniel Fraga <fragabr@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (7505): Powercolor Real Angel 330 (fixes gpio references)

The attached patch fixes gpio references for Powercolor Real Angel 330.

Signed-off-by: Daniel Fraga <fragabr@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (7503): usbvision: rename __PRETTY_FUNCTION__ occurrences

__PRETTY_FUNCTION__ has no sense in C lang context. Rename it as __func__

Signed-off-by: Thierry MERLE <thierry.merle@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (7502): v4l: video/usbvision replace remaining __FUNCTION__ occurrences

__FUNCTION__ is gcc-specific, use __func__

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Thierry MERLE <thierry.merle@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (7501): soc-camera: use a spinlock for videobuffer queue

All drivers should provide a spinlock to be used in videobuf operations.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@pengutronix.de>
Reviewed-by: Brandon Philips <bphilips@suse.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (7500): soc-camera: extract function pointers from host object into operations

Function pointers and the driver owner are not expected to change
throughout soc-camera host's life. Extract them into an operations struct.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@pengutronix.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (7494): videobuf-dma-sg.c: Avoid NULL dereference and add comment about backwards compatibility

Signed-off-by: Brandon Philips <bphilips@suse.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (7493): videobuf: Avoid deadlock with QBUF and bring up to spec for empty queue

Add a waitqueue to wait on when there are no buffers in the buffer queue.
DQBUF waits on this queue without holding vb_lock to allow a QBUF to happen.
Once a buffer has been queued we recheck that the queue is still streaming and
wait on the new buffer's waitqueue while holding the vb_lock.  The driver
should come along in a timely manner and put the buffer into its next state
finishing the DQBUF.

By implementing this waitqueue it also brings the videobuf DQBUF up to spec and
it now blocks on O_NONBLOCK even when no buffers have been queued via QBUF:

"By default VIDIOC_DQBUF blocks when no buffer is in the outgoing queue."
 - V4L2 spec

Signed-off-by: Brandon Philips <bphilips@suse.de>
CC: Trent Piepho <xyzzy@speakeasy.org>
CC: Carl Karsten <carl@personnelware.com>
CC: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (7492): vivi: Simplify the vivi driver and avoid deadlocks

vivi previously had a very complex queuing system and held spinlocks while
doing copy_to_user, kmalloc, etc.  This caused the driver to easily deadlock
when a multi-threaded application used it and revealed bugs in videobuf too.

This replaces the copy_to_user with memcpy since we were never copying to user
space addresses.  And makes the kmalloc atomic.

Signed-off-by: Brandon Philips <bphilips@suse.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (7491): vivi: make vivi openable only once

vivi currently doesn't have the infrastructure to handle being opened more than
one time and will crash if it is.  So, make it openable only once.

Signed-off-by: Brandon Philips <bphilips@suse.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (7489): videobuf-vmalloc.c: Remove buf_release from videobuf_vm_close

Remove the buf_release on vm_close because it will lead to a buffer being
released multiple times since all buffers are already freed under the two
possible cases: device close or STREAMOFF.

Signed-off-by: Brandon Philips <bphilips@suse.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (7488): videobuf: Simplify videobuf_waiton logic and possibly avoid missed wakeup

Possible missed wakeup- use kernel helpers for wait queues
  http://www.mail-archive.com/linux-usb-devel@lists.sourceforge.net/msg27983.html

Signed-off-by: Brandon Philips <bphilips@suse.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (7487): videobuf: Wakeup queues after changing the state to ERROR

The waitqueues must be woken up every time state changes.

Signed-off-by: Brandon Philips <bphilips@suse.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (7483): tuner-simple: fix broken build dependency

tuner-simple is the only module that uses tuner-types - these will be
merged to a single module in the future.  For now, build both of them
if TUNER_SIMPLE is selected.

This fixes the following build warning, if tuner-simple is selected
without tuner-types:

WARNING: "tuner_count" [tuner-simple.ko] undefined!
WARNING: "tuners" [tuner-simple.ko] undefined!

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (7481): tda18271: fix standard map debug

Show IF level and rf agc top settings in standard map dumps.

Dump standard map during attach if DBG_MAP or DBG_ADV is set.

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (7480): make sn9c102_i2c_try_write() static

This patch makes the needlessly global sn9c102_i2c_try_write() static.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
CC: Luca Risolia <luca.risolia@studio.unibo.it>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (7479): proper prototype for zoran_device.c:zr36016_write()

This patch adds a proper prototype for zr36016_write() in
drivers/media/video/zoran_card.h

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>