James Bottomley [Thu, 16 Apr 2015 05:16:01 +0000 (22:16 -0700)]
mvsas: fix panic on expander attached SATA devices
mvsas is giving a General protection fault when it encounters an expander
attached ATA device. Analysis of mvs_task_prep_ata() shows that the driver is
assuming all ATA devices are locally attached and obtaining the phy mask by
indexing the local phy table (in the HBA structure) with the phy id. Since
expanders have many more phys than the HBA, this is causing the index into the
HBA phy table to overflow and returning rubbish as the pointer.
mvs_task_prep_ssp() instead does the phy mask using the port properties.
Mirror this in mvs_task_prep_ata() to fix the panic.
Reported-by: Adam Talbot <ajtalbot1@gmail.com>
Tested-by: Adam Talbot <ajtalbot1@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: James Bottomley <JBottomley@Odin.com>
Hannes Reinecke [Fri, 27 Mar 2015 13:31:12 +0000 (14:31 +0100)]
am53c974: Fix crash during modprobe
On systems with shared interrupts the interrupt routine might
be called as soon as the interrupt is enabled.
As this might happen before pci_set_drvdata() is called the
system would crash.
Reported-by: Andreas Brogle <anbro@ok.de>
Tested-by: Andreas Brogle <anbro@ok.de>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: James Bottomley <JBottomley@Odin.com>
Christoph Hellwig [Wed, 15 Apr 2015 16:44:37 +0000 (09:44 -0700)]
megaraid_sas: use raw_smp_processor_id()
We only want to steer the I/O completion towards a queue, but don't
actually access any per-CPU data, so the raw_ version is fine to use
and avoids the warnings when using smp_processor_id().
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reported-by: Andy Lutomirski <luto@kernel.org>
Tested-by: Andy Lutomirski <luto@kernel.org>
Acked-by: Sumit Saxena <sumit.saxena@avagotech.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: James Bottomley <JBottomley@Odin.com>
Martin K. Petersen [Tue, 14 Apr 2015 21:11:03 +0000 (17:11 -0400)]
sd: Fix missing ATO tag check
3aec2f41a8bae introduced a merge error where we would end up check for
sdkp instead of sdkp->ATO. Fix this so we register app tag capability
correctly.
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Cc: <stable@vger.kernel.org> # v3.17+
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: James Bottomley <JBottomley@Odin.com>
Martin K. Petersen [Tue, 14 Apr 2015 20:56:23 +0000 (16:56 -0400)]
sd: Unregister integrity profile
The new integrity code did not correctly unregister the profile for SD
disks. Call blk_integrity_unregister() when we release a disk.
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Reported-by: Sagi Grimberg <sagig@dev.mellanox.co.il>
Tested-by: Sagi Grimberg <sagig@mellanox.com>
Cc: stable@vger.kernel.org # v3.17+
Signed-off-by: James Bottomley <JBottomley@Odin.com>
James Bottomley [Wed, 1 Apr 2015 09:09:36 +0000 (09:09 +0000)]
change SCSI Maintainer email
We've recently suffered a rebranding and the Service Provider half of
Parallels has become Odin. This means my email has changed so update
the MAINTAINERS file (and tidy up the pointers to our git trees to be
correct).
Signed-off-by: James Bottomley <JBottomley@Odin.com>
James Bottomley [Fri, 6 Mar 2015 02:47:01 +0000 (18:47 -0800)]
sd, mmc, virtio_blk, string_helpers: fix block size units
The current string_get_size() overflows when the device size goes over
2^64 bytes because the string helper routine computes the suffix from
the size in bytes. However, the entirety of Linux thinks in terms of
blocks, not bytes, so this will artificially induce an overflow on very
large devices. Fix this by making the function string_get_size() take
blocks and the block size instead of bytes. This should allow us to
keep working until the current SCSI standard overflows.
Also fix virtio_blk and mmc (both of which were also artificially
multiplying by the block size to pass a byte side to string_get_size()).
The mathematics of this is pretty simple: we're taking a product of
size in blocks (S) and block size (B) and trying to re-express this in
exponential form: S*B = R*N^E (where N, the exponent is either 1000 or
1024) and R < N. Mathematically, S = RS*N^ES and B=RB*N^EB, so if RS*RB
< N it's easy to see that S*B = RS*RB*N^(ES+EB). However, if RS*BS > N,
we can see that this can be re-expressed as RS*BS = R*N (where R =
RS*BS/N < N) so the whole exponent becomes R*N^(ES+EB+1)
[jejb: fix incorrect 32 bit do_div spotted by kbuild test robot <fengguang.wu@intel.com>]
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: James Bottomley <JBottomley@Odin.com>
Yaniv Gardi [Tue, 31 Mar 2015 14:37:14 +0000 (17:37 +0300)]
ufs: add support to allow non standard behaviours (quirks)
Some implementation of UFS host controller HW might have some non-standard
behaviours (quirks) when compared to behaviour specified by UFSHCI
specification. This patch add support to allow specifying all such quirks
to standard UFS host controller driver so standard driver takes them into
account.
In this change a UFSHCD_QUIRK_DELAY_BEFORE_DME_CMDS is introduced,
where a minimum delay of 1ms is required before DME commands for
stability purposes.
Signed-off-by: Yaniv Gardi <ygardi@codeaurora.org>
Reviewed-by: Gilad Broner <gbroner@codeaurora.org>
Signed-off-by: James Bottomley <JBottomley@Odin.com>
Yaniv Gardi [Tue, 31 Mar 2015 14:37:13 +0000 (17:37 +0300)]
ufs-qcom: save controller revision info in internal structure
Sometimes, specific information about the UFS controller revision is
required in order to determine certain operations or execute
controller dependent quirks.
In order to avoid reading the controller revision multiple times,
we simply read it once and save this information in internal structure.
Signed-off-by: Yaniv Gardi <ygardi@codeaurora.org>
Reviewed-by: Gilad Broner <gbroner@codeaurora.org>
Signed-off-by: James Bottomley <JBottomley@Odin.com>
Himanshu Madhani [Thu, 9 Apr 2015 19:00:08 +0000 (15:00 -0400)]
qla2xxx: Update driver version to 8.07.00.18-k
Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: James Bottomley <JBottomley@Odin.com>
Sawan Chandak [Thu, 9 Apr 2015 19:00:07 +0000 (15:00 -0400)]
qla2xxx: Restore physical port WWPN only, when port down detected for FA-WWPN port.
For FA-WWPN is enabled port, if NPIV created on that port and,
if port link is brought down, then WWPN was restored from flash for both
physical and NPIV port. This will result in NPIV port and physical port
sharing same WWPN. Any application refreshing ports information will
not be able to scan NPIV port because of this behavior. So while restoring WWPN,
only restore physical port WWPN.
Signed-off-by: Sawan Chandak <sawan.chandak@qlogic.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: James Bottomley <JBottomley@Odin.com>
Sawan Chandak [Thu, 9 Apr 2015 19:00:06 +0000 (15:00 -0400)]
qla2xxx: Fix virtual port configuration, when switch port is disabled/enabled.
On some vendor switches, when switch port is toggled (down /up),
then in some condition driver tries to configure virtual port,
before FW is actually in ready state to process any commands on wire.
At this time, configuring virtual port can fail. Add fix in driver
to make driver wait, for FW to be ready state before
Signed-off-by: Sawan Chandak <sawan.chandak@qlogic.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: James Bottomley <JBottomley@Odin.com>
Himanshu Madhani [Thu, 9 Apr 2015 19:00:05 +0000 (15:00 -0400)]
qla2xxx: Prevent multiple firmware dump collection for ISP27XX.
For ISP27XX, driver will capture new firmware dump even if there is
one already collected. Prevent this from happening by checking
fw_dumped flag.
Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: James Bottomley <JBottomley@Odin.com>
Himanshu Madhani [Thu, 9 Apr 2015 19:00:04 +0000 (15:00 -0400)]
qla2xxx: Disable Interrupt handshake for ISP27XX.
Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: James Bottomley <JBottomley@Odin.com>
Himanshu Madhani [Thu, 9 Apr 2015 19:00:03 +0000 (15:00 -0400)]
qla2xxx: Add debugging info for MBX timeout.
Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: James Bottomley <JBottomley@Odin.com>
Andrew Vasquez [Thu, 9 Apr 2015 19:00:02 +0000 (15:00 -0400)]
qla2xxx: Add serdes read/write support for ISP27XX
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: Harish Zunjarrao <harish.zunjarrao@qlogic.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: James Bottomley <JBottomley@Odin.com>
Himanshu Madhani [Thu, 9 Apr 2015 19:00:01 +0000 (15:00 -0400)]
qla2xxx: Add udev notification to save fw dump for ISP27XX
Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: James Bottomley <JBottomley@Odin.com>
Himanshu Madhani [Thu, 9 Apr 2015 19:00:00 +0000 (15:00 -0400)]
qla2xxx: Add message for sucessful FW dump collected for ISP27XX.
o Added message indicating firmware dump was sucessfully collected
for ISP27XX.
o Improve logging to help debug firmware dump process for ISP27XX.
Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: James Bottomley <JBottomley@Odin.com>
Sawan Chandak [Thu, 9 Apr 2015 18:59:59 +0000 (14:59 -0400)]
qla2xxx: Add support to load firmware from file for ISP 26XX/27XX.
Signed-off-by: Sawan Chandak <sawan.chandak@qlogic.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: James Bottomley <JBottomley@Odin.com>
Nigel Kirkland [Thu, 9 Apr 2015 18:59:58 +0000 (14:59 -0400)]
qla2xxx: Fix beacon blink for ISP27XX.
Signed-off-by: Nigel Kirkland <nigel.kirkland@qlogic.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: James Bottomley <JBottomley@Odin.com>
Chad Dupuis [Thu, 9 Apr 2015 18:59:57 +0000 (14:59 -0400)]
qla2xxx: Increase the wait time for firmware to be ready for P3P.
Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: James Bottomley <JBottomley@Odin.com>
Himanshu Madhani [Thu, 9 Apr 2015 18:59:56 +0000 (14:59 -0400)]
qla2xxx: Fix crash due to wrong casting of reg for ISP27XX.
[Bart: additional sparse warning caused by this patch]
[jejb: fix sparse warning]
Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com>
Cc: Bart Van Assche <bart.vanassche@sandisk.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: James Bottomley <JBottomley@Odin.com>
Himanshu Madhani [Thu, 9 Apr 2015 18:59:55 +0000 (14:59 -0400)]
qla2xxx: Fix warnings reported by static checker.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: James Bottomley <JBottomley@Odin.com>
James Smart [Tue, 7 Apr 2015 19:07:29 +0000 (15:07 -0400)]
lpfc: Update version to 10.5.0.0 for upstream patch set
Update version to 10.5.0.0 for upstream patch set
Signed-off-by: Dick Kennedy <dick.kennedy@emulex.com>
Signed-off-by: James Smart <james.smart@emulex.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: James Bottomley <JBottomley@Odin.com>
James Smart [Tue, 7 Apr 2015 19:07:28 +0000 (15:07 -0400)]
lpfc: Update copyright to 2015
Update copyright to 2015
Signed-off-by: Dick Kennedy <dick.kennedy@emulex.com>
Signed-off-by: James Smart <james.smart@emulex.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: James Bottomley <JBottomley@Odin.com>
James Smart [Tue, 7 Apr 2015 19:07:27 +0000 (15:07 -0400)]
lpfc: Fix for lun discovery issue with saturn adapter.
FCP_CMD payload was not always properly initialized on SLI-3 devices.
Signed-off-by: Dick Kennedy <dick.kennedy@emulex.com>
Signed-off-by: James Smart <james.smart@emulex.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: James Bottomley <JBottomley@Odin.com>
James Smart [Tue, 7 Apr 2015 19:07:26 +0000 (15:07 -0400)]
lpfc: Fix crash in device reset handler.
Signed-off-by: Dick Kennedy <dick.kennedy@emulex.com>
Signed-off-by: James Smart <james.smart@emulex.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: James Bottomley <JBottomley@Odin.com>
James Smart [Tue, 7 Apr 2015 19:07:25 +0000 (15:07 -0400)]
lpfc: Fix OS crash when running loopback test in applications
Signed-off-by: Dick Kennedy <dick.kennedy@emulex.com>
Signed-off-by: James Smart <james.smart@emulex.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: James Bottomley <JBottomley@Odin.com>
James Smart [Tue, 7 Apr 2015 19:07:23 +0000 (15:07 -0400)]
lpfc: Fix internal loopback failure.
Signed-off-by: Dick Kennedy <dick.kennedy@emulex.com>
Signed-off-by: James Smart <james.smart@emulex.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: James Bottomley <JBottomley@Odin.com>
James Smart [Tue, 7 Apr 2015 19:07:22 +0000 (15:07 -0400)]
lpfc: Fix premature release of rpi bit in bitmask
Currently, the driver plays off the fact that older sli4 adapters have a
different rpi access pattern that allowed for the rpi reference to be
released earlier in the teardown sequence, allowing the driver to recycle
the rpi value sooner. Newer sli4 adapters have a different access pattern that
requires us to wait for a later mailbox completion. This changes the put
call location on the newer sli4 adapters.
Symptoms of the error are "0110 ELS" and the "0372 iotag" errors.
Signed-off-by: Dick Kennedy <dick.kennedy@emulex.com>
Signed-off-by: James Smart <james.smart@emulex.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: James Bottomley <JBottomley@Odin.com>
James Smart [Tue, 7 Apr 2015 19:07:21 +0000 (15:07 -0400)]
lpfc: Initiator sends wrong BBCredit value for either FLOGI or FLOGI_ACC
Signed-off-by: Dick Kennedy <dick.kennedy@emulex.com>
Signed-off-by: James Smart <james.smart@emulex.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: James Bottomley <JBottomley@Odin.com>
James Smart [Tue, 7 Apr 2015 19:07:20 +0000 (15:07 -0400)]
lpfc: Fix null ndlp dereference in target_reset_handler
Signed-off-by: Dick Kennedy <dick.kennedy@emulex.com>
Signed-off-by: James Smart <james.smart@emulex.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: James Bottomley <JBottomley@Odin.com>
James Smart [Tue, 7 Apr 2015 19:07:19 +0000 (15:07 -0400)]
lpfc: Fix FDMI Fabric support in driver for Brocade
Signed-off-by: Dick Kennedy <dick.kennedy@emulex.com>
Signed-off-by: James Smart <james.smart@emulex.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: James Bottomley <JBottomley@Odin.com>
James Smart [Tue, 7 Apr 2015 19:07:18 +0000 (15:07 -0400)]
lpfc: Fix provide host name and OS name in RSNN-NN FC-GS command
Signed-off-by: Dick Kennedy <dick.kennedy@emulex.com>
Signed-off-by: James Smart <james.smart@emulex.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: James Bottomley <JBottomley@Odin.com>
James Smart [Tue, 7 Apr 2015 19:07:17 +0000 (15:07 -0400)]
lpfc: Parse the new 20G, 25G and 40G link speeds in the lpfc driver
Signed-off-by: Dick Kennedy <dick.kennedy@emulex.com>
Signed-off-by: James Smart <james.smart@emulex.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: James Bottomley <JBottomley@Odin.com>
James Smart [Tue, 7 Apr 2015 19:07:16 +0000 (15:07 -0400)]
lpfc: Add support for reporting option_rom_version on newer adapters
Signed-off-by: Dick Kennedy <dick.kennedy@emulex.com>
Signed-off-by: James Smart <james.smart@emulex.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: James Bottomley <JBottomley@Odin.com>
James Smart [Tue, 7 Apr 2015 19:07:15 +0000 (15:07 -0400)]
lpfc: Fix setting of EQ (interrupt) delay Multiplier
Signed-off-by: Dick Kennedy <dick.kennedy@emulex.com>
Signed-off-by: James Smart <james.smart@emulex.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: James Bottomley <JBottomley@Odin.com>
James Smart [Tue, 7 Apr 2015 19:07:13 +0000 (15:07 -0400)]
lpfc: Fix host reset escalation killing all IOs.
Fix host reset escalation killing all IOs.
SLI-3 adapters will use a new host template. The template differs
from SLI-4 adapters in that it does not have an eh_host_reset_handler.
Lpfc has traditionally never had a host_reset. The host reset
handler was added when we ran into a stuck hardware condition on a
SLI-4 adapter. The host_reset will reset and reinit the pci function,
clearing the hardware condition.
Unfortunately, the host reset handler uses attach/detach code paths,
which makes scsi_add_host() and scsi_remove_host() calls. Meaning, a
host_reset will completely remove the scsi_host from the system. As a
new call to scsi_add_host() is made, the shost# changes, which results
in completely new scsi_devices and device names. All the older scsi
devices on the old shost# are now orphaned and unrecoverable.
We realize we need to re-implement the host_reset_handler so the scsi_host
stays registered across the host_reset, but that will be a rather
lengthy effort. In the short term, we had an immediate need to restore
the SLI-3 devices to their working behavior, with the easiest path being
to remove their host_reset handler.
Signed-off-by: Dick Kennedy <dick.kennedy@emulex.com>
Signed-off-by: James Smart <james.smart@emulex.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: James Bottomley <JBottomley@Odin.com>
James Smart [Tue, 7 Apr 2015 19:07:12 +0000 (15:07 -0400)]
lpfc: Linux lpfc driver doesn't re-establish the link after a cable pull on LPe12002
Signed-off-by: Dick Kennedy <dick.kennedy@emulex.com>
Signed-off-by: James Smart <james.smart@emulex.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: James Bottomley <JBottomley@Odin.com>
James Smart [Tue, 7 Apr 2015 19:07:11 +0000 (15:07 -0400)]
lpfc: Fix to handle PLOGI when already logged in
Signed-off-by: Dick Kennedy <dick.kennedy@emulex.com>
Signed-off-by: James Smart <james.smart@emulex.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: James Bottomley <JBottomley@Odin.com>
James Smart [Tue, 7 Apr 2015 19:07:10 +0000 (15:07 -0400)]
lpfc: Add new mbx cmd recognition
Signed-off-by: Dick Kennedy <dick.kennedy@emulex.com>
Signed-off-by: James Smart <james.smart@emulex.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: James Bottomley <JBottomley@Odin.com>
James Smart [Tue, 7 Apr 2015 19:07:09 +0000 (15:07 -0400)]
lpfc: Add Lancer Temperature Event support to the lpfc driver
This will detect and send an async event if overtemp is detected
Signed-off-by: Dick Kennedy <dick.kennedy@emulex.com>
Signed-off-by: James Smart <james.smart@emulex.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: James Bottomley <JBottomley@Odin.com>
James Smart [Tue, 7 Apr 2015 19:07:08 +0000 (15:07 -0400)]
lpfc: Fix the iteration count to match the 30 sec comment in the routine lpfc_pci_function_reset
Signed-off-by: Dick Kennedy <dick.kennedy@emulex.com>
Signed-off-by: James Smart <james.smart@emulex.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: James Bottomley <JBottomley@Odin.com>
James Smart [Thu, 2 Apr 2015 19:50:52 +0000 (15:50 -0400)]
scsi_transport_fc: Add support for 25Gbit speed
Signed-off-by: James Smart <james.smart@emulex.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Ewan D. Milne <emilne@redhat.com>
Signed-off-by: James Bottomley <JBottomley@Odin.com>
Ondrej Zary [Fri, 6 Feb 2015 22:11:57 +0000 (23:11 +0100)]
aha1542: remove loop from aha1542_outb
The loop in aha1542_outb with double-check is no longer needed, remove it.
Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: James Bottomley <JBottomley@Odin.com>
Ondrej Zary [Fri, 6 Feb 2015 22:11:56 +0000 (23:11 +0100)]
aha1542: Fix bus reset
Bus reset always fails because aha1542_reset waits for the controller to assert
the INIT bit (Mailbox Initialization Required) which it never does. This bit is
asserted only after host reset.
Remove the requirement for INIT bit (we really need only the IDLE bit).
Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: James Bottomley <JBottomley@Odin.com>
Ondrej Zary [Fri, 6 Feb 2015 22:11:55 +0000 (23:11 +0100)]
aha1542: rework locking
Remove aha1542_lock and use host_lock instead.
Remove interrupt and queuecommand function wrappers.
Remove locking from lowlevel _out and _in functions, they now can
onle be called (at runtime) with host_lock being held.
Remove ssleep(4) in aha1542_reset as we can't sleep while holding a spinlock.
It's useless anyway as wait_mask will wait until the controller is idle and
kernel waits for 10 seconds (HOST_RESET_SETTLE_TIME) after that.
Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: James Bottomley <JBottomley@Odin.com>
Ondrej Zary [Fri, 6 Feb 2015 22:11:54 +0000 (23:11 +0100)]
aha1542: Don't reduce functionality with DEBUG enabled
Enabling DEBUG disables write commands and devices with ID > 1.
Remove this "feature" to allow real debugging.
Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: James Bottomley <JBottomley@Odin.com>
Ondrej Zary [Fri, 6 Feb 2015 22:11:53 +0000 (23:11 +0100)]
aha1542: Use print_hex_dump_bytes in debug code
Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: James Bottomley <JBottomley@Odin.com>
Ondrej Zary [Fri, 6 Feb 2015 22:11:52 +0000 (23:11 +0100)]
aha1542: remove DEB macro and simplify debug code
Remove DEB macro and join ifdef DEBUG blocks
Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: James Bottomley <JBottomley@Odin.com>
Ondrej Zary [Fri, 6 Feb 2015 22:11:51 +0000 (23:11 +0100)]
aha1542: Use shost_printk instead of printk
Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: James Bottomley <JBottomley@Odin.com>
Ondrej Zary [Fri, 6 Feb 2015 22:11:50 +0000 (23:11 +0100)]
aha1542: Change aha1542_set_bus_times parameters
Pass struct Scsi_Host *sh and dma parameters instead of index to
aha1542_set_bus_times.
This is required for printk conversion.
Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: James Bottomley <JBottomley@Odin.com>
Ondrej Zary [Fri, 6 Feb 2015 22:11:49 +0000 (23:11 +0100)]
aha1542: Pass struct Scsi_Host * to functions
Pass struct Scsi_Host * to functions instead of base address.
This reduces the number of parameters and is also required for printk
conversion.
Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: James Bottomley <JBottomley@Odin.com>
Ondrej Zary [Fri, 6 Feb 2015 22:11:48 +0000 (23:11 +0100)]
aha1542: cleanup includes
Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: James Bottomley <JBottomley@Odin.com>
Ondrej Zary [Fri, 6 Feb 2015 22:11:47 +0000 (23:11 +0100)]
aha1542: remove useless changelog
Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: James Bottomley <JBottomley@Odin.com>
Ondrej Zary [Fri, 6 Feb 2015 22:11:46 +0000 (23:11 +0100)]
aha1542: fix include guard and remove useless changelog
Fix include guard in header file and remove useless changelog
Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: James Bottomley <JBottomley@Odin.com>
Ondrej Zary [Fri, 6 Feb 2015 22:11:45 +0000 (23:11 +0100)]
aha1542: Always name Scsi_Host variables sh
Make Scsi_Host variable names consistent - use sh everywhere.
Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: James Bottomley <JBottomley@Odin.com>
Ondrej Zary [Fri, 6 Feb 2015 22:11:44 +0000 (23:11 +0100)]
aha1524: Use struct scsi_cmnd
Use struct scsi_cmnd instead of Scsi_Cmnd and also rename the variables
to get rid of SC prefix
Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: James Bottomley <JBottomley@Odin.com>
Ondrej Zary [Fri, 6 Feb 2015 22:11:43 +0000 (23:11 +0100)]
aha1542: clean up cmd variables
Make sure that there's no variable named cmd
Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: James Bottomley <JBottomley@Odin.com>
Ondrej Zary [Fri, 6 Feb 2015 22:11:42 +0000 (23:11 +0100)]
aha1542: Simplify aha1542_biosparam
Simplify aha1542_biosparam, use sector_div, remove unused BIOS_TRANSLATION_1632.
Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: James Bottomley <JBottomley@Odin.com>
Ondrej Zary [Fri, 6 Feb 2015 22:11:41 +0000 (23:11 +0100)]
aha1542: rework configuration parameters
Remove __setup and introduce separate io, bus_on, bus_off and dma_speed
module parameters.
Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: James Bottomley <JBottomley@Odin.com>
Ondrej Zary [Fri, 6 Feb 2015 22:11:40 +0000 (23:11 +0100)]
aha1542: rework hw_init
Cleanup hw_init, use goto for error handling.
Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: James Bottomley <JBottomley@Odin.com>
Ondrej Zary [Fri, 6 Feb 2015 22:11:39 +0000 (23:11 +0100)]
aha1542: Call wait_mask from aha1542_out
aha1542_out call is always followed by wait_mask.
Move the call into aha1542_out to simplify code.
Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: James Bottomley <JBottomley@Odin.com>
Ondrej Zary [Fri, 6 Feb 2015 22:11:38 +0000 (23:11 +0100)]
aha1542: split out code from aha1542_hw_init
Split out bus times related block of aha1542_hw_init into separate function
aha1542_set_bus_times.
Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: James Bottomley <JBottomley@Odin.com>
Ondrej Zary [Fri, 6 Feb 2015 22:11:37 +0000 (23:11 +0100)]
aha1542: Merge aha1542_host_reset and aha1542_bus_reset
aha1542_host_reset and aha1542_bus_reset are almost same, merge them
into aha1542_reset
Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: James Bottomley <JBottomley@Odin.com>
Ondrej Zary [Fri, 6 Feb 2015 22:11:36 +0000 (23:11 +0100)]
aha1542: Remove aha1542_restart
aha1542_restart does nothing (except useless printk), remove it
Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: James Bottomley <JBottomley@Odin.com>
Ondrej Zary [Fri, 6 Feb 2015 22:11:35 +0000 (23:11 +0100)]
aha1542: remove useless code from aha1542_test_port
Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: James Bottomley <JBottomley@Odin.com>
Ondrej Zary [Fri, 6 Feb 2015 22:11:34 +0000 (23:11 +0100)]
aha1542: Remove unneeded gotos
Remove gotos that are no longer needed.
Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: James Bottomley <JBottomley@Odin.com>
Ondrej Zary [Fri, 6 Feb 2015 22:11:33 +0000 (23:11 +0100)]
aha1542: Split aha1542_out
aha1542_out are in fact two separate functions.
Split them into aha1542_out and aha1542_outb to simplify the code.
Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: James Bottomley <JBottomley@Odin.com>
Ondrej Zary [Fri, 6 Feb 2015 22:11:32 +0000 (23:11 +0100)]
aha1542: Unify aha1542_in and aha1542_in1
Unify aha1542_in and aha1542_in1 functions, they differ only in timeout
and printk.
Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: James Bottomley <JBottomley@Odin.com>
Ondrej Zary [Fri, 6 Feb 2015 22:11:31 +0000 (23:11 +0100)]
aha1542: Remove WAIT and WAITd macros
Convert the ugly WAIT and WAITd macros into wait_mask function.
Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: James Bottomley <JBottomley@Odin.com>
Ondrej Zary [Fri, 6 Feb 2015 22:11:30 +0000 (23:11 +0100)]
aha1542: Use BIT() macro
Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: James Bottomley <JBottomley@Odin.com>
Ondrej Zary [Fri, 6 Feb 2015 22:11:29 +0000 (23:11 +0100)]
aha1542: remove empty aha1542_stat
Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: James Bottomley <JBottomley@Odin.com>
Ondrej Zary [Fri, 6 Feb 2015 22:11:28 +0000 (23:11 +0100)]
aha1542: Reorder functions to remove forward declarations
Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: James Bottomley <JBottomley@Odin.com>
Ondrej Zary [Fri, 6 Feb 2015 22:11:27 +0000 (23:11 +0100)]
aha1542: Use u8 instead of unchar
Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: James Bottomley <JBottomley@Odin.com>
Ondrej Zary [Fri, 6 Feb 2015 22:11:26 +0000 (23:11 +0100)]
aha1542: Convert aha1542_intr_reset to function
Convert aha1542_intr_reset macro to inline function
Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: James Bottomley <JBottomley@Odin.com>
Ondrej Zary [Fri, 6 Feb 2015 22:11:25 +0000 (23:11 +0100)]
aha1542: Remove HOSTDATA macro
Remove HOSTDATA macro and use shost_priv instead
Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: James Bottomley <JBottomley@Odin.com>
Ondrej Zary [Fri, 6 Feb 2015 22:11:24 +0000 (23:11 +0100)]
aha1542: Remove SCSI_BUF_PA, SCSI_SG_PA, AHA1542_SCATTER and AHA1542_CMDLUN
Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: James Bottomley <JBottomley@Odin.com>
Ondrej Zary [Fri, 6 Feb 2015 22:11:23 +0000 (23:11 +0100)]
aha1542: remove dead code
Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: James Bottomley <JBottomley@Odin.com>
Ondrej Zary [Fri, 6 Feb 2015 22:11:22 +0000 (23:11 +0100)]
aha1542: Stop using scsi_module.c
Convert aha1542 to use scsi_add_host instead of scsi_module.c
Use pnp_driver and isa_driver to manage cards.
Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: James Bottomley <JBottomley@Odin.com>
Mahesh Rajashekhara [Thu, 26 Mar 2015 14:41:32 +0000 (10:41 -0400)]
aacraid: driver version change
Signed-off-by: Mahesh Rajashekhara <Mahesh.Rajashekhara@pmcs.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Murthy Bhat <Murthy.Bhat@pmcs.com>
Signed-off-by: James Bottomley <JBottomley@Odin.com>
Mahesh Rajashekhara [Thu, 26 Mar 2015 14:41:31 +0000 (10:41 -0400)]
aacraid: AIF raw device remove support
Signed-off-by: Mahesh Rajashekhara <Mahesh.Rajashekhara@pmcs.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Murthy Bhat <Murthy.Bhat@pmcs.com>
Signed-off-by: James Bottomley <JBottomley@Odin.com>
Mahesh Rajashekhara [Thu, 26 Mar 2015 14:41:30 +0000 (10:41 -0400)]
aacraid: performance improvement changes
Signed-off-by: Mahesh Rajashekhara <Mahesh.Rajashekhara@pmcs.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Murthy Bhat <Murthy.Bhat@pmcs.com>
Signed-off-by: James Bottomley <JBottomley@Odin.com>
Mahesh Rajashekhara [Thu, 26 Mar 2015 14:41:29 +0000 (10:41 -0400)]
aacraid: IOCTL fix
After getting the platform shutdown command "VM_CloseAll" response from the
firmware, driver was getting configuration IOCTL request from the upper layers
and it sends down to firmware. This causes firmware assert issue.
This patch fixes the firmware assert issue. During the shutdown, if driver
gets commands from the upper layer, driver sends error code to the upper
layers.
Signed-off-by: Mahesh Rajashekhara <Mahesh.Rajashekhara@pmcs.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Murthy Bhat <Murthy.Bhat@pmcs.com>
Signed-off-by: James Bottomley <JBottomley@Odin.com>
Mahesh Rajashekhara [Thu, 26 Mar 2015 14:41:28 +0000 (10:41 -0400)]
aacraid: IOP RESET command handling changes
This patch fixes the IOP_RESET issue. Sending IOP_RESET command need to wait
for only 10 sec instead of 5 minutes in case of firmware does not response
IOP_RESET command. Disable interrupt before setup interrupt routine to
prevent spurious interrupts.
Signed-off-by: Mahesh Rajashekhara <Mahesh.Rajashekhara@pmcs.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Murthy Bhat <Murthy.Bhat@pmcs.com>
Signed-off-by: James Bottomley <JBottomley@Odin.com>
Mahesh Rajashekhara [Thu, 26 Mar 2015 14:41:27 +0000 (10:41 -0400)]
aacraid: 240 simple volume support
Signed-off-by: Mahesh Rajashekhara <Mahesh.Rajashekhara@pmcs.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Murthy Bhat <Murthy.Bhat@pmcs.com>
Signed-off-by: James Bottomley <JBottomley@Odin.com>
Mahesh Rajashekhara [Thu, 26 Mar 2015 14:41:26 +0000 (10:41 -0400)]
aacraid: vpd page code 0x83 support
Signed-off-by: Mahesh Rajashekhara <Mahesh.Rajashekhara@pmcs.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Murthy Bhat <Murthy.Bhat@pmcs.com>
Signed-off-by: James Bottomley <JBottomley@Odin.com>
Mahesh Rajashekhara [Thu, 26 Mar 2015 14:41:25 +0000 (10:41 -0400)]
aacraid: MSI-x support
Signed-off-by: Mahesh Rajashekhara <Mahesh.Rajashekhara@pmcs.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Murthy Bhat <Murthy.Bhat@pmcs.com>
Signed-off-by: James Bottomley <JBottomley@Odin.com>
Mahesh Rajashekhara [Thu, 26 Mar 2015 14:41:24 +0000 (10:41 -0400)]
aacraid: 4KB sector support
Also fix up a name truncation problem
Signed-off-by: Mahesh Rajashekhara <Mahesh.Rajashekhara@pmcs.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Murthy Bhat <Murthy.Bhat@pmcs.com>
Signed-off-by: James Bottomley <JBottomley@Odin.com>
Mahesh Rajashekhara [Thu, 26 Mar 2015 14:41:23 +0000 (10:41 -0400)]
aacraid: IOCTL pass-through command fix
The Linux aacriad driver fails to detect the case of SG list count=0 on IOCTL
pass-through command and cause intermittent fault. The result is the Linux
aacriad driver send down IOCTL pass-through command with one not initialized
SG list to firmware when receiving SG list count =0 on pass-through command.
Signed-off-by: Mahesh Rajashekhara <Mahesh.Rajashekhara@pmcs.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Murthy Bhat <Murthy.Bhat@pmcs.com>
Signed-off-by: James Bottomley <JBottomley@Odin.com>
Mahesh Rajashekhara [Thu, 26 Mar 2015 14:41:22 +0000 (10:41 -0400)]
aacraid: AIF support for SES device add/remove
Signed-off-by: Mahesh Rajashekhara <Mahesh.Rajashekhara@pmcs.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Murthy Bhat <Murthy.Bhat@pmcs.com>
Signed-off-by: James Bottomley <JBottomley@Odin.com>
Brian King [Thu, 26 Mar 2015 16:24:00 +0000 (11:24 -0500)]
ipr: Driver version 2.6.1
Signed-off-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: James Bottomley <JBottomley@Odin.com>
Wen Xiong [Thu, 26 Mar 2015 16:23:58 +0000 (11:23 -0500)]
ipr: AF DASD raw mode implementation in ipr driver
This patch implements raw mode support for AF DASD in ipr driver
which allows for tools to send commands directly to physical
devices which are members of RAID arrays when enabled in the firmware.
[jejb: fix up whitespace]
Signed-off-by: Wen Xiong<wenxiong@linux.vnet.ibm.com>
Signed-off-by: Brian King <brking@linux.vnet.ibm.com>
Reviewed-by: Daniel Kreling <kreling@linux.vnet.ibm.com>
Signed-off-by: James Bottomley <JBottomley@Odin.com>
Brian King [Thu, 26 Mar 2015 16:23:56 +0000 (11:23 -0500)]
ipr: Re-enable write same
Re-enable write same support for ipr RAID adapters.
Signed-off-by: Brian King <brking@linux.vnet.ibm.com>
Reviewed-by: Wen Xiong <wenxiong@linux.vnet.ibm.com>
Reviewed-by: Daniel Kreling <kreling@linux.vnet.ibm.com>
Signed-off-by: James Bottomley <JBottomley@Odin.com>
Brian King [Thu, 26 Mar 2015 16:23:55 +0000 (11:23 -0500)]
ipr: Fix possible error path oops during initialization
Fixes a possible oops during adapter initialization in some
memory allocation failure error paths scenarios.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Brian King <brking@linux.vnet.ibm.com>
Reviewed-by: Wen Xiong <wenxiong@linux.vnet.ibm.com>
Reviewed-by: Daniel Kreling <kreling@linux.vnet.ibm.com>
Signed-off-by: James Bottomley <JBottomley@Odin.com>
Brian King [Thu, 26 Mar 2015 16:23:52 +0000 (11:23 -0500)]
ipr: Reset in task context
The pci_set_pcie_reset_state has changed semantics to not be callable
from interrupt context, so change ipr's usage of the API to comply with
this change by ensuring this occurs from a workqueue.
Signed-off-by: Brian King <brking@linux.vnet.ibm.com>
Reviewed-by: Wen Xiong <wenxiong@linux.vnet.ibm.com>
Reviewed-by: Daniel Kreling <kreling@linux.vnet.ibm.com>
Signed-off-by: James Bottomley <JBottomley@Odin.com>
Brian King [Thu, 26 Mar 2015 16:23:50 +0000 (11:23 -0500)]
ipr: Reboot speed improvements
Currently when performing a reboot with an ipr adapter,
the adapter gets shutdown completely, flushing all write
cache, as well as performing a full hardware reset of the card
during the shutdown phase of the old kernel. This ensures
the adapter is in a fully quiesced state across the reboot.
There are scenarios, however, such as when performing
kexec, where this full adapter shutdown is not required
and not desired, since it can make the reboot process take
noticeably longer.
This patch adds a module parameter to allow for skipping the
full shutdown during reboot. Rather than performing a full
adapter shutdown and reset, we simply cancel any outstanding
error buffers, place the adapter into a state where it has no
memory of any DMA addresses from the old kernel, then disable
the device. This significantly speeds up kexec boot, particularly
in configurations with multiple ipr adapters.
Signed-off-by: Brian King <brking@linux.vnet.ibm.com>
Reviewed-by: Wen Xiong <wenxiong@linux.vnet.ibm.com>
Reviewed-by: Daniel Kreling <kreling@linux.vnet.ibm.com>
Signed-off-by: James Bottomley <JBottomley@Odin.com>
K. Y. Srinivasan [Fri, 27 Mar 2015 07:27:20 +0000 (00:27 -0700)]
scsi: storvsc: Set the tablesize based on the information given by the host
Set the tablesize based on the information given by the host.
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Reviewed-by: Long Li <longli@microsoft.com>
Tested-by: Long Li <longli@microsoft.com>
Signed-off-by: James Bottomley <JBottomley@Odin.com>
K. Y. Srinivasan [Fri, 27 Mar 2015 07:27:19 +0000 (00:27 -0700)]
scsi: storvsc: Don't assume that the scatterlist is not chained
The current code assumes that the scatterlists presented are not chained.
Fix the code to not make this assumption.
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Reviewed-by: Long Li <longli@microsoft.com>
Signed-off-by: James Bottomley <JBottomley@Odin.com>
K. Y. Srinivasan [Fri, 27 Mar 2015 07:27:18 +0000 (00:27 -0700)]
scsi: storvsc: Fix a bug in copy_from_bounce_buffer()
We may exit this function without properly freeing up the maapings
we may have acquired. Fix the bug.
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Reviewed-by: Long Li <longli@microsoft.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: James Bottomley <JBottomley@Odin.com>
projects / GitHub / LineageOS / android_kernel_motorola_exynos9610.git / log