GitHub/LineageOS/android_kernel_motorola_exynos9610.git
12 years agonet: Remove LL_ALLOCATED_SPACE
Herbert Xu [Fri, 18 Nov 2011 02:20:05 +0000 (02:20 +0000)]
net: Remove LL_ALLOCATED_SPACE

net: Remove LL_ALLOCATED_SPACE

The macro LL_ALLOCATED_SPACE was ill-conceived.  It applies the
alignment to the sum of needed_headroom and needed_tailroom.  As
the amount that is then reserved for head room is needed_headroom
with alignment, this means that the tail room left may be too small.

Now that all uses of LL_ALLOCATED_SPACE have been removed, this
patch finally removes the macro itself.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agonet: Remove all uses of LL_ALLOCATED_SPACE
Herbert Xu [Fri, 18 Nov 2011 02:20:04 +0000 (02:20 +0000)]
net: Remove all uses of LL_ALLOCATED_SPACE

net: Remove all uses of LL_ALLOCATED_SPACE

The macro LL_ALLOCATED_SPACE was ill-conceived.  It applies the
alignment to the sum of needed_headroom and needed_tailroom.  As
the amount that is then reserved for head room is needed_headroom
with alignment, this means that the tail room left may be too small.

This patch replaces all uses of LL_ALLOCATED_SPACE with the macro
LL_RESERVED_SPACE and direct reference to needed_tailroom.

This also fixes the problem with needed_headroom changing between
allocating the skb and reserving the head room.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agoipv6: Remove all uses of LL_ALLOCATED_SPACE
Herbert Xu [Fri, 18 Nov 2011 02:20:04 +0000 (02:20 +0000)]
ipv6: Remove all uses of LL_ALLOCATED_SPACE

ipv6: Remove all uses of LL_ALLOCATED_SPACE

The macro LL_ALLOCATED_SPACE was ill-conceived.  It applies the
alignment to the sum of needed_headroom and needed_tailroom.  As
the amount that is then reserved for head room is needed_headroom
with alignment, this means that the tail room left may be too small.

This patch replaces all uses of LL_ALLOCATED_SPACE in net/ipv6
with the macro LL_RESERVED_SPACE and direct reference to
needed_tailroom.

This also fixes the problem with needed_headroom changing between
allocating the skb and reserving the head room.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agoipv4: Remove all uses of LL_ALLOCATED_SPACE
Herbert Xu [Fri, 18 Nov 2011 02:20:04 +0000 (02:20 +0000)]
ipv4: Remove all uses of LL_ALLOCATED_SPACE

ipv4: Remove all uses of LL_ALLOCATED_SPACE

The macro LL_ALLOCATED_SPACE was ill-conceived.  It applies the
alignment to the sum of needed_headroom and needed_tailroom.  As
the amount that is then reserved for head room is needed_headroom
with alignment, this means that the tail room left may be too small.

This patch replaces all uses of LL_ALLOCATED_SPACE in net/ipv4
with the macro LL_RESERVED_SPACE and direct reference to
needed_tailroom.

This also fixes the problem with needed_headroom changing between
allocating the skb and reserving the head room.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agonet-forcedeth: fix possible stats inaccuracies on 32b hosts
david decotigny [Thu, 17 Nov 2011 09:38:23 +0000 (09:38 +0000)]
net-forcedeth: fix possible stats inaccuracies on 32b hosts

The software stats are updated from BH, this change ensures that 32b
UP hosts use appropriate protection.

Tested:
  - HW/SW stats consistent with pktgen (in particular tx=rx)
  - HW/SW stats consistent when tx/rx offloads disabled
  - no problem with+without lockdep (SMP 16-way)

Signed-off-by: David Decotigny <david.decotigny@google.com>
Acked-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agobnx2: switch to build_skb() infrastructure
Eric Dumazet [Tue, 15 Nov 2011 07:30:05 +0000 (07:30 +0000)]
bnx2: switch to build_skb() infrastructure

This is very similar to bnx2x conversion, but bnx2 only requires 16bytes
alignement at start of the received frame to store its l2_fhdr, so goal
was not to reduce skb truesize (in fact it should not change after this
patch)

Using build_skb() reduces cache line misses in the driver, since we
use cache hot skb instead of cold ones. Number of in-flight sk_buff
structures is lower, they are more likely recycled in SLUB caches
while still hot.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
CC: Michael Chan <mchan@broadcom.com>
CC: Eilon Greenstein <eilong@broadcom.com>
Reviewed-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agonet: use jump_label to shortcut RPS if not setup
Eric Dumazet [Thu, 17 Nov 2011 03:13:26 +0000 (03:13 +0000)]
net: use jump_label to shortcut RPS if not setup

Most machines dont use RPS/RFS, and pay a fair amount of instructions in
netif_receive_skb() / netif_rx() / get_rps_cpu() just to discover
RPS/RFS is not setup.

Add a jump_label named rps_needed.

If no device rps_map or global rps_sock_flow_table is setup,
netif_receive_skb() / netif_rx() do a single instruction instead of many
ones, including conditional jumps.

jmp +0    (if CONFIG_JUMP_LABEL=y)

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
CC: Tom Herbert <therbert@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agoibm/emac: fix improper cleanup when device is removed to allow re-bind
Wolfgang Grandegger [Thu, 17 Nov 2011 03:06:44 +0000 (03:06 +0000)]
ibm/emac: fix improper cleanup when device is removed to allow re-bind

The re-binding (unbind..bind) of an EMAC device fails because the
static variable "busy_phy_map" is not updated when the device is
removed.

Signed-off-by: Wolfgang Grandegger <wg@denx.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agoMerge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wirel...
John W. Linville [Thu, 17 Nov 2011 18:11:43 +0000 (13:11 -0500)]
Merge branch 'master' of git://git./linux/kernel/git/linville/wireless-next into for-davem

Conflicts:
include/net/bluetooth/bluetooth.h

12 years agoipv6: Use pr_warn() in ip6_fib.c
David S. Miller [Thu, 17 Nov 2011 08:18:28 +0000 (03:18 -0500)]
ipv6: Use pr_warn() in ip6_fib.c

Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agoIPV6 Fix a crash when trying to replace non existing route
Matti Vaittinen [Wed, 16 Nov 2011 21:18:02 +0000 (21:18 +0000)]
IPV6 Fix a crash when trying to replace non existing route

This patch fixes a crash when non existing IPv6 route is tried to be changed.

When new destination node was inserted in middle of FIB6 tree, no relevant
sanity checks were performed. Later route insertion might have been prevented
due to invalid request, causing node with no rt info being left in tree.
When this node was accessed, a crash occurred.

Patch adds missing checks in fib6_add_1()

Signed-off-by: Matti Vaittinen <Mazziesaccount@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agoforcedeth: stats updated with a deferrable timer
david decotigny [Wed, 16 Nov 2011 12:15:15 +0000 (12:15 +0000)]
forcedeth: stats updated with a deferrable timer

Mark stats timer as deferrable: punctuality in waking the stats timer
callback doesn't matter much, as it is responsible only to avoid
integer wraparound.

We need at least 1 other timer to fire within 17s (fully loaded 1Gbps)
to avoid wrap-arounds. Desired period is still 10s.

Signed-off-by: David Decotigny <david.decotigny@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agoforcedeth: account for dropped RX frames
david decotigny [Wed, 16 Nov 2011 12:15:14 +0000 (12:15 +0000)]
forcedeth: account for dropped RX frames

This adds code to update the stats counter for dropped RX frames.

Signed-off-by: David Decotigny <david.decotigny@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agoforcedeth: implement ndo_get_stats64() API
david decotigny [Wed, 16 Nov 2011 12:15:13 +0000 (12:15 +0000)]
forcedeth: implement ndo_get_stats64() API

This commit implements the ndo_get_stats64() API for forcedeth. Since
hardware stats are being updated from different contexts (process and
timer), this commit adds synchronization. For software stats, it
relies on the u64_stats_sync.h API.

Tested:
  - 16-way SMP x86_64 ->
    RX bytes:7244556582 (7.2 GB)  TX bytes:181904254 (181.9 MB)
  - pktgen + loopback: identical rx_bytes/tx_bytes and rx_packets/tx_packets

Signed-off-by: David Decotigny <david.decotigny@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agoforcedeth: allow to silence "TX timeout" debug messages
Sameer Nanda [Wed, 16 Nov 2011 12:15:12 +0000 (12:15 +0000)]
forcedeth: allow to silence "TX timeout" debug messages

This adds a new module parameter "debug_tx_timeout" to silence most
debug messages in case of TX timeout. These messages don't provide a
signal/noise ratio high enough for production systems and, with ~30kB
logged each time, they tend to add to a cascade effect if the system
is already under stress (memory pressure, disk, etc.).

By default, the parameter is clear, meaning that only a single warning
will be reported.

Signed-off-by: David Decotigny <david.decotigny@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agoforcedeth: Add messages to indicate using MSI or MSI-X
Mike Ditto [Wed, 16 Nov 2011 12:15:11 +0000 (12:15 +0000)]
forcedeth: Add messages to indicate using MSI or MSI-X

This adds a few kernel messages to indicate whether PCIe interrupts
are signaled with MSI or MSI-X.

Signed-off-by: David Decotigny <david.decotigny@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agonet: new counter for tx_timeout errors in sysfs
david decotigny [Wed, 16 Nov 2011 12:15:10 +0000 (12:15 +0000)]
net: new counter for tx_timeout errors in sysfs

This adds the /sys/class/net/DEV/queues/Q/tx_timeout attribute
containing the total number of timeout events on the given queue. It
is always available with CONFIG_SYSFS, independently of
CONFIG_RPS/XPS.

Credits to Stephen Hemminger for a preliminary version of this patch.

Tested:
  without CONFIG_SYSFS (compilation only)
  with sysfs and without CONFIG_RPS & CONFIG_XPS
  with sysfs and without CONFIG_RPS
  with sysfs and without CONFIG_XPS
  with defaults

Signed-off-by: David Decotigny <david.decotigny@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agonet-sysfs: fixed minor sparse warning
david decotigny [Wed, 16 Nov 2011 12:15:08 +0000 (12:15 +0000)]
net-sysfs: fixed minor sparse warning

This commit fixes following warning:
net/core/net-sysfs.c:921:6: warning: symbol 'numa_node' shadows an earlier one
include/linux/topology.h:222:1: originally declared here

Signed-off-by: David Decotigny <david.decotigny@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agoforcedeth: fix stats on hardware without extended stats support
david decotigny [Wed, 16 Nov 2011 12:15:07 +0000 (12:15 +0000)]
forcedeth: fix stats on hardware without extended stats support

This change makes sure that tx_packets/rx_bytes ifconfig counters are
updated even on NICs that don't provide hardware support for these
stats: they are now updated in software. For the sake of consistency,
we also now have tx_bytes updated in software (hardware counters
include ethernet CRC, and software doesn't account for it).

This reverts parts of:
 - "forcedeth: statistics optimization" (21828163b2)
 - "forcedeth: Improve stats counters" (0bdfea8ba8)
 - "forcedeth: remove unneeded stats updates" (4687f3f364)

Tested:
  pktgen + loopback (http://patchwork.ozlabs.org/patch/124698/)
  reports identical tx_packets/rx_packets and tx_bytes/rx_bytes.

Signed-off-by: David Decotigny <david.decotigny@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
(cherry picked from commit 898bdf2cb43eb0a962c397eb4dd1aec2c7211be2)

12 years agonet: verify GSO flag bits against netdev features
Michał Mirosław [Wed, 16 Nov 2011 14:05:33 +0000 (14:05 +0000)]
net: verify GSO flag bits against netdev features

Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agonet: drivers: use bool type instead of double negation
Michał Mirosław [Wed, 16 Nov 2011 14:05:33 +0000 (14:05 +0000)]
net: drivers: use bool type instead of double negation

Save some punctuation by using bool type's property equivalent to
doubled negation operator.

Reported-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agonet: ethtool: fix coding style
Michał Mirosław [Wed, 16 Nov 2011 14:32:03 +0000 (14:32 +0000)]
net: ethtool: fix coding style

Add missing spaces around multiplication operator.

Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agoucc_geth: Convert ENET_NUM_OCTETS_PER_ADDRESS uses to ETH_ALEN
Joe Perches [Wed, 16 Nov 2011 09:38:06 +0000 (09:38 +0000)]
ucc_geth: Convert ENET_NUM_OCTETS_PER_ADDRESS uses to ETH_ALEN

Reduce the number of #defines, use the normal #define from if_ether.h

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agoamd8111e: Convert ETH_ADDR_LEN uses to ETH_ALEN
Joe Perches [Wed, 16 Nov 2011 09:38:05 +0000 (09:38 +0000)]
amd8111e: Convert ETH_ADDR_LEN uses to ETH_ALEN

Reduce the number of #defines, use the normal #define from if_ether.h

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agobna: Convert MAC_ADDRLEN uses to ETH_ALEN
Joe Perches [Wed, 16 Nov 2011 09:38:04 +0000 (09:38 +0000)]
bna: Convert MAC_ADDRLEN uses to ETH_ALEN

Reduce the number of #defines, use the normal #define from if_ether.h

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agoethernet: Convert ETHER_ADDR_LEN uses to ETH_ALEN
Joe Perches [Wed, 16 Nov 2011 09:38:03 +0000 (09:38 +0000)]
ethernet: Convert ETHER_ADDR_LEN uses to ETH_ALEN

Reduce the number of #defines, use the normal #define from if_ether.h

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agoethernet: Convert MAC_ADDR_LEN uses to ETH_ALEN
Joe Perches [Wed, 16 Nov 2011 09:38:02 +0000 (09:38 +0000)]
ethernet: Convert MAC_ADDR_LEN uses to ETH_ALEN

Reduce the number of #defines, use the normal #define from if_ether.h

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agonet: Add ethtool to mii advertisment conversion helpers
Matt Carlson [Wed, 16 Nov 2011 23:36:59 +0000 (18:36 -0500)]
net: Add ethtool to mii advertisment conversion helpers

Translating between ethtool advertisement settings and MII
advertisements are common operations for ethernet drivers.  This patch
adds a set of helper functions that implements the conversion.  The
patch then modifies a couple of the drivers to use the new functions.

Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agoMerge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net...
David S. Miller [Wed, 16 Nov 2011 23:31:56 +0000 (18:31 -0500)]
Merge branch 'master' of git://git./linux/kernel/git/jkirsher/net-next

12 years agoteam: replicate options on register
Jiri Pirko [Wed, 16 Nov 2011 11:09:09 +0000 (11:09 +0000)]
team: replicate options on register

Since multiple team instances are putting defined options into their
option list, during register each option must be cloned before added
into list. This resolves uncool memory corruptions when using multiple
teams.

Signed-off-by: Jiri Pirko <jpirko@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agoteam: convert overall spinlock to mutex
Jiri Pirko [Wed, 16 Nov 2011 11:09:08 +0000 (11:09 +0000)]
team: convert overall spinlock to mutex

No need to have spinlock for this purpose. So convert this to mutex and
avoid current schedule while atomic problems in netlink code.

Signed-off-by: Jiri Pirko <jpirko@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agoteam: Do not hold rcu_read_lock when running netlink cmds
Jiri Pirko [Wed, 16 Nov 2011 11:55:54 +0000 (11:55 +0000)]
team: Do not hold rcu_read_lock when running netlink cmds

Signed-off-by: Jiri Pirko <jpirko@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
12 years ago6LoWPAN: double free in lowpan_fragment_xmit()
Dan Carpenter [Tue, 15 Nov 2011 22:36:43 +0000 (22:36 +0000)]
6LoWPAN: double free in lowpan_fragment_xmit()

dev_queue_xmit() consumes its own skb, so the call to dev_kfree_skb()
in lowpan_fragment_xmit() is a double free.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Alexander Smirnov <alex.bluesman.smirnov@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agobe2net: Use V1 query link status command for lancer
Padmanabh Ratnakar [Wed, 16 Nov 2011 02:03:45 +0000 (02:03 +0000)]
be2net: Use V1 query link status command for lancer

Use V1 version of query link status command for Lancer.

Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agobe2net: Fix VLAN promiscous mode for Lancer
Padmanabh Ratnakar [Wed, 16 Nov 2011 02:03:32 +0000 (02:03 +0000)]
be2net: Fix VLAN promiscous mode for Lancer

To enable VLAN promiscous mode, the HW interface should be created
with VLAN promiscous capability in Lancer. Add this capability during
creation of the HW interface.

Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agobe2net: Add EEPROM dump feature for Lancer
Padmanabh Ratnakar [Wed, 16 Nov 2011 02:03:07 +0000 (02:03 +0000)]
be2net: Add EEPROM dump feature for Lancer

Implemented eeprom dump using ethtool feature for Lancer.

Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agobe2net: add register dump feature for Lancer
Padmanabh Ratnakar [Wed, 16 Nov 2011 02:02:43 +0000 (02:02 +0000)]
be2net: add register dump feature for Lancer

Implement register dump using ethtool for Lancer.

Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agobe2net: Fix TX queue create for Lancer
Padmanabh Ratnakar [Wed, 16 Nov 2011 02:02:23 +0000 (02:02 +0000)]
be2net: Fix TX queue create for Lancer

Lancer uses V1 version of TXQ create. This command needs interface
id for TX queue creation. Rearrange code such that tx queue create
is after interface create. As TXQ create is now called after MCC
ring create use MCC instead of MBOX.

Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agoinfiniband: Update net drivers for netdev_features_t changes.
David S. Miller [Wed, 16 Nov 2011 23:05:50 +0000 (18:05 -0500)]
infiniband: Update net drivers for netdev_features_t changes.

Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agonet: remove NETIF_F_NO_CSUM feature bit
Michał Mirosław [Tue, 15 Nov 2011 15:29:55 +0000 (15:29 +0000)]
net: remove NETIF_F_NO_CSUM feature bit

Only distinct use is checking if NETIF_F_NOCACHE_COPY should be
enabled by default. The check heuristics is altered a bit here,
so it hits other people than before. The default shouldn't be
trusted for performance-critical cases anyway.

For all other uses NETIF_F_NO_CSUM is equivalent to NETIF_F_HW_CSUM.

Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agonet: extend netdev_features_t to 64 bits
Michał Mirosław [Tue, 15 Nov 2011 15:29:55 +0000 (15:29 +0000)]
net: extend netdev_features_t to 64 bits

Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agoethtool: prepare for larger netdev_features_t type
Michał Mirosław [Tue, 15 Nov 2011 15:29:55 +0000 (15:29 +0000)]
ethtool: prepare for larger netdev_features_t type

v2: changed loop in ethtool_set_features() per Ben's suggestion

Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agonet: ethtool: use C99 array initialization for feature-names table
Michał Mirosław [Tue, 15 Nov 2011 15:29:55 +0000 (15:29 +0000)]
net: ethtool: use C99 array initialization for feature-names table

Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agonet: Define enum for net device features.
Michał Mirosław [Tue, 15 Nov 2011 15:29:55 +0000 (15:29 +0000)]
net: Define enum for net device features.

Define feature values by bit position instead of direct 2**i values
and force the values to be of type netdev_features_t.

Cleaned and extended from patch by Mahesh Bandewar <maheshb@google.com>:
+ added netdev_features_t casts
+ included bits under NETIF_F_GSO_MASK
+ moved feature #defines out of struct net_device definition

Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agonet: introduce and use netdev_features_t for device features sets
Michał Mirosław [Tue, 15 Nov 2011 15:29:55 +0000 (15:29 +0000)]
net: introduce and use netdev_features_t for device features sets

v2: add couple missing conversions in drivers
split unexporting netdev_fix_features()
implemented %pNF
convert sock::sk_route_(no?)caps

Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agonet: split netdev features to separate header
Michał Mirosław [Tue, 15 Nov 2011 15:29:55 +0000 (15:29 +0000)]
net: split netdev features to separate header

Move features definitions to separate header so that linux/skbuff.h won't
need to include linux/netdevice.h after netdev_features_t is introduced.

Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Acked-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agonet: ethtool: break association of ETH_FLAG_* with NETIF_F_*
Michał Mirosław [Tue, 15 Nov 2011 15:29:55 +0000 (15:29 +0000)]
net: ethtool: break association of ETH_FLAG_* with NETIF_F_*

This is the only place left where dev->features are directly
exposed to userspace.

I know checkpatch.pl complains about __ethtool_{get,set}_flags(), but
the code is easier to read this way.

Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Acked-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agonet: remove legacy ethtool ops
Michał Mirosław [Tue, 15 Nov 2011 15:29:55 +0000 (15:29 +0000)]
net: remove legacy ethtool ops

As all drivers are converted, we may now remove discrete offload setting
callback handling.

Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Acked-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agonet: sweep-up some straglers in strlcpy conversion of .get_drvinfo routines
Rick Jones [Tue, 15 Nov 2011 14:59:53 +0000 (14:59 +0000)]
net: sweep-up some straglers in strlcpy conversion of .get_drvinfo routines

Convert some remaining straglers' .get_drvinfo routines to use strlcpy
rather than strcpy/strncpy.

Signed-off-by: Rick Jones <rick.jones2@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agonet: use jump_label for netstamp_needed
Eric Dumazet [Tue, 15 Nov 2011 04:12:55 +0000 (04:12 +0000)]
net: use jump_label for netstamp_needed

netstamp_needed seems a good candidate to jump_label conversion.

This avoids 3 conditional branches per incoming packet in fast path.

No measurable difference, given that these conditional branches are
predicted on modern cpus. Only a small icache reduction, thanks to the
unlikely() stuff.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agoenable virtio_net to return bus_info in ethtool -i consistent with emulated NICs
Rick Jones [Mon, 14 Nov 2011 14:17:08 +0000 (14:17 +0000)]
enable virtio_net to return bus_info in ethtool -i consistent with emulated NICs

Add a new .bus_name to virtio_config_ops then modify virtio_net to
call through to it in an ethtool .get_drvinfo routine to report
bus_info in ethtool -i output which is consistent with other
emulated NICs and the output of lspci.

Signed-off-by: Rick Jones <rick.jones2@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agointel: Convert <FOO>_LENGTH_OF_ADDRESS to ETH_ALEN
Joe Perches [Tue, 20 Sep 2011 15:32:52 +0000 (15:32 +0000)]
intel: Convert <FOO>_LENGTH_OF_ADDRESS to ETH_ALEN

Use the normal #defines not module specific ones.

Signed-off-by: Joe Perches <joe@perches.com>
Tested-by: Stephen Ko <stephen.s.ko@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
12 years agoigb: Convert bare printk to pr_notice
Joe Perches [Fri, 21 Oct 2011 20:04:09 +0000 (20:04 +0000)]
igb: Convert bare printk to pr_notice

printks should use KERN_ levels.

Signed-off-by: Joe Perches <joe@perches.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
12 years agoigb: Convert printks to pr_<level>
Jeff Kirsher [Fri, 21 Oct 2011 20:01:34 +0000 (20:01 +0000)]
igb: Convert printks to pr_<level>

Based on original patch from Joe Perches <joe@perches.com>

Use the current logging styles.

pr_<level> conversions are now prefixed with "igb: "

Correct a defect where the trailing NTU may have been printed
on a separate line because of an interleaving hex_dump.

Remove unnecessary uses of KERN_CONT and use single pr_info()s
to avoid any possible output interleaving from other modules.

Coalesce formats as appropriate.

-v2 fix-up to make checkpatch.pl compliant and remove change to
    the copyright line

CC: Joe Perches <joe@perches.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
12 years agoixgbevf: Convert printks to pr_<level>
Jeff Kirsher [Fri, 21 Oct 2011 19:38:18 +0000 (19:38 +0000)]
ixgbevf: Convert printks to pr_<level>

Based on the original patch from Joe Perches <joe@perches.com>

Use the current logging styles, prefix output with "ixgbevf: "

Add #define pr_fmt
Coalesce formats.

-v2 Fix-up to make checkpatch.pl compliant and remove change to
    copyright line

CC: Joe Perches <joe@perches.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Tested-by: Sibai Li <sibai.li@intel.com>
12 years agoigbvf: Convert printks to pr_<level>
Jeff Kirsher [Fri, 21 Oct 2011 19:42:26 +0000 (19:42 +0000)]
igbvf: Convert printks to pr_<level>

Based on the previous patch from Joe Perches <joe@perches.com>

Use current logging styles.

Prefix all output via #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
Neaten link status dev_info.

-v2 Remove Copyright changes and fix-up patch to make it checkpatch.pl
    compliant.

CC: Joe Perches <joe@perches.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Tested-by: Sibai Li <sibai.li@intel.com>
12 years agoixgbe: fix LED blink logic to check for link
Emil Tantilov [Sat, 29 Oct 2011 06:54:55 +0000 (06:54 +0000)]
ixgbe: fix LED blink logic to check for link

Previously the driver would force link without checking whether the link was
already established. This caused some inconsistencies in the LED blink rate.

Do not force link if link is already up.

Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
12 years agoe1000e: Convert printks to pr_<level>
Jeff Kirsher [Thu, 3 Nov 2011 11:40:28 +0000 (11:40 +0000)]
e1000e: Convert printks to pr_<level>

Based on the original patch from Joe Perches.
Use the current logging styles.
pr_<level> conversions are now prefixed with "e1000e:"
Correct a couple of defects where the trailing NTU may have
been printed on a separate line because of an interleaving
hex_dump.
Remove unnecessary uses of KERN_CONT and use single pr_info()s
to avoid any possible output interleaving from other modules.
Coalesce formats as appropriate.
Remove an extra space from a broken across lines
coalescing of "Link Status " and " Change".

-v2 Remove changes to Copyright string

CC: Joe Perches <joe@perches.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
12 years agoe1000e: convert to real ndo_set_rx_mode
Jesse Brandeburg [Fri, 4 Nov 2011 05:47:06 +0000 (05:47 +0000)]
e1000e: convert to real ndo_set_rx_mode

Commit afc4b13d (net: remove use of ndo_set_multicast_list in
drivers) changed e1000e to use the ndo_set_rx_mode entry point,
but didn't implement the unicast address programming
functionality. Implement it to achieve the ability to add unicast
addresses.

Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
12 years agomdio-gpio: Add reset functionality to mdio-gpio driver(v2).
Srinivas Kandagatla [Tue, 15 Nov 2011 11:54:15 +0000 (11:54 +0000)]
mdio-gpio: Add reset functionality to mdio-gpio driver(v2).

This patch adds phy reset functionality to mdio-gpio driver. Now
mdio_gpio_platform_data has new member as function pointer which can be
filled at the bsp level for a callback from phy infrastructure. Also the
mdio-bitbang driver fills-in the reset function of mii_bus structure.

Without this patch the bsp level code has to takecare of the reseting
PHY's on the bus, which become bit hacky for every bsp and
phy-infrastructure is ignored aswell.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agoIPv6: Removing unnecessary NULL checks.
Matti Vaittinen [Tue, 15 Nov 2011 00:58:59 +0000 (00:58 +0000)]
IPv6: Removing unnecessary NULL checks.

This patch removes unnecessary NULL checks noticed by Dan Carpenter.
Checks were introduced in commit
4a287eba2de395713d8b2b2aeaa69fa086832d34 to net-next.

Signed-off-by: Matti Vaittinen <Mazziesaccount@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agoipv4: fix a memory leak in ic_bootp_send_if
RongQing.Li [Mon, 14 Nov 2011 19:37:24 +0000 (14:37 -0500)]
ipv4: fix a memory leak in ic_bootp_send_if

when dev_hard_header() failed, the newly allocated skb should be freed.

Signed-off-by: RongQing.Li <roy.qing.li@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agobnx2x: add endline at end of message
Dmitry Kravkov [Mon, 14 Nov 2011 19:36:40 +0000 (14:36 -0500)]
bnx2x: add endline at end of message

Reported-by: Joe Perches <joe@perches.com>
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agoIPv6 routing, NLM_F_* flag support: REPLACE and EXCL flags support, warn about missin...
Matti Vaittinen [Mon, 14 Nov 2011 00:15:14 +0000 (00:15 +0000)]
IPv6 routing, NLM_F_* flag support: REPLACE and EXCL flags support, warn about missing CREATE flag

The support for NLM_F_* flags at IPv6 routing requests.

If NLM_F_CREATE flag is not defined for RTM_NEWROUTE request,
warning is printed, but no error is returned. Instead new route is
added. Later NLM_F_CREATE may be required for
new route creation.

Exception is when NLM_F_REPLACE flag is given without NLM_F_CREATE, and
no matching route is found. In this case it should be safe to assume
that the request issuer is familiar with NLM_F_* flags, and does really
not want route to be created.

Specifying NLM_F_REPLACE flag will now make the kernel to search for
matching route, and replace it with new one. If no route is found and
NLM_F_CREATE is specified as well, then new route is created.

Also, specifying NLM_F_EXCL will yield returning of error if matching
route is found.

Patch created against linux-3.2-rc1

Signed-off-by: Matti Vaittinen <Mazziesaccount@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agoIPv6 routing, NLM_F_* flag support: warn if new route is created without NLM_F_CREATE
Matti Vaittinen [Mon, 14 Nov 2011 00:14:49 +0000 (00:14 +0000)]
IPv6 routing, NLM_F_* flag support: warn if new route is created without NLM_F_CREATE

The support for NLM_F_* flags at IPv6 routing requests.

Warn if NLM_F_CREATE flag is not defined for RTM_NEWROUTE request,
creating new table. Later NLM_F_CREATE may be required for
new route creation.

Patch created against linux-3.2-rc1

Signed-off-by: Matti Vaittinen <Mazziesaccount@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agonet/can/mscan: Fix buggy listen only mode setting
Wolfgang Grandegger [Mon, 14 Nov 2011 19:30:05 +0000 (14:30 -0500)]
net/can/mscan: Fix buggy listen only mode setting

This patch fixes an issue introduced recently with commit
452448f9283e1939408b397e87974a418825b0a8.

CC: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agoSweep the last of the active .get_drvinfo floors under ethernet/
Rick Jones [Mon, 14 Nov 2011 08:13:25 +0000 (08:13 +0000)]
Sweep the last of the active .get_drvinfo floors under ethernet/

This round of floor sweeping converts strncpy calls in various .get_drvinfo
routines to the preferred strlcpy.  It also does a modicum of other
cleaning in those routines.

Signed-off-by: Rick Jones <rick.jones2@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agobnx2x: uses build_skb() in receive path
Eric Dumazet [Mon, 14 Nov 2011 06:05:34 +0000 (06:05 +0000)]
bnx2x: uses build_skb() in receive path

bnx2x uses following formula to compute its rx_buf_sz :

dev->mtu + 2*L1_CACHE_BYTES + 14 + 8 + 8 + 2

Then core network adds NET_SKB_PAD and SKB_DATA_ALIGN(sizeof(struct
skb_shared_info))

Final allocated size for skb head on x86_64 (L1_CACHE_BYTES = 64,
MTU=1500) : 2112 bytes : SLUB/SLAB round this to 4096 bytes.

Since skb truesize is then bigger than SK_MEM_QUANTUM, we have lot of
false sharing because of mem_reclaim in UDP stack.

One possible way to half truesize is to reduce the need by 64 bytes
(2112 -> 2048 bytes)

Instead of allocating a full cache line at the end of packet for
alignment, we can use the fact that skb_shared_info sits at the end of
skb->head, and we can use this room, if we convert bnx2x to new
build_skb() infrastructure.

skb_shared_info will be initialized after hardware finished its
transfert, so we can eventually overwrite the final padding.

Using build_skb() also reduces cache line misses in the driver, since we
use cache hot skb instead of cold ones. Number of in-flight sk_buff
structures is lower, they are recycled while still hot.

Performance results :

(820.000 pps on a rx UDP monothread benchmark, instead of 720.000 pps)

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
CC: Eilon Greenstein <eilong@broadcom.com>
CC: Ben Hutchings <bhutchings@solarflare.com>
CC: Tom Herbert <therbert@google.com>
CC: Jamal Hadi Salim <hadi@mojatatu.com>
CC: Stephen Hemminger <shemminger@vyatta.com>
CC: Thomas Graf <tgraf@infradead.org>
CC: Herbert Xu <herbert@gondor.apana.org.au>
CC: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Acked-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agonet: introduce build_skb()
Eric Dumazet [Mon, 14 Nov 2011 06:03:34 +0000 (06:03 +0000)]
net: introduce build_skb()

One of the thing we discussed during netdev 2011 conference was the idea
to change some network drivers to allocate/populate their skb at RX
completion time, right before feeding the skb to network stack.

In old days, we allocated skbs when populating the RX ring.

This means bringing into cpu cache sk_buff and skb_shared_info cache
lines (since we clear/initialize them), then 'queue' skb->data to NIC.

By the time NIC fills a frame in skb->data buffer and host can process
it, cpu probably threw away the cache lines from its caches, because lot
of things happened between the allocation and final use.

So the deal would be to allocate only the data buffer for the NIC to
populate its RX ring buffer. And use build_skb() at RX completion to
attach a data buffer (now filled with an ethernet frame) to a new skb,
initialize the skb_shared_info portion, and give the hot skb to network
stack.

build_skb() is the function to allocate an skb, caller providing the
data buffer that should be attached to it. Drivers are expected to call
skb_reserve() right after build_skb() to adjust skb->data to the
Ethernet frame (usually skipping NET_SKB_PAD and NET_IP_ALIGN, but some
drivers might add a hardware provided alignment)

Data provided to build_skb() MUST have been allocated by a prior
kmalloc() call, with enough room to add SKB_DATA_ALIGN(sizeof(struct
skb_shared_info)) bytes at the end of the data without corrupting
incoming frame.

data = kmalloc(NET_SKB_PAD + NET_IP_ALIGN + 1536 +
               SKB_DATA_ALIGN(sizeof(struct skb_shared_info)),
       GFP_ATOMIC);
...
skb = build_skb(data);
if (!skb) {
recycle_data(data);
} else {
skb_reserve(skb, NET_SKB_PAD + NET_IP_ALIGN);
...
}

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
CC: Eilon Greenstein <eilong@broadcom.com>
CC: Ben Hutchings <bhutchings@solarflare.com>
CC: Tom Herbert <therbert@google.com>
CC: Jamal Hadi Salim <hadi@mojatatu.com>
CC: Stephen Hemminger <shemminger@vyatta.com>
CC: Thomas Graf <tgraf@infradead.org>
CC: Herbert Xu <herbert@gondor.apana.org.au>
CC: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agonet: fsl_pq_mdio: fix non tbi phy access
Baruch Siach [Mon, 14 Nov 2011 06:21:30 +0000 (08:21 +0200)]
net: fsl_pq_mdio: fix non tbi phy access

Since 952c5ca1 (fsl_pq_mdio: Clean up tbi address configuration) .probe returns
-EBUSY when the "tbi-phy" node is missing. Fix this.

Cc: Andy Fleming <afleming@freescale.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agonet/can/mscan: add listen only mode
Marc Kleine-Budde [Wed, 9 Nov 2011 10:50:49 +0000 (10:50 +0000)]
net/can/mscan: add listen only mode

This patch adds listen only mode to the mscan controller.

Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Acked-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agoneigh: new unresolved queue limits
Eric Dumazet [Wed, 9 Nov 2011 12:07:14 +0000 (12:07 +0000)]
neigh: new unresolved queue limits

Le mercredi 09 novembre 2011 à 16:21 -0500, David Miller a écrit :
> From: David Miller <davem@davemloft.net>
> Date: Wed, 09 Nov 2011 16:16:44 -0500 (EST)
>
> > From: Eric Dumazet <eric.dumazet@gmail.com>
> > Date: Wed, 09 Nov 2011 12:14:09 +0100
> >
> >> unres_qlen is the number of frames we are able to queue per unresolved
> >> neighbour. Its default value (3) was never changed and is responsible
> >> for strange drops, especially if IP fragments are used, or multiple
> >> sessions start in parallel. Even a single tcp flow can hit this limit.
> >  ...
> >
> > Ok, I've applied this, let's see what happens :-)
>
> Early answer, build fails.
>
> Please test build this patch with DECNET enabled and resubmit.  The
> decnet neigh layer still refers to the removed ->queue_len member.
>
> Thanks.

Ouch, this was fixed on one machine yesterday, but not the other one I
used this morning, sorry.

[PATCH V5 net-next] neigh: new unresolved queue limits

unres_qlen is the number of frames we are able to queue per unresolved
neighbour. Its default value (3) was never changed and is responsible
for strange drops, especially if IP fragments are used, or multiple
sessions start in parallel. Even a single tcp flow can hit this limit.

$ arp -d 192.168.20.108 ; ping -c 2 -s 8000 192.168.20.108
PING 192.168.20.108 (192.168.20.108) 8000(8028) bytes of data.
8008 bytes from 192.168.20.108: icmp_seq=2 ttl=64 time=0.322 ms

Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agobridge: add NTF_USE support
stephen hemminger [Wed, 9 Nov 2011 18:30:08 +0000 (18:30 +0000)]
bridge: add NTF_USE support

More changes to the recent code to support control of forwarding
database via netlink.
   * Support NTF_USE like neighbour table
   * Validate state bits from application
   * Only send notifications (and change bits) if new entry is
     different.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agoSweep additional floors of strcpy in .get_drvinfo routines
Rick Jones [Wed, 9 Nov 2011 09:58:07 +0000 (09:58 +0000)]
Sweep additional floors of strcpy in .get_drvinfo routines

Perform another round of floor sweeping, converting the .get_drvinfo
routines of additional drivers from strcpy to strlcpy along with
some conversion of sprintf to snprintf.

Signed-off-by: Rick Jones <rick.jones2@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agofsl_pq_mdio: Clean up tbi address configuration
Andy Fleming [Fri, 11 Nov 2011 05:10:39 +0000 (05:10 +0000)]
fsl_pq_mdio: Clean up tbi address configuration

The code for setting the address of the internal TBI PHY was
convoluted enough without a maze of ifdefs. Clean it up a bit
so we allow the logic to fail down to -ENODEV at the end of
the if/else ladder, rather than using ifdefs to repeat the same
failure code over and over.

Also, remove the support for the auto-configuration. I'm not aware of
anyone using it, and it ends up using the bus mutex before it's been
initialized.

Signed-off-by: Andy Fleming <afleming@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agonet-forcedeth: Add internal loopback support for forcedeth NICs.
Sanjay Hortikar [Fri, 11 Nov 2011 16:11:21 +0000 (16:11 +0000)]
net-forcedeth: Add internal loopback support for forcedeth NICs.

Support enabling/disabling/querying internal loopback mode for
forcedeth NICs using ethtool.

Signed-off-by: Sanjay Hortikar <horti@google.com>
Signed-off-by: Mahesh Bandewar <maheshb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
12 years ago6LoWPAN: update documentation
alex.bluesman.smirnov@gmail.com [Thu, 10 Nov 2011 07:41:11 +0000 (07:41 +0000)]
6LoWPAN: update documentation

This patch adds chapter to documentation which describes how to use
6lowpan technology.

Signed-off-by: Alexander Smirnov <alex.bluesman.smirnov@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
12 years ago6LoWPAN: UDP header decompression
alex.bluesman.smirnov@gmail.com [Thu, 10 Nov 2011 07:40:53 +0000 (07:40 +0000)]
6LoWPAN: UDP header decompression

This patch provides possibility to decompress UDP headers.
Derived from Contiki OS.

Signed-off-by: Alexander Smirnov <alex.bluesman.smirnov@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
12 years ago6LoWPAN: UDP header compression
alex.bluesman.smirnov@gmail.com [Thu, 10 Nov 2011 07:40:14 +0000 (07:40 +0000)]
6LoWPAN: UDP header compression

This patch adds support for UDP header compression.
Derived from Contiki OS.

Signed-off-by: Alexander Smirnov <alex.bluesman.smirnov@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
12 years ago6LoWPAN: set proper netdev flags
alex.bluesman.smirnov@gmail.com [Thu, 10 Nov 2011 07:39:37 +0000 (07:39 +0000)]
6LoWPAN: set proper netdev flags

This patch fixes settings for device initialization which makes possible to
use NDISC and TCP.

Signed-off-by: Alexander Smirnov <alex.bluesman.smirnov@gmail.com>
Acked-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
12 years ago6LoWPAN: disable debugging by default
alex.bluesman.smirnov@gmail.com [Thu, 10 Nov 2011 07:39:15 +0000 (07:39 +0000)]
6LoWPAN: disable debugging by default

This patch disables debug output enabled by default.

Signed-off-by: Alexander Smirnov <alex.bluesman.smirnov@gmail.com>
Acked-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
12 years ago6LoWPAN: add fragmentation support
alex.bluesman.smirnov@gmail.com [Thu, 10 Nov 2011 07:38:38 +0000 (07:38 +0000)]
6LoWPAN: add fragmentation support

This patch adds support for frame fragmentation.

Signed-off-by: Alexander Smirnov <alex.bluesman.smirnov@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agoipv6: reduce percpu needs for icmpv6msg mibs
Eric Dumazet [Sun, 13 Nov 2011 01:24:04 +0000 (01:24 +0000)]
ipv6: reduce percpu needs for icmpv6msg mibs

Reading /proc/net/snmp6 on a machine with a lot of cpus is very
expensive (can be ~88000 us).

This is because ICMPV6MSG MIB uses 4096 bytes per cpu, and folding
values for all possible cpus can read 16 Mbytes of memory (32MBytes on
non x86 arches)

ICMP messages are not considered as fast path on a typical server, and
eventually few cpus handle them anyway. We can afford an atomic
operation instead of using percpu data.

This saves 4096 bytes per cpu and per network namespace.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agonet: introduce ethernet teaming device
Jiri Pirko [Fri, 11 Nov 2011 22:16:48 +0000 (22:16 +0000)]
net: introduce ethernet teaming device

This patch introduces new network device called team. It supposes to be
very fast, simple, userspace-driven alternative to existing bonding
driver.

Userspace library called libteam with couple of demo apps is available
here:
https://github.com/jpirko/libteam
Note it's still in its dipers atm.

team<->libteam use generic netlink for communication. That and rtnl
suppose to be the only way to configure team device, no sysfs etc.

Python binding of libteam was recently introduced.
Daemon providing arpmon/miimon active-backup functionality will be
introduced shortly. All what's necessary is already implemented in
kernel team driver.

v7->v8:
- check ndo_ndo_vlan_rx_[add/kill]_vid functions before calling
  them.
- use dev_kfree_skb_any() instead of dev_kfree_skb()

v6->v7:
- transmit and receive functions are not checked in hot paths.
  That also resolves memory leak on transmit when no port is
  present

v5->v6:
- changed couple of _rcu calls to non _rcu ones in non-readers

v4->v5:
- team_change_mtu() uses team->lock while travesing though port
  list
- mac address changes are moved completely to jurisdiction of
  userspace daemon. This way the daemon can do FOM1, FOM2 and
  possibly other weird things with mac addresses.
  Only round-robin mode sets up all ports to bond's address then
  enslaved.
- Extended Kconfig text

v3->v4:
- remove redundant synchronize_rcu from __team_change_mode()
- revert "set and clear of mode_ops happens per pointer, not per
  byte"
- extend comment of function __team_change_mode()

v2->v3:
- team_change_mtu() uses rcu version of list traversal to unwind
- set and clear of mode_ops happens per pointer, not per byte
- port hashlist changed to be embedded into team structure
- error branch in team_port_enter() does cleanup now
- fixed rtln->rtnl

v1->v2:
- modes are made as modules. Makes team more modular and
  extendable.
- several commenters' nitpicks found on v1 were fixed
- several other bugs were fixed.
- note I ignored Eric's comment about roundrobin port selector
  as Eric's way may be easily implemented as another mode (mode
  "random") in future.

Signed-off-by: Jiri Pirko <jpirko@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agobnx2x: update driver version to 1.70.35-0
Dmitry Kravkov [Sun, 13 Nov 2011 04:34:32 +0000 (04:34 +0000)]
bnx2x: update driver version to 1.70.35-0

Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agobnx2x: Remove on-stack napi struct variable
Ariel Elior [Sun, 13 Nov 2011 04:34:31 +0000 (04:34 +0000)]
bnx2x: Remove on-stack napi struct variable

Signed-off-by: Ariel Elior <ariele@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agobnx2x: prevent race in statistics flow
Dmitry Kravkov [Sun, 13 Nov 2011 04:34:30 +0000 (04:34 +0000)]
bnx2x: prevent race in statistics flow

The race may cause access of registers while MAC hw block is
in reset state. As a result syslog will show error messages.
We can prevent this by using state from local variable.

Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agobnx2x: add fan failure event handling
Ariel Elior [Sun, 13 Nov 2011 04:34:29 +0000 (04:34 +0000)]
bnx2x: add fan failure event handling

Shut down the device in case of fan failure to prevent HW damage.

Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agobnx2x: remove unused #define
Dmitry Kravkov [Sun, 13 Nov 2011 04:34:28 +0000 (04:34 +0000)]
bnx2x: remove unused #define

Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agobnx2x: simplify definition of RX_SGE_MASK_LEN and use it.
Dmitry Kravkov [Sun, 13 Nov 2011 04:34:27 +0000 (04:34 +0000)]
bnx2x: simplify definition of RX_SGE_MASK_LEN and use it.

Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agobnx2x: DCBX: use #define instead of magic
Dmitry Kravkov [Sun, 13 Nov 2011 04:34:26 +0000 (04:34 +0000)]
bnx2x: DCBX: use #define instead of magic

Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agobnx2x: propagate DCBX negotiation
Dmitry Kravkov [Sun, 13 Nov 2011 04:34:25 +0000 (04:34 +0000)]
bnx2x: propagate DCBX negotiation

We need propagate the DCBX results from PMF to other functions
on the same port, in order to properly update netdev structure
and allow following new ETS and PFC configurations.

Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agobnx2x: separate FCoE and iSCSI license initialization.
Dmitry Kravkov [Sun, 13 Nov 2011 04:34:24 +0000 (04:34 +0000)]
bnx2x: separate FCoE and iSCSI license initialization.

FCoE license info must be initialized at probe(), but
iSCSI at open().

Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agobnx2x: remove unused variable
Dmitry Kravkov [Sun, 13 Nov 2011 04:34:23 +0000 (04:34 +0000)]
bnx2x: remove unused variable

Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agobnx2x: use rx_queue index for skb_record_rx_queue()
Dmitry Kravkov [Sun, 13 Nov 2011 04:34:22 +0000 (04:34 +0000)]
bnx2x: use rx_queue index for skb_record_rx_queue()

Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agobnx2x: allow FCoE and DCB for 578xx
Dmitry Kravkov [Sun, 13 Nov 2011 04:34:21 +0000 (04:34 +0000)]
bnx2x: allow FCoE and DCB for 578xx

Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agobe2net: stop issuing FW cmds if any cmd times out
Sathya Perla [Thu, 10 Nov 2011 19:18:00 +0000 (19:18 +0000)]
be2net: stop issuing FW cmds if any cmd times out

A FW cmd timeout (with a sufficiently large timeout value in the
order of tens of seconds) indicates an unresponsive FW. In this state
issuing further cmds and waiting for a completion will only stall the process.

Signed-off-by: Sathya Perla <sathya.perla@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agobe2net: don't log more than one error on detecting EEH/UE errors
Sathya Perla [Thu, 10 Nov 2011 19:17:59 +0000 (19:17 +0000)]
be2net: don't log more than one error on detecting EEH/UE errors

Currently we're spamming error messages each time a FW cmd call is made
while in EEH/UE error state. One log msg on error detection is enough.

Signed-off-by: Sathya Perla <sathya.perla@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agobe2net: stop checking the UE registers after an EEH error
Sathya Perla [Thu, 10 Nov 2011 19:17:58 +0000 (19:17 +0000)]
be2net: stop checking the UE registers after an EEH error

Signed-off-by: Sathya Perla <sathya.perla@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agobe2net: init (vf)_if_handle/vf_pmac_id to handle failure scenarios
Sathya Perla [Thu, 10 Nov 2011 19:17:57 +0000 (19:17 +0000)]
be2net: init (vf)_if_handle/vf_pmac_id to handle failure scenarios

Initialize if_handle, vf_if_handle and vf_pmac_id with "-1" so that in
failure cases when be_clear() is called, we can skip over
if_destroy/pmac_del cmds if they have not been created.

Signed-off-by: Sathya Perla <sathya.perla@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>