[media] video: mx2_camera: Use clk_prepare_enable/clk_disable_unprepare

Prepare the clock before enabling it.

Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Cc: <linux-media@vger.kernel.org>
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] video: mx1_camera: Use clk_prepare_enable/clk_disable_unprepare

Prepare the clock before enabling it.

Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Cc: <linux-media@vger.kernel.org>
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] ov772x: Stop sensor readout right after reset

The sensor starts streaming video as soon as it gets powered or is
reset. Disable the output in the reset function.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] ov772x: Compute window size registers at runtime

Instead of hardcoding register arrays, compute the values at runtime.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
[g.liakhovetski@gmx.de: keep (Q)VGA_* macros for now]
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] ov772x: Add support for SBGGR10 format

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] ov772x: Add ov772x_read() and ov772x_write() functions

And use them instead of calling SMBus access functions directly.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] ov772x: Make to_ov772x convert from v4l2_subdev to ov772x_priv

Conversion from i2c_client to ov772x_priv is only needed in a single
location, while conversion from v4l2_subdev to ov772x_priv is needed in
several locations. Perform the former manually, and use to_ov772x for
the later.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] ov772x: try_fmt must not default to the current format

If the requested format isn't supported, return a fixed default format
instead of the current format.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] ov772x: Don't fail in s_fmt if the requested format isn't supported

Select a default format instead.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] ov772x: Select the default format at probe time

The format and window size are only initialized during the first g_fmt
call. This leaves the device in an inconsistent state after
initialization, which will cause problems when implementing pad
operations. Move the format and window size initialization to probe
time.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] ov772x: Fix memory leak in probe error path

The control handler isn't freed if its initialization fails. Fix it.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] soc-camera: Push probe-time power management to drivers

Several client drivers access the hardware at probe time, for instance
to read the probe chip ID. Such chips need to be powered up when being
probed.

soc-camera handles this by powering chips up in the soc-camera probe
implementation. However, this will break with non soc-camera hosts that
don't perform the same operations.

Fix the problem by pushing the power up/down from the soc-camera core
down to individual drivers on a needs basis.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] soc-camera: Add and use soc_camera_power_[on|off]() helper functions

Instead of forcing all soc-camera drivers to go through the mid-layer to
handle power management, create soc_camera_power_[on|off]() functions
that can be called from the subdev .s_power() operation to manage
regulators and platform-specific power handling. This allows non
soc-camera hosts to use soc-camera-aware clients.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
[g.liakhovetski@gmx.de: fix compile breakage]
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] soc-camera: Continue the power off sequence if one of the steps fails

Powering off a device is a "best effort" task: failure to execute one of
the steps should not prevent the next steps to be executed. For
instance, an I2C communication error when putting the chip in stand-by
mode should not prevent the more agressive next step of turning the
chip's power supply off.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] soc_camera: Don't call .s_power() during probe

The .s_power() call only covers the .g_mbus_fmt() operation call.
Several clients required to be powered on to retrieve the current mbus
format but have now been fixed. The .s_power() call is thus not needed
anymore and can be removed.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] rename drivers/media/video as .../platform

The remaining drivers are mostly platform drivers. Name the
dir to reflect it.

It makes sense to latter break it into a few other dirs.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] move soc_camera i2c drivers into its own dir

Move all soc_camera i2c drivers into drivers/media/i2c/soc_camera/.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] move i2c files into drivers/media/i2c

Move ancillary I2C drivers into drivers/media/i2c, in order to
better organize them.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] reorganize the API core items

Reorganize the API core changes for them to appear closer to
the items that enable them, and not at the drivers part of
the menu.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] mmc/Kconfig: Improve driver name for siano mmc/sdio driver

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] move parallel port/isa video drivers to drivers/media/parport/

We should keep just the I2C drivers under drivers/media/video, and
then rename it to drivers/media/i2c.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] move the remaining PCI devices to drivers/media/pci

Move meye and sta2x11_vip into the drivers/media/pci subdirs.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] move analog PCI saa7146 drivers to its own dir

Instead of having them under drivers/media/video, move them
to their own directory.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] rename most media/video pci drivers to media/pci

Rename all PCI drivers with their own directory under
drivers/media/video into drivers/media/pci and update the
building system.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] bt8xx: move analog TV part to be together with DTV one

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] move the remaining USB drivers to drivers/media/usb

Move the 3 remaining usb drivers to their proper space.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] rename most media/video usb drivers to media/usb

Rename all USB drivers with their own directory under
drivers/media/video into drivers/media/usb and update the
building system.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] b2c2: fix driver's build due to the lack of pci DMA code

Fix a one-character typo at the makefile.

drivers/built-in.o: In function `flexcop_pci_remove':
flexcop-pci.c:(.text+0x20d1a28): undefined reference to `flexcop_dma_free'
flexcop-pci.c:(.text+0x20d1a3e): undefined reference to `flexcop_dma_free'
drivers/built-in.o: In function `flexcop_pci_stream_control':
flexcop-pci.c:(.text+0x20d2396): undefined reference to `flexcop_dma_config'
flexcop-pci.c:(.text+0x20d23b3): undefined reference to `flexcop_dma_config'
flexcop-pci.c:(.text+0x20d23cf): undefined reference to `flexcop_dma_config_timer'
flexcop-pci.c:(.text+0x20d23f5): undefined reference to `flexcop_dma_xfer_control'
flexcop-pci.c:(.text+0x20d244c): undefined reference to `flexcop_dma_control_timer_irq'
flexcop-pci.c:(.text+0x20d24b0): undefined reference to `flexcop_dma_control_timer_irq'
flexcop-pci.c:(.text+0x20d2507): undefined reference to `flexcop_dma_xfer_control'
drivers/built-in.o: In function `flexcop_pci_probe':
flexcop-pci.c:(.text+0x20d28d2): undefined reference to `flexcop_dma_allocate'
flexcop-pci.c:(.text+0x20d2907): undefined reference to `flexcop_dma_allocate'
flexcop-pci.c:(.text+0x20d2923): undefined reference to `flexcop_dma_free'

Reported-by: Fengguang Wu <wfg@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] media: davinci: fix section mismatch warnings

This patch fixes section mismatch warnings for
davinci video drivers.

[mchehab@redhat.com: applied it as a fixup over the previous (and wrong) changeset c6afbf2]
Signed-off-by: Lad, Prabhakar <prabhakar.lad@ti.com>
Signed-off-by: Manjunath Hadli <manjunath.hadli@ti.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

ioctl-number.txt: Remove legacy private ioctl's from media drivers

None of those drivers use private ioctl's, as they all got converted
to the standard V4L2 ones.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] b2c2: frontends/tuners are not needed at the bridge binding

The frontends/tuners are used inside the common part of the driver.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] siano: break it into common, mmc and usb

siano is, in fact, 2 drivers: one for MMC and one for USB, plus
a common bus-independent code. Break it accordingly.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] saa7146: Move it to its own directory

In order to better organize the directory tree, move the
saa7146 common driver to its own directory.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] common: move media/common/tuners to media/tuners

Move the tuners one level up, as the "common" directory will be used
by drivers that are shared between more than one driver.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] b2c2: break it into common/pci/usb directories

b2c2 is, in fact, 2 drivers: one for PCI and one for USB, plus
a common bus-independent code. Break it accordingly.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] Rename media/dvb as media/pci

The remaining dvb drivers are pci, so rename them to match the
bus.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] dvb-usb: move it to drivers/media/usb/dvb-usb

As media/dvb will be removed, move it to a proper place.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] firewire: move it one level up

Move firewire to one level up, as the dvb subdirectory will be
removed.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] move the dvb/frontends to drivers/media/dvb-frontends

Raise the DVB frontends one level up, as the intention is to remove
the drivers/media/dvb directory.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] dvb: move the dvb core one level up

just like the V4L2 core, move the DVB core to drivers/media, as the
intention is to get rid of both "video" and "dvb" directories.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] v4l: move v4l2 core into a separate directory

Currently, the v4l2 core is mixed together with other non-core drivers.
Move them into a separate directory.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] rc/Kconfig: Fix a warning

drivers/media/rc/Kconfig:291:warning: multi-line strings not supported

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] it913x ver 1.32 driver moved to dvb-usb-v2

Functional changes

PID filter is default to off and controlled from dvb-usb-v2

Driver now supports suspend and resume changes in dvb-usb-v2

USB bus repeater functions have been removed.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] Schedule removal of i.MX25 support in mx2_camera.c

Support for i.MX25 in mx2_camera.c has been broken
for a year. Furthermore, i.MX25 video capture HW
doesn't have much in common with i.MX27. A separate
driver would be desirable.

Signed-off-by: Javier Martin <javier.martin@vista-silicon.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] media: mx2_camera: Mark i.MX25 support as BROKEN

i.MX25 support is known to have been broken for almost a year.

Signed-off-by: Javier Martin <javier.martin@vista-silicon.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] s5k6aa: Use devm_kzalloc function

devm_kzalloc() eliminates the need to free explicitly thereby
making the code a bit simpler.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] saa7134-dvb: Fix kworld sbtvd I2C gate control

The correct place to put i2c_gate_ctrl is before calling tda18271_attach,
because the driver tda18271 will use it to enable or disable the i2c-bus
from the demodulator to the tuner.

And thus eliminate the error message: "Unknown device (255) detected
@ 1-00c0, device not supported" in the driver tda18271.

In the device kworld_sbtvd (hybrid analog and digital TV) the control
of the i2c-bus to tuner is done in the analog demodulator and not in
the digital demodulator.

Signed-off-by: Manoel Pinheiro <pinusdtv@hotmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] rc-core: move timeout and checks to lirc

The lirc TX functionality expects the process which writes (TX) data to
the lirc dev to sleep until the actual data has been transmitted by the
hardware.

Since the same timeout calculation is duplicated in more than one driver
(and would have to be duplicated in even more drivers as they gain TX
support), it makes sense to move this timeout calculation to the lirc
layer instead.

At the same time, centralize some of the sanity checks.

Signed-off-by: David Härdeman <david@hardeman.nu>
Cc: Jarod Wilson <jwilson@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] lmedm04: fix data usage past the end of the buffer

On Mon, 2012-08-13 at 19:58 +0300, Dan Carpenter wrote:
> Hello Mauro Carvalho Chehab,
>
> The patch db6651a9ebb3: "[media] lmedm04: fix build" from Aug 12,
> 2012, leads to the following warning:
> drivers/media/dvb/dvb-usb-v2/lmedm04.c:769 lme2510_download_firmware()
>   error: usb_control_msg() 'data' too small (128 vs 265)
>
>    737          data = kzalloc(128, GFP_KERNEL);
>                                ^^^
> data is 128 bytes.

Control isn't used, so remove it.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] DVB: improve handling of TS packets containing a raised TEI bit

When the TEI bit is raised, we should not trust any of the contents of
the packet in question, including but not limited to its PID number.

Considering that we don't trust the PID number of this packet, we should
not proceed to check the packet counter (if dvb_demux_tscheck is set).

We should expect to see at least one discontinuity after a bad packet is
received, so any time a TEI is detected, a following TS packet counter
mismatch is to be expected.

There is no real reason to ever allow bad packets to pass through the
kernel demux, other than for purposes of attempting error correction via
software or statistical information.

However, since we have always passed these bad packets though the demux,
we should not change this default behavior.

Without altering module options, this patch merely prevents the
TS packet counter check on packets containing a raised TEI.

If module option dvb_demux_feed_err_pkts is set to 0, the kernel demux
will drop these error packets entirely, preventing any possibility of
corruption caused by userspace programs that are expecting valid data.

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] cx88: Remove duplicate const

This patch fixes the following sparse warnings
by removing use of duplicate const.

drivers/media/video/cx88/cx88.h:152:40:
warning: duplicate const
drivers/media/video/cx88/cx88-core.c:256:33:
warning: duplicate const
drivers/media/video/cx88/cx88-alsa.c:769:41:
warning: duplicate const

As commented by Jonathan Nieder:

These double "const" were introduced in v2.6.37-rc1~64^2~464 (V4L/DVB:
drivers/media: Make static data tables and strings const, 2010-08-25).

The address of an array is already immutable by definition, so for
what it's worth, with or without a clarified commit message,

[mchehab@redhat.com: Tested with "gcc -s" (version 4.7.0):
 the produced asm is indeed equal before and after this patch]
Signed-off-by: Emil Goode <emilgoode@gmail.com>
Acked-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] frontend.h, Docbook: Improve status documentation

No functional changes. It just improves the description of the frontend
status, using Documentation/kernel-doc-nano-HOWTO.txt for the status
enumeration, and a table inside the DocBook.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] ARM: mach-omap2: board-rx51-peripherals: Add lirc-rx51 data

The IR diode on the RX51 is connected to the GPT9. This data is needed
for the IR driver to function.

Signed-off-by: Timo Kokkonen <timo.t.kokkonen@iki.fi>
Cc: Tony Lindgren <tony@atomide.com>
Cc: linux-omap@vger.kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] media: rc: Introduce RX51 IR transmitter driver

This is the driver for the IR transmitter diode found on the Nokia
N900 (also known as RX51) device. The driver is mostly the same as
found in the original 2.6.28 based kernel that comes with the device.

The following modifications have been made compared to the original
driver version:

- Adopt to the changes that has happen in the kernel during the past
  five years, such as the change in the include paths

- The OMAP DM-timers require much more care nowadays. The timers need
  to be enabled and disabled or otherwise many actions fail. Timers
  must not be freed without first stopping them or otherwise the timer
  cannot be requested again.

The code has been tested with sending IR codes with N900 device
running Debian userland. The device receiving the codes was Anysee
DVB-C USB receiver.

Signed-off-by: Timo Kokkonen <timo.t.kokkonen@iki.fi>
Cc: Tony Lindgren <tony@atomide.com>
Cc: linux-omap@vger.kernel.org
Cc: Sakari Ailus <sakari.ailus@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] dvb_usb_v2: use %*ph to dump usb xfer debugs

Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] dvb-usb: use %*ph to dump small buffers

[crope@iki.fi: fix trivial merge conflict]
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] saa7127: use %*ph to print small buffers

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] ati_remote: use %*ph to dump small buffers

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Anssi Hannula <anssi.hannula@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] dvb: use %*ph to hexdump small buffers

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] gspca: use %*ph to print small buffers

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] radio-shark2: use %*ph to print small buffers

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] dvb: frontends: use %*ph to dump small buffers

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] common: tunners: use %*ph to dump small buffers

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] dvb: get rid of fe_ioctl_override callback

This callback were meant to allow overriding a FE callback, before its
call, but it is not really needed, as the callback can be intercepted
after tuner attachment.

Worse than that, only DVBv3 calls are intercepted this way, so a DVBv5
application will produce different effects than a DVBv3 one.

So, get rid of it.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Acked-by: Antti Palosaari <crope@iki.fi>
Reviewed-by: Antti Palosaari <crope@iki.fi>

[media] staging: lirc: use %*ph to print small buffers

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Mauro Carvalho Chehab <mchehab@infradead.org>
Cc: linux-media@vger.kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] drivers/media/radio/radio-si4713.c: use devm_ functions

The various devm_ functions allocate memory that is released when a driver
detaches.  This patch uses these functions for data that is allocated in
the probe function of a platform device and is only freed in the remove
function.

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] drivers/media/radio/radio-wl1273.c: use devm_ functions

The various devm_ functions allocate memory that is released when a driver
detaches.  This patch uses these functions for data that is allocated in
the probe function of a platform device and is only freed in the remove
function.

In two cases, the original memory allocation function was kmalloc, which
has been changed to a zeroing allocation to benefit from the devm function.

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] drivers/media/radio/radio-timb.c: use devm_ functions

The various devm_ functions allocate memory that is released when a driver
detaches.  This patch uses these functions for data that is allocated in
the probe function of a platform device and is only freed in the remove
function.

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] lirc: lirc_ene0100.h is not referenced anywhere

There is a proper ene0100 driver anyway.

Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] lirc: remove lirc_ttusbir driver

This has been replaced by the ttusbir driver.

Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] rc: transmit on device which does not support it should fail

Currently write() will return 0 if an IR device does not support sending.

Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] saa7134: simplify timer activation

This simplies the code and resolves a possible race condition between
ir_raw_decode_timer_end() and saa7134_raw_decode_irq().

If the interrupt handler is called after ir_raw_decode_timer_end()
calls ir_raw_event_handle() but before clearing ir->active, then the
timer won't be rearmed.

Compile tested only.

Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] rc: do not wake up rc thread unless there is something to do

The TechnoTrend USB IR Receiver sends 125 ISO URBs per second, even when
there is no IR activity. Reduce the number of wake ups from the other
drivers too.

This saves about 0.25ms/s on a 2.4GHz Core 2 according to powertop.

Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] rc: Add support for the TechnoTrend USB IR Receiver

This driver adds support for TechnoTrend USB IR Receiver. It is a complete
rewrite of the staging/media/lirc/lirc_ttusbir driver. It adds more
accurate sample reporting and led control.

Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] iguanair: fix receiver overflow

The Pioneer CU-700 remote causes receiver overflows if you hold down any
button. The remote does not send NEC IR repeats, it repeats the entire
NEC code after 20ms.

The iguanair hardware advertises an interval of 10 which just not enough;
with 100 URBs per second and at most 7 edges per URB, we handle at most
700 edges per second. The remote generates about 900.

Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] iguanair: advertise the resolution and timeout properly

With the timeout supplied the interface can go idle. The keymap is
the same one as other drivers which do not come with a remote.

Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] iguanair: reset the IR state after rx overflow or receiver enable

Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] iguanair: fix return value for transmit

Also fix error codes returned from open.

Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] iguanair: support suspend and resume

Now unbind also stops the receiver.

Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] iguanair: ignore unsupported firmware versions

Firmware versions lower than 0x0205 use a different interface which is not
supported. Also report the firmware version in the standard format.

Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] iguanair: reuse existing urb callback for command responses

Rather than using usb_interrupt_msg() to receive responses, reuse the
urb callback we already have in place.

Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] davinci: fix build warning when CONFIG_DEBUG_SECTION_MISMATCH is enabled

Signed-off-by: Lad, Prabhakar <prabhakar.lad@ti.com>
Signed-off-by: Manjunath Hadli <manjunath.hadli@ti.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] DVB API: add INTERLEAVING_AUTO

After thinking twice, I ended up adding own value for AUTO
interleaving instead of using NONE.

API minor number is not needed to increase as that patch should
be the same Kernel as interleaving parameter is initially added.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] add DTMB support for DVB API

Cc: Patrick Boettcher <pboettcher@kernellabs.com>
Cc: Andreas Oberritter <obi@linuxtv.org>
Cc: Mauro Carvalho Chehab <mchehab@redhat.com>
Acked-by: Patrick Boettcher <pboettcher@kernellabs.com>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] rtl28xxu: generalize streaming control

Move rtl2831u LED from streaming control to power control. It
changes LED behavior slightly but who cares :)
After that same streaming control can be used for both rtl2831u
and rtl2832u.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] rtl28xxu: convert to new DVB USB

Tested-by: Hin-Tak Leung <htl10@users.sourceforge.net>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] uvcvideo: Add support for Ophir Optronics SPCAM 620U cameras

The camera requires the PROBE_MINMAX quirk. Add a corresponding entry in
the device IDs list.

Reported-by: Stefan Muenzel <stefanmuenzel@googlemail.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] uvcvideo: Support 10bit, 12bit and alternate 8bit greyscale formats

The SPCAM SP620U camera uses the alternate "Y8  " GUID for the 8-bit
greyscale format, and supports a 12-bit greyscale format. Add support
for those in the driver, as well as for 10-bit greyscale formats.

Signed-off-by: Stefan Muenzel <stefanmuenzel@googlemail.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] uvcvideo: Support super speed endpoints

Compute the maximum number of bytes per interval using the burst and
multiplier values for super speed endpoints.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] ttpci: add support for Omicom S2 PCI

Support for yet another SAA7146-based budget card (very similar to TT
S2-1600, but use LNBH23 instead ISL6423).

Signed-off-by: Evgeny Plehov <EvgenyPlehov@ukr.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] staging: media: Remove easycap driver

This driver has been replaced by stk1160.

Signed-off-by: Ezequiel Garcia <elezegarcia@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] media: Add stk1160 new driver (easycap replacement)

This driver adds support for stk1160 usb bridge as used in some
video/audio usb capture devices.
It is a complete rewrite of staging/media/easycap driver and
it's meant as a replacement.

As stk1160 allows communication with an ac97 codec chip, this
driver allows to register a control-only sound card to allow the user
to access ac97 controls.

Two devices have been used for testing:
* 1-cvbs video and 1-audio ac97 input,
* 4-cvbs inputs
Both of these devices reports with the same id [05e1:0408],
so the driver tries to support a superset of the capabilities.

By using keep_buffers module parameter it's possible to prevent
the driver from releasing urb buffers when streaming is stopped.
The usage of this parameter can avoid memory fragmentation that may
cause the driver to stop working on low memory systems.
A similar mechanism is implemented in em28xx driver (see commit 86d38d).

Signed-off-by: Ezequiel Garcia <elezegarcia@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] qt1010: signedness bug in qt1010_init_meas1()

qt1010_init_meas2() returns zero on success and negative error codes on
failure so the return type should be int instead of u8.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] tda18218: silence compiler warning

Trivial fix.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] tda18212: use Kernel dev_* logging

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] tda18212: silence compiler warning

Trivial fix.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] mantis: fix silly crash case

If we set mantis->fe to NULL on an error its not a good idea to then try
passing NULL to the unregister paths and oopsing really.

Resolves-bug: https://bugzilla.kernel.org/show_bug.cgi?id=16473

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] dvb: nxt200x: apply levels to the printk()s

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] saa7164: use native print_hex_dump() instead of custom one

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] media: fix MEDIA_IOC_DEVICE_INFO return code

The MEDIA_IOC_DEVICE_INFO ioctl was returning a positive value rather
than a negative error code when failing to copy output parameter to
user-space.

Tested by compilation only.

Signed-off-by: Nicolas Thery <nicolas.thery@st.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>