mlxsw: spectrum: Fix error return code in mlxsw_sp_port_create()

[ Upstream commit d86fd113ebbb37726ef7c7cc6fd6d5ce377455d6 ]

Fix to return a negative error code from the VID  create error handling
case instead of 0, as done elsewhere in this function.

Fixes: c57529e1d5d8 ("mlxsw: spectrum: Replace vPorts with Port-VLAN")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dmaengine: ti-dma-crossbar: Correct am335x/am43xx mux value type

[ Upstream commit 288e7560e4d3e259aa28f8f58a8dfe63627a1bf6 ]

The used 0x1f mask is only valid for am335x family of SoC, different family
using this type of crossbar might have different number of electable
events. In case of am43xx family 0x3f mask should have been used for
example.
Instead of trying to handle each family's mask, just use u8 type to store
the mux value since the event offsets are aligned to byte offset.

Fixes: 42dbdcc6bf965 ("dmaengine: ti-dma-crossbar: Add support for crossbar on AM33xx/AM43xx")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: Intel: Skylake: Fix uuid_module memory leak in failure case

[ Upstream commit f8e066521192c7debe59127d90abbe2773577e25 ]

In the loop that adds the uuid_module to the uuid_list list, allocated
memory is not properly freed in the error path free uuid_list whenever
any of the memory allocation in the loop fails to avoid memory leak.

Signed-off-by: Pankaj Bharadiya <pankaj.laxminarayan.bharadiya@intel.com>
Signed-off-by: Guneshwor Singh <guneshwor.o.singh@intel.com>
Acked-By: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PM / s2idle: Clear the events_check_enabled flag

[ Upstream commit 95b982b45122c57da2ee0b46cce70775e1d987af ]

Problem: This flag does not get cleared currently in the suspend or
resume path in the following cases:

 * In case some driver's suspend routine returns an error.
 * Successful s2idle case
 * etc?

Why is this a problem: What happens is that the next suspend attempt
could fail even though the user did not enable the flag by writing to
/sys/power/wakeup_count. This is 1 use case how the issue can be seen
(but similar use case with driver suspend failure can be thought of):

 1. Read /sys/power/wakeup_count
 2. echo count > /sys/power/wakeup_count
 3. echo freeze > /sys/power/wakeup_count
 4. Let the system suspend, and wakeup the system using some wake source
    that calls pm_wakeup_event() e.g. power button or something.
 5. Note that the combined wakeup count would be incremented due
    to the pm_wakeup_event() in the resume path.
 6. After resuming the events_check_enabled flag is still set.

At this point if the user attempts to freeze again (without writing to
/sys/power/wakeup_count), the suspend would fail even though there has
been no wake event since the past resume.

Address that by clearing the flag just before a resume is completed,
so that it is always cleared for the corner cases mentioned above.

Signed-off-by: Rajat Jain <rajatja@google.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amdgpu: bypass lru touch for KIQ ring submission

[ Upstream commit dce1e131dd4dc68099ff1b70aa03cd2d0acf8639 ]

KIQ ring submission is used for register accessing on SRIOV
VF that could happen both in irq enabled and irq disabled cases.
Inversion lock could happen on adev->ring_lru_list_lock, while
this operation is useless and just adds overhead in this use
case.

Signed-off-by: Pixel Ding <Pixel.Ding@amd.com>
Reviewed-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: aacraid: use timespec64 instead of timeval

[ Upstream commit 820f188659122602ab217dd80cfa32b3ac0c55c0 ]

aacraid passes the current time to the firmware in one of two ways,
either as year/month/day/... or as 32-bit unsigned seconds.

The first one is broken on 32-bit architectures as it cannot go past
year 2038. Using timespec64 here makes it behave properly on both 32-bit
and 64-bit architectures, and avoids relying on signed integer overflow
to pass times into the second interface.

The interface used in aac_send_hosttime() however is still problematic
in year 2106 when 32-bit seconds overflow. Hopefully we don't have to
worry about aacraid by that time.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Dave Carroll <david.carroll@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rtc: pcf8563: fix output clock rate

[ Upstream commit a3350f9c57ffad569c40f7320b89da1f3061c5bb ]

The pcf8563_clkout_recalc_rate function erroneously ignores the
frequency index read from the CLKO register and always returns
32768 Hz.

Fixes: a39a6405d5f9 ("rtc: pcf8563: add CLKOUT to common clock framework")
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

video: fbdev: au1200fb: Return an error code if a memory allocation fails

[ Upstream commit 8cae353e6b01ac3f18097f631cdbceb5ff28c7f3 ]

'ret' is known to be 0 at this point.
In case of memory allocation error in 'framebuffer_alloc()', return
-ENOMEM instead.

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

video: fbdev: au1200fb: Release some resources if a memory allocation fails

[ Upstream commit 451f130602619a17c8883dd0b71b11624faffd51 ]

We should go through the error handling code instead of returning -ENOMEM
directly.

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

video: udlfb: Fix read EDID timeout

[ Upstream commit c98769475575c8a585f5b3952f4b5f90266f699b ]

While usb_control_msg function expects timeout in miliseconds, a value
of HZ is used. Replace it with USB_CTRL_GET_TIMEOUT and also fix error
message which looks like:
udlfb: Read EDID byte 78 failed err ffffff92
as error is either negative errno or number of bytes transferred use %d
format specifier.

Returned EDID is in second byte, so return error when less than two bytes
are received.

Fixes: 18dffdf8913a ("staging: udlfb: enhance EDID and mode handling support")
Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Cc: Bernie Thompson <bernie@plugable.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fbdev: controlfb: Add missing modes to fix out of bounds access

[ Upstream commit ac831a379d34109451b3c41a44a20ee10ecb615f ]

Dan's static analysis says:

    drivers/video/fbdev/controlfb.c:560 control_setup()
    error: buffer overflow 'control_mac_modes' 20 <= 21

Indeed, control_mac_modes[] has only 20 elements, while VMODE_MAX is 22,
which may lead to an out of bounds read when parsing vmode commandline
options.

The bug was introduced in v2.4.5.6, when 2 new modes were added to
macmodes.h, but control_mac_modes[] wasn't updated:

https://kernel.opensuse.org/cgit/kernel/diff/include/video/macmodes.h?h=v2.5.2&id=29f279c764808560eaceb88fef36cbc35c529aad

Augment control_mac_modes[] with the two new video modes to fix this.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sfc: don't warn on successful change of MAC

[ Upstream commit cbad52e92ad7f01f0be4ca58bde59462dc1afe3a ]

Fixes: 535a61777f44e ("sfc: suppress handled MCDI failures when changing the MAC address")
Signed-off-by: Bert Kenward <bkenward@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

HID: cp2112: fix broken gpio_direction_input callback

[ Upstream commit 7da85fbf1c87d4f73621e0e7666a3387497075a9 ]

When everything goes smoothly, ret is set to 0 which makes the function
to return EIO error.

Fixes: 8e9faa15469e ("HID: cp2112: fix gpio-callback error handling")
Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

IB/mlx4: Fix RSS's QPC attributes assignments

[ Upstream commit 108809a0571cd1e1b317c5c083a371e163e1f8f9 ]

In the modify QP handler the base_qpn_udp field in the RSS QPC is
overwrite later by irrelevant value assignment. Hence, ingress packets
which gets to the RSS QP will be steered then to a garbage QPN.

The patch fixes this by skipping the above assignment when a RSS QP is
modified, also, the RSS context's attributes assignments are relocated
just before the context is posted to avoid future issues like this.

Additionally, this patch takes the opportunity to change the code to be
disciplined to the device's manual and assigns the RSS QP context just at
RESET to INIT transition.

Fixes:3078f5f1bd8b ("IB/mlx4: Add support for RSS QP")
Signed-off-by: Guy Levi <guyle@mellanox.com>
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: fix crash when a directory's i_size is too small

commit 9d5afec6b8bd46d6ed821aa1579634437f58ef1f upstream.

On a ppc64 machine, when mounting a fuzzed ext2 image (generated by
fsfuzzer) the following call trace is seen,

VFS: brelse: Trying to free free buffer
WARNING: CPU: 1 PID: 6913 at /root/repos/linux/fs/buffer.c:1165 .__brelse.part.6+0x24/0x40
.__brelse.part.6+0x20/0x40 (unreliable)
.ext4_find_entry+0x384/0x4f0
.ext4_lookup+0x84/0x250
.lookup_slow+0xdc/0x230
.walk_component+0x268/0x400
.path_lookupat+0xec/0x2d0
.filename_lookup+0x9c/0x1d0
.vfs_statx+0x98/0x140
.SyS_newfstatat+0x48/0x80
system_call+0x58/0x6c

This happens because the directory that ext4_find_entry() looks up has
inode->i_size that is less than the block size of the filesystem. This
causes 'nblocks' to have a value of zero. ext4_bread_batch() ends up not
reading any of the directory file's blocks. This renders the entries in
bh_use[] array to continue to have garbage data. buffer_uptodate() on
bh_use[0] can then return a zero value upon which brelse() function is
invoked.

This commit fixes the bug by returning -ENOENT when the directory file
has no associated blocks.

Reported-by: Abdul Haleem <abdhalee@linux.vnet.ibm.com>
Signed-off-by: Chandan Rajendra <chandan@linux.vnet.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: add missing error check in __ext4_new_inode()

commit 996fc4477a0ea28226b30d175f053fb6f9a4fa36 upstream.

It's possible for ext4_get_acl() to return an ERR_PTR.  So we need to
add a check for this case in __ext4_new_inode().  Otherwise on an
error we can end up oops the kernel.

This was getting triggered by xfstests generic/388, which is a test
which exercises the shutdown code path.

Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: fix fdatasync(2) after fallocate(2) operation

commit c894aa97577e47d3066b27b32499ecf899bfa8b0 upstream.

Currently, fallocate(2) with KEEP_SIZE followed by a fdatasync(2)
then crash, we'll see wrong allocated block number (stat -c %b), the
blocks allocated beyond EOF are all lost. fstests generic/468
exposes this bug.

Commit 67a7d5f561f4 ("ext4: fix fdatasync(2) after extent
manipulation operations") fixed all the other extent manipulation
operation paths such as hole punch, zero range, collapse range etc.,
but forgot the fallocate case.

So similarly, fix it by recording the correct journal tid in ext4
inode in fallocate(2) path, so that ext4_sync_file() will wait for
the right tid to be committed on fdatasync(2).

This addresses the test failure in xfstests test generic/468.

Signed-off-by: Eryu Guan <eguan@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: support fast symlinks from ext3 file systems

commit fc82228a5e3860502dbf3bfa4a9570cb7093cf7f upstream.

407cd7fb83c0 (ext4: change fast symlink test to not rely on i_blocks)
broke ~10 years old ext3 file systems created by 2.6.17. Any ELF
executable fails because the /lib/ld-linux.so.2 fast symlink
cannot be read anymore.

The patch assumed fast symlinks were created in a specific way,
but that's not true on these really old file systems.

The new behavior is apparently needed only with the large EA inode
feature.

Revert to the old behavior if the large EA inode feature is not set.

This makes my old VM boot again.

Fixes: 407cd7fb83c0 (ext4: change fast symlink test to not rely on i_blocks)
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "exec: avoid RLIMIT_STACK races with prlimit()"

commit 779f4e1c6c7c661db40dfebd6dd6bda7b5f88aa3 upstream.

This reverts commit 04e35f4495dd560db30c25efca4eecae8ec8c375.

SELinux runs with secureexec for all non-"noatsecure" domain transitions,
which means lots of processes end up hitting the stack hard-limit change
that was introduced in order to fix a race with prlimit(). That race fix
will need to be redesigned.

Reported-by: Laura Abbott <labbott@redhat.com>
Reported-by: Tomáš Trnka <trnka@scm.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dmaengine: dmatest: move callback wait queue to thread context

commit 6f6a23a213be51728502b88741ba6a10cda2441d upstream.

Commit adfa543e7314 ("dmatest: don't use set_freezable_with_signal()")
introduced a bug (that is in fact documented by the patch commit text)
that leaves behind a dangling pointer. Since the done_wait structure is
allocated on the stack, future invocations to the DMATEST can produce
undesirable results (e.g., corrupted spinlocks).

Commit a9df21e34b42 ("dmaengine: dmatest: warn user when dma test times
out") attempted to WARN the user that the stack was likely corrupted but
did not fix the actual issue.

This patch fixes the issue by pushing the wait queue and callback
structs into the the thread structure. If a failure occurs due to time,
dmaengine_terminate_all will force the callback to safely call
wake_up_all() without possibility of using a freed pointer.

Bug: https://bugzilla.kernel.org/show_bug.cgi?id=197605
Fixes: adfa543e7314 ("dmatest: don't use set_freezable_with_signal()")
Reviewed-by: Sinan Kaya <okaya@codeaurora.org>
Suggested-by: Shunyong Yang <shunyong.yang@hxt-semitech.com>
Signed-off-by: Adam Wallis <awallis@codeaurora.org>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

posix-timer: Properly check sigevent->sigev_notify

commit cef31d9af908243421258f1df35a4a644604efbe upstream.

timer_create() specifies via sigevent->sigev_notify the signal delivery for
the new timer. The valid modes are SIGEV_NONE, SIGEV_SIGNAL, SIGEV_THREAD
and (SIGEV_SIGNAL | SIGEV_THREAD_ID).

The sanity check in good_sigevent() is only checking the valid combination
for the SIGEV_THREAD_ID bit, i.e. SIGEV_SIGNAL, but if SIGEV_THREAD_ID is
not set it accepts any random value.

This has no real effects on the posix timer and signal delivery code, but
it affects show_timer() which handles the output of /proc/$PID/timers. That
function uses a string array to pretty print sigev_notify. The access to
that array has no bound checks, so random sigev_notify cause access beyond
the array bounds.

Add proper checks for the valid notify modes and remove the SIGEV_THREAD_ID
masking from various code pathes as SIGEV_NONE can never be set in
combination with SIGEV_THREAD_ID.

Reported-by: Eric Biggers <ebiggers3@gmail.com>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Reported-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

eeprom: at24: change nvmem stride to 1

commit 7f6d2ecd3d7acaf205ea7b3e96f9ffc55b92298b upstream.

Trying to read the MAC address from an eeprom that has an offset that
is not a multiple of 4 causes an error currently.

Fix it by changing the nvmem stride to 1.

Signed-off-by: David Lechner <david@lechnology.com>
[Bartosz: tweaked the commit message]
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/boot/compressed/64: Print error if 5-level paging is not supported

commit 6d7e0ba2d2be9e50cccba213baf07e0e183c1b24 upstream.

If the machine does not support the paging mode for which the kernel was
compiled, the boot process cannot continue.

It's not possible to let the kernel detect the mismatch as it does not even
reach the point where cpu features can be evaluted due to a triple fault in
the KASLR setup.

Instead of instantaneous silent reboot, emit an error message which gives
the user the information why the boot fails.

Fixes: 77ef56e4f0fb ("x86: Enable 5-level paging support via CONFIG_X86_5LEVEL=y")
Reported-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Borislav Petkov <bp@suse.de>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: linux-mm@kvack.org
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lkml.kernel.org/r/20171204124059.63515-3-kirill.shutemov@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/boot/compressed/64: Detect and handle 5-level paging at boot-time

commit 08529078d8d9adf689bf39cc38d53979a0869970 upstream.

Prerequisite for fixing the current problem of instantaneous reboots when a
5-level paging kernel is booted on 4-level paging hardware.

At the same time this change prepares the decompression code to boot-time
switching between 4- and 5-level paging.

[ tglx: Folded the GCC < 5 fix. ]

Fixes: 77ef56e4f0fb ("x86: Enable 5-level paging support via CONFIG_X86_5LEVEL=y")
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: linux-mm@kvack.org
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Borislav Petkov <bp@suse.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lkml.kernel.org/r/20171204124059.63515-2-kirill.shutemov@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iw_cxgb4: only insert drain cqes if wq is flushed

commit c058ecf6e455fac7346d46197a02398ead90851f upstream.

Only insert our special drain CQEs to support ib_drain_sq/rq() after
the wq is flushed. Otherwise, existing but not yet polled CQEs can be
returned out of order to the user application.  This can happen when the
QP has exited RTS but not yet flushed the QP, which can happen during
a normal close (vs abortive close).

In addition never count the drain CQEs when determining how many CQEs
need to be synthesized during the flush operation.  This latter issue
should never happen if the QP is properly flushed before inserting the
drain CQE, but I wanted to avoid corrupting the CQ state.  So we handle
it and log a warning once.

Fixes: 4fe7c2962e11 ("iw_cxgb4: refactor sq/rq drain logic")
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

SUNRPC: Fix a race in the receive code path

commit 90d91b0cd371193d9dbfa9beacab8ab9a4cb75e0 upstream.

We must ensure that the call to rpc_sleep_on() in xprt_transmit() cannot
race with the call to xprt_complete_rqst().

Reported-by: Chuck Lever <chuck.lever@oracle.com>
Link: https://bugzilla.linux-nfs.org/show_bug.cgi?id=317
Fixes: ce7c252a8c74 ("SUNRPC: Add a separate spinlock to protect..")
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dm: fix various targets to dm_register_target after module __init resources created

commit 7e6358d244e4706fe612a77b9c36519a33600ac0 upstream.

A NULL pointer is seen if two concurrent "vgchange -ay -K <vg name>"
processes race to load the dm-thin-pool module:

 PID: 25992 TASK: ffff883cd7d23500 CPU: 4 COMMAND: "vgchange"
  #0 [ffff883cd743d600] machine_kexec at ffffffff81038fa9
  0000001 [ffff883cd743d660] crash_kexec at ffffffff810c5992
  0000002 [ffff883cd743d730] oops_end at ffffffff81515c90
  0000003 [ffff883cd743d760] no_context at ffffffff81049f1b
  0000004 [ffff883cd743d7b0] __bad_area_nosemaphore at ffffffff8104a1a5
  0000005 [ffff883cd743d800] bad_area at ffffffff8104a2ce
  0000006 [ffff883cd743d830] __do_page_fault at ffffffff8104aa6f
  0000007 [ffff883cd743d950] do_page_fault at ffffffff81517bae
  0000008 [ffff883cd743d980] page_fault at ffffffff81514f95
     [exception RIP: kmem_cache_alloc+108]
     RIP: ffffffff8116ef3c RSP: ffff883cd743da38 RFLAGS: 00010046
     RAX: 0000000000000004 RBX: ffffffff81121b90 RCX: ffff881bf1e78cc0
     RDX: 0000000000000000 RSI: 00000000000000d0 RDI: 0000000000000000
     RBP: ffff883cd743da68 R8: ffff881bf1a4eb00 R9: 0000000080042000
     R10: 0000000000002000 R11: 0000000000000000 R12: 00000000000000d0
     R13: 0000000000000000 R14: 00000000000000d0 R15: 0000000000000246
     ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018
  0000009 [ffff883cd743da70] mempool_alloc_slab at ffffffff81121ba5
 0000010 [ffff883cd743da80] mempool_create_node at ffffffff81122083
 0000011 [ffff883cd743dad0] mempool_create at ffffffff811220f4
 0000012 [ffff883cd743dae0] pool_ctr at ffffffffa08de049 [dm_thin_pool]
 0000013 [ffff883cd743dbd0] dm_table_add_target at ffffffffa0005f2f [dm_mod]
 0000014 [ffff883cd743dc30] table_load at ffffffffa0008ba9 [dm_mod]
 0000015 [ffff883cd743dc90] ctl_ioctl at ffffffffa0009dc4 [dm_mod]

The race results in a NULL pointer because:

Process A (vgchange -ay -K):
  a. send DM_LIST_VERSIONS_CMD ioctl;
  b. pool_target not registered;
  c. modprobe dm_thin_pool and wait until end.

Process B (vgchange -ay -K):
  a. send DM_LIST_VERSIONS_CMD ioctl;
  b. pool_target registered;
  c. table_load->dm_table_add_target->pool_ctr;
  d. _new_mapping_cache is NULL and panic.
Note:
  1. process A and process B are two concurrent processes.
  2. pool_target can be detected by process B but
  _new_mapping_cache initialization has not ended.

To fix dm-thin-pool, and other targets (cache, multipath, and snapshot)
with the same problem, simply dm_register_target() after all resources
created during module init (as labelled with __init) are finished.

Signed-off-by: monty <monty_pavel@sina.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sched/rt: Do not pull from current CPU if only one CPU to pull

commit f73c52a5bcd1710994e53fbccc378c42b97a06b6 upstream.

Daniel Wagner reported a crash on the BeagleBone Black SoC.

This is a single CPU architecture, and does not have a functional
arch_send_call_function_single_ipi() implementation which can crash
the kernel if that is called.

As it only has one CPU, it shouldn't be called, but if the kernel is
compiled for SMP, the push/pull RT scheduling logic now calls it for
irq_work if the one CPU is overloaded, it can use that function to call
itself and crash the kernel.

Ideally, we should disable the SCHED_FEAT(RT_PUSH_IPI) if the system
only has a single CPU. But SCHED_FEAT is a constant if sched debugging
is turned off. Another fix can also be used, and this should also help
with normal SMP machines. That is, do not initiate the pull code if
there's only one RT overloaded CPU, and that CPU happens to be the
current CPU that is scheduling in a lower priority task.

Even on a system with many CPUs, if there's many RT tasks waiting to
run on a single CPU, and that CPU schedules in another RT task of lower
priority, it will initiate the PULL logic in case there's a higher
priority RT task on another CPU that is waiting to run. But if there is
no other CPU with waiting RT tasks, it will initiate the RT pull logic
on itself (as it still has RT tasks waiting to run). This is a wasted
effort.

Not only does this help with SMP code where the current CPU is the only
one with RT overloaded tasks, it should also solve the issue that
Daniel encountered, because it will prevent the PULL logic from
executing, as there's only one CPU on the system, and the check added
here will cause it to exit the RT pull code.

Reported-by: Daniel Wagner <wagi@monom.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-rt-users <linux-rt-users@vger.kernel.org>
Fixes: 4bdced5c9 ("sched/rt: Simplify the IPI based RT balancing logic")
Link: http://lkml.kernel.org/r/20171202130454.4cbbfe8d@vmware.local.home
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: libsas: fix length error in sas_smp_handler()

commit 621f6401fdeefe96dfe9eab4b167c7c39f552bb0 upstream.

The return value of smp_execute_task_sg() is the untransferred residual,
but bsg_job_done() requires the length of payload received. This makes
SMP passthrough commands from userland by sg ioctl to libsas get a wrong
response. The userland tools such as smp_utils failed because of these
wrong responses:

~#smp_discover /dev/bsg/expander-2\:13
response too short, len=0
~#smp_discover /dev/bsg/expander-2\:134
response too short, len=0

Fix this by passing the actual received length to bsg_job_done(). And if
smp_execute_task_sg() returns 0, this means received length is exactly
the buffer length.

[mkp: typo]

Fixes: 651a01364994 ("scsi: scsi_transport_sas: switch to bsg-lib for SMP passthrough")
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Reported-by: chenqilin <chenqilin2@huawei.com>
Tested-by: chenqilin <chenqilin2@huawei.com>
CC: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: core: Fix a scsi_show_rq() NULL pointer dereference

commit 14e3062fb18532175af4d1c4073597999f7a2248 upstream.

Avoid that scsi_show_rq() triggers a NULL pointer dereference if called
after sd_uninit_command(). Swap the NULL pointer assignment and the
mempool_free() call in sd_uninit_command() to make it less likely that
scsi_show_rq() triggers a use-after-free. Note: even with these changes
scsi_show_rq() can trigger a use-after-free but that's a lesser evil
than e.g. suppressing debug information for T10 PI Type 2 commands
completely. This patch fixes the following oops:

BUG: unable to handle kernel NULL pointer dereference at (null)
IP: scsi_format_opcode_name+0x1a/0x1c0
CPU: 1 PID: 1881 Comm: cat Not tainted 4.14.0-rc2.blk_mq_io_hang+ #516
Call Trace:
 __scsi_format_command+0x27/0xc0
 scsi_show_rq+0x5c/0xc0
 __blk_mq_debugfs_rq_show+0x116/0x130
 blk_mq_debugfs_rq_show+0xe/0x10
 seq_read+0xfe/0x3b0
 full_proxy_read+0x54/0x90
 __vfs_read+0x37/0x160
 vfs_read+0x96/0x130
 SyS_read+0x55/0xc0
 entry_SYSCALL_64_fastpath+0x1a/0xa5

[mkp: added Type 2]

Fixes: 0eebd005dd07 ("scsi: Implement blk_mq_ops.show_rq()")
Reported-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: James E.J. Bottomley <jejb@linux.vnet.ibm.com>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: fix CONFIG_DEBUG_WX address reporting

commit 1d08a044cf12aee37dfd54837558e3295287b343 upstream.

In ptdump_check_wx(), we pass walk_pgd() a start address of 0 (rather
than VA_START) for the init_mm. This means that any reported W&X
addresses are offset by VA_START, which is clearly wrong and can make
them appear like userspace addresses.

Fix this by telling the ptdump code that we're walking init_mm starting
at VA_START. We don't need to update the addr_markers, since these are
still valid bounds regardless.

Fixes: 1404d6f13e47 ("arm64: dump: Add checking for writable and exectuable pages")
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Laura Abbott <labbott@redhat.com>
Reported-by: Timur Tabi <timur@codeaurora.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: Initialise high_memory global variable earlier

commit f24e5834a2c3f6c5f814a417f858226f0a010ade upstream.

The high_memory global variable is used by
cma_declare_contiguous(.) before it is defined.

We don't notice this as we compute __pa(high_memory - 1), and it looks
like we're processing a VA from the direct linear map.

This problem becomes apparent when we flip the kernel virtual address
space and the linear map is moved to the bottom of the kernel VA space.

This patch moves the initialisation of high_memory before it used.

Fixes: f7426b983a6a ("mm: cma: adjust address limit to avoid hitting low/high memory boundary")
Signed-off-by: Steve Capper <steve.capper@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: mm: Fix pte_mkclean, pte_mkdirty semantics

commit 8781bcbc5e69d7da69e84c7044ca0284848d5d01 upstream.

On systems with hardware dirty bit management, the ltp madvise09 unit
test fails due to dirty bit information being lost and pages being
incorrectly freed.

This was bisected to:
arm64: Ignore hardware dirty bit updates in ptep_set_wrprotect()

Reverting this commit leads to a separate problem, that the unit test
retains pages that should have been dropped due to the function
madvise_free_pte_range(.) not cleaning pte's properly.

Currently pte_mkclean only clears the software dirty bit, thus the
following code sequence can appear:

pte = pte_mkclean(pte);
if (pte_dirty(pte))
// this condition can return true with HW DBM!

This patch also adjusts pte_mkclean to set PTE_RDONLY thus effectively
clearing both the SW and HW dirty information.

In order for this to function on systems without HW DBM, we need to
also adjust pte_mkdirty to remove the read only bit from writable pte's
to avoid infinite fault loops.

Fixes: 64c26841b349 ("arm64: Ignore hardware dirty bit updates in ptep_set_wrprotect()")
Reported-by: Bhupinder Thakur <bhupinder.thakur@linaro.org>
Tested-by: Bhupinder Thakur <bhupinder.thakur@linaro.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Steve Capper <steve.capper@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nfs: don't wait on commit in nfs_commit_inode() if there were no commit requests

commit dc4fd9ab01ab379ae5af522b3efd4187a7c30a31 upstream.

If there were no commit requests, then nfs_commit_inode() should not
wait on the commit or mark the inode dirty, otherwise the following
BUG_ON can be triggered:

[ 1917.130762] kernel BUG at fs/inode.c:578!
[ 1917.130766] Oops: Exception in kernel mode, sig: 5 [#1]
[ 1917.130768] SMP NR_CPUS=2048 NUMA pSeries
[ 1917.130772] Modules linked in: iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi blocklayoutdriver rpcsec_gss_krb5 auth_rpcgss nfsv4 dns_resolver nfs lockd grace fscache sunrpc sg nx_crypto pseries_rng ip_tables xfs libcrc32c sd_mod crc_t10dif crct10dif_generic crct10dif_common ibmvscsi scsi_transport_srp ibmveth scsi_tgt dm_mirror dm_region_hash dm_log dm_mod
[ 1917.130805] CPU: 2 PID: 14923 Comm: umount.nfs4 Tainted: G               ------------ T 3.10.0-768.el7.ppc64 #1
[ 1917.130810] task: c0000005ecd88040 ti: c00000004cea0000 task.ti: c00000004cea0000
[ 1917.130813] NIP: c000000000354178 LR: c000000000354160 CTR: c00000000012db80
[ 1917.130816] REGS: c00000004cea3720 TRAP: 0700   Tainted: G               ------------ T  (3.10.0-768.el7.ppc64)
[ 1917.130820] MSR: 8000000100029032 <SF,EE,ME,IR,DR,RI>  CR: 22002822  XER: 20000000
[ 1917.130828] CFAR: c00000000011f594 SOFTE: 1
GPR00: c000000000354160 c00000004cea39a0 c0000000014c4700 c0000000018cc750
GPR04: 000000000000c750 80c0000000000000 0600000000000000 04eeb76bea749a03
GPR08: 0000000000000034 c0000000018cc758 0000000000000001 d000000005e619e8
GPR12: c00000000012db80 c000000007b31200 0000000000000000 0000000000000000
GPR16: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
GPR20: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
GPR24: 0000000000000000 c000000000dfc3ec 0000000000000000 c0000005eefc02c0
GPR28: d0000000079dbd50 c0000005b94a02c0 c0000005b94a0250 c0000005b94a01c8
[ 1917.130867] NIP [c000000000354178] .evict+0x1c8/0x350
[ 1917.130871] LR [c000000000354160] .evict+0x1b0/0x350
[ 1917.130873] Call Trace:
[ 1917.130876] [c00000004cea39a0] [c000000000354160] .evict+0x1b0/0x350 (unreliable)
[ 1917.130880] [c00000004cea3a30] [c0000000003558cc] .evict_inodes+0x13c/0x270
[ 1917.130884] [c00000004cea3af0] [c000000000327d20] .kill_anon_super+0x70/0x1e0
[ 1917.130896] [c00000004cea3b80] [d000000005e43e30] .nfs_kill_super+0x20/0x60 [nfs]
[ 1917.130900] [c00000004cea3c00] [c000000000328a20] .deactivate_locked_super+0xa0/0x1b0
[ 1917.130903] [c00000004cea3c80] [c00000000035ba54] .cleanup_mnt+0xd4/0x180
[ 1917.130907] [c00000004cea3d10] [c000000000119034] .task_work_run+0x114/0x150
[ 1917.130912] [c00000004cea3db0] [c00000000001ba6c] .do_notify_resume+0xcc/0x100
[ 1917.130916] [c00000004cea3e30] [c00000000000a7b0] .ret_from_except_lite+0x5c/0x60
[ 1917.130919] Instruction dump:
[ 1917.130921] 7fc3f378 486734b5 60000000 387f00a0 38800003 4bdcb365 60000000 e95f00a0
[ 1917.130927] 694a0060 7d4a0074 794ad182 694a0001 <0b0a0000> 892d02a4 2f890000 40de0134

Signed-off-by: Scott Mayhew <smayhew@redhat.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

IB/core: Don't enforce PKey security on SMI MADs

commit 0fbe8f575b15585eec3326e43708fbbc024e8486 upstream.

Per the infiniband spec an SMI MAD can have any PKey. Checking the pkey
on SMI MADs is not necessary, and it seems that some older adapters
using the mthca driver don't follow the convention of using the default
PKey, resulting in false denials, or errors querying the PKey cache.

SMI MAD security is still enforced, only agents allowed to manage the
subnet are able to receive or send SMI MADs.

Reported-by: Chris Blake <chrisrblake93@gmail.com>
Fixes: 47a2b338fe63 ("IB/core: Enforce security on management datagrams")
Signed-off-by: Daniel Jurgens <danielj@mellanox.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

IB/core: Bound check alternate path port number

commit 4cae8ff136782d77b108cb3a5ba53e60597ba3a6 upstream.

The alternate port number is used as an array index in the IB
security implementation, invalid values can result in a kernel panic.

Fixes: d291f1a65232 ("IB/core: Enforce PKey security on QPs")
Signed-off-by: Daniel Jurgens <danielj@mellanox.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xhci: Don't add a virt_dev to the devs array before it's fully allocated

commit 5d9b70f7d52eb14bb37861c663bae44de9521c35 upstream.

Avoid null pointer dereference if some function is walking through the
devs array accessing members of a new virt_dev that is mid allocation.

Add the virt_dev to xhci->devs[i] _after_ the virt_device and all its
members are properly allocated.

issue found by KASAN: null-ptr-deref in xhci_find_slot_id_by_port

"Quick analysis suggests that xhci_alloc_virt_device() is not mutex
protected. If so, there is a time frame where xhci->devs[slot_id] is set
but not fully initialized. Specifically, xhci->devs[i]->udev can be NULL."

Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: xhci: fix TDS for MTK xHCI1.1

commit 72b663a99c074a8d073e7ecdae446cfb024ef551 upstream.

For MTK's xHCI 1.0 or latter, TD size is the number of max
packet sized packets remaining in the TD, not including
this TRB (following spec).

For MTK's xHCI 0.96 and older, TD size is the number of max
packet sized packets remaining in the TD, including this TRB
(not following spec).

Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ceph: drop negative child dentries before try pruning inode's alias

commit 040d786032bf59002d374b86d75b04d97624005c upstream.

Negative child dentry holds reference on inode's alias, it makes
d_prune_aliases() do nothing.

Signed-off-by: "Yan, Zheng" <zyan@redhat.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mmc: core: apply NO_CMD23 quirk to some specific cards

commit 91516a2a4734614d62ee3ed921f8f88acc67c000 upstream.

To get an usdhc Apacer and some ATP SD cards work reliable, CMD23 needs
to be disabled.  This has been tested on i.MX6 (sdhci-esdhc) and rk3288
(dw_mmc-rockchip).

Without this patch on i.MX6 (sdhci-esdhc):

 $ dd if=/dev/urandom of=/mnt/test bs=1M count=10 conv=fsync

    | <mmc0: starting CMD23 arg 00000400 flags 00000015>
    | mmc0: starting CMD25 arg 00a71f00 flags 000000b5
    | mmc0:     blksz 512 blocks 1024 flags 00000100 tsac 3000 ms nsac 0
    | mmc0:     CMD12 arg 00000000 flags 0000049d
    | sdhci [sdhci_irq()]: *** mmc0 got interrupt: 0x00000001
    | mmc0: Timeout waiting for hardware interrupt.

Without this patch on rk3288 (dw_mmc-rockchip):

    | mmc1: Card stuck in programming state! mmcblk1 card_busy_detect
    | dwmmc_rockchip ff0c0000.dwmmc: Busy; trying anyway
    | mmc_host mmc1: Bus speed (slot 0) = 400000Hz (slot req 400000Hz,
    | actual 400000HZ div = 0)
    | mmc1: card never left busy state
    | mmc1: tried to reset card, got error -110
    | blk_update_request: I/O error, dev mmcblk1, sector 139778
    | Buffer I/O error on dev mmcblk1p1, logical block 131586, lost async
    | page write

Signed-off-by: Christoph Fritz <chf.fritz@googlemail.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usbip: fix stub_send_ret_submit() vulnerability to null transfer_buffer

commit be6123df1ea8f01ee2f896a16c2b7be3e4557a5a upstream.

stub_send_ret_submit() handles urb with a potential null transfer_buffer,
when it replays a packet with potential malicious data that could contain
a null buffer. Add a check for the condition when actual_length > 0 and
transfer_buffer is null.

Reported-by: Secunia Research <vuln@secunia.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usbip: prevent vhci_hcd driver from leaking a socket pointer address

commit 2f2d0088eb93db5c649d2a5e34a3800a8a935fc5 upstream.

When a client has a USB device attached over IP, the vhci_hcd driver is
locally leaking a socket pointer address via the

/sys/devices/platform/vhci_hcd/status file (world-readable) and in debug
output when "usbip --debug port" is run.

Fix it to not leak. The socket pointer address is not used at the moment
and it was made visible as a convenient way to find IP address from socket
pointer address by looking up /proc/net/{tcp,tcp6}.

As this opens a security hole, the fix replaces socket pointer address with
sockfd.

Reported-by: Secunia Research <vuln@secunia.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usbip: fix stub_rx: harden CMD_SUBMIT path to handle malicious input

commit c6688ef9f29762e65bce325ef4acd6c675806366 upstream.

Harden CMD_SUBMIT path to handle malicious input that could trigger
large memory allocations. Add checks to validate transfer_buffer_length
and number_of_packets to protect against bad input requesting for
unbounded memory allocations. Validate early in get_pipe() and return
failure.

Reported-by: Secunia Research <vuln@secunia.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usbip: fix stub_rx: get_pipe() to validate endpoint number

commit 635f545a7e8be7596b9b2b6a43cab6bbd5a88e43 upstream.

get_pipe() routine doesn't validate the input endpoint number
and uses to reference ep_in and ep_out arrays. Invalid endpoint
number can trigger BUG(). Range check the epnum and returning
error instead of calling BUG().

Change caller stub_recv_cmd_submit() to handle the get_pipe()
error return.

Reported-by: Secunia Research <vuln@secunia.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ovl: update ctx->pos on impure dir iteration

commit b02a16e6413a2f782e542ef60bad9ff6bf212f8a upstream.

This fixes a regression with readdir of impure dir in overlayfs
that is shared to VM via 9p fs.

Reported-by: Miguel Bernal Marin <miguel.bernal.marin@linux.intel.com>
Fixes: 4edb83bb1041 ("ovl: constant d_ino for non-merge dirs")
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Tested-by: Miguel Bernal Marin <miguel.bernal.marin@linux.intel.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ovl: Pass ovl_get_nlink() parameters in right order

commit 08d8f8a5b094b66b29936e8751b4a818b8db1207 upstream.

Right now we seem to be passing index as "lowerdentry" and origin.dentry
as "upperdentry". IIUC, we should pass these parameters in reversed order
and this looks like a bug.

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Acked-by: Amir Goldstein <amir73il@gmail.com>
Fixes: caf70cb2ba5d ("ovl: cleanup orphan index entries")
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: core: prevent malicious bNumInterfaces overflow

commit 48a4ff1c7bb5a32d2e396b03132d20d552c0eca7 upstream.

A malicious USB device with crafted descriptors can cause the kernel
to access unallocated memory by setting the bNumInterfaces value too
high in a configuration descriptor.  Although the value is adjusted
during parsing, this adjustment is skipped in one of the error return
paths.

This patch prevents the problem by setting bNumInterfaces to 0
initially.  The existing code already sets it to the proper value
after parsing is complete.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: uas and storage: Add US_FL_BROKEN_FUA for another JMicron JMS567 ID

commit 62354454625741f0569c2cbe45b2d192f8fd258e upstream.

There is another JMS567-based USB3 UAS enclosure (152d:0578) that fails
with the following error:

[sda] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[sda] tag#0 Sense Key : Illegal Request [current]
[sda] tag#0 Add. Sense: Invalid field in cdb

The issue occurs both with UAS (occasionally) and mass storage
(immediately after mounting a FS on a disk in the enclosure).

Enabling US_FL_BROKEN_FUA quirk solves this issue.

This patch adds an UNUSUAL_DEV with US_FL_BROKEN_FUA for the enclosure
for both UAS and mass storage.

Signed-off-by: David Kozub <zub@linux.fjfi.cvut.cz>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tracing: Allocate mask_str buffer dynamically

commit 90e406f96f630c07d631a021fd4af10aac913e77 upstream.

The default NR_CPUS can be very large, but actual possible nr_cpu_ids
usually is very small. For my x86 distribution, the NR_CPUS is 8192 and
nr_cpu_ids is 4. About 2 pages are wasted.

Most machines don't have so many CPUs, so define a array with NR_CPUS
just wastes memory. So let's allocate the buffer dynamically when need.

With this change, the mutext tracing_cpumask_update_lock also can be
removed now, which was used to protect mask_str.

Link: http://lkml.kernel.org/r/1512013183-19107-1-git-send-email-changbin.du@intel.com
Fixes: 36dfe9252bd4c ("ftrace: make use of tracing_cpumask")
Signed-off-by: Changbin Du <changbin.du@intel.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm, oom_reaper: fix memory corruption

commit 4837fe37adff1d159904f0c013471b1ecbcb455e upstream.

David Rientjes has reported the following memory corruption while the
oom reaper tries to unmap the victims address space

  BUG: Bad page map in process oom_reaper  pte:6353826300000000 pmd:00000000
  addr:00007f50cab1d000 vm_flags:08100073 anon_vma:ffff9eea335603f0 mapping:          (null) index:7f50cab1d
  file:          (null) fault:          (null) mmap:          (null) readpage:          (null)
  CPU: 2 PID: 1001 Comm: oom_reaper
  Call Trace:
     unmap_page_range+0x1068/0x1130
     __oom_reap_task_mm+0xd5/0x16b
     oom_reaper+0xff/0x14c
     kthread+0xc1/0xe0

Tetsuo Handa has noticed that the synchronization inside exit_mmap is
insufficient.  We only synchronize with the oom reaper if
tsk_is_oom_victim which is not true if the final __mmput is called from
a different context than the oom victim exit path.  This can trivially
happen from context of any task which has grabbed mm reference (e.g.  to
read /proc/<pid>/ file which requires mm etc.).

The race would look like this

  oom_reaper oom_victim task
mmget_not_zero
do_exit
  mmput
  __oom_reap_task_mm mmput
     __mmput
    exit_mmap
      remove_vma
    unmap_page_range

Fix this issue by providing a new mm_is_oom_victim() helper which
operates on the mm struct rather than a task.  Any context which
operates on a remote mm struct should use this helper in place of
tsk_is_oom_victim.  The flag is set in mark_oom_victim and never cleared
so it is stable in the exit_mmap path.

Debugged by Tetsuo Handa.

Link: http://lkml.kernel.org/r/20171210095130.17110-1-mhocko@kernel.org
Fixes: 212925802454 ("mm: oom: let oom_reap_task and exit_mmap run concurrently")
Signed-off-by: Michal Hocko <mhocko@suse.com>
Reported-by: David Rientjes <rientjes@google.com>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Andrea Argangeli <andrea@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

kernel: make groups_sort calling a responsibility group_info allocators

commit bdcf0a423ea1c40bbb40e7ee483b50fc8aa3d758 upstream.

In testing, we found that nfsd threads may call set_groups in parallel
for the same entry cached in auth.unix.gid, racing in the call of
groups_sort, corrupting the groups for that entry and leading to
permission denials for the client.

This patch:
 - Make groups_sort globally visible.
 - Move the call to groups_sort to the modifiers of group_info
 - Remove the call to groups_sort from set_groups

Link: http://lkml.kernel.org/r/20171211151420.18655-1-thiago.becker@gmail.com
Signed-off-by: Thiago Rafael Becker <thiago.becker@gmail.com>
Reviewed-by: Matthew Wilcox <mawilcox@microsoft.com>
Reviewed-by: NeilBrown <neilb@suse.com>
Acked-by: "J. Bruce Fields" <bfields@fieldses.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

autofs: fix careless error in recent commit

commit 302ec300ef8a545a7fc7f667e5fd743b091c2eeb upstream.

Commit ecc0c469f277 ("autofs: don't fail mount for transient error") was
meant to replace an 'if' with a 'switch', but instead added the 'switch'
leaving the case in place.

Link: http://lkml.kernel.org/r/87zi6wstmw.fsf@notabene.neil.brown.name
Fixes: ecc0c469f277 ("autofs: don't fail mount for transient error")
Reported-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: NeilBrown <neilb@suse.com>
Cc: Ian Kent <raven@themaw.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

string.h: workaround for increased stack usage

commit 146734b091430c80d80bb96b1139a96fb4bc830e upstream.

The hardened strlen() function causes rather large stack usage in at
least one file in the kernel, in particular when CONFIG_KASAN is
enabled:

  drivers/media/usb/em28xx/em28xx-dvb.c: In function 'em28xx_dvb_init':
  drivers/media/usb/em28xx/em28xx-dvb.c:2062:1: error: the frame size of 3256 bytes is larger than 204 bytes [-Werror=frame-larger-than=]

Analyzing this problem led to the discovery that gcc fails to merge the
stack slots for the i2c_board_info[] structures after we strlcpy() into
them, due to the 'noreturn' attribute on the source string length check.

I reported this as a gcc bug, but it is unlikely to get fixed for gcc-8,
since it is relatively easy to work around, and it gets triggered
rarely.  An earlier workaround I did added an empty inline assembly
statement before the call to fortify_panic(), which works surprisingly
well, but is really ugly and unintuitive.

This is a new approach to the same problem, this time addressing it by
not calling the 'extern __real_strnlen()' function for string constants
where __builtin_strlen() is a compile-time constant and therefore known
to be safe.

We do this by checking if the last character in the string is a
compile-time constant '\0'.  If it is, we can assume that strlen() of
the string is also constant.

As a side-effect, this should also improve the object code output for
any other call of strlen() on a string constant.

[akpm@linux-foundation.org: add comment]
Link: http://lkml.kernel.org/r/20171205215143.3085755-1-arnd@arndb.de
Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=82365
Link: https://patchwork.kernel.org/patch/9980413/
Link: https://patchwork.kernel.org/patch/9974047/
Fixes: 6974f0c4555 ("include/linux/string.h: add the option of fortified string.h functions")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Kees Cook <keescook@chromium.org>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Daniel Micay <danielmicay@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Martin Wilck <mwilck@suse.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cifs: fix NULL deref in SMB2_read

commit a821df3f1af72aa6a0d573eea94a7dd2613e9f4e upstream.

Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

crypto: af_alg - fix NULL pointer dereference in

commit 887207ed9e5812ed9239b6d07185a2d35dda91db upstream.

 af_alg_free_areq_sgls()

If allocating the ->tsgl member of 'struct af_alg_async_req' failed,
during cleanup we dereferenced the NULL ->tsgl pointer in
af_alg_free_areq_sgls(), because ->tsgl_entries was nonzero.

Fix it by only freeing the ->tsgl list if it is non-NULL.

This affected both algif_skcipher and algif_aead.

Fixes: e870456d8e7c ("crypto: algif_skcipher - overhaul memory management")
Fixes: d887c52d6ae4 ("crypto: algif_aead - overhaul memory management")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

crypto: salsa20 - fix blkcipher_walk API usage

commit ecaaab5649781c5a0effdaf298a925063020500e upstream.

When asked to encrypt or decrypt 0 bytes, both the generic and x86
implementations of Salsa20 crash in blkcipher_walk_done(), either when
doing 'kfree(walk->buffer)' or 'free_page((unsigned long)walk->page)',
because walk->buffer and walk->page have not been initialized.

The bug is that Salsa20 is calling blkcipher_walk_done() even when
nothing is in 'walk.nbytes'.  But blkcipher_walk_done() is only meant to
be called when a nonzero number of bytes have been provided.

The broken code is part of an optimization that tries to make only one
call to salsa20_encrypt_bytes() to process inputs that are not evenly
divisible by 64 bytes.  To fix the bug, just remove this "optimization"
and use the blkcipher_walk API the same way all the other users do.

Reproducer:

    #include <linux/if_alg.h>
    #include <sys/socket.h>
    #include <unistd.h>

    int main()
    {
            int algfd, reqfd;
            struct sockaddr_alg addr = {
                    .salg_type = "skcipher",
                    .salg_name = "salsa20",
            };
            char key[16] = { 0 };

            algfd = socket(AF_ALG, SOCK_SEQPACKET, 0);
            bind(algfd, (void *)&addr, sizeof(addr));
            reqfd = accept(algfd, 0, 0);
            setsockopt(algfd, SOL_ALG, ALG_SET_KEY, key, sizeof(key));
            read(reqfd, key, sizeof(key));
    }

Reported-by: syzbot <syzkaller@googlegroups.com>
Fixes: eb6f13eb9f81 ("[CRYPTO] salsa20_generic: Fix multi-page processing")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

crypto: hmac - require that the underlying hash algorithm is unkeyed

commit af3ff8045bbf3e32f1a448542e73abb4c8ceb6f1 upstream.

Because the HMAC template didn't check that its underlying hash
algorithm is unkeyed, trying to use "hmac(hmac(sha3-512-generic))"
through AF_ALG or through KEYCTL_DH_COMPUTE resulted in the inner HMAC
being used without having been keyed, resulting in sha3_update() being
called without sha3_init(), causing a stack buffer overflow.

This is a very old bug, but it seems to have only started causing real
problems when SHA-3 support was added (requires CONFIG_CRYPTO_SHA3)
because the innermost hash's state is ->import()ed from a zeroed buffer,
and it just so happens that other hash algorithms are fine with that,
but SHA-3 is not.  However, there could be arch or hardware-dependent
hash algorithms also affected; I couldn't test everything.

Fix the bug by introducing a function crypto_shash_alg_has_setkey()
which tests whether a shash algorithm is keyed.  Then update the HMAC
template to require that its underlying hash algorithm is unkeyed.

Here is a reproducer:

    #include <linux/if_alg.h>
    #include <sys/socket.h>

    int main()
    {
        int algfd;
        struct sockaddr_alg addr = {
            .salg_type = "hash",
            .salg_name = "hmac(hmac(sha3-512-generic))",
        };
        char key[4096] = { 0 };

        algfd = socket(AF_ALG, SOCK_SEQPACKET, 0);
        bind(algfd, (const struct sockaddr *)&addr, sizeof(addr));
        setsockopt(algfd, SOL_ALG, ALG_SET_KEY, key, sizeof(key));
    }

Here was the KASAN report from syzbot:

    BUG: KASAN: stack-out-of-bounds in memcpy include/linux/string.h:341  [inline]
    BUG: KASAN: stack-out-of-bounds in sha3_update+0xdf/0x2e0  crypto/sha3_generic.c:161
    Write of size 4096 at addr ffff8801cca07c40 by task syzkaller076574/3044

    CPU: 1 PID: 3044 Comm: syzkaller076574 Not tainted 4.14.0-mm1+ #25
    Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS  Google 01/01/2011
    Call Trace:
      __dump_stack lib/dump_stack.c:17 [inline]
      dump_stack+0x194/0x257 lib/dump_stack.c:53
      print_address_description+0x73/0x250 mm/kasan/report.c:252
      kasan_report_error mm/kasan/report.c:351 [inline]
      kasan_report+0x25b/0x340 mm/kasan/report.c:409
      check_memory_region_inline mm/kasan/kasan.c:260 [inline]
      check_memory_region+0x137/0x190 mm/kasan/kasan.c:267
      memcpy+0x37/0x50 mm/kasan/kasan.c:303
      memcpy include/linux/string.h:341 [inline]
      sha3_update+0xdf/0x2e0 crypto/sha3_generic.c:161
      crypto_shash_update+0xcb/0x220 crypto/shash.c:109
      shash_finup_unaligned+0x2a/0x60 crypto/shash.c:151
      crypto_shash_finup+0xc4/0x120 crypto/shash.c:165
      hmac_finup+0x182/0x330 crypto/hmac.c:152
      crypto_shash_finup+0xc4/0x120 crypto/shash.c:165
      shash_digest_unaligned+0x9e/0xd0 crypto/shash.c:172
      crypto_shash_digest+0xc4/0x120 crypto/shash.c:186
      hmac_setkey+0x36a/0x690 crypto/hmac.c:66
      crypto_shash_setkey+0xad/0x190 crypto/shash.c:64
      shash_async_setkey+0x47/0x60 crypto/shash.c:207
      crypto_ahash_setkey+0xaf/0x180 crypto/ahash.c:200
      hash_setkey+0x40/0x90 crypto/algif_hash.c:446
      alg_setkey crypto/af_alg.c:221 [inline]
      alg_setsockopt+0x2a1/0x350 crypto/af_alg.c:254
      SYSC_setsockopt net/socket.c:1851 [inline]
      SyS_setsockopt+0x189/0x360 net/socket.c:1830
      entry_SYSCALL_64_fastpath+0x1f/0x96

Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

crypto: rsa - fix buffer overread when stripping leading zeroes

commit d2890c3778b164fde587bc16583f3a1c87233ec5 upstream.

In rsa_get_n(), if the buffer contained all 0's and "FIPS mode" is
enabled, we would read one byte past the end of the buffer while
scanning the leading zeroes.  Fix it by checking 'n_sz' before '!*ptr'.

This bug was reachable by adding a specially crafted key of type
"asymmetric" (requires CONFIG_RSA and CONFIG_X509_CERTIFICATE_PARSER).

KASAN report:

    BUG: KASAN: slab-out-of-bounds in rsa_get_n+0x19e/0x1d0 crypto/rsa_helper.c:33
    Read of size 1 at addr ffff88003501a708 by task keyctl/196

    CPU: 1 PID: 196 Comm: keyctl Not tainted 4.14.0-09238-g1d3b78bbc6e9 #26
    Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-20171110_100015-anatol 04/01/2014
    Call Trace:
     rsa_get_n+0x19e/0x1d0 crypto/rsa_helper.c:33
     asn1_ber_decoder+0x82a/0x1fd0 lib/asn1_decoder.c:328
     rsa_set_pub_key+0xd3/0x320 crypto/rsa.c:278
     crypto_akcipher_set_pub_key ./include/crypto/akcipher.h:364 [inline]
     pkcs1pad_set_pub_key+0xae/0x200 crypto/rsa-pkcs1pad.c:117
     crypto_akcipher_set_pub_key ./include/crypto/akcipher.h:364 [inline]
     public_key_verify_signature+0x270/0x9d0 crypto/asymmetric_keys/public_key.c:106
     x509_check_for_self_signed+0x2ea/0x480 crypto/asymmetric_keys/x509_public_key.c:141
     x509_cert_parse+0x46a/0x620 crypto/asymmetric_keys/x509_cert_parser.c:129
     x509_key_preparse+0x61/0x750 crypto/asymmetric_keys/x509_public_key.c:174
     asymmetric_key_preparse+0xa4/0x150 crypto/asymmetric_keys/asymmetric_type.c:388
     key_create_or_update+0x4d4/0x10a0 security/keys/key.c:850
     SYSC_add_key security/keys/keyctl.c:122 [inline]
     SyS_add_key+0xe8/0x290 security/keys/keyctl.c:62
     entry_SYSCALL_64_fastpath+0x1f/0x96

    Allocated by task 196:
     __do_kmalloc mm/slab.c:3711 [inline]
     __kmalloc_track_caller+0x118/0x2e0 mm/slab.c:3726
     kmemdup+0x17/0x40 mm/util.c:118
     kmemdup ./include/linux/string.h:414 [inline]
     x509_cert_parse+0x2cb/0x620 crypto/asymmetric_keys/x509_cert_parser.c:106
     x509_key_preparse+0x61/0x750 crypto/asymmetric_keys/x509_public_key.c:174
     asymmetric_key_preparse+0xa4/0x150 crypto/asymmetric_keys/asymmetric_type.c:388
     key_create_or_update+0x4d4/0x10a0 security/keys/key.c:850
     SYSC_add_key security/keys/keyctl.c:122 [inline]
     SyS_add_key+0xe8/0x290 security/keys/keyctl.c:62
     entry_SYSCALL_64_fastpath+0x1f/0x96

Fixes: 5a7de97309f5 ("crypto: rsa - return raw integers for the ASN.1 parser")
Cc: Tudor Ambarus <tudor-dan.ambarus@nxp.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: James Morris <james.l.morris@oracle.com>
Reviewed-by: David Howells <dhowells@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

crypto: algif_aead - fix reference counting of null skcipher

commit b32a7dc8aef1882fbf983eb354837488cc9d54dc upstream.

In the AEAD interface for AF_ALG, the reference to the "null skcipher"
held by each tfm was being dropped in the wrong place -- when each
af_alg_ctx was freed instead of when the aead_tfm was freed.  As
discovered by syzkaller, a specially crafted program could use this to
cause the null skcipher to be freed while it is still in use.

Fix it by dropping the reference in the right place.

Fixes: 72548b093ee3 ("crypto: algif_aead - copy AAD from src to dst")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mfd: fsl-imx25: Clean up irq settings during removal

commit 18f77393796848e68909e65d692c1d1436f06e06 upstream.

When fsl-imx25-tsadc is compiled as a module, loading, unloading and
reloading the module will lead to a crash.

Unable to handle kernel paging request at virtual address bf005430
[<c004df6c>] (irq_find_matching_fwspec)
   from [<c028d5ec>] (of_irq_get+0x58/0x74)
[<c028d594>] (of_irq_get)
   from [<c01ff970>] (platform_get_irq+0x48/0xc8)
[<c01ff928>] (platform_get_irq)
   from [<bf00e33c>] (mx25_tsadc_probe+0x220/0x2f4 [fsl_imx25_tsadc])

irq_find_matching_fwspec() loops over all registered irq domains. The
irq domain is still registered from last time the module was loaded but
the pointer to its operations is invalid after the module was unloaded.

Add a removal function which clears the irq handler and removes the irq
domain. With this cleanup in place, it's possible to unload and reload
the module.

Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 4.14.7

dvb_frontend: don't use-after-free the frontend struct

commit b1cb7372fa822af6c06c8045963571d13ad6348b upstream.

dvb_frontend_invoke_release() may free the frontend struct.
So, the free logic can't update it anymore after calling it.

That's OK, as __dvb_frontend_free() is called only when the
krefs are zeroed, so nobody is using it anymore.

That should fix the following KASAN error:

The KASAN report looks like this (running on kernel 3e0cc09a3a2c40ec1ffb6b4e12da86e98feccb11 (4.14-rc5+)):
==================================================================
BUG: KASAN: use-after-free in __dvb_frontend_free+0x113/0x120
Write of size 8 at addr ffff880067d45a00 by task kworker/0:1/24

CPU: 0 PID: 24 Comm: kworker/0:1 Not tainted 4.14.0-rc5-43687-g06ab8a23e0e6 #545
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
Workqueue: usb_hub_wq hub_event
Call Trace:
 __dump_stack lib/dump_stack.c:16
 dump_stack+0x292/0x395 lib/dump_stack.c:52
 print_address_description+0x78/0x280 mm/kasan/report.c:252
 kasan_report_error mm/kasan/report.c:351
 kasan_report+0x23d/0x350 mm/kasan/report.c:409
 __asan_report_store8_noabort+0x1c/0x20 mm/kasan/report.c:435
 __dvb_frontend_free+0x113/0x120 drivers/media/dvb-core/dvb_frontend.c:156
 dvb_frontend_put+0x59/0x70 drivers/media/dvb-core/dvb_frontend.c:176
 dvb_frontend_detach+0x120/0x150 drivers/media/dvb-core/dvb_frontend.c:2803
 dvb_usb_adapter_frontend_exit+0xd6/0x160 drivers/media/usb/dvb-usb/dvb-usb-dvb.c:340
 dvb_usb_adapter_exit drivers/media/usb/dvb-usb/dvb-usb-init.c:116
 dvb_usb_exit+0x9b/0x200 drivers/media/usb/dvb-usb/dvb-usb-init.c:132
 dvb_usb_device_exit+0xa5/0xf0 drivers/media/usb/dvb-usb/dvb-usb-init.c:295
 usb_unbind_interface+0x21c/0xa90 drivers/usb/core/driver.c:423
 __device_release_driver drivers/base/dd.c:861
 device_release_driver_internal+0x4f1/0x5c0 drivers/base/dd.c:893
 device_release_driver+0x1e/0x30 drivers/base/dd.c:918
 bus_remove_device+0x2f4/0x4b0 drivers/base/bus.c:565
 device_del+0x5c4/0xab0 drivers/base/core.c:1985
 usb_disable_device+0x1e9/0x680 drivers/usb/core/message.c:1170
 usb_disconnect+0x260/0x7a0 drivers/usb/core/hub.c:2124
 hub_port_connect drivers/usb/core/hub.c:4754
 hub_port_connect_change drivers/usb/core/hub.c:5009
 port_event drivers/usb/core/hub.c:5115
 hub_event+0x1318/0x3740 drivers/usb/core/hub.c:5195
 process_one_work+0xc73/0x1d90 kernel/workqueue.c:2119
 worker_thread+0x221/0x1850 kernel/workqueue.c:2253
 kthread+0x363/0x440 kernel/kthread.c:231
 ret_from_fork+0x2a/0x40 arch/x86/entry/entry_64.S:431

Allocated by task 24:
 save_stack_trace+0x1b/0x20 arch/x86/kernel/stacktrace.c:59
 save_stack+0x43/0xd0 mm/kasan/kasan.c:447
 set_track mm/kasan/kasan.c:459
 kasan_kmalloc+0xad/0xe0 mm/kasan/kasan.c:551
 kmem_cache_alloc_trace+0x11e/0x2d0 mm/slub.c:2772
 kmalloc ./include/linux/slab.h:493
 kzalloc ./include/linux/slab.h:666
 dtt200u_fe_attach+0x4c/0x110 drivers/media/usb/dvb-usb/dtt200u-fe.c:212
 dtt200u_frontend_attach+0x35/0x80 drivers/media/usb/dvb-usb/dtt200u.c:136
 dvb_usb_adapter_frontend_init+0x32b/0x660 drivers/media/usb/dvb-usb/dvb-usb-dvb.c:286
 dvb_usb_adapter_init drivers/media/usb/dvb-usb/dvb-usb-init.c:86
 dvb_usb_init drivers/media/usb/dvb-usb/dvb-usb-init.c:162
 dvb_usb_device_init+0xf73/0x17f0 drivers/media/usb/dvb-usb/dvb-usb-init.c:277
 dtt200u_usb_probe+0xa1/0xe0 drivers/media/usb/dvb-usb/dtt200u.c:155
 usb_probe_interface+0x35d/0x8e0 drivers/usb/core/driver.c:361
 really_probe drivers/base/dd.c:413
 driver_probe_device+0x610/0xa00 drivers/base/dd.c:557
 __device_attach_driver+0x230/0x290 drivers/base/dd.c:653
 bus_for_each_drv+0x161/0x210 drivers/base/bus.c:463
 __device_attach+0x26b/0x3c0 drivers/base/dd.c:710
 device_initial_probe+0x1f/0x30 drivers/base/dd.c:757
 bus_probe_device+0x1eb/0x290 drivers/base/bus.c:523
 device_add+0xd0b/0x1660 drivers/base/core.c:1835
 usb_set_configuration+0x104e/0x1870 drivers/usb/core/message.c:1932
 generic_probe+0x73/0xe0 drivers/usb/core/generic.c:174
 usb_probe_device+0xaf/0xe0 drivers/usb/core/driver.c:266
 really_probe drivers/base/dd.c:413
 driver_probe_device+0x610/0xa00 drivers/base/dd.c:557
 __device_attach_driver+0x230/0x290 drivers/base/dd.c:653
 bus_for_each_drv+0x161/0x210 drivers/base/bus.c:463
 __device_attach+0x26b/0x3c0 drivers/base/dd.c:710
 device_initial_probe+0x1f/0x30 drivers/base/dd.c:757
 bus_probe_device+0x1eb/0x290 drivers/base/bus.c:523
 device_add+0xd0b/0x1660 drivers/base/core.c:1835
 usb_new_device+0x7b8/0x1020 drivers/usb/core/hub.c:2457
 hub_port_connect drivers/usb/core/hub.c:4903
 hub_port_connect_change drivers/usb/core/hub.c:5009
 port_event drivers/usb/core/hub.c:5115
 hub_event+0x194d/0x3740 drivers/usb/core/hub.c:5195
 process_one_work+0xc73/0x1d90 kernel/workqueue.c:2119
 worker_thread+0x221/0x1850 kernel/workqueue.c:2253
 kthread+0x363/0x440 kernel/kthread.c:231
 ret_from_fork+0x2a/0x40 arch/x86/entry/entry_64.S:431

Freed by task 24:
 save_stack_trace+0x1b/0x20 arch/x86/kernel/stacktrace.c:59
 save_stack+0x43/0xd0 mm/kasan/kasan.c:447
 set_track mm/kasan/kasan.c:459
 kasan_slab_free+0x72/0xc0 mm/kasan/kasan.c:524
 slab_free_hook mm/slub.c:1390
 slab_free_freelist_hook mm/slub.c:1412
 slab_free mm/slub.c:2988
 kfree+0xf6/0x2f0 mm/slub.c:3919
 dtt200u_fe_release+0x3c/0x50 drivers/media/usb/dvb-usb/dtt200u-fe.c:202
 dvb_frontend_invoke_release.part.13+0x1c/0x30 drivers/media/dvb-core/dvb_frontend.c:2790
 dvb_frontend_invoke_release drivers/media/dvb-core/dvb_frontend.c:2789
 __dvb_frontend_free+0xad/0x120 drivers/media/dvb-core/dvb_frontend.c:153
 dvb_frontend_put+0x59/0x70 drivers/media/dvb-core/dvb_frontend.c:176
 dvb_frontend_detach+0x120/0x150 drivers/media/dvb-core/dvb_frontend.c:2803
 dvb_usb_adapter_frontend_exit+0xd6/0x160 drivers/media/usb/dvb-usb/dvb-usb-dvb.c:340
 dvb_usb_adapter_exit drivers/media/usb/dvb-usb/dvb-usb-init.c:116
 dvb_usb_exit+0x9b/0x200 drivers/media/usb/dvb-usb/dvb-usb-init.c:132
 dvb_usb_device_exit+0xa5/0xf0 drivers/media/usb/dvb-usb/dvb-usb-init.c:295
 usb_unbind_interface+0x21c/0xa90 drivers/usb/core/driver.c:423
 __device_release_driver drivers/base/dd.c:861
 device_release_driver_internal+0x4f1/0x5c0 drivers/base/dd.c:893
 device_release_driver+0x1e/0x30 drivers/base/dd.c:918
 bus_remove_device+0x2f4/0x4b0 drivers/base/bus.c:565
 device_del+0x5c4/0xab0 drivers/base/core.c:1985
 usb_disable_device+0x1e9/0x680 drivers/usb/core/message.c:1170
 usb_disconnect+0x260/0x7a0 drivers/usb/core/hub.c:2124
 hub_port_connect drivers/usb/core/hub.c:4754
 hub_port_connect_change drivers/usb/core/hub.c:5009
 port_event drivers/usb/core/hub.c:5115
 hub_event+0x1318/0x3740 drivers/usb/core/hub.c:5195
 process_one_work+0xc73/0x1d90 kernel/workqueue.c:2119
 worker_thread+0x221/0x1850 kernel/workqueue.c:2253
 kthread+0x363/0x440 kernel/kthread.c:231
 ret_from_fork+0x2a/0x40 arch/x86/entry/entry_64.S:431

The buggy address belongs to the object at ffff880067d45500
 which belongs to the cache kmalloc-2048 of size 2048
The buggy address is located 1280 bytes inside of
 2048-byte region [ffff880067d45500, ffff880067d45d00)
The buggy address belongs to the page:
page:ffffea00019f5000 count:1 mapcount:0 mapping:          (null)
index:0x0 compound_mapcount: 0
flags: 0x100000000008100(slab|head)
raw: 0100000000008100 0000000000000000 0000000000000000 00000001000f000f
raw: dead000000000100 dead000000000200 ffff88006c002d80 0000000000000000
page dumped because: kasan: bad access detected

Memory state around the buggy address:
 ffff880067d45900: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
 ffff880067d45980: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
 ffff880067d45a00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
                   ^
 ffff880067d45a80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
 ffff880067d45b00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
==================================================================

Fixes: ead666000a5f ("media: dvb_frontend: only use kref after initialized")

Reported-by: Andrey Konovalov <andreyknvl@google.com>
Suggested-by: Matthias Schwarzott <zzam@gentoo.org>
Tested-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: dvb-core: always call invoke_release() in fe_free()

commit 62229de19ff2b7f3e0ebf4d48ad99061127d0281 upstream.

Follow-up to: ead666000a5f ("media: dvb_frontend: only use kref after initialized")

The aforementioned commit fixed refcount OOPSes when demod driver attaching
succeeded but tuner driver didn't. However, the use count of the attached
demod drivers don't go back to zero and thus couldn't be cleanly unloaded.
Improve on this by calling dvb_frontend_invoke_release() in
__dvb_frontend_free() regardless of fepriv being NULL, instead of returning
when fepriv is NULL. This is safe to do since _invoke_release() will check
for passed pointers being valid before calling the .release() function.

[mchehab@s-opensource.com: changed the logic a little bit to reduce
 conflicts with another bug fix patch under review]
Fixes: ead666000a5f ("media: dvb_frontend: only use kref after initialized")
Signed-off-by: Daniel Scheller <d.scheller@gmx.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/intel_rdt: Fix potential deadlock during resctrl unmount

[ Upstream commit 36b6f9fcb8928c06b6638a4cf91bc9d69bb49aa2 ]

Lockdep warns about a potential deadlock:

[   66.782842] ======================================================
[   66.782888] WARNING: possible circular locking dependency detected
[   66.782937] 4.14.0-rc2-test-test+ #48 Not tainted
[   66.782983] ------------------------------------------------------
[   66.783052] umount/336 is trying to acquire lock:
[   66.783117]  (cpu_hotplug_lock.rw_sem){++++}, at: [<ffffffff81032395>] rdt_kill_sb+0x215/0x390
[   66.783193]
               but task is already holding lock:
[   66.783244]  (rdtgroup_mutex){+.+.}, at: [<ffffffff810321b6>] rdt_kill_sb+0x36/0x390
[   66.783305]
               which lock already depends on the new lock.

[   66.783364]
               the existing dependency chain (in reverse order) is:
[   66.783419]
               -> #3 (rdtgroup_mutex){+.+.}:
[   66.783467]        __lock_acquire+0x1293/0x13f0
[   66.783509]        lock_acquire+0xaf/0x220
[   66.783543]        __mutex_lock+0x71/0x9b0
[   66.783575]        mutex_lock_nested+0x1b/0x20
[   66.783610]        intel_rdt_online_cpu+0x3b/0x430
[   66.783649]        cpuhp_invoke_callback+0xab/0x8e0
[   66.783687]        cpuhp_thread_fun+0x7a/0x150
[   66.783722]        smpboot_thread_fn+0x1cc/0x270
[   66.783764]        kthread+0x16e/0x190
[   66.783794]        ret_from_fork+0x27/0x40
[   66.783825]
               -> #2 (cpuhp_state){+.+.}:
[   66.783870]        __lock_acquire+0x1293/0x13f0
[   66.783906]        lock_acquire+0xaf/0x220
[   66.783938]        cpuhp_issue_call+0x102/0x170
[   66.783974]        __cpuhp_setup_state_cpuslocked+0x154/0x2a0
[   66.784023]        __cpuhp_setup_state+0xc7/0x170
[   66.784061]        page_writeback_init+0x43/0x67
[   66.784097]        pagecache_init+0x43/0x4a
[   66.784131]        start_kernel+0x3ad/0x3f7
[   66.784165]        x86_64_start_reservations+0x2a/0x2c
[   66.784204]        x86_64_start_kernel+0x72/0x75
[   66.784241]        verify_cpu+0x0/0xfb
[   66.784270]
               -> #1 (cpuhp_state_mutex){+.+.}:
[   66.784319]        __lock_acquire+0x1293/0x13f0
[   66.784355]        lock_acquire+0xaf/0x220
[   66.784387]        __mutex_lock+0x71/0x9b0
[   66.784419]        mutex_lock_nested+0x1b/0x20
[   66.784454]        __cpuhp_setup_state_cpuslocked+0x52/0x2a0
[   66.784497]        __cpuhp_setup_state+0xc7/0x170
[   66.784535]        page_alloc_init+0x28/0x30
[   66.784569]        start_kernel+0x148/0x3f7
[   66.784602]        x86_64_start_reservations+0x2a/0x2c
[   66.784642]        x86_64_start_kernel+0x72/0x75
[   66.784678]        verify_cpu+0x0/0xfb
[   66.784707]
               -> #0 (cpu_hotplug_lock.rw_sem){++++}:
[   66.784759]        check_prev_add+0x32f/0x6e0
[   66.784794]        __lock_acquire+0x1293/0x13f0
[   66.784830]        lock_acquire+0xaf/0x220
[   66.784863]        cpus_read_lock+0x3d/0xb0
[   66.784896]        rdt_kill_sb+0x215/0x390
[   66.784930]        deactivate_locked_super+0x3e/0x70
[   66.784968]        deactivate_super+0x40/0x60
[   66.785003]        cleanup_mnt+0x3f/0x80
[   66.785034]        __cleanup_mnt+0x12/0x20
[   66.785070]        task_work_run+0x8b/0xc0
[   66.785103]        exit_to_usermode_loop+0x94/0xa0
[   66.786804]        syscall_return_slowpath+0xe8/0x150
[   66.788502]        entry_SYSCALL_64_fastpath+0xab/0xad
[   66.790194]
               other info that might help us debug this:

[   66.795139] Chain exists of:
                 cpu_hotplug_lock.rw_sem --> cpuhp_state --> rdtgroup_mutex

[   66.800035]  Possible unsafe locking scenario:

[   66.803267]        CPU0                    CPU1
[   66.804867]        ----                    ----
[   66.806443]   lock(rdtgroup_mutex);
[   66.808002]                                lock(cpuhp_state);
[   66.809565]                                lock(rdtgroup_mutex);
[   66.811110]   lock(cpu_hotplug_lock.rw_sem);
[   66.812608]
                *** DEADLOCK ***

[   66.816983] 2 locks held by umount/336:
[   66.818418]  #0:  (&type->s_umount_key#35){+.+.}, at: [<ffffffff81229738>] deactivate_super+0x38/0x60
[   66.819922]  #1:  (rdtgroup_mutex){+.+.}, at: [<ffffffff810321b6>] rdt_kill_sb+0x36/0x390

When the resctrl filesystem is unmounted the locks should be obtain in the
locks in the same order as was done when the cpus came online:

      cpu_hotplug_lock before rdtgroup_mutex.

This also requires to switch the static_branch_disable() calls to the
_cpulocked variant because now cpu hotplug lock is held already.

[ tglx: Switched to cpus_read_[un]lock ]

Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com>
Acked-by: Vikas Shivappa <vikas.shivappa@linux.intel.com>
Acked-by: Fenghua Yu <fenghua.yu@intel.com>
Acked-by: Tony Luck <tony.luck@intel.com>
Link: https://lkml.kernel.org/r/cc292e76be073f7260604651711c47b09fd0dc81.1508490116.git.reinette.chatre@intel.com
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

RDMA/cxgb4: Annotate r2 and stag as __be32

[ Upstream commit 7d7d065a5eec7e218174d5c64a9f53f99ffdb119 ]

Chelsio cxgb4 HW is big-endian, hence there is need to properly
annotate r2 and stag fields as __be32 and not __u32 to fix the
following sparse warnings.

  drivers/infiniband/hw/cxgb4/qp.c:614:16:
    warning: incorrect type in assignment (different base types)
      expected unsigned int [unsigned] [usertype] r2
      got restricted __be32 [usertype] <noident>
  drivers/infiniband/hw/cxgb4/qp.c:615:18:
    warning: incorrect type in assignment (different base types)
      expected unsigned int [unsigned] [usertype] stag
      got restricted __be32 [usertype] <noident>

Cc: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

md: free unused memory after bitmap resize

[ Upstream commit 0868b99c214a3d55486c700de7c3f770b7243e7c ]

When bitmap is resized, the old kalloced chunks just are not released
once the resized bitmap starts to use new space.

This fixes in particular kmemleak reports like this one:

unreferenced object 0xffff8f4311e9c000 (size 4096):
  comm "lvm", pid 19333, jiffies 4295263268 (age 528.265s)
  hex dump (first 32 bytes):
    02 80 02 80 02 80 02 80 02 80 02 80 02 80 02 80  ................
    02 80 02 80 02 80 02 80 02 80 02 80 02 80 02 80  ................
  backtrace:
    [<ffffffffa69471ca>] kmemleak_alloc+0x4a/0xa0
    [<ffffffffa628c10e>] kmem_cache_alloc_trace+0x14e/0x2e0
    [<ffffffffa676cfec>] bitmap_checkpage+0x7c/0x110
    [<ffffffffa676d0c5>] bitmap_get_counter+0x45/0xd0
    [<ffffffffa676d6b3>] bitmap_set_memory_bits+0x43/0xe0
    [<ffffffffa676e41c>] bitmap_init_from_disk+0x23c/0x530
    [<ffffffffa676f1ae>] bitmap_load+0xbe/0x160
    [<ffffffffc04c47d3>] raid_preresume+0x203/0x2f0 [dm_raid]
    [<ffffffffa677762f>] dm_table_resume_targets+0x4f/0xe0
    [<ffffffffa6774b52>] dm_resume+0x122/0x140
    [<ffffffffa6779b9f>] dev_suspend+0x18f/0x290
    [<ffffffffa677a3a7>] ctl_ioctl+0x287/0x560
    [<ffffffffa677a693>] dm_ctl_ioctl+0x13/0x20
    [<ffffffffa62d6b46>] do_vfs_ioctl+0xa6/0x750
    [<ffffffffa62d7269>] SyS_ioctl+0x79/0x90
    [<ffffffffa6956d41>] entry_SYSCALL_64_fastpath+0x1f/0xc2

Signed-off-by: Zdenek Kabelac <zkabelac@redhat.com>
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dm raid: fix panic when attempting to force a raid to sync

[ Upstream commit 233978449074ca7e45d9c959f9ec612d1b852893 ]

Requesting a sync on an active raid device via a table reload
(see 'sync' parameter in Documentation/device-mapper/dm-raid.txt)
skips the super_load() call that defines the superblock size
(rdev->sb_size) -- resulting in an oops if/when super_sync()->memset()
is called.

Fix by moving the initialization of the superblock start and size
out of super_load() to the caller (analyse_superblocks).

Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

audit: ensure that 'audit=1' actually enables audit for PID 1

[ Upstream commit 173743dd99a49c956b124a74c8aacb0384739a4c ]

Prior to this patch we enabled audit in audit_init(), which is too
late for PID 1 as the standard initcalls are run after the PID 1 task
is forked.  This means that we never allocate an audit_context (see
audit_alloc()) for PID 1 and therefore miss a lot of audit events
generated by PID 1.

This patch enables audit as early as possible to help ensure that when
PID 1 is forked it can allocate an audit_context if required.

Reviewed-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

audit: Allow auditd to set pid to 0 to end auditing

[ Upstream commit 33e8a907804428109ce1d12301c3365d619cc4df ]

The API to end auditing has historically been for auditd to set the
pid to 0. This patch restores that functionality.

See: https://github.com/linux-audit/audit-kernel/issues/69

Reviewed-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Steve Grubb <sgrubb@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nvmet-rdma: update queue list during ib_device removal

[ Upstream commit 43b92fd27aaef0f529c9321cfebbaec1d7b8f503 ]

A NULL deref happens when nvmet_rdma_remove_one() is called more than once
(e.g. while connected via 2 ports).
The first call frees the queues related to the first ib_device but
doesn't remove them from the queue list.
While calling nvmet_rdma_remove_one() for the second ib_device it goes over
the full queue list again and we get the NULL deref.

Fixes: f1d4ef7d ("nvmet-rdma: register ib_client to not deadlock in device removal")
Signed-off-by: Israel Rukshin <israelr@mellanox.com>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Reviewed-by: Sagi Grimberg <sagi@grmberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

blk-mq: Avoid that request queue removal can trigger list corruption

[ Upstream commit aba7afc5671c23beade64d10caf86e24a9105dab ]

Avoid that removal of a request queue sporadically triggers the
following warning:

list_del corruption. next->prev should be ffff8807d649b970, but was 6b6b6b6b6b6b6b6b
WARNING: CPU: 3 PID: 342 at lib/list_debug.c:56 __list_del_entry_valid+0x92/0xa0
Call Trace:
 process_one_work+0x11b/0x660
 worker_thread+0x3d/0x3b0
 kthread+0x129/0x140
 ret_from_fork+0x27/0x40

Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ide: ide-atapi: fix compile error with defining macro DEBUG

[ Upstream commit 8dc7a31fbce5e2dbbacd83d910da37105181b054 ]

Compile ide-atapi failed with defining macro "DEBUG"
...
|drivers/ide/ide-atapi.c:285:52: error: 'struct request' has
no member named 'cmd'; did you mean 'csd'?
|  debug_log("%s: rq->cmd[0]: 0x%x\n", __func__, rq->cmd[0]);
...

Since we split the scsi_request out of struct request, it missed
do the same thing on debug_log

Fixes: 82ed4db499b8 ("block: split scsi_request out of struct request")

Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipvlan: fix ipv6 outbound device

[ Upstream commit ca29fd7cce5a6444d57fb86517589a1a31c759e1 ]

When process the outbound packet of ipv6, we should assign the master
device to output device other than input device.

Signed-off-by: Keefe Liu <liuqifa@huawei.com>
Acked-by: Mahesh Bandewar <maheshb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/powernv/idle: Round up latency and residency values

[ Upstream commit 8d4e10e9ed9450e18fbbf6a8872be0eac9fd4999 ]

On PowerNV platforms, firmware provides exit latency and
target residency for each of the idle states in nano
seconds.  Cpuidle framework expects the values in micro
seconds.  Round up to nearest micro seconds to avoid errors
in cases where the values are defined as fractional micro
seconds.

Default idle state of 'snooze' has exit latency of zero.  If
other states have fractional micro second exit latency, they
would get rounded down to zero micro second and make cpuidle
framework choose deeper idle state when snooze loop is the
right choice.

Reported-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com>
Reviewed-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

kbuild: do not call cc-option before KBUILD_CFLAGS initialization

[ Upstream commit 433dc2ebe7d17dd21cba7ad5c362d37323592236 ]

Some $(call cc-option,...) are invoked very early, even before
KBUILD_CFLAGS, etc. are initialized.

The returned string from $(call cc-option,...) depends on
KBUILD_CPPFLAGS, KBUILD_CFLAGS, and GCC_PLUGINS_CFLAGS.

Since they are exported, they are not empty when the top Makefile
is recursively invoked.

The recursion occurs in several places.  For example, the top
Makefile invokes itself for silentoldconfig.  "make tinyconfig",
"make rpm-pkg" are the cases, too.

In those cases, the second call of cc-option from the same line
runs a different shell command due to non-pristine KBUILD_CFLAGS.

To get the same result all the time, KBUILD_* and GCC_PLUGINS_CFLAGS
must be initialized before any call of cc-option.  This avoids
garbage data in the .cache.mk file.

Move all calls of cc-option below the config targets because target
compiler flags are unnecessary for Kconfig.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: arm/arm64: vgic-its: Preserve the revious read from the pending table

commit 64afe6e9eb4841f35317da4393de21a047a883b3 upstream.

The current pending table parsing code assumes that we keep the
previous read of the pending bits, but keep that variable in
the current block, making sure it is discarded on each loop.

We end-up using whatever is on the stack. Who knows, it might
just be the right thing...

Fixes: 33d3bc9556a7d ("KVM: arm64: vgic-its: Read initial LPI pending table")
Reported-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fix kcm_clone()

commit a5739435b5a3b8c449f8844ecd71a3b1e89f0a33 upstream.

1) it's fput() or sock_release(), not both
2) don't do fd_install() until the last failure exit.
3) not a bug per se, but... don't attach socket to struct file
   until it's set up.

Take reserving descriptor into the caller, move fd_install() to the
caller, sanitize failure exits and calling conventions.

Acked-by: Tom Herbert <tom@herbertland.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fcntl: don't cap l_start and l_end values for F_GETLK64 in compat syscall

commit 4d2dc2cc766c3b51929658cacbc6e34fc8e242fb upstream.

Currently, we're capping the values too low in the F_GETLK64 case. The
fields in that structure are 64-bit values, so we shouldn't need to do
any sort of fixup there.

Make sure we check that assumption at build time in the future however
by ensuring that the sizes we're copying will fit.

With this, we no longer need COMPAT_LOFF_T_MAX either, so remove it.

Fixes: 94073ad77fff2 (fs/locks: don't mess with the address limit in compat_fcntl64)
Reported-by: Vitaly Lipatov <lav@etersoft.ru>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: David Howells <dhowells@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: gadget: ffs: Forbid usb_ep_alloc_request from sleeping

commit 30bf90ccdec1da9c8198b161ecbff39ce4e5a9ba upstream.

Found using DEBUG_ATOMIC_SLEEP while submitting an AIO read operation:

[  100.853642] BUG: sleeping function called from invalid context at mm/slab.h:421
[  100.861148] in_atomic(): 1, irqs_disabled(): 1, pid: 1880, name: python
[  100.867954] 2 locks held by python/1880:
[  100.867961]  #0:  (&epfile->mutex){....}, at: [<f8188627>] ffs_mutex_lock+0x27/0x30 [usb_f_fs]
[  100.868020]  #1:  (&(&ffs->eps_lock)->rlock){....}, at: [<f818ad4b>] ffs_epfile_io.isra.17+0x24b/0x590 [usb_f_fs]
[  100.868076] CPU: 1 PID: 1880 Comm: python Not tainted 4.14.0-edison+ #118
[  100.868085] Hardware name: Intel Corporation Merrifield/BODEGA BAY, BIOS 542 2015.01.21:18.19.48
[  100.868093] Call Trace:
[  100.868122]  dump_stack+0x47/0x62
[  100.868156]  ___might_sleep+0xfd/0x110
[  100.868182]  __might_sleep+0x68/0x70
[  100.868217]  kmem_cache_alloc_trace+0x4b/0x200
[  100.868248]  ? dwc3_gadget_ep_alloc_request+0x24/0xe0 [dwc3]
[  100.868302]  dwc3_gadget_ep_alloc_request+0x24/0xe0 [dwc3]
[  100.868343]  usb_ep_alloc_request+0x16/0xc0 [udc_core]
[  100.868386]  ffs_epfile_io.isra.17+0x444/0x590 [usb_f_fs]
[  100.868424]  ? _raw_spin_unlock_irqrestore+0x27/0x40
[  100.868457]  ? kiocb_set_cancel_fn+0x57/0x60
[  100.868477]  ? ffs_ep0_poll+0xc0/0xc0 [usb_f_fs]
[  100.868512]  ffs_epfile_read_iter+0xfe/0x157 [usb_f_fs]
[  100.868551]  ? security_file_permission+0x9c/0xd0
[  100.868587]  ? rw_verify_area+0xac/0x120
[  100.868633]  aio_read+0x9d/0x100
[  100.868692]  ? __fget+0xa2/0xd0
[  100.868727]  ? __might_sleep+0x68/0x70
[  100.868763]  SyS_io_submit+0x471/0x680
[  100.868878]  do_int80_syscall_32+0x4e/0xd0
[  100.868921]  entry_INT80_32+0x2a/0x2a
[  100.868932] EIP: 0xb7fbb676
[  100.868941] EFLAGS: 00000292 CPU: 1
[  100.868951] EAX: ffffffda EBX: b7aa2000 ECX: 00000002 EDX: b7af8368
[  100.868961] ESI: b7fbb660 EDI: b7aab000 EBP: bfb6c658 ESP: bfb6c638
[  100.868973]  DS: 007b ES: 007b FS: 0000 GS: 0033 SS: 007b

Signed-off-by: Vincent Pelletier <plr.vincent@gmail.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipmi: Stop timers before cleaning up the module

commit 4f7f5551a760eb0124267be65763008169db7087 upstream.

System may crash after unloading ipmi_si.ko module
because a timer may remain and fire after the module cleaned up resources.

cleanup_one_si() contains the following processing.

        /*
         * Make sure that interrupts, the timer and the thread are
         * stopped and will not run again.
         */
        if (to_clean->irq_cleanup)
                to_clean->irq_cleanup(to_clean);
        wait_for_timer_and_thread(to_clean);

        /*
         * Timeouts are stopped, now make sure the interrupts are off
         * in the BMC.  Note that timers and CPU interrupts are off,
         * so no need for locks.
         */
        while (to_clean->curr_msg || (to_clean->si_state != SI_NORMAL)) {
                poll(to_clean);
                schedule_timeout_uninterruptible(1);
        }

si_state changes as following in the while loop calling poll(to_clean).

  SI_GETTING_MESSAGES
    => SI_CHECKING_ENABLES
     => SI_SETTING_ENABLES
      => SI_GETTING_EVENTS
       => SI_NORMAL

As written in the code comments above,
timers are expected to stop before the polling loop and not to run again.
But the timer is set again in the following process
when si_state becomes SI_SETTING_ENABLES.

  => poll
     => smi_event_handler
       => handle_transaction_done
          // smi_info->si_state == SI_SETTING_ENABLES
         => start_getting_events
           => start_new_msg
            => smi_mod_timer
              => mod_timer

As a result, before the timer set in start_new_msg() expires,
the polling loop may see si_state becoming SI_NORMAL
and the module clean-up finishes.

For example, hard LOCKUP and panic occurred as following.
smi_timeout was called after smi_event_handler,
kcs_event and hangs at port_inb()
trying to access I/O port after release.

    [exception RIP: port_inb+19]
    RIP: ffffffffc0473053  RSP: ffff88069fdc3d80  RFLAGS: 00000006
    RAX: ffff8806800f8e00  RBX: ffff880682bd9400  RCX: 0000000000000000
    RDX: 0000000000000ca3  RSI: 0000000000000ca3  RDI: ffff8806800f8e40
    RBP: ffff88069fdc3d80   R8: ffffffff81d86dfc   R9: ffffffff81e36426
    R10: 00000000000509f0  R11: 0000000000100000  R12: 0000000000]:000000
    R13: 0000000000000000  R14: 0000000000000246  R15: ffff8806800f8e00
    ORIG_RAX: ffffffffffffffff  CS: 0010  SS: 0000
 --- <NMI exception stack> ---

To fix the problem I defined a flag, timer_can_start,
as member of struct smi_info.
The flag is enabled immediately after initializing the timer
and disabled immediately before waiting for timer deletion.

Fixes: 0cfec916e86d ("ipmi: Start the timer and thread on internal msgs")
Signed-off-by: Yamazaki Masamitsu <m-yamazaki@ah.jp.nec.com>
[Some fairly major changes went into the IPMI driver in 4.15, so this
 required a backport as the code had changed and moved to a different
 file.]
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sctp: use right member as the param of list_for_each_entry

[ Upstream commit a8dd397903a6e57157f6265911f7d35681364427 ]

Commit d04adf1b3551 ("sctp: reset owner sk for data chunks on out queues
when migrating a sock") made a mistake that using 'list' as the param of
list_for_each_entry to traverse the retransmit, sacked and abandoned
queues, while chunks are using 'transmitted_list' to link into these
queues.

It could cause NULL dereference panic if there are chunks in any of these
queues when peeling off one asoc.

So use the chunk member 'transmitted_list' instead in this patch.

Fixes: d04adf1b3551 ("sctp: reset owner sk for data chunks on out queues when migrating a sock")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cls_bpf: don't decrement net's refcount when offload fails

[ Upstream commit 25415cec502a1232b19fffc85465882b19a90415 ]

When cls_bpf offload was added it seemed like a good idea to
call cls_bpf_delete_prog() instead of extending the error
handling path, since the software state is fully initialized
at that point.  This handling of errors without jumping to
the end of the function is error prone, as proven by later
commit missing that extra call to __cls_bpf_delete_prog().

__cls_bpf_delete_prog() is now expected to be invoked with
a reference on exts->net or the field zeroed out.  The call
on the offload's error patch does not fullfil this requirement,
leading to each error stealing a reference on net namespace.

Create a function undoing what cls_bpf_set_parms() did and
use it from __cls_bpf_delete_prog() and the error path.

Fixes: aae2c35ec892 ("cls_bpf: use tcf_exts_get_net() before call_rcu()")
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: openvswitch: datapath: fix data type in queue_gso_packets

[ Upstream commit 2734166e89639c973c6e125ac8bcfc2d9db72b70 ]

gso_type is being used in binary AND operations together with SKB_GSO_UDP.
The issue is that variable gso_type is of type unsigned short and
SKB_GSO_UDP expands to more than 16 bits:

SKB_GSO_UDP = 1 << 16

this makes any binary AND operation between gso_type and SKB_GSO_UDP to
be always zero, hence making some code unreachable and likely causing
undesired behavior.

Fix this by changing the data type of variable gso_type to unsigned int.

Addresses-Coverity-ID: 1462223
Fixes: 0c19f846d582 ("net: accept UFO datagrams from tuntap and packet")
Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: accept UFO datagrams from tuntap and packet

[ Upstream commit 0c19f846d582af919db66a5914a0189f9f92c936 ]

Tuntap and similar devices can inject GSO packets. Accept type
VIRTIO_NET_HDR_GSO_UDP, even though not generating UFO natively.

Processes are expected to use feature negotiation such as TUNSETOFFLOAD
to detect supported offload types and refrain from injecting other
packets. This process breaks down with live migration: guest kernels
do not renegotiate flags, so destination hosts need to expose all
features that the source host does.

Partially revert the UFO removal from 182e0b6b5846~1..d9d30adf5677.
This patch introduces nearly(*) no new code to simplify verification.
It brings back verbatim tuntap UFO negotiation, VIRTIO_NET_HDR_GSO_UDP
insertion and software UFO segmentation.

It does not reinstate protocol stack support, hardware offload
(NETIF_F_UFO), SKB_GSO_UDP tunneling in SKB_GSO_SOFTWARE or reception
of VIRTIO_NET_HDR_GSO_UDP packets in tuntap.

To support SKB_GSO_UDP reappearing in the stack, also reinstate
logic in act_csum and openvswitch. Achieve equivalence with v4.13 HEAD
by squashing in commit 939912216fa8 ("net: skb_needs_check() removes
CHECKSUM_UNNECESSARY check for tx.") and reverting commit 8d63bee643f1
("net: avoid skb_warn_bad_offload false positives on UFO").

(*) To avoid having to bring back skb_shinfo(skb)->ip6_frag_id,
ipv6_proxy_select_ident is changed to return a __be32 and this is
assigned directly to the frag_hdr. Also, SKB_GSO_UDP is inserted
at the end of the enum to minimize code churn.

Tested
  Booted a v4.13 guest kernel with QEMU. On a host kernel before this
  patch `ethtool -k eth0` shows UFO disabled. After the patch, it is
  enabled, same as on a v4.13 host kernel.

  A UFO packet sent from the guest appears on the tap device:
    host:
      nc -l -p -u 8000 &
      tcpdump -n -i tap0

    guest:
      dd if=/dev/zero of=payload.txt bs=1 count=2000
      nc -u 192.16.1.1 8000 < payload.txt

  Direct tap to tap transmission of VIRTIO_NET_HDR_GSO_UDP succeeds,
  packets arriving fragmented:

    ./with_tap_pair.sh ./tap_send_ufo tap0 tap1
    (from https://github.com/wdebruij/kerneltools/tree/master/tests)

Changes
  v1 -> v2
    - simplified set_offload change (review comment)
    - documented test procedure

Link: http://lkml.kernel.org/r/<CAF=yD-LuUeDuL9YWPJD9ykOZ0QCjNeznPDr6whqZ9NGMNF12Mw@mail.gmail.com>
Fixes: fb652fdfe837 ("macvlan/macvtap: Remove NETIF_F_UFO advertisement.")
Reported-by: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tun: fix rcu_read_lock imbalance in tun_build_skb

[ Upstream commit 654d573845f35017dc397840fa03610fef3d08b0 ]

rcu_read_lock in tun_build_skb is used to rcu_dereference tun->xdp_prog
safely, rcu_read_unlock should be done in every return path.

Now I could see one place missing it, where it returns NULL in switch-case
XDP_REDIRECT,  another palce using rcu_read_lock wrongly, where it returns
NULL in if (xdp_xmit) chunk.

So fix both in this patch.

Fixes: 761876c857cb ("tap: XDP support")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: ipv6: Fixup device for anycast routes during copy

[ Upstream commit 98d11291d189cb5adf49694d0ad1b971c0212697 ]

Florian reported a breakage with anycast routes due to commit
4832c30d5458 ("net: ipv6: put host and anycast routes on device with
address"). Prior to this commit anycast routes were added against the
loopback device causing repetitive route entries with no insight into
why they existed. e.g.:
  $ ip -6 ro ls  table local type anycast
  anycast 2001:db8:1:: dev lo proto kernel metric 0 pref medium
  anycast 2001:db8:2:: dev lo proto kernel metric 0 pref medium
  anycast fe80:: dev lo proto kernel metric 0 pref medium
  anycast fe80:: dev lo proto kernel metric 0 pref medium

The point of commit 4832c30d5458 is to add the routes using the device
with the address which is causing the route to be added. e.g.,:
  $ ip -6 ro ls  table local type anycast
  anycast 2001:db8:1:: dev eth1 proto kernel metric 0 pref medium
  anycast 2001:db8:2:: dev eth2 proto kernel metric 0 pref medium
  anycast fe80:: dev eth2 proto kernel metric 0 pref medium
  anycast fe80:: dev eth1 proto kernel metric 0 pref medium

For traffic to work as it did before, the dst device needs to be switched
to the loopback when the copy is created similar to local routes.

Fixes: 4832c30d5458 ("net: ipv6: put host and anycast routes on device with address")
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tun: free skb in early errors

[ Upstream commit c33ee15b3820a03cf8229ba9415084197b827f8c ]

tun_recvmsg() supports accepting skb by msg_control after
commit ac77cfd4258f ("tun: support receiving skb through msg_control"),
the skb if presented should be freed no matter how far it can go
along, otherwise it would be leaked.

This patch fixes several missed cases.

Signed-off-by: Wei Xu <wexu@redhat.com>
Reported-by: Matthew Rosato <mjrosato@linux.vnet.ibm.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tcp: when scheduling TLP, time of RTO should account for current ACK

[ Upstream commit ed66dfaf236c04d414de1d218441296e57fb2bd2 ]

Fix the TLP scheduling logic so that when scheduling a TLP probe, we
ensure that the estimated time at which an RTO would fire accounts for
the fact that ACKs indicating forward progress should push back RTO
times.

After the following fix:

df92c8394e6e ("tcp: fix xmit timer to only be reset if data ACKed/SACKed")

we had an unintentional behavior change in the following kind of
scenario: suppose the RTT variance has been very low recently. Then
suppose we send out a flight of N packets and our RTT is 100ms:

t=0: send a flight of N packets
t=100ms: receive an ACK for N-1 packets

The response before df92c8394e6e that was:
  -> schedule a TLP for now + RTO_interval

The response after df92c8394e6e is:
  -> schedule a TLP for t=0 + RTO_interval

Since RTO_interval = srtt + RTT_variance, this means that we have
scheduled a TLP timer at a point in the future that only accounts for
RTT_variance. If the RTT_variance term is small, this means that the
timer fires soon.

Before df92c8394e6e this would not happen, because in that code, when
we receive an ACK for a prefix of flight, we did:

    1) Near the top of tcp_ack(), switch from TLP timer to RTO
       at write_queue_head->paket_tx_time + RTO_interval:
            if (icsk->icsk_pending == ICSK_TIME_LOSS_PROBE)
                   tcp_rearm_rto(sk);

    2) In tcp_clean_rtx_queue(), update the RTO to now + RTO_interval:
            if (flag & FLAG_ACKED) {
                   tcp_rearm_rto(sk);

    3) In tcp_ack() after tcp_fastretrans_alert() switch from RTO
       to TLP at now + RTO_interval:
            if (icsk->icsk_pending == ICSK_TIME_RETRANS)
                   tcp_schedule_loss_probe(sk);

In df92c8394e6e we removed that 3-phase dance, and instead directly
set the TLP timer once: we set the TLP timer in cases like this to
write_queue_head->packet_tx_time + RTO_interval. So if the RTT
variance is small, then this means that this is setting the TLP timer
to fire quite soon. This means if the ACK for the tail of the flight
takes longer than an RTT to arrive (often due to delayed ACKs), then
the TLP timer fires too quickly.

Fixes: df92c8394e6e ("tcp: fix xmit timer to only be reset if data ACKed/SACKed")
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tap: free skb if flags error

[ Upstream commit 61d78537843e676e7f56ac6db333db0c0529b892 ]

tap_recvmsg() supports accepting skb by msg_control after
commit 3b4ba04acca8 ("tap: support receiving skb from msg_control"),
the skb if presented should be freed within the function, otherwise
it would be leaked.

Signed-off-by: Wei Xu <wexu@redhat.com>
Reported-by: Matthew Rosato <mjrosato@linux.vnet.ibm.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: sched: cbq: create block for q->link.block

[ Upstream commit d51aae68b142f48232257e96ce317db25445418d ]

q->link.block is not initialized, that leads to EINVAL when one tries to
add filter there. So initialize it properly.

This can be reproduced by:
$ tc qdisc add dev eth0 root handle 1: cbq avpkt 1000 rate 1000Mbit bandwidth 1000Mbit
$ tc filter add dev eth0 parent 1: protocol ip prio 100 u32 match ip protocol 0 0x00 flowid 1:1

Reported-by: Jaroslav Aster <jaster@redhat.com>
Reported-by: Ivan Vecera <ivecera@redhat.com>
Fixes: 6529eaba33f0 ("net: sched: introduce tcf block infractructure")
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Acked-by: Eelco Chaudron <echaudro@redhat.com>
Reviewed-by: Ivan Vecera <ivecera@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tcp: use current time in tcp_rcv_space_adjust()

[ Upstream commit 8632385022f2b05a6ca0b9e0f95575865de0e2ce ]

When I switched rcv_rtt_est to high resolution timestamps, I forgot
that tp->tcp_mstamp needed to be refreshed in tcp_rcv_space_adjust()

Using an old timestamp leads to autotuning lags.

Fixes: 645f4c6f2ebd ("tcp: switch rcv_rtt_est and rcvq_space to high resolution timestamps")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Wei Wang <weiwan@google.com>
Cc: Neal Cardwell <ncardwell@google.com>
Cc: Yuchung Cheng <ycheng@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tipc: call tipc_rcv() only if bearer is up in tipc_udp_recv()

[ Upstream commit c7799c067c2ae33e348508c8afec354f3257ff25 ]

Remove the second tipc_rcv() call in tipc_udp_recv(). We have just
checked that the bearer is not up, and calling tipc_rcv() with a bearer
that is not up leads to a TIPC div-by-zero crash in
tipc_node_calculate_timer(). The crash is rare in practice, but can
happen like this:

  We're enabling a bearer, but it's not yet up and fully initialized.
  At the same time we receive a discovery packet, and in tipc_udp_recv()
  we end up calling tipc_rcv() with the not-yet-initialized bearer,
  causing later the div-by-zero crash in tipc_node_calculate_timer().

Jon Maloy explains the impact of removing the second tipc_rcv() call:
  "link setup in the worst case will be delayed until the next arriving
   discovery messages, 1 sec later, and this is an acceptable delay."

As the tipc_rcv() call is removed, just leave the function via the
rcu_out label, so that we will kfree_skb().

[   12.590450] Own node address <1.1.1>, network identity 1
[   12.668088] divide error: 0000 [#1] SMP
[   12.676952] CPU: 2 PID: 0 Comm: swapper/2 Not tainted 4.14.2-dirty #1
[   12.679225] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-2.fc27 04/01/2014
[   12.682095] task: ffff8c2a761edb80 task.stack: ffffa41cc0cac000
[   12.684087] RIP: 0010:tipc_node_calculate_timer.isra.12+0x45/0x60 [tipc]
[   12.686486] RSP: 0018:ffff8c2a7fc838a0 EFLAGS: 00010246
[   12.688451] RAX: 0000000000000000 RBX: ffff8c2a5b382600 RCX: 0000000000000000
[   12.691197] RDX: 0000000000000000 RSI: ffff8c2a5b382600 RDI: ffff8c2a5b382600
[   12.693945] RBP: ffff8c2a7fc838b0 R08: 0000000000000001 R09: 0000000000000001
[   12.696632] R10: 0000000000000000 R11: 0000000000000000 R12: ffff8c2a5d8949d8
[   12.699491] R13: ffffffff95ede400 R14: 0000000000000000 R15: ffff8c2a5d894800
[   12.702338] FS:  0000000000000000(0000) GS:ffff8c2a7fc80000(0000) knlGS:0000000000000000
[   12.705099] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   12.706776] CR2: 0000000001bb9440 CR3: 00000000bd009001 CR4: 00000000003606e0
[   12.708847] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[   12.711016] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[   12.712627] Call Trace:
[   12.713390]  <IRQ>
[   12.714011]  tipc_node_check_dest+0x2e8/0x350 [tipc]
[   12.715286]  tipc_disc_rcv+0x14d/0x1d0 [tipc]
[   12.716370]  tipc_rcv+0x8b0/0xd40 [tipc]
[   12.717396]  ? minmax_running_min+0x2f/0x60
[   12.718248]  ? dst_alloc+0x4c/0xa0
[   12.718964]  ? tcp_ack+0xaf1/0x10b0
[   12.719658]  ? tipc_udp_is_known_peer+0xa0/0xa0 [tipc]
[   12.720634]  tipc_udp_recv+0x71/0x1d0 [tipc]
[   12.721459]  ? dst_alloc+0x4c/0xa0
[   12.722130]  udp_queue_rcv_skb+0x264/0x490
[   12.722924]  __udp4_lib_rcv+0x21e/0x990
[   12.723670]  ? ip_route_input_rcu+0x2dd/0xbf0
[   12.724442]  ? tcp_v4_rcv+0x958/0xa40
[   12.725039]  udp_rcv+0x1a/0x20
[   12.725587]  ip_local_deliver_finish+0x97/0x1d0
[   12.726323]  ip_local_deliver+0xaf/0xc0
[   12.726959]  ? ip_route_input_noref+0x19/0x20
[   12.727689]  ip_rcv_finish+0xdd/0x3b0
[   12.728307]  ip_rcv+0x2ac/0x360
[   12.728839]  __netif_receive_skb_core+0x6fb/0xa90
[   12.729580]  ? udp4_gro_receive+0x1a7/0x2c0
[   12.730274]  __netif_receive_skb+0x1d/0x60
[   12.730953]  ? __netif_receive_skb+0x1d/0x60
[   12.731637]  netif_receive_skb_internal+0x37/0xd0
[   12.732371]  napi_gro_receive+0xc7/0xf0
[   12.732920]  receive_buf+0x3c3/0xd40
[   12.733441]  virtnet_poll+0xb1/0x250
[   12.733944]  net_rx_action+0x23e/0x370
[   12.734476]  __do_softirq+0xc5/0x2f8
[   12.734922]  irq_exit+0xfa/0x100
[   12.735315]  do_IRQ+0x4f/0xd0
[   12.735680]  common_interrupt+0xa2/0xa2
[   12.736126]  </IRQ>
[   12.736416] RIP: 0010:native_safe_halt+0x6/0x10
[   12.736925] RSP: 0018:ffffa41cc0cafe90 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff4d
[   12.737756] RAX: 0000000000000000 RBX: ffff8c2a761edb80 RCX: 0000000000000000
[   12.738504] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
[   12.739258] RBP: ffffa41cc0cafe90 R08: 0000014b5b9795e5 R09: ffffa41cc12c7e88
[   12.740118] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000002
[   12.740964] R13: ffff8c2a761edb80 R14: 0000000000000000 R15: 0000000000000000
[   12.741831]  default_idle+0x2a/0x100
[   12.742323]  arch_cpu_idle+0xf/0x20
[   12.742796]  default_idle_call+0x28/0x40
[   12.743312]  do_idle+0x179/0x1f0
[   12.743761]  cpu_startup_entry+0x1d/0x20
[   12.744291]  start_secondary+0x112/0x120
[   12.744816]  secondary_startup_64+0xa5/0xa5
[   12.745367] Code: b9 f4 01 00 00 48 89 c2 48 c1 ea 02 48 3d d3 07 00
00 48 0f 47 d1 49 8b 0c 24 48 39 d1 76 07 49 89 14 24 48 89 d1 31 d2 48
89 df <48> f7 f1 89 c6 e8 81 6e ff ff 5b 41 5c 5d c3 66 90 66 2e 0f 1f
[   12.747527] RIP: tipc_node_calculate_timer.isra.12+0x45/0x60 [tipc] RSP: ffff8c2a7fc838a0
[   12.748555] ---[ end trace 1399ab83390650fd ]---
[   12.749296] Kernel panic - not syncing: Fatal exception in interrupt
[   12.750123] Kernel Offset: 0x13200000 from 0xffffffff82000000
(relocation range: 0xffffffff80000000-0xffffffffbfffffff)
[   12.751215] Rebooting in 60 seconds..

Fixes: c9b64d492b1f ("tipc: add replicast peer discovery")
Signed-off-by: Tommi Rantala <tommi.t.rantala@nokia.com>
Cc: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tcp: use IPCB instead of TCP_SKB_CB in inet_exact_dif_match()

[ Usptream commit b4d1605a8ea608fd7dc45b926a05d75d340bde4b ]

After this fix : ("tcp: add tcp_v4_fill_cb()/tcp_v4_restore_cb()"),
socket lookups happen while skb->cb[] has not been mangled yet by TCP.

Fixes: a04a480d4392 ("net: Require exact match for TCP socket lookups if dif is l3mdev")
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

s390/qeth: fix GSO throughput regression

[ Upstream commit 6d69b1f1eb7a2edf8a3547f361c61f2538e054bb ]

Using GSO with small MTUs currently results in a substantial throughput
regression - which is caused by how qeth needs to map non-linear skbs
into its IO buffer elements:
compared to a linear skb, each GSO-segmented skb effectively consumes
twice as many buffer elements (ie two instead of one) due to the
additional header-only part. This causes the Output Queue to be
congested with low-utilized IO buffers.

Fix this as follows:
If the MSS is low enough so that a non-SG GSO segmentation produces
order-0 skbs (currently ~3500 byte), opt out from NETIF_F_SG. This is
where we anticipate the biggest savings, since an SG-enabled
GSO segmentation produces skbs that always consume at least two
buffer elements.

Larger MSS values continue to get a SG-enabled GSO segmentation, since
1) the relative overhead of the additional header-only buffer element
becomes less noticeable, and
2) the linearization overhead increases.

With the throughput regression fixed, re-enable NETIF_F_SG by default to
reap the significant CPU savings of GSO.

Fixes: 5722963a8e83 ("qeth: do not turn on SG per default")
Reported-by: Nils Hoppmann <niho@de.ibm.com>
Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

s390/qeth: fix thinko in IPv4 multicast address tracking

[ Upsteam commit bc3ab70584696cb798b9e1e0ac8e6ced5fd4c3b8 ]

Commit 5f78e29ceebf ("qeth: optimize IP handling in rx_mode callback")
reworked how secondary addresses are managed for qeth devices.
Instead of dropping & subsequently re-adding all addresses on every
ndo_set_rx_mode() call, qeth now keeps track of the addresses that are
currently registered with the HW.
On a ndo_set_rx_mode(), we thus only need to do (de-)registration
requests for the addresses that have actually changed.

On L3 devices, the lookup for IPv4 Multicast addresses checks the wrong
hashtable - and thus never finds a match. As a result, we first delete
*all* such addresses, and then re-add them again. So each set_rx_mode()
causes a short period where the IPv4 Multicast addresses are not
registered, and the card stops forwarding inbound traffic for them.

Fix this by setting the ->is_multicast flag on the lookup object, thus
enabling qeth_l3_ip_from_hash() to search the correct hashtable and
find a match there.

Fixes: 5f78e29ceebf ("qeth: optimize IP handling in rx_mode callback")
Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

s390/qeth: build max size GSO skbs on L2 devices

[ Upstream commit 0cbff6d4546613330a1c5f139f5c368e4ce33ca1 ]

The current GSO skb size limit was copy&pasted over from the L3 path,
where it is needed due to a TSO limitation.
As L2 devices don't offer TSO support (and thus all GSO skbs are
segmented before they reach the driver), there's no reason to restrict
the stack in how large it may build the GSO skbs.

Fixes: d52aec97e5bc ("qeth: enable scatter/gather in layer 2 mode")
Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tcp/dccp: block bh before arming time_wait timer

[ Upstream commit cfac7f836a715b91f08c851df915d401a4d52783 ]

Maciej Żenczykowski reported some panics in tcp_twsk_destructor()
that might be caused by the following bug.

timewait timer is pinned to the cpu, because we want to transition
timwewait refcount from 0 to 4 in one go, once everything has been
initialized.

At the time commit ed2e92394589 ("tcp/dccp: fix timewait races in timer
handling") was merged, TCP was always running from BH habdler.

After commit 5413d1babe8f ("net: do not block BH while processing
socket backlog") we definitely can run tcp_time_wait() from process
context.

We need to block BH in the critical section so that the pinned timer
has still its purpose.

This bug is more likely to happen under stress and when very small RTO
are used in datacenter flows.

Fixes: 5413d1babe8f ("net: do not block BH while processing socket backlog")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Maciej Żenczykowski <maze@google.com>
Acked-by: Maciej Żenczykowski <maze@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

stmmac: reset last TSO segment size after device open

[ Upstream commit 45ab4b13e46325d00f4acdb365d406e941a15f81 ]

The mss variable tracks the last max segment size sent to the TSO
engine. We do not update the hardware as long as we receive skb:s with
the same value in gso_size.

During a network device down/up cycle (mapped to stmmac_release() and
stmmac_open() callbacks) we issue a reset to the hardware and it
forgets the setting for mss. However we did not zero out our mss
variable so the next transmission of a gso packet happens with an
undefined hardware setting.

This triggers a hang in the TSO engine and eventuelly the netdev
watchdog will bark.

Fixes: f748be531d70 ("stmmac: support new GMAC4")
Signed-off-by: Lars Persson <larper@axis.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: remove hlist_nulls_add_tail_rcu()

[ Upstream commit d7efc6c11b277d9d80b99b1334a78bfe7d7edf10 ]

Alexander Potapenko reported use of uninitialized memory [1]

This happens when inserting a request socket into TCP ehash,
in __sk_nulls_add_node_rcu(), since sk_reuseport is not initialized.

Bug was added by commit d894ba18d4e4 ("soreuseport: fix ordering for
mixed v4/v6 sockets")

Note that d296ba60d8e2 ("soreuseport: Resolve merge conflict for v4/v6
ordering fix") missed the opportunity to get rid of
hlist_nulls_add_tail_rcu() :

Both UDP sockets and TCP/DCCP listeners no longer use
__sk_nulls_add_node_rcu() for their hash insertion.

Since all other sockets have unique 4-tuple, the reuseport status
has no special meaning, so we can always use hlist_nulls_add_head_rcu()
for them and save few cycles/instructions.

[1]

==================================================================
BUG: KMSAN: use of uninitialized memory in inet_ehash_insert+0xd40/0x1050
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.13.0+ #3288
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
Call Trace:
 <IRQ>
 __dump_stack lib/dump_stack.c:16
 dump_stack+0x185/0x1d0 lib/dump_stack.c:52
 kmsan_report+0x13f/0x1c0 mm/kmsan/kmsan.c:1016
 __msan_warning_32+0x69/0xb0 mm/kmsan/kmsan_instr.c:766
 __sk_nulls_add_node_rcu ./include/net/sock.h:684
 inet_ehash_insert+0xd40/0x1050 net/ipv4/inet_hashtables.c:413
 reqsk_queue_hash_req net/ipv4/inet_connection_sock.c:754
 inet_csk_reqsk_queue_hash_add+0x1cc/0x300 net/ipv4/inet_connection_sock.c:765
 tcp_conn_request+0x31e7/0x36f0 net/ipv4/tcp_input.c:6414
 tcp_v4_conn_request+0x16d/0x220 net/ipv4/tcp_ipv4.c:1314
 tcp_rcv_state_process+0x42a/0x7210 net/ipv4/tcp_input.c:5917
 tcp_v4_do_rcv+0xa6a/0xcd0 net/ipv4/tcp_ipv4.c:1483
 tcp_v4_rcv+0x3de0/0x4ab0 net/ipv4/tcp_ipv4.c:1763
 ip_local_deliver_finish+0x6bb/0xcb0 net/ipv4/ip_input.c:216
 NF_HOOK ./include/linux/netfilter.h:248
 ip_local_deliver+0x3fa/0x480 net/ipv4/ip_input.c:257
 dst_input ./include/net/dst.h:477
 ip_rcv_finish+0x6fb/0x1540 net/ipv4/ip_input.c:397
 NF_HOOK ./include/linux/netfilter.h:248
 ip_rcv+0x10f6/0x15c0 net/ipv4/ip_input.c:488
 __netif_receive_skb_core+0x36f6/0x3f60 net/core/dev.c:4298
 __netif_receive_skb net/core/dev.c:4336
 netif_receive_skb_internal+0x63c/0x19c0 net/core/dev.c:4497
 napi_skb_finish net/core/dev.c:4858
 napi_gro_receive+0x629/0xa50 net/core/dev.c:4889
 e1000_receive_skb drivers/net/ethernet/intel/e1000/e1000_main.c:4018
 e1000_clean_rx_irq+0x1492/0x1d30
drivers/net/ethernet/intel/e1000/e1000_main.c:4474
 e1000_clean+0x43aa/0x5970 drivers/net/ethernet/intel/e1000/e1000_main.c:3819
 napi_poll net/core/dev.c:5500
 net_rx_action+0x73c/0x1820 net/core/dev.c:5566
 __do_softirq+0x4b4/0x8dd kernel/softirq.c:284
 invoke_softirq kernel/softirq.c:364
 irq_exit+0x203/0x240 kernel/softirq.c:405
 exiting_irq+0xe/0x10 ./arch/x86/include/asm/apic.h:638
 do_IRQ+0x15e/0x1a0 arch/x86/kernel/irq.c:263
 common_interrupt+0x86/0x86

Fixes: d894ba18d4e4 ("soreuseport: fix ordering for mixed v4/v6 sockets")
Fixes: d296ba60d8e2 ("soreuseport: Resolve merge conflict for v4/v6 ordering fix")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Alexander Potapenko <glider@google.com>
Acked-by: Craig Gallek <kraig@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usbnet: fix alignment for frames with no ethernet header

[ Upstream commit a4abd7a80addb4a9547f7dfc7812566b60ec505c ]

The qmi_wwan minidriver support a 'raw-ip' mode where frames are
received without any ethernet header. This causes alignment issues
because the skbs allocated by usbnet are "IP aligned".

Fix by allowing minidrivers to disable the additional alignment
offset. This is implemented using a per-device flag, since the same
minidriver also supports 'ethernet' mode.

Fixes: 32f7adf633b9 ("net: qmi_wwan: support "raw IP" mode")
Reported-and-tested-by: Jay Foster <jay@systech.com>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>