GitHub/mt8127/android_kernel_alcatel_ttab.git
18 years agoMerge branch 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband
Linus Torvalds [Tue, 21 Mar 2006 17:22:08 +0000 (09:22 -0800)]
Merge branch 'for-linus' of /linux/kernel/git/roland/infiniband

* 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband: (47 commits)
  IB/mthca: Query SRQ srq_limit fixes
  IPoIB: Get rid of useless test of queue length
  IB/mthca: Correct reported SRQ size in MemFree case.
  IB/mad: Fix oopsable race on device removal
  IB/srp: Coverity fix to srp_parse_options()
  IB/mthca: Coverity fix to mthca_init_eq_table()
  IB: Coverity fixes to sysfs.c
  IPoIB: Move ipoib_ib_dev_flush() to ipoib workqueue
  IPoIB: Fix build now that neighbour destructor is in neigh_params
  IB/uverbs: Use correct alt_pkey_index in modify QP
  IB/umad: Add support for large RMPP transfers
  IB/srp: Add SCSI host attributes to show target port
  IB/cm: Check cm_id state before handling a REP
  IB/mthca: Update firmware versions
  IB/mthca: Optimize large messages on Sinai HCAs
  IB/uverbs: Fix query QP return of sq_sig_all
  IB: Fix modify QP checking of "current QP state" attribute
  IPoIB: Fix multicast race between canceling and completing
  IPoIB: Clean up if posting receives fails
  IB/mthca: Use an enum for HCA page size
  ...

18 years agoMerge master.kernel.org:/home/rmk/linux-2.6-arm
Linus Torvalds [Tue, 21 Mar 2006 17:20:47 +0000 (09:20 -0800)]
Merge master.kernel.org:/home/rmk/linux-2.6-arm

* master.kernel.org:/home/rmk/linux-2.6-arm:
  [ARM] Fix cosmetic typo in asm/irq.h
  [ARM] 3367/1: CLCD mode no longer supported on the RealView boards
  [ARM] 3366/1: Allow the 16bpp mode configuration in the CLCD control register

18 years agoMerge branch 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik...
Linus Torvalds [Tue, 21 Mar 2006 17:20:12 +0000 (09:20 -0800)]
Merge branch 'upstream-linus' of /linux/kernel/git/jgarzik/libata-dev

* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev: (112 commits)
  [libata] sata_mv: fix irq port status usage
  [PATCH] libata: move IDENTIFY info printing from ata_dev_read_id() to ata_dev_configure()
  [PATCH] libata: use local *id instead of dev->id in ata_dev_configure()
  [PATCH] libata: check Word 88 validity in ata_id_xfer_mask()
  [PATCH] libata: fix class handling in ata_bus_probe()
  [PATCH] ahci: enable prefetching for PACKET commands
  libata: turn on ATAPI by default
  [PATCH] sata_sil24: lengthen softreset timeout
  [PATCH] sata_sil24: exit early from softreset if SStatus reports no device
  [PATCH] libata: fix missing classes[] initialization in ata_bus_probe()
  [PATCH] libata: kill unused xfer_mode functions
  [PATCH] libata: reimplement ata_set_mode() using xfer_mask helpers
  [PATCH] libata: use xfer_mask helpers in ata_dev_set_mode()
  [PATCH] libata: use ata_id_xfermask() in ata_dev_configure()
  [PATCH] libata: add xfer_mask handling functions
  [PATCH] libata: improve xfer mask constants and update ata_mode_string()
  [PATCH] libata: rename ATA_FLAG_FLUSH_PIO_TASK to ATA_FLAG_FLUSH_PORT_TASK
  [PATCH] libata: kill unused pio_task and packet_task
  [PATCH] libata: convert pio_task and packet_task to port_task
  [PATCH] libata: implement port_task
  ...

18 years agoMerge kernel.org:/pub/scm/linux/kernel/git/mchehab/v4l-dvb.git with fixups
Linus Torvalds [Tue, 21 Mar 2006 17:01:08 +0000 (09:01 -0800)]
Merge /linux/kernel/git/mchehab/v4l-dvb.git with fixups

This merges the DVB tree, but fixes up the history that had gotten
screwed up by a broken commit.

The history is fixed up by re-doing the commit properly (taking the
resolve from the final result of the original), and then cherry-picking
the commits that followed the broken merge.

* dvb: (190 commits)
  V4L/DVB (3545): Fixed no_overlay option and quirks on saa7134 driver
  V4L/DVB (3543): Fix Makefile to adapt to bt8xx/ conversion
  V4L/DVB (3538): Bt8xx documentation update
  V4L/DVB (3537a): Whitespace cleanup
  V4L/DVB (3533): Add WSS (wide screen signalling) module parameters
  V4L/DVB (3532): Moved duplicated code of ALPS BSRU6 tuner to a standalone file.
  V4L/DVB (3530): Kconfig: remove VIDEO_AUDIO_DECODER
  V4L/DVB (3529): Kconfig: add menu items for cs53l32a and wm8775 A/D converters
  V4L/DVB (3528): Kconfig: fix ATSC frontend menu item names by manufacturer
  V4L/DVB (3527): VIDEO_CPIA2 must depend on USB
  V4L/DVB (3525): Kconfig: remove VIDEO_DECODER
  V4L/DVB (3524): Kconfig: add menu items for saa7115 and saa7127
  V4L/DVB (3494): Kconfig: select VIDEO_MSP3400 to build msp3400.ko
  V4L/DVB (3522): Fixed a trouble with other PAL standards
  V4L/DVB (3521): Avoid warnings at video-buf.c
  V4L/DVB (3514): SAA7113 doesn't have auto std chroma detection mode
  V4L/DVB (3513): Remove saa711x driver
  V4L/DVB (3509): Make a needlessly global function static.
  V4L/DVB (3506): Cinergy T2 dmx cleanup on disconnect
  V4L/DVB (3504): Medion 7134: Autodetect second bridge chip
  ...

Signed-off-by: Linus Torvalds <torvalds@osdl.org>
18 years agoV4L/DVB (3545): Fixed no_overlay option and quirks on saa7134 driver
Mauro Carvalho Chehab [Fri, 17 Mar 2006 23:54:32 +0000 (20:54 -0300)]
V4L/DVB (3545): Fixed no_overlay option and quirks on saa7134 driver

Some chipsets have several problems when pci to pci transfers are activated
on overlay mode. the option no_overlay allows disabling such feature of
the driver, in favor of keeping the system stable.
The default is to use pcipci_fail flag defined on drivers/pci/quirks.c.
It also allows the user to override it by forcing disable overlay or forcing
enable. Forcing enable may generate PCI transfer corruption, including disk
mass corruption, so should be used with care.
Added a text description to this option and make messages looks the same at
both bttv and saa7134 drivers.

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
18 years agoV4L/DVB (3543): Fix Makefile to adapt to bt8xx/ conversion
Manu Abraham [Fri, 17 Mar 2006 21:21:17 +0000 (18:21 -0300)]
V4L/DVB (3543): Fix Makefile to adapt to bt8xx/ conversion

Signed-off-by: Manu Abraham <manu@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
18 years agoV4L/DVB (3538): Bt8xx documentation update
Uwe Bugla [Thu, 16 Mar 2006 23:37:05 +0000 (20:37 -0300)]
V4L/DVB (3538): Bt8xx documentation update

Signed-off-by: Uwe Bugla <uwe.bugla@gmx.de>
Signed-off-by: Manu Abraham <manu@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
18 years agoV4L/DVB (3537a): Whitespace cleanup
Mauro Carvalho Chehab [Fri, 17 Mar 2006 13:37:02 +0000 (10:37 -0300)]
V4L/DVB (3537a): Whitespace cleanup

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
18 years agoV4L/DVB (3533): Add WSS (wide screen signalling) module parameters
Oliver Endriss [Fri, 17 Mar 2006 08:29:15 +0000 (05:29 -0300)]
V4L/DVB (3533): Add WSS (wide screen signalling) module parameters

Add wss_cfg_4_3 and wss_cfg_16_9 configuration options.
Firmware 2623 or later required.
Both parameters are bit masks:
- bit 15: disable WSS
- bit 14: send short WSS burst, then turn off WSS
- bit 13..0: WSS bits as specified by the standard
These parameters are useful if you own a broken tv set which
does not handle wss correctly.
Default settings:
- wss_cfg_4_3: 0x4008
- wss_cfg_16_9: 0x0007
These should work with most devices.

Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
18 years agoV4L/DVB (3532): Moved duplicated code of ALPS BSRU6 tuner to a standalone file.
Perceval Anichini [Thu, 16 Mar 2006 14:22:47 +0000 (11:22 -0300)]
V4L/DVB (3532): Moved duplicated code of ALPS BSRU6 tuner to a standalone file.

Moved duplicated code of ALPS BSRU6 tuner to a standalone file.
Modified av7110 and budget drivers to include the new file.

Signed-off-by: Perceval Anichini <perceval.anichini@streamvision.fr>
Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
18 years agoV4L/DVB (3530): Kconfig: remove VIDEO_AUDIO_DECODER
Michael Krufky [Thu, 16 Mar 2006 17:53:23 +0000 (14:53 -0300)]
V4L/DVB (3530): Kconfig: remove VIDEO_AUDIO_DECODER

- removed VIDEO_AUDIO_DECODER Kconfig menu item.
  VIDEO_MSP3400, VIDEO_CS53L32A and VIDEO_WM8775 now
  each have their own menu items.

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
18 years agoV4L/DVB (3529): Kconfig: add menu items for cs53l32a and wm8775 A/D converters
Michael Krufky [Thu, 16 Mar 2006 17:48:38 +0000 (14:48 -0300)]
V4L/DVB (3529): Kconfig: add menu items for cs53l32a and wm8775 A/D converters

- created Kconfig item, VIDEO_CS53L32A, for the cs53l32a module which supports
  the Cirrus Logic CS53L32A Low Voltage Stereo A/D Converter.
- created Kconfig item, VIDEO_WM8775, for the wm8775 module which supports
  the Wolfson Microelectronics WM8775 high performance stereo A/D Converter.

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
18 years agoV4L/DVB (3528): Kconfig: fix ATSC frontend menu item names by manufacturer
Michael Krufky [Thu, 16 Mar 2006 16:18:25 +0000 (13:18 -0300)]
V4L/DVB (3528): Kconfig: fix ATSC frontend menu item names by manufacturer

- Corrected typo for NxtWave NXT200X
- Added "Oren" manufacturer name to menu items for OR51132 and OR51211
- Removed "(pcHDTV HDx000 card)" from Oren frontends menu item names,
  This isn't necessary, as these frontends are selected by the card drivers,
  build configuration (DVB_BT8XX and VIDEO_CX88_DVB).

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
18 years agoV4L/DVB (3527): VIDEO_CPIA2 must depend on USB
Adrian Bunk [Thu, 16 Mar 2006 15:53:53 +0000 (12:53 -0300)]
V4L/DVB (3527): VIDEO_CPIA2 must depend on USB

CONFIG_VIDEO_CPIA2=y, CONFIG_USB=n results in the following compile
<--  snip  -->
...
  LD      .tmp_vmlinux1
drivers/built-in.o: In function `set_alternate':cpia2_usb.c:(.text+0x443aa2): undefined reference to `usb_set_interface'
drivers/built-in.o: In function `cpia2_usb_stream_resume': undefined reference to `usb_alloc_urb'
drivers/built-in.o: In function `cpia2_usb_stream_resume': undefined reference to `usb_submit_urb'
drivers/built-in.o: In function `cpia2_usb_stream_pause': undefined reference to `usb_kill_urb'
drivers/built-in.o: In function `cpia2_usb_stream_pause': undefined reference to `usb_free_urb'
drivers/built-in.o: In function `cpia2_usb_disconnect':cpia2_usb.c:(.text+0x443e14): undefined reference to `usb_driver_release_interface'
drivers/built-in.o: In function `cpia2_usb_transfer_cmd': undefined reference to `usb_control_msg'
drivers/built-in.o: In function `cpia2_usb_transfer_cmd': undefined reference to `usb_control_msg'
drivers/built-in.o: In function `cpia2_usb_complete':cpia2_usb.c:(.text+0x444836): undefined reference to `usb_submit_urb'
drivers/built-in.o: In function `cpia2_usb_cleanup': undefined reference to `usb_deregister'
drivers/built-in.o: In function `cpia2_usb_init': undefined reference to `usb_register_driver'

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
18 years agoV4L/DVB (3525): Kconfig: remove VIDEO_DECODER
Michael Krufky [Thu, 16 Mar 2006 05:59:09 +0000 (02:59 -0300)]
V4L/DVB (3525): Kconfig: remove VIDEO_DECODER

- removed VIDEO_DECODER Kconfig menu item.
  VIDEO_CX25840, VIDEO_SAA711X and VIDEO_SAA7127 now
  each have their own menu items.

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
18 years agoV4L/DVB (3524): Kconfig: add menu items for saa7115 and saa7127
Michael Krufky [Thu, 16 Mar 2006 05:53:14 +0000 (02:53 -0300)]
V4L/DVB (3524): Kconfig: add menu items for saa7115 and saa7127

- created Kconfig menu item, VIDEO_SAA711X, for the saa7115 module,
  which supports SAA7113, SAA7114 and SAA7115 video decoders.

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
18 years agoV4L/DVB (3494): Kconfig: select VIDEO_MSP3400 to build msp3400.ko
Michael Krufky [Tue, 14 Mar 2006 02:44:31 +0000 (23:44 -0300)]
V4L/DVB (3494): Kconfig: select VIDEO_MSP3400 to build msp3400.ko

The msp3400 driver is currently only being built if
the bttv driver is selected. There are new drivers
that will be needing msp3400, so simply including
msp3400 in the Makefile is no longer appropriate.
This patch creates VIDEO_MSP3400, and alters VIDEO_BT848, VIDEO_PVRUSB2
and VIDEO_AUDIO_DECODER each to select VIDEO_MSP3400.

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
18 years agoV4L/DVB (3522): Fixed a trouble with other PAL standards
Mauro Carvalho Chehab [Thu, 16 Mar 2006 21:44:07 +0000 (18:44 -0300)]
V4L/DVB (3522): Fixed a trouble with other PAL standards

V4L2_STD_PAL define is not correct. It specifies only 50Hz PAL standards.
This patch fixes saa7113 color config for other PAL video standards.

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
18 years agoV4L/DVB (3521): Avoid warnings at video-buf.c
Mauro Carvalho Chehab [Wed, 15 Mar 2006 20:52:14 +0000 (17:52 -0300)]
V4L/DVB (3521): Avoid warnings at video-buf.c

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
18 years agoV4L/DVB (3514): SAA7113 doesn't have auto std chroma detection mode
Mauro Carvalho Chehab [Tue, 14 Mar 2006 19:33:33 +0000 (16:33 -0300)]
V4L/DVB (3514): SAA7113 doesn't have auto std chroma detection mode

This patch makes chroma standard selection based at possible values,
according with datasheet.

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
18 years agoV4L/DVB (3513): Remove saa711x driver
Mauro Carvalho Chehab [Mon, 13 Mar 2006 16:31:31 +0000 (13:31 -0300)]
V4L/DVB (3513): Remove saa711x driver

Now, em28xx uses saa7115 instead of saa711x.
saa7115 driver is capable of handling saa 7113, 7114 and 7115.

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
18 years agoV4L/DVB (3509): Make a needlessly global function static.
Adrian Bunk [Wed, 15 Mar 2006 19:17:11 +0000 (16:17 -0300)]
V4L/DVB (3509): Make a needlessly global function static.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
18 years agoV4L/DVB (3506): Cinergy T2 dmx cleanup on disconnect
Markus Rechberger [Wed, 15 Mar 2006 12:31:31 +0000 (09:31 -0300)]
V4L/DVB (3506): Cinergy T2 dmx cleanup on disconnect

Detaching the device didn't clean up several device files in /dev/dvb,
after applying that patch all dvb devices disappeared as expected.

Signed-off-by: Markus Rechberger <mrechberger@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
18 years agoV4L/DVB (3504): Medion 7134: Autodetect second bridge chip
Michael Krufky [Tue, 14 Mar 2006 22:02:12 +0000 (19:02 -0300)]
V4L/DVB (3504): Medion 7134: Autodetect second bridge chip

The device, Medion 7134, has two saa7134 chips on it, but only one of them
is functional in the current saa7134 driver.
This patch adds autodetection for the second, unsupported saa7134 chip,
as SAA7134_BOARD_MD7134_BRIDGE_2, and displays a message to the user
(in dmesg) indicating that the second chip isn't yet functional.
This is useful for users, since two instances of the saa7134 driver
will spawn. This patch will prevent confusion by warning the user that
only one of the chips on the board are functional.
There are other versions of the SAA7134_BOARD_MD7134 with only a single
saa7134 bridge/decoder -- those devices will not be affected by this patch.
Only devices containing the second chip will display the warning.

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
18 years agoV4L/DVB (3503): Whitespace: fix incorrect indentation of curly bracket
Michael Krufky [Tue, 14 Mar 2006 19:18:49 +0000 (16:18 -0300)]
V4L/DVB (3503): Whitespace: fix incorrect indentation of curly bracket

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
18 years agoV4L/DVB (3502): Saa7134: make unsupported secondary decoder message generic
Michael Krufky [Tue, 14 Mar 2006 19:07:42 +0000 (16:07 -0300)]
V4L/DVB (3502): Saa7134: make unsupported secondary decoder message generic

There are already some supported devices that contain two
saa713x chips on-board, where only one of these chips is
currently functional in the driver.
We are already printing a warning message for the second
saa7134 decoder in SAA7134_BOARD_AVERMEDIA_A169_B. This
patch alters that case to make it generic, so that other
cards in the same situation can use it.

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
18 years agoV4L/DVB (3501): Dmxdev: use dvb_ringbuffer
Andreas Oberritter [Tue, 14 Mar 2006 20:31:01 +0000 (17:31 -0300)]
V4L/DVB (3501): Dmxdev: use dvb_ringbuffer

Use dvb_ringbuffer instead of an own buffer implementation in
dmxdev.[ch].

Signed-off-by: Andreas Oberritter <obi@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
18 years agoV4L/DVB (3500): Ringbuffer: don't reset pointers to zero
Andreas Oberritter [Tue, 14 Mar 2006 20:30:09 +0000 (17:30 -0300)]
V4L/DVB (3500): Ringbuffer: don't reset pointers to zero

Oliver Endriss spotted, that resetting read and write pointers on
flush() requires additional locking and breaks the av7110 driver.
Therefore this patch partially reverts the previous patch titled "make
dvb_ringbuffer compatible to dmxdev_buffer".

Signed-off-by: Andreas Oberritter <obi@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
18 years agoV4L/DVB (3499): Fix a bug when more than MAXBOARDS were plugged on em28xx
Mauro Carvalho Chehab [Tue, 14 Mar 2006 20:24:57 +0000 (17:24 -0300)]
V4L/DVB (3499): Fix a bug when more than MAXBOARDS were plugged on em28xx

Coverity reported a bug at checking max number of supported boards by
em28xx init code.

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
18 years agoV4L/DVB (3497): Remove redundant makefile inclusion of tuner.o
Michael Krufky [Tue, 14 Mar 2006 04:25:01 +0000 (01:25 -0300)]
V4L/DVB (3497): Remove redundant makefile inclusion of tuner.o

VIDEO_MXB selects VIDEO_TUNER, so we don't have to include tuner.o
in the Makefile.

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
18 years agoV4L/DVB (3496): Cpia2: move Kconfig build logic into cpia2/Kconfig
Michael Krufky [Tue, 14 Mar 2006 03:52:20 +0000 (00:52 -0300)]
V4L/DVB (3496): Cpia2: move Kconfig build logic into cpia2/Kconfig

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
18 years agoV4L/DVB (3495): Kconfig: select VIDEO_CX25840 to build cx25840 a/v decoder module
Michael Krufky [Tue, 14 Mar 2006 03:35:07 +0000 (00:35 -0300)]
V4L/DVB (3495): Kconfig: select VIDEO_CX25840 to build cx25840 a/v decoder module

The cx25840 module requires external firmware in order to function,
so it must select FW_LOADER, but saa7115 and saa7129 do not require it.
This patch creates VIDEO_CX25840, and alters VIDEO_DECODER to select it.

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
18 years agoV4L/DVB (3488): Snd_cx88_create: don't dereference NULL core
Duncan Sands [Tue, 14 Mar 2006 15:12:39 +0000 (12:12 -0300)]
V4L/DVB (3488): Snd_cx88_create: don't dereference NULL core

If the call to cx88_core_get returns a NULL value, it is dereferenced
by cx88_reset, and perhaps by cx88_core_put.  Spotted by the Coverity
checker.

Signed-off-by: Duncan Sands <baldrick@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
18 years agoV4L/DVB (3485): BUG_ON() Conversion in drivers/video/media
Eric Sesterhenn [Mon, 13 Mar 2006 16:17:11 +0000 (13:17 -0300)]
V4L/DVB (3485): BUG_ON() Conversion in drivers/video/media

Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
18 years agoV4L/DVB (3484): Make dvb_ringbuffer compatible to dmxdev_buffer
Andreas Oberritter [Mon, 13 Mar 2006 16:14:34 +0000 (13:14 -0300)]
V4L/DVB (3484): Make dvb_ringbuffer compatible to dmxdev_buffer

Added variable 'error' to struct dvb_ringbuffer, which is set to zero on
init() and flush(). Also reset read an write pointers to zero on flush()
to get less fragmented data.

Signed-off-by: Andreas Oberritter <obi@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
18 years agoV4L/DVB (3479): Cleanup mangled whitespace
Michael Krufky [Mon, 13 Mar 2006 06:41:44 +0000 (03:41 -0300)]
V4L/DVB (3479): Cleanup mangled whitespace

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
18 years agoV4L/DVB (3449): Cx88 default picture controls values
Marcin Rudowski [Sun, 12 Mar 2006 03:03:47 +0000 (00:03 -0300)]
V4L/DVB (3449): Cx88 default picture controls values

This patch fixes default values for some picture controls:
 - brightness set to 50% by default (now is 0%)
 - hue set to 50% by default (now is 0%)
 - sets saturation to datasheet value
 - volume set to 0dB (now is -32dB)
and some left small fixes:
 - twice offset adding
 - balance didn't follow datasheet (bits[0:5] = attenuation;
   bit[6] = channel to provide attenuation)

Signed-off-by: Marcin Rudowski <mar_rud@poczta.onet.pl>
Signed-off-by: Ian Pickworth <ian@pickworth.me.uk>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
18 years agoV4L/DVB (3448): Cx88-input.c: add IR remote control support to CX88_BOARD_PROLINK_PLA...
Matheus Izvekov [Sun, 12 Mar 2006 02:54:58 +0000 (23:54 -0300)]
V4L/DVB (3448): Cx88-input.c: add IR remote control support to CX88_BOARD_PROLINK_PLAYTVPVR

This patch adds support for the IR remote control found in the card
CX88_BOARD_PROLINK_PLAYTVPVR.

Signed-off-by: Matheus Izvekov <mizvekov@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
18 years agoV4L/DVB (3447): Cx88-cards.c: fix values of gpio0 for card CX88_BOARD_PROLINK_PLAYTVPVR
Matheus Izvekov [Sun, 12 Mar 2006 02:54:24 +0000 (23:54 -0300)]
V4L/DVB (3447): Cx88-cards.c: fix values of gpio0 for card CX88_BOARD_PROLINK_PLAYTVPVR

This patch changes the gpio0 values for the card CX88_BOARD_PROLINK_PLAYTVPVR
to the ones observed using RegSpy from the dscaler project.

Signed-off-by: Matheus Izvekov <mizvekov@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
18 years agoV4L/DVB (3446): Saa7134: add support for AVerMedia A169 Dual Analog tuner card
Rickard Osser [Sat, 11 Mar 2006 20:14:12 +0000 (17:14 -0300)]
V4L/DVB (3446): Saa7134: add support for AVerMedia A169 Dual Analog tuner card

- Added support for AVerMedia A169 Dual Analog tuner card
  (dual saa7134 decoders - only 1 working right now)
- Added autodetection for both parts of the card.
  It shows up like 2 cards, B1 and B
- Enabled tuner B1, SVIDEO on B1 and composite1 through SVIDEO,
  FIXME: B is more or less dead at this point and I suspect the
  FM-radio is on the B part of the board

Signed-off-by: Rickard Osser <ricky@osser.se>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
18 years agoV4L/DVB (3445): LG TALN series: add PAL / SECAM support
Michael Krufky [Sat, 11 Mar 2006 20:02:01 +0000 (17:02 -0300)]
V4L/DVB (3445): LG TALN series: add PAL / SECAM support

- added tuner_lg_taln_pal_secam_ranges
- renamed tuner 66 from TUNER_LG_NTSC_TALN_MINI to TUNER_LG_TALN
- updated FlyTV mini Asus Digimatrix with new tuner

Thanks-to: Rickard Osser <ricky@osser.se>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
18 years agoV4L/DVB (3444): Saa7134: small whitespace cleanup
Michael Krufky [Sat, 11 Mar 2006 19:21:36 +0000 (16:21 -0300)]
V4L/DVB (3444): Saa7134: small whitespace cleanup

- matched indents on quotes within a printk

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
18 years agoV4L/DVB (3443): Thomson FE6600: add missing "count" array element
Michael Krufky [Sat, 11 Mar 2006 19:12:35 +0000 (16:12 -0300)]
V4L/DVB (3443): Thomson FE6600: add missing "count" array element

- added missing "count" element in Thomson FE6600

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
18 years agoV4L/DVB (3439): Added no_overlay option and quirks to saa7134
Mauro Carvalho Chehab [Fri, 10 Mar 2006 19:46:50 +0000 (16:46 -0300)]
V4L/DVB (3439): Added no_overlay option and quirks to saa7134

Some chipsets have several problems when pci to pci transfers are activated
on overlay mode. the option no_overlay allows disabling such feature of
the driver, in favor of keeping the system stable.
The default is to use pcipci_fail flag defined on drivers/pci/quirks.c.
It also allows the user to override it by forcing disable overlay or forcing
enable. Forcing enable may generate PCI transfer corruption, including disk
mass corruption, so should be used with care.
Added a text description to this option and make messages looks the same at
both bttv and saa7134 drivers.

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
18 years agoV4L/DVB (3438): Optical cleanup for dmxdev.c
Andreas Oberritter [Fri, 10 Mar 2006 18:22:31 +0000 (15:22 -0300)]
V4L/DVB (3438): Optical cleanup for dmxdev.c

Used Lindent, manually changed some line breaks. Removed invalid email
addresses, useless casts and useless initialization of return values.

Signed-off-by: Andreas Oberritter <obi@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
18 years agoV4L/DVB (3437): Fix typo in enum name and use enum in struct dmxdev_filter
Andreas Oberritter [Fri, 10 Mar 2006 18:21:58 +0000 (15:21 -0300)]
V4L/DVB (3437): Fix typo in enum name and use enum in struct dmxdev_filter

Rename 'enum dmxdevype' to 'enum dmxdev_type' and use this enum instead
of int for the member 'type' of struct dmxdev_filter.

Signed-off-by: Andreas Oberritter <obi@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
18 years agoV4L/DVB (3436): Remove 'dvbdev' from struct dmxdev_filter
Andreas Oberritter [Fri, 10 Mar 2006 18:21:43 +0000 (15:21 -0300)]
V4L/DVB (3436): Remove 'dvbdev' from struct dmxdev_filter

The member dvbdev gets initialized once but is never used after that.

Signed-off-by: Andreas Oberritter <obi@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
18 years agoV4L/DVB (3435): Remove 'pid' from struct dmxdev_filter
Andreas Oberritter [Fri, 10 Mar 2006 18:21:28 +0000 (15:21 -0300)]
V4L/DVB (3435): Remove 'pid' from struct dmxdev_filter

The PID value is already stored in struct dmx_sct_filter_params which is
a member of struct dmxdev_filter.
Acked-by: Johannes Stezenbach <js@linuxtv.org>
Signed-off-by: Andreas Oberritter <obi@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
18 years agoV4L/DVB (3425): Correct gpio values for Aver 303 Studio in v4l-dvb tree
Marcin Rudowski [Thu, 9 Mar 2006 19:09:51 +0000 (16:09 -0300)]
V4L/DVB (3425): Correct gpio values for Aver 303 Studio in v4l-dvb tree

Old values generally works in A2 mono, but new ones allows:
- detect and use Nicam stereo
- mute in tv
- use radio FM

Signed-off-by: Marcin Rudowski <mar_rud@poczta.onet.pl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
18 years agoV4L/DVB (3424): Updated CARDLIST.tuner with newer tenna string
Mauro Carvalho Chehab [Thu, 9 Mar 2006 19:09:20 +0000 (16:09 -0300)]
V4L/DVB (3424): Updated CARDLIST.tuner with newer tenna string

Also Removed whitespaces introduced by previous tena patch

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
18 years agoV4L/DVB (3423): Fix cx88 error messages on balance change
Ian Pickworth [Thu, 9 Mar 2006 15:03:40 +0000 (12:03 -0300)]
V4L/DVB (3423): Fix cx88 error messages on balance change

There is an error in the cx88 code that causes this message in the syslog when
balance is changed at full volume:
Mar  4 18:35:08 ian2 kernel: cx88[0]: irq pci [0x1] vid*
Mar  4 18:35:39 ian2 last message repeated 348 times
Mar  4 18:36:01 ian2 last message repeated 564 times
... and so on
The attached patch cures this problem.

Signed-off-by: Ian Pickworth <ian@pickworth.me.uk>
Signed-off-by: Marcin Rudowski <mar_rud@poczta.onet.pl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
18 years agoV4L/DVB (3420): Nskips maybe used uninitialized in bttv_risc_overlay
Duncan Sands [Thu, 9 Mar 2006 14:20:14 +0000 (11:20 -0300)]
V4L/DVB (3420): Nskips maybe used uninitialized in bttv_risc_overlay

The Coverity checker (previously Stanford checker) noticed that
the value of nskips could be read even if it was never written.

Signed-off-by: Duncan Sands <baldrick@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
18 years agoV4L/DVB (3419): This patch fixes Tuner TNF5335 family
Mauro Carvalho Chehab [Thu, 9 Mar 2006 14:17:43 +0000 (11:17 -0300)]
V4L/DVB (3419): This patch fixes Tuner TNF5335 family

Radio now works.
Tuner now supports both PAL/D and STD/MN models

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
18 years agoMerge branch 'origin'
Linus Torvalds [Tue, 21 Mar 2006 16:52:18 +0000 (08:52 -0800)]
Merge branch 'origin'

Conflicts:
Documentation/video4linux/CARDLIST.cx88
drivers/media/video/cx88/Kconfig
drivers/media/video/em28xx/em28xx-video.c
drivers/media/video/saa7134/saa7134-dvb.c

Resolved as in the original merge by Mauro Carvalho Chehab

18 years ago[libata] sata_mv: fix irq port status usage
Jeff Garzik [Tue, 21 Mar 2006 00:49:54 +0000 (19:49 -0500)]
[libata] sata_mv: fix irq port status usage

Interrupt handler did not properly initialize a variable on a per-port
basis, leading to incorrect behavior on ports other than port 0.

Bug caught and fixed by Mark Lord.

Signed-off-by: Jeff Garzik <jeff@garzik.org>
18 years agoMerge master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6
Linus Torvalds [Mon, 20 Mar 2006 19:57:50 +0000 (11:57 -0800)]
Merge /pub/scm/linux/kernel/git/davem/sparc-2.6

* master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6: (230 commits)
  [SPARC64]: Update defconfig.
  [SPARC64]: Fix 2 bugs in huge page support.
  [SPARC64]: CONFIG_BLK_DEV_RAM fix
  [SPARC64]: Optimized TSB table initialization.
  [SPARC64]: Allow CONFIG_MEMORY_HOTPLUG to build.
  [SPARC64]: Use SLAB caches for TSB tables.
  [SPARC64]: Don't kill the page allocator when growing a TSB.
  [SPARC64]: Randomize mm->mmap_base when PF_RANDOMIZE is set.
  [SPARC64]: Increase top of 32-bit process stack.
  [SPARC64]: Top-down address space allocation for 32-bit tasks.
  [SPARC64] bbc_i2c: Fix cpu check and add missing module license.
  [SPARC64]: Fix and re-enable dynamic TSB sizing.
  [SUNSU]: Fix missing spinlock initialization.
  [TG3]: Do not try to access NIC_SRAM_DATA_SIG on Sun parts.
  [SPARC64]: First cut at VIS simulator for Niagara.
  [SPARC64]: Fix system type in /proc/cpuinfo and remove bogus OBP check.
  [SPARC64]: Add SMT scheduling support for Niagara.
  [SPARC64]: Fix 32-bit truncation which broke sparsemem.
  [SPARC64]: Move over to sparsemem.
  [SPARC64]: Fix new context version SMP handling.
  ...

18 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/shaggy...
Linus Torvalds [Mon, 20 Mar 2006 18:32:33 +0000 (10:32 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/shaggy/jfs-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/shaggy/jfs-2.6:
  JFS: add uid, gid, and umask mount options
  JFS: Take logsync lock before testing mp->lsn
  JFS: kzalloc conversion
  JFS: Add missing file from fa3241d24cf1182b0ffb6e4d412c3bc2a2ab7bf6
  JFS: Use the kthread_ API
  JFS: Fix regression.  fsck complains if symlinks do not have INLINEEA attribute
  JFS: ext2 inode attributes for jfs
  JFS: semaphore to mutex conversion.
  JFS: make buddy table static
  JFS: Add back directory i_size calculations for legacy partitions

18 years agoMerge branch 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik...
Linus Torvalds [Mon, 20 Mar 2006 18:30:31 +0000 (10:30 -0800)]
Merge branch 'upstream-linus' of /linux/kernel/git/jgarzik/netdev-2.6

* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: (150 commits)
  [PATCH] ipw2100: Update version ipw2100 stamp to 1.2.2
  [PATCH] ipw2100: move mutex.h include from ipw2100.c to ipw2100.h
  [PATCH] ipw2100: semaphore to mutexes conversion
  [PATCH] ipw2100: Fix radiotap code gcc warning
  [PATCH] ipw2100: add radiotap headers to packtes captured in monitor mode
  [PATCH] ipw2x00: expend Copyright to 2006
  [PATCH] drivers/net/wireless/ipw2200.c: fix an array overun
  [PATCH] ieee80211: Don't update network statistics from off-channel packets.
  [PATCH] ipw2200: Update ipw2200 version stamp to 1.1.1
  [PATCH] ipw2200: switch to the new ipw2200-fw-3.0 image format
  [PATCH] ipw2200: wireless extension sensitivity threshold support
  [PATCH] ipw2200: Enables the "slow diversity" algorithm
  [PATCH] ipw2200: Set a meaningful silence threshold value
  [PATCH] ipw2200: export `debug' module param only if CONFIG_IPW2200_DEBUG
  [PATCH] ipw2200: Change debug level for firmware error logging
  [PATCH] ipw2200: Filter unsupported channels out in ad-hoc mode
  [PATCH] ipw2200: Fix ipw_sw_reset() implementation inconsistent with comment
  [PATCH] ipw2200: Fix rf_kill is activated after mode change with 'disable=1'
  [PATCH] ipw2200: remove the WPA card associates to non-WPA AP checking
  [PATCH] ipw2200: Add signal level to iwlist scan output
  ...

18 years agoMerge branch 'block-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro...
Linus Torvalds [Mon, 20 Mar 2006 18:28:51 +0000 (10:28 -0800)]
Merge branch 'block-fixes' of git://git./linux/kernel/git/viro/block

* 'block-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/block:
  [PATCH] fix rmmod problems with elevator attributes, clean them up
  [PATCH] elevator_t lifetime rules and sysfs fixes
  [PATCH] noise removal: cfq-iosched.c
  [PATCH] don't bother with refcounting for cfq_data
  [PATCH] fix sysfs interaction and lifetime rules handling for queues
  [PATCH] regularize blk_cleanup_queue() use
  [PATCH] fix cfq_get_queue()/ioprio_set(2) races
  [PATCH] deal with rmmod/put_io_context() races
  [PATCH] stop elv_unregister() from rogering other iosched's data, fix locking
  [PATCH] stop cfq from pinning queue down
  [PATCH] make cfq_exit_queue() prune the cfq_io_context for that queue
  [PATCH] fix the exclusion for ioprio_set()
  [PATCH] keep sync and async cfq_queue separate
  [PATCH] switch to use of ->key to get cfq_data by cfq_io_context
  [PATCH] stop leaking cfq_data in cfq_set_request()
  [PATCH] fix cfq hash lookups
  [PATCH] fix locking in queue_requests_store()
  [PATCH] fix double-free in blk_init_queue_node()
  [PATCH] don't do exit_io_context() until we know we won't be doing any IO

18 years agoIB/mthca: Query SRQ srq_limit fixes
Eli Cohen [Mon, 13 Mar 2006 12:33:01 +0000 (14:33 +0200)]
IB/mthca: Query SRQ srq_limit fixes

Fix endianness handling of srq_limit: it is big-endian in the context
structure, so we need to swab it before returning it.

Also add support for srq_limit query for Tavor (non-MemFree) HCAs.

Signed-off-by: Eli Cohen <eli@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
18 years agoIPoIB: Get rid of useless test of queue length
Roland Dreier [Mon, 20 Mar 2006 18:08:26 +0000 (10:08 -0800)]
IPoIB: Get rid of useless test of queue length

In neigh_add_path(), the queue of delayed packets can never be full,
because the queue is always freshly created and cannot be found by any
other code path.  In fact, the test of the queue length is worse than
useless: if somehow the test ever triggered and path_rec_start() also
failed, then dev_kfree_skb_any() will be called twice on the same skb.
Fix this by deleting the useless test.  Pointed out by Michael
S. Tsirkin <mst@mellanox.co.il>.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
18 years agoIB/mthca: Correct reported SRQ size in MemFree case.
Dotan Barak [Mon, 20 Mar 2006 18:08:26 +0000 (10:08 -0800)]
IB/mthca: Correct reported SRQ size in MemFree case.

MemFree devices need to reserve one shared receive queue (SRQ) work
request for internal use, so the capacity returned from the create_srq
and query_srq methods should be srq->max - 1.

Signed-off-by: Dotan Barak <dotanb@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
18 years agoIB/mad: Fix oopsable race on device removal
Michael S. Tsirkin [Mon, 20 Mar 2006 18:08:25 +0000 (10:08 -0800)]
IB/mad: Fix oopsable race on device removal

Fix an oopsable race debugged by Eli Cohen <eli@mellanox.co.il>:
After removing the port from port_list, ib_mad_port_close flushes
port_priv->wq before destroying the special QPs. This means that a
completion event could arrive, and queue a new work in this work queue
after flush.

This patch also removes an unnecessary flush_workqueue():
destroy_workqueue() already includes a flush.

Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
18 years agoIB/srp: Coverity fix to srp_parse_options()
Roland Dreier [Mon, 20 Mar 2006 18:08:25 +0000 (10:08 -0800)]
IB/srp: Coverity fix to srp_parse_options()

Fix leak found by Coverity: in the SRP_OPT_DGID case,
srp_parse_options() didn't free the result of match_strdup().

Signed-off-by: Roland Dreier <rolandd@cisco.com>
18 years agoIB/mthca: Coverity fix to mthca_init_eq_table()
Roland Dreier [Mon, 20 Mar 2006 18:08:25 +0000 (10:08 -0800)]
IB/mthca: Coverity fix to mthca_init_eq_table()

Fix bug found by coverity: the loop body never executed, because it
was doing for (i = 0; i < MTHCA_EQ_CMD; ++i), but MTHCA_EQ_CMD is 0.
The correct loop bound is MTHCA_NUM_EQ, to loop over all EQs.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
18 years agoIB: Coverity fixes to sysfs.c
Roland Dreier [Mon, 20 Mar 2006 18:08:25 +0000 (10:08 -0800)]
IB: Coverity fixes to sysfs.c

Fix two bugs found by coverity:
 - Memory leak in error path of alloc_group_attrs()
 - Fencepost error in state_show(): the test should be < ARRAY_SIZE(),
   not <= ARRAY_SIZE().

Signed-off-by: Roland Dreier <rolandd@cisco.com>
18 years agoIPoIB: Move ipoib_ib_dev_flush() to ipoib workqueue
Jack Morgenstein [Mon, 20 Mar 2006 18:08:24 +0000 (10:08 -0800)]
IPoIB: Move ipoib_ib_dev_flush() to ipoib workqueue

Move ipoib_ib_dev_flush() to ipoib's workqueue.  This keeps it ordered
with respect to other work scheduled by the ipoib driver.  This fixes
problems with races, for example:
 - ipoib_ib_dev_flush() has started running because of an IB event
 - user does ifconfig ib0 down
 - ipoib_mcast_stop_thread() gets called twice and waits for the same
   completion twice

Signed-off-by: Jack Morgenstein <jackm@mellanox.co.il>
Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
18 years agoIPoIB: Fix build now that neighbour destructor is in neigh_params
Roland Dreier [Tue, 7 Mar 2006 19:21:08 +0000 (11:21 -0800)]
IPoIB: Fix build now that neighbour destructor is in neigh_params

Fix the IPoIB build (which is broken in net-2.6.17 because of my
screw-up, which left out this chunk in ipoib_multicast.c).
The neighbour destructor is now in neigh_params, so we don't
need to clear it in the ops structure.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
18 years agoIB/uverbs: Use correct alt_pkey_index in modify QP
Ami Perlmutter [Mon, 20 Mar 2006 18:08:24 +0000 (10:08 -0800)]
IB/uverbs: Use correct alt_pkey_index in modify QP

The old code incorrectly used the primary P_Key index as the alternate
index too.

Signed-off-by: Ami Perlmutter <amip@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
18 years agoIB/umad: Add support for large RMPP transfers
Jack Morgenstein [Sat, 4 Mar 2006 05:54:13 +0000 (21:54 -0800)]
IB/umad: Add support for large RMPP transfers

Add support for sending and receiving large RMPP transfers.  The old
code supports transfers only as large as a single contiguous kernel
memory allocation.  This patch uses linked list of memory buffers when
sending and receiving data to avoid needing contiguous pages for
larger transfers.

  Receive side: copy the arriving MADs in chunks instead of coalescing
  to one large buffer in kernel space.

  Send side: split a multipacket MAD buffer to a list of segments,
  (multipacket_list) and send these using a gather list of size 2.
  Also, save pointer to last sent segment, and retrieve requested
  segments by walking list starting at last sent segment. Finally,
  save pointer to last-acked segment.  When retrying, retrieve
  segments for resending relative to this pointer.  When updating last
  ack, start at this pointer.

Signed-off-by: Jack Morgenstein <jackm@mellanox.co.il>
Signed-off-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
18 years agoIB/srp: Add SCSI host attributes to show target port
Roland Dreier [Mon, 20 Mar 2006 18:08:23 +0000 (10:08 -0800)]
IB/srp: Add SCSI host attributes to show target port

Add SCSI host attributes in sysfs that show the ID extension, IOC
GUID, service ID, P_Key and destination GID for each target port that
the SRP initiator connects to.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
18 years agoIB/cm: Check cm_id state before handling a REP
Sean Hefty [Fri, 3 Mar 2006 00:50:37 +0000 (16:50 -0800)]
IB/cm: Check cm_id state before handling a REP

Move checking the state of a cm_id before modifying it when handling a
REP.  This fixes a bug seen under MPI scale-up testing, where a NULL
timewait_info pointer is dereferenced if a request times out before a
REP is received.

Signed-off-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
18 years agoIB/mthca: Update firmware versions
Roland Dreier [Thu, 2 Mar 2006 21:56:37 +0000 (13:56 -0800)]
IB/mthca: Update firmware versions

Update known firmware versions in driver's table to the latest releases.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
18 years agoIB/mthca: Optimize large messages on Sinai HCAs
Eli Cohen [Thu, 2 Mar 2006 20:40:46 +0000 (12:40 -0800)]
IB/mthca: Optimize large messages on Sinai HCAs

Sinai (one-port PCI Express) HCAs get improved throughput for messages
bigger than 80 KB in DDR mode if memory keys are formatted in a
specific way.  The enhancement only works if the memory key table is
smaller than 2^24 entries.  For larger tables, the enhancement is off
and a warning is printed (to avoid silent performance loss).

Signed-off-by: Eli Cohen <eli@mellanox.co.il>
Signed-off-by: Michael Tsirkin <mst@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
18 years agoIB/uverbs: Fix query QP return of sq_sig_all
Dotan Barak [Thu, 2 Mar 2006 19:25:27 +0000 (11:25 -0800)]
IB/uverbs: Fix query QP return of sq_sig_all

The old code didn't convert from the kernel's enum correctly.

Signed-off-by: Dotan Barak <dotanb@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
18 years agoIB: Fix modify QP checking of "current QP state" attribute
Dotan Barak [Thu, 2 Mar 2006 19:22:28 +0000 (11:22 -0800)]
IB: Fix modify QP checking of "current QP state" attribute

According to the IB spec version 1.2, section 11.2.4.2, the current
table has a couple of mistakes where it allows the current QP state
(IB_QP_CUR_STATE) attribute.  For the transitions:

  RTS -> RTS: IB_QP_CUR_STATE should be allowed for all transports
  SQD -> SQD: IB_QP_CUR_STATE should never be allowed

Signed-off-by: Dotan Barak <dotanb@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
18 years agoIPoIB: Fix multicast race between canceling and completing
Michael S. Tsirkin [Thu, 2 Mar 2006 19:07:47 +0000 (11:07 -0800)]
IPoIB: Fix multicast race between canceling and completing

ipoib_mcast_stop_thread currently tests mcast->query and if it is
NULL, does not perform wait_for_completion on the mcast and frees the
mcast object directly.

However, since both operations are done without locking, it is
possible that ipoib_mcast_join_complete is in progress on this mcast
object and has set mcast->query to NULL already.

Solve this by:
- taking priv->lock before we change mcast->query in ipoib_mcast_join_complete,
  and keeping it until we no longer need the mcast object
- taking priv->lock around mcast->query test in ipoib_mcast_stop_thread

Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
18 years agoIPoIB: Clean up if posting receives fails
Eli Cohen [Thu, 2 Mar 2006 19:05:19 +0000 (11:05 -0800)]
IPoIB: Clean up if posting receives fails

If posting receives in ipoib_ib_dev_open() fails, call
ipoib_ib_dev_stop() to move the device's QP back to the RESET state so
that we can try again later.

Signed-off-by: Eli Cohen <eli@mellanox.co.il>
Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
18 years agoIB/mthca: Use an enum for HCA page size
Ishai Rabinovitz [Thu, 2 Mar 2006 06:33:11 +0000 (22:33 -0800)]
IB/mthca: Use an enum for HCA page size

Use a named enum for the HCA's internal page size, rather than having
magic values of 4096 and shifts by 12 all over the code.  Also, fix
one minor bug in EQ handling: only one HCA page is mapped to the HCA
during initialization, but a full kernel page is unmapped during
cleanup.  This might cause problems when PAGE_SIZE != 4096.

Signed-off-by: Ishai Rabinovitz <ishai@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
18 years agoIB/mthca: Check alternate P_Key index when setting alternate path
Dotan Barak [Wed, 1 Mar 2006 22:28:12 +0000 (14:28 -0800)]
IB/mthca: Check alternate P_Key index when setting alternate path

Check that the alternate P_Key index is in range when setting the
alternate path for a QP.  Also make a cosmetic touch up to the debug
message printed when the main P_Key index is out of range.

Signed-off-by: Dotan Barak <dotanb@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
18 years agoIB/mthca: Add support for send work request fence flag
Dotan Barak [Tue, 28 Feb 2006 05:02:00 +0000 (21:02 -0800)]
IB/mthca: Add support for send work request fence flag

Add support for IB_SEND_FENCE flag in post_send methods.

Signed-off-by: Dotan Barak <dotanb@mellanox.co.il>
Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
18 years agoIPoIB: Close race in setting mcast->ah
Eli Cohen [Tue, 28 Feb 2006 04:47:43 +0000 (20:47 -0800)]
IPoIB: Close race in setting mcast->ah

ipoib_mcast_send() tests mcast->ah twice.  If this value is changed
between these two points, we leak an skb.  However,
ipoib_mcast_join_finish() sets mcast->ah with no locking, so it could
race against ipoib_mcast_send().

As a solution, take priv->lock around assignment to mcast->ah thus
making sure ipoib_mcast_send() (which also takes priv->lock) is not in
flight.

Signed-off-by: Eli Cohen <eli@mellanox.co.il>
Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
18 years agoIB/mthca: Implement query_ah method
Jack Morgenstein [Mon, 27 Feb 2006 00:05:59 +0000 (16:05 -0800)]
IB/mthca: Implement query_ah method

Implement query_ah (except for AVs which are in HCA memory).  This is
needed to implement RMPP duplicate session detection on sending side
(extraction of DGID/DLID and GRH flag from address handle).

Signed-off-by: Jack Morgenstein <jackm@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
18 years agoIB/mthca: Write FW commands through doorbell page
Eli Cohen [Sun, 26 Feb 2006 22:36:06 +0000 (14:36 -0800)]
IB/mthca: Write FW commands through doorbell page

This patch is checks whether the HCA supports posting FW commands
through a doorbell page (user access region 0, or "UAR0").  If this is
supported, the driver maps UAR0 and uses it for FW commands. This can
be controlled by the value of a writable module parameter
fw_cmd_doorbell.  When the parameter is 0, the commands are posted
through HCR using the old method; otherwise if HCA is capable commands
go through UAR0.

This use of UAR0 to post commands eliminates the need for polling the
"go" bit prior to posting a new command. Since reading from a PCI
device is much more expensive then issuing a posted write, it is
expected that issuing FW commands this way will provide better CPU
utilization.

Signed-off-by: Eli Cohen <eli@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
18 years agoIB/uverbs: Return actual capacity from create SRQ operation
Dotan Barak [Thu, 23 Feb 2006 20:36:18 +0000 (12:36 -0800)]
IB/uverbs: Return actual capacity from create SRQ operation

Pass actual capacity of created SRQ back to userspace, so that
userspace can report accurate capacities.  This requires an ABI bump,
to change struct ib_uverbs_create_srq_resp.

Signed-off-by: Dotan Barak <dotanb@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
18 years agoIB/mthca: Return actual capacity from create_srq
Dotan Barak [Thu, 23 Feb 2006 20:13:51 +0000 (12:13 -0800)]
IB/mthca: Return actual capacity from create_srq

Have mthca's create_srq method return the actual capacity of the SRQ
that gets created.  Also update comments in <rdma/ib_verbs.h> to
clarify that this is what is expected from ib_create_srq().

Signed-off-by: Dotan Barak <dotanb@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
18 years agoIPoIB: clarify to_ipoib_neigh()
Michael S. Tsirkin [Tue, 21 Feb 2006 05:50:39 +0000 (21:50 -0800)]
IPoIB: clarify to_ipoib_neigh()

Cosmetic change: make alignment explicit in to_ipoib_neigh.

Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
18 years agoIB/uverbs: Fix alignment of struct ib_uverbs_create_qp_resp
Roland Dreier [Thu, 16 Feb 2006 17:26:19 +0000 (09:26 -0800)]
IB/uverbs: Fix alignment of struct ib_uverbs_create_qp_resp

The size of struct ib_uverbs_create_qp_resp is not even multiple of 8
bytes.  This causes problems for low-level drivers that add private
data after the structure: 32-bit userspace will look in the wrong
place for a response from a 64-bit kernel.  Fix this by adding a
reserved field.  Also, bump the ABI version because this changes the
size of a structure.

Pointed out by Hoang-Nam Nguyen <HNGUYEN@de.ibm.com>.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
18 years agoIB/mthca: Bump driver version and release date
Roland Dreier [Tue, 14 Feb 2006 01:21:09 +0000 (17:21 -0800)]
IB/mthca: Bump driver version and release date

Signed-off-by: Roland Dreier <rolandd@cisco.com>
18 years agoIB/mthca: Support for query QP and SRQ
Eli Cohen [Tue, 14 Feb 2006 00:40:21 +0000 (16:40 -0800)]
IB/mthca: Support for query QP and SRQ

Implement the query_qp and query_srq methods in mthca.

Signed-off-by: Eli Cohen <eli@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
18 years agoIB/uverbs: Support for query SRQ from userspace
Dotan Barak [Tue, 14 Feb 2006 00:31:57 +0000 (16:31 -0800)]
IB/uverbs: Support for query SRQ from userspace

Add support to uverbs to handle querying userspace SRQs (shared
receive queues), including adding an ABI for marshalling requests and
responses.  The kernel midlayer already has the underlying
ib_query_srq() function.

Signed-off-by: Dotan Barak <dotanb@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
18 years agoIB/uverbs: Support for query QP from userspace
Dotan Barak [Tue, 14 Feb 2006 00:31:25 +0000 (16:31 -0800)]
IB/uverbs: Support for query QP from userspace

Add support to uverbs to handle querying userspace QPs (queue pairs),
including adding an ABI for marshalling requests and responses.  The
kernel midlayer already has the underlying ib_query_qp() function.

Signed-off-by: Dotan Barak <dotanb@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
18 years agoIB: Whitespace cleanups
Roland Dreier [Tue, 14 Feb 2006 00:30:49 +0000 (16:30 -0800)]
IB: Whitespace cleanups

Remove trailing whitespace and fix indentation that with spaces
instead of tabs.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
18 years agoIB/mthca: Convert to use ib_modify_qp_is_ok()
Roland Dreier [Tue, 14 Feb 2006 00:30:18 +0000 (16:30 -0800)]
IB/mthca: Convert to use ib_modify_qp_is_ok()

Use ib_modify_qp_is_ok() in mthca, and delete the big table of
attributes for queue pair state transitions.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
18 years agoIB: Add ib_modify_qp_is_ok() library function
Roland Dreier [Mon, 13 Feb 2006 20:48:12 +0000 (12:48 -0800)]
IB: Add ib_modify_qp_is_ok() library function

The in-kernel mthca driver contains a table of which attributes are
valid for each queue pair state transition.  It turns out that both
other IB drivers -- ipath and ehca -- which are being prepared for
merging have copied this table, errors and all.

To forestall this code duplication, move this table and the code to
check parameters against it into a midlayer library function,
ib_modify_qp_is_ok().

Signed-off-by: Roland Dreier <rolandd@cisco.com>
18 years agoIB/mthca: Generate SQ drained events when requested
Roland Dreier [Fri, 3 Feb 2006 22:53:28 +0000 (14:53 -0800)]
IB/mthca: Generate SQ drained events when requested

Add low-level driver support to ib_mthca so that consumers can request
a "send queue drained" event be generated when a transiton to the SQD
state completes.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
18 years agoIB/mad: Simplify SMI by eliminating smi_check_local_dr_smp()
Ralph Campbell [Fri, 3 Feb 2006 22:32:01 +0000 (14:32 -0800)]
IB/mad: Simplify SMI by eliminating smi_check_local_dr_smp()

The call to ib_get_agent_port() shouldn't be possible to fail when
smi_check_local_dr_smp() is called from ib_mad_recv_done_handler().
When it is called from handle_outgoing_dr_smp(), the device and
port_num come from mad_agent_priv so I assume the call to
ib_get_agent_port() shouldn't fail either.  In either case,
smi_check_local_smp() only uses the mad_agent pointer to check that
mad_agent->device->process_mad is not NULL.  The device pointer would
have to be the same as the one passed to smi_check_local_dr_smp()
since that pointer is used later instead of the one checked in
smi_check_local_smp().

Signed-off-by: Hal Rosenstock <halr@voltaire.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
18 years agoIB/mad: Remove redundant check from smi_check_local_dr_smp()
Ralph Campbell [Fri, 3 Feb 2006 22:30:24 +0000 (14:30 -0800)]
IB/mad: Remove redundant check from smi_check_local_dr_smp()

smi_check_local_dr_smp() is called only from two places in core/mad.c
It returns 0 or 1.  In smi_check_local_dr_smp(), it checks for
a directed route SMP but this function is only called when the SMP
is a directed route so this is a NOP.

Signed-off-by: Hal Rosenstock <halr@voltaire.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
18 years agoIB: Enable FMR pool user to set page size
Or Gerlitz [Thu, 2 Feb 2006 18:43:45 +0000 (10:43 -0800)]
IB: Enable FMR pool user to set page size

This patch allows the consumer to set the page size of "pages" mapped
by the pool FMRs, which is a feature already existing in the base
verbs API.  On the cosmetic side it changes ib_fmr_attr.page_size field
to be named page_shift.

Signed-off-by: Or Gerlitz <ogerlitz@voltaire.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
18 years agoIB/mthca: Add modify_device method to set node description
Roland Dreier [Thu, 2 Feb 2006 18:04:19 +0000 (10:04 -0800)]
IB/mthca: Add modify_device method to set node description

Add a modify_device method to mthca, which implements setting the node
description.  This makes the writable "node_desc" sysfs attribute work
for Mellanox HCAs.

Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>