greybus: hid: Move request/response structure/definitions to greybus_protocols.h

These must be exposed to external modules, like gbsim. Move them to
greybus_protocols.h file.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: battery: Move request/response structure/definitions to greybus_protocols.h

These must be exposed to external modules, like gbsim. Move them to
greybus_protocols.h file.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: protocol: send own protocol version while requesting it

The greybus specifications clearly say (for all protocols) that the
sender is responsible for sending the highest version of protocol it
supports, while it requests the same from the receiver.

But the greybus code never followed that.

Fix, this by always sending AP's version of the protocol, while
requesting the same from svc/module.

This also renames 'response' to 'version' in gb_protocol_get_version()
as it is used for both request/response.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: Merge branch 'master' into branch 'svc'.

This drags in the firmware driver, and the start of some loopback
changes.

Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: connection: Send protocol version for firmware protocol

As per greybus specs, we need to send the protocol version for firmware
protocol and so this special case Hack.

Probably we should always send the protocol version AP supports and kill
this hack completely. But then it requires updates to specs as well, and
that should be done after some discussion.

For now, add a FIXME for that and a special case for firmware protocol.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: Add firmware protocol driver

This adds firmware protocol driver based on the latest specs available
on mailing lists. This uses the firmware framework present in kernel.

Refer Documentation/firmware_class/README on how it works.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: protocol: Create request structure from within gb_protocol_get_version()

The version request can only send the version of protocol for which it
is initiated and gb_protocol_get_version() has all the information to
create the request structure.

Replace the 'request' and 'request_size' arguments to
gb_protocol_get_version() with a bool to know if the version information
of the protocol should be sent or not.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: interface: Preserve data received during hotplug event

This shall be used later to find a firmware blob for the interface, lets
save it in the interface structure.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: loopback: handle timestamp roll-over

This patch ensures we account for roll-over in the loopback driver.
do_gettimeofday() is used to grab a timestamp. Two timestamps are derived
one before and one after a gb_operation_sync(), however since
do_gettimeofday() returns the number of seconds and mircoseconds that have
elapsed today - we need to account for a situation where the timestamp
starts at say 23:59:999us rolls over and the end time is now earlier than
the start time.

Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: loopback: functionally decompose calculation of turn-around times

We have a pattern similar to this over and over again gb->elapsed_nsecs =
timeval_to_ns(&te) - timeval_to_ns(&ts); good software practice dictates we
functionally decompose this. This patch decomposes into
gb_loopback_calc_latency().

Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: es-drivers: add outbound timestamp to connection

In order to facilitate grabbing a timestamp that doesn't include greybus
overhead, this patch adds a timestamp right before usb_submit_urb() for
both es1.c and es2.c. Long term the timestmaping of messages like this
probably wants to go away but, for the moment it may have some use to the
firmware people instrumenting the performance of the system.

Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: connection: add a timestamp kfifo to track connection handoff

For the ES2 test activity it may be beneficial to have a performance
metric that doesn't include any of the greybus stack malloc, workqueues
etc. In order to faciltate, this patch adds a simple kfifo structure to
hold two timestamp values. One timestamp will represent the last reasonable
point a greybus outbound timestamp can be taken, the other timestamp will
represent the first reasonable point an inbound timestamp can be taken. In
order to facilitate this model, tracking the timestamps in the connection
structure appears to be the best place to keep store of this data.

Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: connection: fix jump label on device_add failure

On device_add() failure in gb_connection_create_range() we jump to
err_remove_ida. Instead we should be jumping to err_free_connection, so
change the flow to accomodate.

Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: Merge branch 'master' into branch 'svc'.

This required some hand-tweaking in connection.c, hopefully I got it all
correct...

Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: protocol: Remove unnecessary params of gb_protocol_get_version()

Some of the parameters are not really required, drop them.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: protocol: Drop define_get_version support

No more users now, drop it.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: svc: preserve major/minor of protocol supported by SVC

These weren't preserved earlier, save them in the connection structure
instead of creating its own fields..

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: vibrator: Drop get_version support

This is done from a common place now, no need to replicate it.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: usb: Drop get_version support

This is done from a common place now, no need to replicate it.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: uart: Drop get_version support

This is done from a common place now, no need to replicate it.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: spi: Drop get_version support

This is done from a common place now, no need to replicate it.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: sdio: Drop get_version support

This is done from a common place now, no need to replicate it.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: raw: Drop get_version support

This is done from a common place now, no need to replicate it.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: pwm: Drop get_version support

This is done from a common place now, no need to replicate it.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: loopback: Drop get_version support

This is done from a common place now, no need to replicate it.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: i2c: Drop get_version support

This is done from a common place now, no need to replicate it.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: hid: Drop get_version support

This is done from a common place now, no need to replicate it.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: gpio: Drop get_version support

This is done from a common place now, no need to replicate it.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: control: Drop get_version support

This is done from a common place now, no need to replicate it.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: battery: Drop get_version support

This is done from a common place now, no need to replicate it.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: audio: Drop get_version support

This is done from a common place now, no need to replicate it.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: connection: request protocol version before initializing connection

This can (should) be done from a common place as its required for most
of the protocols. Do it.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: connection: Save major/minor supported by module

Save major/minor number supported by the module inside connection
structure, as this can be used later.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: define greybus wide protocol request numbers

Some request numbers (like invalid and get_version) are same across all
protocols. Create common macros for them.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: connection: disconnect connection on failures during initialization

Its possible for connection_init() to fail, in such cases the
disconnected event must be sent to the module.

It is missing currently, fix it.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: svc: error out only for smaller payloads received

!= was used in place of <, while comparing expected and actual payload
size. The module may be running a higher version of the protocol and
might have some extra fields (towards the end) in the structure, and the
AP needs to ignore them.

This also updates the print (expected-payload-size <
actual-payload-size), when the size doesn't match for requests received
by the module. This gives more details required for debugging.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: audio: Add '<' to the print message for short messages

This increases readability a bit more, as it tells which value is actual
size and which one is expected size.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: svc: Remove FIXME for firmware download

Its handled by the firmware driver now, drop the FIXME comment from svc
code.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: vibrator: Use (already defined) major/minor macros

We already have macros for these, use them instead of writing fixed
values.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: usb: Use (already defined) major/minor macros

We already have macros for these, use them instead of writing fixed
values.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: uart: Use (already defined) major/minor macros

We already have macros for these, use them instead of writing fixed
values.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: spi: Use (already defined) major/minor macros

We already have macros for these, use them instead of writing fixed
values.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: pwm: Use (already defined) major/minor macros

We already have macros for these, use them instead of writing fixed
values.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: i2c: Use (already defined) major/minor macros

We already have macros for these, use them instead of writing fixed
values.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: hid: Use (already defined) major/minor macros

We already have macros for these, use them instead of writing fixed
values.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: gpio: Use (already defined) major/minor macros

We already have macros for these, use them instead of writing fixed
values.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: battery: Use (already defined) major/minor macros

We already have macros for these, use them instead of writing fixed
values.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: hid: spell fix (s/infomation/information)

Minor spell fix.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: sdio: error out only for smaller payloads received

!= was used in place of <, while comparing expected and actual payload
size. The module may be running a higher version of the protocol and
might have some extra fields (towards the end) in the structure, and the
AP needs to ignore them.

This also updates the print (expected-payload-size <
actual-payload-size), when the size doesn't match for requests received
by the module. This gives more details required for debugging.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: svc: Handle hotplug request from a workqueue

Bringing up a module can be time consuming, as that may require lots of
initialization on the module side. Over that, we may also need to
download the firmware first and flash that on the module.

In order to make other hotplug events to not wait for all this to
finish, handle most of module hotplug stuff outside of the hotplug
callback, with help of a workqueue.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: svc: Print expected/actual payload size on mismatch

Print (expected-payload-size actual-payload-size), when the size doesn't
match for requests received by the module. This gives more details
required for debugging the issue.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: Merge branch 'master' into svc

Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: gpio: Print expected/actual payload size on mismatch

Print (expected-payload-size actual-payload-size), when the size doesn't
match for requests received by the module. This gives more details
required for debugging the issue.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: raw: Print expected/actual payload size on mismatch

Print (expected-payload-size actual-payload-size), when the size doesn't
match for requests received by the module. This gives more details
required for debugging the issue.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: kernel_ver.h: define U32_MAX and U64_MAX

These were not defined, and I just posted patches that use them.

Signed-off-by: Alex Elder <elder@linaro.org>
Tested-by: Mark Greer <mgreer@animalcreek.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: loopback: fix connection cleanup paths

The error paths in gb_loopback_connection_init() are kind of screwed
up--not in proper order, and the label naming convention seems a
little inconsistent.

Fix this, ensuring each error cleans up the setup that's been done
up to that point.  Use the convention that the label indicates the
first thing that needs to be cleaned up.

Reorder the statements in gb_loopback_connection_exit() to match
the order of cleanup in gb_loopback_connection_init().

Signed-off-by: Alex Elder <elder@linaro.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: loopback: compute average stats on demand only

Stop recording and updating the average every time a sample
is recorded.  Instead, compute it from the sum and count only
when it's required.

Signed-off-by: Alex Elder <elder@linaro.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: loopback: use separate attribute macro for average

Define a separate macro for displaying the average of the samples
collected.  This will be used so we can calculate the average only
when requested, rather than every time a new value gets recorded.

Signed-off-by: Alex Elder <elder@linaro.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: loopback: all read-only attributes are unsigned

The only values passed to the gb_loopback_ro_attr() macro are
unsigned 32-bit values.  So there's no need to pass a "type"
format specifier.

Signed-off-by: Alex Elder <elder@linaro.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: loopback: error is an unsigned attribute

The error count is unsigned, so fix the format specifier used in its
attribute definition.

Signed-off-by: Alex Elder <elder@linaro.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: loopback: use a 32-bit count

The count of statistical samples recorded is currently a 64-bit
value.  32 bits is sufficient, and in fact anything more than
that won't work for the do_div() call it's pass to anyway.  So make
the count field be 32 bits.

Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: loopback: record 32-bit min and max

The minimum and maximum values for stats values are always 32 bits.
Change the type for these fields to reflect this.

Signed-off-by: Alex Elder <elder@linaro.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: loopback: use u32 for stats update

The only values supplied to gb_loopback_update_stats() are 32-bits,
so change the type of the second argument to reflect that.

Signed-off-by: Alex Elder <elder@linaro.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: loopback: use U64_MAX for initialization

Use the largest representable value when initializing the "min"
field when resetting loopback statistics.

Signed-off-by: Alex Elder <elder@linaro.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: loopback: drop unneeded casts for void pointers

There is no need to cast a void pointer to a particular type.
Drop the casts used in this way, mainly in the attribute definition
macros.

Signed-off-by: Alex Elder <elder@linaro.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: looback: fix two typos

Fix two misspellings.  And add spaces around a '%' operator.

Signed-off-by: Alex Elder <elder@linaro.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: interface: declare gb_interface_destroy()

Add a public declaration for gb_interface_destroy(), matching
gb_interface_create().

It's not yet used outside "interface.c" but I suppose it
could be, and its scope is currently public.

Signed-off-by: Alex Elder <elder@linaro.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: svc: Move '{' to a new line in function definitions

That's the style we follow for kernel code.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: Merge branch 'master' into svc

Handle some merge conflicts in greybus_protocols.h due to changes on the
same structure in both branches.

Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: greybus_protocols: use only type attributes for message packing

For consistency reasons, use only type attributes for message packing.

Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Reviewed-by: Alex Elder <elder@linaro.org>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: sdio: fix message packing

Add missing packed attributes to prevent implicit structure padding.

Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Reviewed-by: Alex Elder <elder@linaro.org>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: uart: fix message packing

Add missing packed attributes to prevent implicit structure padding.

Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Reviewed-by: Alex Elder <elder@linaro.org>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: svc: fix message packing

Add missing packed attributes to prevent implicit structure padding.

Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Reviewed-by: Alex Elder <elder@linaro.org>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: greybus_protocols: fix typo in comment

Fix misspelled variable name in comment.

Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: operation: Move operation header to greybus_protocols.h

This should be exposed to external users (like gbsim). Move it to
greybus_protocols.h.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Johan Hovold <johan@hovoldconsulting.com>
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: operation: Drop alignment attribute from operation message header

The buffers allocated for message header is already 64 bit aligned and
we have explicit pad bytes in the header structure, to 64 bit align the
operation specific data.

And so there is no need to add the aligned attribute to the operation
message header. Drop it.

Suggested-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Alex Elder <elder@linaro.org>
Reviewed-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: Merge branch 'master' into svc

Get the USB driver fixes in this branch to prevent oopses from happening
when the USB host driver protocol is found in a manifest.

Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: usb: disable protocol driver

The USB bridged-PHY protocol driver currently depends on changes to USB
core that are not yet upstream.

Disable for now.

Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: usb: implement hub_control callback

Implement the hub_control callback.

Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: usb: fix hc_driver fields

Fix hc_driver description, product_desc and flags fields.

Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: usb: fix hcd allocation, deregistration and deallocation

Fix allocation, deregistration and deallocation of USB HCD, and update
the hcd_priv helper functions.

The HCD private data was not allocated correctly, something which would
lead to a crash when accessed in hcd_start. The HCD was neither
reregistered or deallocated on connection tear down.

Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: usb: renumber operation types

Renumber the current operation types.

NOTE: Protocol change.

Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: usb: clean up driver

Remove unused, broken or unneeded code and constructs.

Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: Revert "connection: remove special check for svc cport id"

This reverts commit 60b1d71fdfc2c5266051a1297df01ea0b1f3ba99 as we want
the port number to be correct in the svc branch.

Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: Merge branch 'master' into svc to keep it up to date.

Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: connection: remove special check for svc cport id

This is required to get things working for now, after the latest revert
of svc protocol is done.

Currently svc's cport id is set to 2 and that hd cport id will be used
for the third connection we make. And that protocol (which is i2c in one
of the cases), may not work as the (dis)connected event isn't sent for
it.

Fix this by getting rid of svc protocol check from (dis)connected
events for now. This must be reverted later, once svc protocol is
included again.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Tested-by: Mark Greer <mgreer@animalcreek.com>
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: initialize svc connection while creating hd

Its really part of initializing the host device and is required for
every 'hd' that is created. Lets move the call to do basic
initialization of svc connection to greybus_create_hd().

Also add a comment to specify why we need to do it that early.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: remove svc_msg.h

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: es1: create svc connection early enough

The svc connection needs to be ready before creating the URBs, otherwise
the svc version request might come in before the AP was ready to parse
them.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: interface: make gb_interface_destroy() static

The function is only called locally, so mark it static to make sparse
happy.

Tested-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: remove submit_svc from the host driver

The callback is never used anymore, so remove it from struct
greybus_host_driver as well as from the es1 and es2 drivers.

Tested-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: greybus.h: remove greybus_svc_in()

The function is gone, remove it from the header file as well.

Tested-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: svc: add flags and traffic class parameter to connection create op

The AP needs to be able to specify L4 CPort flags and traffic class
parameters on a connection-by-connection basis. Extend the connection
create operation to accept these. Since there's no policy to decide
these, fix them at TC0 with end-to-end-flow control, controlled segment
dropping, and CPort safety valve enabled.

Tested-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Perry Hung <perry@leaflabs.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: svc: connection: ask SVC to create connections

Ask the SVC to do all the necessary bits for creating a new connection.
This is skipped for the initial SVC connection.

Tested-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Perry Hung <perry@leaflabs.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: svc: create bidirectional routes on hotplug request

Upon receiving a hotplug request, we need to prepare the routing table
to allow packets to flow between the AP interface and the newly detected
interface.

Tested-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Perry Hung <perry@leaflabs.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: svc: add route create operation

Implement the SVC Protocol Route Create Operation.

Tested-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Perry Hung <perry@leaflabs.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: get rid of old svc-protocol

Its not used anymore as we have more sophisticated svc protocol in
place, lets get rid of earlier code.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Tested-by: Perry Hung <perry@leaflabs.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: es2: remove svc endpoint message handling

We have switched over to use the "new" svc messages, no more need to
have a special USB endpoint to handle them, they come through the normal
CPort messages.

Based on a patch from Viresh.

Tested-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: es1: remove svc endpoint message handling

We have switched over to use the "new" svc messages, no more need to
have a special USB endpoint to handle them, they come through the normal
CPort messages.

Based on a patch from Viresh.

Tested-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

greybus: Switch to Cport 0 for svc and control protocol

Initially we fixed it to Cport 2, but its changed to Cport 0 now. Lets
switch that in code as well.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Tested-by: Perry Hung <perry@leaflabs.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>