Staging: hv: mousevsc: Cleanup camel cased enums

Cleanup all camel cased names.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: mousevsc: Get rid of ref_count state in struct mousevsc_dev

Now get rid of the machinery for managing the life-cycle of the mousevsc_dev
as this is not needed.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: mousevsc: Now cleanup mousevsc_remove()

Now, cleanup mousevsc_remove(). The mouse driver once initialized only
receives data from the host. So, by closing the channel first in the
unload path, we can properly deal with inflight packets. So, we don't need
the machinery for managing the life-cycle of the mousevsc_dev object.
Get rid of the unnecessary code.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: mousevsc: Get rid of mousevsc_on_device_remove() by inlining code

Get rid of mousevsc_on_device_remove() by inlining code.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: mousevsc: Cleanup mousevsc_connect_to_vsp()

Cleanup mousevsc_connect_to_vsp(). There is no need to take reference on the
mousevsc device object when we are setting up the device. As part of this
cleanup get rid of get_input_device() as this function is only used here.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: mousevsc: Get rid of mousevsc_on_send_completion()

We don't need to handle the "send complete" callback - nothing needs to be done
here; get rid of the code.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: mousevsc: Cleanup alloc_input_device()

Cleanup alloc_input_device(); you can directly set the reference count.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: mousevsc: Get rid of the unused state: num_outstanding_req

Get rid of the unused state: num_outstanding_req in struct mousevsc_dev.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: mousevsc: Free allocated memory in free_input_device()

Free all allocated memory in free_input_device().

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: mousevsc: Get rid of unnecessary pr_* calls

Get rid of unnecessary pr_* calls.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: mousevsc: Cleanup error handling

Cleanup error handling in this driver; use standard Linux error codes.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: mousevsc: Get rid of unnecessary DPRINT calls

Get rid of unnecessary DPRINT calls.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: mousevsc: Cleanup and properly implement reportdesc_callback()

Cleanup and properly implement reportdesc_callback(); properly allocate the
hid_device and properly initialize the hid device structure.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: mousevsc: Use completion primitive to synchronize

Use completion primitive to synchronize.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: mousevsc: Correctly initialize the header size

Correctly initialize the header size.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: mousevsc: Handle the case where we may get bogus report desc size

Handle the case where we may get bogus report desc size from the host.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: mousevsc: Change the allocation flags to reflect interrupt context

Change the allocation flags to reflect interrupt context.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: mousevsc: Fixup some bogus WARN_ON() calls

Fix the bogus WARN_ON() calls.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: mousevsc: Get rid of the struct input_device_context

The state maintained in struct input_device_context can easily be included
in the struct mousevsc_dev structure. Simplify the code by consolidating
the state.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: mousevsc: Fixup struct hv_input_dev_info

This structure is protocol defined structure and must match the definition
on the host side. Make appropriate adjustments.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: iio: if(__LITTLE_ENDIAN) -> #ifdef __LITTLE_ENDIAN

Unsuprisingly this symbol isn't defined on big endian systems.

Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: r8712u: include module.h where needed

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: iio: adc: add includes of module.h and stat.h

fixes these build problems:

drivers/staging/iio/adc/ad7746.c:345:8: error: 'S_IWUSR' undeclared here (not in a function)
drivers/staging/iio/adc/ad7746.c:436:8: error: 'S_IRUGO' undeclared here (not in a function)
drivers/staging/iio/adc/ad7746.c:681:19: error: 'THIS_MODULE' undeclared here (not in a function)
drivers/staging/iio/adc/ad7746.c:778:1: warning: data definition has no type or storage class [enabled by default]
drivers/staging/iio/adc/ad7746.c:778:1: warning: type defaults to 'int' in declaration of 'MODULE_DEVICE_TABLE' [-Wimplicit-int]
drivers/staging/iio/adc/ad7746.c:778:1: warning: parameter names (without types) in function declaration [enabled by default]
drivers/staging/iio/adc/ad7746.c:799:15: error: expected declaration specifiers or '...' before string constant
drivers/staging/iio/adc/ad7746.c:800:20: error: expected declaration specifiers or '...' before string constant
drivers/staging/iio/adc/ad7746.c:801:16: error: expected declaration specifiers or '...' before string constant

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: removed functionality to disable N mode

NVRAM contains a parameter that can disable N mode. This functionality
is not needed. As a consequence, brcms_c_protection_upd() could be
simplified.

Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: cleaned up buffer len defines in fullmac

Code cleanup. Replaced identical definition BRCMF_C_DCMD_MAXLEN
by BRCMF_DCMD_MAXLEN. Renamed related buffer len definitions.

Signed-off-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: renamed ioctl functions/structs to dcmd

The fullmac dongle communicates with the driver using certain codes. These
codes were named 'ioctls' in the code, but this term is confusing since
it is used in kernel<->driver context. The term 'ioctl' has been replaced
with 'dcmd' for 'dongle command'.

Reported-by: Johannes Berg <johannes@sipsolutions.net>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: Arend van Spriel <arend@broadcom.com>
Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
Signed-off-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: removed 'enforce_mutex' parameter in fullmac

Parameter was always called with the value 'true'.

Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: Arend van Spriel <arend@broadcom.com>
Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
Signed-off-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: removed fullmac function brcmf_bus_devreset()

Function is not called anymore.

Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: Arend van Spriel <arend@broadcom.com>
Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
Signed-off-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: removed unused softmac mimo disable code

No element in array locale_bn[] has the 'no mimo' flag bit set.

Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: removed unused fullmac spinlock

Usage of spinlock depended on module parameters that are going to
be removed in a subsequent patch. Parameter wlc->threads_only is
always 'true'.

Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: Arend van Spriel <arend@broadcom.com>
Reviewed-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: reducing indentation levels in bcmsdh_sdmmc.c

Some functions in the source file had a lot of indentation levels
forcing statements to be spread over multiple lines impairing the
readability of the code.

Reported-by: Joe Perches <joe@perches.com>
Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: reduce indentation level in dhd_sdio.c #3

By introducing 1 new function.

Reviewed-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: reduce indentation level in dhd_sdio.c #2

By introducing 1 new function.

Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: Arend van Spriel <arend@broadcom.com>
Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
Signed-off-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: reduce indentation level in dhd_sdio.c #1

By introducing two new functions.

Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: Arend van Spriel <arend@broadcom.com>
Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
Signed-off-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: only allow one call to add_interface callback

The driver only supports one network interface to be associated
with it. Only for the first call it does actually something. For
subsequent calls it does return -ENODEV error code.

Reported-by: Johannes Berg <johannes@sipsolutions.net>
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: added __iomem qualifier to softmac phy

Code cleanup. Makes it clear when an address is mapped IO space.

Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: added __iomem qualifier to softmac dma.c

Code cleanup. Makes it clear when an address is mapped IO space.

Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: added __iomem qualifier to softmac main.c

Code cleanup. Makes it clear when an address is mapped IO space.

Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: reduced softmac sparse warnings

By declaring certain variables static. One unused array induced a warning,
array was deleted.

Reviewed-by: Arend van Spriel <arend@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: various __iomem additions to softmac.

So it is clear to the reader what memory is IO mapped

Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: cleaning up tx rate control code in softmac

Code cleanup. Code was unnecessarily complex.

Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: removed unused smac tx ampdu packet queue

A remnant of the past.

Reviewed-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: removed some unused fmac variable declarations

Reviewed-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: declared global vars in softmac phy as const

Global variables are undesirable unless they are read only.

Reported-by: Johannes Berg <johannes@sipsolutions.net>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: simple changes to softmac phy variables

Code cleanup resulting in less sparse warnings.

Reported-by: Johannes Berg <johannes@sipsolutions.net>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: use d11rxhdr structure in brcms_c_recover_tsf64()

All information needed for this function is available in the d11rxhdr
structure. This is the last place where the brcms_d11rxhdr structure
so it can be removed.

Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: move rssi computation to place we need it

The rssi computation was done upon getting the frame from the
queue, but the value is needed when filling in the receive status
data for mac80211. The call to wlc_phy_rssi_compute() has been
deferred.

Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: use endian annotated structures in brcmsmac

Structures interfacing with the device have a specific endianess and
structures exchanged between host and device have been annotated so
sparse checking can be done. The Makefile has been modified to add
the __CHECK_ENDIAN__ flag.

Reported-by: Johannes Berg <johannes@sipsolutions.net>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: convert endianess before handling the frame

The received frame from the device is in little-endian order and
converted in the receive path. However, the phy code was doing
the rssi calculation with packet in LE order. This has been changed
to do the le_to_cpu conversion before doing the rssi computation
and further receive processing.

Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: change interface for common rssi compute function

The function wlc_phy_rssi_compute() now uses d11rxhdr struct as
purely input parameter and returns the computed rssi value.

Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: changing interface to n-phy rssi compute function

The function wlc_phy_rssi_compute_nphy() was called with pointer to
brcms_d11rxhdr structure in which it filled in the received power
per antenna. However, these are not used further in the driver so
it only needs the d11rxhdr structure as input for rssi calculation.

Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: removed global variable in softmac otp

Placed variable on the stack instead and deleted unused functions.
Softmac was tested to function properly with multiple adapters in one
system.

Reported-by: Johannes Berg <johannes@sipsolutions.net>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: various global var related changes in softmac

Reported-by: Johannes Berg <johannes@sipsolutions.net>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: removed global var global_scb from softmac

Global variables are undesirable unless they are read only. Removed by
instead using an already defined Station Control Block variable in a
per-device structure.

Reported-by: Johannes Berg <johannes@sipsolutions.net>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: removed band related global vars from softmac

Global variables are undesirable unless they are read only. Variables are
now maintained in a device specific structure.

Reported-by: Johannes Berg <johannes@sipsolutions.net>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: remove unnecessary mac80211 callbacks

Several callback were implemented without executing any further
function calls into the driver. Review feedback indicated that
these could be removed.

Reported-by: Johannes Berg <johannes@sipsolutions.net>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: remove dongle firmware related debug code

When the device dies the driver could extract cpu registers on
the device to analyze the trap handling on the dongle. As the
firmware with this driver is stable this code does not belong
in the brcmfmac driver.

Reported-by: Johannes Berg <johannes@sipsolutions.net>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
Signed-off-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: make device initializer table for wme constant

For chip initialisation of the wme parameters a table is used, but
it was not marked as constant.

Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: remove unused function si_pmu_ilp_clock()

The function is not used in the driver and has been removed.

Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: use fragment number provided in transmit frame

In the transmit path the field seq_ctrl is filled in, but the fragment
number was not properly determined.

Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: remove ht_cap field from brcms_c_info structure

The field ht_cap was typed ieee80211_ht_cap from ieee80211.h. This
contained little endian annotated field cap_info resulting in sparse
endian warnings. It turned out the driver was setting the field, but
it was actually never used. Therefore it has been removed.

Reported-by: Johannes Berg <johannes@sipsolutions.net>
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: removed unused softmac workaround

WAR16165 is only used on older PCI chips, the driver does not support
these chips.

Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: removed global vars in softmac ucode handling

Moved global vars into a per-device structure.

Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: removed global var from aiutils.c

Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: removed redundant wlc->cfg struct member

After initialization ('attach'), this struct member always pointed at
the same memory as wlc->bsscfg.

Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: deleted unused array of bss configurations in softmac

List always had one element. Converted the array to a scalar.

Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: removed unused argument from softmac functions

Parameter 's2' was unused. Affected function was only used internally
to main.c and has been made static and moved above its callers.

Reported-by: Johannes Berg <johannes@sipsolutions.net>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: remove uncoditional code blocks from brcmsmac

Using a block statement to scope function variables is not
common in linux kernel development. Browsed through the brcmsmac
to remove those.

Reported-by: Johannes Berg <johannes@sipsolutions.net>
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: add module.h to various iio drivers

Since they are assuming it is there implicitly and will fail otherwise
with things like:

drivers/staging/iio/impedance-analyzer/ad5933.c:816: warning: type
 defaults to ‘int’ in declaration of ‘MODULE_AUTHOR’

drivers/staging/iio/adc/ad7280a.c:990: warning: type defaults to ‘int’
 in declaration of ‘MODULE_AUTHOR’

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: intel_sst: fix compile error

include module.h to fix the following compile errors:

drivers/staging/intel_sst/intelmid.c:52: error: expected declaration specifiers or '...' before string constant
drivers/staging/intel_sst/intelmid.c:52: warning: data definition has no type or storage class
drivers/staging/intel_sst/intelmid.c:52: warning: type defaults to 'int' in declaration of 'MODULE_AUTHOR'
drivers/staging/intel_sst/intelmid.c:52: warning: function declaration isn't a prototype
drivers/staging/intel_sst/intelmid.c:53: error: expected declaration specifiers or '...' before string constant
drivers/staging/intel_sst/intelmid.c:53: warning: data definition has no type or storage class
drivers/staging/intel_sst/intelmid.c:53: warning: type defaults to 'int' in declaration of 'MODULE_AUTHOR'
drivers/staging/intel_sst/intelmid.c:53: warning: function declaration isn't a prototype
drivers/staging/intel_sst/intelmid.c:54: error: expected declaration specifiers or '...' before string constant
drivers/staging/intel_sst/intelmid.c:54: warning: data definition has no type or storage class
drivers/staging/intel_sst/intelmid.c:54: warning: type defaults to 'int' in declaration of 'MODULE_AUTHOR'
drivers/staging/intel_sst/intelmid.c:54: warning: function declaration isn't a prototype
drivers/staging/intel_sst/intelmid.c:55: error: expected declaration specifiers or '...' before string constant
drivers/staging/intel_sst/intelmid.c:55: warning: data definition has no type or storage class
drivers/staging/intel_sst/intelmid.c:55: warning: type defaults to 'int' in declaration of 'MODULE_AUTHOR'
drivers/staging/intel_sst/intelmid.c:55: warning: function declaration isn't a prototype
drivers/staging/intel_sst/intelmid.c:56: error: expected declaration specifiers or '...' before string constant
drivers/staging/intel_sst/intelmid.c:56: warning: data definition has no type or storage class
drivers/staging/intel_sst/intelmid.c:56: warning: type defaults to 'int' in declaration of 'MODULE_DESCRIPTION'
drivers/staging/intel_sst/intelmid.c:56: warning: function declaration isn't a prototype
drivers/staging/intel_sst/intelmid.c:57: error: expected declaration specifiers or '...' before string constant
drivers/staging/intel_sst/intelmid.c:57: warning: data definition has no type or storage class
drivers/staging/intel_sst/intelmid.c:57: warning: type defaults to 'int' in declaration of 'MODULE_LICENSE'
drivers/staging/intel_sst/intelmid.c:57: warning: function declaration isn't a prototype
drivers/staging/intel_sst/intelmid.c:58: error: expected declaration specifiers or '...' before string constant
drivers/staging/intel_sst/intelmid.c:58: warning: data definition has no type or storage class
drivers/staging/intel_sst/intelmid.c:58: warning: type defaults to 'int' in declaration of 'MODULE_SUPPORTED_DEVICE'
drivers/staging/intel_sst/intelmid.c:58: warning: function declaration isn't a prototype
drivers/staging/intel_sst/intelmid.c:64: error: expected ')' before 'int'
drivers/staging/intel_sst/intelmid.c:65: error: expected ')' before string constant
drivers/staging/intel_sst/intelmid.c:66: error: expected ')' before numeric constant
drivers/staging/intel_sst/intelmid.c:67: error: expected ')' before string constant
drivers/staging/intel_sst/intelmid.c:461: warning: data definition has no type or storage class
drivers/staging/intel_sst/intelmid.c:461: warning: type defaults to 'int' in declaration of 'EXPORT_SYMBOL_GPL'
drivers/staging/intel_sst/intelmid.c:461: warning: parameter names (without types) in function declaration
drivers/staging/intel_sst/intelmid.c:475: warning: data definition has no type or storage class
drivers/staging/intel_sst/intelmid.c:475: warning: type defaults to 'int' in declaration of 'EXPORT_SYMBOL_GPL'
drivers/staging/intel_sst/intelmid.c:475: warning: parameter names (without types) in function declaration
drivers/staging/intel_sst/intelmid.c: In function 'snd_intelmad_probe':
drivers/staging/intel_sst/intelmid.c:859: error: 'THIS_MODULE' undeclared (first use in this function)
drivers/staging/intel_sst/intelmid.c:859: error: (Each undeclared identifier is reported only once
drivers/staging/intel_sst/intelmid.c:859: error: for each function it appears in.)
drivers/staging/intel_sst/intelmid.c: At top level:
drivers/staging/intel_sst/intelmid.c:989: error: 'THIS_MODULE' undeclared here (not in a function)

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Lu Guanqun <guanqun.lu@intel.com>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging:iio:imu:adis16400 rename adis16344 -> adis16334.

Part never existed under that name. Ooops

Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging:iio:adc:ad7887 stop using IIO_CHAN macro.

It's going away.

Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging:iio:adc:ad7606 remove unused chip info elements.

These are now handled through the chan_spec arrays and no one
is using them anymore.

Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging:iio:adc:ad7606 refactor to remove st->irq and st->id.

id wasn't used anywhere and st->irq can be removed by simply
passing it into the core remove function (trivially available in
the two bus implementations).

Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging;iio:adc:ad7606 use iio_sw_buffer_preenable rather than local equiv

Other than a few slight refactorings the local version was pretty standard
so replace it and rework to get rid of st->d_size which it setup.

Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging:iio:adc:ad7606 make gpio request failures more consistent

To my mind, if a gpio is specified in the board file, yet fails
to be successfully requested, that is an error condidtion and
the driver should not muddle on regardless.

This does mean unwinding the gpios on error. Also the free_gpios
function is reordered so that it is consistent with the request one
(reverse order obviously).

This patch is the category of not technically fixing anything, just
making the driver be more in line with what a reviewer will expect.

Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging:iio:adc:ad7606 trivial code style fix.

Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging:iio:adc:ad7606 add local define for chan_spec structures.

IIO_CHAN is being phased out and in this case things are so
simple it makes sense to have a local one parameter equivalent.

Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging:iio:adc:ad799x address and scan_index always match so stop using address

Saves on setting the value of address for the simple situation seen in this
device. They are already used interchangably to get data from the buffer.

Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging:iio:adc:ad799x set the device name only once.

Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging:iio:adc:ad799x use the core handling for as much of the events as possible.

Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging:iio:adc:ad799x avoid bouncing back and forth from iio_priv space.

Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging:iio:adc:ad799x use a table for frequency values rather than big switch.

Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging:iio:adc:ad799x trivial: use the convenient chan struct.

This is much cleaner than bouncing through the various structures
to get to the same thing.

Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging:iio:adc:ad799x stop using IIO_CHAN macro.

Preparation for moving driver out of staging.
That macro is a nightmare to maintain so it is going away.

Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging:iio:adc:ad799x fix incorrect scan_type descriptions.

A few of these had the wrong shifts, which would lead to
userspace hacking off the top couple of bits.  Also, one
part had the wrong accuracy.

Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

MAINTAINERS: the staging tree dropped the "-2.6" suffix

Now that we are in the 3.x days, "2.6" doesn't make sense.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: nvec: send suspend messages synchronously

The suspend commands need to be sent using the
synchronous method, otherwise the power gets
disabled before the messages are transferred.

Signed-off-by: Marc Dietrich <marvin24@gmx.de>
[jak@jak-linux.org: Rewrote commit message]
Signed-off-by: Julian Andres Klode <jak@jak-linux.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: nvec: Add a udelay(100) to nvec_interrupt

As the comment indicates, adding that udelay seems to
improve the stability of the communication, although
it is not known why this is the case.

Signed-off-by: Julian Andres Klode <jak@jak-linux.org>
Acked-by: Marc Dietrich <marvin24@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: nvec: Add missing includes and reorder them

Add the includes that are currently missing in nvec.h
and nvec.c and reorder them alphabetically.

Signed-off-by: Julian Andres Klode <jak@jak-linux.org>
Acked-by: Marc Dietrich <marvin24@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: nvec: Add myself to MAINTAINERS

I intent to support this code, especially the parts
I wrote; and will thus enter as co-maintainer.

Signed-off-by: Julian Andres Klode <jak@jak-linux.org>
Acked-by: Marc Dietrich <marvin24@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: nvec: Add battery quirk to ignore incomplete responses

The nvec_power system polls nvec for battery information. In some
cases, that part seems to be overloaded and unable to respond
fast in which case it sends an incomplete response. We need to
mark the transfer as completed, though, in order to prevent
endless retries which can kill nvec.

Signed-off-by: Julian Andres Klode <jak@jak-linux.org>
Acked-by: Marc Dietrich <marvin24@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: nvec: ps2: Always sample 4 bytes instead of just 1

Get 4 bytes of data from nvec at once instead of just a single
byte. This makes the driver more similar to nvidias and might
improve reliability.

Signed-off-by: Julian Andres Klode <jak@jak-linux.org>
Acked-by: Marc Dietrich <marvin24@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: nvec: Return error in PS2 driver if write fails

Return the return value of nvec_write_async() in the methods
returning an int.

Signed-off-by: Julian Andres Klode <jak@jak-linux.org>
Acked-by: Marc Dietrich <marvin24@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: nvec: Reject incomplete messages

Reject incomplete messages, causing the request to be
transmitted again. This should fix various problems
out there.

Signed-off-by: Julian Andres Klode <jak@jak-linux.org>
Acked-by: Marc Dietrich <marvin24@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: nvec: Handle filled up RX buffers

If no RX buffer is available in state 1, jump to state
0 again. This will produce an incredible amount of
warnings, but it is not supposed to happen anyway.

Signed-off-by: Julian Andres Klode <jak@jak-linux.org>
Acked-by: Marc Dietrich <marvin24@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: nvec: Allow TX buffers only in the upper 75% of the pool

Allow TX buffers to be allocated only in the upper 75% of the pool
to avoid a completely filled buffer preventing the driver from
processing responses. This also improves performance, as RX
allocations do not require checking buffers allocated for TX
unless there are more than 16 incoming messages -- which is
highly unlikely.

An earlier version used the lower 75% for TX messages, but
that was considered to be not that effective due to the
overlaps of RX and TX buffers mentioned above.

Signed-off-by: Julian Andres Klode <jak@jak-linux.org>
Acked-by: Marc Dietrich <marvin24@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: nvec: Export nvec_msg_free() to clients

Client code wishing to make use of nvec_write_sync() must
have a way to free the returned pointer, otherwise we run
out of poool memory fairly soon.

Signed-off-by: Julian Andres Klode <jak@jak-linux.org>
Acked-by: Marc Dietrich <marvin24@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: nvec: Move implementation-only macros out of the header

Those macros are needed only for implementation purposes and
do not have any use for other code wishing to use nvec.

Signed-off-by: Julian Andres Klode <jak@jak-linux.org>
Acked-by: Marc Dietrich <marvin24@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: nvec: Document public and private API

Add kernel-doc comments describing the functions
and structs we currently have.

Signed-off-by: Julian Andres Klode <jak@jak-linux.org>
Acked-by: Marc Dietrich <marvin24@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>