Samuel Pitoiset [Sun, 7 Jun 2015 20:40:23 +0000 (22:40 +0200)]
drm/nouveau/pm: allow to query the number of sources for a signal
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Samuel Pitoiset [Sun, 7 Jun 2015 20:40:22 +0000 (22:40 +0200)]
drm/nouveau/pm: add concept of sources
A source (or multiplexer) is a tuple addr+mask+shift which allows to
control a block of signals. The maximum number of sources that a signal
can define is arbitrary limited to 8 and this should be large enough.
This patch allows to define multi-level of sources for a signal.
Each different sources are stored to a global list and will be exposed
to the userspace through the nvif interface in order to avoid conflicts.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset at gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Samuel Pitoiset [Sun, 7 Jun 2015 20:40:21 +0000 (22:40 +0200)]
drm/nouveau/pm: allow to monitor hardware signal index 0x00
This signal index must be always allowed even if it's not clearly
defined in a domain in order to monitor a counter like 0x03020100
because it's the default value of signals.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Samuel Pitoiset [Sun, 7 Jun 2015 20:40:20 +0000 (22:40 +0200)]
drm/nouveau/pm: use hardware signals indexes instead of user-readable names
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Samuel Pitoiset [Sun, 7 Jun 2015 20:40:19 +0000 (22:40 +0200)]
drm/nouveau/pm: change signal iter to u16
16 bits is large enough to store the maximum number of signals available
for one domain (i.e. 256).
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Samuel Pitoiset [Sun, 7 Jun 2015 20:40:18 +0000 (22:40 +0200)]
drm/nouveau/pm: allow to query signals by domain
This will allow to configure performance counters with hardware signal
indexes instead of user-readable names in an upcoming patch.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Samuel Pitoiset [Sun, 7 Jun 2015 20:40:17 +0000 (22:40 +0200)]
drm/nouveau/pm: implement NVIF_PERFMON_V0_QUERY_DOMAIN method
This allows to query the number of available domains, including the
number of hardware counter and the number of signals per domain.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Samuel Pitoiset [Sun, 7 Jun 2015 20:40:16 +0000 (22:40 +0200)]
drm/nouveau/pm: prevent creating a perfctr object when signals are not found
Since a new class has been introduced to query signals, we can now
return an error when the userspace wants to monitor unknown signals.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Samuel Pitoiset [Sun, 7 Jun 2015 20:40:15 +0000 (22:40 +0200)]
drm/nouveau/pm: reorganize the nvif interface
This commit introduces the NVIF_IOCTL_NEW_V0_PERFMON class which will be
used in order to query domains, signals and sources. This separates the
querying and the counting interface.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Samuel Pitoiset [Sun, 7 Jun 2015 20:40:14 +0000 (22:40 +0200)]
drm/nouveau/pm: remove unused nvkm_perfsig_wrap() function
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Martin Peres <martin.peres@free.fr>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Samuel Pitoiset [Sun, 7 Jun 2015 20:40:13 +0000 (22:40 +0200)]
drm/nouveau/pm: remove pmu signals
PDAEMON signals don't have to be exposed by the perfmon engine.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Martin Peres <martin.peres@free.fr>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Roy Spliet [Sun, 24 May 2015 08:44:02 +0000 (10:44 +0200)]
drm/nouveau/clk/nv50: Enable user reclocking for NVA0
Tested on a few cards. Probably works quite well for most, given they should
all be GDDR3.
Signed-off-by: Roy Spliet <rspliet@eclipso.eu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Roy Spliet [Sun, 24 May 2015 08:44:01 +0000 (10:44 +0200)]
drm/nouveau/fb/gddr3: Add a few CL and WR entries observed on GTX260
Signed-off-by: Roy Spliet <rspliet@eclipso.eu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Roy Spliet [Sun, 24 May 2015 08:44:00 +0000 (10:44 +0200)]
drm/nouveau/fb/ramnv50: GDDR3 script for NVA0
This looks surprisingly similar to scripts on earlier cards as well
but they don't seem to work just yet. That... and I don't have any, which
makes it a tough job to reverse engineer.
Signed-off-by: Roy Spliet <rspliet@eclipso.eu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Roy Spliet [Sun, 24 May 2015 08:43:59 +0000 (10:43 +0200)]
drm/nouveau/bios/ramcfg: Separate out RON pull value
Signed-off-by: Roy Spliet <rspliet@eclipso.eu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Roy Spliet [Sat, 23 May 2015 08:37:47 +0000 (10:37 +0200)]
drm/nouveau/bios/rammap: Parse perf mode as if it's a rammap entry
Some of the bits in there are similar to the bits in the gt215 rammap.
Signed-off-by: Roy Spliet <rspliet@eclipso.eu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Roy Spliet [Sat, 23 May 2015 08:37:46 +0000 (10:37 +0200)]
drm/nouveau/fb/ramnv50: Ressurect timing code, use proper timing/rammap handlers
Might need some generalisation to < GT200. For those: use at your own risk!
Signed-off-by: Roy Spliet <rspliet@eclipso.eu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Roy Spliet [Sat, 23 May 2015 08:37:45 +0000 (10:37 +0200)]
drm/nouveau/fb/ramgt215: No need to cuss like that
Signed-off-by: Roy Spliet <rspliet@eclipso.eu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Roy Spliet [Sat, 23 May 2015 08:37:44 +0000 (10:37 +0200)]
drm/nouveau/fb/ramnv50: Make 0x100da0 per-partition
Like on GT215
Signed-off-by: Roy Spliet <rspliet@eclipso.eu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Roy Spliet [Sat, 23 May 2015 08:37:43 +0000 (10:37 +0200)]
drm/nouveau/bios/rammap: Pull DLLoff bit out of version 0x10 struct
In preparation of NV50 reclocking, where there is no version
Signed-off-by: Roy Spliet <rspliet@eclipso.eu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Wed, 29 Apr 2015 00:28:17 +0000 (10:28 +1000)]
remove unnecessary include
This was merged with core/device.h in an earlier commit, but somehow
never got removed.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Dave Airlie [Thu, 27 Aug 2015 03:01:57 +0000 (13:01 +1000)]
Merge branch 'drm-dwhdmi-devel' of git://ftp.arm.linux.org.uk/~rmk/linux-arm into drm-next
Here are some development updates for the Synopsis Designware HDMI driver,
which clean up some of the code, and start preparing to add audio support
to the driver. This series of patches are based on a couple of dependent
commits from the ALSA tree.
Briefly, the updates are:
- move comments which should have moved with the phy values to the IMX
part of the driver.
- clean up the phy configuration: to all lookups before starting to
program the phy.
- clean up the HDMI clock regenerator code
- use the drm_hdmi_avi_infoframe_from_display_mode() helper which allows
the code to be subsequently simplified
- remove the unused 'regmap' pointer in struct dw_hdmi
- use the bridge drm device rather than the connector (we're the bridge
code)
- remove private hsync/vsync/interlaced flags, getting them from the
DRM mode structure instead.
- implement interface functions to support audio - setting the audio
sample rate, and enabling the audio clocks.
- removal of broken pixel repetition support
- cleanup DVI vs HDMI sink handling
- enable audio only if connected device supports audio
- avoid double-enabling bridge in the sink path (once in mode_set, and
again in commit)
- rename mis-named dw_hdmi_phy_enable_power()
- fix bridge enable/disable handing, so a plug-in event doesn't
reconfigure the bridge if DRM has disabled the output
- fix from Vladimir Zapolskiy for the I2CM_ADDRESS macro name
These are primerily preparitory patches for the AHB audio driver and
the I2S audio driver (from Rockchip) for this IP.
* 'drm-dwhdmi-devel' of git://ftp.arm.linux.org.uk/~rmk/linux-arm:
drm: bridge/dw_hdmi: fix register I2CM_ADDRESS register name
drm: bridge/dw_hdmi: fix phy enable/disable handling
drm: bridge/dw_hdmi: rename dw_hdmi_phy_enable_power()
drm: bridge/dw_hdmi: avoid enabling interface in mode_set
drm: bridge/dw_hdmi: enable audio only if sink supports audio
drm: bridge/dw_hdmi: clean up HDMI vs DVI mode handling
drm: bridge/dw_hdmi: don't support any pixel doubled modes
drm: bridge/dw_hdmi: remove pixel repetition setting for all VICs
drm: bridge/dw_hdmi: introduce interfaces to enable and disable audio
drm: bridge/dw_hdmi: introduce interface to setting sample rate
drm: bridge/dw_hdmi: remove mhsyncpolarity/mvsyncpolarity/minterlaced
drm: bridge/dw_hdmi: use our own drm_device
drm: bridge/dw_hdmi: remove unused 'regmap' struct member
drm: bridge/dw_hdmi: simplify hdmi_config_AVI() a little
drm: bridge/dw_hdmi: use drm_hdmi_avi_infoframe_from_display_mode()
drm: bridge/dw_hdmi: clean up hdmi_set_clk_regenerator()
drm: bridge/dw_hdmi: clean up phy configuration
drm: imx/dw_hdmi: move phy comments
drm/edid: add function to help find SADs
Dave Airlie [Thu, 27 Aug 2015 03:01:23 +0000 (13:01 +1000)]
Merge tag 'vmwgfx-next-15-08-21' of git://people.freedesktop.org/~thomash/linux into drm-next
Pull request of 15-08-21
The third pull request for 4.3. Contains two fixes for regressions introduced
with previous pull requests.
* tag 'vmwgfx-next-15-08-21' of git://people.freedesktop.org/~thomash/linux:
drm/vmwgfx: Remove duplicate ttm_bo_device_release
drm/vmwgfx: Fix a circular locking dependency in the fbdev code
Dave Airlie [Thu, 27 Aug 2015 03:00:28 +0000 (13:00 +1000)]
Merge branch 'drm-next-4.3' of git://people.freedesktop.org/~agd5f/linux into drm-next
- DP fixes for radeon and amdgpu
- IH ring fix for tonga and fiji
- Lots of GPU scheduler fixes
- Misc additional fixes
* 'drm-next-4.3' of git://people.freedesktop.org/~agd5f/linux: (42 commits)
drm/amdgpu: fix wait queue handling in the scheduler
drm/amdgpu: remove extra parameters from scheduler callbacks
drm/amdgpu: wake up scheduler only when neccessary
drm/amdgpu: remove entity idle timeout v2
drm/amdgpu: fix postclose order
drm/amdgpu: use IB for copy buffer of eviction
drm/amdgpu: adjust the judgement of removing fence callback
drm/amdgpu: fix no sync_wait in copy_buffer
drm/amdgpu: fix last_vm_update fence is not effetive for sched fence
drm/amdgpu: add priv data to sched
drm/amdgpu: add owner for sched fence
drm/amdgpu: remove entity reference from sched fence
drm/amdgpu: fix and cleanup amd_sched_entity_push_job
drm/amdgpu: remove amdgpu_bo_list_clone
drm/amdgpu: remove the context from amdgpu_job
drm/amdgpu: remove unused parameters to amd_sched_create
drm/amdgpu: remove sched_lock
drm/amdgpu: remove prepare_job callback
drm/amdgpu: cleanup a scheduler function name
drm/amdgpu: reorder scheduler functions
...
Christian König [Tue, 25 Aug 2015 19:39:31 +0000 (21:39 +0200)]
drm/amdgpu: fix wait queue handling in the scheduler
Freeing up a queue after signalling it isn't race free.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Jammy Zhou <Jammy.Zhou@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Christian König [Mon, 24 Aug 2015 12:57:26 +0000 (14:57 +0200)]
drm/amdgpu: remove extra parameters from scheduler callbacks
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Jammy Zhou <Jammy.Zhou@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Christian König [Mon, 24 Aug 2015 12:29:40 +0000 (14:29 +0200)]
drm/amdgpu: wake up scheduler only when neccessary
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Jammy Zhou <Jammy.Zhou@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Christian König [Fri, 21 Aug 2015 13:46:43 +0000 (15:46 +0200)]
drm/amdgpu: remove entity idle timeout v2
Removing the entity from scheduling can deadlock the whole system.
Wait forever till the remaining IBs are scheduled.
v2: fix comment as well
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Jammy Zhou <Jammy.Zhou@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com> (v1)
Christian König [Tue, 25 Aug 2015 13:05:20 +0000 (15:05 +0200)]
drm/amdgpu: fix postclose order
The context needs to finish before everything else.
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Jammy Zhou <Jammy.Zhou@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Chunming Zhou [Tue, 25 Aug 2015 09:23:45 +0000 (17:23 +0800)]
drm/amdgpu: use IB for copy buffer of eviction
This aids handling buffers moves with the scheduler.
Signed-off-by: Chunming Zhou <david1.zhou@amd.com>
Reviewed-by: Christian K?nig <christian.koenig@amd.com>
Junwei Zhang [Wed, 26 Aug 2015 01:34:59 +0000 (09:34 +0800)]
drm/amdgpu: adjust the judgement of removing fence callback
The fence in the array may be skipped if wait_all is false,
thus the related callback is not initialized with list head.
So removing this kind callback will cause NULL pointer reference.
Signed-off-by: Junwei Zhang <Jerry.Zhang@amd.com>
Reviewed-by: Jammy Zhou <Jammy.Zhou@amd.com>
Chunming Zhou [Tue, 25 Aug 2015 07:12:26 +0000 (15:12 +0800)]
drm/amdgpu: fix no sync_wait in copy_buffer
when eviction is happening, if don't handle
dependency, then the fence could be dead off.
Signed-off-by: Chunming Zhou <david1.zhou@amd.com>
Reviewed-by: Jammy Zhou <Jammy.Zhou@amd.com>
Reviewed-by: Christian K?nig <christian.koenig@amd.com>
Chunming Zhou [Thu, 20 Aug 2015 10:33:59 +0000 (18:33 +0800)]
drm/amdgpu: fix last_vm_update fence is not effetive for sched fence
Signed-off-by: Chunming Zhou <david1.zhou@amd.com>
Reviewed-by: Christian K?nig <christian.koenig@amd.com>
Chunming Zhou [Mon, 24 Aug 2015 03:35:26 +0000 (11:35 +0800)]
drm/amdgpu: add priv data to sched
Signed-off-by: Chunming Zhou <david1.zhou@amd.com>
Reviewed-by: Christian K?nig <christian.koenig@amd.com>
Chunming Zhou [Mon, 24 Aug 2015 04:47:36 +0000 (12:47 +0800)]
drm/amdgpu: add owner for sched fence
Signed-off-by: Chunming Zhou <david1.zhou@amd.com>
Reviewed-by: Christian K?nig <christian.koenig@amd.com>
Christian König [Fri, 21 Aug 2015 13:18:47 +0000 (15:18 +0200)]
drm/amdgpu: remove entity reference from sched fence
Entity don't live as long as scheduler fences.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Christian König [Thu, 20 Aug 2015 14:12:50 +0000 (16:12 +0200)]
drm/amdgpu: fix and cleanup amd_sched_entity_push_job
Calling schedule() is probably the worse things we can do.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Christian König [Thu, 20 Aug 2015 15:36:28 +0000 (17:36 +0200)]
drm/amdgpu: remove amdgpu_bo_list_clone
Not used any more.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Christian König [Thu, 20 Aug 2015 15:35:34 +0000 (17:35 +0200)]
drm/amdgpu: remove the context from amdgpu_job
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Christian König [Thu, 20 Aug 2015 15:24:40 +0000 (17:24 +0200)]
drm/amdgpu: remove unused parameters to amd_sched_create
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Christian König [Thu, 20 Aug 2015 15:09:54 +0000 (17:09 +0200)]
drm/amdgpu: remove sched_lock
It isn't protecting anything.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Christian König [Thu, 20 Aug 2015 15:08:25 +0000 (17:08 +0200)]
drm/amdgpu: remove prepare_job callback
Not used any more.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Christian König [Thu, 20 Aug 2015 15:03:48 +0000 (17:03 +0200)]
drm/amdgpu: cleanup a scheduler function name
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Christian König [Thu, 20 Aug 2015 15:01:01 +0000 (17:01 +0200)]
drm/amdgpu: reorder scheduler functions
Keep run queue, entity and scheduler handling together.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Christian König [Thu, 20 Aug 2015 14:59:38 +0000 (16:59 +0200)]
drm/amdgpu: fix scheduler thread creation error checking
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Christian König [Thu, 20 Aug 2015 12:47:46 +0000 (14:47 +0200)]
drm/amdgpu: fix entity wakeup race condition
That actually didn't worked at all.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Christian König [Wed, 19 Aug 2015 15:37:52 +0000 (17:37 +0200)]
drm/amdgpu: cleanup entity picking
Cleanup function name, stop checking scheduler ready twice, but
check if kernel thread should stop instead.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Christian König [Wed, 19 Aug 2015 15:34:20 +0000 (17:34 +0200)]
drm/amdgpu: remove some more unused entity members v2
None of them are used any more.
v2: fix type in error message
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Christian König [Thu, 20 Aug 2015 15:28:36 +0000 (17:28 +0200)]
drm/amdgpu: fix user fences when scheduler is enabled
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Christian König [Thu, 20 Aug 2015 06:47:40 +0000 (14:47 +0800)]
drm/amdgpu: fix fence wait in sync_fence, instead should be in sync_rings
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Chunming Zhou <david1.zhou@amd.com>
Reviewed-by: Christian K?nig <christian.koenig@amd.com>
Christian König [Wed, 19 Aug 2015 14:12:15 +0000 (16:12 +0200)]
drm/amdgpu: rework scheduler submission handling.
Remove active_hw_rq and it's protecting queue_lock, they are unused.
User 32bit atomic for hw_rq_count, 64bits for counting to three is a bit
overkill.
Cleanup the function name and remove incorrect comments.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Jammy Zhou <Jammy.Zhou@amd.com>
Christian König [Wed, 19 Aug 2015 13:00:55 +0000 (15:00 +0200)]
drm/amdgpu: remove v_seq handling from the scheduler v2
Simply not used any more. Only keep 32bit atomic for fence sequence numbering.
v2: trivial rebase
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com> (v1)
Reviewed-by: Jammy Zhou <Jammy.Zhou@amd.com> (v1)
Reviewed-by: Chunming Zhou <david1.zhou@amd.com> (v1)
Chunming Zhou [Wed, 19 Aug 2015 08:41:19 +0000 (16:41 +0800)]
drm/amdgpu: improve sa_bo->fence by kernel fence
Signed-off-by: Chunming Zhou <david1.zhou@amd.com>
Reviewed-by: Christian K?nig <christian.koenig@amd.com>
Junwei Zhang [Wed, 19 Aug 2015 08:24:19 +0000 (16:24 +0800)]
drm/amdgpu: modify amdgpu_fence_wait_any() to amdgpu_fence_wait_multiple()
Rename the function and update the related code with this modified function.
Add the new parameter of bool wait_all.
If wait_all is true, it will return when all fences are signaled or timeout.
If wait_all is false, it will return when any fence is signaled or timeout.
Signed-off-by: Junwei Zhang <Jerry.Zhang@amd.com>
Reviewed-by: Monk Liu <monk.liu@amd.com>
Reviewed-by: Jammy Zhou <Jammy.Zhou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Alex Deucher [Tue, 25 Aug 2015 02:46:13 +0000 (22:46 -0400)]
drm/amdgpu: fix IH ring allocation for bus addresses (v2)
Use pci_alloc_consistent rather than kzalloc since we
need 256 byte aligned memory for the ring buffer.
v2: fix copy paste typo in free function noticed
by Jammy.
bug:
https://bugs.freedesktop.org/show_bug.cgi?id=91749
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Jammy Zhou <Jammy.Zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Dave Airlie [Tue, 25 Aug 2015 07:23:36 +0000 (17:23 +1000)]
Revert "drm/atomic: Call ww_acquire_done after check phase is complete"
This reverts commit
992cbf19b32900efa17850b9fa0031fd623edd4d.
Until we make fbdev layer atomic we can't call this.
Requested-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com?
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Dave Airlie [Mon, 24 Aug 2015 06:36:42 +0000 (16:36 +1000)]
Merge tag 'v4.2-rc8' into drm-next
Linux 4.2-rc8
Backmerge required for Intel so they can fix their -next tree up properly.
Linus Torvalds [Mon, 24 Aug 2015 03:52:59 +0000 (20:52 -0700)]
Linux 4.2-rc8
Mathieu Larouche [Fri, 21 Aug 2015 13:24:13 +0000 (09:24 -0400)]
drm/mgag200: Add support for a new rev of G200e
- Added PLL algorithm for a new rev of G200e
- Removed the bandwidth limitation for the new G200e
Signed-off-by: Mathieu Larouche <mathieu.larouche@matrox.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Mathieu Larouche [Fri, 21 Aug 2015 13:24:05 +0000 (09:24 -0400)]
drm/mgag200: Add support for a new G200eW3 chipset
- Added support for the new deviceID for G200eW3
- Added PLL algorithm for the G200eW3
- Added some initialization code for G200eW3
Signed-off-by: Mathieu Larouche <mathieu.larouche@matrox.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Linus Torvalds [Mon, 24 Aug 2015 03:46:22 +0000 (20:46 -0700)]
Merge tag 'scsi-fixes' of git://git./linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"A couple of major (hang and deadlock) fixes with fortunately fairly
rare triggering conditions. The PM oops is only really triggered by
people using enclosure services (rare) and the fnic driver is mostly
used in enterprise environments"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
SCSI: Fix NULL pointer dereference in runtime PM
fnic: Use the local variable instead of I/O flag to acquire io_req_lock in fnic_queuecommand() to avoid deadloack
Linus Torvalds [Sun, 23 Aug 2015 14:23:09 +0000 (07:23 -0700)]
Merge branch 'upstream' of git://git.linux-mips.org/ralf/upstream-linus
Pull MIPS bug fixes from Ralf Baechle:
"Two more fixes for 4.2.
One fixes a build issue with the LLVM assembler - LLVM assembler macro
names are case sensitive, GNU as macro names are insensitive; the
other corrects a license string (GPL v2, not GPLv2) such that the
module loader will recognice the license correctly"
* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus:
FIRMWARE: bcm47xx_nvram: Fix module license.
MIPS: Fix LLVM build issue.
Linus Torvalds [Sun, 23 Aug 2015 03:22:11 +0000 (20:22 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/viro/vfs
Pull 9p regression fix from Al Viro:
"Fix for breakage introduced when switching p9_client_{read,write}() to
struct iov_iter * (went into 4.1)"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
9p: ensure err is initialized to 0 in p9_client_read/write
Vincent Bernat [Sat, 15 Aug 2015 13:49:13 +0000 (15:49 +0200)]
9p: ensure err is initialized to 0 in p9_client_read/write
Some use of those functions were providing unitialized values to those
functions. Notably, when reading 0 bytes from an empty file on a 9P
filesystem, the return code of read() was not 0.
Tested with this simple program:
#include <assert.h>
#include <sys/types.h>
#include <sys/stat.h>
#include <fcntl.h>
#include <unistd.h>
int main(int argc, const char **argv)
{
assert(argc == 2);
char buffer[256];
int fd = open(argv[1], O_RDONLY|O_NOCTTY);
assert(fd >= 0);
assert(read(fd, buffer, 0) == 0);
return 0;
}
Cc: stable@vger.kernel.org # v4.1
Signed-off-by: Vincent Bernat <vincent@bernat.im>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Linus Torvalds [Sat, 22 Aug 2015 22:48:04 +0000 (15:48 -0700)]
Merge branch 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm
Pull ARM fixes from Russell King:
"Another couple of small ARM fixes.
A patch from Masahiro Yamada who noticed that "make -jN all zImage"
would end up generating bad images where N > 1, and a patch from
Nicolas to fix the Marvell CPU user access optimisation code when page
faults are disabled"
* 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm:
ARM: 8418/1: add boot image dependencies to not generate invalid images
ARM: 8414/1: __copy_to_user_memcpy: fix mmap semaphore usage
Linus Torvalds [Sat, 22 Aug 2015 15:15:36 +0000 (08:15 -0700)]
Merge branch 'x86-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
"Various low level fixes: fix more fallout from the FPU rework and the
asm entry code rework, plus an MSI rework fix, and an idle-tracing fix"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/fpu/math-emu: Fix crash in fork()
x86/fpu/math-emu: Fix math-emu boot crash
x86/idle: Restore trace_cpu_idle to mwait_idle() calls
x86/irq: Build correct vector mapping for multiple MSI interrupts
Revert "sched/x86_64: Don't save flags on context switch"
Linus Torvalds [Sat, 22 Aug 2015 15:06:28 +0000 (08:06 -0700)]
Merge branch 'perf-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull perf fixes from Ingo Molnar:
"Tooling fixes: a 'perf record' deadlock fix plus debuggability fixes"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf top: Show backtrace when handling a SIGSEGV on --stdio mode
perf tools: Fix buildid processing
perf tools: Make fork event processing more resilient
perf tools: Avoid deadlock when map_groups are broken
Linus Torvalds [Sat, 22 Aug 2015 14:45:36 +0000 (07:45 -0700)]
Merge branch 'irq-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull irq fixes from Thomas Gleixner:
"A series of small fixlets for a regression visible on OMAP devices
caused by the conversion of the OMAP interrupt chips to hierarchical
interrupt domains. Mostly one liners on the driver side plus a small
helper function in the core to avoid open coded mess in the drivers"
* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/crossbar: Restore set_wake functionality
irqchip/crossbar: Restore the mask on suspend behaviour
ARM: OMAP: wakeupgen: Restore the irq_set_type() mechanism
irqchip/crossbar: Restore the irq_set_type() mechanism
genirq: Introduce irq_chip_set_type_parent() helper
genirq: Don't return ENOSYS in irq_chip_retrigger_hierarchy
Linus Torvalds [Sat, 22 Aug 2015 14:37:41 +0000 (07:37 -0700)]
Merge branch 'timers-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull timer fixes from Thomas Gleixner:
"Two minimalistic fixes for 4.2 regressions:
- Eric fixed a thinko in the timer_list base switching code caused by
the overhaul of the timer wheel. It can cause a cpu to see the
wrong base for a timer while we move the timer around.
- Guenter fixed a regression for IMX if booted w/o device tree, where
the timer interrupt is not initialized and therefor the machine
fails to boot"
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
clocksource/imx: Fix boot with non-DT systems
timer: Write timer->flags atomically
Ingo Molnar [Wed, 27 May 2015 10:22:29 +0000 (12:22 +0200)]
x86/fpu/math-emu: Fix crash in fork()
During later stages of math-emu bootup the following crash triggers:
math_emulate: 0060:
c100d0a8
Kernel panic - not syncing: Math emulation needed in kernel
CPU: 0 PID: 1511 Comm: login Not tainted 4.2.0-rc7+ #1012
[...]
Call Trace:
[<
c181d50d>] dump_stack+0x41/0x52
[<
c181c918>] panic+0x77/0x189
[<
c1003530>] ? math_error+0x140/0x140
[<
c164c2d7>] math_emulate+0xba7/0xbd0
[<
c100d0a8>] ? fpu__copy+0x138/0x1c0
[<
c1109c3c>] ? __alloc_pages_nodemask+0x12c/0x870
[<
c136ac20>] ? proc_clear_tty+0x40/0x70
[<
c136ac6e>] ? session_clear_tty+0x1e/0x30
[<
c1003530>] ? math_error+0x140/0x140
[<
c1003575>] do_device_not_available+0x45/0x70
[<
c100d0a8>] ? fpu__copy+0x138/0x1c0
[<
c18258e6>] error_code+0x5a/0x60
[<
c1003530>] ? math_error+0x140/0x140
[<
c100d0a8>] ? fpu__copy+0x138/0x1c0
[<
c100c205>] arch_dup_task_struct+0x25/0x30
[<
c1048cea>] copy_process.part.51+0xea/0x1480
[<
c115a8e5>] ? dput+0x175/0x200
[<
c136af70>] ? no_tty+0x30/0x30
[<
c1157242>] ? do_vfs_ioctl+0x322/0x540
[<
c104a21a>] _do_fork+0xca/0x340
[<
c1057b06>] ? SyS_rt_sigaction+0x66/0x90
[<
c104a557>] SyS_clone+0x27/0x30
[<
c1824a80>] sysenter_do_call+0x12/0x12
The reason is the incorrect assumption in fpu_copy(), that FNSAVE
can be executed from math-emu kernels as well.
Don't try to copy the registers, the soft state will be copied
by fork anyway, so the child task inherits the parent task's
soft math state.
With this fix applied math-emu kernels boot up fine on modern
hardware and the 'no387 nofxsr' boot options.
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Bobby Powers <bobbypowers@gmail.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Quentin Casasnovas <quentin.casasnovas@oracle.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Ingo Molnar [Sat, 22 Aug 2015 07:52:06 +0000 (09:52 +0200)]
x86/fpu/math-emu: Fix math-emu boot crash
On a math-emu bootup the following crash occurs:
Initializing CPU#0
------------[ cut here ]------------
kernel BUG at arch/x86/kernel/traps.c:779!
invalid opcode: 0000 [#1] SMP
[...]
EIP is at do_device_not_available+0xe/0x70
[...]
Call Trace:
[<
c18238e6>] error_code+0x5a/0x60
[<
c1002bd0>] ? math_error+0x140/0x140
[<
c100bbd9>] ? fpu__init_cpu+0x59/0xa0
[<
c1012322>] cpu_init+0x202/0x330
[<
c104509f>] ? __native_set_fixmap+0x1f/0x30
[<
c1b56ab0>] trap_init+0x305/0x346
[<
c1b548af>] start_kernel+0x1a5/0x35d
[<
c1b542b4>] i386_start_kernel+0x82/0x86
The reason is that in the following commit:
b1276c48e91b ("x86/fpu: Initialize fpregs in fpu__init_cpu_generic()")
I failed to consider math-emu's limitation that it cannot execute the
FNINIT instruction in kernel mode.
The long term fix might be to allow math-emu to execute (certain) kernel
mode FPU instructions, but for now apply the safe (albeit somewhat ugly)
fix: initialize the emulation state explicitly without trapping out to
the FPU emulator.
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Quentin Casasnovas <quentin.casasnovas@oracle.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Alex Deucher [Fri, 21 Aug 2015 22:07:38 +0000 (18:07 -0400)]
drm/amdgpu: Don't link train DisplayPort on HPD until we get the dpcd
This is a port of:
DRM - radeon: Don't link train DisplayPort on HPD until we get the dpcd
to amdgpu.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Stephen Chandler Paul [Fri, 21 Aug 2015 18:16:12 +0000 (14:16 -0400)]
DRM - radeon: Don't link train DisplayPort on HPD until we get the dpcd
Most of the time this isn't an issue since hotplugging an adaptor will
trigger a crtc mode change which in turn, causes the driver to probe
every DisplayPort for a dpcd. However, in cases where hotplugging
doesn't cause a mode change (specifically when one unplugs a monitor
from a DisplayPort connector, then plugs that same monitor back in
seconds later on the same port without any other monitors connected), we
never probe for the dpcd before starting the initial link training. What
happens from there looks like this:
- GPU has only one monitor connected. It's connected via
DisplayPort, and does not go through an adaptor of any sort.
- User unplugs DisplayPort connector from GPU.
- Change in HPD is detected by the driver, we probe every
DisplayPort for a possible connection.
- Probe the port the user originally had the monitor connected
on for it's dpcd. This fails, and we clear the first (and only
the first) byte of the dpcd to indicate we no longer have a
dpcd for this port.
- User plugs the previously disconnected monitor back into the
same DisplayPort.
- radeon_connector_hotplug() is called before everyone else,
and tries to handle the link training. Since only the first
byte of the dpcd is zeroed, the driver is able to complete
link training but does so against the wrong dpcd, causing it
to initialize the link with the wrong settings.
- Display stays blank (usually), dpcd is probed after the
initial link training, and the driver prints no obvious
messages to the log.
In theory, since only one byte of the dpcd is chopped off (specifically,
the byte that contains the revision information for DisplayPort), it's
not entirely impossible that this bug may not show on certain monitors.
For instance, the only reason this bug was visible on my ASUS PB238
monitor was due to the fact that this monitor using the enhanced framing
symbol sequence, the flag for which is ignored if the radeon driver
thinks that the DisplayPort version is below 1.1.
Signed-off-by: Stephen Chandler Paul <cpaul@redhat.com>
Reviewed-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Christoph Hellwig [Fri, 21 Aug 2015 21:11:54 +0000 (14:11 -0700)]
Add hch to .get_maintainer.ignore
While the idea behind get_maintainer seems highly useful it's
unfortunately way to trigger happy to grab people that once had a few
commits to files. For someone like me who does a lot of tree-wide API
work that leads to an incredible amount of Cc spam.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Michal Hocko [Fri, 21 Aug 2015 21:11:51 +0000 (14:11 -0700)]
mm: make page pfmemalloc check more robust
Commit
c48a11c7ad26 ("netvm: propagate page->pfmemalloc to skb") added
checks for page->pfmemalloc to __skb_fill_page_desc():
if (page->pfmemalloc && !page->mapping)
skb->pfmemalloc = true;
It assumes page->mapping == NULL implies that page->pfmemalloc can be
trusted. However, __delete_from_page_cache() can set set page->mapping
to NULL and leave page->index value alone. Due to being in union, a
non-zero page->index will be interpreted as true page->pfmemalloc.
So the assumption is invalid if the networking code can see such a page.
And it seems it can. We have encountered this with a NFS over loopback
setup when such a page is attached to a new skbuf. There is no copying
going on in this case so the page confuses __skb_fill_page_desc which
interprets the index as pfmemalloc flag and the network stack drops
packets that have been allocated using the reserves unless they are to
be queued on sockets handling the swapping which is the case here and
that leads to hangs when the nfs client waits for a response from the
server which has been dropped and thus never arrive.
The struct page is already heavily packed so rather than finding another
hole to put it in, let's do a trick instead. We can reuse the index
again but define it to an impossible value (-1UL). This is the page
index so it should never see the value that large. Replace all direct
users of page->pfmemalloc by page_is_pfmemalloc which will hide this
nastiness from unspoiled eyes.
The information will get lost if somebody wants to use page->index
obviously but that was the case before and the original code expected
that the information should be persisted somewhere else if that is
really needed (e.g. what SLAB and SLUB do).
[akpm@linux-foundation.org: fix blooper in slub]
Fixes:
c48a11c7ad26 ("netvm: propagate page->pfmemalloc to skb")
Signed-off-by: Michal Hocko <mhocko@suse.com>
Debugged-by: Vlastimil Babka <vbabka@suse.com>
Debugged-by: Jiri Bohac <jbohac@suse.com>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: David Miller <davem@davemloft.net>
Acked-by: Mel Gorman <mgorman@suse.de>
Cc: <stable@vger.kernel.org> [3.6+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Fri, 21 Aug 2015 18:18:10 +0000 (11:18 -0700)]
Merge tag 'pci-v4.2-fixes-2' of git://git./linux/kernel/git/helgaas/pci
Pull PCI fixes from Bjorn Helgaas:
"These are fixes for ASPM-related NULL pointer dereference crashes on
Sparc and PowerPC and 64-bit PCI address-related HPMC crashes on
PA-RISC. These are both caused by things we merged in the v4.2 merge
window. Details:
Resource management
- Don't use 64-bit bus addresses on PA-RISC
Miscellaneous
- Tolerate hierarchies with no Root Port"
* tag 'pci-v4.2-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
PCI: Don't use 64-bit bus addresses on PA-RISC
PCI: Tolerate hierarchies with no Root Port
Linus Torvalds [Fri, 21 Aug 2015 18:03:06 +0000 (11:03 -0700)]
Merge tag 'media/v4.2-3' of git://git./linux/kernel/git/mchehab/linux-media
Pull media fixes from Mauro Carvalho Chehab:
- a regression fix at the videobuf2 core driver
- fix error handling at mantis probing code
- revert the IR encode patches, as the API is not mature enough.
So, better to postpone the changes to a latter Kernel
- fix Kconfig breakages on some randconfig scenarios.
* tag 'media/v4.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
[media] mantis: Fix error handling in mantis_dma_init()
Revert "[media] rc: rc-ir-raw: Add scancode encoder callback"
Revert "[media] rc: rc-ir-raw: Add Manchester encoder (phase encoder) helper"
Revert "[media] rc: ir-rc5-decoder: Add encode capability"
Revert "[media] rc: ir-rc6-decoder: Add encode capability"
Revert "[media] rc: rc-core: Add support for encode_wakeup drivers"
Revert "[media] rc: rc-loopback: Add loopback of filter scancodes"
Revert "[media] rc: nuvoton-cir: Add support for writing wakeup samples via sysfs filter callback"
[media] vb2: Fix compilation breakage when !CONFIG_BUG
[media] vb2: Only requeue buffers immediately once streaming is started
[media] media/pci/cobalt: fix Kconfig and build when SND is not enabled
[media] media/dvb: fix ts2020.c Kconfig and build
Linus Torvalds [Fri, 21 Aug 2015 17:54:53 +0000 (10:54 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/dtor/input
Pull input layer fix from Dmitry Torokhov:
"A small fixup to gpio_keys_polled driver"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: gpio_keys_polled - request GPIO pin as input.
Linus Torvalds [Fri, 21 Aug 2015 17:46:56 +0000 (10:46 -0700)]
Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux
Pull drm fixes from Dave Airlie:
"A bunch of i915 fixes, one revert a VBT fix that was a bit premature,
and some braswell feature removal that the hw actually didn't support.
One radeon race fix at boot, and one hlcdc build fix, one fix from
Russell that fixes build as well with new audio features.
This is hopefully all I have until -next"
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
drm/radeon: fix hotplug race at startup
drm/edid: add function to help find SADs
drm/i915: Avoid TP3 on CHV
drm/i915: remove HBR2 from chv supported list
Revert "drm/i915: Add eDP intermediate frequencies for CHV"
Revert "drm/i915: Allow parsing of variable size child device entries from VBT"
drm/atmel-hlcdc: Compile suspend/resume for PM_SLEEP only
drm/i915: Flag the execlists context object as dirty after every use
Dave Airlie [Thu, 20 Aug 2015 00:13:55 +0000 (10:13 +1000)]
drm/radeon: fix hotplug race at startup
We apparantly get a hotplug irq before we've initialised
modesetting,
[drm] Loading R100 Microcode
BUG: unable to handle kernel NULL pointer dereference at (null)
IP: [<
c125f56f>] __mutex_lock_slowpath+0x23/0x91
*pde =
00000000
Oops: 0002 [#1]
Modules linked in: radeon(+) drm_kms_helper ttm drm i2c_algo_bit backlight pcspkr psmouse evdev sr_mod input_leds led_class cdrom sg parport_pc parport floppy intel_agp intel_gtt lpc_ich acpi_cpufreq processor button mfd_core agpgart uhci_hcd ehci_hcd rng_core snd_intel8x0 snd_ac97_codec ac97_bus snd_pcm usbcore usb_common i2c_i801 i2c_core snd_timer snd soundcore thermal_sys
CPU: 0 PID: 15 Comm: kworker/0:1 Not tainted
4.2.0-rc7-00015-gbf67402 #111
Hardware name: MicroLink /D850MV , BIOS MV85010A.86A.0067.P24.
0304081124 04/08/2003
Workqueue: events radeon_hotplug_work_func [radeon]
task:
f6ca5900 ti:
f6d3e000 task.ti:
f6d3e000
EIP: 0060:[<
c125f56f>] EFLAGS:
00010282 CPU: 0
EIP is at __mutex_lock_slowpath+0x23/0x91
EAX:
00000000 EBX:
f5e900fc ECX:
00000000 EDX:
fffffffe
ESI:
f6ca5900 EDI:
f5e90100 EBP:
f5e90000 ESP:
f6d3ff0c
DS: 007b ES: 007b FS: 0000 GS: 0000 SS: 0068
CR0:
8005003b CR2:
00000000 CR3:
36f61000 CR4:
000006d0
Stack:
f5e90100 00000000 c103c4c1 f6d2a5a0 f5e900fc f6df394c c125f162 f8b0faca
f6d2a5a0 c138ca00 f6df394c f7395600 c1034741 00d40000 00000000 f6d2a5a0
c138ca00 f6d2a5b8 c138ca10 c1034b58 00000001 f6d40000 f6ca5900 f6d0c940
Call Trace:
[<
c103c4c1>] ? dequeue_task_fair+0xa4/0xb7
[<
c125f162>] ? mutex_lock+0x9/0xa
[<
f8b0faca>] ? radeon_hotplug_work_func+0x17/0x57 [radeon]
[<
c1034741>] ? process_one_work+0xfc/0x194
[<
c1034b58>] ? worker_thread+0x18d/0x218
[<
c10349cb>] ? rescuer_thread+0x1d5/0x1d5
[<
c103742a>] ? kthread+0x7b/0x80
[<
c12601c0>] ? ret_from_kernel_thread+0x20/0x30
[<
c10373af>] ? init_completion+0x18/0x18
Code: 42 08 e8 8e a6 dd ff c3 57 56 53 83 ec 0c 8b 35 48 f7 37 c1 8b 10 4a 74 1a 89 c3 8d 78 04 8b 40 08 89 63
Reported-and-Tested-by: Meelis Roos <mroos@linux.ee>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Thomas Hellstrom [Wed, 19 Aug 2015 10:19:47 +0000 (03:19 -0700)]
drm/vmwgfx: Remove duplicate ttm_bo_device_release
No need to try to call ttm_bo_device_release twice during module unload.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
Thomas Hellstrom [Tue, 18 Aug 2015 16:07:38 +0000 (09:07 -0700)]
drm/vmwgfx: Fix a circular locking dependency in the fbdev code
When a user-space process writes directly to the fbdev framebuffer,
we hit a circular locking dependency. Fix this by introducing a local
delayed work callback so that the defio lock can be released before
calling into the modesetting code for a dirty update.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
Dave Airlie [Tue, 14 Jul 2015 01:33:31 +0000 (11:33 +1000)]
drm/dp/mst: dump branch OUI in debugfs (v2)
It appears some MST docks are worse than other, but the only
way to know is to see the sw revisions in here, so dump
the branch OUI so we can look at the sw revision.
v2: Thierry made me feel guilty, so I parsed the branch
OUI.
Reviewed-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Dave Airlie [Fri, 21 Aug 2015 00:44:03 +0000 (10:44 +1000)]
Merge tag 'drm-intel-fixes-2015-08-20' of git://anongit.freedesktop.org/drm-intel into drm-fixes
Revert of a VBT parsing commit that should've been queued for drm-next,
not v4.2. The revert unbreaks Braswell among other things.
Also on Braswell removal of DP HBR2/TP3 and intermediate eDP frequency
support. The code was optimistically added based on incorrect
documentation; the platform does not support them. These are cc: stable.
Finally a gpu state fix from Chris, also cc: stable.
* tag 'drm-intel-fixes-2015-08-20' of git://anongit.freedesktop.org/drm-intel:
drm/i915: Avoid TP3 on CHV
drm/i915: remove HBR2 from chv supported list
Revert "drm/i915: Add eDP intermediate frequencies for CHV"
Revert "drm/i915: Allow parsing of variable size child device entries from VBT"
drm/i915: Flag the execlists context object as dirty after every use
Linus Torvalds [Fri, 21 Aug 2015 00:06:11 +0000 (17:06 -0700)]
Merge tag 'pm+acpi-4.2-rc8' of git://git./linux/kernel/git/rafael/linux-pm
Pull power management and ACPI fixes from Rafael Wysocki:
"These fix a recent regression in the ACPI backlight code and a memory
leak in the Exynos cpufreq driver.
Specifics:
- Fix a recently introduced issue in the ACPI backlight code which
causes lockdep to complain about a circular lock dependency during
initialization (Hans de Goede).
- Fix a possible memory during initialization in the Exynos cpufreq
driver (Shailendra Verma)"
* tag 'pm+acpi-4.2-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: exynos: Fix for memory leak in case SoC name does not match
ACPI / video: Fix circular lock dependency issue in the video-detect code
Rafael J. Wysocki [Thu, 20 Aug 2015 22:19:29 +0000 (00:19 +0200)]
Merge branches 'acpi-video' and 'cpufreq-fixes'
* acpi-video:
ACPI / video: Fix circular lock dependency issue in the video-detect code
* cpufreq-fixes:
cpufreq: exynos: Fix for memory leak in case SoC name does not match
Bjorn Helgaas [Thu, 20 Aug 2015 05:08:15 +0000 (00:08 -0500)]
PCI: Don't use 64-bit bus addresses on PA-RISC
Meelis and Helge reported that
3a9ad0b4fdcd ("PCI: Add pci_bus_addr_t")
caused HPMCs on A500 and hangs on rp5470.
PA-RISC does not set ARCH_DMA_ADDR_T_64BIT, even for 64-bit kernels, so
prior to
3a9ad0b4fdcd, we always used 32-bit PCI addresses. After
3a9ad0b4fdcd, we do use 64-bit PCI addresses in 64-bit kernels, and
apparently there's some PA-RISC problem related to them.
Fixes:
3a9ad0b4fdcd ("PCI: Add pci_bus_addr_t")
Link: http://lkml.kernel.org/r/alpine.LRH.2.11.1507260929000.30065@math.ut.ee
Reported-by: Meelis Roos <mroos@linux.ee>
Reported-by: Helge Deller <deller@gmx.de>
Tested-by: Helge Deller <deller@gmx.de>
Based-on-idea-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Yinghai Lu <yinghai@kernel.org>
CC: stable@vger.kernel.org # v3.19+
Christian König [Tue, 18 Aug 2015 19:09:33 +0000 (21:09 +0200)]
drm/amdgpu: fix CS error handling v2
Stop double freeing the the BO list by pulling the content
of amdgpu_cs_parser_prepare_job() into the IOCTL function again.
v2: better commit message
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com> (v1)
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Tue, 18 Aug 2015 16:23:16 +0000 (18:23 +0200)]
drm/amdgpu: fix zeroing all IB fields manually v2
The problem now is that we don't necessarily call amdgpu_ib_get()
in some error paths and so work with uninitialized data.
Better require that the memory is already zeroed.
v2: better commit message
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com> (v1)
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Tue, 18 Aug 2015 13:30:26 +0000 (15:30 +0200)]
drm/amdgpu: free the job immediately after dispatching it
Fixes a whole bunch of lockdep warnings.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Christian König [Tue, 18 Aug 2015 12:41:25 +0000 (14:41 +0200)]
drm/amdgpu: use a spinlock instead of a mutex for the rq
More appropriate and fixes some nasty lockdep warnings.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Chunming Zhou [Tue, 18 Aug 2015 08:25:46 +0000 (16:25 +0800)]
drm/amdgpu: don't need to use bo_list_clone any more
Signed-off-by: Chunming Zhou <david1.zhou@amd.com>
Reviewed-by: Christian K?nig <christian.koenig@amd.com>
Chunming Zhou [Tue, 18 Aug 2015 08:19:13 +0000 (16:19 +0800)]
drm/amdgpu: some clean up for cs_ioctl
Signed-off-by: Chunming Zhou <david1.zhou@amd.com>
Reviewed-by: Christian K?nig <christian.koenig@amd.com>
Chunming Zhou [Tue, 18 Aug 2015 08:12:15 +0000 (16:12 +0800)]
drm/amdgpu: prepare job should be common code path
Signed-off-by: Chunming Zhou <david1.zhou@amd.com>
Reviewed-by: Christian K?nig <christian.koenig@amd.com>
Chunming Zhou [Tue, 18 Aug 2015 07:16:40 +0000 (15:16 +0800)]
drm/amdgpu: abstract amdgpu_job for scheduler
Signed-off-by: Chunming Zhou <david1.zhou@amd.com>
Reviewed-by: Christian K?nig <christian.koenig@amd.com>
Marek Olšák [Tue, 18 Aug 2015 21:58:47 +0000 (23:58 +0200)]
drm/amdgpu: bump the DRM version for new allowed mem-mapped registers
Used by mesa, etc. for profiling.
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Jisheng Zhang [Thu, 20 Aug 2015 04:54:39 +0000 (12:54 +0800)]
x86/idle: Restore trace_cpu_idle to mwait_idle() calls
Commit
b253149b843f ("sched/idle/x86: Restore mwait_idle() to fix boot
hangs, to improve power savings and to improve performance") restores
mwait_idle(), but the trace_cpu_idle related calls are missing. This
causes powertop on my old desktop powered by Intel Core2 E6550 to
report zero wakeups and zero events.
Add them back to restore the proper behaviour.
Fixes:
b253149b843f ("sched/idle/x86: Restore mwait_idle() to ...")
Signed-off-by: Jisheng Zhang <jszhang@marvell.com>
Cc: <len.brown@intel.com>
Cc: stable@vger.kernel.org # 4.1
Link: http://lkml.kernel.org/r/1440046479-4262-1-git-send-email-jszhang@marvell.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Linus Torvalds [Thu, 20 Aug 2015 19:32:28 +0000 (12:32 -0700)]
Merge git://git./linux/kernel/git/davem/net
Pull networking fixes from David Miller:
1) Out of bounds array access in 802.11 minstrel code, from Adrien
Schildknecht.
2) Don't use skb_get() in IGMP/MLD code paths, as this makes
pskb_may_pull() BUG. From Linus Luessing.
3) Fix off by one in ipv4 route dumping code, from Andy Whitcroft.
4) Fix deadlock in reqsk_queue_unlink(), from Eric Dumazet.
5) Fix ppp device deregistration wrt. netns deletion, from Guillaume
Nault.
6) Fix deadlock when creating per-cpu ipv6 routes, from Martin KaFai
Lau.
7) Fix memory leak in batman-adv code, from Sven Eckelmann.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
batman-adv: Fix memory leak on tt add with invalid vlan
net: phy: fix semicolon.cocci warnings
net: qmi_wwan: add HP lt4111 LTE/EV-DO/HSPA+ Gobi 4G Module
be2net: avoid vxlan offloading on multichannel configs
ipv6: Fix a potential deadlock when creating pcpu rt
ipv6: Add rt6_make_pcpu_route()
ipv6: Remove un-used argument from ip6_dst_alloc()
net: phy: workaround for buggy cable detection by LAN8700 after cable plugging
net: ethernet: micrel: fix an error code
ppp: fix device unregistration upon netns deletion
net: phy: fix PHY_RUNNING in phy_state_machine
Revert "net: limit tcp/udp rmem/wmem to SOCK_{RCV,SND}BUF_MIN"
inet: fix potential deadlock in reqsk_queue_unlink()
gianfar: Restore link state settings after MAC reset
ipv4: off-by-one in continuation handling in /proc/net/route
net: fix wrong skb_get() usage / crash in IGMP/MLD parsing code
mac80211: fix invalid read in minstrel_sort_best_tp_rates()
Linus Torvalds [Thu, 20 Aug 2015 19:21:26 +0000 (12:21 -0700)]
Merge tag 'for-linus-4.2-rc7-tag' of git://git./linux/kernel/git/xen/tip
Pull xen build fix from David Vrabel:
"Fix i386 build with an (uncommon) configuration"
* tag 'for-linus-4.2-rc7-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
x86/xen: make CONFIG_XEN depend on CONFIG_X86_LOCAL_APIC
Linus Torvalds [Thu, 20 Aug 2015 19:08:38 +0000 (12:08 -0700)]
Merge tag 'sound-4.2' of git://git./linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Here are a small collecton of sound fix patches.
The most significant one is the disablement of newly introduced
topology API. Its ABI couldn't be stabilized enough, so we decided to
delay for 4.3 in the end. Other than that, all oneliner fixes: a
USB-audio runtime PM fix and a couple of HD-audio quirks"
* tag 'sound-4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda - Add dock support for Thinkpad W541 (17aa:2211)
ALSA: usb-audio: Fix runtime PM unbalance
ASoC: topology: Disable use from userspace
ASoC: topology: Add Kconfig option for topology
ALSA: hda - Fix the white noise on Dell laptop
projects / GitHub / moto-9609 / android_kernel_motorola_exynos9610.git / log