GitHub/exynos8895/android_kernel_samsung_universal8895.git
10 years agoaudit: remove pr_info for every network namespace
Eric Paris [Fri, 17 Jan 2014 22:04:38 +0000 (17:04 -0500)]
audit: remove pr_info for every network namespace

A message about creating the audit socket might be fine at startup, but
a pr_info for every single network namespace created on a system isn't
useful.

Signed-off-by: Eric Paris <eparis@redhat.com>
10 years agoaudit: Modify a set of system calls in audit class definitions
AKASHI Takahiro [Fri, 17 Jan 2014 08:05:03 +0000 (17:05 +0900)]
audit: Modify a set of system calls in audit class definitions

Each asm-generic/audit_xx.h defines a set of system calls for respective
audit permission class (read, write, change attribute or exec).
This patch changes two entries:

1) fchown in audit_change_attr.h
  Make fchown included by its own because in asm-generic/unistd.h, for example,
  fchown always exists while chown is optional. This change is necessary at
  least for arm64.

2) truncate64 in audit_write.h
  Add missing truncate64/ftruncate64 as well as truncate/ftruncate

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
10 years agoaudit: Convert int limit uses to u32
Joe Perches [Tue, 14 Jan 2014 18:33:13 +0000 (10:33 -0800)]
audit: Convert int limit uses to u32

The equivalent uapi struct uses __u32 so make the kernel
uses u32 too.

This can prevent some oddities where the limit is
logged/emitted as a negative value.

Convert kstrtol to kstrtouint to disallow negative values.

Signed-off-by: Joe Perches <joe@perches.com>
[eparis: do not remove static from audit_default declaration]

10 years agoaudit: Use more current logging style
Joe Perches [Tue, 14 Jan 2014 18:33:12 +0000 (10:33 -0800)]
audit: Use more current logging style

Add pr_fmt to prefix "audit: " to output
Convert printk(KERN_<LEVEL> to pr_<level>
Coalesce formats
Use pr_cont
Move a brace after switch

Signed-off-by: Joe Perches <joe@perches.com>
10 years agoaudit: Use hex_byte_pack_upper
Joe Perches [Tue, 14 Jan 2014 07:31:27 +0000 (23:31 -0800)]
audit: Use hex_byte_pack_upper

Using the generic kernel function causes the
object size to increase with gcc 4.8.1.

$ size kernel/audit.o*
   text    data     bss     dec     hex filename
  18577    6079    8436   33092    8144 kernel/audit.o.new
  18579    6015    8420   33014    80f6 kernel/audit.o.old

Unsigned...

10 years agoaudit: correct a type mismatch in audit_syscall_exit()
AKASHI Takahiro [Mon, 13 Jan 2014 21:33:09 +0000 (13:33 -0800)]
audit: correct a type mismatch in audit_syscall_exit()

audit_syscall_exit() saves a result of regs_return_value() in intermediate
"int" variable and passes it to __audit_syscall_exit(), which expects its
second argument as a "long" value.  This will result in truncating the
value returned by a system call and making a wrong audit record.

I don't know why gcc compiler doesn't complain about this, but anyway it
causes a problem at runtime on arm64 (and probably most 64-bit archs).

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Eric Paris <eparis@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Eric Paris <eparis@redhat.com>
10 years agoaudit: reorder AUDIT_TTY_SET arguments
Eric Paris [Tue, 14 Jan 2014 02:16:59 +0000 (21:16 -0500)]
audit: reorder AUDIT_TTY_SET arguments

An admin is likely to want to see old and new values next to each other.
Putting all of the old values followed by all of the new values is just
hard to read as a human.

Signed-off-by: Eric Paris <eparis@redhat.com>
10 years agoaudit: rework AUDIT_TTY_SET to only grab spin_lock once
Eric Paris [Tue, 14 Jan 2014 02:12:34 +0000 (21:12 -0500)]
audit: rework AUDIT_TTY_SET to only grab spin_lock once

We can simplify the AUDIT_TTY_SET code to only grab the spin_lock one
time.  We need to determine if the new values are valid and if so, set
the new values at the same time we grab the old onces.  While we are
here get rid of 'res' and just use err.

Signed-off-by: Eric Paris <eparis@redhat.com>
10 years agoaudit: remove needless switch in AUDIT_SET
Eric Paris [Mon, 13 Jan 2014 21:49:28 +0000 (16:49 -0500)]
audit: remove needless switch in AUDIT_SET

If userspace specified that it was setting values via the mask we do not
need a second check to see if they also set the version field high
enough to understand those values.  (clearly if they set the mask they
knew those values).

Signed-off-by: Eric Paris <eparis@redhat.com>
10 years agoaudit: use define's for audit version
Eric Paris [Mon, 13 Jan 2014 21:48:45 +0000 (16:48 -0500)]
audit: use define's for audit version

Give names to the audit versions.  Just something for a userspace
programmer to know what the version provides.

Signed-off-by: Eric Paris <eparis@redhat.com>
10 years agoaudit: documentation of audit= kernel parameter
Eric Paris [Mon, 13 Jan 2014 21:01:06 +0000 (16:01 -0500)]
audit: documentation of audit= kernel parameter

Further documentation of the 3 possible kernel value of the audit
command line option.

Signed-off-by: Eric Paris <eparis@redhat.com>
10 years agoaudit: wait_for_auditd rework for readability
Eric Paris [Mon, 13 Jan 2014 20:42:16 +0000 (15:42 -0500)]
audit: wait_for_auditd rework for readability

We had some craziness with signed to unsigned long casting which appears
wholely unnecessary.  Just use signed long.  Even though 2 values of the
math equation are unsigned longs the result is expected to be a signed
long.  So why keep casting the result to signed long?  Just make it
signed long and use it.

We also remove the needless "timeout" variable.  We already have the
stack "sleep_time" variable.  Just use that...

Signed-off-by: Eric Paris <eparis@redhat.com>
10 years agoaudit: update MAINTAINERS
Richard Guy Briggs [Mon, 23 Dec 2013 21:56:43 +0000 (16:56 -0500)]
audit: update MAINTAINERS

Al's tree is stale and no longer updated.  Al is no longer active in maitaining
audit.  Eric's tree is authoritative.

Signed-off-by: Eric Paris <eparis@redhat.com>
10 years agoaudit: log task info on feature change
Richard Guy Briggs [Tue, 7 Jan 2014 18:08:41 +0000 (13:08 -0500)]
audit: log task info on feature change

Add task information to the log when changing a feature state.

Signed-off-by: Eric Paris <eparis@redhat.com>
10 years agoaudit: fix incorrect set of audit_sock
Gao feng [Tue, 17 Dec 2013 03:10:42 +0000 (11:10 +0800)]
audit: fix incorrect set of audit_sock

NETLINK_CB(skb).sk is the socket of user space process,
netlink_unicast in kauditd_send_skb wants the kernel
side socket. Since the sk_state of audit netlink socket
is not NETLINK_CONNECTED, so the netlink_getsockbyportid
doesn't return -ECONNREFUSED.

And the socket of userspace process can be released anytime,
so the audit_sock may point to invalid socket.

this patch sets the audit_sock to the kernel side audit
netlink socket.

Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
Acked-by: Eric Paris <eparis@redhat.com>
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
10 years agoaudit: print error message when fail to create audit socket
Gao feng [Tue, 17 Dec 2013 03:10:41 +0000 (11:10 +0800)]
audit: print error message when fail to create audit socket

print the error message and then return -ENOMEM.

Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
Acked-by: Eric Paris <eparis@redhat.com>
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
10 years agoaudit: fix dangling keywords in audit_log_set_loginuid() output
Richard Guy Briggs [Wed, 11 Dec 2013 20:28:09 +0000 (15:28 -0500)]
audit: fix dangling keywords in audit_log_set_loginuid() output

Remove spaces between "new", "old" label modifiers and "auid", "ses" labels in
log output since userspace tools can't parse orphaned keywords.

Make variable names more consistent and intuitive.

Make audit_log_format() argument code easier to read.

Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
10 years agoaudit: log on errors from filter user rules
Richard Guy Briggs [Tue, 26 Nov 2013 02:57:51 +0000 (21:57 -0500)]
audit: log on errors from filter user rules

An error on an AUDIT_NEVER rule disabled logging on that rule.
On error on AUDIT_NEVER rules, log.

Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
10 years agoaudit: audit_log_start running on auditd should not stop
Toshiyuki Okajima [Thu, 5 Dec 2013 07:15:23 +0000 (16:15 +0900)]
audit: audit_log_start running on auditd should not stop

The backlog cannot be consumed when audit_log_start is running on auditd
even if audit_log_start calls wait_for_auditd to consume it.
The situation is the deadlock because only auditd can consume the backlog.
If the other process needs to send the backlog, it can be also stopped
by the deadlock.

So, audit_log_start running on auditd should not stop.

You can see the deadlock with the following reproducer:
 # auditctl -a exit,always -S all
 # reboot

Signed-off-by: Toshiyuki Okajima <toshi.okajima@jp.fujitsu.com>
Reviewed-by: gaofeng@cn.fujitsu.com
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
10 years agoaudit: drop audit_cmd_lock in AUDIT_USER family of cases
Richard Guy Briggs [Mon, 2 Dec 2013 16:33:01 +0000 (11:33 -0500)]
audit: drop audit_cmd_lock in AUDIT_USER family of cases

We do not need to hold the audit_cmd_mutex for this family of cases.  The
possible exception to this is the call to audit_filter_user(), so drop the lock
immediately after.  To help in fixing the race we are trying to avoid, make
sure that nothing called by audit_filter_user() calls audit_log_start().  In
particular, watch out for *_audit_rule_match().

This fix will take care of systemd and anything USING audit.  It still means
that we could race with something configuring audit and auditd shutting down.

Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Reported-by: toshi.okajima@jp.fujitsu.com
Tested-by: toshi.okajima@jp.fujitsu.com
Signed-off-by: Eric Paris <eparis@redhat.com>
10 years agosmack: call WARN_ONCE() instead of calling audit_log_start()
Richard Guy Briggs [Thu, 21 Nov 2013 18:57:33 +0000 (13:57 -0500)]
smack: call WARN_ONCE() instead of calling audit_log_start()

Remove the call to audit_log() (which call audit_log_start()) and deal with
the errors in the caller, logging only once if the condition is met.  Calling
audit_log_start() in this location makes buffer allocation and locking more
complicated in the calling tree (audit_filter_user()).

Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
10 years agoselinux: call WARN_ONCE() instead of calling audit_log_start()
Richard Guy Briggs [Thu, 21 Nov 2013 18:31:40 +0000 (13:31 -0500)]
selinux: call WARN_ONCE() instead of calling audit_log_start()

Two of the conditions in selinux_audit_rule_match() should never happen and
the third indicates a race that should be retried.  Remove the calls to
audit_log() (which call audit_log_start()) and deal with the errors in the
caller, logging only once if the condition is met.  Calling audit_log_start()
in this location makes buffer allocation and locking more complicated in the
calling tree (audit_filter_user()).

Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
10 years agoaudit: convert all sessionid declaration to unsigned int
Eric Paris [Wed, 27 Nov 2013 22:35:17 +0000 (17:35 -0500)]
audit: convert all sessionid declaration to unsigned int

Right now the sessionid value in the kernel is a combination of u32,
int, and unsigned int.  Just use unsigned int throughout.

Signed-off-by: Eric Paris <eparis@redhat.com>
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
10 years agoaudit: Added exe field to audit core dump signal log
Paul Davies C [Thu, 21 Nov 2013 02:44:03 +0000 (08:14 +0530)]
audit: Added exe field to audit core dump signal log

Currently when the coredump signals are logged by the audit system, the
actual path to the executable is not logged. Without details of exe, the
system admin may not have an exact idea on what program failed.

This patch changes the audit_log_task() so that the path to the exe is also
logged.

This was copied from audit_log_task_info() and the latter enhanced to avoid
disappearing text fields.

Signed-off-by: Paul Davies C <pauldaviesc@gmail.com>
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
10 years agoaudit: prevent an older auditd shutdown from orphaning a newer auditd startup
Richard Guy Briggs [Fri, 21 Jun 2013 18:47:13 +0000 (14:47 -0400)]
audit: prevent an older auditd shutdown from orphaning a newer auditd startup

There have been reports of auditd restarts resulting in kaudit not being able
to find a newly registered auditd.  It results in reports such as:
kernel: [ 2077.233573] audit: *NO* daemon at audit_pid=1614
kernel: [ 2077.234712] audit: audit_lost=97 audit_rate_limit=0 audit_backlog_limit=320
kernel: [ 2077.234718] audit: auditd disappeared
(previously mis-spelled "dissapeared")

One possible cause is a race between the shutdown of an older auditd and a
newer one.  If the newer one sets the daemon pid to itself in kauditd before
the older one has cleared the daemon pid, the newer daemon pid will be erased.
This could be caused by an automated system, or by manual intervention, but in
either case, there is no use in having the older daemon clear the daemon pid
reference since its old pid is no longer being referenced.  This patch will
prevent that specific case, returning an error of EACCES.

The case for preventing a newer auditd from registering itself if there is an
existing auditd is a more difficult case that is beyond the scope of this
patch.

Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
10 years agoaudit: refactor audit_receive_msg() to clarify AUDIT_*_RULE* cases
Richard Guy Briggs [Wed, 20 Nov 2013 19:01:53 +0000 (14:01 -0500)]
audit: refactor audit_receive_msg() to clarify AUDIT_*_RULE* cases

audit_receive_msg() needlessly contained a fallthrough case that called
audit_receive_filter(), containing no common code between the cases.  Separate
them to make the logic clearer.  Refactor AUDIT_LIST_RULES, AUDIT_ADD_RULE,
AUDIT_DEL_RULE cases to create audit_rule_change(), audit_list_rules_send()
functions.  This should not functionally change the logic.

Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
10 years agoaudit: log AUDIT_TTY_SET config changes
Richard Guy Briggs [Fri, 15 Nov 2013 16:29:02 +0000 (11:29 -0500)]
audit: log AUDIT_TTY_SET config changes

Log transition of config changes when AUDIT_TTY_SET is called, including both
enabled and log_passwd values now in the struct.

Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
10 years agoaudit: get rid of *NO* daemon at audit_pid=0 message
Richard Guy Briggs [Tue, 26 Nov 2013 23:49:12 +0000 (18:49 -0500)]
audit: get rid of *NO* daemon at audit_pid=0 message

kauditd_send_skb is called after audit_pid was checked to be non-zero.

However, it can be set to 0 due to auditd exiting while kauditd_send_skb
is still executed and this can result in a spurious warning about missing
auditd.

Re-check audit_pid before printing the message.

Signed-off-by: Mateusz Guzik <mguzik@redhat.com>
Cc: Eric Paris <eparis@redhat.com>
Cc: linux-kernel@vger.kernel.org
Acked-by: Eric Paris <eparis@redhat.com>
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
10 years agoaudit: drop audit_log_abend()
Paul Davies C [Fri, 8 Nov 2013 04:27:39 +0000 (09:57 +0530)]
audit: drop audit_log_abend()

The audit_log_abend() is used only by the audit_core_dumps(). Thus there is no
need of maintaining the audit_log_abend() as a separate function.

This patch drops the audit_log_abend() and pushes its functionalities back to
the audit_core_dumps(). Apart from that the "reason" field is also dropped
from being logged since the reason can be deduced from the signal number.

Signed-off-by: Paul Davies C <pauldaviesc@gmail.com>
Acked-by: Eric Paris <eparis@redhat.com>
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
10 years agoaudit: allow unlimited backlog queue
Richard Guy Briggs [Tue, 22 Oct 2013 17:28:49 +0000 (13:28 -0400)]
audit: allow unlimited backlog queue

Since audit can already be disabled by "audit=0" on the kernel boot line, or by
the command "auditctl -e 0", it would be more useful to have the
audit_backlog_limit set to zero mean effectively unlimited (limited only by
system RAM).

Acked-by: Gao feng <gaofeng@cn.fujitsu.com>
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
10 years agoaudit: fix incorrect type of sessionid
Richard Guy Briggs [Tue, 26 Nov 2013 23:01:36 +0000 (18:01 -0500)]
audit: fix incorrect type of sessionid

The type of task->sessionid is unsigned int, the return
type of audit_get_sessionid should be consistent with it.

Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
10 years agoaudit: don't generate loginuid log when audit disabled
Gao feng [Fri, 1 Nov 2013 11:34:45 +0000 (19:34 +0800)]
audit: don't generate loginuid log when audit disabled

If audit is disabled, we shouldn't generate loginuid audit
log.

Acked-by: Eric Paris <eparis@redhat.com>
Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
10 years agoaudit: use old_lock in audit_set_feature
Gao feng [Fri, 1 Nov 2013 11:34:44 +0000 (19:34 +0800)]
audit: use old_lock in audit_set_feature

we already have old_lock, no need to calculate it again.

Acked-by: Eric Paris <eparis@redhat.com>
Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
10 years agoaudit: don't generate audit feature changed log when audit disabled
Gao feng [Fri, 1 Nov 2013 11:34:43 +0000 (19:34 +0800)]
audit: don't generate audit feature changed log when audit disabled

If audit is disabled,we shouldn't generate the audit log.

Acked-by: Eric Paris <eparis@redhat.com>
Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
10 years agoaudit: fix incorrect order of log new and old feature
Gao feng [Fri, 1 Nov 2013 11:34:42 +0000 (19:34 +0800)]
audit: fix incorrect order of log new and old feature

The order of new feature and old feature is incorrect,
this patch fix it.

Acked-by: Eric Paris <eparis@redhat.com>
Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
10 years agoaudit: remove useless code in audit_enable
Gao feng [Thu, 31 Oct 2013 06:31:01 +0000 (14:31 +0800)]
audit: remove useless code in audit_enable

Since kernel parameter is operated before
initcall, so the audit_initialized must be
AUDIT_UNINITIALIZED or DISABLED in audit_enable.

Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
10 years agoaudit: add audit_backlog_wait_time configuration option
Richard Guy Briggs [Wed, 18 Sep 2013 15:55:12 +0000 (11:55 -0400)]
audit: add audit_backlog_wait_time configuration option

reaahead-collector abuses the audit logging facility to discover which files
are accessed at boot time to make a pre-load list

Add a tuning option to audit_backlog_wait_time so that if auditd can't keep up,
or gets blocked, the callers won't be blocked.

Bump audit_status API version to "2".

Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
10 years agoaudit: clean up AUDIT_GET/SET local variables and future-proof API
Richard Guy Briggs [Wed, 18 Sep 2013 13:32:24 +0000 (09:32 -0400)]
audit: clean up AUDIT_GET/SET local variables and future-proof API

Re-named confusing local variable names (status_set and status_get didn't agree
with their command type name) and reduced their scope.

Future-proof API changes by not depending on the exact size of the audit_status
struct and by adding an API version field.

Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
10 years agoaudit: add kernel set-up parameter to override default backlog limit
Richard Guy Briggs [Tue, 17 Sep 2013 16:34:52 +0000 (12:34 -0400)]
audit: add kernel set-up parameter to override default backlog limit

The default audit_backlog_limit is 64.  This was a reasonable limit at one time.

systemd causes so much audit queue activity on startup that auditd doesn't
start before the backlog queue has already overflowed by more than a factor of
2.  On a system with audit= not set on the kernel command line, this isn't an
issue since that history isn't kept for auditd when it is available.  On a
system with audit=1 set on the kernel command line, kaudit tries to keep that
history until auditd is able to drain the queue.

This default can be changed by the "-b" option in audit.rules once the system
has booted, but won't help with lost messages on boot.

One way to solve this would be to increase the default backlog queue size to
avoid losing any messages before auditd is able to consume them.  This would
be overkill to the embedded community and insufficient for some servers.

Another way to solve it might be to add a kconfig option to set the default
based on the system type.  An embedded system would get the current (or
smaller) default, while Workstations might get more than now and servers might
get more.

None of these solutions helps if a system's compiled default is too small to
see the lost messages without compiling a new kernel.

This patch adds a kernel set-up parameter (audit already has one to
enable/disable it) "audit_backlog_limit=<n>" that overrides the default to
allow the system administrator to set the backlog limit.

Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
10 years agodocumentation: document the audit= kernel start-up parameter
Richard Guy Briggs [Tue, 24 Sep 2013 01:53:35 +0000 (21:53 -0400)]
documentation: document the audit= kernel start-up parameter

Add the "audit=" kernel start-up parameter to Documentation/kernel-parameters.txt.

Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
10 years agoaudit: efficiency fix 2: request exclusive wait since all need same resource
Dan Duval [Mon, 16 Sep 2013 15:16:35 +0000 (11:16 -0400)]
audit: efficiency fix 2: request exclusive wait since all need same resource

These and similar errors were seen on a patched 3.8 kernel when the
audit subsystem was overrun during boot:

  udevd[876]: worker [887] unexpectedly returned with status 0x0100
  udevd[876]: worker [887] failed while handling
'/devices/pci0000:00/0000:00:03.0/0000:40:00.0'
  udevd[876]: worker [880] unexpectedly returned with status 0x0100
  udevd[876]: worker [880] failed while handling
'/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1'

  udevadm settle - timeout of 180 seconds reached, the event queue
contains:
    /sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1 (3995)
    /sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/INT3F0D:00 (4034)

  audit: audit_backlog=258 > audit_backlog_limit=256
  audit: audit_lost=1 audit_rate_limit=0 audit_backlog_limit=256

The change below increases the efficiency of the audit code and prevents it
from being overrun:

Use add_wait_queue_exclusive() in wait_for_auditd() to put the
thread on the wait queue.  When kauditd dequeues an skb, all
of the waiting threads are waiting for the same resource, but
only one is going to get it, so there's no need to wake up
more than one waiter.

See: https://lkml.org/lkml/2013/9/2/479

Signed-off-by: Dan Duval <dan.duval@oracle.com>
Signed-off-by: Chuck Anderson <chuck.anderson@oracle.com>
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
10 years agoaudit: efficiency fix 1: only wake up if queue shorter than backlog limit
Dan Duval [Mon, 16 Sep 2013 15:11:12 +0000 (11:11 -0400)]
audit: efficiency fix 1: only wake up if queue shorter than backlog limit

These and similar errors were seen on a patched 3.8 kernel when the
audit subsystem was overrun during boot:

  udevd[876]: worker [887] unexpectedly returned with status 0x0100
  udevd[876]: worker [887] failed while handling
'/devices/pci0000:00/0000:00:03.0/0000:40:00.0'
  udevd[876]: worker [880] unexpectedly returned with status 0x0100
  udevd[876]: worker [880] failed while handling
'/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1'

  udevadm settle - timeout of 180 seconds reached, the event queue
contains:
    /sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1 (3995)
    /sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/INT3F0D:00 (4034)

  audit: audit_backlog=258 > audit_backlog_limit=256
  audit: audit_lost=1 audit_rate_limit=0 audit_backlog_limit=256

The change below increases the efficiency of the audit code and prevents it
from being overrun:

Only issue a wake_up in kauditd if the length of the skb queue is less than the
backlog limit.  Otherwise, threads waiting in wait_for_auditd() will simply
wake up, discover that the queue is still too long for them to proceed, and go
back to sleep.  This results in wasted context switches and machine cycles.
kauditd_thread() is the only function that removes buffers from audit_skb_queue
so we can't race.  If we did, the timeout in wait_for_auditd() would expire and
the waiting thread would continue.

See: https://lkml.org/lkml/2013/9/2/479

Signed-off-by: Dan Duval <dan.duval@oracle.com>
Signed-off-by: Chuck Anderson <chuck.anderson@oracle.com>
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
10 years agoaudit: make use of remaining sleep time from wait_for_auditd
Richard Guy Briggs [Mon, 16 Sep 2013 14:45:59 +0000 (10:45 -0400)]
audit: make use of remaining sleep time from wait_for_auditd

If wait_for_auditd() times out, go immediately to the error function rather
than retesting the loop conditions.

Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
10 years agoaudit: reset audit backlog wait time after error recovery
Richard Guy Briggs [Fri, 13 Sep 2013 03:03:51 +0000 (23:03 -0400)]
audit: reset audit backlog wait time after error recovery

When the audit queue overflows and times out (audit_backlog_wait_time), the
audit queue overflow timeout is set to zero.  Once the audit queue overflow
timeout condition recovers, the timeout should be reset to the original value.

See also:
https://lkml.org/lkml/2013/9/2/473

Cc: stable@vger.kernel.org # v3.8-rc4+
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Dan Duval <dan.duval@oracle.com>
Signed-off-by: Chuck Anderson <chuck.anderson@oracle.com>
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
10 years agoaudit: listen in all network namespaces
Richard Guy Briggs [Tue, 16 Jul 2013 17:18:45 +0000 (13:18 -0400)]
audit: listen in all network namespaces

Convert audit from only listening in init_net to use register_pernet_subsys()
to dynamically manage the netlink socket list.

Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
10 years agoaudit: restore order of tty and ses fields in log output
Richard Guy Briggs [Mon, 15 Jul 2013 14:23:11 +0000 (10:23 -0400)]
audit: restore order of tty and ses fields in log output

When being refactored from audit_log_start() to audit_log_task_info(), in
commit e23eb920 the tty and ses fields in the log output got transposed.
Restore to original order to avoid breaking search tools.

Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
10 years agoaudit: fix netlink portid naming and types
Richard Guy Briggs [Wed, 14 Aug 2013 15:32:45 +0000 (11:32 -0400)]
audit: fix netlink portid naming and types

Normally, netlink ports use the PID of the userspace process as the port ID.
If the PID is already in use by a port, the kernel will allocate another port
ID to avoid conflict.  Re-name all references to netlink ports from pid to
portid to reflect this reality and avoid confusion with actual PIDs.  Ports
use the __u32 type, so re-type all portids accordingly.

(This patch is very similar to ebiederman's 5deadd69)

Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
10 years agoaudit: Simplify and correct audit_log_capset
Eric W. Biederman [Tue, 19 Mar 2013 07:02:25 +0000 (00:02 -0700)]
audit: Simplify and correct audit_log_capset

- Always report the current process as capset now always only works on
  the current process.  This prevents reporting 0 or a random pid in
  a random pid namespace.

- Don't bother to pass the pid as is available.

Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
(cherry picked from commit bcc85f0af31af123e32858069eb2ad8f39f90e67)
(cherry picked from commit f911cac4556a7a23e0b3ea850233d13b32328692)

Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
[eparis: fix build error when audit disabled]
Signed-off-by: Eric Paris <eparis@redhat.com>
11 years agoMerge tag 'v3.12'
Eric Paris [Fri, 22 Nov 2013 23:57:08 +0000 (18:57 -0500)]
Merge tag 'v3.12'

Linux 3.12

Conflicts:
fs/exec.c

11 years agoaudit: fix type of sessionid in audit_set_loginuid()
Eric Paris [Wed, 6 Nov 2013 15:47:17 +0000 (10:47 -0500)]
audit: fix type of sessionid in audit_set_loginuid()

sfr pointed out that with CONFIG_UIDGID_STRICT_TYPE_CHECKS set the audit
tree would not build.  This is because the oldsessionid in
audit_set_loginuid() was accidentally being declared as a kuid_t.  This
patch fixes that declaration mistake.

Example of problem:
kernel/auditsc.c: In function 'audit_set_loginuid':
kernel/auditsc.c:2003:15: error: incompatible types when assigning to
type 'kuid_t' from type 'int'
  oldsessionid = audit_get_sessionid(current);

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Eric Paris <eparis@redhat.com>
11 years agoaudit: call audit_bprm() only once to add AUDIT_EXECVE information
Richard Guy Briggs [Wed, 30 Oct 2013 22:05:24 +0000 (18:05 -0400)]
audit: call audit_bprm() only once to add AUDIT_EXECVE information

Move the audit_bprm() call from search_binary_handler() to exec_binprm().  This
allows us to get rid of the mm member of struct audit_aux_data_execve since
bprm->mm will equal current->mm.

This also mitigates the issue that ->argc could be modified by the
load_binary() call in search_binary_handler().

audit_bprm() was being called to add an AUDIT_EXECVE record to the audit
context every time search_binary_handler() was recursively called.  Only one
reference is necessary.

Reported-by: Oleg Nesterov <onestero@redhat.com>
Cc: Eric Paris <eparis@redhat.com>
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
---
This patch is against 3.11, but was developed on Oleg's post-3.11 patches that
introduce exec_binprm().

11 years agoaudit: move audit_aux_data_execve contents into audit_context union
Richard Guy Briggs [Wed, 30 Oct 2013 21:56:13 +0000 (17:56 -0400)]
audit: move audit_aux_data_execve contents into audit_context union

audit_bprm() was being called to add an AUDIT_EXECVE record to the audit
context every time search_binary_handler() was recursively called.  Only one
reference is necessary, so just update it.  Move the the contents of
audit_aux_data_execve into the union in audit_context, removing dependence on a
kmalloc along the way.

Reported-by: Oleg Nesterov <onestero@redhat.com>
Cc: Eric Paris <eparis@redhat.com>
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
11 years agoaudit: remove unused envc member of audit_aux_data_execve
Richard Guy Briggs [Wed, 23 Oct 2013 20:55:38 +0000 (16:55 -0400)]
audit: remove unused envc member of audit_aux_data_execve

Get rid of write-only audit_aux_data_exeve structure member envc.

Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
11 years agoaudit: Kill the unused struct audit_aux_data_capset
Eric W. Biederman [Tue, 19 Mar 2013 07:09:40 +0000 (00:09 -0700)]
audit: Kill the unused struct audit_aux_data_capset

Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
(cherry picked from ebiederman commit 6904431d6b41190e42d6b94430b67cb4e7e6a4b7)
Signed-off-by: Eric Paris <eparis@redhat.com>
11 years agoaudit: do not reject all AUDIT_INODE filter types
Eric Paris [Wed, 4 Sep 2013 19:01:43 +0000 (15:01 -0400)]
audit: do not reject all AUDIT_INODE filter types

commit ab61d38ed8cf670946d12dc46b9198b521c790ea tried to merge the
invalid filter checking into a single function.  However AUDIT_INODE
filters were not verified in the new generic checker.  Thus such rules
were being denied even though they were perfectly valid.

Ex:
$ auditctl -a exit,always -F arch=b64 -S open -F key=/foo -F inode=6955 -F devmajor=9 -F devminor=1
Error sending add rule data request (Invalid argument)

Signed-off-by: Eric Paris <eparis@redhat.com>
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
11 years agoaudit: suppress stock memalloc failure warnings since already managed
Richard Guy Briggs [Wed, 2 Oct 2013 01:14:54 +0000 (21:14 -0400)]
audit: suppress stock memalloc failure warnings since already managed

Supress the stock memory allocation failure warnings for audit buffers
since audit alreay takes care of memory allocation failure warnings, including
rate-limiting, in audit_log_start().

Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
11 years agoaudit: log the audit_names record type
Jeff Layton [Wed, 8 May 2013 14:32:23 +0000 (10:32 -0400)]
audit: log the audit_names record type

...to make it clear what the intent behind each record's operation was.

In many cases you can infer this, based on the context of the syscall
and the result. In other cases it's not so obvious. For instance, in
the case where you have a file being renamed over another, you'll have
two different records with the same filename but different inode info.
By logging this information we can clearly tell which one was created
and which was deleted.

This fixes what was broken in commit bfcec708.
Commit 79f6530c should also be backported to stable v3.7+.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
11 years agoaudit: add child record before the create to handle case where create fails
Jeff Layton [Wed, 8 May 2013 14:25:58 +0000 (10:25 -0400)]
audit: add child record before the create to handle case where create fails

Historically, when a syscall that creates a dentry fails, you get an audit
record that looks something like this (when trying to create a file named
"new" in "/tmp/tmp.SxiLnCcv63"):

    type=PATH msg=audit(1366128956.279:965): item=0 name="/tmp/tmp.SxiLnCcv63/new" inode=2138308 dev=fd:02 mode=040700 ouid=0 ogid=0 rdev=00:00 obj=staff_u:object_r:user_tmp_t:s15:c0.c1023

This record makes no sense since it's associating the inode information for
"/tmp/tmp.SxiLnCcv63" with the path "/tmp/tmp.SxiLnCcv63/new". The recent
patch I posted to fix the audit_inode call in do_last fixes this, by making it
look more like this:

    type=PATH msg=audit(1366128765.989:13875): item=0 name="/tmp/tmp.DJ1O8V3e4f/" inode=141 dev=fd:02 mode=040700 ouid=0 ogid=0 rdev=00:00 obj=staff_u:object_r:user_tmp_t:s15:c0.c1023

While this is more correct, if the creation of the file fails, then we
have no record of the filename that the user tried to create.

This patch adds a call to audit_inode_child to may_create. This creates
an AUDIT_TYPE_CHILD_CREATE record that will sit in place until the
create succeeds. When and if the create does succeed, then this record
will be updated with the correct inode info from the create.

This fixes what was broken in commit bfcec708.
Commit 79f6530c should also be backported to stable v3.7+.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
11 years agoaudit: use given values in tty_audit enable api
Richard Guy Briggs [Fri, 3 May 2013 18:03:49 +0000 (14:03 -0400)]
audit: use given values in tty_audit enable api

In send/GET, we don't want the kernel to lie about what value is set.

Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
11 years agoaudit: use nlmsg_len() to get message payload length
Mathias Krause [Mon, 30 Sep 2013 20:04:25 +0000 (22:04 +0200)]
audit: use nlmsg_len() to get message payload length

Using the nlmsg_len member of the netlink header to test if the message
is valid is wrong as it includes the size of the netlink header itself.
Thereby allowing to send short netlink messages that pass those checks.

Use nlmsg_len() instead to test for the right message length. The result
of nlmsg_len() is guaranteed to be non-negative as the netlink message
already passed the checks of nlmsg_ok().

Also switch to min_t() to please checkpatch.pl.

Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Eric Paris <eparis@redhat.com>
Cc: stable@vger.kernel.org # v2.6.6+ for the 1st hunk, v2.6.23+ for the 2nd
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
11 years agoaudit: use memset instead of trying to initialize field by field
Eric Paris [Tue, 5 Nov 2013 15:48:02 +0000 (10:48 -0500)]
audit: use memset instead of trying to initialize field by field

We currently are setting fields to 0 to initialize the structure
declared on the stack.  This is a bad idea as if the structure has holes
or unpacked space these will not be initialized.  Just use memset.  This
is not a performance critical section of code.

Signed-off-by: Eric Paris <eparis@redhat.com>
11 years agoaudit: fix info leak in AUDIT_GET requests
Mathias Krause [Mon, 30 Sep 2013 20:04:24 +0000 (22:04 +0200)]
audit: fix info leak in AUDIT_GET requests

We leak 4 bytes of kernel stack in response to an AUDIT_GET request as
we miss to initialize the mask member of status_set. Fix that.

Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Eric Paris <eparis@redhat.com>
Cc: stable@vger.kernel.org # v2.6.6+
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
11 years agoaudit: update AUDIT_INODE filter rule to comparator function
Richard Guy Briggs [Thu, 4 Jul 2013 16:56:11 +0000 (12:56 -0400)]
audit: update AUDIT_INODE filter rule to comparator function

It appears this one comparison function got missed in f368c07d (and 9c937dcc).

Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
11 years agoaudit: audit feature to set loginuid immutable
Eric Paris [Thu, 23 May 2013 18:26:00 +0000 (14:26 -0400)]
audit: audit feature to set loginuid immutable

This adds a new 'audit_feature' bit which allows userspace to set it
such that the loginuid is absolutely immutable, even if you have
CAP_AUDIT_CONTROL.

Signed-off-by: Eric Paris <eparis@redhat.com>
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
11 years agoaudit: audit feature to only allow unsetting the loginuid
Eric Paris [Fri, 24 May 2013 13:18:04 +0000 (09:18 -0400)]
audit: audit feature to only allow unsetting the loginuid

This is a new audit feature which only grants processes with
CAP_AUDIT_CONTROL the ability to unset their loginuid.  They cannot
directly set it from a valid uid to another valid uid.  The ability to
unset the loginuid is nice because a priviledged task, like that of
container creation, can unset the loginuid and then priv is not needed
inside the container when a login daemon needs to set the loginuid.

Signed-off-by: Eric Paris <eparis@redhat.com>
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
11 years agoaudit: allow unsetting the loginuid (with priv)
Eric Paris [Fri, 24 May 2013 13:49:14 +0000 (09:49 -0400)]
audit: allow unsetting the loginuid (with priv)

If a task has CAP_AUDIT_CONTROL allow that task to unset their loginuid.
This would allow a child of that task to set their loginuid without
CAP_AUDIT_CONTROL.  Thus when launching a new login daemon, a
priviledged helper would be able to unset the loginuid and then the
daemon, which may be malicious user facing, do not need priv to function
correctly.

Signed-off-by: Eric Paris <eparis@redhat.com>
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
11 years agoaudit: remove CONFIG_AUDIT_LOGINUID_IMMUTABLE
Eric Paris [Fri, 24 May 2013 13:39:29 +0000 (09:39 -0400)]
audit: remove CONFIG_AUDIT_LOGINUID_IMMUTABLE

After trying to use this feature in Fedora we found the hard coding
policy like this into the kernel was a bad idea.  Surprise surprise.
We ran into these problems because it was impossible to launch a
container as a logged in user and run a login daemon inside that container.
This reverts back to the old behavior before this option was added.  The
option will be re-added in a userspace selectable manor such that
userspace can choose when it is and when it is not appropriate.

Signed-off-by: Eric Paris <eparis@redhat.com>
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
11 years agoaudit: loginuid functions coding style
Eric Paris [Fri, 24 May 2013 12:58:31 +0000 (08:58 -0400)]
audit: loginuid functions coding style

This is just a code rework.  It makes things more readable.  It does not
make any functional changes.

It does change the log messages to include both the old session id as
well the new and it includes a new res field, which means we get
messages even when the user did not have permission to change the
loginuid.

Signed-off-by: Eric Paris <eparis@redhat.com>
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
11 years agoselinux: apply selinux checks on new audit message types
Eric Paris [Fri, 24 May 2013 16:09:50 +0000 (12:09 -0400)]
selinux: apply selinux checks on new audit message types

We use the read check to get the feature set (like AUDIT_GET) and the
write check to set the features (like AUDIT_SET).

Signed-off-by: Eric Paris <eparis@redhat.com>
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
11 years agoaudit: implement generic feature setting and retrieving
Eric Paris [Wed, 22 May 2013 16:54:49 +0000 (12:54 -0400)]
audit: implement generic feature setting and retrieving

The audit_status structure was not designed with extensibility in mind.
Define a new AUDIT_SET_FEATURE message type which takes a new structure
of bits where things can be enabled/disabled/locked one at a time.  This
structure should be able to grow in the future while maintaining forward
and backward compatibility (based loosly on the ideas from capabilities
and prctl)

This does not actually add any features, but is just infrastructure to
allow new on/off types of audit system features.

Signed-off-by: Eric Paris <eparis@redhat.com>
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
11 years agoaudit: change decimal constant to macro for invalid uid
Richard Guy Briggs [Mon, 20 May 2013 19:08:18 +0000 (15:08 -0400)]
audit: change decimal constant to macro for invalid uid

SFR reported this 2013-05-15:

> After merging the final tree, today's linux-next build (i386 defconfig)
> produced this warning:
>
> kernel/auditfilter.c: In function 'audit_data_to_entry':
> kernel/auditfilter.c:426:3: warning: this decimal constant is unsigned only
> in ISO C90 [enabled by default]
>
> Introduced by commit 780a7654cee8 ("audit: Make testing for a valid
> loginuid explicit") from Linus' tree.

Replace this decimal constant in the code with a macro to make it more readable
(add to the unsigned cast to quiet the warning).

Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
11 years agoaudit: printk USER_AVC messages when audit isn't enabled
Tyler Hicks [Fri, 26 Jul 2013 01:02:55 +0000 (18:02 -0700)]
audit: printk USER_AVC messages when audit isn't enabled

When the audit=1 kernel parameter is absent and auditd is not running,
AUDIT_USER_AVC messages are being silently discarded.

AUDIT_USER_AVC messages should be sent to userspace using printk(), as
mentioned in the commit message of 4a4cd633 ("AUDIT: Optimise the
audit-disabled case for discarding user messages").

When audit_enabled is 0, audit_receive_msg() discards all user messages
except for AUDIT_USER_AVC messages. However, audit_log_common_recv_msg()
refuses to allocate an audit_buffer if audit_enabled is 0. The fix is to
special case AUDIT_USER_AVC messages in both functions.

It looks like commit 50397bd1 ("[AUDIT] clean up audit_receive_msg()")
introduced this bug.

Cc: <stable@kernel.org> # v2.6.25+
Signed-off-by: Tyler Hicks <tyhicks@canonical.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Eric Paris <eparis@redhat.com>
Cc: linux-audit@redhat.com
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
11 years agoaudit_alloc: clear TIF_SYSCALL_AUDIT if !audit_context
Oleg Nesterov [Sun, 15 Sep 2013 17:11:09 +0000 (19:11 +0200)]
audit_alloc: clear TIF_SYSCALL_AUDIT if !audit_context

If audit_filter_task() nacks the new thread it makes sense
to clear TIF_SYSCALL_AUDIT which can be copied from parent
by dup_task_struct().

A wrong TIF_SYSCALL_AUDIT is not really bad but it triggers
the "slow" audit paths in entry.S to ensure the task can not
miss audit_syscall_*() calls, this is pointless if the task
has no ->audit_context.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Steve Grubb <sgrubb@redhat.com>
Acked-by: Eric Paris <eparis@redhat.com>
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
11 years agoAudit: remove duplicate comments
Gao feng [Mon, 23 Sep 2013 07:55:44 +0000 (15:55 +0800)]
Audit: remove duplicate comments

Remove it.

Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
11 years agoaudit: remove newline accidentally added during session id helper refactor
Richard Guy Briggs [Wed, 18 Sep 2013 15:17:43 +0000 (11:17 -0400)]
audit: remove newline accidentally added during session id helper refactor

A newline was accidentally added during session ID helper refactorization in
commit 4d3fb709.  This needlessly uses up buffer space, messes up syslog
formatting and makes userspace processing less efficient.  Remove it.

Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Acked-by: Eric Paris <eparis@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
11 years agoaudit: remove duplicate inclusion of the netlink header
Ilya V. Matveychikov [Sun, 29 Sep 2013 11:53:40 +0000 (15:53 +0400)]
audit: remove duplicate inclusion of the netlink header

Signed-off-by: Ilya V. Matveychikov <matvejchikov@gmail.com>
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
11 years agoaudit: format user messages to size of MAX_AUDIT_MESSAGE_LENGTH
Richard Guy Briggs [Mon, 16 Sep 2013 22:20:42 +0000 (18:20 -0400)]
audit: format user messages to size of MAX_AUDIT_MESSAGE_LENGTH

Messages of type AUDIT_USER_TTY were being formatted to 1024 octets,
truncating messages approaching MAX_AUDIT_MESSAGE_LENGTH (8970 octets).

Set the formatting to 8560 characters, given maximum estimates for prefix and
suffix budgets.

See the problem discussion:
https://www.redhat.com/archives/linux-audit/2009-January/msg00030.html

And the new size rationale:
https://www.redhat.com/archives/linux-audit/2013-September/msg00016.html

Test ~8k messages with:
auditctl -m "$(for i in $(seq -w 001 820);do echo -n "${i}0______";done)"

Reported-by: LC Bruzenak <lenny@magitekltd.com>
Reported-by: Justin Stephenson <jstephen@redhat.com>
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
11 years agoLinux 3.12
Linus Torvalds [Sun, 3 Nov 2013 23:41:51 +0000 (15:41 -0800)]
Linux 3.12

11 years agoMerge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus
Linus Torvalds [Sun, 3 Nov 2013 19:36:41 +0000 (11:36 -0800)]
Merge branch 'upstream' of git://git.linux-mips.org/ralf/upstream-linus

Pull MIPS fixes from Ralf Baechle:
 "Three fixes across arch/mips with the most complex one being the GIC
  interrupt fix - at nine lines still not monster.  I'm confident this
  are the final MIPS patches even if there should go for an rc8"

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus:
  MIPS: ralink: fix return value check in rt_timer_probe()
  MIPS: malta: Fix GIC interrupt offsets
  MIPS: Perf: Fix 74K cache map

11 years agoipc, msg: forbid negative values for "msg{max,mnb,mni}"
Mathias Krause [Sun, 3 Nov 2013 11:36:28 +0000 (12:36 +0100)]
ipc, msg: forbid negative values for "msg{max,mnb,mni}"

Negative message lengths make no sense -- so don't do negative queue
lenghts or identifier counts. Prevent them from getting negative.

Also change the underlying data types to be unsigned to avoid hairy
surprises with sign extensions in cases where those variables get
evaluated in unsigned expressions with bigger data types, e.g size_t.

In case a user still wants to have "unlimited" sizes she could just use
INT_MAX instead.

Signed-off-by: Mathias Krause <minipli@googlemail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agoMerge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty...
Linus Torvalds [Sat, 2 Nov 2013 17:27:29 +0000 (10:27 -0700)]
Merge tag 'fixes-for-linus' of git://git./linux/kernel/git/rusty/linux

Pull ARM kallsyms fix from Rusty Russell:
 "Last minute perf unbreakage for ARM modules; spent a day in
  linux-next"

* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux:
  scripts/kallsyms: filter symbols not in kernel address space

11 years agoARC: Incorrect mm reference used in vmalloc fault handler
Vineet Gupta [Sat, 2 Nov 2013 12:17:49 +0000 (17:47 +0530)]
ARC: Incorrect mm reference used in vmalloc fault handler

A vmalloc fault needs to sync up PGD/PTE entry from init_mm to current
task's "active_mm".  ARC vmalloc fault handler however was using mm.

A vmalloc fault for non user task context (actually pre-userland, from
init thread's open for /dev/console) caused the handler to deref NULL mm
(for mm->pgd)

The reasons it worked so far is amazing:

1. By default (!SMP), vmalloc fault handler uses a cached value of PGD.
   In SMP that MMU register is repurposed hence need for mm pointer deref.

2. In pre-3.12 SMP kernel, the problem triggering vmalloc didn't exist in
   pre-userland code path - it was introduced with commit 20bafb3d23d108bc
   "n_tty: Move buffers into n_tty_data"

Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Cc: Gilad Ben-Yossef <gilad@benyossef.com>
Cc: Noam Camus <noamc@ezchip.com>
Cc: stable@vger.kernel.org #3.10 and 3.11
Cc: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agoscripts/kallsyms: filter symbols not in kernel address space
Ming Lei [Fri, 1 Nov 2013 22:41:33 +0000 (09:11 +1030)]
scripts/kallsyms: filter symbols not in kernel address space

This patch uses CONFIG_PAGE_OFFSET to filter symbols which
are not in kernel address space because these symbols are
generally for generating code purpose and can't be run at
kernel mode, so we needn't keep them in /proc/kallsyms.

For example, on ARM there are some symbols which may be
linked in relocatable code section, then perf can't parse
symbols any more from /proc/kallsyms, this patch fixes the
problem (introduced b9b32bf70f2fb710b07c94e13afbc729afe221da)

Cc: Russell King <linux@arm.linux.org.uk>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Michal Marek <mmarek@suse.cz>
Signed-off-by: Ming Lei <tom.leiming@gmail.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: stable@vger.kernel.org
11 years agoMerge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Fri, 1 Nov 2013 19:54:51 +0000 (12:54 -0700)]
Merge branch 'perf-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull perf fixes from Ingo Molnar:
 "Two fixes:

   - Fix 'NMI handler took too long to run' false positives

     [ Genuine NMI overhead speedups will come for v3.13, this commit
       only fixes a measurement bug ]

   - Fix perf ring-buffer missed barrier causing (rare) ring-buffer data
     corruption on ppc64"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/x86: Fix NMI measurements
  perf: Fix perf ring buffer memory ordering

11 years agoMerge tag 'usb-3.12-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Linus Torvalds [Fri, 1 Nov 2013 19:23:56 +0000 (12:23 -0700)]
Merge tag 'usb-3.12-rc8' of git://git./linux/kernel/git/gregkh/usb

Pull USB fixes from Greg KH:
 "Here is a set of patches that revert all of the changes done to the
  pl2303 USB serial driver in the 3.12-rc timeframe, as it turns out
  they break some devices that work just fine on 3.11.  As it's not a
  good idea to break working systems, drop them all and they will be
  reworked for future kernel versions such that there is no breakage.

  I've also included a MAINTAINERS update for the USB serial subsystem
  and a new device id for the ftdi_sio driver as well"

* tag 'usb-3.12-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  USB: serial: ftdi_sio: add id for Z3X Box device
  USB: Maintainers change for usb serial drivers
  Revert "USB: pl2303: restrict the divisor based baud rate encoding method to the "HX" chip type"
  Revert "usb: pl2303: fix+improve the divsor based baud rate encoding method"
  Revert "usb: pl2303: do not round to the next nearest standard baud rate for the divisor based baud rate encoding method"
  Revert "usb: pl2303: remove 500000 baud from the list of standard baud rates"
  Revert "usb: pl2303: move the two baud rate encoding methods to separate functions"
  Revert "usb: pl2303: increase the allowed baud rate range for the divisor based encoding method"
  Revert "usb: pl2303: also use the divisor based baud rate encoding method for baud rates < 115200 with HX chips"
  Revert "usb: pl2303: add two comments concerning the supported baud rates with HX chips"
  Revert "pl2303: simplify the else-if contruct for type_1 chips in pl2303_startup()"
  Revert "pl2303: improve the chip type information output on startup"
  Revert "pl2303: improve the chip type detection/distinction"
  Revert "USB: pl2303: distinguish between original and cloned HX chips"

11 years agoMerge tag 'sound-3.12' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Linus Torvalds [Fri, 1 Nov 2013 19:23:22 +0000 (12:23 -0700)]
Merge tag 'sound-3.12' of git://git./linux/kernel/git/tiwai/sound

Pull more sound fixes from Takashi Iwai:
 "The fixes for random bugs that have been reported lately in the game:
  a few fixes in ASoC dpam and wm_hubs bugs spotted by Coverity, a
  one-liner HD-audio fixup, and a fix for Oops with DPCM.

  They are not so critically urgent bugs, but all small and safe"

* tag 'sound-3.12' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: fix oops in snd_pcm_info() caused by ASoC DPCM
  ASoC: wm_hubs: Add missing break in hp_supply_event()
  ALSA: hda - Add a fixup for ASUS N76VZ
  ASoC: dapm: Return -ENOMEM in snd_soc_dapm_new_dai_widgets()
  ASoC: dapm: Fix source list debugfs outputs

11 years agoMerge tag 'clk-fixes-for-linus' of git://git.linaro.org/people/mturquette/linux
Linus Torvalds [Fri, 1 Nov 2013 19:22:47 +0000 (12:22 -0700)]
Merge tag 'clk-fixes-for-linus' of git://git.linaro.org/people/mturquette/linux

Pull clock subsystem fixes from Mike Turquette.

* tag 'clk-fixes-for-linus' of git://git.linaro.org/people/mturquette/linux:
  clk: fixup argument order when setting VCO parameters
  clk: socfpga: Fix incorrect sdmmc clock name
  clk: armada-370: fix tclk frequencies
  clk: nomadik: set all timers to use 2.4 MHz TIMCLK

11 years agomemcg: remove incorrect underflow check
Greg Thelen [Fri, 1 Nov 2013 19:16:59 +0000 (12:16 -0700)]
memcg: remove incorrect underflow check

When a memcg is deleted mem_cgroup_reparent_charges() moves charged
memory to the parent memcg.  As of v3.11-9444-g3ea67d0 "memcg: add per
cgroup writeback pages accounting" there's bad pointer read.  The goal
was to check for counter underflow.  The counter is a per cpu counter
and there are two problems with the code:

 (1) per cpu access function isn't used, instead a naked pointer is used
     which easily causes oops.
 (2) the check doesn't sum all cpus

Test:
  $ cd /sys/fs/cgroup/memory
  $ mkdir x
  $ echo 3 > /proc/sys/vm/drop_caches
  $ (echo $BASHPID >> x/tasks && exec cat) &
  [1] 7154
  $ grep ^mapped x/memory.stat
  mapped_file 53248
  $ echo 7154 > tasks
  $ rmdir x
  <OOPS>

The fix is to remove the check.  It's currently dangerous and isn't
worth fixing it to use something expensive, such as
percpu_counter_sum(), for each reparented page.  __this_cpu_read() isn't
enough to fix this because there's no guarantees of the current cpus
count.  The only guarantees is that the sum of all per-cpu counter is >=
nr_pages.

Fixes: 3ea67d06e467 ("memcg: add per cgroup writeback pages accounting")
Reported-and-tested-by: Flavio Leitner <fbl@redhat.com>
Signed-off-by: Greg Thelen <gthelen@google.com>
Reviewed-by: Sha Zhengju <handai.szj@taobao.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agoUSB: serial: ftdi_sio: add id for Z3X Box device
Алексей Крамаренко [Fri, 1 Nov 2013 13:26:38 +0000 (17:26 +0400)]
USB: serial: ftdi_sio: add id for Z3X Box device

Custom VID/PID for Z3X Box device, popular tool for cellphone flashing.

Signed-off-by: Alexey E. Kramarenko <alexeyk13@yandex.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agoUSB: Maintainers change for usb serial drivers
Greg KH [Wed, 30 Oct 2013 18:07:31 +0000 (11:07 -0700)]
USB: Maintainers change for usb serial drivers

Johan has been conned^Wgracious in accepting the maintainership of the
USB serial drivers, especially as he's been doing all of the real work
for the past few years.

At the same time, remove a bunch of old entries for USB serial drivers
that don't make sense anymore, given that the developers are no longer
around, and individual driver maintainerships for tiny things like this
is pretty pointless.

Acked-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agoRevert "USB: pl2303: restrict the divisor based baud rate encoding method to the...
Greg Kroah-Hartman [Fri, 1 Nov 2013 16:19:56 +0000 (09:19 -0700)]
Revert "USB: pl2303: restrict the divisor based baud rate encoding method to the "HX" chip type"

This reverts commit b8bdad608213caffa081a97d2e937e5fe08c4046.

Revert all of the pl2303 changes that went into 3.12-rc1 and -rc2 as
they cause regressions on some versions of the chip.  This will all be
revisited for later kernel versions when we can figure out how to handle
this in a way that does not break working devices.

Reported-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: Frank Schäfer <fschaefer.oss@googlemail.com>
Acked-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agoRevert "usb: pl2303: fix+improve the divsor based baud rate encoding method"
Greg Kroah-Hartman [Fri, 1 Nov 2013 16:19:45 +0000 (09:19 -0700)]
Revert "usb: pl2303: fix+improve the divsor based baud rate encoding method"

This reverts commit 57ce61aad748ceaa08c859da04043ad7dae7c15e.

Revert all of the pl2303 changes that went into 3.12-rc1 and -rc2 as
they cause regressions on some versions of the chip.  This will all be
revisited for later kernel versions when we can figure out how to handle
this in a way that does not break working devices.

Reported-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: Frank Schäfer <fschaefer.oss@googlemail.com>
Acked-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agoRevert "usb: pl2303: do not round to the next nearest standard baud rate for the...
Greg Kroah-Hartman [Fri, 1 Nov 2013 16:19:34 +0000 (09:19 -0700)]
Revert "usb: pl2303: do not round to the next nearest standard baud rate for the divisor based baud rate encoding method"

This reverts commit 75417d9f99f89ab241de69d7db15af5842b488c4.

Revert all of the pl2303 changes that went into 3.12-rc1 and -rc2 as
they cause regressions on some versions of the chip.  This will all be
revisited for later kernel versions when we can figure out how to handle
this in a way that does not break working devices.

Reported-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: Frank Schäfer <fschaefer.oss@googlemail.com>
Acked-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agoRevert "usb: pl2303: remove 500000 baud from the list of standard baud rates"
Greg Kroah-Hartman [Fri, 1 Nov 2013 16:19:24 +0000 (09:19 -0700)]
Revert "usb: pl2303: remove 500000 baud from the list of standard baud rates"

This reverts commit b9208c721ce736125fe58d398319513a27850fd8.

Revert all of the pl2303 changes that went into 3.12-rc1 and -rc2 as
they cause regressions on some versions of the chip.  This will all be
revisited for later kernel versions when we can figure out how to handle
this in a way that does not break working devices.

Reported-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: Frank Schäfer <fschaefer.oss@googlemail.com>
Acked-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agoRevert "usb: pl2303: move the two baud rate encoding methods to separate functions"
Greg Kroah-Hartman [Fri, 1 Nov 2013 16:19:03 +0000 (09:19 -0700)]
Revert "usb: pl2303: move the two baud rate encoding methods to separate functions"

This reverts commit e917ba01d69ad705a4cd6a6c77538f55d84f5907.

Revert all of the pl2303 changes that went into 3.12-rc1 and -rc2 as
they cause regressions on some versions of the chip.  This will all be
revisited for later kernel versions when we can figure out how to handle
this in a way that does not break working devices.

Reported-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: Frank Schäfer <fschaefer.oss@googlemail.com>
Acked-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agoRevert "usb: pl2303: increase the allowed baud rate range for the divisor based encod...
Greg Kroah-Hartman [Fri, 1 Nov 2013 16:18:47 +0000 (09:18 -0700)]
Revert "usb: pl2303: increase the allowed baud rate range for the divisor based encoding method"

This reverts commit b5c16c6a031c52cc4b7dda6c3de46462fbc92eab.

Revert all of the pl2303 changes that went into 3.12-rc1 and -rc2 as
they cause regressions on some versions of the chip.  This will all be
revisited for later kernel versions when we can figure out how to handle
this in a way that does not break working devices.

Reported-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: Frank Schäfer <fschaefer.oss@googlemail.com>
Acked-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agoRevert "usb: pl2303: also use the divisor based baud rate encoding method for baud...
Greg Kroah-Hartman [Fri, 1 Nov 2013 16:18:38 +0000 (09:18 -0700)]
Revert "usb: pl2303: also use the divisor based baud rate encoding method for baud rates < 115200 with HX chips"

This reverts commit 61fa8d694b8547894b57ea0d99d0120a58f6ebf8.

Revert all of the pl2303 changes that went into 3.12-rc1 and -rc2 as
they cause regressions on some versions of the chip.  This will all be
revisited for later kernel versions when we can figure out how to handle
this in a way that does not break working devices.

Reported-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: Frank Schäfer <fschaefer.oss@googlemail.com>
Acked-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agoRevert "usb: pl2303: add two comments concerning the supported baud rates with HX...
Greg Kroah-Hartman [Fri, 1 Nov 2013 16:18:25 +0000 (09:18 -0700)]
Revert "usb: pl2303: add two comments concerning the supported baud rates with HX chips"

This reverts commit c23bda365dfbf56aa4d6d4a97f83136c36050e01.

Revert all of the pl2303 changes that went into 3.12-rc1 and -rc2 as
they cause regressions on some versions of the chip.  This will all be
revisited for later kernel versions when we can figure out how to handle
this in a way that does not break working devices.

Reported-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: Frank Schäfer <fschaefer.oss@googlemail.com>
Acked-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agoRevert "pl2303: simplify the else-if contruct for type_1 chips in pl2303_startup()"
Greg Kroah-Hartman [Fri, 1 Nov 2013 16:18:10 +0000 (09:18 -0700)]
Revert "pl2303: simplify the else-if contruct for type_1 chips in pl2303_startup()"

This reverts commit 73b583af597542329e6adae44524da6f27afed62.

Revert all of the pl2303 changes that went into 3.12-rc1 and -rc2 as
they cause regressions on some versions of the chip.  This will all be
revisited for later kernel versions when we can figure out how to handle
this in a way that does not break working devices.

Reported-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: Frank Schäfer <fschaefer.oss@googlemail.com>
Acked-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agoRevert "pl2303: improve the chip type information output on startup"
Greg Kroah-Hartman [Fri, 1 Nov 2013 16:17:50 +0000 (09:17 -0700)]
Revert "pl2303: improve the chip type information output on startup"

This reverts commit a77a8c23e4db9fb1f776147eda0d85117359c700.

Revert all of the pl2303 changes that went into 3.12-rc1 and -rc2 as
they cause regressions on some versions of the chip.  This will all be
revisited for later kernel versions when we can figure out how to handle
this in a way that does not break working devices.

Reported-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: Frank Schäfer <fschaefer.oss@googlemail.com>
Acked-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>