GitHub/LineageOS/android_kernel_motorola_exynos9610.git
14 years agonet: add a comment on netdev->last_rx
Eric Dumazet [Tue, 31 Aug 2010 07:40:16 +0000 (07:40 +0000)]
net: add a comment on netdev->last_rx

As some driver authors seem to reintroduce dev->last_rx use,
add a comment to strongly discourage this.

Since commit 6cf3f41e6c0 (bonding, net: Move last_rx update into bonding
recv logic), network drivers dont need to update last_rx themselves,
unless they use this field to implement a timeout.

Not updating last_rx helps not dirtying a cache line, improving
performance in SMP.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agopktgen: remove non used variable
Eric Dumazet [Tue, 31 Aug 2010 01:57:35 +0000 (01:57 +0000)]
pktgen: remove non used variable

remove non used variable "queue" in pg_cleanup

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agovlan: Use vlan_dev_real_dev in vlan_hwaccel_do_receive
Jiri Pirko [Tue, 31 Aug 2010 04:58:18 +0000 (04:58 +0000)]
vlan: Use vlan_dev_real_dev in vlan_hwaccel_do_receive

[patch net-next-2.6] vlan: Use vlan_dev_real_dev in vlan_hwaccel_do_receive

Use helper as in other places.

Signed-off-by: Jiri Pirko <jpirko@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agoPhonet: do not set POLLOUT in case of send buffer overflow
Rémi Denis-Courmont [Mon, 30 Aug 2010 12:57:05 +0000 (12:57 +0000)]
Phonet: do not set POLLOUT in case of send buffer overflow

Signed-off-by: Rémi Denis-Courmont <remi.denis-courmont@nokia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agoPhonet: correct sendmsg() error code from sock_alloc_send_skb()
Rémi Denis-Courmont [Mon, 30 Aug 2010 12:57:04 +0000 (12:57 +0000)]
Phonet: correct sendmsg() error code from sock_alloc_send_skb()

Signed-off-by: Rémi Denis-Courmont <remi.denis-courmont@nokia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agoPhonet: restore flow control credits when sending fails
Rémi Denis-Courmont [Mon, 30 Aug 2010 12:57:03 +0000 (12:57 +0000)]
Phonet: restore flow control credits when sending fails

Signed-off-by: Rémi Denis-Courmont <remi.denis-courmont@nokia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agostmmac: Fix build warnings.
David S. Miller [Tue, 31 Aug 2010 04:55:17 +0000 (21:55 -0700)]
stmmac: Fix build warnings.

In file included from drivers/net/stmmac/stmmac_ethtool.c:30:
drivers/net/stmmac/stmmac.h:111: warning: 'struct platform_device' declared inside parameter list
drivers/net/stmmac/stmmac.h:111: warning: its scope is only this definition or declaration, which is probably not what you want
drivers/net/stmmac/stmmac_main.c: In function 'stmmac_dvr_probe':
drivers/net/stmmac/stmmac_main.c:1744: warning: cast from pointer to integer of different size
In file included from drivers/net/stmmac/stmmac_mdio.c:31:
drivers/net/stmmac/stmmac.h:111: warning: 'struct platform_device' declared inside parameter list
drivers/net/stmmac/stmmac.h:111: warning: its scope is only this definition or declaration, which is probably not what you want
drivers/net/stmmac/dwmac1000_core.c: In function 'dwmac1000_dump_regs':
drivers/net/stmmac/dwmac1000_core.c:56: warning: cast from pointer to integer of different size

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agoipv6: struct xfrm6_tunnel in read_mostly section
Eric Dumazet [Mon, 30 Aug 2010 10:27:10 +0000 (10:27 +0000)]
ipv6: struct xfrm6_tunnel in read_mostly section

tunnel6_handlers chain being scanned for each incoming packet,
make sure it doesnt share an often dirtied cache line.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agonet: struct xfrm_tunnel in read_mostly section
Eric Dumazet [Mon, 30 Aug 2010 07:04:14 +0000 (07:04 +0000)]
net: struct xfrm_tunnel in read_mostly section

tunnel4_handlers chain being scanned for each incoming packet,
make sure it doesnt share an often dirtied cache line.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agonet/m68k: Hydra Ethernet - print whole resource instead of start address
Geert Uytterhoeven [Sun, 29 Aug 2010 21:43:46 +0000 (21:43 +0000)]
net/m68k: Hydra Ethernet - print whole resource instead of start address

resource_size_t changed from `unsigned long' to `phys_addr_t`, which is either
`u32' or `u64'.
Print the whole resource to remove the cast and to make it future-proof.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agoTCP: update initial windows according to RFC 5681
Gerrit Renker [Sun, 29 Aug 2010 19:27:34 +0000 (19:27 +0000)]
TCP: update initial windows according to RFC 5681

This updates the use of larger initial windows, as originally specified in
RFC 3390, to use the newer IW values specified in RFC 5681, section 3.1.

The changes made in RFC 5681 are:
 a) the setting now is more clearly specified in units of segments (as the
    comments  by John Heffner emphasized, this was not very clear in RFC 3390);
 b) for connections with 1095 < SMSS <= 2190 there is now a change:
    - RFC 3390 says that IW <= 4380,
    - RFC 5681 says that IW = 3 * SMSS <= 6570.

Since RFC 3390 is older and "only" proposed standard, whereas the newer RFC 5681
is already draft standard, it seems preferable to use the newer IW variant.

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agodccp ccid-3: use per-route RTO or TCP RTO as fallback
Gerrit Renker [Sun, 29 Aug 2010 19:23:14 +0000 (19:23 +0000)]
dccp ccid-3: use per-route RTO or TCP RTO as fallback

This makes RTAX_RTO_MIN also available to CCID-3, replacing the compile-time
RTO lower bound with a per-route tunable value.

The original Kconfig option solved the problem that a very low RTT (in the
order of HZ) can trigger too frequent and unnecessary reductions of the
sending rate.

This tunable does not affect the initial RTO value of 2 seconds specified in
RFC 5348, section 4.2 and Appendix B. But like the hardcoded Kconfig value,
it allows to adapt to network conditions.

The same effect as the original Kconfig option of 100ms is now achieved by

> ip route replace to unicast 192.168.0.0/24 rto_min 100j dev eth0

(assuming HZ=1000).

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agodccp ccid-2: Share TCP's minimum RTO code
Gerrit Renker [Sun, 29 Aug 2010 19:23:13 +0000 (19:23 +0000)]
dccp ccid-2: Share TCP's minimum RTO code

Using a fixed RTO_MIN of 0.2 seconds was found to cause problems for CCID-2
over 802.11g: at least once per session there was a spurious timeout. It
helped to then increase the the value of RTO_MIN over this link.

Since the problem is the same as in TCP, this patch makes the solution from
commit "05bb1fad1cde025a864a90cfeb98dcbefe78a44a"
       "[TCP]: Allow minimum RTO to be configurable via routing metrics."
available to DCCP.

This avoids reinventing the wheel, so that e.g. the following works in the
expected way now also for CCID-2:

> ip route change 10.0.0.2 rto_min 800 dev ath0

Luckily this useful rto_min function was recently moved to net/tcp.h,
which simplifies sharing code originating from TCP.

Documentation also updated (plus minor whitespace fixes).

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agotcp/dccp: Consolidate common code for RFC 3390 conversion
Gerrit Renker [Sun, 29 Aug 2010 19:23:12 +0000 (19:23 +0000)]
tcp/dccp: Consolidate common code for RFC 3390 conversion

This patch consolidates initial-window code common to TCP and CCID-2:
 * TCP uses RFC 3390 in a packet-oriented manner (tcp_input.c) and
 * CCID-2 uses RFC 3390 in packet-oriented manner (RFC 4341).

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agodccp ccid-2: Remove wrappers around sk_{reset,stop}_timer()
Gerrit Renker [Sun, 29 Aug 2010 19:23:11 +0000 (19:23 +0000)]
dccp ccid-2: Remove wrappers around sk_{reset,stop}_timer()

This removes the wrappers around the sk timer functions, since not much is
gained from using them: the BUG_ON in start_rto_timer will never trigger
since that function is called only if:

 * the RTO timer expires (rto_expire, and then timer_pending() is false);
 * in tx_packet_sent only if !timer_pending() (BUG_ON is redundant here);
 * previously in new_ack, after stopping the timer (timer_pending() false).

Removing the wrappers also clears the way for eventually replacing the
RTO timer with the icsk-retransmission-timer, as it is already part of the
DCCP socket.

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agodccp ccid-2: Use u32 timestamps uniformly
Gerrit Renker [Sun, 29 Aug 2010 19:23:10 +0000 (19:23 +0000)]
dccp ccid-2: Use u32 timestamps uniformly

Since CCID-2 is de facto a mini implementation of TCP, it makes sense to share
as much code as possible.

Hence this patch aligns CCID-2 timestamping with TCP timestamping.
This also halves the space consumption (on 64-bit systems).

The necessary include file <net/tcp.h> is already included by way of
net/dccp.h. Redundant includes have been removed.

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agotcp: Add TCP_USER_TIMEOUT socket option.
Jerry Chu [Fri, 27 Aug 2010 19:13:28 +0000 (19:13 +0000)]
tcp: Add TCP_USER_TIMEOUT socket option.

This patch provides a "user timeout" support as described in RFC793. The
socket option is also needed for the the local half of RFC5482 "TCP User
Timeout Option".

TCP_USER_TIMEOUT is a TCP level socket option that takes an unsigned int,
when > 0, to specify the maximum amount of time in ms that transmitted
data may remain unacknowledged before TCP will forcefully close the
corresponding connection and return ETIMEDOUT to the application. If
0 is given, TCP will continue to use the system default.

Increasing the user timeouts allows a TCP connection to survive extended
periods without end-to-end connectivity. Decreasing the user timeouts
allows applications to "fail fast" if so desired. Otherwise it may take
upto 20 minutes with the current system defaults in a normal WAN
environment.

The socket option can be made during any state of a TCP connection, but
is only effective during the synchronized states of a connection
(ESTABLISHED, FIN-WAIT-1, FIN-WAIT-2, CLOSE-WAIT, CLOSING, or LAST-ACK).
Moreover, when used with the TCP keepalive (SO_KEEPALIVE) option,
TCP_USER_TIMEOUT will overtake keepalive to determine when to close a
connection due to keepalive failure.

The option does not change in anyway when TCP retransmits a packet, nor
when a keepalive probe will be sent.

This option, like many others, will be inherited by an acceptor from its
listener.

Signed-off-by: H.K. Jerry Chu <hkchu@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agonet: fix datapath typo
Simon Horman [Mon, 30 Aug 2010 04:57:55 +0000 (21:57 -0700)]
net: fix datapath typo

Signed-off-by: Simon Horman <horms@verge.net.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agoIPVS: include net/ip6_checksum.h for csum_ipv6_magic
Stephen Rothwell [Sun, 29 Aug 2010 17:04:53 +0000 (17:04 +0000)]
IPVS: include net/ip6_checksum.h for csum_ipv6_magic

Fixes this build error:

net/netfilter/ipvs/ip_vs_core.c: In function 'ip_vs_nat_icmp_v6':
net/netfilter/ipvs/ip_vs_core.c:640: error: implicit declaration of function 'csum_ipv6_magic'

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Simon Horman <horms@verge.net.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agodrivers/net/atl1c: Remove double test
Julia Lawall [Sat, 28 Aug 2010 05:41:02 +0000 (05:41 +0000)]
drivers/net/atl1c: Remove double test

The nic_type field is compared to athr_l2c twice.

The sematic match that finds this problem is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@expression@
expression E;
@@

(
* E
  || ... || E
|
* E
  && ... && E
)
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agostarfire: use BUILD_BUG_ON for netdrv_addr_t
Akinobu Mita [Fri, 27 Aug 2010 19:08:45 +0000 (19:08 +0000)]
starfire: use BUILD_BUG_ON for netdrv_addr_t

Detect size mismatch for netdrv_addr_t at build time rather than
checking at module load time.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Ion Badulescu <ionut@badula.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: netdev@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agostarfire: use PCI_VDEVICE
Akinobu Mita [Fri, 27 Aug 2010 19:08:36 +0000 (19:08 +0000)]
starfire: use PCI_VDEVICE

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Ion Badulescu <ionut@badula.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: netdev@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agophonet: use for_each_set_bit
Akinobu Mita [Fri, 27 Aug 2010 19:08:26 +0000 (19:08 +0000)]
phonet: use for_each_set_bit

Replace open-coded loop with for_each_set_bit().

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: netdev@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agomlx4: use bitmap library
Akinobu Mita [Fri, 27 Aug 2010 19:08:13 +0000 (19:08 +0000)]
mlx4: use bitmap library

Replace loops calling set_bit() and clear_bit() with bitmap_set() and
bitmap_clear().

Unlike loops calling set_bit() and clear_bit(), bitmap_set() and
bitmap_clear() are not atomic. But this is ok.
Because the bitmap operations are protected by bitmap->lock
except for initialization of the bitmap in mlx4_bitmap_init().

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Roland Dreier <rolandd@cisco.com>
Cc: netdev@vger.kernel.org
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agoeconet: kill unnecessary spin_lock_init()
Akinobu Mita [Fri, 27 Aug 2010 16:41:56 +0000 (16:41 +0000)]
econet: kill unnecessary spin_lock_init()

The spinlock aun_queue_lock is initialized statically. It is unnecessary
to initialize by spin_lock_init() at module load time.

This is detected by the semantic patch.

// <smpl>
@def@
declarer name DEFINE_SPINLOCK;
identifier spinlock;
@@

DEFINE_SPINLOCK(spinlock);

@@
identifier def.spinlock;
@@

- spin_lock_init(&spinlock);
// </smpl>

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Julia Lawall <julia@diku.dk>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: netdev@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agoslip: Use net_device_stats from struct net_device
Tobias Klauser [Thu, 26 Aug 2010 22:12:08 +0000 (22:12 +0000)]
slip: Use net_device_stats from struct net_device

Use net_device->stats for stats instead of private variable copies in
struct slip. Use ndo_get_stat64 so the additions can be performed on a private
destination buffer.

Cc: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Acked-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agobnx2x: fix wrong return from bnx2x_trylock_hw_lock
Eric Dumazet [Fri, 27 Aug 2010 05:03:53 +0000 (22:03 -0700)]
bnx2x: fix wrong return from bnx2x_trylock_hw_lock

bnx2x_trylock_hw_lock() returns a bool :

true if succeeded to acquire the lock.
false in case of error.

-EINVAL is not an acceptable value, since its promoted to true.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Acked-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agogro: __napi_gro_receive() optimizations
Eric Dumazet [Fri, 27 Aug 2010 05:03:08 +0000 (22:03 -0700)]
gro: __napi_gro_receive() optimizations

compare_ether_header() can have a special implementation on 64 bit
arches if CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is defined.

__napi_gro_receive() and vlan_gro_common() can avoid a conditional
branch to perform device match.

On x86_64, __napi_gro_receive() has now 38 instructions instead of 53

As gcc-4.4.3 still choose to not inline it, add inline keyword to this
performance critical function.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
CC: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agostmmac: Make time functionality depend upon RTC_HCTOSYS_DEVICE
David S. Miller [Fri, 27 Aug 2010 03:32:02 +0000 (20:32 -0700)]
stmmac: Make time functionality depend upon RTC_HCTOSYS_DEVICE

Based upon a report by Stephen Rothwell.

Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agoqlcnic: PCI ID addition
Sritej Velaga [Thu, 26 Aug 2010 14:03:05 +0000 (14:03 +0000)]
qlcnic: PCI ID addition

Added PCI ID to board info.

Signed-off-by: Sritej Velaga <sritej.velaga@qlogic.com>
Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agoqlcnic: Fix driver load issue in FW hang
Anirban Chakraborty [Thu, 26 Aug 2010 14:02:52 +0000 (14:02 +0000)]
qlcnic: Fix driver load issue in FW hang

If there is a FW hang when the driver loads, it can not determine the FW operational
mode. Fix it by checking the FW state first before issuing any FW commands to
determine its capabilities and thereby detecting driver operational mode.

Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agoqlcnic: Fix missing error codes
Sony Chacko [Thu, 26 Aug 2010 14:02:41 +0000 (14:02 +0000)]
qlcnic: Fix missing error codes

In the original code, the error codes returned from some of the functions
are not caught and sent up the caller chain. Fixed it here.

Signed-off-by: Sony Chacko <sony.chacko@qlogic.com>
Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agonet: use scnprintf() to avoid potential buffer overflow
Changli Gao [Tue, 24 Aug 2010 13:32:58 +0000 (13:32 +0000)]
net: use scnprintf() to avoid potential buffer overflow

strlcpy() returns the total length of the string they tried to create, so
we should not use its return value without any check. scnprintf() returns
the number of characters written into @buf not including the trailing '\0',
so use it instead here.

Signed-off-by: Changli Gao <xiaosuo@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agonet/sctp: Use pr_fmt and pr_<level>
Joe Perches [Tue, 24 Aug 2010 13:21:08 +0000 (13:21 +0000)]
net/sctp: Use pr_fmt and pr_<level>

Change SCTP_DEBUG_PRINTK and SCTP_DEBUG_PRINTK_IPADDR to
use do { print } while (0) guards.
Add SCTP_DEBUG_PRINTK_CONT to fix errors in log when
lines were continued.
Add #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
Add a missing newline in "Failed bind hash alloc"

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agoipvs: switch to GFP_KERNEL allocations
Simon Horman [Thu, 26 Aug 2010 02:54:31 +0000 (02:54 +0000)]
ipvs: switch to GFP_KERNEL allocations

Switch from GFP_ATOMIC allocations to GFP_KERNEL ones in
ip_vs_add_service() and ip_vs_new_dest(), as we hold a mutex and are
allowed to sleep in this context.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agoIPVS: convert __ip_vs_securetcp_lock to a spinlock
Simon Horman [Thu, 26 Aug 2010 02:54:30 +0000 (02:54 +0000)]
IPVS: convert __ip_vs_securetcp_lock to a spinlock

Also rename __ip_vs_securetcp_lock to ip_vs_securetcp_lock.

Spinlock conversion was suggested by Eric Dumazet.

Acked-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agoIPVS: convert __ip_vs_sched_lock to a spinlock
Simon Horman [Thu, 26 Aug 2010 02:54:29 +0000 (02:54 +0000)]
IPVS: convert __ip_vs_sched_lock to a spinlock

Also rename __ip_vs_sched_lock to ip_vs_sched_lock.

Acked-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agoIPVS: ICMPv6 checksum calculation
Simon Horman [Thu, 26 Aug 2010 20:21:26 +0000 (13:21 -0700)]
IPVS: ICMPv6 checksum calculation

Cc: Xiaoyu Du <tingsrain@gmail.com>
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Simon Horman <horms@verge.net.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agobna: Fixed build break for allyesconfig
Rasesh Mody [Thu, 26 Aug 2010 06:00:27 +0000 (23:00 -0700)]
bna: Fixed build break for allyesconfig

This is the patch to fix the build break caused by multiple
definitions of symbols between Brocade's FC/FCOE driver(BFA)
and 10G Networking Driver(BNA).

Changes are:

1. locally used functions are made static

2. unused functions are removed

3. using unique namespaces for the function names that must be
globally visible

Signed-off-by: Debashis Dutt <ddutt@brocade.com>
Signed-off-by: Rasesh Mody <rmody@brocade.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agor6040: Free irq line on error path
Denis Kirjanov [Tue, 24 Aug 2010 23:57:55 +0000 (23:57 +0000)]
r6040: Free irq line on error path

Free irq line on error path.

Signed-off-by: Denis Kirjanov <dkirjanov@kernel.org>
Acked-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agos2io: remove lro parameter
Amerigo Wang [Wed, 25 Aug 2010 00:23:39 +0000 (00:23 +0000)]
s2io: remove lro parameter

Remove "lro" parameter of s2io driver.

Signed-off-by: WANG Cong <amwang@redhat.com>
Cc: jon.mason@exar.com
Acked-by: Jon Mason <jon.mason@exar.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agobe2net: stats for packets received due to internal switching in ASIC.
Ajit Khaparde [Wed, 25 Aug 2010 00:32:56 +0000 (00:32 +0000)]
be2net: stats for packets received due to internal switching in ASIC.

Counters for packets received due to internal switching are already available.
This change will start displaying them in ethtool -S

Signed-off-by: Ajit Khaparde <ajitk@serverengines.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agobe2net: fix to dynamically generate MAC Address for VFs
Ajit Khaparde [Wed, 25 Aug 2010 00:32:33 +0000 (00:32 +0000)]
be2net: fix to dynamically generate MAC Address for VFs

The BE ASIC/firmware doesnot reserve and assign MAC address for VFs.
This results in the VF interfaces being created with MAC Address 0.
The code change proposed takes the MAC address of PF to generate a seed.
MAC Address for VFs are assigned incrementally starting from the seed.
These addresses are programmed in the ASIC by the PF and the VF driver
queries for the MAC address during its probe.

Signed-off-by: Ajit Khaparde <ajitk@serverengines.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agobridge: avoid ethtool on non running interface
stephen hemminger [Tue, 24 Aug 2010 13:12:56 +0000 (13:12 +0000)]
bridge: avoid ethtool on non running interface

If bridge port is offline, don't call ethtool to query speed.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agoqlge: Fix a deadlock when the interface is going down
Breno Leitao [Tue, 24 Aug 2010 12:50:40 +0000 (12:50 +0000)]
qlge: Fix a deadlock when the interface is going down

Currently qlge can deadlock when the interface is going
down, and the mpi_port_cfg_work() is executing on another
processor. It happens because unregister_netdev() holds
the rtnl lock, and the mpi_port_cfg_work() also request
this lock.

Since unregiter_netdev() may wait mpi_port_cfg_work(), who
also request the holding lock, it can cause an deadlock,
displaying the following error:

 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
 rmmod         D 00000080c6c1d190     0  3993   2081 0x00008080
 Call Trace:
 [c000000975f56ee0] [c0000000000152a0] .__switch_to+0x100/0x1d0
 [c000000975f56f70] [c0000000005781b4] .schedule+0x3a4/0x8c0
 [c000000975f570c0] [c000000000578e8c] .schedule_timeout+0x24c/0x350
 [c000000975f571e0] [c000000000578a88] .wait_for_common+0x198/0x210
 [c000000975f572c0] [c0000000000abbb4] .__cancel_work_timer+0x2c4/0x2e0
 [c000000975f57400] [d0000000078e7a20] .ql_adapter_down+0x80/0x260 [qlge]
 [c000000975f574b0] [d0000000078e7d80] .qlge_close+0x70/0x130 [qlge]
 [c000000975f57540] [c000000000497ef8] .__dev_close+0x98/0xf0
 [c000000975f575d0] [c000000000497f74] .dev_close+0x24/0x60
 [c000000975f57650] [c000000000498080] .rollback_registered_many+0xd0/0x2b0
 [c000000975f576f0] [c000000000498338] .rollback_registered+0x38/0x50
 [c000000975f57780] [c0000000004983d8] .unregister_netdevice_queue+0x88/0xe0
 [c000000975f57810] [c000000000498574] .unregister_netdev+0x24/0x40
 [c000000975f57890] [d0000000078f6f38] .qlge_remove+0x3c/0x78 [qlge]
 [c000000975f57920] [c0000000002d9298] .pci_device_remove+0x48/0x90
 [c000000975f579a0] [c000000000372850] .__device_release_driver+0xa0/0x130
 [c000000975f57a30] [c000000000372a08] .driver_detach+0x128/0x150
 [c000000975f57ad0] [c000000000371134] .bus_remove_driver+0xc4/0x1a0
 [c000000975f57b70] [c00000000037357c] .driver_unregister+0x8c/0xd0
 [c000000975f57c00] [c0000000002d968c] .pci_unregister_driver+0x5c/0x110
 [c000000975f57ca0] [d0000000078f6ee4] .qlge_exit+0x1c/0x34 [qlge]

Signed-off-by: Breno Leitao <leitao@linux.vnet.ibm.com>
Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agobridge: fix locking comment
Stephen Hemminger [Tue, 24 Aug 2010 13:08:10 +0000 (13:08 +0000)]
bridge: fix locking comment

The carrier check is not called from work queue in current code.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agonet/netfilter/ipvs: Eliminate memory leak
Julia Lawall [Tue, 24 Aug 2010 04:39:49 +0000 (04:39 +0000)]
net/netfilter/ipvs: Eliminate memory leak

__ip_vs_service_get and __ip_vs_svc_fwm_get increment a reference count, so
that reference count should be decremented before leaving the function in an
error case.

A simplified version of the semantic match that finds this problem is:
(http://coccinelle.lip6.fr/)

// <smpl>
@r exists@
local idexpression x;
expression E;
identifier f1;
iterator I;
@@

x = __ip_vs_service_get(...);
<... when != x
     when != true (x == NULL || ...)
     when != if (...) { <+...x...+> }
     when != I (...) { <+...x...+> }
(
 x == NULL
|
 x == E
|
 x->f1
)
...>
* return ...;
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Simon Horman <horms@verge.net.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agodrivers/net/irda: Eliminate memory leak
Julia Lawall [Tue, 24 Aug 2010 04:38:33 +0000 (04:38 +0000)]
drivers/net/irda: Eliminate memory leak

dev_alloc_skb allocates some memory, so that memory should be freed before
leaving the function in an error case.

Corrected some typos in a nearby comment as well.

A simplified version of the semantic match that finds this problem is:
(http://coccinelle.lip6.fr/)

// <smpl>
@r exists@
local idexpression x;
expression E;
identifier f1;
iterator I;
@@

x = dev_alloc_skb(...);
<... when != x
     when != true (x == NULL || ...)
     when != if (...) { <+...x...+> }
     when != I (...) { <+...x...+> }
(
 x == NULL
|
 x == E
|
 x->f1
)
...>
* return ...;
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agotyphoon: fix a race in typhoon_do_get_stats
Eric Dumazet [Tue, 24 Aug 2010 04:18:13 +0000 (04:18 +0000)]
typhoon: fix a race in typhoon_do_get_stats

Its important to store 'final' values in counters,
not using them as temporary variables,
or this might break some SNMP applications.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Acked-by: David Dillow <dave@thedillows.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agoplip: remove superflous return
Dan Carpenter [Tue, 24 Aug 2010 02:01:05 +0000 (02:01 +0000)]
plip: remove superflous return

This return isn't reachable and it obscures the goto on the line before.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agostmmac: make ioaddr 'void __iomem *' rather than unsigned long
Giuseppe CAVALLARO [Mon, 23 Aug 2010 20:40:42 +0000 (20:40 +0000)]
stmmac: make ioaddr 'void __iomem *' rather than unsigned long

This avoids unnecessary casting and adds the ioaddr in the
private structure.
This patch also removes many warning when compile the driver.

Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agostmmac: remove dead option in the driver's Kconfig
Giuseppe CAVALLARO [Mon, 23 Aug 2010 20:40:41 +0000 (20:40 +0000)]
stmmac: remove dead option in the driver's Kconfig

This patch removes the CPU_SUBTYPE_ST40 dependency in the
driver's Kconfig.
In fact, this option has been removed in the commit:
 f96691872439ab2071171d4531c4a95b5d493ae5
as reported by Christian Dietrich.

Note that the driver remains tested on STM platforms, only.

Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agostmmac: fix_mac_speed is called during 10/100<->1000 speed changes
Pawel Moll [Mon, 23 Aug 2010 20:40:40 +0000 (20:40 +0000)]
stmmac: fix_mac_speed is called during 10/100<->1000 speed changes

This patch modifies the stmmac_adjust_link() function so the
fix_mac_speed() is called not only when link speed is changing
between 10 and 100 Mbps (as required in RMII mode) but also
for 1000 Mbps.

Signed-off-by: Pawel Moll <pawel.moll@st.com>
Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agobnx2x: small fix in stats handling
Eric Dumazet [Mon, 23 Aug 2010 19:44:08 +0000 (19:44 +0000)]
bnx2x: small fix in stats handling

Use a private variable to fold rx_dropped value, instead of shared
destination buffer, as it might break SNMP applications.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
CC: Eilon Greenstein <eilong@broadcom.com>
CC: Dmitry Kravkov <dmitry@broadcom.com>
Acked-By: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agodrivers/net: Remove address use from assignments of function pointers
Joe Perches [Mon, 23 Aug 2010 18:20:03 +0000 (18:20 +0000)]
drivers/net: Remove address use from assignments of function pointers

"foo = &function" is more commonly written "foo = function"

Done with coccinelle script:

// <smpl>
@r@
identifier f;
@@

f(...) { ... }

@@
identifier r.f;
@@

- &f
+ f
// </smpl>

drivers/net/tehuti.c used a function and struct with the
same name, the function was renamed.

Compile tested x86 only.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agoqlcnic: change reg name
Amit Kumar Salecha [Wed, 25 Aug 2010 04:03:05 +0000 (04:03 +0000)]
qlcnic: change reg name

Change QLCNIC_CRB_DEV_REF_COUNT to QLCNIC_CRB_DRV_ACTIVE to match
document.

Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agoqlcnic: fix fw recovery for PF
Amit Kumar Salecha [Wed, 25 Aug 2010 04:03:04 +0000 (04:03 +0000)]
qlcnic: fix fw recovery for PF

Privilege function should wait for npar state to be operational
before creating context.

Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agoqlcnic: support port vlan id
Amit Kumar Salecha [Wed, 25 Aug 2010 04:03:03 +0000 (04:03 +0000)]
qlcnic: support port vlan id

On NIC Partition capable adapter, Administrator can configure to
tag packet with particular vlan id. Packet will be tagged and strip with
that vlan id. Also if 'Tagging' flag is disable, other packet will be drop.

Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agoqlcnic: eswitch config fixes
Rajesh Borundia [Wed, 25 Aug 2010 04:03:02 +0000 (04:03 +0000)]
qlcnic: eswitch config fixes

o remove validation before deleting vlan id
o Add missing 'break' while deleting vlan id.

Signed-off-by: Rajesh Borundia <rajesh.borundia@qlogic.com>
Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agoMerge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wirel...
John W. Linville [Wed, 25 Aug 2010 18:51:42 +0000 (14:51 -0400)]
Merge branch 'master' of git://git./linux/kernel/git/linville/wireless-next-2.6 into for-davem

Conflicts:
drivers/net/wireless/libertas/if_sdio.c

14 years agomlx4_en: Fix build warning in mlx4_en_create_rx_ring.
David S. Miller [Tue, 24 Aug 2010 22:06:27 +0000 (15:06 -0700)]
mlx4_en: Fix build warning in mlx4_en_create_rx_ring.

drivers/net/mlx4/en_rx.c: In function ‘mlx4_en_create_rx_ring’:
drivers/net/mlx4/en_rx.c:305: warning: label ‘err_map’ defined but not used

Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agomlx4_en: updated driver version
Yevgeny Petrilin [Tue, 24 Aug 2010 03:46:49 +0000 (03:46 +0000)]
mlx4_en: updated driver version

Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agomlx4_en: Moving to work with GRO
Yevgeny Petrilin [Tue, 24 Aug 2010 03:46:46 +0000 (03:46 +0000)]
mlx4_en: Moving to work with GRO

Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agomlx4_en: UDP RSS support
Yevgeny Petrilin [Tue, 24 Aug 2010 03:46:42 +0000 (03:46 +0000)]
mlx4_en: UDP RSS support

Adding capability for RSS for UDP traffic, hashing is done based on
IP addresses and UDP port number.
The support depends on HW/FW capabilities.

Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agomlx4_en: reconfiguring mac address.
Yevgeny Petrilin [Tue, 24 Aug 2010 03:46:38 +0000 (03:46 +0000)]
mlx4_en: reconfiguring mac address.

When Mac address is removed from one port of the CX2 device, the other device
should reconfigure its Mac.
This fixes an issue with failover, when both ports have the same Mac address,
and one of the ports, is closed, the second one stops receiving traffic.
(bugzilla #1965 at bugs.openfabrics.org)

Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agomlx4_en: get/set ringsize uses actual ring size
Yevgeny Petrilin [Tue, 24 Aug 2010 03:46:34 +0000 (03:46 +0000)]
mlx4_en: get/set ringsize uses actual ring size

In case that the rings were not fully filled, the report in Ethtool
should be according to the actual size that was filled.

Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agomlx4_en: Fixing report in Ethtool get_settings
Yevgeny Petrilin [Tue, 24 Aug 2010 03:46:23 +0000 (03:46 +0000)]
mlx4_en: Fixing report in Ethtool get_settings

The report now based on query from FW, giving the correct tranciever type
and link speed.

Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agomlx4_en: Added self diagnostics test implementation
Yevgeny Petrilin [Tue, 24 Aug 2010 03:46:18 +0000 (03:46 +0000)]
mlx4_en: Added self diagnostics test implementation

The selftest includes 5 features:
1. Interrupt test: Executing commands and receiving command completion
   on all our interrupt vectors.
2. Link test: Verifying we are connected to valid link partner.
3. Speed test: Check that we negotiated link speed correctly.
4. Registers test: Activate HW health check command.
5. Loopback test: Send a packet on loopback interface and catch it on RX side.

Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agomlx4_en: Validate port up prior to transmitting
Yevgeny Petrilin [Tue, 24 Aug 2010 03:46:07 +0000 (03:46 +0000)]
mlx4_en: Validate port up prior to transmitting

We might try to use resources which were not activated.

Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agomlx4_en: Reporting link state with KERN_INFO
Yevgeny Petrilin [Tue, 24 Aug 2010 03:46:01 +0000 (03:46 +0000)]
mlx4_en: Reporting link state with KERN_INFO

Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agomlx4_en: Fixed MAX_TX_RINGS definition
Yevgeny Petrilin [Tue, 24 Aug 2010 03:45:54 +0000 (03:45 +0000)]
mlx4_en: Fixed MAX_TX_RINGS definition

Defined as sum of default number of TX rings and number of
rings used for priority flow control mode.

Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agomlx4_en: performing CLOSE_PORT at the end of tear-down process
Yevgeny Petrilin [Tue, 24 Aug 2010 03:45:45 +0000 (03:45 +0000)]
mlx4_en: performing CLOSE_PORT at the end of tear-down process

All port's resources should be closed before we give the
CLOSE_PORT command to the firmware.

Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agomlx4_en: Setting dev->perm_addr field
Yevgeny Petrilin [Tue, 24 Aug 2010 03:45:30 +0000 (03:45 +0000)]
mlx4_en: Setting dev->perm_addr field

Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agomlx4_en: Setting actual RX ring size
Yevgeny Petrilin [Tue, 24 Aug 2010 03:45:20 +0000 (03:45 +0000)]
mlx4_en: Setting actual RX ring size

When configuring HW resources, the RX ring size that is passed should be the actual
size that depends on number of buffers that we succeeded to allocate.
The mask for ring size should also be configured accordingly

Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agomlx4_en: Fixed incorrect unmapping on RX flow.
Yevgeny Petrilin [Tue, 24 Aug 2010 03:45:05 +0000 (03:45 +0000)]
mlx4_en: Fixed incorrect unmapping on RX flow.

When allocating new fragments to replace the ones that would be passed to the stack,
The fragments that should be replaced, are the ones that were already used.

Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agotc: add meta match on receive hash
Stephen Hemminger [Tue, 24 Aug 2010 21:48:10 +0000 (14:48 -0700)]
tc: add meta match on receive hash

Trivial extension to existing meta data match rules to allow
matching on skb receive hash value.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agoinclude/linux/if_ether.h: Remove unused #define MAC_FMT
Joe Perches [Tue, 24 Aug 2010 21:46:53 +0000 (14:46 -0700)]
include/linux/if_ether.h: Remove unused #define MAC_FMT

Last use was removed, so remove the #define.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agonet: ip_append_data() optim
Eric Dumazet [Tue, 24 Aug 2010 21:45:09 +0000 (14:45 -0700)]
net: ip_append_data() optim

Compiler is not smart enough to avoid a conditional branch.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agoMerge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wirel...
John W. Linville [Tue, 24 Aug 2010 20:35:40 +0000 (16:35 -0400)]
Merge branch 'master' of git://git./linux/kernel/git/linville/wireless-2.6

Conflicts:
drivers/net/wireless/iwlwifi/iwl-core.c
drivers/net/wireless/iwlwifi/iwl-core.h

14 years agocfg80211: add some documentation
Johannes Berg [Thu, 19 Aug 2010 14:11:27 +0000 (16:11 +0200)]
cfg80211: add some documentation

Add some documentation for cfg80211. I'm hoping some of
the regulatory documentation will be filled by somebody
more familiar with it, hint hint! :)

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
14 years agoiwlwifi: do not spuriously call ieee80211_scan_completed
Johannes Berg [Wed, 18 Aug 2010 16:35:22 +0000 (09:35 -0700)]
iwlwifi: do not spuriously call ieee80211_scan_completed

When a scan is aborted because the corresponding
virtual interface is removed, we may still later
attempt to tell mac80211 that the scan completed.
This is obviously wrong, since we already told it
that it was aborted, so don't do that.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
14 years agoiwlagn: do not check for AP mode for WEP keys
Johannes Berg [Wed, 18 Aug 2010 16:35:21 +0000 (09:35 -0700)]
iwlagn: do not check for AP mode for WEP keys

Even when we configure WEP keys in AP mode
ones without a station pointer are default
keys, so don't check for AP mode here.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
14 years agoath9k_htc: Add support for bluetooth coexistence.
Vivek Natarajan [Wed, 18 Aug 2010 14:27:49 +0000 (19:57 +0530)]
ath9k_htc: Add support for bluetooth coexistence.

Signed-off-by: Vivek Natarajan <vnatarajan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
14 years agoath9k_common: Move bt_stomp to common for sharing with ath9k_htc.
Vivek Natarajan [Wed, 18 Aug 2010 14:27:48 +0000 (19:57 +0530)]
ath9k_common: Move bt_stomp to common for sharing with ath9k_htc.

Signed-off-by: Vivek Natarajan <vnatarajan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
14 years agonl80211: some documentation fixes
Johannes Berg [Wed, 18 Aug 2010 15:44:36 +0000 (17:44 +0200)]
nl80211: some documentation fixes

The nl80211 documentation is currently never
generated, so problems have accumulated. Fix
most of the trivial ones.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
14 years agomac80211: fix docbook
Johannes Berg [Wed, 18 Aug 2010 13:01:23 +0000 (15:01 +0200)]
mac80211: fix docbook

Fix a small problem in the documentation for
ieee80211_request_smps, and a now erroneous
inclusion of enum ieee80211_key_alg, which no
longer exists after the change to ciphers.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
14 years agowl1251: wait for join command complete event
Grazvydas Ignotas [Tue, 17 Aug 2010 19:46:55 +0000 (22:46 +0300)]
wl1251: wait for join command complete event

Poll for join command completion instead of waiting blindly for 10
msecs. There is a timeout of 100 msecs, if the command doesn't complete
by then, we return an error code.

Based on wl1271 patch 99d84c1de8fdf5f9b09f07fdbc628857a040bf8b
by Luciano Coelho.

Signed-off-by: Grazvydas Ignotas <notasas@gmail.com>
Acked-by: Kalle Valo <kvalo@adurom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
14 years agowl1251: fix beacon filter table structure
Grazvydas Ignotas [Tue, 17 Aug 2010 19:46:54 +0000 (22:46 +0300)]
wl1251: fix beacon filter table structure

The beacon filter table configuration ACX structure had certain elements
reversed, fix it to match TI driver.

Based on wl1271 patch 1937e742639c03a6fe77239c3003ce9602302117 by
Juuso Oikarinen.

Signed-off-by: Grazvydas Ignotas <notasas@gmail.com>
Acked-by: Kalle Valo <kvalo@adurom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
14 years agowl1251: fix event handling mechanism
Grazvydas Ignotas [Tue, 17 Aug 2010 19:46:53 +0000 (22:46 +0300)]
wl1251: fix event handling mechanism

In case both A and B events occured simultaneously, current code
would only process A and clear both interrupts. Make it process both
events instead.

Based on wl1271 patches by Juuso Oikarinen:
1fd2794f36913992798184c464fe8f85753b13e0
13f2dc52c69bcca074cd12d4806953b2af45c386

Signed-off-by: Grazvydas Ignotas <notasas@gmail.com>
Acked-by: Kalle Valo <kvalo@adurom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
14 years agowl1251: add missing __packed modifier for some structs
Grazvydas Ignotas [Tue, 17 Aug 2010 19:46:52 +0000 (22:46 +0300)]
wl1251: add missing __packed modifier for some structs

Several acx and cmd structures are missing __packed modifier, add it.
This was noticed while comparing them with corresponding wl1271 code.

Signed-off-by: Grazvydas Ignotas <notasas@gmail.com>
Acked-by: Kalle Valo <kvalo@adurom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
14 years agoiwlwifi: move debug options into submenu
Jay Sternberg [Thu, 12 Aug 2010 19:15:55 +0000 (12:15 -0700)]
iwlwifi: move debug options into submenu

more debug options being added so it is useful to move them
into a submenu for ease of readability when using config commands
like make menuconfig and make xconfig

Signed-off-by: Jay Sternberg <jay.e.sternberg@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
14 years agoiwlwifi: enable experimental ucode support
Jay Sternberg [Thu, 12 Aug 2010 17:24:07 +0000 (10:24 -0700)]
iwlwifi: enable experimental ucode support

ucode firmware may need to be released as experimental for testing or
debugging. released ucode filenames have the API version as the last
component.  experimental ucode files will have that component be "exp"
and the fw_version string reported by ethtool will also contain the
string EXP to clearly identify this ucode from released ucode.
EXP is short for EXPERIMENTAL since fw_version has a max lenght on 32.

this capability is controlled by Kconfig and defaulted to not be used.

Signed-off-by: Jay Sternberg <jay.e.sternberg@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
14 years agoiwlwifi: remove unused iwl_send_card_state function
Wey-Yi Guy [Wed, 11 Aug 2010 14:30:20 +0000 (07:30 -0700)]
iwlwifi: remove unused iwl_send_card_state function

iwl_send_card_state() is not being call from anywhere, remove it.

Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
14 years agoiwlwifi: configurable ampdu factor and density
Wey-Yi Guy [Wed, 4 Aug 2010 19:02:43 +0000 (12:02 -0700)]
iwlwifi: configurable ampdu factor and density

Add ampdu factor and density to .cfg, this allow both parameters
can be configure per device based.

Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
14 years agoiwlwifi: more generic name for rssi calc in iwlagn
Wey-Yi Guy [Wed, 4 Aug 2010 15:42:17 +0000 (08:42 -0700)]
iwlwifi: more generic name for rssi calc in iwlagn

Change the define to more generic naming to match _agn devices
since the rssi calculation are common function for 5000 series and up

Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
14 years agoiwlwifi: additional parameter in REPLY_RX_PHY_CMD
Wey-Yi Guy [Wed, 4 Aug 2010 15:05:33 +0000 (08:05 -0700)]
iwlwifi: additional parameter in REPLY_RX_PHY_CMD

Adding additional parameter in REPLY_RX_PHY_CMD, frame_time indicate the
frame's time on the air based on byte count and frame rate calculation

Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
14 years agoiwlagn: continue perform rate scale when error detected
Wey-Yi Guy [Tue, 3 Aug 2010 15:23:32 +0000 (08:23 -0700)]
iwlagn: continue perform rate scale when error detected

If for some reason, the actual link command not matching neither
active nor search table; instead of return and not performing rate
scale, by-pass the data collection and continue the rate scale process.

Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
14 years agoiwlagn: adjust starting action for rate scale
Wey-Yi Guy [Sat, 31 Jul 2010 15:52:03 +0000 (08:52 -0700)]
iwlagn: adjust starting action for rate scale

During rate scale, reset starting action after making action adjustment
to avoid the possibility of break out of loop too early.

Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
14 years agoiwlwifi: refactor iwl_setup_rxon_timing
Johannes Berg [Thu, 29 Jul 2010 14:07:51 +0000 (07:07 -0700)]
iwlwifi: refactor iwl_setup_rxon_timing

All callers of iwl_setup_rxon_timing() also send
the command right away, so rename the function
to iwl_send_rxon_timing() and move the sending
into it. Also, some callers clear the data, this
can be done always and thus moved in as well.
Finally, there's no reason for the function to
acquire the spinlock, but it should be called
with the mutex held, so assert that.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
14 years agoiwlwifi: cleanup iwl_set_rxon_channel()
Shanyu Zhao [Wed, 28 Jul 2010 03:45:15 +0000 (20:45 -0700)]
iwlwifi: cleanup iwl_set_rxon_channel()

Update outdated comments of iwl_set_rxon_channel() to reflect the
current signature. Also remove the unnecessary validation of the
channel. Those channel info are constructed in iwlwifi driver
and mac80211 will never modify the content of the struct. Also
everytime before this function is called the channel info has
been validated already (as a paranoid check).

Signed-off-by: Shanyu Zhao <shanyu.zhao@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>