staging: xgifb: delete support for Chrontel 7005 TV output

IF_DEF_CH7005 is hard-coded to 0, so this is all just dead code that
can be deleted.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: xgifb: delete support for Chrontel 7017 TV output

IF_DEF_CH7017 is hard-coded to 0, so this is all just dead code that
can be deleted.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: xgifb: delete XGI_OpenCRTC()

Delete redundant function. Also eliminates the following sparse warning:

drivers/staging/xgifb/vb_setmode.c:8033:6: warning: symbol 'XGI_OpenCRTC' was not declared. Should it be static?

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: xgifb: use common init for module and built-in

Use a common init function for module and built-in driver.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

stating: xgifb: update module parameter descriptions

Remove incorrect/misleading text from parameter descriptions.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: xgifb: delete all references to mode "none"

Delete all references to mode "none". It should be handled like any
other invalid mode.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: xgifb: correct the default mode comment

According to the comment, the default mode should be 800x600x8 while
the index points actually to 800x600x16. Change the comment and move
the definition instead of changing the current behaviour.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: xgifb: simplify default mode setup

The default mode is the same regardless of the display type, except for
XG21/LCD which is determined dynamically.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: xgifb: fail the probe if no supported LCD video mode found

Fail the probe if the LCD resolution described in card firmware does
not match any of the supported modes.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: xgifb: delete duplicated default video mode setup code

The code for determining the default video mode is unnecessarily
duplicated in XGIfb_search_mode() and XGIfb_search_vesamode() functions.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: xgifb: assume the default video mode also when module

The same default video mode should be assumed regardless if the driver
is a module or not. This won't change the current behaviour, but it will
simplify further changes.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: xgifb: XGIfb_search_mode(): delete unreachable code

XGIfb_search_mode() is always called with a valid string pointer.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: xgifb: search video mode later in probe

When searching the video mode, some HW details needs to be
known. Therefore it's not possible to do that reliably before probe().

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: xgifb: fix LVDS LCD resolution data setup

If the driver fails to get LVDS LCD data from the firmware, it falls
back to using driver's hardcoded values. However, this is done too
early in the probe. The selected video mode index is not yet known,
and also in some cases it could be defaulting to -1 resulting in a read
outside the array. Fix this by moving the array lookup after the video
mode validation.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Reported-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: xgifb: check and report invalid option values

Check option values with kstrtoul(). This will also eliminate some
checkpatch warnings about simple_strtoul() usage.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: xgifb: XGIfb_setup(): delete redundant assignment

The global data is already initialized to zero.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: xgifb: XGIfb_setup(): clean up driver messages

Print options only if they are given. Delete other messages.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: xgifb: delete "off" option handling

It's possible to disable the built-in xgifb driver with the kernel
command line option:

video=xgifb:off

This is already handled by the generic framebuffer layer (fb_get_options()
will return TRUE resulting in init failure), so no need to process the
option in the driver.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: xgifb: delete duplicated code

Delete redundant branches for "mode" and "vesa" options.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: xgifb: fix ypan disable option

Setting any of the FB options will disable ypan as a side effect. It
should be disabled only by the "noypan" option.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: xgifb: delete unused module parameters and options

Delete parameters which have no effect.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: serqt_usb2: remove ssu100 from supported devices

The serqt_usb2 driver will not work properly with the ssu100 device
even though it claims to support it.  The ssu100 is supported by the
ssu100 driver in mainline so there is no need to have it claimed by
serqt_usb2.

Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging/easycap: fix mismatch in easycap_poll() mutex lock-unlock

In case if condition (kd != isdongle(peasycap)) becomes true,
easycap_poll() returns without releasing easycapdc60_dongle[kd].mutex_video.
The patch adds mutex_unlock() before that return.

Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Acked-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: et131x: Use phy-device, mii_bus and ethtool_ops

Adding some basic ethtool ops and supporting functionality using a phy device.

Signed-off-by: Mark Einon <mark.einon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: et131x: Remove module_param et131x_speed_set

Manual setting of speed/duplex will be achieved using ethtool.
Remove the driver specific module_param that also does this.

Signed-off-by: Mark Einon <mark.einon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: et131x: Remove redundant replica loopback code

A mechanism used to set the phy in loopback mode is not present in the driver, making associated checks and variables redundant. Removing them.

Signed-off-by: Mark Einon <mark.einon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: et131x: Remove unused xcvr_id in struct ce_stats

xcvr_id holds the phy ID which is stored but never used in the driver.

Signed-off-by: Mark Einon <mark.einon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

MAINAINERS: Add details for drivers/staging/et131x

Adding myself as a maintainer for this driver, as I appear to have been the only interested party for some time.
Not sure if Olaf Hartman is still interested? So will leave it up to him to add his name to the list.

Signed-off-by: Mark Einon <mark.einon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: et131x: Further tidy up of 131x_pci_setup()

* Removed unused bool variable.
* Eliminated mid-function returns, used gotos instead

Signed-off-by: Mark Einon <mark.einon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: netvsc: return negative error codes

There was a typo here and we changed the -ENOMEM into +ENOMEM.  The
error codes aren't used, so this is just a cleanup.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: mousevsc: Fix checkpatch errors and warnings

Fix checkpatch errors and warnings.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: vmbus: Fix checkpatch warnings in connection.c

Fix checkpatch warnings in connection.c.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: vmbus: Fix a checkpatch warning in ring_buffer.c

Fix a checkpatch warning in ring_buffer.c

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: vmbus: Get rid of an unnecessary check in vmbus_connect()

Get rid of an unnecessary check in vmbus_connect().

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: vmbus: Get rid of some dated/redundant comments

Get rid of some dated/redundant comments in vmbus_drv.c

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: vmbus: Fixup indentation in vmbus_acpi_add()

Fixup indentation in vmbus_acpi_add().

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: vmbus: Do not enable auto eoi

Linux interrupt handling code generates the eoi; don't enable auto eoi.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: vmbus: Get rid of vmbus_on_isr() by inlining the code

Get rid of vmbus_on_isr() by inlining the code.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: Fix a bug in vmbus_match()

The recent checkin that add a private pointer to hv_vmbus_device_id
introduced this bug in vmbus_match; fix it.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: vmbus: Properly deal with de-registering channel callback

Ensure that we correctly handle racing invocations of the channel callback
when the channel is being closed. We do this using the channel's inbound_lock.
A side-effect of this strategy is that we avoid repeatedly picking up this lock
as we drain the inbound ring-buffer.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: vmbus: Check before invoking the channel callback

When we close a channel, we set the corresponding callback function to NULL.
Check before invoking the channel callback.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: util: Adjust guest time in a process context

The current code was adjusting guest time in interrupt context; do this
in process context since we may have to initiate cross-processor
interrupts as part of setting time.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: util: Forcefully shutdown when shutdown is requested

When the host requests a "shutdown", make sure we shutdown!

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: storvsc: No need to copy from bounce buffer in case of a failure

No need to copy from bounce buffer in case of a failure; cleanup the code
accordingly.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: storvsc: In case of scsi errors offline the device

When we do get fatal errors from the host, offline the device since the
host has already tried all possible recovery actions.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: storvsc: Fix a typo

Fix a typo in a function name.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: storvsc: Fixup srb and scsi status for INQUIRY and MODE_SENSE

The current VHD handler on the Windows Host does not correctly handle
INQUIRY and MODE_SENSE commands with some options. Fixup srb_status
in these cases since the failure is not fatal.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: storvsc: Cleanup storvsc_drv.c after adding the contents of hyperv_storage.h

Cleanup storvsc_drv.c after adding the contents of hyperv_storage.h.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: storvsc: Add the contents of hyperv_storage.h to storvsc_drv.c

As part of further cleanup of storvsc, add the contents of hyperv_storage.h
to storvsc_drv.c and do the necessary adjustments.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: storvsc: Cleanup storvsc_drv.c after adding the contents of storvsc.c

Cleanup storvsc_drv.c after adding the contents of storvsc.c.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: storvsc: Include storvsc.c in storvsc_drv.c

As part of further cleanup of our storage drivers, include the content
of storvsc.c into storvsc_drv.c and delete storvsc.c and do the necessary
adjustments.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: storvsc: Optimize the bounce buffer handling in the "read" case

Optimize the bounce buffer handling in the "read" case.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: storvsc: Optimize bounce buffer handling for the "write" case

Optimize bounce buffer handling for the "write" case.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: blkvsc: Get rid of blkvsc_drv.c as this code is not used

Now that blkvsc driver is no longer needed, remove blkvsc_drv.c

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: storvsc: Handle IDE devices using the storvsc driver

Now, enable handling of all IDE devices by extending the storvsc
device id table to handle IDE guid. As part of this cleanup Kconfig
and Hyper-V Makefile to not build the IDE driver (blkvsc).

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: storvsc: Add code to handle IDE devices using the storvsc driver

Add code to handle IDE devices using the storvsc driver. The storvsc_probe()
is modified so that the storvsc driver can surface all disks presented to the
guest as scsi devices using generic upper level Linux scsi drivers.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: netvsc: Get rid of the refcnt field in struct netvsc_device

Get rid of the refcnt field in struct netvsc_device. We implement the following
logic to manage the life cycle of the device: If the device is being destroyed,
we do not allow any outgoing traffic. Furthermore, if the device is being
destroyed, we allow incoming traffic only to drain outgoing traffic. Note that
the driver may send some book keeping messages to the host not known to
upper level Linux code.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: netvsc: Get rid of release_inbound_net_device() by inlining the code

Get rid of release_inbound_net_device() by inlining the code.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: netvsc: Get rid of release_outbound_net_device() by inlining the code

Get rid of release_outbound_net_device() by inlining the code.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: netvsc: Prevent outgoing traffic when netvsc dev is destroyed

Prevent outgoing traffic when netvsc dev is destroyed.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: netvsc: Introduce state to manage the lifecycle of net device

Introduce state to manage the lifecycle of net device.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: netvsc: Cleanup alloc_net_device()

Cleanup alloc_net_device(); we can directly set the refcnt.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: netvsc: Inline the code for free_net_device()

Inline the code for free_net_device().

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: storvsc: Get rid of the reference counting in struct storvsc_device

Get rid of the reference counting in struct storvsc_device. We manage the lifecycle with
the following logic: If the device is marked for destruction, we dot allow any
outgoing traffic on the device. Incoming traffic is allowed only to drain pending
outgoing traffic. Note that while the upper level code in Linux deals with outstanding
I/Os, we may have situations on Hyper-V where some book keeping messages are sent out
that the upper level Linux code may not be aware of.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: storvsc: Get rid of final_release_stor_device() by inlining code

Get rid of final_release_stor_device() by inlining code.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: storvsc: Get rid of release_stor_device() by inlining the code

Get rid of release_stor_device() by inlining the code.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: storvsc: Prevent outgoing traffic when stor dev is being destroyed

Prevent outgoing traffic when stor dev is destroyed.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: storvsc: Introduce state to manage the lifecycle of stor device

Introduce state to manage the lifecycle of stor device. This would be the
basis for managing the references on the stor object.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: storvsc: Cleanup alloc_stor_device()

Cleanup alloc_stor_device(), we can set the ref_count directly.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: storvsc: Rename get_stor_device()

In preparation for cleaning up how we manage reference counts on the stor
device, clearly distinguish why we are attempting to acquire a reference.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: storvsc: Rename must_get_stor_device()

In preparation for cleaning up how we manage reference counts on the stor
device, clearly distinguish why we are attempting to acquire a reference.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: storvsc: Do not aquire an unnecessary reference on stor_device

On entry into storvsc_on_io_completion() we have already acquired a reference
on the stor_device; there is no need to acquire an additional reference here.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: storvsc: Inline free_stor_device()

Inline the code for  free_stor_device() and get rid of the function.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: rtl8192e: Fix array overrun

Smatch outputs the following message:

drivers/staging/rtl8192e/r8192E_cmdpkt.c +412 cmpk_message_handle_rx(70)
error: buffer overflow 'priv->stats.rxcmdpkt' 4 <= 7

   407                          RT_TRACE(COMP_CMDPKT, "---->cmpk_message_handle_rx():"
   408                                   "unknow CMD Element\n");
   409                          return 1;
   410                  }
   411
   412                  priv->stats.rxcmdpkt[element_id]++;
                                             ^^^^^^^^^^
->stats.rxcmdpkt[] only has 4 elements, but from the switch statement
in the section before we can see that element_id can go up to 7
(RX_TX_RATE_HISTORY).

Reported-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Merge 3.1-rc4 into staging-next

This resolves a conflict with:
drivers/staging/brcm80211/brcmsmac/types.h

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Linux 3.1-rc4

Merge branch 'pm-fixes' of git://git./linux/kernel/git/rafael/linux-pm

* 'pm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ARM: mach-shmobile: sh7372 LCDC1 suspend fix V2 (incremental)
  OMAP: omap_device: only override _noirq methods, not normal suspend/resume
  PM / Runtime: Correct documentation of pm_runtime_irq_safe()
  ARM: mach-shmobile: sh7372 LCDC1 suspend fix
  sh-sci / PM: Use power.irq_safe
  PM: Use spinlock instead of mutex in clock management functions

Merge branch 'fixes' of git://git./linux/kernel/git/ieee1394/linux1394-2.6

* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6:
  firewire: sbp2: fix panic after rmmod with slow targets

ARM: mach-shmobile: sh7372 LCDC1 suspend fix V2 (incremental)

This patch updates the recently submitted
"Associate the HDMI clock together with LCDC1 on sh7372"
to V2 with the following change:
 - Use lcdc1_device on AP4EVB to build properly.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>

All Arch: remove linkage for sys_nfsservctl system call

The nfsservctl system call is now gone, so we should remove all
linkage for it.

Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge branch 'drm-intel-fixes' of git://git./linux/kernel/git/keithp/linux-2.6

* 'drm-intel-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/keithp/linux-2.6:
  drm/i915: Fix wrong initializer for "locked" variable in assert_panel_unlocked
  i915: do not setup intel_backlight twice

Merge branch 'usb-linus' of git://git./linux/kernel/git/gregkh/usb-2.6

* 'usb-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (30 commits)
  USB: ftdi_sio: add Calao reference board support
  USB option driver K3765/K4505 avoid CDC_DATA interface
  USB: option: add YUGA device id to driver
  usb: s5p-ehci: fix a NULL pointer deference
  USB: EHCI: Do not rely on PORT_SUSPEND to stop USB resuming in ehci_bus_resume().
  USB option driver add PID of Huawei Vodafone K4605
  USB option driver add PID of Huawei Vodafone K3806
  xhci: Handle zero-length isochronous packets.
  USB: Avoid NULL pointer deref in usb_hcd_alloc_bandwidth.
  usb: musb: gadget: fix error path
  usb: gadget: f_phonet: unlock in error case
  usb: musb: blackfin: include prefetch head file
  usb: musb: tusb6010: fix compilation
  usb: gadget: renesas_usbhs: fix DMA build by including dma-mapping.h
  usb: musb: cppi: fix build errors due to DBG and missing musb variable
  usb: musb: ux500: replace missing DBG with dev_dbg
  usb: musb: ux500: set dma config for both src and dst
  usb: musb: fix oops on musb_gadget_pullup
  usb: host: ehci-omap: fix .remove and failure handling path of .probe(v1)
  usb: gadget: hid: don't STALL when processing a HID Descriptor request
  ...

Merge branch 'tty-linus' of git://git./linux/kernel/git/gregkh/tty-2.6

* 'tty-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6:
  omap-serial: Allow IXON and IXOFF to be disabled.
  TTY: serial, document ignoring of uart->ops->startup error
  TTY: pty, fix pty counting
  8250: Fix race condition in serial8250_backup_timeout().
  serial/8250_pci: delete duplicate data definition
  8250_pci: add support for Rosewill RC-305 4x serial port card
  tty: Add "spi:" prefix for spi modalias
  atmel_serial: fix atmel_default_console_device
  serial: 8250_pnp: add Intermec CV60 touchscreen device
  drivers/serial/ucc_uart.c: Fix compiler warning
  pch_uart: Set PCIe bus number using probe parameter
  serial: samsung: Fix build error

Merge branch 'driver-core-linus' of git://git./linux/kernel/git/gregkh/driver-core-2.6

* 'driver-core-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6:
  drivers:misc: ti-st: fix unexpected UART close
  drivers:misc: ti-st: free skb on firmware download
  drivers:misc: ti-st: wait for completion at fail
  drivers:misc: ti-st: reinit completion before send
  drivers:misc: ti-st: fail-safe on wrong pkt type
  drivers:misc: ti-st: reinit completion on ver read
  drivers:misc:ti-st: platform hooks for chip states
  drivers:misc: ti-st: avoid a misleading dbg msg
  base/devres.c: quiet sparse noise about context imbalance
  pti: add missing CONFIG_PCI dependency
  drivers/base/devtmpfs.c: correct annotation of `setup_done'
  driver core: fix kernel-doc warning in platform.c
  firmware: fix google/gsmi.c build warning

Merge branch 'staging-linus' of git://git./linux/kernel/git/gregkh/staging-2.6

* 'staging-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6:
  staging: tidspbridge: fix compilation on dsp clock functions
  staging: octeon-ethernet: Add missing #includes.
  Staging: zcache: signedness bug in tmem_get()
  staging: zcache: fix crash on high memory swap
  staging: brcm80211: SPARC build error fix
  staging: brcm80211: fix compile error on non-x86 archs since 3.0 kernel

staging: fix rts5139 depends & build

RTS5139 should depend on USB, not USB_SUPPORT, to fix build
errors.
USB_SUPPORT can be enabled for gadget-only support
or when PCI is not enabled.

ERROR: "usb_reset_endpoint" [drivers/staging/rts5139/rts5139.ko] undefined!
ERROR: "usb_kill_urb" [drivers/staging/rts5139/rts5139.ko] undefined!
ERROR: "usb_deregister_dev" [drivers/staging/rts5139/rts5139.ko] undefined!
ERROR: "usb_unlink_urb" [drivers/staging/rts5139/rts5139.ko] undefined!
ERROR: "usb_deregister" [drivers/staging/rts5139/rts5139.ko] undefined!
ERROR: "usb_register_dev" [drivers/staging/rts5139/rts5139.ko] undefined!
ERROR: "usb_free_coherent" [drivers/staging/rts5139/rts5139.ko] undefined!
ERROR: "usb_submit_urb" [drivers/staging/rts5139/rts5139.ko] undefined!
ERROR: "usb_sg_cancel" [drivers/staging/rts5139/rts5139.ko] undefined!
ERROR: "usb_find_interface" [drivers/staging/rts5139/rts5139.ko] undefined!
ERROR: "usb_sg_init" [drivers/staging/rts5139/rts5139.ko] undefined!
ERROR: "usb_register_driver" [drivers/staging/rts5139/rts5139.ko] undefined!
ERROR: "usb_alloc_coherent" [drivers/staging/rts5139/rts5139.ko] undefined!
ERROR: "usb_free_urb" [drivers/staging/rts5139/rts5139.ko] undefined!
ERROR: "usb_alloc_urb" [drivers/staging/rts5139/rts5139.ko] undefined!

Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Cc: Edwin Rong <edwin_rong@realsil.com.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: got rid of static function declarations in softmac phy

Code cleanup. Reshuffled functions so that the declarations were not necessary
anymore.

Reported-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: removed unused #ifdef sections

Reviewed-by: Arend van Spriel <arend@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: removed unused phy logging

Macro's were not used so they were removed.

Reviewed-by: Arend van Spriel <arend@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: removed NORADIO_ENAB() macro from softmac phy code

Code cleanup. Preprocessor constant EXT_CBALL was never defined so removed
related code.

Reviewed-by: Arend van Spriel <arend@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: bugfix for 32 bit power pc platform

On some platforms resource_size_t == 64 but but unsigned long is only 32-bits.
In this particular problem, reported and fixed by Tony Breeds, a physical
address was truncated as a result.

Reported-by: Tony Breeds <tony@bakeyournoodle.com>
Reviewed-by: Arend van Spriel <arend@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: assigned physical addresses in dma.c correct type

Code cleanup. Physical addresses in dma.c are all allocated by calls to
pci_alloc_consistent(). Since that call returns physical addresses as
type 'dma_addr_t', all physical addresses in dma.c were changed from
'unsigned long' to 'dma_addr_t'.

Reviewed-by: Arend van Spriel <arend@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: removed unused code in dma.c

Code cleanup. Preprocessor symbol BCMDMASGLISTOSL was never defined.

Reviewed-by: Arend van Spriel <arend@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: remove brcmf_find_msb() function

This function is similar to ffs() wihch is provided by the linux
kernel already. This patch replaces brcmf_find_msb() with ffs().

Reported-by: Johannes Berg <johannes@sipsolutions.net>
Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: rename key endian conversion functions

The key endian conversion functions in wl_cfg80211.c have been
renamed as the old names were misleasing.

Reported-by: Johannes Berg <johannes@sipsolutions.net>
Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: remove macro definitions from brcmfmac Makefile

The Makefile for the brcmfmac driver contains macro definitions that
are always set. This patch removes those definitions from the Makefile
and source code.

Reported-by: Johannes Berg <johannes@sipsolutions.net>
Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: remove usage of macro WL11N_20MHZONLY

The macro WL11N_20MHZONLY is never defined so code #ifdef'ed by
it has been removed.

Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: remove macro definitions from brcmsmac Makefile

The Makefile for the brcmsmac driver contains macro definitions that
are always set and even some are not used in the source code anymore.
This patch removes those definitions from the Makefile and source code.

Reported-by: Johannes Berg <johannes@sipsolutions.net>
Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: remove unused definition flag from top Makefile

The use of the definition BCMDMA32 was already removed from the
source code, but it was still defined in the top-level Makefile.
This patch removes it.

Reported-by: Johannes Berg <johannes@sipsolutions.net>
Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Merge git://git./linux/kernel/git/lwfinger/r8192E into staging-next

* git://git.kernel.org/pub/scm/linux/kernel/git/lwfinger/r8192E: (25 commits)
  rtl8192e: update for ndo_set_multicast_list removal.
  staging: rtl8192e: Add endian checking switch to Makefile
  staging: rtl8192e: Fix sparse (non-endian) warnings - Part II
  staging: rtl8192e: Fix sparse (non-endian) messages - Part I
  staging: rtl8192e: Remove MAC_FMT and MAC_ARG for %pM
  staging: rtl8192e: Cleanup checkpatch -f warnings and errors - Part XVIII
  staging: rtl8192e: Cleanup checkpatch -f warnings and errors - Part XVII
  staging: rtl8192e: Cleanup checkpatch -f warnings and errors - Part XVI
  staging: rtl8192e: Cleanup checkpatch -f warnings and errors - Part XV
  staging: rtl8192e: Cleanup checkpatch -f errors - Part XIV
  staging: rtl8192e: Cleanup checkpatch -f errors - Part XIII
  staging: rtl8192e: Cleanup checkpatch -f warnings and errors - Part XII
  staging: rtl8192e: Cleanup checkpatch -f warnings and errors - Part XI
  staging: rtl8192e: Cleanup checkpatch -f errors - Part X
  staging: rtl8192e: Cleanup checkpatch -f warnings and errors - Part IX
  staging: rtl8192e: Cleanup checkpatch -f warnings and errors - Part VIII
  staging: rtl8192e: Cleanup checkpatch -f warnings and errors - Part VII
  staging: rtl8192e: Cleanup checkpatch -f warnings and errors - Part VI
  staging: rtl8192e: Cleanup checkpatch -f warnings and errors - Part V
  staging: rtl8192e: Cleanup checkpatch -f warnings and errors - Part IV
  ...