staging: comedi: Kconfig: COMEDI_NI_ATMIO doesn't need to depend on ISAPNP

The COMEDI_NI_ATMIO configuration option causes the "ni_atmio" module to
be built, which handles various National Instruments ISA-PNP data
acquisition cards.  The configuration option currently depends on
ISAPNP.

The "ni_atmio" module is a "legacy" comedi driver with no
auto-configuration support and it doesn't register as a PNP card driver.
The only difference in initialization from the other comedi ISA card
drivers is that it will use the ISA-PNP functions to find, attach and
activate the card if no I/O base address has been specified by the user
in the COMEDI_DEVCONFIG ioctl.

The module compiles fine without the ISAPNP configuration option as the
<linux/isapnp.h> and <linux/pnp.h> headers provide dummy inline
functions if the ISAPNP and PNP options, respectively, are not enabled.

Remove the dependancy on the ISAPNP option since the module builds
without it and can be used without it.

(There is a very slim chance that comedi will support proper ISA PNP
drivers one day, in which case the ni_atmio driver could be converted to
use this support and not support manual configuration.  However, not all
the PnP IDs of boards supported by this driver are currently known to
us.)

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: Kconfig: COMEDI_NI_ATMIO16D should not depend on ISAPNP

The COMEDI_NI_ATMIO16D configuration option causes the "ni_atmio16d"
module to be built, which handles the National Instruments AT-MIO-16 and
AT-MIO-16D cards.  The configuration option currently depends on ISAPNP,
but the module doesn't use any ISAPNP functions and the cards are legacy
ISA cards with base I/O port, IRQ and DMA channel configured by jumpers.
(The driver doesn't use DMA though.)

Remove the ISADNP dependancy from COMEDI_NI_ATMIO16D and fix up the help
text - the card names are missing a dash and they're not ISA-PNP.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: dt9812: Resolves sparse endian warnings.

Resolves warnings from the "sparse" checker of the form "warning: cast to
restricted __le??".

Signed-off-by: Shaun Laing <shaun@xresource.ca>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: xillybus: Multiple definition of xillyname resolved (bug fix)

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Eli Billauer <eli.billauer@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: xillybus: force to be a module

As reported, this driver causes problems when built into the kernel, so
force it to be a module until those issues are fixed.

Also delete the "default n" lines in the Kconfig, as they are not
needed.

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Eli Billauer <eli.billauer@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: New driver: Xillybus generic interface for FPGA

This is the driver for Xillybus, which is a general-purpose interface for
data communication with FPGAs (programmable logic). Please refer to the
README included in this patch for a detailed explanation.

It was previously submitted for misc-devices, but it appears like noone's
willing to review the code (which I can understand, given its magnitude).
Hence submitted as a staging driver.

Signed-off-by: Eli Billauer <eli.billauer@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: ozwpan: Fix coding style.

This patch fixes coding style issues reported by Dan here:-
http://driverdev.linuxdriverproject.org/pipermail/driverdev-devel/2012-June/027767.html

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Rupesh Gujare <rupesh.gujare@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: remove dead code DBG_PORT80/VIAWET_DEBUG

DBG_PORT80 is always defined as empty macro
because VIAWET_DEBUG is never defined. Remove
it and VIAWET_DEBUG.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: Remove dead code macro ASSERT

ASSERT is always defined as empty macro
because VIAWET_DEBUG is never defined.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: zram: Add auto loading of module if user opens /dev/zram.

Greg spotted that said driver is not subscribing to the automagic
mechanism of auto-loading if a user tries to open /dev/zram.

This fixes it.

CC: Minchan Kim <minchan@kernel.org>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: olpc_dcon: change to msleep to usleep_range

The resolution of msleep is related to HZ, so with HZ set to
100 any msleep of less then 10ms will become ~10ms. This is
not what we want. Use usleep_range to get more control of
what is happening here.

Signed-off-by: Jens Frederich <jfrederich@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: dwc2: Don't touch the dma_mask when dma is disabled

There was some code that cleared the dma_mask when dma was disabled in
the driver. Given that clearing the mask doesn't actually tell the usb
core we're not using dma, and a previous commit explicitely sets the
hcd->self.uses_dma value, it seems these values are unneeded and can
only potentially cause problems (when reloading a module, for example).

Signed-off-by: Matthijs Kooijman <matthijs@stdin.nl>
Acked-by: Paul Zimmerman <Paul.Zimmerman@synopsys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/imx: kill firstopen callback

This thing seems to do some kind of delayed setup. Really, real kms
drivers shouldn't do that at all. Either stuff needs to be dynamically
hotplugged or the driver setup sequence needs to be fixed.

This patch here just moves the setup at the very end of the driver
load callback, with the locking adjusted accordingly.

v2: Also move the corresponding put from ->lastclose to ->unload.

Cc: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

imx-drm: ipu-common: Add MODULE_ALIAS

Add MODULE_ALIAS, so that auto module loading can work.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

imx-drm: ipu-common: Check the return value from clk_prepare_enable()

clk_prepare_enable() may fail, so let's check its return value and propagate it
in the case of error.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

imx-drm: ipu-common: Simplify the error path

Instead of jumping to goto labels, just return the error code directly.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

imx-drm: imx-tve: Remove unneeded check for platform_get_resource()

As devm_ioremap_resource() is used on probe, there is no need to explicitly
check the return value from platform_get_resource(), as this is something that
devm_ioremap_resource() takes care by itself.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

imx-drm: TODO: Remove LVDS support from missing features list.

LVDS Display Bridge is currently supported, so remove it from the missing
features list.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

imx-drm: imx-tve: Provide __acquires/__releases annotation

Fix the following sparse warnings:

drivers/staging/imx-drm/imx-tve.c:133:13: warning: context imbalance in 'tve_lock' - wrong count at exit
drivers/staging/imx-drm/imx-tve.c:139:13: warning: context imbalance in 'tve_unlock' - unexpected unlock

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

imx-drm: ipu-dp: Introduce IPUV3_NUM_FLOWS

IPUv3 has a total of 3 flows (one synchronous flow and 2 asynchronous flows).

Let's add a definition for such number in order to let the code easier to
understand.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

imx-drm: ipu-dp: Remove unneeded braces

No need to have braces for a single line 'if' block

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

imx-drm: ipu-dp: Check the return value of devm_kzalloc()

devm_kzalloc() may fail, so let's check its return value.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

imx-drm: imx-drm-core: Export imx_drm_encoder_get_mux_id

When building imx_v6_v7_defconfig with imx-drm drivers selected as modules, we
get the following build error:

ERROR: "imx_drm_encoder_get_mux_id" [drivers/staging/imx-drm/imx-ldb.ko] undefined!

Export the required function to avoid this problem.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: Add missing #include <linux/slab.h>

sparc64 allmodconfig:

drivers/staging/comedi/drivers/addi_apci_2032.c: In function 'apci2032_auto_attach':
drivers/staging/comedi/drivers/addi_apci_2032.c:328:3: error: implicit declaration of function 'kzalloc' [-Werror=implicit-function-declaration]
drivers/staging/comedi/drivers/addi_apci_2032.c:328:11: warning: assignment makes pointer from integer without a cast [enabled by default]
drivers/staging/comedi/drivers/addi_apci_2032.c: In function 'apci2032_detach':
drivers/staging/comedi/drivers/addi_apci_2032.c:350:3: error: implicit declaration of function 'kfree' [-Werror=implicit-function-declaration]

drivers/staging/comedi/drivers/amplc_pci224.c: In function 'pci224_attach_common':
drivers/staging/comedi/drivers/amplc_pci224.c:1289:2: error: implicit declaration of function 'kmalloc' [-Werror=implicit-function-declaration]
drivers/staging/comedi/drivers/amplc_pci224.c:1289:23: warning: assignment makes pointer from integer without a cast [enabled by default]
drivers/staging/comedi/drivers/amplc_pci224.c:1296:24: warning: assignment makes pointer from integer without a cast [enabled by default]
drivers/staging/comedi/drivers/amplc_pci224.c:1303:25: warning: assignment makes pointer from integer without a cast [enabled by default]
drivers/staging/comedi/drivers/amplc_pci224.c:1348:42: warning: assignment makes pointer from integer without a cast [enabled by default]
drivers/staging/comedi/drivers/amplc_pci224.c: In function 'pci224_detach':
drivers/staging/comedi/drivers/amplc_pci224.c:1474:3: error: implicit declaration of function 'kfree' [-Werror=implicit-function-declaration]

Introduced by commit 0bdab509bf9c6d838dc0a3b1d68bbf841fc20b5a ("staging:
comedi: use comedi_alloc_devpriv()"), which removed some inclusions of
<linux/slab.h>.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ii_pci20kc: cleanup final pieces

Tidy up the multi-line comments at the beginning of the file and
remove any irrelevant information.

Fix the II20K_ID_PCI200341M_1 define, there are one to many 0's.

Rename all the remaining pci20xxx_* to ii20k_*. The "pci" just adds
confusion, this is not a PCI board.

Remove the private (*detach) function. It's safe to call the comedi
core provided comedi_legacy_detach() even if there is nothing to
cleanup.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ii_pci20kc: cleanup the ai subdevice

The PCI-200341M-1 module can both provide an analog input subdevice
in this driver. The module provides four differential input channels
with four programmable gains.

Currently the gain is configured as an option passed when the board
is attached. Rewrite the ai subdevice support functions to properly
handle the programmable gain.

For aesthetics, redefine the memory map for the module.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ii_pci20kc: cleanup the ao subdevice

The PCI-20006M-1 and PCI-20006M-2 modules can both provide an
analog output subdevice in this driver. Fix the module init code
to detect both of them.

The analog output can support +/-5, 0-10, or +/-10 volt ranges
depending on jumpers on the board. Report all the ranges to the
user instead of relying on the configuration options to set the
range. The user can then select the appropriate range depending
on how they have configured the hardware.

Tidy up the (*insn_{read,write})() functions to work like the
comedi core expects.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ii_pci20kc.c: break up the subdevice private data union

The union used for the subdevice private data just adds confusion.
Split the union into two separate private data structs.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ii_pci20kc.c: remove 'iobase' from the subdevice private data

The 'iobase' can be calculated when needed. Remove it from the
subdevice private data.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ii_pci20kc.c: tidy up the subdevice module init

Use the carrier board id to determine if a module is installed for
a given subdevice.

Consolidate the module init code into ii20k_init_module().

For aesthetic reasons, rename the subdevice functions to remove
'pci' from them.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ii_pci20kc.c: cleanup the dio subdevice

For asethetics, redefine the register map for the carrier board.
The 'PCI*' names lead one to think this is a PCI board not a
legacy ISA board.

Remove the #if 0'd out pci20xxx_{do,di}() functions. They are not
needed.

Rename, and fix, the pci20xxx_dio_config() function. The control
and direction registers are not readable. Use the new register map
defines instead of the crazy bit shifts.

Rename, and fix, the pci20xxx_dio_insn_config() function. This
function should treat data[0] as the 'instruction' to handle not
just use it to determine if the port is an input or output.

Rename, and tix, the pci20xxx_dio_insn_bits() function. The 'state'
only needs to be updated if the 'mask' indicates.

For aesthetics, abosrb the pci20xxx_dio_init() into the (*attach)
function.

Fix the carrier board id detect in the (*attach). There are two carrier
board types, one with 32 dio channels and one without. Use this info
when setting up the dio subdevice.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ii_pci20kc: remove CHAN macro

This macro is not used, and it looks to much like the comedi CR_CHAN
macro. Just remove it.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ii_pci20kc: move comedi_lrange tables

For aesthetic reasons, move the static const data to the head of
the file.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ii_pci20kc: remove forward declarations 3

Move a couple functions to remove the need for the last forward
declarations.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ii_pci20kc: remove forward declarations 2

Move the pci20xxx_dio_*() functions to remove the need for some of
the forward declarations.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ii_pci20kc: remove forward declarations 1

Move the pci20xxx_attach() and pci20xxx_detach() functions to remove
the need for some of the forward declarations.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ii_pci20kc: use comedi_alloc_spriv()

For aesthetic reasons, use the helper function to allocate the
subdevice private data instead of hanging it on the device
private data. The core will free the memory during the detach.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: addi_common.h: cleanup after removal of addi_apci_1710

Now that the addi_apci_1710 driver has been removed, get rid of all the
unnecessary stuff in addi_common.h.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: addi_apci_1710: delete driver

This driver is seriously broken and most of it does not "work" with
the comedi API. Just remove it.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: addi_apci_1710: separate from addi_common.h

Move the necessary bits from addi_common.h to remove it's dependency
and make this driver standalone.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: addi_apci_1710: fix some compile errors/warnings

Fix a couple comments within comments errors.

Remove the #include of eddi_eeprom.c. This driver does not use it.

Remove an unused local variable.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adv_pci1724: remove ao_range_list_1724

All the AO channels have the same ranges. Remove the subdevice
s->range_table_list and just use the s->range_table to setup the
ranges.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: range: tidy up comedi_check_chanlist()

The only difference in the if() and else if() check of the chanlist
is the source of the range table length. Consolidate the checks to
make the function a bit more concise.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: usbdux: tidy up usbdux_ao_cancel()

Rename the local variable used for the private data pointer to the
comedi "norm".

Remove the unnecessary sanity check of the private data pointer. This
function can only be called is the private data was allocated during
the attach.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: usbdux: tidy up usbdux_ao_stop()

For aesthetic reasons, pass the comedi_device pointer to this function
instead of the private data pointer. Rename the local variable used
for the private data pointer to the comedi "norm".

Remove the unnecessary sanity check of the private data pointer. This
function can only be called is the private data was allocated during
the attach.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: usbdux: tidy up usbdux_ai_cancel()

Rename the local variable used for the private data pointer to the
comedi "norm".

Remove the unnecessary sanity check of the private data pointer. This
function can only be called is the private data was allocated during
the attach.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: usbdux: tidy up usbdux_ai_stop()

For aesthetic reasons, pass the comedi_device pointer to this function
instead of the private data pointer. Rename the local variable used
for the private data pointer to the comedi "norm".

Remove the unnecessary sanity check of the private data pointer. This
function can only be called is the private data was allocated during
the attach.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: usbdux: make private data flags bit-fields

Change the flags in the private data to bit-fields to save a bit of
space.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: usbdux: remove 'ifnum' from the private data

The 'ifnum' is only used during the attach of the device. Remove it
from the private data.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: usbdux: remove usb_device back pointer from private data

The usb_device can be found when needed using the comedi_to_usb_dev()
helper. Use that instead the remove the back pointer from the private
data.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: usbdux: pass comedi_device pointer to usbdux_alloc_usb_buffers()

For aesthetic reasons, pass the comedi_device pointer to this function
instead of the private data pointer.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: usbdux: tidy up receive_dux_commands()

For aesthetic reasons, pass the comedi_device pointer to this function
instead of the private data pointer. Rename the local variable used
for the private data pointer to the comedi "norm".

Add a local variable for the usb_device pointer to tidy up the
usb_bulk_msg() call.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: usbdux: tidy up send_dux_commands()

For aesthetic reasons, pass the comedi_device pointer to this function
instead of the private data pointer. Rename the local variable used
for the private data pointer to the comedi "norm".

Add a local variable for the usb_device pointer to tidy up the
usb_bulk_msg() call.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: usbdux: remove 'interface' from private data

This back pointer is only used for a couple dev_printk() messages and
during the detach.

For the dev_printk() we can use the dev->class_dev. In the detach we
can get the usb_interface from the comedi_device.

Do that and remove the back pointer from the private data.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: usbdux: remove 'comedidev' from private data

This back pointer is no longer needed by the driver. Remove it.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: usbdux: tidy up usbduxsub_submit_pwm_urbs()

Pass the comedi_device pointer (the urb context) to this function
instead of the private data pointer.

Use a local variable for the urb pointer that is setup and submitted.

Remove the sanity check of the private data. This function can only
get called if the allocation was successful during the attach.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: usbdux: tidy up usbduxsub_submit_outurbs()

Pass the comedi_device pointer (the urb context) to this function
instead of the private data pointer.

Use a local variable for the urb pointers that are setup and submitted.

Remove the sanity check of the private data. This function can only
get called if the allocation was successful during the attach.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: usbdux: tidy up usbduxsub_submit_inurbs()

Pass the comedi_device pointer (the urb context) to this function
instead of the private data pointer.

Use a local variable for the urb pointers that are setup and submitted.

Remove the sanity check of the private data. This function can only
get called if the allocation was successful during the attach.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: usbdux: remove dev_printk() noise

Most of these are just function trace noise. The rest report errors
that the user can't do anything about so they amount to added noise.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: usbdux: tidy up the comedi_lrange tables

Cleanup the whitespace in the tables.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: usbdux: remove the SUBDEV_* defines

These defines are only used to index the dev->subdevices array
during the attach. It's cleaner to just open-code the values.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: usbdux: tidy up usbduxsub_pwm_irq()

Rename the local variables to the comedi "norm".

Use dev->class_dev as the device for all dev_printk() messages.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: usbdux: tidy up usbduxsub_ao_isoc_irq()

Rename the local variables to the comedi "norm".

The comedi_subdevice in this function is actually the dev->write_subdev
that was initialized in the attach. Use that instead of accessing the
dev->subdevices array directly.

Use dev->class_dev as the device for all dev_printk() messages.

Instead of using the 'comedidev' back pointer in the private data, use
the comedi_device 'dev' that we already have.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: usbdux: tidy up usbduxsub_ai_isoc_irq()

Rename the local variables to the comedi "norm".

The comedi_subdevice in this function is actually the dev->read_subdev
that was initialized in the attach. Use that instead of accessing the
dev->subdevices array directly.

Use dev->class_dev as the device for all dev_printk() messages.

Instead of using the 'comedidev' back pointer in the private data, use
the comedi_device 'dev' that we already have.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: usbdux: absorb usbdux_attach_common into caller

This function is only called by usbdux_auto_attach(), absorb it.

Also, there is no reason to down/up the semaphore during the attach.
None of the subdevices are functioning yet so there are no commands
being sent to the usb device.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: usbdux: tidy up usbdux_attach_common()

Rename the local variable used for the device private data.

Move the setting of the device private data 'comedidev' to the
(*auto_attach) where the other back pointers are set.

Tidy up the subdevice init by removing the unnecessary comments
and adding some whitespace.

Remove the unnecessary dev_info() after a sucessful attach.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: usbdux: remove NOISY_DUX_DEBUGBUG

This define enables printing of the 'dux_commands' that is sent to
the usb device in send_dux_commands(). This type of development
debug should not be left in the final driver.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: usbdux: cleanup the (*detach)

The tidy_up() function is only called by the (*detach). That function
unlinks any running urbs and frees all the allocated urbs and buffers
used by the driver.

Rename tidy_up() to usbdux_free_usb_buffers() and move all the parts
that don't deal with the freeing of the buffers directly into the
(*detach).

Also, remove all the unnecessary clearing of the pointers. The comedi
core will kfree() the private data after calling the (*detach).

Foe aesthetic reasons, do the kfree()'ing of the buffers and urbs in
the reverse order that they were allocated.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: usbdux: remove unnecessary tidy_up() calls

If the comedi_driver (*auto_attach) fails, the comedi core will call
the (*detach) function to do any cleanup. It's not necessary to do
the cleanup in the (*auto_attach).

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: usbdux: push usb (*probe) into comedi (*auto_attach)

The usb_driver (*probe) calls comedi_usb_auto_config() after finding a
free slot for the static private data and doind some initial allocation
and setup. The comedi_usb_auto_config() will then call the comedi_driver
(*auto_attach).

Move all the probe/auto_attach into the comedi_driver and just have the
usb_driver call comedi_usb_auto_config(). This allows the comedi_driver
to allocate the private data and removes the need for the static array
and the semaphore that protects it.

Since all the probe/auto_attach is now handled by the comedi_driver, we
can also remove the 'attached' and 'probed' information from the private
data. The subdevice functions will only be hooked up if the usb device
has been probed and the comedi device is attached.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: usbdux: push usb (*disconnect) into comedi (*detach)

The usb_driver (*disconnect) calls comedi_usb_auto_unconfig() which will
call the comedi_driver (*detach). Just move all the disconnect/detach
into the comedi_driver and use comedi_usb_auto_unconfig() directly for
the (*disconnect).

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: usbdux: move usb buffer allocation into new function

Move all the usb buffer allocation code in the usb_driver (*probe)
into a new function, usbdux_alloc_usb_buffers(). This allows tidying
up the error path in the (*probe).

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: usbdux: tidy up usbdux_usb_probe()

Use a pointer to the struct usbdux_private data being configured
in the probe. Also use a pointer to the struct urb being setup in
the buffer allocations.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: usbdux: remove the usb_driver (*probe) noise

The dev_dbg() during the usb_driver (*probe) is just added noise.

The dev_err() when a usb_alloc_urb() fails is not necessary. The
allocation failure will have already output a message.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: usbdux: rename struct usbduxsub

This struct is the comedi_device private data. For aesthetic reasons,
rename it to usbdux_private.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: gdm724x: Remove version.h header inclusion in gdm_usb.h

version.h header inclusion is not necessary as detected by
versioncheck.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: gdm724x: Remove version.h header inclusion in gdm_usb.c

version.h header inclusion is not necessary as detected by
versioncheck.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: gdm724x: Remove version.h header inclusion in gdm_tty.h

version.h header inclusion is not necessary as detected by
versioncheck.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: gdm724x: Remove version.h header inclusion in gdm_tty.c

version.h header inclusion is not necessary as detected by
versioncheck.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: gdm724x: Remove version.h header inclusion in gdm_mux.c

version.h header inclusion is not necessary as detected by
versioncheck.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: gdm724x: Remove version.h header inclusion in gdm_lte.h

version.h header inclusion is not necessary as detected by
versioncheck.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: gdm724x: Remove version.h header inclusion in gdm_lte.c

version.h header inclusion is not necessary as detected by
versioncheck.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre: add BLOCK depends in Kconfig

Add BLOCK depends in Kconfig for LUSTRE to fix this:
drivers/staging/lustre/lustre/fid/../include/linux/lustre_compat25.h:117:2:
error: implicit declaration of function ‘unregister_blkdev’

Signed-off-by: Xiong Zhou <jencce.kernel@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: obdclass: Remove duplicate header file inclusion

Removed the header file included twice.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: Remove duplicate header file inclusion in lvfs_linux.c

Removed the header file included twice.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: Remove duplicate header file inclusion in lmv_obd.c

Removed the header file included twice.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: Remove duplicate header file inclusion in lmv_intent.c

Removed the header file included twice.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: Remove duplicate header file inclusion in lmv_fld.c

Removed the header file included twice.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: Remove duplicate header file inclusion in rw26.c

Removed the header files included twice.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: Remove duplicate header file inclusion in rw.c

Removed the header files included twice.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: Remove duplicate header file inclusion in lloop.c

Removed the header files included twice.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: Remove duplicate header file inclusion in llite_mmap.c

Removed the header files included twice.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: Remove duplicate header file inclusion in dir.c

Removed the header files included twice.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: linux-tcpip: Remove duplicate header file inclusion

Removed the header files included twice.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: libcfs: Remove duplicate inclusion of header file

Removed the header files included twice.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: linux-debug: Remove duplicate inclusion of header file

Removed the header files included twice.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: obd: Remove duplicate inclusion of header file

Removed the header file included twice.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: socklnd: Remove duplicate inclusion of header files

Removed the header files included twice.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: o2iblnd: Remove duplicate inclusion of header file

Removed the header files included twice.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: gdm724x: remove ioctl call

This isn't needed, userspace can trigger off of the device id if they
need to do something "special" for different devices in special modes
depending on the device's endian issues.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Won Kang <wonkang@gctsemi.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>