staging/rdma/hfi1: Eliminate WARN_ON when VL is invalid

sdma_select_engine_vl only needs to protect itself from an invalid VL.
Something higher up the stack should be warning the user when they try
to use an SL which maps to an invalid VL.

Reviewed-by: Dean Luick <dean.luick@intel.com>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Ira Weiny <iweiny@gmail.com>
Signed-off-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/rdma/hfi1: Fix error in hfi1 driver build

hfi1 driver build fails with the following error:
In function ‘handle_receive_interrupt’:
error: implicit declaration of function ‘skip_rcv_packet’ [-Werror=implicit-function-declaration]
    last = skip_rcv_packet(&packet, thread);
    ^
This is due to the inclusion of the skip_rcv_packet() in the
CONFIG_PRESCAN_RXQ ifdef block. This function is independent of
CONFIG_PRESCAN_RXQ and should be outside this block.

Fixes: 82c2611daaf0 ("staging/rdma/hfi1: Handle packets with invalid RHF on context 0")
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/rdma/hfi1: Adjust EPROM partitions, add EPROM commands

Add a new EPROM partition, adjusting partition placement.

Add EPROM range commands as a supserset of the partition
commands.  Remove old partition commands.

Enhance EPROM erase, creating a range function and using the
largest erase (sub) commands when possible.

Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Dean Luick <dean.luick@intel.com>
Signed-off-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/rdma/hfi1: Read EFI variable for device description

Read an EFI variable for the device description.  Create the
infrastructure for additional variable reads.

Reviewed-by: Easwar Hariharan <easwar.hariharan@intel.com>
Signed-off-by: Dean Luick <dean.luick@intel.com>
Signed-off-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/rdma/hfi1: rework is_a0() and is_bx()

The current is_bx() will incorrectly match on other steppings.

is_a0() is removed in favor of is_ax().

Reviewed-by: Mark Debbage <mark.debbage@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/rdma/hfi1: Add space between concatenated string elements

Space between concantenated string elements is more human
readable and fixes the checkpatch issue:
CHECK: Concatenated strings should use spaces between elements

Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/rdma/hfi1: Remove rcv bubbles code

Rcv bubbles were improperly calculated for HFIs, fix that here.

Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Arthur Kepner <arthur.kepner@intel.com>
Signed-off-by: Ira Weiny <iweiny@gmail.com>
Signed-off-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/rdma/hfi1: remove RxCtxRHQS from hfi1stats

Removed the RxCtxRHQS counter being dumped into dev_cntrs

Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Vennila Megavannan <vennila.megavannan@intel.com>
Signed-off-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/rdma/hfi1: Fix downgrade race

A link downgrade can race with link up. Avoid the race
in two ways. First, by having the downgrade application logic
take the link state mutex for all of its checking. Second, by
waiting for the link to move out of the going up state.

Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Dean Luick <dean.luick@intel.com>
Signed-off-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

android: unconditionally remove callbacks in sync_fence_free()

Using fence->status to determine whether or not there are callbacks
remaining on the sync_fence is racy since fence->status may have been
decremented to 0 on another CPU before fence_check_cb_func() has
completed.  By unconditionally calling fence_remove_callback() for each
fence in the sync_fence, we guarantee that each callback has either
completed (since fence_remove_callback() grabs the fence lock) or been
removed.

Signed-off-by: Andrew Bresticker <abrestic@chromium.org>
Signed-off-by: Dmitry Torokhov <dtor@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/android/sync: add sync_fence_create_dma

This allows users of dma fences to create a android fence.

v2: Added kerneldoc. (Tvrtko Ursulin).

v4: Updated comments from review feedback my Maarten.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: devel@driverdev.osuosl.org
Cc: Riley Andrews <riandrews@android.com>
Cc: Arve Hjønnevåg <arve@android.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Tested-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/android/sync: Support sync points created from dma-fences

Debug output assumes all sync points are built on top of Android sync points
and when we start creating them from dma-fences will NULL ptr deref unless
taught about this.

v4: Corrected patch ownership.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: devel@driverdev.osuosl.org
Cc: Riley Andrews <riandrews@android.com>
Cc: Arve Hjønnevåg <arve@android.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: android: ashmem.c: destroy slabs when init fails

when ashmem init fails, destroy the slabs, leave
no garbage.

Signed-off-by: Wenwei Tao <ww.tao0320@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: dts: Add dts files to enable ION on Hi6220 SoC.

Add ION node to enable ION on hi6220 SoC platform

Signed-off-by: Chen Feng <puck.chen@hisilicon.com>
Signed-off-by: Yu Dongbin <yudongbin@hisilicon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: android: ion: Add ion driver for Hi6220 SoC platform

Add ion support for hi6220 SoC platform.

Signed-off-by: Chen Feng <puck.chen@hisilicon.com>
Signed-off-by: Yu Dongbin <yudongbin@hisilicon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

docs: dts: Add documentation for hi6220 SoC ION node

Documentation for hi6220 SoC ION node

Signed-off-by: Chen Feng <puck.chen@hisilicon.com>
Signed-off-by: Yu Dongbin <yudongbin@hisilicon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: bug fix on memory free

Set tx_buffer to NULL not to free again the memory that is already freed,
which could cause system crash when device is failed.

Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: set hif_drv before it is used

We are using hif_drv of vif, so it needs to be set before it is used.
Set hif_drv to vif->hifdrv soon after it is allocated.

Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: remove wilc of struct host_if_drv

vif has wilc in it's members so no need to have wilc in host_if_drv.
It is redundant so just remove it and use wilc of vif.

Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: remove drv of struct host_if_msg

This patch remove drv of struct host_if msg and it's related codes.

Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: remove used functions

This patch remove unused functions add_handler_in_list and
remove_handler_in_list, and it's related global variable wfidrv_list and codes.
label fail_timer_2 and it's codes are removed since label is not used anymore.

Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: change join_req_drv type and it's name

To use wilc_get_vif_idx instead of the last get_id_from_handler, join_req_drv
needs to be changed it's type with wilc_vif and name as well.
As a result, get_id_from_handler is not used anymore, so remove it.

Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: wilc_set_wfi_drv_handler: pass vif index

Pass index of vif instead of hif_drv. wilc_get_vif_idx is used to get correct
index of vif.
In the handler function handle_set_wfi_drv_handler, use vif instead of hif_drv,
and use hif_drv_handler->handler instead of hif_drv when deinitialize wilc
device.

Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: use vif index to communicate with wilc device

We now have vif index in all functions related with host interface thread.
wilc_get_vif_idx and wilc_get_vif_from_idx are added to get id and vif
respectively.
Relace get_id_from_handler with wilc_get_vif_idx and get_handler_from_id with
wilc_get_vif_from_idx. Remove unused function get_handler_from_id as well.
We get vif where wilc_get_vif_from_idx is called, so pass vif to msg.vif.

There are two get_id_from_handler left. They will be removed in later patch.

Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: pass struct wilc

Pass struct wilc to the following functions. The functions need wilc to
get proper vif using id from wilc device.

Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: take vif instead of drv in hostIFthread

In the first patch, we sent vif to hostIFthread. we can use vif instead of
drv in the all functions which handle the commands from cfg operations.
Change first argument host_if_drv with wilc_vif and use hif_drv of wilc_vif.
Pass vif to the functions as well.
In case of timer callback functions, set vif to the data and use vif instead
of hif_drv.
Lastly, initialize u32RcvdAssocRespInfoLen since changing hif_drv with vif
causes one uninitialied build warning.
Now we have vif that currently being used so we can use interface index of
wilc_vif to send to wilc device.

Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: remove argument hif_drv

In previous patch we add new argument vif which has hif_drv in it's member.
Therefore, no need to pass hif_drv in those functions. Remove argument
struct host_if_drv and use hif_drv of vif.

Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: pass vif to hostIFthread

We will pass vif, which is currently being used as net_device, instead of
hif_dev. This is the first step to use index of vif to pass to the driver.
Add new argument vif to all the functions that send message to hostIFthread and
set vif to msg.vif. As a result, hostIfthread will get vif.
In later patch, we will remove drv of host_if_msg and use vif instead of it.

Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: remove duplicate netdev

There are two net_device pointer which is the same because two structures
are merged into wilc_vif in previous patch. Remove wilc_netdev and change
with ndev.

Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: change vif to pointer to refence real private data

vif of struct has it's own memory which is not necessary because we have
allocated vif from netdev_priv.
Change vif to pointer type and assign vif which is netdev private data.
Change it's operator on related codes as well.

Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: move perInterface_wlan_t to wilc_vif

perInterface_wlan_t and wilc_vif are all about interface control informations.
We will combine those two structures and maintain as one network interface
control information.
Move all the members of perInterface_wlan_t to wilc_vif and remove the
structure. Rename perInterace_wlan_t to wilc_vif and rename variable name nic
to vif which is proper name for it.

Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: remove unneeded extern variable

This patch removes unnedded extern variable WILC_WFI_devs[] which is not used.

Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: remove unused files

This patch removes linux_wlan_spi.[ch] which are not used anymore.

Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: linux_wlan_spi.c: move all the codes to wilc_spi.c

This patch moves all the codes in linux_wlan_spi.c to wilc_spi.c to make
one spi module. Make wilc_spi_tx, wilc_spi_rx and wilc_spi_tx_rx static
functions. Remove function declaration in linux_wlan_spi.h, which is unnedded
now. No modification has been made inside the codes.
linux_wlan_spi.[ch] will be remove in the next patch.

Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: remove unneeded function

wilc_spi_init in linux_wlan_spi.c is unneeded. It just return true. Rename
_wilc_spi_init in wlan_spi.c to wilc_spi_init.

Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: rename spi function names

There are several similar function names, such as wilc_spi_write and
_wilc_spi_write. It is likely to be confused after merging linux_wlan_spi.c and
wilc_spi.c, so rename following functions properly.
Rename wilc_spi_write to wilc_spi_tx, wilc_spi_read to wilc_spi_rx,
wilc_spi_write_read to wilc_spi_tx_rx, _wilc_spi_write to wilc_spi_write,
_wilc_spi_read to wilc_spi_read.

Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: remove unused files

This patch removes linux_wlan_sdio.[ch] which is not used anymore.

Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: linux_wlan_sdio.c: move all the codes to wilc_sdio.c

To Combine linux_wlan_sdio.c and wilc_sdio.c as one file, move all the codes
in linux_wlan_sdio.c to wilc_sdio.c, and make functions static only.
No Modification has not been made except static, just moved them.
Function declaration in linux_wlan_sdio.h is needless, so just remove them.
linux_wlan_sdio.[ch] will be deleted in the next patch.

Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: linux_sdio_probe: use return value

Return ret from wilc_netdev_init instead of -1 for proper error handling.

Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: linux_wlan_spi.c: return linux error value

return linux error value instead of 0 or 1 and use -EINVAL. Related codes
also changed together.

Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: wilc_deinit(): fixes inconsistent returns

This patch fixes the warning reported by smatch.
 - wilc_deinit() warn: inconsistent returns 'sem:&hif_drv->sem_cfg_values'

This semaphore protect a cfg_values variable but cfg_values variables was not
used here. So, just remove this line.

Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: wilc_init(): fixes inconsistent returns

This patch fixes the warning reported by smatch.
 - wilc_init() warn: inconsistent returns 'sem:&hif_drv->sem_cfg_values'

No need to up the sema here since down was not called before get here.

Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: fixes potential null dereference 'wid.val'

This patch fixes the error reported by smatch.
 - Handle_ListenStateExpired() error: potential null dereference 'wid.val'
If kmalloc failed, referenced to a NULL pointer.

Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: replace explicit NULL comparisons with !

This patch replace explicit NULL comparison with ! operator to simplify code.
Reported by checkpatch.pl for Comparison to NULL could be written !XXX" or "XXX".

Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: linux_wlan_spi.c: fix NULL comparison style

This patch fixes checkpatch CHECK:comparison to NULL could be written "b".

Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: linux_wlan_spi.c: add a blank

This patch fixes checkpatch warning: missing a blank like after declarations.

Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: linux_wlan_spi.c: remove braces for single statement

This patches fixes checkpatch warning: braces {} are not necessary for single
statement blocks. Remove some comments also.

Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: wilc_sdio_cmd52: return linux error value

This patch changes return value with linux error value, not 1 or 0.

Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: wilc_sdio_cmd53: return linux error value

This patch changes return value with linux error value, not 1 or 0.

Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: linux_wlan_sdio.c: remove braces

This patch fixes checkpatch warning braces{} are not necessary for single
statment blocks.

Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: linux_wlan_sdio.c: fix checkpatch warning line over 80

This patch fixes checkpatch warning line over 80 characters.

Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: remove unused functions

This patch removes unused function pointer hif_sync and hif_clear_int, and
removes it's related functions sdio_clear_int, sdio_sync, wilc_spi_clear_int
and wilc_spi_sync.

Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: remove wilc_debug_func of hif_init

This patch removes wilc_debug_func of hif_init and remove it's related
functions as well because it is not used anymore.

Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: sdio/spi: use device print api instead of custom one

This patch use device print api instead of driver defined print. Remove
varialbe dPrint as well. String "[wilc sdio]" and "[wilc spi]" are also removed
from all the print statment if exist because it shows which device the message
is related to.

Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: move all of wilc_wlan_dev_t to struct wilc

linux_wlan.c and wilc_wlan.c was separated into two part at the beginning
to support various platforms. They are in charge of send/receive control and
packet data, so they will be merged into one file wlan.c later.
First of all, wilc_wlan_dev_t which is used as global variable of wilc_wlan.c
will be moved into struct wilc.
This patch moves all members of wilc_wlan_dev_t to struct wilc and use wilc
instead of g_wlan. Finally remove wilc_wlan_dev_t and g_wlan.

Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: remove unused varialbe tx_buffer_offset

This patch removes unused variable tx_buffer_offset of wilc_wlan_dev_t.

Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: remove io_type of wilc_wlan_dev_t

io_type of wilc_wlan_dev_t is unneeded, we can use io_type of struct wilc.
Remove io_type of wilc_wlan_dev_t and use io_type of wilc.

Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: wilc_wlan.c: remove hif_func of wilc_wlan_dev_t

hif_func of wilc_wlan_dev_t is duplicate because we have same struct
wilc_hif_func ops of struct wilc which is available in wilc_wlan.c.
Rename ops of struct wilc with hif_func and remove hif_func of wilc_wlan_dev_t,
and use wilc->hif_func instead of g_wlan.hif_func in all functions.

Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: use kernel define byte order macros

This patch removes define BIG_ENDIAN and use kernel define byte order macros
instead of swap itself. Remove unused BYTE_SWAP macro and __CHECK_ENDIAN__
in Makefile also.

Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: rename index to tcp_pending_ack_idx

This patch renames "index" of struct txq_entry_t to tcp_pending_ack_idx
since this name could be confused index of txq_entry_t. It is index of
tcp pending ack.

It fixes 8e55639d066f ("staging: wilc1000: rename tcp_PendingAck_index
of struct txq_entry_t")

Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: remove wilc memory allocation config

This patch remove memory allocation options in Kconfig. It was used a long time
ago to aquire memory, which we will not use this config anymore.
Remove it's config, related define and codes as well. We will take
PREALLOCATE_AT_LOADING_DRIVER as it is default.

Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: remove define COMPLEMENT_BOOT

This patch removes define COMPLEMENT_BOOT in Makefile. The feature was removed
by commit b46d68825c2d ('staging: wilc1000: remove COMPLEMENT_BOOT') but
the define was not removed. So remove completely.

Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adv_pci1710: rename pci171x_ai_*()

Rename these functions so they have namespace associated with the driver.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adv_pci1710: rename pci171x_ai_{cmd,cmdtest}()

Rename these functions so they have namespace associated with the driver.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adv_pci1710: fix ai (*insn_read)

An (*insn_read) can only happen if the subdevice is in a non-busy state,
i.e. an async command is not running. The board reset and subdevice
(*cancel) will ensure that the control bits (devpriv->ctrl) are already
cleared.

The (*insn_read) only needs to enable the software trigger before reading
samples. It should also disable the software trigger when done. Fix the
(*insn_read) to do this.

For aesthetics, rename the function so it has namespace associated with
the driver.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adv_pci1710: fix counter 0 internal clock source

There are a number of descrepencies in the various manuals for the boards
that this driver supports. Some show a 10 MHz clock for counters 1 and 2
others show a 1 MHz clock. Counter 0 can use either a div 10 of that clock
or an external clock (up to 10 MHz).

Currently this driver initializes counters 1 and 2 with a 10 MHz clock.
For consistency, return 1 MHz (10 MHz/10) for counter 0 when the user
queries the internal clock source with INSN_CONFIG_GET_CLOCK_SRC.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adv_pci1710: tidy up pci1710_reset()

Change the return type to void, this function always succeeds and the
caller does not check the return value anyway.

Fix the initial programming of the control register. The SW bit enables
the software trigger and should not be set here. Setting CNT0 selects the
external clock source for counter 0 (the user counter). It makes more
sense to select the internal 1 MHz clock.

Remove the unnecessary initialization of the private data members. This
function is only called during the (*auto_attach) after the private
data was kzalloc'ed.

Remove the redundant clearing of the A/D FIFO and pending interrupts.
Just do it once.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adv_pci1710: ai (*cancel) should not enable software trigger

The (*cancel) operation should do just that. Remove the setting of the SW bit
which enables the software trigger.

For aesthetics, rename the function so it has namespace associated with the
driver and add a couple comments.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adv_pci1710: post increment 'subdev' in (*auto_attach)

For aesthetics, post-increment the 'subdev' index when used to get a
comedi_subdevice pointer instead of incrementing it after the subdevice
is initialized.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adv_pci1710: tidy up analog input subdev_flags

Remove the SDF_COMMON flag, the analog reference is not programmable and
the default aref (AREF_GROUND -> SDF_GROUND) provides adequate information
about the reference.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adv_pci1710: tidy up analog output subdev_flags

Remove the SDF_COMMON flag, the analog reference is not programmable and
the default aref (AREF_GROUND -> SDF_GROUND) provides adequate information
about the reference.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adv_pci1710: support external analog output reference

The analog outputs can use an external reference to create the D/A output
range. Add an entry to the comedi_lrange table for it and modify the
(*insn_write) to support it.

Note that the D/A output range is 0 to +Vref with a -Vref. The comedi_lrange
does not include the sign of the range. It simmply allows the user to convert
between the 12-bit samples values (0x0000 - 0x0fff) and a physical value (0.0
to 1.0) using the comedilib comedi_to_phys() and comedi_from_phys() functions.
A physical value of 0.0 would actually be 0V with a -Vref and -V with a +Vref
and 1.0 would be +V with a -Vref and 0V with a -Vref. Ths user will need to
work this out but at least they can now use the external reference.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adv_pci1710: rename pci171x_ao_insn_write()

Rename this function so it has namespace associated with the driver.

For aesthetics, move the function so it is located in the middle of
the analog input support functions.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adv_pci1710: rename pci171x_d[io]_insn_bits

Rename these functions so they have namespace associated with the driver.

For aesthetics, move the functions so they are not located in the middle
of the analog input/output support functions.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adv_pci1710: rename pci171x_insn_counter_config()

Rename this function so it has namespace associated with the driver.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adv_pci1710: rename interrupt_service_pci1710()

Rename this function so it has namespace associated with the driver.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adv_pci1710: tidy up boardinfo definition

Remove the unnecessary comments and rename the 'rangelist_ai' member for
aesthetics.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adv_pci1710: remove 'has_large_fifo' and 'has_diff_ai' boardinfo

The pci1711/31 boards are the only ones that have a smaller FIFO (1K vs 4K) and
single-ended analog inputs (no differential).

Replace the 'has_large_fifo' and 'has_diff_ai' members of the boardinfo with
'is_pci1711' and use that to determine how to initialize the analog input
subdev_flags as well as the private data 'max_samples'.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adv_pci1710: remove 'has_di_do' boardinfo

This member of the boardinfo isn't really necessary. All the boards
except the pci1713 have 16 digital inputs and 16 digital outputs.

There is already a 'is_pci1713' member in the boardinfo so that can
be used to determine the subdevices for the digital inputs and outputs
need to be allocated and initialized.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adv_pci1710: remove 'n_aichan' boardinfo

This member of the boardinfo isn't really necessary. All the boards
have analog inputs, the pci1713 has 32 channels the rest have 16
channels.

There is already a 'is_pci1713' member in the boardinfo so that can
be used to determine the number of channels for the analog input
subdevice.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adv_pci1710: define the mux control register bits

For aesthetics, define some macros to set the bits in the mux control
register. Also, rename the 'mux_ext' member of the private data.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adv_pci1710: refactor ai range programming

The gain codes used to program the analog output range are currently
stored in const char arrays. The values look a bit "magic" and it's
not clear how they associate with the comedi_lrange without looking
through user manuals.

Refactor the ai range programming to clarify the driver and remove
the magic numbers. Also, refine the bits in the range register that
set the differential and unipolar modes.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adv_pci1710: don't "reset" board when detaching

Currently this driver calls pci1710_reset() during the (*detach) of
the driver. That function does the following:

  1) program the control register to stop any operations
  2) clears the analog input FIFO
  3) clears any pending interrupts
  4) sets all the analog output channels to unipolar 5V range and 0V output
  5) sets all the digital outputs to 0V

Before detaching the comedi core will (*cancel) any running async commands.
This will handle 1-3 above.

Depending on the application, it might not be safe to reset the analog and
digital outputs when the driver is detached.

Remove the board reset when detaching and just use comedi_pci_detach()
directly for the driver (*detach).

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adv_pci1710: remove 'has_counter' boardinfo

All the boards supported by this driver have a 8254 counter. Channels
1 and 2 are used to create the cascaded 32-bit analog input pacer.
Counter 0 is available for the user on all the boards except the PCI-1713.

Remove the 'has_counter' boardinfo and use the 'is_pci1713' boardinfo to
determine if the user counter subdevice needs to be allocated and
initialized.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adv_pci1710: remove 'has_irq' boardinfo

All the boards supported by this driver can use an interrupt. Remove
the unnecessary boardinfo.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adv_pci_dio: separate out PCI-1760 support

The PCI-1760 is board unique. It uses an outgoing/incoming mailbox
programming sequence to access the hardware. The other boards supported
by this driver use simple register mapping. Including support for the
PCI-1760 in this driver just makes it harder to understand.

Separate out the PCI-1760 support into a new driver, adv_pci1760.

Clean up the new driver. The original code had a bunch of CamelCase and
other checkpatch.pl issues.

The code used to access the outgoing/incoming mailboxes was also a bit
awkward with the passing of the arrays for the outgoing and incoming
mailbox bytes. Replace them with two new functions that send a command
and return the feedback data from the command based on the programming
flow chart in the datasheet for the PCI-1760.

The new adv_pci1760 driver also fixes the incomplete timer subdevice.
This subdevice is actually the 2 PWM outputs so the subdevice type
has been changed to COMEDI_SUBD_PWM.

The counter subdevice support was not complete in the original code.
They are also a bit strange since they are up counters connected to
each of the digital inputs. For now that subdevice has been disabled
(COMEDI_SUBD_UNUSED).

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: replace 'ptr > 0' check by 'ptr' check.

This silences a sparse warning about incompatible comparisons, while making the
intent of the check a bit clearer.

Signed-off-by: Mario J. Rugiero <mrugiero@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: Fix typo in wilc_msgqueue.h

This patch fix some spelling typo in wilc_msgqueue.h

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers:staging:wilc1000 Fix all comparison to NULL could be written ...

This fixes all "comparison to NULL could be written like ..."

Signed-off-by: Bogicevic Sasa <brutallesale@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: Remove 'if' statement, which is always false

- 'if' which is always false is removed
- variable associated with this 'if' is deleted

Signed-off-by: Chandra S Gorentla <csgorentla@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: fix a bug when unload driver

kernel crashes when load and unload driver several times. I used git bisect to
track down and found that removing NULL setting caused the panic.
This reverts only related codes of the patch(a4ab1ade75a3).

Fixes: a4ab1ade75a3 ("staging: wilc1000: replace drvHandler and hWFIDrv with hif_drv")
Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: Handle_SetMulticastFilter(): fixes right shifting more than type allows

This patch fixes the warning reported by smatch.
 - Handle_SetMulticastFilter() warn: right shifting more than type allows

That is unnecessary action of boolean type. just assign 0.

Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: change if with else if

The if statement should be else if since it is part of whole if condition.

Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: Handle_AddBASession: remove unused function

This patch removes unused a function Handle_AddBASession.
And, removes the relation define.

Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: fixes blank lines aren't necessary brace

This patch fixes the checks reported by checkpatch.pl
for Blank lines aren't necessary after an open brace '{' and
Blank lines aren't necessary before a close brace '}'.

Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: wilc_wfi_cfgoperations.c: remove over-commenting

There are over-commenting in the wilc_wfi_cfgoperations.c file and most of them
are not helpful to explain what the code does and generate 80 ending
line over warnings. So, all of comments are removed in this patch and the
comments will later be added if necessary with the preferred Linux style.

Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: fix rmmod failure

This patch fixes rmmod failure. wilc->firmware needs to be set to NULL because
it is used again to check firmware is released when module exit.

Fixes: 8b8ad7bc90bc ("staging: wilc1000: rename wilc_firmware in the struct wilc")
Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: return linux error value

Return proper linux error value -ETIMEDOUT instead of -1.

Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: remove unused variable

wilc_sdio_func is not used anymore so just delete it.

Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: rename pstrNetworkInfo in get_rssi_avg function

This patch renames pstrNetworkInfo to network_info that is
first argument of get_rssi_avg function to avoid camelcase.

Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>