[media] dvb_net: Convert local hex dump to print_hex_dump_debug

Use the generic facility instead of a home-grown one.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] dvb_net: Use standard debugging facilities

Convert dprintk to netdev_dbg where appropriate.
Remove dvb_net_debug module_param.
Remove __func__ from output as that can be added by dynamic_debug.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] dvb_net: Use vsprintf %pM extension to print Ethernet addresses

No need for more macros, so remove them and use the kernel extension.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] staging: lirc_serial: adjust boolean assignments

Adjusts boolean assignments from 0/1 to false/true.

And accordingly, it also adjusts the if conditions.

Signed-off-by: Heba Aamer <heba93aamer@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] stb0899: use sign_extend32() for sign extension

Instead of implement its own logic, use the already-defined one.

Signed-off-by: Martin Kepplinger <martink@posteo.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] si2168: add support for 1.7MHz bandwidth

This patch is based on Antti's silabs branch.

Add support for 1.7 MHz bandwidth. Supported in all versions of Si2168 according to short data sheets.

[mchehab@osg.samsung.com: Fix CodingStyle]
Signed-off-by: Olli Salonen <olli.salonen@iki.fi>
Reviewed-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] si2168: return error if set_frontend is called with invalid parameters

This patch should is based on Antti's silabs branch.

According to dvb-frontend.h set_frontend may be called with bandwidth_hz set to 0 if automatic bandwidth is required. Si2168 does not support automatic bandwidth and does not declare FE_CAN_BANDWIDTH_AUTO in caps.

This patch will change the behaviour in a way that EINVAL is returned if bandwidth_hz is 0.

Signed-off-by: Olli Salonen <olli.salonen@iki.fi>
Reviewed-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] lirc_dev: avoid potential null-dereference

We have to check pointer for NULL and then dereference it.

Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] mn88472: simplify bandwidth registers setting code

Signed-off-by: Benjamin Larsson <benjamin@southpole.se>
Reviewed-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] dvb: tc90522: re-add symbol-rate report

symbol-rate report was wrongly removed off by the commit:906aaf5a .

Signed-off-by: Akihiro Tsukada <tskd08@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] lmedm04: add read snr, signal strength and ber call backs

This allows calling the original functions providing the streaming is off.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] lmedm04: Create frontend call back for read status

Create dm04_read_status to check lock through either interrupt values
or directly by the call back.

When the device is not streaming the frontends original call back is
used. When streaming has started it turns off I2C messaging by
setting st->i2c_talk_onoff to zero. I2C can only be turn on again
by one of the other allowed frontend calls.

All old code is removed from lme2510_msg and this function only needs
to set st->i2c_talk_onoff to 1.

The lock status is saved and when the frondend is locked is maintained
by lme2510_int_response who will now just kill the lock.

The call back for rs2000 tuner is nologer required.

All frontend types have been tested.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] lmedm04: create frontend callbacks for signal/snr/ber/ucblocks

Create call backs dm04_read_signal_strength, dm04_read_snr and
move dm04_read_ber and dm04_read_ucblocks for all frontends

Removing the I2C filtering from lme2510_msg and the old rs2000 callbacks.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] lmedm04: Fix usb_submit_urb BOGUS urb xfer, pipe 1 != type 3 in interrupt urb

A quirk of some older firmwares that report endpoint pipe type as PIPE_BULK
but the endpoint otheriwse functions as interrupt.

Check if usb_endpoint_type is USB_ENDPOINT_XFER_BULK and set as usb_rcvbulkpipe.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] lmedm04: Increase Interupt due time to 200 msec

Ocassionally the device fails to report back an interrupt urb status which
results in false no lock trigger on the RS2000 demodulator.

Increase time from 60 msecs to 200 msecs.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Cc: <stable@vger.kernel.org> # v3.17+
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] cx88-dvb: whitespace cleanup

X-Patchwork-Delegate: m.chehab@samsung.com
Fix the following smatch warning:
drivers/media/pci/cx88//cx88-dvb.c:1508 dvb_register() warn: if statement not indented

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] rtl28xxu: properly initialize pdata

As complained by smatch:
drivers/media/usb/dvb-usb-v2/rtl28xxu.c:1159 rtl2832u_tuner_attach() info: 'pdata' is not actually initialized (unreached code).

Cc: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] rtl2832: declare functions as static

drivers/media/dvb-frontends/rtl2832.c:157:5: warning: no previous prototype for ‘rtl2832_bulk_write’ [-Wmissing-prototypes]
 int rtl2832_bulk_write(struct i2c_client *client, unsigned int reg,
     ^
drivers/media/dvb-frontends/rtl2832.c:169:5: warning: no previous prototype for ‘rtl2832_update_bits’ [-Wmissing-prototypes]
 int rtl2832_update_bits(struct i2c_client *client, unsigned int reg,
     ^
drivers/media/dvb-frontends/rtl2832.c:181:5: warning: no previous prototype for ‘rtl2832_bulk_read’ [-Wmissing-prototypes]
 int rtl2832_bulk_read(struct i2c_client *client, unsigned int reg, void *val,

Cc: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] rtl2830: declare functions as static

drivers/media/dvb-frontends/rtl2830.c:21:5: warning: no previous prototype for ‘rtl2830_bulk_write’ [-Wmissing-prototypes]
 int rtl2830_bulk_write(struct i2c_client *client, unsigned int reg,
     ^
drivers/media/dvb-frontends/rtl2830.c:33:5: warning: no previous prototype for ‘rtl2830_update_bits’ [-Wmissing-prototypes]
 int rtl2830_update_bits(struct i2c_client *client, unsigned int reg,
     ^
drivers/media/dvb-frontends/rtl2830.c:45:5: warning: no previous prototype for ‘rtl2830_bulk_read’ [-Wmissing-prototypes]
 int rtl2830_bulk_read(struct i2c_client *client, unsigned int reg, void *val,
     ^

Cc: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] rtl2832_sdr: add kernel-doc comments for platform_data

Add kernel-doc comments for platform_data configuration structure.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] rtl2832: add kernel-doc comments for platform_data

Add kernel-doc comments for platform_data configuration structure.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] rtl2830: add kernel-doc comments for platform_data

Add kernel-doc comments for platform_data configuration structure.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] rtl2832: implement own lock for regmap

Introduce own lock to silence lockdep warning. lockdep validator
makes wrong decision when two similar (&map->mutex) locks were taken
recursively, even those are different mutexes in a two different
drivers. After that patch, functionality remains same, but mutex names
are different. That is a temporary hack, proper solution is make
regmap aware of locked nested locking rules.

=============================================
[ INFO: possible recursive locking detected ]
3.18.0-rc4+ #4 Tainted: G           O
---------------------------------------------
kdvb-ad-0-fe-0/2814 is trying to acquire lock:
 (&map->mutex){+.+.+.}, at: [<ffffffff814ec90f>] regmap_lock_mutex+0x2f/0x40

but task is already holding lock:
 (&map->mutex){+.+.+.}, at: [<ffffffff814ec90f>] regmap_lock_mutex+0x2f/0x40

other info that might help us debug this:
 Possible unsafe locking scenario:
       CPU0
       ----
  lock(&map->mutex);
  lock(&map->mutex);

 *** DEADLOCK ***
 May be due to missing lock nesting notation
1 lock held by kdvb-ad-0-fe-0/2814:
 #0:  (&map->mutex){+.+.+.}, at: [<ffffffff814ec90f>] regmap_lock_mutex+0x2f/0x40

stack backtrace:
CPU: 3 PID: 2814 Comm: kdvb-ad-0-fe-0 Tainted: G           O 3.18.0-rc4+ #4
Hardware name: System manufacturer System Product Name/M5A78L-M/USB3, BIOS 2001    09/11/2014
 0000000000000000 00000000410c8772 ffff880293af3868 ffffffff817a6f82
 0000000000000000 ffff8800b3462be0 ffff880293af3968 ffffffff810e7f94
 ffff880293af3888 00000000410c8772 ffffffff82dfee60 ffffffff81ab8f89
Call Trace:
 [<ffffffff817a6f82>] dump_stack+0x4e/0x68
 [<ffffffff810e7f94>] __lock_acquire+0x1ea4/0x1f50
 [<ffffffff810e2a7d>] ? trace_hardirqs_off+0xd/0x10
 [<ffffffff817b01f3>] ? _raw_spin_lock_irqsave+0x83/0xa0
 [<ffffffff810e13e6>] ? up+0x16/0x50
 [<ffffffff810e2a7d>] ? trace_hardirqs_off+0xd/0x10
 [<ffffffff817af8bf>] ? _raw_spin_unlock_irqrestore+0x5f/0x70
 [<ffffffff810e9069>] lock_acquire+0xc9/0x170
 [<ffffffff814ec90f>] ? regmap_lock_mutex+0x2f/0x40
 [<ffffffff817ab50e>] mutex_lock_nested+0x7e/0x430
 [<ffffffff814ec90f>] ? regmap_lock_mutex+0x2f/0x40
 [<ffffffff814ec90f>] ? regmap_lock_mutex+0x2f/0x40
 [<ffffffff817a530b>] ? printk+0x70/0x86
 [<ffffffff8110d9e8>] ? mod_timer+0x168/0x240
 [<ffffffff814ec90f>] regmap_lock_mutex+0x2f/0x40
 [<ffffffff814f08d9>] regmap_update_bits+0x29/0x60
 [<ffffffffa03e9778>] rtl2832_select+0x38/0x70 [rtl2832]
 [<ffffffffa039b03d>] i2c_mux_master_xfer+0x3d/0x90 [i2c_mux]
 [<ffffffff815da493>] __i2c_transfer+0x73/0x2e0
 [<ffffffff815dbaba>] i2c_transfer+0x5a/0xc0
 [<ffffffff815dbb6e>] i2c_master_send+0x4e/0x70
 [<ffffffffa03ff25a>] regmap_i2c_write+0x1a/0x50 [regmap_i2c]
 [<ffffffff817ab713>] ? mutex_lock_nested+0x283/0x430
 [<ffffffff814f06b2>] _regmap_raw_write+0x862/0x880
 [<ffffffff814ec90f>] ? regmap_lock_mutex+0x2f/0x40
 [<ffffffff814f0744>] _regmap_bus_raw_write+0x74/0xa0
 [<ffffffff814ef3d2>] _regmap_write+0x92/0x140
 [<ffffffff814f0b7b>] regmap_write+0x4b/0x70
 [<ffffffffa032b090>] ? dvb_frontend_release+0x110/0x110 [dvb_core]
 [<ffffffffa05141d4>] e4000_init+0x34/0x210 [e4000]
 [<ffffffffa032a029>] dvb_frontend_init+0x59/0xc0 [dvb_core]
 [<ffffffff810bde30>] ? finish_task_switch+0x80/0x180
 [<ffffffff810bddf2>] ? finish_task_switch+0x42/0x180
 [<ffffffffa032b116>] dvb_frontend_thread+0x86/0x7b0 [dvb_core]
 [<ffffffff817a9203>] ? __schedule+0x343/0x930
 [<ffffffffa032b090>] ? dvb_frontend_release+0x110/0x110 [dvb_core]
 [<ffffffff810b826b>] kthread+0x10b/0x130
 [<ffffffff81020099>] ? sched_clock+0x9/0x10
 [<ffffffff810b8160>] ? kthread_create_on_node+0x250/0x250
 [<ffffffff817b063c>] ret_from_fork+0x7c/0xb0
 [<ffffffff810b8160>] ? kthread_create_on_node+0x250/0x250

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] rtl28xxu: correct reg access routine name prefixes

Use rtl28xxu_ prefix for all register access routine names.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] rtl28xxu: merge rtl2831u and rtl2832u properties

As all the callbacks are already same we could merge device
properties struct too and save space.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] rtl28xxu: merge chip type specific all callbacks

Merge all chip type specific prefixed (rtl2831u_ and rtl2832u_)
callback to top level callback prefixed as rtl28xxu_.

rtl2831u_foo() => rtl28xxu_foo()
rtl2832u_foo() => rtl28xxu_foo()

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] rtl28xxu: add heuristic to detect chip type

Detect automatically whether chip is old RTL2831U or newer
RTL2832U/RTL2832P. Detection is based I2C command that is found only
from newer RTL2832U models.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] rtl28xxu: move usb buffers to state

Buffer needed for USB control message is small so move it to state
and get rid of alloc/free used for each control message.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] rtl28xxu: fix logging

Pass correct device pointer to dev_* logging in order to print
module name and bus id correctly.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] rtl28xxu: rename state variable 'priv' to 'dev'

I prefer dev over priv and I want keep all my drivers in line with
that.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] rtl2832: remove internal mux I2C adapter

There was 2 muxed I2C adapters, one for demod tuner bus and one for
internal use. Idea of internal I2C adapter was to force I2C repeater
close when demod access its registers. Driver has also delayed work
queue based method to close I2C repeater.

After regmap conversion internal I2C adapter based repeater close
left unused - only work queue method was in use. We could not use
internal mux adapter method with regmap as it makes recursive regmap
call, which causes deadlock as regmap has own locking. Due to that
remove whole method totally.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] rtl2832_sdr: refcount to rtl28xxu

We are consumer of DVB frontend provided by rtl28xxu module. Due to
that we must use refcount to ensure none could remove rtl28xxu when
we are alive (or when we are streaming, if more fine-grained
refcounting is wanted).

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] rtl28xxu: do not refcount rtl2832_sdr module

This driver, rtl28xxu, offers frontend service for rtl2832_sdr
module, thus we are producer and rtl2832_sdr module is consumer.
Due to that, reference counting should be done in way rtl2832_sdr
takes refrence to rtl28xxu. Remove wrong refcount.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] rtl28xxu: simplify FE callback handling

Logic is so simple that there is no idea to separate tuner selection to
own function, instead do it in a callback and get rid of one function.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] rtl28xxu: fix DVB FE callback

DVB FE callback functionality went broken after I moved tuners to
demod muxed I2C adapter. That happens because driver state was
carried by I2C adapter and when mux is used there is one adapter
more in a chain.
USB adapter <-> I2C adapter <-> muxed I2C adapter

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] rtl2832: implement sleep

Put demod to soft reset in order to save power when sleep. That drops
power usage ~30mA @5V on USB dongle I tested. In real life it does
not matter much as USB IF powers off demod too, but now it is done
twice - demod and USB IF.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] rtl2832: claim copyright and module author

I have implemented tons of things for that driver, more than anyone
else, so lets claim copyright and module authorship.

Cc: Thomas Mair <thomas.mair86@gmail.com>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] rtl2832: cleanups and minor changes

Remove all the stuff that is not needed anymore. Rename variable.
Remove extra new lines.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] rtl2832_sdr: cleanups

Small cleanups. Remove unneeded variables. Some checkpatch issues.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] rtl2832_sdr: fix logging

Pass correct device, platform device, for logging system in order
to format printouts correctly.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] rtl28xxu: use master I2C adapter for slave demods

Both mn88472 and mn88473 slave demods are connected to master I2C
bus, not the bus behind master demod I2C gate like tuners. Use
correct bus.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] rtl28xxu: switch SDR module to platform driver

RTL2832 SDR module implements kernel platform driver. Change old
binding to that one.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] rtl2832_sdr: convert to platform driver

That SDR driver module was abusing DVB frontend SEC (satellite
equipment controller) device and due to that it was also using
legacy DVB binding. Platform bus is pseudo-bus provided by kernel
driver model and it fits cases like that, where any other busses
are not suitable.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] rtl2832_sdr: rename state variable from 's' to 'dev'

'dev' sounds better than 's' for such variable.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] rtl2832: provide register IO callbacks

Provide register read and write callbacks for SDR module.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] rtl2832: merge reg page as a part of reg address

Chips uses 8-bit register addresses with 5 pages. Extend register
address by using register page as a first byte of address, defining
virtual register addresses. That is common method of handling
register pages and regmap also uses it. Remove page + address
conversion glue which was there for regmap.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] rtl2832: remove unneeded software reset from init()

There is no need to do software reset on init() as it is done a bit
later on end of set_frontend(). Software reset usually means
restarting (resetting to starting point) chip internal state machine
(FSM). Naturally it is done after all parameters are programmed.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] rtl2832: use regmap reg cache

Enable regmap register cache in order to reduce IO.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] rtl28xxu: add support for RTL2832U/RTL2832 PID filter

RTL2832 demod integrated into RTL2832U has PID filter. PID filtering
is provided by rtl2832 demod driver. Add support for it.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] rtl2832: implement PID filter

Implement PID filter. This demod has PID filter size of 32 PIDs.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] rtl2832: define more demod lock statuses

Demod lock flags are derived from demod state machine states. States
are running from 1 to 11, where highest state 11 means demod is
fully locked and streaming. Naturally smaller state numbers means
there is some partial locks.

Define now state 10 as missing synch and lock.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] rtl2832: drop FE i2c gate control support

We don't need it anymore as all users are using muxed I2C adapter.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] rtl28xxu: use demod mux I2C adapter for every tuner

Tuners are connected to demod I2C adapter. Use that muxed adapter
for each tuner. That allows us to get rid of hackish FE gate control
solution.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] rtl2832: implement DVBv5 signal strength statistics

Estimate signal strength from IF digital AGC.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] rtl2832: wrap DVBv5 BER to DVBv3

Change legacy DVBv3 read BER to return values calculated by DVBv5
statistics.

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] rtl2832: wrap DVBv5 CNR to DVBv3 SNR

Change legacy DVBv3 read SNR to return values calculated by DVBv5
statistics.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] rtl2832: implement DVBv5 BER statistic

DVBv5 BER.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] rtl2832: implement DVBv5 CNR statistic

DVBv5 CNR.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] rtl2832: convert to regmap API

Use regmap to cover register access routines.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] rtl28xxu: use platform data config for rtl2832 demod

Use platform data configuration for rtl2832 demod driver. Old
configuration are still left as it is used for rtl2832_sdr driver.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] rtl2832: move all configuration to platform data struct

Move all needed configuration values to platform data structure
and remove old configuration code where possible.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] rtl2832: enhance / fix logging

Pass correct device pointer to dev_* logging functions in order
print logs correctly.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] rtl2832: rename driver state variable from 'priv' to 'dev'

Rename it device state variable to dev. Both priv and dev are very
common terms for such variable in kernel, but I like use dev in
order to keep drivers consistent.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] rtl2832: remove exported resources

Exported resources are not needed anymore as all users are using
callbacks carried via platform data. Due to that we will remove
those.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] rtl28xxu: use rtl2832 demod callbacks accessing its resources

Switch demod resource use from exported symbols to callbacks its
provides.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] rtl2832: add platform data callbacks for exported resources

Add callback for all of those functions which are currently
exported using EXPORT_SYMBOL. That allows us convert every user to
callbacks and eventually all exported symbols could be removed.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] rtl2830: convert to regmap API

Use regmap to cover register access routines.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] rtl2830: implement own I2C locking

Own I2C locking is needed due to two special reasons:
1) Chips uses multiple register pages/banks on single I2C slave.
Page is changed via I2C register access.
2) Chip offers muxed/gated I2C adapter for tuner. Gate/mux is
controlled by I2C register access.

Due to these reasons, I2C locking did not fit very well.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] rtl28xxu: add support for RTL2831U/RTL2830 PID filter

RTL2830 demod integrated to RTL2831U has PID filter. PID filtering
is provided by rtl2830 demod driver. Add support for it.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] rtl2830: implement PID filter

Implement PID filter.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] rtl2830: wrap DVBv5 CNR to DVBv3 SNR

Change legacy DVBv3 read SNR to return values calculated by DVBv5
statistics.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] rtl2830: wrap DVBv5 BER to DVBv3

Change legacy DVBv3 read BER to return values calculated by DVBv5
statistics.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] rtl2830: wrap DVBv5 signal strength to DVBv3

Change legacy DVBv3 signal strength to return values calculated by
DVBv5 statistics.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] rtl2830: implement DVBv5 BER statistic

DVBv5 BER.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] rtl2830: implement DVBv5 signal strength statistics

Estimate signal strength from IF AGC.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] rtl2830: implement DVBv5 CNR statistic

DVBv5 CNR.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] rtl2830: style related changes

Trivial changes proposed by checkpatch.pl and some more.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] rtl2830: get rid of internal config data

Remove internal config and use configuration values directly from
the platform data.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] rtl2830: fix logging

Pass correct device for dev_foo() logging in order to print logs
correctly.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] rtl2830: carry pointer to I2C client for every function

As a I2C driver struct i2c_client is top level structure representing
the driver. Use it as parameter to carry all needed information for
each function in order to simplify things.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] rtl2830: rename 'priv' to 'dev'

Use name 'dev' for device state instance as it is more common and
also one letter shorter.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] rtl2830: get rid of legacy DVB driver binding

Remove legacy DVB binding as all users are using I2C binding.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] rtl28xxu: use I2C binding for RTL2830 demod driver

rtl2830 driver supports now I2C model too. Start using it.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] rtl2830: convert driver to kernel I2C model

Convert driver to kernel I2C model. Old DVB proprietary model is
still left there also.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] dvb-usb-v2: add pointer to 'struct usb_interface' for driver usage

Top level pointer on USB probe is struct usb_interface *. Add that
pointer to struct dvb_usb_device that drivers could use it, for
dev_* logging and more.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] smipcie: return more proper value in interrupt handler

Although IRQ_HANDLED is "safe" value to return,
it is better to let the kernel know whether the driver handle the interrupt or not.

Signed-off-by: Nibble Max <nibble.max@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] media: platform: fix platform_no_drv_owner.cocci warnings

drivers/media/platform/am437x/am437x-vpfe.c:2767:3-8: No need to set .owner here. The core will do it.

 Remove .owner field if calls are used which set it automatically

Generated by: scripts/coccinelle/api/platform_no_drv_owner.cocci

CC: Benoit Parrot <bparrot@ti.com>
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] marvell-ccic: MMP_CAMERA no longer builds

The mmp ccic driver expects a platform_data structure that does not exist
in the mainline kernel and presumably was changed in a kernel fork, which
leads to build errors now:

media/platform/marvell-ccic/mmp-driver.c: In function 'mmpcam_calc_dphy':
media/platform/marvell-ccic/mmp-driver.c:252:15: error: 'struct mmp_camera_platform_data' has no member named 'dphy3_algo'
  switch (pdata->dphy3_algo) {
               ^
media/platform/marvell-ccic/mmp-driver.c:253:7: error: 'DPHY3_ALGO_PXA910' undeclared (first use in this function)
  case DPHY3_ALGO_PXA910:
       ^
media/platform/marvell-ccic/mmp-driver.c:253:7: note: each undeclared identifier is reported only once for each function it appears in
media/platform/marvell-ccic/mmp-driver.c:257:8: error: 'struct mmp_camera_platform_data' has no member named 'dphy'

This marks the driver as 'BROKEN' but keeps the code around.
Alternatively it could be removed entirely.

Fixes: 05fed81625bf75 ("[media] marvell-ccic: add MIPI support for marvell-ccic driver")

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Jonathan Corbet <corbet@lwn.net>
Cc: Libin Yang <lbyang@marvell.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] staging: bcm2048: Delete an unnecessary check before the function call "video_unregister_device"

The video_unregister_device() function tests whether its argument is NULL
and then returns immediately. Thus the test around the call is not needed.

This issue was detected by using the Coccinelle software.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] media: ti-vpe: Use mem-to-mem ioctl helpers

1: Simplify the vpe mem-to-mem driver by using the m2m ioctl
   and vb2 helpers.
2: Align and arranged the v4l2_ioctl_ops.
3: Fixes a typo.
4: Use of_match_ptr() instead of explicitly defining the macro
   to NULL in case CONFIG_OF is not defined.

Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] dib8000: upd_demod_gain_period should be u32

X-Patchwork-Delegate: m.chehab@samsung.com
As shown at the code, upd_demod_gain_period is used to write
to two 16-bit registers:
    dib8000_write_word(state, 1946, upd_demod_gain_period & 0xFFFF);
    dib8000_write_word(state, 1947, reg | (1<<14) | ((upd_demod_gain_period >> 16) & 0xFF));

So, it should be declared as u32.

This fixes the following smatch warning:
drivers/media/dvb-frontends/dib8000.c:1282 dib8000_agc_startup() warn: right shifting more than type allows

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] cx23885: move CI/MAC registration to a separate function

As reported by smatch:
drivers/media/pci/cx23885/cx23885-dvb.c:2080 dvb_register() Function too hairy.  Giving up.

This is indeed a too complex function, with lots of stuff inside.
Breaking this into two functions makes it a little bit less hairy.

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] media: au0828 - convert to use videobuf2

Convert au0828 to use videobuf2. Tested with NTSC.
Tested video and vbi devices with xawtv, tvtime,
and vlc. Ran v4l2-compliance to ensure there are
no failures.

Video compliance test results summary:
Total: 75, Succeeded: 75, Failed: 0, Warnings: 18

Vbi compliance test results summary:
Total: 75, Succeeded: 75, Failed: 0, Warnings: 0

Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Reviewed-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] media: fix au0828 compile error from au0828_boards initialization

au0828 picked up UNSET from videobuf-core.h and fails to compile
if videobuf-core.h isn't included. Change it to use -1U instead
to fix the problem.

    drivers/media/usb/au0828/au0828-cards.c:47:17: error: ‘UNSET’ undeclared here (not in a function)
       .tuner_type = UNSET,

Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] media: fix au0828_analog_register() to not free au0828_dev

au0828_analog_register() frees au0828_dev when it fails to
locate isoc endpoint. au0828_usb_probe() continues with dvb
and rc probe and registration assuming dev is still valid.
When au0828_analog_register() fails to locate isoc endpoint,
it should return without free'ing au0828_dev. Otherwise, the
probe will fail as dev is null when au0828_dvb_register() is
called.

Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] Add MAINTAINERS entry for the adv7180

Add myself as the maintainer for the adv7180 video subdev driver.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Federico Vaga <federico.vaga@gmail.com>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] adv7180: Add fast switch support

In fast switch mode the adv7180 (and similar) can lock onto a new signal
faster when switching between different inputs. As a downside though it is
no longer able to auto-detect the incoming format.

The fast switch mode is exposed as a boolean v4l control that allows
userspace applications to either enable or disable fast switch mode.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Federico Vaga <federico.vaga@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] adv7180: Add I2P support

Some of the devices supported by this driver have a interlaced-to-
progressive converter which can optionally be enabled. This patch adds
support for enabling and disabling the I2P converter on such devices.

I2P mode can be enabled by selecting V4L2_FIELD_NONE instead of
V4L2_FIELD_INTERLACED for the format.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Federico Vaga <federico.vaga@gmail.com>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] adv7180: Add support for the adv7280-m/adv7281-m/adv7281-ma/adv7282-m

This patch adds support for the adv7280-m/adv2781-m/adv7281-ma/adv7282-m
devices to the adv7180 driver. They are very similar to the
adv7280/adv7281/adv7282 but instead of parallel video out they feature a
MIPI CSI2 transmitter.

The CSI2 transmitter is configured via a separate I2C address, so we need to
register a dummy device for it.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Federico Vaga <federico.vaga@gmail.com>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] adv7180: Add support for the adv7280/adv7281/adv7282

This patch adds support for the adv7280/adv7281/adv7282 devices to the
adv7180 driver. They are very similar to the adv7182, the main difference
from the drivers point of view are some different tuning constants for
improved video performance.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Federico Vaga <federico.vaga@gmail.com>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>