GitHub/LineageOS/G12/android_kernel_amlogic_linux-4.9.git
12 years agogma500: unload fixes
Alan Cox [Mon, 14 May 2012 11:04:00 +0000 (12:04 +0100)]
gma500: unload fixes

Debugging the lid problem tested various error paths which were found
wanting so start fixing them up.

There is a ton of improvement work could be done here so that every bit
of functionality agrees if its _fini, _uninit, etc, and they agree who
is responsible for deciding if the clean up is needed.

That can come later.

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
12 years agogma500: Fix crash on D2700MUD and various other boards
Alan Cox [Mon, 14 May 2012 11:03:34 +0000 (12:03 +0100)]
gma500: Fix crash on D2700MUD and various other boards

The recent changes led to the lid timer code being run on various devices.
It does no harm on most but isn't needed. It also calls unconditionally
into the Poulsbo backlight code which goes bang on Cedartrail.

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
12 years agodrm/kms: driver for virtual cirrus under qemu
Dave Airlie [Tue, 17 Apr 2012 13:12:29 +0000 (14:12 +0100)]
drm/kms: driver for virtual cirrus under qemu

This is the initial driver for emulated cirrus GPU found in qemu.
This driver only supports the emulated GPU and doesn't attempt
to bind to any real cirrus GPUs.

This driver is intended to be used with xf86-video-modesetting in userspace.
It requires at least version 0.3.0

This follow the same design as ast and mgag200, and is based on work
done by Matthew Garrett previously.

This GPU has no hw cursor, and it can't scanout 32-bpp, only packed 24-bpp.
i.e. it sucks.

Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
12 years agomgag200: initial g200se driver (v2)
Dave Airlie [Tue, 17 Apr 2012 14:01:25 +0000 (15:01 +0100)]
mgag200: initial g200se driver (v2)

This is a driver for the G200 server engines chips,
it doesn't driver any of the Matrix G series desktop cards.

It will bind to G200 SE A,B, G200EV, G200WB, G200EH and G200ER cards.

Its based on previous work done my Matthew Garrett but remodelled
to follow the same style and flow as the AST server driver. It also
works along the same lines as the AST server driver wrt memory management.

There is no userspace driver planned, xf86-video-modesetting should be used.
It also appears these GPUs have no ARGB hw cursors.

v2: add missing tagfifo reset + G200 SE memory bw setup pieces.

Signed-off-by: Dave Airlie <airlied@redhat.com>
12 years agodrm: Initial KMS driver for AST (ASpeed Technologies) 2000 series (v2)
Dave Airlie [Wed, 29 Feb 2012 13:40:04 +0000 (13:40 +0000)]
drm: Initial KMS driver for AST (ASpeed Technologies) 2000 series (v2)

This is the initial driver for the Aspeed Technologies chips found in
servers. This driver supports the AST 2000, 2100, 2200, 2150 and 2300. It
doesn't support the AST11xx due to lack of hw to test it on, and them requiring
different codepaths.

This driver is intended to be used with xf86-video-modesetting in userspace.

This driver has a slightly different design than other KMS drivers, but
future server chips will probably share similiar setup. As these GPUs commonly
have low video RAM, it doesn't make sense to put the kms console in VRAM
always. This driver places the kms console into system RAM, and does dirty
updates to a copy in video RAM. When userspace sets a new scanout buffer,
it forcefully evicts the video RAM console, and X can create a framebuffer
that can use all of of video RAM.

This driver uses TTM but in a very simple fashion to control the eviction
to system RAM of the console, and multiple servers.

v2: add s/r support, fix Kconfig.

Signed-off-by: Dave Airlie <airlied@redhat.com>
12 years agox86/vga: fix build with efi disabled.
Dave Airlie [Thu, 17 May 2012 07:31:29 +0000 (08:31 +0100)]
x86/vga: fix build with efi disabled.

Reported by sfr on -next merge.

Signed-off-by: Dave Airlie <airlied@redhat.com>
12 years agox86/vga: set the default device from the fixup.
Dave Airlie [Mon, 14 May 2012 16:00:40 +0000 (17:00 +0100)]
x86/vga: set the default device from the fixup.

Since Matthew's efi/vga changes on non-EFI machines we were failing
to tell the vgaarb/switcheroo what the default device was, this
sets the default device in the quirk if none has been set before.

This fixes the switcheroo on my T410s.

Cc: Matthew Garrett <mjg@redhat.com>
Acked-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
12 years agoMerge branch 'topic/vga-switcheroo' of git://git.kernel.org/pub/scm/linux/kernel...
Dave Airlie [Sun, 13 May 2012 15:58:08 +0000 (16:58 +0100)]
Merge branch 'topic/vga-switcheroo' of git://git./linux/kernel/git/tiwai/sound into drm-core-next

* 'topic/vga-switcheroo' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  vga_switcheroo: Add the support for audio clients
  vga_switcheroo: Introduce struct vga_switcheroo_client_ops
  vga_switcheroo: Refactor using linked list

12 years agodrm/radeon/hdmi: fix some coding style
Rafał Miłecki [Sun, 6 May 2012 15:29:46 +0000 (17:29 +0200)]
drm/radeon/hdmi: fix some coding style

Use defined macros by the way.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
12 years agodrm/radeon/hdmi: update modesetting
Rafał Miłecki [Sun, 6 May 2012 15:29:45 +0000 (17:29 +0200)]
drm/radeon/hdmi: update modesetting

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
12 years agodrm/radeon/hdmi: separate evergreen code
Rafał Miłecki [Sun, 6 May 2012 15:29:44 +0000 (17:29 +0200)]
drm/radeon/hdmi: separate evergreen code

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
12 years agodrm/radeon/kms/hdmi: helper getting ready ACR entry
Rafał Miłecki [Mon, 30 Apr 2012 13:44:54 +0000 (15:44 +0200)]
drm/radeon/kms/hdmi: helper getting ready ACR entry

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Reviewed-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
12 years agodrm/radeon/kms/hdmi: clean&improve handling HDMI mode
Rafał Miłecki [Mon, 30 Apr 2012 13:44:53 +0000 (15:44 +0200)]
drm/radeon/kms/hdmi: clean&improve handling HDMI mode

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Reviewed-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
12 years agodrm/radeon/kms/hdmi: enable audio packets at one place
Rafał Miłecki [Mon, 30 Apr 2012 13:44:52 +0000 (15:44 +0200)]
drm/radeon/kms/hdmi: enable audio packets at one place

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Reviewed-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
12 years agovga_switcheroo: Add the support for audio clients
Takashi Iwai [Thu, 26 Apr 2012 12:29:48 +0000 (14:29 +0200)]
vga_switcheroo: Add the support for audio clients

Add the support for audio clients to VGA-switcheroo for handling the
HDMI audio controller together with VGA switching.  The id of the
audio controller should be given explicitly at registration time
unlike the video controller.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=43155

Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agovga_switcheroo: Introduce struct vga_switcheroo_client_ops
Takashi Iwai [Fri, 11 May 2012 05:51:17 +0000 (07:51 +0200)]
vga_switcheroo: Introduce struct vga_switcheroo_client_ops

This changes the API as a clean-up.  Instead of passing multiple
function pointers at each time, introduce a new struct holding the
whole callback functions and pass it to the registration.

The same struct will be used for the upcoming audio client
registration, too.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agovga_switcheroo: Refactor using linked list
Takashi Iwai [Thu, 26 Apr 2012 10:55:59 +0000 (12:55 +0200)]
vga_switcheroo: Refactor using linked list

Refactor the code base a bit for the further work to adapt more clients.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoMerge tag 'drm-intel-next-2012-05-06-merged' of git://people.freedesktop.org/~danvet...
Dave Airlie [Fri, 11 May 2012 16:41:58 +0000 (17:41 +0100)]
Merge tag 'drm-intel-next-2012-05-06-merged' of git://people.freedesktop.org/~danvet/drm-intel into drm-core-next

Daniel says

Highlights:
- sparse fixes from Ben.
- tons of little cleanups from Chris all over: tiling_changed
 clarification, deferred_free list removal, ...
- fix up irq handler on gen2 & gen3 + related cleanups from Chris
- prep work for wait_rendering_timeout from Ben with some nice
 refactorings
- first set of infoframe fixes from Paulo for doubleclocked CEA modes
- improve pch pll handling from Jesse and Chris
- gpu hangman, this also contains the reset fix for gen4
- rps sanity check from Chris - this papers over issues when the gpu fails
 to clock up on snb/ivb, and it is shockingly easy to hit. The code
 prints a big WARN backtrace and restores the hw to a sane state. The
 real fix is still in the works.

Atm I'm aware of 2 regressions in -next:
- One of the gmbus patches (not gmbus itself) regressed lvds detection on
 a MacbookPro. I've analyzed the bug already and I think I know what's
 going on, patch is awaiting test feedback.
- Just today QA reported that DP on ilk regressed. That bug is fresh of
 the press and still awaiting detailed logfiles and the bisect result.
 The only thing that's clear atm is that -fixes works and -next doesn't.

12 years agodrm: pass dev to drm_vm_{open,close}_locked()
Rob Clark [Tue, 1 May 2012 16:04:51 +0000 (11:04 -0500)]
drm: pass dev to drm_vm_{open,close}_locked()

Previously these functions would assume that vma->vm_file was the
drm_file.  Although if in some cases if the drm driver needs to use
something else for the backing file (such as the tmpfs filp) then this
assumption is no longer true.  But vma->vm_private_data is still the
GEM object.

With this change, now the drm_device comes from the GEM object rather
than the drm_file so the driver is more free to play with vma->vm_file.

The scenario where this comes up is for mmap'ing of cached dmabuf's
for non-coherent systems, where the driver needs to use fault handling
and PTE shootdown to simulate coherency.  We can't use the vma->vm_file
of the dmabuf, which is using anon_inode's address_space.  The most
straightforward thing to do is to use the GEM object's obj->filp for
vma->vm_file in all cases, for which we need this patch.

Signed-off-by: Rob Clark <rob@ti.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
12 years agogma500: Turn on the IRQ for everything
Alan Cox [Fri, 11 May 2012 10:33:17 +0000 (11:33 +0100)]
gma500: Turn on the IRQ for everything

Keep this as a patch of its own in case of bug reports.

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
12 years agogma500: clean up some more checks
Alan Cox [Fri, 11 May 2012 10:33:03 +0000 (11:33 +0100)]
gma500: clean up some more checks

We don't need to check these - they are always going to be the
same for any PVR based device.

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
12 years agocdv: Add all cedarview pci ids
Alan Cox [Fri, 11 May 2012 10:32:46 +0000 (11:32 +0100)]
cdv: Add all cedarview pci ids

Cover all D2xxx/N2xxx chips.

Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
[Hand applied to upstream driver]
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
12 years agogma500: Clean up some of the noise
Alan Cox [Fri, 11 May 2012 10:32:31 +0000 (11:32 +0100)]
gma500: Clean up some of the noise

We have a lot of debug type stuff we don't actually need any more.

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
12 years agogma500: use the register map to clean up
Alan Cox [Fri, 11 May 2012 10:31:22 +0000 (11:31 +0100)]
gma500: use the register map to clean up

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
12 years agogma500: introduce some register maps
Alan Cox [Fri, 11 May 2012 10:30:53 +0000 (11:30 +0100)]
gma500: introduce some register maps

All the conditional ugly register selection really wants to be
cleaned up. Use a struct describing each pipe and its registers.

This will also let us hide some of the oddments between platforms
for any future merging of bits together. In particular the way the
DPLL and FP registers randomly wander around.

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
12 years agogma500: Clean up from the psb_pipe structure
Alan Cox [Fri, 11 May 2012 10:30:33 +0000 (11:30 +0100)]
gma500: Clean up from the psb_pipe structure

We have lots of local assignments that can now be eliminated

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
12 years agogma500: introduce a structure describing each pipe
Alan Cox [Fri, 11 May 2012 10:30:16 +0000 (11:30 +0100)]
gma500: introduce a structure describing each pipe

This starts the move away from lots of confused unions of per driver stuff
inherited when we merged the drivers together.

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
12 years agogma500: Fix build without ACPI
Alan Cox [Fri, 11 May 2012 10:29:41 +0000 (11:29 +0100)]
gma500: Fix build without ACPI

Reported-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
12 years agodrm/radeon/kms: fix warning on 32-bit in atomic fence printing
Dave Airlie [Wed, 9 May 2012 16:27:29 +0000 (17:27 +0100)]
drm/radeon/kms: fix warning on 32-bit in atomic fence printing

/ssd/git/drm-core-next/drivers/gpu/drm/radeon/radeon_fence.c: In function ‘radeon_debugfs_fence_info’:
/ssd/git/drm-core-next/drivers/gpu/drm/radeon/radeon_fence.c:606:7: warning: format ‘%lx’ expects argument of type ‘long unsigned int’, but argument 3 has type ‘long long int’ [-Wformat]

Signed-off-by: Dave Airlie <airlied@redhat.com>
12 years agodrm/radeon: make the ib an inline object
Jerome Glisse [Wed, 9 May 2012 13:35:02 +0000 (15:35 +0200)]
drm/radeon: make the ib an inline object

No need to malloc it any more.

Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Christian König <deathsimple@vodafone.de>
Signed-off-by: Dave Airlie <airlied@redhat.com>
12 years agodrm/radeon: remove r600 blit mutex v2
Christian König [Wed, 9 May 2012 13:35:01 +0000 (15:35 +0200)]
drm/radeon: remove r600 blit mutex v2

If we don't store local data into global variables
it isn't necessary to lock anything.

v2: rebased on new SA interface

Signed-off-by: Christian König <deathsimple@vodafone.de>
Signed-off-by: Dave Airlie <airlied@redhat.com>
12 years agodrm/radeon: move the semaphore from the fence into the ib
Jerome Glisse [Wed, 9 May 2012 13:35:00 +0000 (15:35 +0200)]
drm/radeon: move the semaphore from the fence into the ib

It never really belonged there in the first place.

Signed-off-by: Christian König <deathsimple@vodafone.de>
Signed-off-by: Dave Airlie <airlied@redhat.com>
12 years agodrm/radeon: immediately free ttm-move semaphore
Christian König [Wed, 9 May 2012 13:34:59 +0000 (15:34 +0200)]
drm/radeon: immediately free ttm-move semaphore

We can now protected the semaphore ram by a
fence, so free it immediately.

Signed-off-by: Christian König <deathsimple@vodafone.de>
Signed-off-by: Dave Airlie <airlied@redhat.com>
12 years agodrm/radeon: rip out the ib pool
Jerome Glisse [Wed, 9 May 2012 13:34:58 +0000 (15:34 +0200)]
drm/radeon: rip out the ib pool

It isn't necessary any more and the suballocator seems to perform
even better.

Signed-off-by: Christian König <deathsimple@vodafone.de>
Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
12 years agodrm/radeon: simplify semaphore handling v2
Jerome Glisse [Wed, 9 May 2012 13:34:57 +0000 (15:34 +0200)]
drm/radeon: simplify semaphore handling v2

Directly use the suballocator to get small chunks of memory.
It's equally fast and doesn't crash when we encounter a GPU reset.

v2: rebased on new SA interface.

Signed-off-by: Christian König <deathsimple@vodafone.de>
Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
12 years agodrm/radeon: multiple ring allocator v3
Christian König [Wed, 9 May 2012 13:34:56 +0000 (15:34 +0200)]
drm/radeon: multiple ring allocator v3

A startover with a new idea for a multiple ring allocator.
Should perform as well as a normal ring allocator as long
as only one ring does somthing, but falls back to a more
complex algorithm if more complex things start to happen.

We store the last allocated bo in last, we always try to allocate
after the last allocated bo. Principle is that in a linear GPU ring
progression was is after last is the oldest bo we allocated and thus
the first one that should no longer be in use by the GPU.

If it's not the case we skip over the bo after last to the closest
done bo if such one exist. If none exist and we are not asked to
block we report failure to allocate.

If we are asked to block we wait on all the oldest fence of all
rings. We just wait for any of those fence to complete.

v2: We need to be able to let hole point to the list_head, otherwise
    try free will never free the first allocation of the list. Also
    stop calling radeon_fence_signalled more than necessary.

v3: Don't free allocations without considering them as a hole,
    otherwise we might lose holes. Also return ENOMEM instead of ENOENT
    when running out of fences to wait for. Limit the number of holes
    we try for each ring to 3.

Signed-off-by: Christian König <deathsimple@vodafone.de>
Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
12 years agodrm/radeon: use one wait queue for all rings add fence_wait_any v2
Jerome Glisse [Wed, 9 May 2012 13:34:55 +0000 (15:34 +0200)]
drm/radeon: use one wait queue for all rings add fence_wait_any v2

Use one wait queue for all rings. When one ring progress, other
likely does to and we are not expecting to have a lot of waiter
anyway.

Also add a fence_wait_any that will wait until the first fence
in the fence array (one fence per ring) is signaled. This allow
to wait on all rings.

v2: some minor cleanups and improvements.

Signed-off-by: Christian König <deathsimple@vodafone.de>
Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
12 years agodrm/radeon: define new SA interface v3
Christian König [Wed, 9 May 2012 13:34:54 +0000 (15:34 +0200)]
drm/radeon: define new SA interface v3

Define the interface without modifying the allocation
algorithm in any way.

v2: rebase on top of fence new uint64 patch
v3: add ring to debugfs output

Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Christian König <deathsimple@vodafone.de>
Signed-off-by: Dave Airlie <airlied@redhat.com>
12 years agodrm/radeon: make sa bo a stand alone object
Christian König [Wed, 9 May 2012 13:34:53 +0000 (15:34 +0200)]
drm/radeon: make sa bo a stand alone object

Allocating and freeing it seperately.

Signed-off-by: Christian König <deathsimple@vodafone.de>
Signed-off-by: Dave Airlie <airlied@redhat.com>
12 years agodrm/radeon: keep start and end offset in the SA
Christian König [Wed, 9 May 2012 13:34:52 +0000 (15:34 +0200)]
drm/radeon: keep start and end offset in the SA

Instead of offset + size keep start and end offset directly.

Signed-off-by: Christian König <deathsimple@vodafone.de>
Signed-off-by: Dave Airlie <airlied@redhat.com>
12 years agodrm/radeon: add sub allocator debugfs file
Christian König [Wed, 9 May 2012 13:34:51 +0000 (15:34 +0200)]
drm/radeon: add sub allocator debugfs file

Dumping the current allocations.

Signed-off-by: Christian König <deathsimple@vodafone.de>
Signed-off-by: Dave Airlie <airlied@redhat.com>
12 years agodrm/radeon: add proper locking to the SA v3
Christian König [Wed, 9 May 2012 13:34:50 +0000 (15:34 +0200)]
drm/radeon: add proper locking to the SA v3

Make the suballocator self containing to locking.

v2: split the bugfix into a seperate patch.
v3: remove some unreleated changes.

Sig-off-by: Christian König <deathsimple@vodafone.de>
Signed-off-by: Dave Airlie <airlied@redhat.com>
12 years agodrm/radeon: use inline functions to calc sa_bo addr
Christian König [Wed, 9 May 2012 13:34:49 +0000 (15:34 +0200)]
drm/radeon: use inline functions to calc sa_bo addr

Instead of hacking the calculation multiple times.

Signed-off-by: Christian König <deathsimple@vodafone.de>
Signed-off-by: Dave Airlie <airlied@redhat.com>
12 years agodrm/radeon: rework locking ring emission mutex in fence deadlock detection v2
Christian König [Wed, 9 May 2012 13:34:48 +0000 (15:34 +0200)]
drm/radeon: rework locking ring emission mutex in fence deadlock detection v2

Some callers illegal called fence_wait_next/empty
while holding the ring emission mutex. So don't
relock the mutex in that cases, and move the actual
locking into the fence code.

v2: Don't try to unlock the mutex if it isn't locked.

Signed-off-by: Christian König <deathsimple@vodafone.de>
Signed-off-by: Dave Airlie <airlied@redhat.com>
12 years agodrm/radeon: rework fence handling, drop fence list v7
Jerome Glisse [Wed, 9 May 2012 13:34:47 +0000 (15:34 +0200)]
drm/radeon: rework fence handling, drop fence list v7

Using 64bits fence sequence we can directly compare sequence
number to know if a fence is signaled or not. Thus the fence
list became useless, so does the fence lock that mainly
protected the fence list.

Things like ring.ready are no longer behind a lock, this should
be ok as ring.ready is initialized once and will only change
when facing lockup. Worst case is that we return an -EBUSY just
after a successfull GPU reset, or we go into wait state instead
of returning -EBUSY (thus delaying reporting -EBUSY to fence
wait caller).

v2: Remove left over comment, force using writeback on cayman and
    newer, thus not having to suffer from possibly scratch reg
    exhaustion
v3: Rebase on top of change to uint64 fence patch
v4: Change DCE5 test to force write back on cayman and newer but
    also any APU such as PALM or SUMO family
v5: Rebase on top of new uint64 fence patch
v6: Just break if seq doesn't change any more. Use radeon_fence
    prefix for all function names. Even if it's now highly optimized,
    try avoiding polling to often.
v7: We should never poll the last_seq from the hardware without
    waking the sleeping threads, otherwise we might lose events.

Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Christian König <deathsimple@vodafone.de>
Signed-off-by: Dave Airlie <airlied@redhat.com>
12 years agodrm/radeon: convert fence to uint64_t v4
Jerome Glisse [Wed, 9 May 2012 13:34:46 +0000 (15:34 +0200)]
drm/radeon: convert fence to uint64_t v4

This convert fence to use uint64_t sequence number intention is
to use the fact that uin64_t is big enough that we don't need to
care about wrap around.

Tested with and without writeback using 0xFFFFF000 as initial
fence sequence and thus allowing to test the wrap around from
32bits to 64bits.

v2: Add comment about possible race btw CPU & GPU, add comment
    stressing that we need 2 dword aligned for R600_WB_EVENT_OFFSET
    Read fence sequenc in reverse order of GPU write them so we
    mitigate the race btw CPU and GPU.

v3: Drop the need for ring to emit the 64bits fence, and just have
    each ring emit the lower 32bits of the fence sequence. We
    handle the wrap over 32bits in fence_process.

v4: Just a small optimization: Don't reread the last_seq value
    if loop restarts, since we already know its value anyway.
    Also start at zero not one for seq value and use pre instead
    of post increment in emmit, otherwise wait_empty will deadlock.

Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Christian König <deathsimple@vodafone.de>
Signed-off-by: Dave Airlie <airlied@redhat.com>
12 years agodrm/radeon: replace the per ring mutex with a global one
Christian König [Wed, 9 May 2012 13:34:45 +0000 (15:34 +0200)]
drm/radeon: replace the per ring mutex with a global one

A single global mutex for ring submissions seems sufficient.

Signed-off-by: Christian König <deathsimple@vodafone.de>
Signed-off-by: Dave Airlie <airlied@redhat.com>
12 years agodrm/radeon: fix possible lack of synchronization btw ttm and other ring
Jerome Glisse [Wed, 9 May 2012 13:34:44 +0000 (15:34 +0200)]
drm/radeon: fix possible lack of synchronization btw ttm and other ring

We need to sync with the GFX ring as ttm might have schedule bo move
on it and new command scheduled for other ring need to wait for bo
data to be in place.

Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Reviewed by: Christian König <christian.koenig@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
12 years agoMerge remote-tracking branch 'airlied/drm-core-next' into drm-intel-next-queued
Daniel Vetter [Tue, 8 May 2012 11:39:59 +0000 (13:39 +0200)]
Merge remote-tracking branch 'airlied/drm-core-next' into drm-intel-next-queued

Backmerge of drm-next to resolve a few ugly conflicts and to get a few
fixes from 3.4-rc6 (which drm-next has already merged). Note that this
merge also restricts the stencil cache lra evict policy workaround to
snb (as it should) - I had to frob the code anyway because the
CM0_MASK_SHIFT define died in the masked bit cleanups.

We need the backmerge to get Paulo Zanoni's infoframe regression fix
for gm45 - further bugfixes from him touch the same area and would
needlessly conflict.

Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
12 years agoMerge branch 'for-airlied' of git://people.freedesktop.org/~danvet/drm-intel into...
Dave Airlie [Mon, 7 May 2012 15:09:09 +0000 (16:09 +0100)]
Merge branch 'for-airlied' of git://people.freedesktop.org/~danvet/drm-intel into drm-core-next

Daniel prepared this branch with a back-merge as git was getting
very confused about changes in intel_display.c

12 years agoMerge tag 'v3.4-rc6' into drm-intel-next
Daniel Vetter [Mon, 7 May 2012 09:30:46 +0000 (11:30 +0200)]
Merge tag 'v3.4-rc6' into drm-intel-next

Conflicts:
drivers/gpu/drm/i915/intel_display.c

Ok, this is a fun story of git totally messing things up. There
/shouldn't/ be any conflict in here, because the fixes in -rc6 do only
touch functions that have not been changed in -next.

The offending commits in drm-next are 14415745b2..1fa611065 which
simply move a few functions from intel_display.c to intel_pm.c. The
problem seems to be that git diff gets completely confused:

$ git diff 14415745b2..1fa611065

is a nice mess in intel_display.c, and the diff leaks into totally
unrelated functions, whereas

$git diff --minimal  14415745b2..1fa611065

is exactly what we want.

Unfortunately there seems to be no way to teach similar smarts to the
merge diff and conflict generation code, because with the minimal diff
there really shouldn't be any conflicts. For added hilarity, every
time something in that area changes the + and - lines in the diff move
around like crazy, again resulting in new conflicts. So I fear this
mess will stay with us for a little longer (and might result in
another backmerge down the road).

Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
12 years agogma500: mid-bios: rewrite VBT/GCT handling in a cleaner way
Kirill A. Shutemov [Thu, 3 May 2012 15:27:21 +0000 (16:27 +0100)]
gma500: mid-bios: rewrite VBT/GCT handling in a cleaner way

Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
12 years agogma500: fix -Wmissing-include-dirs warnings
Kirill A. Shutemov [Thu, 3 May 2012 14:16:14 +0000 (15:16 +0100)]
gma500: fix -Wmissing-include-dirs warnings

cc1: warning: include/drm: No such file or directory [enabled by default]

It's reproducible if you build with O=/some/obj/dir and W=1.

Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
12 years agogma500: cdv_intel_lvds: mark cdv_intel_lvds_enc_funcs as static
Kirill A. Shutemov [Thu, 3 May 2012 14:12:43 +0000 (15:12 +0100)]
gma500: cdv_intel_lvds: mark cdv_intel_lvds_enc_funcs as static

Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
12 years agogma500: oaktrail_hdmi_i2c_handler(): base should be __iomem
Kirill A. Shutemov [Thu, 3 May 2012 14:09:22 +0000 (15:09 +0100)]
gma500: oaktrail_hdmi_i2c_handler(): base should be __iomem

Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
12 years agogma500: lid_state should be __iomem
Kirill A. Shutemov [Thu, 3 May 2012 14:09:03 +0000 (15:09 +0100)]
gma500: lid_state should be __iomem

This was mostly already fixed but this one change is needed to match Kirill's
original submission

Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
12 years agogma500: psb_irq_turn_off_dpst() fix bit operation
Kirill A. Shutemov [Thu, 3 May 2012 14:08:50 +0000 (15:08 +0100)]
gma500: psb_irq_turn_off_dpst() fix bit operation

Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
12 years agogma500: framebuffer: mark psb_fb_helper_funcs as static
Kirill A. Shutemov [Thu, 3 May 2012 14:08:38 +0000 (15:08 +0100)]
gma500: framebuffer: mark psb_fb_helper_funcs as static

Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
12 years agogma500: vram_addr should be __iomem
Kirill A. Shutemov [Thu, 3 May 2012 14:08:26 +0000 (15:08 +0100)]
gma500: vram_addr should be __iomem

Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
12 years agogma500: sgx_reg and vdc_reg should be __iomem
Kirill A. Shutemov [Thu, 3 May 2012 14:08:08 +0000 (15:08 +0100)]
gma500: sgx_reg and vdc_reg should be __iomem

Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
12 years agogma500: gtt: fix __iomem sparse warnings
Kirill A. Shutemov [Thu, 3 May 2012 14:07:46 +0000 (15:07 +0100)]
gma500: gtt: fix __iomem sparse warnings

Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
12 years agogma500: psb_gtt_init(): drop unused variable
Kirill A. Shutemov [Thu, 3 May 2012 14:07:27 +0000 (15:07 +0100)]
gma500: psb_gtt_init(): drop unused variable

Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
12 years agogma500: address the lid code
Alan Cox [Thu, 3 May 2012 14:07:13 +0000 (15:07 +0100)]
gma500: address the lid code

We need this for Poulsbo

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
12 years agogma500: opregion and ACPI
Alan Cox [Thu, 3 May 2012 14:06:18 +0000 (15:06 +0100)]
gma500: opregion and ACPI

Add the opregion support and bring us in line with the opregion functionality in the
reference driver code. We can't share this with i915 currently because there are
hardcoded assumptions about dev_priv etc in both versions.

[airlied: include opregion.h fix]

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
12 years agoLinux 3.4-rc6
Linus Torvalds [Sun, 6 May 2012 22:07:32 +0000 (15:07 -0700)]
Linux 3.4-rc6

12 years agoMerge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Sun, 6 May 2012 19:19:38 +0000 (12:19 -0700)]
Merge branch 'x86-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull x86 fixes form Peter Anvin

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  intel_mid_powerbtn: mark irq as IRQF_NO_SUSPEND
  arch/x86/platform/geode/net5501.c: change active_low to 0 for LED driver
  x86, relocs: Remove an unused variable
  asm-generic: Use __BITS_PER_LONG in statfs.h
  x86/amd: Re-enable CPU topology extensions in case BIOS has disabled it

12 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux...
Linus Torvalds [Sun, 6 May 2012 17:20:07 +0000 (10:20 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/mason/linux-btrfs

Pull btrfs fixes from Chris Mason:
 "The big ones here are a memory leak we introduced in rc1, and a
  scheduling while atomic if the transid on disk doesn't match the
  transid we expected.  This happens for corrupt blocks, or out of date
  disks.

  It also fixes up the ioctl definition for our ioctl to resolve logical
  inode numbers.  The __u32 was a merging error and doesn't match what
  we ship in the progs."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
  Btrfs: avoid sleeping in verify_parent_transid while atomic
  Btrfs: fix crash in scrub repair code when device is missing
  btrfs: Fix mismatching struct members in ioctl.h
  Btrfs: fix page leak when allocing extent buffers
  Btrfs: Add properly locking around add_root_to_dirty_list

12 years agox86: fix broken TASK_SIZE for ia32_aout
Al Viro [Sun, 6 May 2012 16:20:00 +0000 (17:20 +0100)]
x86: fix broken TASK_SIZE for ia32_aout

Setting TIF_IA32 in load_aout_binary() used to be enough; these days
TASK_SIZE is controlled by TIF_ADDR32 and that one doesn't get set
there.  Switch to use of set_personality_ia32()...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
12 years agodrm/i915: Support pageflipping interrupts for all 3-pipes on IVB
Chris Wilson [Wed, 2 May 2012 08:52:12 +0000 (09:52 +0100)]
drm/i915: Support pageflipping interrupts for all 3-pipes on IVB

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
12 years agoBtrfs: avoid sleeping in verify_parent_transid while atomic
Chris Mason [Sun, 6 May 2012 11:23:47 +0000 (07:23 -0400)]
Btrfs: avoid sleeping in verify_parent_transid while atomic

verify_parent_transid needs to lock the extent range to make
sure no IO is underway, and so it can safely clear the
uptodate bits if our checks fail.

But, a few callers are using it with spinlocks held.  Most
of the time, the generation numbers are going to match, and
we don't want to switch to a blocking lock just for the error
case.  This adds an atomic flag to verify_parent_transid,
and changes it to return EAGAIN if it needs to block to
properly verifiy things.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
12 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mattst88...
Linus Torvalds [Sat, 5 May 2012 23:34:38 +0000 (16:34 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/mattst88/alpha

Pull alpha fixes from Matt Turner:
 "My alpha tree is back up (after taking quite some time to get my GPG
  key signed).  It contains just some simple fixes."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mattst88/alpha:
  alpha: silence 'const' warning in sys_marvel.c
  alpha: include module.h to fix modpost on Tsunami
  alpha: properly define get/set_rtc_time on Marvel/SMP
  alpha: VGA_HOSE depends on VGA_CONSOLE

12 years agoTTY: pdc_cons, fix regression in close
Jiri Slaby [Sat, 5 May 2012 20:49:10 +0000 (22:49 +0200)]
TTY: pdc_cons, fix regression in close

The test in pdc_console_tty_close '!tty->count' was always wrong
because tty->count is decremented after tty->ops->close is called and
thus can never be zero. Hence the 'then' branch was never executed and
the timer never deleted.

This did not matter until commit 5dd5bc40f3b6 ("TTY: pdc_cons, use
tty_port").  There we needed to set TTY in tty_port to NULL, but this
never happened due to the bug above.

So change the test to really trigger at the last close by changing the
condition to 'tty->count == 1'.

Well, the driver should not touch tty->count at all.  It should use
tty_port->count and count open count there itself.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Reported-and-tested-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Cc: Helge Deller <deller@gmx.de>
Cc: "James E.J. Bottomley" <jejb@parisc-linux.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
12 years agodrm/i915: fix gen4 gpu reset
Daniel Vetter [Wed, 2 May 2012 19:33:52 +0000 (21:33 +0200)]
drm/i915: fix gen4 gpu reset

While trying to fix up gen4 gpu reset in

commit f49f0586191fe16140410db0a46d43bdc690d6af
Author: Kenneth Graunke <kenneth@whitecape.org>
Date:   Sat Sep 11 01:19:14 2010 -0700

    drm/i915: Actually set the reset bit in i965_reset

a little confusion about when wait_for times out has been introduced -
wait for loops _until_ the condition is true.

This fixes gpu reset on my gm45, testing with my hangman code shows
that it's now fairly reliable - it only died after well over 100 reset
cycles.

Cc: Eric Anholt <eric@anholt.net>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eugeni Dodonov <eugeni.dodonov@intel.com>
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
12 years agodrm/i915: remove modeset reset from i915_reset
Daniel Vetter [Fri, 27 Apr 2012 13:17:46 +0000 (15:17 +0200)]
drm/i915: remove modeset reset from i915_reset

On gen4+ we don't reset the display unit, so resetting the complete
modeset state should not be necessary.

We can't do reset on gen3 anyway, which leaves us with gen2 reset:
According to Chris Wilson, that doesn't work so great, so he suggested
we just ignore that. If the need ever arrises, we can re-add it later
on.

Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
12 years agodrm/i915: also reset the media engine on gen4/5
Daniel Vetter [Fri, 27 Apr 2012 13:17:45 +0000 (15:17 +0200)]
drm/i915: also reset the media engine on gen4/5

... we actually use it.

Unfortunately we can't reset both at the same time without also
resetting the display unit, so do render and media separately.

Also replace magic constants with proper #defines.

Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
12 years agodrm/i915: kill flags parameter for reset functions
Daniel Vetter [Fri, 27 Apr 2012 13:17:44 +0000 (15:17 +0200)]
drm/i915: kill flags parameter for reset functions

Only half of them even cared, and it's always the same one.

Reviewed-by: Eugeni Dodonov <eugeni.dodonov@intel.com>
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
12 years agodrm/i915: make gpu hangman more resilient
Daniel Vetter [Fri, 27 Apr 2012 13:17:43 +0000 (15:17 +0200)]
drm/i915: make gpu hangman more resilient

- reset the stop_rings infrastructure while resetting the hw to
  avoid angering the hangcheck right away (and potentially declaring
  the gpu permanently wedged).

- ignore reset failures when hanging due to the hangman - we don't
  have reset code for all generations.

v2: Ensure that we only ignore reset failures when the hw reset is not
implemented and not when it failed.

Reviewed-by: Eugeni Dodonov <eugeni.dodonov@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
12 years agodrm/i915: extract intel_gpu_reset
Daniel Vetter [Fri, 27 Apr 2012 13:17:42 +0000 (15:17 +0200)]
drm/i915: extract intel_gpu_reset

Slightly cleans up the code and could be useful for e.g. Ben
Widawsky's hw context patches.

v2: New colours!

Cc: Ben Widawsky <ben@bwidawsk.net>
Reviewed-by: Eugeni Dodonov <eugeni.dodonov@intel.com>
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
12 years agodrm/i915: simplify i915_reset a bit
Daniel Vetter [Fri, 27 Apr 2012 13:17:41 +0000 (15:17 +0200)]
drm/i915: simplify i915_reset a bit

- need_display is always true, scrap it.
- don't reacquire the mutex to do nothing after having restored the
  gem state.

Reviewed-by: Eugeni Dodonov <eugeni.dodonov@intel.com>
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
12 years agodrm/i915: allow the existing error_state to be destroyed
Daniel Vetter [Fri, 27 Apr 2012 13:17:40 +0000 (15:17 +0200)]
drm/i915: allow the existing error_state to be destroyed

... by writing (anything) to i915_error_state.

This way we can simulate a bunch of gpu hangs and run the error_state
capture code every time (without the need to reload the module).

To make that happen we need to abandon the simple seq_file wrappers
provided by the drm core. While at it put the new error_state
refcounting to some good use and associated the error_state to the
debugfs when opening the file. Otherwise the error_state could change
while someone is reading it. This should help greatly when we finally
get around to split up the giant single seq_file block that the
error_state file currently is into smaller parts.

v2: Actually squash all the fixes into the patch ...

Reviewed-by: Eugeni Dodonov <eugeni.dodonov@intel.com>
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
12 years agodrm/i915: rework dev->first_error locking
Daniel Vetter [Fri, 27 Apr 2012 13:17:39 +0000 (15:17 +0200)]
drm/i915: rework dev->first_error locking

- reduce the irq disabled section, even for a debugfs file this was
  way too long.
- always disable irqs when taking the lock.

v2: Thou shalt not mistake locking for reference counting, so:
- reference count the error_state to protect from concurent freeeing.
  This will be only really used in the next patch.

Reviewed-by: Eugeni Dodonov <eugeni.dodonov@intel.com>
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
12 years agodrm/i915: add interface to simulate gpu hangs
Daniel Vetter [Thu, 3 May 2012 12:48:16 +0000 (14:48 +0200)]
drm/i915: add interface to simulate gpu hangs

gpu reset is a very important piece of our infrastructure.
Unfortunately we only really it test by actually hanging the gpu,
which often has bad side-effects for the entire system. And the gpu
hang handling code is one of the rather complicated pieces of code we
have, consisting of
- hang detection
- error capture
- actual gpu reset
- reset of all the gem bookkeeping
- reinitialition of the entire gpu

This patch adds a debugfs to selectively stopping rings by ceasing to
update the hw tail pointer, which will result in the gpu no longer
updating it's head pointer and eventually to the hangcheck firing.
This way we can exercise the gpu hang code under controlled conditions
without a dying gpu taking down the entire systems.

Patch motivated by me forgetting to properly reinitialize ppgtt after
a gpu reset.

Usage:

echo $((1 << $ringnum)) > i915_ring_stop # stops one ring

echo 0xffffffff > i915_ring_stop # stops all, future-proof version

then run whatever testload is desired. i915_ring_stop automatically
resets after a gpu hang is detected to avoid hanging the gpu to fast
and declaring it wedged.

v2: Incorporate feedback from Chris Wilson.

v3: Add the missing cleanup.

v4: Fix up inconsistent size of ring_stop_read vs _write, noticed by
Eugeni Dodonov.

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Eugeni Dodonov <eugeni.dodonov@intel.com>
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
12 years agoMerge tag 'sound-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Linus Torvalds [Sat, 5 May 2012 17:07:06 +0000 (10:07 -0700)]
Merge tag 'sound-3.4' of git://git./linux/kernel/git/tiwai/sound

Pull sound sound fixes from Takashi Iwai:
 "As good as nothing exciting here; just a few trivial fixes for various
  ASoC stuff."

* tag 'sound-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ASoC: omap-pcm: Free dma buffers in case of error.
  ASoC: s3c2412-i2s: Fix dai registration
  ASoC: wm8350: Don't use locally allocated codec struct
  ASoC: tlv312aic23: unbreak resume
  ASoC: bf5xx-ssm2602: Set DAI format
  ASoC: core: check of_property_count_strings failure
  ASoC: dt: sgtl5000.txt: Add description for 'reg' field
  ASoC: wm_hubs: Make sure we don't disable differential line outputs

12 years agoMerge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux
Linus Torvalds [Sat, 5 May 2012 17:06:06 +0000 (10:06 -0700)]
Merge branch 'release' of git://git./linux/kernel/git/lenb/linux

Pull an ACPI patch from Len Brown:
 "It fixes a D3 issue new in 3.4-rc1."

By Lin Ming via Len Brown:
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux:
  ACPI: Fix D3hot v D3cold confusion

12 years agoinit: don't try mounting device as nfs root unless type fully matches
Sasha Levin [Sat, 5 May 2012 15:06:35 +0000 (17:06 +0200)]
init: don't try mounting device as nfs root unless type fully matches

Currently, we'll try mounting any device who's major device number is
UNNAMED_MAJOR as NFS root.  This would happen for non-NFS devices as
well (such as 9p devices) but it wouldn't cause any issues since
mounting the device as NFS would fail quickly and the code proceeded to
doing the proper mount:

       [  101.522716] VFS: Unable to mount root fs via NFS, trying floppy.
       [  101.534499] VFS: Mounted root (9p filesystem) on device 0:18.

Commit 6829a048102a ("NFS: Retry mounting NFSROOT") introduced retries
when mounting NFS root, which means that now we don't immediately fail
and instead it takes an additional 90+ seconds until we stop retrying,
which has revealed the issue this patch fixes.

This meant that it would take an additional 90 seconds to boot when
we're not using a device type which gets detected in order before NFS.

This patch modifies the NFS type check to require device type to be
'Root_NFS' instead of requiring the device to have an UNNAMED_MAJOR
major.  This makes boot process cleaner since we now won't go through
the NFS mounting code at all when the device isn't an NFS root
("/dev/nfs").

Signed-off-by: Sasha Levin <levinsasha928@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
12 years agoMerge branch 'fix/asoc' into for-linus
Takashi Iwai [Sat, 5 May 2012 09:27:26 +0000 (11:27 +0200)]
Merge branch 'fix/asoc' into for-linus

12 years agoMerge branch 'for-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/lrg/asoc...
Takashi Iwai [Sat, 5 May 2012 09:26:50 +0000 (11:26 +0200)]
Merge branch 'for-3.4' of git://git./linux/kernel/git/lrg/asoc into fix/asoc

12 years agoMerge tag 'asoc-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound...
Takashi Iwai [Sat, 5 May 2012 09:25:17 +0000 (11:25 +0200)]
Merge tag 'asoc-3.4' of git://git./linux/kernel/git/broonie/sound into for-linus

ASoC: Updates for 3.4

Nothing terribly exciting here, a bunch of small and simple fixes
scattered around the place.

12 years agoACPI: Fix D3hot v D3cold confusion
Lin Ming [Mon, 23 Apr 2012 01:03:49 +0000 (09:03 +0800)]
ACPI: Fix D3hot v D3cold confusion

Before this patch, ACPI_STATE_D3 incorrectly referenced D3hot
in some places, but D3cold in other places.

After this patch, ACPI_STATE_D3 always means ACPI_STATE_D3_COLD;
and all references to D3hot use ACPI_STATE_D3_HOT.

ACPI's _PR3 method is used to enter both D3hot and D3cold states.
What distinguishes D3hot from D3cold is the presence _PR3
(Power Resources for D3hot)  If these resources are all ON,
then the state is D3hot.  If _PR3 is not present,
or all _PR0 resources for the devices are OFF,
then the state is D3cold.

This patch applies after Linux-3.4-rc1.
A future syntax cleanup may remove ACPI_STATE_D3
to emphasize that it always means ACPI_STATE_D3_COLD.

Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Acked-by: Rafael J. Wysocki <rjw@sisk.pl>
Reviewed-by: Aaron Lu <aaron.lu@amd.com>
Signed-off-by: Len Brown <len.brown@intel.com>
12 years agohfsplus: Fix potential buffer overflows
Greg Kroah-Hartman [Fri, 4 May 2012 19:09:39 +0000 (12:09 -0700)]
hfsplus: Fix potential buffer overflows

Commit ec81aecb2966 ("hfs: fix a potential buffer overflow") fixed a few
potential buffer overflows in the hfs filesystem.  But as Timo Warns
pointed out, these changes also need to be made on the hfsplus
filesystem as well.

Reported-by: Timo Warns <warns@pre-sense.de>
Acked-by: WANG Cong <amwang@redhat.com>
Cc: Alexey Khoroshilov <khoroshilov@ispras.ru>
Cc: Miklos Szeredi <mszeredi@suse.cz>
Cc: Sage Weil <sage@newdream.net>
Cc: Eugene Teo <eteo@redhat.com>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Dave Anderson <anderson@redhat.com>
Cc: stable <stable@vger.kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
12 years agoMerge branch 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Fri, 4 May 2012 22:35:09 +0000 (15:35 -0700)]
Merge branch 'timers-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull timer fix from Thomas Gleixner.

* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  rtc: Fix possible null pointer dereference in rtc-mpc5121.c

12 years agoMerge git://git.samba.org/sfrench/cifs-2.6
Linus Torvalds [Fri, 4 May 2012 22:34:21 +0000 (15:34 -0700)]
Merge git://git.samba.org/sfrench/cifs-2.6

Pull CIFS fixes from Steve French.

* git://git.samba.org/sfrench/cifs-2.6:
  fs/cifs: fix parsing of dfs referrals
  cifs: make sure we ignore the credentials= and cred= options
  [CIFS] Update cifs version to 1.78
  cifs - check S_AUTOMOUNT in revalidate
  cifs: add missing initialization of server->req_lock
  cifs: don't cap ra_pages at the same level as default_backing_dev_info
  CIFS: Fix indentation in cifs_show_options

12 years agoCPU frequency drivers MAINTAINERS update
Dave Jones [Fri, 4 May 2012 16:04:17 +0000 (12:04 -0400)]
CPU frequency drivers MAINTAINERS update

Remove myself as cpufreq maintainer.
x86 driver changes can go through the regular x86/ACPI trees.
ARM driver changes through the ARM trees.
cpufreq core changes are rare these days, and can just go to lkml/direct.

Signed-off-by: Dave Jones <davej@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
12 years agoseqlock: add 'raw_seqcount_begin()' function
Linus Torvalds [Fri, 4 May 2012 22:13:54 +0000 (15:13 -0700)]
seqlock: add 'raw_seqcount_begin()' function

The normal read_seqcount_begin() function will wait for any current
writers to exit their critical region by looping until the sequence
count is even.

That "wait for sequence count to stabilize" is the right thing to do if
the read-locker will just retry the whole operation on contention: no
point in doing a potentially expensive reader sequence if we know at the
beginning that we'll just end up re-doing it all.

HOWEVER.  Some users don't actually retry the operation, but instead
will abort and do the operation with proper locking.  So the sequence
count case may be the optimistic quick case, but in the presense of
writers you may want to do full locking in order to guarantee forward
progress.  The prime example of this would be the RCU name lookup.

And in that case, you may well be better off without the "retry early",
and are in a rush to instead get to the failure handling.  Thus this
"raw" interface that just returns the sequence number without testing it
- it just forces the low bit to zero so that read_seqcount_retry() will
always fail such a "active concurrent writer" scenario.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
12 years agoFix __read_seqcount_begin() to use ACCESS_ONCE for sequence value read
Linus Torvalds [Fri, 4 May 2012 21:46:02 +0000 (14:46 -0700)]
Fix __read_seqcount_begin() to use ACCESS_ONCE for sequence value read

We really need to use a ACCESS_ONCE() on the sequence value read in
__read_seqcount_begin(), because otherwise the compiler might end up
reloading the value in between the test and the return of it.  As a
result, it might end up returning an odd value (which means that a write
is in progress).

If the reader is then fast enough that that odd value is still the
current one when the read_seqcount_retry() is done, we might end up with
a "successful" read sequence, even despite the concurrent write being
active.

In practice this probably never really happens - there just isn't
anything else going on around the read of the sequence count, and the
common case is that we end up having a read barrier immediately
afterwards.

So the code sequence in which gcc might decide to reaload from memory is
small, and there's no reason to believe it would ever actually do the
reload.  But if the compiler ever were to decide to do so, it would be
incredibly annoying to debug.  Let's just make sure.

Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
12 years agointel_mid_powerbtn: mark irq as IRQF_NO_SUSPEND
Yong Wang [Fri, 4 May 2012 21:02:44 +0000 (14:02 -0700)]
intel_mid_powerbtn: mark irq as IRQF_NO_SUSPEND

So that the power button still wakes up the platform.

Signed-off-by: Pierre Tardy <pierre.tardy@intel.com>
Link: http://lkml.kernel.org/r/20120504210244.F2EA5A018B@akpm.mtv.corp.google.com
Tested-by: Kangkai Yin <kangkai.yin@intel.com>
Tested-by: Yong Wang <yong.y.wang@intel.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Cc: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
12 years agoarch/x86/platform/geode/net5501.c: change active_low to 0 for LED driver
Bjarke Istrup Pedersen [Fri, 4 May 2012 21:01:45 +0000 (14:01 -0700)]
arch/x86/platform/geode/net5501.c: change active_low to 0 for LED driver

It seems that there was an error with the active_low = 1 for the
LED, since it should be set to 0 (meaning that active is high,
since 0 is false, hence the confusion.

The wiki article about it confuses it, since it contradicts itself,
regarding what turns on the LED.

I have tested 3.4-rc2 on my net5501 with this patch, and it makes the LED
behave correctly, where "none" turns it off, and "default-on" turns it on,
when echoed onto the trigger "file" in /sys/class/leds.

Signed-off-by: Bjarke Istrup Pedersen <gurligebis@gentoo.org>
Link: http://lkml.kernel.org/r/20120504210146.62186A018B@akpm.mtv.corp.google.com
Cc: Philip Prindeville <philipp@redfish-solutions.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
12 years agoBtrfs: fix crash in scrub repair code when device is missing
Stefan Behrens [Fri, 4 May 2012 19:16:07 +0000 (15:16 -0400)]
Btrfs: fix crash in scrub repair code when device is missing

Fix that when scrub tries to repair an I/O or checksum error and one of
the devices containing the mirror is missing, it crashes in bio_add_page
because the bdev is a NULL pointer for missing devices.

Reported-by: Marco L. Crociani <marco.crociani@gmail.com>
Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
12 years agobtrfs: Fix mismatching struct members in ioctl.h
Alexander Block [Fri, 4 May 2012 19:16:06 +0000 (15:16 -0400)]
btrfs: Fix mismatching struct members in ioctl.h

Fix the size members of btrfs_ioctl_ino_path_args and
btrfs_ioctl_logical_ino_args. The user space btrfs-progs utilities used
__u64 and the kernel headers used __u32 before.

Signed-off-by: Alexander Block <ablock84@googlemail.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
12 years agoBtrfs: fix page leak when allocing extent buffers
Josef Bacik [Fri, 4 May 2012 19:16:06 +0000 (15:16 -0400)]
Btrfs: fix page leak when allocing extent buffers

If we happen to alloc a extent buffer and then alloc a page and notice that
page is already attached to an extent buffer, we will only unlock it and
free our existing eb.  Any pages currently attached to that eb will be
properly freed, but we don't do the page_cache_release() on the page where
we noticed the other extent buffer which can cause us to leak pages and I
hope cause the weird issues we've been seeing in this area.  Thanks,

Signed-off-by: Josef Bacik <josef@redhat.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>