Rafael J. Wysocki [Thu, 18 Jun 2015 23:17:44 +0000 (01:17 +0200)]
Merge branch 'pm-cpuidle'
* pm-cpuidle:
cpuidle: Do not use CPUIDLE_DRIVER_STATE_START in cpuidle.c
cpuidle: Select a different state on tick_broadcast_enter() failures
sched / idle: Call default_idle_call() from cpuidle_enter_state()
sched / idle: Call idle_set_state() from cpuidle_enter_state()
cpuidle: Fix the kerneldoc comment for cpuidle_enter_state()
sched / idle: Eliminate the "reflect" check from cpuidle_idle_call()
cpuidle: Check the sign of index in cpuidle_reflect()
sched / idle: Move the default idle call code to a separate function
Rafael J. Wysocki [Thu, 18 Jun 2015 23:17:35 +0000 (01:17 +0200)]
Merge branch 'acpi-cca'
* acpi-cca:
ufs: fix TRUE and FALSE re-define build error
megaraid_sas: fix TRUE and FALSE re-define build error
amd-xgbe: Unify coherency checking logic with device_dma_is_coherent()
crypto: ccp - Unify coherency checking logic with device_dma_is_coherent()
device property: Introduces device_dma_is_coherent()
arm64 : Introduce support for ACPI _CCA object
ACPI / scan: Parse _CCA and setup device coherency
Rafael J. Wysocki [Thu, 18 Jun 2015 23:17:26 +0000 (01:17 +0200)]
Merge branch 'acpi-video'
* acpi-video: (38 commits)
ACPI / video: Make acpi_video_unregister_backlight() private
acpi-video-detect: Remove old API
toshiba-acpi: Port to new backlight interface selection API
thinkpad-acpi: Port to new backlight interface selection API
sony-laptop: Port to new backlight interface selection API
samsung-laptop: Port to new backlight interface selection API
msi-wmi: Port to new backlight interface selection API
msi-laptop: Port to new backlight interface selection API
intel-oaktrail: Port to new backlight interface selection API
ideapad-laptop: Port to new backlight interface selection API
fujitsu-laptop: Port to new backlight interface selection API
eeepc-laptop: Port to new backlight interface selection API
dell-wmi: Port to new backlight interface selection API
dell-laptop: Port to new backlight interface selection API
compal-laptop: Port to new backlight interface selection API
asus-wmi: Port to new backlight interface selection API
asus-laptop: Port to new backlight interface selection API
apple-gmux: Port to new backlight interface selection API
acer-wmi: Port to new backlight interface selection API
ACPI / video: Fix acpi_video _register vs _unregister_backlight race
...
Rafael J. Wysocki [Thu, 18 Jun 2015 23:17:18 +0000 (01:17 +0200)]
Merge branches 'acpi-battery' and 'acpi-processor'
* acpi-battery:
ACPI / battery: mark DMI table as __initconst
ACPI / battery: minor tweaks to acpi_battery_units()
ACPI / battery: constify the offset tables
ACPI / battery: ensure acpi_battery_init() has finish
ACPI / battery: drop useless return statements
ACPI / battery: abort initialization earlier if acpi_disabled
* acpi-processor:
ACPI / processor: constify DMI system id table
ACPI / processor: Introduce invalid_phys_cpuid()
ACPI / processor: return specific error instead of -1
ACPI / processor: remove phys_id in acpi_processor_get_info()
ACPI / processor: remove cpu_index in acpi_processor_get_info()
Xen / ACPI / processor: Remove unneeded NULL check
Xen / ACPI / processor: use invalid_logical_cpuid()
ACPI / processor: Introduce invalid_logical_cpuid()
Rafael J. Wysocki [Thu, 18 Jun 2015 23:17:03 +0000 (01:17 +0200)]
Merge branches 'acpi-ac', 'acpi-soc' and 'acpi-assorted'
* acpi-ac:
ACPI / AC: constify DMI system id table
* acpi-soc:
ACPI / LPSS: constify device descriptors
* acpi-assorted:
ACPI / HED: constify ACPI device ids
Rafael J. Wysocki [Thu, 18 Jun 2015 23:16:45 +0000 (01:16 +0200)]
Merge branch 'acpi-ec'
* acpi-ec:
ACPI / EC: Fix a code coverity issue when QR_EC transactions are failed.
ACPI / EC: Fix EC_FLAGS_QUERY_HANDSHAKE platforms using new event clearing timing.
ACPI / EC: Add event clearing variation support.
ACPI / EC: Convert event handling work queue into loop style.
ACPI / EC: Cleanup transaction state transition.
ACPI / EC: Remove non-root-caused busy polling quirks.
ACPI / EC: Add module params for polling modes.
ACPI / EC: Fix and clean up register access guarding logics.
ACPI / EC: Remove irqs_disabled() check.
ACPI / EC: Remove storming threashold enlarging quirk.
ACPI / EC: Update acpi_ec_is_gpe_raised() with new GPE status flag.
Rafael J. Wysocki [Thu, 18 Jun 2015 23:16:21 +0000 (01:16 +0200)]
Merge branches 'acpi-pm', 'acpi-apei', 'acpi-osl' and 'acpi-pci'
* acpi-pm:
ACPI / PM: Add missing pm_generic_complete() invocation
ACPI / PM: Turn power resources on and off in the right order during resume
ACPI / PM: Rework device power management to follow ACPI 6
ACPI / PM: Drop stale comment from acpi_power_transition()
* acpi-apei:
GHES: Make NMI handler have a single reader
GHES: Elliminate double-loop in the NMI handler
GHES: Panic right after detection
GHES: Carve out the panic functionality
GHES: Carve out error queueing in a separate function
* acpi-osl:
ACPI / osl: use same type for acpi_predefined_names values as in definition
* acpi-pci:
ACPI / PCI: remove stale list_head in struct acpi_prt_entry
Rafael J. Wysocki [Thu, 18 Jun 2015 23:15:49 +0000 (01:15 +0200)]
Merge branches 'acpi-init', 'acpi-pnp', 'acpi-scan', 'acpi-proc' and 'acpi-doc'
* acpi-init:
ACPI / init: Switch over platform to the ACPI mode later
* acpi-pnp:
ACPI / PNP: Avoid conflicting resource reservations
* acpi-scan:
ACPI / scan: constify ACPI device ids
ACPI / property: Define a symbol for PRP0001
ACPI / property: Refine consistency check for PRP0001
* acpi-proc:
ACPI / proc: make ACPI_PROCFS_POWER X86 only
* acpi-doc:
ACPI: Constify ACPI device IDs in documentation
ACPI / enumeration: Document the rules regarding the PRP0001 device ID
ACPI: fix kernel-parameters ordering in Documentation
Rafael J. Wysocki [Thu, 18 Jun 2015 23:15:19 +0000 (01:15 +0200)]
Merge branch 'acpica'
* acpica: (22 commits)
ACPICA: Fix for ill-formed GUID strings for NFIT tables.
ACPICA: acpihelp: Update for new NFIT table GUIDs.
ACPICA: Update version to
20150515.
ACPICA: ACPI 6.0: Add support for NFIT table.
ACPICA: acpi_help: Add option to display all known/supported ACPI tables.
ACPICA: iASL/disassembler - fix possible fault for -e option.
ACPICA: ACPI 6.0: Add changes for DRTM table.
ACPICA: ACPI 6.0: Add support for IORT table.
ACPICA: ACPI 6.0: Add ACPI_SUB_PTR().
ACPICA: ACPI 6.0: Add changes for MADT table.
ACPICA: Hardware: Fix a resource leak issue in acpi_hw_build_pci_list().
ACPICA: Dispatcher: Fix a resource leak issue in acpi_ds_auto_serialize_method().
ACPICA: ACPI 6.0: Add changes for LPIT table.
ACPICA: ACPI 6.0: Add changes for FADT table.
ACPICA: ACPI 6.0: Add support for WPBT table.
ACPICA: iASL: Enhance detection of non-ascii or corrupted input files.
ACPICA: Parser: Move a couple externals to the proper header.
ACPICA: ACPI 6.0: Add support for XENV table.
ACPICA: ACPI 6.0: Add support for new predefined names.
ACPICA: ACPI 6.0: Add support for STAO table.
...
Mathias Krause [Sat, 13 Jun 2015 12:27:00 +0000 (14:27 +0200)]
ACPI: Constify ACPI device IDs in documentation
ACPI device ID arrays normally don't need to be written to as they're
only ever read. The common usage -- embedding pointers to acpi_device_id
arrays in other data structures -- reference them as 'const', e.g. as in
struct acpi_driver / acpi_scan_handler / device_driver. The matchers are
taking const pointers, too. So it's only natural, to propose using const
arrays. Change the documentation accordingly.
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Rafael J. Wysocki [Mon, 15 Jun 2015 11:48:00 +0000 (13:48 +0200)]
ACPI / enumeration: Document the rules regarding the PRP0001 device ID
Document how the ACPI device enumeration code uses the special
PRP0001 device ID.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org>
Reviewed-by: Darren Hart <dvhart@linux.intel.com>
Hans de Goede [Tue, 16 Jun 2015 14:28:13 +0000 (16:28 +0200)]
ACPI / video: Make acpi_video_unregister_backlight() private
acpi_video_unregister_backlight() is now only used by video_detect.c
which is part of the same acpi_video module as video.c, make
acpi_video_unregister_backlight() private to this module.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Hans de Goede [Tue, 16 Jun 2015 14:28:12 +0000 (16:28 +0200)]
acpi-video-detect: Remove old API
Remove the old backlight interface selection API now that all drivers
have been ported to the new API.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Hans de Goede [Tue, 16 Jun 2015 14:28:11 +0000 (16:28 +0200)]
toshiba-acpi: Port to new backlight interface selection API
Port the backlight selection logic to the new backlight interface
selection API.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Azael Avalos <coproscefalo@gmail.com>
Acked-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Hans de Goede [Tue, 16 Jun 2015 14:28:10 +0000 (16:28 +0200)]
thinkpad-acpi: Port to new backlight interface selection API
Port the backlight selection logic to the new backlight interface
selection API.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Acked-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Hans de Goede [Tue, 16 Jun 2015 14:28:09 +0000 (16:28 +0200)]
sony-laptop: Port to new backlight interface selection API
Port the backlight selection logic to the new backlight interface
selection API.
This commit also removes various obsolete pr_xxx messages related to
backlight interface selection. These are obsolete because they assume
there is only a vendor or acpi backlight driver and no other choice.
Also they are not necessary, if the user wants to know which backlight
interfaces are registered a simple "ls /sys/class/backlight" suffices.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Mattia Dongili <malattia@linux.it>
Acked-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Hans de Goede [Tue, 16 Jun 2015 14:28:08 +0000 (16:28 +0200)]
samsung-laptop: Port to new backlight interface selection API
Port the backlight selection logic to the new backlight interface
selection API.
This commit also removes various obsolete pr_xxx messages related to
backlight interface selection. These are obsolete because they assume
there is only a vendor or acpi backlight driver and no other choice.
Also they are not necessary, if the user wants to know which backlight
interfaces are registered a simple "ls /sys/class/backlight" suffices.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Hans de Goede [Tue, 16 Jun 2015 14:28:07 +0000 (16:28 +0200)]
msi-wmi: Port to new backlight interface selection API
Port the backlight selection logic to the new backlight interface
selection API.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Hans de Goede [Tue, 16 Jun 2015 14:28:06 +0000 (16:28 +0200)]
msi-laptop: Port to new backlight interface selection API
Port the backlight selection logic to the new backlight interface
selection API.
This commit also removes various obsolete pr_xxx messages related to
backlight interface selection. These are obsolete because they assume
there is only a vendor or acpi backlight driver and no other choice.
Also they are not necessary, if the user wants to know which backlight
interfaces are registered a simple "ls /sys/class/backlight" suffices.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Hans de Goede [Tue, 16 Jun 2015 14:28:05 +0000 (16:28 +0200)]
intel-oaktrail: Port to new backlight interface selection API
Port the backlight selection logic to the new backlight interface
selection API.
This commit also removes various obsolete pr_xxx messages related to
backlight interface selection. These are obsolete because they assume
there is only a vendor or acpi backlight driver and no other choice.
Also they are not necessary, if the user wants to know which backlight
interfaces are registered a simple "ls /sys/class/backlight" suffices.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Hans de Goede [Tue, 16 Jun 2015 14:28:04 +0000 (16:28 +0200)]
ideapad-laptop: Port to new backlight interface selection API
Port the backlight selection logic to the new backlight interface
selection API.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Hans de Goede [Tue, 16 Jun 2015 14:28:03 +0000 (16:28 +0200)]
fujitsu-laptop: Port to new backlight interface selection API
Port the backlight selection logic to the new backlight interface
selection API.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Jonathan Woithe <jwoithe@just42.net>
Acked-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Hans de Goede [Tue, 16 Jun 2015 14:28:02 +0000 (16:28 +0200)]
eeepc-laptop: Port to new backlight interface selection API
Port the backlight selection logic to the new backlight interface
selection API.
This commit also removes various obsolete pr_xxx messages related to
backlight interface selection. These are obsolete because they assume
there is only a vendor or acpi backlight driver and no other choice.
Also they are not necessary, if the user wants to know which backlight
interfaces are registered a simple "ls /sys/class/backlight" suffices.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Hans de Goede [Tue, 16 Jun 2015 14:28:01 +0000 (16:28 +0200)]
dell-wmi: Port to new backlight interface selection API
Port the backlight selection logic to the new backlight interface
selection API.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pali Rohár <pali.rohar@gmail.com>
Acked-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Hans de Goede [Tue, 16 Jun 2015 14:28:00 +0000 (16:28 +0200)]
dell-laptop: Port to new backlight interface selection API
Port the backlight selection logic to the new backlight interface
selection API.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pali Rohár <pali.rohar@gmail.com>
Acked-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Hans de Goede [Tue, 16 Jun 2015 14:27:59 +0000 (16:27 +0200)]
compal-laptop: Port to new backlight interface selection API
Port the backlight selection logic to the new backlight interface
selection API.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Hans de Goede [Tue, 16 Jun 2015 14:27:58 +0000 (16:27 +0200)]
asus-wmi: Port to new backlight interface selection API
Port the backlight selection logic to the new backlight interface
selection API.
This commit also removes various obsolete pr_xxx messages related to
backlight interface selection. These are obsolete because they assume
there is only a vendor or acpi backlight driver and no other choice.
Also they are not necessary, if the user wants to know which backlight
interfaces are registered a simple "ls /sys/class/backlight" suffices.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Hans de Goede [Tue, 16 Jun 2015 14:27:57 +0000 (16:27 +0200)]
asus-laptop: Port to new backlight interface selection API
Port the backlight selection logic to the new backlight interface
selection API.
This commit also removes various obsolete pr_xxx messages related to
backlight interface selection. These are obsolete because they assume
there is only a vendor or acpi backlight driver and no other choice.
Also they are not necessary, if the user wants to know which backlight
interfaces are registered a simple "ls /sys/class/backlight" suffices.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Hans de Goede [Tue, 16 Jun 2015 14:27:56 +0000 (16:27 +0200)]
apple-gmux: Port to new backlight interface selection API
Port the backlight selection logic to the new backlight interface
selection API.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Hans de Goede [Tue, 16 Jun 2015 14:27:55 +0000 (16:27 +0200)]
acer-wmi: Port to new backlight interface selection API
Port the backlight selection logic to the new backlight interface
selection API.
This commit also removes various obsolete pr_xxx messages related to
backlight interface selection. These are obsolete because they assume
there is only a vendor or acpi backlight driver and no other choice.
Also they are not necessary, if the user wants to know which backlight
interfaces are registered a simple "ls /sys/class/backlight" suffices.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Lee, Chun-Yi <jlee@suse.com>
Acked-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Hans de Goede [Tue, 16 Jun 2015 14:27:54 +0000 (16:27 +0200)]
ACPI / video: Fix acpi_video _register vs _unregister_backlight race
It is possible for a native backlight driver to load while
acpi_video_register is running, which may lead to
acpi_video_unregister_backlight being called while acpi_video_register
is running and the 2 racing against eachother.
The register_count variable protects against this, but not in a thread
safe manner, this commit adds locking to make this thread safe.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Hans de Goede [Tue, 16 Jun 2015 14:27:53 +0000 (16:27 +0200)]
ACPI / video: Move dmi_check_system from module_init to acpi_video_register
When builtin there is no guarantee in which order module_init functions
are run, so acpi_video_register() may get called from the i915 driver
(if it is also builtin) before acpi_video_init() gets called, resulting
in the dmi quirks not yet being parsed.
This commit moves the dmi_check_system() call to acpi_video_register(),
so that we can be sure the dmi quirks have always been applied before
probing.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Hans de Goede [Tue, 16 Jun 2015 14:27:52 +0000 (16:27 +0200)]
ACPI / video: Move backlight notifier to video_detect.c
Move the unregistering of the acpi backlight interface on registering of a
native backlight from video.c to video_detect.c where it belongs.
Note this removes support for re-registering the acpi backlight interface
when the native interface goes away. In practice this never happens and
it needlessly complicates the code.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Hans de Goede [Tue, 16 Jun 2015 14:27:51 +0000 (16:27 +0200)]
ACPI / video: Port to new backlight interface selection API
Most of the patch is moving the dmi quirks for forcing use of the
acpi-video / the native backlight interface to video_detect.c.
What remains is a nice cleanup.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Hans de Goede [Tue, 16 Jun 2015 14:27:50 +0000 (16:27 +0200)]
drm: i915: Port to new backlight interface selection API
This results in a nice cleanup, as we can replace the complicated logic
from should_ignore_backlight_request() with a simple check for the type
being native.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Hans de Goede [Tue, 16 Jun 2015 14:27:49 +0000 (16:27 +0200)]
acpi-video-detect: Unregister acpi_video backlight when dmi quirks are added
Make acpi_video_set_dmi_backlight_type() call
acpi_video_unregister_backlight() when the new dmi quirk results in
the desired backlight interface being of a type other then
acpi_backlight_video.
This avoid the need for the second if in the following construction
which is currently found in many platform/x86 drivers:
if (prefer_vendor_quirk)
acpi_video_dmi_promote_vendor();
if (!acpi_video_backlight_support())
acpi_video_unregister_backlight()
This second if-block will be removed from the platform drivers as part
of their conversion to the new backlight interface selection API.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Hans de Goede [Tue, 16 Jun 2015 14:27:48 +0000 (16:27 +0200)]
acpi-video-detect: Rewrite backlight interface selection logic
Currently we have 2 kernel commandline options + dmi-quirks in 3 places all
interacting (in interesting ways) to select which which backlight interface
to use. On the commandline we've acpi_backlight=[video|vendor] and
video.use_native_backlight=[0|1]. DMI quirks we have in
acpi/video-detect.c, acpi/video.c and drivers/platform/x86/*.c .
This commit is the first step to cleaning this up, replacing the 2 cmdline
options with just acpi_backlight=[video|vendor|native|none], and adds a
new API to video_detect.c to reflect this.
Follow up commits will also move other related code, like unregistering the
acpi_video backlight interface if it was registered before other drivers
which take priority over it are loaded, to video_detect.c where this
logic really belongs.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Hans de Goede [Tue, 16 Jun 2015 14:27:47 +0000 (16:27 +0200)]
acpi-video-detect: video: Make video_detect code part of the video module
This is a preparation patch for the backlight interface selection logic
cleanup, there are 2 reasons to not always build the video_detect code
into the kernel:
1) In order for the video_detect.c to also deal with / select native
backlight interfaces on win8 systems, instead of doing this in video.c
where it does not belong, video_detect.c needs to call into the backlight
class code. Which cannot be done if it is builtin and the blacklight class
is not.
2) Currently all the platform/x86 drivers which have quirks to prefer
the vendor driver over acpi-video call acpi_video_unregister_backlight()
to remove the acpi-video backlight interface, this logic really belongs
in video_detect.c, which will cause video_detect.c to depend on symbols of
video.c and video.c already depends on video_detect.c symbols, so they
really need to be a single module.
Note that this commits make 2 changes so as to maintain 100% kernel
commandline compatibility:
1) The __setup call for the acpi_backlight= handling is moved to
acpi/util.c as __setup may only be used by code which is alwasy builtin
2) video.c is renamed to acpi_video.c so that it can be combined with
video_detect.c into video.ko
This commit also makes changes to drivers/platform/x86/Kconfig to ensure
that drivers which use acpi_video_backlight_support() from video_detect.c,
will not be built-in when acpi_video is not built in. This also changes
some "select" uses to "depends on" to avoid dependency loops.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Hans de Goede [Tue, 16 Jun 2015 14:27:46 +0000 (16:27 +0200)]
acpi-video-detect: Move acpi_osi_is_win8 to osl.c
acpi_osi_is_win8 needs access to acpi_gbl_osi_data which is not exported,
so move it to osl.c. Alternatively we could export acpi_gbl_osi_data but
that seems undesirable.
This allows video_detect.c to be build as a module, besides that
acpi_osi_is_win8() is something which does not really belong in
video_detect.c in the first place.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Hans de Goede [Tue, 16 Jun 2015 14:27:45 +0000 (16:27 +0200)]
acpi-video-detect: Move acpi_is_video_device() to acpi/scan.c
This allows video_detect.c to be build as a module, this is a preparation
patch for the backlight interface selection logic cleanup.
Note this commit also causes acpi_is_video_device() to always be build
indepedent of CONFIG_ACPI_VIDEO, as there is no reason to make its
building depend on CONFIG_ACPI_VIDEO.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Hans de Goede [Tue, 16 Jun 2015 14:27:44 +0000 (16:27 +0200)]
acpi-video-detect: Make acpi_video_get_capabilities a private function
acpi_video_get_capabilities() is only used inside video_detect.c so make
it static. While at it also remove the prototype for the non existent
acpi_video_display_switch_support function from acpi.h
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Hans de Goede [Tue, 16 Jun 2015 14:27:43 +0000 (16:27 +0200)]
acpi-video-detect: Remove the unused acpi_video_dmi_demote_vendor() function
Remove the now unused acpi_video_dmi_demote_vendor() function, this was
never a proper counter part of acpi_video_dmi_promote_vendor() since
the calls to acpi_video_dmi_promote_vendor() are not counted.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Hans de Goede [Tue, 16 Jun 2015 14:27:42 +0000 (16:27 +0200)]
apple-gmux: Stop using acpi_video_dmi_demote_vendor()
acpi_video_dmi_demote_vendor() is going away as part of the cleanup of
the code for determinging which backlight class driver(s) to register.
The call to acpi_video_dmi_demote_vendor() was meant to undo the call to
acpi_video_dmi_promote_vendor() when the gmux device is removed, this is
questionable though since the promote call sets a flag, not a counter, so
the demote call may undo a promoto done elsewhere. Moreover in practice
this is a nop since the gmux device is never removed, and the flag is only
checked when acpi/video.ko gets loaded, so even if the user manually
removes apple-gmux the demote call is still a nop as video.ko will already
have loaded by this time.
Also note that none of the other users of acpi_video_dmi_promote_vendor()
use acpi_video_dmi_demote_vendor().
If we ever encounter a system with a gmux where the acpi-video interface
should be used, then the proper fix would be to dmi-blacklist the gmux
driver on that system.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Hans de Goede [Tue, 16 Jun 2015 14:27:41 +0000 (16:27 +0200)]
samsung-laptop: Use acpi_video_unregister_backlight instead of acpi_video_unregister
acpi_video_unregister() not only unregisters the acpi-video backlight
interface but also unregisters the acpi video bus event listener, causing
e.g. brightness hotkey presses to no longer generate keypress events.
The unregistering of the acpi video bus event listener usually is
undesirable, which by itself is a good reason to switch to
acpi_video_unregister_backlight().
Another problem with using acpi_video_unregister() rather then using
acpi_video_unregister_backlight() is that on systems with an intel video
opregion (most systems) and a broken_acpi_video quirk, whether or not
the acpi video bus event listener actually gets unregistered depends on
module load ordering:
Scenario a:
1) acpi/video.ko gets loaded (*), does not do acpi_video_register as there
is an intel opregion.
2) intel.ko gets loaded, calls acpi_video_register() which registers both
the listener and the acpi backlight interface
3) samsung-laptop.ko gets loaded, calls acpi_video_unregister() causing
both the listener and the acpi backlight interface to unregister
Scenario b:
1) acpi/video.ko gets loaded (*), does not do acpi_video_register as there
is an intel opregion.
2) samsung-laptop.ko gets loaded, calls acpi_video_dmi_promote_vendor(),
calls acpi_video_unregister(), which is a nop since acpi_video_register
has not yet been called
2) intel.ko gets loaded, calls acpi_video_register() which registers
the listener, but does not register the acpi backlight interface due to
the call to the preciding call to acpi_video_dmi_promote_vendor()
*) acpi/video.ko always loads first as both other modules depend on it.
So we end up with or without an acpi video bus event listener depending
on module load ordering, not good.
Switching to using acpi_video_unregister_backlight() means that independ
of ordering we will always have an acpi video bus event listener fixing
this.
Note that this commit means that systems without an intel video opregion,
and systems which were hitting scenario a wrt module load ordering, are
now getting an acpi video bus event listener while before they were not!
On some systems this may cause the brightness hotkeys to start generating
keypresses while before they were not (good), while on other systems this
may cause the brightness hotkeys to generate multiple keypress events for
a single press (not so good). Since on most systems the acpi video bus is
the canonical source for brightness events I believe that the latter case
will needs to be handled on a case by case basis by filtering out the
duplicate keypresses at the other source for them.
Cc: Corentin Chary <corentin.chary@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Hans de Goede [Tue, 16 Jun 2015 14:27:40 +0000 (16:27 +0200)]
asus-wmi: Use acpi_video_unregister_backlight instead of acpi_video_unregister
acpi_video_unregister() not only unregisters the acpi-video backlight
interface but also unregisters the acpi video bus event listener, causing
e.g. brightness hotkey presses to no longer generate keypress events.
The unregistering of the acpi video bus event listener usually is
undesirable, which by itself is a good reason to switch to
acpi_video_unregister_backlight().
Another problem with using acpi_video_unregister() rather then using
acpi_video_unregister_backlight() is that on systems with an intel video
opregion (most systems) and a wmi_backlight_power quirk, whether or not
the acpi video bus event listener actually gets unregistered depends on
module load ordering:
Scenario a:
1) acpi/video.ko gets loaded (*), does not do acpi_video_register as there
is an intel opregion.
2) intel.ko gets loaded, calls acpi_video_register() which registers both
the listener and the acpi backlight interface
3) asus-wmi.ko gets loaded, calls acpi_video_unregister() causing both
the listener and the acpi backlight interface to unregister
Scenario b:
1) acpi/video.ko gets loaded (*), does not do acpi_video_register as there
is an intel opregion.
2) asus-wmi.ko gets loaded, calls acpi_video_dmi_promote_vendor(),
calls acpi_video_unregister(), which is a nop since acpi_video_register
has not yet been called
2) intel.ko gets loaded, calls acpi_video_register() which registers
the listener, but does not register the acpi backlight interface due to
the call to the preciding call to acpi_video_dmi_promote_vendor()
*) acpi/video.ko always loads first as both other modules depend on it.
So we end up with or without an acpi video bus event listener depending
on module load ordering, not good.
Switching to using acpi_video_unregister_backlight() means that independ
of ordering we will always have an acpi video bus event listener fixing
this.
Note that this commit means that systems without an intel video opregion,
and systems which were hitting scenario a wrt module load ordering, are
now getting an acpi video bus event listener while before they were not!
On some systems this may cause the brightness hotkeys to start generating
keypresses while before they were not (good), while on other systems this
may cause the brightness hotkeys to generate multiple keypress events for
a single press (not so good). Since on most systems the acpi video bus is
the canonical source for brightness events I believe that the latter case
will needs to be handled on a case by case basis by filtering out the
duplicate keypresses at the other source for them.
Cc: Corentin Chary <corentin.chary@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Hans de Goede [Tue, 16 Jun 2015 14:27:39 +0000 (16:27 +0200)]
apple_gmux: Use acpi_video_unregister_backlight instead of acpi_video_unregister
acpi_video_unregister() not only unregisters the acpi-video backlight
interface but also unregisters the acpi video bus event listener, causing
e.g. brightness hotkey presses to no longer generate keypress events.
The unregistering of the acpi video bus event listener usually is
undesirable, which by itself is a good reason to switch to
acpi_video_unregister_backlight().
Another problem with using acpi_video_unregister() rather then using
acpi_video_unregister_backlight() is that on systems with an intel video
opregion (most systems) whether or not the acpi video bus event listener
actually gets unregistered depends on module load ordering:
Scenario a:
1) acpi/video.ko gets loaded (*), does not do acpi_video_register as there
is an intel opregion.
2) intel.ko gets loaded, calls acpi_video_register() which registers both
the listener and the acpi backlight interface
3) apple-gmux.ko gets loaded, calls acpi_video_unregister() causing both
the listener and the acpi backlight interface to unregister
Scenario b:
1) acpi/video.ko gets loaded (*), does not do acpi_video_register as there
is an intel opregion.
2) apple-gmux.ko gets loaded, calls acpi_video_dmi_promote_vendor(),
calls acpi_video_unregister(), which is a nop since acpi_video_register
has not yet been called
2) intel.ko gets loaded, calls acpi_video_register() which registers
the listener, but does not register the acpi backlight interface due to
the call to the preciding call to acpi_video_dmi_promote_vendor()
*) acpi/video.ko always loads first as both other modules depend on it.
So we end up with or without an acpi video bus event listener depending
on module load ordering, not good.
Switching to using acpi_video_unregister_backlight() means that independ
of ordering we will always have an acpi video bus event listener fixing
this.
Note that this commit means that systems without an intel video opregion,
and systems which were hitting scenario a wrt module load ordering, are
now getting an acpi video bus event listener while before they were not!
On some systems this may cause the brightness hotkeys to start generating
keypresses while before they were not (good), while on other systems this
may cause the brightness hotkeys to generate multiple keypress events for
a single press (not so good). Since on most systems the acpi video bus is
the canonical source for brightness events I believe that the latter case
will needs to be handled on a case by case basis by filtering out the
duplicate keypresses at the other source for them.
Cc: Seth Forshee <seth.forshee@canonical.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Rafael J. Wysocki [Thu, 18 Jun 2015 16:32:02 +0000 (18:32 +0200)]
ACPI / PNP: Avoid conflicting resource reservations
Commit
b9a5e5e18fbf "ACPI / init: Fix the ordering of
acpi_reserve_resources()" overlooked the fact that the memory
and/or I/O regions reserved by acpi_reserve_resources() may
conflict with those reserved by the PNP "system" driver.
If that conflict actually takes place, it causes the reservations
made by the "system" driver to fail while before commit
b9a5e5e18fbf
all reservations made by it and by acpi_reserve_resources() would be
successful. In turn, that allows the resources that haven't been
reserved by the "system" driver to be used by others (e.g. PCI) which
sometimes leads to functional problems (up to and including boot
failures).
To fix that issue, introduce a common resource reservation routine,
acpi_reserve_region(), to be used by both acpi_reserve_resources()
and the "system" driver, that will track all resources reserved by
it and avoid making conflicting requests.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=99831
Link: http://marc.info/?t=143389402600001&r=1&w=2
Fixes:
b9a5e5e18fbf "ACPI / init: Fix the ordering of acpi_reserve_resources()"
Reported-by: Roland Dreier <roland@purestorage.com>
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Rafael J. Wysocki [Tue, 16 Jun 2015 17:59:09 +0000 (19:59 +0200)]
Merge branch 'acpi-scan' into acpi-video
Suthikulpanit, Suravee [Wed, 10 Jun 2015 16:08:58 +0000 (11:08 -0500)]
ufs: fix TRUE and FALSE re-define build error
Signed-off-by: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com>
Cc: Vinayak Holikatti <vinholikatti@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Suthikulpanit, Suravee [Wed, 10 Jun 2015 16:08:57 +0000 (11:08 -0500)]
megaraid_sas: fix TRUE and FALSE re-define build error
Signed-off-by: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com>
Cc: Kashyap Desai <kashyap.desai@avagotech.com>
Cc: Sumit Saxena <sumit.saxena@avagotech.com>
Cc: Uday Lingala <uday.lingala@avagotech.com>
Acked-by: Sumit Saxena <sumit.saxena@avagotech.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Suthikulpanit, Suravee [Wed, 10 Jun 2015 16:08:56 +0000 (11:08 -0500)]
amd-xgbe: Unify coherency checking logic with device_dma_is_coherent()
Currently, amd-xgbe driver has separate logic to determine device
coherency for DT vs. ACPI. This patch simplifies the code with
a call to device_dma_is_coherent().
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Suthikulpanit, Suravee [Wed, 10 Jun 2015 16:08:55 +0000 (11:08 -0500)]
crypto: ccp - Unify coherency checking logic with device_dma_is_coherent()
Currently, the driver has separate logic to determine device coherency
for DT vs ACPI. This patch simplifies the code with a call to
device_dma_is_coherent().
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Suthikulpanit, Suravee [Wed, 10 Jun 2015 16:08:54 +0000 (11:08 -0500)]
device property: Introduces device_dma_is_coherent()
Currently, device drivers, which support both OF and ACPI,
need to call two separate APIs, of_dma_is_coherent() and
acpi_dma_is_coherent()) to determine device coherency attribute.
This patch simplifies this process by introducing a new device
property API, device_dma_is_coherent(), which calls the appropriate
interface based on the booting architecture.
Signed-off-by: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Suthikulpanit, Suravee [Wed, 10 Jun 2015 16:08:53 +0000 (11:08 -0500)]
arm64 : Introduce support for ACPI _CCA object
section 6.2.17 _CCA states that ARM platforms require ACPI _CCA
object to be specified for DMA-cabpable devices. Therefore, this patch
specifies ACPI_CCA_REQUIRED in arm64 Kconfig.
In addition, to handle the case when _CCA is missing, arm64 would assign
dummy_dma_ops to disable DMA capability of the device.
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Mark Salter <msalter@redhat.com>
Signed-off-by: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Suthikulpanit, Suravee [Wed, 10 Jun 2015 16:08:52 +0000 (11:08 -0500)]
ACPI / scan: Parse _CCA and setup device coherency
This patch implements support for ACPI _CCA object, which is introduced in
ACPIv5.1, can be used for specifying device DMA coherency attribute.
The parsing logic traverses device namespace to parse coherency
information, and stores it in acpi_device_flags. Then uses it to call
arch_setup_dma_ops() when creating each device enumerated in DSDT
during ACPI scan.
This patch also introduces acpi_dma_is_coherent(), which provides
an interface for device drivers to check the coherency information
similarly to the of_dma_is_coherent().
Signed-off-by: Mark Salter <msalter@redhat.com>
Signed-off-by: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Rafael J. Wysocki [Mon, 15 Jun 2015 12:38:55 +0000 (14:38 +0200)]
Merge branch 'acpi-scan' into acpi-cca
Lv Zheng [Thu, 11 Jun 2015 05:21:51 +0000 (13:21 +0800)]
ACPI / EC: Fix a code coverity issue when QR_EC transactions are failed.
When the QR_EC transaction fails, the EC_FLAGS_QUERY_PENDING flag prevents
the event handling work queue from being scheduled again.
Though there shouldn't be failed QR_EC transactions, and this gap was
efficiently used for catching and learning the SCI_EVT clearing timing
compliance issues, we need to fix this as we are not fully compatible
with all platforms/Windows to handle SCI_EVT clearing timing correctly.
Fixing this gives the EC driver the chances to recover from a state machine
failure.
So this patch fixes this issue. When nr_pending_queries drops to 0, it
clears EC_FLAGS_QUERY_PENDING at the proper position for different modes in
order to ensure that the SCI_EVT handling can proceed.
In order to be clearer for future ec_event_clearing modes, all checks in
this patch are written in the inclusive style, not the exclusive style.
Cc: 3.16+ <stable@vger.kernel.org> # 3.16+
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Lv Zheng [Thu, 11 Jun 2015 05:21:45 +0000 (13:21 +0800)]
ACPI / EC: Fix EC_FLAGS_QUERY_HANDSHAKE platforms using new event clearing timing.
It is reported that on several platforms, EC firmware will not respond
non-expected QR_EC (see EC_FLAGS_QUERY_HANDSHAKE, only write QR_EC when
SCI_EVT is set).
Unfortunately, ACPI specification doesn't define when the SCI_EVT should be
cleared by the firmware, thus the original implementation queued up second
QR_EC right after writing QR_EC command and before reading the returned
event value as at that time the SCI_EVT is ensured not cleared. This
behavior is also based on the assumption that the firmware should be able
to return 0x00 to indicate "no outstanding event". This behavior did fix
issues on Samsung platforms where the spurious query value of 0x00 is
supported and didn't break platforms in my test queue.
But recently, specific Acer, Asus, Lenovo platforms keep on blaming this
change.
This patch changes the behavior to re-check the SCI_EVT a bit later and
removes EC_FLAGS_QUERY_HANDSHAKE quirks, hoping this is the Windows
compliant EC driver behavior.
In order to be robust to the possible regressions, instead of removing the
quirk directly, this patch keeps the quirk code, removes the quirk users
and keeps old behavior for Samsung platforms.
Cc: 3.16+ <stable@vger.kernel.org> # 3.16+
Link: https://bugzilla.kernel.org/show_bug.cgi?id=94411
Link: https://bugzilla.kernel.org/show_bug.cgi?id=97381
Link: https://bugzilla.kernel.org/show_bug.cgi?id=98111
Reported-and-tested-by: Gabriele Mazzotta <gabriele.mzt@gmail.com>
Reported-and-tested-by: Tigran Gabrielyan <tigrangab@gmail.com>
Reported-and-tested-by: Adrien D <ghbdtn@openmailbox.org>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Lv Zheng [Thu, 11 Jun 2015 05:21:38 +0000 (13:21 +0800)]
ACPI / EC: Add event clearing variation support.
We've been suffering from the uncertainty of the SCI_EVT clearing timing.
This patch implements 3 of 4 possible modes to handle SCI_EVT clearing
variations. The old behavior is kept in this patch.
Status: QR_EC is re-checked as early as possible after checking previous
SCI_EVT. This always leads to 2 QR_EC transactions per SCI_EVT
indication and the target may implement event queue which returns
0x00 indicating "no outstanding event".
This is proven to be a conflict against Windows behavior, but is
still kept in this patch to make the EC driver robust to the
possible regressions that may occur on Samsung platforms.
Query: QR_EC is re-checked after the target has handled the QR_EC query
request command pushed by the host.
Event: QR_EC is re-checked after the target has noticed the query event
response data pulled by the host.
This timing is not determined by any IRQs, so we may need to use a
guard period in this mode, which may explain the existence of the
ec_guard() code used by the old EC driver where the re-check timing
is implemented in the similar way as this mode.
Method: QR_EC is re-checked as late as possible after completing the _Qxx
evaluation. The target may implement SCI_EVT like a level triggered
interrupt.
It is proven on kernel bugzilla 94411 that, Windows will have all
_Qxx evaluations parallelized. Thus unless required by further
evidences, we needn't implement this mode as it is a conflict of
the _Qxx parallelism requirement.
Note that, according to the reports, there are platforms that cannot be
handled using the "Status" mode without enabling the
EC_FLAGS_QUERY_HANDSHAKE quirk. But they can be handled with the other
modes according to the tests (kernel bugzilla 97381).
The following log entry can be used to confirm the differences of the 3
modes as it should appear at the different positions for the 3 modes:
Command(QR_EC) unblocked
Status: appearing after
EC_SC(W) = 0x84
Query: appearing after
EC_DATA(R) = 0xXX
where XX is the event number used to determine _QXX
Event: appearing after first
EC_SC(R) = 0xX0 SCI_EVT=x BURST=0 CMD=0 IBF=0 OBF=0
that is next to the following log entry:
Command(QR_EC) completed by hardware
Link: https://bugzilla.kernel.org/show_bug.cgi?id=94411
Link: https://bugzilla.kernel.org/show_bug.cgi?id=97381
Link: https://bugzilla.kernel.org/show_bug.cgi?id=98111
Reported-and-tested-by: Gabriele Mazzotta <gabriele.mzt@gmail.com>
Reported-and-tested-by: Tigran Gabrielyan <tigrangab@gmail.com>
Reported-and-tested-by: Adrien D <ghbdtn@openmailbox.org>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Lv Zheng [Thu, 11 Jun 2015 05:21:32 +0000 (13:21 +0800)]
ACPI / EC: Convert event handling work queue into loop style.
During the period that a work queue is scheduled (queued up for run) but
hasn't been run, second schedule_work() could fail. This may not lead to
the loss of queries because QR_EC is always ensured to be submitted after
the work queue has been in the running state.
The event handling work queue can be changed into the loop style to allow
us to control the code in a more flexible way:
1. Makes it possible to add event=0x00 termination condition in the loop.
2. Increases the thoughput of the QR_EC transactions as the 2nd+ QR_EC
transactions may be handled in the same work item used for the 1st QR_EC
transaction, thus the delay caused by the 2nd+ work item scheduling can
be eliminated.
Except the logging message changes and the throughput improvement, this
patch is just a funcitonal no-op.
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Tested-by: Gabriele Mazzotta <gabriele.mzt@gmail.com>
Tested-by: Tigran Gabrielyan <tigrangab@gmail.com>
Tested-by: Adrien D <ghbdtn@openmailbox.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Lv Zheng [Thu, 11 Jun 2015 05:21:23 +0000 (13:21 +0800)]
ACPI / EC: Cleanup transaction state transition.
This patch collects transaction state transition code into one function. We
then could have a single function to maintain transaction transition
related behaviors. No functional changes.
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Tested-by: Gabriele Mazzotta <gabriele.mzt@gmail.com>
Tested-by: Tigran Gabrielyan <tigrangab@gmail.com>
Tested-by: Adrien D <ghbdtn@openmailbox.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Mathias Krause [Sat, 13 Jun 2015 12:26:58 +0000 (14:26 +0200)]
ACPI / scan: constify ACPI device ids
Make the button ACPI device ID array static const. Safes us a little bit
of code.
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Mathias Krause [Sat, 13 Jun 2015 12:26:57 +0000 (14:26 +0200)]
ACPI / processor: constify DMI system id table
There is no need to have processor_power_dmi_table[] writeable, constify
it.
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Mathias Krause [Sat, 13 Jun 2015 12:26:56 +0000 (14:26 +0200)]
ACPI / HED: constify ACPI device ids
Constify the acpi_hed_ids[] ACPI device IDs array -- no need to have it
writeable.
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Mathias Krause [Sat, 13 Jun 2015 12:26:50 +0000 (14:26 +0200)]
ACPI / LPSS: constify device descriptors
The device descriptors are never written to -- even pointed to as
'const' from struct lpss_private_data. Make them r/o for real.
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Mathias Krause [Sat, 13 Jun 2015 12:26:55 +0000 (14:26 +0200)]
ACPI / battery: mark DMI table as __initconst
The bat_dmi_table[] DMI table is referenced from the __init function
acpi_battery_init_async() only. It and its referenced functions can
therefore be marked __initconst to free up ~1kB of runtime memory after
initialization is done.
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Mathias Krause [Sat, 13 Jun 2015 12:26:54 +0000 (14:26 +0200)]
ACPI / battery: minor tweaks to acpi_battery_units()
Make the acpi_battery_units() function take a const argument and return
a const char*, too. Also make it static. It probably doesn't matter, as
gcc will be clever enough to optimize and inline the code even without
these hints. However, we also get rid of a #ifdef block by moving the
function closer to its usage location, so it's at least a small gain in
code readability.
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Mathias Krause [Sat, 13 Jun 2015 12:26:53 +0000 (14:26 +0200)]
ACPI / battery: constify the offset tables
The offset tables are only read, not modified. Make them const.
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Mathias Krause [Sat, 13 Jun 2015 12:26:49 +0000 (14:26 +0200)]
ACPI / AC: constify DMI system id table
There is no need to have ac_dmi_table[] writeable, constify it.
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Mathias Krause [Sat, 13 Jun 2015 12:26:59 +0000 (14:26 +0200)]
ACPI / video: constify ACPI and DMI id tables
Make the video ACPI device ID array static and constify the DMI system
IDs array. Saves us a little bit of code.
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Hans de Goede [Tue, 9 Jun 2015 08:32:25 +0000 (10:32 +0200)]
ACPI / video: Add a parameter to not register the backlight sysfs interface
On some systems acpi-video backlight is broken in the sense that it cannot
control the brightness of the backlight, but it must still be called on
resume to power-up the backlight after resume.
This commit allows these systems to work by going through all the usual
backlight control moves, while not registering a sysfs backlight
interface.
This commit also adds a quirk enabling this parameter on Toshiba Portege
R830 systems which are known to be affected by this.
I wish there was a better way to deal with this, but we've been unable to
find one.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=21012
Link: https://bugs.freedesktop.org/show_bug.cgi?id=82634
Reported-and-tested-by: Sylvain Pasche <sylvain.pasche@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Aaron Lu <aaron.lu@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Hans de Goede [Thu, 28 May 2015 16:29:48 +0000 (18:29 +0200)]
ACPI / video: Add enable_native_backlight quirk for MacbookPro12,1
It seems that the latest generation of MacbookPro needs to use the
native backlight driver, just like most modern laptops do, but it does
not automatically get enabled as the Apple BIOS does not advertise
Windows 8 compatibility. So add a quirk for this.
Reported-by: Christopher Beland <beland@alum.mit.edu>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Linus Torvalds [Mon, 15 Jun 2015 01:51:10 +0000 (15:51 -1000)]
Linux 4.1-rc8
Linus Torvalds [Mon, 15 Jun 2015 01:48:26 +0000 (15:48 -1000)]
Merge branch 'fixes' of git://git.infradead.org/users/vkoul/slave-dma
Pull dmaengine fixes from Vinod Koul:
"Here are hopefully last set of fixes for 4.1. This time we have:
- fixing pause capability reporting on both dmaengine pause & resume
support by Krzysztof
- locking fix fir at_xdmac by Ludovic
- slave configuration fix for at_xdmac by Ludovic"
* 'fixes' of git://git.infradead.org/users/vkoul/slave-dma:
dmaengine: Fix choppy sound because of unimplemented resume
dmaengine: at_xdmac: rework slave configuration part
dmaengine: at_xdmac: lock fixes
Linus Torvalds [Mon, 15 Jun 2015 01:46:43 +0000 (15:46 -1000)]
Merge tag 'ntb-4.1' of git://github.com/jonmason/ntb
Pull NTB fixes from Jon Mason:
"I apologize for the tardiness of this request. Here are a couple of
last minute NTB bug fixes for v4.1:
NTB bug fixes to address issues in unmapping the MW reg base and
vbase, and an uninitialized variable on Atom platforms"
* tag 'ntb-4.1' of git://github.com/jonmason/ntb:
ntb: initialize max_mw for Atom before using it
ntb: iounmap MW reg and vbase in error path
Linus Torvalds [Mon, 15 Jun 2015 01:38:57 +0000 (15:38 -1000)]
Merge branch 'upstream' of git://git.linux-mips.org/ralf/upstream-linus
Pull more MIPS fixes from Ralf Baechle:
"Another round of 4.1 MIPS fixes, one fix to a MIPS-specific #if
condition in lib/mpi, one fix to the MIPS GIC irqchip driver and one
SSB fix.
Details:
- fix handling of clock in chipco SSB driver.
- fix two MIPS-specific #if conditions to correctly work for GCC 5.1.
- fix damage to R6 pgtable bits done by XPA support.
- fix possible crash due to unloading modules that contain statically
defined platform devices.
- fix disabling of the MSA ASE on context switch to also work
correctly when a new thread/process has the CPU for the very first
time.
This is part of linux-next and has been beaten to death on
Imagination's test farm.
While things are not looking too grim this pull request also means the
rate of fixes for 4.1 remains nearly constant so I'd not be unhappy if
you'd delay the release"
* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus:
MPI: MIPS: Fix compilation error with GCC 5.1
IRQCHIP: mips-gic: Don't nest calls to do_IRQ()
MIPS: MSA: bugfix - disable MSA correctly for new threads/processes.
MIPS: Loongson: Do not register 8250 platform device from module.
MIPS: Cobalt: Do not build MTD platform device registration code as module.
SSB: Fix handling of ssb_pmu_get_alp_clock()
MIPS: pgtable-bits: Fix XPA damage to R6 definitions.
Linus Torvalds [Mon, 15 Jun 2015 00:53:02 +0000 (14:53 -1000)]
Merge branch 'irq-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull irqchip fix from Thomas Gleixner:
"A single fix for an off by one bug in the sunxi irqchip driver"
* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip: sunxi-nmi: Fix off-by-one error in irq iterator
Linus Torvalds [Mon, 15 Jun 2015 00:03:11 +0000 (14:03 -1000)]
Merge branch 'locking-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull lockdep fix from Ingo Molnar:
"A lockdep/modules unload race fix that can oops"
* 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
lockdep: Fix a race between /proc/lock_stat and module unload
Linus Torvalds [Mon, 15 Jun 2015 00:00:13 +0000 (14:00 -1000)]
Merge branch 'perf-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull perf fixes from Ingo Molnar:
"A regression fix for a crash, and a Intel HSW uncore PMU driver fix"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
Revert "perf/x86/intel/uncore: Move uncore_box_init() out of driver initialization"
perf/x86/intel/uncore: Fix CBOX bit wide and UBOX reg on Haswell-EP
Linus Torvalds [Sun, 14 Jun 2015 23:55:24 +0000 (13:55 -1000)]
Merge tag 'sound-4.1-rc8' of git://git./linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Most of commits are regression fixes for HD-audio: a few corner case
fixes for regmap transition, and i915 binding issues.
In addition, a quirk for another USB-audio device supporting DSD"
* tag 'sound-4.1-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda - Abort the probe without i915 binding for HSW/BDW
ALSA: hda - Re-add the lost fake mute support
ALSA: hda - Continue probing even if i915 binding fails
ALSA: hda - Don't actually write registers for caps overwrites
ALSA: hda - fix number of devices query on hotplug
ALSA: usb-audio: add native DSD support for JLsounds I2SoverUSB
Jaedon Shin [Fri, 12 Jun 2015 09:04:14 +0000 (18:04 +0900)]
MPI: MIPS: Fix compilation error with GCC 5.1
This patch fixes mips compilation error:
lib/mpi/generic_mpih-mul1.c: In function 'mpihelp_mul_1':
lib/mpi/longlong.h:651:2: error: impossible constraint in 'asm'
Signed-off-by: Jaedon Shin <jaedon.shin@gmail.com>
Cc: Linux-MIPS <linux-mips@linux-mips.org>
Patchwork: https://patchwork.linux-mips.org/patch/10546/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Rabin Vincent [Fri, 12 Jun 2015 08:01:56 +0000 (10:01 +0200)]
IRQCHIP: mips-gic: Don't nest calls to do_IRQ()
The GIC chained handlers use do_IRQ() to call the subhandlers. This
means that irq_enter() calls get nested, which leads to preempt count
looking like we're in nested interrupts, which in turn leads to all
system time being accounted as IRQ time in account_system_time().
Fix it by using generic_handle_irq(). Since these same functions are
used in some systems (if cpu_has_veic) from a low-level vectored
interrupt handler which does not go throught do_IRQ(), we need to do it
conditionally.
Signed-off-by: Rabin Vincent <rabin.vincent@axis.com>
Reviewed-by: Andrew Bresticker <abrestic@chromium.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-mips@linux-mips.org
Cc: tglx@linutronix.de
Cc: jason@lakedaemon.net
Patchwork: https://patchwork.linux-mips.org/patch/10545/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Linus Torvalds [Sat, 13 Jun 2015 06:54:16 +0000 (20:54 -1000)]
Merge git://git./linux/kernel/git/davem/net
Pull networking fixes from David Miller:
1) Fix uninitialized struct station_info in cfg80211_wireless_stats(),
from Johannes Berg.
2) Revert commit attempt to fix ipv6 protocol resubmission, it adds
regressions.
3) Endless loops can be created in bridge port lists, fix from Nikolay
Aleksandrov.
4) Don't WARN_ON() if sk->sk_forward_alloc is non-zero in
sk_clear_memalloc, it is a legal situation during swap deactivation.
Fix from Mel Gorman.
5) Fix order of disabling interrupts and unlocking NAPI in enic driver
to avoid a race. From Govindarajulu Varadarajan.
6) High and low register writes are swapped when programming the start
of periodic output in igb driver. From Richard Cochran.
7) Fix device rename handling in mpls stack, from Robert Shearman.
8) Do not trigger compaction synchronously when optimistically trying
to allocate an order 3 page in alloc_skb_with_frags() and
skb_page_frag_refill(). From Shaohua Li.
9) Authentication with COOKIE_ECHO is not handled properly in SCTP, fix
from Marcelo Ricardo Leitner.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
Doc: networking: Fix URL for wiki.wireshark.org in udplite.txt
sctp: allow authenticating DATA chunks that are bundled with COOKIE_ECHO
net: don't wait for order-3 page allocation
mpls: handle device renames for per-device sysctls
net: igb: fix the start time for periodic output signals
enic: fix memory leak in rq_clean
enic: check return value for stat dump
enic: unlock napi busy poll before unmasking intr
net, swap: Remove a warning and clarify why sk_mem_reclaim is required when deactivating swap
bridge: fix multicast router rlist endless loop
tipc: disconnect socket directly after probe failure
Revert "ipv6: Fix protocol resubmission"
cfg80211: wext: clear sinfo struct before calling driver
Masanari Iida [Fri, 12 Jun 2015 15:23:21 +0000 (00:23 +0900)]
Doc: networking: Fix URL for wiki.wireshark.org in udplite.txt
This patch fix URL (http to https) for wiki.wireshark.org.
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Marcelo Ricardo Leitner [Thu, 11 Jun 2015 17:49:46 +0000 (14:49 -0300)]
sctp: allow authenticating DATA chunks that are bundled with COOKIE_ECHO
Currently, we can ask to authenticate DATA chunks and we can send DATA
chunks on the same packet as COOKIE_ECHO, but if you try to combine
both, the DATA chunk will be sent unauthenticated and peer won't accept
it, leading to a communication failure.
This happens because even though the data was queued after it was
requested to authenticate DATA chunks, it was also queued before we
could know that remote peer can handle authenticating, so
sctp_auth_send_cid() returns false.
The fix is whenever we set up an active key, re-check send queue for
chunks that now should be authenticated. As a result, such packet will
now contain COOKIE_ECHO + AUTH + DATA chunks, in that order.
Reported-by: Liu Wei <weliu@redhat.com>
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Vlad Yasevich <vyasevich@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Fri, 12 Jun 2015 18:35:19 +0000 (11:35 -0700)]
Merge branch 'for-linus' of git://git.kernel.dk/linux-block
Pull block layer fixes from Jens Axboe:
"Remember about a week ago when I sent the last pull request for 4.1?
Well, I lied. Now, I don't want to shift the blame, but Dan, Ming,
and Richard made a liar out of me.
Here are three small patches that should go into 4.1. More
specifically, this pull request contains:
- A Kconfig dependency for the pmem block driver, so it can't be
selected if HAS_IOMEM isn't availble. From Richard Weinberger.
- A fix for genhd, making the ext_devt_lock softirq safe. This makes
lockdep happier, since we also end up grabbing this lock on release
off the softirq path. From Dan Williams.
- A blk-mq software queue release fix from Ming Lei.
Last two are headed to stable, first fixes an issue introduced in this
cycle"
* 'for-linus' of git://git.kernel.dk/linux-block:
block: pmem: Add dependency on HAS_IOMEM
block: fix ext_dev_lock lockdep report
blk-mq: free hctx->ctxs in queue's release handler
Linus Torvalds [Fri, 12 Jun 2015 18:33:03 +0000 (11:33 -0700)]
Merge tag 'md/4.1-rc7-fixes' of git://neil.brown.name/md
Pull three more md fixes from Neil Brown:
"Hasn't been a good cycle for md has it :-(
The main issue fixed here is a rare race which can result in two
reshape threads running at once, which doesn't end well.
Also a minor issue with a write to a sysfs file returning the wrong
value. Backports to 4.0-stable are indicated"
* tag 'md/4.1-rc7-fixes' of git://neil.brown.name/md:
md: make sure MD_RECOVERY_DONE is clear before starting recovery/resync
md: Close race when setting 'action' to 'idle'.
md: don't return 0 from array_state_store
Linus Torvalds [Fri, 12 Jun 2015 18:28:57 +0000 (11:28 -0700)]
Merge git://git.infradead.org/intel-iommu
Pull VT-d hardware workarounds from David Woodhouse:
"This contains a workaround for hardware issues which I *thought* were
never going to be seen on production hardware. I'm glad I checked
that before the 4.1 release...
Firstly, PASID support is so broken on existing chips that we're just
going to declare the old capability bit 28 as 'reserved' and change
the VT-d spec to move PASID support to another bit. So any existing
hardware doesn't support SVM; it only sets that (now) meaningless bit
28.
That patch *wasn't* imperative for 4.1 because we don't have PASID
support yet. But *even* the extended context tables are broken — if
you just enable the wider tables and use none of the new bits in them,
which is precisely what 4.1 does, you find that translations don't
work. It's this problem which I thought was caught in time to be
fixed before production, but wasn't.
To avoid triggering this issue, we now *only* enable the extended
context tables on hardware which also advertises "we have PASID
support and we actually tested it this time" with the new PASID
feature bit.
In addition, I've added an 'intel_iommu=ecs_off' command line
parameter to allow us to disable it manually if we need to"
* git://git.infradead.org/intel-iommu:
iommu/vt-d: Only enable extended context tables if PASID is supported
iommu/vt-d: Change PASID support to bit 40 of Extended Capability Register
David Woodhouse [Fri, 12 Jun 2015 09:15:49 +0000 (10:15 +0100)]
iommu/vt-d: Only enable extended context tables if PASID is supported
Although the extended tables are theoretically a completely orthogonal
feature to PASID and anything else that *uses* the newly-available bits,
some of the early hardware has problems even when all we do is enable
them and use only the same bits that were in the old context tables.
For now, there's no motivation to support extended tables unless we're
going to use PASID support to do SVM. So just don't use them unless
PASID support is advertised too. Also add a command-line bailout just in
case later chips also have issues.
The equivalent problem for PASID support has already been fixed with the
upcoming VT-d spec update and commit
bd00c606a ("iommu/vt-d: Change
PASID support to bit 40 of Extended Capability Register"), because the
problematic platforms use the old definition of the PASID-capable bit,
which is now marked as reserved and meaningless.
So with this change, we'll magically start using ECS again only when we
see the new hardware advertising "hey, we have PASID support and we
actually tested it this time" on bit 40.
The VT-d hardware architect has promised that we are not going to have
any reason to support ECS *without* PASID any time soon, and he'll make
sure he checks with us before changing that.
In the future, if hypothetical new features also use new bits in the
context tables and can be seen on implementations *without* PASID support,
we might need to add their feature bits to the ecs_enabled() macro.
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
NeilBrown [Fri, 12 Jun 2015 10:05:04 +0000 (20:05 +1000)]
md: make sure MD_RECOVERY_DONE is clear before starting recovery/resync
MD_RECOVERY_DONE is normally cleared by md_check_recovery after a
resync etc finished. However it is possible for raid5_start_reshape
to race and start a reshape before MD_RECOVERY_DONE is cleared. This
can lean to multiple reshapes running at the same time, which isn't
good.
To make sure it is cleared before starting a reshape, and also clear
it when reaping a thread, just to be safe.
Signed-off-by: NeilBrown <neilb@suse.de>
NeilBrown [Fri, 12 Jun 2015 09:51:27 +0000 (19:51 +1000)]
md: Close race when setting 'action' to 'idle'.
Checking ->sync_thread without holding the mddev_lock()
isn't really safe, even after flushing the workqueue which
ensures md_start_sync() has been run.
While this code is waiting for the lock, md_check_recovery could reap
the thread itself, and then start another thread (e.g. recovery might
finish, then reshape starts). When this thread gets the lock
md_start_sync() hasn't run so it doesn't get reaped, but
MD_RECOVERY_RUNNING gets cleared. This allows two threads to start
which leads to confusion.
So don't both if MD_RECOVERY_RUNNING isn't set, but if it is do
the flush and the test and the reap all under the mddev_lock to
avoid any race with md_check_recovery.
Signed-off-by: NeilBrown <neilb@suse.de>
Fixes:
6791875e2e53 ("md: make reconfig_mutex optional for writes to md sysfs files.")
Cc: stable@vger.kernel.org (v4.0+)
NeilBrown [Fri, 12 Jun 2015 09:46:44 +0000 (19:46 +1000)]
md: don't return 0 from array_state_store
Returning zero from a 'store' function is bad.
The return value should be either len length of the string
or an error.
So use 'len' if 'err' is zero.
Fixes:
6791875e2e53 ("md: make reconfig_mutex optional for writes to md sysfs files.")
Signed-off-by: NeilBrown <neilb@suse.de>
Cc: stable@vger.kernel (v4.0+)
Krzysztof Kozlowski [Wed, 10 Jun 2015 08:17:07 +0000 (17:17 +0900)]
dmaengine: Fix choppy sound because of unimplemented resume
Some drivers implement only pause operation (no resuming). Example is
pl330 where pause is needed for getting residuum. pl330 does not support
resume operation, transfer must be stopped after pause.
However for slaves this is exposed always as "pause and resume" which
introduces subtle errors on Odroid U3 board (Exynos4412 with pl330).
After adding pause function to pl330 driver the audio playback
(utilizing DMA) gets choppy after some time (approximately 24 hours).
Fix this by exposing "cmd_pause" if and only if pause and resume are
implemented.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Reported-by: gabriel@unseen.is
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: <stable@vger.kernel.org>
Fixes:
88987d2c7534 ("dmaengine: pl330: add DMA_PAUSE feature")
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Takashi Iwai [Fri, 12 Jun 2015 05:53:58 +0000 (07:53 +0200)]
ALSA: hda - Abort the probe without i915 binding for HSW/BDW
The previous patch tried to continue the probe if i915 binding fails.
For for simplicity reason, we haven't implemented abort even for
controller chips that are dedicated for HDMI/DP on HSW and BDW.
However, Mengdong suggested that this can be dangerous; BIOS may
disable gfx power well although the PCI entry for HD-audio is left,
and this may result in the unexpected behavior, kernel errors, etc.
For avoiding this situation, abort the probe at i915 binding failure
only for HSW/BDW chips selectively. For other chips, it still
continues.
Fixes:
bf06848bdbe5 ('ALSA: hda - Continue probing even if i915 binding fails')
Reported-by: Mengdong Lin <mengdong.lin@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Linus Torvalds [Fri, 12 Jun 2015 00:35:14 +0000 (17:35 -0700)]
Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux
Pull drm fixes from Dave Airlie:
"i915 and radeon fixes:
i915:
fix for connector oops regression
DDC probing fix
radeon:
two radeon reverts, along with a freeze workaround and a fix"
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
drm/radeon: Make sure radeon_vm_bo_set_addr always unreserves the BO
Revert "drm/radeon: adjust pll when audio is not enabled"
Revert "drm/radeon: don't share plls if monitors differ in audio support"
drm/radeon: fix freeze for laptop with Turks/Thames GPU.
drm/i915: Fix DDC probe for passive adapters
drm/i915: Properly initialize SDVO analog connectors
Shaohua Li [Thu, 11 Jun 2015 23:50:48 +0000 (16:50 -0700)]
net: don't wait for order-3 page allocation
We saw excessive direct memory compaction triggered by skb_page_frag_refill.
This causes performance issues and add latency. Commit
5640f7685831e0
introduces the order-3 allocation. According to the changelog, the order-3
allocation isn't a must-have but to improve performance. But direct memory
compaction has high overhead. The benefit of order-3 allocation can't
compensate the overhead of direct memory compaction.
This patch makes the order-3 page allocation atomic. If there is no memory
pressure and memory isn't fragmented, the alloction will still success, so we
don't sacrifice the order-3 benefit here. If the atomic allocation fails,
direct memory compaction will not be triggered, skb_page_frag_refill will
fallback to order-0 immediately, hence the direct memory compaction overhead is
avoided. In the allocation failure case, kswapd is waken up and doing
compaction, so chances are allocation could success next time.
alloc_skb_with_frags is the same.
The mellanox driver does similar thing, if this is accepted, we must fix
the driver too.
V3: fix the same issue in alloc_skb_with_frags as pointed out by Eric
V2: make the changelog clearer
Cc: Eric Dumazet <edumazet@google.com>
Cc: Chris Mason <clm@fb.com>
Cc: Debabrata Banerjee <dbavatar@gmail.com>
Signed-off-by: Shaohua Li <shli@fb.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Dave Airlie [Fri, 12 Jun 2015 00:11:50 +0000 (10:11 +1000)]
Merge tag 'drm-intel-fixes-2015-06-11' of git://anongit.freedesktop.org/drm-intel into drm-fixes
Fix for the regression Linus called out, and another for probing
dongles.
* tag 'drm-intel-fixes-2015-06-11' of git://anongit.freedesktop.org/drm-intel:
drm/i915: Fix DDC probe for passive adapters
drm/i915: Properly initialize SDVO analog connectors
Dave Airlie [Fri, 12 Jun 2015 00:11:14 +0000 (10:11 +1000)]
Merge branch 'drm-fixes-4.1' of git://people.freedesktop.org/~agd5f/linux into drm-fixes
Two regression reverts, and two fixes, one for a dpm boot freeze.
* 'drm-fixes-4.1' of git://people.freedesktop.org/~agd5f/linux:
drm/radeon: Make sure radeon_vm_bo_set_addr always unreserves the BO
Revert "drm/radeon: adjust pll when audio is not enabled"
Revert "drm/radeon: don't share plls if monitors differ in audio support"
drm/radeon: fix freeze for laptop with Turks/Thames GPU.
Robert Shearman [Thu, 11 Jun 2015 18:58:26 +0000 (19:58 +0100)]
mpls: handle device renames for per-device sysctls
If a device is renamed and the original name is subsequently reused
for a new device, the following warning is generated:
sysctl duplicate entry: /net/mpls/conf/veth0//input
CPU: 3 PID: 1379 Comm: ip Not tainted 4.1.0-rc4+ #20
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.7.5-20140531_083030-gandalf 04/01/2014
0000000000000000 0000000000000000 ffffffff81566aaf 0000000000000000
ffffffff81236279 ffff88002f7d7f00 0000000000000000 ffff88000db336d8
ffff88000db33698 0000000000000005 ffff88002e046000 ffff8800168c9280
Call Trace:
[<
ffffffff81566aaf>] ? dump_stack+0x40/0x50
[<
ffffffff81236279>] ? __register_sysctl_table+0x289/0x5a0
[<
ffffffffa051a24f>] ? mpls_dev_notify+0x1ff/0x300 [mpls_router]
[<
ffffffff8108db7f>] ? notifier_call_chain+0x4f/0x70
[<
ffffffff81470e72>] ? register_netdevice+0x2b2/0x480
[<
ffffffffa0524748>] ? veth_newlink+0x178/0x2d3 [veth]
[<
ffffffff8147f84c>] ? rtnl_newlink+0x73c/0x8e0
[<
ffffffff8147f27a>] ? rtnl_newlink+0x16a/0x8e0
[<
ffffffff81459ff2>] ? __kmalloc_reserve.isra.30+0x32/0x90
[<
ffffffff8147ccfd>] ? rtnetlink_rcv_msg+0x8d/0x250
[<
ffffffff8145b027>] ? __alloc_skb+0x47/0x1f0
[<
ffffffff8149badb>] ? __netlink_lookup+0xab/0xe0
[<
ffffffff8147cc70>] ? rtnetlink_rcv+0x30/0x30
[<
ffffffff8149e7a0>] ? netlink_rcv_skb+0xb0/0xd0
[<
ffffffff8147cc64>] ? rtnetlink_rcv+0x24/0x30
[<
ffffffff8149df17>] ? netlink_unicast+0x107/0x1a0
[<
ffffffff8149e4be>] ? netlink_sendmsg+0x50e/0x630
[<
ffffffff8145209c>] ? sock_sendmsg+0x3c/0x50
[<
ffffffff81452beb>] ? ___sys_sendmsg+0x27b/0x290
[<
ffffffff811bd258>] ? mem_cgroup_try_charge+0x88/0x110
[<
ffffffff811bd5b6>] ? mem_cgroup_commit_charge+0x56/0xa0
[<
ffffffff811d7700>] ? do_filp_open+0x30/0xa0
[<
ffffffff8145336e>] ? __sys_sendmsg+0x3e/0x80
[<
ffffffff8156c3f2>] ? system_call_fastpath+0x16/0x75
Fix this by unregistering the previous sysctl table (registered for
the path containing the original device name) and re-registering the
table for the path containing the new device name.
Fixes:
37bde79979c3 ("mpls: Per-device enabling of packet input")
Reported-by: Scott Feldman <sfeldma@gmail.com>
Signed-off-by: Robert Shearman <rshearma@brocade.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Richard Cochran [Thu, 11 Jun 2015 12:51:30 +0000 (14:51 +0200)]
net: igb: fix the start time for periodic output signals
When programming the start of a periodic output, the code wrongly places
the seconds value into the "low" register and the nanoseconds into the
"high" register. Even though this is backwards, it slipped through my
testing, because the re-arming code in the interrupt service routine is
correct, and the signal does appear starting with the second edge.
This patch fixes the issue by programming the registers correctly.
Signed-off-by: Richard Cochran <richardcochran@gmail.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
projects / GitHub / LineageOS / G12 / android_kernel_amlogic_linux-4.9.git / log