Greg Hackmann [Wed, 8 Jan 2014 18:57:03 +0000 (10:57 -0800)]
timerfd: support CLOCK_BOOTTIME clock
Add CLOCK_BOOTTIME support to timerfd
Signed-off-by: Greg Hackmann <ghackmann@google.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Linus Torvalds [Tue, 21 Jan 2014 19:36:20 +0000 (11:36 -0800)]
Merge tag 'for-v3.14' of git://git.infradead.org/battery-2.6
Pull battery updates from Dmitry Eremin-Solenikov:
"I'm picking up power supply maintainership from Anton Vorontov. Could
you please pull battery-2.6 git tree changes prepared for the v3.14
release.
Highlights:
- Power supply notifier
- Several drivers gained DT support
- Added Maxim 14577 driver
- Change of maintainer"
* tag 'for-v3.14' of git://git.infradead.org/battery-2.6:
MAINTAINERS: Pick up power supply maintainership
max17042_battery: Add IRQF_ONESHOT flag to use default irq handler
gpio-charger: Support wakeup events
power_supply: Add charger support for Maxim 14577
dt: Binding documentation for isp1704 charger
isp1704_charger: Add DT support
charger-manager: of_cm_parse_desc() should be static
bq2415x_charger: Add DT support
power_supply: Add power_supply_get_by_phandle
bq2415x_charger: Use power_supply notifier for automode
power: reset: Add as3722 power-off driver
mfd: AS3722: Add dt node properties for system power controller
charger-manager: Support deivce tree in charger manager driver
charger-manager: Modify the way of checking battery's temperature
power_supply: Add power_supply notifier
Linus Torvalds [Tue, 21 Jan 2014 18:58:17 +0000 (10:58 -0800)]
Merge tag 'mfd-3.14-1' of git://git.linaro.org/people/ljones/mfd
Pull MFD changes from Lee Jones:
"New drivers
- Samsung Maxim 14577; Micro USB, Regulator, IRQ Controller and
Battery Charger
- TI/National Semiconductor LP3943 I2C GPIO Expander and PWM
Generator
Existing driver adaptions
- Expansion of Wolfson Arizona DSP and High-Pass filter controls
- TI TWL6040 default Regmap support and Regcache addition/bypass
- Some nice Smatch catch fixes
- Conversion of TI OMAP-USB and TI TWL6030 to endian neutralness
- ChromeOS EC timing (delay) adaptions and added dependency on OF
- Many constifications of 'struct {mfd_cell,regmap_irq,et.al}'
- Watchdog support added for NVIDIA AS3722
- Convert functions to static in TI AM335x
- Realigned previously defeated functionality in TI AM335x
- IIO ADC-TSC concurrency dead-lock/timeout resolution
- Addition of Power Management and Clock support for Samsung core
- DEFINE_PCI_DEVICE_TABLE macro removal from MFD Subsystem
- Greater use of irqdomain functionality in ST-E AB8500
- Removal of 'include/linux/mfd/abx500/ab8500-gpio.h'
- Wolfson WM831x PMIC Power Management changes s/poweroff/shutdown/
- Device Tree documentation added for TI/Nat Semi LP3943
- Version detection and voltage tables for TI TPS6586x PMIC devices
- Simplification of Freescale MC13XXX (de-)initialisation routines
- Clean-up and simplification of the Realtek parent driver
- Added support for RTL8402 Realtek PCI-Express card reader
- Resource leak fix for Maxim 77686
- Possible suspend BUG() fix in OMAP USB TLL
- Support for new Wolfson WM5110 Revision (D)
- Testing of automatic assignment of of_node in mfd_add_device()
- Reversion of the above when it started to cause issues
- Remove legacy Platform Data from;
TI TWL Core, Qualcomm SSBI and ST-E ABx500 Pinctrl
- Clean-ups; tabbing issues, function name changes, 'drvdata = NULL'
removal, unused uninitialised warning mitigation, error
message clarity, removal of redundant/duplicate checks,
licensing (GPL -> GPL2), coding consistency, duplicate
function declaration, ret checks, commit corrections,
redundant of_match_ptr() helper removal, spelling,
#if-deffery removal and header guards name changes"
* tag 'mfd-3.14-1' of git://git.linaro.org/people/ljones/mfd: (78 commits)
mfd: wm5110: Add register patch for rev D chip
mfd: omap-usb-tll: Don't hold lock during pm_runtime_get/put_sync()
gpio: lp3943: Remove redundant of_match_ptr helper
mfd: sta2x11-mfd: Use named constants for pci_power_t values
Documentation: mfd: Fix LDO index in s2mps11.txt
mfd: Cleanup mfd-mcp-sa11x0.h header
mfd: max8997: Use "IS_ENABLED(CONFIG_OF)" for DT code.
mfd: twl6030: Fix endianness problem in IRQ handler
mfd: sec-core: Add cells for S5M8767-clocks
mfd: max14577: Remove redundant of_match_ptr helper
mfd: twl6040: Fix sparse non static symbol warning
mfd: Revert "mfd: Always assign of_node in mfd_add_device()"
mfd: rtsx: Fix sparse non static symbol warning
mfd: max77693: Set proper maximum register for MUIC regmap
mfd: max77686: Fix regmap resource leak on driver remove
mfd: Represent correct filenames in file headers
mfd: rtsx: Add support for card reader rtl8402
mfd: rtsx: Add set pull control macro and simplify rtl8411
mfd: max8997: Enforce mfd_add_devices() return value check
mfd: mc13xxx: Simplify probe() & remove()
...
Linus Torvalds [Tue, 21 Jan 2014 18:26:23 +0000 (10:26 -0800)]
Merge tag 'sound-3.14-rc1' of git://git./linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"It was holiday season, so no wonder that there are little changes in
framework level, although diffstat shows quite many changes spreaded
over sound/* directories. Most of changes are cleanups, code
refactoring and fixes.
Some highlights:
- Removal of OSS sleep_on usages by Arnd
- Simplified memalloc helper codes, drop obsoleted features; now it's
built into PCM driver instead of an individual module
- Warn if PCM buffer preallocation fails, which will show page
allocation issues more clearly
- Compress offload API updates for sample rates by Vinod
- PCM glitch workaround on ctxfi emu20k1 by Sarah
- Drop cs46xx DSP blobs, using firmware loader now
- USB-audio quitks for Plantronics Gamecom 780, Creative VF0420, and
Focusrite Saffire 6
HD-audio specifics:
- Standardize Kconfigs of HD-audio codec drivers; now "make
localmodconfig" recognizes configs properly (finally!)
- Parallel PM implementation by Mengdong
- BayleyBay/ValleyView2 board fixups
- Broadwell audio support
- Runtime PM improvement (PantherPoint, etc)
- Quirks: Dell subwooer, Gigabyte mobo jack detection oddity, Dell
AiO click noise fixes, Dell headset mic fixes, etc
- Automatic bind with HDMI codec parser without generic parser
- More AD codec fixes (since 3.12 regression) including the automatic
stereo mix support
- Common Thinkpad ACPI helper for Realtek and Conexant codecs
ASoC specifics:
- Update to the generic DMA code to support deferred probe and
managed resources
- New drivers for BCM2835 (used in Raspberry Pi), Tegra with MAX98090
and Analog Devices AXI I2S and S/PDIF controller IPs
- Device tree support for the simple card, max98090 and cs42l52
- Conversion of the Samsung drivers to native dmaengine, making them
multiplatform compatible and hopefully helping keep them more
modern and up to date.
- More regmap conversions, including a very welcome one for twl6040
from Peter Ujfalusi
- A big overhaul of the DaVinci drivers also from Peter Ujfalusi
- Lots of DMA updates from Lars-Peter
- Improvements to the constraints handling code from Lars-Peter
- A very helpful conversion of the TWL4030 driver to regmap from Peter
- A new driver for the Freescale ESAI controller from Nicolin Chen
- Conversion of some of the drivers to use params_width()
- Extensions to DPCM for use with compressed audio from Liam"
* tag 'sound-3.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (396 commits)
ASoC: dapm: Fix double prefix addition
ASoC: compress: Add suport for DPCM into compressed audio
ASoC: DPCM: make some DPCM API calls non static for compressed usage
ASoC: core: Fix possible NULL pointer dereference of pcm->config
ALSA: hda - add headset mic detect quirks for some Dell machines
ASoC: tlv320aic32x4: Fix regmap range_min
ASoC: core: Return -ENOTSUPP from set_sysclk() if no operation provided
ASoC: dapm: Change prototype of soc_widget_read
ASoC: samsung: Remove SND_DMAENGINE_PCM_FLAG_NO_RESIDUE flag
ASoC: axi-{spdif,i2s}: Remove SND_DMAENGINE_PCM_FLAG_NO_RESIDUE flag
ASoC: generic-dmaengine-pcm: Check DMA residue granularity
ASoC: generic-dmaengine-pcm: Check NO_RESIDUE flag at runtime
dma: pl330: Set residue_granularity
dma: Indicate residue granularity in dma_slave_caps
ASoC: simple-card: fix one bug to writing to the platform data
ASoC: pcm: Use snd_pcm_rate_mask_intersect() helper
ALSA: Add helper function for intersecting two rate masks
ASoC: s6000: Don't mix SNDRV_PCM_RATE_CONTINUOUS with specific rates
ASoC: fsl: Don't mix SNDRV_PCM_RATE_CONTINUOUS with specific rates
ASoC: pcm: Properly initialize hw->rate_max
...
Linus Torvalds [Tue, 21 Jan 2014 18:14:10 +0000 (10:14 -0800)]
Merge tag 'pinctrl-v3.14-1' of git://git./linux/kernel/git/linusw/linux-pinctrl
Pull bulk pin control changes from Linus Walleij:
"This has been queued and tested for a while. Lots of action here,
like in the GPIO tree, embedded stuff like this is really hot now it
seems. Details in the signed tag. I'm especially happy about the
Qualcomm driver as it is used in such a huge subset of mobile handsets
out there, and these platforms in general need better upstream support
- New driver for the Qualcomm TLMM pin controller and its msm8x74
subdriver.
- New driver for the Broadcom Capri BCM281xx SoC.
- New subdriver for the imx25 pin controller.
- New subdriver for the Tegra124 pin controller.
- Lock GPIO lines as IRQs for select combined pin control and GPIO
drivers for baytrail and sirf.
- Some semi-big refactorings and extenstions to the sirf driver.
- Lots of patching, cleanup and fixing in the Renesas "PFC" driver
and associated subdrivers as usual. It is settling down a little
bit now it seems.
- Minor fixes and incremental updates here and there as usual"
* tag 'pinctrl-v3.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (72 commits)
pinctrl: sunxi: Honor GPIO output initial vaules
pinctrl: capri: add dependency on OF
ARM: bcm11351: Enable pinctrl for Broadcom Capri SoCs
ARM: pinctrl: Add Broadcom Capri pinctrl driver
pinctrl: Add pinctrl binding for Broadcom Capri SoCs
pinctrl: Add void * to pinctrl_pin_desc
pinctrl: st: Fix a typo in probe
pinctrl: Fix some typos and grammar issues in the documentation
pinctrl: sirf: lock IRQs when starting them
pinctrl: sirf: put gpio interrupt pin into input status automatically
pinctrl: sirf: use only one irq_domain for the whole device node
pinctrl: single: fix infinite loop caused by bad mask
pinctrl: single: fix pcs_disable with bits_per_mux
pinctrl: single: fix DT bindings documentation
pinctrl: as3722: Set pin to output mode for some function
pinctrl: sirf: add pin group for USP0 with only RX or TX frame sync
pinctrl: sirf: fix the pins of sdmmc5 connected with TriG
pinctrl: sirf: add lost usp1_uart_nostreamctrl group for atlas6
pinctrl: sunxi: Add Allwinner A20 clock output pin functions
pinctrl/lantiq: fix typo
...
Linus Torvalds [Tue, 21 Jan 2014 17:40:46 +0000 (09:40 -0800)]
Merge tag 'gpio-v3.14-1' of git://git./linux/kernel/git/linusw/linux-gpio
Pull GPIO tree bulk changes from Linus Walleij:
"A big set this merge window, as we have much going on in this
subsystem. The changes to other subsystems (notably a slew of ARM
machines as I am doing away with their custom APIs) have all been
ACKed to the extent possible.
Major changes this time:
- Some core improvements and cleanups to the new GPIO descriptor API.
This seems to be working now so we can start the exodus to this
API, moving gradually away from the global GPIO numberspace.
- Incremental improvements to the ACPI GPIO core, and move the few
GPIO ACPI clients we have to the GPIO descriptor API right *now*
before we go any further. We actually managed to contain this
*before* we started to litter the kernel with yet another hackish
global numberspace for the ACPI GPIOs, which is a big win.
- The RFkill GPIO driver and all platforms using it have been
migrated to use the GPIO descriptors rather than fixed number
assignments. Tegra machine has been migrated as part of this.
- New drivers for MOXA ART, Xtensa GPIO32 and SMSC SCH311x. Those
should be really good examples of how I expect a nice GPIO driver
to look these days.
- Do away with custom GPIO implementations on a major part of the ARM
machines: ks8695, lpc32xx, mv78xx0. Make a first step towards the
same in the horribly convoluted Samsung S3C include forest. We
expect to continue to clean this up as we move forward.
- Flag GPIO lines used for IRQ on adnp, bcm-kona, em, intel-mid and
lynxpoint.
This makes the GPIOlib core aware that a certain GPIO line is used
for IRQs and can then enforce some semantics such as disallowing a
GPIO line marked as in use for IRQ to be switched to output mode.
- Drop all use of irq_set_chip_and_handler_name(). The name provided
in these cases were just unhelpful tags like "mux" or "demux".
- Extend the MCP23s08 driver to handle interrupts.
- Minor incremental improvements for rcar, lynxpoint, em 74x164 and
msm drivers.
- Some non-urgent bug fixes here and there, duplicate #includes and
that usual kind of cleanups"
Fix up broken Kconfig file manually to make this all compile.
* tag 'gpio-v3.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (71 commits)
gpio: mcp23s08: fix casting caused build warning
gpio: mcp23s08: depend on OF_GPIO
gpio: mcp23s08: Add irq functionality for i2c chips
ARM: S5P[v210|c100|64x0]: Fix build error
gpio: pxa: clamp gpio get value to [0,1]
ARM: s3c24xx: explicit dependency on <plat/gpio-cfg.h>
ARM: S3C[24|64]xx: move includes back under <mach/> scope
Documentation / ACPI: update to GPIO descriptor API
gpio / ACPI: get rid of acpi_gpio.h
gpio / ACPI: register to ACPI events automatically
mmc: sdhci-acpi: convert to use GPIO descriptor API
ARM: s3c24xx: fix build error
gpio: f7188x: set can_sleep attribute
gpio: samsung: Update documentation
gpio: samsung: Remove hardware.h inclusion
gpio: xtensa: depend on HAVE_XTENSA_GPIO32
gpio: clps711x: Enable driver compilation with COMPILE_TEST
gpio: clps711x: Use of_match_ptr()
net: rfkill: gpio: convert to descriptor-based GPIO interface
leds: s3c24xx: Fix build failure
...
Linus Torvalds [Tue, 21 Jan 2014 17:39:37 +0000 (09:39 -0800)]
Merge branch 'i2c/for-next' of git://git./linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang:
"For 3.14, the I2C subsystem has the following to offer:
- new drivers for Renesas RIIC and RobotFuzz OSIF
- driver cleanups & improvements & bugfixes
Pretty standard stuff this time, I'd say. There is more complex stuff
coming up, but I didn't have the bandwidth between the years to pull
it in for this release. Sadly"
* 'i2c/for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (26 commits)
i2c: s3c2410: fix quirk usage for 64-bit
i2c: pnx: Use devm_*() functions
i2c: at91: add a new compatibility string for the at91sam9261
i2c-ismt: support I2C_SMBUS_I2C_BLOCK_DATA transaction type
i2c: Add bus driver for for OSIF USB i2c device.
i2c: i2c-tiny-usb: Remove RobotFuzz USB vendor:product ID
i2c: designware: remove HAVE_CLK build dependecy
Documentation: i2c: Remove obsolete example
i2c: nomadik: remove platform data header
i2c: nomadik: auto-calculate slave setup time
i2c: viperboard: remove superfluous assignment
i2c: xilinx: Use devm_* functions
i2c: xilinx: Do not enable irq before irq handler
i2c: xilinx: Fix i2c checkpatch warnings
i2c: at91: document clock properties
i2c: isch: Use devm_request_region()
i2c: viperboard: Use devm_kzalloc() functions
i2c: imx: propagate irq error code in probe
i2c: s3c2410: dont need CPU_FREQ transitions for exynos series
i2c: s3c2410: Add polling mode support
...
Linus Torvalds [Tue, 21 Jan 2014 17:06:02 +0000 (09:06 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/jmorris/linux-security
Pull security layer updates from James Morris:
"Changes for this kernel include maintenance updates for Smack, SELinux
(and several networking fixes), IMA and TPM"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (39 commits)
SELinux: Fix memory leak upon loading policy
tpm/tpm-sysfs: active_show() can be static
tpm: tpm_tis: Fix compile problems with CONFIG_PM_SLEEP/CONFIG_PNP
tpm: Make tpm-dev allocate a per-file structure
tpm: Use the ops structure instead of a copy in tpm_vendor_specific
tpm: Create a tpm_class_ops structure and use it in the drivers
tpm: Pull all driver sysfs code into tpm-sysfs.c
tpm: Move sysfs functions from tpm-interface to tpm-sysfs
tpm: Pull everything related to /dev/tpmX into tpm-dev.c
char: tpm: nuvoton: remove unused variable
tpm: MAINTAINERS: Cleanup TPM Maintainers file
tpm/tpm_i2c_atmel: fix coccinelle warnings
tpm/tpm_ibmvtpm: fix unreachable code warning (smatch warning)
tpm/tpm_i2c_stm_st33: Check return code of get_burstcount
tpm/tpm_ppi: Check return value of acpi_get_name
tpm/tpm_ppi: Do not compare strcmp(a,b) == -1
ima: remove unneeded size_limit argument from ima_eventdigest_init_common()
ima: update IMA-templates.txt documentation
ima: pass HASH_ALGO__LAST as hash algo in ima_eventdigest_init()
ima: change the default hash algorithm to SHA1 in ima_eventdigest_ng_init()
...
Charles Keepax [Thu, 9 Jan 2014 11:53:54 +0000 (11:53 +0000)]
mfd: wm5110: Add register patch for rev D chip
Evaluation of revision D of WM5110 suggests updates to the register
patch for optimal performance. For the sake of clarity rev C of the chip
does not require a register patch.
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Roger Quadros [Wed, 8 Jan 2014 07:15:33 +0000 (12:45 +0530)]
mfd: omap-usb-tll: Don't hold lock during pm_runtime_get/put_sync()
pm_runtime_get/put_sync() can sleep so don't hold spinlock while
calling them.
This patch prevents a BUG() during system suspend when
CONFIG_DEBUG_ATOMIC_SLEEP is enabled.
Bug is present in Kernel versions v3.9 onwards.
Reported-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Roger Quadros <rogerq@ti.com>
Tested-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Sachin Kamat [Tue, 7 Jan 2014 06:27:18 +0000 (11:57 +0530)]
gpio: lp3943: Remove redundant of_match_ptr helper
'lp3943_gpio_of_match' is always compiled in. Hence the
helper macro is not needed.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Julia Lawall [Thu, 2 Jan 2014 23:40:29 +0000 (00:40 +0100)]
mfd: sta2x11-mfd: Use named constants for pci_power_t values
If nothing more than to improve code readability.
The semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)
// <smpl>
@@
expression pdev;
@@
pci_set_power_state(pdev,
- 0
+ PCI_D0
)
// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Sachin Kamat [Tue, 24 Dec 2013 09:23:25 +0000 (14:53 +0530)]
Documentation: mfd: Fix LDO index in s2mps11.txt
LDO indices start from 1. Fix the example appropriately.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Sachin Kamat [Mon, 30 Dec 2013 06:24:56 +0000 (11:54 +0530)]
mfd: Cleanup mfd-mcp-sa11x0.h header
Commit
a1fd844c6e62 ("ARM: sa1100: move platform_data definitions")
moved the file to the current location but forgot to remove the pointer
to its previous location. Clean it up. While at it also change the header
file protection macros appropriately.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Manish Badarkhe [Sun, 22 Dec 2013 17:48:49 +0000 (23:18 +0530)]
mfd: max8997: Use "IS_ENABLED(CONFIG_OF)" for DT code.
Instead of "#if define CONFIG_OF" use "IS_ENABLED(CONFIG_OF)"
option for DT code to avoid if-deffery in code.
Signed-off-by: Manish Badarkhe <badarkhe.manish@gmail.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Danke Xie [Mon, 23 Dec 2013 17:11:46 +0000 (19:11 +0200)]
mfd: twl6030: Fix endianness problem in IRQ handler
The current TWL 6030 IRQ handler assumes little endianness.
This change makes it endian-neutral.
Signed-off-by: Danke Xie <d.xie@sta.samsung.com>
Signed-off-by: Taras Kondratiuk <taras.kondratiuk@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Tushar Behera [Thu, 26 Dec 2013 10:19:00 +0000 (15:49 +0530)]
mfd: sec-core: Add cells for S5M8767-clocks
S5M8767 chip has 3 crystal oscillators running at 32KHz. These are
supported by s2mps11-clk driver.
Signed-off-by: Tushar Behera <tushar.behera@linaro.org>
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Sachin Kamat [Sat, 21 Dec 2013 10:20:16 +0000 (15:50 +0530)]
mfd: max14577: Remove redundant of_match_ptr helper
'max14577_dt_match' is always compiled in. Hence the helper macro
is not needed.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Wei Yongjun [Sat, 21 Dec 2013 02:14:13 +0000 (10:14 +0800)]
mfd: twl6040: Fix sparse non static symbol warning
Fixes the following sparse warning:
drivers/mfd/twl6040.c:89:20: warning:
symbol 'twl6040_patch' was not declared. Should it be static?
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Lee Jones [Fri, 20 Dec 2013 14:21:16 +0000 (14:21 +0000)]
mfd: Revert "mfd: Always assign of_node in mfd_add_device()"
This reverts commit
68044bee13770918e0b28dd44aa98c889ec7558f.
We've had confirmed reports of this patch causing unforeseen issues
with existing MFD users. It has been agreed by the original author
and myself that reversion is the best solution.
Acked-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Wei Yongjun [Fri, 20 Dec 2013 02:50:30 +0000 (10:50 +0800)]
mfd: rtsx: Fix sparse non static symbol warning
Fixes the following sparse warning:
drivers/mfd/rtl8411.c:473:6: warning:
symbol 'rtl8411_init_common_params' was not declared. Should it be static?
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Krzysztof Kozlowski [Fri, 20 Dec 2013 09:35:08 +0000 (10:35 +0100)]
mfd: max77693: Set proper maximum register for MUIC regmap
The MUIC block in max77693 has different I2C address than PMIC. The
driver allocated two regmaps: for PMIC and MUIC. However it used the
same regmap_config (with max_register field) for both regmaps. Actual
maximum address of register for MUIC is different than for PMIC.
Define another regmap_config for MUIC with proper max_register value.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Krzysztof Kozlowski [Fri, 20 Dec 2013 09:35:07 +0000 (10:35 +0100)]
mfd: max77686: Fix regmap resource leak on driver remove
The regmap used by max77686 MFD driver was not freed with regmap_exit()
on driver exit. This lead to leak of resources.
Replace regmap_init_i2c() call in driver probe with initialization of
managed register map so the regmap will be properly freed by the device
management code.
Cc: stable@vger.kernel.org
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Laszlo Papp [Thu, 19 Dec 2013 13:08:43 +0000 (13:08 +0000)]
mfd: Represent correct filenames in file headers
The original author(s) probably copy/pasted these headers from the
existing public header files.
Signed-off-by: Laszlo Papp <lpapp@kde.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Micky Ching [Wed, 18 Dec 2013 02:03:13 +0000 (10:03 +0800)]
mfd: rtsx: Add support for card reader rtl8402
rtl8402 is much like rtl8411, so just add it to rtl8411.c
Signed-off-by: Micky Ching <micky_ching@realsil.com.cn>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Micky Ching [Wed, 18 Dec 2013 02:03:12 +0000 (10:03 +0800)]
mfd: rtsx: Add set pull control macro and simplify rtl8411
Add set pull control macro to reduce code for setting pull control, and
use a common init function to reduce code for rtl8411.c. So this patch
is used to just simplify code.
Signed-off-by: Micky Ching <micky_ching@realsil.com.cn>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Laszlo Papp [Tue, 17 Dec 2013 12:49:51 +0000 (12:49 +0000)]
mfd: max8997: Enforce mfd_add_devices() return value check
The original author provided a random return value check which is
redundant and seemingly floating. This patch not only relocates
the check so it is more clearly associated with the invokation of
mfd_add_devices(), but provides a store for the error value. We
also print a meaningful message on error before returning.
Signed-off-by: Laszlo Papp <lpapp@kde.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Alexander Shiyan [Sat, 14 Dec 2013 13:03:12 +0000 (17:03 +0400)]
mfd: mc13xxx: Simplify probe() & remove()
This patch simplifies probe() and remove() functions by moving
some initialisation code out from the I2C/SPI init() and exit()
functions and into the core driver.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Alexander Shiyan [Sat, 14 Dec 2013 13:03:10 +0000 (17:03 +0400)]
mfd: mc13xxx: Remove useless symbol MFD_MC13783
Symbol MFD_MC13783 always selected by MFD_MC13XXX, so no need
to keep additional symbol.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Alexander Shiyan [Sat, 14 Dec 2013 13:03:11 +0000 (17:03 +0400)]
mfd: mc13xxx: Remove duplicate mc13xxx_get_flags() declaration
mc13xxx_get_flags() declaration given twice.
This patch removes this duplicate.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Stephen Boyd [Tue, 10 Dec 2013 23:35:19 +0000 (15:35 -0800)]
mfd: ssbi: Mark match table const
This is a read-only data structure.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Stephen Boyd [Tue, 10 Dec 2013 23:35:17 +0000 (15:35 -0800)]
mfd: ssbi: Constify buffer in ssbi_write
In preparation for passing a const pointer directly to
ssbi_write() from the regmap APIs.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Stephen Boyd [Tue, 10 Dec 2013 23:35:16 +0000 (15:35 -0800)]
mfd: ssbi: Remove platform data structs and hide ssbi type enum
The ssbi driver assumes that the device is DT based. Remove the
platform data structs that will never be used and hide the enum
in the only C file that uses it.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Stephen Warren [Mon, 9 Dec 2013 22:06:47 +0000 (15:06 -0700)]
mfd: Always assign of_node in mfd_add_device()
mfd_add_device() assigns .of_node in the device objects it creates only
if the mfd_cell for the device has the .of_compatible field set and the
DT node for the top-level MFD device contains a child whose compatible
property matches the cell's .of_compatible field.
This leaves .of_node unset in many cases. When this happens, entries in
the DT /aliases property which refer to the top-level MFD DT node will
never match the MFD child devices, hence causing the requested alias not
to be honored.
Solve this by setting each MFD child device's .of_node equal to the top-
level MFD device's .of_node field in the cases where it would otherwise
remain unset.
The first use-case for this will be aliases for the TPS6586x's RTC
device.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Rhyland Klein [Mon, 9 Dec 2013 11:36:09 +0000 (12:36 +0100)]
mfd: cros ec: spi: Add delay for raising CS
The EC has specific timing it requires. Add support for an optional delay
after raising CS to fix timing issues. This is configurable based on
a DT property "google,cros-ec-spi-msg-delay".
If this property isn't set, then no delay will be added. However, if set
it will cause a delay equal to the value passed to it to be inserted at
the end of a transaction.
Signed-off-by: Rhyland Klein <rklein@nvidia.com>
Reviewed-by: Bernie Thompson <bhthompson@chromium.org>
Reviewed-by: Andrew Bresticker <abrestic@chromium.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Thierry Reding [Mon, 9 Dec 2013 11:36:10 +0000 (12:36 +0100)]
mfd: cros ec: spi: Use 0 instead of '\0' consistently
memset() was being called with the second parameter set to '\0', which
is equivalent but longer than the more canonical 0. Update the code to
use the latter variant consistently across the driver.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Thierry Reding [Mon, 9 Dec 2013 10:05:39 +0000 (11:05 +0100)]
mfd: cros ec: spi: Depend on OF
The driver is not used on any non-DT platform, so it can depend on the
OF Kconfig symbol to make that explicit. This is in preparation of a
subsequent patch which parses some parameters from the device tree and
would otherwise have to conditionalize that code.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Thierry Reding [Mon, 9 Dec 2013 10:05:38 +0000 (11:05 +0100)]
mfd: cros ec: spi: Use correct module license
According to the header comment in the source file the driver is
licensed under GPL v2, so update MODULE_LICENSE() to match that.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Wei Yongjun [Sat, 7 Dec 2013 06:02:15 +0000 (14:02 +0800)]
mfd: sec-core: Fix sparse NULL pointer warning
Fixes the following sparse warning:
drivers/mfd/sec-core.c:202:16: warning: Using plain integer as NULL pointer
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Wei Yongjun [Sat, 7 Dec 2013 06:03:00 +0000 (14:03 +0800)]
mfd: sta2x11-mfd: Fix return value check in sta2x11_mfd_platform_probe()
In case of error, the function devm_regmap_init_mmio() returns
ERR_PTR() and never returns NULL. The NULL test in the return
value check should be replaced with IS_ERR().
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Alexander Shiyan [Sat, 7 Dec 2013 09:00:43 +0000 (13:00 +0400)]
mfd: mc13xxx: Remove redundant checks
Checking for maximal register is already provided by regmap API,
so remove redundant checks.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Stefan Agner [Fri, 6 Dec 2013 12:51:46 +0000 (13:51 +0100)]
regulator: tps6586x: Add and use correct voltage table
Depending on the regulator version, the voltage table might be
different. Use version specific regulator tables in order to select
correct voltage table. For the following regulator versions different
voltage tables are now used:
* TPS658623: Use correct voltage table for SM2
* TPS658643: New voltage table for SM2
Both versions are in use on the Colibri T20 module. Make use of the
correct tables by requesting the correct SM2 voltage of 1.8V.
This change is not backward compatible since an old driver is not able
to correctly set that value. The value 1.8V is out of range for the old
driver and will refuse to probe the device. The regulator starts with
default settings and the driver shows appropriate error messages.
On Colibri T20, the old value used to work with TPS658623 since the
driver applied a wrong voltage table too. However, the TPS658643 used
on V1.2 devices uses yet another voltage table and those broke that
pseudo-compatibility. The regulator driver now has the correct voltage
table for both regulator versions and those the correct voltage can be
used in the device tree.
Signed-off-by: Stefan Agner <stefan@agner.ch>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Acked-by: Mark Brown <broonie@linaro.org>
Acked-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Stefan Agner [Fri, 6 Dec 2013 12:51:45 +0000 (13:51 +0100)]
mfd: tps6586x: Add version detection
Use the VERSIONCRC to determine the exact device version. According to
the datasheet this register can be used as device identifier. The
identification is needed since some tps6586x regulators use a different
voltage table.
Signed-off-by: Stefan Agner <stefan@agner.ch>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Acked-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Milo Kim [Fri, 6 Dec 2013 02:18:43 +0000 (11:18 +0900)]
pwm: Add LP3943 PWM driver
This is the other of the LP3943 MFD driver.
LP3943 can be used as a PWM generator, up to 2 channels.
* Two PWM generators supported
* Supported PWM operations
request, free, config, enable and disable
* Pin assignment
A driver data, 'pin_used' is checked when a PWM is requested.
If the output pin is already assigned, then returns as failure.
If the pin is available, 'pin_used' is set.
When the PWM is not used anymore, then it is cleared.
It is defined as unsigned long type for atomic bit operation APIs,
but only LSB 16bits are used because LP3943 has 16 outputs.
Signed-off-by: Milo Kim <milo.kim@ti.com>
Acked-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Milo Kim [Fri, 6 Dec 2013 02:18:41 +0000 (11:18 +0900)]
mfd: Add LP3943 MFD driver
LP3943 has 16 output pins which can be used as GPIO expander and PWM generator.
* Regmap I2C interface for R/W LP3943 registers
* Atomic operations for output pin assignment
The driver should check whether requested pin is available or not.
If the pin is already used, pin request returns as a failure.
A driver data, 'pin_used' is checked when gpio_request() and
pwm_request() are called. If the pin is available, then pin_used is set.
And it is cleared when gpio_free() and pwm_free().
* Device tree support
Compatible strings for GPIO and PWM driver.
LP3943 platform data is PWM related, so parsing the device tree is
implemented in the PWM driver.
Signed-off-by: Milo Kim <milo.kim@ti.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Milo Kim [Fri, 6 Dec 2013 02:18:42 +0000 (11:18 +0900)]
gpio: add LP3943 I2C GPIO expander driver
This is one of LP3943 MFD driver.
LP3943 is configurable as a GPIO expander, up to 16 GPIOs.
* Application note: how to configure LP3943 as a GPIO expander
http://www.ti.com/lit/an/snva287a/snva287a.pdf
* Supported GPIO controller operations
request, free, direction_input, direction_output, get and set
* GPIO direction register not supported
LP3943 doesn't have the GPIO direction register. It only provides input and
output status registers.
So, private data for the direction should be handled manually.
This variable is updated whenever the direction is changed and
used in 'get' operation.
* Pin assignment
A driver data, 'pin_used' is checked when a GPIO is requested.
If the GPIO is already assigned, then returns as failure.
If the GPIO is available, 'pin_used' is set.
When the GPIO is not used anymore, then it is cleared.
It is defined as unsigned long type for atomic bit operation APIs,
but only LSB 16bits are used because LP3943 has 16 outputs.
Signed-off-by: Milo Kim <milo.kim@ti.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Milo Kim [Fri, 6 Dec 2013 02:18:44 +0000 (11:18 +0900)]
Documentation: Add LP3943 DT bindings and document
Bindings for LP3943 MFD, GPIO and PWM controller are added.
Signed-off-by: Milo Kim <milo.kim@ti.com>
Acked-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Dan Carpenter [Wed, 4 Dec 2013 14:07:12 +0000 (17:07 +0300)]
mfd: max14577: Cleanup an error message
"pdata" is a NULL not an ERR_PTR so there is no use printing it.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Mark Brown [Fri, 8 Nov 2013 18:51:25 +0000 (18:51 +0000)]
mfd: wm831x: Use PM ops for shutdown
This helps move us towards removing the bus custom operations.
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Linus Walleij [Tue, 3 Dec 2013 14:11:54 +0000 (15:11 +0100)]
mfd: ab8500: Use irqdomain to map interrupts
All subdrivers use the irqdomain to demux AB8500 IRQs but here
in the hierarchical path we find a leftover instance using the
hard-coded IRQ base. Convert it to use irqdomain with a
oneliner.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Lee Jones [Tue, 3 Dec 2013 09:26:33 +0000 (17:26 +0800)]
mfd: rtsx: Prevent 'used uninitialised' warnings
drivers/mfd/rtl8411.c: In function 'rtl8411_fetch_vendor_settings':
drivers/mfd/rtl8411.c:58:7: warning: 'reg1' is used uninitialized in this function [-Wuninitialized]
drivers/mfd/rtl8411.c: In function 'rtl8411b_fetch_vendor_settings':
drivers/mfd/rtl8411.c:79:7: warning: 'reg' is used uninitialized in this function [-Wuninitialized]
drivers/mfd/rtl8411.c: In function 'rtl8411_fetch_vendor_settings':
drivers/mfd/rtl8411.c:69:26: warning: 'reg3' may be used uninitialized in this function [-Wuninitialized]
Tested-by: Micky Ching <micky_ching@realsil.com.cn>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Jingoo Han [Mon, 2 Dec 2013 23:15:39 +0000 (08:15 +0900)]
mfd: Remove DEFINE_PCI_DEVICE_TABLE macro
Don't use DEFINE_PCI_DEVICE_TABLE macro, because this macro
is not preferred.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Linus Walleij [Tue, 3 Dec 2013 14:50:49 +0000 (15:50 +0100)]
mfd/pinctrl: Delete platform data header
This deletes the special AB8500 GPIO platform data passing
header and merges the few remaining contents down into the
abx500 pinctrl driver which handles the abx500 GPIO device.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Linus Walleij [Tue, 3 Dec 2013 14:50:34 +0000 (15:50 +0100)]
mfd: ab8500: Delete all GPIO platform data instances
This deletes all instances where the AB8500 GPIO platform
data is passed around. It is completely unused in the kernel
now, so it does not hurt anyone.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Lee Jones [Tue, 21 Jan 2014 08:26:55 +0000 (08:26 +0000)]
Merge tag 'ib-iio-input-3.13-1' into for-mfd-next
Immutable branch for IIO and Input
Lee Jones [Tue, 21 Jan 2014 08:26:12 +0000 (08:26 +0000)]
Merge tag 'ib-asoc-3.14.2' into for-mfd-next
Immutable branch between MFD and ASoC due for the v3.14 merge window
Lee Jones [Tue, 21 Jan 2014 08:23:16 +0000 (08:23 +0000)]
Merge tag 'tags/ib-asoc-1' into for-mfd-next
Immutable branch for ASoC, as requested by Mark Brown
Linus Walleij [Tue, 3 Dec 2013 14:50:17 +0000 (15:50 +0100)]
pinctrl: abx500: Delete non-devicetree probe path
All instances of this device are now coming from device tree-
enabled platforms probing without using platform data.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Tony Lindgren [Sat, 16 Nov 2013 00:36:03 +0000 (16:36 -0800)]
mfd: twl-core: Fix passing of platform data in the device tree case
Since we still need to rely on a mix of device tree initialized
drivers and legacy platform data initialize drivers, let's fix
the passing of platform data to twl4030-gpio.
As the twl4030 GPIO is initialized by twl-core.c, we need to register
the auxdata for twl4030 GPIO in twl-core.c.
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Ruslan Ruslichenko [Thu, 21 Nov 2013 12:13:28 +0000 (14:13 +0200)]
mfd: twl-core: Clean up module by removing twl603x pdata handling
Since currently nobody uses TWL603x platform data and all new
users will supply it through device tree, handling of these
data within twl-core will never be used, so remove it.
Signed-off-by: Ruslan Ruslichenko <ruslan.ruslichenko@globallogic.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Krzysztof Kozlowski [Thu, 28 Nov 2013 08:09:43 +0000 (09:09 +0100)]
mfd: sec: Constify regmap configs and regmap irqs
Add "const" to "static struct regmap_irq" and "static struct
regmap_config".
Acked-by: Sangbeom Kim <sbkim73@samsung.com>
Reviewed-by: Mark Brown <broonie@linaro.org>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Krzysztof Kozlowski [Wed, 27 Nov 2013 14:16:17 +0000 (15:16 +0100)]
mfd: max14577: Match regulator by of_compatible string
Match max14577 regulator driver by of_compatible specified in mfd_cell.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Chanwoo Choi [Fri, 22 Nov 2013 15:51:05 +0000 (16:51 +0100)]
mfd: max14577: Add max14577 MFD driver core
This patch adds max14577 core/irq driver to support MUIC(Micro USB IC)
device and charger device and support irq domain method to control
internal interrupt of max14577 device. Also, this patch supports DT
binding with max14577_i2c_parse_dt().
The MAXIM 14577 chip contains Micro-USB Interface Circuit and Li+ Battery
Charger. It contains accessory and USB charger detection logic. It supports
USB 2.0 Hi-Speed, UART and stereo audio signals over Micro-USB connector.
The battery charger is compliant with the USB Battery Charging Specification
Revision 1.1. It has also SFOUT LDO output for powering USB devices.
Reviewed-by: Mark Brown <broonie@linaro.org>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Krzysztof Kozlowski [Tue, 26 Nov 2013 13:50:27 +0000 (14:50 +0100)]
mfd: sec: Add PM ops and make it a wake up source
Add PM suspend/resume ops to the sec MFD core driver and make it a wake
up source. This allows proper waking from suspend to RAM and also fixes
broken interrupts after resuming:
[ 42.705703] sec_pmic 7-0066: Failed to read IRQ status: -5
Interrupts stop working after first resume initiated by them (e.g. by
RTC Alarm interrupt) because interrupt registers were not cleared properly.
When device is woken up from suspend by RTC Alarm, an interrupt occurs
before resuming I2C bus controller. The interrupt is handled by
regmap_irq_thread which tries to read RTC registers. This read fails
(I2C is still suspended) and RTC Alarm interrupt is disabled.
Disable the S5M8767 interrupts during suspend (disable_irq()) and enable
them during resume so the device will be still woken up but the interrupt
won't happen before resuming I2C bus.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Thierry Reding [Mon, 25 Nov 2013 12:22:31 +0000 (13:22 +0100)]
mfd: cros ec: i2c: Use consistent function names
Rename cros_ec_{probe,remove}_i2c() to cros_ec_i2c_{probe,remove}() for
consistency.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Thierry Reding [Mon, 25 Nov 2013 12:22:30 +0000 (13:22 +0100)]
mfd: cros ec: spi: Use consistent function names
Rename cros_ec_{probe,remove}_spi() to cros_ec_spi_{probe,remove}() for
consistency.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Jingoo Han [Mon, 25 Nov 2013 03:27:29 +0000 (12:27 +0900)]
mfd: mc13xxx: Remove unnecessary spi_set_drvdata()
The driver core clears the driver data to NULL after device_release
or on probe failure. Thus, it is not needed to manually clear the
device driver data to NULL.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Linus Torvalds [Tue, 21 Jan 2014 00:13:02 +0000 (16:13 -0800)]
Merge tag 'usb-3.14-rc1' of git://git./linux/kernel/git/gregkh/usb
Pull USB updates from Greg KH:
"Here's the big USB pull request for 3.14-rc1
Lots of little things all over the place, and the usual USB gadget
updates, and XHCI fixes (some for an issue reported by a lot of
people). USB PHY updates as well as chipidea updates and fixes.
All of these have been in the linux-next tree with no reported issues"
* tag 'usb-3.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (318 commits)
usb: chipidea: udc: using MultO at TD as real mult value for ISO-TX
usb: chipidea: need to mask INT_STATUS when write otgsc
usb: chipidea: put hw_phymode_configure before ci_usb_phy_init
usb: chipidea: Fix Internal error: : 808 [#1] ARM related to STS flag
usb: chipidea: imx: set CI_HDRC_IMX28_WRITE_FIX for imx28
usb: chipidea: add freescale imx28 special write register method
usb: ehci: add freescale imx28 special write register method
usb: core: check for valid id_table when using the RefId feature
usb: cdc-wdm: resp_count can be 0 even if WDM_READ is set
usb: core: bail out if user gives an unknown RefId when using new_id
usb: core: allow a reference device for new_id
usb: core: add sanity checks when using bInterfaceClass with new_id
USB: image: correct spelling mistake in comment
USB: c67x00: correct spelling mistakes in comments
usb: delete non-required instances of include <linux/init.h>
usb:hub set hub->change_bits when over-current happens
Revert "usb: chipidea: imx: set CI_HDRC_IMX28_WRITE_FIX for imx28"
xhci: Set scatter-gather limit to avoid failed block writes.
xhci: Avoid infinite loop when sg urb requires too many trbs
usb: gadget: remove unused variable in gr_queue_int()
...
Linus Torvalds [Tue, 21 Jan 2014 00:05:23 +0000 (16:05 -0800)]
Merge tag 'tty-3.14-rc1' of git://git./linux/kernel/git/gregkh/tty
Pull tty/serial driver updates from Greg KH:
"Here's the big tty/serial driver pull request for 3.14-rc1
There are a number of n_tty fixes and cleanups, and some serial driver
bugfixes, and we got rid of one obsolete driver, making this series
remove more lines than added, always a nice surprise.
All of these have been in linux-next with no reports of issues"
* tag 'tty-3.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (60 commits)
tty/serial: at91: disable uart timer at start of shutdown
serial: 8250: enable UART_BUG_NOMSR for Tegra
tty/serial: at91: reset rx_ring when port is shutdown
tty/serial: at91: fix race condition in atmel_serial_remove
tty/serial: at91: Handle shutdown more safely
serial: sirf: correct condition for fetching dma buffer into tty
serial: sirf: provide pm entries of uart_ops
serial: sirf: use PM macro initialize PM functions
serial: clps711x: Enable driver compilation with COMPILE_TEST
serial: clps711x: Add support for N_IRDA line discipline
tty: synclink: avoid sleep_on race
tty/amiserial: avoid interruptible_sleep_on
tty: delete non-required instances of include <linux/init.h>
tty: an overflow of multiplication in drivers/tty/cyclades.c
serial: Remove old SC26XX driver
serial: add support for 200 v3 series Titan card
serial: 8250: Fix initialisation of Quatech cards with the AMCC PCI chip
tty: Removing the deprecated function tty_vhangup_locked()
TTY/n_gsm: Removing the wrong tty_unlock/lock() in gsm_dlci_release()
tty/serial: at91: document clock properties
...
Linus Torvalds [Mon, 20 Jan 2014 23:51:35 +0000 (15:51 -0800)]
Merge tag 'staging-3.14-rc1' of git://git./linux/kernel/git/gregkh/staging
Pull staging driver tree changes from Greg KH:
"Here's the big drivers/staging/ update for 3.14-rc1
Lots and lots of cleanups, IIO driver updates are also mixed in here
due to the subsystem still crossing staging and drivers/iio/, and the
dwc2 driver is moved out of staging. There's a new driver (rts5208),
which ends up making us adding more lines than removing, but overall
there was lots of work toward moving code out of here, which was good
All of this has been in linux-next with no reported issues"
* tag 'staging-3.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (1084 commits)
lustre: delete linux/lustre_debug.h
staging: lustre: remove some unused debug macros
usb: dwc2: move device tree bindings doc to correct place
staging: vt6656: sparse fixes: iwctl_giwgenie use memcpy.
staging: vt6656: sparse fixes: iwctl_siwgenie use memcpy.
staging: vt6656: sparse fixes ethtool_ioctl Use struct ifreq *
staging: vt6656: sparse fixes: dpc.c missing dpc.h
staging: lustre: libcfs_debug: small whitespace cleanups
staging: lustre: libcfs_debug.h: remove extra blank lines
staging: lustre: libcfs_debug.h: Align backslashes in macros
staging: lustre: libcfs_debug.h: align define values
staging: tidspbridge: adjust error return code (bugfix)
Staging: rts5139: rts51x_card: fixed style issues
staging: wlags49_h2: Fix "do not use C99 //" in wl_cs.h, wl_enc.h wl_main.h and wl_wext.h
Staging: rtl8188eu: Fixed "foo * bar" related coding style issues
Staging: rtl8188eu: Fixed required spaces after ',' and around '=' and '=='
staging: vt6655: Fix memory leak in wpa_ioctl()
imx-drm: parallel-display: honor 'native-mode' property when selecting video mode from DT
staging: drm/imx: don't drop crtc offsets when doing pageflip
staging: drm/imx: handle framebuffer offsets correctly
...
Linus Torvalds [Mon, 20 Jan 2014 23:49:44 +0000 (15:49 -0800)]
Merge tag 'driver-core-3.14-rc1' of git://git./linux/kernel/git/gregkh/driver-core
Pull driver core / sysfs patches from Greg KH:
"Here's the big driver core and sysfs patch set for 3.14-rc1.
There's a lot of work here moving sysfs logic out into a "kernfs" to
allow other subsystems to also have a virtual filesystem with the same
attributes of sysfs (handle device disconnect, dynamic creation /
removal as needed / unneeded, etc)
This is primarily being done for the cgroups filesystem, but the goal
is to also move debugfs to it when it is ready, solving all of the
known issues in that filesystem as well. The code isn't completed
yet, but all should be stable now (there is a big section that was
reverted due to problems found when testing)
There's also some other smaller fixes, and a driver core addition that
allows for a "collection" of objects, that the DRM people will be
using soon (it's in this tree to make merges after -rc1 easier)
All of this has been in linux-next with no reported issues"
* tag 'driver-core-3.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (113 commits)
kernfs: associate a new kernfs_node with its parent on creation
kernfs: add struct dentry declaration in kernfs.h
kernfs: fix get_active failure handling in kernfs_seq_*()
Revert "kernfs: fix get_active failure handling in kernfs_seq_*()"
Revert "kernfs: replace kernfs_node->u.completion with kernfs_root->deactivate_waitq"
Revert "kernfs: remove KERNFS_ACTIVE_REF and add kernfs_lockdep()"
Revert "kernfs: remove KERNFS_REMOVED"
Revert "kernfs: restructure removal path to fix possible premature return"
Revert "kernfs: invoke kernfs_unmap_bin_file() directly from __kernfs_remove()"
Revert "kernfs: remove kernfs_addrm_cxt"
Revert "kernfs: make kernfs_get_active() block if the node is deactivated but not removed"
Revert "kernfs: implement kernfs_{de|re}activate[_self]()"
Revert "kernfs, sysfs, driver-core: implement kernfs_remove_self() and its wrappers"
Revert "pci: use device_remove_file_self() instead of device_schedule_callback()"
Revert "scsi: use device_remove_file_self() instead of device_schedule_callback()"
Revert "s390: use device_remove_file_self() instead of device_schedule_callback()"
Revert "sysfs, driver-core: remove unused {sysfs|device}_schedule_callback_owner()"
Revert "kernfs: remove unnecessary NULL check in __kernfs_remove()"
kernfs: remove unnecessary NULL check in __kernfs_remove()
drivers/base: provide an infrastructure for componentised subsystems
...
Linus Torvalds [Mon, 20 Jan 2014 23:48:19 +0000 (15:48 -0800)]
Merge tag 'char-misc-3.14-rc1' of git://git./linux/kernel/git/gregkh/char-misc
Pull char/misc driver patches from Greg KH:
"Here's the big char/misc driver patches for 3.14-rc1.
Lots of little things, and a new "big" driver, genwqe. Full details
are in the shortlog"
* tag 'char-misc-3.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (90 commits)
mei: limit the number of consecutive resets
mei: revamp mei reset state machine
drivers/char: don't use module_init in non-modular ttyprintk.c
VMCI: fix error handling path when registering guest driver
extcon: gpio: Add power resume support
Documentation: HOWTO: Updates on subsystem trees, patchwork, -next (vs. -mm) in ko_KR
Documentation: HOWTO: update for 2.6.x -> 3.x versioning in ko_KR
Documentation: HOWTO: update stable address in ko_KR
Documentation: HOWTO: update LXR web link in ko_KR
char: nwbutton: open-code interruptible_sleep_on
mei: fix syntax in comments and debug output
mei: nfc: mei_nfc_free has to be called under lock
mei: use hbm idle state to prevent spurious resets
mei: do not run reset flow from the interrupt thread
misc: genwqe: fix return value check in genwqe_device_create()
GenWQE: Fix warnings for sparc
GenWQE: Fix compile problems for Alpha
Documentation/misc-devices/mei/mei-amt-version.c: remove unneeded call of mei_deinit()
GenWQE: Rework return code for flash-update ioctl
sgi-xp: open-code interruptible_sleep_on_timeout
...
Linus Torvalds [Mon, 20 Jan 2014 23:40:44 +0000 (15:40 -0800)]
Merge tag 'arm64-upstream' of git://git./linux/kernel/git/arm64/linux
Pull ARM64 updates from Catalin Marinas:
- CPU suspend support on top of PSCI (firmware Power State Coordination
Interface)
- jump label support
- CMA can now be enabled on arm64
- HWCAP bits for crypto and CRC32 extensions
- optimised percpu using tpidr_el1 register
- code cleanup
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (42 commits)
arm64: fix typo in entry.S
arm64: kernel: restore HW breakpoint registers in cpu_suspend
jump_label: use defined macros instead of hard-coding for better readability
arm64, jump label: optimize jump label implementation
arm64, jump label: detect %c support for ARM64
arm64: introduce aarch64_insn_gen_{nop|branch_imm}() helper functions
arm64: move encode_insn_immediate() from module.c to insn.c
arm64: introduce interfaces to hotpatch kernel and module code
arm64: introduce basic aarch64 instruction decoding helpers
arm64: dts: Reduce size of virtio block device for foundation model
arm64: Remove unused __data_loc variable
arm64: Enable CMA
arm64: Warn on NULL device structure for dma APIs
arm64: Add hwcaps for crypto and CRC32 extensions.
arm64: drop redundant macros from read_cpuid()
arm64: Remove outdated comment
arm64: cmpxchg: update macros to prevent warnings
arm64: support single-step and breakpoint handler hooks
ARM64: fix framepointer check in unwind_frame
ARM64: check stack pointer in get_wchan
...
Dmitry Eremin-Solenikov [Mon, 20 Jan 2014 23:33:09 +0000 (03:33 +0400)]
MAINTAINERS: Pick up power supply maintainership
Anton stated that he would have to abandon power supply maintainership
due to the lack of time. By agreement with him and David, pick up power
supply tree.
Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Acked-by: Anton Vorontsov <anton@enomsg.org>
Linus Torvalds [Mon, 20 Jan 2014 23:12:49 +0000 (15:12 -0800)]
Merge branch 'x86-x32-for-linus' of git://git./linux/kernel/git/tip/tip
Pull x32 uapi changes from Peter Anvin:
"This is the first few of a set of patches by H.J. Lu to make the
kernel uapi headers usable for x32, as required by some non-glibc
libcs.
These particular patches make the stat and statfs structures usable"
* 'x86-x32-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86, x32: Use __kernel_long_t for __statfs_word
x86, x32: Use __kernel_long_t/__kernel_ulong_t in x86-64 stat.h
Linus Torvalds [Mon, 20 Jan 2014 22:46:32 +0000 (14:46 -0800)]
Merge branch 'x86/mpx' of git://git./linux/kernel/git/tip/tip
Pull x86 cpufeature and mpx updates from Peter Anvin:
"This includes the basic infrastructure for MPX (Memory Protection
Extensions) support, but does not include MPX support itself. It is,
however, a prerequisite for KVM support for MPX, which I believe will
be pushed later this merge window by the KVM team.
This includes moving the functionality in
futex_atomic_cmpxchg_inatomic() into a new function in uaccess.h so it
can be reused - this will be used by the final MPX patches.
The actual MPX functionality (map management and so on) will be pushed
in a future merge window, when ready"
* 'x86/mpx' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/intel/mpx: Remove unused LWP structure
x86, mpx: Add MPX related opcodes to the x86 opcode map
x86: replace futex_atomic_cmpxchg_inatomic() with user_atomic_cmpxchg_inatomic
x86: add user_atomic_cmpxchg_inatomic at uaccess.h
x86, xsave: Support eager-only xsave features, add MPX support
x86, cpufeature: Define the Intel MPX feature flag
Linus Torvalds [Mon, 20 Jan 2014 22:45:50 +0000 (14:45 -0800)]
Merge branch 'x86-kaslr-for-linus' of git://git./linux/kernel/git/tip/tip
Pull x86 kernel address space randomization support from Peter Anvin:
"This enables kernel address space randomization for x86"
* 'x86-kaslr-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86, kaslr: Clarify RANDOMIZE_BASE_MAX_OFFSET
x86, kaslr: Remove unused including <linux/version.h>
x86, kaslr: Use char array to gain sizeof sanity
x86, kaslr: Add a circular multiply for better bit diffusion
x86, kaslr: Mix entropy sources together as needed
x86/relocs: Add percpu fixup for GNU ld 2.23
x86, boot: Rename get_flags() and check_flags() to *_cpuflags()
x86, kaslr: Raise the maximum virtual address to -1 GiB on x86_64
x86, kaslr: Report kernel offset on panic
x86, kaslr: Select random position from e820 maps
x86, kaslr: Provide randomness functions
x86, kaslr: Return location from decompress_kernel
x86, boot: Move CPU flags out of cpucheck
x86, relocs: Add more per-cpu gold special cases
Linus Torvalds [Mon, 20 Jan 2014 20:11:41 +0000 (12:11 -0800)]
Merge branch 'x86-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull leftover x86 fixes from Ingo Molnar:
"Two leftover fixes that did not make it into v3.13"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86: Add check for number of available vectors before CPU down
x86, cpu, amd: Add workaround for family 16h, erratum 793
Linus Torvalds [Mon, 20 Jan 2014 20:10:27 +0000 (12:10 -0800)]
Merge branch 'x86-ras-for-linus' of git://git./linux/kernel/git/tip/tip
Pull x86 RAS changes from Ingo Molnar:
- SCI reporting for other error types not only correctable ones
- GHES cleanups
- Add the functionality to override error reporting agents as some
machines are sporting a new extended error logging capability which,
if done properly in the BIOS, makes a corresponding EDAC module
redundant
- PCIe AER tracepoint severity levels fix
- Error path correction for the mce device init
- MCE timer fix
- Add more flexibility to the error injection (EINJ) debugfs interface
* 'x86-ras-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86, mce: Fix mce_start_timer semantics
ACPI, APEI, GHES: Cleanup ghes memory error handling
ACPI, APEI: Cleanup alignment-aware accesses
ACPI, APEI, GHES: Do not report only correctable errors with SCI
ACPI, APEI, EINJ: Changes to the ACPI/APEI/EINJ debugfs interface
ACPI, eMCA: Combine eMCA/EDAC event reporting priority
EDAC, sb_edac: Modify H/W event reporting policy
EDAC: Add an edac_report parameter to EDAC
PCI, AER: Fix severity usage in aer trace event
x86, mce: Call put_device on device_register failure
Linus Torvalds [Mon, 20 Jan 2014 20:09:31 +0000 (12:09 -0800)]
Merge branch 'x86-platform-for-linus' of git://git./linux/kernel/git/tip/tip
Pull Intel SoC changes from Ingo Molnar:
"Improved Intel SoC platform support"
* 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86, tsc, apic: Unbreak static (MSR) calibration when CONFIG_X86_LOCAL_APIC=n
x86, tsc: Add static (MSR) TSC calibration on Intel Atom SoCs
arch: x86: New MailBox support driver for Intel SOC's
Linus Torvalds [Mon, 20 Jan 2014 20:08:51 +0000 (12:08 -0800)]
Merge branch 'x86-mm-for-linus' of git://git./linux/kernel/git/tip/tip
Pull x86 mm changes from Ingo Molnar:
"A cleanup, a fix and ASLR support for hugetlb mappings"
* 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mm/numa: Fix 32-bit kernel NUMA boot
x86/mm: Implement ASLR for hugetlb mappings
x86/mm: Unify pte_to_pgoff() and pgoff_to_pte() helpers
Linus Torvalds [Mon, 20 Jan 2014 20:07:54 +0000 (12:07 -0800)]
Merge branch 'x86-microcode-for-linus' of git://git./linux/kernel/git/tip/tip
Pull x86 microcode loader updates from Ingo Molnar:
"There are two main changes in this tree:
- AMD microcode early loading fixes
- some microcode loader source files reorganization"
* 'x86-microcode-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86, microcode: Move to a proper location
x86, microcode, AMD: Fix early ucode loading
x86, microcode: Share native MSR accessing variants
x86, ramdisk: Export relocated ramdisk VA
Linus Torvalds [Mon, 20 Jan 2014 20:06:50 +0000 (12:06 -0800)]
Merge branch 'x86-intel-mid-for-linus' of git://git./linux/kernel/git/tip/tip
Pull Intel MID updates from Ingo Molnar:
"This tree improves Intel MID (Mobile Internet Device) platform
support:
- Merrifield platform support (David Cohen)
- Clovertrail platform support (Kuppuswamy Sathyanarayanan)
- Various cleanups and fixes (David Cohen)"
* 'x86-intel-mid-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86, intel_mid: Replace memcpy with struct assignment
x86, intel-mid: Return proper error code from get_gpio_by_name()
x86, intel-mid: Check get_gpio_by_name() error code on platform code
x86, intel-mid: sfi_handle_*_dev() should check for pdata error code
x86, intel-mid: Remove deprecated X86_MDFLD and X86_WANT_INTEL_MID configs
x86, intel-mid: Add Merrifield platform support
x86, intel-mid: Add Clovertrail platform support
x86, intel-mid: Move Medfield code out of intel-mid.c core file
Linus Torvalds [Mon, 20 Jan 2014 20:05:30 +0000 (12:05 -0800)]
Merge branch 'x86-efi-kexec-for-linus' of git://git./linux/kernel/git/tip/tip
Pull x86 EFI changes from Ingo Molnar:
"This consists of two main parts:
- New static EFI runtime services virtual mapping layout which is
groundwork for kexec support on EFI (Borislav Petkov)
- EFI kexec support itself (Dave Young)"
* 'x86-efi-kexec-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits)
x86/efi: parse_efi_setup() build fix
x86: ksysfs.c build fix
x86/efi: Delete superfluous global variables
x86: Reserve setup_data ranges late after parsing memmap cmdline
x86: Export x86 boot_params to sysfs
x86: Add xloadflags bit for EFI runtime support on kexec
x86/efi: Pass necessary EFI data for kexec via setup_data
efi: Export EFI runtime memory mapping to sysfs
efi: Export more EFI table variables to sysfs
x86/efi: Cleanup efi_enter_virtual_mode() function
x86/efi: Fix off-by-one bug in EFI Boot Services reservation
x86/efi: Add a wrapper function efi_map_region_fixed()
x86/efi: Remove unused variables in __map_region()
x86/efi: Check krealloc return value
x86/efi: Runtime services virtual mapping
x86/mm/cpa: Map in an arbitrary pgd
x86/mm/pageattr: Add last levels of error path
x86/mm/pageattr: Add a PUD error unwinding path
x86/mm/pageattr: Add a PTE pagetable populating function
x86/mm/pageattr: Add a PMD pagetable populating function
...
Linus Torvalds [Mon, 20 Jan 2014 20:04:45 +0000 (12:04 -0800)]
Merge branch 'x86-cpu-for-linus' of git://git./linux/kernel/git/tip/tip
Pull x86 TLB detection update from Ingo Molnar:
"A single change that extends our TLB cache size detection+reporting
code"
* 'x86-cpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86, cpu: Detect more TLB configuration
Linus Torvalds [Mon, 20 Jan 2014 20:03:57 +0000 (12:03 -0800)]
Merge branch 'x86-cleanups-for-linus' of git://git./linux/kernel/git/tip/tip
Pull x86 cleanups from Ingo Molnar:
"Misc cleanups"
* 'x86-cleanups-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86, cpu, amd: Fix a shadowed variable situation
um, x86: Fix vDSO build
x86: Delete non-required instances of include <linux/init.h>
x86, realmode: Pointer walk cleanups, pull out invariant use of __pa()
x86/traps: Clean up error exception handler definitions
Linus Torvalds [Mon, 20 Jan 2014 20:03:21 +0000 (12:03 -0800)]
Merge branch 'x86-build-for-linus' of git://git./linux/kernel/git/tip/tip
Pull x86/build changes from Ingo Molnar:
"Misc smaller improvements"
* 'x86-build-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86, boot: Move intcall() to the .inittext section
x86, boot: Use .code16 instead of .code16gcc
x86, sparse: Do not force removal of __user when calling copy_to/from_user_nocheck()
Linus Torvalds [Mon, 20 Jan 2014 19:51:00 +0000 (11:51 -0800)]
Merge branch 'x86-asm-for-linus' of git://git./linux/kernel/git/tip/tip
Pull x86/asm changes from Ingo Molnar:
"Misc optimizations"
* 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86: Slightly tweak the access_ok() C variant for better code
x86: Replace assembly access_ok() with a C variant
x86-64, copy_user: Use leal to produce 32-bit results
x86-64, copy_user: Remove zero byte check before copy user buffer.
Linus Torvalds [Mon, 20 Jan 2014 19:50:01 +0000 (11:50 -0800)]
Merge branch 'x86-apic-for-linus' of git://git./linux/kernel/git/tip/tip
Pull x86/apic changes from Ingo Molnar:
"Two main changes:
- improve local APIC Error Status Register reporting robustness
- add the 'disable_cpu_apicid=x' boot parameter for kexec booting"
* 'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86, apic: Make disabled_cpu_apicid static read_mostly, fix typos
x86, apic, kexec: Add disable_cpu_apicid kernel parameter
x86/apic: Read Error Status Register correctly
Linus Torvalds [Mon, 20 Jan 2014 19:34:26 +0000 (11:34 -0800)]
Merge branch 'timers-core-for-linus' of git://git./linux/kernel/git/tip/tip
Pull timer changes from Ingo Molnar:
- ARM clocksource/clockevent improvements and fixes
- generic timekeeping updates: TAI fixes/improvements, cleanups
- Posix cpu timer cleanups and improvements
- dynticks updates: full dynticks bugfixes, optimizations and cleanups
* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (46 commits)
clocksource: Timer-sun5i: Switch to sched_clock_register()
timekeeping: Remove comment that's mostly out of date
rtc-cmos: Add an alarm disable quirk
timekeeper: fix comment typo for tk_setup_internals()
timekeeping: Fix missing timekeeping_update in suspend path
timekeeping: Fix CLOCK_TAI timer/nanosleep delays
tick/timekeeping: Call update_wall_time outside the jiffies lock
timekeeping: Avoid possible deadlock from clock_was_set_delayed
timekeeping: Fix potential lost pv notification of time change
timekeeping: Fix lost updates to tai adjustment
clocksource: sh_cmt: Add clk_prepare/unprepare support
clocksource: bcm_kona_timer: Remove unused bcm_timer_ids
clocksource: vt8500: Remove deprecated IRQF_DISABLED
clocksource: tegra: Remove deprecated IRQF_DISABLED
clocksource: misc drivers: Remove deprecated IRQF_DISABLED
clocksource: sh_mtu2: Remove unnecessary platform_set_drvdata()
clocksource: sh_tmu: Remove unnecessary platform_set_drvdata()
clocksource: armada-370-xp: Enable timer divider only when needed
clocksource: clksrc-of: Warn if no clock sources are found
clocksource: orion: Switch to sched_clock_register()
...
Ingo Molnar [Mon, 20 Jan 2014 18:51:05 +0000 (19:51 +0100)]
x86/intel/mpx: Remove unused LWP structure
We don't support LWP yet, don't give the impression that we do:
represent the LWP state as opaque 128 bytes, the way Linux sees it
currently.
Cc: Qiaowei Ren <qiaowei.ren@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/n/tip-ecarmjtfKpanpAapfck6dj6g@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Linus Torvalds [Mon, 20 Jan 2014 18:42:08 +0000 (10:42 -0800)]
Merge branch 'sched-core-for-linus' of git://git./linux/kernel/git/tip/tip
Pull scheduler changes from Ingo Molnar:
- Add the initial implementation of SCHED_DEADLINE support: a real-time
scheduling policy where tasks that meet their deadlines and
periodically execute their instances in less than their runtime quota
see real-time scheduling and won't miss any of their deadlines.
Tasks that go over their quota get delayed (Available to privileged
users for now)
- Clean up and fix preempt_enable_no_resched() abuse all around the
tree
- Do sched_clock() performance optimizations on x86 and elsewhere
- Fix and improve auto-NUMA balancing
- Fix and clean up the idle loop
- Apply various cleanups and fixes
* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (60 commits)
sched: Fix __sched_setscheduler() nice test
sched: Move SCHED_RESET_ON_FORK into attr::sched_flags
sched: Fix up attr::sched_priority warning
sched: Fix up scheduler syscall LTP fails
sched: Preserve the nice level over sched_setscheduler() and sched_setparam() calls
sched/core: Fix htmldocs warnings
sched/deadline: No need to check p if dl_se is valid
sched/deadline: Remove unused variables
sched/deadline: Fix sparse static warnings
m68k: Fix build warning in mac_via.h
sched, thermal: Clean up preempt_enable_no_resched() abuse
sched, net: Fixup busy_loop_us_clock()
sched, net: Clean up preempt_enable_no_resched() abuse
sched/preempt: Fix up missed PREEMPT_NEED_RESCHED folding
sched/preempt, locking: Rework local_bh_{dis,en}able()
sched/clock, x86: Avoid a runtime condition in native_sched_clock()
sched/clock: Fix up clear_sched_clock_stable()
sched/clock, x86: Use a static_key for sched_clock_stable
sched/clock: Remove local_irq_disable() from the clocks
sched/clock, x86: Rewrite cyc2ns() to avoid the need to disable IRQs
...
Linus Torvalds [Mon, 20 Jan 2014 18:28:30 +0000 (10:28 -0800)]
Merge branch 'perf-core-for-linus' of git://git./linux/kernel/git/tip/tip
Pull perf updates from Ingo Molnar:
"Kernel side changes:
- Add Intel RAPL energy counter support (Stephane Eranian)
- Clean up uprobes (Oleg Nesterov)
- Optimize ring-buffer writes (Peter Zijlstra)
Tooling side changes, user visible:
- 'perf diff':
- Add column colouring improvements (Ramkumar Ramachandra)
- 'perf kvm':
- Add guest related improvements, including allowing to specify a
directory with guest specific /proc information (Dongsheng Yang)
- Add shell completion support (Ramkumar Ramachandra)
- Add '-v' option (Dongsheng Yang)
- Support --guestmount (Dongsheng Yang)
- 'perf probe':
- Support showing source code, asking for variables to be collected
at probe time and other 'perf probe' operations that use DWARF
information.
This supports only binaries with debugging information at this
time, detached debuginfo (aka debuginfo packages) support should
come in later patches (Masami Hiramatsu)
- 'perf record':
- Rename --no-delay option to --no-buffering, better reflecting its
purpose and freeing up '--delay' to take the place of
'--initial-delay', so that 'record' and 'stat' are consistent
(Arnaldo Carvalho de Melo)
- Default the -t/--thread option to no inheritance (Adrian Hunter)
- Make per-cpu mmaps the default (Adrian Hunter)
- 'perf report':
- Improve callchain processing performance (Frederic Weisbecker)
- Retain bfd reference to lookup source line numbers, greatly
optimizing, among other use cases, 'perf report -s srcline'
(Adrian Hunter)
- Improve callchain processing performance even more (Namhyung Kim)
- Add a perf.data file header window in the 'perf report' TUI,
associated with the 'i' hotkey, providing a counterpart to the
--header option in the stdio UI (Namhyung Kim)
- 'perf script':
- Add an option in 'perf script' to print the source line number
(Adrian Hunter)
- Add --header/--header-only options to 'script' and 'report', the
default is not tho show the header info, but as this has been the
default for some time, leave a single line explaining how to
obtain that information (Jiri Olsa)
- Add options to show comm, fork, exit and mmap PERF_RECORD_ events
(Namhyung Kim)
- Print callchains and symbols if they exist (David Ahern)
- 'perf timechart'
- Add backtrace support to CPU info
- Print pid along the name
- Add support for CPU topology
- Add new option --highlight'ing threads, be it by name or, if a
numeric value is provided, that run more than given duration
(Stanislav Fomichev)
- 'perf top':
- Make 'perf top -g' refer to callchains, for consistency with
other tools (David Ahern)
- 'perf trace':
- Handle old kernels where the "raw_syscalls" tracepoints were
called plain "syscalls" (David Ahern)
- Remove thread summary coloring, by Pekka Enberg.
- Honour -m option in 'trace', the tool was offering the option to
set the mmap size, but wasn't using it when doing the actual mmap
on the events file descriptors (Jiri Olsa)
- generic:
- Backport libtraceevent plugin support (trace-cmd repository, with
plugins for jbd2, hrtimer, kmem, kvm, mac80211, sched_switch,
function, xen, scsi, cfg80211 (Jiri Olsa)
- Print session information only if --stdio is given (Namhyung Kim)
Tooling side changes, developer visible (plumbing):
- Improve 'perf probe' exit path, release resources (Masami
Hiramatsu)
- Improve libtraceevent plugins exit path, allowing the registering
of an unregister handler to be called at exit time (Namhyung Kim)
- Add an alias to the build test makefile (make -C tools/perf
build-test) (Namhyung Kim)
- Get rid of die() and friends (good riddance!) in libtraceevent
(Namhyung Kim)
- Fix cross build problems related to pkgconfig and CROSS_COMPILE not
being propagated to the feature tests, leading to features being
tested in the host and then being enabled on the target (Mark
Rutland)
- Improve forked workload error reporting by sending the errno in the
signal data queueing integer field, using sigqueue and by doing the
signal setup in the evlist methods, removing open coded equivalents
in various tools (Arnaldo Carvalho de Melo)
- Do more auto exit cleanup chores in the 'evlist' destructor, so
that the tools don't have to all do that sequence (Arnaldo Carvalho
de Melo)
- Pack 'struct perf_session_env' and 'struct trace' (Arnaldo Carvalho
de Melo)
- Add test for building detached source tarballs (Arnaldo Carvalho de
Melo)
- Move some header files (tools/perf/ to tools/include/ to make them
available to other tools/ dwelling codebases (Namhyung Kim)
- Move logic to warn about kptr_restrict'ed kernels to separate
function in 'report' (Arnaldo Carvalho de Melo)
- Move hist browser selection code to separate function (Arnaldo
Carvalho de Melo)
- Move histogram entries collapsing to separate function (Arnaldo
Carvalho de Melo)
- Introduce evlist__for_each() & friends (Arnaldo Carvalho de Melo)
- Automate setup of FEATURE_CHECK_(C|LD)FLAGS-all variables (Jiri
Olsa)
- Move arch setup into seprate Makefile (Jiri Olsa)
- Make libtraceevent install target quieter (Jiri Olsa)
- Make tests/make output more compact (Jiri Olsa)
- Ignore generated files in feature-checks (Chunwei Chen)
- Introduce pevent_filter_strerror() in libtraceevent, similar in
purpose to libc's strerror() function (Namhyung Kim)
- Use perf_data_file methods to write output file in 'record' and
'inject' (Jiri Olsa)
- Use pr_*() functions where applicable in 'report' (Namhyumg Kim)
- Add 'machine' 'addr_location' struct to have full picture (machine,
thread, map, symbol, addr) for a (partially) resolved address,
reducing function signatures (Arnaldo Carvalho de Melo)
- Reduce code duplication in the histogram entry creation/insertion
(Arnaldo Carvalho de Melo)
- Auto allocate annotation histogram data structures (Arnaldo
Carvalho de Melo)
- No need to test against NULL before calling free, also set freed
memory in struct pointers to NULL, to help fixing use after free
bugs (Arnaldo Carvalho de Melo)
- Rename some struct DSO binary_type related members and methods, to
clarify its purpose and need for differentiation (symtab_type, ie
one is about the files .text, CFI, etc, i.e. its binary contents,
and the other is about where the symbol table came from (Arnaldo
Carvalho de Melo)
- Convert to new topic libraries, starting with an API one (sysfs,
debugfs, etc), renaming liblk in the process (Borislav Petkov)
- Get rid of some more panic() like error handling in libtraceevent.
(Namhyung Kim)
- Get rid of panic() like calls in libtraceevent (Namyung Kim)
- Start carving out symbol parsing routines (perf, just moving
routines to topic files in tools/lib/symbol/, tools that want to
use it need to integrate it directly, ie no
tools/lib/symbol/Makefile is provided (Arnaldo Carvalho de Melo)
- Assorted refactoring patches, moving code around and adding utility
evlist methods that will be used in the IPT patchset (Adrian
Hunter)
- Assorted mmap_pages handling fixes (Adrian Hunter)
- Several man pages typo fixes (Dongsheng Yang)
- Get rid of several die() calls in libtraceevent (Namhyung Kim)
- Use basename() in a more robust way, to avoid problems related to
different system library implementations for that function
(Stephane Eranian)
- Remove open coded management of short_name_allocated member (Adrian
Hunter)
- Several cleanups in the "dso" methods, constifying some parameters
and renaming some fields to clarify its purpose (Arnaldo Carvalho
de Melo)
- Add per-feature check flags, fixing libunwind related build
problems on some architectures (Jean Pihet)
- Do not disable source line lookup just because of one failure.
(Adrian Hunter)
- Several 'perf kvm' man page corrections (Dongsheng Yang)
- Correct the message in feature-libnuma checking, swowing the right
devel package names for various distros (Dongsheng Yang)
- Polish 'readn()' function and introduce its counterpart,
'writen()' (Jiri Olsa)
- Start moving timechart state from global variables to a 'perf_tool'
derived 'timechart' struct (Arnaldo Carvalho de Melo)
... and lots of fixes and improvements I forgot to list"
* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (282 commits)
perf tools: Remove unnecessary callchain cursor state restore on unmatch
perf callchain: Spare double comparison of callchain first entry
perf tools: Do proper comm override error handling
perf symbols: Export elf_section_by_name and reuse
perf probe: Release all dynamically allocated parameters
perf probe: Release allocated probe_trace_event if failed
perf tools: Add 'build-test' make target
tools lib traceevent: Unregister handler when xen plugin is unloaded
tools lib traceevent: Unregister handler when scsi plugin is unloaded
tools lib traceevent: Unregister handler when jbd2 plugin is is unloaded
tools lib traceevent: Unregister handler when cfg80211 plugin is unloaded
tools lib traceevent: Unregister handler when mac80211 plugin is unloaded
tools lib traceevent: Unregister handler when sched_switch plugin is unloaded
tools lib traceevent: Unregister handler when kvm plugin is unloaded
tools lib traceevent: Unregister handler when kmem plugin is unloaded
tools lib traceevent: Unregister handler when hrtimer plugin is unloaded
tools lib traceevent: Unregister handler when function plugin is unloaded
tools lib traceevent: Add pevent_unregister_print_function()
tools lib traceevent: Add pevent_unregister_event_handler()
tools lib traceevent: fix pointer-integer size mismatch
...
Linus Torvalds [Mon, 20 Jan 2014 18:27:52 +0000 (10:27 -0800)]
Merge branch 'irq-core-for-linus' of git://git./linux/kernel/git/tip/tip
Pull IRQ changes from Ingo Molnar:
"The only change in this cycle is a CPU hotplug related spurious
warning fix"
* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/irq: Fix kbuild warning in smp_irq_move_cleanup_interrupt()
x86/irq: Fix do_IRQ() interrupt warning for cpu hotplug retriggered irqs
Linus Torvalds [Mon, 20 Jan 2014 18:26:31 +0000 (10:26 -0800)]
Merge branch 'core-stackprotector-for-linus' of git://git./linux/kernel/git/tip/tip
Pull strong stackprotector support from Ingo Molnar:
"This tree adds a CONFIG_CC_STACKPROTECTOR_STRONG=y, a new, stronger
stack canary checking method supported by the newest GCC versions (4.9
and later).
Here's the 'intensity comparison' between the various protection
modes:
- defconfig
11430641 kernel text size
36110 function bodies
- defconfig + CONFIG_CC_STACKPROTECTOR_REGULAR
11468490 kernel text size (+0.33%)
1015 of 36110 functions are stack-protected (2.81%)
- defconfig + CONFIG_CC_STACKPROTECTOR_STRONG via this patch
11692790 kernel text size (+2.24%)
7401 of 36110 functions are stack-protected (20.5%)
the strong model comes with non-trivial costs, which is why we
preserved the 'regular' and 'none' models as well"
* 'core-stackprotector-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
stackprotector: Introduce CONFIG_CC_STACKPROTECTOR_STRONG
stackprotector: Unify the HAVE_CC_STACKPROTECTOR logic between architectures
Linus Torvalds [Mon, 20 Jan 2014 18:25:12 +0000 (10:25 -0800)]
Merge branch 'core-rcu-for-linus' of git://git./linux/kernel/git/tip/tip
Pull RCU updates from Ingo Molnar:
- add RCU torture scripts/tooling
- static analysis improvements
- update RCU documentation
- miscellaneous fixes
* 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (52 commits)
rcu: Remove "extern" from function declarations in kernel/rcu/rcu.h
rcu: Remove "extern" from function declarations in include/linux/*rcu*.h
rcu/torture: Dynamically allocate SRCU output buffer to avoid overflow
rcu: Don't activate RCU core on NO_HZ_FULL CPUs
rcu: Warn on allegedly impossible rcu_read_unlock_special() from irq
rcu: Add an RCU_INITIALIZER for global RCU-protected pointers
rcu: Make rcu_assign_pointer's assignment volatile and type-safe
bonding: Use RCU_INIT_POINTER() for better overhead and for sparse
rcu: Add comment on evaluate-once properties of rcu_assign_pointer().
rcu: Provide better diagnostics for blocking in RCU callback functions
rcu: Improve SRCU's grace-period comments
rcu: Fix CONFIG_RCU_FANOUT_EXACT for odd fanout/leaf values
rcu: Fix coccinelle warnings
rcutorture: Stop tracking FSF's postal address
rcutorture: Move checkarg to functions.sh
rcutorture: Flag errors and warnings with color coding
rcutorture: Record results from repeated runs of the same test scenario
rcutorture: Test summary at end of run with less chattiness
rcutorture: Update comment in kvm.sh listing typical RCU trace events
rcutorture: Add tracing-enabled version of TREE08
...
Linus Torvalds [Mon, 20 Jan 2014 18:23:08 +0000 (10:23 -0800)]
Merge branch 'core-locking-for-linus' of git://git./linux/kernel/git/tip/tip
Pull core locking changes from Ingo Molnar:
- futex performance increases: larger hashes, smarter wakeups
- mutex debugging improvements
- lots of SMP ordering documentation updates
- introduce the smp_load_acquire(), smp_store_release() primitives.
(There are WIP patches that make use of them - not yet merged)
- lockdep micro-optimizations
- lockdep improvement: better cover IRQ contexts
- liblockdep at last. We'll continue to monitor how useful this is
* 'core-locking-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (34 commits)
futexes: Fix futex_hashsize initialization
arch: Re-sort some Kbuild files to hopefully help avoid some conflicts
futexes: Avoid taking the hb->lock if there's nothing to wake up
futexes: Document multiprocessor ordering guarantees
futexes: Increase hash table size for better performance
futexes: Clean up various details
arch: Introduce smp_load_acquire(), smp_store_release()
arch: Clean up asm/barrier.h implementations using asm-generic/barrier.h
arch: Move smp_mb__{before,after}_atomic_{inc,dec}.h into asm/atomic.h
locking/doc: Rename LOCK/UNLOCK to ACQUIRE/RELEASE
mutexes: Give more informative mutex warning in the !lock->owner case
powerpc: Full barrier for smp_mb__after_unlock_lock()
rcu: Apply smp_mb__after_unlock_lock() to preserve grace periods
Documentation/memory-barriers.txt: Downgrade UNLOCK+BLOCK
locking: Add an smp_mb__after_unlock_lock() for UNLOCK+BLOCK barrier
Documentation/memory-barriers.txt: Document ACCESS_ONCE()
Documentation/memory-barriers.txt: Prohibit speculative writes
Documentation/memory-barriers.txt: Add long atomic examples to memory-barriers.txt
Documentation/memory-barriers.txt: Add needed ACCESS_ONCE() calls to memory-barriers.txt
Revert "smp/cpumask: Make CONFIG_CPUMASK_OFFSTACK=y usable without debug dependency"
...
Linus Torvalds [Mon, 20 Jan 2014 18:22:12 +0000 (10:22 -0800)]
Merge branch 'core-debug-for-linus' of git://git./linux/kernel/git/tip/tip
Pull core debug changes from Ingo Molnar:
"Currently there are two methods to set the panic_timeout: via
'panic=X' boot commandline option, or via /proc/sys/kernel/panic.
This tree adds a third panic_timeout configuration method:
configuration via Kconfig, via CONFIG_PANIC_TIMEOUT=X - useful to
distros that generally want their kernel defaults to come with the
.config.
CONFIG_PANIC_TIMEOUT defaults to 0, which was the previous default
value of panic_timeout.
Doing that unearthed a few arch trickeries regarding arch-special
panic_timeout values and related complications - hopefully all
resolved to the satisfaction of everyone"
* 'core-debug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
powerpc: Clean up panic_timeout usage
MIPS: Remove panic_timeout settings
panic: Make panic_timeout configurable
Linus Torvalds [Mon, 20 Jan 2014 17:39:18 +0000 (09:39 -0800)]
Merge tag 'ktest-v3.14' of git://git./linux/kernel/git/rostedt/linux-ktest
Pull ktest updates from Steven Rostedt:
"Here's some basic updates to ktest.pl. They include:
- add config to modify the signal to terminate console
- update to documentation (missing some config options)
- add KERNEL_VERSION variable to use for other configs
- add '=~' to let configs eval other configs
- add BISECT_TRIES to run multiple tests per git bisect good"
* tag 'ktest-v3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest:
ktest: Add BISECT_TRIES to bisect test
ktest: Add eval '=~' command to modify variables in config file
ktest: Add special variable ${KERNEL_VERSION}
ktest: Add documentation of CLOSE_CONSOLE_SIGNAL
ktest: Make the signal to terminate the console configurable
Linus Torvalds [Mon, 20 Jan 2014 17:37:38 +0000 (09:37 -0800)]
Merge tag 'localmodconfig-v3.14' of git://git./linux/kernel/git/rostedt/linux-kconfig
Pull localmodconfig update from Steven Rostedt:
"While debugging the problem with localmodconfig and the ALSA codec
modules all being set, I discovered a small bug in the dependency
logic.
If a config has a dependency based on its setting value,
localmodcondig misses it.
For example:
config FOO
default y if BAR || ZOO
If FOO is needed for a module and is set to '=m', and so are BAR or
ZOO, localmodconfig will not see that BAR or ZOO are also needed for
the foo module, and will incorrectly disable them"
* tag 'localmodconfig-v3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-kconfig:
localmodconfig: Add config depends by default settings
projects / GitHub / exynos8895 / android_kernel_samsung_universal8895.git / log