ravb: do not write 1 to reserved bits

[ Upstream commit 2fe397a3959de8a472f165e6d152f64cb77fa2cc ]

EtherAVB hardware requires 0 to be written to status register bits in
order to clear them, however, care must be taken not to:

1. Clear other bits, by writing zero to them
2. Write one to reserved bits

This patch corrects the ravb driver with respect to the second point above.
This is done by defining reserved bit masks for the affected registers and,
after auditing the code, ensure all sites that may write a one to a
reserved bit use are suitably masked.

Signed-off-by: Kazuya Mizuguchi <kazuya.mizuguchi.ks@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: emac: fix fixed-link setup for the RTL8363SB switch

[ Upstream commit 08e39982ef64f800fd1f9b9b92968d14d5fafa82 ]

On the Netgear WNDAP620, the emac ethernet isn't receiving nor
xmitting any frames from/to the RTL8363SB (identifies itself
as a RTL8367RB).

This is caused by the emac hardware not knowing the forced link
parameters for speed, duplex, pause, etc.

This begs the question, how this was working on the original
driver code, when it was necessary to set the phy_address and
phy_map to 0xffffffff. But I guess without access to the old
PPC405/440/460 hardware, it's not possible to know.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Input: atakbd - fix Atari CapsLock behaviour

[ Upstream commit 52d2c7bf7c90217fbe875d2d76f310979c48eb83 ]

The CapsLock key on Atari keyboards is not a toggle, it does send the
normal make and break scancodes.

Drop the CapsLock toggle handling code, which did cause the CapsLock
key to merely act as a Shift key.

Tested-by: Michael Schmitz <schmitzmic@gmail.com>
Signed-off-by: Michael Schmitz <schmitzmic@gmail.com>
Signed-off-by: Andreas Schwab <schwab@linux-m68k.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Input: atakbd - fix Atari keymap

[ Upstream commit 9e62df51be993035c577371ffee5477697a56aad ]

Fix errors in Atari keymap (mostly in keypad, help and undo keys).

Patch provided on debian-68k ML by Andreas Schwab <schwab@linux-m68k.org>,
keymap array size and unhandled scancode limit adjusted to 0x73 by me.

Tested-by: Michael Schmitz <schmitzmic@gmail.com>
Signed-off-by: Michael Schmitz <schmitzmic@gmail.com>
Signed-off-by: Andreas Schwab <schwab@linux-m68k.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

intel_th: pci: Add Ice Lake PCH support

[ Upstream commit 59d08d00d43c644ee2011d7ff1807bdd69f31fe0 ]

This adds Intel(R) Trace Hub PCI ID for Ice Lake PCH.

Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: ibmvscsis: Ensure partition name is properly NUL terminated

[ Upstream commit adad633af7b970bfa5dd1b624a4afc83cac9b235 ]

While reviewing another part of the code, Kees noticed that the strncpy of the
partition name might not always be NUL terminated. Switch to using strscpy
which does this safely.

Reported-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Laura Abbott <labbott@redhat.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: ibmvscsis: Fix a stringop-overflow warning

[ Upstream commit d792d4c4fc866ae224b0b0ca2aabd87d23b4d6cc ]

There's currently a warning about string overflow with strncat:

drivers/scsi/ibmvscsi_tgt/ibmvscsi_tgt.c: In function 'ibmvscsis_probe':
drivers/scsi/ibmvscsi_tgt/ibmvscsi_tgt.c:3479:2: error: 'strncat' specified
bound 64 equals destination size [-Werror=stringop-overflow=]
  strncat(vscsi->eye, vdev->name, MAX_EYE);
  ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Switch to a single snprintf instead of a strcpy + strcat to handle this
cleanly.

Signed-off-by: Laura Abbott <labbott@redhat.com>
Suggested-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

clocksource/drivers/ti-32k: Add CLOCK_SOURCE_SUSPEND_NONSTOP flag for non-am43 SoCs

[ Upstream commit 3b7d96a0dbb6b630878597a1838fc39f808b761b ]

The 32k clocksource is NONSTOP for non-am43 SoCs. Hence
add the flag for all the other SoCs.

Reported-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Keerthy <j-keerthy@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

batman-adv: fix hardif_neigh refcount on queue_work() failure

[ Upstream commit 4c4af6900844ab04c9434c972021d7b48610e06a ]

The hardif_neigh refcounter is to be decreased by the queued work and
currently is never decreased if the queue_work() call fails.
Fix by checking the queue_work() return value and decrease refcount
if necessary.

Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

batman-adv: fix backbone_gw refcount on queue_work() failure

[ Upstream commit 5af96b9c59c72fb2af2d19c5cc2f3cdcee391dff ]

The backbone_gw refcounter is to be decreased by the queued work and
currently is never decreased if the queue_work() call fails.
Fix by checking the queue_work() return value and decrease refcount
if necessary.

Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

batman-adv: Prevent duplicated tvlv handler

[ Upstream commit ae3cdc97dc10c7a3b31f297dab429bfb774c9ccb ]

The function batadv_tvlv_handler_register is responsible for adding new
tvlv_handler to the handler_list. It first checks whether the entry
already is in the list or not. If it is, then the creation of a new entry
is aborted.

But the lock for the list is only held when the list is really modified.
This could lead to duplicated entries because another context could create
an entry with the same key between the check and the list manipulation.

The check and the manipulation of the list must therefore be in the same
locked code section.

Fixes: ef26157747d4 ("batman-adv: tvlv - basic infrastructure")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

batman-adv: Prevent duplicated global TT entry

[ Upstream commit e7136e48ffdfb9f37b0820f619380485eb407361 ]

The function batadv_tt_global_orig_entry_add is responsible for adding new
tt_orig_list_entry to the orig_list. It first checks whether the entry
already is in the list or not. If it is, then the creation of a new entry
is aborted.

But the lock for the list is only held when the list is really modified.
This could lead to duplicated entries because another context could create
an entry with the same key between the check and the list manipulation.

The check and the manipulation of the list must therefore be in the same
locked code section.

Fixes: d657e621a0f5 ("batman-adv: add reference counting for type batadv_tt_orig_list_entry")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

batman-adv: Prevent duplicated softif_vlan entry

[ Upstream commit 94cb82f594ed86be303398d6dfc7640a6f1d45d4 ]

The function batadv_softif_vlan_get is responsible for adding new
softif_vlan to the softif_vlan_list. It first checks whether the entry
already is in the list or not. If it is, then the creation of a new entry
is aborted.

But the lock for the list is only held when the list is really modified.
This could lead to duplicated entries because another context could create
an entry with the same key between the check and the list manipulation.

The check and the manipulation of the list must therefore be in the same
locked code section.

Fixes: 5d2c05b21337 ("batman-adv: add per VLAN interface attribute framework")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

batman-adv: Prevent duplicated nc_node entry

[ Upstream commit fa122fec8640eb7186ce5a41b83a4c1744ceef8f ]

The function batadv_nc_get_nc_node is responsible for adding new nc_nodes
to the in_coding_list and out_coding_list. It first checks whether the
entry already is in the list or not. If it is, then the creation of a new
entry is aborted.

But the lock for the list is only held when the list is really modified.
This could lead to duplicated entries because another context could create
an entry with the same key between the check and the list manipulation.

The check and the manipulation of the list must therefore be in the same
locked code section.

Fixes: d56b1705e28c ("batman-adv: network coding - detect coding nodes and remove these after timeout")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Acked-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

batman-adv: Prevent duplicated gateway_node entry

[ Upstream commit dff9bc42ab0b2d38c5e90ddd79b238fed5b4c7ad ]

The function batadv_gw_node_add is responsible for adding new gw_node to
the gateway_list. It is expecting that the caller already checked that
there is not already an entry with the same key or not.

But the lock for the list is only held when the list is really modified.
This could lead to duplicated entries because another context could create
an entry with the same key between the check and the list manipulation.

The check and the manipulation of the list must therefore be in the same
locked code section.

Fixes: c6c8fea29769 ("net: Add batman-adv meshing protocol")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Acked-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

batman-adv: Fix segfault when writing to sysfs elp_interval

[ Upstream commit a25bab9d723a08bd0bdafb1529faf9094c690b70 ]

The per hardif sysfs file "batman_adv/elp_interval" is using the generic
functions to store/show uint values. The helper __batadv_store_uint_attr
requires the softif net_device as parameter to print the resulting change
as info text when the users writes to this file. It uses the helper
function batadv_info to add it at the same time to the kernel ring buffer
and to the batman-adv debug log (when CONFIG_BATMAN_ADV_DEBUG is enabled).

The function batadv_info requires as first parameter the batman-adv softif
net_device. This parameter is then used to find the private buffer which
contains the debug log for this batman-adv interface. But
batadv_store_throughput_override used as first argument the slave
net_device. This slave device doesn't have the batadv_priv private data
which is access by batadv_info.

Writing to this file with CONFIG_BATMAN_ADV_DEBUG enabled can either lead
to a segfault or to memory corruption.

Fixes: 0744ff8fa8fa ("batman-adv: Add hard_iface specific sysfs wrapper macros for UINT")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Acked-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

batman-adv: Fix segfault when writing to throughput_override

[ Upstream commit b9fd14c20871e6189f635e49b32d7789e430b3c8 ]

The per hardif sysfs file "batman_adv/throughput_override" prints the
resulting change as info text when the users writes to this file. It uses
the helper function batadv_info to add it at the same time to the kernel
ring buffer and to the batman-adv debug log (when CONFIG_BATMAN_ADV_DEBUG
is enabled).

The function batadv_info requires as first parameter the batman-adv softif
net_device. This parameter is then used to find the private buffer which
contains the debug log for this batman-adv interface. But
batadv_store_throughput_override used as first argument the slave
net_device. This slave device doesn't have the batadv_priv private data
which is access by batadv_info.

Writing to this file with CONFIG_BATMAN_ADV_DEBUG enabled can either lead
to a segfault or to memory corruption.

Fixes: 0b5ecc6811bd ("batman-adv: add throughput override attribute to hard_ifaces")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Acked-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

batman-adv: Avoid probe ELP information leak

[ Upstream commit 88d0895d0ea9d4431507d576c963f2ff9918144d ]

The probe ELPs for WiFi interfaces are expanded to contain at least
BATADV_ELP_MIN_PROBE_SIZE bytes. This is usually a lot more than the
number of bytes which the template ELP packet requires.

These extra padding bytes were not initialized and thus could contain data
which were previously stored at the same location. It is therefore required
to set it to some predefined or random values to avoid leaking private
information from the system transmitting these kind of packets.

Fixes: e4623c913508 ("batman-adv: Avoid probe ELP information leak")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Acked-by: Antonio Quartulli <a@unstable.cc>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: af9035: prevent buffer overflow on write

[ Upstream commit 312f73b648626a0526a3aceebb0a3192aaba05ce ]

When less than 3 bytes are written to the device, memcpy is called with
negative array size which leads to buffer overflow and kernel panic. This
patch adds a condition and returns -EOPNOTSUPP instead.
Fixes bugzilla issue 64871

[mchehab+samsung@kernel.org: fix a merge conflict and changed the
 condition to match the patch's comment, e. g. len == 3 could
 also be valid]
Signed-off-by: Jozef Balga <jozef.balga@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 4.14.77

perf tools: Fix snprint warnings for gcc 8

commit 77f18153c080855e1c3fb520ca31a4e61530121d upstream.

With gcc 8 we get new set of snprintf() warnings that breaks the
compilation, one example:

  tests/mem.c: In function ‘check’:
  tests/mem.c:19:48: error: ‘%s’ directive output may be truncated writing \
        up to 99 bytes into a region of size 89 [-Werror=format-truncation=]
    snprintf(failure, sizeof failure, "unexpected %s", out);

The gcc docs says:

 To avoid the warning either use a bigger buffer or handle the
 function's return value which indicates whether or not its output
 has been truncated.

Given that all these warnings are harmless, because the code either
properly fails due to uncomplete file path or we don't care for
truncated output at all, I'm changing all those snprintf() calls to
scnprintf(), which actually 'checks' for the snprint return value so the
gcc stays silent.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com>
Link: http://lkml.kernel.org/r/20180319082902.4518-1-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Ignat Korchagin <ignat@cloudflare.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: spectre-v1: mitigate user accesses

Commit a3c0f84765bb429ba0fd23de1c57b5e1591c9389 upstream.

Spectre variant 1 attacks are about this sequence of pseudo-code:

index = load(user-manipulated pointer);
access(base + index * stride);

In order for the cache side-channel to work, the access() must me made
to memory which userspace can detect whether cache lines have been
loaded.  On 32-bit ARM, this must be either user accessible memory, or
a kernel mapping of that same user accessible memory.

The problem occurs when the load() speculatively loads privileged data,
and the subsequent access() is made to user accessible memory.

Any load() which makes use of a user-maniplated pointer is a potential
problem if the data it has loaded is used in a subsequent access.  This
also applies for the access() if the data loaded by that access is used
by a subsequent access.

Harden the get_user() accessors against Spectre attacks by forcing out
of bounds addresses to a NULL pointer.  This prevents get_user() being
used as the load() step above.  As a side effect, put_user() will also
be affected even though it isn't implicated.

Also harden copy_from_user() by redoing the bounds check within the
arm_copy_from_user() code, and NULLing the pointer if out of bounds.

Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David A. Long <dave.long@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: spectre-v1: use get_user() for __get_user()

Commit b1cd0a14806321721aae45f5446ed83a3647c914 upstream.

Fixing __get_user() for spectre variant 1 is not sane: we would have to
add address space bounds checking in order to validate that the location
should be accessed, and then zero the address if found to be invalid.

Since __get_user() is supposed to avoid the bounds check, and this is
exactly what get_user() does, there's no point having two different
implementations that are doing the same thing.  So, when the Spectre
workarounds are required, make __get_user() an alias of get_user().

Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David A. Long <dave.long@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: use __inttype() in get_user()

Commit d09fbb327d670737ab40fd8bbb0765ae06b8b739 upstream.

Borrow the x86 implementation of __inttype() to use in get_user() to
select an integer type suitable to temporarily hold the result value.
This is necessary to avoid propagating the volatile nature of the
result argument, which can cause the following warning:

lib/iov_iter.c:413:5: warning: optimization may eliminate reads and/or writes to register variables [-Wvolatile-register-var]

Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David A. Long <dave.long@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: oabi-compat: copy semops using __copy_from_user()

Commit 8c8484a1c18e3231648f5ba7cc5ffb7fd70b3ca4 upstream.

__get_user_error() is used as a fast accessor to make copying structure
members as efficient as possible.  However, with software PAN and the
recent Spectre variant 1, the efficiency is reduced as these are no
longer fast accessors.

In the case of software PAN, it has to switch the domain register around
each access, and with Spectre variant 1, it would have to repeat the
access_ok() check for each access.

Rather than using __get_user_error() to copy each semops element member,
copy each semops element in full using __copy_from_user().

Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David A. Long <dave.long@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: vfp: use __copy_from_user() when restoring VFP state

Commit 42019fc50dfadb219f9e6ddf4c354f3837057d80 upstream.

__get_user_error() is used as a fast accessor to make copying structure
members in the signal handling path as efficient as possible.  However,
with software PAN and the recent Spectre variant 1, the efficiency is
reduced as these are no longer fast accessors.

In the case of software PAN, it has to switch the domain register around
each access, and with Spectre variant 1, it would have to repeat the
access_ok() check for each access.

Use __copy_from_user() rather than __get_user_err() for individual
members when restoring VFP state.

Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David A. Long <dave.long@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: signal: copy registers using __copy_from_user()

Commit c32cd419d6650e42b9cdebb83c672ec945e6bd7e upstream.

__get_user_error() is used as a fast accessor to make copying structure
members in the signal handling path as efficient as possible.  However,
with software PAN and the recent Spectre variant 1, the efficiency is
reduced as these are no longer fast accessors.

In the case of software PAN, it has to switch the domain register around
each access, and with Spectre variant 1, it would have to repeat the
access_ok() check for each access.

It becomes much more efficient to use __copy_from_user() instead, so
let's use this for the ARM integer registers.

Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David A. Long <dave.long@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: spectre-v1: fix syscall entry

Commit 10573ae547c85b2c61417ff1a106cffbfceada35 upstream.

Prevent speculation at the syscall table decoding by clamping the index
used to zero on invalid system call numbers, and using the csdb
speculative barrier.

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Boot-tested-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: David A. Long <dave.long@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: spectre-v1: add array_index_mask_nospec() implementation

Commit 1d4238c56f9816ce0f9c8dbe42d7f2ad81cb6613 upstream.

Add an implementation of the array_index_mask_nospec() function for
mitigating Spectre variant 1 throughout the kernel.

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Boot-tested-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: David A. Long <dave.long@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: spectre-v1: add speculation barrier (csdb) macros

Commit a78d156587931a2c3b354534aa772febf6c9e855 upstream.

Add assembly and C macros for the new CSDB instruction.

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Boot-tested-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: David A. Long <dave.long@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: KVM: report support for SMCCC_ARCH_WORKAROUND_1

Commit add5609877c6785cc002c6ed7e008b1d61064439 upstream.

Report support for SMCCC_ARCH_WORKAROUND_1 to KVM guests for affected
CPUs.

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Boot-tested-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: David A. Long <dave.long@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: KVM: Add SMCCC_ARCH_WORKAROUND_1 fast handling

Commit b800acfc70d9fb81fbd6df70f2cf5e20f70023d0 upstream.

We want SMCCC_ARCH_WORKAROUND_1 to be fast. As fast as possible.
So let's intercept it as early as we can by testing for the
function call number as soon as we've identified a HVC call
coming from the guest.

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Boot-tested-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: David A. Long <dave.long@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: spectre-v2: KVM: invalidate icache on guest exit for Brahma B15

Commit 3c908e16396d130608e831b7fac4b167a2ede6ba upstream.

Include Brahma B15 in the Spectre v2 KVM workarounds.

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Boot-tested-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Tony Lindgren <tony@atomide.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: David A. Long <dave.long@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: KVM: invalidate icache on guest exit for Cortex-A15

Commit 0c47ac8cd157727e7a532d665d6fb1b5fd333977 upstream.

In order to avoid aliasing attacks against the branch predictor
on Cortex-A15, let's invalidate the BTB on guest exit, which can
only be done by invalidating the icache (with ACTLR[0] being set).

We use the same hack as for A12/A17 to perform the vector decoding.

Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Boot-tested-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: David A. Long <dave.long@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: KVM: invalidate BTB on guest exit for Cortex-A12/A17

Commit 3f7e8e2e1ebda787f156ce46e3f0a9ce2833fa4f upstream.

In order to avoid aliasing attacks against the branch predictor,
let's invalidate the BTB on guest exit. This is made complicated
by the fact that we cannot take a branch before invalidating the
BTB.

We only apply this to A12 and A17, which are the only two ARM
cores on which this useful.

Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Boot-tested-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: David A. Long <dave.long@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: spectre-v2: warn about incorrect context switching functions

Commit c44f366ea7c85e1be27d08f2f0880f4120698125 upstream.

Warn at error level if the context switching function is not what we
are expecting.  This can happen with big.Little systems, which we
currently do not support.

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Boot-tested-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Tony Lindgren <tony@atomide.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: David A. Long <dave.long@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: spectre-v2: add firmware based hardening

Commit 10115105cb3aa17b5da1cb726ae8dd5f6854bd93 upstream.

Add firmware based hardening for cores that require more complex
handling in firmware.

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Boot-tested-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: David A. Long <dave.long@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: spectre-v2: harden user aborts in kernel space

Commit f5fe12b1eaee220ce62ff9afb8b90929c396595f upstream.

In order to prevent aliasing attacks on the branch predictor,
invalidate the BTB or instruction cache on CPUs that are known to be
affected when taking an abort on a address that is outside of a user
task limit:

Cortex A8, A9, A12, A17, A73, A75: flush BTB.
Cortex A15, Brahma B15: invalidate icache.

If the IBE bit is not set, then there is little point to enabling the
workaround.

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Boot-tested-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: David A. Long <dave.long@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: spectre-v2: add Cortex A8 and A15 validation of the IBE bit

Commit e388b80288aade31135aca23d32eee93dd106795 upstream.

When the branch predictor hardening is enabled, firmware must have set
the IBE bit in the auxiliary control register.  If this bit has not
been set, the Spectre workarounds will not be functional.

Add validation that this bit is set, and print a warning at alert level
if this is not the case.

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Boot-tested-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: David A. Long <dave.long@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: spectre-v2: harden branch predictor on context switches

Commit 06c23f5ffe7ad45b908d0fff604dae08a7e334b9 upstream.

Required manual merge of arch/arm/mm/proc-v7.S.

Harden the branch predictor against Spectre v2 attacks on context
switches for ARMv7 and later CPUs.  We do this by:

Cortex A9, A12, A17, A73, A75: invalidating the BTB.
Cortex A15, Brahma B15: invalidating the instruction cache.

Cortex A57 and Cortex A72 are not addressed in this patch.

Cortex R7 and Cortex R8 are also not addressed as we do not enforce
memory protection on these cores.

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Boot-tested-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Tony Lindgren <tony@atomide.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: David A. Long <dave.long@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: spectre: add Kconfig symbol for CPUs vulnerable to Spectre

Commit c58d237d0852a57fde9bc2c310972e8f4e3d155d upstream.

Add a Kconfig symbol for CPUs which are vulnerable to the Spectre
attacks.

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Boot-tested-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Tony Lindgren <tony@atomide.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: David A. Long <dave.long@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: bugs: add support for per-processor bug checking

Commit 9d3a04925deeabb97c8e26d940b501a2873e8af3 upstream.

Add support for per-processor bug checking - each processor function
descriptor gains a function pointer for this check, which must not be
an __init function.  If non-NULL, this will be called whenever a CPU
enters the kernel via which ever path (boot CPU, secondary CPU startup,
CPU resuming, etc.)

This allows processor specific bug checks to validate that workaround
bits are properly enabled by firmware via all entry paths to the kernel.

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Boot-tested-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Tony Lindgren <tony@atomide.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: David A. Long <dave.long@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: bugs: hook processor bug checking into SMP and suspend paths

Commit 26602161b5ba795928a5a719fe1d5d9f2ab5c3ef upstream.

Check for CPU bugs when secondary processors are being brought online,
and also when CPUs are resuming from a low power mode.  This gives an
opportunity to check that processor specific bug workarounds are
correctly enabled for all paths that a CPU re-enters the kernel.

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Boot-tested-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Tony Lindgren <tony@atomide.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: David A. Long <dave.long@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: bugs: prepare processor bug infrastructure

Commit a5b9177f69329314721aa7022b7e69dab23fa1f0 upstream.

Prepare the processor bug infrastructure so that it can be expanded to
check for per-processor bugs.

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Boot-tested-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Tony Lindgren <tony@atomide.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: David A. Long <dave.long@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: add more CPU part numbers for Cortex and Brahma B15 CPUs

Commit f5683e76f35b4ec5891031b6a29036efe0a1ff84 upstream.

Add CPU part numbers for Cortex A53, A57, A72, A73, A75 and the
Broadcom Brahma B15 CPU.

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Boot-tested-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Tony Lindgren <tony@atomide.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: David A. Long <dave.long@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm: don't show nr_indirectly_reclaimable in /proc/vmstat

commit 7aaf7727235870f497eb928f728f7773d6df3b40 upstream.

Don't show nr_indirectly_reclaimable in /proc/vmstat, because there is
no need to export this vm counter to userspace, and some changes are
expected in reclaimable object accounting, which can alter this counter.

Link: http://lkml.kernel.org/r/20180425191422.9159-1-guro@fb.com
Signed-off-by: Roman Gushchin <guro@fb.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm: treat indirectly reclaimable memory as free in overcommit logic

commit d79f7aa496fc94d763f67b833a1f36f4c171176f upstream.

Indirectly reclaimable memory can consume a significant part of total
memory and it's actually reclaimable (it will be released under actual
memory pressure).

So, the overcommit logic should treat it as free.

Otherwise, it's possible to cause random system-wide memory allocation
failures by consuming a significant amount of memory by indirectly
reclaimable memory, e.g.  dentry external names.

If overcommit policy GUESS is used, it might be used for denial of
service attack under some conditions.

The following program illustrates the approach.  It causes the kernel to
allocate an unreclaimable kmalloc-256 chunk for each stat() call, so
that at some point the overcommit logic may start blocking large
allocation system-wide.

  int main()
  {
   char buf[256];
   unsigned long i;
   struct stat statbuf;

   buf[0] = '/';
   for (i = 1; i < sizeof(buf); i++)
   buf[i] = '_';

   for (i = 0; 1; i++) {
   sprintf(&buf[248], "%8lu", i);
   stat(buf, &statbuf);
   }

   return 0;
  }

This patch in combination with related indirectly reclaimable memory
patches closes this issue.

Link: http://lkml.kernel.org/r/20180313130041.8078-1-guro@fb.com
Signed-off-by: Roman Gushchin <guro@fb.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dcache: account external names as indirectly reclaimable memory

commit f1782c9bc547754f4bd3043fe8cfda53db85f13f upstream.

I received a report about suspicious growth of unreclaimable slabs on
some machines.  I've found that it happens on machines with low memory
pressure, and these unreclaimable slabs are external names attached to
dentries.

External names are allocated using generic kmalloc() function, so they
are accounted as unreclaimable.  But they are held by dentries, which
are reclaimable, and they will be reclaimed under the memory pressure.

In particular, this breaks MemAvailable calculation, as it doesn't take
unreclaimable slabs into account.  This leads to a silly situation, when
a machine is almost idle, has no memory pressure and therefore has a big
dentry cache.  And the resulting MemAvailable is too low to start a new
workload.

To address the issue, the NR_INDIRECTLY_RECLAIMABLE_BYTES counter is
used to track the amount of memory, consumed by external names.  The
counter is increased in the dentry allocation path, if an external name
structure is allocated; and it's decreased in the dentry freeing path.

To reproduce the problem I've used the following Python script:

  import os

  for iter in range (0, 10000000):
      try:
          name = ("/some_long_name_%d" % iter) + "_" * 220
          os.stat(name)
      except Exception:
          pass

Without this patch:
  $ cat /proc/meminfo | grep MemAvailable
  MemAvailable:    7811688 kB
  $ python indirect.py
  $ cat /proc/meminfo | grep MemAvailable
  MemAvailable:    2753052 kB

With the patch:
  $ cat /proc/meminfo | grep MemAvailable
  MemAvailable:    7809516 kB
  $ python indirect.py
  $ cat /proc/meminfo | grep MemAvailable
  MemAvailable:    7749144 kB

[guro@fb.com: fix indirectly reclaimable memory accounting for CONFIG_SLOB]
Link: http://lkml.kernel.org/r/20180312194140.19517-1-guro@fb.com
[guro@fb.com: fix indirectly reclaimable memory accounting]
Link: http://lkml.kernel.org/r/20180313125701.7955-1-guro@fb.com
Link: http://lkml.kernel.org/r/20180305133743.12746-5-guro@fb.com
Signed-off-by: Roman Gushchin <guro@fb.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm: treat indirectly reclaimable memory as available in MemAvailable

commit 034ebf65c3c21d85b963d39f992258a64a85e3a9 upstream.

Adjust /proc/meminfo MemAvailable calculation by adding the amount of
indirectly reclaimable memory (rounded to the PAGE_SIZE).

Link: http://lkml.kernel.org/r/20180305133743.12746-4-guro@fb.com
Signed-off-by: Roman Gushchin <guro@fb.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm: introduce NR_INDIRECTLY_RECLAIMABLE_BYTES

commit eb59254608bc1d42c4c6afdcdce9c0d3ce02b318 upstream.

Patch series "indirectly reclaimable memory", v2.

This patchset introduces the concept of indirectly reclaimable memory
and applies it to fix the issue of when a big number of dentries with
external names can significantly affect the MemAvailable value.

This patch (of 3):

Introduce a concept of indirectly reclaimable memory and adds the
corresponding memory counter and /proc/vmstat item.

Indirectly reclaimable memory is any sort of memory, used by the kernel
(except of reclaimable slabs), which is actually reclaimable, i.e.  will
be released under memory pressure.

The counter is in bytes, as it's not always possible to count such
objects in pages.  The name contains BYTES by analogy to
NR_KERNEL_STACK_KB.

Link: http://lkml.kernel.org/r/20180305133743.12746-2-guro@fb.com
Signed-off-by: Roman Gushchin <guro@fb.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xhci: Don't print a warning when setting link state for disabled ports

commit 1208d8a84fdcae6b395c57911cdf907450d30e70 upstream.

When disabling a USB3 port the hub driver will set the port link state to
U3 to prevent "ejected" or "safely removed" devices that are still
physically connected from immediately re-enumerating.

If the device was really unplugged, then error messages were printed
as the hub tries to set the U3 link state for a port that is no longer
enabled.

xhci-hcd ee000000.usb: Cannot set link state.
usb usb8-port1: cannot disable (err = -32)

Don't print error message in xhci-hub if hub tries to set port link state
for a disabled port. Return -ENODEV instead which also silences hub driver.

Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Ross Zwisler <zwisler@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

i2c: i2c-scmi: fix for i2c_smbus_write_block_data

commit 08d9db00fe0e300d6df976e6c294f974988226dd upstream.

The i2c-scmi driver crashes when the SMBus Write Block transaction is
executed:

WARNING: CPU: 9 PID: 2194 at mm/page_alloc.c:3931 __alloc_pages_slowpath+0x9db/0xec0
 Call Trace:
  ? get_page_from_freelist+0x49d/0x11f0
  ? alloc_pages_current+0x6a/0xe0
  ? new_slab+0x499/0x690
  __alloc_pages_nodemask+0x265/0x280
  alloc_pages_current+0x6a/0xe0
  kmalloc_order+0x18/0x40
  kmalloc_order_trace+0x24/0xb0
  ? acpi_ut_allocate_object_desc_dbg+0x62/0x10c
  __kmalloc+0x203/0x220
  acpi_os_allocate_zeroed+0x34/0x36
  acpi_ut_copy_eobject_to_iobject+0x266/0x31e
  acpi_evaluate_object+0x166/0x3b2
  acpi_smbus_cmi_access+0x144/0x530 [i2c_scmi]
  i2c_smbus_xfer+0xda/0x370
  i2cdev_ioctl_smbus+0x1bd/0x270
  i2cdev_ioctl+0xaa/0x250
  do_vfs_ioctl+0xa4/0x600
  SyS_ioctl+0x79/0x90
  do_syscall_64+0x73/0x130
  entry_SYSCALL_64_after_hwframe+0x3d/0xa2
ACPI Error: Evaluating _SBW: 4 (20170831/smbus_cmi-185)

This problem occurs because the length of ACPI Buffer object is not
defined/initialized in the code before a corresponding ACPI method is
called. The obvious patch below fixes this issue.

Signed-off-by: Edgar Cherkasov <echerkasov@dev.rtsoft.ru>
Acked-by: Viktor Krasnov <vkrasnov@dev.rtsoft.ru>
Acked-by: Michael Brunner <Michael.Brunner@kontron.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm: Preserve _PAGE_DEVMAP across mprotect() calls

commit 4628a64591e6cee181237060961e98c615c33966 upstream.

Currently _PAGE_DEVMAP bit is not preserved in mprotect(2) calls. As a
result we will see warnings such as:

BUG: Bad page map in process JobWrk0013  pte:800001803875ea25 pmd:7624381067
addr:00007f0930720000 vm_flags:280000f9 anon_vma:          (null) mapping:ffff97f2384056f0 index:0
file:457-000000fe00000030-00000009-000000ca-00000001_2001.fileblock fault:xfs_filemap_fault [xfs] mmap:xfs_file_mmap [xfs] readpage:          (null)
CPU: 3 PID: 15848 Comm: JobWrk0013 Tainted: G        W          4.12.14-2.g7573215-default #1 SLE12-SP4 (unreleased)
Hardware name: Intel Corporation S2600WFD/S2600WFD, BIOS SE5C620.86B.01.00.0833.051120182255 05/11/2018
Call Trace:
 dump_stack+0x5a/0x75
 print_bad_pte+0x217/0x2c0
 ? enqueue_task_fair+0x76/0x9f0
 _vm_normal_page+0xe5/0x100
 zap_pte_range+0x148/0x740
 unmap_page_range+0x39a/0x4b0
 unmap_vmas+0x42/0x90
 unmap_region+0x99/0xf0
 ? vma_gap_callbacks_rotate+0x1a/0x20
 do_munmap+0x255/0x3a0
 vm_munmap+0x54/0x80
 SyS_munmap+0x1d/0x30
 do_syscall_64+0x74/0x150
 entry_SYSCALL_64_after_hwframe+0x3d/0xa2
...

when mprotect(2) gets used on DAX mappings. Also there is a wide variety
of other failures that can result from the missing _PAGE_DEVMAP flag
when the area gets used by get_user_pages() later.

Fix the problem by including _PAGE_DEVMAP in a set of flags that get
preserved by mprotect(2).

Fixes: 69660fd797c3 ("x86, mm: introduce _PAGE_DEVMAP")
Fixes: ebd31197931d ("powerpc/mm: Add devmap support for ppc64")
Cc: <stable@vger.kernel.org>
Signed-off-by: Jan Kara <jack@suse.cz>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm/thp: fix call to mmu_notifier in set_pmd_migration_entry() v2

commit bfba8e5cf28f413aa05571af493871d74438979f upstream.

Inside set_pmd_migration_entry() we are holding page table locks and thus
we can not sleep so we can not call invalidate_range_start/end()

So remove call to mmu_notifier_invalidate_range_start/end() because they
are call inside the function calling set_pmd_migration_entry() (see
try_to_unmap_one()).

Link: http://lkml.kernel.org/r/20181012181056.7864-1-jglisse@redhat.com
Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
Reported-by: Andrea Arcangeli <aarcange@redhat.com>
Reviewed-by: Zi Yan <zi.yan@cs.rutgers.edu>
Acked-by: Michal Hocko <mhocko@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: David Nellans <dnellans@nvidia.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: perf: Reject stand-alone CHAIN events for PMUv3

commit ca2b497253ad01c80061a1f3ee9eb91b5d54a849 upstream.

It doesn't make sense for a perf event to be configured as a CHAIN event
in isolation, so extend the arm_pmu structure with a ->filter_match()
function to allow the backend PMU implementation to reject CHAIN events
early.

Cc: <stable@vger.kernel.org>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

pinctrl: mcp23s08: fix irq and irqchip setup order

commit f259f896f2348f0302f6f88d4382378cf9d23a7e upstream.

Since 'commit 02e389e63e35 ("pinctrl: mcp23s08: fix irq setup order")' the
irq request isn't the last devm_* allocation. Without a deeper look at
the irq and testing this isn't a good solution. Since this driver relies
on the devm mechanism, requesting a interrupt should be the last thing
to avoid memory corruptions during unbinding.

'Commit 02e389e63e35 ("pinctrl: mcp23s08: fix irq setup order")' fixed the
order for the interrupt-controller use case only. The
mcp23s08_irq_setup() must be split into two to fix it for the
interrupt-controller use case and to register the irq at last. So the
irq will be freed first during unbind.

Cc: stable@vger.kernel.org
Cc: Jan Kundrát <jan.kundrat@cesnet.cz>
Cc: Dmitry Mastykin <mastichi@gmail.com>
Cc: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Fixes: 82039d244f87 ("pinctrl: mcp23s08: add pinconf support")
Fixes: 02e389e63e35 ("pinctrl: mcp23s08: fix irq setup order")
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Tested-by: Phil Reid <preid@electromag.com.au>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mmc: block: avoid multiblock reads for the last sector in SPI mode

commit 41591b38f5f8f78344954b68582b5f00e56ffe61 upstream.

On some SD cards over SPI, reading with the multiblock read command the last
sector will leave the card in a bad state.

Remove last sectors from the multiblock reading cmd.

Signed-off-by: Chris Boot <bootc@bootc.net>
Signed-off-by: Clément Péron <peron.clem@gmail.com>
Cc: stable@vger.kernel.org # v4.10+
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cgroup: Fix dom_cgrp propagation when enabling threaded mode

commit 479adb89a97b0a33e5a9d702119872cc82ca21aa upstream.

A cgroup which is already a threaded domain may be converted into a
threaded cgroup if the prerequisite conditions are met.  When this
happens, all threaded descendant should also have their ->dom_cgrp
updated to the new threaded domain cgroup.  Unfortunately, this
propagation was missing leading to the following failure.

  # cd /sys/fs/cgroup/unified
  # cat cgroup.subtree_control    # show that no controllers are enabled

  # mkdir -p mycgrp/a/b/c
  # echo threaded > mycgrp/a/b/cgroup.type

  At this point, the hierarchy looks as follows:

      mycgrp [d]
  a [dt]
      b [t]
  c [inv]

  Now let's make node "a" threaded (and thus "mycgrp" s made "domain threaded"):

  # echo threaded > mycgrp/a/cgroup.type

  By this point, we now have a hierarchy that looks as follows:

      mycgrp [dt]
  a [t]
      b [t]
  c [inv]

  But, when we try to convert the node "c" from "domain invalid" to
  "threaded", we get ENOTSUP on the write():

  # echo threaded > mycgrp/a/b/c/cgroup.type
  sh: echo: write error: Operation not supported

This patch fixes the problem by

* Moving the opencoded ->dom_cgrp save and restoration in
  cgroup_enable_threaded() into cgroup_{save|restore}_control() so
  that mulitple cgroups can be handled.

* Updating all threaded descendants' ->dom_cgrp to point to the new
  dom_cgrp when enabling threaded mode.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-and-tested-by: "Michael Kerrisk (man-pages)" <mtk.manpages@gmail.com>
Reported-by: Amin Jamali <ajamali@pivotal.io>
Reported-by: Joao De Almeida Pereira <jpereira@pivotal.io>
Link: https://lore.kernel.org/r/CAKgNAkhHYCMn74TCNiMJ=ccLd7DcmXSbvw3CbZ1YREeG7iJM5g@mail.gmail.com
Fixes: 454000adaa2a ("cgroup: introduce cgroup->dom_cgrp and threaded css_set handling")
Cc: stable@vger.kernel.org # v4.14+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dm linear: fix linear_end_io conditional definition

commit 118aa47c7072bce05fc39bd40a1c0a90caed72ab upstream.

The dm-linear target is independent of the dm-zoned target. For code
requiring support for zoned block devices, use CONFIG_BLK_DEV_ZONED
instead of CONFIG_DM_ZONED.

While at it, similarly to dm linear, also enable the DM_TARGET_ZONED_HM
feature in dm-flakey only if CONFIG_BLK_DEV_ZONED is defined.

Fixes: beb9caac211c1 ("dm linear: eliminate linear_end_io call if CONFIG_DM_ZONED disabled")
Fixes: 0be12c1c7fce7 ("dm linear: add support for zoned block devices")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dm linear: eliminate linear_end_io call if CONFIG_DM_ZONED disabled

commit beb9caac211c1be1bc118bb62d5cf09c4107e6a5 upstream.

It is best to avoid any extra overhead associated with bio completion.
DM core will indirectly call a DM target's .end_io if it is defined.
In the case of DM linear, there is no need to do so (for every bio that
completes) if CONFIG_DM_ZONED is not enabled.

Avoiding an extra indirect call for every bio completion is very
important for ensuring DM linear doesn't incur more overhead that
further widens the performance gap between dm-linear and raw block
devices.

Fixes: 0be12c1c7fce7 ("dm linear: add support for zoned block devices")
Cc: stable@vger.kernel.org
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dm: fix report zone remapping to account for partition offset

commit 9864cd5dc54cade89fd4b0954c2e522841aa247c upstream.

If dm-linear or dm-flakey are layered on top of a partition of a zoned
block device, remapping of the start sector and write pointer position
of the zones reported by a report zones BIO must be modified to account
for the target table entry mapping (start offset within the device and
entry mapping with the dm device).  If the target's backing device is a
partition of a whole disk, the start sector on the physical device of
the partition must also be accounted for when modifying the zone
information.  However, dm_remap_zone_report() was not considering this
last case, resulting in incorrect zone information remapping with
targets using disk partitions.

Fix this by calculating the target backing device start sector using
the position of the completed report zones BIO and the unchanged
position and size of the original report zone BIO. With this value
calculated, the start sector and write pointer position of the target
zones can be correctly remapped.

Fixes: 10999307c14e ("dm: introduce dm_remap_zone_report()")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dm cache: destroy migration_cache if cache target registration failed

commit c7cd55504a5b0fc826a2cd9540845979d24ae542 upstream.

Commit 7e6358d244e47 ("dm: fix various targets to dm_register_target
after module __init resources created") inadvertently introduced this
bug when it moved dm_register_target() after the call to KMEM_CACHE().

Fixes: 7e6358d244e47 ("dm: fix various targets to dm_register_target after module __init resources created")
Cc: stable@vger.kernel.org
Signed-off-by: Shenghui Wang <shhuiw@foxmail.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

s390/cio: Fix how vfio-ccw checks pinned pages

commit 24abf2901b18bf941b9f21ea2ce5791f61097ae4 upstream.

We have two nested loops to check the entries within the pfn_array_table
arrays.  But we mistakenly use the outer array as an index in our check,
and completely ignore the indexing performed by the inner loop.

Cc: stable@vger.kernel.org
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Message-Id: <20181002010235.42483-1-farman@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf script python: Fix export-to-sqlite.py sample columns

commit d005efe18db0b4a123dd92ea8e77e27aee8f99fd upstream.

With the "branches" export option, not all sample columns are exported.
However the unwanted columns are not at the end of the tuple, as assumed
by the code. Fix by taking the first 15 and last 3 values, instead of
the first 18.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/20180911114504.28516-3-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf script python: Fix export-to-postgresql.py occasional failure

commit 25e11700b54c7b6b5ebfc4361981dae12299557b upstream.

Occasional export failures were found to be caused by truncating 64-bit
pointers to 32-bits. Fix by explicitly setting types for all ctype
arguments and results.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/20180911114504.28516-2-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

percpu: stop leaking bitmap metadata blocks

commit 6685b357363bfe295e3ae73665014db4aed62c58 upstream.

The commit ca460b3c9627 ("percpu: introduce bitmap metadata blocks")
introduced bitmap metadata blocks. These metadata blocks are allocated
whenever a new chunk is created, but they are never freed. Fix it.

Fixes: ca460b3c9627 ("percpu: introduce bitmap metadata blocks")
Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dennis Zhou <dennis@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mach64: detect the dot clock divider correctly on sparc

commit 76ebebd2464c5c8a4453c98b6dbf9c95a599e810 upstream.

On Sun Ultra 5, it happens that the dot clock is not set up properly for
some videomodes. For example, if we set the videomode "r1024x768x60" in
the firmware, Linux would incorrectly set a videomode with refresh rate
180Hz when booting (suprisingly, my LCD monitor can display it, although
display quality is very low).

The reason is this: Older mach64 cards set the divider in the register
VCLK_POST_DIV. The register has four 2-bit fields (the field that is
actually used is specified in the lowest two bits of the register
CLOCK_CNTL). The 2 bits select divider "1, 2, 4, 8". On newer mach64 cards,
there's another bit added - the top four bits of PLL_EXT_CNTL extend the
divider selection, so we have possible dividers "1, 2, 4, 8, 3, 5, 6, 12".
The Linux driver clears the top four bits of PLL_EXT_CNTL and never sets
them, so it can work regardless if the card supports them. However, the
sparc64 firmware may set these extended dividers during boot - and the
mach64 driver detects incorrect dot clock in this case.

This patch makes the driver read the additional divider bit from
PLL_EXT_CNTL and calculate the initial refresh rate properly.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
Acked-by: David S. Miller <davem@davemloft.net>
Reviewed-by: Ville Syrjälä <syrjala@sci.fi>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

MIPS: VDSO: Always map near top of user memory

commit ea7e0480a4b695d0aa6b3fa99bd658a003122113 upstream.

When using the legacy mmap layout, for example triggered using ulimit -s
unlimited, get_unmapped_area() fills memory from bottom to top starting
from a fairly low address near TASK_UNMAPPED_BASE.

This placement is suboptimal if the user application wishes to allocate
large amounts of heap memory using the brk syscall. With the VDSO being
located low in the user's virtual address space, the amount of space
available for access using brk is limited much more than it was prior to
the introduction of the VDSO.

For example:

  # ulimit -s unlimited; cat /proc/self/maps
  00400000-004ec000 r-xp 00000000 08:00 71436      /usr/bin/coreutils
  004fc000-004fd000 rwxp 000ec000 08:00 71436      /usr/bin/coreutils
  004fd000-0050f000 rwxp 00000000 00:00 0
  00cc3000-00ce4000 rwxp 00000000 00:00 0          [heap]
  2ab96000-2ab98000 r--p 00000000 00:00 0          [vvar]
  2ab98000-2ab99000 r-xp 00000000 00:00 0          [vdso]
  2ab99000-2ab9d000 rwxp 00000000 00:00 0
  ...

Resolve this by adjusting STACK_TOP to reserve space for the VDSO &
providing an address hint to get_unmapped_area() causing it to use this
space even when using the legacy mmap layout.

We reserve enough space for the VDSO, plus 1MB or 256MB for 32 bit & 64
bit systems respectively within which we randomize the VDSO base
address. Previously this randomization was taken care of by the mmap
base address randomization performed by arch_mmap_rnd(). The 1MB & 256MB
sizes are somewhat arbitrary but chosen such that we have some
randomization without taking up too much of the user's virtual address
space, which is often in short supply for 32 bit systems.

With this the VDSO is always mapped at a high address, leaving lots of
space for statically linked programs to make use of brk:

  # ulimit -s unlimited; cat /proc/self/maps
  00400000-004ec000 r-xp 00000000 08:00 71436      /usr/bin/coreutils
  004fc000-004fd000 rwxp 000ec000 08:00 71436      /usr/bin/coreutils
  004fd000-0050f000 rwxp 00000000 00:00 0
  00c28000-00c49000 rwxp 00000000 00:00 0          [heap]
  ...
  7f67c000-7f69d000 rwxp 00000000 00:00 0          [stack]
  7f7fc000-7f7fd000 rwxp 00000000 00:00 0
  7fcf1000-7fcf3000 r--p 00000000 00:00 0          [vvar]
  7fcf3000-7fcf4000 r-xp 00000000 00:00 0          [vdso]

Signed-off-by: Paul Burton <paul.burton@mips.com>
Reported-by: Huacai Chen <chenhc@lemote.com>
Fixes: ebb5e78cc634 ("MIPS: Initial implementation of a VDSO")
Cc: Huacai Chen <chenhc@lemote.com>
Cc: linux-mips@linux-mips.org
Cc: stable@vger.kernel.org # v4.4+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm/vmstat.c: fix outdated vmstat_text

commit 28e2c4bb99aa40f9d5f07ac130cbc4da0ea93079 upstream.

7a9cdebdcc17 ("mm: get rid of vmacache_flush_all() entirely") removed the
VMACACHE_FULL_FLUSHES statistics, but didn't remove the corresponding
entry in vmstat_text.  This causes an out-of-bounds access in
vmstat_show().

Luckily this only affects kernels with CONFIG_DEBUG_VM_VMACACHE=y, which
is probably very rare.

Link: http://lkml.kernel.org/r/20181001143138.95119-1-jannh@google.com
Fixes: 7a9cdebdcc17 ("mm: get rid of vmacache_flush_all() entirely")
Signed-off-by: Jann Horn <jannh@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Roman Gushchin <guro@fb.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Christoph Lameter <clameter@sgi.com>
Cc: Kemi Wang <kemi.wang@intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amdgpu: Fix SDMA HQD destroy error on gfx_v7

[ Upstream commit caaa4c8a6be2a275bd14f2369ee364978ff74704 ]

A wrong register bit was examinated for checking SDMA status so it reports
false failures. This typo only appears on gfx_v7. gfx_v8 checks the correct
bit.

Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Amber Lin <Amber.Lin@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/kvm/lapic: always disable MMIO interface in x2APIC mode

[ Upstream commit d1766202779e81d0f2a94c4650a6ba31497d369d ]

When VMX is used with flexpriority disabled (because of no support or
if disabled with module parameter) MMIO interface to lAPIC is still
available in x2APIC mode while it shouldn't be (kvm-unit-tests):

PASS: apic_disable: Local apic enabled in x2APIC mode
PASS: apic_disable: CPUID.1H:EDX.APIC[bit 9] is set
FAIL: apic_disable: *0xfee00030: 50014

The issue appears because we basically do nothing while switching to
x2APIC mode when APIC access page is not used. apic_mmio_{read,write}
only check if lAPIC is disabled before proceeding to actual write.

When APIC access is virtualized we correctly manipulate with VMX controls
in vmx_set_virtual_apic_mode() and we don't get vmexits from memory writes
in x2APIC mode so there's no issue.

Disabling MMIO interface seems to be easy. The question is: what do we
do with these reads and writes? If we add apic_x2apic_mode() check to
apic_mmio_in_range() and return -EOPNOTSUPP these reads and writes will
go to userspace. When lAPIC is in kernel, Qemu uses this interface to
inject MSIs only (see kvm_apic_mem_write() in hw/i386/kvm/apic.c). This
somehow works with disabled lAPIC but when we're in xAPIC mode we will
get a real injected MSI from every write to lAPIC. Not good.

The simplest solution seems to be to just ignore writes to the region
and return ~0 for all reads when we're in x2APIC mode. This is what this
patch does. However, this approach is inconsistent with what currently
happens when flexpriority is enabled: we allocate APIC access page and
create KVM memory region so in x2APIC modes all reads and writes go to
this pre-allocated page which is, btw, the same for all vCPUs.

Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

clk: x86: Stop marking clocks as CLK_IS_CRITICAL

[ Upstream commit 648e921888ad96ea3dc922739e96716ad3225d7f ]

Commit d31fd43c0f9a ("clk: x86: Do not gate clocks enabled by the
firmware"), which added the code to mark clocks as CLK_IS_CRITICAL, causes
all unclaimed PMC clocks on Cherry Trail devices to be on all the time,
resulting on the device not being able to reach S0i3 when suspended.

The reason for this commit is that on some Bay Trail / Cherry Trail devices
the r8169 ethernet controller uses pmc_plt_clk_4. Now that the clk-pmc-atom
driver exports an "ether_clk" alias for pmc_plt_clk_4 and the r8169 driver
has been modified to get and enable this clock (if present) the marking of
the clocks as CLK_IS_CRITICAL is no longer necessary.

This commit removes the CLK_IS_CRITICAL marking, fixing Cherry Trail
devices not being able to reach S0i3 greatly decreasing their battery
drain when suspended.

Buglink: https://bugzilla.kernel.org/show_bug.cgi?id=193891#c102
Buglink: https://bugzilla.kernel.org/show_bug.cgi?id=196861
Cc: Johannes Stezenbach <js@sig21.net>
Cc: Carlo Caione <carlo@endlessm.com>
Reported-by: Johannes Stezenbach <js@sig21.net>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

clk: x86: add "ether_clk" alias for Bay Trail / Cherry Trail

[ Upstream commit b1e3454d39f992e5409cd19f97782185950df6e7 ]

Commit d31fd43c0f9a ("clk: x86: Do not gate clocks enabled by the
firmware") causes all unclaimed PMC clocks on Cherry Trail devices to be on
all the time, resulting on the device not being able to reach S0i2 or S0i3
when suspended.

The reason for this commit is that on some Bay Trail / Cherry Trail devices
the ethernet controller uses pmc_plt_clk_4. This commit adds an "ether_clk"
alias, so that the relevant ethernet drivers can try to (optionally) use
this, without needing X86 specific code / hacks, thus fixing ethernet on
these devices without breaking S0i3 support.

This commit uses clkdev_hw_create() to create the alias, mirroring the code
for the already existing "mclk" alias for pmc_plt_clk_3.

Buglink: https://bugzilla.kernel.org/show_bug.cgi?id=193891#c102
Buglink: https://bugzilla.kernel.org/show_bug.cgi?id=196861
Cc: Johannes Stezenbach <js@sig21.net>
Cc: Carlo Caione <carlo@endlessm.com>
Reported-by: Johannes Stezenbach <js@sig21.net>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PCI: hv: support reporting serial number as slot information

[ Upstream commit a15f2c08c70811f120d99288d81f70d7f3d104f1 ]

The Hyper-V host API for PCI provides a unique "serial number" which
can be used as basis for sysfs PCI slot table. This can be useful
for cases where userspace wants to find the PCI device based on
serial number.

When an SR-IOV NIC is added, the host sends an attach message
with serial number. The kernel doesn't use the serial number, but
it is useful when doing the same thing in a userspace driver such
as the DPDK. By having /sys/bus/pci/slots/N it provides a direct
way to find the matching PCI device.

There maybe some cases where serial number is not unique such
as when using GPU's. But the PCI slot infrastructure will handle
that.

This has a side effect which may also be useful. The common udev
network device naming policy uses the slot information (rather
than PCI address).

Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: dts: at91: add new compatibility string for macb on sama5d3

[ Upstream commit 321cc359d899a8e988f3725d87c18a628e1cc624 ]

We need this new compatibility string as we experienced different behavior
for this 10/100Mbits/s macb interface on this particular SoC.
Backward compatibility is preserved as we keep the alternative strings.

Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: macb: disable scatter-gather for macb on sama5d3

[ Upstream commit eb4ed8e2d7fecb5f40db38e4498b9ee23cddf196 ]

Create a new configuration for the sama5d3-macb new compatibility string.
This configuration disables scatter-gather because we experienced lock down
of the macb interface of this particular SoC under very high load.

Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

stmmac: fix valid numbers of unicast filter entries

[ Upstream commit edf2ef7242805e53ec2e0841db26e06d8bc7da70 ]

Synopsys DWC Ethernet MAC can be configured to have 1..32, 64, or
128 unicast filter entries. (Table 7-8 MAC Address Registers from
databook) Fix dwmac1000_validate_ucast_entries() to accept values
between 1 and 32 in addition.

Signed-off-by: Jongsung Kim <neidhard.kim@lge.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

hv_netvsc: fix schedule in RCU context

[ Upstream commit 018349d70f28a78d5343b3660cb66e1667005f8a ]

When netvsc device is removed it can call reschedule in RCU context.
This happens because canceling the subchannel setup work could (in theory)
cause a reschedule when manipulating the timer.

To reproduce, run with lockdep enabled kernel and unbind
a network device from hv_netvsc (via sysfs).

[  160.682011] WARNING: suspicious RCU usage
[  160.707466] 4.19.0-rc3-uio+ #2 Not tainted
[  160.709937] -----------------------------
[  160.712352] ./include/linux/rcupdate.h:302 Illegal context switch in RCU read-side critical section!
[  160.723691]
[  160.723691] other info that might help us debug this:
[  160.723691]
[  160.730955]
[  160.730955] rcu_scheduler_active = 2, debug_locks = 1
[  160.762813] 5 locks held by rebind-eth.sh/1812:
[  160.766851]  #0: 000000008befa37a (sb_writers#6){.+.+}, at: vfs_write+0x184/0x1b0
[  160.773416]  #1: 00000000b097f236 (&of->mutex){+.+.}, at: kernfs_fop_write+0xe2/0x1a0
[  160.783766]  #2: 0000000041ee6889 (kn->count#3){++++}, at: kernfs_fop_write+0xeb/0x1a0
[  160.787465]  #3: 0000000056d92a74 (&dev->mutex){....}, at: device_release_driver_internal+0x39/0x250
[  160.816987]  #4: 0000000030f6031e (rcu_read_lock){....}, at: netvsc_remove+0x1e/0x250 [hv_netvsc]
[  160.828629]
[  160.828629] stack backtrace:
[  160.831966] CPU: 1 PID: 1812 Comm: rebind-eth.sh Not tainted 4.19.0-rc3-uio+ #2
[  160.832952] Hardware name: Microsoft Corporation Virtual Machine/Virtual Machine, BIOS Hyper-V UEFI Release v1.0 11/26/2012
[  160.832952] Call Trace:
[  160.832952]  dump_stack+0x85/0xcb
[  160.832952]  ___might_sleep+0x1a3/0x240
[  160.832952]  __flush_work+0x57/0x2e0
[  160.832952]  ? __mutex_lock+0x83/0x990
[  160.832952]  ? __kernfs_remove+0x24f/0x2e0
[  160.832952]  ? __kernfs_remove+0x1b2/0x2e0
[  160.832952]  ? mark_held_locks+0x50/0x80
[  160.832952]  ? get_work_pool+0x90/0x90
[  160.832952]  __cancel_work_timer+0x13c/0x1e0
[  160.832952]  ? netvsc_remove+0x1e/0x250 [hv_netvsc]
[  160.832952]  ? __lock_is_held+0x55/0x90
[  160.832952]  netvsc_remove+0x9a/0x250 [hv_netvsc]
[  160.832952]  vmbus_remove+0x26/0x30
[  160.832952]  device_release_driver_internal+0x18a/0x250
[  160.832952]  unbind_store+0xb4/0x180
[  160.832952]  kernfs_fop_write+0x113/0x1a0
[  160.832952]  __vfs_write+0x36/0x1a0
[  160.832952]  ? rcu_read_lock_sched_held+0x6b/0x80
[  160.832952]  ? rcu_sync_lockdep_assert+0x2e/0x60
[  160.832952]  ? __sb_start_write+0x141/0x1a0
[  160.832952]  ? vfs_write+0x184/0x1b0
[  160.832952]  vfs_write+0xbe/0x1b0
[  160.832952]  ksys_write+0x55/0xc0
[  160.832952]  do_syscall_64+0x60/0x1b0
[  160.832952]  entry_SYSCALL_64_after_hwframe+0x49/0xbe
[  160.832952] RIP: 0033:0x7fe48f4c8154

Resolve this by getting RTNL earlier. This is safe because the subchannel
work queue does trylock on RTNL and will detect the race.

Fixes: 7b2ee50c0cd5 ("hv_netvsc: common detach logic")
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sound: don't call skl_init_chip() to reset intel skl soc

[ Upstream commit 75383f8d39d4c0fb96083dd460b7b139fbdac492 ]

Internally, skl_init_chip() calls snd_hdac_bus_init_chip() which
1) sets bus->chip_init to prevent multiple entrances before device
is stopped; 2) enables interrupt.

We shouldn't use it for the purpose of resetting device only because
1) when we really want to initialize device, we won't be able to do
so; 2) we are ready to handle interrupt yet, and kernel crashes when
interrupt comes in.

Rename azx_reset() to snd_hdac_bus_reset_link(), and use it to reset
device properly.

Fixes: 60767abcea3d ("ASoC: Intel: Skylake: Reset the controller in probe")
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Yu Zhao <yuzhao@google.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sound: enable interrupt after dma buffer initialization

[ Upstream commit b61749a89f826eb61fc59794d9e4697bd246eb61 ]

In snd_hdac_bus_init_chip(), we enable interrupt before
snd_hdac_bus_init_cmd_io() initializing dma buffers. If irq has
been acquired and irq handler uses the dma buffer, kernel may crash
when interrupt comes in.

Fix the problem by postponing enabling irq after dma buffer
initialization. And warn once on null dma buffer pointer during the
initialization.

Reviewed-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Yu Zhao <yuzhao@google.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: qla2xxx: Fix an endian bug in fcpcmd_is_corrupted()

[ Upstream commit cbe3fd39d223f14b1c60c80fe9347a3dd08c2edb ]

We should first do the le16_to_cpu endian conversion and then apply the
FCP_CMD_LENGTH_MASK mask.

Fixes: 5f35509db179 ("qla2xxx: Terminate exchange if corrupted")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Quinn Tran <Quinn.Tran@cavium.com>
Acked-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: iscsi: target: Don't use stack buffer for scatterlist

[ Upstream commit 679fcae46c8b2352bba3485d521da070cfbe68e6 ]

Fedora got a bug report of a crash with iSCSI:

kernel BUG at include/linux/scatterlist.h:143!
...
RIP: 0010:iscsit_do_crypto_hash_buf+0x154/0x180 [iscsi_target_mod]
...
 Call Trace:
  ? iscsi_target_tx_thread+0x200/0x200 [iscsi_target_mod]
  iscsit_get_rx_pdu+0x4cd/0xa90 [iscsi_target_mod]
  ? native_sched_clock+0x3e/0xa0
  ? iscsi_target_tx_thread+0x200/0x200 [iscsi_target_mod]
  iscsi_target_rx_thread+0x81/0xf0 [iscsi_target_mod]
  kthread+0x120/0x140
  ? kthread_create_worker_on_cpu+0x70/0x70
  ret_from_fork+0x3a/0x50

This is a BUG_ON for using a stack buffer with a scatterlist.  There
are two cases that trigger this bug. Switch to using a dynamically
allocated buffer for one case and do not assign a NULL buffer in
another case.

Signed-off-by: Laura Abbott <labbott@redhat.com>
Reviewed-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mfd: omap-usb-host: Fix dts probe of children

[ Upstream commit 10492ee8ed9188d6d420e1f79b2b9bdbc0624e65 ]

It currently only works if the parent bus uses "simple-bus". We
currently try to probe children with non-existing compatible values.
And we're missing .probe.

I noticed this while testing devices configured to probe using ti-sysc
interconnect target module driver. For that we also may want to rebind
the driver, so let's remove __init and __exit.

Signed-off-by: Tony Lindgren <tony@atomide.com>
Acked-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Bluetooth: hci_ldisc: Free rw_semaphore on close

[ Upstream commit e6a57d22f787e73635ce0d29eef0abb77928b3e9 ]

The percpu_rw_semaphore is not currently freed, and this leads to
a crash when the stale rcu callback is invoked.  DEBUG_OBJECTS
detects this.

 ODEBUG: free active (active state 1) object type: rcu_head hint: (null)
 ------------[ cut here ]------------
 WARNING: CPU: 1 PID: 2024 at debug_print_object+0xac/0xc8
 PC is at debug_print_object+0xac/0xc8
 LR is at debug_print_object+0xac/0xc8
 Call trace:
 [<ffffff80082e2c2c>] debug_print_object+0xac/0xc8
 [<ffffff80082e40b0>] debug_check_no_obj_freed+0x1e8/0x228
 [<ffffff8008191254>] kfree+0x1cc/0x250
 [<ffffff80083cc03c>] hci_uart_tty_close+0x54/0x108
 [<ffffff800832e118>] tty_ldisc_close.isra.1+0x40/0x58
 [<ffffff800832e14c>] tty_ldisc_kill+0x1c/0x40
 [<ffffff800832e3dc>] tty_ldisc_release+0x94/0x170
 [<ffffff8008325554>] tty_release_struct+0x1c/0x58
 [<ffffff8008326400>] tty_release+0x3b0/0x490
 [<ffffff80081a3fe8>] __fput+0x88/0x1d0
 [<ffffff80081a418c>] ____fput+0xc/0x18
 [<ffffff80080c0624>] task_work_run+0x9c/0xc0
 [<ffffff80080a9e24>] do_exit+0x24c/0x8a0
 [<ffffff80080aa4e0>] do_group_exit+0x38/0xa0
 [<ffffff80080aa558>] __wake_up_parent+0x0/0x28
 [<ffffff8008082c00>] el0_svc_naked+0x34/0x38
 ---[ end trace bfe08cbd89098cdf ]---

Signed-off-by: Hermes Zhang <chenhuiz@axis.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: rsnd: don't fallback to PIO mode when -EPROBE_DEFER

[ Upstream commit 6c92d5a2744e27619a8fcc9d74b91ee9f1cdebd1 ]

Current rsnd driver will fallback to PIO mode if it can't get DMA
handler. But, DMA might return -EPROBE_DEFER when probe timing.
This driver always fallback to PIO mode especially from
commit ac6bbf0cdf4206c ("iommu: Remove IOMMU_OF_DECLARE") because
of this reason.

The DMA driver will be probed later, but sound driver might be
probed as PIO mode in such case. This patch fixup this issue.
Then, -EPROBE_DEFER is not error. Thus, let's don't indicate error
message in such case.
And it needs to call rsnd_adg_remove() individually if probe failed,
because it registers clk which should be unregister.

Maybe PIO fallback feature itself is not needed,
but let's keep it so far.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: rsnd: adg: care clock-frequency size

[ Upstream commit 69235ccf491d2e26aefd465c0d3ccd1e3b2a9a9c ]

ADG has buffer over flow bug if DT has more than 3 clock-frequency.
This patch fixup this issue, and uses first 2 values.

clock-frequency = <x y>; /* this is OK */
clock-frequency = <x y z>; /* this is NG */

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

selftests: memory-hotplug: add required configs

[ Upstream commit 4d85af102a66ee6aeefa596f273169e77fb2b48e ]

add CONFIG_MEMORY_HOTREMOVE=y in config
without this config, /sys/devices/system/memory/memory*/removable
always return 0, I endup getting an early skip during test

Signed-off-by: Lei Yang <Lei.Yang@windriver.com>
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

selftests/efivarfs: add required kernel configs

[ Upstream commit 53cf59d6c0ad3edc4f4449098706a8f8986258b6 ]

add config file

Signed-off-by: Lei Yang <Lei.Yang@windriver.com>
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: sigmadsp: safeload should not have lower byte limit

[ Upstream commit 5ea752c6efdf5aa8a57aed816d453a8f479f1b0a ]

Fixed range in safeload conditional to allow safeload to up to 20 bytes,
without a lower limit.

Signed-off-by: Danny Smith <dannys@axis.com>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: wm8804: Add ACPI support

[ Upstream commit 960cdd50ca9fdfeb82c2757107bcb7f93c8d7d41 ]

HID made of either Wolfson/CirrusLogic PCI ID + 8804 identifier.

This helps enumerate the HifiBerry Digi+ HAT boards on the Up2 platform.

The scripts at https://github.com/thesofproject/acpi-scripts can be
used to add the ACPI initrd overlays.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: rt5514: Fix the issue of the delay volume applied again

[ Upstream commit 6f0a256253f48095ba2e5bcdfbed41f21643c105 ]

After our evaluation, we need to modify the default values to make sure
the volume applied immediately.

Signed-off-by: Oder Chiou <oder_chiou@realtek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

inet: make sure to grab rcu_read_lock before using ireq->ireq_opt

[ Upstream commit 2ab2ddd301a22ca3c5f0b743593e4ad2953dfa53 ]

Timer handlers do not imply rcu_read_lock(), so my recent fix
triggered a LOCKDEP warning when SYNACK is retransmit.

Lets add rcu_read_lock()/rcu_read_unlock() pairs around ireq->ireq_opt
usages instead of guessing what is done by callers, since it is
not worth the pain.

Get rid of ireq_opt_deref() helper since it hides the logic
without real benefit, since it is now a standard rcu_dereference().

Fixes: 1ad98e9d1bdf ("tcp/dccp: fix lockdep issue when SYN is backlogged")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tcp/dccp: fix lockdep issue when SYN is backlogged

[ Upstream commit 1ad98e9d1bdf4724c0a8532fabd84bf3c457c2bc ]

In normal SYN processing, packets are handled without listener
lock and in RCU protected ingress path.

But syzkaller is known to be able to trick us and SYN
packets might be processed in process context, after being
queued into socket backlog.

In commit 06f877d613be ("tcp/dccp: fix other lockdep splats
accessing ireq_opt") I made a very stupid fix, that happened
to work mostly because of the regular path being RCU protected.

Really the thing protecting ireq->ireq_opt is RCU read lock,
and the pseudo request refcnt is not relevant.

This patch extends what I did in commit 449809a66c1d ("tcp/dccp:
block BH for SYN processing") by adding an extra rcu_read_{lock|unlock}
pair in the paths that might be taken when processing SYN from
socket backlog (thus possibly in process context)

Fixes: 06f877d613be ("tcp/dccp: fix other lockdep splats accessing ireq_opt")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net-ethtool: ETHTOOL_GUFO did not and should not require CAP_NET_ADMIN

[ Upstream commit 474ff2600889e16280dbc6ada8bfecb216169a70 ]

So it should not fail with EPERM even though it is no longer implemented...

This is a fix for:
  (userns)$ egrep ^Cap /proc/self/status
  CapInh: 0000003fffffffff
  CapPrm: 0000003fffffffff
  CapEff: 0000003fffffffff
  CapBnd: 0000003fffffffff
  CapAmb: 0000003fffffffff

  (userns)$ tcpdump -i usb_rndis0
  tcpdump: WARNING: usb_rndis0: SIOCETHTOOL(ETHTOOL_GUFO) ioctl failed: Operation not permitted
  Warning: Kernel filter failed: Bad file descriptor
  tcpdump: can't remove kernel filter: Bad file descriptor

With this change it returns EOPNOTSUPP instead of EPERM.

See also https://github.com/the-tcpdump-group/libpcap/issues/689

Fixes: 08a00fea6de2 "net: Remove references to NETIF_F_UFO from ethtool."
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Maciej Żenczykowski <maze@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bnxt_en: don't try to offload VLAN 'modify' action

[ Upstream commit 8c6ec3613e7b0aade20a3196169c0bab32ed3e3f ]

bnxt offload code currently supports only 'push' and 'pop' operation: let
.ndo_setup_tc() return -EOPNOTSUPP if VLAN 'modify' action is configured.

Fixes: 2ae7408fedfe ("bnxt_en: bnxt: add TC flower filter offload support")
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Acked-by: Sathya Perla <sathya.perla@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nfp: avoid soft lockups under control message storm

[ Upstream commit ff58e2df62ce29d0552278c290ae494b30fe0c6f ]

When FW floods the driver with control messages try to exit the cmsg
processing loop every now and then to avoid soft lockups.  Cmsg
processing is generally very lightweight so 512 seems like a reasonable
budget, which should not be exceeded under normal conditions.

Fixes: 77ece8d5f196 ("nfp: add control vNIC datapath")
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Tested-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bonding: fix warning message

[ Upstream commit 0f3b914c9cfcd7bbedd445dc4ac5dd999fa213c2 ]

RX queue config for bonding master could be different from its slave
device(s). With the commit 6a9e461f6fe4 ("bonding: pass link-local
packets to bonding master also."), the packet is reinjected into stack
with skb->dev as bonding master. This potentially triggers the
message:

   "bondX received packet on queue Y, but number of RX queues is Z"

whenever the queue that packet is received on is higher than the
numrxqueues on bonding master (Y > Z).

Fixes: 6a9e461f6fe4 ("bonding: pass link-local packets to bonding master also.")
Reported-by: John Sperbeck <jsperbeck@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Mahesh Bandewar <maheshb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bonding: pass link-local packets to bonding master also.

[ Upstream commit 6a9e461f6fe4434e6172304b69774daff9a3ac4c ]

Commit b89f04c61efe ("bonding: deliver link-local packets with
skb->dev set to link that packets arrived on") changed the behavior
of how link-local-multicast packets are processed. The change in
the behavior broke some legacy use cases where these packets are
expected to arrive on bonding master device also.

This patch passes the packet to the stack with the link it arrived
on as well as passes to the bonding-master device to preserve the
legacy use case.

Fixes: b89f04c61efe ("bonding: deliver link-local packets with skb->dev set to link that packets arrived on")
Reported-by: Michal Soltys <soltys@ziu.info>
Signed-off-by: Mahesh Bandewar <maheshb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/mlx5: E-Switch, Fix out of bound access when setting vport rate

[ Upstream commit 11aa5800ed66ed0415b7509f02881c76417d212a ]

The code that deals with eswitch vport bw guarantee was going beyond the
eswitch vport array limit, fix that.  This was pointed out by the kernel
address sanitizer (KASAN).

The error from KASAN log:
[2018-09-15 15:04:45] BUG: KASAN: slab-out-of-bounds in
mlx5_eswitch_set_vport_rate+0x8c1/0xae0 [mlx5_core]

Fixes: c9497c98901c ("net/mlx5: Add support for setting VF min rate")
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: aquantia: memory corruption on jumbo frames

[ Upstream commit d26ed6b0e5e23190d43ab34bc69cbecdc464a2cf ]

This patch fixes skb_shared area, which will be corrupted
upon reception of 4K jumbo packets.

Originally build_skb usage purpose was to reuse page for skb to eliminate
needs of extra fragments. But that logic does not take into account that
skb_shared_info should be reserved at the end of skb data area.

In case packet data consumes all the page (4K), skb_shinfo location
overflows the page. As a consequence, __build_skb zeroed shinfo data above
the allocated page, corrupting next page.

The issue is rarely seen in real life because jumbo are normally larger
than 4K and that causes another code path to trigger.
But it 100% reproducible with simple scapy packet, like:

    sendp(IP(dst="192.168.100.3") / TCP(dport=443) \
          / Raw(RandString(size=(4096-40))), iface="enp1s0")

Fixes: 018423e90bee ("net: ethernet: aquantia: Add ring support code")

Reported-by: Friedemann Gerold <f.gerold@b-c-s.de>
Reported-by: Michael Rauch <michael@rauch.be>
Signed-off-by: Friedemann Gerold <f.gerold@b-c-s.de>
Tested-by: Nikita Danilov <nikita.danilov@aquantia.com>
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>