[media] zd1301_demod: ZyDAS ZD1301 DVB-T demodulator driver

ZyDAS ZD1301 is chip having USB interface and DVB-T demodulator
integrated. This driver is for demodulator part.
Driver is very reduced, just basic demodulator functionality, no
statistics at all. It registers as a platform driver to driver core.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] mt2060: add param to split long i2c writes

Add configuration parameter to split long i2c writes as some I2C
adapters cannot write 10 bytes used as a one go.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] mt2060: add i2c bindings

Add proper i2c driver model bindings.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] ivtv: use pr_foo() instead of calling printk() directly

pr_foo() provides a convenient way for printk's, enforcing
that they'll all prepend the error message with the driver's
name.

Use it inside ivtv.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] ivtv: prepare to convert to pr_foo()

Move the pr_fmt() macro to ivtv_driver.h and ensure that it
will be the first file to be included on all ivtv files.

While here, put the includes inside ivtv-driver.h on
alphabetic order.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] st-hva: hva_dbg_summary() should be static

As reported by gcc:

drivers/media/platform/sti/hva/hva-v4l2.c:227:6: warning: no previous prototype for 'hva_dbg_summary' [-Wmissing-prototypes]
 void hva_dbg_summary(struct hva_ctx *ctx)
      ^~~~~~~~~~~~~~~

This function is used only internally, so make it static.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] st-hva: add debug file system

This patch creates 4 static debugfs entries to dump:
- the device-related information ("st-hva/device")
- the list of registered encoders ("st-hva/encoders")
- the current values of the hva registers ("st-hva/regs")
- the information about the last closed instance ("st-hva/last")

It also creates dynamically a debugfs entry for each opened instance,
("st-hva/<instance identifier>") to dump:
- the information about the frame (format, resolution)
- the information about the stream (format, profile, level,
  resolution)
- the control parameters (bitrate mode, framerate, GOP size...)
- the potential (system, encoding...) errors
- the performance information about the encoding (HW processing
  duration, average bitrate, average framerate...)
Each time a running instance is closed, its context (including the
debug information) is saved to feed, on demand, the last closed
instance debugfs entry.

Signed-off-by: Yannick Fertre <yannick.fertre@st.com>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Jean-Christophe Trotin <jean-christophe.trotin@st.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] st-hva: encoding summary at instance release

This patch adds a short summary about the encoding operation at each
instance closing, for debug purpose (through dev_dbg()):
- information about the frame (format, resolution)
- information about the stream (format, profile, level, resolution)
- number of encoded frames
- potential (system, encoding...) errors

Signed-off-by: Yannick Fertre <yannick.fertre@st.com>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Jean-Christophe Trotin <jean-christophe.trotin@st.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] ov9650: use msleep() for uncritical long delay

ulseep_range() uses hrtimers and provides no advantage over msleep()
for larger delays. Fix up the 25ms delays here to use msleep() and
reduce the load on the hrtimer subsystem.

Link: http://lkml.org/lkml/2017/1/11/377
Reviwed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] v4l: mt9v032: Remove unneeded gpiod NULL check

The gpiod API checks for NULL descriptors, there's no need to duplicate
the check in the driver.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

Revert "[media] coda/imx-vdoa: constify structs"

Despite checkpatch comments, it seems that ARM doesn't like
to use constified structs.

As reported by kernel build robot:

 In file included from drivers/media/platform/coda/imx-vdoa.c:22:0:
   drivers/media/platform/coda/imx-vdoa.c: In function 'vdoa_driver_init':
>> include/linux/device.h:1461:20: warning: passing argument 1 of '__platform_driver_register' discards 'const' qualifier from pointer target type [-Wdiscarded-qualifiers]
     return __register(&(__driver) , ##__VA_ARGS__); \
                       ^
   include/linux/platform_device.h:198:29: note: in definition of macro 'platform_driver_register'
     __platform_driver_register(drv, THIS_MODULE)
                                ^~~
   include/linux/platform_device.h:228:2: note: in expansion of macro 'module_driver'
     module_driver(__platform_driver, platform_driver_register, \
     ^~~~~~~~~~~~~
>> drivers/media/platform/coda/imx-vdoa.c:333:1: note: in expansion of macro 'module_platform_driver'
    module_platform_driver(vdoa_driver);
    ^~~~~~~~~~~~~~~~~~~~~~
   include/linux/platform_device.h:199:12: note: expected 'struct platform_driver *' but argument is of type 'const struct platform_driver *'
    extern int __platform_driver_register(struct platform_driver *,
               ^~~~~~~~~~~~~~~~~~~~~~~~~~
   In file included from drivers/media/platform/coda/imx-vdoa.c:18:0:
   drivers/media/platform/coda/imx-vdoa.c: In function 'vdoa_driver_exit':
>> include/linux/device.h:1466:15: warning: passing argument 1 of 'platform_driver_unregister' discards 'const' qualifier from pointer target type [-Wdiscarded-qualifiers]
     __unregister(&(__driver) , ##__VA_ARGS__); \
                  ^
   include/linux/platform_device.h:228:2: note: in expansion of macro 'module_driver'
     module_driver(__platform_driver, platform_driver_register, \
     ^~~~~~~~~~~~~
>> drivers/media/platform/coda/imx-vdoa.c:333:1: note: in expansion of macro 'module_platform_driver'
    module_platform_driver(vdoa_driver);
    ^~~~~~~~~~~~~~~~~~~~~~
   In file included from drivers/media/platform/coda/imx-vdoa.c:22:0:
   include/linux/platform_device.h:201:13: note: expected 'struct platform_driver *' but argument is of type 'const struct platform_driver *'
    extern void platform_driver_unregister(struct platform_driver *);
                ^~~~~~~~~~~~~~~~~~~~~~~~~~

So, let's just remove it.

This reverts commit 126f52b02e6ec6a25f0b32058a91648304922d4a.

Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] v4l: omap4iss: Clean up file handle in open() and release()

Both functions initialize the file handle with v4l2_fh_init() and thus
need to call clean up with v4l2_fh_exit() as appropriate. Fix it.

Signed-off-by: Shailendra Verma <shailendra.v@samsung.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] v4l: omap3isp: Clean up file handle in open() and release()

Both functions initialize the file handle with v4l2_fh_init() and thus
need to call clean up with v4l2_fh_exit() as appropriate. Fix it.

Signed-off-by: Shailendra Verma <shailendra.v@samsung.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] uvcvideo: Change result code of debugfs_init to void

The device driver should keep going even if debugfs initialization fails.
So, change the return type to void.

Signed-off-by: Jaejoong Kim <climbbb.kim@gmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] uvcvideo: Fix a wrong macro

Don't mix up UVC_BUF_STATE_* and VB2_BUF_STATE_* codes.

Fixes: 6998b6fb4b1c ("[media] uvcvideo: Use videobuf2-vmalloc")

Cc: stable@vger.kernel.org
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@intel.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] uvcvideo: (cosmetic) Remove a superfluous assignment

Remove a superfluous assignment to a local variable at the end of a
function.

Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@intel.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] uvcvideo: (cosmetic) Add and use an inline function

Add an inline function to obtain a struct uvc_buffer pointer from a
struct vb2_v4l2_buffer one.

Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@intel.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] af9033: estimate cnr from formula

Use formulas for cnr estimates and get rid of old lut-based estimate.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] af9035: correct demod i2c addresses

Chip uses so called 8-bit i2c addresses, but on bus there is of
course correct 7-bit addresses with rw bit as lsb - verified
with oscilloscope.

Lets still use correct addresses in driver.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] it913x: add chip device ids for binding

Driver supports 2 different device versions, AX and BX. Use device
IDs to pass chip version information to driver.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] af9035: register it9133 tuner using platform binding

it913x tuner driver is changed to platform model so we need bind it
using platform_device_register_data().

Also remove hacks from I2C adapter where fake tuner driver address
(addr >> 1) were used as those are no longer needed.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] it913x: change driver model from i2c to platform

That tuner is integrated to demodulator and communicates via
demodulators address space. We cannot register both demodulator
and tuner having same address to same I2C bus, so better to change
it platform driver in order to implement I2C adapter correctly.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] af9033: return regmap for integrated IT913x tuner driver

IT9130 series contains integrated tuner driver, which uses that
demodulator address space. Return regmap in order to allow it913x
driver communication.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] af9033: style related and minor changes

Fix coding style and other small issues.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] af9033: use 64-bit div macro where possible

Replace Booth's binary division algo with 64-bit multiply and division.
Fix related IF calculations.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] af9033: convert to regmap api

Use regmap to cover I2C register operations.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] af9035: read and store whole eeprom

Read eeprom content to chip state and read values there when needed.
Also debug dump eeprom content.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] si2168: implement ucb statistics

Implement DVBv5 UCB. Only uncorrected blocks are currently counted.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] si2168: implement ber statistics

Implement DVBv5 BER.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] mark myself as mainainer for camera on N900

Mark and Sakari as maintainers for Nokia N900 camera pieces.

Signed-off-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] media: Driver for Toshiba et8ek8 5MP sensor

Add driver for et8ek8 sensor, found in Nokia N900 main camera. Can be
used for taking photos in 2.5MP resolution with fcam-dev.

Signed-off-by: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] media: et8ek8: add device tree binding documentation

Add device tree binding documentation for toshiba et8ek8 sensor.

Signed-off-by: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] exynos4-is: constify v4l2_subdev_* structures

v4l2_subdev_{core/pad/video}_ops structures are stored in the
fields of the v4l2_subdev_ops structure which are of type const.
Also, v4l2_subdev_ops structure is passed to a function
having its argument of type const. As these structures are never
modified, so declare them as const.
Done using Coccinelle:(one of the scripts used)

@r1 disable optional_qualifier @
identifier i;
position p;
@@
static struct v4l2_subdev_ops i@p = {...};

@ok1@
identifier r1.i;
position p;
expression e1;
@@
v4l2_subdev_init(e1,&i@p)

@bad@
position p!={r1.p,ok1.p};
identifier r1.i;
@@
i@p

@depends on !bad disable optional_qualifier@
identifier r1.i;
@@
+const
struct v4l2_subdev_ops i;

File size before:
   text    data     bss     dec     hex filename
  16830    1064       0   17894    45e6 platform/exynos4-is/fimc-capture.o
   7787     704      20    8511    213f platform/exynos4-is/mipi-csis.o

File size after:
   text    data     bss     dec     hex filename
  17022     880       0   17902    45ee platform/exynos4-is/fimc-capture.o
   8299     192      20    8511    213f platform/exynos4-is/mipi-csis.o

Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] exynos4-is: fimc-is: Unmap region obtained by of_iomap()

Free memory mapping, if fimc_is_probe is not successful.

Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] exynos-gsc: Fix unbalanced pm_runtime_enable() error

Commit a006c04e6218 ("[media] exynos-gsc: Fixup clock management at
->remove()") changed the driver's .remove function logic to fist do
a pm_runtime_get_sync() to make sure the device is powered before
attempting to gate the gsc clock.

But the commit also removed a pm_runtime_disable() call that leads
to an unbalanced pm_runtime_enable() error if the driver is removed
and re-probed:

exynos-gsc 13e00000.video-scaler: Unbalanced pm_runtime_enable!
exynos-gsc 13e10000.video-scaler: Unbalanced pm_runtime_enable!

Fixes: a006c04e6218 ("[media] exynos-gsc: Fixup clock management at ->remove()")

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] exynos-gsc: Clean up file handle in open() error path

The file handle is not yet added in the vfd list. So no need
to call v4l2_fh_del(&ctx->fh) if it fails to create controls.

Signed-off-by: Shailendra Verma <shailendra.v@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] exynos4-is: Clean up file handle in open() error path

The file handle is not yet added in the vfd list. So no need
to call v4l2_fh_del(&ctx->fh) if it fails to create controls.

Signed-off-by: Shailendra Verma <shailendra.v@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] cxd2820r: fix gpio null pointer dereference

Setting GPIOs during probe causes null pointer deference when
GPIOLIB was not selected by Kconfig. Initialize driver private
field before calling set gpios.

It is regressing bug since 4.9.

Fixes: 07fdf7d9f19f ("[media] cxd2820r: add I2C driver bindings")

Reported-by: Chris Rankin <rankincj@gmail.com>
Tested-by: Chris Rankin <rankincj@gmail.com>
Tested-by: Håkan Lennestål <hakan.lennestal@gmail.com>
Cc: <stable@vger.kernel.org> # v4.9+
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] coda: support YUYV output if VDOA is used

The VDOA is able to transform the NV12 custom macroblock tiled format of
the CODA to YUYV format. If and only if the VDOA is available, the
driver can also provide YUYV support.

While the driver is configured to produce YUYV output, the CODA must be
configured to produce NV12 macroblock tiled frames and the VDOA must
transform the intermediate result into the final YUYV output.

Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] coda: use VDOA for un-tiling custom macroblock format

If the CODA driver is configured to produce NV12 output and the VDOA is
available, the VDOA can be used to transform the custom macroblock tiled
format to a raster-ordered format for scanout.

In this case, set the output format of the CODA to the custom macroblock
tiled format, disable the rotator, and use the VDOA to write to the v4l2
buffer. The VDOA is synchronized with the CODA to always un-tile the
frame that the CODA finished in the previous run.

Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] coda: fix frame index to returned error

display_idx refers to the frame that will be returned in the next round.
The currently processed frame is ctx->display_idx and errors should be
reported for this frame.

Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] coda: add debug output about tiling

In order to make the VDOA work correctly, the CODA must produce frames
in tiled format. Print this information in the debug output.

Also print the color format in fourcc instead of the numeric value.

Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] coda: correctly set capture compose rectangle

Correctly store the rectangle of valid video data in the destination
q_data before rounding up to macroblock size. This fixes the output
of VIDIOC_G_SELECTION for the capture side compose rectangle.

Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] coda/imx-vdoa: constify structs

As warned by checkpatch:

WARNING: struct of_device_id should normally be const
#318: FILE: drivers/media/platform/coda/imx-vdoa.c:318:
+static struct of_device_id vdoa_dt_ids[] = {

So, constify structs.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] coda: add i.MX6 VDOA driver

The i.MX6 Video Data Order Adapter's (VDOA) sole purpose is to convert
from a custom macroblock tiled format produced by the CODA960 decoder
into linear formats that can be used for scanout.

Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] dt-bindings: Add a binding for Video Data Order Adapter

Add a DT binding documentation for the Video Data Order Adapter (VDOA)
of the Freescale i.MX6 SoC.

Also, add the compatible property and correct clock to the device tree
to match the documentation.

Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] pvrusb2-io: Add some spaces for better code readability

Use space characters at some source code places according to
the Linux coding style convention.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] pvrusb2-io: Use kmalloc_array() in pvr2_stream_buffer_count()

A multiplication for the size determination of a memory allocation
indicated that an array data structure should be processed.
Thus use the corresponding function "kmalloc_array".

This issue was detected by using the Coccinelle software.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] davinci: VPIF: add basic support for DT init

Add basic support for initialization via DT

Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] dt-bindings: add TI VPIF documentation

Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] davinci: vpif_capture: fix start/stop streaming locking

Video capture subdevs may be over I2C and may sleep during xfer, so we
cannot do IRQ-disabled locking when calling the subdev.

The IRQ-disabled locking is meant to protect the DMA queue list
throughout the rest of the driver, so update the locking in
[start|stop]_streaming to protect just this list, and update the irqlock
comment to reflect what it actually protects.

Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] davinci: vpif_capture: remove hard-coded I2C adapter id

Remove hard-coded I2C adapter in favor of getting the
ID from platform_data.

Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] davinci: VPIF: fix module loading, init errors

Fix problems with automatic module loading by adding MODULE_ALIAS.  Also
fix various load-time errors cause by incorrect or not present
platform_data.

Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] media: fix dm1105.c build error

Fix dm1105 build error when CONFIG_I2C_ALGOBIT=m and
CONFIG_DVB_DM1105=y.

drivers/built-in.o: In function `dm1105_probe':
dm1105.c:(.text+0x2836e7): undefined reference to `i2c_bit_add_bus'

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Cc: Javier Martinez Canillas <javier@osg.samsung.com>
Cc: stable@vger.kernel.org # applies to 4.0 (maybe even 3.x)
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] v4l: s5c73m3: fix negation operator

Bool values should be negated using logical operators. Using bitwise operators
results in unexpected and possibly incorrect results.

Reported-by: David Binderman <dcb314@hotmail.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] Add maintainers for camera on N900

Mark me and Sakari as maintainers for Nokia N900 camera pieces.

Signed-off-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] v4l2-async: Use kmalloc_array() in v4l2_async_notifier_unregister()

A multiplication for the size determination of a memory allocation
indicated that an array data structure should be processed.
Thus use the corresponding function "kmalloc_array".

This issue was detected by using the Coccinelle software.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] media: usb: cpia2: Use kmemdup instead of kmalloc and memcpy

When some other buffer is immediately copied into allocated region.
Replace calls to kmalloc followed by a memcpy with a direct
call to kmemdup.

Signed-off-by: Shyam Saini <mayhs11saini@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] pvrusb2: Clean up file handle in open() error path

Fix to avoid possible exit file handle in error paths.

Signed-off-by: Santosh Kumar Singh <kumar.san1093@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] ivtv: Clean up file handle in open() error path

Fix to avoid possible exit file handle in error paths.

Signed-off-by: Santosh Kumar Singh <kumar.san1093@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] tm6000: Clean up file handle in open() error path

Fix to avoid possible memory leak and exit file handle
in error paths.

Signed-off-by: Santosh Kumar Singh <kumar.san1093@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] zoran: Clean up file handle in open() error path

Fix to avoid possible memory leak and exit file handle
in error paths.

Signed-off-by: Santosh Kumar Singh <kumar.san1093@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] vim2m: Clean up file handle in open() error path

Fix to avoid possible memory leak and exit file handle
in error paths.

Signed-off-by: Santosh Kumar Singh <kumar.san1093@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] solo6x10: use designated initializers

Prepare to mark sensitive kernel structures for randomization by making
sure they're using designated initializers. These were identified during
allyesconfig builds of x86, arm, and arm64, with most initializer fixes
extracted from grsecurity.

Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] mtk-vcodec: use designated initializers

Prepare to mark sensitive kernel structures for randomization by making
sure they're using designated initializers. These were identified during
allyesconfig builds of x86, arm, and arm64, with most initializer fixes
extracted from grsecurity.

Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] bt8xx: fix memory leak

If dvb_attach() fails then we were just printing an error message and
exiting but the memory allocated to state was not released.

Signed-off-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] lirc: fix null dereference for tx-only devices

tx-only RC devices do not have a receive buffer.

Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] lirc: LIRC_GET_MIN_TIMEOUT should be in range

LIRC_SET_REC_TIMEOUT can fail if the value returned by
LIRC_GET_MIN_TIMEOUT is set due to rounding errors.

Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] rc: remove excessive spaces from error message

The current message has some wanted spaces on it:
rc_core: Loaded IR protocol module ir-jvc-decoder,                      but protocol jvc still not available

Merge it into a single line.

Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] lirc: fix transmit-only read features

An RC device which is transmit-only shouldn't have the
LIRC_CAN_REC_MODE2 feature.

Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] rc/keymaps: add a keytable for the GeekBox remote control

The GeekBox ships with a 12 button remote control which seems to use the
NEC protocol. The button keycodes were captured with the "ir-keytable"
tool (ir-keytable -p $PROTOCOL -t; human_button_pusher).

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] Documentation: devicetree: Add document bindings for mtk-cir

This patch adds documentation for devicetree bindings for
consumer Mediatek IR controller.

Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] Documentation: devicetree: move shared property used by rc into a common place

Most IR drivers uses the same label to identify the
scancode/key table they used by multiple bindings and lack
explanation well. So move the shared property into a common
place and give better explanation.

Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] rc: add driver for IR remote receiver on MT7623 SoC

This patch adds driver for IR controller on MT7623 SoC.
and should also work on similar Mediatek SoC. Currently
testing successfully on NEC and SONY remote controller
only but it should work on others (lirc, rc-5 and rc-6).

Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] rx51: broken build

As reported by kernel build test:

   In file included from arch/arm/mach-omap2/pdata-quirks.c:15:0:
>> arch/arm/mach-omap2/pdata-quirks.c:536:49: error: 'rx51_lirc_data' undeclared here (not in a function)
     OF_DEV_AUXDATA("nokia,n900-ir", 0, "n900-ir", &rx51_lirc_data),
                                                    ^
   include/linux/of_platform.h:52:21: note: in definition of macro 'OF_DEV_AUXDATA'
       .platform_data = _pdata }
                        ^~~~~~

Since "a92def1 [media] ir-rx51: port to rc-core" the build fails on
some arm configurations.

Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] staging/media/s5p-cec/exynos_hdmi_cecctrl.c Fixed blank line before closing brace '}'

Fixed checkpatch check blank line before closing brace '}'

Signed-off-by: Scott Matheina <scott@matheina.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] staging/s5p-cec: fixed alignment should match open parenthesis

Fixed Checkpatch check "Alignment should match open parenthesis"

Signed-off-by: Scott Matheina <scott@matheina.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] adv7170: drop redundant ret local

Simplifies return value logic of adv7170_set_fmt().

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] ov2659: remove NOP assignment

The loop over the ov2659_formats[] array just a few lines above
verifies that mf->code matches the selected array entry.

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] gp8psk: fix spelling mistake: "firmare" -> "firmware"

trivial fix to spelling mistake in err message

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] b2c2: fix spelling mistake: "Contunuity" -> "Continuity"

trivial fix to spelling mistake in deb_chk message

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] cobalt: fix spelling mistake: "Celcius" -> "Celsius"

trivial fix to spelling mistake in cobalt_info message. Anders Celsius
was the Swedish astronomer.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] dvb-frontends: fix spelling mistake on cx24123_pll_calcutate

trivial fix to spelling mistake of function name in err message,
should be cx24123_pll_calculate instead of cx24123_pll_calcutate.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] am437x-vpfe: always assign bpp variable

In vpfe_s_fmt(), when the sensor format and the requested format were
the same, bpp was assigned to vpfe->bpp without being initialized first.

Grab the bpp value that is currently used by using __vpfe_get_format()
instead of its wrapper, vpfe_try_fmt().

This use of uninitialized variable has been found by compiling the
kernel with clang.

Fixes: 417d2e507edc ("[media] media: platform: add VPFE capture driver
support for AM437X")

Cc: stable@vger.kernel.org
Signed-off-by: Nicolas Iooss <nicolas.iooss_linux@m4x.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] gen-errors.rst: document EIO

Document the EIO error since this can happen anywhere anytime and applications
should be aware of this.

Also fix typo: exaustive -> exhaustive

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] vivid: Enable 4k resolution for webcam capture device

Add 3840x2160 as valid resolution for the webcam capture input and
adjust the webcam intervals accordingly.

Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] media: s5p-cec: Remove references to non-existent PLAT_S5P symbol

Commit d78c16ccde96 ("ARM: SAMSUNG: Remove remaining legacy code")
removed the Kconfig symbol PLAT_S5P.
This patch remove the last occurrence of this symbol.

Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] media: s5p-cec: Remove unneeded linux/miscdevice.h include

s5p-cec: does not use any miscdevice so this patch remove this
unnecessary inclusion.

Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] adv7604: Initialize drive strength to default when using DT

The adv7604 driver platform data contains fields for configuring the drive
strength of the output pins. When probing the driver through DT these
fields are not explicitly initialized, which means they are left at 0. This
is a reserved setting for the drive strength configuration though and can
cause signal integrity issues.

Whether these signal integrity issues are visible depends on the PCB
specifics (e.g. the higher the load capacitance for the output the more
visible the issue). But it has been observed on existing solutions at high
pixel clock rates.

Initialize the drive strength settings to the power-on-reset value of the
device when probing through devicetree to avoid this issue.

Fixes: 0e158be0162b ("adv7604: Add DT support")

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] media: platform: soc_camera_platform : constify v4l2_subdev_* structures

v4l2_subdev_{core/video}_ops structures are stored in the
fields of the v4l2_subdev_ops structure which are of type const.
Also, v4l2_subdev_ops structure is passed to a function
having its argument of type const. As these structures are never
modified, so declare them as const.
Done using Coccinelle:(One of the scripts)

@r1 disable optional_qualifier @
identifier i;
position p;
@@
static struct v4l2_subdev_core_ops i@p = {...};

@ok1@
identifier r1.i;
position p;
struct v4l2_subdev_ops obj;
@@
obj.core=&i@p;

@bad@
position p!={r1.p,ok1.p};
identifier r1.i;
@@
i@p

@depends on !bad disable optional_qualifier@
identifier r1.i;
@@
+const
struct v4l2_subdev_core_ops i;

File size before:
    text   data     bss     dec     hex filename
    858     576       0    1434     59a soc_camera/soc_camera_platform.o

File size after:
  text    data     bss     dec     hex filename
   1234     192       0    1426     592 soc_camera/soc_camera_platform.o

Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] soc-camera: Fix a return value in case of error

If 'ov9640_reg_read()' does not return 0, then 'val' is left unmodified.
As it is not initialized either, the return value can be anything.

It is likely that returning the error code was expected here.

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] staging: lirc_imon: port remaining usb ids to imon and remove

The staging lirc_imon driver contains 4 usb ids. Two of those have a VFD
and two don't. The VFD code is exactly the same in the mainline imon
driver, so that part is easily ported.

The staging driver produces raw IR rather than scancodes for the four
devices, so I've ported the raw IR code from staging to mainline imon.

Now that mainline imon can handle these four devices, lirc_imon is no
longer needed.

Compile tested only.

Signed-off-by: Sean Young <sean@mess.org>
Cc: Venky Raju <dev@venky.ws>
Cc: Jarod Wilson <jarod@redhat.com>
Cc: Alexey Khoroshilov <khoroshilov@ispras.ru>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] staging: lirc_bt829: remove

This driver is for an old mach64 VT board, which also has a framebuffer
driver (atyfb) and userspace mach64 X driver.

It was merged in 2010 and noone has attempted to port it to rc-core,
which would be necessary to get it out of staging.

I have not been able to track down the hardware either.

Signed-off-by: Sean Young <sean@mess.org>
Cc: Jarod Wilson <jarod@redhat.com>
Cc: Leonid Froenchenko <lfroen@galileo.co.il>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] staging: lirc_parallel: remove

The lirc_parallel driver was merged in 2010 and noone has attempted
to do the work necessary to get it out of staging (i.e. port it to
rc-core). I have not been able to find one of these devices, and
a machine with a parallel port is pretty rare too.

Signed-off-by: Sean Young <sean@mess.org>
Cc: Jarod Wilson <jarod@redhat.com>
Cc: Christoph Bartelmus <lirc@bartelmus.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] staging: lirc_sir: port to rc-core

Before this driver can be moved out of staging, it should be ported
to rc-core. I've tried to make the minimum changes possible without
upsetting checkpatch.

Compile tested only.

Signed-off-by: Sean Young <sean@mess.org>
Cc: Jarod Wilson <jarod@redhat.com>
Cc: Christoph Bartelmus <lirc@bartelmus.de>
Cc: Milan Pikula <www@fornax.sk>
Cc: Frank Przybylski <mail@frankprzybylski.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] ir-rx51: port to rc-core

This driver was written using lirc since rc-core did not support
transmitter-only hardware at that time. Now that it does, port
this driver.

Compile tested only.

Signed-off-by: Sean Young <sean@mess.org>
Cc: Timo Kokkonen <timo.t.kokkonen@iki.fi>
Cc: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] rc: add support for IR LEDs driven through SPI

The ir-spi is a simple device driver which supports the
connection between an IR LED and the MOSI line of an SPI device.

The driver, indeed, uses the SPI framework to stream the raw data
provided by userspace through an rc character device. The chardev
is handled by the LIRC framework and its functionality basically
provides:

 - write: the driver gets a pulse/space signal and translates it
   to a binary signal that will be streamed to the IR led through
   the SPI framework.
 - set frequency: sets the frequency whith which the data should
   be sent. This is handle with ioctl with the
   LIRC_SET_SEND_CARRIER flag (as per lirc documentation)
 - set duty cycle: this is also handled with ioctl with the
   LIRC_SET_SEND_DUTY_CYCLE flag. The driver handles duty cycles
   of 50%, 60%, 70%, 75%, 80% and 90%, calculated on 16bit data.

The character device is created under /dev/lircX name, where X is
and ID assigned by the LIRC framework.

Example of usage:

        fd = open("/dev/lirc0", O_RDWR);
        if (fd < 0)
                return -1;

        val = 608000;
        ret = ioctl(fd, LIRC_SET_SEND_CARRIER, &val);
        if (ret < 0)
                return -1;

val = 60;
        ret = ioctl(fd, LIRC_SET_SEND_DUTY_CYCLE, &val);
        if (ret < 0)
                return -1;

        n = write(fd, buffer, BUF_LEN);
        if (n < 0 || n != BUF_LEN)
                ret = -1;

        close(fd);

Signed-off-by: Andi Shyti <andi.shyti@samsung.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] Documentation: bindings: add documentation for ir-spi device driver

Document the ir-spi driver's binding which is a IR led driven
through the SPI line.

Signed-off-by: Andi Shyti <andi.shyti@samsung.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] rc-ir-raw: do not generate any receiving thread for raw transmitters

Raw IR transmitters do not need any thread listening for
occurring events. Check the driver type before running the
thread.

Signed-off-by: Andi Shyti <andi.shyti@samsung.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] rc-core: add support for IR raw transmitters

IR raw transmitter driver type is specified in the enum
rc_driver_type as RC_DRIVER_IR_RAW_TX which includes all those
devices that transmit raw stream of bit to a receiver.

The data are provided by userspace applications, therefore they
don't need any input device allocation, but still they need to be
registered as raw devices.

Suggested-by: Sean Young <sean@mess.org>
Signed-off-by: Andi Shyti <andi.shyti@samsung.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>